Proceedings – 14th Annual International Conference on Industrial Engineering and Operations Management, Dubai, UAE, February 11-14, 2024
ISSN: 2169-8767 (U.S. Library of Congress) ISBN: 979-8-3507-1734-1
ID 7 The Paradox of Budget Transparency in Reward-based Crowdfunding
Ehsan Bolandifar, HSBC Business School, Peking University, China
ID 8 Component Procurement Under Unobservable Contracts
Ehsan Bolandifar, HSBC Business School, Peking University, China
Agraja Magesh and Raji Sundararajan, Department of Engineering Technology, Purdue University, West Lafayette, Indiana, USA
Umamagesh Ganesan and Arasu Sekar, LSI-MECH Engineers Pvt Ltd, Chennai, India
ID 14 Understanding Asbestos Free Brake-Pad: Using Carbon Nanotube Derived from Waste Rice Husk
Paul Amaechi Ako (formerly Ozor), Department of Quality and Operations Management, Faculty of Engineering and Built Environment, University of Johannesburg, Auckland Park, South Africa, Department of Mechanical Engineering, Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
Victor Sunday Aigbodion, Faculty of Engineering and Built Environment, University of Johannesburg, Auckland Park, South Africa, Africa Centre of Excellence, ACE-SPED University of Nigeria Nsukka Nigeria, Department of Metallurgical and Materials Engineering, Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
Charles Mbohwa, Department of Quality and Operations Management, Faculty of Engineering and Built Environment, University of Johannesburg, Auckland Park, South Africa
Victor Sunday Aigbodion, Department of Mechanical Engineering Science, Faculty of Engineering and Built Environment, University of Johannesburg, Auckland Park, South Africa, Africa Centre of Excellence for Sustainable power and Energy Development, ACE-SPED University of Nigeria Nsukka Nigeria Department of Metallurgical and Materials Engineering, Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
Paul Amaechi Ako (formerly Ozor), Department of Quality and Operations Management, Faculty of Engineering and Built Environment, University of Johannesburg, Auckland Park, South Africa and Dept. of Mechanical Engineering, University of Nigeria, Nsukka, Nigeria
Charles Mbohwa, Department of Quality and Operations Management, Faculty of Engineering and Built Environment, University of Johannesburg, Auckland Park, South Africa
ID 16 Systemic Approach for Risk-Based Third-Party Inspections of Fire Alarm Systems
Stefan Siegfried Veit, Doctoral Student, Faculty of Electrical Engineering, University of West Bohemia, Pilsen, Czech Republic and TÜV SÜD Industrie Service GmbH, Munich, Germany
Dr. Frantisek Steiner, Professor, Faculty of Electrical Engineering, University of West Bohemia, Pilsen, Czech Republic
ID 17 Unbalanced Bidding in the Jordanian Construction Industry
Khaled Hesham Hyari, Professor, Department of Civil Engineering, Faculty of Engineering, The Hashemite University, Zarqa, Jordan
Thamer Alamayreh, Mostaqbal Engineering & Environmental Consultants, Amman, Jordan
ID 21 Development of a Predictive Maintenance System Using Machine Learning Technique
Osamah Abdulhameed, Naveed Ahmed, Wadea Ameen and Murtadha Aldoukhi, Industrial Engineering Department, College of Engineering and Architecture, Al-Yamamah University, Riyadh-11512, Saudi Arabia
Abdulrahman Al-Ahmari, Moath Alatefi and Ahmed Badewlan, Industrial Engineering Department, King Saud University, Riyadh Saudi Arabia
ID 24 Maintainability Analysis of a Wheel Loader Engine in the Construction Industry
Victor and Chukwuemeka Ajah, Bachelor’s of Engineer, Department of Mechanical Engineering, Falculty of Engineering, University of Nigeria Nsukka, Enugu State Nigeria
Paul Amaechi Ako (formerly Ozor), Department of Mechanical Engineering, Faculty of Engineering, University of Nigeria Nsukka, Nigeria, Department of Quality and Operations Management, Faculty of Engineering and The Built Environment, University of Johannesburg, South Africa Prof
Charles Mbohwa, Department of Quality and Operations Management, Faculty of Engineering and The Built Environment, University of Johannesburg, South Africa
ID 25 Digital Kanban for Agile Production Planning and Scheduling in Automotive Supplier Industry
Johanna Lang, Undergraduate Study Program in Logistics and Digitalization, University of Applied Sciences Amberg-Weiden, Weiden in der Oberpfalz, Germany
Andreas Dörner, Industrial Engineering and Management, University of West Bohemia, Pilsen, Czech Republic, Electrical Engineering, Media and Computer Science, University of Applied Sciences Amberg-Weiden, Amberg, Germany
Stephanie Abels-Schlosser, Weiden Business School, University of Applied Sciences Amberg-Weiden, Weiden in der Oberpfalz, Germany
Gracious Amarachukwu Nwafor, Department of Mechanical Engineering, Faculty of Engineering, University of Nigeria, Nsukka, Enugu, Nigeria
Paul Amaechi Ako (formerly Ozor), Department of Quality and Operations Management, Faculty of Engineering and Built Environment, University of Johannesburg, Auckland Park, South Africa, Department of Mechanical Engineering, Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
Charles Mbohwa, Department of Quality and Operations Management, Faculty of Engineering and Built Environment, University of Johannesburg, Auckland Park, South Africa
Jorge Sebastian Abad-Mendoza, Faculty of Engineering and Architecture, University of Lima, Perú
Miguel Angel Palga-Condori, Faculty of Engineering and Architecture, University of Lima, Perú
Martin Fidel Collao-Díaz, Research Professors, Faculty of Engineering and Architecture, University of Lima, Perú
Claudia Lucia Bonifaz-Roca, Faculty of Engineering, University of Lima, Perú
Gianella Angela Maravi-Vilcas, Faculty of Engineering, University of Lima, Perú
Martin Fidel Collao-Díaz, Research Professor, Faculty of Engineering, University of Lima, Perú
Mariafe Olenka Francia-Barba, Faculty of Engineering and Architecture, University of Lima, Perú
Erick Linder Rosales-Espinoza, Faculty of Engineering and Architecture, University of Lima, Perú
Martin Fidel Collao-Díaz, Research Professors, Faculty of Engineering and Architecture, University of Lima, Perú
S. Bharath Sankar and Muthu Mathirajan, Department of Management Studies, Indian Institute of Science (IISc), Bangalore, Karnataka, India
ID 32 Explainable AI Enhanced Fault Diagnosis of Power Transformer: Unveiling the Black Box
Jeetesh Sharma, Murari Lal Mittal and Gunjan Soni, Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur, 302017, India
Engr. Festus Uche Uwadia, Dr. Emmanuel Innocents Edoun, Prof. Anup Pradhan and Prof. Charles Mbohwa, Faculty of Engineering and Built Environment, Department of Quality & Operation Management, University of Johannesburg, South Africa, Johannesburg, 2028, South Africa
Engr. Festus Uche Uwadia, Dr. Emmanuel Innocents Edoun, Prof. Anup Pradhan and Prof. Charles Mbohwa, Faculty of Engineering and Built Environment, Department of Quality & Operation Management, University of Johannesburg, South Africa
ID 35 Maritime Crime and Security: Pivotal Issues in a Global World
Engr. Festus Uche Uwadia, Dr. Emmanuel Innocents Edoun, Prof. Anup Pradhan and Prof. Charles Mbohwa, Faculty of Engineering and Built Environment, Department of Quality & Operation Management, University of Johannesburg, Johannesburg, 2028, South Africa
Pankaj Chandna, Professor, Mechanical Engineering Department, National Institute of Technology Kurukshetra, Haryana 136119, India Raman and Pawan Bishnoi, Research Scholar, Mechanical Engineering Dept., National Institute of Technology Kurukshetra, Haryana, India
ID 38 Design Approach for an Environmental Impact Monitoring System of an Industrial Unit
Khalid Benhida, Noureddine Dahmani and Sanaa El Hidaoui, LAPSSII, EST de Safi, University Cadi ayyad, Moroco
Percy Esteban Bravo-Zuazo, Faculty of Engineering, University of Lima, Peru
Vanessa Del Rosario Carmelo-Mendieta, Faculty of Engineering, University of Lima, Peru
Martin Fidel Collao-Díaz, Research Professor, Faculty of Engineering, University of Lima, Peru
Roselle P. Alviar, University of Perpetual Help System Dalta – Calamba Campus, Dean, College of Engineering, Calamba City, Laguna, Philippines
Cherry D. Casuat, University of Perpetual Help System Dalta – Calamba Campus, Faculty, College of Engineering, Calamba City, Laguna, Philippines
Johnny P. Belizar, University of Northern Philippines, Director, Infrastructure Project Management and Development Office, Tamag, Vigan City, Ilocos Sur, Philippines
ID 49 A Comparative Study on Heuristic Methods for Transportation Problem
Rupkatha Ghosh and M. Mathirajan, Department of Management Studies, Indian Institute of Science, Bangalore 560012, India
ID 50 Multicriteria Decision Making Methods for Supplier Selection Problems in Construction
M. Keerthna and Tookey J.E., Auckland University of Technology, New Zealand
Rupkatha Ghosh, Indian Institute of Science, Bengaluru, India
ID 51 Electric Vehicle Routing Problem with On-Demand Charging System
İhsan Sadati, Faculty of Engineering and Natural Sciences, Sabanci University, Istanbul, Turkey Smart Mobility and Logistics Lab, Sabanci University, Istanbul, Turkey
Bülent Çatay, Faculty of Engineering and Natural Sciences, Sabanci University, Istanbul, Turkey Smart Mobility and Logistics Lab, Sabanci University, Istanbul, Turkey
ID 52 Auto Insurance Fraud Detection using Machine learning Contrasting US and Moroccan Companies
Sidi Aly Mouna and Kissani Ilham, School of Science & Engineering, Al Akhawayn University, 5300, Ifrane, Morocco
ID 53 Artificial Intelligence (AI) in Engineering Research: An Ethics Perspective
Dr. Lorrainne Doherty, Complementary studies in the School of Mechanical, Industrial and Aeronautical Engineering, University of the Witwatersrand, Johannesburg, South Africa
ID 55 Renewable Resources & Green Hydrogen
Sharaf Fahed Al Wakeel, Department of Industrial & Mechanical Engineering, Qatar University, Doha, Qatar
Syeda Manahil Akhter, Department of Industrial & Mechanical Engineering, Qatar University, Doha, Qatar
ID 57 Net Zero Carbon Retrofitting of Existing Buildings – A Bibliometric Study
Lichini Nikesha Kumari Weerasinghe, Amos Darko and Albert P.C. Chan, Department of Building and Real Estate, The Hong Kong Polytechnic University, Hong Kong
Ndivhuwo Nemtajela, Lecturer, Department of Operations Management, College of Economic and Management Sciences, University of South Africa, Pretoria, South Africa
Jan-Harm Christiaan Pretorius and Andre Vermeulen, Department of Engineering Management, Faculty Engineering and the Built Environment University of Johannesburg, Johannesburg, South Africa
Tugba Danaci, Fatma Senses VS Business Administration Department, Member, Public University-Industry Collaboration Committee, Kirikkale University, Kirikkale, TURKIYE, DEDA Technology Investment Ltd, Ankara, TURKIYE
ID 65 Challenges and Opportunities in Implementing Digital Solutions in Cold Chain Logistics in Oman
Ali al Kalbani, Senior Lecturer, Middle East College, Muscat, Oman
Dr. Reason Masengu, Senior Lecturer, Middle East College, Muscat, Oman
Jowhara al Habsi, Lecturer, University of Technology and Applied Sciences, Muscat Oman
Goitom Abera Baisa, Ph.D. Student, Faculty of Engineering and Technology, Liverpool John Moores University, UK
Dante Benjamin Matellini, Faculty of Engineering and Technology, Liverpool John Moores University, Uk
Tugba Danaci, Fatma Senses VS Business Administration Department, Member, Public University-Industry Collaboration Committee, Kirikkale University, Kirikkale, Turkey and DEDA Technology Investment Ltd, Ankara, Turkey
Ghadah M Khushail, Ghaida Fahad Alqarni, Refan M Alshahrani and Reema M Almotawa, Undergraduate Student in Mechanical Engineering Department-Industrial Engineering Program, College of Engineering, University of Bisha, Bisha 61922, Saudi Arabia
Khaled Ali Abuhasel, Full Professor in Mechanical Engineering, Department-Industrial Engineering Program, College of Engineering, University of Bisha, Bisha 61922, Saudi Arabia
Maha N Alshehri, Hadeel A Alshahrani, Maali Sh Alshahrani, Sheikha M Alshehri and Abeer H Alaklobi, Undergraduate Student in Mechanical Engineering, Department-Industrial Engineering Program, College of Engineering, University of Bisha, Bisha 61922, Saudi Arabia
Khaled Ali Abuhasel, Full Professor in Mechanical Engineering, Department-Industrial Engineering Program, College of Engineering, University of Bisha, Bisha 61922, Saudi Arabia
Wadea Ameen, Industrial Engineering Department, College of Engineering and Architecture, Alyamamah University, Riyadh-11512, Saudi Arabia
ID 89 Quality Assurance Machine for Software Using Machine Learning
Shane Downing and M. Affan Badar, Bailey College of Engineering and Technology, Indiana State University, Terre Haute, IN 47809, USA Christopher J. Kluse, Faculty of College of Technology, Architecture and Applied Engineering, Bowling Green State University, Bowling Green, OH 43403 USA
ID 91 An Insight into Tasnee’s Supply Chain Strategy for Polymer Products
Bandar S. Aljabri, Abdullah A. Alsaleh and Mohamed S. Alkahtani, Department of Industrial Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia
Omar AlJuraiyed, Husam AlGhamdi and Mohammed AlKahtani, Department of Industrial Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia
Yating Liu, Department of Industrial Engineering and Management, Graduate School of Engineering, Kanagawa University, Kanagawa, Japan
Yuki Mekata and Hideki Katagiri, Department of Industrial Engineering and Management, Faculty of Engineering, Kanagawa University, Kanagawa, Japan
ID 95 Life-Cycle Environmental and Economic Impacts of Alternative Fuel Buses
Noura Elagouz, Research Assistant, Qatar Transportation and Traffic Safety Center, College of Engineering, Qatar University, Doha, Qatar
Nuri Onat, Associate Professor, Qatar Transportation and Traffic Safety Center, College of Engineering, Qatar University, Doha, Qatar
Muhammet Enis Bulak, Assistant Professor, Department of Industrial Engineering, Uskudar University, Istanbul, Turkey
Murat Kucukvar, Associate Professor, Department of Business Ethics and Legal Studies, Daniels College of Business, University of Denver, Denver, CO, USA
Nannan WANG, IESEG School of Management, 59000 Lille, France
Linda L. ZHANG, IESEG School of Management, Univ. Lille, CNRS, UMR 9221 – LEM – Lille Economie Management, F-59000 Lille, France
ID 97 A Conceptual Framework for Understanding Impostor Phenomenon in Entrepreneurs
Mehak, Student, Department of Management Studies, Indian Institute of Science, Bangalore, India
Anjula Gurtoo, Professor, Department of Management Studies, Chairperson, Centre for Society & Policy, Indian Institute of Science, Bangalore, India
ID 99 Improving the Processes by Applying Lean Six Sigma Tool (VSM): Case Study in KSA
Ali Almuflih, Assistant Professor in the department of Industrial Engineering at King Khalid University (KKU), Saudi Arabia M.Sc. degree in the Department of Mechanical & Industrial Engineering at Northeastern University
Abrar Alamri, Afnan Asiri, Reema Alshahrani, Ruwayda Shawkhan and Samar Alshahrani, Senior Industrial Engineering at King Khalid University (KKU), Saudi Arabia
ID 100 A Roadmap for Intelligent Agriculture in Africa – A Case Study of Sub-Saharan Africa
Anthony Anosike, Centre for Supply Chain Improvement, University of Derby, Derby, UK Udoka Silas, Globaia Research, 8 Seke Abimbola Street, Okota, Lagos, Nigeria
Pouria Liravi, Centre for Supply Chain Improvement, University of Derby, Derby, UK
ID 102 Reducing Risks in Maintenance of High-Voltage Transmission Lines
Nuttanicha Panich and Jittra Rukijkanpanich, Department of Industrial Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok, Thailand
ID 103 A Cost-Effective Approach for Inventory- Transportation to Address Carbon Tax Policy
Zheng Wang, Ayham Jaaron and Reza Eslamipoor, Faculty of Business and Law, De Montfort University, Leicester, UK
ID 106 A Revised Formulation for the Airline Fleet Assignment Problem
Alaa Ahmed, Bassant Nabil, Hadi Fors and Ahmad E. Elhabashy, Production Engineering Department, Alexandria University, Alexandria, Egypt
Amir R. A. Dezfoli, Assistant Professor, Department of Intelligent Automation Engineering, National Chin-Yi University of Technology, Taichung, Taiwan
Basem A. Alkhaleel, Department of Industrial Engineering, King Saud University, Riyadh 11421, Saudi Arabia
ID 118 Automated Machine Learning Algorithms for Long-Term Time Series Forecasting
Ying Su and Morgan C. Wang, Department of Statistics and Data Science, University of Central Florida, Orlando, Florida 32816, USA
Ali Saeed Almuflih, Chair, Industrial Engineering department, College of Engineering, King Khalid University, Saudi Arabia
Bensekhria Nardjesse, Assistant Professor in occupational Medecine, Faculty of Medecine, University of Batna 2, Fesdis, Batna, Algeria
Benhassine Wissal, Professor in occupational Medecine, Faculty of Medecine, University of Batna 2, Fesdis, Batna, Algeria
Rusdi Akbar, Faculty of Economics and Business, Universitas Gadjah Mada, Yogyakarta, Indonesia
Agus Bayu Santoso, Directorate General for Treasury, Ministry of Finance, Jakarta, Indonesia
Wissal Benhassine, Professor, Faculty of Medecine, Head Doctor of Occupational health Service, University Hospital Center of Batna, University of Batna 2, Fesdis, Batna, Algeria
Ismahane Maache, Resident Doctor, Faculty of Medecine, University of Batna 2, Fesdis, Batna, Algeria
Benaicha Samia, Assistant Professor in occupational Medecine, University of Batna 2, Fesdis, Batna, Algeria
Bensakhria Nardjesse, Assistant Professor in occupational Medecine, University of Batna 2, Fesdis, Batna, Algeria
ID 126 Energy Efficiency of Carajás Railway
Fernando Nunes da Silva, Operational Analyst, Operational reliability of EFC, Carajás Railroad to Vale S.A., São Luís, MA – Brazil
Denio Oliveira da Fonseca, Operational Analyst, Railway Engineering of EFC, Carajás Railroad to Vale S.A., São Luís, MA – Brazil
Gerisval Alves Pessoa, Specialist in Operational Excellence, Carajás Railway (EFC) – North Corridor – VALE S.A., São Luís, MA – Brazil
Francisco Alves de Araujo Filho and Andre de Araujo Pereira e Abdo Fran Frances de Sousa, Inspector Mentor, Railway Operation EFC, Carajás Railroad to Vale S.A., Av. dos Portugueses, S/N Anjo da Guarda, CEP 65085 580 São Luís, MA – Brazil
Carlos Hernández, Jaime Castillo, Dafne Lagos and Paola Leal, Departamento de Procesos Industriales, Universidad Católica de Temuco, Chile
ID 129 Air Freight Specialist Evaluation with F-AHP-TOPSIS
Funda Samanlioglu, Efe Coştu, Emin Ali Öztürk, Fırat Yaymanoğlu and Nisa Genç, Department of Industrial Engineering, Kadir Has University, Istanbul, Turkey
Dima Jawad, Associate Professor, Engineering Management Graduate Program, Faculty of Engineering and Applied Science, Ontario Tech University, Oshawa, Ontario, Canada
Seiyed Hamid Mousavi, Master of Engineering in Engineering Management, Engineering Management Graduate Program, Faculty of Engineering and Applied Science, Ontario Tech University, Oshawa, Ontario, Canada
ID 133 Benchmarking Engineering Management Graduate Program at the Onset of the AI Era
Dima Jawad, Associate Professor, Engineering Management Graduate Program, Faculty of Engineering and Applied Science, Ontario Tech University, Oshawa, Ontario, Canada
ID 134 Logistics of EV Batteries in Germany – State of the Art
Max Plotnikov, Department of Software & Information Engineering, Research Associates, Fraunhofer Institute for Material Flow and Logistics, Dortmund 44263, Germany
ID 135 Epidemiological Aspects and Cause of Deaths of Algerian Doctors during the Period 2010 – 2020
Wissal Benhassine, Professor, Faculty of Medecine, Head Doctor of Occupational health Service, University Hospital Center of Batna, University of Batna 2, Fesdis, Batna, Algeria
Amira Khomri, Specialist Doctor in Occupational Medecine, EPSP Elmadher, Batna, Algeria
Nardjesse Bensekhria, Assistant Professor in occupational Medecine, University of Batna 2, Fesdis, Batna, Algeria Benaicha
Samia, Assistant Professor in occupational Medecine, University of Batna 2, Fesdis, Batna, Algeria
Axel Díaz Guevara, Mariel Perez Reyes, and Rafael Chavez-Ugaz, Facultad de Ingeniería, Universidad de Lima, Peru
Cheng Jia Yan, Hawa Hishamuddin, Hilmi Hisyam Naimin, Noorhelyna Razali, Nizaroyani Saibani and Mohd Nizam Ab Rahman, Department of Mechanical Engineering and Manufacturing, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Selangor, Malaysia
Alonso Geronimo, Sebastian Gratelly and Nicolas Salazar, School of Engineering, Dept. of Industrial Engineering, University of Lima, Lima, Perú
ID 139 Organizational Culture and Innovation in Aerospace Industry´S Smes in Mexico
Christian Muñoz-Sánchez, Dulce María Monroy-Becerril, Jorge Alejandro Silva Rodríguez de San Miguel and Eugene Hakizimana, Business School (ESCA-STO), National Polytechnic Institute of Mexico (IPN), Mexico City, Mexico
Osamah Abdulhameed, Industrial Engineering Department, College of Engineering and Architecture, Al-Yamamah University, Riyadh, Saudi Arabia
ID 141 Reliability and Maintenance Optimization at a Saudi Glass Production Plant
Meshary F. Alsaif, Fahad B. Al-Askar and Basem A. Alkhaleel, Department of Industrial Engineering, King Saud University, Riyadh, Saudi Arabia
ID 146 Size Controlled Palladium Nanoparticles for Liquid Phase Transfer Dehydrogenation of Alcohols
Reem AlBilali, Assistant Professor of Physical Chemistry, Department of Chemistry, College of Science, Imam Abdulrahman Bin Faisal University, P.O. Box 1982, Dammam 31441, Saudi Arabia
ID 147 Blockchain Technology Integration with Additive Manufacturing: Analysis of Challenges
Jaya Priyadarshini and Rajesh Kumar Singh, Management Development Institute, Gurgaon, Haryana, India
Jinil Persis, Indian Institute of Management Kozhikode, Kerala, India
Valeria Laynes Fiascunari and Luis Rabelo, Department of Industrial Engineering and Management Systems, University of Central Florida, Orlando, Florida, USA
Edgar Gutiérrez-Franco, Center for Transportation and Logistics, Massachusetts Institute of Technology, Cambridge, MA, USA
ID 154 Exploring Information System Disruptions in Government Operations
Mohammed M. AlHajri, Graduate Student Engineering Management Program, Department of Mechanical and Industrial Engineering, Qatar University, Doha, Qatar
ID 155 Selection of an Artificial Intelligence Forecasting Approach for PV Panel Prices
Aisha Alhosani, Department of Industrial and Systems Engineering, Khalifa University of Science and Technology, Abu Dhabi, 127788, UAE
Saed Amer, Faculty Member, Department of Management Science and Engineering, Khalifa University of Science and Technology, Abu Dhabi, 127788, UAE
Andrei Sleptchenko, Associate Professor, Department of Management Science and Engineering, Khalifa University of Science and Technology, Abu Dhabi, 127788, UAE
ID 156 Ecosystem of Goods and Value Creation
Eugene Hakizimana, Lecturer and researcher at Escuela Superior de Comercio y Administración (Santo Tomás unit), of the National Polytechnic Institute (IPN), Mexico
Christian Muñoz-Sánchez, Professor at Instituto Politécnico Nacional (IPN), Escuela Superior de Comercio y Administración (ESCA-STO) in Mexico City, Mexico
Dulce María Monroy Becerril, Professor-researcher at Escuela Superior de Comercio y Administración (Santo Tomás unit), of the National Polytechnic Institute (IPN), Mexico
Alonso Rojas Rodríguez, Lecturer, and researcher at Escuela Superior de Comercio y Administración (ESCA-STO), Instituto Politécnico Nacional (IPN)-Mexico
Jorge Alejandro Silva Rodríguez de San Miguel, Professor-researcher at Escuela Superior de Comercio y Administración (Santo Tomás unit), of the National Polytechnic Institute (IPN), Mexico
ID 158 Addressing Sustainability in African Airports
Caroline K. Marete, Visiting Assistant Professor, School of Aviation and Transportation Technology, Purdue University, West Lafayette, IN, USA
Patrick Mukala, Faculty of Engineering and Computer Science, University of Wollongong in Dubai, Dubai, UAE
Obaid Ulah, Faculty of Engineering and Computer Science, University of Wollongong in Dubai, Dubaï, UAE
Nusrat Jahan Raka and Stanislav Chankov, Constructor University, Bremen, Germany
ID 162 Sustainable Construction of Deep-Water Injection Wells: A Life Cycle Assessment Approach
Gamaleldin Farag, Master Student, Department of Mechanical & Industrial Engineering, College of Engineering, Qatar University, Doha, Qatar
Dr. Kadir Ertogral, Associate Professor, Department of Mechanical & Industrial Engineering, College of Engineering, Qatar University, Doha, Qatar
ID 163 Single Objective Functions in Location Routing Problems: A Comparative Case Study
Osama Alotaik, Industrial Engineering Department, King Saud University, Riyadh, Saudi Arabia
Mohamed Osman, Transport systems and logistics, Faculty of Engineering, University of Duisburg-Essen, 47058 Duisburg, Germany
Fengkai Xu, Faculty of Engineering, University of Duisburg-Essen, 47058 Duisburg, Germany
ID 165 Industrial Design Structure (IDeS) For A New Hybrid Sport Coupé Car
Pontieri Francesco, Sgubbi Daniele, Pecoraro Lorenzo and Pagliari Curzio, Department of Industrial Engineering, Alma Mater Studiorum University of Bologna, Bologna, Italy
Andy R. Tineo and Almanzor E. Vila, Department of Industrial and Systems Engineering, Pontificia Universidad Católica Madre y Maestra, Santiago 51000, Dominican Republic
Dr. Richard Olawoyin, School of Engineering and Computer Science, Oakland University, Rochester, MI 48309, USA
Stephen Davis and Dr. Timothy Kotnour, University of Central Florida, Department of Industrial Engineering & Engineering Management, Orlando, FL, USA
Dr. Serina Al-Haddad, Rollins College, Department of Business, Winter Park, FL, USA
Misbah Burhanudin, Project Management Office Upstream PT Pertamina Persero, Industrial Engineering, Bandung Institute of Technology, Indonesia
Dian Vita Alpha Suandi, Project Management Office Downstream PT Pertamina Persero, Industrial Engineering, Energy Management Executive MBA, Bandung Institute of Technology, Indonesia
Andrew Couch, Engineering Research Fellow, Stanford University, Stanford, California, USA, Engineering Research Fellow, National Institute of Standards and Technology, Gaithersburg, Maryland, USA
Yan Lu, Deputy Chief of Systems Integration Division, National Institute of Standards and Technology, Gaithersburg, Maryland, USA
Alonso Parodi and Sergio Montañez, University of Lima, Industrial Engineering Career, Lima, Peru
Rafael Chavez Ugaz, University of Lima, Faculty of Engineering, Lima, Perú
Tomas Agustin Bas, Department of Mathematical and Industrial Engineering, Polytechnique Montreal, Montreal QC, Canada
Samira Keivanpour, Department of Mathematical and Industrial Engineering, Polytechnique Montreal, Montreal QC, Canada
Asad Yarahmadi, Department of Civil, Geological and Mining Engineering, Polytechnique Montréal, Montréal, Canada
Prithvirajan D and Mathirajan M, Department of Management Studies, Indian Institute of Science, Bangalore 560012, India
Wissal Benhassine, Professor, Faculty of Medecine, Head Doctor of Occupational health Service, University Hospital Center of Batna, University of Batna 2, Fesdis, Batna, Algeria
Mohamedi Siham, Specialist in occupational medicine, Occupational Service – Local Public Health Establishment of Batna, Algeria
Benaicha Samia, Assistant Professor in occupational Medecine, University of Batna 2, Fesdis, Batna, Algeria
Bensakhria Nardjesse, Assistant Professor in occupational Medecine, University of Batna 2, Fesdis, Batna, Algeria
Fakir Sheik Zihad, Manager (Product Development), Super Star Group, Engineer, Master’s in Industrial Engineering, Lamar University, Beaumont, Texas, USA
Asif Mohammad Mithu, Graduate Research Assistant at Biomedical Signals, Systems and Analysis Laboratory, Ph.D. in Electrical Engineering Villanova University, Villanova, Pennsylvania, USA
Mehrab Masayeed Habib, Engineer, Master’s in Electrical Engineering, Lamar University, Beaumont, Texas, USA
Mrinmoy Sen, Manager (Product Development), Super Star Group, Engineer, BSc. In Mechanical Engineering, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh
Md. Yasin Arafat, Engineer, Master’s in Industrial Engineering, Lamar University, Beaumont, Texas, USA
ID 181 A Study of a 2-Unit Cold Standby Repairable System Operating in a Multi-Level Environment
VSS Yadavalli, Department of Industrial and Systems Engineering, University of Pretoria, South Africa
S Udayabaskaran, Vel Tech Rangarajan Dr. Sagunthala R & D Institute of Science and Technology
Chennai, India
ID 182 Analysis of Hemp Stem Reinforced Concrete Composites
Som R. Soni, AdTech Systems Research Inc., 1342 North Fairfield Road, Beavercreek, Ohio 45432, USA
Craig Schluttenhofer and Subramania I. Sritharan, Agricultural Research and Development Program (ARDP), Central State University, 1400 Brush Row Road, Wilberforce, OH 45384, USA
ID 202 The Influence of the Planning and Execution Mode on Effective Infrastructure Delivery
Edoghogho Ogbeifun, Civil Engineering Department, Faculty of Engineering, University of Jos
Jan-Harm C. Pretorius, Postgraduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Mariam Afilal and Asmae Bakry, Mines Saint-Etienne, 42023, Saint-Etienne, France
Khaled Medini, Mines Saint-Etienne, Univ Clermont, INOP Clermont Auvergne, CNRS, UMR 6158 LIMOS, 42023, Saint-Etienne, France
ID 209 Job scheduling on Identical Parallel Machines to Minimize Total Tardiness
Pravin P. Tambe, Faculty of Operations Management and Decision Sciences, Indian Institute of Management Tiruchirappalli, Tiruchirappalli, India
Yasir Aljefri, Abdullah Alrabghi and Abdulaziz Altabsh, Department of Industrial and Systems Engineering, University of Jeddah, Saudi Arabia
ID 214 Meditation for Human Integration
Som R. Soni and Gita D. Soni, AdTech Systems Research Inc., 1342 North Fairfield Road, Beavercreek, Ohio 45432, USA
Mona Haji, College of Science and Engineering, Hamad Bin Khalifa University, Doha, Qatar
Utloa, T. M., Ogbeifun, E. and Pretorius, J. H. C., Postgraduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 219 Allocation Optimization of An Electrical Vehicle Charging Station Using Ant Colony Algorithm
Sulistyo Prabowo Adhi Karno, Agus Ristono and Apriani Soepardi, Department of Industrial Engineering, Faculty of Industrial Engineering Universitas Pembangunan Nasional Veteran, Yogyakarta, Indonesia
N. Chenouf, N. Bensekhria, H.K. Hassinet And W. Benhassine, Occupational Health Service – CHU of Batna, Algeria
ID 227 Investigation And Analysis of a Fatal Occupational Accident
N.Chenouf and W. Benhassine, Occupational Health Service, University Hospital Center Batna, Algeria
ID 228 An Alternative Approach to Building Inspection Challenges in South African Municipalities
Maphutha Letsau Khutso and Morena William Nkomo, Department of Construction Management and Quantity Surveying, University of Johannesburg, Johannesburg, RSA
Stephan Molusiwa Ramabodu, Department of Construction Management and Quantity Surveying, University of Johannesburg, Johannesburg, RSA
ID 230 Increase in Productivity of the Iron Ore Loading Terminal
Ana Giorgia Viana Pestana, Analyst in Operational Excellence, Carajás Railway (EFC) – North Corridor – VALE S.A., São Luís, MA – Brazil
Fabio Pereira da Costa, Senior Engineer, Railway Operation EFC, Carajás Railroad to Vale S.A., São Luís, MA – Brasil
Fernando Nunes da Silva, Operational Analyst, Operational reliability of EFC, Carajás Railroad to Vale S.A., São Luís, MA – Brasil
Gerisval Alves Pessoa, Specialist in Operational Excellence, Carajás Railway (EFC) – North Corridor – VALE S.A., São Luís, MA – Brazil
Jamison Miranda Souza, Supervisor of Railway Operations, Railway Operation EFC, Carajás Railroad to Vale S.A., São Luís, MA – Brasil
José Magno Martins Pereira, Operational Analyst, Railway Engineering of EFC, Carajás Railroad to Vale S.A., São Luís, MA – Brasil
Manoel Maciel da Silva de Araujo, Yard Control Center Coordinator, Railway Operation EFC, Carajás Railroad to Vale S.A., São Luís, MA – Brasil
Thiago Cardoso Nunes, Inspector Mentor, Railway Operation EFC, Carajás Railroad to Vale S.A., São Luís, MA – Brasil
Thiago de Oliveira Pinheiro, Operations Manager, Railway Operation EFC, Carajás Railroad to Vale S.A., São Luís, MA – Brasil
Valdeilton Nunes Sobrinho, Mine Operations Supervisor, Railway Operation EFC, Carajás Railroad to Vale S.A., São Luís, MA – Brasil
Liyanage Kapila, Senior Lecturer in Engineering Management, College of Science and Engineering, The University of Derby, Derby, UK
Onyeme Chinedu, Ph.D. Researcher, College of Science and Engineering, The University of Derby, Derby, UK
ID 232 Goal Programming Model for Sustainability and Circular Economy Evaluation
Noushin Bagheri, SP Jain School of Global Management, Dubai, UAE
Fouad Ben Abdelaziz, NEOMA Business School, Rouen, France
Beryl Amatta and Mouhamad Shaker Ali Agha, Department of Management Science, University of Strathclyde, Glasgow, UK
ID 257 Patient Appointment Scheduling at Hemodialysis Centers: an Exact Branch and Price Approach
Mohammad REIHANEH, IESEG School of Management, Univ. Lille, CNRS, UMR 9221 – LEM – Lille Economie Management, Lille, France
ID 260 Two-Dimensional Modeling of Aquatic Surfaces Based on Obstacle Detection and Distance Measurement Using Ultrasound
Diego Cerna, Bryan Vega, Professional School of Mechatronic Engineering, Engineering faculty, Ricardo Palma University, Lima, MI 15039, PERU
Mario Chauca, Engineering Research for Science and Technology research group (ERSTECH), Ricardo Palma University, Lima, MI 15039, PERU
Rahul Saha, Assistant Professor, Chemical Engineering Dept., National Institute of Technology Hamirpur, Hamirpur, Himachal Pradesh, India
ID 263 An Investigative Examination of Subscription Models in The Service Industry
Mohit Tyagi, Indian Institute of Technology Delhi, India
ID 264 Utilization of KB Field Flare Gas for Own Use Gas Fuel and Commercial Sales Gas
Panglima M. S. Asihono, Achmad F. Mahyuddin and Fahmi M. Putra, Engineering & Planning Project Department, PT. Pertamina Hulu Rokan Zona 4, Prabumulih, South Sumatera, Indonesia
El Mehdi Guendouli and Sofiene Dellagi, Laboratoire de Génie Informatique, de Production et de Maintenance – LGIPM, Université de Lorraine Metz, France
Lahcen Mifdal and El Mehdi Kibbou, Laboratoire InterDisciplinaire de Recherches Appliquées – LIDRA, Université Internationale d’Agadir – Universiapolis, Agadir, Maroc
Abdelhadi Moufki, Laboratoire d’Etude des Microstructures et de Mécanique des Matériaux, LEM3, UMR CNRS, Université de Lorraine, Metz, France
ID 272 Integrated Time Series Analysis for Long Term Demand Planning and Capacity Expansion
Ibrahim M.G. Khayat, Mohammed F. Hariri, Mohammed H. Baggazi, Yousef J. Bassyoni and Ammar Y. Alqahtani, Department of Industrial Engineering, Faculty of Engineering, King Abdulaziz University, P.O. Box 80204, Jeddah 21589, Saudi Arabia
Temitope Omotayo, Jiamei Deng and Shohrab Hossain, School of Built Environment, Engineering and Computing, Leeds Beckett University Leeds, United Kingdom
Shakeel Khan and Milan Parmar, 21 Borrowdale Close, Ilford, England, IG4 5LS, United Kingdom
ID 275 Design and Fabrication of Multi-functional Fixture with Experimental Case Studies
Naveed Ahmed, Industrial Engineering Department, College of Engineering and Architecture, Alyamamah University, Riyadh-11512, Saudi Arabia
Bensekhria Nardjesse and Wissal Benhassine, Faculty of Medicine, University of Batna 2, Algeria
ID 277 Integration Between PMBOK 7th Concepts: A Network Analysis
Luisa Zambrano, Edison Atencio, Costanza Mariani and Mauro Mancini, Department of Management, Economics and Industrial Engineering, Politecnico di Milano, Via Lambruschini 4b, Bovisa, 20156 Milan, Italy
Edison Atencio, Department of Civil Engineering, Pontificia Universidad Católica de Valparaíso, Av. Brasil 2147, 2340000, Valparaíso, Chile
Luisa Zambrano, Edison Atencio, Costanza Mariani and Mauro Mancini, Department of Management, Economics and Industrial Engineering Politecnico di Milano, Via Lambruschini 4b, Bovisa, 20156 Milan, Italy
Edison Atencio, Department of Civil Engineering, Pontificia Universidad Católica de Valparaíso, Av. Brasil 2147, 2340000, Valparaíso, Chile
ID 281 Millet Thali (Food Basket) for Transforming Nutrition Intake
Pratik Badgujar, PhD Research Scholar, Department of Mechanical Engineering, Indian Institute of Technology Delhi, New Delhi, India
Nomesh B. Bolia, Professor, Department of Mechanical Engineering, Indian Institute of Technology Delhi, New Delhi, India
Reem Adel Abdallah, Department of Industrial Engineering and Engineering Management University of Sharjah, Sharjah, United Arab Emirates
Eman Mastour Alqarni, Leen Ahmad AlBinAli and and Raafat Elshaer, Industrial Engineering Department, Collage of Engineering, King Khalid University Abha, Kingdom of Saudi Arabia
ID 284 Exploring the Capacity of Engineers to Perform the Capital Budgeting Function Effectively
Afia Amoa-Mensah, Edoghogho Ogbeifun and Jan-Harm C. Pretorius, Postgraduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South A
Khathutshelo Mushavhanamadi, Lebogang Margret Seopela, Faculty of Engineering and Built Environment Department of Quality and Operations Management, University of Johannesburg, South Africa
Alyaziya Al Jaberi, Department of Engineering Systems and Management, Khalifa University, Abu Dhabi, UAE
Saed Amer, Department of Engineering Systems and Management, Khalifa University, Abu Dhabi, UAE
Ahmad Mayyas, Department of Engineering Systems and Management, Khalifa University, Abu Dhabi, UAE
Louai Maghrabi, Mariam Mohammed and Alia AlAydaroos, MSc. Students Mechanical Engineering Department, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates
Maryam Almarzooqi, MSc. Student Biomedical Engineering Department, Khalifa University of Science and Technology, Abu Dhabi, UAE
Yasmina Alseksek, MSc. Students Chemical Engineering Department, Khalifa University of Science and Technology, Abu Dhabi, UAE
Dr. Saed Amer, Faculty Member Industrial and Systems Engineering Department, Khalifa University of Science and Technology, Abu Dhabi, UAE
Ahmed Boulahoual and Khalid Benhida, LAPSSII, EST de Safi, University Cadi Ayyad, Morroco
ID 289 Enabling Collaborative Resource Sharing in the Pharmaceutical Industry During Disruption:
Mustapha Saidi Atanda and Mouhamad Shaker Ali Agha, Department of Management Sciences, University of Strathclyde, Glasgow, UK
Tariq Masood, Department of Design, Manufacturing and Engineering Management, University of Strathclyde, Glasgow, G1 1XQ, United Kingdom
Soham Das, Ph.D. student, Department of Mechanical Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi, Delhi, India
Varun Ramamohan, Assistant Professor, Dept. of Mechanical Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi, India
Sana Latif, American University of Sharjah, Sharjah, UAE
Abdelaziz Saeed Alzaabi, Team Leader Mechanical Maintenance, ADNOC Offshore, Abu Dhabi, 303, UAE
Andrei Sleptchenko, Associate Professor at the Department of Industrial and Systems Engineering Khalifa University, Abu Dhabi, 127788, UAE
Kehinde G. Ismaila, Adriana F. Gabor and Maher Maalouf, Department of Management Science and Engineering, Khalifa University, Abu Dhabi, United Arab Emirate UAE
Andrei Sleptchenko, Department of Mathematics, Khalifa University, Abu Dhabi, U.A.E
ID 311 Analysis of Bolt Failure Locations for Predictive Maintenance
Yasmin Musa, Department of Career Readiness- Mechatronics, Motlow State Community College, Smyrna, TN, USA
Khalid H. Tantawi, Assistant Professor, Department of Engineering Management and Technology, University of Tennessee, Chattanooga, TN, USA
Omar Tantawi, Department of Career Readiness- Mechatronics, Motlow State Community College, Smyrna, TN, USA
ID 312 A Systematic Review of Simulation Literature in Blood and Blood Components Supply Chains
Eliana de Jeus Lopes, Leandra Silvestre da Silva Lima and Marina Bouzon, Department of Production and Systems Engineering, Federal University of Santa Catarina, Caixa Postal 476, 88040-900, Florianopolis, SC, Brazil
Marwen Elkamel and Luis Rabelo, Industrial Engineering & Management Systems Department, University of Central Florida, Orlando, FL, USA
Sultan J. Enani, Bader A. Alalshaik, Majed M. Fallata, Albaraa R. Gazzaz and Ammar Y. Alqahtani, Department of Industrial Engineering, Faculty of Engineering, King Abdulaziz University, P.O. Box 80204, Jeddah 21589, Saudi Arabia
Rizki Akbar Sofyan and Teuku Yuri M. Zagloel, Department of Industrial Engineering, Universitas Indonesia, Depok, Jawa Barat 16424, Indonesia
Hussain VMS, Department of Mechanical and Manufacturing Engineering, National Institute of Advanced Manufacturing Technology, Ranchi – 834 003. India
Naikan VNA, Professor, Subir Chowdury School of Quality and Reliability, Indian Institute of Technology, Kharagpur, Kharagpur – 721 302, India
Md. Israr Equbal, Mechanical Engineering Section, University Polytechnic, Aligarh Muslim University, Aligarh-202 002, India
Abdulrahman A. Jamaluddin, Ibrahim A. Alkathiri, Waleed A. Alghmadi, Hamza A. Khadawardi and Ammar Y. Alqahtani, Department of Industrial Engineering, Faculty of Engineering, King Abdulaziz University, P.O. Box 80204, Jeddah 21589, Saudi Arabia
ID 320 The Power of Testing Parameter on the Specified Continuous Distributions
Budi Pratikno, Department of Mathematics, Faculty of Mathematics and Natural Science, Jenderal Soedirman University, Purwokerto, Indonesia, Jl. Dr. Soeparno 61 Karangwangkal, Purwokerto, Banyumas, 53122, Central of Java, Indonesia
Alfa Annisa Pratama, Department of Mathematics, Faculty of Mathematics and Natural Science, Jenderal Soedirman University, Purwokerto, Indonesia, Jl. Dr. Soeparno 61 Karangwangkal, Purwokerto, Banyumas, 53122, Central of Java, Indonesia
Sultan Alkaabi, Operation Manager, KWMS. Muscat, Sultanate of Oman, Oman
Abu Bakar Abdul Hamid, Professor, Faculty of Business Information and Human Science, Infrastructure University Kuala Lumpur, Malaysia
Samar Algalebi, Head sustainability strategy and Growth, Falak Tayyeb Platinum Government Services L.L.C Dubai, UAE
Issa Alrawahi, Operation Manager, Operation Department. Etihad Airways. Abu Dhabi, UAE
Billy Peter Munyenyembe, Department of Engineering, Information and Communications University, Lusaka, Zambia
Penjani Hopkins Nyimbili, Lecturer, Department of Geomatics Engineering
University of Zambia, Lusaka, Zambia
Erastus Misheng’u Mwanaumo, Ag. Director – Directorate of Research and Graduate Studies
University of Zambia, Lusaka, Zambia, Professor Emeritus
University of South Africa (UNISA), Pretoria, South Africa
Wellington Didibhuku Thwala, Executive Dean, Faculty of Engineering, Built Environment and Information Technology, Walter Sisulu University, Eastern Cape, South Africa
ID 332 Big Data and Machine Learning Methods to Secure the Internet Sites
Jongwook Sung and Taeho Park, San Jose State University, CA, USA
ID 336 Berth Allocation Problem in Container Terminal TangerMed Morocco
Kissani Ilham, Zine Rabie and Malih Aya, School of Science & Engineering, Al Akhawayn University, 5300, Ifrane, Morocco
ID 338 An Optimized Ball and Plate System Based on a PID Controller
Eng. Abdullah Tahir, Sales Engineer, ALMASA Environmental Solutions, Sharjah, United Arab Emirates (UAE)
Maisam Wahbah, College of Engineering and Information Technology (CEIT), University of Dubai, Dubai 14143, Department of Biomedical Engineering, Khalifa University, Abu Dhabi, United Arab Emirates (UAE)
Husameldin Mukhtar, College of Engineering and Information Technology (CEIT), University of Dubai, Dubai 14143, United Arab Emirates (UAE)
ID 339 A Time-Discretized Linear Integer Programming Model for Vacation Route Planning
Luca Romagnoli, University of Waterloo Department of Chemical Engineering, University of Waterloo, Waterloo, ON, Canada
Ali Elkamel, Department of Chemical Engineering, Khalifa University, Abu Dhabi, UAE and Department of Systems Design Engineering and Department of Chemical Engineering, University of Waterloo, Waterloo, ON, Canada
Mohamed Edali, Asma Milad and Hanadi Saad, Department of Chemical Engineering, Elmergib University, Elkhoms, Libya
Zaed Sahem, Engineering & Creativity Group for technical services, Ottawa, Ontario, Canada
Tareq Alajaili, Department of Management, Faculty of Commerce, Elmergib University, Libya
Ali Elkamel, Department of Chemical Engineering, Khalifa University, Abu Dhabi, UAE and Department of Systems Design engineering and Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
ID 341 Developing Design Rules for Fused Deposition Modeling Technology
Wadea Ameen, Murtadha Aldoukhi, Abdullah Alsalem, Rayan Alkhattabi, Ibrahim Albabtain, Abdullah Abahussain and Wasim Alshammary, Industrial Engineering Department, College of Engineering and Architecture, Alyamamah University, Riyadh-11512, Saudi Arabia
Ahmed S. Bujeir, Abdulaziz M. Junaid, Sharaf A. Alshareef and Ammar Y. Alqahtani, Department of Industrial Engineering, Faculty of Engineering, King Abdulaziz University, P.O. Box 80204, Jeddah 21589, Saudi Arabia
Jose Antonio Cornejo-Linares and Tomas Ferreyros-Sylvester, Facultad de Ingeniería. Universidad de Lima, Perú
Martin Fidel Collao-Diaz, Research Professor, Facultad de Ingeniería. Universidad de Lima, Perú
Muji Gunarto, Master of Management Program, Universitas Bina Darma, Palembang, Indonesia
Sri Yusriani, Student of Master of Management Program, Universitas Terbuka, Grindsted, Denmark
Nunung Nurbaeti, Student of Master of Management Program, Universitas Terbuka, Jakarta, Indonesia
ID 354 Centrifugal Pump Reliability Improvement in the Pulp and Paper Industry
Nontuthuko Shabane, Bheki B.S Makhanya and Jan-Harm Pretorius, Postgraduate School of Engineering Management, Faculty of Engineering and the Build Environment, University of Johannesburg, PO Box 524, Auckland Park 2006, South Africa
John Michael V. Dela Cruz, Bryant Anthony G. Islao, Guiller E. Laluan, Stephen Shadrach P. Marcos, Michael John B. Valerio, Maricar M. Navarro, Department of Industrial Engineering, College of Engineering and Architecture, Technological Institute of the Philippines – Quezon City Cubao, Quezon City, Philippines
Hossein Soltani, Department of Manufacturing Engineering Technology, Minnesota State University, Mankato, MN 56001, USA
Kuldeep Agarwal, Department of Manufacturing Engineering Technology, Minnesota State University, Mankato, MN 56001, USA
ID 363 A Value Chain Approach Turning Ga-Lekgothoane Village into a Home of Sweet Potato Yoghurt
Sebonkile C. Thaba, Department of Transport and Supply Chain Management, School of Management, University of Johannesburg, South Africa
Charles Mbohwa and Nelson Madonsela, Department of Quality and Operations Management, University of Johannesburg, South Africa
ID 368 Strengths (S), Weaknesses (W), Opportunities (O), and Threats (T) Analysis of Electric Vehicles Ali Ahmadian, Visiting Professor, Department of Chemical Engineering, University of Waterloo, Waterloo, Canada
Ali Elkamel, Professor, Department of Chemical Engineering, University of Waterloo, Waterloo, Canada Mohamed Faadil, Khalifa University, Abu Dhabi, UAE
ID 370 Supply Chain and Industry 4.0: A Review of Literature
Georgia Prado de Moura de Faria, Undergraduate Student, Federal Institute of Education. Science and Technology of Sao Paulo – IFSP Sorocaba Campus Sorocaba, Brazil
ID 373 Potential to Value-Add Waste Orange Peels to Produce Natural Anti-Microbial Extracts
N. Muranda, Department of Chemical Engineering, Manicaland State University, Zimbabwe,
M. M. Manyuchi, Department of Chemical Engineering, Manicaland State University, Zimbabwe, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
N. Sukdeo, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 374 Improving Medicine Supply and Availability Using Simulation. A Case Study of Uganda.
Hellen Nabayiga, Professor Robert Van Der Meer and Dr. Mouhamad Shaker Ali Agha, Department of Management Science, Strathclyde Business School, University of Strathclyde, Glasgow, G1 1XQ, United Kingdom
ID 377 Building RMA Process for an Electronic Manufacturing Company: A Case Study
Basel Sultan and Daryl Santos, Thomas J. Watson College of Engineering and Applied Science, Systems Science and Industrial Engineering Department, Watson Institute for Systems Excellence (WISE), The State University of New York at Binghamton, Binghamton, NY 13902, USA
Thomas Byrnes, Foxconn Industrial Internet, Mount Pleasant, WI 53177, USA
Rowdha Makki and Dr Balan Sundarakani, University of Wollongong in Dubai, United Arab Emirates
Osama AL-Qahtani, Abdulrahman Almotairi, Mohammed Alamodi and Dr. Alaa Momena, Prince Sattam bin Abdulaziz University College of Engineering, Industrial Engineering Department, Saudi Arabia
Jan Marielle I. Bidayan, Abegail G. Cambay, Arjen Guila C. Cruz, Neil Leandro G. Fajardo, Erika Mae P. Ople and Maricar M. Navarro, Industrial Engineering Program, College of Engineering and Architecture, Technological Institute of the Philippines, Quezon City, Philippines
Rafeek Bassam Mushtaha, Abdulaziz Yasser Aburahma, Moath Abdullah Alluhidan, Madiha Rafaqat, Osamah Abdulhameed and Naveed Ahmed, Department of Industrial Engineering, College of Engineering and Architecture, Al Yamamah University, Riyadh 11512, Saudi Arabia
Shine Pintor Siolemba Patiro, Lecturer of Master of Management Program, Universitas Terbuka, Jakarta, Indonesia
Sri Yusriani, Student of Master of Management Program, Universitas Terbuka, Grindsted Billund, Denmark
Kabul Wahyu Utomo, Lecturer of Master Management Program, Universitas Terbuka, Jakarta, Indonesia
ID 405 Enhancing Railways Signaling System Efficiency
Elana Bahmaid, Layan AlEssa, Maha AlThenyan, Nourah AlHudaithi and Shouq AlHawiti, Department of Industrial Engineering and Systems, College of Engineering, Princess Nourah bint Abdulrahman University, P.O. Box 84428, Riyadh 11671, Saudi Arabia
Kaouther Ghacham, Laboratory of Metrology and Energy Systems (LR18ES21), University of Monastir, Monastir, 5000, Tunisia
Basel Sultan, Hamzeh Alshraida and Daryl Santos, Systems Science and Industrial Engineering Department, Watson Institute for Systems Excellence (WISE), The State University of New York at Binghamton, Binghamton, NY 13902, USA
Fernando Franco, Foxconn Industrial Internet, Mount Pleasant, WI 53177, USA
Sambil Charles Mukwakungu, Ncedo Khoza and Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, South Africa
Luis Quispe Cullampe, Facultad de Ingeniería, Universidad de Lima, Lima, Peru
Brandon Yang Lima, Facultad de Ingeniería, Universidad de Lima, Lima, Peru
Rafael Chavez-Ugaz, Profesor de Investigación, Universidad de Lima, Lima, Peru
Mart Lorenz R. Agravante, John Rei C. Garchitorena, Johanh Gabrielle C. Julian, Carl Joseph C. Quintana, Miguel G. Tabirao, Maricar Navarro, Juan Miguel Dinglasan, Industrial Engineering Program, College of Engineering and Architecture, Technological Institute of the Philippines, Quezon City, Philippines
ID 419 Optimizing On-Site Electric Vehicle Charging: Routing for Efficient Last-Mile Operations
Shazeb Liyakath and Prof. Arshinder Kaur, Department of Management Studies, Indian Institute of Technology, Madras, Chennai 600 036, INDIA
Viswanath Kumar Ganesan and Haripriya K, Tata Consultancy Services Ltd., IIT Madras Research Park, Chennai 600 013, INDIA
ID 421 Blockchain Technology for Sustainable Industry
Fares Mohamed, Juma Alsaadi, Abdulla Alameri and Zoubida Benmamoun, Liwa College, Faculty of engineering, Abudhabi, United Arab Emirates
ID 423 SWOT Analysis for Assessing Autonomous Shipping’s Viability using Literature: A Review Study
Mohamed Amjath, Division of Engineering Management and Decision Sciences, College of Science and Engineering, Hamad Bin Khalifa University, Doha, Qatar
Laoucine Kerbache, Professor, Division of Engineering Management and Decision Sciences, College of Science and Engineering, Hamad Bin Khalifa University, Doha, Qatar; and HEC Paris, France
ID 437 Accelerating Sodium-Ion Electrode Material Development Through Artificial Intelligence
Sara Arif Alzaabi, MSc student, Department of Civil and Environmental Engineering, Khalifa University, Abu Dhabi, UAE
Dr. Ali Elkamel and Dr. Ali Alhammadi, Department of Chemical Engineering, Khalifa University, Abu Dhabi, UAE
Dr. Georgios Karanikolos, Department of Chemical Engineering, University of Patras, Greece
Naushad Alam and Puja Sareen, Amity Business School, Amity University Uttar Pradesh, India
Aftab Alam, CMS Jamia Millia Islamia, India
ID 448 A Practical Algorithm for Midterm Exam Scheduling in Higher Education Institutions
Hakan Gultekin and Sayyad Zahid Qamar, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman
Hassan Al-Lawati, Department of Electrical and Computer Engineering, Sultan Qaboos University, Muscat, Oman
ID 450 Dual-Channel Closed-Loop Supply Chain: Competition and Channel Coordination
Pinakhi Suvadarshini, Assistant Professor, Indian Institute of Management Amritsar India
ID 451 Charging Planning Model for Electric Vehicles Based on Range Prediction
Hilal Yılmaz, Assist. Department of Industrial Engineering, Bursa Technical University, Bursa, Turkey
ID 452 Determining an Optimal Charging Plan for Electric Vehicles Considering Time-of-Use Pricing
Hilal Yılmaz, Assist. Prof. Dr., Department of Industrial Engineering, Bursa Technical University, Bursa, Turkey
Betul Yagmahan, Prof. Dr., Department of Industrial Engineering, Bursa Uludag University, Bursa, Turkey
Jamal Al Memari, Khaoula Khlie and Jasim Alhadhrami, Industrial Management Department, Faculty of Business, Liwa College, Abu Dhabi, United Arab Emirates
ID 457 Crowdfunding: Exploring its Role as an Alternative Financial Avenue in the Indian Context
Ritika, Research Scholar, Department of Management Studies, Indian Institute of Technology Roorkee Roorkee, Uttarakhand-247667, India
Dr. Ashu Khanna, Associate Professor, Department of Management Studies, Indian Institute of Technology Roorkee, Roorkee, Uttarakhand-247667, India
ID 463 Surface Modification through Friction Stir Processing (FSP)
Pooja Dwivedi and Sachin Maheshwari, Department of Mechanical Engineering, Netaji Subhas University of Technology, New Delhi-110078, India
Arshad Noor Siddiquee, Department of Mechanical Engineering, Jamia Millia Islamia, New Delhi-110025, India
Qutubuddin S.M., Department of Industrial & Production Engineering, P.D.A. College of Engineering, Kalaburagi, Karnataka, India
Maha Asiri Atheer AlGhasib, Huda AlMoawadh, Nada Alsaif and Dina Almutawa Raghad Alghtani Mohammed Al Awadh, Industrial Engineering Department, King Khalid State University, Saudi Arabia
Jiri Tupa, Associate Professor, Department of Technologies and Materials, Faculty of Electrical Engineering, University of West Bohemia, Pilsen
ID 466 Automation in Construction Cost Budgeting using Generative Artificial Intelligence
Pouyan Parsafard, Ogerta Elezaj, Damilola Ekundayo and Edlira Vakaj, Birmingham City University, United Kingdom
Milan Parmar, 21 Borrowdale Close, Ilford, England, IG4 5LS, United Kingdom
Mudasir Ahmad Wani, Prince Sultan University, Saudi Arabia
ID 469 Architectural Design for A Summer House
Remas Mohammed AL-Hlis, Student, Civil Engineering department, Taif university
Dana Hamed Alsofyani, Student, Civil Engineering department, Taif university
Nabeel Sultan, Department of Chemical Engineering, Khalifa University, Abu Dhabi, UAE
Ali Almansoori and Ali Elkamel, Department of Chemical Engineering, Khalifa University, Abu Dhabi, UAE and Department of Systems Design Engineering and Department of Chemical Engineering, University of Waterloo, Waterloo, ON, Canada
Sheeraz Ahmad, Department of Chemical Engineering, Khalifa University, Abu Dhabi, UAE
Ali Almansoori and Ali Elkamel, Department of Chemical Engineering, Khalifa University, Abu Dhabi, UAE and Department of Systems Design Engineering and Department of Chemical Engineering, University of Waterloo, Waterloo, ON, Canada
Rumi Tobita, Center for Liberal Arts and Sciences of Engineering Department, Ashikaga University, Tochigi, Japan
ID 487 Empowering Parcel Delivery Logistics: The Role of Customer Journey Mapping in Driving Innovation and Customer-Centric Solutions
Mehrdad Fakher, Cofounder, COB and Logistic Cluster Chief Executive at Fakher Holding CEO at Tipax, PhD in strategy & Entrepreneurship from London Business School, Tehran, IRAN
ID 488 Circular Economy in Manufacturing: Maximizing Resource Efficiency and Minimizing Waste
Onu Peter and Charles Mbohwa, Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, P. O. Box 524, Johannesburg, South Africa
Onu Peter and Charles Mbohwa, Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, P. O. Box 524, Johannesburg, South Africa
ID 490 Drive-Thru Fixture Design
Fahad AlHadyan, Faris AlMosa, Khalid AlKhateeb, Musaad AlHobayb, Tareq AlMohawis and Dr. Wasim AlShammary, Industrial Engineering Department, College of Engineering and Architecture, Al Yamamah University, Riyadh, Saudi Arabia
ID 492 On Waiting Time Prediction in Hospital Emergency Departments
Dr. Chengye Zou, City University of Hong Kong, China
Yiran Zhang, Prof. Huiyin Ouyang, HKU Business School, University of Hong Kong, China
Prof. Zhankun Sun, Department of Management Sciences, City University of Hong Kong, China
Christ Ivan Hasudungan Simanjuntak, Muhammad Hanif Fathan Putra, Nabil Ahmad Zaky and Rizqullah Dewandono, Undergraduate Students, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java 16424, Indonesia
Rahmat Nurcahyo, Professor, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java, Indonesia
Ardhy Lazuardy, Doctoral Student, Dept. of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java, Indonesia
Hasna Hamida Nurkamila, Jeanne Risananda Sharone, Tri Inayah Bagus Setyawati and Yasmin Hanifah, Undergraduate Students, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia
Rahmat Nurcahyo, Professor, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java, Indonesia
Arief Nurdini, Doctoral Student, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java, Indonesia
Ahmad Nauval Ariq Ms, Baidilla Anamta Bimasakti, Felix Ferdinand Laureng and Setya Ady Wicaksono, Undergraduate Students, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java 16424, Indonesia
Rahmat Nurcahyo, Professor, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java, Indonesia
Arief Nurdini, Doctoral Student, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java, Indonesia
Juni Fransisca Onggani Winata, Lulu Afifa, Meutiara Nisyafietdhia Setiawan and Sarah Dwi Aliya, Undergraduate Students, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java 16424, Indonesia
Rahmat Nurcahyo, Professor, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java, Indonesia
Ardhy Lazuardy, Doctoral Student, Dept. of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java, Indonesia
ID 497 Digital Human Modeling (DHM) to Overcome Ergonomic Challenges at Warehouses in Kuwait
Areej Almarri, Hessah Almutairi, Modhawi Albaqmi, Khadija Alyousef, Ruqayah Alqadheeb, Karim Abbady and Suat Kasap, College of Engineering and Technology, American University of the Middle East, Kuwait
ID 498 Improving Warehouse Capacity Utilization using Discrete Event Simulation Modelling
Ahmed Zainul Abideen and Nasiru Zubairu, Lecturer, Faculty of Transport and Logistics, Al Ghubra North, Muscat, Sultanate of Oman
ID 499 Data-Driven Analysis of Ticket Options in the Airline Industry
Zainab Alshammari, Fatemah Maarafi, Khuloud AlMutairi, Danah AlYousef, Farah Bohamad and Ethem Canakoglu, College of Engineering and Technology, American University of the Middle East, Kuwait
Adisti Shafira, Davinna Maritza Putri, Diniarvina Lulu Aisha and Safina Ghassani Zattiiwani, Undergraduate Students, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java 16424, Indonesia
Rahmat Nurcahyo, Professor, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java, Indonesia
Muhammad Habiburrahman, Doctoral Student, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, West Java 16424, Indonesia
ID 502 Enhancing Spare Parts Inventory Management through Machine Learning Based Classification
Shefaa Baik, Assistant Professor, Department of Industrial Engineering, Faculty of Engineering, King Abdulaziz University, Jeddah, Saudi Arabia
Lama Alasmari, Mashael Alamoudi, Dana Akmal and Lujain Alobaidi, Senior Industrial Engineering Students, Department of Industrial Engineering Faculty of Engineering, King Abdulaziz University, Jeddah 21589, Saudi Arabia
Waleed Mirdad, Assistant Professor, Dept. of Industrial Engineering, Faculty of Engineering, King Abdulaziz University, Jeddah, Saudi Arabia
ID 504 The State of Emerging Agro-Processors in South Africa: A Case of Limpopo Province
Sebonkile Cynthia Thaba, Department of Transport and Supply Chain Management, School of Management, College of Business and Economics University of Johannesburg, Auckland Park, Johannesburg, South Africa
Lawrance Seseni, Department of Business Management, School of Management, College of Business and Economics, University of Johannesburg, Auckland Park, Johannesburg, South Africa
Charles Mbohwa and Nelson Madonsela, Department of Quality and Operations Management, School of Engineering Management, College of Business and Economics, University of Johannesburg, Auckland Park, Johannesburg, South Africa
ID 507 Optimal Design of a Vortex Wind Turbine Using Taguchi Method
Sarah Alshahrania, Shahad Almasuda, Sabah Alshahrania, Fatima Aljameela, Reham Alashwla and Mohammed Alqahtania, Department of Industrial Engineering, King Khalid University, King Fahad St., Abha, 62529, Saudi Arabia
ID 509 Enhancing Profit Maximization Strategies: A Case Study of the Songket Industry in Indonesia
Yuana Delvika, Mechanical and Industrial Engineering Department, Indian Institute of Technology Roorkee, Uttarakhand, India Industrial Engineering Department, Universitas Medan Area, Indonesia
Akshay Dvivedi, Professor, Mechanical and Industrial Engineering Department, Indian Institute of Technology Roorkee, Uttarakhand, India
ID 510 Application of Industrial Engineering Tools for Improving Performance of Oil and Gas Factory
Mahmoud Z. Mistarihi1,2, *, Nasser Albreiki1, Omar Albreiki1, Ahmed AL Aleeli1, Abdulla AL Menhali1, Yousef Alzaabi1 and Mohammed Al suweedi1, 1Department of Mechanical and Industrial Engineering, Faculty of Engineering, Liwa College, Abu Dhabi P.O. Box 41009, United Arab Emirates, 2Department of Industrial Engineering, Hijjawi Faculty for Engineering Technology, Yarmouk University, Irbid 21163, Jordan
ID 515 Does Leadership have an Impact on Employee Productivity and Sustainability?
Ipfi Nemudzivhadi and Emmanuel Edoun, Department of Quality and Operations Management, University of Johannesburg, South Africa
ID 527 Model-Based Approaches to Customer Churn Perspective: Bibliometric Analysis
Dr. Abdelghani Bouras and Mr. Abdulrahman Alosaimi, Professor of Industrial Engineering, Master of Engineering and Systems Management Candidate, Alfaisal University, Riyadh, Riyadh, KSA
ID 528 A Digitalization Framework for Real-time Large-scale Production Scheduling
Neha Kadu, Shankar Prawesh and Avijit Khanra, Department of Management Sciences, Indian Institute of Technology, Kanpur, India
Naoyuki Fujiwara, Yuichi Koga and Yosuke Watanabe, Digital Innovation Headquarters, 0360074 Mitsubishi Heavy Industries, Ltd., India
Mazen Kiki, Department of Mechanical Engineering, The University of Akron, 244 Sumner Street, Akron, OH 44325, United States
Ismail Hamieh, Department of Electrical and Computer Engineering the University of Windsor, 401 Sunset Ave, Windsor, ON N9B 3P4, Canada
Shengyong Wang, Associate Professor, Mechanical Engineering, 244 Sumner Street, Akron, OH 44325, United States
ID 530 Investigating the Effect of Varying Surrounding Conditions on The Degradation of Starch/Nylon-1010 Blend
Aryaveer Pradeepkumar Nair, Department of Chemical Engineering, Maharaja Sayajirao University, Vadodara, India
Alberto Muñoz Pachas, Andrea Briceño Carrion and Alberto Flores-Perez, Facultad de Ingeniería, Universidad de Lima, Lima, Perú
Guilherme Bolzan Cieto, MSc Student, Department of Industrial Engineering, São Carlos School of Engineering, University of São Paulo (USP) São Carlos, São Paulo, Brazil
Roberto Antonio Martins, Professor, Department of Industrial Engineering, Federal University of São Carlos (UFSCar), São Carlos, SP, Brazil
Juan Du, Smart Manufacturing Thrust, Systems Hub, The Hong Kong University of Science and Technology (Guangzhou), Guangzhou, Guangdong, China, Department of Mechanical and Aerospace Engineering, The Hong Kong University of Science and Technology, Hong Kong SAR, China
ID 534 Circular Procurement Roadmap Development for Construction Industry: Developing Nation Context
Vidyasagar Gembalia; Aalok Kumarb; PRS Sarmac,
a PhD Student, Production and Operations Management area, Indian Institute of Management Visakhapatnam 530003 India
b Assistant Professor, Production and Operations Management area, Indian Institute of Management Visakhapatnam 530003 India
c Associate Professor, Production and Operations Management area, Indian Institute of Management Visakhapatnam 530003 India
Mohammed Hamoumi, Mariam Benhadou and Abdellah Haddout, Industrial Management and Plastics Forming Technology Team Mechanics, Engineering and Innovation Laboratory, LM2I, National High School of Electricity and Mechanics – ENSEM- Hassan II University, Casablanca, Morocco
ID 540 Module-based Convolutional Neural Network Structure Optimization
Ivan Kristianto Singgih, Assistant Professor, Department of Industrial Engineering, University of Surabaya, ,Indonesia, The Indonesian Researcher Association in South Korea (APIK)Seoul, 07342, South Korea, Kolaborasi Riset dan Inovasi Industri Kecerdasan Artifisial (KORIKA), Jakarta, Indonesia
Evan Sutrisno and Michael Abednego, Undergraduate Student, Department of Industrial Engineering, University of Surabaya
Dina Natalia Prayogo, Lecturer, Department of Industrial Engineering, University of Surabaya, Indonesia
ID 541 Into the Future with Cloud: A Comparison with On-premises Data Warehouse
Iman Noor and Saad Bin Tariq, Institute of Geographic Information Systems, National University of Sciences and Technology, Islamabad, Pakistan
Aisha Shabbir, NUST Institute of Civil Engineering, School of Civil and Environmental Engineering, National University of Sciences and Technology, Islamabad, 44000, Pakistan
Mary Aksa, Department of Software Engineering, Foundation University, Islamabad,44000, Pakistan
ID 544 Cost-Effective Air-to-Ground System and Network Design for 5G Inflight Connectivity in the Kingdom of Saudi Arabia
Danah Al Ateeq, Rawan Alomari, Aram Albulayhid, Manar Alkahtani, Eman Alhuthayl and Yazan M. Allawi, Department of Electrical Engineering, College of Engineering, Princess Nourah bint Abdulrahman University, Riyadh 84428, Saudi Arabia
Hosam Elgendy, Department of Computer Vision, Mohamed bin Zayed University of Artificial Intelligence, Abu Dhabi, UAE
Patrick Mukala, Faculty of Engineering and Computer Science, University of Wollongong in Dubai, Dubai, UAE
Rakan Alkahlani, Khaled Almaliki, Mohammed Aljohani, Ahmad Abuduhair
Supervised By: Dr. Hassan Hijry University of Tabuk, College of Engineering, Department of Industrial Engineering, University of Tabuk, Saudi Arabia
ID 547 Text Mining and Data Mining Applications in Industrial Engineering: Review and Extension
Mitra Bagherini, School of Industrial Engineering, Iran University of Science & Technology, Tehran, Iran
Ali Reza Hoseini, School of Industrial Engineering, Iran University of Science & Technology, Tehran, Iran
Mohammad Rabiei, Assistant Professor of Iranian Research Institute for Information Science and Technology (IRANDOC)
Morteza Baghepour, Department of industrial engineering, Antalya Bilim University, Antalya, Turkey
Semail Ulgen, Department of industrial engineering, Antalya Bilim University, Antalya, Turkey
ID 548 Entrepreneurial Competencies for Business Success
Martha Lucia Pachon Palacios, Professor, Associate professor of the Faculty of Administration, Finance and Economic Sciences of the EAN University, Bogotá – Colombia
J. Divitt Ed. Velosa Garcia, Associate Professor. Production Engineering Program, Faculty of Engineering, EAN University, Bogotá – Colombia
Victor Martin Maldonado Benitez and Gabriela Guadalupe Escobedo Guerrero, ESCA Santo Tomás, Instituto Politécnico Nacional, México City, México
Brenda Esmeralda Moreno Garduño, ESCA Santo Tomás, Instituto Politécnico Nacional, México City, México
1)Muhammad Tiddad Wahyu P., 2) Najib Salim, 3) Diah Nurul Istiqomah, 4) Cucu Tiara, 5) Salsadila Meita Vanessa, 6) Yusnita Rizki Firdaus Industrial Engineering, UIN Sunan Kalijaga Yogyakarta
ID 555 Hotel Laundry Optimization
Seçil Gülbudak Dil, Aybüke Şahin and Semail Ülgen, Antalya Bilim University, Turkey
ID 556 HayAnksi!: A cCBT Application for Adolescents with Anxiety
Hazal Bulut, Data engineer-bachelor student, Oslo Metropolitan University, Faculty of Technology, Art and Design, Trimveien 6, Oslo, Norway
Tuğba Karalar Enginel, Damla Özdemir and Haktan Şahin, Antalya Bilim University, Electrical and Electronics and Computer Engineering, (Senior Student), Computer Engineering (Senior Student), Computer Engineering, (Senior Student), Ciplakli Mahallesi Farabi Caddesi, No: 23 Dosemealti, Antalya, 07190, Turkey
Veli Kağan Muratoğlu, MSc Student, Clinical Psychology, Institute of Post-Graduate Education, Antalya, 07190, Turkey
Muhammed Ali Özden, Computer Engineering Bachelor’s Degree, Süleyman Demirel University, Çünür, Muratpaşa, Antalya, 07040, Turkey
Alev Topçu, Psychologist, Balıkesir Provincial Health Directorate, Balıkesir, 10700, Turkey
Semail Ülgen, Department of Industrial Engineering Antalya Bilim University, Ciplakli Mahallesi Farabi Caddesi, Antalya, Turkey
ID 557 Hotel Supplier Selection for Fresh Vegetables and Fruit
Seçil Gülbudak Dil, Fatoumata Soumare and Semail Ülgen, Antalya Bilim University, Turkey
ID 558 Career Incentives of Nonprofit Sector: Case of Religious Tourism Sector in Saudi Arabia
Hatim Bukhari, Assistant Professor, University of Jeddah, College of Engineering, Department of Industrial and Systems Engineering, Jeddah, Saudi Arabia
ID 559 Determining Factors Affecting Perceived Safe-Driving Behavior of Filipino Private Car Drivers
John David Bicera, Nestor Paul Casipit, Abigaile De Jesus and Yoshiki B. Kurata, Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, España Blvd., 1015, Manila, Philippines
ID 560 Human Error: A 10-Year Review of Trends and Techniques in Maritime and Process Industries
Salman Nazir, Professor, Department of Maritime operations, University of South-Eastern Norway, Vestfold, Norway
Sepideh Aghajani, PhD, Department of Industrial Engineering, Faculty of Engineering, Alzahra University, Tehran, Iran
Mehdi Seifbarghy, Associate Professor, Department of Industrial Engineering, Faculty of Engineering, Alzahra University, Tehran, Iran
Dewi Sartika, Faculty of Social Humaniora, Universitas Bina Darma, Palembang, Indonesia
Muji Gunarto, Faculty of Social Humaniora, Universitas Bina Darma, Palembang, Indonesia
Puja Maduri, Student of Accounting Program, Universitas Bina Darma, Palembang, Indonesia
Wuri Handayani, Student of Accounting Program, Universitas Bina Darma, Palembang, Indonesia
Ratri Septianasari, Student of Accounting Program, Universitas Bina Darma, Palembang, Indonesia
ID 563 Analysis of Financial Distress on Tax Avoidance Mediated by Transfer Pricing
Dewi Sartika, Master of Accounting Program, Universitas Bina Darma, Palembang, Indonesia
Muji Gunarto, Master of Management Program, Universitas Bina Darma, Palembang, Indonesia
Feliantika Wijayanti, Student of Accounting Program, Universitas Bina Darma, Palembang, Indonesia
Sukurniati, Student of Accounting Program, Universitas Bina Darma, Palembang, Indonesia
Yolan Saparingga, Student of Accounting Program, Universitas Bina Darma, Palembang, Indonesia
ID 564 The Synergy of Society 5.0 and Industry 5.0 Transforming Work, Society, and Collaboration
Semail Ülgen, Head of Department of Industrial Engineering, Professor Industrial Engineering, Antalya Bilim Univeristy, Antalya, Turkey
Mohammad Muneeb, Senior Student Department of Industrial Engineering, Antalya Bilim University, Antalya, Turkey
ID 565 The Readiness of PT XYZ Supporting the Indonesian Army Logistics Transportation
Chadziqatun Najilatil Mazda and Yandra Rahadian Perdana, Department of Industrial Engineering, State Islamic University (UIN) Sunan Kalijaga, Yogyakarta, Indonesia
I Nengah Putra Apriyanto, Department of Defense Industry, The Republic of Indonesia Defense University, Jakarta, Indonesia
ID 567 Application of Lean in Maintenance Processes of Air Compressors and Diesel Welding Machines
Yasser Alahmad, Abdulla Aljaberi, Khwla Alkatheeri and Maithah Alyaarbi, Students, Department of Management Science and Engineering, College of Engineering, Khalifa University, Abu Dhabi, UAE
Dr. Saed Amer, Assistant Professor, Dept. of Management Science and Engineering, College of Engineering, Khalifa University, Abu Dhabi, UAE
ID 582 Occupational Safety Model in Maintenance Operations: A Case Study of a Service Company
Marolim Chavez Vasquez, Mateo Bresani Doig and Rafael Villanueva Flores, Universidad De Lima, Peru
Albertus Retnanto, Ph.D., Professor and Chair, Petroleum Engineering Program, Texas A&M University at Qatar, Doha, Qatar
Hamid R. Parsaei, Ph.D., P.E., Professor, Industrial and Systems Engineering, Texas A&M University, College Station, TX, USA
Ameen Siddiqui, Graduate Student, Industrial and Systems Engineering, Texas A&M University, College Station, TX, USA
Nour Tarek and Islam El-Nakib, College of International Transport and Logistics, Arab Academy for Science, Technology and Maritime Transport, Alamein, Egypt
Rasha Abdelaziz, Business Information Systems Department, College of Management and Technology, Arab Academy for Science, Technology and Maritime Transport, Alexandria, Egypt
ID 586 Robust Security System with Toll Free Call Services. Case Study: Adama City
Shenko Chura Aredo, Adama City Administration, Ethiopia
ID 587 Downtime Analysis of a Mayo Bottling Line During the Ramp-Up Period: A Case Study
Dima Jawad, Associate Professor, Department of Mechanical and Manufacturing Engineering, Ontario Tech University, Oshawa, ON, Canada
Peter El Khoury, Department of Mechanical and Manufacturing Engineering, Ontario Tech University, Oshawa, ON, Canada
ID 588 Industry 4.0 Readiness: From Concept to Implementation
Arvin Shadravan and Hamid R. Parsaei, Wm Michael Barnes ’64 Department of Industrial & Systems Engineering, Texas A&M University, College Station, Texas, USA
ID 589 Marketing Strategy Analysis of PT XYZ Product Using Important Performance Analysis Method
Yusuf Saputro, Graduate Student, Industrial Engineering, State Islamic University of Sunan Kalijaga, Yogyakarta, Indonesia
Yandra Rahadian Perdana, Lecturer, Industrial Engineering, State Islamic University of Sunan Kalijaga, Yogyakarta, Indonesia
ID 590 Bibliometric Analysis and Visualisation of Waste Management LCAs in Southern Africa
Tatenda Talent Chingono, University of Johannesburg, South Africa
ID 591 Vos Viewer Analysis of Waste to Energy Management Practices in South Africa in the 4IR Era
Tatenda Talent Chingono, Researcher, Department of Quality and Operations Management, University of Johannesburg, South Africa
Charles Mbohwa, Visiting Professor, Department of Quality and Operations Management, University of Johannesburg, South Africa
ID 593 Assessment of Perceptions Versus Reality: A Comparative Study of Air Quality Levels in Kuwait
Zainab Alsabt, and Takeaki Toma, Faculty of Industrial Engineering, College of Engineering and Technology, American University of the Middle East, Egaila, Kuwait
Gloria Mamorena Mokoena, Sambil Charles Mukwakungu and Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, South Africa
ID 595 Data Driven Based Energy Management Model for EVS Wireless Charging System
Mohammed Alqahtani, Assistant Professor in the department of Industrial Engineering, King Khalid University, (KKU), Saudi Arabia and M.Sc. degree in the Department of Mechanical &Industrial Engineering at University of Arizona
Ibtisam Abdullah, Sahar Mughram, Shahad Alaziz, Sara Ahmad and Shahad Alshahrani, Senior Industrial Engineering at King Khalid University, Abha, Saudi Arabia
Noha A. Mostafa, Associate Professor, Mechanical Engineering Department, Faculty of Engineering, The British University in Egypt, Shorouk, Cairo, Egypt and Industrial Engineering Department, Faculty of Engineering, Zagazig University, Zagazig, Sharkia, Egypt
Karim Ahmed, Associate Professor, Mechanical Engineering Department, Faculty of Engineering, The British University in Egypt, Shorouk, Cairo, Egypt
ID 597 Challenges of Healthcare Operations Management: A Literature Review
Inas Al Khatib, PhD Student in Engineering Management, Department of Industrial Engineering, American University of Sharjah, Sharjah, UAE
Abdulrahim Shamayleh, Head of Department of Industrial Engineering, Department of Industrial Engineering, American University of Sharjah Sharjah, UAE
Malick Ndiaye, Professor at Department of Industrial Engineering, Department of Industrial Engineering, American University of Sharjah, Sharjah, UAE
Firas Al-Zadjali, Saud Al-Bulushi, Ahmed Al-Abdali, Nasr Al-Hinai and Ahmed Shaban, Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, Al-Khoud, Muscat 123, Oman
ID 601 Navigating the Road to Value: Knowledge as a Strategic Driver in Ride-Hailing Service
Amna Javed, Senior Lecturer, Graduate School of Knowledge Science, Japan Advanced Institute of Science and Technology, Ishikawa, Japan
Ahson Javaid, Founder & CEO, ROCKETtech, Oberwangen, Switzerland
Youji Kohda, Professor, Graduate School of Knowledge Science, Japan Advanced Institute of Science and Technology, Ishikawa, Japan
ID 603 Modeling Critical Success Factors for Green Supply Chain Management in Saudi Arabia
Mohamed Rafik N. Qureshi, Professor, Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, Saudi Arabia
Taif Alqhtani, Norah Al-Daaboub, Yosra Alahmari, Ruba Abdullah and Raghad Mohammed, Department of Industrial Engineering, College of Engineering, King Khalid University, Abha, Saudi Arabia
Smeetasree Pati, Research Scholar, Department of Management Studies, Indian Institute of Technology, Roorkee, India
Rajat Agrawal, Professor, Department of Management Studies, Indian Institute of Technology, Roorkee, India
ID 606 Enhancing Productivity through the Utilization of a Work-Measuring Methodology
Mohammed A Awadh, Department of Industrial & Systems Engineering, College of Engineering
King Khalid University, Abha, Aseer, Saudi Arabia
ID 607 Digitalized Curriculums in Architecture: Impact on Student Satisfaction and Engagement
Maram Abuznada, PhD in Business Administration, College of Business., Effat University, Saudi Arabia, Jeddah
Abdulaziz Basnawi, PhD in Business Administration, College of Business., Effat University, Saudi Arabia, Jeddah
Rahatullah Muhammed Khan, Associate Professor and Director Business Innovation and Entrepreneurship Research Center, College of Business, Effat University, Saudi Arabia, Jeddah
ID 608 Artificial Intelligence Adoption in Education A Study on Attitudes, Readiness, and Intention
Iman H. Musawa, Rasha A. Almalik, Rahatullah M. Khan, Effat University, College of Business, Jeddah, KSA
Muhammad Arif Prasetyo, Chadziqatun Najilatil Mazda, Taufiq Aji and Khusna Dwijayanti, Department of Industrial Engineering, Faculty of Science and Technology, Universitas Islam Negeri Sunan Kalijaga, Indonesia
ID 610 Organizational Culture Adaptability by Leaders and its Influence on Firm Performance
Monira Albogami; Ola Sharawi & Rahatullah Muhammed Khan, Effat University, Saudi Arabia
ID 613 The Reality and Prospects of Caring for Patients in Medical and Surgical Emergency Department
S.Benaicha, Assistant Professor, Department of Medicine, University of Batna2, Algeria
W. Benhassine, Professor, Department of Medicine, University of Batna2, Algeria
ID 614 A Descriptive Study of Psychological Aggression Among Nursing Staff Members at Work
S.Benaicha, Assistant Professor, Department of Medicine, University of Batna2, Algeria
W. Benhassine, Professor, Department of Medicine, University of Batna2, Algeria
Mokete Zondo, Sambil Charles Mukwakungu, Nita Sukdeo and Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, South Africa
ID 617 Zeolite as an Alternative Exhaust Filter
Rachel D. Avila, Noel Franz F. Caluba, Jacob T. Evangelista, Raymel Jorenz F. Hamor, Iraz Miguel F. Liwag, Maricar M. Navarro and Evelyn M. Eviota, Department of Industrial Engineering, College of Engineering and Architecture, Technological Institute of the Philippines – Quezon City, Cubao, Quezon City, Philippines
Dr Pouria Liravi, Senior Lecturer Operations and Supply chain, University of Derby, United Kingdom
Mohammad Ali Alhosani, Doctorate student, Innovation and Technology Adoption, University of Derby, United Kingdom
Shaikha Abdulla, Hajar Alshehhi, Abdulrahman Alhashmi, Maryam Alhammadi and Afifa Alremeithi, Department of Management Science and Engineering Faculty of Engineering, Khalifa University of Science and Technology, Abu Dhabi, UAE
Saed Talib, Senior Lecturer, Department of Management Science and Engineering, Khalifa University of Science and Technology, Abu Dhabi, UAE
Qabas Al-Jumaili, Mariam Elghobashi and Fatma Alshamsi, Department of Industrial Engineering & Engineering Management, University of Sharjah, Sharjah, UAE, Ergonomics & Work & Process Improvement, United Arab Emirates
ID 623 Beyond Boundaries- Circular Economy in Plastics
Hareem Arshad, Nord University, Norway
Carigma, Daphne Francine M., Cruzado, Elizabeth S., Hagos, Michael Josh B., Perater, Kenneth S., Ramos, Denise M., Navarro, Maricar, Galinganm and Romalyn, Department of Industrial Engineering, College of Engineering and Architecture, Technological Institute of the Philippines – Quezon City, Cubao, Quezon City, Philippines
ID 626 The Effect of Physical Factors Towards the Worker Performance in Automotive Machining Shop
Nawi Zharif Iman bin Kamarulzaman and Jafri Mohd Rohani, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Johor, Malaysia
Erialdi Syahrial, Faculty of Management, Universiti Teknologi Malaysia, Johor, Malaysia
Lawrance Seseni, Department of Business Management, College of Business and Economics, University of Johannesburg, Auckland Park, Johannesburg, South Africa
Charles Mbohwa and Nelson Sizwe Madonsela, Department of Quality and Operations Management, Postgraduate School of Engineering Management, University of Johannesburg, Auckland Park, Johannesburg, South Africa
ID 629 SafeCAll; Implementing Deepfake Audio Detection in an Open-Source Communication App
Akshita Sushil Bhatia, Aleena Rashid, Joseph Ivan John, Mazin Sherif and Shriram Sekar Gounder, Final Year Students of B.Sc. in Computer Science, Members of Team Breakthrough, Capstone Project, University of Wollongong in Dubai, UOWD Building, Dubai Knowledge Park, P.O. Box 20183, Dubai, United Arab Emirates
Dr. Patrick Mukala, Assistant Professor, Department of Faculty of Engineering, and Information Sciences, University of Wollongong in Dubai UOWD Building, Dubai Knowledge Park, P.O. Box 20183, Dubai, United Arab Emirates
ID 632 Virtufit: An AI Powered Virtual Fitness Supplication
Dani Ternanni, Fatima Aya Tchantchane and Ali Mela Ali, Bachelor of Computer Science Big Data, University of Wollongong in Dubai, UAE
Noor Ahmed, Bachelor of Computer Science Cyber Security, University of Wollongong in Dubai, UAE
Abdullah Raffiei, Bachelor of Computer Science, University of Wollongong in Dubai, UAE
Patrick Mukala, Faculty of Engineering and Computer Science, University of Wollongong in Dubai, Dubai, UAE
ID 650 How to Make Future Engineers Critical Thinkers?
Sayyad Zahid Qamar, Mechanical and Industrial Engineering Department, Sultan Qaboos University, Muscat, Oman
Ahmed Zainul Abideen, Lecturer, Faculty of Transport and Logistics, Muscat, Sultanate of Oman
P A P Y Gajaba and Piumi Dissanayake, Department of Facilities Management, University of Moratuwa, Sri Lanka
Wilson Takavadii Nyamanhindi, Head of Department: School of Office Management, Harare Polytechnic, Zimbabwe
Erina Kaunda, Personal Assistant to the Principal, Harare Polytechnic, Zimbabwe
Moreblessings Chenesai Chiriga, Executive Secretary, Harare Polytechnic, Zimbabwe
ID 656 The Subjective Idea of the Physical Appearance of a Humanoid Robot
Steven Brownlee, Department of Electrical and Computer Engineering, Lawrence Technological University, Southfield, MI 48075, USA
Dr. George Pappas, Assistant Professor and Director MSAI, Department of Electrical and Computer Engineering, Lawrence Technological University, Southfield, MI 48075, USA
ID 660 Pillars of Quality and Excellence: An Introduction to Basic Concepts and Lean Six Sigma Tools
Souraj Salah, HBMS University, United Arab Emirates