{"id":468,"date":"2018-12-06T16:44:21","date_gmt":"2018-12-06T16:44:21","guid":{"rendered":"http:\/\/ieomsociety.org\/ieom2019\/?page_id=468"},"modified":"2022-12-20T21:24:07","modified_gmt":"2022-12-20T21:24:07","slug":"proceedings","status":"publish","type":"page","link":"http:\/\/ieomsociety.org\/ieom2019\/proceedings\/","title":{"rendered":"Proceedings"},"content":{"rendered":"

Proceedings – 2019 IEOM Bangkok<\/strong><\/span><\/h2>\n

ISBN: <\/strong>978-1-5323-5948-4\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 ISSN: 2169-8767<\/p>\n

\n

ID 011 Anaerobic Digestion of Kitchen and Sewage Sludge Bio waste to Biogas using Engineered Bio catalysis<\/strong><\/a>
\nM. M. Manyuchi, BioEnergy and Environmental Technology Centre, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
\nDepartment of Chemical and Processing Engineering, Faculty of Engineering, Manicaland State University of Applied Sciences, Zimbabwe
\nC. Mbohwa, BioEnergy and Environmental Technology Centre, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
\nM. Mpeta, Department of Environmental Engineering, Faculty of Engineering, Chinhoyi University of Technology, Zimbabwe
\nE. Muzenda, BioEnergy and Environmental Technology Centre, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
\nDepartment of Chemical, Materials and Metallurgical Engineering, Faculty of Engineering and Technology, Botswana International University of Science and Technology, P Bag 16, Palapye, Botswana<\/p>\n

ID 012 Operations improvement in a manufacturing business of make-to-order special vehicles<\/strong><\/a>
\nIn\u00eas Azevedo, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, s\/n 4200-465 Porto, Portugal
\nVera L. Migueis and Americo Azevedo, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, s\/n 4200-465 Porto, Portugal
\nINESC TEC, Rua Dr. Roberto Frias, Campus da FEUP, 4200-465 Porto, Portugal<\/p>\n

ID 013 Methane Generation from Landfill Waste as a Resource Recovery Strategy<\/strong><\/a>
\nMercy Manyuchi, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
\nDepartment of Chemical and Processing Engineering, Faculty of Engineering, Manicaland State University of Applied Sciences, Zimbabwe
\nC. Mbohwa, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
\nM. Mpeta, Department of Environmental Engineering, Faculty of Engineering, Chinhoyi University of Technology, Zimbabwe
\nE. Muzenda, Department of Chemical Engineering and Technology, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
\nDepartment of Chemical, Materials and Metallurgical Engineering, Faculty of Engineering and Technology, Botswana International University of Science and Technology, P Bag 16, Palapye, Botswana<\/p>\n

ID 014 Environmental Impacts for Setting up a Waste to Energy Landfill Site<\/strong><\/a>
\nM. M. Manyuchi, BioEnergy and Environmental Technology Centre, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
\nDepartment of Chemical and Processing Engineering, Faculty of Engineering, Manicaland State University of Applied Sciences, Zimbabwe
\nC. Mbohwa, BioEnergy and Environmental Technology Centre, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
\nM. Mpeta, Department of Environmental Engineering, Faculty of Engineering, Chinhoyi University of Technology, Zimbabwe
\nE. Muzenda, BioEnergy and Environmental Technology Centre, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
\nDepartment of Chemical, Materials and Metallurgical Engineering, Faculty of Engineering and Technology, Botswana International University of Science and Technology, P Bag 16, Palapye, Botswana<\/p>\n

ID 015 Projector Nonlinear Gamma Effect Reduction for Fringe Projection<\/strong><\/a>
\nDr. Javier Cruz Salgado, Technology Development Department, Universidad Polit\u00e9cnica del Bicentenario, Silao Guanajuato, 36283, M\u00e9xico<\/p>\n

ID 020 Integrated Quality Environmental Management Practices and its Impact on Operational and Environmental Performances in Food Processing SMEs<\/strong><\/a>
\nJamaludin K.R., Hayati Habibah Abdul Talib & Syed Ali Raza Shah, Razak Faculty of Technology and Informatics, Universiti Teknologi Malaysia, Jalan Sultan, Yahya Petra, 54100 Kuala Lumpur, Malaysia<\/p>\n

ID 021 Contractors Perception towards Excavation Hazard<\/strong><\/a>
\nClinton Aigbavbao, Sustainable Human Settlement and Construction Research Centre, Department of Construction Management & Quantity Surveying, University of Johannesburg, Doornfontein Campus, Johannesburg, 2028, South Africa
\nZakari Mustapha, School of Engineering, Department of Building Technology, Cape Coast Technical University, Cape Coast, Ghana
\nWellington Didi Thwala, Sustainable Human Settlement and Construction Research Centre, Department of Construction Management & Quantity Surveying, University of Johannesburg, Doornfontein Campus, Johannesburg, 2028, South Africa<\/p>\n

ID 022 Major Excavation Hazard in Cape Coast Metropolis<\/strong><\/a>
\nWellington Didi Thwala, Sustainable Human Settlement and Construction Research Centre, Department of Construction Management & Quantity Surveying, University of Johannesburg, Doornfontein Campus, Johannesburg, 2028, South Africa
\nZakari Mustapha, School of Engineering, Department of Building Technology, Cape Coast Technical University,
\nCape Coast, Ghana
\nClinton Aigbavbao, Sustainable Human Settlement and Construction Research Centre, Department of Construction Management & Quantity Surveying, University of Johannesburg, Doornfontein Campus, Johannesburg, 2028, South Africa<\/p>\n

ID 023 Contractors Perception towards Excavation Hazard<\/strong><\/a>
\nClinton Aigbavbao and Wellington Didi Thwala, Sustainable Human Settlement and Construction Research Centre, Department of Construction Management & Quantity Surveying, University of Johannesburg, Doornfontein Campus, Johannesburg, 2028, South Africa
\nZakari Mustapha, School of Engineering, Department of Building Technology, Cape Coast Technical University, Cape Coast, Ghana<\/p>\n

ID 024 Major Excavation Hazard in Cape Coast Metropolis<\/strong><\/a>
\nClinton Aigbavbao and Wellington Didi Thwala, Sustainable Human Settlement and Construction Research Centre, Department of Construction Management & Quantity Surveying, University of Johannesburg, Doornfontein Campus, Johannesburg, 2028, South Africa
\nZakari Mustapha, School of Engineering, Department of Building Technology, Cape Coast Technical University, Cape Coast, Ghana<\/p>\n

ID 025 Conceptual Framework to Estimate Continuous Improvement Project Success in Hospitals<\/strong><\/a>
\nFernando Gonzalez-Aleu, Department of Engineering, Universidad de Monterrey, San Pedro Garza Garc\u00eda, NL 66238, Mexico
\nEileen M. Van Aken, Grado Department of Industrial and Systems Engineering, Virginia Tech, Blacksburg, VA 24061, USA
\nJennifer Cross, Department of Industrial Engineering, Texas Tech University, Lubbock, TX 79409-3061, USA
\nWiljeana Glover, Schlesinger Fund for Global Healthcare Entrepreneurship, Babson College, Babson Park, MA 02457-0310, USA<\/p>\n

ID 026 Process Standardization: Process Improvement in the Inbound Logistics Department of An Aquaculture Manufacturing Firm<\/strong><\/a>
\nJohn Paolo Isip, La Consolacion University Philippines, Philippines
\nHazel Caparas, Bulacan State University, Philippines<\/p>\n

ID 027 Ethical Leaderships and Organizational Culture of Student Organization at Indonesian Private University<\/strong><\/a>
\nMahendra Fakhri, Mahir Pradana and Dita Puri Utami, Telkom University, Jalan Terusan Buah Batu, Bandung, 40257, Indonesia<\/p>\n

ID 028 Degradation of Water Hyacinth (Eichhornia Crassipes) to Vermicompost through Application of the Vermicomposting Technology<\/strong><\/a>
\nMercy M. Manyuchi and Charles. Mbohwa, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
\nEdison. Muzenda, Department of Chemical Engineering Technology, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
\nDepartment of Chemical, Materials and Metallurgical Engineering, Faculty of Engineering and Technology, Botswana International University of Science and Technology, P Bag 16, Palapye, Botswana
\nTrevor. N. Mutusva, Department of Mathematical Sciences, School of Industrial Sciences and Technology, Harare Institute of Technology, Zimbabwe
\nMiranda Mpeta, Department of Environmental Engineering, Faculty of Engineering, Chinhoyi University of Technology, Zimbabwe<\/p>\n

ID 029 The Application of Lean Manufacturing to Reduce Setup Time of a Printing Process<\/strong><\/a>
\nKasarin Chivatxaranukul, Aeronautic Engineering, Vincent Mary School of Engineering, Assumption University, Thailand<\/p>\n

ID 030 Combination of Tolerances of False Causes of Failure in Neuro psychotics Structures of the prediction for the Reliability of Refurbished Systems<\/strong><\/a>
\nFereidoun Heidari Takabi, Maintenance and methods Department, South pars gas complex, Asaluye, Iran<\/p>\n

ID 031 Vision Guided Robotics Research Study<\/strong><\/a>
\nAnnamalai Pandian and Kyle Bruce, Mechanical Engineering Department, Saginaw Valley State University, University Center, MI 48710, USA<\/p>\n

ID 032 An Improved Malaysian Automotive Industry Resin Supply Chain Framework<\/strong><\/a>
\nRosdan Bin Rosman and Sha\u2019ri Mohd. Yusof, Razak Faculty of Technology & Informatics, Universiti Teknologi Malaysia, Jalan Semarak, Malaysia<\/p>\n

ID 033 Customer Churn Prediction Using a New Criterion and Data Mining; A Case Study of Iranian Banking Industry<\/strong><\/a>
\nDavoud Gholamiangonabadi and Jamal Shahrabi, Department of Industrial Engineering and Management Systems, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
\nSeyed Mohamad Hosseinioun, Industrial and Systems Engineering Department, Northern Illinois University, Chicago, USA
\nSanaz Nakhodchi, Department of Computer Engineering, Iran University of Science and Technology, Tehran, Iran
\nSoma Gholamveisy, Department of Industrial Engineering, Islamic Azad University (South Tehran Branch), Tehran, Iran<\/p>\n

ID 034 A Study of the Owners Related Factors affecting the Performance of Tertiary Educational Building (TEB) Projects<\/strong><\/a>
\nAdedokun and Olufisayo Adewumi, Department of Quantity Surveying, School of Environmental Technology, Federal University of Technology, Akure, Nigeria<\/p>\n

ID 039 Reasoning Types in An Industrial Engineering\/Operations Management<\/strong><\/a>
\nMuhittin Oral, Graduate School of Business, \u00d6zye\u011fin University, Istanbul, Turkey
\nOssama Kettani, Modellium, Inc., Centre Ville, Qu\u00e9bec City, Canada<\/p>\n

ID 040 Device Design For SAE 1020 Steel Tool Storage Applied To Automotive Industry<\/strong><\/a>
\nMarc\u00edlio Antunes Leite Filho, Rosinei Batista Ribeiro, Adriano Jos\u00e9 Sorbile de Souza, Jos\u00e9 Wilson de Jesus Silva and Wellington de Oliveira, Post-Graduation Program in Design, Technology and Innovation, Lorena, UNIFATEA, Brazil<\/p>\n

ID 041 Mining Waste Management for Sustainable Mining Practices<\/strong><\/a>
\nM. M. Manyuchi and C. Mbohwa, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
\nE. Muzenda, Department of Chemical Engineering Technology, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
\nDepartment of Chemical, Materials and Metallurgical Engineering, Faculty of Engineering and Technology, Botswana International University of Science and Technology, P Bag 16, Palapye, Botswana<\/p>\n

ID 050 Importance of Traceability, quality and safe food for good health of human<\/strong><\/a>
\nKhan Mohammad Elyas and Agriculturist Ripon Kumar Ghose<\/p>\n

ID 056 A Quality Control-Based In-process Artificial Neural Network Surface Roughness Prediction System<\/strong><\/a>
\nPoTsang B. Huang, Department of Industrial and Systems Engineering, Chung Yuan Christian University, Taoyuan City, Taiwan
\nJosephine D. German, Rodalyn O. Mabanag, and Gabrielle Quirino, Department of Industrial Engineering and Service Engineering Management, Mapua Institute of Technology, Manila<\/p>\n

ID 061 Time Estimation for Container Handling and Yard Arrangement<\/strong><\/a>
\nEtsuko Nishimura, Graduate School of Maritime Sciences, Kobe University, 5-1-1 Fukae-minami, Higashinada, Kobe 658-0022, JAPAN<\/p>\n

ID 062 Application of Hyperbinomial Distribution in Developing a Modified p-chart<\/strong><\/a>
\nShourav Ahmed, Gulam Kibria and Kais Zaman, Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh<\/p>\n

ID 063 Modelling for Hospital Rating Improvements on peer review sites considering region specific factors<\/strong><\/a>
\nMayukh Saha, Dr. Jitendra Kumar Jha and Dr. J Maiti, Department of Industrial & Systems Engineering, Indian Institute of Technology, Kharagpur, 721302, India<\/p>\n

ID 064 Potential to use Bio char in Mercury Removal from Gold Mining Tailings Wastewater<\/strong><\/a>
\nM. M. Manyuchi and C. Mbohwa, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
\nE. Muzenda, Department of Chemical Engineering Technology, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
\nDepartment of Chemical, Materials and Metallurgical Engineering, Faculty of Engineering and Technology, Botswana International University of Science and Technology, P Bag 16, Palapye, Botswana<\/p>\n

ID 065 Process of Recovering Diesel from Waste Plastics: A Review<\/strong><\/a>
\nIgnatio Madanhire, Simon Chinguwa and Nyahunda Liberty, Department of Mechanical Engineering, University of Zimbabwe, P.O Box MP167, Mount Pleasant, Harare, Zimbabwe
\nCharles Mbohwa, Department of Quality Management and Operations Management, University of Johannesburg, P. O. Box 524, Auckland Park 2006, Johannesburg, South Africa<\/p>\n

ID 066 E-Waste Recycling to Recover Base and Precious Metals<\/strong><\/a>
\nIgnatio Madanhire and Liberty Nyahunda, Department of Mechanical Engineering, University of Zimbabwe, P.O Box MP167, Mount Pleasant, Harare, Zimbabwe
\nSimon Chinguwa and Charles Mbohwa, Department of Quality Management and Operations Management, University of Johannesburg, P. O. Box 524, Auckland Park 2006, Johannesburg, South Africa<\/p>\n

ID 067 Development of Mechanical Solar Tracker Design<\/strong><\/a>
\nIgnatio Madanhire, Tauyanashe Chikuku and Liberty Nyahunda, Department of Mechanical Engineering, University of Zimbabwe, P.O Box MP167, Mount Pleasant, Harare, Zimbabwe
\nCharles Mbohwa, Department of Quality Management and Operations Management, University of Johannesburg, P. O. Box 524, Auckland Park 2006, Johannesburg, South Africa<\/p>\n

ID 068 Models and Metaheuristics for the Pollution Traveling Salesman Problem<\/strong><\/a>
\nPaolo Toth, Valentina Cacchiani and Carlos Contreras-Bolton, DEI, University of Bologna, Viale Risorgimento 2, 40136 Bologna, Italy
\nJohn W. Escobar, Pontificia Universidad Javeriana, Cl. 18 #118-250, Cali, Colombia
\nLuis M. Escobar-Falcon, Technological University of Pereira, Cl. 27 #10-02 Barrio A\u00b4 lamos, Pereira, Colombia
\nRodrigo Linfati, University of Bio Bio, Av. Collao 1202, Concepcion, Chile<\/p>\n

ID 069 A Risk Management Based Econometric Modelling of Insurance Underwriting in Engineering Projects<\/strong><\/a>
\nEngr. Ronwaldo J. Reyes and Marvin I. Noro\u00f1a, School of Industrial Engineering and Engineering Management, Mapua University, 658 Muralla Street, Intramuros, Manila, Philippines<\/p>\n

ID 070 Customer visit segmentation in an online retail market<\/strong><\/a>
\nPartha Sarathi Mishra and Dr. Jitendra Kumar Jha, Department of Industrial and Systems Engineering, Indian Institute of Technology, Kharagpur, 721302, India<\/p>\n

ID 071 A Dual Approach to the Harmonized Model between Inventory Reduction and Heijyunka (Production Leveling) Based on the Minimum Average-Energy Principle<\/strong><\/a>
\nTsuyoshi Kurihara, Certified and Accredited Meteorologist, Hiroshima, Japan
\nTakaaki Kawanaka, Institute for Innovation in International Engineering Education, Graduate School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, Japan
\nHiroshi Yamashita, Department of Commerce, Meiji University, 1-1 Kanda-Surugadai, Chiyoda-ku, Tokyo, Japan<\/p>\n

ID 072 Ranking of the Factors for Resilient Humanitarian Supply Chain: A TOPSIS Approach<\/strong><\/a>
\nRajesh Kr Singh, Management Development Institute, Gurgaon, India
\nAyush Gupta, Production and Quantitative Methods Area, Indian Institute of Management Ahmedabad, Ahmedabad, India<\/p>\n

ID 073 Virtual DNA (V-DNA) Applications: A Systematic Literature Review<\/strong><\/a>
\nAlaa M. Ubaid and Fikri T. Dweiri, College of Engineering, University of Sharjah, University City, Sharjah, UAE<\/p>\n

ID 074 Including Containers with Dangerous Goods in the Slot Planning Problem<\/strong><\/a>
\nKiros Gebrearegawi Kebedow, School of Mathematical and Statistical Sciences, Hawassa University, Hawassa, Ethiopia
\nJohan Oppen, Molde University College, Specialized University in Logistics, Molde, Norway<\/p>\n

ID 075 Excellent Performance Realization Methodologies (EPRMs): Elements and Framework<\/a><\/strong>
\nAlaa M. Ubaid and Fikri T. Dweiri, College of Engineering, University of Sharjah, University City, Sharjah, UAE<\/p>\n

ID 076 An Employee Retention Model for Millennials in the Philippine Telco Industry<\/strong><\/a>
\nJohn Jerjie C. Reyes and Marvin I. Norona, School of Industrial Engineering and Engineering Management, Mapua University, Manila City, Philippines<\/p>\n

ID 078 Heuristic Approaches for Optimizing Multi-echelon Multi-facility Green Reverse Logistics Network Design<\/strong><\/a>
\nK Nageswara Reddy, Akhilesh Kumar, Department of Industrial and Systems engineering, Indian Institute of Technology, Kharagpur, West Bengal, India, 721302<\/p>\n

ID 079 Work-related psychosocial factors associated with lower back pain among male handicraft workers in Jaipur, India<\/strong><\/a>
\nDipayan Das, Awadhesh Kumar and Monica Sharma, Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur, Rajasthan, India<\/p>\n

ID 080 The Improvement of Healthcare Management in Thailand via IE Tools: A Survey<\/strong><\/a>
\nChawis Boonmee and Chompoonoot Kasemset, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, Thailand<\/p>\n

ID 081 Collision Probability Analysis in a Parallel Machines Model When the Number of Jobs Is Constrained <\/strong><\/a>
\nTaiki Otsuka and Eishi Chiba, Department of Industrial and Systems Engineering, Hosei University, 3-7-2 Kajino-cho, Koganei-shi, Tokyo, 184-8584 Japan<\/p>\n

ID 082 A Conceptual Framework Of Multi Objective Optimization For International Perishable Food Supply Chain Under Stochastic Demand And Fuzzy Deterioration Rate<\/strong><\/a>
\nSamatthachai Yamsa-ard, Department of Research, NEOMA Business School, Mont Saint Aignan, 76130, France
\nFouad Ben Abdelaziz, Department of Information systems, Supply chain management and Decision-making, NEOMA Business School, Mont Saint Aignan, 76130, France<\/p>\n

ID 083 A Three Stage DEA Approach for Evaluating the Performance of Supply Chains: Case Study of Public Pharmaceutical Products Supply chains in Morocco<\/strong><\/a>
\nZoubida Chorfi and Abdelaziz Berrado, Equipe Analyse, mod\u00e9lisation et int\u00e9gration des processus et syst\u00e8mes (EAMIPS), Ecole Mohammadia d\u2019Ing\u00e9nieurs, Mohammed V University of Rabat, Morocco
\nLoubna Benabbou, D\u00e9partement Sciences de la Gestion, Universit\u00e9 du Qu\u00e9bec \u00e0 Rimouski (UQAR), Campus de L\u00e9vis, Qu\u00e9bec, Canada<\/p>\n

ID 084 Sustainable Biodegradable Packaging Material: A Solution for Decreasing Available Capacity of Landfills in the Philippines<\/strong><\/a>
\nJuan Miguel N. Dinglasan, Industrial Engineering Department, Technological Institute of the Philippines, Quezon City, Philippines<\/p>\n

ID 085 Theoretical Framework to Analyze Conflict between Marketing and Operations Strategy: A Product Life Cycle Perspective<\/strong><\/a>
\nChitresh Kumar and Anirban Ganguly, Jindal Global Business School, O. P. Jindal Global University, Sonipat, Haryana 131001, India<\/p>\n

ID 086 Production Optimization of Small \u2013 Sized Sugarcane Farms in the Philippines through Optimal Variety Mix using Compromise Programming<\/a><\/strong>
\nAlec Steven L. Ardan, John Ruther A. Faustino, Mariel Jorinda G. Garcia, Patrick Jerome M. Lacap, Marc Jesm Malapitan, Julius C. Palagam, John Rowe V. Pineda and Romalyn L. Galingan, Department of Industrial Engineering, Technological Institute of the Philippines, Quezon City Philippines<\/p>\n

ID 087 Banana Peel for the Decontamination of Mercury in Water<\/strong><\/a>
\nGerardo Espinosa, Jacobo Tijerina, Natella Antonyan and Imelda Loera, Universidad de Monterrey, San Pedro Garza Garc\u00eda, Nuevo Le\u00f3n, Mexico<\/p>\n

ID 088 Particle Swarm Optimization for Post Box Collection Routing Problem<\/a><\/strong>
\nWarisa Wisittipanich, Excellent Center in Logistics and Supply Chain Management, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand
\nKritsada Ananthapanyasut, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand<\/p>\n

ID 089 DeepFork: Supervised Prediction of Info Diffusion<\/strong><\/a>
\nRamya Akula, Niloofar Yousefi and Ivan Garibay, Industrial Engineering and Management Systems, University of Central Florida, syedOrlando, USA<\/p>\n

ID 090 Formulation of a Remover to Eliminate Paint in Articles Made of Glass<\/strong><\/a>
\nGerardo Espinosa and Jacobo Tijerina, Universidad de Monterrey, Mexico
\nNatella Antonyan and Imelda Loera, Tecnologico de Monterrey, Mexico<\/p>\n

ID 091 Critical Success Factors for the implementation of Operational Excellence<\/strong><\/a>
\nJacobo Tijerina Aguilera and Diego Andr\u00e9s Mart\u00ednez Trevi\u00f1o, Extension, Consulting and Research Department, University of Monterrey, Monterrey, Nuevo Le\u00f3n 66238, Mexico<\/p>\n

ID 092 A classification of transport mode on a smartphone based on a neural network<\/strong><\/a>
\nTaku Tanichi, Advanced Course in Production Systems Engineering, Salesian Polytechnic Machida, Tokyo 194-0215, Japan
\nYoichi Shimakawa, Department of Computer Science and Technology, Salesian Polytechnic Machida, Tokyo 194-0215, Japan<\/p>\n

ID 093 A study on a routing problem focusing on freight transportations<\/strong><\/a>
\nTatsuya Komiya, Advanced Course in Production Systems Engineering, Salesian Polytechnic Machida, Tokyo 194-0215, Japan
\nYoichi Shimakawa, Department of Computer Science and Technology, Salesian Polytechnic Machida, Tokyo 194-0215, Japan
\nHiroyuki Goto, Department of Industrial & System Engineering, Hosei University Tokyo, Japan<\/p>\n

ID 094 Assessment of accessibility to a facility using a Geographic Information System: Case study of a food desert problem in a suburban area of Tokyo<\/strong><\/a>
\nShun Odahara, Advanced Course in Production Systems Engineering, Salesian Polytechnic Machida, Tokyo 194-0215, Japan
\nYoichi Shimakawa, Department of Computer Science and Technology, Salesian Polytechnic Machida, Tokyo 194-0215, Japan<\/p>\n

ID 095 Risk Exposure and Factor Effect Study of Selected Car Accident Parameters on Accident Severity<\/strong><\/a>
\nKhalid Alzoubi, Department of Industrial Engineering, Jordan University of Science and Technology, P.O. Box 3030, Irbid 22110, Jordan
\nSharaf Alkheder, Department of Civil Engineering, Kuwait University, P.O. Box 5969, Safat 13060, Kuwait<\/p>\n

ID 096 Advanced preservation policy for deteriorating products during transportation and at retailer within a supply chain<\/strong><\/a>
\nMuhammad Waqas Iqbal and Yuncheol Kang, Department of Industrial Engineering, Hongik University, Seoul, South Korea<\/p>\n

ID 097 The Development of the Maturity Model to evaluate the Smart SMEs 4.0 Readiness<\/a><\/strong>
\nNilubon Chonsawat, Ph.D.\u2019s Degree Program in Industrial Engineering, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand
\nApichat Sopadang, Department of Industrial Engineering, Excellent Center in Logistics and Supply Chain Management, Chiang Mai University, Chiang Mai 50200, Thailand<\/p>\n

ID 098 Customer Churn Prediction Using a Meta-Classifier Approach; A Case Study of Iranian Banking Industry<\/strong><\/a>
\nDavoud Gholamiangonabadi and Adele Shahi, Department of Industrial Engineering and Management System, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
\nSanaz Nakhodchi, Department of Computer Engineering, Iran University of Science and Technology, Tehran, Iran
\nAmmar Jalalimanesh, Iranian Research Institute for Information Science and Technology (IRANDOC), Tehran, Iran<\/p>\n

ID 099 Assessing productivity changes using the bootstrapped Malmquist index: the case study of the Iranian construction industry<\/strong><\/a>
\nAlireza Nabavieh, Kaveh M. Cyrus and Davoud Gholamiangonabadi, Department of Industrial Engineering and Management Systems, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
\nSoma Gholamveisy, Department of Industrial Engineering, Islamic Azad University (South Tehran Branch), Tehran, Iran<\/p>\n

ID 100 Sustainability Framework for Farm Level Cotton Supply Chain Management<\/strong><\/a>
\nSonia Nazeer and Puwanart Fuggate, School of Logistic and Supply Chain, Naresuan University, Phitsanulok, Thailand<\/p>\n

ID 101 Dehydration And Sieving to 150 Microns Process of Melon Seed<\/strong><\/a>
\nGerardo Espinosa Garza and Jacobo Tijerina Aguilera, Extension, Consulting and Research Division, Universidad de Monterrey, Av. Ignacio Morones Prieto 4500 Pte., San Pedro Garza Garcia, N.L., 66238, Mexico
\nNatella Antonyan and Imelda Loera Hernandez, Escuela de Ingenieria y Ciencias, Tecnologico de Monterrey, G. Sada 2501, Monterrey, N.L., 64849, Mexico<\/p>\n

ID 109 Cost Oriented Failure Consequence Analysis of Machine Components- A Case Study<\/strong><\/a>
\nPratik Nandanwar and Dr. Pravin P. Tambe, Department of Industrial Engineering, Shri Ramdeobaba College of Engineering & Management, Nagpur, India<\/p>\n

ID 110 Managing Production and Sales of Refurbished Products under Capacity Limitations<\/strong><\/a>
\nMayukh Saha, Vaibhav Agrawal and Dr. Akhilesh Kumar, Department of Industrial and Systems Engineering, Indian Institute of Technology, Kharagpur, West Bengal, India<\/p>\n

ID 111 Location model minimizing distances between EV charging stations<\/strong><\/a>
\nYohei Kakimoto, Graduate School of Science and Engineering, Hosei University, Tokyo, Japan
\nHiroyuki Goto, Department of Industrial & System Engineering, Hosei University Tokyo, Japan
\nYoichi Shimakawa, Department of Computer Science and Technology, Salesian Polytechnic Machida, Tokyo, Japan
\nPrommas Panote, Graduate School of Science and Engineering, Hosei University, Tokyo, Japan<\/p>\n

ID 112 Fleet management through Vehicle Routing Problem and Multi Depot Vehicle Scheduling Problem: A Literature Review<\/a><\/strong>
\nZiyad bahou, Equipe MOAD6, Mohammadia School of Engineers, Mohammed V University of Rabat, Morocco
\nJamal Elhachmi, Laboratory of Electronics and Telecommunications, Mohammadia School of Engineers (EMI), Rabat, Morocco<\/p>\n

ID 113 Decrease Scrap of Railroader Axle on Caraj\u00e1s Railroad<\/strong><\/a>
\nFrancisco das Chagas Barbosa Nascimento, Reliableness of Wagon Maintenance Management, Caraj\u00e1s Railroad to VALE S.A., Av. dos Portugueses, S\/N Anjo da Guarda, CEP 65085 580 S\u00e3o Lu\u00eds, MA \u2013 Brasil
\nGerisval Pessoa, North Carrier Capacity and Operational Process of Management, Executive Management of Maintenance Engineering EFC VALE S.A., Av. dos Portugueses, S\/N Itaqui, CEP 65085 580 S\u00e3o Lu\u00eds, MA \u2013 Brasil<\/p>\n

ID 114 Success Factors for ERP Implementation: a Systematic Literature Review<\/strong><\/a>
\nMohamed-Iliasse Mahraz and Abdelaziz Berrado, D\u00e9partement G\u00e9nie industriel, Ecole Mohammadia d\u2019Ing\u00e9nieurs, Mohammed V University of Rabat, Loubna Benabbou, D\u00e9partement Sciences de la Gestion, Universit\u00e9 du Qu\u00e9bec \u00e0, Rimouski (UQAR) Campus de L\u00e9vis, Qu\u00e9bec Morocco<\/p>\n

ID 115 Optimisation of Distribution System in the Retail Industry: An Australian Retail Industry<\/strong><\/a>
\nMohammad Amjad, Faculty of Engineering and Information Technology, University of Technology Sydney, NSW 2007, Australia
\nJay Daniel, Derby Business School, University of Derby, Derby, DE22 1GB, UK
\nJose Arturo Garza-Reyes, Centre for Supply Chain Improvement, University of Derby, Derby, DE22 1GB, UK<\/p>\n

ID 117 Redesign of the Raw Material Collection System for the Reduction of the Integrated Total Costs by Ton in a Steel Company<\/strong><\/a>
\nCarlos Perez Sandi Trevi\u00f1o and Luis Enrique Orozco Rubio, Engineering and Technologies Department, University of Monterrey, San Pedro Garza Garc\u00eda, NL 66238, M\u00e9xico
\nJenny D\u00edaz Ram\u00edrez, Engineering and Technologies Department, University of Monterrey, Nuevo Le\u00f3n, M\u00e9xico<\/p>\n

ID 119 A Drivers\u2019 Performance Assessment Model Based on Fuel Economy Measurements<\/strong><\/a>
\nJenny D\u00edaz Ram\u00edrez, Department of Engineering, Universidad de Monterrey, Monterrey, N.L. 66238, Mexico
\nJos\u00e9 Ignacio Huertas, Energy and Climate Change Research Group, School of Engineering and Science, Tecnologico de Monterrrey, Monterrey, N.L., 68849, M\u00e9xico<\/p>\n

ID 120 Aerospace Industry in Queretaro, Mexico: A perspective of Regional Innovation System<\/strong><\/a>
\nChristian Mu\u00f1oz-Sanchez, Mar\u00eda del Rocio Soto-Flores and Luis Rocha-Lona, Business School, National Polytechnic Institute of Mexico, Mexico City, Mexico
\nJose Arturo Garza-Reyes, Centre for Supply Chain Improvement, The University of Derby, Derby, UK<\/p>\n

ID 121 A Literature Review and Further Research Direction in Cross-docking<\/strong><\/a>
\nDollaya Buakum, Graduate Program in Industrial Engineering, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand
\nWarisa Wisittipanich, Excellent Center in Logistics and Supply Chain Management, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand<\/p>\n

ID 122 A methodology for combined maintenance decision with quality control and production scheduling for multi machine system<\/strong><\/a>
\nDr. Pravin P. Tambe, Department of Industrial Engineering, Shri Ramdeobaba College of Engineering & Management, Nagpur, India
\nDr. Makarand S. Kulkarni, Department of Mechanical Engineering, Indian Institute of Technology Bombay, Powai, Mumbai, India<\/p>\n

ID 123 Study on the Classification of Network<\/strong><\/a>
\nShoichi Kaneko, Faculty of Management Information, Yamanashi Gakuin University, 2-4-5 Sakaori, Kofu city, Yamanashi, Japan
\nTakaaki Kawanaka, Institute for Innovation in International Engineering Education, Graduate School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, Japan
\nNyunho Jung, Faculty of Business, Aichi Shukutoku University, 23, Sakuragaoka, Chikusa-ku, Nagoya-city, Aichi Prefecture, Japan
\nHiroshi Yamashita, Department of Commerce, Meiji University, 1-1 Kanda-Surugadai, Chiyoda-ku, Tokyo, Japan
\nMasanobu Matsumaru, Mechanical and Industrial Engineering Department, Kanagawa University, Kanagawa, Japan<\/p>\n

ID 132 A Study of the Design for Trolley School Bag of Elementary Children in Grades 1-3 Using the NIOSH Lifting Equation<\/strong><\/a>
\nChristian T. Chua, Glyda A. Marquez and Tyrine B. Mendez, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
\nJanina Elyse A. Reyes, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines<\/p>\n

ID 133 A Study of the Design for Trolley School Bag of Elementary Children in Grades 1-3 Using the National Institute for Occupational Safety and Health (NIOSH) Lifting Equation<\/a><\/strong>
\nChristian T. Chua, Glyda A. Marquez and Tyrine B. Mendez, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
\nJanina Elyse A. Reyes, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines<\/p>\n

ID 134 Hypothesis Combination using Genetic Algorithm<\/strong><\/a>
\nKuan-Yu Lai, Jhin-Wun Wang and Chien-Liang Liu, Department of Industrial Engineering and Management, National Chiao Tung University, 1001 University Road, Hsinchu, Taiwan 300, ROC<\/p>\n

ID 135 Multiperiod Reliable Uncapacitated Facility Location Problem<\/strong><\/a>
\nMegha Sharma and Sumanta Basu, Operations Management Group, Indian Institute of Management Calcutta, Kolkata, India
\nArnab Adhikari, Operations Management Department, Indian Institute of Management Ranchi, Ranchi, India<\/p>\n

ID 136 Proposal of k-principal points for Binary Data by Introducing a Dendrogram<\/strong><\/a>
\nSunhee Kwon, Graduate School of Business Administration, Meiji University, Tokyo, Japan
\nTakaaki Kawanaka, Institute for Innovation in International Engineering Education, Graduate School of Engineering, The University of Tokyo, Tokyo, Japan
\nHiroshi Yamashita, Department of Commerce, Meiji University, 1-1 Kanda-Surugadai, Chiyoda-ku, Tokyo, Japan<\/p>\n

ID 137 Factors Affecting the Performance of Cold Chain for Export of Thailand\u2019s Longan<\/strong><\/a>
\nNarathip Titlo, Graduate program in Logistics Engineering and Supply chain Management, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, Thailand
\nApichat Sopadang, Department of Industrial Engineering, Excellence Center in Logistics and Supply Chain Management, Chiang Mai University, Chiang Mai, Thailand<\/p>\n

ID 138 Review on Heat Transfer Enhancement in Car Radiator Using Nano Fluids<\/strong><\/a>
\nNandkumar Sadashiv Vele, Research Scholar, RSCOE, Savitribai Phule Pune University, Pune, India
\nProf (Dr.) R. K. Patil, Principal Government Polytechnic College, Hingoli, Maharashtra State, India<\/p>\n

ID 139 Deviation degree between ideal and real of domain transition probability in resource circulation considering production synchronization ratio<\/strong><\/a>
\nTakaaki Kawanaka, Institute for Innovation in International Engineering Education, Graduate School of Engineering, The University of Tokyo, Tokyo, Japan
\nHiroshi Yamashita, Department of Commerce, Meiji University, 1-1 Kanda-Surugadai, Chiyoda-ku, Tokyo, Japan
\nShoichi Kaneko, Faculty of Management Information, Yamanashi Gakuin University, 2-4-5 Sakaori, Kofu city, Yamanashi, Japan<\/p>\n

ID 140 Design and Analysis of Ducted Wind Turbine for Rooftop Installation<\/strong><\/a>
\nAgney Bhakare, Preeti Ranka and Anket Telkapalliwar, B.Tech. in Mechanical Engineering, Veermata Jijabai Technological Institute, Mumbai, 400019, INDIA
\nMandar. V. Tendolkar, Assistant Professor, Mechanical Engineering Department, Veermata Jijabai Technological Institute, Mumbai, 400019, INDIA
\nSanjay M. G., Associate Professor, Mechanical Engineering Department, Veermata Jijabai Technological Institute, Mumbai, 400019, INDIA<\/p>\n

ID 141 How the difference in product characteristics affects the relationship with customers? In the case of the electronics parts industry increasing its focus on the automotive market<\/strong><\/a>
\nChihiro Sato, Graduate School of Economics and Management, Tohoku University, Kawauchi, 27-1, Aoba-ku, Sendai, Miyagi, Japan<\/p>\n

ID 142 Lean Readiness Assessment Model – A Tool for Humanitarian Organizations\u2019 Social and Economic Sustainability<\/strong><\/a>
\nMuhammad Shafiq and Kullapa Soratana, School of Logistics and Supply Chain, Naresuan University, Phitsanulok 65000, Thailand<\/p>\n

ID 143 An Investigation of Student Perspective for E-Learning Readiness Measurement<\/strong><\/a>
\nAulia F. Hadining, Sukanta and Wachid Hidayat, Industrial Engineering Department, State University of Singaperbangsa Karawang, Karawang, Indonesia<\/p>\n

ID 144 CSR Strategies and Pricing Decisions of Competitive Firms under Uncertainty Demands<\/strong><\/a>
\nBo Li, College of management and Economics, Tianjin University, Tianjin, China
\nJunhong Yang, School of Mechanical Engineering, Tianjin University, Tianjin, China<\/p>\n

ID 145 Social Determinants of Health: Global Comparison<\/strong><\/a>
\nSung-Ho Kim, Ph.D., Adjunct Professor at Yonsei University, Korea
\nIk-Whan Kwon, Ph.D., Professor Emeritus, Saint Louis University, U.S.A.<\/p>\n

ID 146 Designing Pricing Strategy under Environmental-Friendly Promotion and Competition<\/strong><\/a>
\nSumanta Basu, Operations Management Group, Indian Institute of Management Calcutta, Kolkata, India
\nArnab Adhikari, Operations Management Department, Indian Institute of Management Ranchi, Ranchi, India<\/p>\n

ID 147 Throughput Rate Calculation by Cycle Time Modeling for Multi Aisles ASRS Using Timed Petri Nets<\/strong><\/a>
\nYassine Boudghene Stambouli, MELT laboratory, University of Tlemcen, Algeria
\nSamir Hamacl, Quartz Laboratory (EA 7393), ECAM-EPMI, Cergy-Pontoise, France<\/p>\n

ID 148 A Knowledge Management Approach to Compare and Develop the ASEAN University Credit Transfer System in Thailand<\/strong><\/a>
\nChayamarnie Bhiriyawanit, College of Arts, Media and Technology, Chiang Mai University, Thailand<\/p>\n

ID 149 Collaborative Supply Chain in Auto Service in India<\/strong><\/a>
\nDebabrata Bhattacharjee, Country Head, Indian Oil Corporation Limited, Yangon Branch, Myanmar<\/p>\n

ID 150 A Workplace Assessment for Visually Impaired and Blind Massage Therapists of a Massage Therapy Franchise in Metro Manila, Philippines<\/strong><\/a>
\nNoriko Hayashi, Januel Ticsay, Krischael Santos and Janne Paula Villaflor, Department of Industrial Engineering, Technological Institute of the Philippines, Manila, Philippines<\/p>\n

ID 151 City Carbon Footprint Adaptation on Green Supply Chain and Logistics of Food Production and Consumption<\/strong><\/a>
\nKunlatida Yachai, Graduate program in Logistics Engineering and Supply chain Management, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, Thailand
\nSate Sampattagul, Department of Industrial Engineering, Center of Excellent on Energy, Economic and Ecological Management (3E), Chiang Mai University, Chiang Mai, Thailand<\/p>\n

ID 152 Decontamination of mercury, cadmium and lead<\/strong><\/a>
\nGerardo Espinosa Garza, Universidad de Monterrey, Monterrey, Nuevo Le\u00f3n, M\u00e9xico
\nPamela Espinosa Alonso, Blanca Nelly Fabela Guardado, Laura Citlali Flores Mart\u00ednez, Katia Margarita Mart\u00ednez L\u00f3pez and Ana Laura Ochoa Tovar, Mar\u00eda Cristina Rend\u00f3n Lara and Jes\u00fas Salvador S\u00e1nchez Mi\u00f1\u00f3n, Tecnologico de Monterrey, Mexico<\/p>\n

ID 153 Green Manufacturing Adoption Framework for Small and Medium Enterprises in Indonesia<\/strong><\/a>
\nIra Setyaningsih, Universitas Gadjah Mada, UIN Sunan Kalijaga Yogyakarta, Yogyakarta, Indonesia<\/p>\n

ID 154 A Markovian Perspective of Airport Departure Process<\/strong><\/a>
\nCh V Sai Praveen and Mayank Anand, Department of Mechanical Engineering, Indian Institute of Technology, Kharagpur, West Bengal, India<\/p>\n

ID 155 Systems Thinking View on Impact of Single Common Tax on Warehousing Industries in India<\/strong><\/a>
\nPriyankshu Mukhopadhya, Shreeya Shahu and Dr. Pravin P. Tambe, Department of Industrial Engineering, Shri Ramdeobaba College of Engineering and Management, Nagpur, Maharashtra 440013, India<\/p>\n

ID 156 Mercury, Cadmium and Lead Removal from Contaminated Water by Processed Lemon Peel<\/strong><\/a>
\nGerardo Espinosa Garza, Alba Victoria Sordo T\u00e9llez, Cassandra Ibarra Barreda, Sergio Garc\u00eda, Emiliano Garza Belden, Juan Jos\u00e9 de Isla and Michelle Aggeler Castellanos, Universidad de Monterrey, Nuevo Le\u00f3n, Mexico<\/p>\n

ID 157 Productivity in the use of beer foam<\/strong><\/a>
\nGerardo Espinosa Garza, Universidad de Monterrey, Monterrey, Nuevo Le\u00f3n, M\u00e9xico<\/p>\n

ID 158 Mercury, Cadmium and Lead Removal by Processed Orange Peel<\/strong><\/a>
\nGerardo Espinosa Garza, Armando Ch\u00e1vez Flores, Mauricio Casas Zu\u00f1iga, Rodrigo Lozano Lozano, Javier Valdez Alatorre, Kevin Hern\u00e1ndez Mart\u00ednez and Daniel Amarante Portill, Universidad de Monterrey, Monterrey, Nuevo Le\u00f3n, M\u00e9xico<\/p>\n

ID 167 An Efficient Storage Allocation in Warehouse to Minimize Travel Distance of Pickers<\/strong><\/a>
\nMd. Saiful Islam, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology, Khulna-9203, Bangladesh
\nMd. Kutub Uddin, Department of Mechanical Engineering, Khulna University of Engineering & Technology, Khulna-9203, Bangladesh<\/p>\n

ID 168 Implementation of JIT in sewing section of a garment industry in Bangladesh to increase productivity<\/strong><\/a>
\nIsrat Parveen, Md. Arif Mia, 1Md. Sujan Ali, Khandoker Rafsun-Ul-Hasan, Md. Moshiur Rahman and Md. Iqbal Mahmud, Department of Textile Engineering, Mawlana Bhashani Science and Technology University, Santosh, Tangail-1902, Bangladesh
\nHaeng Muk Cho, Department of Mechanical Engineering, Kongju National University, Chungcheongnam-do, South Korea<\/p>\n

ID 169 Chemical cleansing process for pipelines with servomechanisms<\/strong><\/a>
\nGerardo Espinosa Garza, Universidad de Monterrey, Monterrey, Nuevo Le\u00f3n, M\u00e9xico<\/p>\n

ID 170 locating an Urban Distribution Center based on Road Safety<\/strong><\/a>
\nMaha BENNANI, MGSI\/ LPEDD, Fes, Morocco<\/p>\n

ID 171 TCSC Integration in National Transmission system of Pakistan to enhance transmission capability: A case study of Hub Jamshoro Section<\/strong><\/a>
\nMukhtiar Ahmed Mahar, Abdul Sattar Larik and Irfan Ahmed Bajkani, Department of Electrical Engineering, Mehran University of Engineering and Technology, SZAB Campus, Khaipur Mirs, Pakistan<\/p>\n

ID 173 Information Systems for Industrial processes support and optimization<\/a><\/strong>
\nTeresa Pereira, Research Center of Mechanical Engineering (CIDEM), Institute of Engineering of Porto of Polytechnic Institute of Porto, ISEP\/P.Porto, Rua Dr. Ant\u00f3nio Bernardino de Almeida, 431, 4200-072, Porto, Portugal
\nFernanda A. Ferreira, Applied Management Research Unit (UNIAG), School of Hospitality and Tourism of Polytechnic Institute of Porto, Rua D. Sancho I, 981 4480-876, Vila do Conde, Portugal
\nAndr\u00e9 Silva, Mechanical Engineering Master Student, Institute of Engineering of Porto of Polytechnic Institute of Porto, ISEP\/P.Porto, Rua Dr. Ant\u00f3nio Bernardino de Almeida, 431, 4200-072, Porto, Portugal<\/p>\n

ID 174 Handling Multi-Objective Fuzzy Production Scheduling Problem with Mould Maintenance through Pigeon Inspired Optimization Algorithm<\/strong><\/a>
\nFu Xiaoyue, Chan Felix T. S. and Chung S. H., Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Kowloon, Hong Kong
\nNiu Ben, College of Management, Shenzhen University, Shenzhen, China
\nQu Ting, School of Electrical and Information Engineering, Jinan University, Guangzhou, China<\/p>\n

ID 175 Real-time Fuzzy Control of the Assembly Line<\/strong><\/a>
\nJiage Huo, Felix T.S. Chan and Carman K.M. Lee, Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong
\nJan Ola Strandhagen, Department of Production and Quality Engineering, Norwegian University of Science and Technology, Trondheim, Norway<\/p>\n

ID 176 Analysis Forecast Production Model: A Mexican Family Firm Proposal<\/strong><\/a>
\nGonzalo Maldonado-Guzm\u00e1n, Centro de Ciencias Econ\u00f3micas y Administrativas, Universidad Aut\u00f3noma de Aguascalientes, Aguascalientes, Ags., M\u00e9xico C.P. 20131
\nJose Arturo Garza-Reyes, Centre for Supply Chain Improvement, University of Derby, Derby, DE22 1GB, UK
\nLizeth Itziguery Solano-Romo, Centro de Ciencias B\u00e1sicas, Universidad Aut\u00f3noma de Aguascalientes, Aguascalientes, Ags., M\u00e9xico C.P. 20131<\/p>\n

ID 177 The Impact of the Introduction of ISO 9001 Standards \u2013 Case of a South African Power Station<\/strong><\/a>
\nSambil Charles Mukwakungu, Matimba Davis Mabasa, Tebogo Lucky Mamela, Semanga Mabuza and Sihle Mankazana, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa<\/p>\n

ID 178 Feasibility analysis of a reusable material that allows photosynthetically active radiation and avoids high temperatures in greenhouses<\/strong><\/a>
\nGerardo Espinosa Garza, Universidad de Monterrey, Mexico
\nEduardo A. Elizondo Garza, Daniel A. Labastida Gamboa, Arturo Mart\u00ednez Torres, Jhasua Carlos Reyna and Victor Garcia Vidal, Tecnologico de Monterrey, Mexico<\/p>\n

ID 179 Quality Signaling through Crowdfunding Pricing<\/strong><\/a>
\nEhsan Bolandifar, Hong Kong<\/p>\n

ID 188 The Impact of Total Quality Management Practices on Organizational Performance of SMEs in Pakistan<\/strong><\/a>
\nKamna Anam, Faculty of Management Sciences, Sir Syed CASE Institute of Technology (SSCIT), Islamabad, Pakistan<\/p>\n

ID 200 Performance-Based Contracts for Energy Efficiency Projects<\/strong><\/a>
\nSam Aflaki, HEC Paris – Operations Management and Information Technology
\nRoman Kapuscinski and Liang Ding, University of Michigan, Stephen M. Ross School of Business<\/p>\n

ID 201 Creation of a RFID to improve productivity and Inventory Control<\/a><\/strong>
\nImelda Loera Hern\u00e1ndez and Natella Antonyan, Tecnologico de Monterrey, Monterrey, Nuevo Le\u00f3n, M\u00e9xico
\nGerardo Espinosa Garza and Jacobo Tijerina Aguilera, Universidad de Monterrey, San Pedro Garza Garc\u00eda, Nuevo Le\u00f3n, M\u00e9xico<\/p>\n

ID 202 Operational Excellence: Concept Review and Meaning Restructuration<\/strong><\/a>
\nJacobo Tijerina Aguilera & Nancy Lucero Tapia Ru\u00edz, Universidad de Monterrey, San Pedro Garza Garc\u00eda, Nuevo Le\u00f3n, M\u00e9xico<\/p>\n

ID 203 Performance and Optimization of Service Rates & Servers for Closed Finite Queueing Systems<\/strong><\/a>
\nL. Kerbache, Department of Information Systems and Operations Management, HEC Paris, France
\nJ. MacGregor Smith, Department of Mechanical and Industrial Engineering, University of Massachusetts at Amherst, Massachusetts 01003, USA<\/p>\n

ID 204 Comparison between Hadoop and Spark<\/strong><\/a>
\nHoussam Benbrahim, Hana\u00e2 Hachimi and Aouatif Amine, Systems Engineering Laboratory, BOSS-Team, National School of Applied Sciences, Ibn Tofail University, Kenitra, Morocco<\/p>\n

ID 205 Are EGGS what you actually think: Here\u2019s something interesting you might have no idea!<\/strong><\/a>
\nMrs. Priya Sachin Deole, Department of physics, G.S. Tompe Art\u2019s, Comm. & Science College, Chandur Bazar, Dist. Amravati (M.S) India
\nMr. Nachiket Sachin Deole and Mrs. Manasi Vyankatesh Ghamande, Department of Engineering Sciences and Humanities, Savitribai Phule University, Pune, India<\/p>\n

ID 206 Creating a KPI Tree for Monitoring and Controlling Key Business Objectives of First Mile Logistics Services<\/strong><\/a>
\nSudipto Dasgupta, Specialist \u2013 Supply Chain Design, Flipkart Internet Pvt. Ltd., Bangalore, India
\nSarvartha Kanchan, Director \u2013 Supply Chain Design, Flipkart Internet Pvt. Ltd., Bangalore, India
\nTridev Kundu, Senior Manager \u2013 Supply Chain Design, Flipkart Internet Pvt. Ltd., Bangalore, India<\/p>\n

ID 216 How Sustainable is Short Food Supply Chains? A Comprehensive Systematic Review<\/strong><\/a>
\nVikas Kumar, Meng Wang and Archana Kumari, Bristol Business School, University of the West of England, Bristol, UK
\nSupalak Akkaranggoon, Khon Kaen University, Nong Khai, Thailand
\nJose Arturo Garza-Reyes, Centre for Supply Chain Improvement, University of Derby, Derby, UK
\nDaiane Neutzling, Universidade de Fortaleza, Fortaleza, Brazil<\/p>\n

ID 217 The Role of Program Advisory Board in Elevating the Degree Program Content<\/strong><\/a>
\nAlbertus Retnanto, Ph.D., Petroleum Engineering, Texas A&M University at Qatar, Doha, Qatar
\nHamid R. Parsaei, Ph.D., P.E., Mechanical Engineering, Texas A&M University at Qatar, Doha, Qatar
\nBoback Parsaei, Integrated Technology Systems, Inc., Houston, Texas<\/p>\n

ID 222 Foreign Exchange Risk Sharing Arrangement and Optimal Inventory Ordering Policies<\/strong><\/a>
\nSuresha Kharvi, Mangalore University Mangalagangotri574199, India
\nT. P.M. Pakkala, Justice K S Hegde Institute of Management, Nitte, Karnataka, India
\nG. Srinivasan, Faculty of Administration, University of Brunswick, Canada<\/p>\n

ID 223 Budget Allocation Model for Public Senior High School Academic Programs<\/strong><\/a>
\nRene D. Estember and Chrystalline Gale Y. Calvez, School of Industrial Engineering and Engineering Management, Mapua University, Manila, Philippines<\/p>\n

ID 224 Design and Simulation Based Validation of a Reconfigurable Manufacturing System<\/strong><\/a>
\nBashir Salah, Industrial Engineering Department, College of Engineering, King Saud University, P.O. Box 800, 11421, Riyadh, Saudi Arabia<\/p>\n

ID 225 Assessment of Health and Safety Issues in a Manufacturing Industry<\/strong><\/a>
\nMunim Shaukat, UMT, Lahore, Punjab, Pakistan<\/p>\n

ID 226 Musculoskeletal risk assessment among the male workers engaged in craft sectors of Jaipur, India<\/strong><\/a>
\nAshish Kumar Singh, Makkhan Lal Meena and Himanshu Chaudhary, Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur, Rajasthan 302017, India<\/p>\n

ID 232 Time Driven Activity Based Costing in Outpatient Logistics<\/strong><\/a>
\nKakrona Din and Duangpun Kritchanchai, Department of Industrial Engineering, Mahidol University, Nakhon Pathom, Thailand
\nAtchara Dokkulab, Ramathibodi Hospital, Bangkok, Thailand<\/p>\n

ID 233 Applying a genetic algorithm to a signboard layout problem based on a flow captured location-allocation problem<\/strong><\/a>
\nNozomi Yoshimura, Gaku Miyai and Yoichi Shimakawa, Department of Computer Science and Technology, Salesian Polytechnic Machida, Tokyo 194-0215, Japan<\/p>\n

ID 234 Application of Value Stream Mapping to Improve Financial Performance of a Production Floor: a Case Study<\/strong><\/a>
\nSubrata Talapatra and Jannatul Shefa, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology, Khulna, Bangladesh<\/p>\n

ID 235 Development of an Online Blood Management System<\/strong><\/a>
\nSubrata Talapatra, Assistant Professor, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology, Khulna, Bangladesh
\nRaihanul Kabir, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology, Khulna, Bangladesh
\nAkash Shingha Bappy, Department of Electronics and Communication Engineering, Khulna University of Engineering & Technology, Khulna, Bangladesh<\/p>\n

ID 236 A Train Cabin Design for Persons with Mobility Impairment and Special Needs: An Ergonomic Intervention<\/strong><\/a>
\nMa. Janice J. Gumasing, Marion Ollie V. Zerrudo and Josephine D. German, School of Industrial Engineering and Engineering Management, Mapua University<\/p>\n

ID 237 Logistic Strategy to Face Disruption in Freight Multimodal Transportation Network<\/strong><\/a>
\nErly Ekayanti Rosyida, Doctoral Student at Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember Surabaya, Indonesia
\nUniversitas Islam Majapahit, Mojokerto, East Java, Indonesia
\nBudi Santosa and I Nyoman Pujawan, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia<\/p>\n

ID 238 A Cross-Sectional Study on Occupational Risk Factors of BPO Agents in the Philippines<\/strong><\/a>
\nMa. Janice J. Gumasing and Jennifer G. Ilagan, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila 1002, Philippines<\/p>\n

ID 239 A method to ensure IE Standards, Capacity Planning and Actual Measurement in perfect synchronization for right investment decision<\/strong><\/a>
\nLim Chun Pei and Lim Ming Siong, Infineon Technologies (Malaysia) Sdn. Bhd., Malacca 75350, Malaysia
\nTang Ho Hwa, Infineon Technologies Asia Pacific Pte. Ltd., 349253, Singapore<\/p>\n

ID 240 Requirement Analysis for SMART Supply Chain Management for SMEs<\/strong><\/a>
\nPoti Chaopaisarn, Center of Excellence in Logistics and Supply Chain Management, Chiang Mai University, Chiang Mai, Thailand
\nManuel Woschank, Chair of Industrial Logistics, University of Leoben, Leoben, Austria<\/p>\n

ID 241 Field study to identify requirements for smart logistics of European, US and Asian SMEs<\/a><\/strong>
\nPatrick Dallasega, Industrial Automation and Engineering (IEA), Faculty of Science and Technology, Free University of Bozen-Bolzano, Piazza Universit\u00e0 5, 39100 Bolzano, Italy
\nManuel Woschank, Chair of Industrial Logistics, University of Leoben, Erzherzog-Johann-Strasse 3\/1, A-8700 Leoben, Austria
\nSakgasem Ramingwong, Korrakot Yaibuathet Tippayawong and Nilubon Chonsawat, Center of Excellence in Logistics and Supply Chain Management, Chiang Mai University, Thailand<\/p>\n

ID 242 Governance reform of Moroccan Urban Public Transport \u200esector: Current state, \u200echallenges and perspectives<\/strong><\/a>
\nZehmed Karim and Jawab Fouad, High School of Technology (HST), Sidi Mohamed Ben Abdellah University (SMBAU), PB 2427 Imouzzer Road 30000, Fez, Morocco<\/p>\n

ID 243 A Best Practice Reference Model for Agricultural Supply Chain for Rice<\/strong><\/a>
\nW.M.S.K. Weerabahu and L.D.J.F. Nanayakkara, Department of Industrial Management, Faculty of Science, University of Kelaniya, Sri Lanka<\/p>\n

ID 244 Assessing Service Quality in Healthcare Public Sector: An Exploratory on Government Owned Clinics<\/strong><\/a>
\nLinda Theresia, Industrial Engineering Department, Institut Teknologi Indonesia, Indonesia
\nRamon Bangun, Retiree from the Ministry of Industry, Republic of Indonesia<\/p>\n

ID 249 Implementation of Overall Equipment Effectiveness (OEE) in Garment Manufacturing Industry<\/strong><\/a>
\nAteeq ur Rehman, Muhammad Babar Ramzan, Abher Rasheed and Muhammad Salman Naeem, Department of Garment Manufacturing, National Textile University, Faisalabad, Pakistan<\/p>\n

ID 250 Photovoltaic plant Production and Maintenance Forecast<\/strong><\/a>
\nHajej Zied and Rezg Nidhal, LGIPM UFR MIM, Lorraine University, Metz, 57073, France<\/p>\n

ID 251 Simulation-based Optimization Model to Enhance Petroleum Distribution Network in Sri Lanka<\/strong><\/a>
\nW.W.N. Sachini, W.M.S.K. Weerabahu, R. Wickramarchchi, Department of Industrial Management, University of Kelaniya, Sri Lanka<\/p>\n

ID 252 Distributed Job Scheduling Using Multi-Agent System<\/strong><\/a>
\nSandeep Kumar and Bhupesh Kumar Lad, Industrial and Systems Engineering, Discipline of Mechanical Engineering, Indian Institute of Technology Indore, Indore, 453 552, India
\nMaharshi Harshadbhai Dhada, Department of Engineering, Institute for Manufacturing, University of Cambridge, CB3 0FS, UK
\nKshitij Bakliwal, Department of Computer Science, Purdue University, West Lafayette, IN 47907, USA<\/p>\n

ID 253 Iterated Local Search in Physician Scheduling problem<\/strong><\/a>
\nKhalid Al Ghathbar, Mohamed Aly Louly and Mehdi Mrad, Industrial Engineering Department, King Saud University, Riyadh, Kingdom of Saudi Arabia<\/p>\n

ID 254 Application of Lean Manufacturing at Warehouse with Simulation Approach<\/strong><\/a>
\nAndreas Arga Donovan, Humasian Nindya Eyba and Vidya Rianti Siahaan, Undergraduate of Industrial Engineering Study Program, Pembangunan Nasional Veteran Jakarta University, Jl. RS Fatmawati, Pd. Labu, Cilandak, Kota Depok, Daerah Khusus Ibukota Jakarta 12450<\/p>\n

ID 255 Designing Supervisory Policies that Avoid Livelocks in Manufacturing- and Service-Systems Modeled using General Petri Nets: A Tutorial using an Illustrative Example<\/strong><\/a>
\nR. Khalegi, A. Raman and R.S. Sreenivas, Department of Industrial and Enterprise Systems Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USA<\/p>\n

ID 256 A New Approach for Classifying Cross-functional Teams in Product Development Projects<\/strong><\/a>
\nHamdi Bashir, Department of Industrial Engineering and Engineering Management, Sustainable Engineering Asset Management (SEAM) Research Group, University of Sharjah, Sharjah, UAE<\/p>\n

ID 257 Modeling and Analyzing Interrelationships among Project Success Factors and Criteria<\/strong><\/a>
\nGordian Udechukwu Ojiako, Anwar Hamdan, and Hamdi Bashir, Department of Industrial Engineering and Engineering Management, College of Engineering, University of Sharjah, Sharjah, UAE<\/p>\n

ID 258 Structuring Project Interdependencies into a Simple Graphical Hierarchical Model<\/strong><\/a>
\nHelal Al Zaabi and Hamdi Bashir, Department of Industrial Engineering and Engineering Management, University of Sharjah, Sharjah, UAE<\/p>\n

ID 259 The Influence of Customer\u2019s Belief about E-service Delivery Process on Behavioral Intentions: The Mediating Role of Attitude in a B-A-I Model<\/strong><\/a>
\nPiyush Gupta and Amit Sachan, Indian Institute of Management Ranchi, Ranchi, 834008, India<\/p>\n

ID 260 Corporate Sustainability Performance Measurement: A Systematic Review and proposal of an indicator Grid for Manufacturing Companies<\/strong><\/a>
\nAnissa Frini, Department of management science, University of Quebec at Rimouski, Campus of L\u00e9vis, 1595, boulevard Alphonse-Desjardins, L\u00e9vis (Qu\u00e9bec) Canada
\nDominique Diouf, Centre d\u2019\u00c9tude en Responsabilit\u00e9 Sociale et \u00c9cocitoyennet\u00e9 (C\u00c9RS\u00c9), Coll\u00e8ge Rosemont, Montr\u00e9al, Canada
\nDepartment of management, Laval University, Quebec, Canada<\/p>\n

ID 261 Modelling the Effects of Friction on Tool-Chip Interface Temperature During Orthogonal Cutting of Al6061-T6 Aluminium Alloy<\/strong><\/a>
\nSunday Joshua Ojolo, Sikiru Oluwarotimi Ismail and Kelechi Ogbuanu, Department of Mechanical Engineering, University of Lagos, Akoka-Yaba, Lagos, Nigeria<\/p>\n

ID 262 Reflections on Teaching, Research, and Service of a Faculty Member for Those Transitioning into a University Tenure Track Faculty Position<\/strong><\/a>
\nAezeden Mohamed, Faculty of Engineering and Applied Science, Memorial University, Canada St. John\u2019s
\nMechanical Engineering Department, PNG University of Technology, Lae, MP 411, Papua New Guinea
\nJohn Pumwa, Mechanical Engineering Department, PNG University of Technology, Lae, MP 411, Papua New Guinea<\/p>\n

ID 263 Micromechanism and Failure Analysis of INCONEL601<\/strong><\/a>
\nAezeden Mohamed and John Pumwa, Mechanical Engineering Department, PNG University of Technology, Lae, MP 411, Papua New Guinea<\/p>\n

ID 264 Multi-level network planning for blood supply for critical conditions<\/strong><\/a>
\nSahra Mahdavi and Seyyed Mehdi Sajadifar, Department of Industrial engineering, University of Science and Culture, Iran<\/p>\n

ID 265 Generalization Model for Product Development Time in various Market Properties<\/strong><\/a>
\nMahmood Al Kindi, Ahm Shamsuzzoha and Emad Summad, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Oman<\/p>\n

ID 266 Customer economics trust in Business using Instagram<\/strong><\/a>
\nHoma Atefyekta and Nasser Safaie, K. N. Toosi University of Technology, Tehran, Iran<\/p>\n

ID 267 Selection and scheduling of interdependent projects using a modified genetic algorithm<\/strong><\/a>
\nManish Kumar, M L Mittal, Gunjan Soni and Dheeraj Joshi, Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur, India<\/p>\n

ID 268 Random Location under Fixed Zone Storage Strategy – A Case Study of Automobile and Electronic Parts Manufacturing Factory<\/strong><\/a>
\nPikchaya Khongkaew, Industrial Management, Faculty of Business Administration, Thai-Nichi Institute of Technology, Bangkok, 10250, Thailand<\/p>\n

ID 269 A Fuzzy AHP Approach to Evaluate Contributing Factors in the Occurrence of Adverse Events in Philippine Hospitals<\/strong><\/a>
\nJane Frances Cartalla, Kenneth Aynrand Montoya, Shiela May Suyo and Giselle Joy Esmeria, Industrial Engineering Department, De La Salle, University Manila
\nMichael Angelo Promentilla, Chemical Engineering Department, De La Salle University Manila<\/p>\n

ID 270 Impact of Business Process Reengineering of Reverse Logistics for Improving Supply Chain Performance: A Conceptual Framework from a Systematic Review of Literature<\/strong><\/a>
\nThisuri Kaluarachchi, Kalpani Sarathchandra, Ganguli Wijewardhana and Samanthi Weerabahu, Department of Industrial Management, Faculty of Science, University of Kelaniya, Sri Lanka<\/p>\n

ID 271 Mathematical Model of Average waiting time for an Elevator Based on Stochastic Process<\/strong><\/a>
\nYuki Satoh, Advanced Course in Production Systems Engineering, Salesian Polytechnic Machida, Tokyo 194-0215, Japan
\nYoichi Shimakawa, Department of Computer Science and Technology, Salesian Polytechnic Machida, Tokyo 194-0215, Japan<\/p>\n

ID 272 Optimization in Personnel Scheduling for Local Content Verification<\/strong><\/a>
\nRahmat Nurcahyo, Setio Agung Wibowo, Amar Rachman, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, 16424, Indonesia
\nAlan Dwi Wibowo, Agroindustrial Technology Department, Faculty of Agriculture, Universitas Lambung Mangkurat, Jl A Yani KM 36, Banjarbaru, Kalimantan Selatan, Indonesia<\/p>\n

ID 273 A Strategy of Local Content Enhancement in Petroleum and Natural Gas Industry<\/strong><\/a>
\nRahmat Nurcahyo, Ervina Loide Hutasoit and Erlinda Muslim, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, 16424, Indonesia
\nAlan Dwi Wibowo, Agroindustrial Technology Department, Faculty of Agriculture, Universitas Lambung Mangkurat, Jl A Yani KM 36, Banjarbaru, Kalimantan Selatan, Indonesia 70714<\/p>\n

ID 274 A Study of the Implications of Logistics 4.0 in Future Warehousing: A Sri Lankan Perspective<\/strong><\/a>
\nNavodika Karunarathna, Ruwan Wickramarachchi and Kasuni Vidanagamachchi, Department of Industrial Management, Faculty of Science
\nUniversity of Kelaniya, Sri Lanka<\/p>\n

ID 275 Sustainability perspective in aggregate production planning model with fuzzy parameters<\/b><\/strong><\/a>
\nNguyen Truong Thi, Tran Thi My Dung, Vo Thi Kim Cuc, Department of Industrial Management, College of Engineering & Technology, Can Tho University, Vietnam<\/p>\n

ID 276 A New Layout Problem for Order-Picking Warehouses<\/strong><\/a>
\n\u00d6mer \u00d6zt\u00fcrko\u011flu, Department of Business Administration, Ya\u015far University, Izmir, 35100 TURKEY
\nAy\u015feg\u00fcl Ma\u011fara, Schneider Electric, Izmir, 35100 TURKEY<\/p>\n

ID 277 Pilot Static Modeling of Social Business: Case of Kampong Jelekong in Bandung<\/strong><\/a>
\nGadang Ramantoko, Palti M Sitorus, Sri Widyanesti, Faculty of Economics and Business (FEB), Telkom University, Bandung, 40257, Indonesia<\/p>\n

ID 278 Decentralization of Medical Emergency Service to Minimize Response Time<\/strong><\/a>
\nMuhammad Isnaini Hadiyul Umam and Diva Kurnianingtyas, Doctoral Student of Industrial Engineering Department, Institut Teknologi Sepuluh, Nopember, Surabaya, 60111, Indonesia
\nBudi Santosa and Nurhadi Siswanto, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, 60111, Indonesia<\/p>\n

ID 279 Coalescing the Lean and Circular Economy<\/strong><\/a>
\nSimon Peter Nadeem, Jose Arturo Garza-Reyes and Anthony I Anosike, Centre for Supply Chain Improvement, University of Derby, Derby, U.K.
\nVikas Kumar, Bristol Business School, University of the West of England, Bristol, U.K.<\/p>\n

ID 280 Multi-period Temporary Depot Location Problem in Flood Natural Disaster Response<\/strong><\/a>
\nWapee Manopiniwes, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai, Thailand
\nTakashi Irohara, Faculty of Science and Technology, Sophia University, Tokyo, Japan<\/p>\n

ID 281 Developing a Roadmap to Become a World Class Manufacturing Company: A Case of Process Industry in India<\/a><\/strong>
\nDr. Anup P. Chaple, Manager \u2013 Industrial Engineering, UPL Ltd., India
\nSanjay Dharajiya, Lead- World Class Manufacturing, UPL Limited, India<\/p>\n

ID 283 Analyzing The Increase In Production Rate By Implementing Value Stream Mapping (Vsm) In Manufacturing Processes<\/strong><\/a>
\nZehra.K, Shaikh.S2, Tanweer.H, Faheem.A and Zehra.C, Department of Manufacturing Engineering, Mehran university of Engineering & technology, jamshoro, Sindh 67020, Pakistan<\/p>\n

ID 284 Present Scenarios of Energy Utilization in Bangladesh<\/strong><\/a>
\nMohammad Iqbal, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
\nFarhad Hawlader, Department of Petroleum and Mining Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
\nSalma Akhter, Department of Chemical Engineering and Polymer Science, Shahjalal University of Science and Technology, Sylhet, Bangladesh
\nEngr. SumayelMuhamad Mallik, Uiversal Yarn Dyeing Ltd.H#445, R#07, Baridhara DOHS, Dhaka-1206, Bangladesh
\nA. Rashid, Department of Mechanical and Chemical Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh<\/p>\n

ID 285 Trends in Green Vehicle Routing in Reverse Logistics<\/strong><\/a>
\nE. Waidyathilaka, V.K. Tharaka and A.P.R. Wickramarachchi, Department of Industrial management, University of Kelaniya, Sri Lanka<\/p>\n

ID 286 Technology-driven LPG Supply Chain Integration – A Case of Pakistan<\/strong><\/a>
\nFarhan Daud Qazi and Ijaz Ahmad Chaudhry, Industrial Engineering Department, School of Engineering, University of Management and Technology, Lahore, Pakistan
\nOmar Zaid, Production Manager, Hadeed Pakistan Pvt. Limited, Sheikhupura, Pakistan<\/p>\n

ID 287 Network Security analysis using Markov Models<\/strong><\/a>
\nShwetank Sharan, Manish Agrawal and Anubhav Shukla, Department of Industrial and Systems Engineering, Indian Institute of Technology, Kharagpur, INDIA<\/p>\n

ID 288 Analyzing the impacts of Lean tools and techniques on the efficiency of manufacturing organizations<\/strong><\/a>
\nAhmed, F., Shaikh, S.A., Hussain, T., Zehra, K. and Dawood Mehran UET, Jamshoro<\/p>\n

ID 289 A Model for Assessing Maturity of Industry 4.0 in the Banking Sector<\/strong><\/a>
\nOshadhi Bandara, Kasuni Vidanagamachchi and Ruwan Wickramarachchi, Department of Industrial Management, Faculty of Science, University of Kelaniya, Sri Lanka<\/p>\n

ID 290 Case Study on Maintenance Management Framework of a LPG Cylinder Manufacturing Industry<\/strong><\/a>
\nA.Rashid, Department of Mechanical and Chemical Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh
\nMd. Shamsuzzoha Sarker, Department of Mechanical and Chemical Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh<\/p>\n

ID 291 Solving Multi-Objective Assignment Problem with Decision Maker\u2019s Preferences by Using Genetic Algorithm<\/strong><\/a>
\nMd. Mahbubur Rahman, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology, Khulna-9203, Bangladesh
\nMd. Kutub Uddin, Department of Mechanical Engineering, Khulna University of Engineering & Technology, Khulna-9203, Bangladesh<\/p>\n

ID 292 Comparative Study of Systemic Modeling Models for Road Safety<\/strong><\/a>
\nNassima Laaraj, Laboratory of Energy & Sustainable Development (LPE2D), Sidi Mohamed Ben Abdellah University – EST, Road of Imouzzer – BP: 2427 – Fez, Morocco
\nFouad Jawab, LPE2D & Laboratory of International Management Decision techniques and Logistics, Sidi Mohamed Ben Abdellah University – EST, Road of Imouzzer – BP: 2427 – Fez, Morocco<\/p>\n

ID 293 An Optimization-based Approach Model for the Improvement of the Performance of Emergency Medical Service Ambulances<\/strong><\/a>
\nRene D. Estember, Ilynne Geraldine A. Isip, and Ma. Camille C. Misal, School of Industrial Engineering and Engineering Management, Mapua University, Manila, Philippines<\/p>\n

ID 294 Verification and Validation Methods across the Product\u2019s Lifecycle: A systematic Analysis and Review<\/strong><\/a>
\nAineias Karkasinas and Athanasios Rentizelas, Department of Design, Manufacturing and Engineering Management, Strathclyde University, Glasgow, Scotland<\/p>\n

ID 295 A rough-set based-approach for anticipating competitor\u2019s decisions<\/strong><\/a>
\nDhekra Ben Sassi, Department of Information systems, College of Computer Engineering and Science, Prince Sattam Bin Abdulaziz University, Al Kharej, KSA
\nRIADI laboratory, National School of Computer Science, La Manouba, Tunisia
\nFrini Anissa, Department of Management Science, University of Quebec at Rimouski, Levis, Canada 1595, boulevard Alphonse-Desjardins L\u00e9vis (Qu\u00e9bec) Canada<\/p>\n

ID 296 Suitability of Industry 4.0 Concepts for Small and Medium Sized Enterprises: Comparison between an Expert Survey and a User Survey<\/strong><\/a>
\nErwin Rauch, Thomas Stecher, Marco Unterhofer, Patrick Dallasega and Dominik T. Matt, Industrial Automation and Engineering (IEA), Faculty of Science and Technology, Free University of Bolzano, Piazza Universit\u00e0 5, 39100 Bolzano, Italy<\/p>\n

ID 297 Research Advances in Intelligent Transportations Systems (The Case of Advanced Public Transportation Systems<\/strong><\/a>
\nYoussef El Mokaddem and Fouad Jawab, Laboratory of International Management, Decision Making and Logistics (MIDLOG), USMBA, High School of Technology (EST) \u2013 Fez, Morocco<\/p>\n

ID 298 Location of an Urban Distribution Center Based On Ghg Emissions<\/strong><\/a>
\nMaha BENNANI, MGSI\/ LPEDD, Fes, Morocco
\nImane MOUFAD, Laboratory of Energy & Sustainable Development (LPE2D), Morocco<\/p>\n

ID 299 Identification of health system stakeholders in Morocco<\/strong><\/a>
\nFrichi Youness, Jawab Fouad and Boutahari Said, Laboratory of Manufacturing, Energy and Sustainable Development, Sidi Mohamed Ben Abdellah University, Fez, Morocco<\/p>\n

ID 300 Challenges of Total Quality Management in Higher Education Institutions<\/strong><\/a>
\nAbdullah Al-Amri and T.C. Wong, Department of Design, Manufacture and Engineering Management, University of Strathclyde, Glasgow, 75 Montrose St, Glasgow G1 1XJ, UK<\/p>\n

ID 301 Applications of Virtual Reality (VR) as Teaching Tool to Enrich Students Learning<\/strong><\/a>
\nMohamed Ismail, Ph.D., Senior IT Consultant, Texas A&M University at Qatar, Education City, Doha, Qatar
\nHamid R. Parsaei, Ph.D., P.E., Professor, Mechanical Engineering, Texas A&M University at Qatar, Education City, Doha, Qatar
\nBoback Parsaei, Senior Consultant, Integrated Technology Systems, Inc., Houston, Texas<\/p>\n

ID 302 Predictive Maintenance as a Means to Improve the Availability of Centrifugal Slurry Pump at Ergo City Deep Plant<\/strong><\/a>
\nAroon Martinus, Jan Harm C Pretorius and Arie Wessels, Postgraduate School of Engineering Management, University of Johannesburg, Johannesburg, South Africa<\/p>\n

ID 303 Sustainable Biodegradable Packaging Material: A Solution for Decreasing Available Capacity of Landfills in the Philippines<\/strong><\/a>
\nJuan Miguel N. Dinglasan, Master of Science in Industrial Engineering and Management, Polytechnic University of the Philippines, Manila, Philippines<\/p>\n

ID 316 Cognitive Ergonomics and Electrophysiological Measures of Human Attention and Performance<\/strong><\/a>
\nBradley Chase, Industrial & Systems Engineering, Shiley-Marcos School of Engineering, University of San Diego, San Diego, CA 92110, USA<\/p>\n

ID 317 Women Entrepreneurship in Indonesia: current status and future research opportunities<\/strong><\/a>
\nLuh Putu Eka Yani and Ammar Mohamed Aamer, Industrial Engineering Department, Faculty of Engineering and Technology, Sampoerna University, Jakarta, Indonesia<\/p>\n

ID 318 The Role of Digital Leadership on Development of Dynamic Capability with Mediating Variable on Market Orientation and Innovation Capabilities for Indonesia Telecommunication Firms in Facing Disruptive Era<\/strong><\/a>
\nLeonardus W Wasono Mihardjo, Doctor of Research in Management, Bina Nusantara University, West Jakarta, Indonesia
\nRiza A.N. Rukmana, Senior Member, Industrial Engineering, Telkom University, Bandung, Indonesia<\/p>\n

ID 319 Design And Implementation of Automation for Plant Nursery Process Time Reduction<\/strong><\/a>
\nDian Yulianto, Salaya, Nakhon Pathom, Thailand<\/p>\n

ID 320 Aggregated Metrics to Assess Fuel Consumption in Freight Fleets<\/strong><\/a>
\nJenny D\u00edaz Ram\u00edrez, Department of Engineering, Universidad de Monterrey, Monterrey, N.L. 66238, Mexico
\nJos\u00e9 Ignacio Huertas, Energy and Climate Change Research Group, School of Engineering and Science, Tecnol\u00f3gico de Monterrrey, Monterrey, N.L., 68849, Mexico
\nNicolas Giraldo Peralta, Mechanical, Electromechanical, and Biomedical Department, Universidad Antonio Nari\u00f1o, Bogota, D.C., Colombia<\/p>\n

ID 326 Ergonomic Design of an Assistive Propulsion System for Manual Wheelchairs<\/strong><\/a>
\nMadylaine G. Delfin and Danna May G. Mendez, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila<\/p>\n

ID 328 A Study on the Facility Layout and Design of Sugar Plants in the Philippines<\/strong><\/a>
\nMadonna F. Andrada and Muriem R. Biscocho, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila City<\/p>\n

ID 329 A review on the awareness of health care practitioners on medical waste: A Case South African health care<\/strong><\/a>
\nSambil Charles Mukwakungu, Matimba Davis Mabasa, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa<\/p>\n

ID 330 The Impact of Just in Time (JIT) in South African Company’s Inventory Management – Case Studies<\/strong><\/a>
\nSambil Charles Mukwakungu, Matimba Davis Mabasa, Sihle Mankazana, Xolani Mzileni and Sine Aurore Burakeye, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa<\/p>\n

ID 331 The Impact of Corporate Social Responsibility on Consumer Purchase Behaviour in High-Street UK Retailers<\/strong><\/a>
\nChristabel Annora Paramita Parung, S.T., M.Sc., Faculty of Creative Industry, University of Surabaya, Surabaya, Indonesia<\/p>\n

ID 332 Construction industry and women: A review of the barriers<\/strong><\/a>
\nDr Abdussalam Shibani, lecturer in construction and project management Coventry University
\nNoof Alawanati Msc, Construction management Coventry University<\/p>\n

ID 333 An Energy Harvesting Alternative to Wellhead Gas Chokes<\/strong><\/a>
\nAlbertus Retnanto, Ph.D. and Mohamed Idris, Petroleum Engineering, Texas A&M University at Qatar, Doha, Qatar<\/p>\n

ID 334 The Dynamics of Community and Parents Participation: Huyula Culture Approach In Educational Financing In High School, Vocational School And Madrasah Aliyah (Islamic High School) In Gorontalo Province, Indonesia<\/strong><\/a>
\nArwildayanto, Educational Management Program, School of Educational Science, Universitas Negeri Gorontalo
\nPopi Puadah, School of Postgraduate Program, Islamic Education, Universitas Islam Jakarta
\nHendri, School of Engineering, Universitas Mercu Buana<\/p>\n

ID 335 A Multi-Item Inventory Control Model Using Multi-Objective Particle Swarm Optimization (MOPSO)<\/strong><\/a>
\nFerdous Sarwar, Mahjabin Rahman and Mushaer Ahmed, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh<\/p>\n

ID 336 Hidden Markov Models to Detect Early Equipment Failure<\/strong><\/a>
\nPrince Agarwal, K Subash Nirmal, K Nageswara Reddy, Akhilesh Kumar, Department of Industrial and Systems Engineering, Indian Institute of Technology, Kharagpur, West Bengal, India-721302<\/p>\n

ID 337 Development of Educational Process Capability Maturity Model<\/strong><\/a>
\nNedaa Alshaheen, Total Quality Management Techniques Department, Middle Technical University, Baghdad, Iraq
\nSura Alshaheen, Republic of Iraq Ministry of Education, Department of Total Quality Management and Organizational development, Baghdad, Iraq<\/p>\n

ID 338 A Formulation of Priority \u2013 Based Financial Allocation Model for Student Development Activities in SPED Centers<\/strong><\/a>
\nJenalyn Shigella G. Yandug and Phoebe Lie T. Dionisio, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila<\/p>\n

ID 339 Knowledge Management by Farmers in the Win-Win Relationship Project in Land Reform Areas, Northern Thailand<\/strong><\/a>
\nWallratat Intaruccomporn, Department of Agricultural Economy and Development, Faculty of Agriculture, Chiang Mai University, Thailand<\/p>\n

ID 340 Demand Modelling and Establishment of Supply Chain Management for Coconut Sugar in the Philippines<\/strong><\/a>
\nMary Christy O. Mendoza and Erica Racquel G. Cruz, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila<\/p>\n

ID 341 Design issues in Maheshwar handcrafts (MP, India)<\/strong><\/a>
\nPratik Mukesh, Master of Design, Design Discipline, PDPM Indian Institute of Information Technology, design and Manufacturing, Jabalpur, M.P., India<\/p>\n

ID 342 Early Detection of Equipment Failure Using One-class Support Vector Machine<\/strong><\/a>
\nK Subash Nirmal, Prince Agarwal and K Nageswara Reddy, Department of Industrial and Systems Engineering, Indian Institute of Technology, Kharagpur, West Bengal, India<\/p>\n

ID 343 Information Layout Designing of \u2018Barco Display Screen\u2019 used in State Load Despatch Centre at MPPTCL<\/strong><\/a>
\nPratibha Sahu, Master of Design, Design Discipline, PDPM Indian Institute of Information Technology Design & Manufacturing, Jabalpur, M.P., India<\/p>\n

ID 344 Higher initial costs for renewables electricity: Emission, water and job-creation benefits offset the higher costs<\/strong><\/a>
\nMd. Mizanur Rahman, Hasan Mohd Faizal, Aminuddin Saat and Mazlan Abdul Wahid, Department of Thermo Fluids, School of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 UTM, Johor Bahru, Malaysia<\/p>\n

ID 345 Using a Safety Culture Assessment of Multinational Oil\/Gas Companies to Improve Safety Performance in Saudi Arabia<\/strong><\/a>
\nSaleh Al Sulaie and Eui H. Park, Department of Industrial & Systems Engineering, North Carolina A&T State University, Greensboro, NC<\/p>\n

ID 346 Impacts of Gender on Environmental and Cultural Influences in the Adoption of E-Commerce in Saudi Arabia<\/strong><\/a>
\nKhaled Alyami and Eui H. Park, Department of Industrial & Systems Engineering, North Carolina A&T State University, Greensboro, NC, U.S.A.<\/p>\n

ID 347 Optimal production planning of hybrid manufacturing\/remanufacturing systems under deteriorations<\/strong><\/a>
\nAnnie Francie Kouedeu, Jean-Pierre Kenn\u00e9 and Victor Songmene, Department of Mechanical Engineering, Laboratory of Integrated Production Technologies, University of Qurbec, Ecole de technologie sup\u00e9rieure, 1100 Notre-Dame Street West, Montreal, Quebec, Canada<\/p>\n

ID 348 Innovation Process of Music Composing: A Case Study in Conservatory of Music<\/strong><\/a>
\nEvo Sampetua Hariandja, Department of Management Business School, Universitas Pelita Harapan, Tangerang-15811, Indonesia<\/p>\n

ID 349 Dynamic Marketing Capability in Start-up Companies: An Exploratory Investigation of the Female Entrepreneurs<\/strong><\/a>
\nEvo Sampetua Hariandja, Department of Management Business School, Universitas Pelita Harapan, Tangerang-15811, Indonesia<\/p>\n

ID 350 Lean Techniques Application to Improve Product Replacement Process in a Manufacturing Organization: Case of a Brandable Company in Johannesburg, South Africa<\/strong><\/a>
\nSambil Charles Mukwakungu, Matimba Davis Mabasa and Xihlovo Baloyi, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa<\/p>\n

ID 356 Business English as a Global Needs for Entrepreneur Students of Narotama University<\/strong><\/a>
\nElok Damayanti and Agus Sukoco, Narotama University, Arief Rahman Hakim No. 51, Surabaya, Indonesia<\/p>\n

ID 357 The effect of Project Portfolio Selection on Business success: An empirical study in the Indian Auto Component Industry<\/strong><\/a>
\nVilas Kharat, NITIE, Mumbai, Maharashtra, India<\/p>\n

ID 358 Impacts of E-commerce in apparel supply chain<\/strong><\/a>
\nShibbir Ahmad, SUST Gazipur, Bangladesh<\/p>\n

ID 360 Project risk management in Iranian software projects<\/strong><\/a>
\nAli Reza Afshari, Department of Industrial Engineering, Shirvan Branch, Islamic Azad University, Shirvan, Iran<\/p>\n

ID 362 Privacy and Security aware Cryptographic Algorithm for Secure Cloud Data Storage<\/strong><\/a>
\nB. Muthulakshmi, Department of Computer Applications, Kalasalingam Academy of Research and Education, Anand Nagar, Krishnankoil
\nM.Venkatesulu, Department of Information Technology, Kalasalingam Academy of Research and Education, Anand Nagar, Krishnankoil<\/p>\n

ID 363 Modified Multivariate Control Chart Using Spatial Signs and Ranks for Monitoring Process Mean: A Case of t-Distribution<\/strong><\/a>
\nThidathip Haanchumpol, Prapaisri Sudasna-na-Ayudthya and Chansiri Singhtaun, Department of Industrial Engineering, Faculty of Engineering, Kasetsart University, Bangkok, Thailand<\/p>\n

ID 364 Multi-objective Robust Optimization for the Design of Biomass Co-firing Networks<\/a>
\n<\/strong>Jayne Lois G. San Juan and Charlle L. Sy, Industrial Engineering Department, De La Salle University, Manila, Philippines<\/p>\n

ID 365 Factors Investigation for the Development of Medical Device towards Sustainable Product<\/strong><\/a>
\nTaisy Mak and Duangpun kritchanchai, Department of Industrial Engineering, Mahidol University, Salaya, Nakhon Pathom, 73170, Thailand<\/p>\n

ID 366 Autocorrelated Multivariate Control Chart in Cooking Oil Industry<\/strong><\/a>
\nIvan Pudjihardjo, Ig. Jaka Mulyana and Luh Juni Asrini, Industrial Engineering Department, Widya Mandala Surabaya Catholic University, Jl. Kalijudan 37 Surabaya, Indonesia<\/p>\n

ID 367 A Scheduling Model for Full Maintenance of Automated Teller Machines<\/strong><\/a>
\nCarlos Ilagan, Angelia Trinidad, John Lorenz Wee and Charlle Sy, Industrial Engineering Department, De La Salle University, Manila, Philippines<\/p>\n

ID 368 An Optimization Model for the Design of an Off-Grid Micro-Hydro Power Plant<\/strong><\/a>
\nJuan Carlo Hernandez, Carlos Jan Pe\u00f1as, Adrianne Ressa Tiu and Charlle Sy, Industrial Engineering Department, De La Salle University, Manila, Philippines<\/p>\n

ID 369 Carbon Emission Impact on the Logistics of Second Generation Biomass (SGB) in Island Nations: a Case Study of Indonesia<\/strong><\/a>
\nDenny Satria Ika and Hui-Ming Wee, Chung-Yuan Christian University, Taoyuan, Chung-Li, Taiwan<\/p>\n

ID 370 Effect of Using Electronic Map While Driving on Human Error Probability<\/strong><\/a>
\nLovely Lady, Wahyu Susihono, Industrial Engineering Department, University of Sultan Ageng Tirtayasa, Cilegon \u2013 Indonesia<\/p>\n

ID 371 A New Metaheuristics for Solving Traveling Salesman Problem: Partial Comparison Optimization<\/strong><\/a>
\nAntono Adhi, Industrial Engineering Department, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia,
\nIndustrial Engineering Department, Universitas Stikubank, Semarang, Indonesia
\nBudi Santosa and Nurhadi Siswanto, Industrial Engineering Department, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia<\/p>\n

ID 372 Disaster Resilience Index: Development and Validation of a Scorecard for Measuring School Disaster Resilience Using Factor Analysis<\/strong><\/a>
\nRomalyn L. Galingan, Industrial Engineering and Management, Graduate School, Polytechnic University of the Philippines, Sta. Mesa, Manila
\nIndustrial Engineering Program, College of Engineering and Architecture, Technological Institute of the Philippines, Quezon City<\/p>\n

ID 373 Optimization of voltage and frequency by using ‘Ant Colony Optimization’ at hydro-electric power plant output having permanent magnate synchronous generator<\/strong><\/a>
\nOmpal Singh and Arunima Verma, IET Lucknow, Uttar Pradesh, India<\/p>\n

ID 374 A Case Study on Average Handling Time of Calls in Teleperformance Company<\/strong><\/a>
\nRamon C. Gloria III, Frendilyn Myca Valerie P. Ubi\u00f1a and Bradley James D. Villanueva, Department of Industrial Engineering, Technological Institute of the Philippines, 363 P. Casal St., Quiapo, Metro Manila
\nJanina Elyse A. Reyes, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines<\/p>\n

ID 375 Using Statistical Process Control Measures to Minimize Defects in the Plastic Department of Marilao Alerco Industrial Corporation<\/strong><\/a>
\nEugene R. Tamba, Racquel G. Tadina and Val Ryan Aguilar, Industrial Engineering, Technological Institute of the Philippines \u2013 Manila, 1338 Arlegui St. Quiapo, Manila
\nJanina Elyse Reyes, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines<\/p>\n

ID 376 Identifying Drivers of Lean Six Sigma Implementation in the Process Industries: A Case Study<\/strong><\/a>
\nFerdous Sarwar, Farzana Islam, Md Sadman Sakib and Sampa Halder, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh<\/p>\n

ID 377 Developing Green Supply Chains for New Kuwait: A Strategic Approach<\/strong><\/a>
\nGhaliah Al-Mutairi, Mariam Al-Ajran, Hawraa Al-Bather, Fatma Mhaisen, Rawan Al-Humaidi, and Walid Smew, Industrial Engineering Department, American University of the Middle East (AUM), Eqaila, Kuwait<\/p>\n

ID 378 A Case study of 5S Implementation in Inspection Process<\/strong><\/a>
\nKarthik Subburaman, Department of Mechanical Engineering, Veltech Rangarajan Dr Sagunthala R&D Institute of Science and Technology
\nAvadi, Chennai, Tamil Nadu, India<\/p>\n

ID 379 Developing an SPC-EPC Unified Framework to Improve Production Disruption in Chemical Industry in Kuwait<\/strong><\/a>
\nAli Issawy, Bader AlMutawaa, Samer Al khateeb, Osama Ahmad, Abdullah AlHaj Hasan, and Walid Smew, Industrial Engineering Department, American University of the Middle East (AUM), Eqaila, Kuwait<\/p>\n

ID 380 Price-quantity-setting mixed duopoly models: market opening<\/strong><\/a>
\nFernanda A. Ferreira and Fl\u00e1vio Ferreira, Polytechnic Institute of Porto, School of Hospitality and Tourism, Applied Management Research Unit (UNIAG), Rua D. Sancho I, 981, 4480-876 Vila do Conde, Portugal<\/p>\n

ID 381 Implementing DHS algorithms using Artix-7<\/strong><\/a>
\nHafiz Usama Hashmat, Department of Technology, Faculty of Engineering and Technology, The University of Lahore, Lahore, 54000, Pakistan
\nAbdul Rauf, Department of Electrical Engineering, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia
\nUmar Muhammad Ali, Department of Electrical Engineering, Georgia Institute of Technology, North Avenue, Atlanta, GA 30332, USA
\nAbdurrahman Mubeen Ali, Department of Electrical Engineering, FAST- National University of Computer and Emerging Sciences, Lahore, 54000, Pakistan
\nDr. Anjum Ali, Professor of Electrical Engineering, Founder and CEO, RDM Associates, Atlanta, Georgia, USA<\/p>\n

ID 382 Investigating the Adoption of Internet of Things Technology Using Agent Based Simulation<\/strong><\/a>
\nMohammed Basingab, Industrial Engineering Department, King Abdulaziz University, Jeddah, 22252, Saudi Arabia<\/p>\n

ID 383 Circular Economy in Industry: Some Insights and Directions to Implement Circularity<\/strong><\/a>
\nJos\u00e9 Vasconcelos Ferreira and Ana Lu\u00edsa Ramos, GOVCOPP\/Department of Economics, Management, Industrial Engineering and Tourism
\nUniversity of Aveiro, Aveiro, Portugal
\nMarta Miranda Camoesas, Department of Economics, Management, Industrial Engineering and Tourism, University of Aveiro, Aveiro, Portugal<\/p>\n

ID 384 Customer Expectations Analysis on Aircraft Maintenance Outsourcing Companies<\/strong><\/a>
\nRahmat Nurcahyo and Ramdha Dien Azka, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, 16424, Indonesia
\nAlan Dwi Wibowo, Agroindustrial Technology Department, Faculty of Agriculture, Universitas Lambung Mangkurat, Jl A Yani KM 36, Banjarbaru, Kalimantan Selatan, Indonesia<\/p>\n

ID 385 Numerical Simulation for Shoreline Erosion by Using New Formula of Longshore Sediment Transport Rate<\/strong><\/a>
\nSubiyanto and Yudi Nurul Ihsan, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
\nSukono and Sudradjat Supian, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nAceng Sambas, Department of Mechanical Engineering, Universitas Muhammadiyah Tasikmalaya, Indonesia
\nAcmad Rizal, Department of Fishery, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
\nMohammad Fadhli Ahmad, Department of Maritime Technology, School of Ocean Engineering, Universiti Malaysia Terengganu, Malaysia
\nMustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Malaysia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 386 Application of Spatial Weighting Matrix of GSTAR by Using CLARANS Clustering on Farmer Exchange Rates in 32 Provinces in Indonesia<\/strong><\/a>
\nAnnisa Azizah, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nRini Cahyandari and Arief Fatchul Huda, Department of Mathematics, Faculty of Science and Technology, Universitas Islam Negeri Sunan Gunung Djati Bandung, Indonesia
\nSukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nSubiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 387 The LASSO (Least Absolute Shrinkage and Selection Operator) Method to Predict Indonesian Foreign Exchange Deposit Data<\/strong><\/a>
\nTrisha Magdalena Adelheid Januaviani, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Bandung, Indonesia
\nNurul Gusriani, Khafsah Joebaedi and Sukono, Department Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Bandung, Indonesia
\nSubiyanto, Department of Marine Science, Faculty of Fishery and Marine Science, Universitas Padjadjaran, Bandung, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 388 The Completeness of p-Summable Sequences as 2-Normed Spaces<\/strong><\/a>
\nJuan Miguel N. Dinglasan, Industrial Engineering Department, Technological Institute of the Philippines, Quezon City, Philippines
\nShelvi Ekariani, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Andalas University, Padang, Indonesia
\nSukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Bandung, Indonesia
\nSubiyanto, Department of Marine, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Bandung, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 389 Application of Graph Hamilton on Determining the Shortest Route of Trans Metro Bandung<\/strong><\/a>
\nYusuf Ibrahim Abdallah, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nYani Ramdani and Yurika Permanasari, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Islam Bandung, Indonesia
\nSukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nSubiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 390 Numerical Simulation of Interferon Alpha (INF-\u03b1) in Mathematical Model of Immunotherapy<\/strong><\/a>
\nSubiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
\nSukono and Sudradjat Supian, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nYuyun Hidayat, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nAceng Sambas, Department of Mechanical Engineering, Universitas Muhammadiyah Tasikmalaya, Indonesia
\nMustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Malaysia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 391 Analysis Students Abilities in Completing Mathematical Problems Dimension Three in Junior High School<\/strong><\/a>
\nRahmi Wiganda Elastika, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nZulkarnain, Department of Mathematics, Faculty of Teacher Training and Science, Universitas Riau, Indonesia
\nMefa Indriati, Department of Mathematics, Faculty of Teacher Training and Science, Universitas Islam Riau, Indonesia
\nSukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nSubiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 392 Streamlining the Flow of Production System through Elimination the Waste of the Overburden (Muri) for Manual Handling Process<\/strong><\/a>
\nMohd Norzaimi Che Ani, Manufacturing Engineering Section, Universiti Kuala Lumpur \u2013 Malaysian Spanish Institute, Kedah, Malaysia
\nShahrul Kamaruddin, Mechanical and Industrial Engineering Department, Universiti Teknologi Petronas, Perak, Malaysia
\nIshak Abdul Azid, Mechanical Engineering Section, Universiti Kuala Lumpur \u2013 Malaysian Spanish Institute, Kedah, Malaysia<\/p>\n

ID 393 Applications of Arduino Based LFR<\/strong><\/a>
\nSyed Sharjeel Imam, Sapienza University of Rome, Rome, Italy
\nFareed Ahmad, Department of Bioinformatics, Jamia Millia Islamia, New Delhi, India
\nMohammad Sadiq Saeed, Department of Civil Engineering, ZHCET, Aligarh Muslim University, Aligarh, India
\nMohd Ovais R Khan, Department of CSE, Sapienza University of Rome, Rome, Italy<\/p>\n

ID 394 Opportunities for Use of Blockchain Technology in Supply Chains: Australian Manufacturer Case Study<\/strong><\/a>
\nElias Abou Maroun, Faculty of Engineering and Information Technology, University of Technology Sydney, Australia
\nJay Daniel, Derby Business School, University of Derby, UK<\/p>\n

ID 395 Design of Seven Level Dynamic Voltage Restorer For Voltage Sag And Harmonics Mitigation<\/strong><\/a>
\nK Chandrasekaran, University Tunku Abdul Rahman, Kampar, Perak, Malaysia
\nV.K. Ramachandaramurthy, Power Quality Research Group, University Tenaga Nasional, Malaysia<\/p>\n

ID 396 Application of Statistical Process Control on Sunbless Industrial Corporation<\/strong><\/a>
\nJerlyn Borja, Veniceredge Eugenio, Ferdinand Tomas and Ariana Villarico, Department of Industrial Engineering, Technological Institute of the Philippines, Manila, Philippines
\nJanina Elyse Reyes, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines<\/p>\n

ID 397 The Capacitated Team Orienteering Problem<\/strong><\/a>
\nAldy Gunawan and Hoong Chuin Lau, School of Information Systems, Singapore Management University, Singapore, 178902
\nKien Ming Ng and Gordy Adiprasetyo, Department of Industrial Systems Engineering & Management, National University of Singapore, Singapore, 117576
\nVincent F. Yu, Department of Industrial Management, National Taiwan University of Science and Technology, Taipei 106, Taiwan<\/p>\n

ID 398 Engineering Education through Students Engagement in Virtual Learning Space<\/strong><\/a>
\nPuteri Suhaiza Sulaiman, Department of Multimedia, Faculty of Computer Science and Information Technology, UPM Serdang, Malaysia<\/p>\n

ID 399 Linking knowledge sourcing, transformation and exploitation activities for innovation: Evidence from UK manufacturing firms<\/strong><\/a>
\nArif Hartono, Management Department, Faculty of Economics, Universitas Islam Indonesia, Ringroad Utara, Sleman, Yogyakarta 55281<\/p>\n

ID 400 Improving the Fabrication and Welding Workshop at Kuwait Oil Company for Better Worker Performance by Using Digital Human Modeling and Simulation<\/strong><\/a>
\nFatemah AlKhozam, Hebah AlEnezi, Muneerah AlMetlaqem, Rahaf AlAjmi, Shareefah Haji, Kareem Abbady, and Suat Kasap, Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East \u2013 AUM, Egaila, Kuwait<\/p>\n

ID 401 Developing a Mobile Application for Safety Engineers for Detailed Hazard Analysis<\/strong><\/a>
\nFay AlDallal, Nojoud AlMutairi, Mastourah AlRasheedi, Munerah AlShadad, Sarah AlShadad, and Suat Kasap, Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East \u2013 AUM, Egaila, Kuwait<\/p>\n

ID 402 Food Waste in Supply Chains: A Literature Review<\/strong><\/a>
\nAtikha Sidhi Cahyana, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
\nDepartment of Industrial Engineering, Universitas Muhammadiyah Sidoarjo, Sidoarjo, Indonesia
\nIwan Vanany and Niniet Indah Arvitrida, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia<\/p>\n

ID 403 A Technology Foresight Perspective on Household Waste Management Practices<\/strong><\/a>
\nEta Wahab, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Johor, Malaysia
\nZaurin Ali, Centre For Diploma Studies Department, Universiti Tun Hussein Onn Malaysia, Johor, Malaysia<\/p>\n

ID 404 Service Quality to E-Service Quality: A Paradigm Shift<\/strong><\/a>
\nSadaf Firdous and Rahela Farooqi, Centre for Management Studies, Jamia Millia Islamia, 110025, New Delhi, India<\/p>\n

ID 405 Blood Supply Chain Challenges: Evidence from Indonesia<\/strong><\/a>
\nAgus Mansur, Iwan Vanany and Niniet Indah Arvitrida, Industrial Engineering Department, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia<\/p>\n

ID 406 Few Refinements to Capacitated Plant Location Problem<\/strong><\/a>
\nR.R.K. Sharma, Ajay Jha and Himanshu Rahangdale, Department of Industrial and Management Engineering, IIT Kanpur 208016, India<\/p>\n

ID 407 Renewable Energy Management: Technical and Economic Evaluation of an Optimized Photovoltaic System<\/strong><\/a>
\nHamed Allaham, Industrial Engineering and Engineering Management Department, College of Engineering, University of Sharjah, Sharjah, UAE
\nAbdul Kadir Hamid, Electrical and Computer Engineering Department College of Engineering, University of Sharjah, Sharjah, UAE
\nAli Cheaitou, Sustainable Engineering Asset Management (SEAM) Research Group and Industrial Engineering and Engineering Management Department, College of Engineering, University of Sharjah, Sharjah, UAE<\/p>\n

ID 408 Design Optimization of Equipment Controls Setup and Workstation Tables for the Remote Production Taping of a Media Broadcasting Company<\/strong><\/a>
\nArriane A. Palisoc, Gerald O. Semifrania, Ma. Teodora E. Gutierrez, Yoshiki B. Kurata and Maricar M. Navarro, Department of Industrial Engineering, Technological Institute of the Philippines Quezon City, Philippines<\/p>\n

ID 409 Few Refinements to Simple Plant Location Problem<\/strong><\/a>
\nR.R.K. Sharma, Ajay Jha and Urvashi Sharma, Department of Industrial and Management Engineering, IIT Kanpur 208016, India<\/p>\n

ID 410 Development Of Internal Quality Assurance System Iso 9001: 2008 Based On Iwa 2: 2007 Using Web-Based Document Management Control (DMC) Applications<\/strong><\/a>
\nHermien Tridayanti, Bayu Airlangga Putra, Sengguruh Nilowardono, Economic and Business Faculty, Narotama University, Surabaya, East Java, Indonesia<\/p>\n

ID 411 Optimization of Biogas Production from sewage sludge<\/strong><\/a>
\nMohamed Belaid, Anthony Njuguna Matheri, Itumeleng Constance Lelosa, Edison Muzenda and Ishmael Ramatsa, Department of Chemical Engineering Technology, Faculty of Engineering and the Built Environment, University of Johannesburg, Doornfontein, Johannesburg, South Africa<\/p>\n

ID 412 Biochemical Methane Potential Analysis using Cow dung, Chicken manure and Pig manure under Mesophilic Conditions<\/strong><\/a>
\nMohamed Belaid, Anthony Njuguna Matheri, Nomkhosi Princess Mdluli and Edison Muzenda, Department of Chemical Engineering Technology, Faculty of Engineering and the Built Environment, University of Johannesburg, Doornfontein, Johannesburg, South Africa<\/p>\n

ID 413 Increasing Productivity in Garments Manufacturing through Time Standardization and Work Measurement<\/strong><\/a>
\nValerie Peralta, Jerran Del Mundo, Juan Miguel Dinglasan, Patrick James Palma, Bert, Regin Santiago, and Cohesir Sims, Department of Industrial Engineering, Technological Institute of the Philippines, Quezon City, Philippines<\/p>\n

ID 414 Statistical Analysis in Measuring Employee Performance at Department Store<\/strong><\/a>
\nAhmad Syarif Hidayaulloh, Agus Sukoco, Elok Damayanti, Arasy Alimudin, M. Ikhsan Setiawan and Sriwiwoho Mudjanarko, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
\nDani Hermanto, Faculty of engineering and technology, University of Derby, UK
\nAbdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia<\/p>\n

ID 415 Analysis of the Efficiency of Company’s Strategy by Dismissing Employees and Replacing Them with the Home Industry<\/strong><\/a>
\nArasy Alimudin, Agus Sukoco, Elok Damayanti, Rony Wardhana and Ibnu Farid, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
\nDani Hermanto, Faculty of engineering and technology, University of Derby, UK
\nAbdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia<\/p>\n

ID 416 Do E-Satisfaction And E-Trust Affect Online Repurchase Intention?<\/a><\/strong>
\nAde Woroko, Santirianingrum Soebandhi, Avi Sunani, Hermin Tridayanti, Sengguruh Nilowardhono and Ronny Wardhana, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
\nAgus Sukoco, Faculty of engineering and technology, University of Derby, UK
\nDani Hermanto and Abdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia<\/p>\n

ID 417 The effects of chromosome length on hyper-heuristics for solving the maritime inventory routing problems<\/strong><\/a>
\nNurhadi Siswanto, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, 60111, Indonesia<\/p>\n

ID 418 Seal Slurry Analysis Based On Asbuton Addition and Cement Filler Variation<\/strong><\/a>
\nIvandy Rahmadianto Madya, Sri Wiwoho Mudjanarko, Wahyu Mulyo Utomo and Ronny Dorotun, Departement of Civil Engineering, Narotama University, Surabaya, 60117, Indonesia
\nAgus Sukoco, Management Business, Narotama University, Surabaya, 60117, Indonesia
\nArthur Daniel Limantara, Departement of Civil Engineering, State University of Surabaya, Surabaya, Indonesia
\nFirdaus Pratama Wiwoho, Departement of Civil Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, 60117, Indonesia
\nAbdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia<\/p>\n

ID 419 Utilitarian and Hedonic Motivations: Its Influences on Search and Purchase Intention in Instagram<\/strong><\/a>
\nRandy Angga Kusuma, Santirianingrum Soebandhi, Hamzah Denny Subagyo and Agus Sukoco, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
\nDani Hermanto, Faculty of engineering and technology, University of Derby, UK
\nAbdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia<\/p>\n

ID 420 Indonesia Airport, Passanger and Aircraft impact on Regional Budget (APBD)<\/strong><\/a>
\nMuhammad Ikhsan Setiawan, Sri Wiwoho Mudjanarko and Ronny Durrotun Nasihien, Department of Civil Engineering, Narotama University, Surabaya, Indonesia
\nAgus Sukoco and Joko Suyono, Department of Management, Narotama University, Surabaya, Indonesia
\nDani Hermanto, Faculty of Engineering and Technology, University of Derby, UK
\nAbdul Talib Bin Bon, Mohd Haziman Wan Ibrahim, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia<\/p>\n

ID 421 Plastic Waste of Low Density Polyethlene (Ldpe) Types in Asphalt Mixture<\/strong><\/a>
\nZulfawardi, Koespiadi, Sri Wiwoho Mudjanarko and M. Ikhsan Setiawan, Departement of Civil Engineering, Narotama University, Surabaya, 60117, Indonesia
\nAgus Sukoco, Management Business, Narotama University, Surabaya, 60117, Indonesia
\nDadang Supriyatno, Departement of Civil Engineering, State University of Surabaya, Surabaya, Indonesia
\nFirdaus Pratama Wiwoho, Departement of Civil Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, 60117, Indonesia
\nAbdul Thalib bin Bun, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia<\/p>\n

ID 422 Phenomenological Study of ERP-Based PDT Implementation in Enhancing Firm Performance<\/strong><\/a>
\nAvi Sunani and Rony Wardhana, Narotama University, Surabaya, East Java, Indonesia<\/p>\n

ID 423 The Behavior and Entrepreneurial Intentions of the Millennia Generation of Indonesia, Studies in Surabaya City Students<\/strong><\/a>
\nAgus Sukoco, M. Ikhsan Setiawan, Sriwiwoho Mudjanarko, Arasy Alimudin and Iswachyu Dhaniarti, Faculty Economy and Business, Narotama University Surabaya Indonesia
\nHening Widi Oetomo and Achmad Ridwan, Faculty Economy and Business, SIESIA Surabaya Indonesia
\nDani Harmanto, Faculty of engineering and technology, University of Derby, UK
\nTalib bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia<\/p>\n

ID 424 Airport, Passenger and Aircraft supporting to Regional Growth<\/strong><\/a>
\nMuhammad Ikhsan Setiawan, Department of Civil Engineering, Narotama University, Surabaya, Indonesia
\nAgus Sukoco, Department of Management, Narotama University, Surabaya, Indonesia
\nPaisal Halim, Institut Ilmu Sosial dan Manajemen STIAMI, Jakarta, Indonesia
\nDani Hermanto, Faculty of Engineering and Technology, University of Derby, UK
\nAbdul Talib Bin Bon, Mohd Haziman Wan Ibrahim, Mohd Adib Mohammad Razi, Norzila Binti Othman, Mohd Irwan Bin Juki, Ahmad Zurisman Bin Mohd Ali and Wahyu Mulyo Utomo, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia<\/p>\n

ID 425 Business Analytics Maturity Models: A Systematic Review of Literature<\/strong><\/a>
\nKaveesha Ariyarathna and Suren Peter, Department of Industrial Management, University of Kelaniya, Sri Lanka<\/p>\n

ID 426 Work-related Factors affecting the Sustained Attention among Production Workers in a Pharmaceutical Company in the Philippines<\/strong><\/a>
\nCharlene Cariaga, Alyza Marie D. Tolentino, August Adrian A. Castor, Khenn S. Arista, John Nathanoj A. Basilio and Yoshiki B. Kurata, Department of Industrial Engineering, Technological Institute of the Philippines, Quezon City, Philippines<\/p>\n

ID 427 Impact of variation orders occurrence in construction: A case study of Polokwane, Limpopo Province<\/strong><\/a>
\nPfumelani Malulekea, Clinton Aigbavboab and Wellington Thwalac, Department of construction management and Quantity surveying, University of Johannesburg, Johannesburg, South Africa<\/p>\n

ID 428 The Paths From Service Quality Dimensions To Customer Loyalty: An Application On Sri Lankan Supermarket Customers<\/strong><\/a>
\nM. T. Dimantha Jayasanka and L. H. T. De. S. Wickramasuriya, Department of Decision Sciences, University of Sri Jayawardenepura, Gangodawila, Nugegoda, Sri Lanka<\/p>\n

ID 429 Feasibility Study On Proposed Micro Hydro Electrical Powerplant\u00a0<\/strong><\/a>
\nDr. Palakshappa K,\u00a0PACE, Department of Civil Engineering,\u00a0Visvesvaraya Technological University,\u00a0Mangalore, 574153, INDIA
\nMr. Rudresha N, PACE, Department of Mechanical Engineering, Visvesvaraya Technological University, Mangalore, 574153, India
\nDr. Vijay Kumar M, JSSATE, Department of Industrial Engineering & Management, Visvesvaraya Technological University, Bangalore, 560060, India<\/p>\n

ID 437 Continuous Improvement to Create Value: Warehouse Management in a Telecommunications Company<\/strong><\/a>
\nJos\u00e9 Vasconcelos Ferreira and Ana Lu\u00edsa Ramos, GOVCOPP\/Department of Economics, Management, Industrial Engineering and Tourism, University of Aveiro, Aveiro, Portugal
\nAdriana Ferreira Esteves, Department of Economics, Management, Industrial Engineering and Tourism, University of Aveiro, Aveiro, Portugal<\/p>\n

ID 438 AMBHigh: A User Ergonomic Mobile Learning Application Intended for Business Management Secondary Students in the Philippines<\/strong><\/a>
\nValerie B. Peralta, Jerran Del R. Mundo, Patrick James M. Palma, Bert Regin S. Santiago, Cohesir V. Sims, Francis I. Sulit and Yoshiki B. Kurata, Industrial Engineering Department, Technological Institute of the Philippines \u2013 Quezon City, Quezon City, Philippines<\/p>\n

ID 439 A Critical review about performance management in education systems: Case of Morocco<\/strong><\/a>
\nHind Benlhabib and Abdelaziz Berrado, Equipe AMIPS, Ecole Mohammadia d\u2019Ing\u00e9nieurs, Mohammed V University of Rabat, Morocco<\/p>\n

ID 440 Solar Powered Plane<\/strong><\/a>
\nSyed Sharjeel Imam, Sapienza University of Rome, Rome, Italy
\nMohammad Sadiq Saeed, Department of Civil Engineering, ZHCET, Aligarh Muslim University, Aligarh, India
\nMohammad Asim, Department of Electrical Engineering, Integral University, Lucknow, India<\/p>\n

ID 441 Techno-Commercial and Feasibility Analysis of Energy Efficient Solar Powered Technologies for Indian Scenarios<\/strong><\/a>
\nGaneshan Subramanian & Aimen Sudhir, Production Engineering Department, Veermata Jijabai Technological Institute, Matunga, Mumbai 400019, India
\nMandar Tendolkar, Mechanical Engineering Department, Veermata Jijabai Technological Institute, Matunga, Mumbai 400019, India<\/p>\n

ID 442 A strategic relationship building through procurement 4.0: An analysis from the apparel industry<\/strong><\/a>
\nP. M. D. Rasanjani, W. W. N. Sachini, G. A. S. Sandamali and W. M. S. K. Weerabahu, Department of Industrial Management, Faculty of Science, University of Kelaniya, SriLanka<\/p>\n

ID 446 Approaches to Catering to Variability in Demand Fulfillment in a First Mile Logistics Network<\/strong><\/a>
\nSanchita Das, Amit Gahlawat and Sarvartha Kanchan<\/p>\n

ID 447 Evaluation of Fertilization Storage System Considering Seasonal Demand using Discrete Event Simulation<\/strong><\/a>
\nNurhadi Siswanto, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, 60111, Indonesia<\/p>\n

ID 448 Investigating curriculum transformation pathways in technological planning schools: Learning from conventional planning programmes and beyond<\/strong><\/a>
\nTrynos Gumbo, University of Johannesburg, Department of Town and Regional planning, Office 6062, Sixth Floor, John Orr Building, Beit and Siemert Street, 2028. Johannesburg, South Africa
\nBrightnes Risimati, University of Johannesburg, Department of Quality and Operations Management, Auckland Park Bunting Road Campus, Johannesburg, South Africa
\nEmaculate Ingwani, University of Venda, Department of Urban and Regional Planning, Thohoyandou, 0950, Thohoyandou, South Africa<\/p>\n

ID 449\u00a0Exploring the efficacy of blended learning and innovative assessments in town planning students at the University of Johannesburg<\/a>
\n<\/strong>Trynos Gumbo,\u00a0University of Johannesburg, Department of Town and Regional planning, Johannesburg, South Africa
\nSiphiwe Given Mbatha,\u00a0University of Johannesburg, Department of Quality and Operations Management
\nAuckland Park Bunting Road Campus, Johannesburg, South Africa
\nEmaculate Ingwani,\u00a0University of Venda, Department of Urban and Regional Planning
\nThohoyandou, South Africa<\/p>\n

ID 450 A Managerial Challenge: Selecting an appropriate model for implementing the Corrosion Management System, Case Study: National Iranian Gas Company<\/strong><\/a>
\nAli Massaeli, Corrosion Management System Project Manager, Technical Inspection and Control Department, National Iranian Gas Company, Tehran, Iran
\nReza Mesgarian, Head of Process Engineering, Coordination and Production Monitoring Department, National Iranian Gas Company, Tehran, Iran<\/p>\n

ID 451 Re-Designing a Gear Using Reverse Engineering<\/strong><\/a>
\nHoor Alhafeiti, Aiman Ziout, Athari Alsaadiya & Asma Alhebsi, Department of Mechanical Engineering, United Arab Emirates University, Alain, UAE<\/p>\n

ID 452 Municipal solid waste collection and disposal using traveling salesman problem: A Review<\/strong><\/a>
\nEzugwu Loveth Anaezi and Stephen C. Nwanya, Department of Mechanical Engineering, University of Nigeria Nsukka, Nigeria
\nPaul A. Ozor, Department of Quality and Operations Management, University of Johannesburg, South Africa
\nDepartment of Mechanical Engineering, University of Nigeria Nsukka, Nigeria<\/p>\n

ID 453 Developing a Planning Model for Supplying First Aid Medicine after Cyclone in Southwest Coastal Areas of Bangladesh<\/strong><\/a>
\nTamanna Islam and Salim Hossain, Department of Industrial and Production Engineering, Khulna University of Engineering & Technology, Dhaka, Bangladesh<\/p>\n

ID 454 Multi-objective Optimization of Dynamic Electricity Generation-mix with CO2 Reduction Target: A Case Study of South Africa<\/strong><\/a>
\nZakaria Yahia and Pule Kholopane, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa<\/p>\n

ID 455 Multi-objective Preemptive Optimization of Residential Load Scheduling Problem Under Price and CO2 Signals<\/strong><\/a>
\nZakaria Yahia and Anup Pradhan, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, Soutsh Africa<\/p>\n

ID 456 TAKA News Search Engine: A Proposed DEMO-based Performance Evaluation System<\/strong><\/a>
\nTarek Fatyani, R&D Department, SMAGROUP LLC, Chiba, Japan
\nZakaria Yahia, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa<\/p>\n

ID 457 A Study of Workforce Assignment Problem in Lean Factory on Machine Tool Industry<\/strong><\/a>
\nJrJung Lyu, Ching-Hsiang Tung, and Chia-Wen Chen, Department of Industrial and Information Management, National Cheng Kung University, Tainan, Taiwan<\/p>\n

ID 458 Work Organization through Methods Engineering and Time Study to Increase Productivity in a Floriculture Company: A Case Study<\/strong><\/a>
\nCarlos A. Machado Orges, Leandro L. Lorente Leyva and Juan C. Mugmal Iles, Facultad de Ingenier\u00eda en Ciencias Aplicadas, Universidad T\u00e9cnica del Norte, Ibarra, Ecuador
\nJuan P. Tafur Guisao, Escuela de Ciencias Qu\u00edmicas e Ingenier\u00eda, Universidad Yachay Tech, Urcuqu\u00ed, Ecuador
\nIvet Challenger P\u00e9rez, Facultad de Ingenier\u00eda Inform\u00e1tica y Matem\u00e1tica, Universidad de Holgu\u00edn, Cuba<\/p>\n

ID 459 On Applying Big Data to Transform the Inspection Lines<\/strong><\/a>
\nJrJung Lyu, Chia-Wen Chen, and Hong Yu Chen, Department of Industrial and Information Management, National Cheng Kung University, Tainan, Taiwan (R.O.C.)<\/p>\n

ID 464 Reducing Screen Printing Lead Time: A Quality Control Circle Approach<\/strong><\/a>
\nMd. Mamunur Rashid and Sharif Ahmed, Department of Industrial & Production Engineering, Department of Yarn Engineering, Bangladesh University of Textiles, Dhaka-1208, Bangladesh<\/p>\n

ID 465 Academic \u2013 Industry Partnership to Develop Tomorrow\u2019s Engineering Innovators<\/strong><\/a>
\nCarol S. Gattis, Ph.D., Associate Dean Emeritus, Honors College, Adjunct Associate Professor, Industrial Engineering, University of Arkansas, Fayetteville, AR 72701, USA
\nKarl D. Schubert, Ph.D., FIET, Research Professor, College of Engineering, Director of Research for Innovation and Data Science Initiatives for the College of Engineering and the Sam M. Walton College of Business, University of Arkansas, Fayetteville, AR 72701
\nMichele Cleary, Evaluation and Reporting Consultant, Cleary Scientific Intelligence, LLC, Minneapolis, MN 55410<\/p>\n

ID 466 Development of Post-Consumer Polymer Suppliers<\/strong><\/a>
\nAndr\u00e9s R. Cruz Herrera, Jeanette del P. Ure\u00f1a Aguirre and Leandro L. Lorente Leyva, Facultad de Ingenier\u00eda en Ciencias Aplicadas, Universidad T\u00e9cnica del Norte, Ibarra, Ecuador<\/p>\n

ID 467 Optimal Control Applied to an Economic Model for Reducing Unemployment Problems in Bangladesh<\/strong><\/a>
\nMd. Haider Ali Biswas, Uzzwal Kumar Mallick, Mst. Shanta Khatun, Mathematics Discipline, Khulna University, Khulna-9208, Bangladesh
\nKazi Masum Parves, Joint Director, Bangladesh Bank, Khulna, Bangladesh<\/p>\n

ID 468 Implementation of Green Supply Chain Management (Gscm) Practices among Malaysian Smes<\/strong><\/a>
\nAlina Shamsuddin and Eta Wahab, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor, Malaysia<\/p>\n

ID 469 An Interactive Analytic Hierarchy Process for Product Recommendation: A Case Study in Studio Recording<\/strong><\/a>
\nSudatip Puengrusme, Stamford International University, Bangkok 10110, Thailand
\nUdom Janjarassuk, Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang, Bangkok 10520, Thailand<\/p>\n

ID 470 Effects of Working Environment and Stress on Sick Building Syndrome among Manufacturing Employees<\/strong><\/a>
\nNor Hazana Abdullah, Eta Wahab, Alina Shamsuddin and Nor Aziati Abdul Hamid, Faculty of Technology Management, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor 86400 MALAYSIA<\/p>\n

ID 471 A Strategic Model to Improve the Last mile delivery performance in Ecommerce Parcel Delivery<\/strong><\/a>
\nGayani Bopage, Julian Nanayakkara and Kasuni Vidanagamachchi, Department of Industrial Management, Faculty of Science, University of Kelaniya, Sri Lanka<\/p>\n

ID 472 Modeling and Assessment of Carbon Dioxide Concentration Emitted from the Coal-based Power Plant in Bangladesh<\/strong><\/a>
\nArindam Kumar Paul and M. Haider Ali Biswas, Mathematics Discipline, Khulna University, Khulna-9208, Bangladesh<\/p>\n

ID 473 Analysis Of Designing Job Shop Scheduling In Pt. Harmony Of Four Selaras With Tabu Search Algorithm Method To Minimize Production Makespan<\/strong><\/a>
\nLina Gozali, Lilyana Jap, Meisya Anggriani Halim, Industrial Engineering Department, Faculty of Engineering, Universitas Tarumanagara, Jakarta, 11440, Indonesia<\/p>\n

ID 475 Influence of the type of Pipeline Integrity Assessment on the effectiveness of repairs<\/strong><\/a>
\nBenmounah Amar, Department of Transport and Equipment of Hydrocarbons, University Mhamed Bougara Boumerdas 35000. Algeria<\/p>\n

ID 476 Applications of Nanoparticles via Laser Ablation in Liquids: a review<\/strong><\/a>
\nFawaz M. Abdullah, Abdulrahman M. Al-Ahmari, and Saied Darwish, Industrial Engineering Department, King Saud University, Riyadh, 11421, KSA
\nMadiha Rafaqat, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, Pakistan<\/p>\n

ID 477 Recycling Enhancement Efforts Using Mobile Application: Novel Approach in Penang, Malaysia<\/strong><\/a>
\nPrashanth Beleya, Geetha Veerappan, Tan Zheyan and Poh Chia Ming, Universiti Tunku Abdul Rahman, Malaysia<\/p>\n

ID 478 Performance Evaluation of Integrated Moisture Sensor with ZigBee Mesh Network for Automated Irrigation System<\/strong><\/a>
\nChe Zalina Zulkifli, Nursyahida Mohd Noor and Nur Hazlina Abu Hassan, Computing Department, Sultan Idris Education University, Perak, Malaysia<\/p>\n

ID 479 Factors Influencing Knowledge Transfer activities in Enterprise Resource Planning Success for Food Manufacturing<\/strong><\/a>
\nNur Izzah Muallah, A.H. Nor Aziati, T. Rosmaini, A. Nor Hazana and S.W. Chan, Faculty of Technology Management & Business, University of Tun Hussein Onn Malaysia, 86400, Parit Raja, Johor, Malaysia<\/p>\n

ID 480 Incorporating Dynamic Potential market in Innovation Diffusion Model Using Stochastic Differential Equation<\/strong><\/a>
\nKuldeep Chaudhary and Pradeep Kumar, Department of Applied Mathematics, Amity Institute of Applied Sciences, Amity University, Noida, 201301, India
\nSunita Mehta, Department of Mathematics, Kalindi College, University of Delhi, India<\/p>\n

ID 487 Innovative Undergraduate Degree Programs in Data Science and Business Analytics<\/strong><\/a>
\nShahram Taj, Florida Polytechnic University, Lakeland, Florida, United States<\/p>\n

ID 488 The Design Of Hybrid Flowshop Scheduling System With Nawaz Enscore Ham (Neh) And Campbell Dudek Smith (Cds) Algorithm To Minimize Makespan In Pt. Plasindo Elok<\/strong><\/a>
\nLiesly Liesly, Lina Gozali, and Lilyana, Department of Industrial Engineering, Tarumanagara University, Jakarta, Indonesia<\/p>\n

ID 489 State of Model Risk: A Comprehensive Review of Model Validation and Model Risk Management Approaches in the Age of Machine<\/strong><\/a>
\nMurphy Choy, Edinburgh Business School, Heriot Watt University
\nMa Nang Laik, School of Business, Singapore University of Social Science, Singapore<\/p>\n

ID 490 Stochastic Analysis of a Three Unit Series Parallel System<\/strong><\/a>
\nVenkata S S Yadavalli, Department of Industrial & Systems Engineering, University of Pretoria, Pretoria, South Africa<\/p>\n

ID 491 Sustainable Construction through the Application of Lean Principles<\/strong><\/a>
\nMary Yrene B. Paguio, ChE, OD, MS Industrial Engineering & Management Student, PUP, Philippines<\/p>\n

ID 492 Sustainable Model Impact of Reclamation in Coastal North Jakarta (Case Study: A Fishing Village in Kamal Muara, Penjaringan)<\/strong><\/a>
\nLilyana, Naufal Sanca L, Lina Gozali, Teuku Yuri M Zagloel and Tri Edhi Budhi Soesilo, Tarumanagara University, Jakarta, Indonesia<\/p>\n

ID 493 Value-at-Risk and Modofied Value-at-Risk under Asset Liability by Using Time Series Approach<\/strong><\/a>
\nSukono, Betty Subartini and Herlina Napitupulu, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nYuyun Hidayat, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nAdam Sukma Putra, Department of Physics, Faculty of Mathematics and Natural Sciences, Universitas Gajah Mada, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 494 Reinsurance Loss Model at Individual Risk for Short Term in Life Insurance<\/strong><\/a>
\nSukono, Endang Soeryana Hasbullah and Alit Kartiwa, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nYuyun Hidayat, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nSubiyanto, Department of Marine Science, Faculty of Fishery and Marine Science, Universitas Padjadjaran, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 495 A New 3-D Chaotic System with Three Nonlinearities, its Adaptive Synchronization and Circuit Simulation<\/strong><\/a>
\nAceng Sambas, Department of Mechanical Engineering, Universitas Muhammadiyah Tasikmalaya, Tasikmalaya, Indonesia
\nSundarapandian Vaidyanathan, Research and Development Centre, Vel Tech University, Chennai, Tamil Nadu, India
\nSukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nSubiyanto, Department of Marine Science, Universitas Padjadjaran, Indonesia
\nMustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Kuala Terengganu, Malaysia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 496 A New 4-D Hyperchaotic System with a Two-Scroll Attractor, its Adaptive Control and Circuit Simulation<\/strong><\/a>
\nSukono F, Department of Mathemetics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran Bandung Jawa Barat, Indonesia<\/p>\n

ID 497 Numerical Simulation of Finite Difference Time Domain (FDTD) for Solving the Boundary Value Problem (BVP) in Earth Layer<\/strong><\/a>
\nAdam Sukma Putra, Idham Syah Alam, Department of Physics, Faculty of Mathematics and Natural Sciences, Universitas Gajah Mada, Indonesia
\nSukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nWahyu Srigutomo, Department of Physics, Faculty of Mathematics and Natural Sciences, Bandung Institute of Technology, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 498 The Application of Floyd-Warshall Algorithm in Solving Shortest Path Problem for Fire Evacuation System at High Rise Building (Case Study at eL Royale Hotel Bandung)<\/strong><\/a>
\nSukono F, Department of Mathemetics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran Bandung Jawa Barat, Indonesia<\/p>\n

ID 499 Regional Lagging Analysis in Indonesia Using Binary Logistic Regression<\/strong><\/a>
\nTiti Purwandari and Yuyun Hidayat, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nSukono and Herlina Napitupulu, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 500 Profile of West Java Province Based on School Participation Rate Using Biplot\u2019s Principal Component Analysis<\/strong><\/a>
\nTiti Purwandari and Yuyun Hidayat, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nSukono and Herlina Napitupulu, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 501 Identification of Countries that Have Similarities with Indonesia in the Context of Rice Crisis Using Multidimensional Scaling<\/strong><\/a>
\nTiti Purwandari and Yuyun Hidayat, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nSukono and Herlina Napitupulu, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 502 Grouping of Regencies and Cities in West Java Using the Biplot\u2019s Principal Component Analysis<\/strong><\/a>
\nYuyun Hidayat and Titi Purwandari, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nSukono and Herlina Napitupulu, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 503 Listing all potential maximal cliques of a graph<\/strong><\/a>
\nMochamad Suyudi and Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nMustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Tembila Campus, 2200 Besut, Terengganu, Malaysia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Johor, Malaysia<\/p>\n

ID 504 Eigenvalues and the max-cut problem<\/strong><\/a>
\nMochamad Suyudi and Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nMustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Tembila Campus, 2200 Besut, Terengganu, Malaysia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Johor, Malaysia<\/p>\n

ID 507 New Ordering Approach Specific Airline Industry<\/strong><\/a>
\nRedemtor V. Cari\u00f1o, Master of Science in Industrial Engineering Management, Polytechnic University of the Philippines<\/p>\n

ID 508 The Identification of Material Management Risk Factors Affecting to The Time Performance in Fly Over Project Construction<\/strong><\/a>
\nHafnidar A. Rani and Tamalkhani Syammaun, Civil Engineering Department, Faculty of Engineering, Universitas Muhammadiyah Aceh, Banda Aceh, Aceh, Indonesia<\/p>\n

ID 509 Problems of demand and effects in portfolio based selection of utility functions<\/strong><\/a>
\nRiaman, Sukono and Eman Lesmana, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 513 Successful Implementation of Separate Layer Steam Injection to Enhance Oil Production from Comingle Layers- FNE-28 Case Study<\/strong><\/a>
\nHusham A. Ali Elbaloula Petro-Energy E&P, Dr. Tagwa A. Musa \u2013Sudan University of Science & Technology, Luo Shengyong – GWDC<\/p>\n

ID 514 Comparing Products and (Medical) Services on Few Organizational Variables: A Theoretical Framework<\/strong><\/a>
\nDr. Sheela R Sharma, Rama Medical College, Mandhana, Kanpur, India
\nProf. RRK Sharma and Ajay Jha, Dept of IME, IIT Kanpur, Kanpur, India<\/p>\n

ID 515 Management Control Systems (MCS) in Hospitals<\/strong><\/a>
\nDr. Sheela R Sharma, Rama Medical College, Mandhana, Kanpur, India
\nProf. RRK Sharma and Ajay Jha, Dept of IME, IIT Kanpur, Kanpur, India<\/p>\n

ID 516 ERP For Service Sector And Medical Service<\/strong><\/a>
\nDr. Sheela R Sharma, Rama Medical College, Mandhana, Kanpur, India
\nAjay Jha and Prof. RRK Sharma, Dept of IME, IIT Kanpur, Kanpur, India<\/p>\n

ID 517 Multi Agent System For Hospitals<\/strong><\/a>
\nDr. Sheela R Sharma, Rama Medical College, Mandhana, Kanpur, India
\nAjay Jha and Prof. RRK Sharma, Dept of IME, IIT Kanpur, Kanpur, India<\/p>\n

ID 518 Literature review of Dynamic Vehicle Routing Problem and future perspectives<\/strong><\/a>
\nKaadiri Yahia and Omar Drissi Kaitouni, Engineering, Management and Systems\u2019 optimization Laboratory, Mohammadia School of Engineers, Avenue Ibn Sina B.P 765, Agdal -Rabat<\/p>\n

ID 521 Data Screening Technique for Developing a Crude Oil Price Forecasting Models for Petroleum Industry<\/strong><\/a>
\nAbdul Talib Bon and Nuhu Isah, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Parit Raja, Batu Pahat, Malaysia<\/p>\n

ID 522 ASEAN 2025 and KM Approach to Improve Business Lawyer Competency: A Case Study of Chiang Mai University<\/strong><\/a>
\nChayamarnie Bhiriyawanit, Worawit Janchai, Pitipong Yodmongkol and Anurak Panyanuwat, College of Arts, Media, and Technology, Chiang Mai University, Muang, Chiang Mai, 50200, Thailand<\/p>\n

ID 523 Strategy for Developing MSMEs Performance Using Balanced Scorecard Model Measurement Based on Information Technology<\/strong><\/a>
\nAchmad Zakki Falani, Department of Informatic Engineering, Narotama University, Surabaya, East Java, Indonesia
\nArasy Alimudin and Elok Damayanti, Department of Management, Narotama University, Surabaya, East Java, Indonesia
\nAbdul Talib Bon, Department of Production and Operation Management, Universiti Tun Hussein Onn, Parit Raja, Johor, Malaysia<\/p>\n

ID 524 Optimal Investment Timing and Liquidity<\/strong><\/a>
\nMichi Nishihara, Graduate School of Economics, Osaka University, Osaka, Japan<\/p>\n

ID 525 Controlling Schedule of Fiber to the Home (FTTH) Project Using Critical Path and Crashing Method<\/strong><\/a>
\nCatur Fajri Augyhana, Ika Arum Puspita and Wawan Tripiawan, Industrial Engineering, Industrial and System Engineering Faculty, Telkom University, Bandung, 40257, ID<\/p>\n

ID 526 A Principal Criteria Searching Approach Based Leanness Assessment Method Considering Industrial Diversity<\/strong><\/a>
\nGeng Cui, Fei Xie and Cunrong Li, Department of Industrial Engineering, School of Mechanical and Electronics Engineering, Wuhan University of Technology<\/p>\n

ID 527 Organizational Readiness to Change in Research Institute Case Studies<\/strong><\/a>
\nMia Rahma Romadona, Research Center for Development of Science and Technology, Indonesian Institute of Sciences, Jakarta, Indonesia<\/p>\n

ID 530 A New Metaheuristics for Solving Traveling Salesman Problem: Partial Comparison Optimization<\/strong><\/a>
\nAntono Adhi, Industrial Engineering Department, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia,
\nIndustrial Engineering Department, Universitas Stikubank, Semarang, Indonesia
\nBudi Santosa and Nurhadi Siswanto, Industrial Engineering Department, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia<\/p>\n

ID 531 A Strategic Model to Improve the Last Mile Delivery Performance in E-commerce Parcel Delivery<\/strong><\/a>
\nGayani Bopage, Julian Nanayakkara and Kasuni Vidanagamachchi, Department of Industrial Management, Faculty of Science, University of Kelaniya, Sri Lanka<\/p>\n

ID 533 Application of ECRS Technique to Reduce Waste in Case of Detergent Packaging Process<\/strong><\/a>
\nNoppadol Sriputtha, Production Engineering Program, Faculty of Engineering, Thai-Nichi Institute of Technology, Bangkok 10250, Thailand Jittanan Kositwat, Production Staff, Production Department, Lion Corporation (Thailand) Limited, Chonburi, Thailand<\/p>\n

ID 534 Role of IOT and Big Data Science in Reusable Packaging Logistics Optimization<\/strong><\/a>
\nBryan Jay Capistrano, Polytechnic University of the Philippines, Manila NCR, Philippines<\/p>\n

ID 535 The Completeness of p-Summable Sequences as 2-Normed Spaces<\/strong><\/a>
\nMuhammad Ryan Sanusi, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Bandung, Indonesia
\nShelvi Ekariani and Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Bandung, Indonesia
\nSubiyanto, Department of Marine, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Bandung, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 536 Application of Spatial Weighting Matrix of GSTAR by Using CLARANS Clustering on Farmer Exchange Rates in 32 Provinces in Indonesia<\/strong><\/a>
\nAnnisa Azizah, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nRini Cahyandari and Arief Fatchul Huda, Department of Mathematics, Faculty of Science and Technology, Universitas Islam Negeri Sunan Gunung Djati Bandung, Indonesia
\nSukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nSubiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 537 Application of Graph Hamilton on Determining the Shortest Route of Trans Metro Bandung<\/strong><\/a>
\nYusuf Ibrahim Abdallah, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nYani Ramdani and Yurika Permanasari, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Islam Bandung, Indonesia
\nSukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nSubiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 538 The LASSO (Least Absolute Shrinkage and Selection Operator) Method to Predict Indonesian Foreign Exchange Deposit Data<\/strong><\/a>
\nTrisha Magdalena Adelheid Januaviani, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran , Bandung, Indonesia
\nNurul Gusriani, Khafsah Joebaedi and Sukono, Department Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Bandung, Indonesia
\nSubiyanto, Department of Marine Science, Faculty of Fishery and Marine Science, Universitas Padjadjaran, Bandung, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 539 Analysis Students Abilities in Completing Mathematical Problems Dimension Three in Junior High School<\/strong><\/a>
\nRahmi Wiganda Elastika, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nZulkarnain, Mefa Indriati and Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nSubiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 540 Developing MSMEs\u2019 Businesses Performance Using Balanced Scorecard Model Measurement Based on Information Technology<\/strong><\/a>
\nAchmad Zakki Falani, Faculty of Informatic Engineering, Narotama University, Surabaya, Indonesia
\nArasy Alimudin, Agus Sukoco and Elok Damayanti, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
\nAbdul Talib Bon, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia<\/p>\n

ID 541 100% Reduction Of Ogp Inspection Waiting Time At Xyz Electronics Corporation Using Monte Carlo Simulation, Heijunka Device And Military 105e Sampling Standard<\/strong><\/a>
\nMary Rose O. Arnejo, Department of Industrial Engineering, Cebu Institute of Technology \u2013 University, Cebu City, Philippines<\/p>\n

ID 542 A Critical Review on the Drivers and Barriers for Enabling Smart Cities<\/strong><\/a>
\nN.S. Jayasena, H. Mallawaarachchi and K.G.A.S. Waidyasekara, Department of Building Economics, University of Moratuwa, Sri Lanka<\/p>\n

ID 543 Strategies to Adopt Zero Waste Concept in the Construction Industry<\/strong><\/a>
\nK.L.A.K.T. Liyanage, K.G.A.S. Waidyasekara and H. Mallawarachchi, Department of Building Economics, Univesity of Moratuwa, Sri Lanka<\/p>\n

ID 544 Performance Evaluation of Sustainable Innovation Practices in Food Supply Chain Using Best-Worst Method<\/strong><\/a>
\nJyoti Darbari, Rashi Sharma and P.C. Jha, Department of Operational Research, University of Delhi, India
\nVenkata Seshachala Sarma Yadavalli, University of Pretoria, South Africa<\/p>\n

ID 545 An Interpretive Structural Model for Analyzing the Impact of Sustainability Driven Supply Chain Strategies<\/strong><\/a>
\nRahul Solanki and P.C. Jha, Department of Operational Research, University of Delhi, India
\nJyoti Darbari, Department of Mathematics, Lady Shri Ram College,\u00a0University of Delhi, India
\nVernika Agarwal,\u00a0Amity International Business School,\u00a0Amiy University, Noida, Uttar Pradesh, India<\/p>\n

ID 546 Waste Plastic Material As An Additional Material For Hollow Foundation Test Concrete<\/strong><\/a>
\nSri Wiwoho Mudjanarko and Prastyo Adi Putro, Departement of Civil Engineering, Universitas Narotama, Surabaya,60117, Indonesia
\nEko Julianto, Politeknik Perkapalan Negeri Surabaya, Surabaya, Indonesia
\nDani Harmanto, Departement of Mechanical Engineering, Derby University, Derby, UK
\nFirdaus Pratama Wiwoho, Departement of Environmental Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, 60117, Indonesia<\/p>\n

ID 547 Development of Food Safety Plan for Food Parks in the Philippines<\/strong><\/a>
\nMadonna F. Andrada, Rolph Fahad Christopher C. Bigtas and Manuel U. Ribo, Jr., School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila<\/p>\n

ID 548 An Ergonomic Design of Birthing Chair for Public Maternity Hospitals in the Philippines<\/strong><\/a>
\nRianina D. Borres and Angeli K. Javier, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila<\/p>\n

ID 549 Ergonomic Design of NLEX Toll Booth in the Philippines<\/strong><\/a>
\nJenalyn Shigella G. Yandug and Marvin L. Cruz, School of Industrial Engineering and Engineering Management, Mapua University, Muralla St., Intramuros, Manila<\/p>\n

ID 550 Prioritization of Service Quality Dimensions towards Customer Retention for Casual-Dining Restaurants<\/strong><\/a>
\nMadylaine G. Delfin, Kenneth G. Tonico and Adrian Allan Barisoro, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila<\/p>\n

ID 551 Predictive Model Affecting the Fatigue Condition of Drivers in the Philippines<\/strong><\/a>
\nRiani\u00f1a D. Borres and Joymie R. Javier, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila<\/p>\n

ID 552 Development of Supply Chain Model for Small Scale FarmerProducers of the Carrageenan Industry in the Philippines<\/strong><\/a>
\nMary Christy O. Mendoza and Raphael Joesh P. Layug, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila<\/p>\n

ID 553 Effects of Internal and External Sources of Distraction to the Driving Performance of Filipino Drivers<\/strong><\/a>
\nRex Aurelius C. Robielos and Ybeth Angelyn P. Tuliao, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila<\/p>\n

ID 554 In-Depth Analysis of Workplace Accidents in Food Processing Company in the Philippines<\/strong><\/a>
\nRex Aurelius C. Robielos, Kenn Redric P. Leyba and Charlene L. Ocampo, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila<\/p>\n

ID 555 Good mechanism for better live<\/strong><\/a>
\nGunawan Gunawan, Surabaya, Indonesia<\/p>\n

ID 556 Analysis Using of Lean Manufacturing to Minimize Waste<\/strong><\/a>
\nNurhayati Sembiring and Muhammad Irvan, Department of Industrial Engineering, Faculty of Engineering, Universitas Sumatera Utara, Sumatera Utara, Indonesia<\/p>\n

ID 557 Cost Reduction in Case of Forklift\u2019s Tire Replacement using VA\/VE Technique<\/strong><\/a>
\nNoppadol Sriputtha, Production Engineering Program, Faculty of Engineering, Thai-Nichi Institute of Technology, Bangkok 10250, Thailand
\nBoonsin Nadondu, Facility and Layout Section, Nissan Trading (Thailand) Co., Ltd., Chonburi, Thailand<\/p>\n

ID 558 Factors Affecting the Performance of Cold Chain for Export of Thailand\u2019s Longan<\/strong><\/a>
\nNarathip Titlo, Graduate program in Logistics Engineering and Supply chain Management, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, Thailand
\nApichart Sopadang, Department of Industrial Engineering, Excellence Center in Logistics and Supply Chain Management, Chiang Mai University, Chiang Mai, Thailand<\/p>\n

ID 559 A Data Analytics Model of Bankability versus Economic Factors: East Java Region Case<\/strong><\/a>
\nHana Aulia Diah Ramadhani and DR.Eng. Erwin Widodo. S.T., M.Eng., Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, 602111, Indonesia<\/p>\n

ID 560 Performance Improvement of Shrimp Feed Raw Materials in Green Supply Chain<\/strong><\/a>
\nJuliza Hidayati, Department of Industrial Engineering, Faculty of Engineering, Universitas Sumatera Utara, Medan, Indonesia
\nSawarni Hasibuan, Master of Industrial Engineering Program, Universitas Mercu Buana, Jakarta, Indonesia<\/p>\n

ID 561 Integration of Contract and Spot Market Carrier under Demand Uncertainty<\/strong><\/a>
\nLala Ayu Kantari, I Nyoman Pujawan and Niniet Indah Arvitrida, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya 60111, Indonesia<\/p>\n

ID 562 Carbon Pricing as a Policy Instrument to Reduce Energy Based Emissions in Apparel Sector<\/strong><\/a>
\nT.L.W. Karunaratne and T.S. Jayawickrama, Department of Building Economics, University of Moratuwa, Sri Lanka<\/p>\n

ID 563 Issues in Implementing Business Process Reengineering (BPR) Projects<\/strong><\/a>
\nM.F.F. Fasna & Sachie Gunatilake, Department of Building Economics, University of Moratuwa, Sri Lanka<\/p>\n

ID 565 An Assessment for the Use of Green Building Information Modelling for Sustainable and Green Buildings \u2013 Sri Lankan Perspective<\/strong><\/a>
\nH.W.T. P. Rathnasiri and H.S. Jayasena, Deparment of Building Economics, University of Moratuwa , Sri Lanka<\/p>\n

ID 566 Service Quality Improvement in Courier Service: Need for Lean Principles<\/strong><\/a>
\nN. Botsane, P.A. Ozor and Charles Mbohwa, Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa<\/p>\n

ID 567 E-Toll Information Technology In Gto And Hybrid In Toll Gate Menanggal \u2013 Surabaya<\/strong><\/a>
\nRachmatdhany Zyandra Aziz, Sri Wiwoho Mudjanarko, Atik Wahyuni and Hendro Sutowijoyo, Departement of Civil Engineering, Universitas Narotama, Surabaya,60117, Indonesia
\nEko Julianto, Politeknik Perkapalan Negeri Surabaya, Surabaya, Indonesia
\nSlamet Winardi and Wahyu Mulyo Utomo, Departement of Computer System, Universitas Narotama, Surabaya,60117, Indonesia
\nDani Harmanto, Departement of Mechanical Engineering, Derby University, Derby, UK<\/p>\n

ID 568 A reverse logistics network optimization model for residual OTR tires from the mining industry: A Colombian case study<\/strong><\/a>
\nJorge Oyola and Ren\u00e9 Amaya-Mier, Department of Industrial Engineering, Universidad del Norte, Barranquilla, Atl\u00e1ntico 081007, Colombia<\/p>\n

ID 569 The Improvement of Technology Utilization in The Framework of the Competitiveness and Sustainability of Indonesia Palm Oil Industry<\/strong><\/a>
\nSawarni Hasibuan, Master of Industrial Engineering Program, Universitas Mercu Buana, West Jakarta 11650, Indonesia
\nJuliza Hidayati, Department of Industrial Engineering, Faculty of Engineering, Universitas Sumatera Utara, Medan, Indonesia<\/p>\n

ID 570 Integration of 360-degree Feedback Methods and AHP for Employee Performance Measurement<\/strong><\/a>
\nMuch. Djunaidi, Virna S.D. Kumaraningrum, Indah Pratiwi, and Hafidh Munawir, Department of Industrial Engineering, Universitas Muhammadiyah Surakarta, Sukoharjo, Central Java, 57162, Indonesia<\/p>\n

ID 571 Conflict Avoidance in Construction Stage through Proper Practice in Pre Contract Stage<\/strong><\/a>
\nKanishka Kajaman, Vijitha Disaratna, Pavithra Ganeshu and Fathima Sabrina Nazeer, Department of Building Economics, University of Moratuwa, Sri Lanka<\/p>\n

ID 572 Mathematical Modeling to Predict the Mechanical Properties of Hot Rolled Steel Sheets<\/strong><\/a>
\nChaovarat Junpradub and Krisada Asawarungsaengkul, Department of Industrial Engineering, Faculty of Engineering, King Mongkut\u2019s University of Technology North Bangkok, Thailand<\/p>\n

ID 573 Combining SWOT and PESTLE Model to Assess Kaskus Business Model<\/strong><\/a>
\nWidhiyaningrum, Abel Kristanto Widodo, Moh. Rizal Tahqiqi, A.A.S. Manik and Mahachandra J.M., Departement of Industrial Engineering, Faculty of Engineering, Diponegoro University<\/p>\n

ID 574 Development Sophistication Degree of New Components of Technometrics Using Concept Mapping<\/strong><\/a>
\nNovi Marlyana, Department of Industrial Engineering, Universitas Islam Sultan Agung, Semarang, Indonesia
\nAlva Edy Tontowi and Hari Agung Yuniarto, Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada, Yogyakarta, Indonesia<\/p>\n

ID 575 The Impact of Green Supply Chain Management Practices on Operational Performance and Customer Satisfaction<\/strong><\/a>
\nH. K. Dilhani Mallikarathna and C. W. Chathurani Silva, Department of Decision Sciences, University of Sri Jayewardenepura, Gangodawila, Nugegoda, Sri Lanka<\/p>\n

ID 576 Ability to Optimizing Shipping Line Operation using Information Technology- A Case Study in Sri Lanka<\/strong><\/a>
\nA.P Preethika Darshani, C.W. Chaturani Silva, Department of Decision Sciences, University of Sri Jayewardenepura, Nugegoda, Sri Lanka<\/p>\n

ID 577 An Equity-based Positioning of Domestic Waste Collection Sites for an Equal Waste-induced Disaster Risk<\/strong><\/a>
\nEko Setiawan, Much Djunaidi, Hafidh Munawir, Alfa Novian Hendranansa Putra, Praditsya Paramitha, Eliza Arrofi Maharani and Bella Brylian, Industrial Engineering Department, Universitas Muhammadiyah Surakarta, Sukoharjo, Central Java, Indonesia<\/p>\n

ID 578 Internet of Things, Big Data and Simulation as a Competitive Advantage in the New Age of Industry 4.0<\/strong><\/a>
\nRafaela Soares dos Santos and Sandro Alberto Vianna Lordelo, Anhanguera University Center, Rio de Janeiro, Brazil<\/p>\n

ID 579 Using Petri Net method for assessing safety barriers performance Case study: Oil and Gas Industry<\/strong><\/a>
\nMouloud Bourareche and Rachid Nait-Said, Institute of Health and Occupational Safety, Laboratory of Research in Industrial Prevention (LRIP), University of Batna, Algeria<\/p>\n

ID 580 Multi-Product Multi-Vehicle Inventory Routing Problem with Mixed Integer Linear Programming<\/strong><\/a>
\nIlyas Masudin, Zaiyin Maghfur and Dian Palupi Restuputri, Industrial Engineering, University of Muhammadiyah Malang, Jawa Timur 65144, Indonesia
\nMudrifah, Accounting, University of Muhammadiyah Malang, Jl. Raya Tlogomas 246 Malang, Jawa Timur 65144, Indonesia
\nFien Zulfikarijah, Management, University of Muhammadiyah Malang, Jl. Raya Tlogomas 246 Malang, Jawa Timur 65144, Indonesia<\/p>\n

ID 581 Design and Development of Advanced Air Purifier Facial Mask<\/strong><\/a>
\nMd. Mamunur Rashid and Sadman Sakib Tushan, Department of Industrial & Production Engineering, Bangladesh University of Textiles, Dhaka-1208, Bangladesh<\/p>\n

ID 582 Digital Human Modeling in Ergonomic Risk Assessment of Working Postures using RULA<\/strong><\/a>
\nM.Manzoor Hussain, Department of Mechanical Engineering, Jawaharlal Nehru Technological University, Hyderabad \u2013 500085, Telangana State, INDIA
\nQutubuddin S.M., Industrial and Production Engineering Department, P.D.A. College of Engineering, Gulbarga, Karnataka State, INDIA<\/p>\n

ID 588 A Knowledge Management Approach to Compare and Develop the ASEAN University Credit Transfer System in Thailand<\/strong><\/a>
\nChayamarnie Bhiriyawanit, Faculty of Law, Chiang Mai Univeristy, Muang, Chiang Mai, 50200, Thailand<\/p>\n

ID 589 Industry 4.0 Gap Analysis for Thai Industries with Association Rules mining<\/strong><\/a>
\nWimalin Laosiritaworn and Wichai Chattinnawat, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, 50200, Thailand<\/p>\n

ID 590 The impact of late payments on the financial performance of a multi-echelon supply chain: a system dynamics modelling approach<\/strong><\/a>
\nAbdelaziz Berradou, Tarik Saikouk and Mohamed Hicham Salah Eddine, University of Rabat, Rabat, Morocco<\/p>\n

ID 591 A Study Of Food Waste Behaviour In Tertiary Institution<\/strong><\/a>
\nEmy Ezura Bt. A. Jalil, Technology and Supply Chain Excellence Institute
\nChong Wing Ying, Chang See Min and Loo Mei Chen, School of Technology Management and Logistics, College of Business, Universiti Utara Malaysia, Sintok, Kedah, Malaysia<\/p>\n

ID 592 The Determination of Patient Appointment Scheduling and Patients\u2019 Examination Room Assignment Policies: A Case Study<\/strong><\/a>
\nPing-Shun Chen, Li-Wen Liu, Ching-Ping Zheng, Department of Industrial and Systems Engineering, Chung Yuan Christian University, Chung Li District, Taoyuan City, 32023, Taiwan, ROC
\nWen-Tso Huang, Business School, Department of Financial Management, Minnan Normal University, Xiangcheng District, Zhangzhou City, 363000, China<\/p>\n

ID 593 Implementation of Karakuri Kaizen to Improve Productivity and Ergonomics in Wire Rope Industry<\/strong><\/a>
\nIzzat Muhaimin Madisa, Mohd Firdaus Mohd Taib and Norba\u2019ayah Ahmad Reza, Department of Materials, Manufacturing and Industrial Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia<\/p>\n

ID 594 DEA-cross efficiency approach for peer assessment of retail stores\u2019 efficiency<\/strong><\/a>
\nNomita Pachar and P C Jha, Department of Operational Research, University of Delhi, Delhi, India
\nAnshu Gupta, University School of Management and Entrepreneurship (USME), East Delhi Campus, Delhi Technological University (DTU), Delhi, India<\/p>\n

ID 596 The Impact of Waste Management in the Hospitality Industry Johannesburg North, South Africa<\/strong><\/a>
\nDr E I Edoun, Professor C Mbohwa and Mrs Thobile Yvonne Bhila, Faculty of Engineering and the Built Environment, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa<\/p>\n

ID 597 Application of Data Mining for Exploring Hidden Patterns in Tuberculosis Patients<\/strong><\/a>
\nFarzad Firouzi Jahantigh and Maryam Ostovare, Department of Industrial Engineering,\u00a0University of Sistan and Baluchestan, Zahedan, Iran<\/p>\n

ID 598 Factors Investigation for the Development of Medical Device towards Sustainable Product<\/strong><\/a>
\nTaisy Mak and Duangpun kritchanchai, Department of Industrial Engineering, Mahidol University, Salaya, Nakhon Pathom, 73170, Thailand<\/p>\n

ID 599 Radio Frequency Identification Based Communication of Smart Grid with Advance Metering Infrastructure survey<\/strong><\/a>
\nMuhammad Nauman Sheikh, Department of Electrical Engineering, University College of Engineering and Technology (UCET), The Islamia University of Bahawalpur, Pakistan<\/p>\n

ID 600 Analysis of new product development strategies between the green supply chain and non-green supply chain partners (case study: Doosheh Dairy Company)<\/strong><\/a>
\nHadi Gholizadeh and Nikbakhsh Javadian, Department of Industrial Engineering Mazandaran University of Science and Technology, Babol, Iran<\/p>\n

ID 601 Importance of Innovative Transformational Leadership on Employee Engagement in the Mining Industry<\/strong><\/a>
\nM. M. Manyuchi and A. Garg, Department of Management Sciences, School of Management Sciences, Tshwane University of Technology, South Africa<\/p>\n

ID 602 Factors Influencing The Success And Failure Of Small And Medium-Sized Enterprises In Tembisa Township, South Africa<\/strong><\/a>
\nDr E I Edoun, Professor C Mbohwa and Mrs Thobile Yvonne Bhila, Faculty of Engineering and the Built Environment, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa<\/p>\n

ID 603 Engineering Education and Self Dependence: A Nigerian Experience<\/strong><\/a>
\nCharles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, South Africa
\nPaul A. Ozor, Department of Quality and Operations Management, University of Johannesburg, South Africa
\nDepartment of Mechanical Engineering-Industrial Engineering and Management, University of Nigeria Nsukka, Nigeria<\/p>\n

ID 604 Detection & Diagnosis Of Malignancy By Laser Induced Fluorescence Spectra (LIF)<\/strong><\/a>
\nMrs. Priya Sachin Deole, Department of physics, G.S.Tompe Art\u2019s, Comm. & Science College,Chandur Bazar, Dist. Amravati (M.S) India
\nMr. Nachiket Sachin Deole and Mrs. Manasi Vyankatesh Ghamande, Department of Engineering Sciences and Humanities, Savitribai Phule University, Pune, India<\/p>\n

ID 605 Assessing the Effects of Sustainability Practices on Product Life Cycle- Clustering Approach<\/strong><\/a>
\nAbdul Salam Khan, NUST Business School, National University of Sciences and Technology, NUST, Islamabad<\/p>\n

ID 606 Supply Chain Management of Facility Operations and Maintenance Function in Apparel Sector<\/strong><\/a>
\nF.N. Abdeen, Y.G. Sandanayake and T. Ramachandra, Department of Building Economics, University of Moratuwa, Sri Lanka<\/p>\n

ID 607 Maintenance Scheduling and Optimization of Wind Parks: Models and Methods<\/strong><\/a>
\nMahmood Shafiee, Department of Energy and Power, Cranfield University, Bedfordshire MK430AL, UK<\/p>\n

ID 608 A Conceptual Framework to Optimise the Impact of Embodied Energy and Operational Energy in Buildings during the Design Stage<\/strong><\/a>
\nTennakoon G.A, Waidyasekara K G.A.S and Ekanayake B.J, Department of Building Economics, University of Moratuwa, 10400, Moratuwa, Sri Lanka<\/p>\n

ID 617 The Impact Of Customized Service And Guest Satisfaction In The Tourism And Hospitality Industry<\/strong><\/a>
\nMrs Thobile Yvonne Bhila, Faculty of Engineering and the Built Environment, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa<\/p>\n

ID 618 Relief Demand Modeling Using Bayesian Approach to Coordinate Humanitarian Logistics Planning<\/strong><\/a>
\nMohammad Anwar Rahman, Central Connecticut State University, New Britain, Connecticut, USA<\/p>\n

ID 619 The Effectiveness of Total Quality Management and Operations Performance at a Bakery Firm in The City of Tshwane, Pretoria South Africa<\/strong><\/a>
\nSyria Sibongile Chauke, EI Edoun and Charles Mbohwa, Quality and Operations Management, University of Johannesburg, RSA<\/p>\n

ID 620 The Essence of Communication and Its Operationalisation On Managerial Effectiveness<\/strong><\/a>
\nNkube Eva Masetlwa, EI Edoun and Mbohwa, Department of Quality and Operations Management, University of Johannesburg, South Africa<\/p>\n

ID 621 The Essence of Total Quality Management Philosophies in Business<\/strong><\/a>
\nSibongile Chauke, EI Edoun and Mbohwa, Quality and Operations Management, University of Johannesburg, South Africa<\/p>\n

ID 622 Analyzing the Impact of Location Factors on Building Construction Cost in Sri Lanka<\/strong><\/a>
\nThulasimaaran Parameswaran, T.S. Jayawickrama and D.G. Melagoda, Department of Building Economics, University of Moratuwa, Moratuwa, 10400, Sri Lanka<\/p>\n

ID 623 Development of The P I N T A R Concept for Designing Core Competencies Using The Malcolm Baldrige Performance Excellence Approach The Description Analysis At Third Party Logistics Company<\/strong><\/a>
\nSri Witjaksono Widiadibrata, Doctoral Management Program, Mercu Buana University, Jakarta, INDONESIA<\/p>\n

ID 624 Classification of Bearing Fault Location and Severity Using Cascade ANNs with Statistical and Spectral Features<\/strong><\/a>
\nPunyisa Kuendee and Udom Janjarassuk, Department of Industrial Engineering, Faculty of Engineering, King Mongkut\u2019s Institute of Technology Ladkrabang, Bangkok, Thailand<\/p>\n

ID 628 Forecasting at completion: Introduction of new method and comparing it with the method of Earned Schedule<\/strong><\/a>
\nAli Maaleki, MSc Social & Economical engineering, NO 501, Enterance 3, Block 3, Baharan Complex, Av bayat, Shahr-e-rey, Tehran
\nKaveh mohammad cyrus, Asistant Professor, Amirkabir university, Tehran, Iran
\nDavoud Gholamiangonabadi, Department of Industrial Engineering and Management Systems, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran<\/p>\n

ID 629 Feature Selection and Machine Learning Classification for Live P2P Traffic<\/strong><\/a>
\nHaitham A. Jamil, University of Elimam Elmahdi, Kosti, Sudan
\nBushra M. Ali, University of Technology Malaysia, Johor, Malaysia<\/p>\n

ID 630 Identification of Opinion Leadership: A Literature Review<\/strong><\/a>
\nL.M.B.N. Kolugala and H.S. Jayasena, Department of Building Economics, University of Moratuwa, Sri Lanka<\/p>\n

ID 631 An Equity-based Positioning of Solid Waste Collection Sites for an Equitable Waste-induced Disaster Risk<\/strong><\/a>
\nEko Setiawan, Much Djunaidi, Hafidh Munawir, Alfa Novian Hendranansa Putra, Praditsya Paramitha, Eliza Arrofi Maharani and Bella Brylian, Industrial Engineering Department, Universitas Muhammadiyah Surakarta, Sukoharjo, Central Java, Indonesia<\/p>\n

ID 632 The Analysis of Pros and Norms of Outsourcing Logistics Operational Activities in the Construction Industry in South Africa<\/strong><\/a>
\nKatlego Frans Letsoko and Xhanti Dyonase, Department of Operations Management and Quality Assurance at the University of Johannesburg, South Africa<\/p>\n

ID 633 Human Error Assessment in the Accident Causations Experienced among Vehicle Drivers in the Philippines<\/strong><\/a>
\nGann Sebastian B. Quiban, Bryan D. Caventa, Patricia Paula H. Corpuz, Francesco Nicolai L. Datu, Rica Jonell A. Millet and Yoshiki B. Kurata, Department of Industrial Engineering, Technological Institute of the Philippines, Quezon City, Philippines<\/p>\n

ID 634 Occupational Health and Issue in The Low Back Pain Among Filipino \u2013 Aged People Through Ordinal Logistic Regression<\/strong><\/a>
\nAngelo M. Alindogan, Felix John F. Amin, Nicole P. Clave, Queenie Colleen Guadalupe, Lynnette P. Salas, Ritz Jerard A. Tan, Arriane A. Palisoc and Yoshiki B. Kurata, Department of Industrial Engineering, Technological Institute of the Philippines, Quezon City, Philippines<\/p>\n

ID 635 Conceptual Facebook Model to Mitigate the Problem of Obesity among Sudanese Females<\/strong><\/a>
\nGhada Ahmad Abdelguiom, Information System Dept., Faculty Computing, UTM
\nHaitham A. Jamil, Faculty of Computer Science and Information Technology, University of Elimam Elmahdi, Kosti, White Nile, Sudan<\/p>\n

ID 636 What are the factors affecting the successful implementation of Industrial engineering projects or the application of Industrial engineering tools and techniques in mining in a South African context?<\/strong><\/a>
\nTafadzwa Chawasemerwa, University of Witwatersrand, South Africa<\/p>\n

ID 637 Design an optimal doctor scheduling system<\/strong><\/a>
\nTafadzwa Chawasemerwa, University of Witwatersrand, South Africa<\/p>\n

ID 638 Competency Mapping for Managers in Governmental Organizations by Shannon entropy<\/strong><\/a>
\nArash Namvar, M.Sc. Construction engineering and management, Amir Kabir University, Tehran, Iran
\nAli Maaleki, M.Sc. Industrial Engineering, Amir Kabir University, Tehran, Iran
\nFarid Saeedi, M.Sc. Industrial Management, Persian Gulf University, Bushehr, Iran<\/p>\n

ID 639 SMEs Managing Organisational Knowledge In The 4IR Era: A Case Study Of Developing Countries<\/strong><\/a>
\nLawrance Seseni and Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, RSA<\/p>\n

ID 640 Design Intervention in Maheshwar Handloom, MP, India<\/strong><\/a>
\nPratik Mukesh, Master of Design, Design Discipline, PDPM Indian Institute of Information Technology, design and Manufacturing, Jabalpur, M.P., India<\/p>\n

ID 641 Fleet management through Vehicle Routing Problem and Multi Depot Vehicle Scheduling Problem: A Literature Review<\/strong><\/a>
\nZiyad bahou, Equipe MOAD6, Mohammadia School of Engineers, Mohammed V University of Rabat, Morocco
\nJamal Elhachmi, Laboratory of Electronics and Telecommunications, Mohammadia School of Engineers (EMI), Rabat, Morocco<\/p>\n

ID 642 Analysis of Student’s abilities in Completing Mathematical Problems Dimension Three in Junior High School<\/strong><\/a>
\nRahmi Wiganda Elastika, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nZulkarnain, Department of Mathematics, Faculty of teacher training and science, Universitas Riau, Indonesia
\nMefa Indriati, Department of Mathematics, Faculty of teacher training and science, Universitas Islam Riau, Indonesia
\nSukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
\nSubiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 643 Performance Assessment of Hardboard Material\u2019s Supplier in PT. Nutech Pundi Artha using Analytic Network Process (ANP) Methods<\/strong><\/a>
\nMuhammad Kholil, Hendri and Farah Devina, Program Studi Teknik Industri, Fakultas Teknik, Universitas mercu Buana, Jl. Meruya Selatan No. 1 Kembangan, Jakarta Barat, Indonesia<\/p>\n

ID 644 Production System Disturbances of Heavy Equipment Component Industry (Case Study at PT ABC)<\/strong><\/a>
\nIveline Anne Marie, Pudji Astuti and Debbie Kemala Sari, Industrial Engineering Department, Faculty of Industrial Technology, Trisakti University Kampus, Jakarta Barat, Indonesia<\/p>\n

ID 645 Property Rights on Existing Reconstruction and Development Program Houses (RDP)- Literature review<\/strong><\/a>
\nMashwama Nokulunga, Gladness Makgobi and Thwala Didi, Department of Construction Management and Quantity Surveying, University of Johannesburg\/Johannesburg, South Africa
\nSARChI in Sustainable Construction Management and Leadership in the Built Environment, Faculty of Engineering and the Built Environment, University of Johannesburg\/ Johannesburg, South Africa<\/p>\n

ID 650 Big Data Issues and Processing Techniques: A Comprehensive Survey<\/strong><\/a>
\nAisha Shabbir, Kamalrulnizam Abu Bakar, Raja Zahilah Raja Mohd. Radzi and Sulaiman Azeem, University Technology Malaysia<\/p>\n

ID 651 Theoretical examination of sustainability on low cost affordable housing and corporate governance<\/strong><\/a>
\nMashwama Nokulunga, Gladness Makgobi and Aigbavboa Clinton, Department of Construction Management and Quantity Surveying, University of Johannesburg\/Johannesburg, South Africa
\nSARChI in Sustainable Construction Management and Leadership in the Built Environment, Faculty of Engineering and the Built Environment, University of Johannesburg\/ Johannesburg, South Africa<\/p>\n

ID 652 Pilot Study: Organizational Creativity in Indonesia\u2019s Creative Industries<\/strong><\/a>
\nBudi Hartono and Subagyo, Mechanical and Industrial Engineering Department, Gadjah Mada University, Yogyakarta, Indonesia
\nRetno Indriartiningtias, Industrial Engineering Department, Trunojoyo University, Bangkalan, East Java, Indonesia
\nDoctoral Student in Mechanical and Industrial Engineering Department, Gadjah Mada University, Yogyakarta, Indonesia<\/p>\n

ID 653 Semiconductor\u2019s Automotive Burn-in Testing Improvement by Using Six Sigma<\/strong><\/a>
\nNorzima Zulkifli and Haresh Kumar Shanmugam, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia<\/p>\n

ID 654 Optimization Model to Enhance the Petroleum Distribution Network in Sri Lanka<\/strong><\/a>
\nW.W.N. Sachini, W.M.S.K. Weerabahu and R. Wickramarchchi, Department of Industrial Management, University of Kelaniya, Sri Lanka<\/p>\n

ID 655 Newsvendor Models and Biases under Ambiguity<\/strong><\/a>
\nPeeyush Mehta, Indian Institute of Management Calcutta, Operations Management Group, Kolkata, India \u2013 700104
\nR K Amit, Indian Institute of Technology Madras, Dept. of Management Studies, Chennai<\/p>\n

ID 656 Perceptions and Career Choices Linked to the UAE Youths Entrepreneurial Intention<\/strong><\/a>
\nFauzia Jabeen, Abu Dhabi, University Abu Dhabi, United Arab Emirates<\/p>\n

ID 657 Expansion Tale of Al Fanar Restaurant<\/a><\/strong>
\nFauzia Jabeen, Abu Dhabi University, Abu Dhabi, United Arab Emirates<\/p>\n

ID 658 Model-Based Engineering of a Process Wash Plant using SysML: Case study of beneficiation processes in a phosphate industry<\/strong><\/a>
\nMariem, Ait Bakader Usmba Khouribga, Morocco<\/p>\n

ID 659 Analysis of Inventory Control Planning for P-200 Chip (Semi Dull) Using Material Requirement Planning (MRP) Method at Pt. Indonesia Toray Sinthetic<\/strong><\/a>
\nHendri Hendri, Universitas Mercu Buana, Jakarta Barat, Indonesia
\nMuhammad Kholil, Universitas Mercu Buana, Jakarta Indonesia
\nSaiful Munajat, Program Studi Teknik, Industri Fakultas Teknik, Universitas Mercu Buana, Jakarta Barat, Indonesia<\/p>\n

ID 660 Gorelax: A User-Ergonomically Designed Backpack for Stress Prone Millennials in the Philippines<\/strong><\/a>
\nRyan Christopher Malicdem, Technological Institute of the Philippines, Quezon City, Philippines
\nChrisjohn Paul Angelo Reyes, Technological Institute of the Philippines, Quezon City, Philippines
\nAngel Joy Quizon, Technological Institute of the Philippines, Quezon City, Philippines
\nYoshiki Kurata, Technological Institute of the Philippines, Quezon City, Philippines<\/p>\n

ID 661 Role of Tourism IT Adoption and Tourism Risk Management Orientation On Collaborative Assets: Implications for Sustainable Tourism Supply Chain Performance<\/strong><\/a>
\nSantanu Mandal, Amrita School of Business, Amrita Vishwa Vidyapeetham, Coimbatore, India<\/p>\n

ID 662 Influence of IOS Appropriation in Tourism Agility and Tourism Resilience Development: An Empirical Study<\/strong><\/a>
\nSantanu Mandal, Amrita School of Business, Amrita Vishwa Vidyapeetham, Coimbatore, India<\/p>\n

ID 663 Advancement of Life Cycle Assessment Towards Eco-design In Ceramic Floor Tile Industry In Sri Lanka<\/strong><\/a>
\nKamalakkannan Sivappirakasam, University of Peradeniya, Faculty of Engineering Peradeniya, Sri Lanka<\/p>\n

ID 664 Academic \u2013 Industry Partnership to Develop Tomorrow\u2019s Engineering Innovators<\/strong><\/a>
\nCarol Gattis, University of Arkansas, Fayetteville, United States<\/p>\n

ID 665 Big Data Tasks Execution Time Analysis Using Machine Learning Techniques<\/strong><\/a>
\nAisha Shabbir, University Technology Malaysia, skudai, Malaysia
\nKamalrulnizam Abu Bakar, skudai, Malaysia
\nRaja Zahilah Raja Mohd. Radzi, skudai, Malaysia
\nMuhammad Siraj, Department of Information Engineering & Computer Science,\u00a0University of Trento, Trento, Italy<\/p>\n

ID 666 Analysing the Pros and Norms of Outsourcing Logistics Operational Activities in Construction in South Africa<\/strong><\/a>
\nKatlego Letsoko and\u00a0Xhanti Dyonase, University of Johannesburg, Johannesburg, South Africa<\/p>\n

ID 667 Vertical Wind Turbines as Power Plants at the Railroad Tracks<\/strong><\/a>
\nAndreas Arga Pembangunan Nasional Veteran Jakarta University Bogor Indonesia 667<\/p>\n

ID 668 Formulating a Strategic Management of Social E-Commerce through a Combination of SWOT and PESTLE Analysis : Case Study<\/strong><\/a>
\nAbel Kristanto Widodo, Universitas Diponegoro, Semarang, Indonesia
\nWidhiyaningrum, Diponegoro University, Semarang, Indonesia
\nMoh Rizal Tahqiqi, Diponegoro University, Semarang, Indonesia
\nA.A.S. Manik Mahachandra J.M., Diponegoro University, Semarang, Indonesia<\/p>\n

ID 669 Application of Spatial Weighting Matrix of GSTAR by Using CLARANS Clustering on Farmer Exchange Rates in 32 Provinces in Indonesia<\/strong><\/a>
\nAnnisa Azizah, Universitas Padjadjaran, Sumedang, Indonesia
\nRini Cahyandari, Universitas Islam Negeri Sunan Gunung Djati Bandung, Bandung, Indonesia
\nArief Fatchul Huda, Universitas Islam Negeri Sunan Gunung Djati Bandung, Bandung, Indonesia
\nSukono F, Department of Mathemetics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Bandung, Indonesia
\nSubiyanto Subiyanto, Universitas Padjadjaran, Sumedang, Indonesia
\nAbdul Talib, Bon Universiti Tun Hussein Onn Malaysia, Batu Pahat, Malaysia<\/p>\n

ID 670 The LASSO (Least Absolute Shrinkage and Selection Operator) Method to Predict Indonesian Foreign Exchange Deposit Data<\/a>
\n<\/strong>Trisha Magdalena, Adelheid Januaviani, Nurul Gusriani, Khafsah Joebaedi, Sukono F and Subiyanto Subiyanto, Universitas Padjadjaran, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Batu Pahat, Malaysia<\/p>\n

ID 671 Evaluation of Redesign Layout Using Discrete Event Simulation (DES) Oral<\/strong><\/a>
\nZakka Ugih Rizqi, Islamic University of Indonesia, Yogyakarta, Indonesia
\nRachmat Aulia, Islamic University of Indonesia, Sleman Indonesia 671<\/p>\n

ID 672 Lean Manufacturing and Ergonomics in the metallurgical industry: an integrated approach for performance improvement<\/strong><\/a>
\nAna Lu\u00edsa Ramos, University of Aveiro (DEGEIT\/GOVCOPP), Aveiro, Portugal
\nMarlene Brito, DEGEIT University of Aveiro, Aveiro, Portugal
\nPaula Carneiro, University of Minho (ALGORITMI Centre of Engineering), Braga, Portugal
\nMaria Ant\u00f3nia Gon\u00e7alves, Polytechnic of Porto – Research Center of Mechanical Engineering (CIDEM), Porto, Portugal<\/p>\n

ID 673 AMBHigh: A User Ergonomic Mobile Learning Application Intended for Business Management Secondary Students in the Philippines<\/strong><\/a>
\nBert Regin, Santiago Technological Institute of the Philippines, Quezon City, Philippines<\/p>\n

ID 674 Heuristics for Course Planning in Degree Programs<\/strong><\/a>
\nKingsley Gnanendran University of Scranton Scranton United States
\nManohar Madan University of Wisconsin-Whitewater Whitewater United States<\/p>\n

ID 675 Supply Chain Strategy for Ayamas Food Cooperation Sdn. Bhd.<\/strong><\/a>
\nMohd Effendi Amran and Habibah Norehan Binti Haron, Razak Faculty of Technology and Informatics, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia<\/p>\n

ID 677 Management of Waste Water in Meat Processing Sector: Case Study of Ekurhuleni Abattoir in Johannesburg
\n<\/strong><\/a>Victor Msimango, Paul Amaechi Ozor\u00a0<\/sup>and Charles Mbohwa,\u00a0Department of Quality and Operations Management, Faculty of Engineering and the Built Enviroment, University of Johannesburg, South Africa
\nPaul Amaechi Ozor, Department of Mechanical Engineering, Faculty of Engineering, University of Nigeria Nsukka, Nigeria<\/p>\n

ID 678 Red Bin Analysis – The Art of Problem Solving in Manufacturing Industry
\n<\/strong><\/a>Sumit Shandilya and Jaskiran Arora, School of Management, BML Munjal University, Gurgaon, Haryana, India
\nKalluri Vinayak, School of Engineering & Technology, BML Munjal University, Gurgaon, Haryana, India<\/p>\n

ID 679\u00a0\u00a0 Minimizing Mean Weighted Expected Tardiness by Integrating Preventive Maintenance and Production Scheduling Using Genetic Algorithm<\/strong><\/a>
\nSumiharni Batubara, Iveline Anne Marie, and Cattelya F.H,\u00a0Industrial Engineering Department, Faculty of Industrial Technology,\u00a0Trisakti University, Jakarta Barat, INDONESIA<\/p>\n

ID 680\u00a0\u00a0 A Quantitative Approach for Similarity Comparison of the Terminologies in Standard Documents<\/a>
\n<\/strong>Huixing Meng, Department of Industrial Engineering, Tsinghua University, Beijing, China
\nKanittha Setthapitayakul, Department of Industrial Engineering, Tsinghua University, Beijing, China
\nYan-Fu Li, Department of Industrial Engineering, Tsinghua University, Beijing, China<\/p>\n

ID 685\u00a0\u00a0 Personalized Product Recommendations on E-Commerce Websites with the use of Social Media<\/a>
\n<\/strong>Pankaj Dutta, Shailesh J Mehta School of Management, Indian Institute of Technology Bombay, Mumbai, India
\nHiren Rathod, Shailesh J Mehta School of Management, Indian Institute of Technology Bombay, Mumbai, India
\nShanil Soni, Shailesh J Mehta School of Management, Indian Institute of Technology Bombay, Mumbai, India
\nPratistha Chandra, Shailesh J Mehta School of Management, Indian Institute of Technology Bombay, Mumbai, India<\/p>\n

ID 686\u00a0\u00a0 Data Mining in Healthcare Records: A Review Based on the Kind of Knowledge<\/a>
\n<\/strong>Maria Sabastin S., Department of Management, Amrita Vishwa Vidyapeetham, Bengaluru, Karnataka, India
\nAkshay Anil Nair, Department of Management, Amrita Vishwa Vidyapeetham, Bengaluru, Karnataka, India
\nRohit R., Department of Management, Amrita Vishwa Vidyapeetham, Bengaluru, Karnataka, India<\/p>\n

ID 688 \u00a0 The Influence of Organizational Culture on Students\u2019 Satisfaction in Saudi Arabia<\/a>
\n<\/strong>Saad Aziz Al-Otaibi, Azman Hashim International Business School, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra (Jalan Semarak), Kuala Lumpur, Malaysia.
\nSha\u2019ri Mohd Yusof, Razak Faculty of Technology and Informatics, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra (Jalan Semarak), Kuala Lumpur, Malaysia
\nWan KhairuzamanWan Ismail, SulaimanalRajhi School of Business, SulaimanalRajhi Colleges, Alqassim, Kingdom of Saudi Arabia<\/p>\n

ID 721\u00a0\u00a0 The Effect of Classroom Questioning on Oral English Output of Junior High School Students<\/a>
\n<\/strong>Lu Juan, School of Education, Universiti Teknologi Malaysia; School of Foreign Studies, Shaanxi University of Technology, China
\nNoraffandy Bin Yahaya, School of Education, Universiti Teknologi Malaysia, Malaysia<\/p>\n

ID 722\u00a0\u00a0 A Multi-Objective Generalized Intuitionistic Fuzzy Linear Fractional Inventory Model with Possibility and Necessity Constraints<\/a>
\n<\/strong>Totan Garai, Assistant Professor, Department of Mathematics, Silda Chandra Sekhar College, West Bengal, India
\nTapan Kumar Roy, Professor, Department Mathematics, Indian Institute of Engineering Science and Technology, Shibpur, West Bengal, India<\/p>\n

ID 723\u00a0\u00a0 SMOSA Optimization Approach to a Multi Objective Model for a Machine Tool Selection and Operation Allocation Problem in FMS<\/a>
\n<\/strong>Roozbeh Azizmohammadi, Department Of Industrial Engineering, Payame Noor University, Tehran,Iran
\nAbbas Mahmoudabadi, Department of Industrial Engineering, MehrAstan University, Guilan, Iran<\/p>\n

ID 724 \u00a0 Modeling Analysis in Furniture Company by Using System Dynamics<\/a>
\n<\/strong>Kevin Oktavian, Departement of Industrial Engineering, Universitas Tarumanagara, Grogol
\nPetamburan, West Jakarta, Indonesia
\nAhmad Ahmad, Departement of Industrial Engineering, Universitas Tarumanagara, Grogol
\nPetamburan, West Jakarta, Indonesia
\nLilyana Jap, Departement of Industrial Engineering, Universitas Tarumanagara, Grogol
\nPetamburan, West Jakarta, Indonesia
\nLina Gozali, Departement of Industrial Engineering, Universitas Tarumanagara, Grogol
\nPetamburan, West Jakarta, Indonesia<\/p>\n

ID 748\u00a0\u00a0 Quality Improvement in Refrigerator Division for 1-Door Refrigerator with Implementation of Six Sigma and Data Mining Method<\/a>
\n<\/strong>Rina Fitriana, Quality Control Laboratory, Industrial Engineering Department, Trisakti University
\nJohnson Saragih, Quality Control Laboratory, Industrial Engineering Department, Trisakti University
\nAzizah Khairina Sarasetyo, Quality Control Laboratory, Industrial Engineering Department, Trisakti University<\/p>\n

ID 753\u00a0\u00a0 Occupational Health and Safety Issues among Workers in Stone Industries in North Karnataka<\/a>
\n<\/strong>M. Manzoor Hussain, Department of Mechanical Engineering, Jawaharlal Nehru Technological
\nUniversity, Hyderabad, INDIA
\nKaturu Phani Raja Kumar, Project Manager, Tech Mahindra Americas, USA.
\nQutubuddin S.M., Industrial and Production Engineering Department, P.D.A.College of Engineering, Gulbarga, Karnataka State, INDIA
\nHebbal S.S., Principal, P.D.A.College of Engineering, Gulbarga, Karnataka State, INDIA<\/p>\n

ID 754\u00a0\u00a0 Optimization of Parameters for Sustainable Manufacturing Process \u2013 Special Focus on Machining Process<\/a>
\n<\/strong>Abdullah Al-Ghielani , Sultan Qaboos University
\nSujan Piya, Assistant Professor, Sultan Qaboos University
\nRamanathan Arunachalam, Sultan Qaboos University
\nBakhit Al-Mahri, Sultan Qaboos University
\nAbdullah Al-Ghielani, Sultan Qaboos University
\nAlwaleed Al-Jahwari, Sultan Qaboos University<\/p>\n

ID 756\u00a0\u00a0 Stochastic Modeling of Rail Under-head Failure Risks<\/a>
\n<\/strong>Sagheer Ranjha, Faculty of Science, Engineering and Technology, Swinburne University of Technology, Hawthorn, Australia
\nEkambaram Palaneeswaran, Faculty of Science, Engineering and Technology, Swinburne University of Technology, Hawthorn, Australia<\/p>\n

ID 757\u00a0\u00a0 Ergonomically Design E-Book to Improve Comprehension and Retention<\/a>
\n<\/strong>Grace Lorraine D. Intal, School of Industrial Engineering and Engineering Management, Mapua University, Muralla St., Intramuros Manila
\nJanine Rose Talens School of Industrial Engineering and Engineering Management, Mapua University, Muralla St., Intramuros Manila<\/p>\n

ID 758\u00a0\u00a0 Develop Tourism Demand Forecasting Model using Artificial Neural Network<\/a>
\n<\/strong>Abdul Talib Bon, Faculty of Technology Management and Business Universiti Tun Hussein Onn Malaysia, Parit Raja, Batu Pahat 86400, Johor, Malaysia
\nChan Seik Tieng, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Parit Raja, Batu Pahat 86400, Johor, Malaysia<\/p>\n

ID 759 \u00a0 A Machine Learning based Intelligent Agent for Human Resource Planning in IC Design Service Industry<\/a>
\n<\/strong>Chieh Hsu, Department of Industrial Engineering and Engineering Management, National Tsing
\nHua University, Hsinchu, Taiwan, Artificial Intelligence for Intelligent Manufacturing Systems
\n(AIMS) Research Center, Ministry of Science & Technology, Taiwan
\nHsuan-An Kuo, Department of Industrial Engineering and Engineering Management, National Tsing, Hua University, Hsinchu, Taiwan, Artificial Intelligence for Intelligent Manufacturing Systems, (AIMS) Research Center, Ministry of Science & Technology, Taiwan
\nJu-Chien Chien, Department of Industrial Engineering and Engineering Management, National Tsing, Hua University, Hsinchu, Taiwan, Artificial Intelligence for Intelligent Manufacturing Systems, (AIMS) Research Center, Ministry of Science & Technology, Taiwan
\nWenhan Fu, Department of Industrial Engineering and Engineering Management, National Tsing, Hua University, Hsinchu, Taiwan, Artificial Intelligence for Intelligent Manufacturing Systems, (AIMS) Research Center, Ministry of Science & Technology, Taiwan
\nKang-Ting Ma, Department of Industrial Engineering and Engineering Management, National Tsing, Hua University, Hsinchu, Taiwan, Artificial Intelligence for Intelligent Manufacturing Systems, (AIMS) Research Center, Ministry of Science & Technology, Taiwan
\nChen-Fu Chien, Department of Industrial Engineering and Engineering Management, National
\nTsing, Hua University, Hsinchu, Taiwan, Artificial Intelligence for Intelligent Manufacturing Systems, (AIMS) Research Center, Ministry of Science & Technology, Taiwan<\/p>\n

ID 760\u00a0\u00a0 Models and Metaheuristics for the Pollution Traveling Salesman Problem<\/a>
\n<\/strong>Paolo Toth, DEI, University of Bologna, Viale Risorgimento 2, Bologna, Italy
\nValentina Cacchiani, DEI, University of Bologna, Viale Risorgimento 2, Bologna, Italy
\nCarlos Contreras-Bolton, DEI, University of Bologna, Viale Risorgimento 2, Bologna, Italy
\nJohn W. Escobar, Pontificia Universidad Javeriana, Cali, Colombia
\nLuis M. Escobar-Falcon, Technological University of Pereira, Pereira, Colombia
\nRodrigo Linfati, University of Bio Bio, Av. Collao, Concepcion, Chile<\/p>\n

ID 761 \u00a0 Entrepreneurial Competencies and Business Performance of Pontian Small Medium Enterprises<\/a>
\n<\/strong>Avlyin Jay Sumayong, Department of Technology Management, Faculty of Technology
\nManagement and Business, University Tun Hussein Onn Malaysia
\nNg Kim Soon, Department of Technology Management, Faculty of Technology
\nManagement and Business, University Tun Hussein Onn Malaysia
\nMuhammad Raushan Bin Azhar, Department of Technology Management, Faculty of Technology Management and Business, University Tun Hussein Onn Malaysia
\nAgnes Sumayung, Department of Technology Management, Faculty of Technology
\nManagement and Business, University Tun Hussein Onn Malaysia<\/p>\n

ID 762 \u00a0 Understanding the Antecedents of Social Media Fatigue<\/a>
\n<\/strong>Shih-Chih Chen, Department of Information Management, National Kaohsiung University of Science and Technology, Kaohsiung, Taiwan, Republic of China<\/p>\n

ID 763 \u00a0 Current Health Disease among Solid Waste Management Workers: A Case Study in Malaysia<\/a>
\n<\/strong>Ivy Deirdre Mangkau, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Malaysia
\nDr. Seow Ta Wee, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Malaysia
\nFederick Noel Mangkau, Faculty of Science and Natural Resources, Universiti Malaysia Sabah, Sabah, Malaysia<\/p>\n

ID 764 \u00a0 Design and Development of a Decision Support System with Visual Analytics to Improve MRT Maintenance Operations<\/a>
\n<\/strong>Grace Lorraine D. Intal, School of Information Technology, Mapua University, Muralla St., Intramuros Manila
\nThea Marielle C. Gomez, School of Information Technology, Mapua University, Muralla St., Intramuros Manila
\nAlison Vince T. Cadorniga, School of Information Technology, Mapua University, Muralla St., Intramuros Manila
\nJeongwong Kang, School of Information Technology, Mapua University, Muralla St., Intramuros Manila<\/p>\n

ID 765 \u00a0 Pilot Study: Organizational Creativity in Indonesia\u2019s Creative Industries<\/a>
\n<\/strong>Retno Indriartiningtias, Doctoral Student Doctoral in Mechanical and Industrial Engineering Department, Gadjah Mada University, Yogyakarta, Indonesia, Industrial Engineering
\nDepartment, Trunojoyo University, Bangkalan, East Java, Indonesia
\nBudi Hartono, Subagyo, Mechanical and Industrial Engineering Department, Gadjah Mada University, Yogyakarta, Indonesia<\/p>\n

ID 766 \u00a0 Reasoning Types in Industrial Engineering\/Operations Management Processes<\/a>
\n<\/strong>Muhittin Oral, Graduate School of Business, Ozyegin University, Istanbul, Turkey
\nOssama Kettani, Modellium Inc., Centre Ville, Qu\u00e9bec City, Canada<\/p>\n

ID 767 \u00a0 Information Security for Hospital Information System Using COBIT 5 Framework<\/a>
\n<\/strong>Khilda Nistrina, Faculty of Technology Management and Business, University Tun Hussein Onn Malaysia, Johor
\nProf. Dr. H. Abdul Talib Bin Bon, Faculty of Technology Management and Business, University Tun Hussein Onn Malaysia, Johor<\/p>\n

ID 769 \u00a0 A Conceptual Framework on the Role of Road Safety Management Intervention in Overcoming Road Accident<\/a>
\n<\/strong>Siti Hawa Harith, Faculty of Social Science and Humanities, Universiti Teknologi Malaysia, Johor, Malaysia, School of Business Management, Universiti Utara Malaysia, Kedah, Malaysia
\nNorashikin Mahmud, Faculty of Social Science and Humanities, Universiti Teknologi Malaysia, Johor, Malaysia
\nMehran Doulatabadi, Graduate School of Business Administration, Meiji University, Tokyo, Japan<\/p>\n

ID 770 \u00a0 Review of the Implementation Status & Associated Challenges for Industry 4.0 Transformation in Asian MSMEs<\/a>
\n<\/strong>Sanjiv Narula, Research Scholar, BML Munjal University
\nVishal Talwar, BML Munjal university
\nMaheshwar Talwar, BML Munjal university
\nSurya Prakash, BML Munjal university
\nSaravjit singh, BML Munjal university<\/p>\n

ID 771 \u00a0 Measuring Utrecht Work Engagement Scale: Factor Analysis Approach in Telecommunication Sector<\/a>
\n<\/strong>Abdul Talib Bon, Faculty of Technology Management, Business and Entrepreneurship,
\nUniversity Tun Hussein Onn Malaysia, Parit Raja, Malaysia
\nAbdirahman Mohamud Shire, Faculty of Technology Management, Business and Entrepreneurship, University Tun Hussein Onn Malaysia, Parit Raja, Malaysia<\/p>\n

ID 772 \u00a0 Increasing Productivity and Efficiency for Third Party Logistics Service<\/a>
\n<\/strong>Josephine D. German, School of Industrial Engineering and Engineering Management, Map\u00faa University, Intramuros, Manila, Philippines
\nMaria Katrina T. Asuncion, School of Industrial Engineering and Engineering Management, Map\u00faa University, Intramuros, Manila, Philippines
\nLouie E. Pacheco, School of Industrial Engineering and Engineering Management, Map\u00faa University, Intramuros, Manila, Philippines<\/p>\n

ID 774: Problem Based Learning for Techno-economic Analysis for Logistics System Course: Case in a State-owned Warehouse<\/a>
\n<\/strong>Muhammad Hisjam, Department of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia<\/p>\n

ID 775 \u00a0 Preparation of Polyacrylamide Grafted onto Magnetic Cellulose as Flocculant in Wastewater Pre-treatment Application<\/a>
\n<\/strong>Mohd Hizam, School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Johor, Malaysia
\nNorzita Ngadi, School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Johor, Malaysia<\/p>\n

ID 776\u00a0\u00a0 Environmental Factor and Road Accident: A Review Paper<\/a>
\n<\/strong>Siti Hawa Harith, Faculty of Social Science and Humanities, Universiti Teknologi Malaysia, Johor, Malaysia, School of Business Management, Universiti Utara Malaysia, Kedah, Malaysia
\nNorashikin Mahmud, Faculty of Social Science and Humanities, Universiti Teknologi Malaysia
\nJohor, Malaysia
\nMehran Doulatabadi, Graduate School of Business Administration, Meiji University, Tokyo, Japan<\/p>\n

ID 777\u00a0\u00a0 Learning 4.0: Connecting the Dots, Reaching the Unbleached by ICT Adoption in Education<\/a>
\n<\/strong>Meenakshi Narula, Educator and Co-coordinator , Blue Bellls model school
\nSanjiv Narula, Research Scholar, BML Munjal University
\nSudhanshu Padhey, Hero
\nSoumen Bhattacharya<\/p>\n

ID 778\u00a0\u00a0 Surfactant and Polymer-Nanoparticle Interaction with Heavy Crude Oil<\/a>
\n<\/strong>Rahul Saha, Department of Chemical Engineering, Indian Institute of Technology Guwahati,
\nIndia
\nRamgopal Uppaluri, Department of Chemical Engineering, Indian Institute of Technology, Guwahati,India
\nPankaj Tiwari, Department of Chemical Engineering, Indian Institute of Technology Guwahati,
\nIndia<\/p>\n

ID 779 \u00a0 The Capacitated Multiple-Allocation Hub Location Problem Model for Railway Logistics Transportation<\/a>
\n<\/strong>Virda Hersy Lutviana Saputri, Master Program of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
\nWahyudi Sutopo, Department of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
\nYuniaristanto, Department of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
\nMuhammad Hisjam, Department of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia<\/p>\n

ID 780\u00a0\u00a0 The Project Based Learning Combined with Problem Solving Based Learning in Industrial Engineering Programs<\/a>
\n<\/strong>Eldon Caldwell, Dean of Industrial Engineering Department, University of Costa Rica<\/p>\n

ID 781\u00a0 Effect of Emotional Intelligence on Employee Work-Engagement and Career Satisfaction Using Thriving As a Mediator and Power Distance as a Moderator<\/a>
\n<\/strong>Abroo Murtaza, Foundation University Rawalpindi Campus, Pakistan<\/p>\n

ID 782 \u00a0 Enhancing Firm Performance through Human Resource Management (HRM) Practices and HR Roles<\/a>
\n<\/strong>Ivana voo, UTM
\nKhairiah Soehod, Universiti Teknologi Malaysia
\nChoi Sang Long, Raffles University Iskandar
\nMehran Doulatabadi, Visiting Senior Research Fellow, Meiji University<\/p>\n

ID 783 \u00a0 Impact of Exploitative Leadership on Employee Outcomes and Moderating Role of Narcissism<\/a>
\n<\/strong>Irfan Sakhawat, Riphah International University Islamabad
\nAsma Gul, Riphah International University Islamabad
\nAbroo Murtaza, Riphah International University Islamabad<\/p>\n

ID 784\u00a0\u00a0 Development of Framework for the Core Soft Skills and Competencies Required by Project Managers in Oil and Gas Industry<\/a>
\n<\/strong>Esra Abusharkh, Sultan Qaboos University
\nAsila Al-Shamli, Sultan Qaboos University
\nNasr Al Hinai, Sultan Qaboos University
\nEmad Summad, Assistant Professor, Sultan Qaboos University<\/p>\n

ID 785\u00a0\u00a0 Individual Characteristics Influencing Employee Innovative Behavior with Reward as Moderator in Universiti Teknologi Malaysia<\/a>
\n<\/strong>Ivana voo, UTM
\nKhairiah Soehod, Universiti Teknologi Malaysia
\nHapriza Ashari, Universiti Teknologi Malaysia
\nEbi Shahrin Suleiman, Universiti Teknologi Malaysia
\nNorzaidahwati Zaidin, Universiti Teknologi Malaysia
\nRoshaslizawati Mohd Noor, Universiti Teknologi Malaysia
\nMehran Doulatabadi, Visiting Senior Research Fellow, Meiji University<\/p>\n

ID 786\u00a0\u00a0 Design of an Automated Millet Milling Machine<\/a>
\n<\/strong>Kudzaishe L Mudzingwa, University of Zimbabwe, Department of Mechanical Engineering, Mount Pleasant Harare, Zimbabwe
\nTawanda Mushiri, University of Zimbabwe, Department of Mechanical Engineering, Mount Pleasant Harare, Zimbabwe<\/p>\n

ID 787\u00a0\u00a0 Expanding Central Craft Company<\/a>
\n<\/strong>Dalal Al-Beshaier, Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
\nNour Al Enezi, , Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
\nNoor Khourshed, , Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
\nRawan Al-Elaj, , Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
\nSherifa Al-Kandari, , Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
\nMustafa Sendil, , Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait<\/p>\n

ID 788\u00a0\u00a0 Thermodynamic Modeling of Vapor Absorption Refrigeration Cycle-An Overview<\/a>
\n<\/strong>Uhamir Patrick, Engineer, The Benazir Bhutto Shaheed University Of Technology And Skill Development, Khairpur Mirs,\u00a0 Sindh, Pakistan
\nHussain Bux Marri, Dean Of Faculty, Bsc Engineering Technology, The Benazir Bhutto Shaheed University Of Technology And Skill Development, Khairpur Mirs, Sindh, Pakistan<\/p>\n

ID 789\u00a0\u00a0 Study of Wood Dust and Chemical Hazard at Wood Based Furniture<\/a>
\n<\/strong>Anis Amira Mat Zuki, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nJafri Mohd Rohani, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nKhidzir Zakaria, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nHafsam Maghpor, National Institute of Occupational Saafety and Health, Senai, Johor Bahru
\nIsmail Abdul Rahman, National Institute of Occupational Saafety and Health, Senai, Johor Bahru
\nNorul Azreen Azis, National Institute of Occupational Saafety and Health, Senai, Johor Bahru<\/p>\n

ID 790\u00a0\u00a0 Study of Ergonomics and Noise Hazard at Wood Based Furniture Industry<\/a>
\n<\/strong>Anis Amira Mat Zuki, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nJafri Mohd Rohani, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nKhidzir Zakaria, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nHafsam Maghpor, National Institute of Occupational Saafety and Health, 81400, Senai, Johor Bahru
\nIsmail Abdul Rahman, National Institute of Occupational Saafety and Health, 81400, Senai, Johor Bahru
\nNorul Azreen Azis, National Institute of Occupational Saafety and Health, 81400, Senai, Johor Bahru<\/p>\n

ID 791\u00a0\u00a0 Categorization of Shopping Centres in Malaysia: A Criteria-Based Delphi Study<\/a>
\n<\/strong>Ihfasuziella Ibrahim, Construction Research Institute of Malaysia (CREAM)
\nTalib Bon
\nAbdul Hadi Nawawi, Faculty of Architecture, Planning and Surveying, UiTM
\nEdie Ezwan Mohd Safian, Faculty Technology and Business, UTHM<\/p>\n

ID 792 \u00a0 The Role of Railway Industry in Indonesia’s Economic Growth<\/a>
\n<\/strong>Hermanto Dwiatmoko, Faculty of Engineering, University of Mercu Buana, Jakarta, Indonesia<\/p>\n

ID 795 \u00a0 Development of an Automated Railway Level Crossing Gate Control System using PLC<\/a>
\n<\/strong>Rumana Tasnim, World University of Bangladesh, Bangladesh
\nAbu Salman Shaikat, World University of Bangladesh, Bangladesh
\nKamruzzaman Sarkar, World University of Bangladesh, Bangladesh
\nIsmail Mahmud, World University of Bangladesh, Bangladesh
\nMohammad Ali, World University of Bangladesh, Bangladesh
\nTarikul Islam, World University of Bangladesh, Bangladesh<\/p>\n

ID 800 \u00a0 Estimating people stature based on Hand Length and Width: a case of Omani people<\/a>
\n<\/strong>Awadh Al Shehemi, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Oman
\nMohammad Khadem, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Oman
\nSujan Piya, Assistant Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Oman<\/p>\n

ID 801 \u00a0 Application of Multi-Criteria Decision Making (MCDM) Tools in Governance Evaluation of Accessible and Inclusive Urban Developments (AIUD)<\/a>
\n<\/strong>Amal AlKhamis, PhD in Engineering Management Program, University of Sharjah, Sharjah, UAE
\nFikri Dweiri, Department of Industrial Engineering and Engineering Management, University of Sharjah, Sharjah, UAE
\nHasim Altan, Department of Architectural Engineering, University of Sharjah, Sharjah, UAE<\/p>\n

ID 802 \u00a0 Contemporary Modular Study Table for Small Minimalist Residence in Malaysia<\/a>
\n<\/strong>Mohamad Ali Selimin, Universiti Tun Hussein Onn Malaysia, Malaysia
\nSafari Hasanuddin, Universiti Tun Hussein Onn Malaysia, Malaysia
\nJuliana Abdul Halip, University Tun Hussein Onn Malaysia (Uthm), Malaysia
\nAbdullah Al Rashid Ab Hamid, University Tun Hussein Onn Malaysia (Uthm), Malaysia
\nAbdul Talib Bon, Null, Universiti Tun Hussein Onn Malaysia, Malaysia<\/p>\n

ID 803 \u00a0 Calculation of Safety Stock and Bottleneck Minimization with Theory of Constraints Method Approach on Sand Coated Metal Roof Production in XYZ Ltd.<\/a>
\n<\/strong>Jason Nathanael Chandra, Department of Industrial Engineering, Tarumanagara University, Jakarta, Indonesia
\nLina Gozali, Department of Industrial Engineering, Tarumanagara University, Jakarta, Indonesia
\nLilyana Jap, Department of Industrial Engineering, Tarumanagara University, Jakarta, Indonesia<\/p>\n

ID 807 \u00a0 Handling Heavy Metal Waste through Utilization of Lapindo Activated Mud HCl to Realize Environmentally Friendly Industries<\/a>
\n<\/strong>Sigit Trimayanto, Department of Chemistry, State University of Surabaya, Surabaya, Indonesia
\nSari Edi Cahyaningrum, Department of Chemistry, State University of Surabaya, Surabaya, Indonesia<\/p>\n

ID 812\u00a0\u00a0 Supply China Finance with Applications of Block Chain<\/a>
\n<\/strong>Kin Keung Lai, International Business School, Shaanxi Normal University, Xian, China<\/p>\n

ID 813\u00a0\u00a0 Factors Affecting Efficiency of Police Stations in Metropolitan Police Division 3<\/a>
\n<\/strong>Pornpimol Chaiwuttisak, Statistics Department, King Mongkut\u2019s Institute of Technology Ladkrabang, Bangkok, Thailand<\/p>\n

ID 814 \u00a0 Achieving Performance Excellence through “TRADE” Best Practice Benchmarking Methodology: The Dubai Government Experience<\/a>
\n<\/strong>Mehran Doulatabadi , Visiting Senior Research Fellow , Meiji University<\/p>\n

ID 815\u00a0\u00a0 Developing Students Graduate Attributes in Service Learning Project through Online Platform<\/a>
\n<\/strong>Azizah Yusof, Faculty of Social Sciences and Humanities, Universiti Teknologi Malaysia, Johor Bahru, Johor, Malaysia
\nNoor Azean Atan, Faculty of Social Sciences and Humanities, Universiti Teknologi Malaysia, Johor Bahru, Johor, Malaysia
\nJamalludin Harun, Faculty of Social Sciences and Humanities, Universiti Teknologi Malaysia, Johor Bahru, Johor, Malaysia
\nMehran Doulatabadi, Graduate School of Business Administration, Meiji University, Tokyo,
\nJapan<\/p>\n

ID 818\u00a0\u00a0 Life Cycle Assessment in Ceramic Floor Tile Industry in Sri Lanka<\/a>
\n<\/strong>S. Kamalakkannan, Department of Manufacturing & Industrial Engineering, Faculty of Engineering, University of Peradeniya
\nR.L. Peiris, Department of Manufacturing & Industrial Engineering, Faculty of Engineering, University of Peradeniya
\nA.K. Kulatunga, Department of Manufacturing & Industrial Engineering, Faculty of Engineering, University of Peradeniya<\/p>\n

ID 819\u00a0\u00a0 Understanding Outsourcing from Client\u2019s Perspective: Revisiting the Existing Literature<\/a>
\n<\/strong>Damitha Rajini, Faculty of Graduate Studies, University of Colombo, Sri Lanka
\nK.A.S.P. Kaluarachchi, Department of Management and Organisation Studies, University of Colombo, Sri Lanka<\/p>\n

ID 820: Learning a Supply Chain Management Course by Problem Based Learning: Case Studies in the Newspaper Industry<\/a>
\n<\/strong>Wahyudi Sutopo, Research Group of Industrial Engineering and Techno-economics, Department of Industrial Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
\nEra Febriana Aqidawati, Laboratory of Logistics and Business System, Department of Industrial Engineering, Universitas Sebelas Maret, Surakarta, Indonesia<\/p>\n

ID 821 \u00a0 Predicting Online Search Intention for Validating Product Halalness Status<\/a>
\n<\/strong>Ida Giyanti, Industrial Engineering Study Program, Universitas Setia Budi, Surakarta, Indonesia
\nErni Suparti, Industrial Engineering Study Program, Universitas Setia Budi, Surakarta, Indonesia
\nWahyudi Sutopo, Research Group of Industrial Engineering and Techno-economics, Department of Industrial Engineering, Universitas Sebelas Maret, Surakarta, Indonesia<\/p>\n

ID 822 \u00a0 Framework System of University Technology Based Start-Up Development by University Incubator: Case Study<\/a>
\n<\/strong>Wahyudi Sutopo, Research Group of Industrial Engineering and Techno Economy, Industrial Engineering Department, Sebelas Maret University, Indonesia, Surakarta, Indonesia
\nYuniaristanto, Laboratory of Logistic and Business System, Industrial Engineering Department, Sebelas Maret University, Indonesia, Surakarta, Indonesia
\nDanis Eka Prasetya Wicaksana, Laboratory of Logistic and Business System, Agency for Assessment and Application Technology, BPPT, Technology Policy Assessment, Indonesia
\nAnugerah Widiyanto, Research Group of Industrial Engineering and Techno Economy, Agency for Assessment and Application Technology, BPPT, Technology Policy Assessment, Indonesia<\/p>\n

ID 823 \u00a0 Technical Feasibility Battery Lithium to Support Unmanned Aerial Vehicle (UAV): A Technical Review<\/a>
\n<\/strong>Nida An Khofiyah, Department of Industrial Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
\nWahyudi Sutopo, Research Group of Industrial Engineering and Techno-economics, Universitas Sebelas Maret, Surakarta, Indonesia
\nBayu Dwi Apri Nugroho, Department of Agricultural and Biosystems Engineering, Faculty of Agricultural Engineering, Universitas Gadjah Mada, Yogyakarta, Indonesia<\/p>\n

ID 824 \u00a0 Influence of Work Safety and Work Stress on Productivity<\/a>
\n<\/strong>Daswir Lelo, PhD Candidate, Universiti Teknologi Malaysia
\nSha\u2019ri Mohd. Yusof, Razak School Engineering and Advanced Technology, Universiti Teknologi Malaysia
\nJan Horas V. Purba, Sekolah Tinggi Ilmu Ekonomi Kesatuan, Bogor, Indonesia<\/p>\n

ID 825 \u00a0 Internal vs External Green Supply Chain Management at Petrochemical Industry Economic Performance in Indonesia<\/a>
\n<\/strong>Yuary Farradia, Faculty of Technology and Management, Universiti Tun Hussein Onn, Batupahat, Johor , Malaysia
\nAbdul Talib Bin Bon, Faculty of Technology and Management, Universiti Tun Hussein Onn, Batupahat, Johor , Malaysia
\nHari Muharam, Faculty of Economics, Pakuan University, Bogor, Indonesia<\/p>\n

ID 826 \u00a0 Environment Sustainability in Petrochemical Industry in Indonesia<\/a>
\n<\/strong>Yuary Farradia, Faculty of Technology and Management, Universiti Tun Hussein Onn, Batupahat, Johor , Malaysia
\nAbdul Talib Bin Bon, Faculty of Technology and Management, Universiti Tun Hussein Onn, Batupahat, Johor , Malaysia.<\/p>\n

ID 827 \u00a0 Green Marketing Mix Role Toward Sustainability Performance of Petrochemical Industry in Indonesia<\/a>
\n<\/strong>Yuary Farradia, Faculty of Technology and Management, Universiti Tun Hussein Onn, Batupahat, Johor , Malaysia
\nAbdul Talib Bin Bon, Faculty of Technology and Management, Universiti Tun Hussein Onn, Batupahat, Johor , Malaysia<\/p>\n

ID 828\u00a0\u00a0 User-Entity Behavior Analytics (UEBA) \u2013 A Systematic Review of Literatures<\/a>
\n<\/strong>Revanth Filbert Raj I, Department of Management, Amrita Vishwa Vidyapeetham University
\nBangalore, India
\nShekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University
\nBangalore, India<\/p>\n

ID 829 \u00a0 CSR and Social Media Analytics in India<\/a>
\n<\/strong>Arya Sree, Department of Management, Amrita Vishwa Vidyapeetham University, Bangalore, India
\nShekar Babu PhD Department of Management, Amrita Vishwa Vidyapeetham University, Bangalore, India<\/p>\n

ID 830 \u00a0 Vulnerability Management (VM) Analytics \u2013 A Systematic Review of Literatures<\/a>
\n<\/strong>Rahul C. N, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
\nShekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University
\nBangalore, India<\/p>\n

ID 831 \u00a0 Healthcare Social Factors of Companies in India<\/a>
\n<\/strong>Amritha M Nair, Department of Management, Amrita Vishwa Vidyapeetham University
\nBangalore, India
\nShekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India<\/p>\n

ID 832 \u00a0 Social Disclosures using Social Media in India<\/a>
\n<\/strong>Abiram Guruswamy, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
\nShekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India<\/p>\n

ID 833 \u00a0 An Analysis of Indian Companies on Whistle Blowing<\/a>
\n<\/strong>M. Raghuraman, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
\nShekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India<\/p>\n

ID 834 \u00a0 Willful Default or Socially Responsible \u2013 A Study of Indian Banks and Companies<\/a>
\n<\/strong>M. Sathish Kumar, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
\nPrabhavathi.K.,\u00a0School of Humanities and Management,\u00a0National Institute of Technology,\u00a0Tadepalligudam, West Godavari,\u00a0Andhra Pradesh, India
\nShekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India<\/p>\n

ID 835 \u00a0 Comparison of Mandated CSR Performance Models across Various Industries in India<\/a>
\n<\/strong>Kavya Suresh, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
\nShekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India<\/p>\n

ID 836 \u00a0 Develop a Decision Support System (DSS) for Social Activities by Companies in India<\/a>
\n<\/strong>Shushant Pal, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
\nShekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India<\/p>\n

ID 837\u00a0 \u00a0Research on Application of Computer Aided Translation Technology to Translation Teaching<\/a>
\n<\/strong>Lu Juan, School of Education, Universiti Teknologi Malaysia; School of Foreign Studies, Shaanxi University of Technology, China
\nNoraffandy Bin Yahaya, School of Education, Universiti Teknologi Malaysia, Malaysia<\/p>\n

ID 838\u00a0 A Study on Awareness of Block Chain Technology among Human Resources Executives in India<\/a>
\n<\/strong>Vinith Kumar Nair, Marketing & Associate Dean, TKM Institute of Management, Kerala, India
\nMaria Sabastin S., Department of Management, Amrita Vishwa Vidyapeetham, Bengaluru,\u00a0Karnataka, India<\/p>\n

ID 839\u00a0 Knowledge, Attitude and Practices of OSHCIM Implementation Readiness from the Perspective of Clients, Designers and Contractors<\/a>
\n<\/strong>Jafri Mohd Rohani, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nKamarizan Kidam, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nMohammad Ismail, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nHamidah Kamarden, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nSiti Suhaili Suhaili Shalan, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nAnis Amira Mat Zuki, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nAugeny Satik anak Ayak, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nRaja Nor Atikah Raja Azam Shah, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nKherun Nita Ali, Faculty of Built Environment, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nHamizah Liyana Tajul Ariffin, Faculty of Built Environment, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nNorhazren Izatie Mohd, Faculty of Built Environment, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nNur Emma Mustaffa, Faculty of Built Environment, Universiti Teknologi Malaysia, Skudai, Johor Bahru
\nSamsiah Abdullah, Faculty of Built Environment, Universiti Teknologi Malaysia, Skudai, Johor Bahru<\/p>\n

ID 841 Analysis of Course Content Development using Pedagogic Framework \u2013 A Case Study<\/a><\/strong>
\nManoj Kumar Soni and Tamali Bhattacharyya, Birla Institute of Technology and Science, Pilani,\u00a0Rajasthan, India
\nBani Bhattacharya, Indian Institute of Technology, Kharagpur, Khargpur, India<\/p>\n

ID 842 Sorghum-Based Alternative Food Industry: Entrepreneurship High Education<\/a><\/strong>
\nEndang Noerhartati, Department of Agroindustrial Technology, Universitas Wijaya Kusuma Surabaya, Indonesia, Jl. Dukuh Kupang XXV\/54 Surabaya, Indonesia, Postgraduate Student, Department of Education Management, Unesa, Surabaya, Indonesia, Jl. Kampus Ketintang, Surabaya, Indonesia
\nLusy Tunik Muharlisiani, Department of English Education, Universitas Wijaya Kusuma, Surabaya, Indonesia, Postgraduate Student, Department of Education Management, Unesa, Surabaya, Indonesia
\nDewie Tri Wijayati, Yatim Riyanto, Toho Cholik Mutohir, Professor, Department of Education Management, Uneversitas Negeri Surabaya, Indonesia
\nSoedjarwo, Warih Handayaningrum, Moedjito, Lecture, Department of Education Management, Uneversitas Negeri Surabaya, Indonesia
\nAbdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan Universiti Tun Hussein Onn Malaysia (UTHM) Johor, Malaysia<\/p>\n

ID 843 Design and Development of Game Based Evaluation and Learning (GABEL) for Applied Thermodynamics course for Active Learning<\/a><\/strong>
\nManoj Kumar Soni and Tamali Bhattacharya, Birla Institute of Technology and Science (BITS), Pilani, India<\/p>\n

ID 845 Women’s Leadership Policy Strategy: Improving Quality of Education (TQM) In Higher Education<\/a><\/strong>
\nLusy Tunik Muharlisiani, Department of English Education, Universitas Wijaya Kusuma, Surabaya, Indonesia, \u00a0Postgraduate Student, Department of Education Management, Unesa, Surabaya, Indonesia
\nEndang Noerhartati, Department of Agroindustrial Technology, Universitas Wijaya Kusuma Surabaya, Indonesia, Postgraduate Student, Department of Education Management, Unesa, Surabaya, Indonesia
\nDewie Tri Wijayati, Yatim Riyanto, Toho Cholik Mutohir, Professor, Department of Education Management, Universitas Negeri Surabaya, Indonesia
\nSoedjarwo, Warih Handayaningrum, Moedjito, Lecture, Department of Education Management, Uneversitas Negeri Surabaya, Indonesia
\nSiti Bariroh – Universitas Gresik, Indonesia
\nAbdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan Universiti Tun Hussein Onn Malaysia (UTHM) Johor, Malaysia<\/p>\n

ID 846\u00a0DMAIC Approach to Improve on Safety Performance Using Safety Management System in Kuwait International Airport<\/a>
\n<\/strong>Suat Kasap, Alaa Al-Shammari, Nadine Awadah, Zahra\u2019a Kamal, and Sahar Redha,\u00a0Industrial Engineering Department,\u00a0College of Engineering and Technology,\u00a0American University of the Middle East, Kuwait<\/p>\n

ID 855 Control Returnability Inventory Using System Dynamic Modeling and Fuzzy Logic<\/a><\/strong>
\nMuhammad Talha*1, Syed Ahmad Helmi*1,2, Azanizawati Ma\u2019aram*1 and Muhammad Hisjam*3
\n1Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 Johor, Malaysia
\n2Center for Engineering Education, Universiti Teknologi Malaysia, 81200 Skudai, Johor Bahru
\n3Department of Industrial Engineering, Faculty of Engineering, Sebelas Maret University, Surakarta, Indonesia<\/p>\n

\n

\u00a9 IEOM Society International<\/p>\n","protected":false},"excerpt":{"rendered":"

Proceedings – 2019 IEOM Bangkok ISBN: 978-1-5323-5948-4\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 ISSN: 2169-8767 ID 011 Anaerobic Digestion of Kitchen and Sewage Sludge Bio waste to Biogas using Engineered Bio catalysis M. M. Manyuchi, BioEnergy and Environmental Technology Centre, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa Department of Chemical […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-468","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"http:\/\/ieomsociety.org\/ieom2019\/wp-json\/wp\/v2\/pages\/468"}],"collection":[{"href":"http:\/\/ieomsociety.org\/ieom2019\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/ieomsociety.org\/ieom2019\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/ieomsociety.org\/ieom2019\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/ieomsociety.org\/ieom2019\/wp-json\/wp\/v2\/comments?post=468"}],"version-history":[{"count":85,"href":"http:\/\/ieomsociety.org\/ieom2019\/wp-json\/wp\/v2\/pages\/468\/revisions"}],"predecessor-version":[{"id":778,"href":"http:\/\/ieomsociety.org\/ieom2019\/wp-json\/wp\/v2\/pages\/468\/revisions\/778"}],"wp:attachment":[{"href":"http:\/\/ieomsociety.org\/ieom2019\/wp-json\/wp\/v2\/media?parent=468"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}