{"id":33,"date":"2018-06-29T05:01:34","date_gmt":"2018-06-29T05:01:34","guid":{"rendered":"http:\/\/ieomsociety.org\/pilsen2019\/?page_id=33"},"modified":"2019-07-11T19:58:07","modified_gmt":"2019-07-11T19:58:07","slug":"industry-solutions","status":"publish","type":"page","link":"http:\/\/ieomsociety.org\/pilsen2019\/industry-solutions\/","title":{"rendered":"Industry Solutions"},"content":{"rendered":"

IEOM Industry Solutions<\/span>
\n<\/strong><\/h1>\n

Pilsen, Czech Republic
\nJuly 23-26, 2019<\/h2>\n
\n

IEOM Industry Solutions sessions will showcase the industrial case studies and their impacts of the industrial solutions using IE \/ OM tools and techniques (lean, six sigma, FMEA, simulation, design of experiments, optimization, TOC, PLM, CAE, statistical analysis, safety, reliability, etc). IEOM 2019 Pilsen Conference will have a dedicated session for the Industry Solutions where distinguished practitioners provide their presentations including their experiences and journey to be successful. Speakers will be from various part of the world to address industrial challenges and opportunities for continuous improvement and sustainability.<\/p>\n

Each speaker needs to submit a title of the talk, photo, and a short bio. All will be included in the 2019 IEOM Pilsen Conference proceedings.\u00a0If you are interested to be an industry speaker, please submit online submission form. For questions, please contact info@ieomsociety.org<\/a>.<\/p>\n

\"\"<\/p>\n

\n

IEOM Industry Solutions Chairs<\/strong><\/p>\n

\n

Distinguished Industry Solutions Speakers<\/strong><\/span><\/h1>\n
\n

Session I: Industry Solutions<\/b>
\n<\/strong>8:00 \u2013 9:30 am<\/strong> (Tuesday) – Room 2
\n<\/strong>Session Chair: <\/strong>\u00a0Dr. Sharif, Indian Institute of Technology Kanpur, India<\/strong><\/span><\/p>\n

8:00 \u2013 8:30 (Tuesday) – Room 2<\/strong><\/p>\n

Luis A. Mendoza del Villar
\n<\/strong>Posgrado en Ingenier\u00eda de Sistemas<\/span>
\nInstituto Polit\u00e9cnico Nacional<\/span>
\nMexico City, Mexico<\/span><\/p>\n

Luis A. Mendoza del Villar is a Ph.D. Student, and researcher assistant in the National Polytechnic Institute (IPN) in Mexico He earned B.S. in Industrial Engineering from IPN-UPIICSA, Mexico, Masters in Industrial Engineering from Postgrad & Research Section (SEPI) in the same academic unit, candidate of PhD program of Systems Engineering from Superior School of Mechanical and Electrical Engineering (ESIME z), Mexico. Research state visiting in University of Derby in 2019, UK. Master Luis\u2019s work experience in engineering consultancy of material handling for bulk material and unit products with Johnson Controls, Nestle, All tube, the Coca Cola company, Bayer, among others. His research interests include sustainability, industrial development, Productivity, Innovation, manufacturing, and I 4.0. He is a member of the Latin America Systemic Association (ALAS).<\/p>\n

ID 559: Towards Sustainable Industrial Development – A Systems Thinking-Based Approach<\/strong><\/p>\n

Luis A. Mendoza-del Villar and Eduardo Oliva-L\u00f3pez, Posgrado en Ingenier\u00eda de Sistemas, Instituto Polit\u00e9cnico Nacional, Mexico City, Mexico
\nOctavio Luis-Pineda, Econom\u00eda, Instituto Polit\u00e9cnico Nacional, Mexico City, Mexico
\nJose Arturo Garza-Reyes, Centre for Supply Chain Improvement, University of Derby, Derby, UK<\/p>\n

\n

8:45 \u2013 9:10 (Tuesday) – Room 2<\/strong><\/p>\n

Dr. Abdul Talib Bon
\n\"\"Professor of Technology Managemen
\nDepartment of Production and Operations Management
\n<\/strong>Universiti Tun Hussein Onn Malaysia<\/strong><\/span><\/p>\n

Optimization techniques for transportation problems in warehouse of a furniture industry using Arena simulation<\/strong><\/span><\/p>\n

Dr. Abdul Talib Bon is Professor of Technology Management in Department of Production and Operations Management, Faculty of Technology Management and Business at the Universiti Tun Hussein Onn Malaysia.\u00a0 He has a PhD in Computer Science, which he obtained from the Universite de La Rochelle, France in the year 2008. His doctoral thesis was on topic Process Quality Improvement on Beltline Moulding Manufacturing. He studied Business Administration major in Quality Management at the master\u2019s level in the Universiti Kebangsaan Malaysia for which he was awarded the MBA in the year 1998. He\u2019s bachelor degree and diploma in Mechanical Engineering which his obtained from the Universiti Teknologi Malaysia.\u00a0 He received his postgraduate certificate in Mechatronics and Robotics from Carlisle, United Kingdom in 1997. He is Director of Teaching Factory and Manager of Centre for Technology (Furniture Innovation Technology) from 1 September 2016 and Head of Program Bachelor of Technology Management (Furniture Design and Manufacturing) with Honours from 2014 until 2017. Before this he was the Deputy Dean (Research and Development) at the Faculty of Technology Management and Business in the Universiti Tun Hussein Onn Malaysia from 2008 until December 2011. Dr. Abdul Talib Bon has had over 30 year experience of teaching in higher learning education. A major part of his teaching experience involves teaching mechanical engineering students in polytechnics.\u00a0 However, from the year 1999, he was given the opportunity to be jointed in the Institut Teknologi Tun Hussein Onn (ITTHO), Universiti Teknologi Malaysia as a lecturer in Mechanical Engineering Department. In this institute, he teaches engineering management and quality control at the under-graduate level. Dr. Abdul Talib Bon has multidisciplinary research interests that encompass industrial engineering, quality management and production and operation management.\u00a0 His completed 17 research grant projects as project leader include applications of forecasting in industries. His current research project is looking into developing process quality improvement (PQI) in manufacturing industries. He has supervised more than 90 undergraduate and postgraduate research projects. He has served as a reviewer for a number of engineering management and computer science conferences and journals as part of his expertise sharing initiatives. He had published more than 180 International Proceedings and International Journals and 8 books. He is also Fellow and President of Industrial Engineering and Operation Management Society (IEOMS, Malaysia), Professional Technologist\u00a0 of Malaysia Board of Technologists (MBOT), Council member of Management Science and Operation Research Society of Malaysia (MSORSM), member of International Association of Engineers (IAENG), member of Institute of Industrial Engineer (IIE), USA, member of International Institute of Forecasters (IIF), member of Technological Association of Malaysia (TAM) and associate member of Malaysian Institute of Management (AMIM).<\/p>\n

9:10 \u2013 9:30 (Tuesday) – Room 2<\/strong><\/p>\n

Dr. Sharif<\/span><\/strong>
\nHead, I.A. Department<\/span>
\nIndian Institute of Technology Kanpur <\/span>
\nIndia<\/span><\/p>\n

\"\"<\/p>\n

Dr. Sharif<\/strong> has been working with Indian Institute of Technology Kanpur for the past 18 years. He has professionally and academically specialized in the areas of Operations Management and applying the tools of expertise for quantitative and qualitative controls over the Inventory management. He has a Ph. D degree and his area of specialization is Operations Management. He has many publications in national and international journals to his credit. He has also authored a book titled \u201cMaterials and Purchase Management; Theory and Practice published by Narosa Publishing Pvt. Ltd. New Delhi in the year 2016. He has received 5 awards for his research publications.<\/p>\n

\n

9:30 Welcome Address – Dr. Miroslav Hole\u010dek<\/strong>, Rector, University of West Bohemia, Pilsen, Czech Republic<\/p>\n

9:40 – 10:20 (Tuesday): Opening Keynote I – Dipl. Ing. Wolfgang Weissler<\/strong>, CEO Digital Factory & Process Industries and Drives, Siemens Czech Republic \u2013 Ballroom<\/p>\n

10:20 – 11:00 (Tuesday): Opening Keynote II – Prof. Ing. Josef Basl<\/strong>, CSc., Department of Industrial Engineering and Management, Faculty\/Institute of Faculty of Mechanical Engineering, University of West Bohemia, Pilsen, Czech Republic \u2013 Ballroom<\/p>\n

\n

Session II: Industry Solutions – Industry Best Practices<\/span><\/b>
\n<\/strong>11:30 am \u2013 1:00 pm (Tuesday) – Room 2
\n<\/strong><\/span>Session Chair: <\/span>Dr. Luis Rocha Lona, National Polytechnic Institute of Mexico, Mexico City, Mexico<\/span><\/span><\/strong><\/p>\n

11:30 \u2013 12:00 (Tuesday) – Room 2<\/p>\n

Itumeleng Gladwell Motlhatlhedi
\n<\/strong><\/span>Postgraduate School of Engineering Management
\n<\/span>Faculty of Engineering and the Built Environment
\n<\/span>University of Johannesburg
\n<\/span>South Africa<\/span><\/p>\n

Mr. Itumeleng Motlhatlhedi is a Technologist and he is a registered Professional Engineering Technician (Pr Techni Eng) with ECSA and has over 7 years\u2019 experience in the rail environment with specialization in Overhead Traction Equipment (OHTE), Traction substations and Distribution substations. His experience has led to specialized knowledge of the variety of OHTE designs applied to 3kV DC and 25kV AC systems across South Africa. He is currently working as a Technologist in a railway consultancy company called R&H Rail (Pty) Ltd.<\/p>\n

ID 165 Investigation of Project Delay in Construction Projects in the South African Rail Industry<\/strong>
\nItumeleng Gladwell Motlhatlhedi,\u00a0Hannelie Nel, Postgraduate School of Engineering Management Faculty of Engineering, the Built Environment University of Johannesburg South Africa<\/p>\n

\n

12:00 \u2013 12:30 (Tuesday) – Room 2<\/p>\n

Roya Derakhshanalavijeh
\n<\/strong><\/span>Department of Management, Economics and Industrial Engineering
\n<\/span>Politecnico di Milano
\n<\/span>Via Lambruschini 4 \u2013 20156 Milan, Italy<\/span><\/p>\n

Prof. Mauro Mancini
\n<\/strong><\/span>Associate Professor
\n<\/span>Department of Management, Economics and Industrial Engineering
\n<\/span>Politecnico di Milano
\n<\/span>Italy<\/span><\/p>\n

\"\"<\/p>\n

Mauro Mancini is associate professor at the Department of Management, Economics and industrial Engineering and teaches Project Management and Industrial Plants at master degree programs and post graduate programs (at MIP). He is Director of an international Master in Project Management (past director of Executive Master in nuclear Plant Construction Management and in master in Strategic Project Management European) and member of ANIMP (Italian Association Industrial Plant Engineering). Vice-director of Corporate Relations at MIP Business School of Politecnico di Milano. Research topics: Project Management, Megaprojects and Building Information Modelling applied in different industrial sector like Energy (with special focus on nuclear, Oil and Gas and renewables), Construction and infrastructures.<\/p>\n

ID 408 Rebuilding Organization\u2019s Legitimacy in the Eyes of Local Community; Case Study of Oil and Gas Megaprojects
\n<\/strong>Derakhshanalavijeh,\u00a0Mauro Mancini,\u00a0Department of Management, Economics and Industrial Engineering, Politecnico di Milano, Milan, Italy<\/p>\n

\n

12:30 \u2013 1:00 (Tuesday) – Room 2<\/p>\n

Jay Daniel<\/strong><\/span>
\nDerby Business School<\/span>
\n University of Derby<\/span>
\nDerby, UK<\/span><\/p>\n

\"\"<\/p>\n

Jay Daniel is a Senior Lecturer in the Derby Business School at University of Derby, United Kingdom. Before joining the Derby Business School, he was a Lecturer (Assistant Professor) in Supply Chain and Information Systems at University of Technology Sydney (UTS), Australia. Previously with DB Schenker, Australia, and Alliance International Registrar, Asia Pacific, Jay held positions of Senior Management Consultant, Supply Chain Solution Analyst, Project Manager, Industry Trainer and Lead Auditor. Dr. Daniel is actively engaged in teaching, research, and consulting on sustainable supply chain and information systems themes. His research is funded by Government agencies and industry collaborators, focusing on Sustainable Supply Chain, Business Analytics, Information Systems, and Decision Support Systems.\u00a0<\/span><\/span><\/p>\n

\n

1:00 – 2:30 Lunch Keynote – Dr. Zain Tahboub<\/strong>, Chief Advisor, Dubai Aviation Engineering Projects, Dubai, United Arab Emirates – Industrial Engineering and the Fourth Industrial Revolution: Education and Skills \u2013 Ballroom<\/p>\n

\n

Session III: Industry Solutions – Circular Economy<\/span>
\n<\/strong>2:30 \u2013 4:00 pm (Tuesday) – Room 2
\n<\/strong>Session Chair: <\/strong><\/span>\u00a0Simon Peter Nadeem, University of Derby, U.K.<\/strong><\/p>\n

2:30 \u2013 2:50 (Tuesday)<\/p>\n

Yinping Mu
\n<\/strong><\/span>School of Management and Economics
\n<\/span>University of Electronic Science and Technology of China
\n<\/span>Chengdu 610054, China<\/span><\/p>\n

ID 156 Exchange Rate Risk Hedging for a Global Supply Chain of Nonstorable Commodity in Presence of a Spot Market
\n<\/strong>Yinping Mu, University of Electronic Science and Technology of China, China
\nXiaoqiang Cai, The Chinese University of Hong Kong, Shenzhen, the Shenzhen Research Institute of Big Data, Guangdong, China
\nXiaowo Tang, School of Management and Economics, University of Electronic Science and Technology of China, China<\/p>\n

\n

2:50 \u2013 3:10 (Tuesday)\u00a0<\/strong><\/p>\n

Georgy Klushin
\n<\/strong>Center for Entrepreneurship and Innovation<\/span>
\nSkolkovo Institute of Science and Technology<\/span>
\nSkolkovo Innovation Center, Bolshoy Boulevard 30, building 1<\/span>
\nMoscow 121205, Russia<\/span><\/p>\n

ID 119 Between Modularity, Imitation and Intellectual Property: The Role of Patent Protection, A Review<\/strong>
\n<\/strong>Georgy Klushin, Skolkovo Institute of Science and Technology, Russia<\/p>\n

\n

3:10 \u2013 3:30 (Tuesday)\u00a0<\/strong><\/p>\n

Dr. Agung Sutrisno
\n<\/strong>Assistant Professor <\/span>
\nDepartment of Mechanical Engineering <\/span>
\nSam Ratulangi University<\/span>
\nManado, Indonesia\u00a0<\/span><\/p>\n

Agung Sutrisno is an assistant professor in the Department of Mechanical Engineering at Sam Ratulangi University, Manado, Indonesia. He earned B.E. in Metallurgical Engineering and M.Eng in Manufacturing Engineering from University of Indonesia in 1999 and 2001. His PhD Degree in Systems Management and Engineering obtained from Pukyong National University in 2012. He has published papers in peer reviewed conference and Journals. His research interests are in Quality and Reliability Management, Supply Chain and Operations Management and Sustainability Engineering.\u00a0<\/strong><\/p>\n

ID 174\u00a0\u00a0\u00a0\u00a0 Categorization of Supply Chain Sustainability Risks in SMEs: A Preliminary Evidence from a Developing Country<\/strong><\/p>\n

Agung Sutrisno, Charles Punuhsingon, Department of Mechanical Engineering, Sam Ratulangi University, Manado, Indonesia
\nVikas Kumar, Bristol Business School, University of the West of England, Bristol, United Kingdom
\nDwi Handayani, Department of Industrial Engineering, Universitas Islam Indonesia, Yogjakarta, Indonesia
\nRudi K. Arief, Department of Mechanical Engineering, Universitas Muhammadiyah Sumatera Barat, Bukit Tinggi, Indonesia
\nShinta Virdhian, Balai Besar Logam dan Mesin, Jl. Sangkuriang, Indonesia<\/p>\n

\n

3:30 \u2013 4:00 (Tuesday)\u00a0<\/strong><\/p>\n

Simon Peter Nadeem
\n<\/strong>Lecturer <\/span>
\nCollege of Business, Law and Social Sciences<\/span>
\nCentre for Supply Chain Improvement <\/span>
\nUniversity of Derby, U.K.<\/span><\/p>\n

\"\"<\/p>\n

Circular Economy practices in manufacturing sector \u2013 a case study<\/em><\/strong><\/span><\/p>\n

Simon Peter Nadeem <\/strong>is a Lecturer in the College of Business, Law and Social Sciences, and is associated with Centre for Supply Chain Improvement at the University of Derby, U.K. He has recently completed his PhD in the area of Operations Management with a focus on Circular Economy. As an early career researcher, he has published in high ranking peer-reviewed scientific journals such as International Journal of Production Research (IJPR) and Production Planning and Control (PPC). He has presented and published in International Conferences such as POMS, APMS, INCOM, IEOM and has contributed chapters and case studies in books. Simon\u2019s research focus and expertise are in the areas of Circular Economy, Lean, Operations Management, Business Process Improvements, Sustainability, and Innovation. Formerly Simon has worked in administrative roles in the management of healthcare institutions. Alongside his research and teaching responsibilities, Simon is actively engaged with transport sector industries through the project Enscite, to conduct analysis on their operations and provide consultation for optimisations and improvements.<\/p>\n

\n

Session VI:<\/strong> Industry Solutions
\n<\/strong>4:30 \u2013 6:00 pm (Tuesday) – Room 2
\n<\/strong>Session Chair: <\/strong><\/span>\u00a0Jo\u00e3o Basto, INESC TEC \u2013 Technology and Science, Faculty of Engineering, University of Porto, Porto, Portugal<\/strong><\/p>\n

Sustainable Operations and Supply Chain Management Technical Session<\/strong><\/span>\u00a0<\/strong><\/p>\n

ID 122 \u00a0\u00a0\u00a0 Understanding supply chain resilience: a dynamic approach using theory of constraints current reality tree\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/strong><\/p>\n

Mohamed Hicham Salah Eddine, Abdelaziz Berradou, Research team AMIPS, Mohammed V University of Rabat, Morocco
\nTarik Saikouk, International logistics and supply chain department, International University of Rabat, Morocco
\n<\/strong><\/p>\n

ID 194 \u00a0\u00a0\u00a0 The Relationship between Price Satisfaction, Non-financial and Financial Performance
\n<\/strong>Aries Susanty, Atika Andriyani, Industrial Engineering Department, Diponegoro University, CampusTembalang, Indonesia\u00a0<\/strong><\/p>\n

ID 228 \u00a0\u00a0\u00a0 Integrating Production Assessment with PPAP \u2013 A QFD Approach
\n<\/strong>Chi-Shuan Liu,\u00a0Horng-Chyi Horng,\u00a0Department of Industrial Engineering and Management, Chaoyang University of Technology, Taichung, Taiwan\u00a0<\/strong><\/p>\n

ID 241 \u00a0\u00a0\u00a0 Challenges in managing oil and gas supply chain \u2013 An exploratory study<\/strong>Masha Menhat, Jagan Jeevan, Izyan Munirah Mohd Zaideen,\u00a0School of Maritime Business and Management, University of Malaysia Terengganu, 21030 Kuala Terengganu, Terengganu, Malaysia
\nYahaya Yusuf,\u00a0Lancashire Business School,\u00a0University of Central Lancashire, Preston, Lancashire, UK\u00a0<\/strong><\/p>\n

ID 244 \u00a0\u00a0\u00a0 Optimal Design of Additive Manufacturing Supply Chains
\n<\/strong>Jo\u00e3o Basto, Jos\u00e9 Soeiro Ferreira, INESC TEC \u2013 Technology and Science, Faculty of Engineering, University of Porto, Porto, Portugal
\nSymone G. S. Alcal\u00e1, Faculty of Sciences and Technology, Federal University of Goi\u00e1s, Aparecida de Goi\u00e2nia, Goi\u00e1s, Brazil
\nEnzo Frazzon, Industrial and Systems Engineering Department, Federal University of Santa Catarina, Florian\u00f3polis, Brazil
\nSamuel Moniz, Department of Mechanical Engineering, University of Coimbra, Coimbra 3030-788, Portugal<\/p>\n

\n

Session V: Industry Solutions
\n8:00 \u2013 9:30 am (Wednesday) – Room 2
\nSession Chair:\u00a0\u00a0E. Innocents Edoun, University of Johannesburg, Pretoria, Gauteng, South Africa<\/strong><\/span><\/p>\n

Energy Technical Session<\/strong><\/span><\/p>\n

ID 178 \u00a0\u00a0\u00a0 The Masking Effect due to Industrial Noise and Applying the Method of the Level of Interference with Speech\u00a0\u00a0\u00a0 <\/strong><\/p>\n

Abderrezak Hocine, Mechanical Engineering Research Laboratory, Badji Mokhtar Annaba University, Algeria
\n<\/strong><\/p>\n

ID 018 \u00a0\u00a0\u00a0 Adoption of Eco cook stoves as a Way of Improving Energy Efficiency\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/strong><\/p>\n

Mercy Manyuchi, University of Johannesburg, Johannesburg, South Africa\u00a0<\/strong><\/p>\n

ID 068 \u00a0\u00a0\u00a0 Application of Multilayer Perceptron Neural Network Model for Predicting Industrial Sector\u2019s Energy Consumption\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/strong><\/p>\n

Oludolapo Olanrewaju, Durban University of Technology, Durban\u00a0NA, South Africa
\n<\/strong><\/p>\n

ID 110 \u00a0\u00a0\u00a0 An Integrated Statistical Long-Term Energy Modelling for Sustainable Energy Mix in Pakistan
\n<\/strong>Muhammad Ali Shakir, University of Sargodha, Pakistan
\nImran Zahid, Department of Mechanical Engineering, Government College University, Faisalabad, Pakistan\u00a0<\/strong><\/p>\n

ID 136 \u00a0\u00a0\u00a0 Steady State, Transient and Harmonic Behavior Analysis of Home Appliances\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/strong><\/p>\n

Abdul Sattar Larik, Mukhtiar Ahmed Mahar, Department of Electrical Engineering, Mehran University of Engineering and Technology, Sindh, Pakistan\u00a0<\/strong><\/p>\n

ID 151 \u00a0\u00a0\u00a0 Towards an Efficient Residential Electricity Consumption: An Assessment of the Effectiveness of Residential Electricity Efficiency-Incentive Subsidies Reform in Saudi Arabia
\n<\/strong>Ramzi Alahmadi, Department of Industrial Engineering Taibah University AL Madinah, Saudi Arabia\u00a0<\/strong><\/p>\n

ID 201 \u00a0\u00a0\u00a0 Wind Energy: A Case Study on Wind Power as an Alternative Source of Renewable Energy
\n<\/strong>E. Innocents Edoun, Professor C Mbohwa, Mrs Thobile Yvonne Bhila,\u00a0University of Johannesburg, Pretoria, Gauteng, South Africa<\/p>\n

\n

9:40 – 10:20 Wednesday Keynote I: Dr. Seifedine Kadry<\/strong>, Professor of Applied Statistics, Director of Applied Statistics Center, Coordinator of Continuing Education Program (CPE), Beirut Arab University, Lebanon \u2013 Ballroom,<\/p>\n

10:15 – 11:00 Wednesday Keynote II: Petr Nekoln\u00fd<\/strong>, Valeo, Prague, Czech Republic – Ballroom<\/p>\n

\n

Session VI: Industry Solutions
\n<\/strong>11:30 am \u2013 1:00 pm (Wednesday) – Room 2
\n<\/strong><\/span>Session Chair:<\/span> Priyanka C. Bhatt, Bennett University, Times of India Group, India<\/strong><\/p>\n

e-Business \/ e-Service \/ e-Commerce Technical Session<\/span><\/strong><\/p>\n

ID 285 \u00a0\u00a0\u00a0 The Impact of Consumer Return Strategies on Omnichannel Retailing\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <\/strong>
\nPrasenjit Mandal,\u00a0Department of Operations Management, Indian Institute of Management Calcutta, Kolkata, 700104, India\u00a0<\/strong><\/p>\n

ID 454 \u00a0\u00a0\u00a0 Marketing Mavens and Consumer Switching Behavior: Changing roles in E-Services\u00a0\u00a0 <\/strong><\/p>\n

Anjali Sharma, R.R.K. Sharma,\u00a0Dept. of Industrial & Management Eng., Indian Institute of Technology-Kanpur, India\u00a0<\/strong><\/p>\n

ID 277 \u00a0\u00a0\u00a0 SAP System Implementation: A Case Study in a Public Institution of Turkey <\/strong><\/p>\n

Zeynep Caglar, Adnan Corum, Department of Industrial Engineering, Bahcesehir University, Istanbul, Turkey<\/p>\n

ID 138 \u00a0\u00a0\u00a0 Technology Management and Adoption for Different E-tailer Formats: A Conceptual Framework<\/strong>
\nVinayak A. Drave and R.R.K. Sharma,\u00a0Department of Industrial Engineering, Indian Institute of Technology, Kanpur, India
\nPriyanka C. Bhatt, Learning Resource Centre, Bennett University, Times of India Group, India
\nSharif, IIT Kanpur, India<\/p>\n

\n

1:00 – 2:30, Wednesday Lunch Keynote: Roman \u017d\u00e1k<\/strong>, Chairman of the Board, Aimtec, Pilsen, Czech Republic- Ballroom<\/p>\n

\n

Session VII: Industry Solutions – WIIA Panel Session<\/strong>
\n2:30 \u2013 4:00 pm (Wednesday) – Room 2
\nPanel Session Chair:\u00a0 Ing. Denisa Hru\u0161eck\u00e1, Ph.D., Tomas Bata University in Zl\u00edn, Zl\u00edn, Czech Republic<\/span><\/p>\n

Women in Industry and Academy (WIIA) Panel Session<\/span><\/h2>\n

Panel Chair<\/span><\/p>\n

Ing. Denisa Hru\u0161eck\u00e1, Ph.D.
\n<\/strong>HEAD OF DEPARTMENT<\/span>
\nDepartment of Industrial Engineering and Information Systems<\/span>
\nFaculty of Management and Economics<\/span>
\nTomas Bata University in Zl\u00edn, Czech Republic<\/span><\/p>\n

Panel Speaker I<\/p>\n

Laila EL ABBADI,<\/strong> Ph.D. <\/span>
\nProfessor of industrial engineering <\/span>
\nNational School of Applied Sciences of Kenitra (ENSA-Kenitra)<\/span>
\nUniversity Ibn Tofail<\/span>
\nMorocco<\/span><\/p>\n

Laila EL ABBADI,<\/strong> Ph.D. is a professor of industrial engineering at the National School of Applied Sciences of Kenitra (ENSA-Kenitra), University Ibn Tofail, Morocco and a member of the Systems Engineering Laboratory attached to the same university. Her research focuses on Lean Manufacturing, production systems, quality management, Industry 4.0 and quality assurance in higher education.<\/p>\n

Panel Speaker II<\/p>\n

Priyanka C. Bhatt<\/strong> <\/span>
\nProfessional Assistant <\/span>
\nBennett University<\/span>
\nTimes of India Group<\/span>
\nGreater Noida, India<\/span><\/p>\n

\"\"<\/p>\n

Ms. Priyanka C. Bhatt is currently working as Professional Assistant at Bennett University, Bennett Coleman Co. Ltd., Greater Noida, India. She has an extensive experience of more than 4.5 years in area of computer engineering and information science. She has worked with institutes of national importance like SIDBI, IIT Kanpur; Homi Bhabha Centre for Science Education \u2013 Tata Institute of Fundamental Research, Mumbai; and National Medical Library, New Delhi. \u2018e-services\u2019 initiated by her at National Medical Library, New Delhi received appreciation from the Honorable Minister of Health and Family Welfare, Govt. of India, Dr. J.P. Nadda in 2016. She has more than five research contributions in international conferences and has published two books. Research areas of her publications include, social network analysis, data mining, cloud computing, ICT applications, etc.<\/p>\n

Panel Speaker III<\/p>\n

Dr. Hannelie Nel
\n<\/strong>Senior Lecturer, Postgraduate School of Engineering Management<\/span>
\nFaculty of Engineering and the Built Environment<\/span>
\nUniversity of Johannesburg<\/span>
\nSouth Africa<\/span><\/p>\n

\"\"<\/p>\n

Dr. Hannelie Nel is a Senior Lecturer at the Postgraduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg. She holds a Doctorate in Engineering Management with twenty years\u2019 experience in both industry and academia. Dr Nel is an Honorary Fellow of the Southern African Society for Industrial Engineering and currently serves on the Boards of Denel and the Society for Engineering Education. She is a registered professional engineer with the Engineering Council of South Africa; an Associate Member of the Institute of Directors; and a Member of the International Women\u2019s Association.<\/p>\n

\n

Session VIII: Industry<\/strong> Solutions – Industry Solutions
\nPanel Session on Supply Chain Sustainability<\/span>
\n<\/strong>4:30 \u2013 6:00 pm (Wednesday) – Room 2<\/strong><\/span>\u00a0<\/strong><\/p>\n

Panel Chair: Professor Jose Arturo Garza-Reyes, University of Derby, UK<\/strong><\/p>\n

Professor Jose Arturo Garza-Reyes, Ph.D.
\n<\/strong>Professor of Operations Management<\/span>
\nHead of the Centre for Supply Chain Improvement<\/span>
\nCollege of Business, Law and Social Sciences<\/span>
\nUniversity of Derby, UK<\/span><\/p>\n

Editor-in-Chief, International Journal of Industrial Engineering and Operations Management (IJIEOM)<\/p>\n

\"\"<\/p>\n

Prof. Jose Arturo Garza-Reyes is a Professor of Operations Management and Head of the Centre for Supply Chain Improvement at the College of Business, Law and Social Sciences, University of Derby, UK. He is actively involved in industrial projects where he combines his knowledge, expertise and industrial experience in operations management to help organisations achieve excellence in their internal functions and supply chains. He has also led and managed international research projects funded by the European Union, British Academy, British Council and Mexico\u2019s National Council of Science and Technology (CONACYT). As a leading academic, he has published over 120 articles in leading scientific journals, international conferences and five books in the areas of operations management and innovation, manufacturing performance measurement and quality management systems. Areas of expertise and interest for Professor Garza-Reyes include general aspects of operations and manufacturing management, business excellence, quality improvement, and performance measurement. He is a Chartered Engineer (CEng), a certified Six Sigma-Green Belt, and has over eight years of industrial experience working as Production Manager, Production Engineer and Operations Manager for several international and local companies in both the UK and Mexico. He is also a fellow member of the Higher Education Academy (FHEA) and a member of the Institution of Engineering Technology (MIET).<\/p>\n

Panel Speakers<\/em><\/strong>\u00a0<\/em><\/strong><\/p>\n

Dr. Vikas Kumar
\n<\/strong>Professor of Operations and Supply Chain Management<\/span>
\nDirector of Research and Scholarship<\/span>
\nBristol Business School<\/span>
\nUniversity of the West of England (UWE)<\/span>
\nBristol, UK<\/span><\/p>\n

\"\"<\/p>\n

Vikas Kumar is a Professor of Operations and Supply Chain Management and Director of Research & Scholarship at Bristol Business School, University of the West of England, UK. He holds a PhD degree in Management Studies from University of Exeter, UK. He has published more than 170 peer-reviewed articles in leading International journals and International conferences including the Journal of Business Research, International Journal of Production Research, Supply Chain Management: an International Journal, Expert System with Applications, International Journal of Production Economics, and Production Planning & Control. He serves on the editorial board of a number of international journals including The Int. J. of Industrial Engineering and Operations Management, Int. J. of Services, Economics and Management, Int. J. of Manufacturing Systems, and Int. J. of Lean Enterprise Research. He has successfully secured funding in the excess of \u00a31 million from various research agencies such as EPSRC, Innovate UK, British Academy, Newton Fund and British Council. His current research interests include Sustainability, Circular Economy, Food Supply Chains, Operational Excellence, and Business Model Innovation.<\/p>\n

Dr. Ji\u0159\u00ed Tupa
\n<\/strong>Vice Dean for Faculty Development<\/span>
\nFaculty of Electrical Engineering<\/span>
\nUniversity of West Bohemia<\/span>
\nPilsen, Czech Republic<\/span><\/p>\n

\"\"<\/p>\n

Jiri Tupa received his MSc (2002) and PhD (2006) in Electrical Engineering from Faculty of Electrical Engineering, University of West Bohemia in Pilsen in Czech Republic. He is a Vice-dean of faculty and Senior Lecturer at Department of Technologies and Measurement. Dr. Tupa is member of executive management at Regional Innovation Centre for Electrical Engineering of the Faculty of Electrical Engineering at the University of West Bohemia in Pilsen. He is also PhD supervisor, reviewer of journal and conference publications and co-organizer of conferences. His research interests include Business Process Management, Quality Management, Risk and Performance Management in Electrical Engineering Industry, Industrial Engineering, Electronics Manufacturing and Diagnostics, Financial and Project Management, Copyrights and patents law, information law and transfer of IPR. Jiri Tupa is responsible for several international research and development projects with industrial and University partners. The project RiMaCon – Risk Management Software System for SMEs in the Construction Industry is one of the important international projects. This project has received funding from the European Union\u2019s Seventh Framework Program for research; technological development and demonstration (2013-2017). The RiMaCon project\u2019s main goal is to implement a collaborative effort to promote the sharing of knowledge and competencies in a long-term strategic research partnership around the development, testing and validation of a cost effective and user-friendly risk management system for SMEs in the construction sector.<\/p>\n

Dr. Luis Rocha Lona
\n<\/strong>Lecturer in Operations Management, Business School<\/span>
\nNational Polytechnic Institute of Mexico<\/span>
\nM\u00e9xico City, Mexico<\/span>
\nTec de Monterrey, Campus Santa Fe<\/span><\/p>\n

\"\"<\/p>\n

Luis Rocha-Lona is a Lecturer in Operations Management at the Business School at National Polytechnic Institute of Mexico and at Tec de Monterrey, Campus Santa Fe. Luis Rocha graduated from the National Polytechnic Institute of Mexico (IPN) as Automation Control Systems Engineer. Then, he pursued an MSc in Control Systems with a major in information systems\/manufacturing at the University of Sheffield, UK. He holds a PhD in Operations Management from The Manchester Business School. Dr Luis Rocha-Lona has eight years of working experience in the public and private sectors. He has lead several projects involved with service and manufacturing organisations and is currently supervising Master and PhD students at National Polytechnic Institute of Mexico.<\/p>\n

\n

Session IX: Industry Solutions
\nIndustry 4.0<\/span>
\n<\/strong>8:00 \u2013 9:30 am<\/strong> (Thursday) – Room 2
\n<\/strong>Session Chair: <\/strong>\u00a0Dr. Mohammed Alkahtani, King Saud University, RIYADH, Saudi Arabia<\/strong><\/span><\/p>\n

8:00 \u2013 8:30 (Thursday) \u2013 Room 2<\/p>\n

\"\"Dr. William S. Edwards, Ph.D., PE, PMP
\n<\/strong>Faculty, ISE Department<\/span>
\nOakland University<\/span>
\nRochester, Michigan, USA<\/span><\/p>\n

Dr. William Edwards; PhD, PE, PMP started his career at Ford Motor Company Engine Design While at Ford Motor Company Dr Edwards won one of Ford\u2019s Highest Honors \u2013 The Ford Customer Driven Quality Award for a 79% Reduction in Warranty. This Award along with a Complexity Reduction Award saved Ford Motor Company Money, Warranty Cost, Improved Quality, and Increased Customer Satisfaction. In 1997, he accepted a Promotion to Chrysler Engine Design to work on an International Engine Program with BMW building an Engine Plant in Brazil. The Engine Won one of Ward\u2019s AutoWorld Top 10 Engine Awards and had the Best Warranty in the BMW line up. Next Dr Edwards led change in Chrysler\u2019s Advance Manufacturing Engineering Division. There he led a SWAT Team of Engineers across North America to quickly Identify Manufacturing Issues and Implement resolutions. He instructed all Level of Chrysler Engineering and Production in Process Improvements and \u201cTrained the Trainers\u201d. Along the way, he secured his MSME to go with his BSME\/BSEE. Beyond Formal Degreed Education, Dr Edwards was instructed by Dr Heywood – Massachusetts Institute of Technology (MIT) in Engine Combustion, Diesel Research Technology from the University of Wisconsin, and Lean Manufacturing by a disciple of Taiichi Ohno \u2013 the Father of the Toyota Production System. Dr Edwards also acquired his Professional Engineering License (P.E. License) and his Project Management Professional (PMP) Certification. In 2008, he took a leave of absence from the Automotive World to pursue his PhD. In 2011, he joined the Oakland University Industrial, Systems, & Engineering Management Staff. Dr Edwards brings 20 years of Background and Industry Connections to Oakland University to share with Students and Faculty. His research is in Optimizing Production Efficiencies.\u00a0Dr Edwards consults in Manufacturing, Healthcare, runs Lean Workshops, and Instructs PMP Certification Classes. Dr Edwards is glad share his Unique Background and Talents with University Faculty and Students, Career Development Professionals, and the surrounding community.<\/p>\n

ID 386: \u00a0\u00a0 The Move It Forward Theory (MIFT) Offers a Better Method to Manage Major Machine Failure in a Serial Flow Line
\n<\/strong>William Edward, Sankar Sengupta and Michael Latcha, Oakland University, Michigan, USA<\/p>\n

\n

8:30 \u2013 9:00 (Thursday) \u2013 Room 2<\/p>\n

\"\"Dr. Mohammed Alkahtani
\n<\/strong>Associate Professor, Industrial Engineering Department<\/span>
\nRaytheon Chair for Systems Engineering (RCSE), Advanced Manufacturing Institute<\/span>
\nKing Saud University<\/span>
\nRIYADH, Saudi Arabia<\/span><\/p>\n

Mohammed Alkahtani is an Associate Professor in Industrial Engineering Department, King Saud University, and Vice-Dean of Advanced Manufacturing Institute, King Saud University, Riyadh, Saudi Arabia. He earned his B.Sc. degree in Industrial Engineering from King Saud University (Riyadh, Saudi Arabia), a M.Sc. in Industrial Engineering from the University of Central Florida (Orlando, FL, USA), and a Ph.D. in Industrial Engineering from Loughborough University (Loughborough, UK). He has diverse expertise in Analysis and design of manufacturing systems, logistics, supply chain and operations management; application of simulation, mathematical modeling and optimization techniques to solve supply chain, logistics, and manufacturing systems problems; business process improvement and organizational design, responsiveness measurement, response modeling, lean and agility in manufacturing and supply chain.\u00a0<\/strong>\u00a0<\/strong><\/span><\/p>\n

ID 515 Supply Chain 4.0: A Shift in Paradigm
\n<\/strong>Mohammed Alkahtani, Industrial Engineering Department, College of Engineering, King Saud University, Riyadh-11421, Saudi Arabia
\nRaytheon Chair for Systems Engineering (RCSE), Advanced Manufacturing Institute, King Saud University, Riyadh-11421, Saudi Arabia
\nMustufa Haider Abidi, Raytheon Chair for Systems Engineering (RCSE), Advanced Manufacturing Institute, King Saud University, Riyadh, Saudi Arabia<\/p>\n

\n

9:00 \u2013 9:30 (Thursday) \u00a0– Room 2<\/p>\n

A<\/strong>\"\"<\/strong><\/span>had Ali, Ph.D.
\n<\/strong>Associate Professor<\/span>
\nDirector, Bachelor of Science in Industrial Engineering (BSIE)<\/span>
\nDirector, Master of Science in Industrial Engineering (MSIE)<\/span>
\nDirector, Smart Manufacturing and Lean Systems Research Group<\/span>
\nCoordinator, Siemens Electro-Matic Industrial Engineering Lab<\/span>
\nA. Leon Linton Dept. of Mechanical Engineering<\/span>
\nLawrence Technological University<\/span>
\nSouthfield, Michigan, MI 48075, USA<\/span><\/p>\n

Status of Industry 4.0<\/em><\/strong><\/span><\/p>\n

Ahad Ali is an Associate Professor and Director of Industrial Engineering Program and Director of Smart Manufacturing and Lean Systems, A. Leon Linton Department of Mechanical Engineering at the Lawrence Technological University, Southfield, Michigan, USA. He earned B.S. in Mechanical Engineering from Khulna University of Engineering and Technology, Bangladesh, Masters in Systems and Engineering Management from Nanyang Technological University, Singapore and Ph.D. in Industrial Engineering from University of Wisconsin-Milwaukee. Dr. Ali was Assistant Professor in Industrial Engineering at the University of Puerto Rico – Mayaguez, Visiting Assistant Professor in Mechanical, Industrial and Manufacturing Engineering at the University of Toledo, and Lecturer in Mechanical Engineering at the Bangladesh Institute of Technology, Khulna. He received an Outstand-ing Professor Award of the Industrial Engineering Department, University of Puerto Rico -Mayaguez, (2006-2007). He has published 50 journal and 121 conference papers. Dr Ali has done research projects with Chrysler, Ford, DTE Energy, New Center Stamping, Whelan Co., Delphi Automotive System, GE Medical Systems, Harley-Davidson Motor Company, International Truck and Engine Corporation (ITEC), National\/Panasonic Electronics, and Rockwell Automation. His research interests include manufacturing systems modeling, simulation and optimization, intelligent scheduling and planning, artificial intelligence, predictive maintenance, e-manufacturing, and lean manufacturing. He has successfully advised seven doctoral students. Dr. Ali has involved with many international conference committees. He has served as an Executive Director of IEOM Society International and Conference Co-Chair of the International Conference on Industrial Engineering and Operations Management and hold events in Dhaka, Kuala Lumpur, Istanbul, Bali, Dubai, Orlando, Detroit, Rabat, UK, Bogota, Paris, Washington, DC, Pretoria and Bangkok. Dr. Ali has visited 20 countries for professional events. He is a member of IEOM, IN-FORMS, SME and IEEE.<\/p>\n

\n

09:30 \u2013 10:00 Thursday Morning Keynote I<\/em>: Dr. Sascha Gierlings<\/strong>, Head of Prototype Manufacturing, Business Development Turbomachinery, Fraunhofer-Institute for Production Technology (IPT), Steinbachstra\u00dfe, Aachen, Germany<\/p>\n

10:00 – 10:30: Thursday Morning Keynote II<\/em>: Ing. Tom\u00e1\u0161 Vondr\u00e1k MBA, <\/strong>Plant Manager, Continental Automotive Czech Republic, Brand\u00fds nad Labem \u2013 Ballroom<\/p>\n

10:30 – 11:00: Thursday Morning Keynote III<\/em>: Lud\u011bk Jan\u00edk<\/strong>, Director \u2013 Eaton European Innovation Center, Eaton Corporation, Prague, Czech Republic<\/p>\n

\n

Session X: Industry Solutions
\nIndustry 4.0<\/span>
\n<\/strong>11:30 am \u2013 1:00 pm (Thursday) – Room 2
\n<\/strong><\/span>Session Chair:<\/span> Yulita Veranda Usman, Bogor Agricultural University, Indonesia<\/strong><\/p>\n

11:30 \u2013 12:00 (<\/strong>Thursday)<\/strong> \u2013 Room 2<\/p>\n

Gcina Mduduzi Nzima
\n<\/strong><\/span>Post-Graduate School of Engineering Management
\n<\/span>University of Johannesburg
\n<\/span>South Africa<\/span><\/p>\n

Gcina Nzima is a senior engineer in a glass manufacturing organization and holds a Baccalaureus Degree in electrical engineering from the University of Johannesburg. To date has spent seven years in the glass manufacturing and packaging industry, three in engineering sales and development and two years in the stainless steel industry in the Republic of South Africa. His work covers design and projects management of industry inspection and packaging automation machinery. The design section covers the integration of electronics and programming of industrial based systems.<\/p>\n

ID 387 The Effects of the Fourth Industrial Revolution on the Career Progression of Engineers in the South African Packaging Industry
\n<\/strong>Gcina Mduduzi Nzima, Hannelie Nel and Bheki Makhanya, Post-Graduate School of Engineering Management, University of Johannesburg, South Africa<\/p>\n

\n

12:00 \u2013 12:30 (Thursday) \u2013 Room 2\u00a0<\/strong><\/p>\n

Felicita Chromjakov\u00e1
\n<\/strong>Professor <\/span>
\nDepartment of Industrial Engineering and Information Systems <\/span>
\nTomas Bata University in Zlin<\/span>
\nCzech Republic\u00a0<\/span><\/p>\n

Felicita Chromjakov\u00e1 is a Professor by Department of Industrial Engineering and Information Systems at the Tomas Bata University in Zlin, Czech Republik. She holds a Science degree in Industrial Engineering by University \u017dilina, Slovakia. Professor grade she holds at Tomas Bata University in Zlin, programme Economic and Management \u2013 Industrial Engineering. She is oriented on research project concerned into area of leam management techniques, digitized process management technologies, innovations and improvement projects in traditional production technologies. A lot of industrial projects she completed in cooperation with more industrial companies as Hella, Autstin Detonator, Continental, Denso. Her publication horizon consists from more scientific oriented papers, presented by various international meetings with colleagues from European countries, USA, Australia and Asia.<\/p>\n

Denisa Hru\u0161eck\u00e1
\n<\/strong>Senior Lecturer and Researcher <\/span>
\nDepartment of Industrial Engineering and Information Systems<\/span>
\nTomas Bata University in Zl\u00edn<\/span>
\nCzech Republic<\/span><\/p>\n

\u00a0\"\"<\/strong><\/p>\n

Denisa Hru\u0161eck\u00e1 is a senior lecturer and researcher at Tomas Bata University in Zl\u00edn, Department of Industrial Engineering and Information Systems. In 2009, she received a Master degree in Industrial Engineering and later, in 2014, she defended doctoral thesis focused on advanced methods for production planning and scheduling. Currently, her research activities concentrate on modern logistic concepts, Logistics 4.0, theory of constraints and advanced methods for production planning and scheduling, optimization of material flows, digitization in logistic processes and Event-B modelling of production and logistic systems. She has taught courses focused on logistics, production process improvement and business information systems for both Czech and foreign students. She actively cooperates with many industrial companies where she participates in practical projects focused especially on improvement of production and logistic processes.<\/p>\n

ID 401 Production Employees Knowledge in Digitized Production Environment
\n<\/strong>Felicita Chromjakov\u00e1 and Denisa Hru\u0161eck\u00e1, Tomas Bata University in Zlin, Faculty of Management and Economics, Department of Industrial Engineering and Information Systems, Zl\u00edn, 76001, CZ<\/p>\n

\n

12:30 – 1:00 (Thursday) \u2013 Room 2\u00a0<\/strong><\/p>\n

Yulita Veranda Usman
\n<\/span><\/b><\/span>Agroindustrial Engineering Department, Bogor Agricultural University, Bogor
\n<\/span>Industrial Engineering Department, Pancasila University, Jakarta
\n<\/span>Indonesia<\/span><\/p>\n

Yulita V. Usman is a Lecturer in the Department of Industrial Engineering at Pancasila University. She graduated from The College of Industrial Management, Ministry of Industry, The Republic of Indonesia for a Bachelor degree. Her Master in Management of Small Medium Industry from Bogor Agricultural University and now Candidate Doctor in Agroindustrial Technology at Bogor Agricultural University. She is working on the project: Traceability in Distribution of Halal Fresh Broiler. She has published journal and conference papers. Her research interests include manufacturing, optimization, business process modeling, and system engineering.<\/p>\n

ID 428 Business Process Modeling for Tracing Halal Food using BPMN
\n<\/strong>Yulita Veranda Usman, Agroindustrial Engineering Department, Bogor Agricultural University, Bogor, Industrial Engineering Department, Pancasila University, Jakarta, Indonesia
\nAnas Miftah Fauzi and Tun Tedja Irawadi, Chemistry Department, Bogor Agricultural University, Bogor, Indonesia<\/p>\n

\n

13:00 \u2013 14:30 Thursday<\/em> Lunch Keynote<\/em>: Dr. Jose Luis Guerrero-Cusumano<\/strong>, Associate Professor of Operations and Information Management, McDonough School of Business, Georgetown University, Washington D.C., USA<\/p>\n

\n

Session XI:<\/strong> Industry Solutions – <\/strong>Workshop on Entrepreneurship and Innovation<\/strong><\/span>
\n2:30 \u2013 4:00 pm (Thursday) – Room 2<\/strong><\/span><\/p>\n

Professor Donald M. Reimer<\/span><\/strong>
\nDirector of Membership and Chapter Development \u2013 IEOM Society<\/span>
\nPresident, The Small Business Strategy Group, Detroit, Michigan, USA<\/span>
\nAdjunct Faculty \u2013 A. Leon Linton Department of Mechanical Engineering<\/span>
\nLawrence Technological University, Southfield, Michigan, USA<\/span><\/p>\n

\"\"<\/p>\n

Donald M. Reimer is an adjunct faculty at the A. Leon Linton Department of Mechanical Engineering in College of Engineering at Lawrence Tech in Southfield, Michigan. He coordinates the Certificate of Entrepreneurial Engineering Skills. Mr. Reimer holds a Bachelor of Science degree in Industrial Management from Lawrence Technological University and a Master of Arts degree in Political Science from University of Detroit\/Mercy. He is a Certified Management Consultant with over 35 years of experience in working with closely-held businesses. He has taught courses in entrepreneurship, strategic management, corporate entrepreneurship and innovation for engineers. Mr. Reimer is a member of the Lawrence Tech Kern Campus Committee, Coordinator of the Lawrence Tech Innovation Encounter. He is faculty Advisor of the Collegiate Entrepreneurs\u2019 Organization. Mr. Reimer serves as a Kern Fellow of The Kern Family Foundation, Co-Direct of the Coleman Fellows Program, member of the National Collegiate Entrepreneurs\u2019 Organization Faculty Advisory Council and is a member of the American Society of Engineering Education. He has operated his own consulting company \u2013 The Small Business Strategy Group for 23 years. He published numerous articles on small business, entrepreneurship and strategic thinking. He has received several awards and recognition by local, state and federal agencies for his work in entrepreneurship and minority business development. Mr. Reimer served as member of the Minority Economic Development Committee of New Detroit. Mr. Reimer is member of the Small Business Advisory Council of the Detroit Regional Chamber of Commerce. Mr. Reimer is a member of Advisory Board of the Milwaukee Junction Small Business Assistance Center. He is also a member of the Applied Innovation Alliance. Mr. Reimer serves as a KEEN Fellow for The Kern Family Foundation and is a member of United States Association of Small Business and Entrepreneurship.<\/p>\n

\n

Session XII: Industry Solutions – Industry Best Practices<\/span>
\n<\/strong>4:30 \u2013 6:00 pm (Thursday) – Room 2
\n<\/strong>Session Chair: <\/strong>\u00a0Dr. Anil Kumar, University of Derby,\u00a0UK<\/strong><\/span><\/p>\n

4:30 \u2013 5:00 (Thursday)\u00a0– Room 2<\/p>\n

Dr. Rajeev Agrawal<\/strong> <\/span>
\nAssociate Professor <\/span>
\nDepartment of Mechanical Engineering
\nIndustry-Institute Coordinator<\/span>
\nMalaviya National Institute of Technology <\/span>
\nJaipur, India<\/span><\/p>\n

\"\"<\/p>\n

How Lean Manufacturing is Helping Industries in India<\/strong> <\/em><\/span><\/p>\n

Dr. Rajeev Agrawal is an Associate Professor in department of Mechanical Engineering at the Malaviya National Institute of Technology Jaipur, India. B.E. (Mechanical Engineering) from Government Engineering College, Jabalpur, India. M.E. (Production Engineering) from MNNIT, Allahabad. PhD (Industrial Engineering) from Birla Institute of Technology, Mesra Ranchi. He has published Journal and conference papers. He is a member of Member of IE (India). Member of IAENG. Life Member of Indian Institution of Production Engineers (IIPE). Life Member of Indian Society of Technical Education,(ISTE). Research interest in Industrial Engineering, Lean manufacturing, Operations Management, Six Sigma, Sustainable Manufacturing.<\/p>\n

\n

5:00 \u2013 5:30 (Thursday) – Room 2<\/p>\n

Ade Tuti Lestari
\n<\/strong>Department of Sport Education, STKIP Situs Banten, Indonesia<\/span>
\nDepartment of Sport Education<\/span>
\nUniversitas Negeri Jakarta<\/span>
\nJakarta 13220, Indonesia<\/span><\/p>\n

Ade Tuti Lestari is a lecturer in educational sport department at STKIP Situs Banten, now on studying at doctoral program at Universitas Negeri Jakarta, Department of Sport Education, Jakarta 13220, Indonesia<\/p>\n

ID 564\u00a0\u00a0\u00a0\u00a0\u00a0 Model of Treatment Media and Hand-Eye Coordination, Experimental Studies on Altras Softball Team
\n<\/strong>Ade Tuti Lestari, Department of Sport Education, STKIP Situs Banten, Indonesia and Department of Sport Education, Universitas Negeri Jakarta, Jakarta 13220, Indonesia
\nJames Tangkudung and Rizki Nurulfa, Department of Sport Education, Universitas Negeri Jakarta, Jakarta 13220, Indonesia
\nPuji Haryanti, Magister of Sport Education, Universitas Negeri Jakarta, Jakarta 13220, Indonesia
\nOne Laila, Department of English, STKIP Situs Banten, Serang 42121, Indonesia
\nChristianti Anggraini Motto, Faculty of Sport Science, Universitas Negeri Manado, Sulawesi Utara, Manado 95618, Indonesia
\nDikdik Fauzi Dermawan, Faculty of Sport Science, Universitas Singa Perbangsa, Jawa Barat, Karawang 41361, Indonesia
\nBasyarudin Acha, Faculty of Sport Science, Universitas Samudera, Banda Aceh 24415, Indonesia
\nAbdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia<\/p>\n

\n

5:30 \u2013 6:00 (Thursday)\u00a0– Room 2<\/p>\n

Dr. Anil Kumar<\/strong> <\/span>
\nSenior Research Fellow in area of Decision Sciences <\/span>
\nCentre for Supply Chain Improvement<\/span>
\nUniversity of Derby<\/span>
\nUnited Kingdom (UK)<\/span><\/p>\n

\"\"<\/p>\n

Anil Kumar is a Senior Research Fellow in area of Decision Sciences at Centre for Supply Chain Improvement, University of Derby, United Kingdom (UK). For the last eight years, he has been associated with teaching and research. He earned his PhD in Management Science from Indian Institute of Information Technology and Management, Gwalior, India. He did his graduation in Mathematics (Hons) and MSc (Mathematics) from Kurukshetra University, India. He earned his Master of Business Administration (MBA) and qualified National Eligibility Test (NET), June 2011. He has contributed over 40+ research papers in international referred & national journals, and conferences at the international and national level. He has sound analytical capabilities to handle commercial consultancy projects and to deliver business improvement projects. He has skills and expertise of Advance Statistics Models, Multivariate Analysis, Multi-Criteria Decision Making, Fuzzy Theory, Fuzzy Optimization, Fuzzy Multi-Criteria Decision Making, Grey Theory and Analysis, Application of Soft-Computing, Econometrics Models etc. His areas of research are: sustainability science, green\/sustainable supply chain management, customer retention, green purchasing behaviour, sustainable procurement, sustainable development, circular economy, Industry 4.0, performance measurement, human capital in supply chain and operations; decision modelling for sustainable business, and integration of operation area with others areas.<\/p>\n

\n

\"\"<\/p>\n

\n

Past Programs of IEOM Industry Solutions<\/strong><\/h2>\n
    \n
  1. 2015 Dubai – IEOM Industry Solutions<\/a><\/li>\n
  2. 2015 Orlando – IEOM Industry Solutions<\/a><\/b><\/i><\/u><\/li>\n
  3. 2016 – Kuala Lumpur Industry Solutions<\/a><\/b><\/i><\/u><\/li>\n
  4. 2016 Detroit – IEOM Industry Solutions<\/a><\/b><\/i><\/u><\/li>\n
  5. 2017 Rabat – IEOM Industry Solutions<\/a><\/b><\/i><\/u><\/li>\n
  6. 2017 Bristol, UK<\/li>\n
  7. 2017 Bogota<\/li>\n
  8. 2018 Bandung – IEOM Industry Solutions<\/a><\/li>\n
  9. 2018 Paris<\/li>\n
  10. 2018 DC<\/li>\n
  11. 2018 Pretoria<\/li>\n
  12. 2019 Bangkok<\/li>\n
  13. 2019 Pilsen<\/li>\n
  14. 2019 Toront0<\/li>\n
  15. 2020 Dubai<\/li>\n
  16. 2020 Sao Paulo<\/li>\n<\/ol>\n
    \n

    If you have any question about IEOM Conference and\/or IEOM Society, please contact: info@ieomsociety.org<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":"

    IEOM Industry Solutions Pilsen, Czech Republic July 23-26, 2019 IEOM Industry Solutions sessions will showcase the industrial case studies and their impacts of the industrial solutions using IE \/ OM tools and techniques (lean, six sigma, FMEA, simulation, design of experiments, optimization, TOC, PLM, CAE, statistical analysis, safety, reliability, etc). IEOM 2019 Pilsen Conference will […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-33","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"http:\/\/ieomsociety.org\/pilsen2019\/wp-json\/wp\/v2\/pages\/33"}],"collection":[{"href":"http:\/\/ieomsociety.org\/pilsen2019\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/ieomsociety.org\/pilsen2019\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/ieomsociety.org\/pilsen2019\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/ieomsociety.org\/pilsen2019\/wp-json\/wp\/v2\/comments?post=33"}],"version-history":[{"count":51,"href":"http:\/\/ieomsociety.org\/pilsen2019\/wp-json\/wp\/v2\/pages\/33\/revisions"}],"predecessor-version":[{"id":661,"href":"http:\/\/ieomsociety.org\/pilsen2019\/wp-json\/wp\/v2\/pages\/33\/revisions\/661"}],"wp:attachment":[{"href":"http:\/\/ieomsociety.org\/pilsen2019\/wp-json\/wp\/v2\/media?parent=33"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}