Lucky Boy Tebogo Makhubedu, Faculty of Science, University of Johannesburg, 55 Beit St, Doornfontein, Johannesburg, South Africa
Charles Mbohwa, Faculty of Engineering and Built Environment, University of Johannesburg, 55 Beit St, Doornfontein, Johannesburg, South Africa
Nelson Madonsela, Faculty of Engineering and Built Environment, University of Johannesburg, 55 Beit St, Doornfontein, Johannesburg. South Africa
Antonio Carlos Pacagnella Junior, School of Applied Sciences, Associate Professor, State University of Campinas, Limeira, São Paulo, Brasil
Vinicius Romeiro da Silva, FHO University Center, Professor, Araras, São Paulo, Brasil
Plinio Thomaz Aquino Junior, FEI University Center, Professor, São Bernardo do Campo, São Paulo, Brasil
Thomas Olakitan Okimi, Associate lecturer, Department of Construction Science and Management, School of Architecture and Built Environment, University of Lincoln, United Kingdom
Saad Sarhan, Program Director/ Assistant Professor, Advance Engineering management, University of Birmingham Dubai, United Arab Emirates
Imoleayo Abraham Awodele, Construction Management and Quantity Surveying Dept., Durban University of Technology, Durban, South Africa
Temitope Olufolahan Olaniran, Lecturer, Department of Architecture, Durban University of Technology, Durban, 4001, South Africa
Olusoji Dapo Adetola, Department of Civil Engineering, Federal University Oye-Ekiti, Ekiti State, Nigeria
Oyindamola Aminat Olagunju, Salford Business school, University of Salford Manchester, United Kingdom
Bianca Andrea G. Eleria, Gabrille Francine DC. Gonzales, Virgilio S. Pangilinan Jr. and Wynona Zia J. Peregrino, Department of Industrial Engineering, University of Santo Tomas, Sampaloc, Manila 1008, Philippines
Carlos Ignacio P. Lugay Jr., PhD, PIE, ASEAN Engr., Professor of Industrial Engineering, University of Santo Tomas, Sampaloc, Manila 1008, Philippines
Valeria N. Droz Cruz and María M. García Sandoval, PhD, Polytechnic University of Puerto Rico, Industrial Engineering Department, United States
ID 26 Human Resources Analytics: Determining Possible Turnovers with Feature Engineering Approach
Eren Darici, Kira K. Hamelink and Ilgin Acar, Department of Industrial and Entrepreneurial Engineering and Engineering Management, Western Michigan University, Kalamazoo, MI, USA
VE Ogbonna, Chemical, Metallurgical & Materials Engineering, Tshwane University of Technology, P.M.B X680, Pretoria, South Africa Centre for Energy and Electric Power, Electrical Engineering, Tshwane University of Technology, P.M.B X680, Pretoria, South Africa
OM Popoola, Centre for Energy and Electric Power, Electrical Engineering, Tshwane University of Technology, P.M.B X680, Pretoria, South Africa
API Popoola, Chemical, Metallurgical & Materials Engineering, Tshwane University of Technology, P.M.B X680, Pretoria, South Africa
ID 46 Influence of Industry 4.0 on the Service Sector: A Scoping Review
Zhongyuan Li, Department of Multidisciplinary Engineering, College of Engineering, Texas A&M University, College Station, Texas, USA
Hamid Parsaei, Professor, Department of Industrial and Systems Engineering, College of Engineering, Texas A&M University, College Station, Texas, USA
ID 49 The Role of Generative AI in Supply Chain Resilience: A Fuzzy AHP Approach
Hamid Reza Maghroor, Faraz Madanchi and Thomas O’Neal, Department of Industrial Engineering and Management Systems (IEMS), University of Central Florida, Orlando, Florida, USA
ID 53 Profit Prediction Using Machine Learning and Regression Models: A Comparative Study
Farah Altarazi and Daryl Santos, Watson Institute for Systems Excellence (WISE), Systems Science and Industrial Engineering Department The State University of New York at Binghamton, New York, USA
ID 54 Robotic Process Automation (RPA) Implementation Challenges: A Literature Review
Farah Altarazi and Daryl Santos, Watson Institute for Systems Excellence (WISE), Systems Science and Industrial Engineering Department The State University of New York at Binghamton, New York, USA
Edward Wong, Foxconn, Houston, Texas, USA
Baris Yigin, Maritime Transportation Engineering PhD. Program, Istanbul Technical University, Istanbul, 34940, Turkey
Metin Celik, Department of Basic Science, Istanbul Technical University, Istanbul, 34940, Turkey, Industrial Data Analytics and Decision Support Systems Center, Azerbaijan State University of Economics, Baku, 1001, Azerbaijan
Tariq Masood and Jamil Abdo, Department of Engineering, Frostburg State University, 101 Braddock Road, Frostburg, Maryland, United States
ID 65 Operational Reliability- Production Best Practice Pragmatic Case Studies & Improvement
Jamil Abdo and Tariq Masood, Department of Engineering, Frostburg State University, 101 Braddock Road, Frostburg, Maryland, United States
John Olorunfemi Abe and Abimbola Patricia Idowu Popoola, Department of Chemical, Metallurgical and Materials Engineering, Tshwane University of Technology, P.M.B. X680, Pretoria, South Africa
Olawale Muhammed Popoola, Centre for Energy and Electric Power, Tshwane University of Technology, P.M.B. X680, Pretoria, South Africa
ID 68 Factors Affecting Consumer Acceptance of Digital Payments in E-Commerce Segment
Raha Azarmahd, Department of Industrial Engineering, Faculty of Management, Istanbul Technical University, Istanbul, Turkey
Gulsah Hancerliogullari Koksalmis, Department of Industrial Engineering, Faculty of Management, Istanbul Technical University, Istanbul, Turkey Department of Industrial Engineering and Management Systems, University of Central Florida, Orlando, FL, 32816, USA
ID 70 Hydrodynamic Bearings Lubricated with Ferrofluids
Nicholas Lambrache, Professor of Mechanical Engineering, PNG University of Technology, Morobe, PNG
Lidia Olaru, Jesta Group, Montreal, Quebec, Canada
ID 71 Lightweight Robotic Arm for Flexible Manufacturing
Nicholas Lambrache, Professor of Mechanical Engineering, PNG University of Technology, Morobe, PNG
David Guofu Chen, Department of Electrical Engineering, PNG University of Technology Morobe, PNG
Joseph Fisher, Department of Electrical Engineering, PNG University of Technology Morobe, PNGLidia
Olaru, Jesta Group, Montreal, Quebec, Canada
Brian N’Drelan, Department of Mechanical Engineering, PNG University of Technology Morobe, PNG
Amiral Rasyid and Novandra Rhezza Pratama, Industrial Engineering Department, Engineering Faculty, Universitas Indonesia, Depok, West Java, Indonesia
ID 73 Sensor Control of Portable Robotic Arms
Nicholas Lambrache, Professor of Mechanical Engineering, PNG University of Technology, Morobe, PNG
David Guofu Chen, Department of Electrical Engineering, PNG University of Technology Morobe, PNG
Joseph Fisher, Department of Electrical Engineering, PNG University of Technology Morobe, PNG
Lidia Olaru, Jesta Group, Montreal, Quebec, Canada
Brian N’Drelan, Department of Mechanical Engineering, PNG University of Technology Morobe, PNG
ID 74 Link Failure in Bucket Chains
Nicholas Lambrache, Professor of Mechanical Engineering, PNG University of Technology, Morobe, PNG
Brian N’Drelan, Department of Mechanical Engineering, PNG University of Technology Morobe, PNG
Lidia Olaru, Jesta Group, Montreal, Quebec, Canada
ID 75 Feasibility Restoration in Heuristic Scheduling Problems
Moddassir Khan Nayeem and Omar Abbaas, Department of Mechanical Engineering, University of Texas at San Antonio, San Antonio, TX, USA
ID 79 Lean Thinking in Healthcare 5.0 Technologies: An Exploratory Review
Goksu Avdan and Sinan Onal, School of Engineering, Department of Industrial Engineering, Southern Illinois University Edwardsville Edwardsville, IL, USA
ID 81 Advancements and Future Directions in the Application of Digital Twins in Machining Processes
Sepideh Abolghasem, Alexander Garcia, Matthew Youssef and Shiva Kumar c, Department of Manufacturing Systems Engineering and Management, California State University, Northridge, California, USA
Mohammed Said Obeidat, Department of Industrial Engineering, Jordan University of Science and Technology, Irbid 22110, Jordan
Diana Bashar Abbasi, Department of Industrial and Systems Engineering, Auburn University, Auburn, Alabama, USA
Catherine Maware, Fujio Cho Engineering Technology, Stanely and Karen College of Engineering, Assistant Professor of Lean Systems Engineering Technology, University of Kentucky, Lexington, KY, USA
David M Parsley, Fujio Cho Engineering Technology, Stanely and Karen College of Engineering, Assistant Professor of Lean Systems Engineering Technology, University of Kentucky, Lexington, KY, USA
Chenxi Tao, Roger J. Jiao and Seung-Kyum Choi, School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, USA
Milad Jasemi, Stephens College of Business, Assistant Professor of Data Analytics, University of Montevallo, Montevallo, AL, USA
Milad Shoaeinaeini, Department of Management and Accounting, Islamic Azad University, Islamshahr Branch, Tehran, Iran
Maryam Shoaeinaeini, Department of Computer Science, University of Kentucky, Lexington, KY, USA
ID 89 Top surface Quality Analysis of Aluminum Structured: Lean Six Sigma Methodology
Hamdy E. Khalaf, Department of Data Analysis, Southern Arkansas University, Magnolia, Arkansas, 71753, USA
Hayder Zghair, Department of Engineering and Physics, Southern Arkansas University, Magnolia, Arkansas, 71753,
USA Donna Miller, Southern Aluminum, Southern Arkansas University, Magnolia, Arkansas, 71753, USA
Enrique Contreras, Southern Aluminum, Southern Arkansas University, Magnolia, Arkansas, 71753, USA
Tasfia Tarannum, Department of Data Analysis, Southern Arkansas University, Magnolia, Arkansas, 71753, USA
Hayder Zghair, Department of Engineering and Physics, Southern Arkansas University, Magnolia, Arkansas, 71753, USA
ID 94 Fundamentals of Smart In-process Inspection in Advanced Manufacturing Systems
Shu Wang, School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, USA Lvhai (Samuel) Hu, Director of TE Connectivity, Shanghai, China
Roger J. Jiao, Associate Professor of School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA
Roger J. Jiao, Associate Professor of School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA
Lucky Boy Makhubedu, Faculty of Science, University of Johannesburg, Johannesburg, South Africa
Charles Mbohwa, Pro-Vice Chancellor Strategic Partnerships and Industrialisation, University of Zimbabwe, Harare, Zimbabwe
Nelson Sizwe Madonsela, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa
ID 96 AUTOBVM: Automated Bag-Valve-Mask A Senior Design Manufacturing Case
Kevin Hernandez, Alexander Garcia, Tatsuro Kajioka, Daniel Cuara, Jeffrey Liu, and Sepideh Abolghasem, Department of Manufacturing Systems Engineering and Management, California State University Northridge, Northridge 91330, California, USA
ID 97 Designing an Arm Angle Trainer to Facilitate Ballet for All Kids
Elliot Sadler, George Thomas Mohan, Kethan Suresh, Tejas Kotian, Sai Praneeth, and Sepideh Abolghasem, Department of Manufacturing Systems Engineering and Management, California State University Northridge, Northridge 91330, California, USA
ID 98 Cargo Craft Senior Design Manufacturing Case
Juan Barajas, Dimagi Gajanayake, Jose A Galvan, and Hasib Mangal, Department of Manufacturing Systems Engineering and Management, California State University, Northridge Northridge 91330, California, USA
ID 99 Torque Tactician: A Senior Design Manufacturing Case
Kevin Ayala, Marquis Amador, Steven Casillas, Alexis Orozco, Ronald Martinez and Sepideh Abolghasem, Department of Manufacturing Systems Engineering and Management, California State University Northridge, Northridge 91330, California, USA
Shu Wang, School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, USA
Feng Zhou, Assistant Professor of College of Engineering and Computer Science, Dearborn, MI 48128, USA
Roger J. Jiao, Associate Professor of School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA
Oscar Eduardo Rivas-Aguilar, Instituto Tecnológico Superior de Álamo Temapache, Tecnólogico Nacional de México, Veracruz, Mexico
Lila Margarita Bada-Carbajal, Senior Lecturer of Management, Instituto Tecnológico Superior de Álamo Temapache, Tecnólogico Nacional de México, Veracruz, Mexico
Gabriela Guadalupe Escobedo- Guerrero, Escuela Superior de Comercio y Administración, Unidad Santo Tomás, Instituto Politécnico Nacional, Mexico City, Mexico,
Héctor Alejandro Jiménez-Avalos, Instituto Tecnológico Superior de Álamo Temapache, Tecnólogico Nacional de México, Veracruz, Mexico
Arely Hernández Palacios, Instituto Tecnológico Superior de Álamo Temapache, Tecnólogico Nacional de México, Veracruz, Mexico
ID 104 Enhancing Organizational Evaluation with the Optimum Service Excellence Model
Devdas Shetty, Dean, School of Engineering and Applied Sciences, Professor of Mechanical Engineering, University of the District of Columbia Washington, DC, USA
Michael Osei, MBA (TQM), Michelle Rincones-Rodríguez B.S., Michael Harnar, Ph.D. and Liliana Rodríguez-Campos, Ph.D.
ID 106 Computational Model for Re-Routing and Assigning ESBs
Rajesh Saha and Mojahid Saeed Osman, The Center for Computational Modeling, Simulation and Analytics, Department of Industrial and Manufacturing Engineering, North Dakota State University, ND, USA
Moshood Alao and Olawale Popoola, Department of Electrical Engineering & Centre for Energy and Electric Power, Tshwane University of Technology, Pretoria, South Africa
ID 127 Impact of Patient Assignment Policy on Hospitalist Workloads
Ahmed Hamzi, Assistant Professor, Department of Industrial Engineering, Jazan University, Saudi Arabia
Bryan Norman, Professor and Department Chair, Department of Industrial, Manufacturing & Systems Engineering, Texas Tech University, USA
ID 130 Quality 5.0 Architecting: A Techno-Human-Centric Integrated Framework
Johnson Olaitan, Department of Industrial Engineering and Management Systems, University of Central Florida, USA
Ahmad Elshennawy, Department of Industrial Engineering and Management, University of Central Florida, USA
ID 131 Power Consumption Optimization for Sustainable Subtractive Manufacturing OperationZachary Rennard, Department of Engineering and Physics, Southern Arkansas University, Arkansas, USA
Hayder Zghair, Department of Engineering and Physics, Southern Arkansas University, Arkansas, USA
Jeffrey Sumner, Department of Engineering and Physics, Southern Arkansas University, Arkansas, USA
ID 135 Increase Reliability: Improve OTC Boilers Cycle
Shaiel Enid Suárez de Jesús BSIE, LSSGB, Jannette Perez Barbosa, MSIE, PE and Andrés Lorán Burtón, D.Eng, Department of Industrial and Management Engineering Universidad Ana G. Méndez-Gurabo Campus, Gurabo, Puerto Rico
ID 137 Machining Variables Optimization for Sustainability Manufacturing
Noah Bretz, Department of Engineering and Physics, Southern Arkansas University, Arkansas, USA
Hayder Zghair, Department of Engineering and Physics, Southern Arkansas University, Arkansas, USA
Jeffrey Sumner, Department of Engineering and Physics, Southern Arkansas University, Arkansas, USA
ID 138 Optimal Inventory Management Policies When Supply Is Bundled
Mohammad E. Arbabian, Assistant Professor, Pamplin School of Business, Professor of Operations and Technology Management, University of Portland, Portland, OR, USA
Raziye Aghapour, School of Industrial, Manufacturing, and Systems Engineering, University of Texas at Arlington, Texas, Arlington, USA
Erick C. Jones Jr., Assistant Professor, School of Industrial, Manufacturing, and Systems Engineering, University of Texas at Arlington, Texas, Arlington, USA
Sarasadat Alavi, School of Industrial, Manufacturing, and Systems Engineering, University of Texas at Arlington, Texas, Arlington, USA
Rahul Joshi, Saurabh Sanjay Singh and Deepak Gupta, Department of Industrial, Systems, and Manufacturing Engineering, College of Engineering Wichita State University, Wichita, KS, USA
Patricio Alejandro Zamora Navarro, Rafael Alejandro Ruiz Miller, Roberto Serna Zuazua, José D. Morcillo, Ph.D., Escuela de Ingeniería y Tecnologías, Universidad de Monterrey, México
ID 143 A Comprehensive Analysis of Factors Influencing Biogas Plant Location
Shuaib Kaka, PhD candidate, Mehran University of Engineering and Technology, Jamshoro, Sindh, Pakistan, Lecturer, Industrial Engineering and Management, Dawood University of Engineering and Technology, Karachi, Sindh, Pakistan
Dr. Muhammad Saad Memon and Dr. Sonia Irshad Mari, Associate Professor, Industrial Engineering and Management, Mehran University of Engineering and Technology, Jamshoro, Sindh, Pakistan
ID 157 A Sustainable Product Design Approach to Improving Self-administered Medication
Reenu Singh PhD, Independent Researcher, Fairfax, Virginia, United States
Amir Atariani, Department of Mechanical Engineering, École de Technologie Supérieure, Montreal, Quebec, Canada
Yvan Beauregard, Professor of Department of Mechanical Engineering, École de Technologie Supérieure, Montreal, Quebec, Canada
Sachin Sivankutty, Master’s Student in Industrial and Systems Engineering, Industrial and Systems Engineering (ISE) Department, Charles W. Davidson College of Engineering, San José State University, One Washington Square, San José, CA, USA
Behin Elahi, Associate Professor, Industrial and Systems Engineering (ISE) Department, Charles W. Davidson College of Engineering, San José State University, One Washington Square, San José, CA, USA
Rama Prananditha Sularto Abdi, Master Program of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
Eko Liquiddanu and Eko Pujiyanto, Department of Industrial Engineering, Universitas Sebelas Maret, Surakarta, 57126, Indonesia
ID 168 A Study of Wind Patterns As a Function of Ventilator Geometry
Abu Huraira Atta Ullah, Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, Pakistan
Zoheir Hamid, Department of Computer Science and Engineering, Mississippi State University, Starkville, Mississippi 39762, USA
Muhammad Ashhub Ali, Software Engineering Department, National University of Science and Technology, Islamabad, Pakistan
Dr. Anjum Ali, Former Professor of EE, FAST-NU, Lahore, Pakistan, Former Professor, ECE, KICS, UET, Lahore, Pakistan, Former Associate Professor of EE, Mercer University, MACON, GA, USA, Former Associate Professor of CSE, LUMS, Lahore, Pakistan
Gonzalo Dennys Ramos Olortegui and Renzo Martin Barinotto Valencia, University of Lima, Lima, Peru
Ariel Gallegos-Oliden, Cristina Rodríguez-Herrera and Carlos Urbina-Rivera, Faculty of Engineering, Universidad de Lima, Perú
Emad A. Awada, Associate Professor, Department of Electrical Engineering
Al-Balqa Applied University, Amman, Jordan
Hernando Garzón Saenz, CIPTEC Research Group – Faculty of Engineering – Industrial Engineering Program – Technology in Industrial Production Fundacion Universitaria Tecnologico Comfenalco, Cartagena de Indias, Colombia
Andrés Redchuk, ETSII. Department of Computer Sciences. University Rey Juan Carlos. Madrid. Spain
Director of Operational Excellence and Process Improvement Institute. School of Engineer, University of Lomas de Zamora. Argentina
José Manuel Solana Garzón, CIPTEC Research Group- Faculty of Engineering – Industrial Engineering Program – Technology in Industrial Production, Fundacion Universitaria Tecnologico Comfenalco, Cartagena de Indias – Colombia
Ximena Naomi Paredes-Chirinos, Bachelor in Industrial Engineering, Faculty of Engineering, University of Lima, Peru
Nicolás Mateo Caballero-Carpio, Bachelor in Industrial Engineering, Faculty of Engineering, University of Lima, Peru
Juan Carlos Quiroz-Flores, Research Professor, Faculty of Engineering, University of Lima, Peru
ID 185 ABC-FSN Analysis for Inventory Management Policy: A Case Study in Retail Industry
Indesta Aulia Hendra Putri and Djoko Sihono Gabriel, Industrial Engineering Department, Indonesia University, Depok, Indonesia
Samantha May P. Aniceto, Charmi May C. Arozo, Mary Grace Bello, Aliyah Jann M. Portuguez and Maricar M. Navarro, Industrial Engineering Program, College of Engineering and Architecture, Technological Institute of the Philippine, Quezon City, Philippines
Mari Dane M. Agra, Christine Anne L. De Guzman, Ali P. Deocareza, Robin Kenshin R. Sanchez, Aliyah Jann Portuguez and Maricar M. Navarro, Industrial Engineering Department, Technological Institute of the Philippines, Cubao Quezon City, Philippines
ID 188 Productivity Enhancement using ProModel Simulation:
A Case Study in the Book Manufacturing Company
Fredinbert L. Aguilar, Andrea Joyce A. Baldiviso, Jean Blecilde V. Caguete, John Dexter L. Laylo, Yoshitaka B. Sakai, Aliyah Jann M. Portuguez and Maricar M. Navaro Industrial Engineering Department, Technological Institute of the Philippines, Cubao, Quezon City, Philippines
Mae Ann Bodiongan, Justin Candaza, Angelica Dalumpines, John Lester Peñaflorida, Aliyah Jann Portuguez, Mesica Sarabia and Maricar M. Navarro, Industrial Engineering Program College of Engineering and Architecture Technological Institute of the Philippines, Quezon City, Philippines
Zendry Louie Mabilangan, Alliyah Jann Portuguez, Daniel Johns Tagibao, Gabriel Jerome Sabangan, Jonnamae Valdeviezo, Lyka Villegas and Maricar M. Navarro Industrial Engineering Program, College of Engineering and Architecture, Technological Institute of the Philippine, Quezon City, Philippines
Ümmügülüsüm Erdağı and M. Ebru Angün, Department of Industrial Engineering, Galatasaray University, İstanbul, Turkey
Kemal Sarıca, Department of Industrial Engineering, Gebze Technical University, Kocaeli, Turkey
ID 193 Most Frequent Chiller’s Faults: An Empirical Predictive Maintenance Study
Malek Almobarek, Department of Design, Manufacturing, and Engineering Management, Faculty of Engineering, University of Strathclyde, Glasgow, United Kingdom
ID 194 Application of Lean Manufacturing in the Energy Sectors
Prabhakar Uprety, Department of Automotive and Manufacturing Engineering Technology, Minnesota State University, Mankato, MN 56001, USA
Pawan Bhandari, Ph.D., Department of Automotive and Manufacturing Engineering Technology, Minnesota State University, Mankato, MN, USA
ID 195 Navigating Risks: The Imperative of Research in CIT and Hazmat Transport Security
Alireza Fallahtafti, Department of Operations, Weatherhead School of Management, Case Western Reserve University, Cleveland, OH 44106, USA
Tan Khoa, Department of Business Management, Weatherhead School of Management, Case Western Reserve University, Cleveland, OH, USA
Bianca Joyce Vargas-Romero, Bachelors in industrial engineering, Faculty of Engineering, University of Lima, Peru
Borys Gastón Urbizagastegui-Jaramillo, Bachelors in industrial engineering, Faculty of Engineering, University of Lima, Peru
Martín Fidel Collao-Díaz, Research Professor, Faculty of Engineering, University of Lima, Peru
Didi Chekwube Nnamdia, Kharlamova Marianna Db, Okeke Solomon Ekenec and Ayub Hassan Ulusowe, Friendship University of Russia Named after Patrice Lumumba (RUDN) University, Moscow, Russia
Oluwaseyi Samson Oladipupod, Pan African University, Life and Earth Sciences Institute (Including Health and Agriculture)- PAULESId
Ayub Hassan Ulusow, Master’s graduate, Ecology and Natural Resources Management, Peoples’ Friendship University of Russia Named after Patrice Lumumba (RUDN) University, Moscow, Russia
Nwobi Nelson Onyebuchi, Master’s graduate, Ecology and Natural Resources Management, Peoples’ Friendship University of Russia Named after Patrice Lumumba (RUDN) University, Moscow, Russia
ID 219 ANALYSIS OF OPERATIONAL DELAYS IN DUMPER CYCLE TIME IN OPEN PIT MINES
Shafi Muhammad Pathan and Abdul Ghani Pathan, Department of Mining Engineering, Mehran University of Engineering and Technology, Jamshoro, 76062, Sindh, Pakistan
Muhammad Saad Memon, Department of Industrial Engineering and Management, Mehran University of Engineering and Technology, Jamshoro, 76062, Sindh, Pakistan
ID 220 Visualization of Real-time Solutions of Routing Problems on Dynamic Networks
Mojahid Saeed Osman, Rajesh Saha, The Center for Computational Modeling, Simulation, and Analytics, Department of Industrial and Manufacturing Engineering, North Dakota State University, ND, USA
ID 221 A Systematic Review of the Internet of Things Contribution to Obtain Supply Chain Integration
Faraz Madanchi, Hamid Reza Maghroor and Thomas O’Neal, Department of Industrial Engineering and Management Systems (IEMS), University of Central Florida, Orlando, Florida, USA
Gülçin Büyüközkan, Industrial Engineering Department, Galatasaray University, 34349, Ortakoy, Istanbul, Turkiye
Fethullah Göçer, Industrial Engineering Department, Kahramanmaras Sutcu Imam University, 46040, Kahramanmaras, Turkiye
Gülçin Büyüközkan and Orhan Feyzioğlu, Professor Doctor, Professor Doctor, Industrial Engineering Department, Galatasaray University 34349, Istanbul, Turkey,
Celal Alpay Havle, Doctor of Industrial Engineering, Received from Graduate School of Science and Engineering, Galatasaray University 34349, Istanbul, Turkey
Pedro Leandro Lopes, Centro Paula Souza, Brazil Eliane Antônio Simões, Centro Paula Souza, Brazil
Solomon Okeke, Chekwube Didi, and Nelson Nwobi,Institute of Environmental Engineering, People’s Friendship University of Russia, Moscow, 117198, Russia
Franklin Osuagwu, Department of Geophysics, Nnamdi Azikiwe University, Awka, Nigeria
ID 231 Prospect and Opportunities for ISO Standards in Bangladesh
Faria Haque Pushpo and Md. Kutub Uddin, Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET) Khulna, Bangladesh
Solomon Okeke, Marianna Kharlamova, Chekwube Didi, and Nelson Nwobi, Institute of Environmental Engineering, People’s Friendship University of Russia, Moscow, 117198, Russia
Oluwaseyi Oladipupo, Pan African University, Life and Science Institute (PAULESI), Nigeria
Franklin Osuagwu, Department of Geophysics, Nnamdi Azikiwe University, Awka, Nigeria
ID 238 Leveraging AI for Enhanced Equipment Data Collection and Assimilation in Asset Monitoring
Raghunandan Gurumurthy, Crossover Solutions USA Inc., United States
Mercedes Fernández-Durán, Vanessa Quispe-Contreras and Carlos Urbina-Rivera, Faculty of Industrial Engineering, Lima University Av. Javier Prado Este 4600, Santiago de Surco, Lima – Peru
Celal Alpay Havle, Doctor of Industrial Engineering, Graduate School of Science and Engineering, Galatasaray University, Istanbul, Turkey Graduate Student in MBA program at University Canada West, Vancouver, BC V6B 1V9, Canada
Gülçin Büyüközkan, Professor Doctor, Professor Doctor, Industrial Engineering Department, Galatasaray University, 34349, Istanbul, Turkey
ID 241 A Systematic Literature Review of Performance Management of University Holding Company
Pennapat Jirachai and Natcha Thawesaengskulthai, Department of Industrial Engineering, Faculty of Engineering, Chulalongkorn University Bangkok, Thailand
ID 256 MBSE Benefits & Systematic Approach for Managing Complex System Models
Prosenjit Dutta Banik, Oakland University, United States
Nicholas Percarpio and Ahmed Aziz Ezzat, Rutgers, The State University of New Jersey, Piscataway, NJ, 08854, USA
Fiorella Pinedo-Albán, Gabriela Santillana-Santillana and Alberto Flores-Perez, Facultad de Ingeniería, Universidad de Lima, Lima, Perú
Edo Osehon Emmanuel, Specialist graduate, Applied Geology (Geology of oil and gas), Peoples’ Friendship University of Russia Named after Patrice Lumumba (RUDN) University, Moscow, Russia
Didi Chekwube Nnamdi, Master’s graduate, Ecology and Natural Resources Management, Peoples’ Friendship University of Russia Named after Patrice Lumumba (RUDN) University, Moscow, Russia
Okeke Solomon Ekene, Master’s graduate, Ecology and Natural Resources Management, Peoples’ Friendship University of Russia Named after Patrice Lumumba (RUDN) University, Moscow, Russia
ID 261 Can the “Art” of Mathematical Modeling in Industrial Engineering be Automated by AI?
Shrushti Mardikar, Abdullah Aldhuhayyan, Vittaldas V. Prabhu, Department of Industrial and Manufacturing Engineering, Pennsylvania State University, University Park, PA, USA
ID 262 Implementation of ISO 14298:2013 in a Valuable Document Printing Company in Lima, Peru
Lila Margarita Bada-Carbajal, Senior Lecturer of Management, Instituto Tecnológico Superior de Álamo Temapache, Tecnólogico Nacional de México, Veracruz, Mexico
Martha Aracely Gutiérrez Peralta, Escuela Superior de Comercio y Administración, Unidad Santo Tomás, Instituto Politécnico Nacional, Mexico City, Mexico
Luis Rocha-Lona, Senior Lecturer of Operations Management, Escuela Superior de Comercio y Administración, Unidad Santo Tomás, Instituto Politécnico Nacional, Mexico City, Mexico
Jose Arturo Garza-Reyes, Centre for Supply Chain Improvement, University of Derby, Derby, U. K
José Antonio Chavez-Espejel, Escuela Superior de Comercio y Administración, Unidad Santo Tomás, Instituto Politécnico Nacional, Mexico City, Mexico
ID 263 Small Data and Sparse Bayesian Learning for Sequential Inference of Network Connectivity
Jinming Wan, Jun Kataoka, Hiroki Sayama and Changqing Cheng, Department of Systems Science and Industrial Engineering, Binghamton University, Binghamton, NY 13902, USA
Jayanth Sivakumar, Citibank, N.A. company, New York, NY 10013, USA
Eric Peña, Motional company, Boston, MA 02210, USA
Yiming Che, School of Computing and Augmented Intelligence, Arizona State University, Tempe, AZ 85281, USA
Solomon Okeke, Yuri Khitev, Chekwube Didi, and Nelson Nwobi, Institute of Environmental Engineering, People’s Friendship University of Russia, Moscow, 117198, Russia
Oluwaseyi Oladipupo, Pan African University, Life and Science Institute (PAULESI), Nigeria
Franklin Osuagwu, Department of Geophysics, Nnamdi Azikiwe University, Awka, Nigeria
Leila Talebi and Lin Guo, Department of Industrial Engineering, South Dakota School of Mines and Technology, Rapid City, SD, USA
Jorge Alberto Peña Garay, Bachelors in industrial engineering, Faculty of Engineering, University of Lima, Peru
Martín Fidel Collao-Díaz, Research Professor, Faculty of Engineering, University of Lima, Peru
Jose Luis Adrianzén-Nuñez, Bachelors in industrial engineering, Faculty of Engineering, University of Lima, Peru
Gabriel Berrospi-Gálvez, Bachelors in industrial engineering, Faculty of Engineering, University of Lima, Peru
Martín Fidel Collao-Díaz, Research Professor, Faculty of Engineering, University of Lima, Peru
Helen Alejandra Alvarado-Davila, Bachelors in industrial engineering, Faculty of Engineering, University of Lima, Peru
Martín Fidel Collao-Díaz, Research Professor, Faculty of Engineering, University of Lima, Peru
ID 285 Industry 5.0 Perspectives on the Trustworthiness of Novel Multimodal Language Models
Alfonso E. de la Fuente Ruiz, European Science Foundation, C. Valenciana, Spain
Galia Novakova Nedeltcheva, Postdoc researcher, Politecnico di Milano, Milan, Italy
Andrea Ono-Yamanija and Valeria Daniela Reategui-Gonzales, Facultad de Ingeniería. Universidad de Lima, Perú Martin Fidel Collao-Diaz, Research Professor, Facultad de Ingeniería. Universidad de Lima, Perú
José Luis Sánchez-Flores, Bachelors in industrial engineering, Faculty of Engineering, University of Lima, Peru
James Junior Sanchez-Leveau, Bachelors in industrial engineering, Faculty of Engineering, University of Lima, Peru
Martín Fidel Collao-Díaz, Research Professor, Faculty of Engineering, University of Lima, Peru
ID 302 Projects in Mechatronics Engineering Education for Industry 4.0
Claudio Campana, Professor Mechanical Engineering, College of Engineering, Technology and Architecture, University of Hartford, W. Hartford, CT, USA
Saeid Moslehpour, Professor Electrical Computer Engineering, College of Engineering, Technology and Architecture, University of Hartford, W. Hartford, CT, USA