{"id":526,"date":"2017-11-27T07:01:54","date_gmt":"2017-11-27T07:01:54","guid":{"rendered":"http:\/\/ieomsociety.org\/ieom2018\/?page_id=526"},"modified":"2024-09-20T15:57:35","modified_gmt":"2024-09-20T15:57:35","slug":"proceedings","status":"publish","type":"page","link":"https:\/\/ieomsociety.org\/bangladesh2023\/proceedings\/","title":{"rendered":"Proceedings"},"content":{"rendered":"

Proceedings – 6th Bangladesh Conference 2023
<\/strong><\/span><\/h2>\n

ISSN: <\/strong>2169-8767 (U.S. Library of Congress)                        ISBN: 979-8-3507-1733-4
<\/strong><\/p>\n

\n

Cover Page<\/strong><\/a><\/p>\n

Title<\/strong><\/a><\/p>\n

Masthead<\/strong><\/a><\/p>\n

Welcome<\/strong><\/a><\/p>\n

Committee<\/strong><\/a><\/p>\n

Table of Contents<\/strong><\/a><\/p>\n

ID 6       Assessing the Implementation Challenges of Industrial IoT for the Electronics Manufacturing Industry<\/a><\/strong> of Bangladesh<\/a><\/strong><\/p>\n

Subrata Talapatra and Ali Al Mamun, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology Khulna-9203, Bangladesh<\/p>\n

ID 12     Electro-Hydraulic Power Steering System for an Automobile<\/a><\/strong><\/p>\n

Robin Barua, Md. Mizanur Rahman, Md. Tazul Islam, Syed Masrur Ahmmad, Saswata Dutta and Rasel Sen, Institute of Energy Technology, Department of Mechanical Engineering, Department of Electrical and Electronic Engineering, Chittagong University of Engineering and Technology (CUET), Chattogram, Bangladesh, Premier University, Chattogram, Bangladesh<\/p>\n

ID 15     Supply Chain Management, an Advancement of RMG Growth in Bangladesh<\/a><\/strong><\/p>\n

S.H. Sakib and MD. Shahidul Islam, Department of IPE, Shahjalal University of Science and Technology, Sylhet, Bangladesh<\/p>\n

ID 17     Key Parameter Identification of Linear Congruential Method in Random Number Generation<\/a><\/strong><\/p>\n

Polash Kumar Guptho and Abul Mukid Md. Mukaddes, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet 3114, Bangladesh<\/p>\n

ID 18     Potential and Challenges of Bangladesh Shipbuilding in Contest of Global<\/strong><\/a><\/p>\n

Commodore Khandakar Akhter Hossain, (E), NUP, ndc, psc, PhD, BN, Commodore Superintendent Dockyard and Chairman, BN Dockyard Technical Institute, Chattogram, Bangladesh<\/p>\n

ID 19     Evaluation of Prospects and Challenges of Local Ship Recycling Industry in Contest of Global<\/strong><\/a><\/p>\n

Commodore Khandakar Akhter Hossain, (E), NUP, ndc, psc, PhD, BN, Commodore Superintendent Dockyard and Chairman, BN Dockyard Technical Institute, Chattogram, Bangladesh<\/p>\n

ID 20     Potential and Challenges of Artificial Intelligence (AI) and Future Consequences<\/strong><\/a><\/p>\n

Commodore Khandakar Akhter Hossain, (E), NUP, ndc, psc, PhD, BN, Commodore Superintendent Dockyard and Chairman, BN Dockyard Technical Institute, Chattogram, Bangladesh<\/p>\n

ID 21     Evaluation of the Internet of Things (IoT) as Global Technology and Future Consequence<\/strong><\/a><\/p>\n

Commodore Khandakar Akhter Hossain, (E), NUP, ndc, psc, PhD, BN, Commodore Superintendent Dockyard and Chairman, BN Dockyard Technical Institute, Chattogram, Bangladesh<\/p>\n

ID 22     Optimizing Weight Fractions and Chemical Treatments to Increase the Shore Hardness of Woven E-Glass, Woven Jute, and Kenaf Hybrid Composite Laminates<\/strong><\/a><\/p>\n

Amartya Biswas, Mahbubur Rahman, Ibrahim Uddin Bhuiyan, Md. Mashuk, Mushfiqul Moula, Department of Mechanical and Production Engineering Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh<\/p>\n

ID 24     Derivation of a 3-degree Breakdown of Overall Operational Efficiency (OOE) to Identify the Main Factor of Non-Efficiency in the RMG\/Footwear Industry<\/strong><\/a><\/p>\n

Md Muhibur Rahman, Department of Industrial & Production Engineering, Shahjalal University of Science & Technology, Sylhet<\/p>\n

ID 25     Real-time Battery Swapping Station Recommendation using Ensemble Clustering<\/strong><\/a><\/u><\/strong><\/p>\n

Donghwan Shin and Taesu Cheong, School of Industrial and Management Engineering, Korea University, Seoul, South Korea<\/p>\n

ID 27     An Ergonomic Analysis of Working Posture of Selected Brick Kiln Workers using Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA) Method<\/strong><\/a><\/u><\/strong><\/p>\n

Mohammad Iqbal, Md. Golam Mahmood and Md. Rashedul Islam, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh<\/p>\n

ID 29     Total Productive Maintenance: Enhancing Overall Equipment Efficiency in the Steel Industry of Bangladesh<\/strong><\/a><\/u><\/strong><\/p>\n

Joyanta Das, Department of Industrial and Production Engineering, Khulna University of Engineering & Technology, Khulna, Bangladesh<\/p>\n

Prasis Saha, Department of Electrical and Electronics Engineering, BRAC University, Dhaka, Bangladesh<\/p>\n

Sanatan Sushil, Department of Industrial and Production Engineering, Shahjalal University of Science & Technology, Sylhet, Bangladesh<\/p>\n

ID 30     Reduction of Changeover Time by Using the SMED Technique with the Assistance of Lean Manufacturing Tools in a Plastic Company<\/strong><\/a><\/u><\/strong><\/p>\n

Rotan Kumar Saha, Md. Minhaj Uddin, Md. Mustafizur Rahman, Md. Tutul Islam and Md. Mukshitul Mumin, Department of Industrial and Production Engineering, Dhaka University of Engineering and Technology, Gazipur 1700, Bangladesh<\/p>\n

ID 32     Optimization in Supply Chain Components to Design a Strategic Model and Research Opportunities to<\/a><\/strong> Enable Profitability<\/a><\/strong><\/p>\n

K. M. Sharif Ahmed, Masters in Applied Statistics and Data Science, Jahangirnagar University and BSc. In Industrial and Production Engineering, Ahsanullah University of Science and Technology<\/p>\n

 Joyanta Barman Shuvro, MBA, Institute of Business Administration, University of Dhaka and BSc. In Mechanical Engineering,<\/p>\n

Chittagong University of Engineering and Technology<\/p>\n

ID 33     Development of Musculoskeletal Disease Risk Factor Assessment (MDRFA) Model for the Factory<\/a><\/strong> Workers in Bangladesh<\/a><\/strong><\/p>\n

Fardeen Islam, Mohammad Abu Shahriar Hossain and Kazi Humayra Shams, Department of Industrial Engineering and Management, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh<\/p>\n

ID 34     Auxiliary Variables and Two-Step Iterative Algorithms in Object Detection: A Novel Approach<\/strong><\/a><\/p>\n

Md. Habibur Rahman, Yeasin Reza, Kawsar Alam Tanvir, Salma Akter and Afsana Akter, Department of Mathematics, University of Chittagong, Chittagong, Bangladesh<\/p>\n

ID 36     Ranking the Critical Failure Factors to Lean Six Sigma Implementation in Dairy Processing Industry:<\/a><\/strong> A Bayesian BWM Approach<\/a><\/strong><\/p>\n

Ferdous Sarwar, Ph.D., Professor, Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh.<\/p>\n

Abhro Shome Pias and Omer Tahsin, Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh<\/p>\n

ID 37     Investigating Musculoskeletal Disorders and Risk Factors in Selected Bakeries: A Case Study in Sylhet Bangladesh<\/strong><\/a><\/p>\n

Dr. Engr. Mohammad Iqbal, Md Al Hadi and Mohammad Abir Hossain Rimon, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh<\/p>\n

ID 38     Fair Assignment of Matchdays in the Turkish Super League under a Rest Mismatch Minimization Objective<\/strong><\/a><\/p>\n

Yasin G\u00f6\u00e7g\u00fcn, Department of Industrial Engineering, School of Engineering and Natural Sciences, \u0130stanbul Medipol University, Beykoz, \u0130stanbul,T\u00fcrkiye<\/p>\n

Niyazi O Bak\u0131r, Department of Mechanical & Industrial Engineering, College of Engineering, Sultan Qaboos University, Al-Khoudh, Sultanate of Oman<\/p>\n

ID 39     Structural Diagnosis, Analysis, and Proposals for the Guinea Pig (Cavia Porcellus) Meat Market in the<\/a><\/strong> Andean Region<\/a><\/strong><\/p>\n

Akemi Milary Bazan-Sambrano, V\u00edctor Andr\u00e9 Franco-Qui\u00f1onez and Marcos Fernando Ruiz-Ruiz, Carrera de Ingenier\u00eda Industrial, Facultad de Ingenier\u00eda, Universidad de Lima, Per\u00fa<\/p>\n

ID 40     Automatic Detection Of COVID-19 And Other Pneumonia from Chest X-ray Images Using Convolutional Neural Networks and Collection of COVID-19 Affected Chest X-ray Images <\/strong><\/a><\/u><\/strong><\/p>\n

Md. Tanvir Mahmud Prince, Muhammad Masud Karim, Fariha Sadeque and Mohammad Nahid Zahangir, Department of Electrical and Electronics Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka 1205, Bangladesh<\/p>\n

ID 41     Investigation of the Effect of Cutting Parameters on Surface Roughness in Dry Turning of Hardened<\/a><\/strong> Steel Using the Taguchi Method<\/a><\/strong><\/p>\n

Rotan Kumar Saha, Md. Touhiduzzaman, Golap Hossain, Md. Mustafizur Rahman, Narayan Chandra Roy, Md Shazzad Hossain, Md. Tutul Islam, Md Atikur Rahman and Mohammad Sohel, Department of Industrial and Production Engineering, Dhaka University of Engineering and Technology, Gazipur 1700, Bangladesh<\/p>\n

ID 42     Feasibility of Employing Prestressed Precast Concrete Pavement with Welded Wire Mesh: A Sustainable Solution<\/strong><\/a><\/u><\/strong><\/p>\n

Md. Tariqul Islam, Postgraduate Student, Department of Civil Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh<\/p>\n

Manshib Tazowar, Postgraduate Student, Department of Civil Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh<\/p>\n

Mohd Salman Mazhar, Senior Research Assistant, Bureau of Research, Testing and Consultation (BRTC-BUET), Dhaka, Bangladesh<\/p>\n

Dr. Ishtiaque Ahmed, Professor, Department of Civil Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh<\/p>\n

ID 44     Application of the Six Sigma Method on Improving the Quality of Plastic Sacks<\/strong><\/a><\/p>\n

Nandita Priya, Mohammad Agung Saryatmo and Lithrone Laricha Salomon, Department of Industrial Engineering, Tarumanagara University, Jakarta, Indonesia<\/p>\n

ID 45     Quality Improvement of Ceramic Insulator with Six Sigma Method<\/strong><\/a><\/u><\/strong><\/p>\n

Chelvy Pricilia, Lithrone Laricha Salomon and Mohammad Agung Saryatmo, Department of Industrial Engineering, Universitas Tarumanagara, Jakarta, Indonesia<\/p>\n

ID 46     Analysis of Overall Equipment Effectiveness on Production Machines Using Autonomous Maintenance<\/strong><\/a><\/p>\n

Theo Richard, Mohammad Agung Saryatmo and Lithrone Laricha Salomon, Department of Industrial Engineering, Tarumanagara University Jakarta, Indonesia<\/p>\n

ID 47     Analysis Of Production Processes On Heat Resistant Products Using FMEA & FTA Methods To Improve Product Quality<\/strong><\/a><\/p>\n

Fadel Ramadhan, Helena Juliana K, Lithrone Laricha Salomon and Mohammad Agung Saryatmo, Industrial Engineering Study Program, Tarumanagara University, Indonesia<\/p>\n

ID 48     Development and Analysis of Rechargeable Smart-Shoe for Visually Impaired People<\/strong><\/a><\/p>\n

Pranta Dutt, Mahmud Alam Pranto, Firoz Ahmed Chowdhury and M S Rabbi, Department of Mechanical Engineering, Chittagong University of Engineering and Technology, Chattogram-4349, Banglades<\/p>\n

ID 50     Sustainable Value Stream Mapping to Increase Effectiveness and Efficiency in PE-Type Plastic Pellet Companies<\/strong><\/a><\/p>\n

Chika Gabriela Keren, Lithrone Laricha Salomon and Wilson Kosasih, Department of Industrial Engineering, Faculty of Engineering, Universitas Tarumanagara, Jakarta, 11440, Indonesia<\/p>\n

ID 51     Sustainable Supplier Selection for Agro-Food Industry of an Emerging Economy: A Fuzzy Topsis Approach<\/strong><\/a><\/p>\n

Mohaddis Hossain and Fatin Ihsan Hredoy, Department of Mechatronics and Industrial Engineering, Chittagong University of Engineering and Technology (CUET), Chittagong, Bangladesh<\/p>\n

Jamal Uddin Ahamed, Head, Department of Mechatronics and Industrial Engineering, Professor, Department of Mechanical Engineering, Faculty of Mechanical Engineering, Chittagong University of Engineering and Technology (CUET), Chittagong, Bangladesh<\/p>\n

ID 52     Analysis Of Quality Control in Clothing Products Using the Six Sigma Method <\/strong><\/a><\/u><\/strong><\/p>\n

Tharisya Sanrio Putri, Ahmad, and Mohammad Agung Saryatmo, Department of Industrial Engineering, Tarumanagara University, Jakarta, Indonesia<\/p>\n

ID 53     Waste Reduction with Lean Manufacturing on the Garment Production Line of PT XYZ<\/strong><\/a><\/p>\n

Aifa Raviva Surdadi, Ahmad, and Mohammad Agung Saryatmo, Department of Industrial Engineering, Universitas Tarumanagara, Jakarta, Indonesia<\/p>\n

ID 54     Customer demand Forecasting to reduce the raw material shortage and opportunity cost<\/strong><\/a><\/p>\n

Narinthon Sathanasaowaphak, School of Industrial Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima, Thailand<\/p>\n

ID 55     Rapid Upper Limb Assessment (RULA) Technique for Posture Correction in Worker Reducing Musculoskeletal Disorders and Enhancing Work Efficiency<\/strong><\/a><\/p>\n

Syam Babu Bokka, Department of Mechanical Engineering, National Institute of Technology Manipur, Imphal, India Anil Kumar Birru, Department of Mechanical Engineering, National Institute of Technology Manipur, Imphal, India Netai Chandra Dey, Department of mining engineering, IIEST Shibpur, Kolkata, India<\/p>\n

Amandeep Kaur, Department of Conservative Dentistry and Endodontics, Oral Health Sciences Centre, PGIMER, Sangrur, Punjab, India<\/p>\n

ID 56 Revolutionizing Healthcare System through Lean Thinking<\/a><\/strong><\/p>\n

Mohammed Raihan Uddin, Department of Industrial & Production Engineering, Bangladesh University of Textiles (BUTEX), Dhaka-1208, Bangladesh<\/p>\n

Prof. Dr. Mohammad Asif Salam, Faculty of Economics and Business Administration, King Abdulaziz University, Jeddah, Saudi Arabia<\/p>\n

ID 57     Ergonomics and Industry 4.0 – Review and Prospectives in Bangladesh <\/strong><\/a><\/u><\/strong><\/p>\n

Mohammad Iqbal, Professor, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh Md Annin Hasan and Md Anas Sikdar, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh<\/p>\n

ID 75     Revolutionizing Urban Life: Smart Mobility and Smart Cities in Bangladesh<\/strong><\/a><\/u><\/strong><\/p>\n

Quazi Monjur E-Elahi, Syeda Umme Habiba and Md Sufi Ahmed Talukder, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh<\/p>\n

ID 76     A Comparative Study Between Unit Production System and Progressive Bundle System in Apparel Production<\/strong><\/a><\/p>\n

Sajid Hossain, MD. Mahmudul Hasan, Bebe Fatema Bristy, Binu Shejuti Dey and Umme Habiba Saima, Department of Industrial & Production Engineering, Faculty of Textile Management & Business Studies, Department of Apparel Engineering, Faculty of Fashion Design & Apparel Engineering Bangladesh University of Textiles (BUTEX), 92 Shaheed Tajuddin Ahmed Avenue, Tejgaon Industrial Area, Dhaka – 1208, Bangladesh<\/p>\n

Dr. Mahmuda Akter, Associate Professor & Head, Department of Apparel Engineering, Faculty of Fashion Design & Apparel Engineering, Bangladesh University of Textiles (BUTEX), 92 Shaheed Tajuddin Ahmed Avenue, Tejgaon Industrial Area, Dhaka – 1208, Bangladesh<\/p>\n

Sazid Elahi, Assistant Professor, Department of Apparel Engineering, Faculty of Fashion Design & Apparel Engineering, Bangladesh University of Textiles (BUTEX), 92 Shaheed Tajuddin Ahmed Avenue, Tejgaon Industrial Area, Dhaka – 1208, Bangladesh<\/p>\n

ID 77     Analysis of Performance Measurement Using the Balanced Scorecard and Objective Matrix Method at PT XYZ<\/strong><\/a><\/p>\n

Louis Cassilas Setiawan, Mohammad Agung Saryatmo and Juliana Helena Kristina, Department of Industrial Engineering, Tarumanagara University Jakarta, Indonesia<\/p>\n

ID 78     Ergo Synergy: Modeling the Interplay of Environmental Ergonomic Factor, Workstation Design, and Physical Comfort on Productivity through Structural Equation Modeling<\/strong><\/a><\/u><\/strong><\/p>\n

Hazel V. Agustin, Dr. Ryan Jeffrey Curbano and Dr. James Louie Meneses, Graduate School, Lyceum of the Philippines University, Batangas City, Philippines<\/p>\n

ID 79     Optimizing Service Operations in Banking System: A Discrete Event Simulation Modeling Approach<\/strong><\/a><\/p>\n

Md. Asfaq Jamil, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh<\/p>\n

Md. Ahsanul Mobin, Department of Textile Engineering, Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh<\/p>\n

Oyshik Bhowmik, Lecturer, Department of Industrial and Production Engineering, National Institute of Textile Engineering and Research, Dhaka, Bangladesh<\/p>\n

ID 80     Sustainable Agricultural Supply Chain Management: A Strategic Roadmap for Development in Bangladesh’s Diverse Terrain<\/strong><\/a> <\/u><\/strong><\/p>\n

Quazi Monjur E-Elahi, Md Sanadiule Shorif Ullash and Rawnak Labiba Noor, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh<\/p>\n

ID 81     Effect of Alkali Treatment on Mechanical Properties of Non-woven Jute Fiber Reinforced Epoxy Composite<\/strong><\/a><\/p>\n

Raju Ahammad, Md Arifuzzaman and Md Shariful Isalm, Faculty of Mechanical Engineering, Khulna University of Engineering & Technology, Khulna-9203, Bangladesh<\/p>\n

ID 82     Beyond the Gridlock: A Comparative Study of HTMS and ATMS in Achieving Sustainable Traffic Solutions for Dhaka City<\/strong><\/a><\/u><\/strong><\/p>\n

Ibrar Amin, Ishrakul Tahmid and Faiza Mahmood Aroni, Undergraduate Students in Computer Science and Engineering (CSE), American International University-Bangladesh (AIUB), Dhaka 1229, Bangladesh<\/p>\n

Md. Mortuza Ahmmed, Associate Professor, Department of Mathematics, American International University-Bangladesh (AIUB), Dhaka 1229, Bangladesh<\/p>\n

ID 84     Experimental Design of an Energy-Saving Egg Incubator System Using Fuzzy-PID Controller<\/strong><\/a><\/p>\n

Md. Mizanur Rahman, Nur Mohammad, Robin Barua, Md.Tazul Islam and Aklima Akter Akhi, Institute of Energy Technology, Department of Electrical and Electronic Engineering, Department of Mechanical Engineering, Department of Statistics, Chittagong University of Engineering & Technology, Chattogram, Bangladesh, Jahangir Nagar University, Bangladesh<\/p>\n

ID 85     Valorisation of Piggery Sludge to Biogas to Bio Solids Through Anaerobic Digestion<\/strong><\/a><\/p>\n

M. M. Manyuchi, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa<\/p>\n

T.N. Mutusva, Department of Mathematical Sciences, School of Industrial Sciences and Technology, Harare Institute of Technology, Zimbabwe<\/p>\n

N. Sukdeo, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa<\/p>\n

ID 86     Community Empowerment Consideration On-Site Location Selection Using AHP and TOPSIS Methods<\/strong><\/a><\/p>\n

Yoga Satria and Djoko Sihono Gabriel, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Depok, 16424, Indonesia<\/p>\n

ID 87     Numerical Narratives: Statistical Analysis of Healthcare Institutions in Bangladesh<\/strong><\/a><\/p>\n

K. M. Tahsin Kabir, Md. Moynul Islam and Mian Mohammad Rassel, Undergraduate Students in Computer Science and Engineering (CSE), American International University-Bangladesh (AIUB), Dhaka 1229, Bangladesh<\/p>\n

Md. Mortuza Ahmmed, Associate Professor, Department of Mathematics, American International University-Bangladesh (AIUB), Dhaka 1229, Bangladesh<\/p>\n

ID 88     Drone Distribution Model for Emergency Medicine Distribution to Reduce Delivery Time and Costs:<\/a><\/strong> Case of the Peruvian Health Sector<\/a><\/strong><\/p>\n

David Kevin Jenss Senador and Pavel Alexander Flores Caycho, Facultad de Ingenier\u00eda, Carrera de Ingenier\u00eda Industrial, Universidad de Lima, Per\u00fa<\/p>\n

Carlos-Augusto Liz\u00e1rraga-Portugal, Research Professors, Facultad de Ingenier\u00eda, Carrera de Ingenier\u00eda Industrial, Universidad de Lima, Per\u00fa<\/p>\n

ID 89     Finding Out the Issues Behind Predicament of Sugar Industry in Bangladesh: A Case Study on Rajshahi Sugar Mills<\/strong><\/a><\/u><\/strong><\/p>\n

Tabassum Afrin, Nayan Chakraborty and Md. Rakibul Islam, Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology (RUET), Rajshahi-6204, Bangladesh<\/p>\n

ID 90     Statistical Modeling of Air Quality Determinants in Urban Dhaka<\/strong><\/a><\/u><\/strong><\/p>\n

Mst. Nadiya Noor and Ekramul Haque, Undergraduate Students in Computer Science and Engineering (CSE), American International University- Bangladesh (AIUB), Dhaka 1229, Bangladesh<\/p>\n

Md. Mortuza Ahmmed, Associate Professor, Department of Mathematics, American International University-Bangladesh (AIUB), Dhaka, Bangladesh<\/p>\n

ID 92     Application of Brewer Spent Grain from the Beer Industry as a Unique Substrate for the Cultivation of Pleurotus Ostreatus Mushrooms<\/strong><\/a><\/p>\n

Alejandro S. Lozano Rocha and Piero E. Aguilar Luna, Facultad de Ingenier\u00eda, Carrera de Ingenier\u00eda Industrial, Universidad de Lima, Per\u00fa<\/p>\n

Carlos-Augusto Liz\u00e1rraga-Portugal, Research Professor, Facultad de Ingenier\u00eda, Carrera de Ingenier\u00eda Industrial, Universidad de Lima, Per\u00fa<\/p>\n

ID 93     Impact of Base Beam Length on Piezoelectric Cantilever Energy Harvesters: A Numerical Investigation<\/strong><\/a><\/p>\n

Md. Mohiuddin, Lecturer, Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh<\/p>\n

Kazi Mostafijur Rahman, Professor, Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh<\/p>\n

Zahir U. Ahmed, Head, Department of Mechanical Engineering, Professor, Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh<\/p>\n

Riaz Ahmed, Associate Professor, Department of Mechanical Engineering, University of Wisconsin, Green Bay, Wisconsin-54311, United States<\/p>\n

ID 94     Utilizing The Analytic Hierarchy Process for Decision-Making in the Indonesian Marine Police: A Case Study<\/a><\/strong> in Hospital Ship Selection for Improved Security and Functional Capacity<\/a><\/strong><\/p>\n

Panji Pratama Hendra Surya, Industrial Engineering Department, Faculty of Engineering, University of Indonesia, Depok, Indonesia<\/p>\n

Farizal F, Department of Industrial Engineering, Faculty of Industrial Engineering, University of Indonesia, Depok, Indonesia<\/p>\n

ID 95  Navigating Lean Practice Challenges; Enhancing Efficiency in Lead Time Reduction within Bangladesh’s Pharmaceutical Industry<\/strong><\/a><\/p>\n

 <\/strong>Mohammad Jawadul Hoque Rohan, Md. Arafat Hossain Emu, Quazi Monjur E-Elahi and Israt Ara Hossain, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh<\/p>\n

ID 96     Designing of an Automatic Object Identifier Based on Probabilistic Machine Learning: An Experimental Study<\/strong><\/a><\/u><\/strong><\/p>\n

Md Kamrul Hasan Chowdhury and Basudeb Biswas, Department of Mechanical Engineering, Rajshahi University of Engineering and Technology Rajshahi, Bangladesh<\/p>\n

Spandan Basak Payel and Md. Tanvir Siraj, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology Dhaka, Bangladesh<\/p>\n

Debashis Biswas, Department of Electrical Engineering, National Institute of Technology, Silchar, India<\/p>\n

ID 100   Unlocking the Potential of Digital Technologies to Support Industrial Symbiosis: A literature review.<\/strong><\/a><\/p>\n

Ahmed Mehrem and Bernd Noche, Institute of Transport Systems and Logistics, Factory of Engineering, University of Duisburg-Essen, Forsthausweg 2, 47057 Duisburg, Germany<\/p>\n

ID 101   The Categorization of Surface Irregularities Presents on the Hot-Rolled Steel Strip, Encompassing Six Distinct Types of Surface Anomalies, Achieved through the Implementation of Vision Transformer<\/strong><\/a><\/u><\/strong><\/p>\n

Naimur Asif Borno and Anik Ghosh, Department of Mechatronics Engineering, Rajshahi University of Engineering & Technology (RUET), Rajshahi, Bangladesh<\/p>\n

Durjoy Datta Mazumder, Department of Materials Science & Engineering, Rajshahi University of Engineering & Technology (RUET), Rajshahi, Bangladesh<\/p>\n

ID 103   A Comprehensive Review on Materials Used in Various Specialized Areas and Disciplines of Dentistry: Analyzing Their Economic Feasibility and Biocompatibility.<\/strong><\/a><\/p>\n

Durjoy Datta Mazumder, Department of Materials Science & Engineering, Rajshahi University of Engineering and Technology (RUET), Rajshahi, Bangladesh<\/p>\n

ID 104   Assessing Barriers to Circular Supply Chain Management in the Plastic Industry of Bangladesh<\/strong><\/a><\/p>\n

Md Simran Sadid, Md. Arafat Hossain Emu, Quazi Monjur E-Elahi and Jannatul Ferdoush Oishe, Department of Mechanical and Production Engineering Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh<\/p>\n

ID 105   Computer Vision Based Automated Attendance System Using Face Recognition<\/strong><\/a><\/u><\/strong><\/p>\n

Abu Salman Shaikat, Bharti School of Engineering and Computer Science, Laurentian University, Canada<\/p>\n

Molla Rashied Hussein, Department of Computer Science and Engineering, University of Asia Pacific, Dhaka, Bangladesh<\/p>\n

Rumana Tasnim and Ahmed Farhan, Department of Mechatronics Engineering, World University of Bangladesh, Dhaka, Bangladesh<\/p>\n

Ahsan Md. Sajid Khan, Bharti School of Engineering and Computer Science, Laurentian University, Canada<\/p>\n

Anowar Hossain Mokhtar and Md Mizanur Rahman, Department of Mechatronics Engineering, World University of Bangladesh, Dhaka, Bangladesh<\/p>\n

ID 106   IoT and GSM Integrated Automated Water Pump Controlling System for Prevention of Water Wastage <\/strong><\/a><\/u><\/strong><\/p>\n

Rumana Tasnim, Ahmed Farhan, Rezwan Us Saleheen, Md Zonayed, Enamul Hoq, Farhan Mahbub and Md Mizanur Rahman, Department of Mechatronics Engineering, World University of Bangladesh<\/p>\n

Molla Rashied Hussein, Department of Computer Science and Engineering, University of Asia Pacific<\/p>\n

ID 107   Investigating Critical Factors for Implementing Safety Measures in RMG Industry Using ISM-MICMAC<\/strong><\/a><\/u><\/strong><\/p>\n

Basit Mahmud Shahriar, Lecturer, Department of Industrial and Production Engineering, Military Institute of Science and Technology (MIST) Faculty of Mechanical Engineering, Dhaka, Bangladesh<\/p>\n

Department of Industrial and Production Engineering (IPE), Bangladesh University of Engineering and Technology (BUET), Dhaka \u2013 1000, Bangladesh<\/p>\n

Md. Sajib Milki, Lecturer, Department of Industrial Engineering (IE), BGMEA University of Fashion & Technology (BUFT), Dhaka \u2013 1230, Bangladesh<\/p>\n

 Department of Industrial and Production Engineering (IPE), Bangladesh University of Engineering and Technology (BUET), Dhaka \u2013 1000, Bangladesh<\/p>\n

ID 109   Applying project management to digital marketing platforms<\/strong><\/a><\/p>\n

Professor Afaf Bensghir, MADEO Laboratory, High School of Technology, Med First University, Morocco<\/p>\n

Leila BAKHTI, PhD Student, MADEO Laboratory, High School of Technology, Med First University, Morocco<\/p>\n

Professor ERRAMDANI Mohammed, MATSI Laboratory, High School of Technology, Med First University, Morocco<\/p>\n

ID 116   Exploring the Barriers to Circular Supply Chain Implementation in the Electric Battery Industry:<\/a><\/strong> A Perspective of Developing Country<\/a><\/strong><\/p>\n

Md. Sajib Milki, Department of Industrial Engineering, BGMEA University of Fashion and Technology, Dhaka-1230, Bangladesh Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh<\/p>\n

Md. Ariful Islam, Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology, Rajshahi-6204, Bangladesh<\/p>\n

ID 120   Planning For Procurement of Raw Materials and Supplies for Small and Medium Enterprise<\/strong><\/a><\/p>\n

Christian, Lina Gozali and Lamto Widodo, Industrial Engineering Department, Faculty of Engineering, Tarumanagara University, Jakarta, Indonesia<\/p>\n

ID 121   Designing Orthopaedic Seat Cushion<\/strong><\/a><\/p>\n

Ambrosius Milano, Lamto Widodo and Lina Gozali, Industrial Engineering Study Program Tarumanagara University, Indonesia<\/p>\n

ID 122   Revolutionizing Industry: Unveiling Engineered Bamboo Mass Production for Sustainable Economic Growth<\/a><\/strong> in Bangladesh<\/a><\/strong><\/p>\n

Manshib Tazowar, Postgraduate Student, Department of Civil Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh<\/p>\n

Abu Fatin Md Muhtasimul Islam, Department of Industrial and Production Engineering, Graduate, Department of Industrial and Production Engineering, Faculty of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh<\/p>\n

ID 123   Smart Charging Infrastructure Optimization for Electric Vehicles Using Data Science and Predictive Analytics<\/strong><\/a><\/p>\n

Toukir Ahamed, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh<\/p>\n

Dr. Ferdous Sarwar, Professor and Head of the Department, Industrial and Production Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh<\/p>\n

ID 125   Study the Effect of Wire Mesh Screen on Solar Chimney Assisted Natural Ventilation System<\/strong><\/a><\/p>\n

Md. Mizanur Rahman, Naheen Ibn Akbar, Rezwan us Salehen, Rumana Tasnim and Salim Sadman Bishal, Department of Mechatronics Engineering World University of Bangladesh, Avenue 6 & Lake Drive Road, Sector: 17\/H, Uttara, Dhaka \u2013 1230, Bangladesh<\/p>\n

Mohammad Mashud, Professor, Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh<\/p>\n

ID 126   Examine How a Turbine Ventilator Affects Chimney Performance<\/strong><\/a><\/u><\/strong><\/p>\n

Md. Mizanur Rahman, Enamul Hoq, Md. Sadatuzzaman Saagoto, Protik Barua and Farhan Mahbub, Department of Mechatronics Engineering, World University of Bangladesh, Avenue 6 & Lake Drive Road, Sector: 17\/H, Uttara, Dhaka \u2013 1230, Bangladesh<\/p>\n

Mohammad Mashud, Professor, Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh<\/p>\n

ID 127   Investigate How Inlet Geometry Affects Vortex Power<\/strong><\/a><\/p>\n

Md. Mizanur Rahman, Mustafizur Rahman, Masud Rana, Ahmed Farhan and Md. Sohel Rana, Department of Mechatronics Engineering, World University of Bangladesh, Avenue 6 & Lake Drive Road, Sector: 17\/H, Uttara, Dhaka \u2013 1230, Bangladesh<\/p>\n

Mohammad Mashud, Professor, Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh<\/p>\n

ID 128   Optimization of Wire EDM Process Parameters in the Fabrication of Spur Gear Using Taguchi Technique<\/strong><\/a><\/u><\/strong><\/p>\n

Khondoker Safin Kaosar Saad, Md Omar Al Javed, Zayed Ur Rahman, Tasfia Saba and Adib Bin Rashid, Department of Industrial and Production Engineering, Military Institute of Science and Technology (MIST), Dhaka-1216, Bangladesh<\/p>\n

ID 129   Numerical Investigation of Flax\/Bamboo Fiber Reinforced Hybrid Composites under Tensile Load<\/strong><\/a><\/p>\n

Durjoy Roy, Md Tahmid Hasan, Md Shariful Islam and Md Arifuzzaman, Department of Mechanical Engineering, Khulna University of Engineering & Technology, Khulna-9203, Bangladesh<\/p>\n

ID 131   Development of Lightweight Thermal Insulation Board: A Study on Physical and Mechanical Properties of<\/a><\/strong> Sandwich Board Made of Perlite, Polystyrene, and Formica Sheet<\/a><\/strong><\/p>\n

Mehedhi Hasan and G M Ismail Hossain, Department of Mechanical Engineering, Sonargaon University (SU), Dhaka-1205, Bangladesh<\/p>\n

Md Aasef Azhar Khan, Department of Mechanical Engineering, Khulna University of Engineering & Technology, Khulna-9203, Bangladesh<\/p>\n

Md Ahatashamul Haque Khan Shuvo, Department of Mechanical Engineering, Sonargaon University (SU), Dhaka-1205, Bangladesh<\/p>\n

Torikul Islam, Department of Biomedical Engineering (BME), New Jersey Institute of Technology, Newark, NJ, USA<\/p>\n

Md Tahmid Hasan, Department of Mechanical Engineering, Khulna University of Engineering & Technology, Khulna-9203, Bangladesh<\/p>\n

ID 146   Transparency in House Rent of Dhaka: Explainable AI Based Predictive Framework<\/strong><\/a><\/u><\/strong><\/p>\n

Taeef Najib, Sidetrek, Dhaka, Bangladesh.<\/p>\n

Fahim Muntasir, BRAC University, Dhaka, Bangladesh<\/p>\n

Wasif Al Wazed, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh<\/p>\n

ID 147   Prioritizing Sustainable Indicators for Mineral Industry of Pakistan<\/strong><\/a><\/u><\/strong><\/p>\n

Saleem Raza Chalgri, Department of Mining Engineering, Mehran University of Engineering and Technology Jamshoro<\/p>\n

Muhammad Saad Memon and Shakeel Ahmed Shaikh, Department of Industrial Engineering and Management, Mehran University of Engineering and Technology Jamshoro<\/p>\n

Fahad Irfan Siddiqui, Department of Mining Engineering, Mehran University of Engineering and Technology Jamshoro<\/p>\n

ID 149   Leveraging Digital Twins: A Framework for Sustainable Supply Chain of Perishable Goods in Bangladesh<\/strong><\/a><\/p>\n

Mohammad Jawadul Hoque Rohan, Sajid Hassan Sejan and Fairuj Homayra, B.Sc. in Industrial & Production Engineering (Ongoing), Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology, 141-142, Love Road, Tejgaon I\/A, Dhaka-1208, Bangladesh<\/p>\n

Dr. M. Azizur Rahman, Associate Professor, Department of Mechanical and Production Engineering, Faculty of Mechanical and Production Engineering. Ahsanullah University of Science and Technology, 141-142, Love Road, Tejgaon I\/A, Dhaka-1208, Bangladesh<\/p>\n

Dr. Md. Shahnewaz Bhuiyan, Associate Professor, Department of Mechanical and Production Engineering, Faculty of Mechanical and Production Engineering, Ahsanullah University of Science and Technology, 141-142, Love Road, Tejgaon I\/A, Dhaka-1208, Bangladesh<\/p>\n

ID 151   Post Covid-19 Complications Detection Using ML Review Paper<\/strong><\/a><\/u><\/strong><\/p>\n

Syed Mominin Islam Tamim, Student of American International University-Bangladesh (AIUB) and Jr. Software Engineer at Venus IT Ltd., Dhaka, Bangladesh<\/p>\n

MD. Nadim Hasan, Student of American International University-Bangladesh (AIUB), Dhaka, Bangladesh<\/p>\n

Md. Tafsimul Islam Tanzid, Student of American International University-Bangladesh (AIUB) and Jr. Software Engineer at Divergent Technologies Ltd., Dhaka, Bangladesh<\/p>\n

Tanvir Ahmed, Lecturer, American International University-Bangladesh (AIUB), Dhaka, Bangladesh<\/p>\n

ID 152   Predicting Post-COVID Complications of Bangladeshi People Using Machine Learning: Insights, Models,<\/a><\/strong> and Future Directions<\/a><\/strong><\/p>\n

MD Nadim Hasan, Student of American International University-Bangladesh (AIUB), Dhaka, Bangladesh<\/p>\n

Syed Mominin Islam Tamim, Student of American International University-Bangladesh (AIUB) and Jr. Software Engineer at Venus IT Ltd., Dhaka, Bangladesh<\/p>\n

Md. Tafsimul Islam Tanzid, Student of American International University-Bangladesh (AIUB) and Jr. Software Engineer at Divergent Technologies Ltd., Dhaka, Bangladesh<\/p>\n

Tanvir Ahmed, Lecturer, American International University-Bangladesh (AIUB), Dhaka, Bangladesh<\/p>\n

ID 153   A Comparative Analysis of Bangladesh’s Energy Emissions: Implications for Carbon Neutrality and Sustainability<\/strong><\/a><\/p>\n

Shuvra Majumder, Institute of Energy Technology, Chittagong University of Engineering and Technology, Chattogram, Bangladesh<\/p>\n

Spandan Basak Payel and Md. Tanvir Siraj, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh<\/p>\n

Mahbubur Rahaman, Department of Statistics, Jahangirnagar University, Dhaka 1342, Bangladesh<\/p>\n

Md Kamrul Hasan Chowdhury, Department of Mechanical Engineering, Rajshahi University of Engineering and Technology Rajshahi, Bangladesh<\/p>\n

ID 154   Optimized Drone Navigation: Integrating Neural Networks with Ant Colony Optimization for Precise<\/a><\/strong> and Fuel-Efficient Delivery Routes<\/a><\/strong><\/p>\n

Arnob Paul and Rafat Ferdaush, Dept. of Electrical and Electronic Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh<\/p>\n

ID 155   Design, Fabrication, and Performance Analysis of an Ergonomically Designed Self-Cleaning Dining Table<\/strong><\/a><\/u><\/strong><\/p>\n

Syed Md Naieem, Samina Rahman Shuchi, Farhan Rahat Shaiket, Parsha Mohsina Promi, Jahanara Akter Trina and Adib Bin Rashid, Department of Industrial and Production Engineering, Military Institute of Science and Technology (MIST), Dhaka-1216, Bangladesh<\/p>\n

ID 157  Modeling and Design Analysis of Tesla Model S Powertrain with A Concentration Towards Battery Management System and Regenerative Braking<\/strong><\/a><\/p>\n

Captain Fahim Foysal Arnob, Abdullah All Mamun Anik and Mosammat Sadia Akter Moon, Department of Industrial and Production Engineering, Military Institute of Science and Technology (MIST), Dhaka<\/p>\n

Department of Mechanical Engineering, Military Institute of Science and Technology (MIST), Dhaka, Department of Computer Science and Engineering, University of Chittagong, Chattogram, Bangladesh<\/p>\n

ID 158   Interrelation of Lipoprotein(a) Concentrations with The Intensity of Recurrent Coronary Strokes in CAD Patients with Assorted LDL-C Levels<\/strong><\/a><\/p>\n

Hasnim Naznin Hima, Intern Doctor, Bangabandhu Sheikh Mujib Medical College Hospital, Faridpur, Dhaka, Bangladesh<\/p>\n

Foyez Ahmad, Department of Mechanical and Production Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur, Dhaka, Bangladesh<\/p>\n

ID 164   Machine Learning Techniques in Vehicle Routing Problem<\/strong><\/a><\/p>\n

Yousra Omari Alaoui, Phd student, University Moulay Ismail Meknes, Morocco<\/p>\n

Mustapha Oudani and Kenza Oufaska, TICLab Laboratory, LERMA Laboratory, International University of Rabat Rabat, Morocco<\/p>\n

Khalid El Yassini, IA Laboratory, Faculty of Sciences Moulay Ismail University Meknes, Morocco<\/p>\n

ID 165   Community Service: Assistance of Water Hyacinth Craftsmen to Design Ergonomic Chairs, Bantul, Yogyakarta<\/strong><\/a><\/u><\/strong><\/p>\n

Lina Gozali, Ronaldo Setiawan, Mario Ajipangestu and Frans Jusuf Daywin, Industrial Engineering Department, Universitas Tarumanagara Indonesia<\/p>\n

ID 166   Efficiency Improvement in Wood Beam Line Process Using Lean Manufacturing Tools in the Peruvian Sawmill Industry<\/strong><\/a><\/u><\/strong><\/p>\n

Jos\u00e9 Manuel L\u00f3pez-Acosta, Faculty of Engineering, Industrial Engineering Career, University of Lima, Peru<\/p>\n

Juan Carlos Quiroz-Flores, Research Professor, Faculty of Engineering, Industrial Engineering Career, University of Lima, Peru<\/p>\n

ID 168   Transforming Polyester Waste of Garments Industry into Energy: A Sustainable Solution for<\/a><\/strong> Resource Recovery<\/a><\/strong><\/p>\n

Mohammad Abdul Baset and Dr. Md. Abdus Shahid, Department of Textile Engineering, Faculty of Mechanical Engineering, Dhaka University of Engineering and Technology (DUET) Gazipur, Bangladesh<\/p>\n

ID 169   The Impact of the Fourth Industrial Revolution and Machine Learning on Employee Skill Sets for Sustainable Survival in the Retail Industry<\/strong><\/a><\/p>\n

Md. Habibur Rahman, Department of Mathematics, University of Chittagong, Chittagong, Bangladesh<\/p>\n

Md Aminul Islam, School of Engineering, Computing, and Mathematics, Oxford Brookes University, UK<\/p>\n

Yamin Hossain, Department of computer science and engineering, VIT-AP University, Andhra Pradesh, India<\/p>\n

Rejwan Bin Sulaiman, Lecturer, University of Northumbria, UK<\/p>\n

Md. Nayeem Chowdhury, Department of Applied Statistics, University of Dhaka<\/p>\n

Abdullah Hafez Nur, Department of Electronic and Telecommunication Engineering, International Islamic University Chittagong<\/p>\n

ID 195   Innovation Of A Flame Freeze Connector Tool For Extinguishing Fire In Forest Fires Using The VDI 2221 Method<\/strong><\/a><\/p>\n

Alyssa Felicia Wijaya Yakup, Student of Industrial Engineering, Faculty of Engineering, Tarumanagara University, Jakarta, Indonesia<\/p>\n

Frans Jusuf Daywin, Lecturer in Industrial Engineering, Faculty of Engineering, Tarumanagara University, Jakarta, Indonesia<\/p>\n

Didi Widya Utama, Lecturer in Mechanical Engineering, Faculty of Engineering, Tarumanagara University, Jakarta, Indonesia<\/p>\n

ID 196   Experimental Study on the Mechanical Properties of Woven Jute Fiber\/Human Hair Reinforced Hybrid Composite<\/strong><\/a><\/p>\n

Md Shahriar Ali, Masuka Mahnur Oishy, Md Shariful Islam and Md Arifuzzaman Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET) Khulna, Bangladesh<\/p>\n

ID 197   A Numerical Investigation of a Horizontal Spiral Coil Ground Heat Exchanger (HSGHE) for a Geothermal Heat Pump<\/a><\/strong> Using Variable Fin Characteristics<\/a><\/strong><\/p>\n

Md Aasef Azhar Khan, Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh<\/p>\n

Merajul Islam, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh<\/p>\n

G M Ismail Hossain, Department of Mechanical Engineering, Lecturer, Sonargaon University, Dhaka, Bangladesh<\/p>\n

Torikul Islam, Department of Biomedical Engineering, New Jersey Institute of Technology, Newark, NJ, USA<\/p>\n

ID 199   Aggregate Planning, MPS, And MRP of a Textile Production<\/strong><\/a><\/p>\n

Abdullah Al Rahi University of Windsor, Research and Graduate Teaching Assistant, 401 Sunset Avenue Windsor, Ontario, Canada<\/p>\n

Musabbir Hasan Sumon,  University of Windsor, 401 Sunset Avenue Windsor, Ontario, Canada<\/p>\n

Ebrahim Pichka, University of Windsor, Research and Graduate Teaching Assistant 401 Sunset Avenue Windsor, Ontario, Canada<\/p>\n

Qausar Rhaman, Business Data Analyst, Carhartt WIP. Uttara, Dhaka-1230. Bangladesh<\/p>\n

ID 227   Modification of Symbiotic Organisms Search Algorithm for Blood Distribution Problems in Pekanbaru City<\/a><\/strong> Blood Bank Unit <\/a> <\/strong><\/p>\n

Muhammad Isnaini Hadiyul Umam, Fitra Lestari, Muhammad Rizki, and Nazaruddin, Industrial Engineering Department, Faculty of Science and Technology, Universitas Islam Negeri Sultan Syarif Kasim Riau, Indonesia<\/p>\n

Muhammad Luthfi Hamzah, Information System Department, Faculty of Science and Technology, Universitas Islam Negeri Sultan Syarif Kasim Riau, Indonesia<\/p>\n

Hartono, Mathematical Education Department, Faculty of Tarbiyah and Education, Universitas Islam Negeri Sultan Syarif Kasim Riau, Indonesia<\/p>\n

Budi Azwar, Islamic Economics Department, Universitas Islam Negeri Sultan Syarif Kasim Riau, Indonesia<\/p>\n

Salmaini Yeli, Faculty of Ushuluddin, Universitas Islam Negeri Sultan Syarif Kasim Riau, Indonesia<\/p>\n

ID 228   Efficiency-Driven Cost Optimization of Apparel Supply Chain Using Data Envelopment Analysis<\/strong><\/a><\/p>\n

Imtiajur Rahman, Department of Industrial & Production Engineering, ShahJalal University of Science & Technology, Sylhet, Bangladesh<\/p>\n

Dipon Roy, Department of Industrial Engineering, Southern Illinois University Edwardsville, Edwardsville, IL 62026, USA<\/p>\n

ID 229: Modeling FDM Gear Printing: An Experimental Design-Based Mathematical Approach<\/strong><\/a><\/p>\n

Abderrahim OUDRA, Hamza ISKSIOUI, Latifa EZZINE and Haj EL MOUSSAMI, Engineering of complex systems and structures (ECSS), ENSAM, Moulay Ismail University, Meknes, Morocco<\/p>\n

ID 230   IoT Integrated Fire Prevention and Alert Systems for Garments Industries in Bangladesh<\/strong><\/a><\/p>\n

Mohammad Rezaul Karim, Sohag Kabir, Ci Lei, and Raluca Lefticaru, School of Computer Science, Artificial Intelligence and Electronics, Faculty of Engineering and Digital Technologies, University of Bradford, Bradford, United Kingdom<\/p>\n

Mohammad Abdul Baset, Department of Textile Engineering, Dhaka University of Engineering and Technology (DUET), Gazipur, Bangladesh<\/p>\n

ID 232   Experimental Investigation of Mechanical Properties of Various Natural Fiber-Reinforced Hybrid Composites.<\/strong><\/a><\/p>\n

Md. Khakan Hasan Mim, Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh<\/p>\n

Md.Anash Mia, Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh<\/p>\n

Pranto Karua, Assistant Professor, Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh<\/p>\n

ID 233   Development of Functional Jute Fabric for Food Packaging<\/strong><\/a><\/p>\n

Md. Moslem Uddin, Technological Research Wing, Bangladesh Jute Research Institute, Manik Mia Avenue, Dhaka-1207<\/p>\n

Md. Abdus Shahid, Department of Textile Engineering, Dhaka University of Engineering and Technology (DUET), Gazipur-707<\/p>\n

Mst. Aleya Nasreen, Microbiology and Biochemistry Department, Technological Research Wing, Bangladesh Jute Research Institute, Manik Mia Avenue, Dhaka-1207<\/p>\n

Mir Akmam Noor Rashid, Dyeing and Printing Division, Technological Research Wing, Bangladesh Jute Research Institute, Manik Mia Avenue, Dhaka-1207<\/p>\n

ID 234   Implementation of TQM, Service Innovation, and Risk Management in the Public Services Sector: The Case of Ministry of Industry Indonesia<\/strong><\/a><\/p>\n

Zakiyah Ash-Shofi, T Yuri M Zagloel, Industrial Engineering Department, Faculty of Engineering University of Indonesia<\/p>\n

Salemba 10430, Indonesia<\/p>\n

ID 235   AI-Based Paperless Container Delivery System; a Model for Smart Chittagong Port<\/strong><\/a><\/p>\n

Lt Col Mostafa Arif-ur Rahman, Director, Chittagong Port Authority, Bangladesh<\/p>\n

Major Md Wahidul Hoque, Deputy Director, Security, Chittagong Port Authority, Bangladesh<\/p>\n

ID 236   Strategic Energy Management: Exploring the Benefits of ISO 50001 Implementation through Case Study<\/strong><\/a><\/p>\n

Faria Haque Pushpo and Md. Kutub Uddin Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET) Khulna, Bangladesh<\/p>\n

ID 237   Mapping Blood Center Locations In Rajshahi By AHP And TOPSIS<\/strong><\/a><\/u><\/strong><\/p>\n

Md. Sifat Ibna Islam and Tomal Sarkar, Department of Industrial & Production Engineering, Faculty of Mechanical Engineering, Rajshahi University of Engineering and Technology (RUET), Rajshahi-6204, Bangladesh<\/p>\n

Md. Sazol Ahmmed, Doctorate of Philosophy (PhD) Mechanical Engineering, Missouri University of Science and Technology, Rolla, Missouri, USA<\/p>\n

ID 238   Elucidating Characteristics of Porous Twisted Tape Inserts on Heat Transfer in Internal Pipe Flow of Heat Exchanger<\/strong><\/a><\/u><\/strong><\/p>\n

Md Radwanul Kabir, Joy Ganguly, Md Sanney Ul Alam and Md. Shariful Islam, Department of Mechanical Engineering, Khulna University of Engineering & Technology, Khulna-9203, Bangladesh<\/p>\n

ID 246   Enable to Transfer of Bulk Power from Long Distances without Any Modification of the Existing Over Head Transmission Line and Only Replacing the Conductor<\/strong><\/a><\/p>\n

Md. Rokibul Alam, Senior General Manager (Engineering) BRB Cable Industries Limited, BSCIC Industrial Estate Kushtia-7000, Bangladesh<\/p>\n

ID 248   Textile Industry Revolution: Affordable IoT-Integrated SIMS for Efficient Warehousing<\/strong><\/a><\/u><\/strong><\/p>\n

Md. Sadman Sakib, Md Mehedi Hasan Mojumder, Abid Easanul Alam, Ahmed Muhiminul Haider, Saib khan Sami, Shiful Islam Bappi, Ashiqur Rahman, Department of Industrial and Production Engineering, Bangladesh University of Textiles (BUTEX)<\/p>\n

ID 249   Advancing Industrial Sustainability: A Multifunctional Ergonomic Sewing Machine Table for Enhanced<\/a><\/strong> Productivity and Worker Well-being<\/a><\/strong><\/p>\n

Md. Sadman Sakib 1, Shayan Kumar Roy 1, Md. Rakibul Hoque 1, Uchas chakrabarty 2, Sutonuka Sarker Priya 1, Shaila Akter1, Babul Chawhan 1, Department of Industrial and Production Engineering, Apparel Engineering 1, Department of Apparel Engineering 2, Bangladesh University of Textiles ( BUTEX), Tejgaon, Dhaka-1205<\/p>\n

Md. Sadman Sakib 1, Raiyan Khair Fuad 1, Faria Hasan 2, Hasibul Hasan Zim 1, Kazi Nihal Ahmed 1, Sadik Reza Khan 1, Md. Naimur Rahman 1, Sojib Sikder 1, Department of Industrial and Production Engineering 1, Bangladesh University of Textiles (BUTEX), Tejgaon, Dhaka-1208, Institute of Information Technology (IIT) 2, University of Dhaka<\/p>\n

ID 250 Advancing Textile Factory Efficiency: Implementing a Cost-Effective IoT-Based Alert System for Timely Machine Maintenance<\/strong><\/a><\/p>\n

Md. Sadman Sakib1<\/sup>, Raiyan Khair Fuad1<\/sup>, Faria Hasan2<\/sup>, Hasibul Hasan Zim1<\/sup>, Kazi Nihal Ahmed1<\/sup>, Sadik Reza Khan1<\/sup>, Md. Naimur Rahman1<\/sup>, Sojib Sikder1<\/sup>, Department of Industrial and Production Engineering1<\/sup>, Bangladesh University of Textiles (BUTEX), Tejgaon, Dhaka-1208<\/p>\n

ID 251   Real-Time Fabric Intelligence: A Modern Fusion of Machine Learning and lot in Woven Textile Analysis<\/strong><\/a><\/p>\n

Md. Sadman Sakib 1, Faria Hasan 2, Saikat Chandra Chowdhury 1, Uchas chakrabarty 3,<\/p>\n

Tasmiha Tahsin Prantika 1, Nafis Sarwar Khan 1, Zarin Sadika Rahman 1, Ahsan Turag 1, Mohammad Monir Hossain 1<\/p>\n

Department of Industrial and Production Engineering 1, Department of Apparel Engineering 3<\/p>\n

Bangladesh University of Textiles (BUTEX), Tejgaon, Dhaka-1205, Bangladesh<\/p>\n

Institute of Information Technology (IIT) 2, University of Dhaka<\/p>\n

ID 254 Sustainable Water Purification: A Solar-Driven High Pressure Seawater Membrane Filtration System<\/a><\/strong><\/p>\n

Sajid Hassan Sejan, Arman Hossain Apu and Fairuz-Al-Nafiz, B.Sc. in Industrial & Production Engineering (Ongoing), Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology, 141-142, Love Road, Tejgaon I\/A, Dhaka-1208, Bangladesh<\/p>\n

ID 255 User Acceptance of Smart Mobile Resources in Vehicular Technologies Based Upon User Experience and Comfortability: A Research Review<\/strong><\/a><\/p>\n

Tasfia Bari M.S. & Dr. Munther Abualkibash, Eastern Michigan University – College of Technology, Michigan, United States of America<\/p>\n

ID 261  Analysis of Design of Flowers and Honeybees in the Pollination Process<\/a><\/strong><\/p>\n

Pratap Sriram Sundar, Academic Director and Adjunct Professor of Operations Management (MIGM and PIILM), Indian School of Business, Mohali-140306, India<\/p>\n

Chandan Chowdhury, Senior Associate Dean, Practice Professor and Executive Director (MIGM and PLIIM), Indian School of Business, Gachibowli, Hyderabad 500111, TS, India.<\/p>\n

Sagar Kamarthi*, Professor and Director of Data Analytics Engineering, Northeastern University, 360 Huntington Avenue, Boston, MA 02115, USA<\/p>\n","protected":false},"excerpt":{"rendered":"

Proceedings – 6th Bangladesh Conference 2023 ISSN: 2169-8767 (U.S. Library of Congress)                        ISBN: 979-8-3507-1733-4 Cover Page Title Masthead Welcome Committee Table of Contents ID 6       Assessing the Implementation Challenges of Industrial IoT for the Electronics Manufacturing Industry of Bangladesh Subrata Talapatra and Ali Al Mamun, Department of Industrial Engineering and Management, Khulna University of Engineering […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"_links":{"self":[{"href":"https:\/\/ieomsociety.org\/bangladesh2023\/wp-json\/wp\/v2\/pages\/526"}],"collection":[{"href":"https:\/\/ieomsociety.org\/bangladesh2023\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/ieomsociety.org\/bangladesh2023\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/ieomsociety.org\/bangladesh2023\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ieomsociety.org\/bangladesh2023\/wp-json\/wp\/v2\/comments?post=526"}],"version-history":[{"count":244,"href":"https:\/\/ieomsociety.org\/bangladesh2023\/wp-json\/wp\/v2\/pages\/526\/revisions"}],"predecessor-version":[{"id":2458,"href":"https:\/\/ieomsociety.org\/bangladesh2023\/wp-json\/wp\/v2\/pages\/526\/revisions\/2458"}],"wp:attachment":[{"href":"https:\/\/ieomsociety.org\/bangladesh2023\/wp-json\/wp\/v2\/media?parent=526"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}