Author Index
Abbas Abdulsada, Shaymaa
Effect of Novolac wt.% on Rheological Properties of NBR/CR Blends
Abbasi, Elahe
Optimizing Durability of the High Performance Nano-Concrete Applying Taguchi Method and Desirability Function
abbasian, mohammad
A Hybrid Genetic Algorithm with Intelligent Agents for the [FJ] _m |r_i,different Priority Levels| F_max
Abd Rahman, Nurul Izzah
Wudu' (Ablution) Workstation Design Analysis for Wheelchair User in Malaysia
ABDELAZIZ, BERRADO
Enterprise architecture improvement for virtual enterprise modeling
Abdelghfour, BOURDIM
Evolution of the Von Mises Stress of a Cracked Plate
Abdella, Galal
Usage of Non-Linear Regression for Modeling the Behavior of Motor Vehicle Crash Fatality (MVF) Rate
ABDELNABI, AHMED NOUR
Energy-Based Aggregate Production Planning For Porcelain Tableware Manufacturer in Egypt
Abderrahmane, MELLAK
DESIGN AND PERFORMANCE OF THE WATER-BASED DRILLING MUD IN THE SECOND PHASE, THE OIL FIELDS OF HASSI MESSAOUD.
Abdul Hamid, Suhaila
What Drives A Successful Kaizen Implementation? An Insight from Malaysian Automotive Manufacturers
Abdul Jaliel , Hussam Ed.
Economic Analysis of Scale Removal Utilizing Chemical and Pressure-Difference Mechanical Methods
Abniki, Hadi
Impacts of Safety Performance and Culture on Work-Related Accidents: A System Dynamics Dynamics Model
Abooie, Mohammad-Hossein Abooie
Investigating the Effectiveness of Entrepreneurial Marketing Aspects on the Success of Knowledge-Based Companies: A Case Study
ABOUABDELLAH, Abdellah
E-Kanban the new generation of traditional Kanban system, and the impact of its implementation in the enterprise
ABOULOIFA, Abdelmajid
A Passivity-based Control and Simulation for double cascade DC/DC Converter with a fuel cell
Acosta Alvarez, Estefani Liseth
WASTE REDUCTION IN A TOAST PRODUCTION LINE USING SIX SIGMA METHODOLOGY
Afshari, Ali Reza
Flight Arrival Simulation
Agrawal, Chandni
Servicification Through Supply Chain Segmentation-One physical supply chain, multiple virtual supply chains
Ahadiat, Mohammad Reza
Mehriz citizens' point of view in relation to the influence of Islamic Azad University Mehriz center on academic, cultural, political and economic
Ahmad, Mohd Suhaimi
The effects of location, capacity, technology and integration on operational flexibility: A service industry perspective
Ahmadi, Abbas
Huristicaly long-term money exchange rates forecasting for low technological in progress developing countries
Ahmadi, Mohammad
Performance Evaluation and Comparing of Big Data Platforms on Implementing K-Nearest Neighbors (K-NN) Algorithm
Ahmadvand, Alimohammad
Impacts of Safety Performance and Culture on Work-Related Accidents: A System Dynamics Dynamics Model
AHMED, SHARAF ELDIN HAMED
Ranking Critical success factors for sustaining Total Quality Management implementation in Sudan
Ahmed, Syed Tanveer
A Meta-Heuristic Clustering Model to Optimize City-Logistics Resource Requirements considering First Mile and Last Mile Value Stream Map
ahmedouamar, madjid
Des indicateurs et ratios financiers et non financ
Aigbavboa, Clinton
BRIDGING THE GAPS OF CONSTRUCTION MARKETING FRAMEWORKS FOR CONSTRUCTION BUSINESS ENTERPRISES
Aijazuddin, Muhammad
Performance Evaluation & Warehousing Problems Third Party Logistics
Aissaoui, Wiam
Bone Phosphate Lime - Sampling Method
Ait Kadi , Daoud
Contribution to the performance evaluation of maintenance function
Aitouche, Samia
Intellectual capital ans its measurement
aKINLABI, Esther
A Review on Battery Technologies for Electrical Energy Storage
Al Abri, Shifa
Healthcare practice and stake holders satisfaction: perspective from Oman healthcare system
Al Jabri, Buthina Hilal
Lean Sis Sigma to Improve Supply Chain Management in Oil and Gas Industry
Al Jashmi, Jijan Khamis
Lean Sis Sigma to Improve Supply Chain Management in Oil and Gas Industry
Al Khamisi, Yousuf
A Conceptual Model for a Hybrid Knowledge-Based System for Quality Management at Healthcare Environment
Al Khamisi, Yousuf
Application of the Turnaround Maintenance (TAM) Model to Oil and Gas Plants in Case Study for Heat Exchangers
Al Khodhairi, Khalid
Leverage The Relationships Between Materials Management And Operational Excellence(TQM); To Unlock The Inspired Potential
Al Kindi, mahmood
The Value of Information in Demand Prediction for New Product Design
Al Kindi, Mahmoud
Application of Product Modularity in Industry: a Case Study
Al Ramadhan, Ali
Ergonomic Weightlifting Competition by Using JACK
Al Shaqaq, Sultan
Case Study: On-Plot Piping Corrosion Analysis For GOSPs
Al Zaabi, Asma
Healthcare practice and stake holders satisfaction: perspective from Oman healthcare system
Al-Ahmari, Abdulrahman M.
An overview of electron beam melting research with bibliometric indicators
Al-Fandi, Lawrence
Analyzing Risk Factors Associated with Bariatric Patients Handling using JACK Software
AL-Habashneh, Ala’a
Awareness of industries toward implementing Concurrent Engineering (CE) culture. Case Study: Jordanian Industries
Al-Khlalifa, Khalifa
Usage of Non-Linear Regression for Modeling the Behavior of Motor Vehicle Crash Fatality (MVF) Rate
AL-Tahat, Mohammad D.
Awareness of industries toward implementing Concurrent Engineering (CE) culture. Case Study: Jordanian Industries
Al-Zuheri, Atiya
Multi-criteria Decision Making: A Case Study in the Site Selection for Satellite Assembly and Tests
Alajmi, Altaf
Analysis of a Manual Mixed-Model Assembly Line in Food Processing Industry: A Case Study
Alanzie, Ibrahim
Traffic Sign Evaluation and Redesign of Typeface in Saudi Arabia
Alarifi, Abdullah
Traffic Sign Evaluation and Redesign of Typeface in Saudi Arabia
Alavifar, Seyed Amirhossein
Effective Factors Of Customer Satisfaction In Medical Tourism Based On SERVQUAL Model And Ranking Them By Applying The TOPSIS Technique, Case study: Tehran Hotel hospital Gandhi
albassam, mohamed
Anthropometric measurement of Saudi Arabia male workers
Alhajyaseen, Wael
Usage of Non-Linear Regression for Modeling the Behavior of Motor Vehicle Crash Fatality (MVF) Rate
Alhazzaa, Abdullah
Traffic Sign Evaluation and Redesign of Typeface in Saudi Arabia
Ali, Adam Shukry
Effective Integration of Manufacturing Strategy
ALIU, JOHN
INTRODUCTION OF CONSTRUCTION EXPERIENCE TO THE CLASSROOM: WHAT APPROACHES SHOULD BE ADOPTED
Alkadi , Meshal
Anthropometric measurement of Saudi Arabia male workers
ALKAHTANI, MOHAMMED
Using FMEA Analysis for Assessing Air Conditioners Remanufacturing Processes
Alkalbani , Alghaliya Nasser Rashid
Healthcare practice and stake holders satisfaction: perspective from Oman healthcare system
Alkazaai, Lamyaa
Developing Total Productive Maintenance Model (TPM) For Small Medium Size Enterprises (SME)
Alkohlani, Abdullah
Anthropometric measurement of Saudi Arabia male workers
ALLAM, Anas
IOEM Capestone Project EMI Team
Almaktoom, Abdulaziz T.
Dynamical Modeling of Fresh Vegetables while Considering Degradation Effect on Pricing
Almonayirie, Waleed
Analysis of the Correlation between the Stock Prices Trend and the Financial Distress Risk Assessment
Almutairi, Abdulaziz
State-of-the-art lean six sigma practices
alrashan, abdalla
Accidental poisoning prevention: an anthropometric study for Saudi Arabian children
Alsuhaibani, Faisal
Traffic Sign Evaluation and Redesign of Typeface in Saudi Arabia
Altuntas, Serkan
Relationships between occupational safety culture and the physical and psychological health of employees
Alwaiel, Ibrahim
Traffic Sign Evaluation and Redesign of Typeface in Saudi Arabia
alzand, abdulrahman ahmed
Security of Data in the Utilization of E-Government
Amer , Yousef
Multi-criteria Decision Making: A Case Study in the Site Selection for Satellite Assembly and Tests
Amine, Aouatif
Inventory management optimization using lean six-sigma Case of Spare parts Moroccan company
ANASS, CHERRAFI
Development of a methodology to assist manufacturing SMEs in the selection of appropriate Green Lean Six Sigma tools
Anderazak, HAMAMA
Impact of reforestation work on vegetation cover in semi-arid region: the case of EL Green Dam to Bayad (Naama Wilaya)
Anderson, Richard
Effective Integration of Manufacturing Strategy
Anggraeni, Eka Tiyas
Applied Back Propagation Neural Network and Machine Vision for Modelling and Controlling Turmeric (Curcuma domestica Val.) Drying Process
Anisseh, Mohammad
Flight Arrival Simulation
Aourir, Meriem
A Passivity-based Control and Simulation for double cascade DC/DC Converter with a fuel cell
Arabnia, Hamid Reza
A thorough evaluation of implementing geothermal energy for producing hydrogen in Iran using Data Envelopment Analysis(DEA)
Araujo Jr., Antonio
Continual improvement in an ISO 9001:2008 certified company: a case study of a leasing and service company
ARBAOUI, Abdelaziz
Clarification of a problem abstraction process for TRIZ technical contradiction model in preliminary design
Arcidiacono, Gabriele
Conceptual framework for user based RPM
Arokiam, Ivan
Effective Integration of Manufacturing Strategy
Asmelash, Zerihun
ID 189: TECHNICAL VIABILITY OF KAOLINITE-GOETHITE SOIL FOR CHROMIUM (VI) REMOVAL FROM CONTAMINATED WATER
Ayachit, Aishwarya
Beyond Imagination
AYAD, Ibtihal
IOEM Capestone Project EMI Team
Azman, Mohamed Nor Azhari
Comparative Study of Procurement System between Industrialised Building System (IBS) and Conventional Construction in Malaysia
AZOUGAGH, Yassine
An integrated planning budgeting model for transportation in a supply chain: A case study for phosphate industry
AZOUR, Faiza
Integration of Health and Safety at Work and Environment perspectives in the Balanced Scorecard
Babu, Shekar
QFD Approach to define CSR: Indian Perspective
Backhuß, Tobias
Evaluation of cloud platforms for big data analysis
BADDAOUI, Jalil
Sustainable supply chain management in Moroccan automotive sector: An empirical study
Bahebshi , Raghad
Dynamical Modeling of Fresh Vegetables while Considering Degradation Effect on Pricing
Balaban, Muzaffer
LOGNORMAL ORDINARY KRIGING METAMODEL
Barros, Jose Glenio
Continual improvement in an ISO 9001:2008 certified company: a case study of a leasing and service company
Baseer, Majid
Analysis of Water Security Using Causal Loop Diagram
Bastan, Mahdi
Impacts of Safety Performance and Culture on Work-Related Accidents: A System Dynamics Dynamics Model
Beer, Deon D
Skills development in South Africa through Idea2Product Lab layout for effective learning
Behboudi, Mohammad Hadi
Optimizing Durability of the High Performance Nano-Concrete Applying Taguchi Method and Desirability Function
BENABDERAZIK, Kenza
IOEM Capestone Project EMI Team
BENADADA, Youssef
A hybrid approach for a Strategic planning problem represented by a three-echelon logistics network
Benavides-Peña, Ilse-Valeria
Improving Distribution Efficiency to Increase Agility: An Application to a Mexican Company
Benavides-Peña, Ilse-Valeria
Improving On-Time Delivery Eliminating Routing Waste: A Case Study
Benavides-Peña, Valeria
Improving On-Time Delivery by Increasing Distribution Agility: A Case Study
Benazzouz, Touria
Using Ontology as a Decision Support System for Manage Risks in Medicines Supply Chain: Case of Public Hospitals in Morocco
Benchaou, Soukaina
A new statistical system for recognition of segmented numerals
BENDAOUDI, Seif Eddine
Behavioural modelling of Corundum under the effect of porosity rate
BENHIDA, Khalid
An integrated planning budgeting model for transportation in a supply chain: A case study for phosphate industry
Benhida, Khalid
Development of a methodology to assist manufacturing SMEs in the selection of appropriate Green Lean Six Sigma tools
Benmamoun, Zoubida
Inventory management optimization using lean six-sigma Case of Spare parts Moroccan company
Bennabbou, Loubna
Towards an Information Technology Governance framework selection: criteria determination
BENYOUNES, Khaled
DESIGN AND PERFORMANCE OF THE WATER-BASED DRILLING MUD IN THE SECOND PHASE, THE OIL FIELDS OF HASSI MESSAOUD.
Bernatchou, Maryam
Performance evaluation of a chemotherapy treatment unit through simulation
Berrado, Abdelaziz
A Transport Strategy Developing Process Based on Stakeholder Engagement
Bhandarkar, Bhaskar
Minimizing Lead Time of Junction Box (Die Cast Enclosure) Assembly Line using Industrial Engineering Techniques
Bilal, Babar
LEAN Six Sigma Application in Sugar Industry
Bon, Abdul Talib
Industrial Engineering Solution in the Industry: Artificial Neural Network Forecasting Approach
BOUABAZ, Mohamed
Building Information Modelling (BIM) for Productivity, in Rehabilitation and Repair of Buildings
Bouanane, Khaoula
Optimization of Vehicle Routing Problem in the Context of Reverse Logistics of Handling Containers in Closed Loop
Bouayad, Hakim
Towards an Information Technology Governance framework selection: criteria determination
Bouchra, ABOU ELANOUAR
Fault diagnosis of rotating machinery using vibration measurement: Application of the Wavelet Transform
Bouhamla, Khedidja
Influence of manufacturing process on wear resistance Of grinding balls
Boulkenafet, Nabil
Building Information Modelling (BIM) for Productivity, in Rehabilitation and Repair of Buildings
BOULOIZ, Hafida
Risk Assessment in LPG Loading Operations by Simulation
Bourebia, Mounira
Influence of manufacturing process on wear resistance Of grinding balls
BOUTI, MOHAMED YOUNES
Employees' Behavioral Safety Compliance Factors toward Occupational, Safety and Health Improvement in the Energy sector
Caballero-Morales, Santiago-Omar
Heuristic for the Capacitated p-Median Problem under a CVRP Approach
Cacchiani, Valentina
Relaxations and algorithms for the traveling salesman problem with time-dependent service times
CAMPOS-AVENDANO, GUSTAVO
Application of a neural network to classify the out-of-control signal that gives the T2 multivariate graph of Hotelling using data obtained in the industry
Cantor, Victor John
A Modified SBM-NDEA Approach Considering Non-homogeneity of Sub Processes
Carvalho, Ana Clara
How Business Startup Accelerators Envision their Future
Carvalho, André
Building an agile culture of excellence to address the unstable business environments of the XXI century
Chadha, Vimanyu
Experimental Analysis of Surface Roughness in CNC Taper Turning of Aluminum 6061 Using Taguchi Technique
charan, guru
Beyond Imagination
Charkaoui, Abdelkabir
Using Ontology as a Decision Support System for Manage Risks in Medicines Supply Chain: Case of Public Hospitals in Morocco
charupash, Rujee
Factors related to role model of financial planning for retirement of Sirindhron College of Public Health's government officers
Chatterjee, Debdeep
EVALUATING RISKS ASSOCIATED WITH AGILITY IN CORPORATE ENTERPRISES
Chavero, Mitzary Elizabeth
A Continuous Improvement Project to Increase Fulfillment Level in a Wire Company
Che Daud , Mohd Radzi
Examining the Impact of Lean Manufacturing on Soft TQM Practices and Sustainable Performance: Evidence from Malaysian Industries
Che Ku Yahaya, Cik Ku Haroswati
Operations and Supply Chain Mini Simulator Development as a Teaching Aid to Enhance Student's Learning Experience
Che Mustapha, Jawahir
Operations and Supply Chain Mini Simulator Development as a Teaching Aid to Enhance Student's Learning Experience
Chebila, Mourad
Allocation and optimization approach for safety barriers in hydrocarbons storage stations: Case of SBM station
Chen, Frank
Price Discrimination in a Regulated Healthcare Market: Role of Government Subsidy and Price Cap
CHERIFI, Ahmed
Knowledge management and eco-innovation: Issues and organizational challenges to small and medium enterprises
Chiarini, Andrea
Development of a methodology to assist manufacturing SMEs in the selection of appropriate Green Lean Six Sigma tools
CHIHEB, Raddouane
Literature Review and Classification of Performance Analysis Methods: Hospital Supply Chain
CHINGONO, TATENDA TALENT
Enterprise development in the waste management sector: a review
Chompu-inwai, Rungchat
Optimal Cost Driver Selection in Activity-Based Costing Using Shuffled Frog Leaping Algorithm
Chraibi, Lotfi
A New Performance Measurement Corporate Social Responsibility Model for Small and Medium-Sized Industrial Enterprises
Contreras Bolton, Carlos
Relaxations and algorithms for the traveling salesman problem with time-dependent service times
Cuervo Sanchez, Juan Sebastian
Stabilization of the Plan Percent Complete Indicator in Masonry by the Application of Lean Construction - Six Sigma Techniques
Cyrus, Kaveh M.
Huristicaly long-term money exchange rates forecasting for low technological in progress developing countries
Dagaonkar, Pankhuri
Evolution of Unitization in E-commerce Supply Chain
DAHBI, Samya
Integration of Health and Safety at Work and Environment perspectives in the Balanced Scorecard
Dammah, Hajar
Nonlinear Control Based on a Combination Between Sliding Mode and Backstepping of Grid Connected Photovoltaic System
Daneikina, Natalia
Analysis of the learning model 'School-University-Enterprise' in preparation of personnel pool for enterprises of Russian electrical energy industry
Darwish, Hasan
Expanding Industrial Thinking by Formalizing the Industrial Engineering Identity for the Knowledge Era
Darwish, Samy H.
Detection of Steel Surface Defect Based on Machine Learning Using Autoencoder Network
Dasgupta, Sudipto
Developing Seller Experience At Online Marketplaces Through Structured Data Driven Feedback Management Systems
de Castro Fettermann, Diego
The adoption of socio-technical and JIT practices and its relationship with the performance of quality and workers' health
de Freitas Ayres, Luiz
Continual improvement in an ISO 9001:2008 certified company: a case study of a leasing and service company
Dengiz, Berna
LOGNORMAL ORDINARY KRIGING METAMODEL
deqqaq, hajar
Sustainable Distribution Networks Adoption in Moroccan industry: barriers and instigators
Derakhshanalavijeh, Roya
Megaprojects and Uncertainty; Opportunities for the Future
Diouri, Jaouad
Numerical Modeling of a Parabolic Trough Solar Collector Under Climatic Conditions of Errachidia, Morocco.
Doulat-Abadi , Mehran
ASSESSING QUALITY PRACTICES AND PERFORMANCE RELATIONSHIP: A REVIEW FROM DIFFERENT INDUSTRIES
Douraid , Abdessamad
Risk Management in Procurement of Oil materials
Driss Bouami, Bouami
Innovation Function within the company: literature review and modelling attempt of related process
Dweiri, Fikri
Decision Support Tool for Project Time-Cost Trade-off
Dzulkalnine, Natasha
Comparative Study of Procurement System between Industrialised Building System (IBS) and Conventional Construction in Malaysia
ECH-CHARRAT, Mohammed Rida
Hydride algorithms for assignment problem of reusable containers in closed loop supply chain
Echchtabi, Abdelwahed
Using Ontology as a Decision Support System for Manage Risks in Medicines Supply Chain: Case of Public Hospitals in Morocco
Edikoju, Udaykiran
Cost optimization through bi-directional supply chain
El Abbadi , Laila
E-Kanban the new generation of traditional Kanban system, and the impact of its implementation in the enterprise
EL AMRANI, Mohammed
New exact method to solve multi-capacitated location problem using set partitioning formulation
EL AOUFIR, Houda
Proposition of conceptual model of Integration Management Systems based on five step of DMAIC approach
El Bouardi, Abdelmajid
Improving the passive building energy efficiency- Case study: Office building in Tetuan city in northern Morocco
El Boukili, Abderrazzak
Accurate modeling and simulation of the thermal effects on the mechanical properties of Silicon, Germanium, and Silicon-Germanium materials used in nanotransistors and solar cells
El fezazi, Said
Innovation Function within the company: literature review and modelling attempt of related process
El Had, Khalid
Risk Management in Procurement of Oil materials
EL HEIT, Kaddour
DESIGN AND PERFORMANCE OF THE WATER-BASED DRILLING MUD IN THE SECOND PHASE, THE OIL FIELDS OF HASSI MESSAOUD.
EL KAISSI, Anas
IOEM Capestone Project EMI Team
El Khoreiby, Naglaa
A Sustainable Environmental Optimizer for Urban Landscape Design (SEOUL)
EL MARIOULI, Oussama
Proposal for a multidimensional approach to the performance measurement of the sustainable procurement-supply function (with a case study)
EL Moussami, Haj
Improving efficiency of a production line by Using Overall Equipment Effectiveness:A case study
EL OTMANI, Fadwa
A Passivity-based Control and Simulation for double cascade DC/DC Converter with a fuel cell
EL YAMANI, Imane
IOEM Capestone Project EMI Team
El-Kilany, Khaled
Energy-Based Aggregate Production Planning For Porcelain Tableware Manufacturer in Egypt
El-Sherbeeny, Ahmed M.
Assessing Engineering Minorities in Saudi Arabian Higher Education: Status and Challenges
El-Tamimi, Abdulaziz
Predicting surface roughness and exit chipping size in BK7 glass during rotary ultrasonic machining by adaptive neuro-fuzzy inference system (ANFIS)
Elallali, Aicha
Controller Design and Average Performance Analysis of a single phase parallel active power filter
Elbaloula, Husham
Full Field Implementation of Cyclic Steam Stimulation to Enhanced Oil Recovery for a Sudanese Oil Field
ELBOK, Ghizlane
Towards an Effective Project Portfolio Selection Process
Elhammouchi, Chouaib
Evaluation of the supply chain in the Moroccan automotive industry
Elhemmali, Alaaeddin
PRODUCING WATER BY CONDENSATION OF HUMID AIR IN BURIED PIPE
Elkafazi, Ismail
Optimization of energy production
Elkihel, Bachir
Fault diagnosis of rotating machinery using vibration measurement: Application of the Wavelet Transform
Elmabrouk, Saber
An Overview of Power Plants CCS and CO2-EOR Projects
ELRHANIMI, SAMAH
In the framework of the Corporate Social Responsibility: Proposal of a methodology of selection of performance indicators
Elsaadany, Angie
Analysis of a Manual Mixed-Model Assembly Line in Food Processing Industry: A Case Study
Elwerfalli, Abdelnaser
Application of the Turnaround Maintenance (TAM) Model to Oil and Gas Plants in Case Study for Heat Exchangers
Elwerfalli, Abdulnaser
A Conceptual Model for a Hybrid Knowledge-Based System for Quality Management at Healthcare Environment
Erramdani, Mohammed
Getting Model of MVVM pattern from UML Models
Esnaf, Şakir
Revenue Management Model with Customer Behavior: An Application for Road Transportation Industry
Ezzat , Ahmad
Optimization of Recycling the Granulated Slag as Partial Substitute of Cement to Produce Sustainable Concretes
Failaka, Muhamad Fariz
The Effect of Tube Replacement on The Operation of Primary Reformer in Ammonia Plant
Faisal, Mohd Nishat
Mapping Associated Risks in Oil and Gas Supply Chains: Evidence from UAE
Felani, Muhamad Iqbal
Diagnosing Causes of Coal Power Plant Energy Losses Using Bayesian Belief Network
Fernandes, Anderson
Employee's clustering based on the Big Five Model in a fitness franchising
Fethallah, Widad
A New Performance Measurement Corporate Social Responsibility Model for Small and Medium-Sized Industrial Enterprises
Filali, Saida
Getting Model of MVVM pattern from UML Models
Firouzi Jahantigh, Farzad
Codification Domestic and International Tourism Development Strategies of Ocean Coast of Iran
Fors, M. Nashat
Detection of Steel Surface Defect Based on Machine Learning Using Autoencoder Network
Fries, Carlos Ernani
Employee's clustering based on the Big Five Model in a fitness franchising
GALLAB, Maryam
Risk Assessment in LPG Loading Operations by Simulation
Garbolino, Emmanuel
Risk Assessment in LPG Loading Operations by Simulation
GARZA-AMAYA, VALERIA
Improving Distribution Efficiency to Increase Agility: An Application to a Mexican Company
Garza-Amaya, Valeria
Improving On-Time Delivery by Increasing Distribution Agility: A Case Study
GARZA-AMAYA, VALERIA
Improving On-Time Delivery Eliminating Routing Waste: A Case Study
GARZA-MADERO, CECILIA
Improving Distribution Efficiency to Increase Agility: An Application to a Mexican Company
GARZA-MADERO, CECILIA
Improving On-Time Delivery by Increasing Distribution Agility: A Case Study
GENDRON, Bernard
A hybrid approach for a Strategic planning problem represented by a three-echelon logistics network
Ghanmi, Ahmed
A Stochastic AHP Method for Bid Evaluation Plans of Military Systems In-Service Support Contracts
Gharib, Jihane
Assessment of Investment Project Profitability In Uncertain Environment: A Real Options Approach
Giorgetti, Alessandro
Conceptual framework for user based RPM
Girgenti, Andrea
Conceptual framework for user based RPM
Gonçalves, Marisa Abreu
A Comparison Between Nordic and Mediterranean Start Up Ecosystems: Economic Sectors, Business and Pricing Models
Gonzalez Aleu, Fernando
A Continuous Improvement Project to Increase Fulfillment Level in a Wire Company
Goodarzi, Maryam
Key Success Factors of drug Supply Chain Performance
Grida, Mohamed
Repairable 3-Out-Of-4: Cold Standby System Availability
Grilo, Antonio
A Comparison Between Nordic and Mediterranean Start Up Ecosystems: Economic Sectors, Business and Pricing Models
GRINE, Fatima Zahraa
An overview on various criteria used to select an optimal location of a logistic hub
Gupta, Jiku Das
Industrial Engineering and Operations Management Functions in the Apparel Manufacturing Industry
Gupta, Ravina
Minimizing Lead Time of Junction Box (Die Cast Enclosure) Assembly Line using Industrial Engineering Techniques
Gupta, Sanchay
Experimental Analysis of Surface Roughness in CNC Taper Turning of Aluminum 6061 Using Taguchi Technique
Gutsa, Brighton
Design of a rice transplanter for Zimbabwean farmers
H. Al-Maamori , Mohammed
Effect of Novolac wt.% on Rheological Properties of NBR/CR Blends
Hachimi, Hanaa
Inventory management optimization using lean six-sigma Case of Spare parts Moroccan company
Haleem , Asif
Study the Factors That Influence Employees Performance in the Steel Factory, Saudi Arabia
HAMADA, YAHYA
A hybrid approach for a Strategic planning problem represented by a three-echelon logistics network
Hamdoun, Abdellatif
A Passivity-based Control and Simulation for double cascade DC/DC Converter with a fuel cell
Hameed, Rashid
Scope Creep is a Critical Risk Area of Contract Risk Management in Engineering-Procurement-Construction (EPC) Projects?
HAMIDI, SIHAM
A Framework for National Innovation Determinants
Hamouda, Abdel Magid
Usage of Non-Linear Regression for Modeling the Behavior of Motor Vehicle Crash Fatality (MVF) Rate
Hariandja, Evo Sampetua
New Product Development Strategy of Stem Cell-related Products in Indonesia Biopharmaceutical Industry
Hasan, Mohammad Babul
Determination of Optimal Smoothing Constants for Exponential Smoothing Method & Holt's Method
HASSAINI, Katia
Réesolution d'un problème de programmation quadratique à variables bornées avec une M-matrice
Hassan, Basel
Using Design of Experiment to Predict Concert Compressive Strength Using Fly Ash and GGBFS as Cement Alternative
Hassan, Mohd Fahrul
Effect of Feed Rate and Depth of Cut on Cutting Forces and Surface Roughness in End Milling of Mild Steel with NOVIANO Cutting Tool
Hassneiah , Rana
Analysis of a Manual Mixed-Model Assembly Line in Food Processing Industry: A Case Study
Hayajneh, Mohammed
Optimization of Recycling the Granulated Slag as Partial Substitute of Cement to Produce Sustainable Concretes
Hijry, Hassan
Study the Factors That Influence Employees Performance in the Steel Factory, Saudi Arabia
hmina, khadija
Clarification of a problem abstraction process for TRIZ technical contradiction model in preliminary design
HOCINE, ABDERREZZAK
The masking effect due to industrial noise and applying the method of the level of interference with speech
Hocini, Fadila
Enumeration of particular paths
Hoseini, Seyed-Ali
An Economical Approach for Using Solar Water Heaters in Mashhad, Iran
Hoser, Deniz
A Polynomial Time Tour Algorithm for Order Picking Operations in Warehouses and New Aisle Designs
Hossein Zadeh Shahri, Masoumeh
Effective Factors Of Customer Satisfaction In Medical Tourism Based On SERVQUAL Model And Ranking Them By Applying The TOPSIS Technique, Case study: Tehran Hotel hospital Gandhi
Houti, Mariam
E-Kanban the new generation of traditional Kanban system, and the impact of its implementation in the enterprise
I. Al-Mosawi, Ali
Effect of Novolac wt.% on Rheological Properties of NBR/CR Blends
IBN-HOMAID, Naief Turki
Assessment of Financial Condition: A Case Study of Saudi Construction Companies
Ibrahim, Ihfasuziella
A COMPARATIVE STUDY ON CRITERIA OF SHOPPING CENTRE CLASSIFICATION IN MALAYSIA
IBRAHIM, MOHD RASIDI
Effect of Feed Rate and Depth of Cut on Cutting Forces and Surface Roughness in End Milling of Mild Steel with NOVIANO Cutting Tool
Ibrahim, Nouran
Study of sustainability of a paper recycling supply chain based on profit optimization
IDJIS, Khelidja
Variance reduction of the mean number of customers in the orbit of M/M/1 retrial queues using sampling methods
Ihssane, CHTOUKI
Parallel active filter for harmonics reduction in a solar conversion chain connected to the electrical network with nonlinear loads
Ikheneche, Nacera
On adaptive method for solving a Convex Quadratic Programming
Islam, Md. Atikul
Aluminum Metal Casting with High Speed Die Casting Machine and It's Powder Coating Process: A Case Study
Islam, Md. Atikul
Industrial Engineering and Operations Management Functions in the Apparel Manufacturing Industry
Islam, Md. Sunny Ul
Aluminum Metal Casting with High Speed Die Casting Machine and It's Powder Coating Process: A Case Study
İŞLEYEN, Selçuk Kürşat
SOLUTION TO THE PROBLEM OF INTERVENTION TO REFUGEE BOATS IN SEAS THROUGH MIXED INTEGER MATHEMATICAL MODEL
Ismail, Kamariah
ASSESSING QUALITY PRACTICES AND PERFORMANCE RELATIONSHIP: A REVIEW FROM DIFFERENT INDUSTRIES
Ismail, Md Yusof
Examining the Impact of Lean Manufacturing on Soft TQM Practices and Sustainable Performance: Evidence from Malaysian Industries
jabbar, sanae
ANALYSIS OF MANAGEMENT METHODS OF HEALTH CARE PRODUCTION SYSTEMS: A PRACTICAL GUIDE FOR MANAGERS
Jaffar, Jasrina
Operations and Supply Chain Mini Simulator Development as a Teaching Aid to Enhance Student's Learning Experience
JAIDUMRONG, JATUPORN
Optimal tool allocation on tool magazines using a Short Indexing Algorithm - SIA
Jang, Joseph
Statistical JAVA Gaming Simulation
Jimerson, Brittney
An Ergonomic Assessment of Caregivers Preparing Patients for Patient Transfer Task
KAHSAY, GEBREMESKEL
Analysis and Optimization of MAG welding Parameters Using Genetic Algorithm
kahsay, gebremeskel
Optimization of Extrusion Process Parameters using Taguchi integrated GRA
Kanchan, Sarvartha
A Meta-Heuristic Clustering Model to Optimize City-Logistics Resource Requirements considering First Mile and Last Mile Value Stream Map
Karthik, Krishna
NFC Aided Sortation System for E-Commerce Warehouses
Kashalikar, Udayan
Returns Management and Value Recovery Through Systemized Orchestration and Inventory Tagging
Kasialvalad, Ehsan
Impacts of Safety Performance and Culture on Work-Related Accidents: A System Dynamics Dynamics Model
Kayacı Çodur, Merve
Rural Postman Problem Approach for Waste Collection Operations in the City of Erzurum in Turkey
Keathley-Herring, Heather
Bibliometric Analysis of Research in Continuous Improvement Projects in Hospitals
Kelkar, Girish Shankar
Challenges of executing projects in select African countries
Kerrouz, Siham
Evolution of the Von Mises Stress of a Cracked Plate
KHACHANI, Chaimaa
Etude de l'Impact Financier d'Optimisation des Coûts Logistiques : Cas des multinationaux : l'exemple de YAZAKI MOROCCO S.A - Tanger
KHAISSIDI, Chaimae
Literature review of the integrated approach Lean Green
Khaleel, Khaled
Using Design of Experiment to Predict Concert Compressive Strength Using Fly Ash and GGBFS as Cement Alternative
khalifa, Ramy
Belt fault detection using artificial intelligence
Khan, M. Khurshid
A Conceptual Model for a Hybrid Knowledge-Based System for Quality Management at Healthcare Environment
khandekar, yash
Clean and Green technology : Hybrid Solar Lighting
Kholief, Ehab A.
Detection of Steel Surface Defect Based on Machine Learning Using Autoencoder Network
kholief, ghada
Repairable 3-Out-Of-4: Cold Standby System Availability
Khorramshahgol, Reza
Utilizing AHP in Design Choices for Products Undergoing Regulatory Changes
Khoshnoud, Samira
A preemptive goal programming approach for developing a cost-time trading-off model based on tolerated cost
Khuan, Wai Bing
Comparative Study of Procurement System between Industrialised Building System (IBS) and Conventional Construction in Malaysia
Kissani, Ilham
Bone Phosphate Lime Sampling Method
Kobayashi, Miho
Location Routing Problem with Transportation Mode Options
Kravchenko, Nadezhda
Interactive methods of teaching Physics on MOODLE Platform in educational process
Krishna R. P. , Brijesh
PREPLANNED TRUCK OPTIMIZATION USING CARGOWIZ
Krishnakumar, U
QFD Approach to define CSR: Indian Perspective
Krothapalli, Poornima
Optimal Sortation Strategy for a distribution network in an E-commerce supply chain
Kucukvar, Murat
Global Carbon Accounting Tool (GCAT) for Manufacturing Supply Chains: The World Model
Kulkarni, Shailesh
On setting the delivery due date with production on a machine under outsourced maintenance
Lachkar, Ibtissam
A Passivity-based Control and Simulation for double cascade DC/DC Converter with a fuel cell
laghrabli, samia
Estimating Utility Functions through Experimental Designs
Lai, KK
Formulating and Implementing Supply Chain Strategy: Extension of Organization Strategy Framework
Lamrani Alaoui, Youssef
Assessing the Performance of Lending Process in Moroccan MFIs: AHP-Fuzzy Comprehensive Evaluation Approach
Laradi, Mohamed
Risk Management in Procurement of Oil materials
LASRI, Larbi
Clarification of a problem abstraction process for TRIZ technical contradiction model in preliminary design
latif, afif fiqry
Effect of Feed Rate and Depth of Cut on Cutting Forces and Surface Roughness in End Milling of Mild Steel with NOVIANO Cutting Tool
LATIFA, ALIMI
EFFECTS OF TOLUENE-METHANOL MIXTURE ON MECHANICAL AND STRUCTURAL PROPERTIES of HDPE pipe
Lau, Maggie
Predict 2017 NBA Team Winning Percent
Lebied, Meriem
Improving the passive building energy efficiency- Case study: Office building in Tetuan city in northern Morocco
Li, Zonghuan (Jason)
An analysis of Powerball and Condition Leading to January Largest Powerball in History
Lim, Katherine
Simulate Tesla Summon Auto-Pilot Parking
Liu, Timothy
Data Mining- Detect Cheating Pattern
Lo, Hui-Chiung
Optimal Pricing Strategy for Multi-generations Durable Products with a Trade-in Program
Lopez-Irarragorri, Fernando
A Fuzzy Programming multiobjective model for Urban Transport Planning
Lupi Vergara, Lizandra
The adoption of socio-technical and JIT practices and its relationship with the performance of quality and workers' health
Maake, Prudence
Factors responsible for engineering skills shortages in South African Construction industry
Maarof, Mohd Ghazali
What Drives A Successful Kaizen Implementation? An Insight from Malaysian Automotive Manufacturers
Madhav, Rushil
Managing Changeover Waste in Manufacturing Plants When Using Single Minute Exchange of Dies
Mahmoudabadi, Abbas
A preemptive goal programming approach for developing a cost-time trading-off model based on tolerated cost
Mahmud, Walid
An Overview of Power Plants CCS and CO2-EOR Projects
majdouline, Ilias
problem of maintenance strategy and production planning for a multiple-product manufacturing system
Majumder, Snigdha
Using Automation Technology and IOT Based Data Capturing to Ensure High Quality Last Mile Logistics
Malkan, Darpan
Evolution of Unitization in E-commerce Supply Chain
Manolkar, Radhika
Hydraulic Fodder Baler Machine
Marcotte, Suzanne
Optimization of Vehicle Routing Problem in the Context of Reverse Logistics of Handling Containers in Closed Loop
Mark Lee, Seongkwan
Traffic Sign Evaluation and Redesign of Typeface in Saudi Arabia
Marnewick, Annlize
Managing Changeover Waste in Manufacturing Plants When Using Single Minute Exchange of Dies
Marodin, Giuliano
Lean Supply Chain: empirical research on practices and performance
Marsaioli de Arruda, Juliana
Continual improvement in an ISO 9001:2008 certified company: a case study of a leasing and service company
Masebinu, Samson
A Review on Battery Technologies for Electrical Energy Storage
MASHWAMA, NOKULUNGA
An investigation of critical factors that causes the cost of poor quality in construction projects in Swaziland
Mbohwa, Charles
The nurse rerostering problem: An explorative study
Mebarek, Djebabra
Strategic Analysis of Environmental Management:
Melo, Manuela
Sensor Design and Layout for Airport Asphalt Pavement Instrumentation to Test for Delamination
MIFDHAL, LAHCEN
problem of maintenance strategy and production planning for a multiple-product manufacturing system
Mimouni, Faycal
Proposition of a methodology to model and analysis with the introduction of secondary market in the global supply chain
Miorando, Rogério
Lean Supply Chain: empirical research on practices and performance
Mirarchi, Alessio Pasquale
Remote Laser Welding on the hybrid materials
Mishra, Rajesh
Analysis of TPM Barriers using ISM-MICMAC Approach
Mohammadi, Nafiseh
Flight Arrival Simulation
Mohand Ouamer, Bibi
On adaptive method for solving a Convex Quadratic Programming
Mohand Said, CHERFAOUI
Impact of reforestation work on vegetation cover in semi-arid region: the case of EL Green Dam to Bayad (Naama Wilaya)
Mohd Yusof, Sha'ri
Design Concept of Day Minus 1 Production Model Using Systems Modeling Language: a Case Study of Hospital Beds Production
Mokhlis, Ahmed
Development of a methodology to assist manufacturing SMEs in the selection of appropriate Green Lean Six Sigma tools
Mokhtar, BOUNAZEF
Behavioural modelling of Corundum under the effect of porosity rate
Mokhtar, BOURDIM
Evolution of the Von Mises Stress of a Cracked Plate
Mokhtari, Majda
Synthesis and Structural Characterization of nanocomposite bioceramic powder based on hydroxyapatite
Mokoena, Thabiso
Perceptions on Continuous Improvement in Postal Services
MOOSA, Sharafali
On setting the delivery due date with production on a machine under outsourced maintenance
Mostafa, Elamrani
Fault diagnosis of rotating machinery using vibration measurement: Application of the Wavelet Transform
Mostafa, Noha
Solving the Heterogeneous Capacitated Vehicle Routing Problem using K-Means Clustering and Valid Inequalities
Mostafaeipour, Ali
A thorough evaluation of implementing geothermal energy for producing hydrogen in Iran using Data Envelopment Analysis(DEA)
MOUMEN, Mariyam
Proposition of conceptual model of Integration Management Systems based on five step of DMAIC approach
MOUMENI, CHAOUKI
Evaluation of failure probability of a oven by coupling MASD-MOSRA and Bayesian networks
Mousa, Ahmed
Using Design of Experiment to Predict Concert Compressive Strength Using Fly Ash and GGBFS as Cement Alternative
Mouss, Mohamed Djamel
Intellectual capital ans its measurement
Mugodo, Peterson. S
Design of a sawdust pelleting machine
Muhammad, JIhad
The effects of location, capacity, technology and integration on operational flexibility: A service industry perspective
Mukwakungu, Sambil Charles
Human Resources (HR) Utilization at a Short-Term Insurance Organisation in a Continuous Improvement (CI) Effort to Increase Customer Satisfaction
Munive Hernandez, Jose Eduardo
A Conceptual Model for a Hybrid Knowledge-Based System for Quality Management at Healthcare Environment
Muntasser , Mohamed
PRODUCING WATER IN A BURIED PIPE USING SOLAR AIR DRYER
Mushiri, Tawanda
Design of a rice transplanter for Zimbabwean farmers
Mustafa, Ibrahim
Implementation of Problem Based Learning in Chemical Thermodynamics Course at Yanbu Industrial College Saudi Arabia
Mustapha, Zakari
Examination of Standard Code for Health and Safety in Alternative Construction System
Muthukumaar, Vignaesh
Formulating and Implementing Supply Chain Strategy: Extension of Organization Strategy Framework
Mutingi, Michael
The nurse rerostering problem: An explorative study
MUTLU, NAZLI GÜLÜM
Relationships between occupational safety culture and the physical and psychological health of employees
Namany, Sarah
WACC Analysis and Applications
Nassimi, Abdelhakim
Sustainable supply chain management in Moroccan automotive sector: An empirical study
Ndebele, Robert
Public Private Partnerships (PPPs): An effective and legitimate finance model for TOD in South Africa?
Nedeltcheva, Galia Novakova
Analysis of the Correlation between the Stock Prices Trend and the Financial Distress Risk Assessment
Nguyen, Thi Hong Dang
Optimize Lean Supply Chain Design under Uncertainties by Hybrid Meta-Heuristics
Nishikawa, Takahiro
Location Routing Problem with Transportation Mode Options
Nkomo, Morena William
INFLUENCES OF MENTORING ON RETENTION AND SOCIALIZATION OF NEW EMPLOYEES IN THE CONSTRUCTION SECTOR THROUGH KNOWLEDGE TRANSFER
Nugraha, Ariyana Dwiputra
Diagnosing Causes of Coal Power Plant Energy Losses Using Bayesian Belief Network
Nwanekah, Godfrey
Skills development in South Africa through Idea2Product Lab layout for effective learning
Ogra, Aurobindo
Public Private Partnerships (PPPs): An effective and legitimate finance model for TOD in South Africa?
OGUNDARE, ADEBAYO
ERGONOMIC STUDY OF COMMUTTERS' BUS CABIN
Onat, Nuri Cihat
Global Carbon Accounting Tool (GCAT) for Manufacturing Supply Chains: The World Model
Otieno, Wilkistar
Remanufacturing Decision Support for Office Furniture
OUAZRAOUI, NOUARA
Allocation and optimization approach for safety barriers in hydrocarbons storage stations: Case of SBM station
OURBIH, Megdouda
Variance reduction of the mean number of customers in the orbit of M/M/1 retrial queues using sampling methods
OUTANA, Imane
Numerical Modeling of a Parabolic Trough Solar Collector Under Climatic Conditions of Errachidia, Morocco.
OUZAYD, Fatima
Literature Review and Classification of Performance Analysis Methods: Hospital Supply Chain
Pacifici, Beniamino
Conceptual framework for user based RPM
Pakzad, Fateme
Developing a quadratic programming model for time-cost trading off in construction projects under probabilistic constraint
Pal, Subrata
Applicability and Scope of the Lean Management Philosophy in an E-Commerce Fulfilment Center Environment
PARK, HYUNGJUNE
Heuristic Algorithms Development for Layout Planning of Unequal-Sized Facilities with Input/Output Points
Parretti, Chiara
Conceptual framework for user based RPM
Pasandideh, Seyed Hamid Reza
Modeling and solving a bi-objective single-period problem within incremental discount in framework of solving multi-objective problems approach
Peña Lozano, Jose Miguel
WASTE REDUCTION IN A TOAST PRODUCTION LINE USING SIX SIGMA METHODOLOGY
Pitale, Rohit
Evolution of Unitization in E-commerce Supply Chain
Popplewell, Keith
Effective Integration of Manufacturing Strategy
Postnikova, Ekaterina
Interactive methods of teaching Physics on MOODLE Platform in educational process
Pratomo, Luna Chairindy
New Product Development Strategy of Stem Cell-related Products in Indonesia Biopharmaceutical Industry
PRAVEEN, PRAVEEN
QUALITATIVE ASSESSMENT OF RESPONSE, REACTION AND CONVERSATION GENERATE THROUGH VIRAL CAMPAIGN ON TWITTER
Pretorius, Jan Harm Christiaan
Benchmarking for the Design of a Lessons Learned System in Project Quality Management
Rafsanjani, Amir Jahangard
Performance Evaluation and Comparing of Big Data Platforms on Implementing K-Nearest Neighbors (K-NN) Algorithm
Rahmoun, Mohamed Rahmoun
An optimized algorithm for 2D image comparing based on Hausdorff Distance
Raja, Sachin
Sortation in Ecommerce Logistics in India: Design Principles for Scalability & Flexibility
Rakshit, Krishanu
Assortment Planning of Vertically Differentiated Products for Heterogeneous Customers
Ramazankhani , Mohammad-Ebrahim
A thorough evaluation of implementing geothermal energy for producing hydrogen in Iran using Data Envelopment Analysis(DEA)
Ramly, Edly Ferdin
A REVIEW OF EXISTING OPERATIONAL RISK MANAGEMENT DECISION SUPPORT TOOL
Rangarajan, Ananth
Applicability and Scope of the Lean Management Philosophy in an E-Commerce Fulfilment Center Environment
Rani, Hafnidar A.
CONSTRUCTION OF RING ROADS AS INFRASTRUCTURE DEVELOPMENT SIMEULUE ACEH REGION AS A RESULT OF REGIONAL DISPARITY
Rashid, Abu Raihan Md. Harunur
Development of a framework for 5S implementation considering specific industry and country context
Raslan, Belal
Using Design of Experiment to Predict Concert Compressive Strength Using Fly Ash and GGBFS as Cement Alternative
Rebentisch, Eric
Building an agile culture of excellence to address the unstable business environments of the XXI century
REGHIOUI, Mohamed
Resolution of the vehicle routing problem with cross docking
Revino, Revino
Design Concept of Day Minus 1 Production Model Using Systems Modeling Language: a Case Study of Hospital Beds Production
Rezaei , Hossein
Using Factor Analysis to Identify Effective Factors to Implement Solar Dryers: A Case Study
Rim, Tony Suk-Chul
Strategic inventory positioning for MTO production with stochastic processing times
Rime, Ettabaa
Innovation Function within the company: literature review and modelling attempt of related process
Romedan, Amir
Using Design of Experiment to Predict Concert Compressive Strength Using Fly Ash and GGBFS as Cement Alternative
Romouzi kouchebagh, Parisa
Effective Factors Of Customer Satisfaction In Medical Tourism Based On SERVQUAL Model And Ranking Them By Applying The TOPSIS Technique, Case study: Tehran Hotel hospital Gandhi
SAAD, LISSANE ELHAQ
Nonlinear Control Based on a Combination Between Sliding Mode and Backstepping of Grid Connected Photovoltaic System
Saadia, Saadi
Strategic Analysis of Environmental Management:
Sabiri, Chayma
Using Microsoft Project in highways project planning
Safian, Edie Ezwan Mohd
A COMPARATIVE STUDY ON CRITERIA OF SHOPPING CENTRE CLASSIFICATION IN MALAYSIA
Sahay, Mridula
PREPLANNED TRUCK OPTIMIZATION USING CARGOWIZ
Saidina Amin, Nor Aishah
Catalytic performance and optimization of hydrodesulfurization and naphtha reforming processes for clean fuel production.
Sajjad, Muhammad Hamad
Accidental poisoning prevention: an anthropometric study for Saudi Arabian children
Sakurada, Takaharu
Location Routing Problem with Transportation Mode Options
Salaheldin, Mohamed
Energy Efficiency Evaluation in Petrochemicals Industry
Salazar Echeagaray, Julieta Elizabeth
ANALYSIS OF THE ORGANIZATIONAL ECO-SYSTEMIC CHANGE IN A COOPERATIVE SOCIETY OF FISHING PRODUCTION
Salazar Echeagaray, Teresa Irina
ANALYSIS OF THE ORGANIZATIONAL ECO-SYSTEMIC CHANGE IN A COOPERATIVE SOCIETY OF FISHING PRODUCTION
Saleh, Seyyede Mahsa
Risk Evaluation on Construction Projects Using Fuzzy Logic and Binomial Probit Regression
SALLAOU, Mohammed
Clarification of a problem abstraction process for TRIZ technical contradiction model in preliminary design
Samira, Brahmi
Intellectual capital ans its measurement
Sampaio, Paulo
Building an agile culture of excellence to address the unstable business environments of the XXI century
Sampayo Oliveros, Ernesto Fabian
Stabilization of the Plan Percent Complete Indicator in Masonry by the Application of Lean Construction - Six Sigma Techniques
Santos, Yaneth Alejandra
A Continuous Improvement Project to Increase Fulfillment Level in a Wire Company
Sardana, Vishal
Experimental Analysis of Surface Roughness in CNC Taper Turning of Aluminum 6061 Using Taguchi Technique
Sarikhani , Saeede
Location planning of bioethanol plants from agricultural crop residues for fuel cells using DEA
Savsar, Mehmet
Analysis of a Manual Mixed-Model Assembly Line in Food Processing Industry: A Case Study
Shabani, Mohammadmehdi
Key Success Factors of drug Supply Chain Performance
Shafiee, Mahmood
Preventive maintenance and failure analysis of safety-critical assets in railway rolling stock
Shahul Hameed, Raja Abdul Razack
On setting the delivery due date with production on a machine under outsourced maintenance
Shamsuzzoha, AHM
Application of Product Modularity in Industry: a Case Study
Shankar Ravichandran, Siddharth
NFC Aided Sortation System for E-Commerce Warehouses
Sharma, R. Anjaneya
Relating strategy of the organizations to its pursued manufacturing flexibility strategy
Sharma, R.R.K.
Formulating and Implementing Supply Chain Strategy: Extension of Organization Strategy Framework
Sheikhi, Mahdie
Key Success Factors of drug Supply Chain Performance
Shibani, Abdussalam
Risk Management in Procurement of Oil materials
Shirvani, Ensiye
Huristicaly long-term money exchange rates forecasting for low technological in progress developing countries
Shringi, Rohitashw
Review of benchmarking for Auto Cluster located at NCR, India
Shrivastava, Suryansh
Design of Seller Implant Operations in an E-commerce Marketplace
Sick, Friedrich
Improving the passive building energy efficiency- Case study: Office building in Tetuan city in northern Morocco
SINGARI, RANGANATH M.
Experimental Analysis of Surface Roughness in CNC Taper Turning of Aluminum 6061 Using Taguchi Technique
Singh, AMARJIT
Sensor Design and Layout for Airport Asphalt Pavement Instrumentation to Test for Delamination
Singh, Charumani
Evolution of Unitization in E-commerce Supply Chain
Singh, Dhan
Formulating and Implementing Supply Chain Strategy: Extension of Organization Strategy Framework
Singh, Manpreet
Relating strategy of the organizations to its pursued manufacturing flexibility strategy
SOFIENE, DELLAGI
problem of maintenance strategy and production planning for a multiple-product manufacturing system
Song, Jie
Price Discrimination in a Regulated Healthcare Market: Role of Government Subsidy and Price Cap
Sorooshian, Shahryar
What Drives A Successful Kaizen Implementation? An Insight from Malaysian Automotive Manufacturers
SOUISSI, Nissrine
ANALYSIS OF MANAGEMENT METHODS OF HEALTH CARE PRODUCTION SYSTEMS: A PRACTICAL GUIDE FOR MANAGERS
Srivastava, Swadesh
Challenges and Opportunities in Computing Logistics Cost in E-commerce Supply Chain
Sudiro, Susanto
Design Concept of Day Minus 1 Production Model Using Systems Modeling Language: a Case Study of Hospital Beds Production
T, Deepak
Beyond Imagination
Tadesse Fellek, Getu
Optimization of Extrusion Process Parameters using Taguchi integrated GRA
TAGHZAOUI, Chaimaa
Adaptive Backstepping Controller of a single-phase Multicellular inverter connected photovoltaic systems
Tahri , Houda
The new Project Management Maturity Mixed Model (P4M) and the OPM3: Case of a PMO implementation
TAJUL ARIFIN, ABDUL MUBARAK
Effect of Feed Rate and Depth of Cut on Cutting Forces and Surface Roughness in End Milling of Mild Steel with NOVIANO Cutting Tool
Talip, Bazilah A.
Operations and Supply Chain Mini Simulator Development as a Teaching Aid to Enhance Student's Learning Experience
TAMIR, Manal
Literature Review and Classification of Performance Analysis Methods: Hospital Supply Chain
Tarakci, Hakan
On setting the delivery due date with production on a machine under outsourced maintenance
Taşkın, Arslan
Revenue Management Model with Customer Behavior: An Application for Road Transportation Industry
Taskin, Muhammet Ali
Global Carbon Accounting Tool (GCAT) for Manufacturing Supply Chains: The World Model
Thaba, Sebonkile
Current status of cycling lanes at University of Johannesburg
Thaiupathump, Trasapong
Optimal Cost Driver Selection in Activity-Based Costing Using Shuffled Frog Leaping Algorithm
Thwala, Wellington
BRIDGING THE GAPS OF CONSTRUCTION MARKETING FRAMEWORKS FOR CONSTRUCTION BUSINESS ENTERPRISES
TIAMAZ, Younes
Extended Classification of waste in the hospital system
TIJANI, Ibrahim Ajani
Assessment of Financial Condition: A Case Study of Saudi Construction Companies
Tkiouat, Mohamed
Risk Assessment in LPG Loading Operations by Simulation
TOBITA, RUMI
Developing an effective ESP curriculum integrating analysis with NIRS for engineering students
Tortorella, Guilherme
Employee's clustering based on the Big Five Model in a fitness franchising
Toth, Paolo
Relaxations and algorithms for the traveling salesman problem with time-dependent service times
touhami, lalla samira
Contribution to the performance evaluation of maintenance function
Touriki, Fatima Ezzahra
Lean deployment in SMEs, performance improvement and success factors: a case study
Tripathi, Anupam
Bill of Material Optimization: Case of a Packaging Company
TRIPATHI, SHASHANK MANI
Superiority of Sanskrit Language in Tele Communication & Computing
Van Tonder, Malan
Skills development in South Africa through Idea2Product Lab layout for effective learning
Vargas-hernández, José G
ANALYSIS OF THE ORGANIZATIONAL ECO-SYSTEMIC CHANGE IN A COOPERATIVE SOCIETY OF FISHING PRODUCTION
Varshney, Rajat
Forward Placement of Inventory to Strategically Curb Delivery Lead Time - Decision Framework and Design Methodology
Vartak, Nikhil
RFID In Supply Chain Management
Vasnier, Jean-Marc
Effective Integration of Manufacturing Strategy
Verduzco, Maria Teresa
A Continuous Improvement Project to Increase Fulfillment Level in a Wire Company
VILLARREAL, Ana-Sofia
Increasing On-Shelf Availability of a Mexican Convenience Store Network
VILLARREAL, BERNARDO
Improving Distribution Efficiency to Increase Agility: An Application to a Mexican Company
Villarreal, Bernardo
Improving On-Time Delivery by Increasing Distribution Agility: A Case Study
VILLARREAL, BERNARDO
Improving On-Time Delivery Eliminating Routing Waste: A Case Study
Wong, Kuan Yew
ASSESSING QUALITY PRACTICES AND PERFORMANCE RELATIONSHIP: A REVIEW FROM DIFFERENT INDUSTRIES
Wulff, Alfred
Evaluation of cloud platforms for big data analysis
Wunck, Christoph
Evaluation of cloud platforms for big data analysis
Yahya, Mohd Shahir
A REVIEW OF EXISTING OPERATIONAL RISK MANAGEMENT DECISION SUPPORT TOOL
YAMINA, FEDALI
A Performance evaluation of the human barriers security - application of omega 20 methodPaper
Yan, Houmin
Price Discrimination in a Regulated Healthcare Market: Role of Government Subsidy and Price Cap
Yankah, Jonas
BRIDGING THE GAPS OF CONSTRUCTION MARKETING FRAMEWORKS FOR CONSTRUCTION BUSINESS ENTERPRISES
Youssar, Sophia
Managing Product Life Cycle for Effective Supply Chain Strategies - Case of Pharmaceutical Industry in Morocco
Yusof, Azizah
ASSESSING QUALITY PRACTICES AND PERFORMANCE RELATIONSHIP: A REVIEW FROM DIFFERENT INDUSTRIES
Zaid, Abdelnaser
Repairable 3-Out-Of-4: Cold Standby System Availability
Zammar, Chad
Structured Assessment of Student Outcomes "a" and "e" in Mathematics For Engineering Students
Zandie, Mostafa
Optimizing Durability of the High Performance Nano-Concrete Applying Taguchi Method and Desirability Function
Zarezade, Mojgan
Using Factor Analysis to Identify Effective Factors to Implement Solar Dryers: A Case Study
Zawiah Md Dawal, Siti
Wudu' (Ablution) Workstation Design Analysis for Wheelchair User in Malaysia
Zermane, Hanane
New fuzzy-Based Process Control System for a Bag-filter in a Cement Manufacturing Plant
Zied, Hajej
problem of maintenance strategy and production planning for a multiple-product manufacturing system
Zouambi, Leila
Three-dimensional analysis of the distribution of defects in the bone cement linking the cup to the bone
Zulkifli, Norzima
Systematic Planning Layout and Line Balancing for Improvement in an Armoured Vehicle Manufacturing Plant