Proceedings
4th North American IEOM Conference – Toronto, Canada 2019
ISSN: 2169-8767 ISBN: 978-1-5323-5950-7
ID 001 Vermicomposting of Commercial Bio waste as a Solution to Waste Management in a Bio Economy
M. Manyuchi, C. Mbohwa, E. Muzenda, BioEnergy and Environmental Technology Centre, University of Johannesburg, South Africa
T. N. Mutusva, Department of Mathematical Sciences, Harare Institute of Technology, Zimbabwe
ID 002 Assessing the Potential to Produce Shoe wax using Agricultural Waste Bio char as an Additive
M. Manyuchi, C. Mbohwa, E. Muzenda, BioEnergy and Environmental Technology Centre, University of Johannesburg, South Africa
Hondo, Department of Chemical and Process Systems Engineering, Harare Institute of Technology, Zimbabwe
ID 003 Use of Watermelon Seeds in Water Treatment
M. Manyuchi, C. Mbohwa, E. Muzenda, University of Johannesburg, South Africa
Chikomo, Department of Chemical and Process Systems Engineering, Harare Institute of Technology, Zimbabwe
ID 007 Model-Based Engineering of a Process Wash Plant using SysML: Case study of beneficiation processes in a phosphate industry
Mariem Ait Bakader, Mohammed VI Polytechnic University, BENGUERIR, MOROCCO
Laurent Deshayes, Mohammed VI Polytechnic University, BENGUERIR, MOROCCO
Mohammed El Asri, Sidi Mohamed Ben Abdellah University, FES, MOROCCO
ID 010 Real Time Car Engine Condition Monitoring By Using Instantaneous Angular Speed Analysis (IAS)
Dr. Abdullrhman Sait, Mechanical Engineering Technology Department, Yanbu Industrial College, Yanbu, Kingdom of Saudi Arabia
Jamal Alfifi, Mechanical Engineering Technology Department, Yanbu Industrial College, Yanbu, Kingdom of Saudi Arabia
ID 014 Modeling of Enablers for Implementing ICT Enabled Wireless Control in Industry: an Integrated ISM and Fuzzy MICMAC Approach
Dr. Jayalakshmi.B, Instrumentation and Control Engineering Department, NSS College of Engineering, Palakkad, Kerala, India.
Haritha .H, Programmer Analyst, Cognizant Technology Solutions, Kochi, INDIA
Abijith Maniyeri, MENS, University of Southern Queensland, Toowoomba, AUSTRALIA
ID 015 Real Time Car Engine Condition Monitoring by Using Instantaneous Angular Speed Analysis (IAS)
Dr. Abdullrhman Sait, Mechanical Engineering Technology, Department Yanbu Industrial College Yanbu, Kingdom of Saudi Arabia
Jamal Alfifi, Mechanical Engineering Technology, Department Yanbu Industrial College Yanbu, Kingdom of Saudi Arabia
ID 016 Quality Management in Construction Projects
Richard Hannis Ansah, Department of Civil and Environmental Engineering, Hong Kong University of Science and Technology
Xueqing Zhang, Department of Civil and Environmental Engineering, Hong Kong University of Science and Technology
ID 018 Enhancement of Gaming Experience and Performance through an Ergonomically Designed Console Chair
Alma Maria Jennifer Gutierrez, Industrial Engineering, De La Salle University, Manila, Philippines
Lorenzo Cadiz, Industrial Engineering, De La Salle University, Manila, Philippines
Nathaniel Filoteo, Industrial Engineering, De La Salle University, Manila, Philippines
Ivan Juan, Industrial Engineering, De La Salle University, Manila, Philippines
Bryan Leopando, Industrial Engineering, De La Salle University, Manila, Philippines
ID 019 Design and developed of a smart elevator
Javier Cruz-Salgado, Research and Technology Development, Universidad Politécnica del Bicentenario, MEX
ID 020 Supply Chain of Energy Resources and Its Alternatives Due to the Arab Spring: The Case of Egyptian Natural Gas Flow to Jordan
Moh’d Anwer AL-Shboul, Business Administration Department, Princess Sumaya University for Technology (PSUT), Amman, Jordan
ID 021 The Impact of effective work design and ergonomics on employee’s productivity in higher education institutions in Pretoria East, Gauteng
Mrs Thobile Yvonne Bhila, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa
Dr E I Edoun, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa
Professor C Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa
ID 022 The Impact of greening practices and employee productivity in the restaurant business in Johannesburg North, South Africa
Mrs Thobile Yvonne Bhila, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa
Dr E I Edoun, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa
Professor C Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa
ID 023 Automatic Seed Sowing Machine
Dr. Khalid Abdullitife Ababtain, Mechanical Engineering Department, Yanbu, Saudi Arabia
Eng. Muhammed Ajmal, Mechanical Engineering Department, Yanbu, Saudi Arabia
ID 024 Techno-Economic Evaluation of Hybrid Power System in Rural Area of Sarawak, Malaysia
Chan Chun Yong, Universiti Teknologi Malaysia, Malaysia
Md. Mizanur Rahman, Universiti Teknologi Malaysia, Malaysia
Hasan Mohd Faizal, Universiti Teknologi Malaysia, Malaysia
Aminuddin Saat, Universiti Teknologi Malaysia, Malaysia
Mazlan Abdul Wahid, Universiti Teknologi Malaysia, Malaysia
ID 036 What Does Corporate Social Responsibility Encompass? A Literature Synthesis
Thatshayini, P., Treats Holdings Ltd., Acton, London
Damitha Rajini, Fathima Sabrina Nazeer, Department of Building Economics, University of Moratuwa, Sri Lanka
ID 037 Implementation of Augmented Reality in the Context of Industry 4.0: A Comprehensive Review
Madiha Rafaqat, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore
Kashif Ishfaq, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore
Naveed Ahmed, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore
ID 039 Application of BPMN-based workflow tools for Six Sigma process maps
Alfred Wulff, Department of Management, Information, Technology, Jade University of Applied Sciences, Wilhelmshaven, Germany
Saso Krstovski, Lawrence Technological University, 21000 West Ten Mile Road, Southfield, MI
ID 040 Design and Simulation of Maize Sheller for Small Scale Farmers
Ignatio Madanhire, Department of Mechanical Engineering, University of Zimbabwe, Harare, Zimbabwe
Simon Chinguwa, Department of Mechanical Engineering, University of Zimbabwe, Harare, Zimbabwe
Elton Ntini, Department of Mechanical Engineering, University of Zimbabwe, Harare, Zimbabwe
Charles Mbohwa, Department of Quality Management and Operations Management, University of Johannesburg, South Africa.
ID 041 Use of Biogas as Alternative Fuel for Tobacco Curing: Case for Zimbabwe
Ignatio Madanhire, Department of Mechanical Engineering, University of Zimbabwe, Zimbabwe
Simon Chinguwa, Department of Mechanical Engineering, University of Zimbabwe, Zimbabwe
Tendai Sakala, Department of Mechanical Engineering, University of Zimbabwe, Zimbabwe
Charles Mbohwa, Department of Quality Management and Operations Management, University of Johannesburg, South Africa
ID 042 Productive Maintenance ‘s Autonomous Maintenance in Achieving Effectiveness: Case Study
Ignatio Madanhire, Department of Mechanical Engineering, University of Zimbabwe, Mount Pleasant, Harare, Zimbabwe
Kumbi Mugwindiri, Department of Mechanical Engineering, University of Zimbabwe, Mount Pleasant, Harare, Zimbabwe
Tawanda Mutenhabundo, Department of Mechanical Engineering, University of Zimbabwe, Mount Pleasant, Harare, Zimbabwe
Charles Mbohwa, Department of Quality Management and Operations Management, University of Johannesburg, South Africa
ID 044 Optimal Preventive Maintenance Strategy Using Reinforcement Learning
Mina Mikhail, Department of Mathematics and Industrial Engineering, Polytechnique Montréal, Canada
Soumaya Yacout, Department of Mathematics and Industrial Engineering, Polytechnique Montréal, Canada
Mohamed-Salah Ouali, Department of Mathematics and Industrial Engineering, Polytechnique Montréal, Canada
ID 045 Architectural Model of Implementation of Bulding Information Modeling – BIM in the Colombian Construction Industry
Camilo Andrés Vaca Pinilla, Diseñadores de Ambientes de Tecnología DATEC, Universidad Nacional de Colombia sede Bogotá, Colombia
Lina Nataly Alvarado Riaño, Diseñadores de Ambientes de Tecnología DATEC, Universidad Nacional de Colombia sede Bogotá, Colombia
ID 046 Implementation of Association Rule-Market Basket Analysis in Determining Product Bundling Strategy: Case Study of Retail Businesses in Indonesia
Zakka Ugih Rizqi, Department of Industrial Engineering, Islamic University of Indonesia, Yogyakarta, Indonesia
ID 048 Longitudinal Effects of Team-Based Training on Students’ Peer Rating Quality
Siqing Wei, Department of Engineering Education, Purdue University West Lafayette, Indiana, USA
Daniel M. Ferguson, Department of Engineering Education, Purdue University West Lafayette, Indiana, USA
Matthew W. Ohland, Department of Engineering Education, Purdue University West Lafayette, Indiana, USA
Behzad Beigpourian, Department of Engineering Education, Purdue University West Lafayette, Indiana, USA
Chuhan Zhou, Department of Engineering Education, Purdue University West Lafayette, Indiana, USA
ID 049 Assessing Foreign Engineering Graduate Students’ Understanding of Sustainable Development – A Survey
Fouzia Baki, Mechanical, Automotive and Material Engineering (MAME), University of Windsor, Windsor, Canada
ID 051 Road Safety Modeling in Kuwait
Sharaf AlKheder, Civil Engineering Department, College of Engineering and Petroleum, Kuwait University, Safat, Kuwait.
Fahad AlRukaibi, Civil Engineering Department, College of Engineering and Petroleum, Kuwait University, Safat, Kuwait.
Ahmad Aiash, Civil Engineering Department, College of Engineering and Petroleum, Kuwait University, Safat, Kuwait.
ID 052 Delegation versus Control under Competition and Bargaining Power Distribution in Supply Chain Procurement
Parisa Rahimi, Industrial Engineering Department, Iran University of Science and Technology, Tehran, Iran
Rassoul Noorossana, Industrial Engineering Department, Iran University of Science and Technology, Tehran, Iran
Ehsan Bolandifar, Business School, The Chinese University of Hong Kong, Hong Kong
ID 053 A Discrete Event Simulation logic for Semiconductor Production Planning and Control within Industry 4.0 Paradigm
Ahmed H. Sakr, Mathematics and Industrial Engineering Department École Polytechnique de Montréal Montréal, Canada
Soumaya Yacout, Mathematics and Industrial Engineering Department École Polytechnique de Montréal Montréal, Canada
Samuel Bassetto, Mathematics and Industrial Engineering Department École Polytechnique de Montréal Montréal, Canada
ID 056 Merging Logical Analysis of Data Models
Osama Elfar, École Polytechnique de Montréal, Canada
ID 057 Automatic welding process: a study case of Soldering Machine
Sandro Breval Santiago, Department of Administration and Management, Federal University of Amazonas Manaus, Amazonas, Brazil
Eduardo Luiz de Oliveira Almeida, Institute Calcomp of Techonology ICCT, Electrical Departament
Jonathan Oliveira Dias, Institute Calcomp of Techonology ICCT, Mechanical Departament
ID 058 Design of New Plant Layout Using Lean Tools by Eliminating Wastes in Material Flow Process
Sriram Srinivasan, Department of Mechanical Engineering, University of Windsor, Windsor, Canada
Harita Zikre, Department of Mechanical Engineering, University of Windsor, Windsor, Canada
ID 059 Design of an Assessment Industry 4.0 Maturity Model: an application to manufacturing company
Americo Azevedo, Faculty of Engineering, University of Porto – INESC TEC – CESE, Porto, Portugal
Sandro Breval Santiago, Faculty of Social Studies, Federal University of Amazonas, Amazonas, Brazil
ID 060 Vehicle routing problem: case study in a retail automotive parts company
Leonardo G. Hernández-Landa, Industrial Engineering and Management Departament, Universidad Autónoma de Nuevo Leó, México
Argelia Vargas Moreno, Industrial Engineering and Management Departament, Universidad Autónoma de Nuevo Leó, México
Patricia Puente, Industrial Engineering and Management Departament, Universidad Autónoma de Nuevo Leó, México
ID 061 Industrial Value Chain Research and Applications for Industry 4.0
Dr. Soumaya Yacout, Department of Mathematics and Industrial Engineering, Polytechnique Montreal, Montreal, Quebec, Canada
ID 062 Natural Language Processing System for Self-Reflection and Peer-Evaluation
Rui Wang, School of Electrical and Computer Engineering, Purdue University, IN, USA
Siqing Wei, School of Electrical and Computer Engineering, Purdue University, IN, USA
Matthew W. Ohland, School of Electrical and Computer Engineering, Purdue University, IN, USA
Daniel M. Ferguson, School of Electrical and Computer Engineering, Purdue University, IN, USA
ID 072 Overall equipment effectiveness optimisation for a reserves constrained underground coal mine in South Africa
Moeketsi Maimela, Post Graduate School of Engineering Management, University of Johannesburg, South Africa
Telukdarie Arnesh, Post Graduate School of Engineering Management, University of Johannesburg, South Africa
ID 073 Developing a framework for evaluation of a digital maintenance management system
Maleho M, Post Graduate School of Engineering Management, University of Johannesburg, South Africa
Telukdarie Arnesh, Post Graduate School of Engineering Management, University of Johannesburg, South Africa
ID 074 Sustainability of lean manufacturing principles in a production system
Qawekazi Sinxoto, Post Graduate School of Engineering Management, University of Johannesburg, South Africa
Telukdarie Arnesh, Post Graduate School of Engineering Management, University of Johannesburg, South Africa
ID 075 Maintenance strategy optimisation for load haul dumpers used in the South African underground hard rock mine
Mpho Manenzhe, Post Graduate School of Engineering Management, University of Johannesburg, South Africa
Telukdarie Arnesh, Post Graduate School of Engineering Management, University of Johannesburg, South Africa
Medoh Chuks, Post Graduate School of Engineering Management, University of Johannesburg, South Africa
ID 076 Implications of Industry 4.0 in Nigeria electoral system
Arnesh Telukdarie, University of Johannesburg, South Africa
ID 077 Exploring Industry 4.0 technologies as drivers of Lean and Agile Supply Chain Strategies
Ibrahim Raji, LIUC – Università Carlo Cattaneo, Italy
Tommaso Rossi, LIUC – Università Carlo Cattaneo, Italy
ID 078 An evaluation of the fourth industrial revolution adoption in manufacturing industries: An African context
Arnesh Telukdarie, University of Johannesburg, South Africa
ID 080 Impact of Big data analytics on Innovation and Learning Performance
Surajit Bag, Faculty of Engineering and Built Environment, University of Johannesburg, South Africa
Arnesh Telukdarie, Faculty of Engineering and Built Environment, University of Johannesburg, South Africa
ID 081 Barriers to BDPA applications in Sustainable HSC Practices
Surajit Bag, Faculty of Engineering and Built Environment, University of Johannesburg, South Africa
Arnesh Telukdarie, Faculty of Engineering and Built Environment, University of Johannesburg, South Africa
ID 082 Allocation of Natural Gas to Consumption Sectors through Differential Price Paths
Ali Elkamel, Khalifa University of Science and Technology, United Arab Emirates
Farzaneh Daneshzand, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Michael Fowler, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Mohammad Reza Amin-Naseri, Industrial and Systems Engineering Faculty, Tarbiat Modares University, Tehran, Iran
ID 083 Big Data and Machine Learning Based Approach to Gas Processing: A Case of Condensate Stabilization
Muhammad Rizwan, Department of Chemical Engineering, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates
Mohammed Alkatheri, Department of Chemical Engineering, Khalifa University of Science and Technology, Abu Dhabi, UAE
Falah Alhameli, Department of Chemical Engineering, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates
Ali Elkamel, Department of Chemical Engineering, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates
Ali Almansoori, Department of Chemical Engineering, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates
ID 090 Data-driven Power generation Design and Operation under Demand Uncertainty
Ali Elkamel, Khalifa University of Science and Technology, United Arab Emirates
ID 099 A Stochastic Optimization Approach for Locating Humanitarian Disaster Relief Centers
Parmis Emadi, Department of Industrial Engineering, University of Windsor, Windsor, ON
Zbigniew J. Pasek, Department of Industrial Engineering, University of Windsor, Windsor, ON
ID 100 Aircraft Engine Remaining Useful Life Prediction Framework for Industry 4.0
Hussein A. Taha, Department of Mathematics and Industrial Engineering, Polytechnique Montréal, Canada
Ahmed H. Sakr, Department of Mathematics and Industrial Engineering, Polytechnique Montréal, Canada
Soumaya Yacout, Department of Mathematics and Industrial Engineering, Polytechnique Montréal, Canada
ID 101 Lean Manufacturing Maturity Model for automotive cluster
Hector David Colín-Lozano, Engineering Management Program, University of Monterrey, Nuevo León, México
Sonia Guerra-Loji, Engineering Management Program, University of Monterrey, Nuevo León, México
Martha Arely Vargas-Alvarado, Engineering Management Program, University of Monterrey, Nuevo León, México
Luz María Valdez-de la Rosa, Engineering Management Program, University of Monterrey, Nuevo León, México
Jesús Vázquez-Hernández, Engineering Management Program, University of Monterrey, Nuevo León, México
ID 102 Cluster Factors for Productivity Improvement: A Case Study for a Home Appliance Cluster in Mexico
Karol Villarreal, Engineering Management Department, Universidad de Monterrey, Nuevo Leon, Mexico
Karla Guerra, Engineering Management Department, Universidad de Monterrey, Nuevo Leon, Mexico
Ruben Molina, Engineering Management Department, Universidad de Monterrey, Nuevo Leon, Mexico
Luz Maria Valdez de la Rosa, Engineering Management Department, Universidad de Monterrey, Nuevo Leon, Mexico
ID 104 Improvement of the RNP in the Application of the FMEA in Automotive Processes
Leonardo Gabriel Hernández-Landa, Industrial Engineering and Management Area, Facultad de Ciencias Químicas, Universidad Autónoma de Nuevo León, México
Azucena M. García-León, Industrial Engineering and Management Area, Facultad de Ciencias Químicas, Universidad Autónoma de Nuevo León, México
Rosa E. Mata-Martinez, Industrial Engineering and Management Area, Facultad de Ciencias Químicas, Universidad Autónoma de Nuevo León, México
ID 105 The Importance of Quality Management System and Leadership in the South African Restaurant, Fast Food and Catering Sector – Case of the Gauteng Region
S.C. Mukwakungu, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
A.K. Lumbwe, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
D. Niati, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
C. Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
ID 117 Factors That Contribute Towards Cost Overruns In An African Mega-Project
O.J Malebye, Department of Post Graduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
A. Telukdarie, Department of Post Graduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 118 A Variable Neighbourhood Search Algorithm for Scheduling of the Multi-Objective Flexible Manufacturing Systems
Seyed Sina Miri Nargesi, Department of Industrial Engineering, Faculty of Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
Hamidreza Mozaffari Gilani, Department of Civil Engineering, Semnan branch, Islamic Azad University, Semnan, Iran
Seyyed Hassan Baghaipour, Department of Marketing, Manchester Business School, Manchester, UK
Elham Amiri, Department of Management, Central Tehran Branch, Islamic Azad University, Tehran, Iran
Hamed Olfati, Department of Electrical and Computer Engineering, University of Tehran, Tehran, Iran
ID 119 User Experiences of the General Population on Accessible Web Interface
Jia Lin Cheoh, Department of Computer Science, Purdue University, West Lafayette, Indiana, USA
Jiaxin Wang, Department of Computer Engineering, Purdue University, West Lafayette, Indiana, USA
Zhibo Hou, Department of Electrical Engineering, Purdue University, West Lafayette, Indiana, USA
Siqing Wei, Department of Engineering Education, Purdue University, West Lafayette, Indiana, USA
Prof. Daniel Ferguson, Department of Engineering Education, Purdue University, West Lafayette, Indiana, USA
Prof. Matthew Ohland, Department of Engineering Education, Purdue University, West Lafayette, Indiana, USA
ID 120 Experimental Analysis of Program Motion Instruction of Industrial Robotics
Hayder Zghair, Engineering Department of Automated Manufacturing Systems, University of Baghdad, Baghdad.
Ahad Ali, A. Leon Linton Department of Mechanical Engineering, Lawrence Tech University, Southfield, MI, USA
ID 121 Medical tourism in Colombia: A documentary analysis of the components of economic, social and environmental sustainability
Oscar A. Vásquez-Bernal, School of Basic Science, Technology and Engineering, Universidad Nacional Abierta y a Distancia UNAD, Bogotá D.C, Colombia.
Benjamin Pinzón-Hoyos, School of Basic Science, Technology and Engineering, Universidad Nacional Abierta y a Distancia UNAD, Bogotá D.C, Colombia.
William E. Mosquera-Laverde, Faculty Administrative and Economic Sciences, Universidad Cooperativa de Colombia, Bogotá D.C, Colombia
ID 122 Advancing Digital Transformation: Integrated Digital Transformation Framework for a Successful Deployment
Munir Majdalawieh, Information Systems and Technology Management Department, Zayed University, Dubai, UAE
ID 123 Improving infrastructure of E-tailing in India for environmental sustainability
Usha Ramanathan, Nottingham Business School, Nottingham Trent University, United Kingdom
Muthu Mathirajan, Indian Institute of Science Bangalore, India
ID 124 Cohesiveness in Engineering Students Teams: Effect of Gender, Race, Year of Study, GPA, Previous Course Grade and Some Prerequisite Knowledge
Behzad Beigpourian, Department of Engineering Education, Purdue University, USA
Daniel M Ferguson, Department of Engineering Education, Purdue University, USA
Matthew W Ohland, Department of Engineering Education, Purdue University, USA
Siqing Wei, Department of Engineering Education, Purdue University, USA
ID 125 An Evaluation of the Quality Management Systems (QMS) at a South African Electricity State Owned Company Compared to the Requirement of ISO 9001:2015
Sambil Charles Mukwakungu, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
Jonathan Eljadael Kasongo, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
Kidoge Ibrahimu, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
ID 126 Two-stage Meta-Heuristic Algorithm for Parallel Machine Scheduling with Additional Resource Input in Shipyard Manufacturing
Soonkyo Lee, School of Industrial Management Engineering, Korea University, Seoul, South Korea
Taesu Cheong, School of Industrial Management Engineering, Korea University, Seoul, South Korea
Seokhyun Chung, Industrial & Operations Engineering, University of Michigan, Ann Arbor, MI, USA
ID 127 IoT sensors in Aquaculture – Barriers and Facilitators for sustainability in Brazilian Context
Ramakrishnan Ramanathan, University of Bedfordshire, United Kingdom
Yanqing Duan, University of Bedfordshire, United Kingdom
Tahmina Ajmal, University of Bedfordshire, United Kingdom
Feng Dong, University of Bedfordshire, United Kingdom
Samuel Van Ransbeeck, University of Bedfordshire, United Kingdom
Joaquim Manoel Monteiro Valverde, Instituto Federal de Educação, Brazil
Silma Battezzati Valverde, Instituto Federal de Educação, Brazil
ID 128 Application of Lean Management Systems in Pathology Laboratory Work Process and Laboratory Environment
Hatice Camgoz Akdag, Management Engineering Department, Istanbul Technical University, Istanbul, Turkey
Hür Bersam Bolat, Management Engineering Department, Istanbul Technical University, Istanbul, Turkey
Ahmet Haşim Arslan, Management Engineering Department, Istanbul Technical University, Istanbul, Turkey
Ecem Karacakaya, Management Engineering Department, Istanbul Technical University, Istanbul, Turkey
ID 135 Improved design of metered-dose inhaler techniques
Aezeden Mohamed, Department of Mechanical Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea
Peter Oyekola, Department of Mechanical Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea
John Pumwa, Department of Mechanical Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea
ID 136 Design and Construction of an Unmanned Ground Surveillance Vehicle
Oyekola Peter, Department of Mechanical Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea
Dr. Aezeden Mohamed, Department of Mechanical Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea
Prof. Nicholas Lambrache, Department of Mechanical Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea
Ebere Chuma, Department of Mechanical Engineering, Bells University of Technology, Ogun state, Nigeria
ID 137 New Class of Simple and Efficient Clustering Algorithms for Multiscale Mathematical Programming with Demand Data Applications
Falah Alhameli, University of Waterloo, Canada.
Alberto Betancourt-Torcat, University of Waterloo, Canada.
Mohammed Alkatheri, University of Waterloo, Canada.
Ali Elkamel, University of Waterloo, Canada.
Ali Almansoori, Khalifa University, Abu Dhabi, UAE
ID 138 Allocation of Hydrogen Produced via Power-to-Gas Technology to Various Power-to-Gas Pathways
Suaad S. Al-Zakwani, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
Azadeh Maroufmashat, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
Michael Fowler, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
Ali Elkamel, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
Ali Elkamel, Department of Chemical Engineering, Khalifa University, Abu Dhabi, UAE
ID 139 A Data Envelopment Analysis Approach to Determine Project Activities Weight Factor
Hadi Shirouyehzad, Department of Industrial Engineering, Islamic Azad University, Najafabad, Iran
Negin Berjis, Department of Industrial Engineering, Islamic Azad University, Najafabad, Iran
Javid Jouzdani, Department of Industrial Engineering, Golpayegan University of Technolog, Golpayegan, Iran
ID 140 System Dynamics as a Solution in Increasing Regional Cash of Daerah Istimewa Yogyakarta by Considering Employment Availability and Traffic Congestion
Zakka Ugih Rizqi, Department of Industrial Engineering, Islamic University of Indonesia, Yogyakarta, Indonesia
ID 141 Fuzzy AHP-based Study of Barriers to the Implementation of Cleaner Production in Textile Industry
Farzana Islam, Ahmed Shoyeb Raihan, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh
ID 142 Modeling of Supply Chain Risk in the Leather Industry
Ahmed Shoyeb Raihan, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology Dhaka, Bangladesh
Farzana Islam, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology Dhaka, Bangladesh
Syed Mithun Ali, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology Dhaka, Bangladesh
ID 143 Toward a Socio-Cognitive Engineering Readiness Level (SERL) to estimate the maturity of a multi-agent’s collaborative system
Cabour Garrick, Department of Physical Activity Sciences, Université du Quebec a Montreal, Montreal, Canada
Samuel Bassetto, Department of Physical Activity Sciences, Université du Quebec a Montreal, Montreal, Canada
Élise Ledoux, Department of Physical Activity Sciences, Université du Quebec a Montreal, Montreal, Canada
ID 144 Improving Modeling and Forecasting of Fuel Selling Price Using Support Vector Machines: Case Study
Zineb Aman, Moulay Ismail University Meknes, Morocco
Haj EL MOUSSAMI, Moulay Ismail University Meknes, Morocco
Younes Fakhradine EL BAHI, Moulay Ismail University Meknes, Morocco
Latifa Ezzine, Moulay Ismail University Meknes, Morocco
ID 145 Identification and Analysis of Factors Influencing Safety Culture in Drilling Industry Using Strategic Options Development and Analysis Methodology
Hadi Shirouyehzad, Department of Industrial Engineering, Najafabad Branch, Islamic Azad University, Isfahan, Iran
Mazdak Khodadadi Karimvand, Department of Industrial Engineering, Najafabad Branch, Islamic Azad University, Isfahan, Iran
Reza Dabestani, Department of Management and Economics, Tarbiat Modares University, Tehran, Iran
ID 146 Renewable Waste Water and Filtration System with Phytoremediation Used in Aquaculture of Freshwater Ornamental Fish
Charlotte Palao, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Glyda Aricon Marquez, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Kenneth Ibasco, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Lady Claudette Ferrer, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Patricia Sagge, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Maria Teresa B. Mendoza, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
ID 147 Proposing a Conceptual Model for Critical Success Factors Influencing Organizations’ Safety by Interpretive Structural Modelling
Hadi Shirouyehzad, Department of Industrial Engineering, Najafabad Branch, Islamic Azad University, Isfahan, Iran
Mazdak Khodadadi Karimvand, Department of Industrial Engineering, Najafabad Branch, Islamic Azad University, Isfahan, Iran
Reza Dabestani, Department of Management and Economics, Tarbiat Modares University, Tehran, Iran
ID 148 Development and validation of future-robust strategies: A system for a continuous strategy development and strategy review process using the sports car development as an example
Florian Marthaler, Karlsruhe Institute of Technology, Kaiserstr, Germany
Alen Rapo, Karlsruhe Institute of Technology, Kaiserstr, Germany
Markus Spadinger, Karlsruhe Institute of Technology, Kaiserstr, Germany
Albert Albers, Karlsruhe Institute of Technology, Kaiserstr, Germany
Andreas Siebe, ScMI – Scenario Management International AG, Klingenderstraße, Paderborn, Germany
ID 149 The influence of early stage project performance: Some project performance and outcome correlate
Hong Long Chen, Department of Business and Management, National University of Tainan, Tainan, Taiwan
ID 150 Establishment of Magnetic Levitation for Flood Prevention in Jakarta with Project Management Approach
Zakka Ugih Rizqi, Department of Industrial Engineering, Islamic University of Indonesia, Yogyakarta, Indonesia
Bella Aziz Dewanti Putri, Department of Industrial Engineering, Islamic University of Indonesia, Yogyakarta, Indonesia
M Iqbal Sabit, Department of Industrial Engineering, Islamic University of Indonesia, Yogyakarta, Indonesia
Shelly Elvina Salsabila, Department of Industrial Engineering, Islamic University of Indonesia, Yogyakarta, Indonesia
ID 151 Product Design Development of Ergonomic Mop: ANOMALI (An Ergonomic Mop for Healthy Life)
Zakka Ugih Rizqi, Department of Industrial Engineering, Islamic University of Indonesia Yogyakarta, Indonesia
Nurahlun Baet, Department of Industrial Engineering, Islamic University of Indonesia Yogyakarta, Indonesia
ID 152 Proposal of an intermodal transport cost structure of the cocoa productive chain for the logistic corridor between Yacopí and the port of Santa Marta
Jefferson Rubiano Forero, Investigative group (GIPIA), Universidad de Cundinamarca, Soacha, Colombia
Ceudiel Alexis Valero Portilla, Investigative group (SEPRO), Universidad Nacional de Colombia, Bogotá, Colombia.
Sebastien Erik Benoit Dufeu, Investigative group (SEPRO), Universidad Nacional de Colombia, Bogotá, Colombia.
ID 153 The Use of Contingency Reserves to Analyze Risk Response Actions in Project Management
Alvaro Cuadros, School of Civil Engineering and Geomatics, Universidad del Valle, Cali, Colombia
Leonardo Rivera PhD., School of Civil Engineering and Geomatics, Universidad del Valle, Cali, Colombia
Armando Orobio PhD., School of Civil Engineering and Geomatics, Universidad del Valle, Cali, Colombia
ID 154 Construction Project Scheduling Evaluation Considering Correlated Risk Analysis
Alvaro Cuadros, School of Civil Engineering and Geomatics, Universidad del Valle, Cali, Colombia
David Ramirez Soto, School of Civil Engineering and Geomatics, Universidad del Valle, Cali, Colombia
Armando Orobio PhD., School of Civil Engineering and Geomatics, Universidad del Valle, Cali, Colombia
ID 155 The Difference between Teams with No Female Students and Teams with Female Students for Peer Evaluation Behavior in Engineering Education
Chuhan Zhou, Department of Engineering Education, Purdue University, West Lafayette, USA
Sunjae Choi, Department of Engineering Education, Purdue University, West Lafayette, USA
Behzad Beigpourian, Department of Engineering Education, Purdue University, West Lafayette, USA
Siqing Wei, Department of Engineering Education, Purdue University, West Lafayette, USA
Daniel M Ferguson, Department of Engineering Education, Purdue University, West Lafayette, USA
Matthew W Ohland, Department of Engineering Education, Purdue University, West Lafayette, USA
ID 156 Implementation of Analytics Procedures to Predict Stock-Outs in store for a retailer. A case in Mexico
Cinthya Yaresi Tamez Silva, Business Management Engineering Department, University of Monterrey
Ana Patricia Sepúlveda González, Business Management Engineering Department, University of Monterrey
Martín Flores Maradiaga, Business Management Engineering Department, University of Monterrey
Juan Ignacio González Espinosa, Business Management Engineering Department, University of Monterrey
ID 157 A System Dynamics Model of Apparel Supply Chain Under Mass Customization
Marwa Issa, Fashion Design Department, Faculty of Arts and Design, Pharos University In Alexandria, Alexandria, Egypt.
Sherwet Elgholmy, Textile Engineering Department & Industrial Engineering, Faculty of Engineering, Alexandria University, Egypt
Aida Sheta, Textile Engineering Department & Industrial Engineering, Faculty of Engineering, Alexandria University, Alexandria, Egypt
M. Nashat Fors, Textile Engineering Department & Industrial Engineering, Faculty of Engineering, Alexandria University, Alexandria, Egypt
ID 158 A Lean Six Sigma Project to Reduce Waste and Variability in a Confectionery Manufacturing
José Daniel Ibarra, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, México
Andrés Robles, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, México
Alejandro Montemayor, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, México
Angel Iñiguez, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, México
Andrés Blanco, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, México
Alexis Torrecillas, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, México
ID 159 Composite Index Creation Using AHP and DEA: Efficiency Optimization for Industries
Andrea Irina Yzeiri, Odette School of Business, Management Science, University of Windsor, Windsor, Canada
Dr. Fazle Baki, Odette School of Business, Management Science, University of Windsor, Windsor, Canada
ID 160 Design of new plant layout using lean tools by eliminating wastes in material flow process
Sriram Srinivasan, Department of Mechanical Engineering, University of Windsor, Windsor, Canada
Harita Zikre, Department of Mechanical Engineering, University of Windsor, Windsor, Canada
ID 161 Analysis of Important conditions for supporting Logistics Cluster Integration
Teresa Verduzco-Garza, Engineering & Technologies School, University of Monterrey, San Pedro Garza García, Mexico
ID 162 Unravelling the Stereotypes of Women in Industrial Engineering
Elaiza E. Bautista, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Glyda Aricon B. Marquez, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Sheila May P. Gappi, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Jaypy T. Tenerife, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Maria Teresa B. Mendoza, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
ID 163 Design and Development of An All-Around Air Controller for A Cost-Efficient Ventilation System and Structure
Erna Mae Antonio, Industrial Engineering Department, Technological Institute of the Philippines, Manila Philippines
John Cheferson De Belen, Industrial Engineering Department, Technological Institute of the Philippines, Manila Philippines
Tristan Javee Gomez, Industrial Engineering Department, Technological Institute of the Philippines, Manila Philippines
Hilario Mallari II, Industrial Engineering Department, Technological Institute of the Philippines, Manila Philippines
Maria Teresa B. Mendoza, Industrial Engineering Department, Technological Institute of the Philippines, Manila Philippines
ID 164 Design and Development of a Convertible Stair-Ramp System
Jannel Lyn F. Domondon, Industrial Engineering Department, Technological Institute of the Philippines Manila
Rajan Paul C. Garcia, Industrial Engineering Department, Technological Institute of the Philippines Manila
Noriel A. Clavo, Industrial Engineering Department, Technological Institute of the Philippines Manila
Maria Teresa B. Mendoza, Industrial Engineering Department, Technological Institute of the Philippines Manila
Mary Anne C. Sevilla, Industrial Engineering Department, Technological Institute of the Philippines Manila
ID 166 Optimal Operation of Cogeneration Plants in Industrial Facilities
Azadeh Maroufmashat, Department of Chemical Engineering, University of Waterloo, 200 University Avenue West, Waterloo, Canada
Nicholas Preston, Department of Chemical Engineering, University of Waterloo, 200 University Avenue West, Waterloo, Canada
Michael Fowler, Department of Chemical Engineering, University of Waterloo, 200 University Avenue West, Waterloo, Canada
Ali Elkamel, Department of Chemical Engineering, University of Waterloo, 200 University Avenue West, Waterloo, Canada, Department of Chemical Engineering, Khalifa University, Abu Dhabi, UAE
ID 167 An Optimization Strategy for Managing Surplus Electricity through P2G Pathways
Lingyi Gu, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Jeeyoung Kim, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Joohyung Ko, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Azadeh Maroufmashat, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Michael Fowler, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Ali Elkamel, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
ID 168 Stator Teeth Pairing Design of Dual Radial Flux Permanent Magnet Generator for Cogging Torque Reduction
Jin-Hyung Yoo, Kyungnam University, South Korea
Seon-Hwan Hwang, Kyungnam University, South Korea
Tae-Uk Jung, Kyungnam University, South Korea
ID 169 Flexible Operation of Polygeneration Energy Systems with Renewable Energy
Tuhin Poddar, Department of Chemical Engineering, University of Waterloo, Waterloo, ON, Canada
Ali Elkamel, Department of Chemical Engineering, University of Waterloo, Waterloo, ON, Canada
Peter L. Douglas, Department of Chemical Engineering, University of Waterloo, Waterloo, ON, Canada
Ali Almansoori, Department of Chemical Engineering, Khalifa University of Science and Technology, Abu Dhabi, UAE
ID 180 Technology-Push based Product Engineering based on Future Scenarios: Application for deriving product strategies at BMW AG
Florian Marthaler, IPEK – Institute of Product Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
Bo Hu, IPEK – Institute of Product Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
Albert Albers, IPEK – Institute of Product Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
ID 181 A Lower Bound Analysis for the Flowshop Scheduling Problem with Makespan Minimization
Bruno de Sousa Alves, Electrical Engineering Department, Polytechnique de Montréal Montréal, Canada
Carlos Ernani Fries, Department of Production and Systems Engineering, Federal University of Santa Catarina, Florianópolis, SC, Brazil
ID 182 A review of Warehouse Performance in South African Manufacturing Sector
Nakedi Macdonald Magoro, Emmanuel Innocents Edoun, University of Johannesburg, South Africa
ID 184 The Prospect of Smart-Remanufacturing in Automotive SMEs: A Case Study
Sadaf Zahoor, Department of Mechanical, Automation and Materials Engineering, University of Windsor, Windsor, Canada
Walid Abdul-Kader, Department of Mechanical, Automation and Materials Engineering, University of Windsor, Windsor, Canada
Mohammad Zain, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, Pakistan
Amjad Hussain, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, Pakistan
Muhammad Salman Habib, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, Pakistan
ID 185 Sustainability Issues in Sputtering Deposition Technology
F.M. Mwema, Department of Mechanical Engineering Science, University of Johannesburg, South Africa
E.T. Akinlabi, Department of Mechanical Engineering, Covenant University, Ota, Nigeria
O.P. Oladijo, Botswana International University of Science and technology, Palapye, Botswana
ID 186 Exploring the Effect of RF Power in Sputtering of Aluminum Thin films-A Microstructure Analysis
F.M. Mwema, E.T. Akinlabi, Department of Mechanical Engineering Science, University of Johannesburg, South Africa
O.P. Oladijo, Department of Chemical, Botswana International University of Science and technology, Botswana
ID 187 Reducing Finished Cardboard Carton Inventory: A Case Study
Gabriel Schroeder, Universidad de Monterrey, San Pedro Garza, Garcia, N.L
Karen Treviño, Universidad de Monterrey, San Pedro Garza, Garcia, N.L
Bernardo Villarreal, Universidad de Monterrey, San Pedro Garza, Garcia, N.L
ID 188 Measurement and assessment of efficiency in technical and vocational education in Colombia using Data Envelopment Analysis
Yeison Ramos-Naranjo, School of Business Administration and Public Accounting, Universidad Nacional de Colombia, Bogotá, Colombia
Gloria Rodríguez-Lozano, School of Business Administration and Public Accounting, Universidad Nacional de Colombia, Bogotá, Colombia
ID 199 Usability Testing on Internet of Things-based Smart Gym Machine with All in One Concept Using Nielsen’s Heuristics
Zakka Ugih Rizqi, Department of Industrial Engineering, Islamic University of Indonesia Yogyakarta, Indonesia
ID 200 Identification of Dominant Customer Behavior Patterns among Different Sectors over Time; A Case Study
Shaya Sheikh, Department of Operations and Supply Chain Management, New York Institute of Technology, NY, USA
Vahid Kayvanfar, Department of Industrial Engineering, Amirkabir University of Technology, Tehran, Iran
Iman Gharib, Department of Management and Economic, Science and Research Branch Azad University, Tehran, Iran
Sahar Bigdeli, Department of Management, Economic and Accounting, Azad university of Tabriz, Tabriz, Iran
ID 201 IoT (Internet of Things) Based Heart-Rate Observation System
Saman Shahid, National University of Computer & Emerging Sciences (NUCES), FAST, Lahore Pakistan
Saima Zafar, National University of Computer & Emerging Sciences (NUCES), FAST, Lahore Pakistan
Mansoor Imam, National University of Computer & Emerging Sciences (NUCES), FAST, Lahore Pakistan
Muhammad Usman Chistee, National University of Computer & Emerging Sciences (NUCES), FAST, Lahore Pakistan
Haris Ehsan, National University of Computer & Emerging Sciences (NUCES), FAST, Lahore Pakistan
ID 202 Vehicle Routing Challenges in the Automotive Supply Chain
Robert R. Inman, Chief Data and Analytics Office General Motors Company, Warren, MI, USA
Rana Afzali-Baghdadabadi, Global Purchasing and Supply Chain General Motors Company, Warren, MI, USA
Baiyang Liu, Global Purchasing and Supply Chain General Motors Company, Warren, MI, USA
ID 203 An Affordable and Portable Technology for Real-Time Scheduling of Appliances in Smart Homes
Raman, R. Sowers, Department of Industrial and Enterprise Systems Engineering, University of Illinois at Urbana-Champaign, Urbana, USA
R. S. Sreenivas, Department of Industrial and Enterprise Systems Engineering, University of Illinois at Urbana-Champaign, Urbana, USA
ID 204 Assessing the Preparedness of Technology Business Incubators to Provide Services Aligned to the 4th Industrial Revolution: A South African perspective
Phumuza Langa, University of Johannesburg, South Africa
E.I Edoun, University of Johannesburg, South Africa
C. Mbohwa, University of Johannesburg, South Africa
ID 205 The Influence of nanostructured-TiC Coating on the Mechanical Properties of Ti6Al4V Alloys Grown by RF Magnetron Sputtering
O O Abegunde, Department of Mechanical Engineering Science, University of Johannesburg, Johannesburg, South Africa
E T Akinlabi, Department of Mechanical Engineering, Covenant University, Ota, Nigeria
P Oladijo, Materials and Metallurgical Engineering, Botswana International University of Science and Technology, Palapye, Botswana.
ID 207 TIG & MIG Hybrid Welded Steel Joint: A Review
Cynthia S. Abima, University of Johannesburg, South Africa
Stephen A. Akinlabi, University of Johannesburg, South Africa
Nkosinathi Madushele, University of Johannesburg, South Africa
Olawale S. Fatoba, University of Johannesburg, South Africa
Esther T. Akinlabi, University of Johannesburg, South Africa
ID 208 Evaluating Impacts of Coal Mining on South African environment: a step to actualizing society 4
Stephen Akinwale Akinlabi, Department of Quality and Operations Management, University of Johannesburg, South Africa
Augustin Madouma Ma Lewandja, Department of Quality and Operations Management, University of Johannesburg, South Africa
Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, South Africa
ID 209 Risk Associated with Non-Compliance of Organization Processes on Strategy Implementations
Stephen A. Akinlabi, Department of Quality and Operations Management, University of Johannesburg, South Africa
Virginia Harris, Department of Quality and Operations Management, University of Johannesburg, South Africa
Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, South Africa
ID 210 Influence of Ethical Aspects on the Construction Industry Performance in Egypt
Mohamed Ahmed Azzab, Production Engineering Department, Faculty of Engineering, Alexandria University, Egypt
Mohamed Wagih Badawi, Production Engineering Department, Faculty of Engineering, Alexandria University, Egypt
ID 211 Self-Compacting High-Performance Concrete from Chemical & Mineral Admixtures
Shahid Ali, Department of Civil Engineering, National University of Computer & Emerging Sciences (NUCES), FAST, Lahore Pakistan.
Saman Shahid, Department of Civil Engineering, National University of Computer & Emerging Sciences (NUCES), FAST, Lahore Pakistan.
Bilal Ibrahim, Department of Civil Engineering, National University of Computer & Emerging Sciences (NUCES), FAST, Lahore Pakistan.
ID 212 Decontamination of heavy metals in water aligned with Operational Excellence
Jacobo Tijerina Aguilera, Consulting and Research Division, Universidad de Monterrey, México
Nancy Lucero Tapia Ruíz, Consulting and Research Division, Universidad de Monterrey, México
Gerardo Espinosa Garza, Consulting and Research Division, Universidad de Monterrey, México
Imelda de Jesús Loera Hernández, School of Engineering and Science, Instituto Tecnológico y de Estudios Superiores de Monterrey, México
ID 213 Productivity in Decontamination of heavy metals in water with orange peel
Jacobo Tijerina Aguilera, Consulting and Research Division, Universidad de Monterrey, México
Nancy Lucero Tapia Ruíz, Consulting and Research Division, Universidad de Monterrey, México
Gerardo Espinosa Garza, Consulting and Research Division, Universidad de Monterrey, México
Imelda de Jesús Loera Hernández, School of Engineering and Science, Instituto Tecnológico y de Estudios Superiores de Monterrey, México
ID 214 Empirical Modeling and Multi-Attribute Optimization of Al7075 Using Response Surface Methodology-Based Desirability Approach
Sadaf Zahoor, Department of Mechanical, Automotive, and Materials Engineering, University of Windsor, Windsor, Canada
Walid Abdul-Kader, Department of Mechanical, Automotive, and Materials Engineering, University of Windsor, Windsor, Canada
Adeel Shehzad, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, Pakistan
Muhammad Zain, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, Pakistan
Shoaib Muzaffar, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, Pakistan
Hamza Ijaz, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, Pakistan
ID 226 A Data-Driven Analytical Model for Predicting Functional Loss and Recovery Among Older Adults
Mahsa Madani Hosseini, Ted Rogers School of Management, Ryerson University, Toronto, Canada
Manaf Zargoush, Health Policy and Management, DeGroote School of Business, McMaster University, Canada
Farrokh Alemi, Department of Health Adm. & Policy, George Mason University, USA
ID 227 Implementing IoT for the Detection of Production Machine Failures
Ahmed Badwelan, Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia
Moath Alatefi, Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia
Atef M. Ghaleb, Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia
Ali M. Alsamhan, Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia
ID 228 Performance Comparison of Selected BHS Algorithms implemented on different FPGA platforms
Hafiz Usama Hashmat, The University of Lahore, Lahore, Pakistan.
Abdul Rauf, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia.
Dr. Anjum Ali, Founder and CEO, RDM Associates, Atlanta, Georgia, USA.
ID 229 Development of an Instrument to Assess the Performance of Systems Engineers
Niamat Ullah Ibne Hossain, Department of Industrial and Systems Engineering, Mississippi State University, USA
Morteza Nagahi, Raed Jaradat, Department of Industrial and Systems Engineering, Mississippi State University, USA
Charles Keating, Department of Engineering Management and Systems Engineering, Old Dominion University, VA, USA
ID 230 Impact of a Cloud-Based Applied Supply Chain Network Simulation Tool on Developing Systems Thinking Skills of Undergraduate Students
Jeanne-Marie Lawrence, Department of Industrial and Systems Engineering, Mississippi State University, USA
Niamat Ullah Ibne Hossain, Department of Industrial and Systems Engineering, Mississippi State University, USA
Morteza Nagahi, Department of Industrial and Systems Engineering, Mississippi State University, USA
Raed Jaradat, Department of Industrial and Systems Engineering, Mississippi State University, USA
ID 232 Developments in Conventional Machining for Sustainability-A State of Art Review
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
ID 233 Analysis and Optimization of Surface Roughness while Machining SS304 using Green Lubricant
Neeraj Sharma, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
ID 234 Tool Texturing and Machinability of Nickel-based Superalloys- A Review
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
ID 235 Analysis and Optimization of MRR in Powder-mixed EDM of AISI 5160 Steel
Neeraj Sharma, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
ID 236 A Systematic literature review of Digital Transformation
Mohamed-Iliasse Mahraz, Département Génie industriel, Ecole Mohammadia d’Ingénieurs, Mohammed V University of Rabat, Morocco
Abdelaziz Berrado, Département Génie industriel, Ecole Mohammadia d’Ingénieurs, Mohammed V University of Rabat, Morocco
Loubna Benabbou, Département Sciences de la Gestion, Université du Québec à Rimouski (UQAR) Campus de Lévis, Québec, Canada
ID 255 Lean Management and Analysis – An Empirical Study of a Traditional Shipbuilding Industry in Indonesia
Yugowati Praharsi, Shipbuilding Institute of Polytechnic Surabaya, Jl. Teknik Kimia Kampus ITS, Indonesia
M. Abu Jami’in, Shipbuilding Institute of Polytechnic Surabaya, Jl. Teknik Kimia Kampus ITS, Indonesia
Gaguk Suhardjito, Shipbuilding Institute of Polytechnic Surabaya, Jl. Teknik Kimia Kampus ITS, Indonesia
Hui-Ming Wee, Chung Yuan Christian University, Chung Pei, Chung Li City, Taiwan
ID 257 Forecast Model for Return Quality in Reverse Logistics Networks
Aamirah Mohammed Ashraf, Department of Mechanical, University of Windsor, Windsor, Canada
Walid Abdul Kader, Department of Mechanical, University of Windsor, Windsor, Canada
ID 258 Integrating Blockchain in Nuclear Fuel Supply Chains for Transparency of Hazardous Materials Flow
Aamirah Ashraf, University of Windsor, Canada
Walid Abdul Kader, University of Windsor, Canada
ID 259 Incentivizing Sustainability: Price Optimization for a Closed-Loop Apparel Supply Chain
Shayla Fitzsimmons, Dalhousie University, Halifax, Canada
Lisa Ma, Dalhousie University, Halifax, Canada
M. Ali Ülkü, Dalhousie University, Halifax, Canada
ID 260 Successful Reservoir Management for Thermal EOR Implementation for Sudanese Oil Fields- FNE
Dr. Husham A. Elbaloula, College of Petroleum Engineering & Technology, Sudan University of Science and Technology, Khartoum, Sudan
Dr. Tagwa A. Musa, College of Petroleum Engineering & Technology, Sudan University of Science and Technology, Khartoum, Sudan
ID 271 Industrial Engineering Students’ Perceptions of Flipped Classroom Experience
Ammar Aamer, Faculty of Engineering and Technology, Department of Industrial Engineering, Sampoerna University, Jakarta, Indonesia
Nesrine EL-Zine, Faculty of Arts and Humanities, Sana’a University, Sana’a Yemen
ID 272 A Novel Mathematical Programming Approach for Aggregate Proportioning: A Case Study for Highway Construction
Anil Kumar Agrawal, Civil Engineering Department, Indian Institute of Technology (BHU), VARANASI, INDIA
Devendra Mohan, Civil Engineering Department, Indian Institute of Technology (BHU), VARANASI, INDIA
ID 273 Radiation Effects on Boil-Off-Gas in an Above Ground LNG Storage Tank
Cherifi Mohammed, Laboratory of Petroleum Equipment Reliability and Materials Université M’Hamed Bougara, Algeria.
Benbrik Abderrahmane, Laboratory of Petroleum Equipment Reliability and Materials Université M’Hamed Bougara, Algeria.
ID 274 Influence of Wood Fly Ash Reinforcement on the Wear Behaviour of Friction Stir Processed Aluminium-Based Surface Matrix
Omolayo M. Ikumapayi, University of Johannesburg, South Africa
Esther T. Akinlabi, University of Johannesburg, South Africa
Oluseyi P. Oladijo, University of Johannesburg, South Africa
Stephen. A. Akinlabi, University of Johannesburg, South Africa
Jyotsna D. Majumdar, Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur, INDIA
ID 279 A Project Based Learning Tool for Industry 4.0 Manufacturing Engineering Education
Kapil Gupta, University of Johannesburg, Johannesburg, South Africa
Doctor Mukhawana, University of Johannesburg, Johannesburg, South Africa
Madindwa Mashinini, University of Johannesburg, Johannesburg, South Africa
ID 280 The Relationship Between Strategic Orientation and Organizational Performance in Online Transportation
Evo Sampetua Hariandja, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang, Indonesia
Josephine Mulyani, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang, Indonesia
ID 281 The Preliminary Study of Dynamic Marketing Capability of Hotel Industry: Generate Indicators from Practitioners
Evo Sampetua Hariandja, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Indonesia
Yokie Radnan Kristiyono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Indonesia
ID 282 Service Innovation Capability of Hotel Industry: The Preliminary Study to Generate Indicators from Practitioners
Evo Sampetua Hariandja, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Indonesia
Juniarty, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang, Indonesia
ID 283 Customer Satisfaction Survey of Quality Management System in the Medical Industry
Sihle Mankazana, Department of Quality and Operations Management, University of Johannesburg, South Africa
Matimba Davis Mabasa, Department of Quality and Operations Management, University of Johannesburg, South Africa
Temosho Bapela, Department of Quality and Operations Management, University of Johannesburg, South Africa
Rush Mpho Maphosa, Department of Quality and Operations Management, University of Johannesburg, South Africa
Sambil Charles Mukwakungu, Department of Quality and Operations Management, University of Johannesburg, South Africa
ID 284 Entrepreneurial Aspiration Among Office Technology And Management Students Of Federal Polytechnic Kaura Namoda Zamfara State, Nigeria: The Contribution Of Entrepreneurship Education And Social Networks
Maikudi Musawa, Universiti Tunn Hussein Onn Malaysia (UTHM), Malaysia
ID 298 A Novel Framework for Calculating the Maintenance Improvement Factor Based on Human Error Factors and Unbiased Expert Judgment
Rogelio Emmanuel Jáuregui Miramontes, Centre for Management of Technology and Entrepreneurship, University of Toronto, Canada
Pasi Petteri Luukka, School of business, Lappeenranta University of Technology, Lappeenranta, Finland
Yuri A. Lawryshyn, Centre for Management of Technology and Entrepreneurship, University of Toronto, Toronto, Canada
ID 299 Barriers to the Achievement of Sustainable Construction Project in Nigeria
Sanmi Olowosile, Department of Quantity Surveying, Federal University of Technology Akure, Nigeria
Ayodeji Oke, Sustainable Human Settlement and Construction Research Centre, University of Johannesburg, South Africa
Clinton Aigbavboa, Sustainable Human Settlement and Construction Research Centre, University of Johannesburg, South Africa
ID 300 Drivers for Adoption of Automation and Robotics in the Construction Industry
Ayodeji Oke, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Clinton Aigbavboa, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Olayinka Omole, Department of Quantity Surveying, Federal University of Technology, Akure, Ondo State, Nigeria.
ID 301 Optimal Microgrid Sizing Incorporating Machine Learning Forecasting
Saheed Lekan Gbadamosi, Department of Electrical and Electronic Engineering, University of Johannesburg, South Africa
Nnamdi I. Nwulu, Department of Electrical and Electronic Engineering, University of Johannesburg, South Africa
ID 302 Combination of Corncob, Cornhusk, and Kirinyuh (Eupatorium odoratum L.) Leaf Extract as Materials of Anti-Termite Paper
Sigit Trimayanto, Departement of Chemistry, State University of Surabaya, Surabaya, Indonesia
Prestylia Ikke Kurnia Mayasari, Departement of Chemistry, State University of Surabaya, Surabaya, Indonesia
Faraqanita Dwi Novianti, Departement of Chemistry, State University of Surabaya, Surabaya, Indonesia
Dian Novita, Departement of Chemistry, State University of Surabaya, Surabaya, Indonesia
ID 304 A Study on Carbon Footprint
Omoniyi Durojaye, University of Johannesburg, RSA, South Africa
Timothy Laseinde, University of Johannesburg, RSA, South Africa
Ifetayo Oluwafemi, University of Johannesburg, RSA, South Africa
ID 305 Job Rotation model in production centers to reduce ergonomic risks due to work
Amirsalar Malekahmadi, Isfahan University of Technology, Iran
ID 306 Organizational Commitment of Lecturer: Investigation of Generation X in XYZ University
Yohana F. Cahya Palupi Meilani, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Indonesia
Evo Sampetua Hariandja, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Indonesia
ID 307 Incorporate Data Analytics Tools to Optimize the SLP Method with Application to a Plant of a Leading Global Company
Edgar M. A. Granda-Gutiérrez, Universidad De Monterrey, Mexico
Frida Aizaneth Sevilla Medina, Universidad De Monterrey, Mexico
Laura Valeria González Aguirre, Universidad De Monterrey, Mexico
Silvia Stephanie Arreola Castillo, Universidad De Monterrey, Mexico
ID 308 Incentive Contracts in Project Management under Contractor’s Process Improvement
Mahsa Madani Hosseini, Ted Rogers School of Management, Ryerson University, Toronto, Canada
ID 309 Kinematics and Jacobian analysis of a three DOF sufficiently actuated large scale cable-driven robot with insufficient actuated structure
Kambiz Ghaemi Osgouie, Mechanical Engineering Department, Caspian Faculty of Engineering, University Of Tehran
Assal Haqiqat Pars, Mechanical Engineering Department, Caspian Faculty of Engineering, University Of Tehran
Ali ElKamel, Department of Chemical Engineering, University of Waterloo, Waterloo, Canada.
Azadeh Maroufmashat, Department of Chemical Engineering, University of Waterloo, Waterloo, Canada.
ID 310 Renewable energy expansion in Africa: An Overview of South Africa and Nigeria as a case study
Omoniyi Durojaye, Postgr School of Engineering Management, University of Johannesburg, RSA, South Africa
Timothy Laseinde, Postgr School of Engineering Management, University of Johannesburg, RSA, South Africa
Ifetayo Oluwafemi, Postgr School of Engineering Management, University of Johannesburg, RSA, South Africa
ID 316 Review of Warehouse Performance in South African Manufacturing Sector
Tshepo Phuti Mabotja, Faculty of Business and Management Sciences, Cape Peninsula University of Technology, South Africa
Ebrahim Parker, Faculty of Business and Management Sciences, Cape Peninsula University of Technology, South Africa
ID 317 The Nexus between Finance and Agricultural Productivity in Nigerian’s agricultural sector
Jesusetemi Oluwafemi, Department of Quality and Operations Management, University of Johannesburg, South Africa
Pule Kholopane, Department of Quality and Operations Management, University of Johannesburg, RSA, South Africa
Ifetayo Oluwafemi, Postgraduate School of Engineering Management, University of Johannesburg, RSA, South Africa
Esther T. Akinlabi, Department of Mechanical Engineering Science, University of Johannesburg, RSA, South Africa
ID 318 Apparel supply chain optimization by developing e-commerce: An impact analysis
Shibbir Ahmad, Dhaka University of Engineering and Technology (DUET), Gazipur, Bangladesh.
Md. Kamruzzaman, Dhaka University of Engineering and Technology (DUET), Gazipur, Bangladesh.
Md.Salim Hossain, Department of CSE, Uttara University, Uttara,Dhaka, Bangladesh
Md.Mijanur Rahman, Department of CSE, Uttara University, Uttara,Dhaka, Bangladesh
ID 319 Mathematical modeling of supply chain optimization in apparel manufacturing
Shibbir Ahmad, Mechanical Engineering Department, Dhaka University of Engineering Technology, Gazipur, Bangladesh.
Md. Kamruzzaman, Mechanical Engineering Department, Dhaka University of Engineering Technology, Gazipur, Bangladesh.
Mahathir Mohammad Bappy, Industrial and Production Engineering, Shah Jalal University of Science & Technology, Sylhet, Bangladesh.
ID 320 An Application of Industry 4.0 in Agriculture in Nigeria
Jesusetemi Oluwafemi, Department of Quality and Operations Management, University of Johannesburg, RSA, DFC Campus, South Africa.
Pule Kholopane, Department of Quality and Operations Management, University of Johannesburg, RSA, DFC Campus, South Africa.
Ifetayo Oluwafemi, Department of Quality and Operations Management, University of Johannesburg, RSA, DFC Campus, South Africa.
Esther T. Akinlabi, Department of Mechanical Engineering Science, University of Johannesburg, RSA, APK Campus, 2006, South Africa
ID 324 On Minimum Cost Non-Uniform Sampling Schemes for Optimal Design of Control Charts: Application to X ̅ and T^2 Control Charts
Mojtaba Aghajanpoorpasha, University of Calgary, Calgary, Canada
Rob Deardon, University of Calgary, Calgary, Canada
ID 325 Incorporating a Reliability Engineering Tool in Economic and Economic Statistical Design of Control Charts With Non-Uniform Inspection Scheme
Shabnam Fani, University of Calgary, Calgary, Canada
Mojtaba Aghajanpoorpasha, University of Calgary, Calgary, Canada
ID 327 Evaluation assessment of Warehouse Performance in Manufacturing Industries
Macdonald Nakedi Magoro, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Dr Emmanuel Edoun, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 346 Zack Algorithm: A Heuristic Approach to Solve Transportation Problem
Zakka Ugih Rizqi, Department of Industrial Engineering, Islamic University of Indonesia, Yogyakarta, Indonesia
ID 347 Data Panel Model Solution in Forecasting Investments through Energy Electricity and Government Policy in Indonesia
Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Indonesia
John Tampil Purba, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Indonesia
ID 348 The Limited use of Information Technology on Services and Learning at Iqra Buru University
M Chairul Basrun Umanailo, Department of Agricultural and Forestry, University of Iqra Buru, Namlea, 97 571, Indonesia
ID 350 Developing a dynamic model for natural gas supply and demand system to optimize pricing and investment policies
Farzaneh Daneshzand, University of Waterloo, Canada
ID 354 Entrepreneurs: The Driving Force behind Small Business
Iman Youssef, International University of California
Daw Alwerfalli, College of Engineering, Lawrence Technological University, Southfield, Michigan, USA
ID 355 Conducting a Feasibility Analysis and Crafting a Winning Business Plan
Iman Youssef, International University of California
Daw Alwerfalli, Professor, College of Engineering, Lawrence Technological University, Southfield, Michigan, USA
ID 357 Impact of High Speed Railways in Regional Economy: A Regression Analysis
Sundaravalli Narayanaswami, Indian Institute of Management Ahmedabad, India
ID 358 Supply chain optimization with Genetic Algorithm focusing on right supplier selection at real time in apparel manufacturing
Shibbir Ahmad, SUST, Bangladesh
ID 361 Humans’ Perceptions of Handwritten Digits Generated by a Generative Adversarial Network
Jia Lin Cheoh, Department of Computer Science, Research Center for Open Digital Innovation, Purdue University, Indiana, USA
Sabine Brunswicker, Research Center for Open Digital Innovation, Purdue University, West Lafayette, Indiana, USA
ID 363 On Minimum Cost Non-uniform Sampling Schemes for Optimal Design of Control Charts: Application to X-bar and T2 Control Charts
A. Pasha, Department of Mathematics and Statistics, University of Calgary, Calgary, Canada
R. Deardon, Department of Mathematics and Statistics, University of Calgary, Calgary, Canada
ID 373 Water Crisis in The Southern Bangladesh: A Planning and Implementing GAP for Leveraging and Developing A Business Model Through Public-Private and Community Partnership (PPCP)
Khan Mohammad Elyas, Enterprise Development Officer, Winrock International, Khulna, Bangladesh
ID 374 Production Systems Design: Time Series Approach to Forecasting
Demetri Blackwood, Department of Industrial Engineering, Kettering University, Flint, MI, USA
Tanashki Frater, Department of Industrial Engineering, Kettering University, Flint, MI, USA
Navardo Henry, Department of Industrial Engineering, Kettering University, Flint, MI, USA
Chelsea Wright, Department of Industrial Engineering, Kettering University, Flint, MI, USA
ID 377 Maintenance of a highly perishable lifesaving product under a healthcare supply chain management
Biswajit Sarkar, Department of Industrial Engineering, Yonsei University, Seodaemun-gu, Seoul 03722, Korea
Jihed Jemai, Department of Industrial Engineering, Hanyang University, Seoul 04763, Korea
Mitali Sarkar, Department of Industrial Engineering, Yonsei University, Seodaemun-gu, Seoul 03722, Korea
ID 378 Transforming industrial engineering course content using an industry 4.0 MOOC based feedback approach
Rosine, Mechanical & Industrial Engineering Department, University of Johannesburg, Johannesburg, South Africa
Mouchou Tchamdjeu, Mechanical & Industrial Engineering Department, University of Johannesburg, Johannesburg, South Africa
Prof. Tien-Chien Jen, Mechanical Engineering Science, University of Johannesburg, Johannesburg, South Africa, DPhil: Mechanical Engineering, University of California
Dr. Opeyeolu Timothy Laseinde, Mechanical and Industrial Engineering Department, University of Johannesburg,Johannesburg, South Africa
ID 379 An Overview of Design Considerations for 3-wheel Vehicle Safety Improvement, considering Supplementary Restraint Systems industrial revolution
Opeyeolu Timothy Laseinde, Mechanical & Industrial Engineering Department, University of Johannesburg, Johannesburg, South Africa
Rosine, Mechanical & Industrial Engineering Department, University of Johannesburg, Johannesburg, South Africa
Mouchou Tchamdjeu, Mechanical & Industrial Engineering Department, University of Johannesburg, Johannesburg, South Africa
ID 386 Implementation of Six Sigma in Service Industry in Cyrenaica, Libya: A Case Study
Salem Lakrash, Leon Linton Department of Mechanical Engineering, Lawrence Technological University, Southfield, MI, USA
Ahad Ali, Leon Linton Department of Mechanical Engineering, Lawrence Technological University, Southfield, MI, USA
Duane Shortt, Leon Linton Department of Mechanical Engineering, Lawrence Technological University, Southfield, MI, USA
ID 387 Reducing Variation at the Measuring System for the Copper Harpin Quality Inspection in Handling Material Stations
Sara Renata González Cruz, Instituto Tecnológico y de Estudios Superiores de Monterrey, Querétaro, México
Regina Márquez Reynoso, Instituto Tecnológico y de Estudios Superiores de Monterrey, Querétaro, México
ID 388 Optimization of a Parallel Robot 2RRR, Based on Metaheuristic Optimization Using Genetic Algorithms, Evaluating the Global Performance Index System for Kinematic.
Javier Sanjuan de Caro, Department of Mechanical Engineering, University of Wisconsin Milwaukee, USA
Mohammad Habibur Rahman, Department of Mechanical Engineering, University of Wisconsin Milwaukee, USA
Elias Muñoz Montenegro, Department of Mechanical Engineering, Universidad del Norte, Barranquilla, Colombia
Miguel Padilla Ramirez, Department of Mechanical Engineering, Universidad del Norte, Barranquilla, Colombia
ID 389 Application of Lean Manufacturing for Improving the Process at Blue sky Machining Corp.
Anvesh Rajak, Department of Mechanical and Industrial Engineering, University of Windsor, Windsor, Canada
Maganjot Singh Dhami, Department of Mechanical and Industrial Engineering, University of Windsor, Windsor, Canada
ID 390 Finite-Element modeling of Thermo-Mechanical phenomena in friction stir welding of AISI 4340 steel
Olanipekun Ayorinde Tayo, Department of Mechanical and Industrial Engineering, University of Johannesburg, South Africa
Timothy O. Laseinde, Department of Mechanical and Industrial Engineering, University of Johannesburg,
Nthabiseng Maledi, School of chemical and Metallurgical Engineering, University of Witwatersrand, Johannesburg, South Africa,
Madindwa Mashinini, Department of Mechanical and Industrial Engineering, University of Johannesburg
ID 391 Binary Alloy Simulation: A phase-field model study using semi Implicit Fourier spectral Algorithm
Olanipekun Ayorinde Tayo, Department of Mechanical and Industrial Engineering, University of Johannesburg, South Africa
Timothy O. Laseinde, Department of Mechanical and Industrial Engineering, University of Johannesburg
Nthabiseng Maledi, School of chemical and Metallurgical Engineering, University of Witwatersrand, Johannesburg, South Africa
Madindwa Mashinini, Department of Mechanical and Industrial Engineering, University of Johannesburg, South Africa
ID 392 The Impact of Machine Learning Algorithms on Benchmarking Process in Healthcare Service Delivery
Egbe-Etu Emmanuel Etu, Department of Industrial & Systems Engineering, Wayne State University, Detroit, MI 48202, USA
Celestine Aguwa, Department of Industrial & Systems Engineering, Wayne State University, Detroit, MI 48202, USA
Leslie Monplaisir, Department of Industrial & Systems Engineering, Wayne State University, Detroit, MI 48202, USA
Suzan Arslanturk, Department of Computer Science, Wayne State University, Detroit, MI 48202, USA
Joseph Miller, Department of Emergency Medicine, Henry Ford Hospital, Detroit, MI 48202, USA
ID 402 Exponential Smoothing with additional Seasonal Factor to Forecast Peak Season Demand
Mohammad Anwar Rahman, School of Engineering, Science & Technology, Central Connecticut State University, New Britain, USA
ID 403 A System-level Multi-center Quantitative Approach to Optimize Healthcare Providers’ Screening Behavior for Improved Quality of Care
Lan Jiang, Systems Science and Industrial Engineering, State University of New York at Binghamton, Binghamton, USA
Melissa A. Sutherland, Decker School of Nursing, State University of New York at Binghamton, Binghamton, USA
Bing Si, Systems Science and Industrial Engineering, State University of New York at Binghamton, Binghamton, USA
ID 404 Gap Analysis of Indonesian State-Owned Bank Internet Banking Website
Mahir Pradana, Telkom University, Jalan Terusan Buah Batu, Bandung, 40257, Indonesia
Wahyuddin S., AMIK Lamappapoleonro, Lalabata Rilau, Lalabata, Soppeng, 90812, Indonesia
Syarifuddin Syarifuddin, Telkom University, Jalan Terusan Buah Batu, Bandung, 40257, Indonesia
Adrianza Putra, Hasanuddin University, Jalan Perintis Kemerdekaan KM 10, Makassar, 90245, Indonesia
ID 405 Cycle Time Reduction in the Plastic Fuel Tanks Production Line: A Lean Manufacturing Case Study at Kautex Corporation
Faranak Sadeghitabar, Department of Mechanical, Automotive and Material Engineering, University of Windsor, Canada
Sardar Asif Khan, Department of Mechanical, Automotive and Material Engineering, University of Windsor, Canada
ID 406 Towards Optimization by Matching of Response Surfaces: finding Windows of Maximal Similarity
Díaz Pacheco, The Applied Optimization Group at Mayagüez, Industrial Engineering Department, University of Puerto Rico, PR, USA
Verónica, The Applied Optimization Group at Mayagüez, Industrial Engineering Department, University of Puerto Rico, PR, USA
Acosta Cervantes, The Applied Optimization Group at Mayagüez, Industrial Engineering Department, University of Puerto Rico, PR, USA
Mary C., The Applied Optimization Group at Mayagüez, Industrial Engineering Department, University of Puerto Rico, PR, USA
Cabrera-Ríos, The Applied Optimization Group at Mayagüez, Industrial Engineering Department, University of Puerto Rico, PR, USA
ID 407 The 2017-2018 Evaluation of the Operational Excellence Index Impact over the Private Sector Sustainability in Puerto Rico
Natali A. Camacho Cruz, Department of Industrial and Systems Engineering, Polytechnic University of Puerto Rico, San Juan, PR, USA
ID 409 Development of a VR based Game Environment for Wrist and Finger Rehabilitation
Aditya Pillai, Upper School, University School of Milwaukee, Milwaukee, WI, USA
Asif Al Zubayer Swapnil, Mechanical Engineering Department, University of Wisconsin-Milwaukee, Milwaukee, WI, USA
Mohammad Habibur Rahman, Mechanical Engineering Department, University of Wisconsin-Milwaukee, Milwaukee, WI, USA
ID 410 Development and Control of an Upper Extremity Robotic Exoskeleton for Rehabilitation
Tanvir Ahmed, Biomedical Engineering Department, University of Wisconsin, Milwaukee, Milwaukee, WI 53211, USA
Ivan A Rulik, Biomedical Engineering Department, University of Wisconsin, Milwaukee, Milwaukee, WI 53211, USA
Asif Al Zubayer Swapnil, Biomedical Engineering Department, University of Wisconsin, Milwaukee, Milwaukee, WI 53211, USA
Md Assad-Uz Zaman, Biomedical Engineering Department, University of Wisconsin, Milwaukee, Milwaukee, WI 53211, USA
Md Rasedul Islam, Biomedical Engineering Department, University of Wisconsin, Milwaukee, Milwaukee, WI 53211, USA
Mohammad Habibur Rahman, Mechanical Engineering Department, University of Wisconsin, Milwaukee, Milwaukee, WI 53211, USA
ID 419 Benchmarking Sustainability Performance of Organizations Using a Multicriteria Approach with Application to Canadian Market
Abbas Tavassoli, oncordia University (Montreal-Quebec), Canada
ID 423 Recycling PET with Containment Utility Bin Through Insertion and Tucking Operation (CUBITO) – 3D Printed Self-Assembles: 3D Shells
Rocio Fernandez, Applied Optimization Group, University of Puerto Rico Mayagüez, Puerto Rico
Veronica Diaz, Applied Optimization Group, University of Puerto Rico Mayagüez, Puerto Rico
Mauricio Cabrera, Applied Optimization Group, University of Puerto Rico Mayagüez, Puerto Rico
ID 424 Impact of Bus Rapid Transit efficiency on vehicle traffic of a Brazilian city
Augusto Ghiraldi, Industrial Engineering Department, Facens, Sorocaba, Brazil
Felippe K. Sousa Pereira, Industrial Engineering Department, Facens, Sorocaba, Brazil
Henrique Ewbank de M. Vieira, Industrial Engineering Department, Facens, Sorocaba, Brazil
Rodrigo Luiz Gigante, Industrial Engineering Department, Facens, Sorocaba, Brazil
ID 430 Simulation and Optimization of Manufacturing Systems
Kaustubh Kale, Lawrence Technological University, Michigan, USA
ID 432 Deliver or Not? Optimal revenue, capacity, and delivery fee policies for future drone-based delivery system
Zhangchen Hu, Department of Operations and Information Management, University of Massachusetts Amherst, Amherst, MA, USA
Senay Solak, Department of Operations and Information Management, University of Massachusetts Amherst, Amherst, MA, USA
Heng Chen, Department of Supply Chain Management, University of Nebraska-Lincoln, Lincoln, NE 68588, USA
ID 433 Prioritizing the key factors on Performance Measurement System (PMS) in Automotive Industry (Case Study: TONDAR 90 Deputy, Iran Khodro Company, Tehran, Iran)
Javad Khamisabadi, PhD in Industrial Management, Islamic Azad University, Tehran, Iran, Founder & CEO of World Academy of Science and Technology, Erzurum, Turkey
Mahmud Majd, Logistic Engineering Manager, IKCO, Tehran, Iran
Mohsen Naghedi Baradaran, Vice president, IKCO, Tehran, Iran
Mohammad Reza Motamed, IKCO- Peugeot CEO, Tehran, Iran
Mohammad Rouhina, Systems Director, IKCO, Tehran, Iran
ID 434 Neural Network and Internet of Things Implementation to aid Pedestrian Safety
Ujjwal Khanna, Concordia University, Concordia Institute for Information Systems Engineering (CIISE), Montreal, QC
Anjali Awasthi, Concordia University, Concordia Institute for Information Systems Engineering (CIISE), Montreal, QC
ID 435 Utilizing the blockchain technology as an effective means for supply chain traceability
Egbuonu Chinedu, Concordia Institute of Information and System Engineering, Concordia University, Montreal, Quebec, Canada
Prof Anjali Awasthi, Concordia Institute of Information and System Engineering, Concordia University, Montreal, Quebec, Canada
ID 436 Cartesian Trajectory Based Control of Dobot Robot
Md Rasedul Islam, BioRobotics Lab, University of Wisconsin-Milwaukee, Milwaukee, WI 53211, USA
Md Arifur Rahaman, BioRobotics Lab, University of Wisconsin-Milwaukee, Milwaukee, WI 53211, USA
Md Assad-uz-Zaman, BioRobotics Lab, University of Wisconsin-Milwaukee, Milwaukee, WI 53211, USA
Mohammad Habibur Rahman, BioRobotics Lab, University of Wisconsin-Milwaukee, Milwaukee, WI 53211, USA
ID 437 Using Neural Network to evaluate and predict Student Success in CECS graduate program
Aishwary Pawar , University of Michigan Dearborn
ID 438 Using Design of Experiments to Understand Oxidative Effects of Plasma Functionalization on the Surface Tension of Carbon Nanotubes
Mario Aquino, Department of Industrial & Manufacturing Engineering, Florida A&M University, FL, USA
Yourri-Samuel Dessureault, Department of Industrial & Manufacturing Engineering, Florida A&M University, FL, USA
Ayou Hao, Department of Industrial & Manufacturing Engineering, Florida A&M University, FL, USA
Richard Liang, Department of Industrial & Manufacturing Engineering, Florida A&M University, FL, USA
ID 439 Design of an autonomous electric vehicle for assistance in the movement of people with visual disabilities using vision algorithms and artificial intelligence
Juan José Encinas, Universidad Ricardo Palma, Chorrillos, Lima, Peru
Mario Chauca, Universidad Ricardo Palma, Chorrillos, Lima, Peru
ID 440 Using of Optimal Simulation Modelling to Reduce Radiotherapy Cancer Waiting Time and Improve Survival
Malakeh Saberi, Concordia Institute for Information Systems Engineering (CIISE), Concordia University, Montreal, QC, Canada
Anjali Awasthi, Concordia Institute for Information Systems Engineering (CIISE), Concordia University, Montreal, QC, Canada
ID 441 Manufacturing and Characterization of Carbon Fiber and Carbon Nanotube Hybrid Composites
Samantha Bell, Department of Industrial & Manufacturing Engineering, Florida A&M University, FL, USA
Claire Jolowsky, Department of Industrial & Manufacturing Engineering, Florida A&M University, FL, USA
Ayou Hao, Department of Industrial & Manufacturing Engineering, Florida A&M University, FL, USA
Richard Liang, Department of Industrial & Manufacturing Engineering, Florida A&M University, FL, USA
ID 442 Review of Optical Properties of Two-Dimensional Transition Metal Dichalcogenides
Andrew Voshell, Department of Physics and Engineering and Optical Science and Center for Applied Research, Delaware State University, Dover, DE, USA
Mukti M Rana, Department of Physics and Engineering and Optical Science and Center for Applied Research, Delaware State University, Dover, DE, USA
ID 443 Recommendation for Technician Strategies: Report Prepared for Orchid Orthopedic Solutions
Diana Graham, Industrial Systems and Manufacturing Engineering Department, University of Michigan Dearborn, MI, USA
Kevin Bancroft, Manufacturing Engineer, Orchid Chelsea, Chelsea, MI 48118, USA
ID 445 Decentralized Access Control Technique for Industrial Internet of Things
Kelechi Eze, The Center of Excellence for Communication Systems Technology Research (CECSTR), The SECURE Cybersecurity Center of Excellence, Electrical Engineering Department, Prairie View A&M University, Prairie View, TX, USA
Cajetan Akujuobi, The Center of Excellence for Communication Systems Technology Research (CECSTR), The SECURE Cybersecurity Center of Excellence, Electrical Engineering Department, Prairie View A&M University, Prairie View, TX, USA
ID 446 Tax Avoidance is Seen from the Perspective of Corporate Social Responsibility, Capital Intensity and Inventory Intensity in Developing Countries
Ilham Arifidianto, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
Nurul Aini, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
Rudi Harianto, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
Putri Zanufa Sari, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
Rony Wardhana, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
Frenky Yusuf, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
Anik Mubiatiningrum, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
Abdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia
ID 464 Better understanding the impacts of regulatory environmental policies on inventory and fleet replacement
Carlos Otero, University of California Davis, California, United State
ID 465 Efficiency as a Variable Intervening in Activity Based Management of Change Order and Economic Value Added to Improve Project Cost Performance on Building Construction
Budi Witjaksana, Department Civil Engineering, Surabaya University, Surabaya, Indonesia
ID 466 Reasons Subak Concerving Irrigation Water Resources
Euis Dewi Yuliana, University of Hindu Indonesia, Denpasar, Bali, Indonesia
Putu Desiana Wulaning Ayu, University of Hindu Indonesia, Denpasar, Bali, Indonesia
Gede Angga Pradipta, University of Hindu Indonesia, Denpasar, Bali, Indonesia
ID 467 Sustaining Traditional Irrigation System through Ecotourism Development: Case of Subak of Sembung, Denpasar, Bali, Indonesia
Gede Sedana, Faculty of Agriculture, Dwijendra University, Indonesia
ID 468 Model Child’s Inheritance Law Towards Business Assets in Intermarriage, of an Autralian and Indonesian Citizen
I Dewa Ayu Maheswari Adiananda, Faculty of Law, Universitas Airlangga, Indonesia
Chintya Dewi R.S, Faculty of Law, Universitas Airlangga, Indonesia
Nikmah Mentari, Faculty of Law, Universitas Airlangga, Indonesia
Dyah Arinta Renaningtyas, Faculty of Law, Universitas Airlangga, Indonesia
Sri Eka Wulandari, Faculty of Law, Universitas Airlangga, Indonesia
I Gede Eggy Bintang Pratama, Faculty of Law, Universitas Airlangga, Indonesia
Nur Alfiani, Faculty of Law, Universitas Airlangga, Indonesia
Resi Puspitosari, Faculty of Law, Universitas Airlangga, Indonesia
ID 469 Developing DC Motor Control Module Using PLC as PLC Learning Media in Electrical Engineering UNESA, Indonesia
Puput Wanarti Rusimamto, Faculty of Engineering, Universitas Negeri Surabaya, Indonesia
Munoto, Faculty of Engineering, Universitas Negeri Surabaya, Indonesia
Muchlas Samani, Faculty of Engineering, Universitas Negeri Surabaya, Indonesia
Ekohariadi, Faculty of Engineering, Universitas Negeri Surabaya, Indonesia
Endryansyah, Faculty of Engineering, Universitas Negeri Surabaya, Indonesia
Dadang Suprayitno, Faculty of Engineering, Universitas Negeri Surabaya, Indonesia
ID 470 Utilization of Google Spreadsheets as Activity Information Media at the Official Site Alphabet Incubator
Qurotul Aini, Universitas Raharja, Tangerang, Indonesia
Untung Rahardja, Universitas Raharja, Tangerang, Indonesia
Indri Handayani, Universitas Raharja, Tangerang, Indonesia
Marviola Hardini, Universitas Raharja, Tangerang, Indonesia
ID 472 The Cost Of Occupational Safety And Health (OSH) In Construction Project
Risma Marleno, Department of Civil Engineering, Construction Management Master Program, Universitas, Surabaya, Indonesia
Hanie Teki Tjendani, Department of Civil Engineering, Construction Management Master Program, Universitas, Surabaya, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 473 The effect of Turtle Blanket to the Baby’s Behavior in Early Breastfeeding Initiation
Sudarmi, Health Polythecnic Tanjungkarang, Midwifery Dept., Bandar Lampung, Lampung, Indonesia
Supriatiningsih, Health Polythecnic Tanjungkarang, Midwifery Dept., Bandar Lampung, Lampung, Indonesia
Nora Isa Tri Novadela, Health Polythecnic Tanjungkarang, Midwifery Dept., Bandar Lampung, Lampung, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 474 Implementation of Model Based Systems Engineering (MBSE) Tools to Model CubeSats Systems
Waleed Waris, A. James Clark School of Engineering, Systems Engineering Department, The Graduate School, University of Maryland, College Park, MD, USA
ID 481 Review of Affective Factors on Performance Measurement in Supply Chain Management System (Case Study: Iran Khodro Co, Iran)
Javad Navaei, North Tehran Branch, Islamic Azad University, Tehran, Iran
Mohammad Reza Kabaranzad Ghadim, Central Tehran Branch, Islamic Azad University, Tehran, Iran
Javad Khamisabadi, Islamic Azad University, Tehran, Iran and Founder & CEO of World Academy of Science and Technology, Erzurum, Turkey
ID 480 Design and Development of the Trailers Optimal Allocation and Schedule Model in the Supply Chain System with Considering Cross-Dock with Stochastic Planning
Javad Khamisabadi, Ph.D student, Faculty of Management, Firuzkuh Branch, Islamic Azad University, Tehran, Iran
Mohammad Reza kabaranzad Ghadim, Faculty of Management, Central Tehran Branch, Islamic Azad University, Tehran, Iran
Hasan Ali Aghajani Kasegar, Professor, Faculty of Management, Mazandaran University, Iran
Mohammad Mahdi Movahedi, Assistant professor, Faculty of Management, Firuzkuh Branch, Islamic Azad University, Tehran, Iran
ID 486 Capacity Planning and Optimization for a National Painting Factory using Simulation Modeling and Lean Manufacturing Tools
Nabeel Mandahawi, Nedal Ismail and Omar Wahdan, Department of Logistics and Supply Chain Management, Humber Institute of Technology and Advanced Learning, Toronto, Canada
ID 487 Empirical Evaluation of Smart Phones Data Entry Using Four Different Keyboards
Nosaiba Dar Mousa, State University of New York at Binghamton, Binghamton, USA
Nabeel Mandahawi, Humber Institute of Technology and Advanced Learning, Toronto, Canada
ID 488 Comparative Analysis in Sales Forecasting
Ghita Benboubker, School of Science and Engineering, Al Akhawayn University, Ifran, Morocco
Ilham Kissani, School of Science and Engineering, Al Akhawayn University, Ifran, Morocco
Asmae Mourhir, School of Science and Engineering, Al Akhawayn University, Ifran, Morocco
ID 489 Model of Teaching Style Toward Crawl Swimming Result Study
Surya Adi Saputra, Higher School Of Teacher Training and Pedagogy Kusumanegara Jakarta, Indonesia
Abdul Sukur, Faculty of Sports Science, Universitas Negeri Jakarta, Indonesia
James Tangkudung, Physical Education Post Graduate Program, Universitas Negeri Jakarta, Indonesia
Firmansyah Dlis, Physical Education Post Graduate Program, Universitas Negeri Jakarta, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 490 The Influence of Leadership on Academic Quality Assurance at the Private Nursing Vocational Schools
Susi Hartati, Departement of Education Management, Universitas Negeri Jakarta, Jl. Rawamangun Muka, Rawamangun, Pulo Gadung,
Jakarta Timur, Jakarta 13220, Indonesia and Departement of Nursing, STIKes Mitra Keluarga, Bekasi Timur, Jawa Barat 17113, Indonesia
Mukhneri Mukhtar, Matin, Departement of Education Management, Universitas Negeri Jakarta, Jakarta Timur, Jakarta 13220, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 491 The Government Expenditure Impact on the Private Investment, Economic Growth, and Poverty in Maluku Province
Tri Wahyuningsih, The Faculty of Economy, University of Iqra Buru, Namlea, Maluku, 97571, Indonesia
Mohammad Bugis, The Faculty of Economy and Business, Pattimura University, Ambon, Maluku, 92711, Indonesia
Abdul Talib Bon, The Faculty of Technology Management and Business, Universiti Tun Hussein, Malaysia
ID 492 The Effect Of Leg Muscle Power Flexibility And Achievement Motivation On Long Jump Ability
Zihan Novita Sari, Moch. Asmawi, Achmad Sofyan Hanif, and James Tangkudung, State University of Jakarta, Department of Physical Education, Jalan Rawamangun Muka, Pulo Gadung, East Jakarta city, Special Capital Region of Jakarta 13220 Indonesia.
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 493 Model Teaching Style and Motor ability on Sport Science Student Achievement Learning Outcome
Zulkifli, Universitas Islam Riau, Jalan Kharuddin Nasution No 113, Pekanbaru, Riau 28284 Indonesia
Moch. Asmawi and Ahcmad Sofyan Hanif, Universitas Negeri Jakarta, Jalan Rawamangun Muka, Jakarta 13220 Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 494 Computer Guided Laparoscopic Surgery Training
Gage Driscoll, University of Arizona Honors College, United States
ID 495 Threshold Based Control Policy for Energy Storage Operations with Demand Response and Renewable Energy
Awnalisa Walker, Binghamton University, NY, United States
ID 496 The Implications of Uncertainty in the Results of Simulation Models
Anna Paula Galvão Scheidegger, Industrial and Systems Engineering Department, Texas A&M University, College Station, TX 77845, USA
ID 500 Emerging Trends in Industry 4.0 with Innovative Case Study of Human Balance & Rehabilitation Engineering
Devdas Shetty, School of Engineering and Applied Sciences (SEAS), University of the District of Columbia, Washington, DC 200
Ph.D, P.E, School of Engineering and Applied Sciences (SEAS), University of the District of Columbia, Washington, DC 200
Saul B. Henderson, School of Engineering and Applied Sciences (SEAS), University of the District of Columbia, Washington, DC 20008
ID 501 Using Design of Experiments to Understand Effects of Chemical and Plasma Functionalization on the Surface Tension of Carbon Nanotubes
Mario Aquino, Yourri-Samuel Dessureault, Gabriela Gomez, Ayou Hao, and Richard Liang, Department of Industrial & Manufacturing Engineering, Florida A&M University – Florida State University College of Engineering, Tallahassee, FL 32310, USA
ID 502 Managing a green building architecture for sustainable energy consumption by system approach
Fatima Sadat Ghaderi, School of Architecture, College of Fine arts, University of Tehran
S. F. Ghaderi, School of Industrial Engineering, College of Engineering, University of Tehran
ID 503 Temperature Regulation of the Human Body using Thermoelectric Peltier Modules
Brandon Soundara, Department of Engineering Technology, Middle Tennessee State University, TN, USA
ID 504 Computational Modeling Using Multi-omics to Extract Early Predictive Signatures of T-cells Quality
Odeh-Couvertier V1, Dwarshuis N2, Colonna M3, Huang D2, Edison A3, Fernandez F, Roy K2, Kotanchek T4, and Torres-García W1
1Department of Industrial Engineering, University of Puerto Rico, Mayaguez, P.R
2Georgia Institute of Technology, Atlanta, GA
3University of Georgia, Athens, GA
4Evolved Analytics
ID 505 Short-range Electric Cars Used in Multi-Hour Travels
Douglas W.E. Ferrier, College of Technology, Indiana State University, Terre Haute, IN. USA
ID 506 An Approach to Optimize Performance of Low Power Devices in IoT-Based Smart Home Using RED Active Queue Management Model
Ekele A. Asonye and Sarhan M. Musa, Electrical and Computer Engineering Department, Prairie View A&M University, Texas, USA
ID 507 WIP: How 3D Printing and CAD/CAM Design can Influence Students in Classes Outside of STEM; Inspiring Them to Pursue Careers in STEM
Fernando Monroy Faudoa, Univeristy of Texas, El Paso, United States
ID 508 Dynamic Operations of Distributed Data Center Electricity Load for use as Distributed Energy Resource (DER)
David D Gower, Department of Systems Science and Industrial Engineering, Binghamton University, Binghamton, NY 13902, USA
ID 509 Locating using clustering and capabilities of GIS (case study: Bank)
Sara Aryaee, Management Department, University of Tehran, Tehran, Iran
ID 510 How to find effective systems engineers?
Niamat Ullah Ibne Hossain, Mississippi State University, USA
ID 515 Process Improvement in a Plastic Manufacturing Industry using Six Sigma Tools
Kaustubh Kale, A. Leon Linton Department of Mechanical Engineering, Lawrence Technological University, Southfield, MI, USA
ID 516 Introduction to Improving Adaptive Snow-Sports through Engineering Design, Ergonomic Form and Function
Elizabeth O’Neill, Buffalo State College, NY, USA
ID 517 Why Rapid Prototyping
Moses Taaboo, Central Connecticut State University, USA
ID 518 VEX Nuclear Waste Carrier: Carrying and Transporting Nuclear Canisters
August Harris, Southern University and A&M College, Baton Rouge, Louisiana, USA
ID 519 Internet of Things Health Monitoring System Using Raspberry Pi
Jamila Brooks and Alison Brown, Talladega College, Talladega, AL, USA
ID 520 Modeling Renewable Energy
Nora Pamela Rubalcaba, Bachelor of Science of Industrial and Systems Engineering, The University of Texas at El Paso, TX, USA
ID 521: Statistical Analysis of the Drying Process at a Car Wash
Aisha Torres, Department of Industrial Engineering, Polytechnic University of Puerto Rico
ID 522: Internet of Things Health Monitoring System Using Raspberry Pi
Jamila Brooks, Delta Sigma Theta Sorority Inc.; Association for Computing Machinery
ID 523: IoT in Healthcare Smart Pill
Veronica Towianski , University of Detroit Mercy, Detroit, Michigan, USA