| |
Modeling and SimulationNOTE: The author in bold is the presenter.
|
|
location and strengthening of cellular network sites in order to maximize the net revenue and coverage space in critical situation
Ali Tajdin, Mazandaran university of Science and Technology (Iran) |
Mental Model Moderation, Modification and Managing (5M) framework, a System Dynamics and Brunswikian Lens Model approach to Complex Decision Making
Wissam EL Hachem, University of Bergen (Norway); Joseph Khoury, Methode Electronics Inc (Malta); Ramy Harik, University of South Carolina (United States) |
Using Digital Human Modeling to Predict Operator Performance of a Mobile Fluid Powered Patient Transfer Device
Brittney Jimerson, North Carolina A&T State University (United States); Eui Park, North Carolina A&T State University (United States) |
Modeling and Simulation of Queuing Systems Using Arena Software: A Case Study
Mageed Ghaleb, KSU (Saudi Arabia); Ibarhim Alharkan, KSU (Saudi Arabia); Umar Syarif, King Saud University (Saudi Arabia) |
Optimization model for the dairy sector
JAVIER D. FERNANDEZ LEDESMA, UNIVERSIDAD PONTIFICIA BOLIVARIANA (Colombia) |
Numerical analysis of two-phase bubbly flow in an industrial odor remover employing effective microorganisms solution
Haider Ali, Kyungpook National University (Korea, Republic of); Moon Kyu Kwak, Kyungpook National University (Korea, Republic of); Cheol Woo Park, Kyungpook National University (Korea, Republic of) |
Modeling of temperature field at outlet of continuous casting mold
Mounira Bourebia, Welding and NDT Research, Centre (CSC) B.P 64 Cheraga/ Algeria (Algeria); Salah Bouhouche, National Center for Scientific Research and Technology in Welding and Control Unit for Applied Steel and Metals URASM- CSC (Algeria); Hichem Maouche, Centre National de Recherche Scientifique et Technique en Soudage et Contrôle, Unité de Recherche Appliquée en Sidérurgie et Métallurgie URASM-CSC (Algeria); mouhamed chaour, National Center for Scientific Research and Technology in Welding and Control Unit for Applied Steel and Metals URASM- CSC (Algeria); soufiene boulkroune, National Center for Scientific Research and Technology in Welding and Control Unit for Applied Steel and Metals URASM- CSC BP 196.23000 Annaba, Algeria (Algeria); Lakhder Laouar, Badji M okhtar University BP12 -2300, Industrial Mechanics Laboratory Annaba, Algeria (Algeria) |
Flux Vector Control of an Induction Motor Drive for Energy-efficient Operation of a Centrifugal Pump
Iqbal Jahmeerbacus, University of Mauritius (Mauritius) |
Effect of horizontal walls emissivity on coupled double diffusive convection and non gray-gas radiation of air-H2O mixture in a cooperating case
ABDERRAHMANE BENBRIK, university M'Hamed Bougara, Boumerdes (Algeria); MOHAMMED CHERIFI, university M'Hamed Bougara, Boumerdes (Algeria); SIHAM LAOUAR-MEFTAH, (Algeria); Denis LEMONNIER, Institut P’ (UPR 3346), département Fluides, Thermique, Combustion (France) |
A Model to Incorporate Demand Response Programs in Security Constrained Unit Commitment
Mohamad Khademi Mehdi, (Iran); Javad Olamaee, (Iran); Abdosaheb Arjomand, (Iran) |
CLV model selection for segmentation perspective
Mohamed Ben Mzoughia, University of Tunis (Tunisia); Mohamed Limam, University of Tunis, Tunisia and Dhofar University, Oman (Tunisia) |
Modeling and Analysis of Workforce Management Decisions in Modern Call Centers
Aya Seada, (Egypt); Amr Eltawil, Egypt-Japan Univeristy for Science and Technology (Egypt) |
Airport Baggage Handling System Simulation Modeling Using SysML
James Lin, NTHU, Taiwan (Taiwan); Edward Huang, (United States); Ping-Hsi Shih, (Taiwan); Chun-Chih Chiu, (Taiwan) |
Investigation of Maintenance Assumptions for an Automotive Production line using Simulation Modeling
Annamalai Pandian, Saginaw Valley State University (United States); Ahad Ali, Lawrence Technological University (United States) |
Simulation and Analysis of a Bank Queuing System
Michael Mutingi, University of Botswana (Botswana); Herbert Mapfaira, (Botswana); Nosi P K Moakofi, University of Botswana (Botswana); Ambrosia Moeng, University of Botswana (Botswana); Charles Mbohwa, university of johannesburg (South Africa) |
Conceptual Modeling on Emergency Logistics, A Case Study Jeddah City, Saudi Arabia
Shougi Abosuliman, RMIT University (Australia) |
A Queuing Model for Health care Pharmacy Using Software Arena
Tariq Aziz, King Saud university (Saudi Arabia); Mohammed Alhaag, King Saud Unveristy (Saudi Arabia); Ibarhim Alharkan, KSU (Saudi Arabia) |
METHOD OF LINES BASED ON FINITE ELEMENT TECHNIQUE TO ANALYSE ELECTROMAGNETIC PROBLEMS
Tawanda Mushiri, University of Johannesburg (South Africa); Charles Mbohwa, university of johannesburg (South Africa) |
Photoelectric properties of Selenium
Hossam AlDeen Yousef, United Arab Emirates University (United Arab Emirates); Ahmed Benkraouda, United Arab Emirates University (United Arab Emirates); Ali Qarani, (United Arab Emirates); Hisham Hassan, United Arab Emirates University (United Arab Emirates); Mohamed El Shaer, UAEU (United Arab Emirates) |
Performance evaluation of IP-Ad Hoc gateways
Adel-Aissanou Karima, (Algeria); Abbas Karim, (Algeria); Aissani Djamil, (Algeria) |
Buoyancy ratio effects on coupled radiation and double-diffusive convection in non-gray air-H2O mixtures
SIHAM LAOUAR-MEFTAH, (Algeria); Denis LEMONNIER, Institut P’ (UPR 3346), département Fluides, Thermique, Combustion (France); Abderrahmane Benbrik, (Algeria); MOHAMMED CHERIFI, university M'Hamed Bougara, Boumerdes (Algeria) |
Modeling and Simulation for Enterprise Decision-Making: Successful Projects and Approaches
Noha Ramadan, UAE University (United Arab Emirates); Racha Ajami, UAE University (United Arab Emirates); Nader Mohamed, UAE University (United Arab Emirates); Sanja Lazarova-Molnar, (Denmark) |
Modeling Distributed Product Development Processes in Small and Medium Enterprises
Armen Mkrtchyan, MIT (United States); Jayakanth Srinivasan, MIT (United States) |
Developing a Patient Transfer Device Prototype Using Human Factors Techniques and Human Digital Modeling
Brittney Jimerson, North Carolina A&T State University (United States); Steven Jiang, North Carolina A&T State University (United States); Eui Park, North Carolina A&T State University (United States) |
Modeling Dispatching Buses with High Service Level
Ilham Kissani, Al Akhawayn University (Morocco (includes the Western Sahara)) |
Econometric Modeling and Forecasting of Tourism in Nepal
Dila Ram Bhandari, Tribhuvan University (Nepal) |
An Application of Neuro-Logit New Modeling Tool in Corporate Financial Distress Diagnostic
Waleed Almonayirie, (United Arab Emirates) |
Analyzing the Impact of Business Interoperability on the Performance of Cooperative Supply Chain Networks
Izunildo Cabral, UNIDEMI, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa (Portugal); Antonio Grilo, FCT-UNL (Portugal) |
USING SPREADSHEETS FEATURES TO SCHEDULE NON-IDENTICAL MULTI-STOREY BUILDING PROJECTS
Fatma Agrama, Menoufia Univ. (Egypt) |
Comparing RDS with QMC methods
Megdouda OURBIH, (Algeria); Linda KHALFI, (Algeria) |
VERSATILE MULTI-OBJECTIVE GENETIC OPTIMIZATION FOR NON-IDENTICAL MULTI- STOREY BUILDING PROJECTS
Fatma Agrama, Menoufia Univ. (Egypt) |
Survival function estimation with Nonparametric Adaptive Refined Descriptive Sampling algorithm
Mahdia AZZAL, Bejaia university (Algeria); Megdouda OURBIH, (Algeria) |
ON ADAPTATIVE ESTIMATION IN PERIODIC PURELY LONG MEMEORY MODELS.
BELAIDE Karima, Univ. A/Mira Bejaia (Algeria) |
Refined Descriptive Sampling in multidimention
Guebli Sofia, University of Bejaia (Algeria); Ourbih Megdouda, (Algeria) |
| |
| |
