Plenary Speakers
2nd IEOM Global Lean Six Sigma
Speaker Registration: https://www.xcdsystem.com/IEOM/attendee/index.cfm?ID=Ql0Fn1s
IEOM Lean Six Sigma focuses on best practices. It includes the following areas but not limited to:
- 5S
- Continuous Improvement
- Deming’s Plan-Do-Check-Act
- Design for six sigma
- JIT
- Kaizen
- Kanban
- Lean Enterprise
- Lean Production
- Lean Thinking
- Pull Production Systems
- Six Sigma in Offices
- Six Sigma in Services
- SMED
- Structured Problem Solving
- Takt time
- The Toyota Way
- Value Stream Mapping
- Waste Elimination
- or similar topics
Each speaker needs to submit a title of the talk, photo and a short bio as well as power point presentation. If you are interested to be distinguished feature speaker, please contact info@ieomsociety.org for details.
All speakers need to register and pay the registration fee.
May 9, 2023
Six Sigma Certification Workshop
Tuesday, 2:00 – 6:00 pm – Ballroom (Onsite)
Speaker: Dr. Ahad Ali, Lawrence Technological University, Southfield, Michigan, USA
Six Sigma Certification Topics
- Six Sigma Fundamentals
Define
- Project Charter
- Process Maps, SIPOC, Matrix Diagrams, Critical to Quality (CTQ) Metrics, and DPMO
- Pareto Chart
- SIPOC
Measure
- Process analysis
- Probability, Statistics and Distribution
- Data collection and analysis
- Gage Repeatability and Reproducibility (R&R)
- Process capability
- X-Bar Charts, Run Charts, Moving Average Charts, EWMA Charts, Attribute Charts, Takt Time, Standardization, Spaghetti Diagrams, and Setup Reductions
Analyze
- Value Stream Map
- Hypothesis Testing
- Goodness of fit test
- Regression Analysis
- Cause & Effect Diagrams
- Scatter Diagrams
- ANOVA
- Confidence Interval
Improve
- Lean Tools to reduce NVA: 5S, Kaizen, Seven Zeros, TPS Principles, FMEA, and Simulation
- Design of Experiments (DOE)
- Statistical Process Control (SPC)
- Analysis of Variance (ANOVA)
- Solutions Validation
Control
- Control Plan
- SPC
- Tracking
- DFSS
Dr. Ahad Ali
Associate Professor
Director of Bachelor of Science in Industrial Engineering
Director, Master of Science in Industrial Engineering
Director of Smart Manufacturing and Lean Systems Research Group
A. Leon Linton Department of Mechanical, Robotics and Industrial Engineering
Lawrence Technological University, Southfield, Michigan, USA
Executive Director, IEOM Society International
Dr. Ahad Ali is an Associate Professor and Director of Bachelor of Science in Industrial Engineering and Master of Science in Industrial Engineering in the A. Leon Linton Department of Mechanical, Robotics and Industrial Engineering at the Lawrence Technological University, Michigan. Dr. Ali is the Director of Smart Manufacturing and Lean Systems Research Group. He earned B.S. in Mechanical Engineering from Khulna University of Engineering and Technology, Bangladesh, Masters in Systems and Engineering Management from Nanyang Technological University, Singapore and Ph.D. in Industrial Engineering from University of Wisconsin-Milwaukee. Dr. Ali is the Executive Director of IEOM Society and Conference Chair of the Sixth International Conference on Industrial Engineering and operations Management, Kuala Lumpur 2016. He advised six doctorate students in Doctor of Engineering in Manufacturing Systems. Dr. Ali has published journal and conference papers. He was past President of IIE Lean Division. Dr Ali has done research projects with Chrysler, Ford, DTE Energy, Delphi Automotive System, GE Medical Systems, Harley-Davidson Motor Company, International Truck and Engine Corporation (ITEC), National/Panasonic Electronics, and Rockwell Automation. His research interests include quality, reliability, six sigma, manufacturing, simulation, optimization, scheduling, maintenance, e-manufacturing, lean, CAE and GD&T and. He is a member of ASEE, IEEE, IEOM, INFORMS, and SME.
May 10, 2023
Toyota Kata Workshop
Speaker: Mr. Dave Harry
Wednesday, May 10, 2023, 2:00 – 6:00 pm – Room 1 (Ballroom – Onsite)
TOYOTA KATA: THE SECRET SAUCE FOR TOYOTA PRODUCTION SYSTEM
Presented By: Dave Harry
Kata in the Classroom (KiC) workshops are based on Mike Rother’s “Toyota Kata” methodology and that Scientific Thinking is a life skill. It’s the basis for creativity and successfully pursuing seemingly unattainable goals. KiC demonstrates a teachable skill that anyone can learn — by combining a simple scientific striving pattern with practice routines called Kata – to help you learn meta-cognitive strategies. Many view Toyota Kata as the “secret sauce” of the Toyota Production System (TPS). Mike Rother wrote “Toyota Kata” to explain the secrets of TPS improvement sustaining methodology. How do we prepare for the future when we don’t know what the future will bring? We can’t predict how to get from A to B… we’re stumped and overwhelmed, there are time constraints and economic pressure. Dave Harry will share the “secret sauce” with IEOM and Lima Area University students through an intense hands-on “Kata in the Classroom” workshop. Be prepared to move fast!
ABOUT THE PRESENTER
DAVE HARRY, a.k.a. “The Process Whisperer®”
Retired U.S. Naval aviator
CEO of Process Whisperer® Consultants LLC
Tennessee, USA
Dave is a retired U.S. Naval aviator and currently CEO of Process Whisperer® Consultants LLC. He teaches LSS classes for TMG Inc of Newport News, VA. Prior to TMG, Dave was a Six Sigma and Productivity Consultant for the University of TN Center for Industrial Services. Dave is a “Kata Geek” and also an ASQ certified Six Sigma Black Belt. He is active in ASQ Sections and the ASQ Lean Enterprise Division Communications. In addition to ASQ, he also holds Black Belt Certification through Rolls-Royce and Northrop Grumman. He is a seasoned ASQ International Team Excellence Awards (ITEA) Judge. Dave is also currently on the Lean Division Board with the Institute of Industrial and Systems Engineers (IISE). Dave is on the Conference Advisory Committee for ASQs 2019 L&SS Conference in Phoenix as well as the Conference Committee for the IISE Engineering 2018 Lean Six Sigma Conference in Atlanta. A PMI certified PMP®, Dave also holds Lean Bronze Certification (LBC) through the SME/ASQ/AME/Shingo Institute Alliance and he holds three Master’s Degrees in management related fields. In addition to ASQ, PMI and IISE, Dave is also a member of the Society of Manufacturing Engineers (SME), the Association of Manufacturing Excellence (AME) and the American Production and Inventory Control Society (APICS). Dave lives in Greeneville TN.
May 11, 2023
Lean Six Sigma I
Thursday, May 11, 2023 – 8:00 – 9:45 am – Room 4 (Onsite)
Session Chair:
8:00 – 8:20 am, Thursday, May 11, 2023
Kevin Aza Valencia, CAPM®, SFPC
Project Manager
AFRY
Lima, Perú
8:20 – 8:40 am, Thursday, May 11, 2023
Flor de Maria Tapia Vargas
Planning and Manufacturing Consultant
Expert in Lean Manufacturing, Push & TOC Systems
Lima, Peru
Evaluation of Lean Manufacturing Implementations based on an analysis of the FII-UNMSM Digital
Industrial Engineer University of Lima (1988); Master in Production Engineering from the Federal University of Santa Catarina – Brazil (1996), and PhD in Education from the San Martín de Porres University (2014). Professional in Logistics of Materials and Services from the Universidad Católica de la Plata and School of Logistics Management and Supply Chain – Argentina (2007). Extensive experience in manufacturing and service companies (General Manager of Editora Futura S.A., Head of Production of Consorcio Industrial San Martín Dry Cleaning Plant, Lead Consultant of EPRs Implementations in Baan Perú S.A, among others). Teacher with more than 25 years of experience in Post-Graduate and Pre-Graduate Schools nationwide. Member of the Civil, Industrial and Road Engineering Research Group of the Ricardo Palma University. Extensive experience in Production and Productivity seminars in Private and Government Institutions in Peru and Brazil.
8:40 – 9:00 am, Thursday, May 11, 2023
Jaime Cortez
CEO and Founder
Arcor Group
Lima, Peru
9:00 – 9:20 am, Thursday, May 11, 2023
Gina Huamán S.
Supervisor de Carga Rodante y PDI, APM Terminals
CEO & Consultor en Soluciones Lean
Peru
9:20 – 9:40 am, Thursday, May 11, 2023
Claudia Garcia Urure
LSSBB – Lean Six Sigma Black Belt, Industrial Engineer
Continuous Improvement Engineer
Minera Chinalco Perú S.A.
Peru
9:40 – 10:00 am, Thursday, May 11, 2023
Ing. Hugo Chacón Moscoso
Director de la Escuela Profesional de Ingeniería Industrial
Facultad de Ingeniería y Arquitectura
Universidad de San Martín de Porres
Programa Acreditado por ABET, ASIIN, ICACIT y SINEACE
Av. La Fontana 1250 Urb. Santa Patricia, La Molina
Peru, Lima
May 11, 2023
Lean Six Sigma II
Thursday, May 11, 2023 – 2:00 – 3:45 pm – Room 4 (Onsite)
Session Chair: Ing. Hugo Chacón Moscoso
2:00 – 2:20 pm, Thursday, May 11, 2023
Gabriel Olivera Pazos
Sub Gerente de Mejora Continua
Derco Perú
Lima, Perú
2:20 – 2:40 pm, Thursday, May 11, 2023
Cristopher Ramírez, MBA, Six Sigma Blackbelt
Plant Manager – UHT
LAIVE S.A.
Peru
2:40 – 3:00 pm, Thursday, May 11, 2023
Mónica Baca
Blackbelt Lean Six Sigma
Analista Senior de Procesos – Reemplazo de Jefe Corporativo Ingeniería de Procesos
Interoc Corporativo
Peru
3:00 – 3:20 pm, Thursday, May 11, 2023
Cesar Luis Olivos Villasís, MBA. Ing.
General Coordinator Impulsat Business Incubator
Professor attached to the Department of Business Sciences
Universidad Católica Santo Toribio de Mogrovejo
Chiclayo, Perú
Alumni of the of the United States Department of State
Consultant Mentor Facilitator specialist in Business Models. Business Management. Startups. Innovation and Entrepreneurship. Manager of Entrepreneurship and Innovation Programs
Tittle in English: Frameworks for Entrepreneurship and Innovation from the University
Title in Spanish: Marcos de Trabajo para emprender e innovar desde la Universidad
Cesar Luis Olivos is an Master in Strategic Management in Information Technology from the University of Piura – UDEP and Master from the Miguel de Cervantes European University of Spain. Systems Engineer from the Santo Toribio de Mogrovejo Catholic University – USAT. Higher fifth. Master of Business Administration with a Mention in International Business from SIU Miami Florida. Master of Business Administration – MBA by EPG USIL. Member of the Instituto Empresa Sociedad IES USAT team, as General Coordinator of the Impulsat Business Incubator, he is also an Alternate Representative of USAT in COREMYPE and CODEMYPE. He was selected Facilitator in Innovative Entrepreneurship in the Program: Academy for Women Entrepreneur – AWE by the Embassy of the United States of America in Lima to coordinate AWE CHICLAYO. He was also invited Mentor in the international Eqwip Hubs Project with the Canadian Cooperation. With more than 14 years of experience Mentor and Facilitator trained in the Educational Startup Hero Startup. Selected Member of the Ylai Young Entrepreneurial Leaders of America Network of the United States Department of State. Entrepreneur – Innovative Intrapreneur. Member of the Association of Entrepreneurs of Peru – ASEP. Consultant specialist in Business Models. Startups. Innovation and Entrepreneurship. Mentor in Hero Startup – AWE Peru – WISE of the HUB UDEP – HULT PRIZE – ISC UNSA – Red Equipu – PUCP. Training as a Facilitator (SFC) in the OIT training methodology: Generate your Business (GIN) and Start your Business (ISUN). Selected participant in Youth Delegate (virtual format), at the VI Young Americas Forum, one of the three official forums of the IX Summit of the Americas 2022. Graduate scholarship holder of the Entrepreneurship and Innovation Program Train The Trainers of Project Korea Train The Trainers of INHA University – Koica 2022. Recently selected Startup evaluator in the University Stage of the C – Innovation Program of the Koica Peru Startup League. Invited as Technical Evaluator of Research Fund Projects 2022-2, a contest carried out by the Office of the Vice President for Research of the Catholic University of Santa María. He has served as Professor in Specialization Programs in entrepreneurship, innovation and business at Hero Startup, Emprende UP of the Universidad del Pacífico, COPEME LAMBAYEQUE among others. He has held various positions in the academic sector, with private business experience and with public institutions.
3:20 – 3:40 pm, Thursday, May 11, 2023
Suresh Done
Founder and Chief Architect
SNA Technologies, Southfield, Michigan, USA
and
Chairman
AEA Michigan Chapter
Commerce Twp, Michigan, USA
Suresh Done is the Founder and Chief Architect of SNA Technologies, which he founded in 2006 based in Southfield, Michigan, USA. Suresh has around 33 years of experience in IT and Engineering. He is an Enterprise Architect and a World-class Agile Leader. Suresh has helped many companies to transform and rejuvenate their business and technology. He has provided Strategic Advisory consulting services to major companies in Government, Banking, Telecom, Automotive, Health, and Retail Industries. Suresh is an Agile Guru and had developed methodologies like TOPAgile (Agile Architecture Methodology) and E2EAM (End to End Agile Methodology) that helps the organization to be agile from end to end (planning to implementation to operations). Using his expert guidance, many companies were able to reduce IT cost by more than 40% and improve efficiencies by more than 50%. Suresh is a renowned Speaker, Author, and World-class trainer/coach. He had presented at various conferences across the globe. He is the author of two books, TOGAF Simplified and Architecting Enterprise Transformations. He is a world-class trainer/coach, delivered several courses on TOGAF and Scaled Agile. he has certified thousands of professionals on certifications like TOGAF(R), ArchiMate(R), IT4IT(TM), DPBoK, Open FAIR, and several Scaled Agile courses like Leading SAFe, SAFe for Architects, SAFe Product Owner/ Product Manager etc. Suresh had provided consulting services to many organizations including Fortune 1000 companies. He had been in large-scale transformations, worked with CxOs to lead the change from the top-level management to the operational level. Suresh had helped organizations to develop business and innovation strategies. Suresh’s breadth of knowledge in business and technology had made these transformations seamless and organizations were able to reap the benefits in a shorter period of time.
3:40 – 4:00 pm, Thursday, May 11, 2023