Author Index
|
| |
|
Abbas, Khaled
Vendor Managed Inventory: A Case Study on Faragalla Food Industries in Egypt |
|
Abdouli, Fatmah
Composites Product and Process Quality |
|
Abdul Majid, Mazlina
Big Data Analysis and Storage |
|
Abodunrin, Ademola
Improving Obstacle Detection of Automated Guided Vehicles via Analysis of Sonar and Infrared Sensors Output |
|
Abolghasem, Azadeh
A Three-Stage Approach for Solving Location-Routing Problem in Hazardous Materials Transportation |
|
Abouel Nasr, Emad
Applications of Petri nets Based Models in Manufacturing Systems: A Review |
|
Abro, Sabah
MULTI-APPROACH EVALUATION OF ENTREPRENEURIAL SENIOR PROJECT COURSE |
|
Acuña Cardenas, Eliana
HOSPITAL LOGISTICS, A TOOL FOR AN INCREASED PRODUCTIVITY: HOSPITAL UNIVERSITARIO MAYOR (MEDERI) CASE |
|
Adel, Mohamed
Impact of Reverse Logistics Applications on Customer Satisfaction |
|
Afia, Nahid
Multi-Objective Supply Chain Network Design Under Demand Uncertainity Using Robust Goal Programming Approach |
|
agrifoglio, antonio
Renewable Sources and CCHP Techniques in "Technological Polo" (TP) of University of Catania (First step) |
|
Ahmad, Shibbir Ahmad
ANALYSIS OF AVAILABILITY OF FIRE FIGHTING EQUIPMENT IN SELECTED KNITTING GARMENT FACTORIES IN BANGLADESH |
|
Identification of Retention Time & Information Delays Applying Value Stream Mapping Technique in Apparel Manufacturing Organization |
|
PERFORMANCE MEASUREMENT AND PROCESS IMPROVEMENT IN TERMS OF OVERALL EQUIPMENT EFFECTIVENESS IN SPECIFIC SECTION OF SPECIFIC RMG SECTOR |
|
Akinlabi, Esther
Greening the construction industry |
|
Akrami, Milad
A case study job-shop project planning and scheduling problem |
|
Al Ameri, Ghubaisha
Composites Product and Process Quality |
|
Al Ameri, Naseefa
Composites Product and Process Quality |
|
Al Braiki, Balqis
Composites Product and Process Quality |
|
Al Haddad, Munir M
X-ray Image Segmentation by using Fuzzy Index measure Combined with Principle Component Analysis |
|
Al Jabri, Mansoor
Horizontal Directional Drilling Quality |
|
Optimisation Techniques in Civil Works and Electrical Contracting |
|
Al Neyadi, Shamsa
Horizontal Directional Drilling Quality |
|
Al-Ahmari, Abdulrahman
Applications of Petri nets Based Models in Manufacturing Systems: A Review |
|
Al-Humairi, Ali
New Intelligent Car Security System Using Sensor System and GPS |
|
Alaeddine, Nasser
An Emerging STEM Era in the Middle East |
|
ROADMAP FOR STIMULATING THE INNOVATIVE USE OF TECHNOLOGY IN HIGHER EDUCATION |
|
Alavifar, Seyed Amirhossein
Economic Risk Management in Oil and Gas infrastructure; A Case ?study - Low Density Polyethylene (LDPE) production unit of Amir ?Kabir Petrochemical complex in Iran |
|
Alharkan, Ibrahim
Efficient Metaheuristics for Multi-stage No-Wait Flexible Flowshop Scheduling Problem |
|
Alhazmi, Yassir
A Statistical Approach to Estimate the Correlation between Charging Stations Availability and Plug – In Electric Vehicles Sales in Canada |
|
Ali, Ahad
Operational Improvement of Warehouse Operations |
|
Alkhodari, Amani
Horizontal Directional Drilling Quality |
|
Optimisation Techniques in Civil Works and Electrical Contracting |
|
Almoghathawi, Yasser
A Multi-Criteria Decision Making Tool to Prioritize Network Component for Recovery based on Importance Measures |
|
Almonayirie, Waleed
Comparative Study between "Neuro-Logit" and Logistic Regression Analysis in Corporate Financial Distress Forecasting |
|
Alsayyed Ahmad, Basel
Composites Product and Process Quality |
|
Horizontal Directional Drilling Quality |
|
Impact of Cutting Forces on Machining Quality |
|
Impact of Learning by Objectives in Design & Manufacturing Courses |
|
Optimisation Techniques in Civil Works and Electrical Contracting |
|
Amaral, Fernando Gonçalves
Gaps between psychophysical demands and perceived workload – a framework for lean production system |
|
Ameri, Sattar
A Bayesian Approach for Early Stage Reliability Prediction of Evolutionary Products |
|
Amin, Mohamed
Component Rating Optimization Methodology for the Protection of Photovoltaic Solar Power System Components from Shading Effect |
|
André, Javier
Improving a Particle Swarm Optimization model to solve assignment problems in an industrial environment |
|
Aoki, Hirotaka
Gaze-Based Metrics for Consumers' Viewings of Printed Advertisements |
|
ARNAOUT, JEAN-PAUL
Evacuation of a Highly Congested Urban City: the Case of Beirut |
|
AZIZ, NOR FILIANIE
Best Performance Measurement System for Malaysian Small and Medium Enterprises |
|
Aziz, Tariq
Lean six sigma and innovation: A theoretical Frame work |
|
AZIZAN, NOOR AZLINNA
A Performance Measurement Systems; How are they different for Malaysian SME |
|
Baechli, Alexander
Use of Augmented Reality in Technical Documentation |
Top |
Banwet, D K
Cold Chain: An interaction analysis of Performance Attributes using Graph Theory |
|
Baseer, Majid
A Fuzzy AHP & Extent Analysis Based Approach for Commercial Software Evaluation. |
|
Domestic Buildings Thermal Demand from Renewable Energy Sources-A Case Study of UK |
|
BenAmor, Sarah
Sustainable project selection: A novel MCDA method |
|
Bhattacharyya, Bidyut Kr.
Performance Evaluation of the Proposed and Existing Waste Management System: Economic Analysis |
|
Bian, Linkan
Designing a Multimodal Transportation Network under Biomass Supply Uncertainty |
|
Designing a Reliable Bio-fuel Supply Chain Network considering Link Failure Probabilities |
|
Bin Mustafa, Shariman
An Environmental Impact Framework for Improving the Performance of Projects |
|
Application of Analytic Hierarchy Process Techniques in Multi-Criteria Decision Making Problems |
|
Evaluating Projects Delay Sources through '4 Ps' Framework Analysis |
|
Lean Construction Techniques: A Framework Towards Elimination of Waste in Construction Industry |
|
Busogi, Moise
A SVM-based Quality Assessment using Thermal Image DATA in Sealer Dispensing Process |
|
Computation of Manufacturing Complexity in a Mixed Model Assembly |
|
Cabrera, Mauricio
Characterization of Alzheimer's disease: An Operations Research Approach |
Top |
Caceres, Rebeca
Modeling and Simulation of Berthing Processes for a Panamanian Container Terminal using BPMN and Discrete Event Simulation |
|
Caldwell Marin, Eldon
Application of the Restricted Boltzmann Machine for the planning of maintenance in databases |
|
Improving a Particle Swarm Optimization model to solve assignment problems in an industrial environment |
|
Some implications of the use of renewable energy in production scheduling |
|
Traceable Petri Nets for the Supply of Multiple Production Lines with Variable Waste |
|
Castillo, Eduardo
Centralized Carrier Collaboration and Multi-Hub Location Optimization Using a Genetic Algorithm |
|
Global Warming Potential and Cost Minimization for the Centralized Carrier Collaboration and Multi-Hub Location Problem |
|
Cavazos, Judith
Process Improvement in Emergency Units. Two Analysis Cases |
|
Application of the Methodology Deflection in Humanitarian Logistics: A Supply approach from Agrifood Chains |
|
Chan, Chee-Ming
Implementation of OBE in a MoT Program: Lesson Learned |
|
Reviewing the Grades, Activities and Assessment in an Engineering Technology Course with relation to the Learning Styles |
|
Chang, Chin-Shiang
Developing a Polynomial-Fourier Series Model for Building's Electricity Consumption Forecasting |
|
Chen, Wei Tong
Apartment Building Management Performance Assessment Using Data Envelopment Analysis |
|
Developing a Polynomial-Fourier Series Model for Building's Electricity Consumption Forecasting |
|
chen, xiaoyu
Open Configuration: Framework and Definition |
|
Civit, Ozge
A SYSTEM DYNAMICS MODEL OF FLOW OF PATIENTS FROM THE ICU THROUGH THE STEP-DOWN UNITS |
|
Componation, Paul
Biofuel Production: Potential Requirements Integration |
|
Cook, Ken
MULTI-APPROACH EVALUATION OF ENTREPRENEURIAL SENIOR PROJECT COURSE |
|
Cram, Ana
Optimal Scheduling of an Anaerobic Digester Considering Multiple Feedstocks Using Genetic Algorithms |
|
Cruz, Yazeli
Characterization of Alzheimer's disease: An Operations Research Approach |
|
Cudney, Elizabeth
Insights of Quality Management Concepts in the Supply Chain |
|
Cuper, Jerry
MULTI-APPROACH EVALUATION OF ENTREPRENEURIAL SENIOR PROJECT COURSE |
|
Dao, Thien-My
A new part routing-based decisional algorithm for urgent fabrication through a cost-time model in a flexible manufacturing system |
Top |
Dareing, Tron
Optimal Hull and Mold Storage In a Lean Boat Manufacturing |
|
Das, Swapan
Performance Evaluation of the Proposed and Existing Waste Management System: Economic Analysis |
|
Davis, Dorian
Implementing a Taxonomy for the Development of a Database for a Type 2 Diabetes Mellitus Preventative Care Personalized Learning System |
|
Delgado, Ileana
Global Warming Potential and Cost Minimization for the Centralized Carrier Collaboration and Multi-Hub Location Problem |
|
Deliz, Jose
Searching Academic Excellence in IE Curriculum through Assessment |
|
Deo, Devdatta
Activity Alternative Selection Considering Stochastic Reliability in Project Planning |
|
Doblon, Reimon
Applying Lean Methodology in Determining Efficient Batch Size for Semiconductor Backend Operations |
|
Dourban, Alon
Threshold Function for the Optimal Stopping of Arithmetic Ornstein-Uhlenbeck Process |
|
Duvvuru, Gomanth
Operational Improvement of Warehouse Operations |
|
El Hakea, Ayman
Component Rating Optimization Methodology for the Protection of Photovoltaic Solar Power System Components from Shading Effect |
Top |
El-Nakib, Islam
Investigating the Impact of Supply Chain Practices on the Financial Performance of the Most Active Listed Firms in Egypt |
|
Elakkad, Eman
Vendor Managed Inventory: A Case Study on Faragalla Food Industries in Egypt |
|
Elbashir, Nimir
An Emerging STEM Era in the Middle East |
|
Elkharbotly, Amin
Multi-Objective Supply Chain Network Design Under Demand Uncertainity Using Robust Goal Programming Approach |
|
Elmabrouk, Saber
A Critical Evaluation of Climate-Related Risks Associated with Oil and Gas Industry in Libya |
|
Elmhedwi, Tawfik
A Critical Evaluation Of Climate-Related Risks Associated With Oil And Gas Industry In Libya |
|
A Critical Evaluation of Climate-Related Risks Associated with Oil and Gas Industry in Libya |
|
Elmhidwi, Taher
A Critical Evaluation of Climate-Related Risks Associated with Oil and Gas Industry in Libya |
|
Elrod, Cassandra
Insights of Quality Management Concepts in the Supply Chain |
|
ElSayed, Khaled
Horizontal Directional Drilling Quality |
|
Optimisation Techniques in Civil Works and Electrical Contracting |
|
Elzarka, Sara
Investigating the Impact of Suppliers Relationship Management on Firms' Performance: A Multiple Case Study Approach on Manufacturing Companies in Egypt |
|
The Investigation of Purchasing Process and Supplier Development Practices in Manufacturing Companies: Multiple Case Studies on Food Processing Sector in Alexandria, Egypt |
|
Vendor Managed Inventory: A Case Study on Faragalla Food Industries in Egypt |
|
Eslamipour, mohammad
Product Life Cycle Key to Sustainable Innovation |
|
Espiritu, Jose
Centralized Carrier Collaboration and Multi-Hub Location Optimization Using a Genetic Algorithm |
|
Global Warming Potential and Cost Minimization for the Centralized Carrier Collaboration and Multi-Hub Location Problem |
|
Optimal Scheduling of an Anaerobic Digester Considering Multiple Feedstocks Using Genetic Algorithms |
|
Esquivel, Karol
Improving a Particle Swarm Optimization model to solve assignment problems in an industrial environment |
|
Farfan, Juan
HOSPITAL LOGISTICS, A TOOL FOR AN INCREASED PRODUCTIVITY: HOSPITAL UNIVERSITARIO MAYOR (MEDERI) CASE |
Top |
Farrokhian, Reza
Assessing Capabilities for Innovation, The Case of Iranian Kalleh Meat Product Company |
|
Fawzy, Mostafa
Biofuel Production: Potential Requirements Integration |
|
Employees' Resistance to Change: Correspondence Tracking System Development |
|
Fernandez, Juan
Global Warming Potential and Cost Minimization for the Centralized Carrier Collaboration and Multi-Hub Location Problem |
|
FERNANDEZ-LEDESMA, JAVIER
AN INNOVATION MODEL WITH REPRESENTATIVE VARIABLES OF MARKETING AND TRADING |
|
FERREIRA, PEDRO
A case study on the use of practical problem-solving activities to quantitatively improve physics learning in engineering education |
|
Improving the quality of engineering education: using a Pitot tube system at fluid mechanics laboratories |
|
Theoretical and Practical Integrated: Engaging Engineering Students in Fluid Mechanics Class |
|
Fogliatto, Flávio Sanson
Gaps between psychophysical demands and perceived workload – a framework for lean production system |
|
Fries, Carlos Ernani
Application of Focus Groups and Learning Cycles on the A3 Thinking Methodology: the case of increasing machinery capacity at a steel plant |
|
Gaps between psychophysical demands and perceived workload – a framework for lean production system |
|
General Satisfaction Index (GSI) Applied to Organizational Climate Researches: a new approach focused on banking |
|
Reasons for adopting an ERP system in a public University in Southern Brazil |
|
Frini, Anissa
Sustainable project selection: A novel MCDA method |
|
Frugoli, Alexandre
A case study on the use of practical problem-solving activities to quantitatively improve physics learning in engineering education |
|
Improving the quality of engineering education: using a Pitot tube system at fluid mechanics laboratories |
|
Theoretical and Practical Integrated: Engaging Engineering Students in Fluid Mechanics Class |
|
Frugoli, Pedro
A case study on the use of practical problem-solving activities to quantitatively improve physics learning in engineering education |
|
Improving the quality of engineering education: using a Pitot tube system at fluid mechanics laboratories |
|
Theoretical and Practical Integrated: Engaging Engineering Students in Fluid Mechanics Class |
|
Fu, Hao
Anticipatory Shipping: A Commercial Application of Pre-positioning |
|
Gadhvi, Bhargav
Improving PID Integrated Active Suspension System by using TLBO optimized parameters |
Top |
gagliano, antonio
Renewable Sources and CCHP Techniques in "Technological Polo" (TP) of University of Catania (First step) |
|
Gamal, Ahmed
Impact of Reverse Logistics Applications on Customer Satisfaction |
|
Gandhi, Yash
Improving PID Integrated Active Suspension System by using TLBO optimized parameters |
|
Gangopadhyaya, Malay
Human Factors Analysis for Railway Coach and Bogie Maintenance Using AHP |
|
García Rodríguez, Luis Ricardo
Traceable Petri Nets for the Supply of Multiple Production Lines with Variable Waste |
|
Garcia Urdaneta, Victor
HOSPITAL LOGISTICS, A TOOL FOR AN INCREASED PRODUCTIVITY: HOSPITAL UNIVERSITARIO MAYOR (MEDERI) CASE |
|
Gawlik, Dennis
Hoshin Kanri: Harnessing the Collective Thinking of All Employees to Deploy Policies that Operationalize Strategic Goals |
|
Gedik, Ridvan
A Benders Based Rolling Horizon Algorithm for a Dynamic Facility Location Problem |
|
Ghafoorivarzaneh, Mostafa
Framework of Simulation Approach to Increase Energy Efficiency |
|
Optimal Hull and Mold Storage In a Lean Boat Manufacturing |
|
Ghaleb, Mageed
Efficient Metaheuristics for Multi-stage No-Wait Flexible Flowshop Scheduling Problem |
|
Ghasemi, Alireza
A case study job-shop project planning and scheduling problem |
|
Ghassemi Tari, Farhad
A Fuzzy Approach for Analyzing the Gap between the Desired and the Current Factors Pertaining to the Research and Development of the Iranian Nanotechnology |
|
Godilano, Ezrha
IMPROVEMENT OF PRODUCTIVITY RATE OF JIT # 262, CREAMS, LIQUIDS, LOTIONS DEPARTMENT OF AVON PRODUCTS MANUFACTURING INC. |
|
Gonzalez, Valerie
Characterization of Alzheimer's disease: An Operations Research Approach |
|
Hafez, Lobna
Investigating the Impact of Suppliers Relationship Management on Firms' Performance: A Multiple Case Study Approach on Manufacturing Companies in Egypt |
Top |
The Investigation of Purchasing Process and Supplier Development Practices in Manufacturing Companies: Multiple Case Studies on Food Processing Sector in Alexandria, Egypt |
|
Hannis, Richard
An Environmental Impact Framework for Improving the Performance of Projects |
|
Application of Analytic Hierarchy Process Techniques in Multi-Criteria Decision Making Problems |
|
Evaluating Projects Delay Sources through '4 Ps' Framework Analysis |
|
Lean Construction Techniques: A Framework Towards Elimination of Waste in Construction Industry |
|
Hassan, Ahmed
Impact of Reverse Logistics Applications on Customer Satisfaction |
|
Hening, Dyah
Important Soft Skills for Engineers to Succeed in a Working Environment |
|
hesham, sarah
Investigating the Impact of Suppliers Relationship Management on Firms' Performance: A Multiple Case Study Approach on Manufacturing Companies in Egypt |
|
Heydari, Habib
An integrated model of cellular manufacturing and supplier selection considering product quality |
|
Hong Long, Chen
Apartment Building Management Performance Assessment Using Data Envelopment Analysis |
|
Ibrahim Fakharaldien, Mohammed Adam
Big Data Analysis and Storage |
Top |
Iqbal, Maqadus
IMPACT OF STRESS ON EMPLOYEE PERFORMANCE OF IT PROJECTS IN PAKISTAN |
|
Isaza, Clara
Characterization of Alzheimer's disease: An Operations Research Approach |
|
Ismail, Mohamed
ROADMAP FOR STIMULATING THE INNOVATIVE USE OF TECHNOLOGY IN HIGHER EDUCATION |
|
Ismail Hammad, Khalid Adam
Big Data Analysis and Storage |
|
Jahanbani Fard, Mahtab
A Bayesian Approach for Early Stage Reliability Prediction of Evolutionary Products |
Top |
Jain, Nikunj Kumar
Impact of Operational Drivers on Repurchase Intention in e-fulfillment |
|
Linking e-fulfillment dimensions to shopping satisfaction and repurchase intention in e-tailing |
|
Jain, Preeti
Linking e-fulfillment dimensions to shopping satisfaction and repurchase intention in e-tailing |
|
Javadieh, Neda
Driving behaviour of elderly people: the Challenges and Opportunities |
|
Jiang, Steven
Human Factors System Approach to Identify Factors that Affect the Adoption of Ergonomic Technology in Healthcare |
|
Implementing a Taxonomy for the Development of a Database for a Type 2 Diabetes Mellitus Preventative Care Personalized Learning System |
|
Jien-Bin, Jian
Apartment Building Management Performance Assessment Using Data Envelopment Analysis |
|
Jiménez, Luis
Improving a Particle Swarm Optimization model to solve assignment problems in an industrial environment |
|
Jimerson , Brittney
Enhancing the Engineering Ethics Curriculum by Analyzing Students' and Faculty's Perceptions |
|
Human Factors System Approach to Identify Factors that Affect the Adoption of Ergonomic Technology in Healthcare |
|
Joshi, Rohit
Cold Chain: An interaction analysis of Performance Attributes using Graph Theory |
|
Jubidin, Syafiah Norsyahira
A New Performance Measurement Framework for Small and Medium Enterprises |
|
Kaid, Husam
Applications of Petri nets Based Models in Manufacturing Systems: A Review |
Top |
Kalashnikov, Vyacheslav
An Efficient Technique of Computing Pressure on Blades of Hydraulic Machines |
|
Kalashnykova, Nataliya
An Efficient Technique of Computing Pressure on Blades of Hydraulic Machines |
|
Kassem, Ahmed
The Impact of Managing Medicine Storage and Distribution Chain on Medicine Shortage: A Simulation Model for Managing Medicine Storage and Distribution in the Egyptian Market |
|
Khadem, Mohammad
Quantitative risk analysis in Oil and Gas Project using Monte Carlo Simulation |
|
Khalid, Samina
Review of Image Processing Techniques for Detection of Age-related Macoular Degeneration (ARMD) Literature Review |
|
Khan, Nawar
Driving TQM/BE Model based Sustainable Excellence Enterprise Framework |
|
Khoury, John
Evacuation of a Highly Congested Urban City: the Case of Beirut |
|
Kim, DongChul
A SVM-based Quality Assessment using Thermal Image DATA in Sealer Dispensing Process |
|
Kim, HyoungKyu
A SVM-based Quality Assessment using Thermal Image DATA in Sealer Dispensing Process |
|
Kim, Namhun
A SVM-based Quality Assessment using Thermal Image DATA in Sealer Dispensing Process |
|
Computation of Manufacturing Complexity in a Mixed Model Assembly |
|
Komaki, Mohammad
Cuckoo Search Algorithm for Hybrid Flow Shop Scheduling Problem with Multi-layer Assembly Operations |
|
Multi-Objective Non-Permutation Flowshop with Dependent Setup times and Missing Operations |
|
Koonce, David
Important Soft Skills for Engineers to Succeed in a Working Environment |
|
Krstovski, Saso
Optimization of an Asynchronous Manufacturing Production System Incorporating Mixed Operational Cycle Time Variation |
|
Kuhl, Michael
Activity Alternative Selection Considering Stochastic Reliability in Project Planning |
|
Laradi, Mohamed
Modeling Trading & Procurement Cycle based on Insourcing and Outsourcing strategy |
Top |
Lee, Wooyeol
Computation of Manufacturing Complexity in a Mixed Model Assembly |
|
Li, Xiaopeng
A Continuum Approximation Model for One-Way Electric Vehicle Sharing |
|
Li Feng, Andrés
Application of the Restricted Boltzmann Machine for the planning of maintenance in databases |
|
Lima, Iara
A case study on the use of practical problem-solving activities to quantitatively improve physics learning in engineering education |
|
Improving the quality of engineering education: using a Pitot tube system at fluid mechanics laboratories |
|
Theoretical and Practical Integrated: Engaging Engineering Students in Fluid Mechanics Class |
|
Liu, Shih-Wen
Developing a new variables sampling plan for products with multiple quality characteristics based on process yield |
|
Lotze, Netaya
Chatbots in Online Environments - A Linguistic Analysis |
|
M. El-Tamimi, Abdulaziz
Applications of Petri nets Based Models in Manufacturing Systems: A Review |
Top |
Mabiza, Junior
Environmental Impacts Assessment of the Cleaning of Plant Off-gas in the recovery process of PGM at the Anglo American Platinum LTD, South Africa |
|
Inventory Assessment of the cleaning of Plant Off-gas in the recovery process of PGM at the Anglo American Platinum LTD, South Africa |
|
Mahdavi, Iraj
An integrated model of cellular manufacturing and supplier selection considering product quality |
|
Mahdi Paydar, Mohammad
An integrated model of cellular manufacturing and supplier selection considering product quality |
|
Mahmoudabadi, Abbas
A Three-Stage Approach for Solving Location-Routing Problem in Hazardous Materials Transportation |
|
Mahmud, Fatimah
A New Performance Measurement Framework for Small and Medium Enterprises |
|
Malakooti, Behnam
Cuckoo Search Algorithm for Hybrid Flow Shop Scheduling Problem with Multi-layer Assembly Operations |
|
Multi-Objective Non-Permutation Flowshop with Dependent Setup times and Missing Operations |
|
MALIK, ABDUL RAUF
eHealth: Hurdles and Progress in K.S.A |
|
Mannan, M.A.
Capacity Building for Sustainable World: A Study on political practices and effect on world economy |
|
Manohar, Hansa Lysander
Impact of Green Supply Chain Management Attributes on Supply Chain Performance: Measurement Instrument Validity and Reliability Verification |
|
Impact of Knowledge and Attitude on Medical Practices of Over the Counter Medications |
|
Impact of Knowledge and Attitude on Practices of Over the Counter Medications |
|
Impact of Magnesium Intake and Supplementation on Improving the Quality of Life in Type II Diabetes Mellitus Patients |
|
Manohar, Hasitha
Impact of Knowledge and Attitude on Medical Practices of Over the Counter Medications |
|
Impact of Knowledge and Attitude on Practices of Over the Counter Medications |
|
MANOHAR, SHAMITHA
Impact of Magnesium Intake and Supplementation on Improving the Quality of Life in Type II Diabetes Mellitus Patients |
|
Martinez, José
Process Improvement in Emergency Units. Two Analysis Cases |
|
Martínez, Paloma
Process Improvement in Emergency Units. Two Analysis Cases |
|
Impact of 5S on quality, productivity and organizational climate. Two Analysis Cases |
|
Marufuzzaman, Mohammad
A Benders Based Rolling Horizon Algorithm for a Dynamic Facility Location Problem |
|
Designing a Multimodal Transportation Network under Biomass Supply Uncertainty |
|
Designing a Reliable Bio-fuel Supply Chain Network considering Link Failure Probabilities |
|
Managing Congestion in a Dynamic Multi-Modal Facility Location Problem |
|
Maruyama, Ursula
Impact of 5S on quality, productivity and organizational climate. Two Analysis Cases |
|
masood, syed
Driving TQM/BE Model based Sustainable Excellence Enterprise Framework |
|
Lean Manufacturing and Transformational Leadership |
|
Mazón Arce, Andrés
Traceable Petri Nets for the Supply of Multiple Production Lines with Variable Waste |
|
Mbohwa, Charles
Analysis of a gear train using finite element modelling |
|
Design of a crushing system that improves the crushing efficiency of gold ore at a local mine: case of Zimbabwe |
|
Design of a small scale cereal packaging machine suitable for developing countries |
|
Environmental Impacts Assessment of the Cleaning of Plant Off-gas in the recovery process of PGM at the Anglo American Platinum LTD, South Africa |
|
Finite element analysis of a car rocker arm |
|
Greening the construction industry |
|
Inventory Assessment of the cleaning of Plant Off-gas in the recovery process of PGM at the Anglo American Platinum LTD, South Africa |
|
Medal, Hugh
Designing a Multimodal Transportation Network under Biomass Supply Uncertainty |
|
Mehta, Vedant
Improving PID Integrated Active Suspension System by using TLBO optimized parameters |
|
Mendoza, Hector Mendoza
Modeling and Simulation of Berthing Processes for a Panamanian Container Terminal using BPMN and Discrete Event Simulation |
|
Mendoza Cortes, Valeria
HOSPITAL LOGISTICS, A TOOL FOR AN INCREASED PRODUCTIVITY: HOSPITAL UNIVERSITARIO MAYOR (MEDERI) CASE |
|
Merino C, Melissa
Some implications of the use of renewable energy in production scheduling |
|
Mishra, Rekha
Business Intelligence and Analytics: Paving way for Operational Excellence, Quality and Sustainability in Indian Banks |
|
mohamed, merihan
Investigating the Impact of Suppliers Relationship Management on Firms' Performance: A Multiple Case Study Approach on Manufacturing Companies in Egypt |
|
Mohamed Zain, Jasni
Big Data Analysis and Storage |
|
Molina Rivera, Karen
Application of the Restricted Boltzmann Machine for the planning of maintenance in databases |
|
Montoya, Carolina
Impact of 5S on quality, productivity and organizational climate. Two Analysis Cases |
|
Mora Barreira, André
Traceable Petri Nets for the Supply of Multiple Production Lines with Variable Waste |
|
Mora O, Carolina
Some implications of the use of renewable energy in production scheduling |
|
Moros Portilla, Santiago
HOSPITAL LOGISTICS, A TOOL FOR AN INCREASED PRODUCTIVITY: HOSPITAL UNIVERSITARIO MAYOR (MEDERI) CASE |
|
Morshedlou, Nazanin
A Multi-Criteria Decision Making Tool to Prioritize Network Component for Recovery based on Importance Measures |
|
Mullen , Jacqueline
Searching Academic Excellence in IE Curriculum through Assessment |
|
Mushiri, Tawanda
Analysis of a gear train using finite element modelling |
|
Design of a crushing system that improves the crushing efficiency of gold ore at a local mine: case of Zimbabwe |
|
Design of a small scale cereal packaging machine suitable for developing countries |
|
Finite element analysis of a car rocker arm |
|
MUSTAPHA, NOR MAHIRAH
A Performance Measurement Systems; How are they different for Malaysian SME |
|
Nisar, Asim
Driving TQM/BE Model based Sustainable Excellence Enterprise Framework |
Top |
nocera, francesco
Renewable Sources and CCHP Techniques in "Technological Polo" (TP) of University of Catania (First step) |
|
Novakova, Galia
Harnessing the Technology of Cloud Computing with Supply Chain Management |
|
Nuño, Pablo
Process Improvement in Emergency Units. Two Analysis Cases |
|
Oberoi, Amandeep Singh
Simulation analysis for sustainable manufacturing: A green roadmap |
Top |
Oh, YeongGwang
A SVM-based Quality Assessment using Thermal Image DATA in Sealer Dispensing Process |
|
Computation of Manufacturing Complexity in a Mixed Model Assembly |
|
OJO, Elizabeth
Greening the construction industry |
|
Sustainability- Competitive edge? |
|
olamaei, javad
Short Term Load Forecasting Using Optimized Neural Network with Harmony Search |
|
Oludapo, Samson
Allais paradox : Outsourcing Decision Making |
|
SUPPLY CHAIN INNOVATION - A MODERN APPLICATION OF LEAN AND AGILE METHODOLOGIES |
|
Oommen, Angela
A Multi-Criteria Decision Making Tool to Prioritize Network Component for Recovery based on Importance Measures |
|
Panja, Subhash Chandra
Human Factors Analysis for Railway Coach and Bogie Maintenance Using AHP |
Top |
Park, Eui
Enhancing the Engineering Ethics Curriculum by Analyzing Students' and Faculty's Perceptions |
|
Human Factors System Approach to Identify Factors that Affect the Adoption of Ergonomic Technology in Healthcare |
|
Predictive Model for Forecasting Clinical Outcomes of Rehabilitation Patients Using Advanced Technologies |
|
Parsaei, Hamid
An Emerging STEM Era in the Middle East |
|
ROADMAP FOR STIMULATING THE INNOVATIVE USE OF TECHNOLOGY IN HIGHER EDUCATION |
|
Pastrana, John
Modeling and Simulation of Berthing Processes for a Panamanian Container Terminal using BPMN and Discrete Event Simulation |
|
patania, francesco
One right method to use energy in accord with the Second Law of Thermodynamics : Technical Polo of Catania University ( Part one ) |
|
patania, francesco
Renewable Sources and CCHP Techniques in "Technological Polo" (TP) of University of Catania (First step) |
|
Patel, Mayuri
Improving PID Integrated Active Suspension System by using TLBO optimized parameters |
|
Patil, Rajendra
Effect Of EGR On The Performance Of Diesel Engine Fueled By Mauha Oil and It's Blends |
|
Pereira, Lilian
A case study on the use of practical problem-solving activities to quantitatively improve physics learning in engineering education |
|
Philip, Deepu
Simulation analysis for sustainable manufacturing: A green roadmap |
|
Pitts, Richard
Improving Obstacle Detection of Automated Guided Vehicles via Analysis of Sonar and Infrared Sensors Output |
|
Poch, Jordi
Application of the Methodology Deflection in Humanitarian Logistics: A Supply approach from Agrifood Chains |
|
Poddar, Sanghamitra
Human Factors Analysis for Railway Coach and Bogie Maintenance Using AHP |
|
Poudel, Sushil
Designing a Multimodal Transportation Network under Biomass Supply Uncertainty |
|
Designing a Reliable Bio-fuel Supply Chain Network considering Link Failure Probabilities |
|
R, Ganesh Kumar
Impact of Green Supply Chain Management Attributes on Supply Chain Performance: Measurement Instrument Validity and Reliability Verification |
Top |
Rabelo, Luis
Modeling and Simulation of Berthing Processes for a Panamanian Container Terminal using BPMN and Discrete Event Simulation |
|
Raghavan, Srikant
Harnessing the Technology of Cloud Computing with Supply Chain Management |
|
Ramkumar, Janakranjan
Simulation analysis for sustainable manufacturing: A green roadmap |
|
Ratnakumar, Manohar
Impact of Magnesium Intake and Supplementation on Improving the Quality of Life in Type II Diabetes Mellitus Patients |
|
Rehman, Abdul
Composites Product and Process Quality |
|
Reimer, Don
Operational Improvement of Warehouse Operations |
|
Richards, Tanisha
Implementing a Taxonomy for the Development of a Database for a Type 2 Diabetes Mellitus Preventative Care Personalized Learning System |
|
Rojas F, Jimena
Some implications of the use of renewable energy in production scheduling |
|
Ross, Karyn
Hoshin Kanri: Harnessing the Collective Thinking of All Employees to Deploy Policies that Operationalize Strategic Goals |
|
Rothwell, Marvin
Predictive Model for Forecasting Clinical Outcomes of Rehabilitation Patients Using Advanced Technologies |
|
roushdy, maram
Investigating the Impact of Suppliers Relationship Management on Firms' Performance: A Multiple Case Study Approach on Manufacturing Companies in Egypt |
|
Ruvalcaba, Loecelia
Application of the Methodology Deflection in Humanitarian Logistics: A Supply approach from Agrifood Chains |
|
S. Abdallah, Khaled
Multi-Objective Supply Chain Network Design Under Demand Uncertainity Using Robust Goal Programming Approach |
Top |
Sadek, Yomna
Multi-Objective Supply Chain Network Design Under Demand Uncertainity Using Robust Goal Programming Approach |
|
Sadia, Rina
A System Approach Linking Quality Culture, Employee Health and Organizational Effectiveness – A Case Study |
|
Sadique, Sarder
Statistical Analysis of Sliding Resistance of Braided Glass Fiber Reinforced Composite Orthodontic Brackets and Archwires |
|
Sahay, Amar
Managing and Improving Quality- Quality Costs and Statistical Process Control |
|
Six Sigma Process Capability Analysis for Normal and Non- Normal: Methods, Measurements, Applications and Computer Analysis_ Case Studies |
|
Saini, A. K.
Business Intelligence and Analytics: Paving way for Operational Excellence, Quality and Sustainability in Indian Banks |
|
Salama, Magdy
A Statistical Approach to Estimate the Correlation between Charging Stations Availability and Plug – In Electric Vehicles Sales in Canada |
|
Salazar, Fernando
Application of the Methodology Deflection in Humanitarian Logistics: A Supply approach from Agrifood Chains |
|
Salazar, Fernando
Impact of 5S on quality, productivity and organizational climate. Two Analysis Cases |
|
Samanta, Suman
Simulation analysis for sustainable manufacturing: A green roadmap |
|
Sami uz Zaman, Muhammad
Inspection and Analysis of an Electrical Heating Element Production Facility and Validation of a Proposed Strategy to Reduce Rejections in the Line |
|
Santiago, Yaritza
Characterization of Alzheimer's disease: An Operations Research Approach |
|
Santivanez, Jose
A Risk Adverse Model for Hazardous Material Transportation |
|
Santos, Thais
A case study on the use of practical problem-solving activities to quantitatively improve physics learning in engineering education |
|
Improving the quality of engineering education: using a Pitot tube system at fluid mechanics laboratories |
|
Theoretical and Practical Integrated: Engaging Engineering Students in Fluid Mechanics Class |
|
Sawhney, Rupy
Framework of Simulation Approach to Increase Energy Efficiency |
|
Optimal Hull and Mold Storage In a Lean Boat Manufacturing |
|
Schuler, Martin
Use of Augmented Reality in Technical Documentation |
|
Use of Augmented Reality in Technical Documentation |
|
Schuler, Martin
Use of Augmented Reality in Technical Documentation |
|
Sengupta, Sankar
A SYSTEM DYNAMICS MODEL OF FLOW OF PATIENTS FROM THE ICU THROUGH THE STEP-DOWN UNITS |
|
Sequeira Morera, María Amalia
Application of the Restricted Boltzmann Machine for the planning of maintenance in databases |
|
Seraidy, Abeer
Composites Product and Process Quality |
|
shaalan, abdallah
Vendor Managed Inventory: A Case Study on Faragalla Food Industries in Egypt |
|
Vendor Managed Inventory: A Case Study on Faragalla Food Industries in Egypt |
|
Shajahan, Mohamed
X-ray Image Segmentation by using Fuzzy Index measure Combined with Principle Component Analysis |
|
Shamsuddin, Alina
Implementation of OBE in a MoT Program: Lesson Learned |
|
Reviewing the Grades, Activities and Assessment in an Engineering Technology Course with relation to the Learning Styles |
|
Sheikh, Shaya
Cuckoo Search Algorithm for Hybrid Flow Shop Scheduling Problem with Multi-layer Assembly Operations |
|
Sheikh, Shaya
Multi-Objective Non-Permutation Flowshop with Dependent Setup times and Missing Operations |
|
Sherzad, Mohammed
Style & Sustainability using precast insulated concrete for educational buildings in hot climate: case studies in UAE |
|
Silva, Marcelo Pereira da
Gaps between psychophysical demands and perceived workload – a framework for lean production system |
|
Soleimani, Faezeh
Assessing Capabilities for Innovation, The Case of Iranian Kalleh Meat Product Company |
|
Sorooshian, Shahryar
A New Performance Measurement Framework for Small and Medium Enterprises |
|
Sorooshian, Shahryar
A Performance Measurement Systems; How are they different for Malaysian SME |
|
An Environmental Impact Framework for Improving the Performance of Projects |
|
Application of Analytic Hierarchy Process Techniques in Multi-Criteria Decision Making Problems |
|
Evaluating Projects Delay Sources through '4 Ps' Framework Analysis |
|
Lean Construction Techniques: A Framework Towards Elimination of Waste in Construction Industry |
|
Stanley, Laura
A Peer-to-Peer Public Health Intervention – A Case Study in Transportation Safety |
|
Addressing the Need for Effective Communications Across the Engineering Curricula – A Case Study |
|
Usability assessment of a headrest accessory used for wheelchairs |
|
Usability assessment of an adjustable wheel-locking system for a child's wheelchair |
|
Suchar, Nathan
Improving a Particle Swarm Optimization model to solve assignment problems in an industrial environment |
|
Sullivan, Brendan
Applications for Multi Criteria Decision Making in New Product Development |
|
Sultan, Khalaf
Robust Regression Analysis Using Redescending M and MM Estimators Based on Modified Cauchy Function |
|
SUN, PENG
Hybrid column generation and large neighborhood search for the time-dependent selective PDPTW. |
|
Suratkon, Azeanita
Implementation of OBE in a MoT Program: Lesson Learned |
|
Reviewing the Grades, Activities and Assessment in an Engineering Technology Course with relation to the Learning Styles |
|
Syed, Nazishuddin Quadri
"Design and fabrication of automated loading trolley for missile and canister" |
|
Taboada, Heidi
Global Warming Potential and Cost Minimization for the Centralized Carrier Collaboration and Multi-Hub Location Problem |
Top |
Taha, Raghda
Multi-Objective Supply Chain Network Design Under Demand Uncertainity Using Robust Goal Programming Approach |
|
Taj, Shahram
Harnessing the Technology of Cloud Computing with Supply Chain Management |
|
Planning and Executing Manufacturing Facilities for Global Supply Chains |
|
Tajbakhsh, Mahdi
A case study job-shop project planning and scheduling problem |
|
Tasleem, Muhammad
Driving TQM/BE Model based Sustainable Excellence Enterprise Framework |
|
Tavakkoli-Moghaddam, Reza
A Three-Stage Approach for Solving Location-Routing Problem in Hazardous Materials Transportation |
|
Teymourian, Ehsan
Cuckoo Search Algorithm for Hybrid Flow Shop Scheduling Problem with Multi-layer Assembly Operations |
|
Multi-Objective Non-Permutation Flowshop with Dependent Setup times and Missing Operations |
|
TOBITA, Rumi
Developing an Effective ESP Course for Engineering Students integrating Analysis with NIRS |
|
Tortorella, Guilherme Luz
Application of Focus Groups and Learning Cycles on the A3 Thinking Methodology: the case of increasing machinery capacity at a steel plant |
|
Gaps between psychophysical demands and perceived workload – a framework for lean production system |
|
General Satisfaction Index (GSI) Applied to Organizational Climate Researches: a new approach focused on banking |
|
Reasons for adopting an ERP system in a public University in Southern Brazil |
|
Trikambhai Markana, Anilkumar
Improving PID Integrated Active Suspension System by using TLBO optimized parameters |
|
Truque Salto, Roberto
Traceable Petri Nets for the Supply of Multiple Production Lines with Variable Waste |
|
Tsai, Cho-Liang
Developing a Polynomial-Fourier Series Model for Building's Electricity Consumption Forecasting |
|
Tuñon, Guimara
Modeling and Simulation of Berthing Processes for a Panamanian Container Terminal using BPMN and Discrete Event Simulation |
|
Ur Rehman, Ateekh
Application of Six Sigma in Service Contracting Company |
Top |
Valles, Claudia
Global Warming Potential and Cost Minimization for the Centralized Carrier Collaboration and Multi-Hub Location Problem |
Top |
Varghese, Jaycil
Overview of Autonomous Vehicle Sensors and Systems |
|
Venegas, Ayde Yuriko
Increasing Customer Service Level in Distribution Operations |
|
Venkatadri, Uday
A case study job-shop project planning and scheduling problem |
|
Víquez Q., Ana Laura
Some implications of the use of renewable energy in production scheduling |
|
Vivaldini, Tulio
A case study on the use of practical problem-solving activities to quantitatively improve physics learning in engineering education |
|
Improving the quality of engineering education: using a Pitot tube system at fluid mechanics laboratories |
|
Theoretical and Practical Integrated: Engaging Engineering Students in Fluid Mechanics Class |
|
Wu, Chien-Wei
Developing a new variables sampling plan for products with multiple quality characteristics based on process yield |
Top |
Yang, Heejong
A SVM-based Quality Assessment using Thermal Image DATA in Sealer Dispensing Process |
Top |
yassaei, shahla
A Fuzzy Approach for Analyzing the Gap between the Desired and the Current Factors Pertaining to the Research and Development of the Iranian Nanotechnology |
|
Yedidsion, Liron
Threshold Function for the Optimal Stopping of Arithmetic Ornstein-Uhlenbeck Process |
|
Young, Kaysha
Usability assessment of a headrest accessory used for wheelchairs |
|
Usability assessment of an adjustable wheel-locking system for a child's wheelchair |
|
Youssef, Amr
Investigating the Impact of Supply Chain Practices on the Financial Performance of the Most Active Listed Firms in Egypt |
|
Zeinal Hamadani, Ali
A Bayesian Approach for Early Stage Reliability Prediction of Evolutionary Products |
Top |
Zghair, Hayder
Variety Impact Sources on the Inducible Manufacturing Complexity of the Flexible Automated Lines |
|
Zhang, Linda
Open Configuration: Framework and Definition |
|
Zou, Cui
Insights of Quality Management Concepts in the Supply Chain |
|
| |
|
| |
|
