A/Kamel, Tari
Aggregate Data Class and Materialized Views based approach for energy conservation in sensor network |
|
Abbasi, Aamna
Exploring the Possible Usage of Agile Games in Project Teams' Productivity |
|
ABD-ELRADY , Emad
Operational Process for Manufacturing a MEMS Micro-Cantilever System |
|
Abdalkadir, Niveen
Optimization of Corrosion Behaviour of Aluminium Metal Matrix Composite reinforced with nanoparticles Using Taguchi's Techniques |
|
Abdel Jawad , Asil
Hierarchical Structuring of Organizational Performance Using Interpretive Structural Modeling |
|
Abdelghfour , BOURDIM
Processing determination the default of variation of center distance according to factor of vibration imposed by the network |
|
Abdelhadi, Abdelhakim
Scheduling and Optimization of Preventive Maintenance |
|
Abdelouhab, ALOUI
Solving IFRI transportation problem: A case study |
|
Abdelrahman, Asma
Design of X-bar&R control charts for monitoring quality of care for hypertension |
|
Abdelrahman, Gasim
Design of control chart for monitoring time-between-failures of a repairable system: a case study |
|
ABDERRAZAK, SEBAA
Aggregate Data Class and Materialized Views based approach for energy conservation in sensor network |
|
Abdessettar, Saad
Gamification to stimulate engagement in Tacit Knowledge transfer : State of the art |
|
Abdollahi, Hossein
Maintenance Optimal Strategy Selection Using Quantitative-Qualitative Model and Multi Criteria Decision Making Approach |
|
Abdul Karim, Zainal Ambri
Condition-based maintenance of gas turbine based on short-Term performance prognostic |
|
Abdulla, Musaab
Economic Feasibility Study of "Battery-less" Renewable Energy (PV and Fuel Cell) System for Remote Areas in UAE via Water Electrolysis |
|
Abdulmouti, Hassan
The role of Kaizen (continuous improvements) in improving companies' performance: a case study |
|
ABHYANKAR, HEMANT
Improving Effectiveness of Teaching for Enhancing Employability of Engineering Graduates |
|
Abidi, Mustufa H.
Virtual Reality for Manufacturing - A Robotic Cell Case Study |
|
Abobaker, Ahmed
Cost Optimization of Maintenance Schedule V.S. Reliability |
|
Abosuliman, Shougi
Conceptual Modeling on Emergency Logistics, A Case Study Jeddah City, Saudi Arabia |
|
Abou Chakra, Hadi
Lean Production For a Freezing Potato Factory |
|
Abouei Ardakan, Mostafa
Multi-objective availability optimization of a system with repairable and non-repairable components |
|
Abouel nasr, Emad
Evaluation of Deadlock Control Design s in Automated Manufacturing Systems |
|
Patient Specific Mandibular Implant for Maxillofacial Surgery using Additive Manufacturing |
|
Predictive Modeling of Tumors using RP |
|
Abouelseoud, Yasmine
DUAL CYCLE MODE SCHEDULING OF INTERNAL TRANSFER IN CONTAINER TERMINALS USING A GENETIC ALGORITHM |
|
Abu-Samra, Soliman
Life-Cycle Cost Simulation and Optimization for Coastal Structures in Alexandria using Markov Chains and Genetic Algorithms |
|
Achouri, Sihem
FRACTURE BEHAVIOR AND MECHANICAL CHARACTERIZATION OF A COMPOSITE ORTHOPEDIC USE IN THE TWO DIRECTION OF FLOW MOLDING |
|
Actina, Gita
Planning and managing problems of energy and energy efficiency at regional and district level in Latvia: case study |
|
Adam, Asmaou
Rural Electrification Using a Stand-alone Photovoltaic System: Case Study of Cameroon |
|
Adenuga, Olukorede
Integration of Agent Technology into Manufacturing Enterprise: A Review and Platform for Industry 4.0 |
|
Adepu, Aamani
Production Planning Based on Demand Forecasting |
|
Adetunji, Olufemi
ECOR: A reference Model for the Management of Electoral Supply Chain Support |
|
Adeyemo, Aderemi
Fragmentable Group and Item Bin Packing with Compatibility Preferences |
|
The Bin Spreading Problem- A Novel Application of the Integer Linear Programming |
|
Adeyeri, Michael Kanisuru
Integration of Agent Technology into Manufacturing Enterprise: A Review and Platform for Industry 4.0 |
|
Modification and Performance Evaluation of Height Adjustable Paraplegic WheelChair |
|
Adjout, Moufida
Parallel Implementation of Multiple Linear Regression Algorithm Based on MapReduce |
|
A massively parallel processing for the Multiple Linear Regression |
|
Agami, Nedaa E.
Dynamic Cross Impact Analysis with Markov Chain |
|
Agarwal, Vernika
Multi-Criteria Decision Approach for a Sustainable Reverse Logistics Network under Fuzzy Environment |
|
Aggarwal, Sugandha
Optimal Control Policy to Production and Inventory System with Price-Dependent Demand in Segmented Market |
|
Optimal Control Promotional Policy for Consumer Durable Product in a Segmented Market incorporating Goodwill |
|
Aghdasi, Mohammad
Identifying the barriers of knowledge transfer in collaborative processes of public service sector: a study of tax determination process |
|
Agrama, Fatma
USING SPREADSHEETS FEATURES TO SCHEDULE NON-IDENTICAL MULTI-STOREY BUILDING PROJECTS |
|
VERSATILE MULTI-OBJECTIVE GENETIC OPTIMIZATION FOR NON-IDENTICAL MULTI- STOREY BUILDING PROJECTS |
|
Agrawal, Anil Kumar
Particle swarm optimization for natural grouping in context for Group Technology application |
|
Ahadi, Hamidreza
An integrated approach using Data Envelopment Analysis and Balanced Score Card to Supply Chain Performance Evaluation |
|
Ahmad, Ali
Virtual Reality for Manufacturing - A Robotic Cell Case Study |
|
Ahmad, Jawad
A Maximum Power Point Tracker of Photovoltaic Arrays for Partial Shading Conditions |
|
Ahmed, Payman
Effect of Pure Precipitated Micro Silica on Biological Properties of Concrete |
|
Improving Mechanical and Fatigue Characteristic of Trans-Tibial Prosthetic Socket |
|
Ahmed, Waleed
Boosting Students' Proficiency in Thermodynamics Via E-Learning |
|
Mechanical Properties of Nano-Cement Mortar: Compression and Tension |
|
Ahmed Farouk, Khaled
An Artificial Neural Network Meta Model For Availability Of Systems In Series With Buffers Under Imperfect Repair |
|
Optimum Allocations for Reliability and Maintainability for Series System with Buffers under Imperfect Repair |
|
Ahsan, Ali
Exploring the Possible Usage of Agile Games in Project Teams' Productivity |
|
Aibinu, Abiodum
Impact of Big Data Analytics to Nigerian Mobile Phone Industry |
|
Ait Kadi , Daoud
Management of Maintenance using FMEA model: Case study of Roadheaders (Alpine miners AM50) |
|
Toward a Projection model for estimation of End of Life Aircarfts |
|
AitZai, Abdelhakim
Tabu Search & GPU-based Genetic Algorithm to Solve the Job Shop Scheduling Problem with Blocking |
|
Ajami, Racha
Modeling and Simulation for Enterprise Decision-Making: Successful Projects and Approaches |
|
Akaaboune, Adil
A Hybrid SERVQUAL-ORGANIZATIONAL EFFECTIVENESS MODEL Approach for 3PL Evaluation and Selection Using AHP-DEA |
|
Defining and Modeling Cost of Risk Recovery in Supply Chain Management |
|
Akande, S.A.
On the Reducibility of Multicriteria Scheduling Problems to Bicriteria Scheduling Problem |
|
Akaydin, Oyku
Optimizing SIMT Architecture using CUDA |
|
Akbari, Mohammad
Tour scheduling for part-time employee with variable productivity |
|
Akbari, Pouria
Business Intelligence Approach to Measure Customer Profitability |
|
Akel, Kamil
Network Interdiction Problem: Literature Survey |
|
Akoushideh, Alireza
High-performance Feature Extraction Method for Texture Classification |
|
Akram, Sameeha
Reducing Steps in Robertson's Binary Multiplication Algorithm for 2^x Numbers |
|
Aksakal, Erdem
Integrated wind turbine selection model under multi-criteria decision making methods: Entropy and TOPSIS |
|
Aksakalli, Vural
A Temporal Analysis of Vessel Type Traffic in Istanbul Strait Anchorages |
|
Path Planning for Ships Using Large Adjacency Grids |
|
Al ahbabi, Hadi
IMPLEMENTATION OF TOTAL QUALITY MANAGEMENT (TQM) WITHIN THE INDUSTRY SECTOR IN THE UNITED ARAB EMIRATES |
|
Al Amoudi, Abrar Saeed
The Effect of Rooftop Garden on the Internal Temperature of Buildings |
|
The Left-Right Handed Chair Design and Optimization |
|
Al Badr, Fahad Badr M.
FINITE ELEMENT ANALYSIS OF FINGER JOINT IMPLANT: A REVIEW |
|
Al Balushi, Zainab
The State of Logistics – an overview of logistics in Oman |
|
AL Breiki, Wafa
Vendor Management System |
|
Al Darmaki, Hassan
Bulk Chemical Delivery System (BCDS) in Oil & Gas UAE Industry |
|
Al Ghafli, Ali
Economic Feasibility Study of "Battery-less" Renewable Energy (PV and Fuel Cell) System for Remote Areas in UAE via Water Electrolysis |
|
Al Hashmi, Shadha
Managing Effective Response of Humanitarian Logistics, Empirical Evidence from Oman |
|
Al Hinai, Nasr
Jobshop Scheduling for Skill-Dependent Make-to-Order System |
|
Al Jaberi, Mariam
e-Commerce Cloud: Opportunities and Challenges |
|
Al Jendi, Abdulkader
Delays in construction projects, practical approach |
|
Al Khalili, Rayya
Managing Effective Response of Humanitarian Logistics, Empirical Evidence from Oman |
|
al khawashki, Hazem
FINITE ELEMENT ANALYSIS OF FINGER JOINT IMPLANT: A REVIEW |
|
Al Kindi, mahmood
A Decision Analysis Perspectives on the Higher Education Admissions Center in Oman |
|
Challenges of Normative Decision Approach in Industries: Case Study Press Company in Oman. |
|
Al Mamari, Hamah
Managing Effective Response of Humanitarian Logistics, Empirical Evidence from Oman |
|
Al Marzouqi, Ali
Boosting Students' Proficiency in Thermodynamics Via E-Learning |
|
Al Muqaimi, Asma
Managing Effective Response of Humanitarian Logistics, Empirical Evidence from Oman |
|
Al Noman, Md Abdullah
Prospect of Renewable Energy in Bangladesh: Policy Options |
|
Al Rawahi, Ahmed
Cost Optimization of Maintenance Schedule V.S. Reliability |
|
Al Rawahi, Hani
Challenges of Normative Decision Approach in Industries: Case Study Press Company in Oman. |
|
Al Shatti, Lina Al Shatti
Investigating the Impact of Teamwork Quality on the Effectiveness of Managing Group of Multiple Projects in Oil and Gas Companies |
|
Al shehhi, Abdulla
Economic Feasibility Study of "Battery-less" Renewable Energy (PV and Fuel Cell) System for Remote Areas in UAE via Water Electrolysis |
|
Al-Adwani, Suad
Evolutionary Optimization Approaches for Direct Coupling Photovoltaic-Electrolyzer System |
|
Modeling the Mechanical Properties of Biopolymers for Automotive Applications |
|
Zonal Analysis of PHEVs/EVs Penetration: A Mean to Mitigate Vehicle Emissions |
|
Al-Ahmari, Abdulrahman
Virtual Reality for Manufacturing - A Robotic Cell Case Study |
|
Al-Ahmari, Abdulrahman M.
Evaluation of Deadlock Control Design s in Automated Manufacturing Systems |
|
FINITE ELEMENT ANALYSIS OF FINGER JOINT IMPLANT: A REVIEW |
|
Patient Specific Mandibular Implant for Maxillofacial Surgery using Additive Manufacturing |
|
Al-Alami, Alam
Implementing Product Design Development Methodology for Improving Performance of Electrical Generator |
|
Al-Ali, Mohamed
Fault Tree Analysis of Hazardous Conditions and Near Misses in a Company: A Case Application |
|
Al-Daoud, Zuhair
Optimization of excess and waste of closed loop supply chain system by using fuzzy model |
|
Al-Edaily, Arwa
A Survey of Information Technology Project Integration Models |
|
Al-Fares, Hesham
Approaches and Models for Maintenance Capacity Planning |
|
Al-Ghamdi, Khalid
Modelling Electrode Wear in an EDM Process Using Data Transformation-based Polynomial and GLM |
|
Al-Hadidi, Laith
Implementing a Reliability-centered maintenance model for a Power distribution System: A case study in Saudi Arabia |
|
Al-Hajjaj, Hazim
Datamatic Shop Floor Data Capture with message system for workforce motivation |
|
Al-Jaroodi, Jameela
Challenges of Developing UAV Applications: A Project Management View |
|
e-Commerce Cloud: Opportunities and Challenges |
|
e-Health Cloud Implementation Issues and Efforts |
|
Al-Khazraji, Kahtan
Improving Mechanical and Fatigue Characteristic of Trans-Tibial Prosthetic Socket |
|
Al-Kubaisi, Amal
Using Statistical Process Control Charts for Monitoring Birth Weight at a National Level |
|
Al-Lawati, Mujtaba
Challenges of Normative Decision Approach in Industries: Case Study Press Company in Oman. |
|
Al-Rifaie, Wail
Mechanical Properties of Nano-Cement Mortar: Compression and Tension |
|
Al-Saleh, Mohammad
Comparison of Enhanced Constructive Layout Optimization Technique with Tabu-Search and Particle Swarm Optimization Methodologies |
|
Al-Shehhi, Talal
Bulk Chemical Delivery System (BCDS) in Oil & Gas UAE Industry |
|
Al-Taha, Mohammed
Design of control chart for monitoring time-between-failures of a repairable system: a case study |
|
Al-Turki, Umer Mustafa
Developing spreadsheet models of Holt-Winter methods and solving with Microsoft Excel solver and differential evaluation technique: An application to tourism sector |
|
Al-zaabi, Asmaa
Supply Chain Resilience |
|
Alali, Jawahir
Using Statistical Process Control Charts for Monitoring Birth Weight at a National Level |
|
Alalili, Mariam
Using Statistical Process Control Charts for Monitoring Birth Weight at a National Level |
|
Alam, Mohammad Shamsul
Performance Improvement of Average Access Time by Optimization of Cache Memory Access Time |
|
Alameri, Ahmed
Economic Feasibility Study of "Battery-less" Renewable Energy (PV and Fuel Cell) System for Remote Areas in UAE via Water Electrolysis |
|
Alani, Tahseen
Roughness Enhancement of Parts Produced by Multi-Layer SPIF |
|
Albloushi, Tamador
Design of X-bar&R control charts for monitoring quality of care for hypertension |
|
Alcalá, Victor
Production Sequencing in a Fifth Wheel Industry: Case Study |
|
Alfadeil, Samah
Enhancing Sustainability Performance through Implementing Green Rating System (LEED): a Case Study |
|
Alhaag, Mohammed
A Queuing Model for Health care Pharmacy Using Software Arena |
|
Minimization of earliness & Tardiness penalties with common due dates problem using Tabu Search |
|
Alhammadi, Abrar
Enhancing Sustainability Performance through Implementing Green Rating System (LEED): a Case Study |
|
Alharkan, Ibarhim
A Queuing Model for Health care Pharmacy Using Software Arena |
|
Metaheuristics for Identical Parallel Machines Scheduling to Minimize Mean Tardiness |
|
Metaheuristics for Two-stage No-Wait Flexible Flow Shop Scheduling Problem |
|
Minimization of earliness & Tardiness penalties with common due dates problem using Tabu Search |
|
Modeling and Simulation of Queuing Systems Using Arena Software: A Case Study |
|
Alhashime, Lamees
The Effect of Rooftop Garden on the Internal Temperature of Buildings |
|
Alhazmi, Yassir
Optimal Siting For Electric Vehicle Charging Stations in Waterloo Region Using Trip Success Ratio |
|
Alhosani, Mohamed
An Economical Analysis of Residential Hybrid Solar-Wind Power Generators in Abu Dhabi |
|
Ali, Ahad
Investigation of Maintenance Assumptions for an Automotive Production line using Simulation Modeling |
|
Ali, Ahad
Operational Improvement of Warehouse Operations |
|
Ali, Ahad
Processing determination the default of variation of center distance according to factor of vibration imposed by the network |
|
Ali, Haider
Numerical analysis of two-phase bubbly flow in an industrial odor remover employing effective microorganisms solution |
|
Ali, Mohd Tarmizi
Pull System Production using Antenna Kanban - Hardware architecture of Antenna model |
|
Selection Criterion of Production Methods used in the Kanban Pull System at Malaysian Auto Suppliers |
|
Aliheidari, Tahere
Design portfolio factors motivating university employees to improve productivity using BLP and ANP Fuzzy models |
|
Aliyev, Yusif
NEW COMMUNICATION TECHNOLOGIES AND GLOBALIZATION IN THE 21st CENTURY |
|
Aljawi, lujain
The Effect of Rooftop Garden on the Internal Temperature of Buildings |
|
Aljazzaf, Zainab
TQoSM: Total Quality of Service Model |
|
Alkaff, Abdullah
The Left-Right Handed Chair Design and Optimization |
|
Alkaya, Ali Fuat
Path Planning for Ships Using Large Adjacency Grids |
|
Alkindi, Mohammed
Patient Specific Mandibular Implant for Maxillofacial Surgery using Additive Manufacturing |
|
Allahyari, Ahmad
A mixed optimization model for a multi-product advanced planning and scheduling system by considering learning effect |
|
Almasi, Fatemeh
Analyzing and Estimating the project success with a hybrid method based on fuzzy theory and decision making analysis |
|
Almonayirie, Waleed
An Application of Neuro-Logit New Modeling Tool in Corporate Financial Distress Diagnostic |
|
ALMUTAIRI, ABDULAZIZ
Generating Capacity Adequacy Evaluation Incorporating Wind Power Generation using MCMC |
|
AlNuaimi, Noura
e-Health Cloud Implementation Issues and Efforts |
|
ALQUDAH, Mohammad
Operational Process for Manufacturing a MEMS Micro-Cantilever System |
|
Alsayyed, Basel
Bulk Chemical Delivery System (BCDS) in Oil & Gas UAE Industry |
|
Cost Optimization of Maintenance Schedule V.S. Reliability |
|
Delays in construction projects, practical approach |
|
Employee Turnover, Causes, the relationship between turnover and productivity and Recommendations to reduce it |
|
Qualitative versus quantitative course assessment |
|
Review of the Power Quality Monitoring Systems for Electrical Networks |
|
Alshahrani, Salem
Implementing a Reliability-centered maintenance model for a Power distribution System: A case study in Saudi Arabia |
|
AlShamsi, Asma
e-Health Cloud Implementation Issues and Efforts |
|
Alsyouf, Imad
Design of control chart for monitoring time-between-failures of a repairable system: a case study |
|
Enhancing Sustainability Performance through Implementing Green Rating System (LEED): a Case Study |
|
Implementing Product Design Development Methodology for Improving Performance of Electrical Generator |
|
Alvaro, Jose
Robust capacity planning of a make-to-order Job Flow |
|
Alvelos, Helena
Improving Tasting Processes in the Food Industry using ICT |
|
Alwerfalli, Daw
Higher Education Institutions and Industry Collaboration |
|
Alyamani, Maha
LEED – based evaluation for submittal review during construction |
|
Alyammahi, Fatmah
Speech to Sign-Language & Sign-Language to Speech Translator |
|
Alzaben, Hesham
Recommendation for improving maintenance procedures in a Hospital by implementing Total productive Maintenance (TPM) |
|
Amadi-Echendu, Joe
Sustaining engineering logistics processes via organizational learning |
|
Amadou, COULIBALY
Metamodel product based on the coupling of the extended design matrix X-DSM and formalism SysML |
|
Amaral, Bento
Improving Tasting Processes in the Food Industry using ICT |
|
Amer, Lamis
Analysis of Quantitative Models of Horizontal Collaboration in Supply Chain Network Design: Towards "Green Collaboration" Strategies |
|
Amiri, Amirhossein
Phase II Monitoring of Correlated Simple Linear and Logistic Regression Profiles |
|
Statistical analysis of total process capability index in two-stage processes with measurement errors |
|
Andres, Herwina Richelle
LOT SIZING: OPTIMIZATION OF ECONOMIC ORDER QUANTITY |
|
Anjum, Najam
Configuration management and its implementation barriers in Public Sector Engineering Organizations of Pakistan: An Empirical Study |
|
Annamalai, Sivakumar
Analysis and Evaluation of Total and Partial Productivity using Fuzzy Optimization Technique: A Research Article as Management Perspective |
|
Aouni, Belaid
Stakeholder's Preferences Modeling in Managing Economic Sustainability |
|
Supply Chain Management through the Stochastic Goal Programming Model |
|
Araujo, Marcus Vinícius de
Solid Waste Management by Consideration of the Pollution Credit Certificates Theory |
|
Araujo, Marina Jardim Faria de
Solid Waste Management by Consideration of the Pollution Credit Certificates Theory |
|
Araujo Jr., Antonio
Product Lifecycle Management, Digital Factory and Virtual Commissioning: analysis of these concepts as a new tool of lean thinking |
|
Solid Waste Management by Consideration of the Pollution Credit Certificates Theory |
|
Arbabshirani, Behrooz
A Technology Roadmap for Energy Productivity in Iranian Steel Industry |
|
Arcelus, Francisco
Dr. Francisco Arcelus |
|
EFFICIENCY ANALYSIS OF FINANCIAL ACTORS TO ACHIEVE THE FINANCIAL INCLUSION IN COLOMBIA |
|
Hedging against uncertain supply and demand using options in a single period framework |
|
Inventory replenishment for profit maximization over a finite horizon when cost changes |
|
Ardeshirilajimi, Ardavan
Remanufacturing of commercial returns in a market with a variable quality tolerance |
|
Areejit, Suwilai
Chaotic Control for the Reactor of a Continuous Microwave Biomass Carbonization Process |
|
Arjomand, Abdosaheb
A Model to Incorporate Demand Response Programs in Security Constrained Unit Commitment |
|
Arvind, Ramesh
OUNano A novel method and framework to optimize the utilization of digital communication channel and storage resources for textual based transactions |
|
Asfaw, Elizabeth
Blended Learning for Today's Engineering Student |
|
Asghar, Ammar
Exploring the Possible Usage of Agile Games in Project Teams' Productivity |
|
Ashok Kumar, Ackshaiyaa
COOLING MATTRESS AND APNEA DETECTOR WITH STIMULATOR FOR HIE NEONATES |
|
Askri, Tarek
A production planning optimization for multi parallel machine under withdrawal right |
|
Assaf, Ramiz
An Assessment of Maintenance Management Practicies in Palestinian Industries |
|
Atashgar, Karim
Profile of knowledge analysis using regression approach: Focused on Know-How |
|
Attia, Helmi
Diagnosis of machining outcomes based on machine learning with Logical Analysis of Data |
|
Atuahene, Isaac
Production Sequencing in a Fifth Wheel Industry: Case Study |
|
Avecilla, Frenzel Paz
Set-up Time Reduction at Stamping Station 1 of Tri-R Allied Industries Incorporated |
|
Awad, Mahmoud
An Economical Analysis of Residential Hybrid Solar-Wind Power Generators in Abu Dhabi |
|
Aydogdu, Volkan
A Temporal Analysis of Vessel Type Traffic in Istanbul Strait Anchorages |
|
Ayodeji, Sesan Peter
ERGONOMIC EVALUATION OF POST MECHANICAL EFFECTS OF VIBRATION ON COMMERCIAL BUS DRIVERS |
|
Modification and Performance Evaluation of Height Adjustable Paraplegic WheelChair |
|
Ayoubi, Mona
Estimating sporadic change point in the mean of polynomial profiles |
|
Ayoubi, Mona
Phase II Monitoring of Correlated Simple Linear and Logistic Regression Profiles |
|
Ayu, Ketut
Optimum Clustering and Routing Model using CVRP Cluster-First, Route-Second in a 3PL Provider |
|
Vessel Routing Model in an Archipelago Crude Oil Distribution Problem |
|
Azad, Bijan
Exploring the Impact of Technology Adoption on E-prescribing Roles and Routines |
|
Azadeh, Ali
A Flexible Neural Network-Fuzzy Data Envelopment Analysis Approach for Location optimization of Solar Plants with Uncertainty and Complexity |
|
Azadeh, Ali
Improved Trust Prediction in Business Environments by Z-Numbers and Metrics of Maturity, Distance, and Density |
|
Performance Optimization of Electricity Distribution Units with Random Variations |
|
Azadivar, Farhad
Remanufacturing of commercial returns in a market with a variable quality tolerance |
|
Azimi, Maryam
Predictive Modeling of Tumors using RP |
|
Azimian, Alireza
Supply Chain Management through the Stochastic Goal Programming Model |
|
Aziz, Tariq
A Queuing Model for Health care Pharmacy Using Software Arena |
|
FINITE ELEMENT ANALYSIS OF FINGER JOINT IMPLANT: A REVIEW |
|
Minimization of earliness & Tardiness penalties with common due dates problem using Tabu Search |
|
Azizi, Amir
An Integrated Framework of Critical Techniques in Implementation of Total Quality Management |
|
An Integrated Model of Kano and Quality Function Deployment for Evaluation of Lean Production Tools in Assembly Environment |
|
Relationships between Total Quality Management Critical Techniques in Automotive Industry |
|
Azizmohammadi, Roozbeh
A Fuzzy Goal Programming Approach for Facility Location Problem (Case Study: Service Providers) |
|
AZZAL, Mahdia
Survival function estimation with Nonparametric Adaptive Refined Descriptive Sampling algorithm |
|
BABATUNDE JOEL, TODOWEDE
MR |
Top |
Babin, Paul
Applying Variance Performance Measures for Variable Service-Rate Queueing Simulation Models |
|
Backhouse, Chris
Building Self-Organizing Logistics Systems: Prospects for reverse logistics |
|
Backhouse, Christopher
COLLABORATIVE INVOLVEMENT IN THE NEW PRODUCT DEVELOPMENT PROCESS BETWEEN A MAJOR OEM AND ITS SUPPLIERS |
|
Bagayoko, Moussa
Forest Vehicle Routing Problem solved by New Insertion technique and meta-heuristics |
|
Baharun, Rohaizat
A Development of Satisfaction-Loyalty and Reputation Relationship Model Using Performance Measurement Approach of the Private Medical Clinics' Services |
|
Balakrishnan, Sai Shankar
Capacitive Deionization based Water Desalination System using an MPPT based Solar Charge Controller |
|
Balasubramanian, P
Evaluation of Human performance in Data Entry tasks: Effect of Time Pressure and Complexity |
|
Balazinski, Marek
Diagnosis of machining outcomes based on machine learning with Logical Analysis of Data |
|
Banwo, Olatunde
PRINCIPLES OF CONTRACT CLAIMS MANAGEMENT – A REVIEW OF THE NIGERIAN CONSTRUCTION INDUSTRY |
|
Baradaran Kazemzadeh, Reza
Estimating sporadic change point in the mean of polynomial profiles |
|
Baradaran Rahmanian, Nasir
Developing a Risk Level Determination Method for Schools in the Vicinity of Inter-City Roads |
|
Barros, Jose Glenio
Solid Waste Management by Consideration of the Pollution Credit Certificates Theory |
|
Bashir, Hamdi
A Two-Stage Decomposition Approach for the Traveling Salesman Problem |
|
Hierarchical Structuring of Organizational Performance Using Interpretive Structural Modeling |
|
Using Statistical Process Control Charts for Monitoring Birth Weight at a National Level |
|
Baskak, Murat
To define service level in an integrated model for warehouse and inventory planning by utilizing heuristic solution: An example. |
|
Batista, Rosinei
Solid Waste Management by Consideration of the Pollution Credit Certificates Theory |
|
BAYNAL, KASIM
DATA MINING APPLICATION IN BANKING SECTOR WITH CLUSTERING AND CLASSIFICATION METHODS |
|
Bazrafshan, Morteza
Identifying the barriers of knowledge transfer in collaborative processes of public service sector: a study of tax determination process |
|
Beheshti Fakher, Hossein
Integration of job sequencing with imperfect maintenance scheduling and quality inspections in a deteriorating system |
|
BEN CHEIKH, Souhir
Reconfiguring manufacturing systems using an analytic hierarchy process with strategic and operational indicators |
|
Ben Mzoughia, Mohamed
CLV model selection for segmentation perspective |
|
BEN-AYED, Omar
MULTI-MODAL PARCEL ROUTING AND SCHEDULING COMBINING FIXED AND VARIABLE TIMETABLES |
|
PARCEL ROUTING AND SCHEDULING COMBINING FIXED AND VARIABLE TIMETABLES |
|
Benattia, BLOUL
Processing determination the default of variation of center distance according to factor of vibration imposed by the network |
|
Benbrik, Abderrahmane
Buoyancy ratio effects on coupled radiation and double-diffusive convection in non-gray air-H2O mixtures |
|
BENBRIK, ABDERRAHMANE
Effect of horizontal walls emissivity on coupled double diffusive convection and non gray-gas radiation of air-H2O mixture in a cooperating case |
|
bencheriet, Chems ennahar
Faces Detection in Color Image VS Gray Scale |
|
Bendraouche, Mohamed
Scheduling with agreements: recent results |
|
Benkraouda, Ahmed
Photoelectric properties of Selenium |
|
BENMOUNAH, Amar
Markovian approach to improve the reliability and the availability of the Algerians refineries |
|
Benyekhlef, larouci
Improvement of the Influence of the Parametric Variations on the Performances of a System unified power flow controller by a Regulator based on fuzzy logic. |
|
Bernardes, Fábio
Improving the Productivity of a Packaging Line Using Lean Manufacturing Tools and Simulation |
|
Bhandari, Dila Ram
Econometric Modeling and Forecasting of Tourism in Nepal |
|
Bhardwaj, Prabhas
Particle swarm optimization for natural grouping in context for Group Technology application |
|
Bhattacharjee, Kaushik
A Binary Cuckoo Search Algorithm for Knapsack Problems |
|
Bhuiyan, Nadia
A General Framework for Lean Transformation of Hospitals |
|
Bicakci, Papatya
New Formulations for Team Orienteering Problem |
|
Bijari, Mehdi
Minimizing total weighted tardiness in single machine problem with non-identical job sizes |
|
Bin Perwez, Usama
The Impact of Globalization on Total Factor Productivity of the Manufacturing sector in Pakistan |
|
Bishu, Ram
Evaluation of Human performance in Data Entry tasks: Effect of Time Pressure and Complexity |
|
Biswas, M H A
A Mathematical Model for Understanding the Spread of Nipah Fever Epidemic in Bangladesh |
|
Blake, Roger
Supplier Competition: Theory vs. Experiment |
|
Bolivar, Holman
Making decisions in transactional costing for transportation logistic function- Horizontal Integration Strategy |
|
Bon, Abdul Talib
IMPLEMENTATION OF LEAN MANUFACTURING FOR PRODUCTIVITY IMPROVEMENT IN MALAYSIA |
|
TOTAL PRODUCTIVE MAINTENANCE IN AUTOMOTIVE INDUSTRY: ISSUES AND EFFECTIVENESS |
|
Boozary, Payam
A SURVEY ON FACTORS INFLUENCING THE USAGE OF MOBILE VALUE-ADDED SERVICES; An Empirical Investigation Among Iranian Users |
|
BOUABAZ, Mohamed
Artificial Intelligence Based approach for Daily Peak Electricity Demand Forecasting in Algeria |
|
Models Based Artificial Intelligence for Estimating the Cost of Repair and Maintenance of Buildings |
|
Boudhar, Mourad
Scheduling with agreements: recent results |
|
Tabu Search & GPU-based Genetic Algorithm to Solve the Job Shop Scheduling Problem with Blocking |
|
BOUFARES, Faouzi
Parallel Implementation of Multiple Linear Regression Algorithm Based on MapReduce |
|
Bouhouche, Salah
FRACTURE BEHAVIOR AND MECHANICAL CHARACTERIZATION OF A COMPOSITE ORTHOPEDIC USE IN THE TWO DIRECTION OF FLOW MOLDING |
|
Modeling of temperature field at outlet of continuous casting mold |
|
Boukredera, Djamila
An AHP-Based Evaluation Method to Enhance Consensus in Agent-Mediated Negotiations on Multiple Issues with Incomplete Information |
|
Boulaksil, Youssef
Small traditional retailers in emerging markets |
|
Boulkroune, Soufiene
Modeling of temperature field at outlet of continuous casting mold |
|
Bourareche, Mouloud
Fuzzy Modelling of Uncertain Data in the Layers Of Protection Analysis |
|
Implementing BORA in Oil and Gas Process, Case Study:Algerian Industry |
|
Bourebia, Mounira
FRACTURE BEHAVIOR AND MECHANICAL CHARACTERIZATION OF A COMPOSITE ORTHOPEDIC USE IN THE TWO DIRECTION OF FLOW MOLDING |
|
Modeling of temperature field at outlet of continuous casting mold |
|
BOYACI, AHMET
DATA MINING APPLICATION IN BANKING SECTOR WITH CLUSTERING AND CLASSIFICATION METHODS |
|
Braxton , Saundra
Blended Learning for Today's Engineering Student |
|
Broekmeulen, Rob
Exact Expressions for the Periodic Review Inventory System with Stochastic Demand and Ordering in Integer Multiples of a Base Lot Size |
|
Brown, Gregory
NURSE-PHYSICIAN RATIO IN AN INTERNAL MEDICINE RESIDENCY CLINIC |
|
Burdess, Jim
Operational Process for Manufacturing a MEMS Micro-Cantilever System |
|
Byri, Anupam
Operational Improvement of Warehouse Operations |
|
Caballero-Morales, Santiago-Omar
Analyzing the Effect of Non-normality on the Solution Space for the Economic Statistical Design of X-bar Control Charts |
Top |
Cabral, Izunildo
Analyzing the Impact of Business Interoperability on the Performance of Cooperative Supply Chain Networks |
|
Caldwell, Eldon
GTBM: An alternative theoretical model to Drum Buffer Rope System Evaluation |
|
Caldwell, Eldon
Understanding disability in the labor dimension: unresolved debates that influence exclusionary practices |
|
ÇALIŞ, ASLI
DATA MINING APPLICATION IN BANKING SECTOR WITH CLUSTERING AND CLASSIFICATION METHODS |
Top |
Capa, Canan
Proactive Project Scheduling in an R&D Department: A Bi-Objective Genetic Algorithm |
Top |
Carlos, Ma. Cecilia
Facility Layout Improvement Model Using Ergonomics and Layout Simulation |
|
Castillo Perez, Felipe
Consistent Conjectural Variations Equilibrium in a Human Migration Model |
|
Consistent Conjectural Variations Equilibrium in a Human Migration Model |
|
Cauley, Fattaneh
Real Time Solutions for Scheduling a Satellite Downlink: A Constrained Minimization Problem |
|
Chaharsoughi, Seyed Kamal
A Genetic and Iterative Local Search Algorithm for solving Subgraph Isomorphism Problem |
|
Selecting warehouse location by means of the balancing and ranking method with an interval approach |
|
Chan, CHEE-MING
Geo-disasters in Relation with Climate Change: Student's Perspective via a Course-embedded Project |
|
Chan, Felix
Scheduling of Multi-Die Operations with Multiple Maintenance Tasks |
|
The impact of non-stationary demand and forecasting on a failure-prone manufacturing system |
|
Chandrakumar, Chanjief
Detrimental effects of poor Human Resources Management: Case study from Sri Lanka |
|
Technological Needs Assessment of Traditional Brass Industry to Enhance the Productivity |
|
Chandrakumar, Chanthujan
Detrimental effects of poor Human Resources Management: Case study from Sri Lanka |
|
chaour, mouhamed
Modeling of temperature field at outlet of continuous casting mold |
|
Chari, Navin
A Two-Phase Optimization Approach to Recyclable Product Collection using Compaction Trailers |
|
Charoenpornpattana, Santi
Factor Affecting Construction Labor Productivity in Thailand |
|
Chaudhary, Kuldeep
Multi-Criteria Decision Approach for a Sustainable Reverse Logistics Network under Fuzzy Environment |
|
Optimal Control Policy to Production and Inventory System with Price-Dependent Demand in Segmented Market |
|
Optimal Control Promotional Policy for Consumer Durable Product in a Segmented Market incorporating Goodwill |
|
Cheaitou, Ali
Green Supplier Selection and Order Allocation Using an Integrated Fuzzy TOPSIS, AHP and IP Approach |
|
Chen, Chien-Ming
Simulation optimization with GA and OCBA for semiconductor back-end assembly scheduling |
|
Chen, Jen-Ming
Revenue Management for Durable Goods using Trade-ins with Certified Pre-own Options |
|
Chen, Wei-Ting
Applying green manufacturing model to build sustainable competitiveness |
|
Chen, Xiaoyu
Defining open configuration |
|
Chen, Yun-Shiow
New Application of Process Mining to Identify Abnormality in Statistical Process Control Process |
|
CHERIFI, Ahmed
The golden rules for ecoinnovative design by using the TRIZ theory |
|
CHERIFI, MOHAMMED
Buoyancy ratio effects on coupled radiation and double-diffusive convection in non-gray air-H2O mixtures |
|
Effect of horizontal walls emissivity on coupled double diffusive convection and non gray-gas radiation of air-H2O mixture in a cooperating case |
|
Chestnut , Jacqueline
Blended Learning for Today's Engineering Student |
|
CHINGONO, TATENDA TALENT
The impact of biodiesel production on land use change in South Africa |
|
Chinien, Soogambal
Emotional Intelligence in COCOMO II for Software Cost Estimation |
|
Chiu, Chun-Chih
Airport Baggage Handling System Simulation Modeling Using SysML |
|
Choe, SangYun
Relieving electric power dependency during shortage with an on-site solar power supply |
|
CHONG, ZHENG ZIAO
Numerical Assessment on Makespan Minimization by Adopting NEH Heuristics in Permutation Flow Shop |
|
Chou, Pei-Wen
Analysis of the Optimal Combination of Renewable Energies for an Enterprise |
|
Chung, S.H.
The impact of non-stationary demand and forecasting on a failure-prone manufacturing system |
|
Chung, Yun-Kung
New Application of Process Mining to Identify Abnormality in Statistical Process Control Process |
|
Chuttur, Mohammad
Emotional Intelligence in COCOMO II for Software Cost Estimation |
|
Ciemleja , Guna
Practical evaluation of multifunctional nanocoatings technology commercialization in Latvia |
|
Ciobotaru, Oana
Co-Utility: Self-Enforcing Protocols Without Coordination Mechanisms |
|
Ciocia, Alessandro
A Maximum Power Point Tracker of Photovoltaic Arrays for Partial Shading Conditions |
|
Collazos, Angelica Burbano
Integrating Supply Chain Data Standards in Healthcare Operations and Electronic Health Records |
|
Componation, Paul
Biofuel Production: Fast Pyrolysis Units' Manufacturing Infrastructure |
|
Cook, Karissa
Procurement Management and Construction Methods for the Installation of Pavement Monitoring Systems in Airport Pavements |
|
CORTES-ALDANA, FELIX
Certification of Professional Engineering in Colombia: From the multi-criteria analysis approach and innovation |
|
Costa, Fabrício
Computational Tool to Setup Time Reduction - An Hamiltonian Path Analysis to Production Sequencing. |
|
System to generate the operator productivity index inside production cell to improve the production process efficiency. |
|
Costa, Nuno
A novel approach to improve COP efficiency |
|
Covarrubias, Daniel
Production Sequencing in a Fifth Wheel Industry: Case Study |
|
CUNIAH, Canayah
Computer Programming difficulties at Higher Secondary School: A Content Analysis |
|
D, Senthilkumar
Prediction of Low Birth Weight Infants and Its Risk Factors Using Data Mining Techniques |
Top |
Dabah, Adel
Tabu Search & GPU-based Genetic Algorithm to Solve the Job Shop Scheduling Problem with Blocking |
|
Dagdeviren, Metin
Integrated wind turbine selection model under multi-criteria decision making methods: Entropy and TOPSIS |
|
Dahmani, Abdelnasser
A different way to compute RDS estimate |
|
Dahunsi, Olurotimi
ERGONOMIC EVALUATION OF POST MECHANICAL EFFECTS OF VIBRATION ON COMMERCIAL BUS DRIVERS |
|
Dallasega, Patrick
Increasing productivity in ETO construction projects through a lean methodology for demand predictability |
|
Mobile On-site Factories – scalable and distributed manufacturing systems for the construction industry |
|
DANTHAKANI, Ravichandran
Operational Process for Manufacturing a MEMS Micro-Cantilever System |
|
DAO, THIEN MY
Forest Vehicle Routing Problem solved by New Insertion technique and meta-heuristics |
|
Darbari, Jyoti
Multi-Criteria Decision Approach for a Sustainable Reverse Logistics Network under Fuzzy Environment |
|
Darmawan, Armin
Design Multi-echelon Supply Chain Network Considering Disruption Risk |
|
DARMOUL, Saber
Reconfiguring manufacturing systems using an analytic hierarchy process with strategic and operational indicators |
|
Virtual Reality for Manufacturing - A Robotic Cell Case Study |
|
Darwish, Saied M
FINITE ELEMENT ANALYSIS OF FINGER JOINT IMPLANT: A REVIEW |
|
Dashi, Bashayer
A System with Multi-Failure Mode and Imperfect Repair |
|
Davis, Dorian
Usability Evaluation of Web-Based Interfaces for Type2 Diabetes Mellitus |
|
Delgado, Jocelyn
Facility Layout Improvement Model Using Ergonomics and Layout Simulation |
|
Delgado, Rosa
Understanding disability in the labor dimension: unresolved debates that influence exclusionary practices |
|
Delghan, Hamsa
the impact of production scheduling policies and buffer zone size in process synchronization an application in the primary aluminum industry |
|
Dellagi, sofiene
Production/Maintenance Optimization problem with random repair time |
|
Demirel, Ömer Fahrettin
Developing spreadsheet models of Holt-Winter methods and solving with Microsoft Excel solver and differential evaluation technique: An application to tourism sector |
|
Demirli, Kudret
A General Framework for Lean Transformation of Hospitals |
|
Derya, Tusan
New Formulations for Team Orienteering Problem |
|
Deshmukh, S G
Just in Time Implementation Issues in Indian Corrugated Packaging Industries |
|
Dhafer, Abdullah
The application of 5S methodology into plant maintenance KPIs |
|
Dharmapriya, Subodha
Design a Mathematical Model for Performance Evaluation of Cluster of Manufacturing Plant |
|
Dharmawardhana, Mahanama
Technological Needs Assessment of Traditional Brass Industry to Enhance the Productivity |
|
Diallo, Claver
A Two-Phase Optimization Approach to Recyclable Product Collection using Compaction Trailers |
|
Dickson, Alex
A Novel Application of System Survival Signature in Supply Chain Risk Management |
|
Supply Chain Risk Management: Systematic literature review and a conceptual framework for capturing interdependencies between risks |
|
Disney, Stephen
Dynamics of Closed Loop Supply Chains |
|
Divece, Carla
Reducing Inbound Transportation Costs: An Application |
|
Djamal, Berdjane
FRACTURE BEHAVIOR AND MECHANICAL CHARACTERIZATION OF A COMPOSITE ORTHOPEDIC USE IN THE TWO DIRECTION OF FLOW MOLDING |
|
Djamil, Aissani
Performance evaluation of IP-Ad Hoc gateways |
|
Domingo-Ferrer, Josep
Co-Utility: Self-Enforcing Protocols Without Coordination Mechanisms |
|
Donselaar, Karel
Exact Expressions for the Periodic Review Inventory System with Stochastic Demand and Ordering in Integer Multiples of a Base Lot Size |
|
Doshi, Hardik
Detection of Fracture in Skull by Hit-or-Miss Transformation |
|
Dubey, Ramu
DUALITY FOR A NONDIFFERENTIBLE MULTIOBJECTIVE FRACTIONAL PROGRAMMING PROBLEM USING G-INVEXITY |
|
Duffuaa, Salih
Approaches and Models for Maintenance Capacity Planning |
|
Dweiri, Fikri
Using Statistical Process Control Charts for Monitoring Birth Weight at a National Level |
|
EASWARAMOORTHI, M
STRATEGIES FOR SUSTAINABLE ASSEMBLY LINE DESIGN WITH LEAN AND ERGONOMICS PERSPECTIVE |
Top |
Ebrahim, Zuhriah
Fit Manufacturing: Production Waste Index and Its Effect to Production Profitability |
|
Ejim-Eze, Emmanuel
Sustaining engineering logistics processes via organizational learning |
|
Ekanayake, Risheeka
Technological Needs Assessment of Traditional Brass Industry to Enhance the Productivity |
|
El Barky, Sahar
A Green Supply Chain Management Migration Model Based on Challenges Faced in Egypt |
|
EL Hachem, Wissam
Mental Model Moderation, Modification and Managing (5M) framework, a System Dynamics and Brunswikian Lens Model approach to Complex Decision Making |
|
El Haj Assad, M.
Exergy Analysis of Reactive Combustion Processes in Gas Heaters |
|
Heat Losses from Human Body in Weather Condition of Amman City |
|
Neural Network Usage in Structural Crack Detection |
|
El Hakea, Ayman
Life-Cycle Cost Simulation and Optimization for Coastal Structures in Alexandria using Markov Chains and Genetic Algorithms |
|
El Shaer, Mohamed
Photoelectric properties of Selenium |
|
El Zarka, Sara
A Green Supply Chain Management Migration Model Based on Challenges Faced in Egypt |
|
El-Tamimi, Abdulaziz
Evaluation of Deadlock Control Design s in Automated Manufacturing Systems |
|
Elahi, Seyed Ehsan
Supplier Competition: Theory vs. Experiment |
|
Elbadrawy, Rehab
E-waste Reverse logistic Optimization in Egypt |
|
Eliyan, Afnan
the impact of production scheduling policies and buffer zone size in process synchronization an application in the primary aluminum industry |
|
ElKamel, Ali
Design and Analysis of a Simulated Methanol Production Plant |
|
Design and Optimization of a Biogas Digester for a Net-Zero Energy Community in Southwestern Ontario |
|
Evolutionary Optimization Approaches for Direct Coupling Photovoltaic-Electrolyzer System |
|
Modeling the Mechanical Properties of Biopolymers for Automotive Applications |
|
Zonal Analysis of PHEVs/EVs Penetration: A Mean to Mitigate Vehicle Emissions |
|
Elkhweldi, Mansour
Aviation Risk Management Strategies: Case Study |
|
Elmabrouk, Saber
Aviation Risk Management Strategies: Case Study |
|
Practical Risk Management Plan of Wi-Fi Network Deployment; Case Study |
|
Elmhedwi, Tawfik
Practical Risk Management Plan of Wi-Fi Network Deployment; Case Study |
|
Elnaggar, Ghada
DUAL CYCLE MODE SCHEDULING OF INTERNAL TRANSFER IN CONTAINER TERMINALS USING A GENETIC ALGORITHM |
|
ElSheikh Saroor, Hoda
Review of the Power Quality Monitoring Systems for Electrical Networks |
|
Eltawil, Amr
Analysis of Quantitative Models of Horizontal Collaboration in Supply Chain Network Design: Towards "Green Collaboration" Strategies |
|
Modeling and Analysis of Workforce Management Decisions in Modern Call Centers |
|
The Production-Inventory-Distribution-Routing Problem: An integrated formulation and solution framework |
|
ERBIYIK, Hikmet
To define service level in an integrated model for warehouse and inventory planning by utilizing heuristic solution: An example. |
|
Erdil, Nadiye
Production Planning Based on Demand Forecasting |
|
Escandón Quintanilla, Ma Lorena
Opportunities to exploit Big data in idea generation sessions |
|
Esfidani, Mohamad Taghi
Exergy Analysis of Reactive Combustion Processes in Gas Heaters |
|
Eskandri, Sepide
Investigating the effect of human factors on warranty cost under sales delay conditions |
|
Eslamipour, Mohammad
Application of Six Sigma in manufacturing of power plant Projects |
|
Esmaeilian, Gholamreza
Binary integer formulation for Mixed- Model U-Line Assembly Line with the Approach of Dual Resource Constrained |
|
Functional and Distributed Layouts and their Effectiveness on Capability-Based Virtual Cellular Manufacturing Systems Performance |
|
Multi-objective balancing of Parallel Mixed-Model assembly lines by Considering Machine and Worker Constraints |
|
Estember, Rene
The Musculoskeletal Disorder Effects on the Use of Single and Dual Monitor Workstations |
|
Faezy Razi, Farshad
A hybrid Grey-based KOHONEN and Multi-Objective Genetic Algorithm to robot selection |
Top |
Fahimnia, Behnam
Is a green supply chain network resilient to disruptions? |
|
Falade, Funso
Engineering Research: A Tool for Development of Manufacturing Industry in Developing Countries - A Case Study in Nigeria |
|
Fameronag, Jannine
Set-up Time Reduction at Stamping Station 1 of Tri-R Allied Industries Incorporated |
|
Farahani, Mina
A Genetic and Iterative Local Search Algorithm for solving Subgraph Isomorphism Problem |
|
Fardoun, Abbas
Economic Feasibility Study of "Battery-less" Renewable Energy (PV and Fuel Cell) System for Remote Areas in UAE via Water Electrolysis |
|
Fatima, Noshin
Effect of humidity and temperature on organic semiconductor CuPc films deposited at different gravity conditions |
|
Fawzy, Mostafa
Biofuel Production: Fast Pyrolysis Units' Manufacturing Infrastructure |
|
Fayad, Ramzi
Lean Production For a Freezing Potato Factory |
|
Fazeli Veysari, Samira
A Technology Roadmap for Energy Productivity in Iranian Steel Industry |
|
Fernandes, Sally Eona
Reducing Aflatoxin Failures in Chilli across the Value Chain |
|
FERNANDEZ LEDESMA, JAVIER D.
Optimization model for the dairy sector |
|
Ferraz, Leandro
Computational Tool to Setup Time Reduction - An Hamiltonian Path Analysis to Production Sequencing. |
|
Ferreira, Fernanda A.
Government preference, environmental taxes and privatization |
|
Privatization and social welfare in an international mixed Stackelberg duopoly |
|
Ferreira, Flavio
Government preference, environmental taxes and privatization |
|
Privatization and social welfare in an international mixed Stackelberg duopoly |
|
Ferreira, José Vasconcelos
Improving the Productivity of a Packaging Line Using Lean Manufacturing Tools and Simulation |
|
The Crew Rostering Problem at Urban Mass Transit Companies: The Assignment of Crews without Predefined Work |
|
Firdaus, Ricky
ANALYSIS OF MESOERGONOMIC AT LOGISTIC PROCESS OF BOTTLED DRINKING WATER |
|
Firouzi Jahantigh, Farzad
providing a model for customer satisfaction rankings in the telecommunications industry |
|
An integrated approach forranking strategic objectives of balanced scorecard |
|
Firouzi Jahantigh, Farzad
Development of a supply chain model for healthcare industry |
|
Firouzi Jahantigh, Farzad
Kidney Diseases Diagnosis by Using Fuzzy Logich |
|
Solving the no-wait flow shop problem with due date constraints |
|
Fitsilis, Panos
A Fuzzy Linguistic Approach for Human Resource Evaluation and Selection in Software Projects |
|
Florent, Lado Nogning
Performance Double Prism: a performance measurement system for exploration and exploitation innovations in manufacturing SMEs |
|
Fors, M. Nashat
A New Approach for Combining Multi-Criteria Trading Decision Models |
|
An Artificial Neural Network Meta Model For Availability Of Systems In Series With Buffers Under Imperfect Repair |
|
DUAL CYCLE MODE SCHEDULING OF INTERNAL TRANSFER IN CONTAINER TERMINALS USING A GENETIC ALGORITHM |
|
E-waste Reverse logistic Optimization in Egypt |
|
Exclusion of Risky Values of Trading Models Parameters in Investment Decisions |
|
Optimum Allocations for Reliability and Maintainability for Series System with Buffers under Imperfect Repair |
|
Frini, Anissa
A TOPSIS multi-criteria multi-period approach for selecting projects in sustainable development context |
|
Fu, Yen-Chen
Applications of production and delivery concept to vendor-buyer coordination problem |
|
Fujimura, Shigeru
A Novel Spiral-evolutional Construction Approach for Production Scheduling Systems |
|
Gadallah, Tarek
A New Approach for Combining Multi-Criteria Trading Decision Models |
Top |
Exclusion of Risky Values of Trading Models Parameters in Investment Decisions |
|
Gaith, Mohamed
Exergy Analysis of Reactive Combustion Processes in Gas Heaters |
|
Heat Losses from Human Body in Weather Condition of Amman City |
|
Neural Network Usage in Structural Crack Detection |
|
Galal, Noha
Rural Electrification Using a Stand-alone Photovoltaic System: Case Study of Cameroon |
|
Galil, Omar
A Recommended Approach to Improve Utilization of Local Workforce in the Middle East Megaprojects |
|
Ganapathy, L
Optimization Modeling for Production, Inventory and Distribution of Perishable Items: A Review |
|
Ganti, Ram Subhash
Implementing Lean Six Sigma to improve the ratio of admissions to placements in an academic year: Statistical and Psychological case study of a technical institute. |
|
Automating Field Motor and Irrigating Systems for better crop yield |
|
Garbie, Ibrahim
Investigation of Sustainability Index in Omani Manufacturing Firms: Evidence from Industrial Company |
|
Garcia, João
A novel approach to improve COP efficiency |
|
Gardoni, Mickael
Gamification to stimulate engagement in Tacit Knowledge transfer : State of the art |
|
Metamodel product based on the coupling of the extended design matrix X-DSM and formalism SysML |
|
Opportunities to exploit Big data in idea generation sessions |
|
Performance Double Prism: a performance measurement system for exploration and exploitation innovations in manufacturing SMEs |
|
The golden rules for ecoinnovative design by using the TRIZ theory |
|
Using Process Modelling and Simulation for Setting Quality Gates in Complex Product Development Processes |
|
Garg, Suresh
Just in Time Implementation Issues in Indian Corrugated Packaging Industries |
|
Garza-Reyes, Jose Arturo
Adoption of Operations Improvement Methods in the Greek Engineering Sector |
|
Corporate Sustainability and Business Excellence |
|
Garzafox, Lorena
A Scheme to Achieve Distribution Agility |
|
Gashgari, Raneem
The Effect of Rooftop Garden on the Internal Temperature of Buildings |
|
Gatdula, Alfredo
Set-up Time Reduction at Stamping Station 1 of Tri-R Allied Industries Incorporated |
|
Gavirneni, Nagesh
Dynamics of Closed Loop Supply Chains |
|
Geddadi, Rajashekar
Operational Improvement of Warehouse Operations |
|
Geipele, Ineta
Practical aspects of sustainable construction in Latvia |
|
Construction management - challenges, influencing factors and importance of investment climate |
|
Influence of Development of National Economy on the Construction Business |
|
Planning and managing problems of energy and energy efficiency at regional and district level in Latvia: case study |
|
Practical evaluation of multifunctional nanocoatings technology commercialization in Latvia |
|
Gellad, Ziad
NURSE-PHYSICIAN RATIO IN AN INTERNAL MEDICINE RESIDENCY CLINIC |
|
Gencer, Cevriye
A Fuzzy Integral Approach for Determining the Degree of Effect of the Global Warming on the Cities of Turkey |
|
Network Interdiction Problem: Literature Survey |
|
Gerogiannis, Vassilis
A Fuzzy Linguistic Approach for Human Resource Evaluation and Selection in Software Projects |
|
Ghahramany Baranghar, Ali
A mixed optimization model for a multi-product advanced planning and scheduling system by considering learning effect |
|
Ghaleb, Atef
Metaheuristics for Identical Parallel Machines Scheduling to Minimize Mean Tardiness |
|
Ghaleb, Mageed
Metaheuristics for Identical Parallel Machines Scheduling to Minimize Mean Tardiness |
|
Metaheuristics for Two-stage No-Wait Flexible Flow Shop Scheduling Problem |
|
Modeling and Simulation of Queuing Systems Using Arena Software: A Case Study |
|
Ghanbarian, Farzaneh
Multi-objective balancing of Parallel Mixed-Model assembly lines by Considering Machine and Worker Constraints |
|
Ghani, Mohd Khairolden Ghani
The Evaluation of Performance Criteria for Healthcare Facilities Services in Malaysia |
|
Ghanmi, Ahmed
Sensitivity Analysis of Bid Evaluation Plans for Defence Acquisition Problems |
|
Ghasemi, Alireza
Optimal Replacement using Logical Analysis of Data (LAD) and Dynamic Programming |
|
Ghasemi, Farhad
The analysis of critical factors of success (failure) for Iran nanotechnology research & development via fuzzy map approachFuzzy mapping |
|
Ghosh, Arindam
Optimal production-inventory policy under strict carbon cap in a supply chain with backorders and lost sales |
|
Godilano, Ezrha
Innovative Ergonomic Design of a Tricycle and Risk Assessment |
|
Goh, Shao Hung
Incorporating Postponement in an Offshoring Strategy - A case study of a Singapore-China cross border manufacturing supply chain |
|
Gök, Mehmet Sahin
Comparative Analysis of Environmental Performance in G8 and G20 Countries |
|
Gomez-Pantoja, Jose Alvaro
Consistent Conjectural Variations Equilibrium in a Human Migration Model |
|
Goodarzi, Maryam
A Framework for Strategy Development in Small Companies The Case Study of a Telecommunication firm |
|
Gor, Ravi
Hedging against uncertain supply and demand using options in a single period framework |
|
Görener, Rifat
Developing spreadsheet models of Holt-Winter methods and solving with Microsoft Excel solver and differential evaluation technique: An application to tourism sector |
|
GOVINDASAMY, GOPU
COOLING MATTRESS AND APNEA DETECTOR WITH STIMULATOR FOR HIE NEONATES |
|
Greenwood, Allen
Applying Variance Performance Measures for Variable Service-Rate Queueing Simulation Models |
|
Grilo, Antonio
Analyzing the Impact of Business Interoperability on the Performance of Cooperative Supply Chain Networks |
|
Gruber, Jared
Simulation Helps Local Grocery Store Compete Effectively Against Large Chains |
|
Gudukeya, Loice
A SMALL HYDRO POWER PLANT AT TSANGA RIVER (NYANGA) TO FEED INTO A GRID |
|
FLEXIBLE MANUFACTURING SYSTEM: A REMEDY FOR IMPROVING PRODUCTIVITY IN ZIMBABWE MANUFACTURING INDUSTRY |
|
Life cycle Assessment of Steel balls: Case study – Craster International |
|
Guerra, Ivonne
Reducing Operating Costs by Integrating a Food Supply System |
|
Guha, Radha
Implementation of Kalman Filter and Sonar Image Processing on FPGA platform |
|
Guha Thakurta, Arundhati
COMPARATIVE ANALYSIS OF GAIT KINEMATICS OF MALE AND FEMALE CONSTRUCTION WORKERS WHILE CARRYING ASSYMETRIC LOADS IN DIFFERENT MODES |
|
GUPTA, PARDEEP
Study of Success Factors of TPM Implementation in Indian Industry towards Operational Excellence: An Overview |
|
The Impact of Quality Mantenance Pillar of TPM on Manufacturing Performance of a Process Industry. |
|
Gupta, S. K.
DUALITY FOR A NONDIFFERENTIBLE MULTIOBJECTIVE FRACTIONAL PROGRAMMING PROBLEM USING G-INVEXITY |
|
Habib, Md. Mamun
A Research Framework of Supply Chain Management in Apparel Industry: Bangladesh Perspective |
Top |
Hachicha, Mondher
MULTI-MODAL PARCEL ROUTING AND SCHEDULING COMBINING FIXED AND VARIABLE TIMETABLES |
|
PARCEL ROUTING AND SCHEDULING COMBINING FIXED AND VARIABLE TIMETABLES |
|
Haddad, Marc
Unsustainability in emergent systems: a case study of road transport in Greater Beirut Area. |
|
Haddad, Tamer
An Assessment of Maintenance Management Practicies in Palestinian Industries |
|
Hadipour, Hassan
A Fuzzy Goal Programming Approach for Facility Location Problem (Case Study: Service Providers) |
|
Hadj, Mimoun
optimization of the concentration of lubricating oil additives of gasoline engines |
|
Hajeeh, Mohammed
A System with Multi-Failure Mode and Imperfect Repair |
|
Hajihashemi, Shiva
Developing a Risk Level Determination Method for Schools in the Vicinity of Inter-City Roads |
|
HAJRI-GABOUJ, Sonia
Reconfiguring manufacturing systems using an analytic hierarchy process with strategic and operational indicators |
|
Hamad, Mostafa
Rural Electrification Using a Stand-alone Photovoltaic System: Case Study of Cameroon |
|
Hamdan , Basma
A Two-Stage Decomposition Approach for the Traveling Salesman Problem |
|
Hamdan, sadeque
Green Supplier Selection and Order Allocation Using an Integrated Fuzzy TOPSIS, AHP and IP Approach |
|
hamedi, maryam
Binary integer formulation for Mixed- Model U-Line Assembly Line with the Approach of Dual Resource Constrained |
|
Functional and Distributed Layouts and their Effectiveness on Capability-Based Virtual Cellular Manufacturing Systems Performance |
|
Multi-objective balancing of Parallel Mixed-Model assembly lines by Considering Machine and Worker Constraints |
|
Hamid, Zuhairi Abd Hamid
The Evaluation of Performance Criteria for Healthcare Facilities Services in Malaysia |
|
HAMRI, Hassan
Management of Maintenance using FMEA model: Case study of Roadheaders (Alpine miners AM50) |
|
Harding, J.A.
Product-Service System in Inventory Control: A new paradigm? |
|
Hariche, Kamal
An AHP-Based Evaluation Method to Enhance Consensus in Agent-Mediated Negotiations on Multiple Issues with Incomplete Information |
|
Harik, Ramy
Mental Model Moderation, Modification and Managing (5M) framework, a System Dynamics and Brunswikian Lens Model approach to Complex Decision Making |
|
HARRIS , Alun
Operational Process for Manufacturing a MEMS Micro-Cantilever System |
|
Hasan, Musaab
Speech to Sign-Language & Sign-Language to Speech Translator |
|
Hassan, Hisham
Photoelectric properties of Selenium |
|
Hassanin , Ahmed
Comparison of Enhanced Constructive Layout Optimization Technique with Tabu-Search and Particle Swarm Optimization Methodologies |
|
Hejaaji, Adel
Missing Link between Agility Models and Manufacturing SMEs |
|
Helo, Petri
Collaborative Processes within Virtual Manufacturing Business Networks: How SMEs can be benefited? |
|
Hempel, Harald
Smart City Logistik Erfurt (SCL): ICT Support for managing Fully Electric Vehicles in the Domain of inner City Freight Traffic |
|
Hening, Dyah
Important Soft Skills for Engineers to Succeed in a Working Environment |
|
Herath, Sujith Anuruddha
Technological Needs Assessment of Traditional Brass Industry to Enhance the Productivity |
|
Heydarova, Jale
NEW COMMUNICATION TECHNOLOGIES AND GLOBALIZATION IN THE 21st CENTURY |
|
Hisarciklilar, Onur
Using Process Modelling and Simulation for Setting Quality Gates in Complex Product Development Processes |
|
Hittini, Waseem
Cost Optimization of Maintenance Schedule V.S. Reliability |
|
Ho, Hwi Chie
Pursuing the quality of driving through an understanding of job security, job satisfaction, and perceived safety as antecedents of motorcycling behaviors in Jakarta, Indonesia |
|
HOCINE, ABDERREZZAK
Determination of insulation active component of an insulated neutral electrical supply network |
|
Hosoda, Takamichi
Dynamics of Closed Loop Supply Chains |
|
Hsu, Yu-Ting
Revenue Management for Durable Goods using Trade-ins with Certified Pre-own Options |
|
Huang, Boray
A Stochastic Approach to Appointment Sequencing |
|
Huang, Edward
Airport Baggage Handling System Simulation Modeling Using SysML |
|
Huang, Wenpo
Design of CUSUM Charts with Probability Control Limits |
|
Hussain, Ishtiaq
Designed Experiment to Find the Optimal Combination of the Factors for the Coordinate Measuring Machine (CMM) to Measure Cylindricity of Engine Cylinder Bore |
|
Ibrahim, Ihfasuziella Ibrahim
The Evaluation of Performance Criteria for Healthcare Facilities Services in Malaysia |
Top |
ibrahim, rosziati
Diacritics of Arabic Natural Language Processing (ANLP) and its Quality Assessment |
|
Idries, Ahmed
Challenges of Developing UAV Applications: A Project Management View |
|
Ikheneche, Nacera
Minimization of a quadratic program with hybrid direction |
|
Islam, Jawaid
The Impact of Employee Satisfaction and Service Quality on Perceived Firm's Performance in High Contact Service Industry |
|
Ismail, Siti Zubaidah Binti
Product-Service System in Inventory Control: A new paradigm? |
|
Ismaila, Olasunkanmi
Determination of Safe Mass of Backpack for Students in Tertiary Institutions |
|
Determination of Safe Weight Limit of Sandcrete Block for Block Moulders |
|
Jaaron, Ayham
Building Self-Organizing Logistics Systems: Prospects for reverse logistics |
Top |
Jadidi, Mohsen
Implementing Data Envelopment Analysis(DEA) Methodology to Prioritize Wind Turbine Locations for Sistan-Baluchistan, Iran |
|
Jafari, Arezoo
Minimizing the number of tardy jobs in a dynamic flexible flow shop |
|
Jaffar, Ahmed
Pull System Production using Antenna Kanban - Hardware architecture of Antenna model |
|
Selection Criterion of Production Methods used in the Kanban Pull System at Malaysian Auto Suppliers |
|
Jahmeerbacus, Iqbal
Flux Vector Control of an Induction Motor Drive for Energy-efficient Operation of a Centrifugal Pump |
|
Jain, Monika
Evaluation of Energy Efficient Strategies for Buildings in Tropical Climates |
|
Jain, Shobhit
Reducing Aflatoxin Failures in Chilli across the Value Chain |
|
Jansri, Anurak
Chaotic Control for the Reactor of a Continuous Microwave Biomass Carbonization Process |
|
Javadi, Hasan
A Technology Roadmap for Energy Productivity in Iranian Steel Industry |
|
javadi, Mehrdad
A mixed optimization model for a multi-product advanced planning and scheduling system by considering learning effect |
|
Jawad, Badih
Higher Education Institutions and Industry Collaboration |
|
Jawhar, Imad
Challenges of Developing UAV Applications: A Project Management View |
|
Jay, Dharamsi Tejas
OUNano A novel method and framework to optimize the utilization of digital communication channel and storage resources for textual based transactions |
|
Jayaraman, Raja
A Polynomial Goal Programming Model with Application to Energy Consumption and Emissions in United Arab Emirates |
|
Integrating Supply Chain Data Standards in Healthcare Operations and Electronic Health Records |
|
Jayasinghe, Rumesh
Technological Needs Assessment of Traditional Brass Industry to Enhance the Productivity |
|
Jeenanata, Chawalit
Supply Chain Collaboration and Service Innovation in Thai Hotel Industry |
|
Jena, Sarat
Impact of advertising on closed loop supply chain profit under stochastic demand and return of items |
|
Jeyanthinathasarma, Gowrynathan
Detrimental effects of poor Human Resources Management: Case study from Sri Lanka |
|
Technological Needs Assessment of Traditional Brass Industry to Enhance the Productivity |
|
Jha, J.K.
Optimal production-inventory policy under strict carbon cap in a supply chain with backorders and lost sales |
|
Jha, P.C.
Multi-Criteria Decision Approach for a Sustainable Reverse Logistics Network under Fuzzy Environment |
|
Optimal Control Policy to Production and Inventory System with Price-Dependent Demand in Segmented Market |
|
Optimal Control Promotional Policy for Consumer Durable Product in a Segmented Market incorporating Goodwill |
|
Jiang, Steven
An Integrated Cognitive Performance Evaluation Framework for Urban Search and Rescue Applications |
|
Developing a Patient Transfer Device Prototype Using Human Factors Techniques and Human Digital Modeling |
|
Usability Evaluation of Web-Based Interfaces for Type2 Diabetes Mellitus |
|
Jimerson, Brittney
Developing a Patient Transfer Device Prototype Using Human Factors Techniques and Human Digital Modeling |
|
Using Digital Human Modeling to Predict Operator Performance of a Mobile Fluid Powered Patient Transfer Device |
|
Jokar, Gh. Reza
CMMS; Why and How- Case study: Morvarid Petrochemical Company |
|
Jorge Gamarra, Caio
Product Lifecycle Management, Digital Factory and Virtual Commissioning: analysis of these concepts as a new tool of lean thinking |
|
K S, RAJEEV
Markov Chain applied for the prediction of Non Performing Assets in a Non Banking Financial institution |
Top |
k.v, krishnasastry
MULTI OBJECTIVE OPTIMIZATION OF DRILLING PARAMETERS OF CFRC COMPOSITES BY USING GRA METHOD |
|
Kadhim, Jawad
Improving Mechanical and Fatigue Characteristic of Trans-Tibial Prosthetic Socket |
|
Kadry, Seifedine
Modeling and Simulation of Dynamic Bungee Jumping Using Matlab An engineering educational case study |
|
Kady, Rani
An Economical Analysis of Residential Hybrid Solar-Wind Power Generators in Abu Dhabi |
|
Kafumbe, Said
Operational Process for Manufacturing a MEMS Micro-Cantilever System |
|
Kaid, Husam
Evaluation of Deadlock Control Design s in Automated Manufacturing Systems |
|
Metaheuristics for Identical Parallel Machines Scheduling to Minimize Mean Tardiness |
|
Kalashnikov, Vyacheslav
Consistent Conjectural Variations Equilibrium in a Human Migration Model |
|
Consistent Conjectural Variations Equilibrium in a Human Migration Model |
|
Kalashnykova, Nataliya
Consistent Conjectural Variations Equilibrium in a Human Migration Model |
|
Consistent Conjectural Variations Equilibrium in a Human Migration Model |
|
Kamaruddin, Shahrul
Numerical Assessment on Makespan Minimization by Adopting NEH Heuristics in Permutation Flow Shop |
|
THE EFFECTS OF ORGANIZATIONAL INNOVATION ON OPERATIONAL PERFORMANCE AND OTHER TYPES OF INNOVATION |
|
Kamaruzzaman, Syahrul Nizam Kamaruzzaman
The Evaluation of Performance Criteria for Healthcare Facilities Services in Malaysia |
|
Kamma, Taranikanth
Implementing Lean Six Sigma to improve the ratio of admissions to placements in an academic year: Statistical and Psychological case study of a technical institute. |
|
Automating Field Motor and Irrigating Systems for better crop yield |
|
Kamola, Liga
Practical aspects of sustainable construction in Latvia |
|
The Electricity Sector Modernization Directions for the Development of Latvian National Economy |
|
Kamols, Uldis
The Electricity Sector Modernization Directions for the Development of Latvian National Economy |
|
Kamrani, Ali
Patient Specific Mandibular Implant for Maxillofacial Surgery using Additive Manufacturing |
|
Predictive Modeling of Tumors using RP |
|
Kanakana, Grace
Modification and Performance Evaluation of Height Adjustable Paraplegic WheelChair |
|
Kara, Imdat
New Formulations for Team Orienteering Problem |
|
Karageorgos, Anthony
A Fuzzy Linguistic Approach for Human Resource Evaluation and Selection in Software Projects |
|
Karia, Noorliza
Assessing Halal Logistics Competence : An Islamic-based and Resource-based View |
|
Karim, Abbas
Performance evaluation of IP-Ad Hoc gateways |
|
Karima, Adel-Aissanou
Performance evaluation of IP-Ad Hoc gateways |
|
Karima, BELAIDE
ON ADAPTATIVE ESTIMATION IN PERIODIC PURELY LONG MEMEORY MODELS. |
|
Karimy, Nasim
A Technology Roadmap for Energy Productivity in Iranian Steel Industry |
|
Kassa, Rabah
An AHP-Based Evaluation Method to Enhance Consensus in Agent-Mediated Negotiations on Multiple Issues with Incomplete Information |
|
Kataria, Vineet
EducApp |
|
Kaul, Arshia
Optimal Control Promotional Policy for Consumer Durable Product in a Segmented Market incorporating Goodwill |
|
Kauškale, Linda
Construction management - challenges, influencing factors and importance of investment climate |
|
Influence of Development of National Economy on the Construction Business |
|
Kayvanfar, Vahid
Intelligent Water Drops Algorithm on Parallel Machines Scheduling |
|
Resource Management For Workflows In Cloud Computing Environment Based On Group Technology Approach |
|
Kazemkhanlou, Hamid
A SURVEY ON FACTORS INFLUENCING THE USAGE OF MOBILE VALUE-ADDED SERVICES; An Empirical Investigation Among Iranian Users |
|
An integrated approach using Data Envelopment Analysis and Balanced Score Card to Supply Chain Performance Evaluation |
|
Keivanpour, Samira
Toward a Projection model for estimation of End of Life Aircarfts |
|
Kesavan, Ramesh Aravind
Detrimental effects of poor Human Resources Management: Case study from Sri Lanka |
|
Keshvari, Adnan
CMMS; Why and How- Case study: Morvarid Petrochemical Company |
|
Khademi, Hasan
Design portfolio factors motivating university employees to improve productivity using BLP and ANP Fuzzy models |
|
Khademi Mehdi, Mohamad
A Model to Incorporate Demand Response Programs in Security Constrained Unit Commitment |
|
KHALFI, Linda
Comparing RDS with QMC methods |
|
Khalid, Samina
The Role of Knowledge Management in Global Software Engineering |
|
Khalifa, GAYE
Metamodel product based on the coupling of the extended design matrix X-DSM and formalism SysML |
|
Khan, Nawar
Empirical Study of the Impact of Software Quality Practices on Product Performance in Engineering Firms in Pakistan |
|
Khan, Nawar
Integrated Role of TQM and Technology Management in Organizational Sustainability |
|
Khanzode, Vivek
DYNAMIC RISK ASSESSMENT TOOL FOR SUPPLY CHAIN: A RISK QUANTIFICATION AND ANALYSIS FOR DECISION MAKING |
|
Khanzode, Vivek
Improvement of Forecasting Accuracy for Personal Care Products: A Hybrid Approach |
|
Khatami, Alireza
An efficient firefly algorithm for the flexible job shop scheduling problem |
|
Khoshnoud, Mohammad
A Fuzzy Goal Programming Approach for Facility Location Problem (Case Study: Service Providers) |
|
Khoury, Joseph
Mental Model Moderation, Modification and Managing (5M) framework, a System Dynamics and Brunswikian Lens Model approach to Complex Decision Making |
|
Kim, Gwang-Myung
Designing a Fire Incident Response Information Support System |
|
King, Nelson
Exploring the Impact of Technology Adoption on E-prescribing Roles and Routines |
|
Kissani, Ilham
Modeling Dispatching Buses with High Service Level |
|
Kondaveety, Vijay Bhaskar
Implementing Lean Six Sigma to improve the ratio of admissions to placements in an academic year: Statistical and Psychological case study of a technical institute. |
|
Automating Field Motor and Irrigating Systems for better crop yield |
|
Koonce, David
Important Soft Skills for Engineers to Succeed in a Working Environment |
|
Krishna, Sudhin
Analysis and Evaluation of Total and Partial Productivity using Fuzzy Optimization Technique: A Research Article as Management Perspective |
|
Krishnamoorthy, Kalyanasundaram
Evaluation of Human performance in Data Entry tasks: Effect of Time Pressure and Complexity |
|
Kulatunga, Asela
Detrimental effects of poor Human Resources Management: Case study from Sri Lanka |
|
Technological Needs Assessment of Traditional Brass Industry to Enhance the Productivity |
|
KULKARNI, ASHUTOSH
Improving Effectiveness of Teaching for Enhancing Employability of Engineering Graduates |
|
KULKARNI, PRAKASH
Improving Effectiveness of Teaching for Enhancing Employability of Engineering Graduates |
|
Kulkarni, Shailesh
On a stochastic model of an unreliable production system with outsourced maintenance |
|
KULKARNI, SHRINIWAS
Improving Effectiveness of Teaching for Enhancing Employability of Engineering Graduates |
|
KUMAR, RAMESH
Green Energy as an Alternative Fuels in I C Engine |
|
Kumar, Vikas
Adoption of Operations Improvement Methods in the Greek Engineering Sector |
|
Corporate Sustainability and Business Excellence |
|
Kumru, Mesut
Calendar-Based Short-Term Forecasting of Daily Average Electricity Demand |
|
Kumru, P.Y.
Calendar-Based Short-Term Forecasting of Daily Average Electricity Demand |
|
Kung, Li
A Recommender System for the Optimal Combination of Energy Resources with Cost-benefit Analysis |
|
Kwak, Moon Kyu
Numerical analysis of two-phase bubbly flow in an industrial odor remover employing effective microorganisms solution |
|
La Torre, Davide
A Polynomial Goal Programming Model with Application to Energy Consumption and Emissions in United Arab Emirates |
Top |
Lahdelma, Risto
Multicriteria-based decision aiding framework for assessing energy policy towards sustainable and low carbon energy paths |
|
LAI, CHIA-LIANG
Application of Soft Computing Techniques to Forecast Monthly Electricity Demand |
|
Laouafi, Abderrezak
Artificial Intelligence Based approach for Daily Peak Electricity Demand Forecasting in Algeria |
|
Laouar, Lakhder
Modeling of temperature field at outlet of continuous casting mold |
|
LAOUAR-MEFTAH, SIHAM
Buoyancy ratio effects on coupled radiation and double-diffusive convection in non-gray air-H2O mixtures |
|
Effect of horizontal walls emissivity on coupled double diffusive convection and non gray-gas radiation of air-H2O mixture in a cooperating case |
|
Lazarova-Molnar, Sanja
Modeling and Simulation for Enterprise Decision-Making: Successful Projects and Approaches |
|
Leau, Jia Xin
The effect of time pressure, working position, component bin position and gender on human error in manual assembly line |
|
LeBlanc, Larry
Effective Design of Spreadsheets for Analytics: Methods for Minimizing Errors |
|
Lee, Antonio
An Integrated Cognitive Performance Evaluation Framework for Urban Search and Rescue Applications |
|
LEMONNIER, Denis
Buoyancy ratio effects on coupled radiation and double-diffusive convection in non-gray air-H2O mixtures |
|
Effect of horizontal walls emissivity on coupled double diffusive convection and non gray-gas radiation of air-H2O mixture in a cooperating case |
|
Leonardo, Jussara
Product Lifecycle Management, Digital Factory and Virtual Commissioning: analysis of these concepts as a new tool of lean thinking |
|
Leono, Deby
Pursuing the quality of driving through an understanding of job security, job satisfaction, and perceived safety as antecedents of motorcycling behaviors in Jakarta, Indonesia |
|
Li, N.
The impact of non-stationary demand and forecasting on a failure-prone manufacturing system |
|
Li, Zhiwu
Evaluation of Deadlock Control Design s in Automated Manufacturing Systems |
|
Liang, Chih-Chin
Efficiently Serving Customers at a Call Center |
|
Lim, Ming K.
Adoption of Operations Improvement Methods in the Greek Engineering Sector |
|
Corporate Sustainability and Business Excellence |
|
Limam, Mohamed
CLV model selection for segmentation perspective |
|
Lin, James
Airport Baggage Handling System Simulation Modeling Using SysML |
|
Simulation optimization with GA and OCBA for semiconductor back-end assembly scheduling |
|
Lin, Zih-Han
Assessment of the Solar Power Investment with Feed-in Tariff Policy: A Case in Taiwan |
|
Lotfi, Farbod
Application of Six Sigma in manufacturing of power plant Projects |
|
Lu, Chih-Wei
Anthropometric Study of Indonesian University Students in Jakarta |
|
Lyu, JrJung
Applying green manufacturing model to build sustainable competitiveness |
|
Ma, Huafan
Reverse Supply Chain for Remanufacturing with Uncertain Demand and Return Product Yield |
Top |
Maciel, Gerardo
Production Sequencing in a Fifth Wheel Industry: Case Study |
|
madanhire, ignatio
Aggregate Production Planning Framework in a Multi-Product Factory |
|
Energy Management Options in a Fertilizer Manufacturing Plant |
|
Total Productive Maintenance (TPM) - Strategy for Competitiveness: Case Study |
|
Maharaj, Davatee
Assessment of the use of Arcelor Mittal Electric Arc Furnace Slag as Coarse Aggregates in Concrete Production |
|
Mahmoudabadi, Abbas
A Fuzzy Goal Programming Approach for Facility Location Problem (Case Study: Service Providers) |
|
Developing a Risk Level Determination Method for Schools in the Vicinity of Inter-City Roads |
|
Developing a Two-Stage Procedure for Estimating Origin-Destination Matrix based on Routes and Traffic Volume |
|
Mahmoudabadi, Mahdieh
Developing a Two-Stage Procedure for Estimating Origin-Destination Matrix based on Routes and Traffic Volume |
|
MAHROUCHE, Idir
Robotic Nursing & Caring – Study Example: Robotic Nursing Assistant (RoNA) System |
|
Majid, Amir J.
Speech to Sign-Language & Sign-Language to Speech Translator |
|
Majumdar, Surya Sarathi
Network DEA Efficiency Improvement Under Constant Sum of Inputs/Outputs |
|
Majumder , Souva
Minimizing Delay in Infrastructure Project using an integrated approach of Interpretive Structural Modeling and Bayesian Belief Network |
|
Malekipirbazari, Milad
A Temporal Analysis of Vessel Type Traffic in Istanbul Strait Anchorages |
|
Malik, Mohsin
A Multi-Objective Optimization Approach to Solve a 2-Dimensional Cutting Stock Problem in the Aerospace Industry |
|
Malik, Tufail
A Polynomial Goal Programming Model with Application to Energy Consumption and Emissions in United Arab Emirates |
|
Mall, Rishabh Deo
Two Step Facility Layout Optimization of an Indian Bus Body Manufacturing Plant Using Artificial Bee Colony Algorithm and its Variants |
|
Mallet, Damien E B
Autonomous Messenger Using Propeller LED Display. |
|
Malmir, Behnam
Analyzing and Estimating the project success with a hybrid method based on fuzzy theory and decision making analysis |
|
Development of a supply chain model for healthcare industry |
|
Evaluating and ranking the learning components of entrepreneurial skills based on a hybrid approach of the M-Learning technology and TOPSIS method |
|
Selecting warehouse location by means of the balancing and ranking method with an interval approach |
|
Mamdouh, Amany
Dynamic Cross Impact Analysis with Markov Chain |
|
MANGENA, NJABULO
Development of a System for Designing Customised Dental Implants |
|
Manjunathan, Sanjeev
Operational Improvement of Warehouse Operations |
|
Manohar, Hansa Lysander
Lean Management Practices to improve supply chain performance of Leather Footwear Industry |
|
Mansour, Charbel
Unsustainability in emergent systems: a case study of road transport in Greater Beirut Area. |
|
MANUPATI, VIJAYAKUMAR
Reconfiguration of Networked Seru Production systems in an Indian Perspective |
|
Maouche, Hichem
Modeling of temperature field at outlet of continuous casting mold |
|
Mapfaira, Herbert
An Alternative Framework for Engineering Change Management |
|
Simulation and Analysis of a Bank Queuing System |
|
Mardin, Farid
Design Multi-echelon Supply Chain Network Considering Disruption Risk |
|
Martinez, Mario Alexander
Making Decisions in transactional costing for transportation logistic function Horizontal Integration Strategy |
|
Making decisions in transactional costing for transportation logistic function- Horizontal Integration Strategy |
|
Masaeli, Mobina
An ant colony algorithm for the Quadratic Set Covering Problem |
|
Mascle, Christian
Toward a Projection model for estimation of End of Life Aircarfts |
|
Mashhadi Alizadeh, Koorosh
Intelligent Water Drops Algorithm on Parallel Machines Scheduling |
|
Resource Management For Workflows In Cloud Computing Environment Based On Group Technology Approach |
|
Masood, Athar
Empirical Study of the Impact of Software Quality Practices on Product Performance in Engineering Firms in Pakistan |
|
Integrated Role of TQM and Technology Management in Organizational Sustainability |
|
Massaeli, Ali
A program for developing of Risk-Based Inspection (RBI) and maintenance procedures modification for a gas treating plants of N.I.G.C. |
|
Mat Saman, Muhamad Zameri
The Impact of Enterprise Risk Management Practices on Malaysian Public Higher Educational Institution Performance: A Literature Review |
|
Matt, Dominik T.
Increasing productivity in ETO construction projects through a lean methodology for demand predictability |
|
Mobile On-site Factories – scalable and distributed manufacturing systems for the construction industry |
|
Maydanchi, Mohammad
Business Intelligence Approach to Measure Customer Profitability |
|
Mazloom-Nezhad Maybodi, Babak
High-performance Feature Extraction Method for Texture Classification |
|
Mbohwa, Charles
A Multi-Criteria Approach for Nurse Scheduling - Fuzzy Simulated Metamorphosis Algorithm |
|
A SMALL HYDRO POWER PLANT AT TSANGA RIVER (NYANGA) TO FEED INTO A GRID |
|
Aggregate Production Planning Framework in a Multi-Product Factory |
|
An Alternative Framework for Engineering Change Management |
|
Challenges hindering development of small scale of biodiesel Production in South Africa |
|
Design of a fuzzy logic control system for monitoring gearbox jamming in a bottle washer machine |
|
Life cycle Assessment of Steel balls: Case study – Craster International |
|
METHOD OF LINES BASED ON FINITE ELEMENT TECHNIQUE TO ANALYSE ELECTROMAGNETIC PROBLEMS |
|
Simulation and Analysis of a Bank Queuing System |
|
The Effectiveness of Micro Financing Rural Women in Limpopo Province OF South Africa |
|
The impact of biodiesel production on land use change in South Africa |
|
THERMAL STRESS AND CREEP ANALYSIS OF BOILER TUBES |
|
Total Productive Maintenance (TPM) - Strategy for Competitiveness: Case Study |
|
Used Vegetable Oil (UVO) As Feedstock for Biodiesel Production in South Africa |
|
VIBRATIONAL ANALYSIS OF ROTARY MACHINES |
|
Mcheneck, Hanaa
A Hybrid SERVQUAL-ORGANIZATIONAL EFFECTIVENESS MODEL Approach for 3PL Evaluation and Selection Using AHP-DEA |
|
Md Ariff, Mohd Shoki
The Impact of Enterprise Risk Management Practices on Malaysian Public Higher Educational Institution Performance: A Literature Review |
|
Megdouda, Ourbih
Refined Descriptive Sampling in multidimention |
|
Méndez, Ricardo
Production Sequencing in a Fifth Wheel Industry: Case Study |
|
Meriama, Kerboua
optimization of the concentration of lubricating oil additives of gasoline engines |
|
Mesgarian, Reza
Kyoto Protocol and Iran's Energy Policy adaptation assessment |
|
Meshreki, Mouhab
Diagnosis of machining outcomes based on machine learning with Logical Analysis of Data |
|
Mhlanga, Samson
Development of a System for Designing Customised Dental Implants |
|
Michaelides, Roula
Product-Service System in Inventory Control: A new paradigm? |
|
Mir, Mustahsan
Comparison of Enhanced Constructive Layout Optimization Technique with Tabu-Search and Particle Swarm Optimization Methodologies |
|
Mirabadi, Saleh
Dynamic Maintenance in Series Manufacturing Systems With Consideration of Buffer Inventory |
|
Mirzapour, Hamed
CMMS; Why and How- Case study: Morvarid Petrochemical Company |
|
Mkrtchyan, Armen
Modeling Distributed Product Development Processes in Small and Medium Enterprises |
|
Moakofi, Nosi P K
Simulation and Analysis of a Bank Queuing System |
|
Moein, Rahim
Evaluating and ranking the learning components of entrepreneurial skills based on a hybrid approach of the M-Learning technology and TOPSIS method |
|
Selecting warehouse location by means of the balancing and ranking method with an interval approach |
|
Moeng, Ambrosia
Simulation and Analysis of a Bank Queuing System |
|
Mohamad, Akramin
The effect of time pressure, working position, component bin position and gender on human error in manual assembly line |
|
Mohamad, Norizah
COLLABORATIVE INVOLVEMENT IN THE NEW PRODUCT DEVELOPMENT PROCESS BETWEEN A MAJOR OEM AND ITS SUPPLIERS |
|
THE EFFECTS OF ORGANIZATIONAL INNOVATION ON OPERATIONAL PERFORMANCE AND OTHER TYPES OF INNOVATION |
|
Mohamad, Norsiah
COLLABORATIVE INVOLVEMENT IN THE NEW PRODUCT DEVELOPMENT PROCESS BETWEEN A MAJOR OEM AND ITS SUPPLIERS |
|
Mohamaddan, Shahrol
Design Capabilities Development in A Malaysian Automotive Vendor Company |
|
Mohamed, Nader
Challenges of Developing UAV Applications: A Project Management View |
|
e-Commerce Cloud: Opportunities and Challenges |
|
e-Health Cloud Implementation Issues and Efforts |
|
Modeling and Simulation for Enterprise Decision-Making: Successful Projects and Approaches |
|
Mohammadi, Kasra
Feasibility of Installing Wind Turbines for Electricity Generation in Jarandagh, Iran |
|
Wind-Solar Energy Potentials for Three Free Trade and Industrial Zones of Iran |
|
Mohammed, Farhan
Challenges of Developing UAV Applications: A Project Management View |
|
Mohammed, Reiam
Optimization of excess and waste of closed loop supply chain system by using fuzzy model |
|
Mohan Lal, Tarun
Data Analytics and Business Intelligence: Applications and Trends in Healthcare |
|
Mohd Daud , Noorul Amni Qistina
Design Capabilities Development in A Malaysian Automotive Vendor Company |
|
Mohd Rusli, Mohd Hazri
Pull System Production using Antenna Kanban - Hardware architecture of Antenna model |
|
Selection Criterion of Production Methods used in the Kanban Pull System at Malaysian Auto Suppliers |
|
Mohd Yusuff, Rosnah
Design Capabilities Development in A Malaysian Automotive Vendor Company |
|
Moiduddin, Khaja
Patient Specific Mandibular Implant for Maxillofacial Surgery using Additive Manufacturing |
|
Molani Aghdam, Mohammad
House of Quality Improvement by New Design Requirements Generation |
|
Mollaverdi, Naser
Dynamic Maintenance in Series Manufacturing Systems With Consideration of Buffer Inventory |
|
Maintenance Optimal Strategy Selection Using Quantitative-Qualitative Model and Multi Criteria Decision Making Approach |
|
Monplaisir, Leslie
Managing New Product Technology Decisions under Technical and Demand Uncertainty |
|
MOOSA, Sharafali
On a stochastic model of an unreliable production system with outsourced maintenance |
|
Moradlou, Hamid
Supply Chain Management Issues in Re-shoring Manufacturing Activities within the context of Postponement Strategies |
|
Morelato França, Paulo
Heuristcs for Legislative Districting |
|
Morton , S.C.
Product-Service System in Inventory Control: A new paradigm? |
|
Mostafa, Noha
The Production-Inventory-Distribution-Routing Problem: An integrated formulation and solution framework |
|
Mostafaeipour, Ali
Design portfolio factors motivating university employees to improve productivity using BLP and ANP Fuzzy models |
|
Feasibility of Installing Wind Turbines for Electricity Generation in Jarandagh, Iran |
|
Implementing Data Envelopment Analysis(DEA) Methodology to Prioritize Wind Turbine Locations for Sistan-Baluchistan, Iran |
|
Wind-Solar Energy Potentials for Three Free Trade and Industrial Zones of Iran |
|
Motevali Haghighi, Sara
Performance Optimization of Electricity Distribution Units with Random Variations |
|
Mourad, Abdel-Hamid
Qualitative versus quantitative course assessment |
|
Mourad, Mordjaoui
Artificial Intelligence Based approach for Daily Peak Electricity Demand Forecasting in Algeria |
|
Models Based Artificial Intelligence for Estimating the Cost of Repair and Maintenance of Buildings |
|
Mousavi, Maryam
Evaluating and ranking the learning components of entrepreneurial skills based on a hybrid approach of the M-Learning technology and TOPSIS method |
|
Mpanza, Zanele
Developing a conceptual transport or logistics model for small-scale farmers |
|
Mpofu, Khumbulani
Integration of Agent Technology into Manufacturing Enterprise: A Review and Platform for Industry 4.0 |
|
Mrabet, Zouhair
Stakeholder's Preferences Modeling in Managing Economic Sustainability |
|
Muhamad, Mohd Razali
COLLABORATIVE INVOLVEMENT IN THE NEW PRODUCT DEVELOPMENT PROCESS BETWEEN A MAJOR OEM AND ITS SUPPLIERS |
|
Muhammad, Masdi
Condition-based maintenance of gas turbine based on short-Term performance prognostic |
|
Muhamud-Kayat, Suzilawati
Pull System Production using Antenna Kanban - Hardware architecture of Antenna model |
|
Selection Criterion of Production Methods used in the Kanban Pull System at Malaysian Auto Suppliers |
|
Mukhopadhyay, Samar
Reverse Supply Chain for Remanufacturing with Uncertain Demand and Return Product Yield |
|
Munakata, Satoshi
Maintenance Schedule Optimization Based on Failure Probability Distribution |
|
Muraira, Etna
A Scheme to Achieve Distribution Agility |
|
Murena, Eriyeti
Development of a System for Designing Customised Dental Implants |
|
Musa, Zairul Nisham Musa
The Evaluation of Performance Criteria for Healthcare Facilities Services in Malaysia |
|
Mushiri, Tawanda
Design of a fuzzy logic control system for monitoring gearbox jamming in a bottle washer machine |
|
METHOD OF LINES BASED ON FINITE ELEMENT TECHNIQUE TO ANALYSE ELECTROMAGNETIC PROBLEMS |
|
THERMAL STRESS AND CREEP ANALYSIS OF BOILER TUBES |
|
VIBRATIONAL ANALYSIS OF ROTARY MACHINES |
|
Muslimen, Rasli
Design Capabilities Development in A Malaysian Automotive Vendor Company |
|
Mutingi, Michael
A Multi-Criteria Approach for Nurse Scheduling - Fuzzy Simulated Metamorphosis Algorithm |
|
An Alternative Framework for Engineering Change Management |
|
Simulation and Analysis of a Bank Queuing System |
|
MUTLU, FATIH
the impact of production scheduling policies and buffer zone size in process synchronization an application in the primary aluminum industry |
|
Mwasha, Abrahams
Assessment of the use of Arcelor Mittal Electric Arc Furnace Slag as Coarse Aggregates in Concrete Production |
|
N.Ahmed, Abd ElHadi
Dynamic Cross Impact Analysis with Markov Chain |
Top |
Nacer, Hassina
A Distributed Security Framework for Accessing Composite Web Services |
|
Nair, Harish
Analysis and Evaluation of Total and Partial Productivity using Fuzzy Optimization Technique: A Research Article as Management Perspective |
|
Nair, Varun
Role of Electrospun Zno-Nio Metaloxide Nanocomposite Fibers for Sensor Applications Varun Nair SRM University Chennai, India |
|
Nait Said, Rachid
Fuzzy Modelling of Uncertain Data in the Layers Of Protection Analysis |
|
Implementing BORA in Oil and Gas Process, Case Study:Algerian Industry |
|
Navasardian, Ashot
Automation and simplification of production control of SOG silicon from sand on the basis of monoxide process |
|
Nawaz malik, Akhtar
Configuration management and its implementation barriers in Public Sector Engineering Organizations of Pakistan: An Empirical Study |
|
Nechi, Salem
Stakeholder's Preferences Modeling in Managing Economic Sustainability |
|
Nguyen, Troy
A Recommended Approach to Improve Utilization of Local Workforce in the Middle East Megaprojects |
|
Nikzad, Erfaneh
Statistical analysis of total process capability index in two-stage processes with measurement errors |
|
Niu, B.
Scheduling of Multi-Die Operations with Multiple Maintenance Tasks |
|
The impact of non-stationary demand and forecasting on a failure-prone manufacturing system |
|
Noureddine, Bourmada
The approach of Risk Analysis in the sector of food-processing |
|
Ntuen, Celestine
Designing a Fire Incident Response Information Support System |
|
Nurcahyo, Rahmat
ANALYSIS OF MESOERGONOMIC AT LOGISTIC PROCESS OF BOTTLED DRINKING WATER |
|
Nwanga, Emeka
Impact of Big Data Analytics to Nigerian Mobile Phone Industry |
|
Ocak, Zeynep
Application of Interactive Planning Methodology to Multi-Project Environment |
Top |
Odigure, Joseph
Fixed Bed Column Study for Pb (II) adsorption using Calcium-Alginate Treated Shea Butter Husk (TSBH) |
|
Okafor, Uchenwa Linus
APPROXIMATING SEQUNCES BY LEAST SQUARES POLYNOMAILS AND TIME -DEPENDENT TRIGOMETRIC POLYNOMAILS. |
|
Oladokun, Victor
Fragmentable Group and Item Bin Packing with Compatibility Preferences |
|
Olagunju, Olabisi
ERGONOMIC EVALUATION OF POST MECHANICAL EFFECTS OF VIBRATION ON COMMERCIAL BUS DRIVERS |
|
Olamaee, Javad
A Model to Incorporate Demand Response Programs in Security Constrained Unit Commitment |
|
OLULEYE, AYODEJI
On the Reducibility of Multicriteria Scheduling Problems to Bicriteria Scheduling Problem |
|
Omer, Zahi
Economic Feasibility Study of "Battery-less" Renewable Energy (PV and Fuel Cell) System for Remote Areas in UAE via Water Electrolysis |
|
Onwuka, Elizabeth
Impact of Big Data Analytics to Nigerian Mobile Phone Industry |
|
Ordoobadi, Sharon
Application of Taguchi Loss Functions and AHP in Evaluation of Advanced Manufacturing Technologies |
|
Oriolowo, Kolawole
Determination of Safe Mass of Backpack for Students in Tertiary Institutions |
|
Orta, Minerva M.
Achieving Competitiveness Through Setup Time Reduction |
|
Othman, Mohammad
Implementing Quality Management in Construction Projects |
|
Ouache, Rachid
Reliability quantitative risk assessment |
|
OUAFI, Fayçal Mounir
Improved Frank-Wolfe method: Application to the traffic assignment problem |
|
Ouafi, Rachid
Improved Frank-Wolfe method: Application to the traffic assignment problem |
|
OUAZRAOUI, NOUARA
Fuzzy Modelling of Uncertain Data in the Layers Of Protection Analysis |
|
Implementing BORA in Oil and Gas Process, Case Study:Algerian Industry |
|
Oulamara, Ammar
Minimizing the Number of Machines in the Fixed Interval Scheduling Problem with Energy Constraints |
|
Oun, Hatem
Was It Management-Technical Failure or Safety Ignorance? Root cause Analysis of the BP Oil Spill in the Gulf of Mexico |
|
OURBIH, Megdouda
Comparing RDS with QMC methods |
|
Survival function estimation with Nonparametric Adaptive Refined Descriptive Sampling algorithm |
|
OURBIH-BAGHDALI, LATIFA
A different way to compute RDS estimate |
|
Ourbih-Tari, Megdouda
A different way to compute RDS estimate |
|
Solving IFRI transportation problem: A case study |
|
Oyetunji, Elkanah
On the Reducibility of Multicriteria Scheduling Problems to Bicriteria Scheduling Problem |
|
Oz, Dindar
Path Planning for Ships Using Large Adjacency Grids |
|
Ozcelik, Gokhan
A Fuzzy Integral Approach for Determining the Degree of Effect of the Global Warming on the Cities of Turkey |
|
Network Interdiction Problem: Literature Survey |
|
Özdemir Akyildirim, Öznur
Sustainability Applications in Turkish Production Firms |
Top |
P, Onkar
Material Optimization and Process Improvement using Simulation for Makeshift Auto Chassis Manufacturing of an Indian SME |
Top |
Paatero, Jukka V.
Multicriteria-based decision aiding framework for assessing energy policy towards sustainable and low carbon energy paths |
|
Pakkala, TPM
Inventory replenishment for profit maximization over a finite horizon when cost changes |
|
Palanisami, Navaneethakrishnan
Analysis and Evaluation of Total and Partial Productivity using Fuzzy Optimization Technique: A Research Article as Management Perspective |
|
Pandey, Keshav
OUNano A novel method and framework to optimize the utilization of digital communication channel and storage resources for textual based transactions |
|
Pandian, Annamalai
Investigation of Maintenance Assumptions for an Automotive Production line using Simulation Modeling |
|
Panjehfouladgaran, Hamidreza
Ranking of Critical Success Factors in Reverse Logistics by TOPSIS |
|
Panugot, Regil
The Musculoskeletal Disorder Effects on the Use of Single and Dual Monitor Workstations |
|
Parida, Ratri
Value-driven vs Process-driven Methodology for Software Development: A Case Study |
|
Park, Cheol Woo
Numerical analysis of two-phase bubbly flow in an industrial odor remover employing effective microorganisms solution |
|
Park, Eui
Designing a Fire Incident Response Information Support System |
|
Developing a Patient Transfer Device Prototype Using Human Factors Techniques and Human Digital Modeling |
|
Using Digital Human Modeling to Predict Operator Performance of a Mobile Fluid Powered Patient Transfer Device |
|
Park, Jinwoo
Relieving electric power dependency during shortage with an on-site solar power supply |
|
Park, Joonyoung
Development of a Framework to Customize Design Methodologies for Product Service Systems |
|
PARKER, KEN
PRINCIPLES OF CONTRACT CLAIMS MANAGEMENT – A REVIEW OF THE NIGERIAN CONSTRUCTION INDUSTRY |
|
Pasumarthy, Soumya
Evaluation of Energy Efficient Strategies for Buildings in Tropical Climates |
|
Patel, Parth
Operational Improvement of Warehouse Operations |
|
Patel, Sonal
NURSE-PHYSICIAN RATIO IN AN INTERNAL MEDICINE RESIDENCY CLINIC |
|
Pathik, Bishwajit Banik
A Research Framework of Supply Chain Management in Apparel Industry: Bangladesh Perspective |
|
Patro, Anshul
EducApp |
|
Pattabi, Pranav
Capacitive Deionization based Water Desalination System using an MPPT based Solar Charge Controller |
|
Payakkawan, Poomyos
Chaotic Control for the Reactor of a Continuous Microwave Biomass Carbonization Process |
|
Chaotic Encryption for Anti 2D Barcode Cloning |
|
Fuzzy Strategy with Anti-Overshoot Technique for Electronic Throttle Control |
|
Pearson, Yanthe
A Polynomial Goal Programming Model with Application to Energy Consumption and Emissions in United Arab Emirates |
|
Perez, Jaime
Making Decisions in transactional costing for transportation logistic function Horizontal Integration Strategy |
|
Making decisions in transactional costing for transportation logistic function- Horizontal Integration Strategy |
|
Philip, Deepu
Material Optimization and Process Improvement using Simulation for Makeshift Auto Chassis Manufacturing of an Indian SME |
|
Two Step Facility Layout Optimization of an Indian Bus Body Manufacturing Plant Using Artificial Bee Colony Algorithm and its Variants |
|
Pingulkar, Ashish
Improvement of Forecasting Accuracy for Personal Care Products: A Hybrid Approach |
|
Piya, Sujan
Jobshop Scheduling for Skill-Dependent Make-to-Order System |
|
Polled, Nida Lyn
Set-up Time Reduction at Stamping Station 1 of Tri-R Allied Industries Incorporated |
|
Pongsathornwiwat, Narongsak
Supply Chain Collaboration and Service Innovation in Thai Hotel Industry |
|
Poormoaied, Mostafa
Economic production quantity model under stochastic break down with new approach |
|
Poormoaied, Saeed
Economic production quantity model under stochastic break down with new approach |
|
PORNTEPKASEMSANT, PATRAPORN
Factor Affecting Construction Labor Productivity in Thailand |
|
Pourghaderi, Ahmad Reza
A Stochastic Approach to Appointment Sequencing |
|
Pozzi, Rossella
A Preliminary Proposal to Include Capacity Constraint in the Multi-product EOQ Model Using Hybrid Systems and Integer Linear Programming |
|
Pradhan, Anup
Used Vegetable Oil (UVO) As Feedstock for Biodiesel Production in South Africa |
|
Prakash, Ravi
Particle swarm optimization for natural grouping in context for Group Technology application |
|
Prasad, Sarada
A Binary Cuckoo Search Algorithm for Knapsack Problems |
|
Price, Brian
Acceptability of Lean Six Sigma in a Developing Economy: Results from Exploratory Research in Nigerian Consulting Companies |
|
Pujari, Nitin
OUNano A novel method and framework to optimize the utilization of digital communication channel and storage resources for textual based transactions |
|
Pundir, Ashok
Optimization Modeling for Production, Inventory and Distribution of Perishable Items: A Review |
|
Purwanto, Untung Setiyo
THE EFFECTS OF ORGANIZATIONAL INNOVATION ON OPERATIONAL PERFORMANCE AND OTHER TYPES OF INNOVATION |
|
Qarani, Ali
Photoelectric properties of Selenium |
Top |
Qazi, Abroon
A Novel Application of System Survival Signature in Supply Chain Risk Management |
|
Supply Chain Risk Management: Systematic literature review and a conceptual framework for capturing interdependencies between risks |
|
Quigley, John
A Novel Application of System Survival Signature in Supply Chain Risk Management |
|
Supply Chain Risk Management: Systematic literature review and a conceptual framework for capturing interdependencies between risks |
|
Raffi, Rumana Begum
COOLING MATTRESS AND APNEA DETECTOR WITH STIMULATOR FOR HIE NEONATES |
Top |
Ragavendar, Arun
Role of Electrospun Zno-Nio Metaloxide Nanocomposite Fibers for Sensor Applications Varun Nair SRM University Chennai, India |
|
Rahim, Abdur
Analyzing the Effect of Non-normality on the Solution Space for the Economic Statistical Design of X-bar Control Charts |
|
Rahman, Ataur
Electrical energy generation from car body build with Al2O3 filler ER Sandwiched by Carbon Fibre and Lithium Thin Plate |
|
Rahman, Azizur
Musculoskeletal Health and Safety of Aged Workers in Manual Handling Works |
|
Rahman, Chowdury
Assessment of Total Productive Maintenance Implementation in a Semi-automated Manufacturing Company through Downtime and Mean Downtime Analysis |
|
Rahman, Md. Mizanur
Multicriteria-based decision aiding framework for assessing energy policy towards sustainable and low carbon energy paths |
|
Rahman, Mohammad
Defining Service Quality Index Preferences in a Service Industry Using Analytic Hierarchy Process |
|
Rahmouni, Salah
Morphological characterization and optimisation of porous silicon films for photovoltaic application |
|
Raj R, Kiran
Capacitive Deionization based Water Desalination System using an MPPT based Solar Charge Controller |
|
RAJA MOHD RASI, RAJA ZURAIDAH
TOWARDS THE UNDERSTANDING OF THE RELATIONSHIP BETWEEN LEAN PRODUCTION AND OPERATIONAL PERFORMANCE IN THE MANUFACTURING INDUSTRY |
|
Rakhmawati, Rakhmawati
Vessel Routing Model in an Archipelago Crude Oil Distribution Problem |
|
Ramadan, Noha
Modeling and Simulation for Enterprise Decision-Making: Successful Projects and Approaches |
|
Ramos, Ana Luísa
Improving Tasting Processes in the Food Industry using ICT |
|
Improving the Productivity of a Packaging Line Using Lean Manufacturing Tools and Simulation |
|
The Crew Rostering Problem at Urban Mass Transit Companies: The Assignment of Crews without Predefined Work |
|
Ramshe, Nasrin
An ant colony algorithm for the Quadratic Set Covering Problem |
|
Ranjbarfard, Mina
Identifying the barriers of knowledge transfer in collaborative processes of public service sector: a study of tax determination process |
|
Ranmale, Govind
Spend Analysis: A Step for Procurement Efficiency |
|
Rapti, Elli
A Fuzzy Linguistic Approach for Human Resource Evaluation and Selection in Software Projects |
|
Rashed, Ahmad
Implementing Quality Management in Construction Projects |
|
Rasheed, Zulfa Abdulla
Speech to Sign-Language & Sign-Language to Speech Translator |
|
Rashid, Abu Raihan Md. Harunur
Design & Construction of an Ergonomic Footrest for an Electric Three Wheeler Vehicle |
|
Rauch, Erwin
Increasing productivity in ETO construction projects through a lean methodology for demand predictability |
|
Mobile On-site Factories – scalable and distributed manufacturing systems for the construction industry |
|
Regius, Florina
Role of Electrospun Zno-Nio Metaloxide Nanocomposite Fibers for Sensor Applications Varun Nair SRM University Chennai, India |
|
Rehan , Muhammad
Speech to Sign-Language & Sign-Language to Speech Translator |
|
Reimer, Don
Operational Improvement of Warehouse Operations |
|
Rezg, Nidhal
A production planning optimization for multi parallel machine under withdrawal right |
|
Production/Maintenance Optimization problem with random repair time |
|
Ribas, Jefferson
System to generate the operator productivity index inside production cell to improve the production process efficiency. |
|
ridjel, bachir
FRACTURE BEHAVIOR AND MECHANICAL CHARACTERIZATION OF A COMPOSITE ORTHOPEDIC USE IN THE TWO DIRECTION OF FLOW MOLDING |
|
Robles, Sofia
NURSE-PHYSICIAN RATIO IN AN INTERNAL MEDICINE RESIDENCY CLINIC |
|
ROCHA-LONA, LUIS
Adoption of Operations Improvement Methods in the Greek Engineering Sector |
|
Corporate Sustainability and Business Excellence |
|
Rodriguez-Lozano, Gloria
EFFICIENCY ANALYSIS OF FINANCIAL ACTORS TO ACHIEVE THE FINANCIAL INCLUSION IN COLOMBIA |
|
Rossak, Wilhelm
Smart City Logistik Erfurt (SCL): ICT Support for managing Fully Electric Vehicles in the Domain of inner City Freight Traffic |
|
Rossi, Tommaso
A Preliminary Proposal to Include Capacity Constraint in the Multi-product EOQ Model Using Hybrid Systems and Integer Linear Programming |
|
Rumanti, Augustina Asih
Organization Development through Value Chain and Technometric Model |
|
Rusman, Muhammad
Design Multi-echelon Supply Chain Network Considering Disruption Risk |
|
S, Paulraj
Prediction of Low Birth Weight Infants and Its Risk Factors Using Data Mining Techniques |
Top |
Saǧlam, inci elif
ANALYSIS OF SOCIO-ECONOMIC DEVELOPMENT OF PROVINCES IN TURKEY WITH USING DATA MINING TECHNIQUES |
|
Sabbadini, Francisco
Solid Waste Management by Consideration of the Pollution Credit Certificates Theory |
|
Saberi, Morteza
Improved Trust Prediction in Business Environments by Z-Numbers and Metrics of Maturity, Distance, and Density |
|
Sabzevar, Nikoo
THE IMPACTS OF COLLABORATION ON ECONOMIC AND ENVIRONEMTNAL PERFORMANCE OF LIQUEFIED NATURAL GAS MARKETS |
|
Sabzpooshan, Majid
Wind-Solar Energy Potentials for Three Free Trade and Industrial Zones of Iran |
|
sadique, Sarder
Production and Optimization of Aesthetic Braided Composite Bracket and Archwires by Wear Damages |
|
Saeed Osman, Mojahid
Route Finding Procedures for Performing Distribution Routing Function in Supply Chain |
|
Safari, Arsalan
Worldwide Venture Capital, Intellectual Property Rights and Innovation |
|
Safdar, Waleed
Configuration management and its implementation barriers in Public Sector Engineering Organizations of Pakistan: An Empirical Study |
|
SAGOO, AMRIT
PRINCIPLES OF CONTRACT CLAIMS MANAGEMENT – A REVIEW OF THE NIGERIAN CONSTRUCTION INDUSTRY |
|
Sahu, Ashish
Value-driven vs Process-driven Methodology for Software Development: A Case Study |
|
Saidam, Ali
Implementing Product Design Development Methodology for Improving Performance of Electrical Generator |
|
Salam, Asif
Optimization of Container Utilization: A Case Study |
|
Salama, Magdy
Optimal Siting For Electric Vehicle Charging Stations in Waterloo Region Using Trip Success Ratio |
|
Saleh, Mohamed
Dynamic Cross Impact Analysis with Markov Chain |
|
Saleh, Yahya
An Assessment of Maintenance Management Practicies in Palestinian Industries |
|
Salimi Beni, Saeed
A program for implementing of an Asset Integrity Management System in NIGC gas treating plants |
|
Samanta, Suman
Material Optimization and Process Improvement using Simulation for Makeshift Auto Chassis Manufacturing of an Indian SME |
|
Two Step Facility Layout Optimization of an Indian Bus Body Manufacturing Plant Using Artificial Bee Colony Algorithm and its Variants |
|
Sanayei, Amir
Managing New Product Technology Decisions under Technical and Demand Uncertainty |
|
Sánchez, Jhoselin
Production Sequencing in a Fifth Wheel Industry: Case Study |
|
Saptari, Adi
The effect of time pressure, working position, component bin position and gender on human error in manual assembly line |
|
Sarmah, S.P
Impact of advertising on closed loop supply chain profit under stochastic demand and return of items |
|
Optimal production-inventory policy under strict carbon cap in a supply chain with backorders and lost sales |
|
SASSI, Ons
Minimizing the Number of Machines in the Fixed Interval Scheduling Problem with Energy Constraints |
|
Sato, Nozomi
Ergonomic considerations in manual handling task for females based on the systematic review of literature |
|
Satoglu, Sule
Redesigning the Material Supply System of the Automotive Suppliers Based on Lean Principles and An Application |
|
Savsar, Mehmet
Fault Tree Analysis of Hazardous Conditions and Near Misses in a Company: A Case Application |
|
Sawada, Mikiko
Maintenance Schedule Optimization Based on Failure Probability Distribution |
|
Sawhney, Rupy
Production Sequencing in a Fifth Wheel Industry: Case Study |
|
SAYEED AHMED, GULAM MOHAMMED
Experimental Investigation of Magneto Rheological Damping Effect on Surface Roughness of Work Piece during an End Milling Process |
|
Schau, Volkmar
Smart City Logistik Erfurt (SCL): ICT Support for managing Fully Electric Vehicles in the Domain of inner City Freight Traffic |
|
Seada, Aya
Modeling and Analysis of Workforce Management Decisions in Modern Call Centers |
|
Sedaghat, Ahmad
Exergy Analysis of Reactive Combustion Processes in Gas Heaters |
|
Heat Losses from Human Body in Weather Condition of Amman City |
|
Neural Network Usage in Structural Crack Detection |
|
Seddighi Manesh, Mahdi
Binary integer formulation for Mixed- Model U-Line Assembly Line with the Approach of Dual Resource Constrained |
|
Septivani, Nike
Optimum Clustering and Routing Model using CVRP Cluster-First, Route-Second in a 3PL Provider |
|
Vessel Routing Model in an Archipelago Crude Oil Distribution Problem |
|
Setapa, Mariam
The Impact of Enterprise Risk Management Practices on Malaysian Public Higher Educational Institution Performance: A Literature Review |
|
Shaban, Yasser
Diagnosis of machining outcomes based on machine learning with Logical Analysis of Data |
|
Shafiq, Amber
Network Violators Dtection Model: flow base and node base customers |
|
Shahbari, Lana
Integrating Human Factors into Green Logistics |
|
Shahdi-Pashaki, Saleh
Resource Management For Workflows In Cloud Computing Environment Based On Group Technology Approach |
|
Shahriar, Md. Farhan
A Research Framework of Supply Chain Management in Apparel Industry: Bangladesh Perspective |
|
SHAMSUDDIN, ALINA
Geo-disasters in Relation with Climate Change: Student's Perspective via a Course-embedded Project |
|
Shamsuzzaman, Mohammad
Design of control chart for monitoring time-between-failures of a repairable system: a case study |
|
Design of X-bar&R control charts for monitoring quality of care for hypertension |
|
Shamsuzzoha, AHM
Collaborative Processes within Virtual Manufacturing Business Networks: How SMEs can be benefited? |
|
Shareefdeen, Zarook
Design and Analysis of a Simulated Methanol Production Plant |
|
Design and Optimization of a Biogas Digester for a Net-Zero Energy Community in Southwestern Ontario |
|
sharma, dibya
DYNAMIC RISK ASSESSMENT TOOL FOR SUPPLY CHAIN: A RISK QUANTIFICATION AND ANALYSIS FOR DECISION MAKING |
|
Sharma, Durgesh
Just in Time Implementation Issues in Indian Corrugated Packaging Industries |
|
Sharma, Saurabh
Particle swarm optimization for natural grouping in context for Group Technology application |
|
Sharma, Shalini
EducApp |
|
Sheikh, Farooq
Sniping as a Rational Strategy on Ebay |
|
Sheikhi, Mahdie
A Framework for Strategy Development in Small Companies The Case Study of a Telecommunication firm |
|
Sherbini, Khaled
LEED – based evaluation for submittal review during construction |
|
Sherif, Mohamed
Practical Risk Management Plan of Wi-Fi Network Deployment; Case Study |
|
Sheth, Nirav
Operational Improvement of Warehouse Operations |
|
Shiau, Jiun-Yan
A Decision Support Module for ERP System under VMI Collaboration |
|
Shibani, Abdussalam
IMPLEMENTATION OF TOTAL QUALITY MANAGEMENT (TQM) WITHIN THE INDUSTRY SECTOR IN THE UNITED ARAB EMIRATES |
|
Shih, Ping-Hsi
Airport Baggage Handling System Simulation Modeling Using SysML |
|
Shobana, Shakila
Lean Management Practices to improve supply chain performance of Leather Footwear Industry |
|
Shortt, Duane
Designed Experiment to Find the Optimal Combination of the Factors for the Coordinate Measuring Machine (CMM) to Measure Cylindricity of Engine Cylinder Bore |
|
Shu, Lianjie
Design of CUSUM Charts with Probability Control Limits |
|
Silva, Flavio
Product Lifecycle Management, Digital Factory and Virtual Commissioning: analysis of these concepts as a new tool of lean thinking |
|
Simon-Elorz, Katrin
EFFICIENCY ANALYSIS OF FINANCIAL ACTORS TO ACHIEVE THE FINANCIAL INCLUSION IN COLOMBIA |
|
Singh, Amandeep
Two Step Facility Layout Optimization of an Indian Bus Body Manufacturing Plant Using Artificial Bee Colony Algorithm and its Variants |
|
Singh, AMARJIT
Procurement Management and Construction Methods for the Installation of Pavement Monitoring Systems in Airport Pavements |
|
Singh, Rohit
DYNAMIC RISK ASSESSMENT TOOL FOR SUPPLY CHAIN: A RISK QUANTIFICATION AND ANALYSIS FOR DECISION MAKING |
|
Singh, Sanjeet
Network DEA Efficiency Improvement Under Constant Sum of Inputs/Outputs |
|
Singh, Varimna
Optimization Modeling for Production, Inventory and Distribution of Perishable Items: A Review |
|
Sinha, Aman
DYNAMIC RISK ASSESSMENT TOOL FOR SUPPLY CHAIN: A RISK QUANTIFICATION AND ANALYSIS FOR DECISION MAKING |
|
Smiddy, Renée
Simulation Helps Local Grocery Store Compete Effectively Against Large Chains |
|
Sofia, Guebli
Refined Descriptive Sampling in multidimention |
|
Solak, Senay
Cybersecurity Investment Optimization with Risk: Insights for Resource Allocation |
|
Soria-Comas, Jordi
Co-Utility: Self-Enforcing Protocols Without Coordination Mechanisms |
|
Sorooshian, Shahryar
Green manner factors for logistics |
|
Literature review on the applicability of lean |
|
Späthe, Steffen
Smart City Logistik Erfurt (SCL): ICT Support for managing Fully Electric Vehicles in the Domain of inner City Freight Traffic |
|
Spertino, Fillipo
A Maximum Power Point Tracker of Photovoltaic Arrays for Partial Shading Conditions |
|
Srikantan, Arvind
OUNano A novel method and framework to optimize the utilization of digital communication channel and storage resources for textual based transactions |
|
srinivasan, Gopalan
Hedging against uncertain supply and demand using options in a single period framework |
|
Inventory replenishment for profit maximization over a finite horizon when cost changes |
|
Srinivasan, Jayakanth
Modeling Distributed Product Development Processes in Small and Medium Enterprises |
|
Stamure, Iveta
Practical aspects of sustainable construction in Latvia |
|
Staube, Tatjana
Practical evaluation of multifunctional nanocoatings technology commercialization in Latvia |
|
Stephan, Jad
Unsustainability in emergent systems: a case study of road transport in Greater Beirut Area. |
|
Subramoniam, Suresh
Markov Chain applied for the prediction of Non Performing Assets in a Non Banking Financial institution |
|
Sulaiman, Zuraidah
Effects of Intrinsic and Extrinsic Attributes on Purchase Intention: An Experiment on Manufacturer vs. Store Brand Coffee Products |
|
Suman, Sidharth
Role of Electrospun Zno-Nio Metaloxide Nanocomposite Fibers for Sensor Applications Varun Nair SRM University Chennai, India |
|
Sumanth, Chiraag
OUNano A novel method and framework to optimize the utilization of digital communication channel and storage resources for textual based transactions |
|
SURATKON, AZEANITA
Geo-disasters in Relation with Climate Change: Student's Perspective via a Course-embedded Project |
|
Suresh, M.
Selection of New Product: A Case of Clay-Pot-Refrigerator |
|
Survillo, Anna
The Electricity Sector Modernization Directions for the Development of Latvian National Economy |
|
Suwaidi, Aisha
Design of X-bar&R control charts for monitoring quality of care for hypertension |
|
Syarif, Umar
Metaheuristics for Two-stage No-Wait Flexible Flow Shop Scheduling Problem |
|
Modeling and Simulation of Queuing Systems Using Arena Software: A Case Study |
|
Taha, Kamal
Integrating Supply Chain Data Standards in Healthcare Operations and Electronic Health Records |
Top |
Tahan, Mohammadreza
Condition-based maintenance of gas turbine based on short-Term performance prognostic |
|
Tahar, Razman
Literature review on the applicability of lean |
|
Taheri, Javad
NURSE-PHYSICIAN RATIO IN AN INTERNAL MEDICINE RESIDENCY CLINIC |
|
Tairi, Abdelaziz
The golden rules for ecoinnovative design by using the TRIZ theory |
|
Tajdin, Ali
Effect of information technology (IT) to deploy Customer Relationship Management (CRM) in bank |
|
location and strengthening of cellular network sites in order to maximize the net revenue and coverage space in critical situation |
|
Tan, Wei Ping
Incorporating Postponement in an Offshoring Strategy - A case study of a Singapore-China cross border manufacturing supply chain |
|
Tandon, Mansi
Optimal Control Policy to Production and Inventory System with Price-Dependent Demand in Segmented Market |
|
Tarakci, Hakan
On a stochastic model of an unreliable production system with outsourced maintenance |
|
Tasleem, Muhammad
Empirical Study of the Impact of Software Quality Practices on Product Performance in Engineering Firms in Pakistan |
|
Integrated Role of TQM and Technology Management in Organizational Sustainability |
|
The Impact of Employee Satisfaction and Service Quality on Perceived Firm's Performance in High Contact Service Industry |
|
Tasweer, Syed
Empirical Study of the Impact of Software Quality Practices on Product Performance in Engineering Firms in Pakistan |
|
Tayeb, Hachemi
Markovian approach to improve the reliability and the availability of the Algerians refineries |
|
Tayisepi, Nicholas
Development of a System for Designing Customised Dental Implants |
|
Tebbikh, Hicham
Faces Detection in Color Image VS Gray Scale |
|
Teixeira, Leonor
Improving Tasting Processes in the Food Industry using ICT |
|
Tenali, Shyam
Implementing Lean Six Sigma to improve the ratio of admissions to placements in an academic year: Statistical and Psychological case study of a technical institute. |
|
Automating Field Motor and Irrigating Systems for better crop yield |
|
Testa, Mariapaola
A Preliminary Proposal to Include Capacity Constraint in the Multi-product EOQ Model Using Hybrid Systems and Integer Linear Programming |
|
Teymourian, Ehsan
Intelligent Water Drops Algorithm on Parallel Machines Scheduling |
|
Resource Management For Workflows In Cloud Computing Environment Based On Group Technology Approach |
|
Tezuka, Masaru
Inventory-Thumbnails: An Effective Data Visualization System for Monitoring Inventories |
|
Maintenance Schedule Optimization Based on Failure Probability Distribution |
|
Thaba, Sebonkile
Challenges hindering development of small scale of biodiesel Production in South Africa |
|
The Effectiveness of Micro Financing Rural Women in Limpopo Province OF South Africa |
|
Used Vegetable Oil (UVO) As Feedstock for Biodiesel Production in South Africa |
|
Thakkar, Jitesh
Minimizing Delay in Infrastructure Project using an integrated approach of Interpretive Structural Modeling and Bayesian Belief Network |
|
Thongmak, Mathupayas
Antecedents and Consequences of the Intention of Young Consumers to Pirate or Buy Copyright Products |
|
TOBITA, RUMI
Developing an Effective ESP Curriculum for Engineering Students |
|
Toth, Peter
New Possibilities for Adaptive Online Learning in Engineering Education |
|
TOUHAMI, LALLA SAMIRA
Management of Maintenance using FMEA model: Case study of Roadheaders (Alpine miners AM50) |
|
Tran, Tuananh
Development of a Framework to Customize Design Methodologies for Product Service Systems |
|
Trujillo Díaz, Johanna
Making Decisions in transactional costing for transportation logistic function Horizontal Integration Strategy |
|
Making decisions in transactional costing for transportation logistic function- Horizontal Integration Strategy |
|
Tsou, Yu-Ling
A Decision Support Module for ERP System under VMI Collaboration |
|
Ubadike, Osichinaka
Impact of Big Data Analytics to Nigerian Mobile Phone Industry |
Top |
Ucan, Kirac
Redesigning the Material Supply System of the Automotive Suppliers Based on Lean Principles and An Application |
|
Ul Haq, Ikram
A Review on Big Data Analytics and Security |
|
Ulusoy, Gündüz
Proactive Project Scheduling in an R&D Department: A Bi-Objective Genetic Algorithm |
|
Umahaeyo, Christopher
Optimizing SIMT Architecture using CUDA |
|
Umude-Igbru, Oviri
Acceptability of Lean Six Sigma in a Developing Economy: Results from Exploratory Research in Nigerian Consulting Companies |
|
Ünal, Yusuf Ziya
Developing spreadsheet models of Holt-Winter methods and solving with Microsoft Excel solver and differential evaluation technique: An application to tourism sector |
Top |
Unver, Mehmet
A Fuzzy Integral Approach for Determining the Degree of Effect of the Global Warming on the Cities of Turkey |
|
UPADHYE, NITIN KUMAR
Just in Time Implementation Issues in Indian Corrugated Packaging Industries |
|
Upreti, Girish
Production Sequencing in a Fifth Wheel Industry: Case Study |
|
Urabe, Shintaro
Inventory-Thumbnails: An Effective Data Visualization System for Monitoring Inventories |
|
V, SESHAGIRIRAO
MULTI OBJECTIVE OPTIMIZATION OF DRILLING PARAMETERS OF CFRC COMPOSITES BY USING GRA METHOD |
|
Vale, Angelica
The Musculoskeletal Disorder Effects on the Use of Single and Dual Monitor Workstations |
|
VASQUEZ BERNAL, OSCAR
Certification of Professional Engineering in Colombia: From the multi-criteria analysis approach and innovation |
|
VELASQUEZ, ANDRES
Making Decisions in transactional costing for transportation logistic function Horizontal Integration Strategy |
|
Making decisions in transactional costing for transportation logistic function- Horizontal Integration Strategy |
|
Venkannah, Santaram
Anthropometric Data for Equipment Design in Small Island Developing States |
|
Autonomous Messenger Using Propeller LED Display. |
|
Venkatadri, Uday
A Two-Phase Optimization Approach to Recyclable Product Collection using Compaction Trailers |
|
Victoire, Marie Vanessa
Anthropometric Data for Equipment Design in Small Island Developing States |
|
Villanueva, Rachel
Innovative Ergonomic Design of a Tricycle and Risk Assessment |
|
Set-up Time Reduction at Stamping Station 1 of Tri-R Allied Industries Incorporated |
|
Villarreal, Bernardo
A Scheme to Achieve Distribution Agility |
|
Achieving Competitiveness Through Setup Time Reduction |
|
Reducing Operating Costs by Integrating a Food Supply System |
|
Vishwanathan, Janani
COOLING MATTRESS AND APNEA DETECTOR WITH STIMULATOR FOR HIE NEONATES |
|
Wala, Riddhi
Detection of Fracture in Skull by Hit-or-Miss Transformation |
Top |
Wang, Chih
A systematic approach to select the optimal project portfolios for green manufacturing: An empirical study on TFT-LCD fabrication processes |
|
Wang, Hsiao-Fan
A Recommender System for the Optimal Combination of Energy Resources with Cost-benefit Analysis |
|
Analysis of the Optimal Combination of Renewable Energies for an Enterprise |
|
Application of Soft Computing Techniques to Forecast Monthly Electricity Demand |
|
Assessment of the Solar Power Investment with Feed-in Tariff Policy: A Case in Taiwan |
|
Dynamic Industrial System Approach to the Sustainability Development of National Economy |
|
Watson, Jeffrey
Simulation Helps Local Grocery Store Compete Effectively Against Large Chains |
|
Wei, Kang
Literature review on the applicability of lean |
|
Wickremasinghe, Nimesha
Life Cycle Assessment of Sri Lankan Chocolate Industry |
|
Williams, Edward
Simulation Helps Local Grocery Store Compete Effectively Against Large Chains |
|
Wong, C. S.
Scheduling of Multi-Die Operations with Multiple Maintenance Tasks |
|
Woodall, W.H.
Design of CUSUM Charts with Probability Control Limits |
|
Wu, Tai-Hsi
Applying Environmental DEA to Evaluate the Environmental-Economic Efficiency for APEC Economies |
|
Wunck, Christoph
Extracting Features from Injection Moulding Process Signals Using Wavelet Analysis |
|
Xambre, Ana Raquel
Improving Tasting Processes in the Food Industry using ICT |
Top |
Xavier, Akhil
Sensor Wireless Network Based Bank Monitoring System Using LabVIEW™ |
|
Yacout, Soumaya
Diagnosis of machining outcomes based on machine learning with Logical Analysis of Data |
Top |
Yadavalli, Venkata Seshachala Sarma
Explicit location covering problems |
|
The optimal routes for the vessels to transport empty containers under different shipping service networks design |
|
Yahya, Muibat
Fixed Bed Column Study for Pb (II) adsorption using Calcium-Alginate Treated Shea Butter Husk (TSBH) |
|
YAMINA, FEDALI
The approach of Risk Analysis in the sector of food-processing |
|
Yang, Xu
Eco-Labeling Programs And Their Successful Design |
|
Yannakoudakis, Emmanuel
The architecture of the ARISTON expert system for vocational counselling |
|
Yannakoudakis, Helen
The architecture of the ARISTON expert system for vocational counselling |
|
Yanto, Yanto
Anthropometric Study of Indonesian University Students in Jakarta |
|
Yassaei, Shahla
The analysis of critical factors of success (failure) for Iran nanotechnology research & development via fuzzy map approachFuzzy mapping |
|
Yavari, Mahsa
Economic production quantity model under stochastic break down with new approach |
|
Yawalekar, Sneha
Spend Analysis: A Step for Procurement Efficiency |
|
Yeh, Chun-Wu
Applications of production and delivery concept to vendor-buyer coordination problem |
|
Yilmaz, Hamid
Team-oriented assembly line balancing problem: A new design |
|
YILMAZ, Mustafa
Team-oriented assembly line balancing problem: A new design |
|
YILMAZ, Ömer Faruk
To define service level in an integrated model for warehouse and inventory planning by utilizing heuristic solution: An example. |
|
Younes, Mohammad
An Artificial Neural Network Meta Model For Availability Of Systems In Series With Buffers Under Imperfect Repair |
|
Optimum Allocations for Reliability and Maintainability for Series System with Buffers under Imperfect Repair |
|
Yousef, Hossam AlDeen
Photoelectric properties of Selenium |
|
yousif, hussain
Optimization of Corrosion Factors in Some Alloys Produced from steel Chips Using Taguchi Method |
|
Yu, Huan
Module-based Healthcare Platform Planning for Designing Customized Healthcare Service Pathways in Hospitals |
|
Yu, Ting
A General Framework for Lean Transformation of Hospitals |
|
Yusuf Kolia, Hasban
The Impact of Globalization on Total Factor Productivity of the Manufacturing sector in Pakistan |
|
Zagré, Juste Thierry
New method of risks management for end-of-life of large-scale projects: Case of extraction projects |
Top |
Zaidin, Norzaidahwati
A Development of Satisfaction-Loyalty and Reputation Relationship Model Using Performance Measurement Approach of the Private Medical Clinics' Services |
|
Effects of Intrinsic and Extrinsic Attributes on Purchase Intention: An Experiment on Manufacturer vs. Store Brand Coffee Products |
|
The Impact of Enterprise Risk Management Practices on Malaysian Public Higher Educational Institution Performance: A Literature Review |
|
Zaim, Selim
Developing spreadsheet models of Holt-Winter methods and solving with Microsoft Excel solver and differential evaluation technique: An application to tourism sector |
|
ZAINAL ABIDIN, ANA SAKURA
Design Capabilities Development in A Malaysian Automotive Vendor Company |
|
Zakuan, Norhayati
A Development of Satisfaction-Loyalty and Reputation Relationship Model Using Performance Measurement Approach of the Private Medical Clinics' Services |
|
Effects of Intrinsic and Extrinsic Attributes on Purchase Intention: An Experiment on Manufacturer vs. Store Brand Coffee Products |
|
The Impact of Enterprise Risk Management Practices on Malaysian Public Higher Educational Institution Performance: A Literature Review |
|
Zarouni, Noura
Design of X-bar&R control charts for monitoring quality of care for hypertension |
|
Zarrin, Mansour
Improved Trust Prediction in Business Environments by Z-Numbers and Metrics of Maturity, Distance, and Density |
|
Zeid, Abe
CAD Tools for Sustainable Design |
|
Zeinal Hamadani, Ali
Investigating the effect of human factors on warranty cost under sales delay conditions |
|
Multi-objective availability optimization of a system with repairable and non-repairable components |
|
Zeltins, Namejs
Planning and managing problems of energy and energy efficiency at regional and district level in Latvia: case study |
|
Zeng, Youzhi
Review and New Insights of the Car-Following Model for Road Vehicle Traffic Flow |
|
Zhang, Linda L.
Defining open configuration |
|
Module-based Healthcare Platform Planning for Designing Customized Healthcare Service Pathways in Hospitals |
|
Supply Chain Planning with Integrated Decision Making in Resource Allocation |
|
Zhang, Ning
Review and New Insights of the Car-Following Model for Road Vehicle Traffic Flow |
|
Zhang, Yao
Interdependence-based risk analysis methodology in project risk response |
|
ZHOU, Gengui
Research on Cascading Failure Model for Supply Chain Network |
|
Zhuo, Yueran
Cybersecurity Investment Optimization with Risk: Insights for Resource Allocation |
|
Zied, Hajej
A production planning optimization for multi parallel machine under withdrawal right |
|
Production/Maintenance Optimization problem with random repair time |
|
Zighed, Lilia
Morphological characterization and optimisation of porous silicon films for photovoltaic application |
|
Zisis, Stavros
Adoption of Operations Improvement Methods in the Greek Engineering Sector |
|
Zolfaghari, Hossein
Multi-objective availability optimization of a system with repairable and non-repairable components |
|
| |
Top |
