Halal Supply Chain Panel
September 14, 2021, Time: 4:00 – 5:45 pm
Dwi Agustina Kurniawati, S.T., M.Eng., Ph.D.
Department of Industrial Engineering
Universitas Islam Negeri Sunan Kalijaga
Prof Suhaiza Zailani
Professor of Supply Chain and Logistics, Faculty of Business and Accountancy
University of Malaya
Prof. Dr. Marco Tieman
Professor of Supply Chain Management
ELM Graduate School
Dr. Marco Tieman is a full professor with ELM Graduate School, Help University, in Malaysia. He conducts research in halal procurement, halal supply chain management, and halal risk and reputation management. He teaches the subject Supply Chain Management and Halal Business Management. He won academic awards for his groundbreaking research in halal purchasing and halal supply chain management. He is a member of the Senior Editorial Advisory Board of the Journal of Islamic Marketing (Emerald, United Kingdom) and an Editorial Board Member of the International Journal of Islamic Marketing and Branding (Inderscience Publishers, Switzerland). He is the author of ‘Halal Business Management: A guide to achieving halal excellence’, providing practical advice and guidance how best to organise and upscale halal business operations.
Prof. Dr. Marco Tieman is also the founder and Chief Executive Officer of LBB International, a supply chain strategy consultancy and research firm. He has been advisor to businesses and governments in Asia, Europe, and the Middle East.
He has a MSc in Industrial Engineering and Management Science from the University of Twente (the Netherlands) and a PhD in Business Management from the Universiti Teknologi MARA (Malaysia).
Prof. Irwandi Jaswir
Research Coordinator at the Halal Industry Research Center, International Islamic University Malaysia (IIUM), Kuala Lumpur
Prof. Iwan Vanany
Profesor in Industrial Engineering, ITS, Indonesia. One of his research interests is in halal supply chain
Dr. Mohamed Syazwan Ab Talib
Assistant Professor of Logistics Management, UBD School of Business and Economics, Universiti Brunei Darussalam
Prof. Dr. Ir. Yandra Arkeman, M. Eng
Professor of Agricultural Industrial Technology
IPB University, Bogor, Indonesia
Renewable Energy Panel
September 15, 2021, Time: 4:00 – 5:45 pm
Dr. Dia Milani
research scientist and team leader
Commonwealth Science and Industrial Research Organization (CSIRO)
New South Wales, Australia
Dr Milani is a research scientist and team leader at the Commonwealth Science and Industrial Research Organization (CSIRO) since 2017. He currently leads a research project titled “A novel platform for highly-integrated solar heat in carbon capture technology” funded by Coal Innovation, Dr Milani is a research scientist and team leader at the Commonwealth Science and Industrial Research Organization (CSIRO). In this project, Dr. Milani and his team raise the bar and propose a novel concept to completely solarise carbon capture technology and move away from the power plant steam cycle.
Prior to this project, Dia was the key researcher working on advanced aqueous Ammonia carbon capture technology pilot plant commissioned and operated by CSIRO at Vales Point power station in Central coast, NSW, Australia. Before joining CSIRO, Dia was the energy team leader and Post-doctoral Research Fellow in LMS at the University of Sydney. He was involved in several research- based projects mostly related to the renewable hybridization in desalination, industrial eco-parks, and supercritical CO2 Brayton power cycles.
Dia was awarded his PhD in Chemical & Biomolecular Engineering from The University of Sydney in 2012. He holds a Master degree in Environmental Engineering Management from the University of Technology, Sydney (UTS) and a Bachelor degree in Mechanical Engineering (Power division) from the University of Aleppo. Dia received several awards during his studies, including member of the Dean’s List at UTS in 2006 for his outstanding academic achievements, the Alexander Hugh Thurburn Scholarship in 2008, and the innovation and enterprise award from the School of Economic and Business at the University of Sydney in 2011.
Associate Professor Ali Abbas ALI ABBAS
Associate Professor Director – Waste Transformation Research Hub
Chair – Australian Circular Economy Conference
School of Chemical and Biomolecular Engineering
Faculty of Engineering and Information Technologies
The University of Sydney
Sydney, NSW, Australia
Associate Professor Ali Abbas is Director of the Waste Transformation Research Hub at the University of Sydney. He has 20 years’ experience in the field of Process Systems Engineering, with expertise in process intensification and design, techno-economic feasibility, process scale-up / optimal operation, with applications in low-emissions technologies, waste, clean energy, biotechnology and biomedical systems. In recent years, Ali has been working on circular economy transitions, identifying ways to translate the circular economy principles into practice. Ali is the Chair of the Australian Circular Economy Conference. Ali provides consultations to industry and Government, and is developing breakthrough deep technologies across multiple industry sectors in his capacity as founding Director of Scimita Ventures Pty Ltd and Trofica Pty Ltd.
Prof. Deendarlianto Aan
Universitas Gadjah Mada
- Universitas Gadjah Mada, 14 years
- Professor. Full-time, Jan 2021 – Present . 6 months, Yogyakarta, Indonesia – Universitas teaching, scientific research in the field of multiphase flow (mechanical engineering), and community service
- Lecturer, 2007 – Jan 2021 . 14 years – Research and teaching in the field Multiphase Flow and Computational Fluid Dynamics
- Director, Centre of Energy Studies, Gadjah Mada University, Jan 2013 – Present . 8 years 6 months – Pusat Studi Energi UGM, Yogyakarta
- Research Fellow, Forschungszentrum Dresden-Rossendorf, Jul 2009 – Jun 2011 . 2 years – Conducted the experiment and CFD modelling on the occurrence of counter-current flow limitations (CCFL) in a Pressurized Water Reactor (PWR)
- The University of Tokushima, PhD, Multiphase Flow, Mechanical Engineering, 2013 – 2006 – Activities and Societies: Head of The Association of Indonesian Students at Tokushima
- The University of Tokushima, Master of Engineering (M.Eng.), Mechanical Engineering, 2001 – 2003
Dr. Budi Hartono
Associate Professor and the head of the Mechanical & Industrial Engineering Department
Faculty of Engineering
Universitas Gadjah Mada (UGM)
Dr. Budi Hartono is an associate professor and the head of the Mechanical & Industrial Engineering Department, Faculty of Engineering, Universitas Gadjah Mada (UGM). He received his Ph.D. from the Industrial & Systems Engineering Department, National University of Singapore (NUS), with the NUS and AUN-SEED joint scholarship program. Dr. Budi Hartono is the Chair of the Gadjah Mada Project Management Research Group (Gama-Pro) and a former director of the Project Management Institute Indonesia, Yogyakarta Branch.
Dr. Hartono’s research interests include project management, risk and complexity analysis, cognitive ergonomics, and systems approach.
Dr. Nguyen Duc Tuyen
Department of Power System, Electrical Engineering School
Hanoi University of Science and Technology
Dr. Nguyen Duc Tuyen received the Undergraduate Degree in Electrical Engineering at Hanoi University of Science and Technology in 2006, the Master Degree in 2009, and Ph.D. in 2012 at Shibaura Institute of Technology, Tokyo, Japan. From 2012 to 2015, he was also a researcher at Shibaura Institute of Technology, Tokyo, Japan, and a part-time Lecturer at Chiba University and Tokyo Wildlife College, Japan. From 2015 to 2017, he worked at Tokyo University of Science, Japan. From 2017 to 2018, he conducted the research at the National Institute of Industrial Science and Technology, Japan. Since 2018, Dr. Nguyen Duc Tuyen is a lecturer in the Department of Power System, Electrical Engineering School, Hanoi University of Science and Technology. Dr. Tuyen published more than 100 journal and conference papers. He is an active reviewer of IEEE, IET, MDPI, IEEJ, Springer, Elsevier, etc., reviewing hundreds of papers since 2009.
Dr. Jafri Mohd Rohani
School of Mechanical Engineering
Faculty of Engineering
Universiti Teknologi Malaysia
Skudai, Johor, Indonesia
Dr Jafri Bin Mohd Rohani is senior lecturer at School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor. He graduated PhD from Universiti Teknologi Malaysia (UTM) in 2014, obtained his M.Sc (Industrial Systems Engineering) from Ohio University, USA in 1995 and B.Sc (Industrial Enginnering), New Mexico State University, USA (1988. He has been teaching at UTM specializing Industrial Engineering courses for more than 30 years. He is now supervising undergraduate and postgraduate students as part of academic responsibilities.
He is very active in journal and conference publications with a total of 23 Indexed Journals and 6 of them from ISI Index Journal. His H-Index is currently stands at 8. He has published 1 research book and 2 book chapters. The total research funding received so far is RM 569,500 with the amount of RM 106,400 as Principal Investigator. With his experience, he actively participated in various Scientific, Technical committees and Conferences. He has been invited as 2 keynote speaker at International Conferences and invited speaker at Universitas Sebelah Maret, Surakarta, Indonesia. He is appointed as Editorial Boards at one local journal and one international journal. He has also being appointed as Technical Committee at various International and Local conferences. He is also appointed as NIOSH expert consultant to assist NIOSH staffs to conduct research and training activities. He is also currently engaged with DOSH, Malaysia to carryout OSHCIM Implementation Project in Construction Industry with a total consultancy services of RM 748,000.
He is involve in various committee at School of Mechanical Enginnering and also become resource person in Occupational and Safety Health at UTM. He is now project coordinator for 2 MOUs with NIOSH Malaysia and Universitas Sebelas Maret, Surakarta, Indonesia.
September 16, 2021, Time: 4:00 – 5:45 pm