Conference Proceedings – 2018 Paris
ID 1 Bio ethanol Production from the Landfill Organic Waste Fraction
M. Manyuchi, C. Mbohwa and E. Muzenda,University of Johannesburg, South Africa
ID 2 Bio stabilization of Jatropha Curcas Cake to Bio fertilizers through Vermicomposting
M. Manyuchi, C. Mbohwa and E. Muzenda,University of Johannesburg, South Africa
ID 3 Feasibility of Treating Brewery Wastewater using Bio films
M. Manyuchi, C. Mbohwa and E. Muzenda,University of Johannesburg, South Africa
Chikwama,Harare Institute of Technology, Zimbabwe
ID 4 Improve an Emergency Medical System Capacity with Theory of Constraints
Bernardo Villarreal, Jenny Diaz Ramirez, Aracely Carranza, Gabriela Morales & Arturo Quezada,Universidad de Monterrey, México
Jose Arturo Garza Reyes, Derby Business School, UK
ID 5 Reduce Slow Moving Inventory of Convenience Stores: A Case Study
Bernardo Villarreal, Leslie Sosa, Jesus Vazquez, Estefanía Quintanilla, Mariana Herrera & Delia Villarreal,Universidad de Monterrey, México
ID 6 A Comparison of Ambulance Location Models in Two Mexican Cases
Jenny Díaz Ramírez, Edgar Granda, Bernardo Villarreal and Gerardo Frutos, Universidad de Monterrey, México
ID 7 A Multiple Criteria Approach for Defining the Ambulance System Structure: A Case Study
Jenny Díaz Ramírez, Edgar Granda & Bernardo Villarreal,Universidad de Monterrey, México
Yazmin Maldonado,Instituto Tecnológico de Tijuana, Mexico
ID 9 Sustainable Profitability of Iran’s Banks: Analysis of Policies Based on System Dynamics Approach
Mahdi Bastan and Sareh Akbarpour, University of Eyvanekey, Iran
Saeid Delshad Sisi,Clemson University, USA
ID 10 Clinical Risk Management: A System Dynamics Model
Mahdi Bastan, Elaheh Zadfallah and Alimohammad Ahmadvand,University of Eyvanekey, Iran
ID 11 A System Dynamics Approach to Analysis of Development Policies in Occupational Health and Safety Management System
Mahdi Bastan, Leila Azizi and Alimohammad Ahmadvand,University of Eyvanekey, Iran
ID 12 Implementation of six sigma in the construction projects. A Case Study of the Amman Building Construction.
Maha Alkasisbeh, Rabia Almamlook and Muteb Alshammari,Western Michigan University, USA
ID 13 Developing a Knowledge-Based Lean Six Sigma Model to Increase the Effectiveness of Healthcare Organisational Resources Management
Yousuf Nasser Al Khamisi, J. Eduardo Munive-Hernandez and M. Khurshid Khan,University of Bradford, UK
ID14 A new perspective for Ranking under a DEA cross-evaluation setting
Amar Oukil,Sultan Qaboos University, Oman
ID 15 An economic competitiveness analaysis of power generation plants
Ndala Yves Mulongo and Pule Kholopane, University of Johannesburg, South Africa
ID 17 A comparative analysis of the potential South African renewable energy sources using Analytical Hierarchy Process
Ndala Yves Mulongo and Pule Aaron Kholopane, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 18 An environmental impact of power supply systems: a comparative analysis Case study of the South African electricity sector
Ndala Yves Mulongo and Pule Aaron Kholopane, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 19 A sustainability analysis of the South African power supply systems by means of the weighted sum method
Ndala Yves Mulongo, Pule Aaron Kholopane and Clinton Aigbavboa, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 20 An Environmental Assessment of Energy Sector: A Critical Review
Ndala Yves Mulongo, Pule Aaron Kholopane and Clinton Aigbavboa, Faculty of Engineering and the Built Environment, University of Johannesburg, Auckland Park, South Africa
ID 22 Developing a Risk Assessment Model for non-Technical Risk in Energy Sector
Sahar Mohammad AL Mashaqbeh, J. E. Eduardo Munive Hernandez and M. Khurshid Khan, University of Bradford, UK
ID 23 Improvement of superficial hardness of S355JR steel by superficial plastic deformation
Abdeldjalil Bouri, Mounira Bourebia and Sihem Achouri,Industrial Technologies Research Center. CRTI., Algeria
Laouar.Lakhder, Badji Mokhtar University, Algeria
ID 24 Optimal Layout Design by Line Balancing Using Simulation Modeling (Case Study on MAA Garment and Textile Factory)
Aregawi yemane, Bahir dar institute of technology, Ethiopia
ID 25 Bottleneck Identification Using Time Study and Simulation Modeling OF Apparel Industries (Case Study on MAA Garment)
Aregawi yemane, Bahir dar Institute of Technology, Ethiopia
ID 26 Towards Increasing the Use of Pre Fabrication Components in Malaysia Construction Industry
Wan Nadzri Osman, Mohd Nasrun Mohd Nawi, Mohd Wira Mohd Shafiei and Radzi Ismail
School of Technology Management and Logistics, Universiti Utara Malaysia
School of Housing Building and Planning, Universiti Sains Malaysia
ID 27 The Integration of Marketing and Production Areas and its Impact on Organizations
José Leandro Miguel Neto, Universidade Lusófona de Humanidades e Tecnologias, Portugal
ID 28 Identification and Ranking of Innovation Management Factors in Petrochemical Companies Producing Polyethylene Products
Yadollah Sadeghi and Abbas Khamseh, Islamic Azad University, Iran
ID 29 Implementation of Lean Manufacturing System to Eliminate Wastes on The Production Process of Line Assembling Electronic Car Components with WRM and VSM Method[Case Study in Production Process of Daihatsu SIGRA Type 1.5 L 3NR-Ve, DOHC Dual VVT-i]
Muhammad and Yadrifil, Fakultas Teknik – Universitas Indonesia, Indonesia.
ID 30 Deep Groundwater Potential and Chemical Analysis Based on Well Logging Analysis at Kapuk-Cengkareng, West Jakarta, DKI Jakarta, Indonesia
J.W. Sihotang and M.S.D. Hadian, Padjadjaran University, Indonesia
T.E. Prayogi, Energy and Mineral Resources Ministry, Indonesia
ID 31 Derive Poker Winning Probability by Statistical JAVA Simulation
Mason Chen, Stanford OHS, USA
ID 32 The Role of Information Sharing on Supply Chain
Mahdie sheikhi, Hormozgan Regional Electric Company, Iran
Maryam Goodarzi, Islamic Azad University, Tehran Iran
Abozar Nowrozinejad and Saeede Sheikhi, Iran
ID 33 Design of a mobile reciprocating pumping system for platinum mines (…pneumatically powered)(CASE FOR ZIMBABWE).
Martha Simbisai Ganyani, University of Zimbabwe, Zimbabwe
Tawanda Mushiri and Charles Mbohwa, University of Johannesburg, South Africa
ID 34 Design for manufacture and assembly of a mini combine wheat harvester: Case of a developing nation – Zimbabwe.
Rumbidzai Prosper Jera, University of Zimbabwe, Zimbabwe
Tawanda Mushiri and Charles Mbohwa, University of Johannesburg, South Africa
ID 35 Design for manufacture and assembly of an automated mirror cutting machine.
Allen Hondo, University of Zimbabwe, Zimbabwe
Tawanda Mushiri and Charles Mbohwa, University of Johannesburg, South Africa
ID 36 Design for manufacture and assembly of an automated wood cutter: Case for developing country.
Ruvimbo Constance Mhlanga, University of Zimbabwe,Zimbabwe
Tawanda Mushiri and Charles Mbohwa, University of Johannesburg,South Africa
ID 37 A New Formulation for Machine Loading Problem In FMS (Flexible manufacturing System)
RRK Sharma, Indian Institute of Technology Kanpur, INDIA
ID 38 Relating Strategy of Core Company ToType of Analytics Used
Prof. RRK Sharma, Indian Institute of Technology Kanpur, INDIA
ID 39 AN ATTEMPT TO RESOLVE ENTITY AND INCREMENTAL THEORY OF CONSUMER BEHAVIOR
RRK Sharma, Indian Institute of Technology Kanpur, INDIA
ID 40 A Heuristic Policy for Outpatient Surgery Appointment Sequencing: Newsvendor Ordering
Farzaneh Mansourifard, Alzahra University, Iran
Parisa Mansourifard, Morteza Ziyadi and Bhaskar Krishnamachari, University of Southern California, USA
ID 41 A Game Theoretic Approach to Newsvendor Problems with Censored Markovian Demand
Parisa Mansourifard and Bhaskar Krishnamachari, University of Southern California, USA
Farzaneh Mansourifard, Alzahra University, Iran
ID 42 Percentile Policies for Inventory Problems with Partially Observed Markovian Demands
Farzaneh Mansourifard, Alzahra University, Iran
Parisa Mansourifard and Bhaskar Krishnamachari, University of Southern California, USA
ID 43 RELATING INNOVATION STRATEGY TYPES TO CULTURE
Prof. RRK Sharma, Indian Institute of Technology Kanpur, INDIA
ID 44 A Study on Benefits and Barriers of Implementing Building Information Modelling (BIM) in Malaysian Construction Industry
Mazri Yaakob, Jessie James, Mohd Nasrun Mohd Nawi and Kamaruddin Radzuan, Universiti Utara Malaysia, Malaysia
ID 45 Management Challenges in Product Configuration Projects
Sara Shafiee and Lars Hvam, Technical University of Denmark, Denmark
Yves Wautelet, Centre for Information Management, KU Leuven, Belgium
ID 46 A Granular Tabu Search Algorithm for a Real Case Study of a Vehicle Routing Problem with a Heterogeneous Fleet and Time Windows
Jose Bernal and John Willmer Escobar, Universidad del Valle, Colombia
Rodrigo Linfati, Universidad del Bío – Bío, Chile
ID 47 Matheuristic Algorithm for the Dynamic Problem of Location and Dispatch of Medical Emergency Vehicles
Juan Camilo Paz and John Willmer Escobar, Pontificia Universidad Javeriana Cali, Valle del Cauca, Colombia
Cesar Augusto Marín Moreno, Universidad Tecnológica de Pereira, Colombia
ID 48 Optimal investment decisions for recovery from disruptions in the decentralized supply chains
Nader Azad, Saint Mary’s University, Canada
Elkafi Hassini, Manish Verma, McMaster University, Canada
ID 49 Adoption of Cloud Computing in Manufacturing: SWOT Analysis
Balkrishna Eknath Narkhede and Rakesh D. Raut, National Institute of Industrial Engineering (NITIE), Mumbai, India
Vaibhav S. Narwane, Veermata Jijabai Technological Institute (VJTI), Mumbai, India
ID 56 Outsourcing and (Theoretical) Evolutionary Biology
Rob Dekkers, University of Glasgow, Scotland
ID 57 Analyzing Supply Chain Complexity Drivers using Interpretive Structural Modelling
Sujan Piya, Ahm Shamsuzzoha, Mohammad Khadem, Sultan Qaboos University, Oman
ID 58 Hybrid Wind & Solar LED Streetlight
Fayez Aldawi, Yanbu Industrial College, SAUDI ARABIA
ID 59 Energy Performance of Insulation Material in Houses and Buildings
Fayez Aldawi, Yanbu Industrial College, SAUDI ARABIA
ID 60 Designing ecofriendly Product-Service Systems (PSSs)through morphological reasoning
Nicolas Haber, Mario Fargnoli, Ahmad Ababneh and Massimo Tronci, Sapienza – University of Rome, Italy
ID 61 Managing customer requirements for an effective service implementation in a Product-Service System (PSS)
Nicolas Haber, Mario Fargnoli, Ahmad Ababneh and Massimo Tronci, Sapienza – University of Rome, Italy
ID 62 CREATION OF AN AUTOMATED WAREHOUSE MANAGEMENT SYSTEM
Johannes Mapokgole and Tengen Thomas, Vaal University of Technology, South Africa
ID 63 WAYS ON HOW DIGITAL TECHNOLOGY CAN STREAMLINE SUPPLY CHAIN MANAGEMENT OF TODAY
Johannes Mapokgole and Thomas Tengen, Vaal University of Technology, South Africa
ID 64 WAYS ON HOW DIGITAL TECHNOLOGY CAN STREAMLINE SUPPLY CHAIN MANAGEMENT OF TODAY
Johannes Mapokgole and Thomas Tengen, Vaal University of Technology, South Africa
ID 65 DEVELOPMENT OF A SYSTEM FOR REDUCING TRAFFIC CONGESTION IN SOUTH AFRICAN METROPOLITANS
Johannes Mapokgole and Thomas Tengen, Vaal University of Technology, South Africa
ID 66 An Assessment of the Lean Deployment in the Mauritian Textile Industry.
Keshav Ramgoolam and Needesh Ramphul, University of Technology, Mauritius
ID 67 Using system dynamics approach to examine the impact of ERP and Lean on manufacturing performance
Thi Phuong Dung Ho, Arun Kumar and Nirajan Shiwakoti, RMIT University, Australia
ID 68 Optimal collection of two similar products from N ordered customers
Epaminondas G. Kyriakidis, Athens University of Economics and Business, Greece
Constantinos C. Karamatsoukis, Hellenic Military Academy, Greece
Theodosis D. Dimitrakos, University of the Aegean, Greece
ID 69 Maximization of profits in import activities through a hybrid algorithm based on fictional games with multiple suppliers
Adriana Moros Daza, Carlos Paternina and Carlos Otero, Universidad del Norte, Colombia
ID 70 Increase of fuel efficiency in a passenger road transportation company
Jenny Díaz Ramírez, Laura Armendáriz Santinelli, María Fernanda Salcedo Junco and David Castaños Güitrón, University of Monterrey, Mexico
ID 72 Strategic Alignment of Information Systems Flexibility with Organization’s Operational and Manufacturing Philosophy: Developing a Theoretical Framework
Somen Dey and R.R.K. Sharma, Indian Institute of Technology Kanpur, India
ID 73 Fuzzy logic control system in medical field
Brahmi Samira, Zermane Hanane, Batna 2 University, Algeria
ID 74 Proposal of Model on Preventive Measures to Landslide Disaster Occurrences in Penang State, Malaysia
Mohamad Ghozali Hassan, Che Azlan Taib and Muslim Diekola Akanmu, Northern University of Malaysia
Ahmad Afif Ahmarofi, Northern University of Malaysia, Malaysia
ID 75 Technological Integration and Sustainable Performance in Manufacturing Firms
Mohamad Ghozali Hassan, Muslim Diekola Akanmu, and Rushami Zien Yusoff, Northern University of Malaysia, Malaysia
ID 76 Redesign of the monthly report of key performance indicators of a Mexican brewery plant
Priscila Ocañas, Universidad de Monterrey, Mexico
ID 77 Integrating Business Process Management with Public Sector
George A. Papadopoulos, Euripides Kechagias, Panagiota Legga and Ilias Tatsiopoulos, National Technical University of Athens (NTUA) , Greece
ID 78 Measuring Profilometry System Optimization
Javier Cruz-Salgado and Noé Alcalá Ochoa, Centro de Investigaciones en Óptica, México
Sergio Alvarez-Rodríguez, Instituto Tecnológico JMMPH campus Lagos de Moreno, México
ID 79 Solutions to Overcome Current MCDM Limitations
Yasaman Parsia and Puteri Fadzline Muhamad Tamyez, Universiti Malaysia Pahang, Malaysia
ID 81 Automatic Fish Egg Counting System by Using Image Processing Technique
Muhamad Rohaizad bin Alias and Muhamad Khusairi bin Osman, Universiti Teknologi MARA, Malaysia
Nor Hazlyna Harun, Universiti Utara Malaysia, Malaysia
ID 83 Decisions on the Risk-averse Competing Firms under Enhancing Environmental Social Responsibility
Wei Zheng1, Bo Li and Junhong Yang, Tianjin University, Tianjin, China
ID 84 Video Game: Continuous Track Design
Jason Li, San Mateo High School, San Mateo, USA
Mason Chen, Stanford OHS, Palo Alto, USA
ID 85 Relating Flexibility, Scalability and Security Issues In Internet of Things (IoT) To Strategy of the Firm
RRK Sharma and Vinayak Drave, IIT KANPUR, India
ID 86 Predict NBA Team Winning Record
Mason Chen, Stanford OHS, USA
ID 87 Study Baseball Pitching/Swing Contact Quality
Mason Chen, Stanford Online High School, United States
ID 88 Choose Healthy Chocolate
Mason Chen, Stanford OHS, Palo Alto, USA
ID 89 Addressing the challenge of lean manufacturing sustainment with system dynamics modeling: a case study on apparel manufacturing in a developing country
Marc Haddad and Rami Otayek, Lebanese American University, USA
ID 90 Potential Utilization of CO2 after Biogas Upgrading
Jonathan Empompo Bambokela, Mohamed Belaid and Edison Muzenda, University of Johannesburg, South Africa
ID 91 A new multi-criteria product design concept evaluation with consideration of product architecture, process and supply chain design
Shidpoura, M. Shidpoura, University of Hormozgan, Iran
ID 92 A Robust Optimization Approach to an Inventory System with Emergency Lateral Transshipment
Hamed Tayebi, Islamic Azad University, Iran
Soraya Nemati, Noore Touba University, Iran
ID 93 A cross-border e-commerce logistics optimization model
Pei-Ju Wu, Jung-Hsuan Chang, and Ping-Yu Su, Feng Chia University, Taiwan
ID 94 Design Thinking in Product Configuration Projects
Sara Shafiee, Saeedeh Shafiee Nahrkhalaji, Lars Hvam and Niels Henrik Mortensen, Technical University of Denmark, Denmark
ID 95 Layout Improvement Method Selection for a Mass Production Facility
Uğur Baç and Turan Erman Erkan, Atılım University, TURKEY
ID 96 Proposal to Assess the Results of Service Modularization
Camila S. Mattos, Diego C. Fettermann, and Paulo A. Cauchick-Miguel, Federal University of Santa Catarina – UFSC, Brazil
ID 97 Process Centric Energy Modelling for Multinational Manufacturing Corporations
Munsamy, Mangosuthu University of Technology, South Africa
A.Telukdarie, University of Johannesburg, South Africa
ID 98 Product Modularization in the Architecture, Engineering and Construction (AEC) Industry
Sara Shafiee and Lars Hvam, Technical University of Denmark, Denmark
Poorang Piroozfar, University of Brighton, UK
ID 99 Evaluation of the electric bicycle as an alternative mobility in the city of Cuenca, Ecuador
Gustavo Alvarez, Mateo Coello, Andrés López and Santiago Ordoñez, Universidad del Azuay, Ecuador
ID 100 Role of Hospital Management on Minimization Risks of Nosocomial Infections
Yasaman Parsia and Puteri Fadzline Muhamad Tamyez, Universiti Malaysia Pahang, Malaysia
ID 101 Developing an Effective Maintenance Policy for Control Gates in Hydroelectric Power Plants
Burak Aktel and Demet Ozgur-Unluakin, Bahcesehir University, Turkey
ID 102 Predictive Model on the Severity of Musculoskeletal Disorder and Accidents of Truck Drivers in the Philippines
Ma. Janice J. Gumasing and Marcelli Elaine G. Pacheco, Mapua University, Philippines
ID 103 Corporate digital preparedness: A case study for a South African Private organization
Bertine Mulombo Mujinga and Nita Sukdeo, University of Johannesburg , South Africa
ID 105 A Six Sigma Methodology for Continuous Process Improvement – A Case of Bell Crank Pin Manufacturing System
Karthik Kumar and Mridula Sahay, Amrita Vishwa Vidyapeetham University, India
ID 106 Virtual Power Plant Basic Requirements for Integration of Distributed Energy Resources, Driven by Industry 4.0.
Oliver Nwauka, Arnesh Telukdarie and Prof. Johan Enslin, University of Johannesburg, South Africa
ID 107 Basic Considerations for Integration of Microgrid Systems
Oliver Nwauka, Arnesh Telukdarie and Prof. Johan Enslin, University of Johannesburg, South Africa
ID 108 The Reliability of 43D Diesel Locomotives on the Phalaborwa to Richards Bay Corridor
Theophilus Seletlo, Arnesh Telukdarie and Oliver Nwauka, University of Johannesburg, South Africa
ID 109 Evaluating the Impact of Total Productive Maintenance elements on a Manufacturing Process
Mthetheleli Joseph Kwaso and Arnesh Telukdarie, University of Johannesburg, South Africa
ID 110 Factorial Model Design for Business Process Variables
Medoh Chuks and Telukdarie Arnesh, University of Johannesburg, South Africa
ID 111 Decision-support for Business Process Optimization Modelling Framework Based on Industry 4.0 Enablement
Medoh Chuks and Telukdarie Arnesh, University of Johannesburg, South Africa
ID 112 Corrosion Management: A Case Study on South African Oil and Gas Company
Linda Njomane and Arnesh Telukdarie, University of Johannesburg; South Africa
ID 113 Application of Value Stream Mapping and Monte Carlo Simulation in a University Hospital
Leonardo Bittencourt de Souza, Guilherme Luz Tortorella, and Paulo A. Cauchick-Miguel, Federal University of Santa Catarina – UFSC, Brazil
Daniel Nascimento, Pontifícia Universidade Católica do Rio de Janeiro – PUC-RJ, Brazil
ID 114 Analysis of Total Quality Management (TQM) implementation in Small Medium Industries
Thomas Windharyanto Nugroho and Rahmat Nurcahyo, University of Indonesia, Indonesia
ID 115 Impact of Training on Maintenance Performance Effectiveness
Fatoni and Rahmat Nurcahyo, Universitas Indonesia, Indonesia
ID 116 A measurement instrument for manufacturing competitiveness of automotive industry parts suppliers in Mexico”
Luz María Valdez de la Rosa, Universidad de Monterrey, México
Luis Alberto Villarreal Villarreal, Universidad Autónoma de Nuevo León, México
Juan Baldemar Garza Villegas, Signux Group, México
ID 117 Real Options for Dealing with Uncertainty in Project Management: A Case Study of Moroccan Infrastructure Project
Jihane Gharib 1, Abdelaziz Berrado 2 and Loubna Benabbou 1
1 Team MOAD-SCM, 2 Team AMIPS, Department of Industrial Engineering
Mohamadia School of Engineers, Mohammed V University, Rabat, Morocco
ID 118 5S in Container Terminals – A Framework to Reduce Container Demand Uncertainty
Poojith V S, Vishnu K, Mridula Sahay, Amrita Vishwa Vidyapeetham University, India
ID 119 Assessing the customer value generation in the electricity utility industry
Lina Astrid Carvajal-Prieto and Milton M. Herrera, Universidad Piloto de Colombia, Colombia
Mauricio Uriona, Federal University of Santa Catarina, Brazil
ID 120 Optimal Control Theoretic Approach to Health Care Investment
Mustafa Akan, Doğuş Üniversitesi, Turkey
ID 121 Optimization model of imperfect preventive maintenance schedule for complex system with critical components
Danping Lin and Wenyan Guo and Hongtao Hu, Shanghai Maritime University, China
ID 122 GA-based Corrective Maintenance Scheduling for Port Facilities with Multiple Maintenance Modes
Danping Lin, Chen Chen and Daofang Chang, Shanghai Maritime University, China
ID 123 Customized preventive maintenance strategies for products sold with two-dimensional warranty
Dr. Fangqi Dong and Prof. Zixian Liu, Tianjin University, China
ID 124 The Influence of Leadership on Innovation: a Case Study in the Telecommunications Industry in South Africa
Pascalis Adams, Hannelie Nel and Annlizé Marnewick, University of Johannesburg, South Africa
ID 125 Advanced Manufacturing: The key to future competitiveness in the automotive industry
Mbongiseni Makhado and Nita Sukdeo, University of Johannesburg , South Africa
ID 127 Incision infection risk assessment in laparoscopic acute appendectomy based on dynamic fault tree
Mei Li and Zixian Liu, Tianjin University, China
ID 128 Personality of leaders of mass customization firms
Dhananjay Singh and R.R.K Sharma, Indian Institute of Technology, India
ID 129 Improved Layout for the Pallet Loading Problem using Mega-box representation
Deemah Aljuhani and Lazaros G. Papageorgiou, University College London), UK
ID 131 OPTIMIZING SUPPLY CHAIN NETWORK DESIGN WITH SALBP-E ASSEMBLY LINE ISSUE
Raji, Ibrahim. O. and Rossi, Tommaso, LIUC – Università Carlo Cattaneo, Italy
ID 132 Proposal of professional referential evaluating the performance of downstream supply chain in Moroccan automotive industry
Chouaib ELHAMMOUCHI and Abdellah ABOUABDELLAH, University Ibn Tofail, Morocco
ID 133 A STUDY ON RETENTION AND APPLICATION OF TRAINING INPUTS INCLUDING JOB SKILLS AND RULES BY EMPLOYEES OF SOUTHERN RAILWAY, TIRUCHIRAPPALLI, TAMIL NADU, INDIA
Victor Lazarus and Michael David Premkumar, Bishop Heber College, INDIA
ID 134 Exploitation of the forecasted need to pilot upstream logistics in Moroccan automotive industries
Rim SGHIOURI and Abdellah ABOUABDELLAH, University Ibn Tofail, Morocco
ID 135 An Evaluation of Human Resource Engagement Practices: An African Context
Medoh Chuks and Telukdarie Arnesh, University of Johannesburg, South Africa
ID 136 Cartesian Transformations of Polar Coordination
Kyuman Kim, CheongShim International Academy, South Korea
ID 137 Reverse Logistics Network Design for an E-Commerce Firm
Debadyuti Das and Rahul Kumar, University of Delhi, India
Manish Kumar Rajak, ShopClues, India
ID 138 Eco-driving techniques applied in a transport fleet in Ecuador: A case study with quantifiable and measurable techniques
Gustavo Alvarez Coello, Jorge Muñoz Falconí and Fernando Rivas Paz, Universidad del Azuay, Ecuador
ID 139 An investigation of deployment strategies of advanced process control system
L. Mpahlwa and A. Telukdarie, University of Johannesburg, South Africa
ID 141 Study of Service Operations of Metro: Action Research Embedded with Case Study
Niyazudeen Kamarudeen and Balan Sundarakani, University of Wollongong in Dubai, Knowledge Park, Dubai, UAE
Mohammad Nabhan, Director, Road & Transport Authority, Dubai, UAE
ID 148 Overall Efficiency Improvement of a Production Line by Using Yamazumi Chart: A Case Study
Subrata Talapatra, Sharif-Al-Mahmud and Imran Kabir, Khulna University of Engineering and Technology, Khulna, Bangladesh
ID 149 Advanced Generation NIOSH Automatically Deployable Rollover Protective Structure (AutoROPS)
Khaled Alkhaledi, Industrial and Management Systems Engineering Department, Kuwait University, Alkhalediya, Kuwait
Kenneth Means, Mechanical and Aerospace Engineering Department, West Virginia University, Morgantown, West Virginia, USA
Eugene A McKenzie, Jr., The National Institute for Occupational Safety and Health (NIOSH), Morgantown, West Virginia, USA
ID 151 Chick and Grower Feed Formulation at Farm Level in Ajmer District of Rajasthan
Joseph Longo and Rajesh Sharma, SK Rajasthan Agricultural University, India
Dinesh Jain, Collage of Veterinary and Animal Sciences, India
ID 152 Models of performance evaluation of spare parts inventory management
Oumaima Bounou, Abdellah El Barkanyb and Ahmed El Biyaalic, Sidi Mohammed Ben Abdellah University, Morocco
ID 154 Optimal Vendor-Buyer Cooperative Inventory Policy for Order Size Dependent Transportation Cost
Sharon Orengo, Md. Shahriar J. Hossain and Bhaba R. Sarker, Louisiana State University, USA
ID 155 Lean Manufacturing Application in Textile Industry
Leandro L. Lorente Leyva, Edwin P. Curillo Perugachi, Ramiro V. Saraguro Piarpuezan, Carlos A. Machado Orges, Edwin P. Ortega Montenegro and G. Javier Burgos, Universidad Técnica del Norte, Ecuador
ID 156 Skills development by training: case of the automated systems’ agents
BAKKARI Mohammed, KHATORY Abdellah, Sidi Mohamed Ben Abellah University, Morocco
ID 157 JIGSAW COOPERATIVE APPROACH IN PROFESSIONAL STUDIES: A CASE OF TOP TECHNICAL INSTITUTE
Dr. Prabhas Bhardwaj, Dr. Anil Kumar Agrawal, Dr. Yogesh Velankar, Ms Priya Singh4, Mr. Susheel Yadav, Mr Suchit Pandey, Mr. Amit Kumar Yadav and Mr. Deepak Gautam, Indian Institute of Technology (BHU), INDIA
ID 158 AUTONOMOUS CONTAINER CRANE TO SIMPLIFY CRANE OPERATIONAL BASED ON IMAGE PROCESSING AND DISTANCE CALCULATION
Wikandhana Rajasa, Septia Sari, Rasyid Fajar and Muhammad Habibie, Institut Teknologi Sepuluh Nopember, Indonesia
ID 159 Manufacturing Performance Improvement of Weather Strips using Six Sigma DMAIC Methodology: A case study
Pardeep Gupta, Aman Hooda and Ankesh Mittal, Sant Longowal Institute of Engineering & Technology, India
ID 160 A Robust Optimization Approach for Supply Network Design under Uncertainties
Carles Sitompul, Yogi Yusuf Wibisono, and Reynold Andika, Universitas Katolik Parahyangan, Indonesia
ID 161 Waste reduction through reallocation of goods in food retail companies
Larissa Janssen and Alfred Wulff, Jade University of Applied Sciences, Germany
Jürgen Sauer, Carl von Ossietzky University of Oldenburg, Germany
ID 162 Investigating the Awareness of Decision-Making Heuristics and Biases in the Selection and Definition of Infrastructure Projects
Mohamed Ali, Michael Emes, Raúl Leal, University College London, London, UK
ID 163 A Process Improvement Study in an Emergency Department Using Lean Methodology
Nirouz Abeidi, University of Benghazi, Libya
Ali Turkyilmaz, Nazarbayev University, Kazakhstan
Ozgur Uysal, American University of the Middle East, Kuwait
ID 164 Appointment Scheduling Optimization for Specialist Outpatient Services
K .M. Lee, KKH Ng and M. C. Cheng, The Hong Kong Polytechnic University, China
ID 165 Analysis of customer satisfaction: a case study of the banking sector in South Africa
Khathutshelo Mushavhanamadi and Joy Hope Mavimbela, University of Johannesburg, South Africa
ID 166 Exploring the significance of service quality in achieving customer satisfaction
Khathutshelo Mushavhanamadi and Casendra Sehlare, University of Johannesburg, South Africa
ID 167 Improvement of Fuzzy Classification Systems Using Metaheuristic (PSO and ICA) with Dynamic Parameter Adaptation in Fuzzy Environment
Samaneh Asghari Kenarsari, University of Eyvanekey, Iran
Alimohammad Ahmadvand and Hossein Eghbali, University of Eyvanekey, Iran
ID 168 Improving Multi-Organizational Team Integration using Organizational Strategies
Arina Binti Rahmat and Dr. Che Khairil Izam Che Ibrahim, Universiti Teknologi MARA, Malaysia
ID 169 An Intelligent Decision Support System for SMED and Its Application in Textile Industry
Onur Dogan, Ufuk Cebeci and M. Kursat Oksuz, Department of Industrial Engineering, Istanbul Technical University, Macka, Turkey
ID 170 Data Perspective of Lean Six Sigma in Industry 4.0 Era: A Guide to Improve Quality
Onur Dogan and Omer Faruk Gurcan, Department of Industrial Engineering, Istanbul Technical University, Macka, Turkey
ID 171 The Factors Affecting Knowledge Sharing Intention and Mediating Effect of Transactive Memory System
Omer Faruk Gurcan, M. Kursat Oksuz and Onur Dogan, Istanbul Technical University, Turkey
ID 172 Output Level Improvement in Small and Medium-Sized Manufacturing Enterprises with Regard to Factors Influencing Production-workers
Bhimasen Soragaon, B P Mahesh and Anandkumar R Annigeri, JSS Academy of Technical Education, INDIA
ID 173 Quality Improvement of Intermediate Shaft used in Steering Column through TQM: A Case Study
Ankesh Mittal and Pardeep Gupta, Sant Longowal Institute of Engineering & Technology, India
ID 174 SMART GRID: A MANAGERIAL PERSPECTIVE
RRK Sharma and Kamini Singh, IIT Kanpur, India
ID 175 IMPLEMENTATION OF LEAN MANUFACTURING FOR IMPROVING PRODUCTIVITY: A REVIEW OF CASE STUDIES
Ashok. K. Pundir, Bhawana Rathore and Rauf Iqbal, National Institute of Industrial Engineering, India
ID 177 Capacitated Chinese Postman Problem: A Case Study in Erzurum
Mustafa YILMAZ, Ataturk University, Turkey
ID 178 Solving the capacitated Single Allocation Hub Location Problem Using Genetic Algorithm
Fatima Zahraa GRINE, Oulaid KAMACH and Naoufal SEFIANI, National School of Applied Sciences of Tangier, Morocco
Vigneshwar Pesaru, ORMAE, India
ID 179 Technology Management for Different Types of Retail Formats: A Prospectus of IoT
Vinayak A. Drave and Prof. RRK Sharma, IIT Kanpur, India
ID 180 Study of the impact of Green practices on the performance of Supply Chain: collaborative approach.
Abdelwahed Echchatbi, Abdelkabir Charkaoui and Mohamed Dif El Idrissi, University Hassan First, Morocco
ID 182 Techno-Commercial and Compatibility Analysis of Energy Efficient Technologies in HVAC for Indian Scenario
Parth Mehta & Juneda Sayed, Veermata Jijabai Technological Institute, India
Balkrishna Narkhede, National Institute of Industrial Engineering, India
Mandar Tendolkar, Veermata Jijabai Technological Institute, India
ID 183 Suppliers as an important factor in the management of the sustainable supply chain in the food industry
Edgar Guillermo Rodriguez Guevara, Universidad del Valle, Colombia
ID 184 An Environmental Concrete with Algerian Concrete
Saida Kitouni, Constantine 3 University, Algeria
ID 185 Analytical study of capacities transfer decision among multinational subsidiaries taking into account the financial criteria
Mouna Benfssahi and Zoubir El Felsoufi, Abdelmalek Essaadi University, Morocco
ID 188 Quantifying the Life Cycle Cost of a High Pressure Grinding Roll in a Mineral Processing Plant
Njabulo Buthelezi, Annlizé Marnewick and Hannelie Nel, University of Johannesburg, South Africa
ID 189 Peformance Analysis of Dry Steam Geothermal Power Plant by Modeling and Optimization of Noncondensable Gas Removal System
Fano Alfian Ardyansyah, Universitas Gadjah Mada, Indonesia
ID 190 A Linear Programming Approach for Land Allocation of The Commercial Crops in A Plantation
Raveena S and Sunith Hebbar, Manipal Institute of Technology, MAHE, India
ID 191 Development of Variable Toll Pricing Strategy to Manage Traffic Congestion at Metro Manila Skyway
Queen Jean Flores, Bien Carlo Realon, Lindley Bacudio, and Giselle Joy Esmeria, De La Salle University, Philippines
ID 192 STAKEHOLDER MANAGEMENT: IMPACT OF VIEWING AN ORGANISATION AS A SINGLE STAKEHOLDER – EFFECTS OF INTERNAL DEPARTMENTS ON STATE OWNED COMPANIES: A CASE OF STATE WATER COMPANY IN SOUTH AFRICA
Eveth Nwobodo-Anyadiegwu, Charles Mbohwa, University of Johannesburg, South Africa
Shumba Lawrence, Johannesburg Water, South Africa
ID 193 Effect of Internal Environment in a Virtual Team
Ateequr Rahman, R.R.K. Sharma and Vinayak A Drave, Indian Institute of Technology, Kanpur, India
ID 194 Two Explorative Case Studies into the Role of Regional
Mohammed A. Aldossary and Rob Dekkers, University of Glasgow, Scotland
ID 195 The Impact of Valuation Heterogeneity on Equilibrium Prices in Supply Chain Networks
Alper Nakkas, University of Texas at Arlington, USA
Yi Xu, University of Maryland, USA
ID 196 A multi-objective approach to sustainable disaster waste management
Muhammad Salman Habib and Biswajit Sarkar, Hanyang University, South Korea
ID 197 A Sequential Guillotine Cut Heuristic to Design Insulating Envelopes
Andrés F. Barco, Universidad de San Buenaventura, Colombia
Michel Aldanondo and Élise Vareilles, Université de Toulouse, France
ID 198 An Engineering Perspective on the Design of Manufacturing Organisations
Rob Dekkers, University of Glasgow, Scotland
ID 200 Outsourcing of R&D in Biopharmaceutical Companies
Reza Radfar and Maryam Goodarzi, Islamic Azad University, Tehran, Iran
ID 201 Constructive Matheuristic Algorithms for Solving The Vehicle Scheduling Problem For Public Transportation With Multiple Depots
César Augusto Marín, Luis Miguel Escobar and Rubén Bolaños, Integra S.A., Colombia
John Willmer Escobar, Javeriana University, Colombia
ID 203 An efficient algorithm for work shift scheduling in the operation of massive transit systems
César Augusto Marín, Luis Miguel Escobar and Rubén Bolaños, Integra S.A., Colombia
John Willmer Escobar, University of Valle, Colombia
ID 204 Critical Success Factors for ERP Implementations : A Moroccan Case Study Mohamed-Iliasse Mahraz
Mohamed-Iliasse Mahraz, Loubna Benabbou, Abdelaziz Berrado, Mohammed V, University of Rabat, Morocco
ID 205 Additive ratio assessment for evaluating provinces of Turkey in terms of environmental indicators
Aslı Çalış Boyacı, Ondokuz Mayıs University, TURKEY
Ahmet Boyacı, Hitit University, TURKEY
ID 206 Patient satisfaction factors and their correspondence with hospital logistics activities
Youness Frichi, Fouad Jawab and Said Boutahari, Sidi Mohamed Ben Abdellah University, Morocco
ID 207 Keep it Simple – Using the Ishikawa to Identify Key Factors Leading to Inefficiency and Ineffectiveness of Employees and Management An Observational Study at the Largest Public Care Facility in South Africa
Charles Sambil Mukwakungu, Eveth Nkeiruka Nwobodo-Anyadiegwu, Nonzwakazi Mntambo, University of Johannesburg, South Africa
ID 209 Multiple Criteria Master Surgical Scheduling Problem: A Case Study
Amirhosein Mohsenigol, Mazandaran University of Science and Technology, Iran
Ashkan Mozdgir, N. Toosi University of Technology, Iran
Shabnam Bozorgzadeh, Iran University of Medical Sciences, Iran
Azin Samiei, West Tehran Islamic Azad University, Iran
Behnood Ghasriani, Islamic Azad University Central Tehran Branch, Iran
ID 210 The responsibility of the human factor in road accidents in Morocco under a systemic vision
Nassima LAARAJ, Imane MOUFAD and Fouad JAWAB, Sidi Mohamed Ben Abdellah University – EST, Morocco
ID 211 Lean Manufacturing and urgent orders: how it works?
Mariam Houti, Laila El Abbadi and Abdellah ABOUABDELLAH, Ibn Tofail University, Morocco
ID 212 A Review on Standards, Practices and Future Prospects of Project Management in a South African Context
Sambil Charles Mukwakungu, Matimba Davis Mabasa and Charles Mbohwa, University of Johannesburg, South Africa
ID 213 The dynamic simulation of the urban traffic: A literature review
Imane MOUFAD and Fouad JAWAB, Sidi Mohamed Ben Abdellah University – EST,, Morocco
ID 214 The integration of Lean Manufacturing tools in the Industry 4.0
Said El Manti, Laila El Abbadi and Nabil HMINA, Ibn Tofail University, Morocco
ID 217 The extent of the Urban Freight Transport system on the Road Safety
Nassima LAARAJ, Imane MOUFAD and Fouad JAWAB, Sidi Mohamed Ben Abdellah University – EST, Morocco
ID 218 Line Balancing in assembly line. A case study.
Michelle Eugenia Sánchez Barrientos, Valeria Argumedo Hinojosa, Fabiola Mercedes Arango García, Teresa Verduzco-Garza, Fernando González-Aleu & Jesús Vázquez, Universidad de Monterrey, México
ID 219 THE IMPACT OF LOCATION DECISION ON SMALL, MEDIUM, AND MICRO-ENTERPRISES (SMMEs) PERFORMANCE IN JOHANNESBURG
Eveth Nwobodo Anyadiegwu, Alice Lumbwe Kabamba and Prof. Charles Mbohwa, University of Johannesburg, South Africa
ID 220 Assessment of Employee Awareness and Understanding of Quality at the ABC Company
Sambil Charles Mukwakungu, Charles Mbohwa, University of Johannesburg, South Africa
ID 222 Urban Distribution Center: Mathematical model for the location in the center of the city of Fes
Maha Bennani, Fouad JAWAB and Driss AMEGOUZ, Laboratoire Productique Energie et Developpement Durable(LPEDD) Fès, Morocco
Abderrahman ELMHAMEDI and Yasmina HANI, Modélisation et Génie des Systèmes Industriels(MGSI), Montreuil, France
ID 223 Hospital logistics: an effective tool in improving the quality of care
Youness Frichi, Fouad Jawab and Said Boutahari, Sidi Mohamed Ben Abdellah University, Morocco
ID 224 The organisation of Healthcare transportation in Morocco: description of the current situation
Berrak Fatimazahae and Fouad Jawab, Sidi Mohamed Ben Abdellah University, Morocco
ID 225 Measuring and improving public bus transport performance in largest Morocco’s cities
Zehmed Karim and Jawab Fouad, Sidi Mohamed Ben Abdellah University (SMBAU), Morocco
ID 226 Modeling and optimal replenishment of bi-objective, green, and integrated EPQ model under the QC policy
Abolfazl Gharaei, University of Toronto, Canada
ID 227 Optimum Entrance Rate to Mechanical Assembly Line of RIO Vehicle in SAIPA Corporation
Abolfazl Gharaei, University of Toronto, Canada
Mohammad Ali Ashtari Jafari, Kharazmi University, Iran
ID 228 Lean Six Sigma application to improve a human resources process: a case study in a commercial and service company in Mexico
Luz María Valdez de la Rosa, Daniela Garza Gutiérrez and Paulina Hoyos Benítez, Universidad de Monterrey, México
ID 229 Optimum speed of conveyor in Mechanical Assembly Line of RIO Vehicle in SAIPA Corporation
Abolfazl Gharaei, University of Toronto, Canada
Mohammad Ali Ashtari Jafari, Kharazmi University, Iran
ID 230 Design of a global sourcing strategy to reduce assembly components cost: A case study.
Teresa Verduzco-Garza, Marcos Cisneros, Francisco Lopez and Daniela Santiago, Universidad de Monterrey, Mexico
ID 231 Multimodal transport integration strategy to import steel slabs. A case study.
Teresa Verduzco-Garza, Jorge Fernando Fonseca Sánchez, José Guadalupe Olvera Hernández, Bryan Raúl Rangel Martínez, Universidad de Monterrey, Mexico
ID 232 Assessing the Determinants of Cloud Computing Adoption for Educational Sector
Balkrishna Eknath Narkhede , Rakesh D. Raut and Ashok K. Pundir, National Institute of Industrial Engineering (NITIE), India
Vaibhav S. Narwane, Veermata Jijabai Technological Institute (VJTI), India
Bhaskar M. Bhandarkar, Indian Institution of Industrial Engineering, India
ID 233 Agent based modelling for a sustainable distribution network
Hajar DEQQAQ and Abdellah ABOUABDELLAH, Ibn Tofail University, Morocco
ID 234 Bi-objective multi-product model for planning rail-truck multimodal transportation: A case study
Aslı Çalış Boyacı, Ondokuz Mayıs University, TURKEY
Ahmet Boyacı, Hitit University, TURKEY
ID 235 Stochastic Optimization of Dairy Supply Chain Valorization Model by Considering Byproducts
S.Rozita Ebrahimi and Farid Khoshalhan, Industrial engineering department of K.N.Toosi University of technology, Iran
Hamed Ghaderzadeh, University of Kurdistan, Iran
ID 240 Using a data mining CRISP-DM methodology for rate of penetration (ROP) prediction in oil well drilling
Djamil Rezki and Leila Hayet Mouss, Batna 2 University, Algeria
Abdelkader Baaziz, Université d’Aix-Marseille, France
ID 241 The Implementation of management control in oil industry.
Abdelmadjid Ahmed OUAMAR, University of Boumerdes, Algeria
ID 242 Design and Build Risk Analysis to The Project Success
Hafnidar A. Rani, Muhammadiyah Aceh University, Indonesia
ID 243 Evaluation of Lean Six Sigma Implementation at Healthcare Sectors: A case Study of Two Tertiary Hospitals in Oman
Yousuf Nasser Al Khamisi, M. Khurshid Khan and J. Eduardo Munive-Hernandez, University of Bradford, Bradford, UK
ID 246 Design and Development of Wind Tunnel by 3D Printing
Bhatt; S. Sadique, State University of New York Polytechnic Institute, USA
Ali, Lawrence Tech University, Michigan, USA
ID 247 Prospective Synergy of Biogas Upgrading Technologies with Carbon Capture and Sequestration (CCS) Techniques
Jonathan Empompo Bambokela, Edison Muzenda and Mohamed Belaid, University of Johannesburg, Doornfontein, South Africa
ID 248 Logística humanitaria. Una revisión del estado del arte Humanitarian logistics. A state of art review
Andrés Felipe León-Villalba, Universidad Católica de Colombia, Colombia
ID 249 Investigating the Impact of Teamwork Quality on Project Effectiveness in a Multiple-project Management Setting
Dr. Lina Al Shatti, Kuwait Oil Company (KOC), Kuwait
ID 250 The masking effect due to industrial noise and applying the method of the level of interference with speech
Dr. ABDERREZAK Hocine and Dr. DALIA Abdallah, Badji Mokhtar Annaba University, Algeria
ID 251 Towards Sustainable Society: Design of Food Waste Recycling Machine
Shada Bennbaia Aseel Wazwaz Alaa Abujarbou, Qatar University, Doha, Qatar
ID 252 Applications of the Vehicle Routing Problem to Personnel Transport in Morocco
Ilham Kissani, Abderrazak El Boukili and Rida El Boustani, School of Science and Engineering, Al Akhawayn University, Ifrane, Morocco
ID 254 Development of New Payment Method for Industrialised Building System (IBS) Project in Malaysian Construction Industry Using Analytic Hierarchy Process (AHP)
Natasha Dzulkalnine, Mohamed Nor Azhari Azman and Khuan Wai Bing, Sultan Idris Education University, Perak, Malaysia
Abdul Talib Bon and Edie Ezwan Mohd Safian, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia
ID 255 Bus Stop Redesign for Enhancing Pleasurable Emotions
Hasna Maulina, Yani Herawati, Paulina Kus Ariningsih, Universitas Katolik Parahyangan, Bandung, Indonesia
ID 257 IMPLEMENTATION OF LEAN & AGILE STRATEGY IN PLANT AND EQUIPMENT PROCUREMENT IN TERTIARY INSTITUTIONS
Bashir Garba.I,Muhammad Dauda, F.O Anafi , Bello Sabo, Ahmadu Bello University, Zaria, Nigeria
ID 258 Predictive Model on the Severity of Musculoskeletal Disorder and Accidents of Truck Drivers in the Philippines
Ma. Janice J. Gumasing and Marcelli Elaine G. Pacheco, Mapua University, Philippines
ID 259 The criteria’s of sustainable product development and organizational performance.
Hj Mohd Akhir Hj Ahmad, University Utara Malaysia, Malaysia
ID 260 Sustainable supplier selection problem using Fuzzy Inference System and Balance Score Card
Ali Yousefi and Kaveh Fahimi, Km 9th Karaj Special Road, Iran
ID 261 Why wait for citations? Let’s rank authors using co-author network based centrality metrics
Sahar Maqsood, Muhammad Arshad Islam, Muhammad Tanvir Afzal, Nayyer Masood, Capital University of Science and Technology, Islamabad Pakistan
ID 262 5S Implementation in Workplace – a Conducive Environment Enhancing Motivation in Educational Institutions
Ashok G Verghese, K.Viswanathan and Pon Ramalingam, Hindustan Institute of Technology and Science Chennai,India
ID 263 Balancing a robotic spot welding line: Robust optimization model and exact solution method
Ali Yousefi and Kaveh Fahimi, Km 9th Karaj Special Road, Iran
ID 264 Simultaneous Competitive Supply Chain Network Design with line balancing under uncertainty
Ali Yousefi and Kaveh Fahimi, Km 9th Karaj Special Road, Iran
ID 266 STRATEGIC COLLABORATIVE PLANNING MODEL AND ITS APPLICATIONS IN ECUADOR, MEXICO AND CUBA
Neyfe Sablón Cossío and Erik Orozco Crespo, Universidad Técnica de Manabí, Ecuador
Manuel Lázaro Pérez Quintana and Ruth I. Areas Gutierrez, Amazon State University, Ecuador
Horacio Bautista Santos and Fabiola Sánchez Galván, Instituto Tecnológico Superior de Tantoyuca, México
ID 267 New Product Quality and Timing under Competition
Professor Sudhakar D. Deshmukh, Northwestern University, U. S. A.
ID 269 A leader-follower game for competitive supply chain network design
Kaveh Fahimi and Hilda Saeidi Nejad, Iran University of Science & Technology, Terhan, Iran
ID 270 A roadmap to competitive supply chain network design
Kaveh Fahimi and Hilda Saeidi Nejad, Iran University of Science & Technology, Terhan, Iran
ID 274 Workup of reverse logistics practices in the management of industrial plastics baskets in a poultry company of Barranquilla
Jennifer Morales Guerrero, Cristian Solano and Janethxy Roncallo Ortiz, Universidad del Atlántico, Colombia
ID 275 Discrete event simulation for resource programming: case of Ecuadorian textile industry
Erik Orozco Crespo, Neyfe Sablón Cossio and Ramiro Vicente Saraguro Piarpuezán, Técnica del Norte University, Ecuador
ID 276 WEEE MANAGEMENT: APPROACH OF REVERSE LOGISTICS IN HIGHER EDUCATION INSTITUTIONS
Luis Augusto Valencia Rivera and Claudia Cecilia Peña Montoya, Universidad Santiago de Cali, Colombia
ID 277 Designing Framework for Development of Lean ERP System
Abdulwahab Al Maimani, Al Muhandis Integrated Services, Oman
ID 278 How to improve the patient flow process in outpatient services of a hospital: A problem structuring and lean management approach
Annabelle Glaize and Christine Di Martinelly, IESEG, France
Alejandra Duenas, ICN Business School, France
ID 279 Modeling and Performance Analysis of a Flexible Manufacturing Cell with Machine Failures
Abdulmajeed Dabwan, Husam Kaid, Abdulrahman M. Al-Ahmari, and Tariq Aziz., King Saud University, Saudi Arabia
ID 280 Performance of Phase II Approaches for Monitoring Multivariate Multiple Linear Profiles based on Estimated Parameters
Ahmad Ahmadi Yazdi and Ali Zeinal Hamadani, Isfahan University of Technology, Iran
Amirhossein Amiri, Shahed University, Iran
ID 281 EVOLUTION AND PROSPECTS OF HORIZONTAL DIRECTIONAL DRILLING
Abderrahmane MELLAK, K. BENYOUNES, University of Boumerdes, Algeria
EL HEIT, University Mouloud Mammeri, Algeria
ID 282 An Investigation into the Causes of Continuous Resistance to the Implementation of a Centralised HR Support Services within a Global Mining House
Stella Zoë Mulombe, Regenesys Business School, RSA
Chipo Mugova, Mancosa Graduate School of Business, RSA
ID 283 Model to Model Transformation toward Angular 2 Application
Mouad El Omari, University Mohammed First Oujda, Morocco
Mohammed Erramdani, Morocco
ID 284 The Potential Positive Impact of Depreciation on the Value Added Tax (VAT) in the Saudi Arabian Housing Sector
Basil Omar Al-Sasi, King Abdul Aziz University, Saudi Arabia
ID 285 Open Innovation Stages in the Service Sector
Pimprabha Sirito and Maruf Hasan, The University of New South Wales (UNSW), Australia
ID 286 Discharge Times of Ultrafine and Superfine Powders in a Short Riser Circulating Fluidized Bed at Different Humidification Conditions
Emad Abdelghani, El-Minia University, Egypt
Mohammed Hakami, Yanbu Industrial College, Saudi Arabia
ID 288 TOTAL PRODUCTIVE MAINTENANCE: A TOOL TO REDUCING DOWNTIME IN A PLANT.
Yusuf Sanni O., University of Lagos, Akoka, Nigeria
ID 289 Resource Allocation: A moderator of the relationship of recycling strategy and organizational performance
Ahmed M. Attia, Effat University, KSA
ID 290 Neural Network Predictive Control of the System Unified Power Flow Controller (UPFC)
LAROUCI, University of Sciences and Technology of Oran, Algeria
ID 291 Modeling make-to-order supply chains as queueing networks
Amir Azaron, Kwantlen Polytechnic University, Canada
ID 292 Preparation and Evaluation of Carbon Synthesized by Chemical Activation of Mango Seeds
Alicia Chen and Emily Chen, Dublin High School, CA, USA
ID 293 Applying Demand Aggregation to Improve Forecasting Accuracy
Estefanía Quintanilla, Mariana Herrera, Delia Villarreal & Bernardo Villarreal, Universidad de Monterrey, México
ID 294 A SOPHISTICATED PROCEDURE FOR MANAGING CUSTOMER SERVICE IN BANKING SECTOR OF BANGLADESH
Dr. Mohammad Babul Hasan and Md. Rajib Sheik, University of Dhaka, Bangladesh
ID 295 A method to measure Overall Material Efficiency in Semiconductor Backend Manufacturing Environment
Tang Ho Hwa and Ang Xinhao, Infineon Technologies Asia Pacific Pte. Ltd, Singapore
Ku Swee Hiong, Infineon Technologies (Malaysia) Sdn. Bhd, Malaysia
Gao Xing, Infineon Semiconductors (Wuxi) Co. Ltd, China
ID 296 Effects of Operational Activities on World Energy Consumption: Data Envelopment Analysis Application
Oludolapo Akanni Olanrewaju, Durban University of Technology, South Africa
ID 297 Effects of Operational Activities on World Energy Consumption: Data Envelopment Analysis Application
Oludolapo Akanni Olanrewaju, Durban University of Technology, South Africa
ID 298 Optimization of the Turnaround Maintenance (TAM) Performance by TAM Model to Gas Plants in Case Study for Gas Turbines
A.Elwerfalli, M. K. Khan and Munive-Hernandez, University of Bradford, UK
ID 299 Supply chain model for deteriorating products with advanced preservation policy
Muhammad Waqas Iqbal, Biswajit Sarkar, Mitali Sarkar, Rekha Guchhait and Suman Kalyan Sardar, Hanyang University, South Korea
ID 300 Application of Big Data Analytics for Recommending V93K Tester Platform Focus Area with High Test Time and Index Time Deviation
Tang Ho Hwa, Koh Mei Hwei and Romero Sunshine Ander, Infineon Technologies Asia Pacific Pte. Ltd, Singapore
ID 301 Determining job complexity in semiconductor manufacturing for the prediction of indirect workforce requirement
Pamela Lin, Marcus Low, Nicolas Delagneau and John Kuan, Infineon Technologies Asia Pacific Pte Ltd, Singapore
ID 302 Internet of Things for Different Types of Retail Formats
Vinayak A. Drave and Prof. RRK Sharma, IIT Kanpur, India
ID 303 Performance Measurement and Management for Facilities Management Companies
Abdulwahab Al Maimani, Al Muhandis Integrated Services, Oman
Mazin Al Hasni, Golden Leaf, Oman
ID 304Performances evaluation of production system taking into account machine failure and free shipping option
Turki Sadok and Nidhal Rez, Université de Lorraine, France
ID 306 A Study on the Effects of the Future Value of Fares for Airline Revenue Management
H.C.C. HO and F.C.K. YEUNG, The Hong Kong Polytechnic University, China
ID 307 Banking Soundness System: A System Dynamics Model
Mohammad Bagheri Mazrae and Alimohammad Ahmadvand, University of Eyvanekey, Iran
Azam Ghezelbash, Ferdowsi University of Mashhad, Iran
ID 308 Evaluating Measurement System by Gauge Repeatability and Reproducibility
Bahar Sennaroglu and Ozlem Yurtsever, Marmara University, Turkey
ID 309 A METHODOLOGY FOR RELATIVE PERFORMANCE COMPARISON OF UNDERWATER ACOUSTIC SENSOR NETWORKS AND LEGACY EXPENDABLE SONAR SENSORS
Mark A. Gammon and Stephane Blouin, Defence R&D Canada – Atlantic Research Centre, Canada
ID 310 Investigation of Poor Service Delivery of Road Infrastructure
Nokulungan Xolile Mashwama, Didibhuku Thwala and Clinton Aigbavboa, University of Johannesburg, South Africa
ID 311 Identifying and Ranking the Effective Factors of Business Intelligence on the Organizational Strategic Decisions
Mahdiar Rahro and Alireza Soleimanmafi, Tarbiat Modares University, Tehran, Iran
ID 312 Agent-based Modeling of Emergency department
Anahita Sadri and Abbas Seifi, Amirkabir University of Technology, Iran
Mahdi Rezai, Iran University of Medical Sciences, Iran
ID 314 A reinforcement learning approach to AGV dispatching
James T. Lin and Meng-Wei Hsyu, National Tsing Hua University, Taiwan
ID 315 An Innovative Tool to Design around Patent
Mohammad. S. Eslamipour and M.R. Moradi, Mapna Generator Co, Iran
ID 316 Design & Fabrication of 3-axis CNC Milling (Project Based Learning in Mechanical Design)
Bandar Zahid, Khalid Ababtain, Fayyaz Nadeem and Hazim Moria, Yanbu Industrial College, Saudi Arabia
ID 317 Determining issues affecting food waste: Case study of the South African meat processing industry
Phumelele Kanyi, Clinton Aigbavboa, Ndala Yves Mulongo, University of Johannesburg, South Africa
ID 318 A sustainability assessment of biofuel supply chain
Yohanes Kristianto, Aalborg University Copenhagen, Denmark
Liandong Zhu, University of Vaasa, Finland
Yliopistonranta, Vaasa, Finland
Wuhan University, China
ID 319 Impact of Organizational Culture on Service Quality
Yonela Gantsho and Nita Sukdeo, University of Johannesburg , South Africa
ID 320 Factors that influence consumer behavior in the purchase of durable household products
Elias Thabiso Mashao and Nita Sukdeo, University of Johannesburg , South Africa
ID 321 Supervision of an Industrial Process of Milk Production using Fuzzy Logic
Hanane Zermane, Samira Brahmi, Naima Zerari, Rachad Kasmi, University Batna 2, Algeria
ID 322 Finding the Optimal Path of Airline Flight Plans using Simulation
İlkün Orbak, Maltepe University, Turkey
Âli Yurdun Orbak, Uludag University, Turkey
ID 323 A new approach for optimal obsolescence forecasting based on the random forest (RF) technique and meta-heuristic particle swarm optimization (PSO)
Yosra Grichi, Thien-My Dao and Yvan Beauregard, École de technologie supérieure, Canada
ID 324Discrete Event Simulation for chemotherapy patient flows
Dang Khoi Pham and Christine Di Martinelly, IESEG School of Management, France
Alejandra Duenas, ICN Business School (CEREFIGE), France
ID 325 Desirability Function Approach for Selection of Facility Location: A Case Study
Prasad Karande, Veermata Jijabai Technological Institute, India
Prasenjit Chatterjee, MCKV Institute of Engineering, India
ID 326 Factors that affect implementation of green public procurement in local government: A case study in the city of Johannesburg Municipality
Ernest Mutenda and Pule Kholopane, University of Johannesburg, South Africa
ID 327 DESIGN AND OPTIMIZATION OF PLASTIC SHREDDER BLADE
Sekar L.R, Student, Rajalakshmi Engineering College, India
ID 328 Workers Productivity in Construction Sites : A Critical Review
Ghazi Moh’d Al-Abbadi and George Agyekum-Mensah, Coventry University, UK
ID 329 Procedure for the ergonomic risks management, with a process approach, in organizations
Yolaine Cisneros Rodríguez, Marisol Pérez Campaña, Claudia Diaz Leyva and Miguel A. Cisneros Prieto, University of Holguin, Cuba
ID 330 Implementation of Accelerated Degradation Testing Methods using R-Excel interface
Seong-joon Kim, Chosun University, South Korea
Suk Joo Bae, Byeongmin Mun, and Chuljin Park, Hanyang University, South Korea
ID 331 Integrated Knowledge Loss Risk Management Model in the Project Environment
Shteinbrekher Daria, National Aerospace University, Ukraine
ID 332 Robust Optimization for Number of AGVs Required
James T. Lin and Bih-Wen Chan, National Tsing Hua University, Taiwan
ID 333 Evaluation of Control Activities through Diffuse Compensatory Logic in a Hospital Entity
Leudis Orlando Vega de la Cruz, Mayly Torres Álvarez and Ileana Tapia Claro, University of Holguin, Cuba
ID 334 Managing capabilities for research centers in the UK’s manufacturing sector: from literature review to a conceptual framework
Olga Uflewska, T.C. Wong and Michael Ward, University of Strathclyde, UK
ID 335 CONCEPTUALIZATION OF THE CURRENT STATUS OF THE IMPACT EVALUATION OF HUMAN RESOURCES TRAINING IN ORGANIZATIONS
Claudia Díaz Leyva, Clara Marrero Fornaris, Carlos Nuñez Cruz and Yolaine Cisneros Rodríguez, University of Holguin, Cuba
ID 336 Optimization of production in workshops with reconfigurable machine tools
Pedro Díaz Leyva, Company BRASCUBA Cigarrillos SA, Cuba
Claudia Díaz Leyva, Aylín Pupo Pérez and Mayly Torres Álvarez, University of Holguin, Cuba
ID 338 Modeling, Building and Management User Profiles: UPMS (User Profiles Management Service)
Taous Iggui and Abdelkamel Tari, University of A. Mira of Bejaia, Algeria
Hassina Nacer, University of Science and Technology-Houari Boumediene USTHB, Algeria
ID 339 Outsourcing Evolution and State-of-the Art Practices: Empirical Analysis of Oil and Gas Industry
Nnamdi Ogbuke, University of Central Lancashire, UK
ID 340 Supply chain system dynamics modeling and simulation considering fundamental risks
Paria Rostamipour Dolatabadi, Kaveh Mohammad Cyrus and Abbas Seifi, Amirkabir University of Technology, Iran
ID 343 Industrial management in the automotive sector
Hassan KHADIRI, Brahim HERROU, Sidi Mohamed Ben Abdellah University, Morocco
ID 344 Calculating the effect of maintenance human error factors on total cost
Rogelio Emmanuel Jáuregui Miramontes and Yuri A. Lawryshyn, University of Toronto, Canada
ID 345 Vulnerability Analysis of Water Distribution Networks Using Betweenness Centrality and Information Entropy
Seyed Ashkan Zarghami, Indra Gunawan, Frank Schultmann, The University of Adelaide, Australia
ID 346 The Relationship between Internal and external Integration of Supply Chain and Operational Performance
Yandra Rahadian Perdana, Wakhid Slamet Ciptono and Kusdhianto Setiawan, Universitas Gadjah Mada, Indonesia
ID 347 Introducing Statistical Process Control Techniques into a Headliner Subassembly Process
Torie G. Rose, Lawrence Technological University, USA
ID 350 An Integrated Framework to Support Process Supply Chain in Tourism Sector (Case in West Java Destination)
Achmad H Sutawidjayaa, Lenny C Nawangsarib, Universitas Mercu Buana, Indonesia
ID 351 Patient-centered Deep Learning Model and Diagnosis Service for Persons with Alzheimer’s Disease
Robin G. Qiu, Big Data Lab, Division of Engineering and Info Science, Penn State, Malvern, PA 19355, USA
Jason L. Qiu, Methacton School District, Eagleville, PA 19403, USA
ID 353 A Proposed Combined Renewable Energy System for Train
Mohammad Azazur Rahman, Mohammad Woli Ullah, Muhammad Mostafa Amir Faisal, Saif Hannan, Abdullah Al Azha, Md Mohiuddin Soliman, and Ahmed Afif Monrat, International Islamic University Chittagong, Bangladesh
ID 355 Decision making models for managing performance using Influence Diagrams: A solution for single vs multi strategy organizations
Mohammad Hassan Abolbashari, Atefe Zakeri and Elizabeth Chang, University of New South Wales, Canberra, Australia
ID 356 An algorithm model for solving the single-period inventory transportation problems with deterministic demand in construction industry
Mohd Kamarul Irwan Abdul Rahim, Rosman Iteng and Mohd Akhir Ahmad, Universiti Utara Malaysia, Kedah, Malaysia
ID 357 Achieving Procurement Excellence Through A Bayesian Network Modelling Approach
Mohammad Hassan Abolbashari, School of Business, University of New South Wales, Australia
ID 358 TQM practices in automobile industry of Northern India-An Empirical Investigation
Harwinder Singh, Guru Nanak Dev Engineering College, Ludhiana, Punjab, India
Jagdeep Singh, Surjit Kumar Gandhi, Dr. B. R. Ambedkar National Institute of Technology Jalandhar, Punjab, India
ID 359 Manufacturing Optimization -How effective are shop floor improvement methods?
Patrick Pötters, Robert Schmitt, Quality Management at RWTH Aachen, Steinbachstraße, Germany
Bert Leyendecker, University of Applied Sciences Koblenz, Germany
ID 360 Stress Behaviour of Composite Materials with Natural Fibers from the South Pacific
Nicholas Lambrache, John Pumwa, Ora Renagi, Brian N’Drelan, PNG University of Technology, Morobe, Papua New Guinea
Lidia Olaru, Jesta Group, Montreal, Quebec, Canada
ID 361 Failure of Francis Water Turbines due to Flow Variations in Papua New Guinea
Nicholas Lambrache, John Pumwa, Dapsy Olatona, Mihail Ursul, Brian N’Drelan, PNG University of Technology, Morobe, Papua New Guinea
ID 362 Preventive maintenance optimisation: towards a new model
Salima Hammadi, Amal Boukili, Brahim Herrou, Mohammed El hammoumi, Sidi Mohamed Ben Abdellah University, Fez, Morocco
ID 363 Methodology for optimizing the use of NDT in predictive maintenance
Amal Boukili, Mohammed El Hammoumi and Said Haouache, Sidi Mohamed Ben Abdellah University, Fez, Morocco
ID 365 Determinants of Sustainable Continuous Improvement (Kaizen) Implementation in Malaysian Automotive Part Supplier SMEs
Mohd Ghazali bin Maarof and Shahryar Sorooshian, Universiti Malaysia Pahang, Pahang Darul Makmur, Malaysia
Suhaila binti Abdul Hamid, Universiti Sains Islam Malaysia, Negeri Sembilan, Malaysia
ID 366 The Microfinance Institutions Rating According to the Performance of their Lending Process: An Intuitionistic Fuzzy TOPSIS Evaluation
Yousef Lamrani Alaoui and Tkiouat Mohamed, Mohamed V University of Rabat Mohammadia School of Engineering, Morocco
ID 367 A Novel Evolutionary Model for Improving Big Data Security
Ibtissame KANDROUCH, Nabil HMINA, Habiba CHAOUI, National School of Applied Sciences Kenitra, Morocco
ID 368 Integrating Quality Control Charts with Maintenance: A Brief Literature Review
Gasim Mohamed Abdelrahman, Mohammad Shamsuzzaman and Imad Alsyouf, University of Sharjah, United Arab Emirates
ID 369 Dynamic Programming Approach to Unit Commitment Problem for Kuwait Power Generations
Nadine Awadah, Rawan AlShikh Ali, Shaikha AlBaijan, Ghalia Al-Qallaf, Muneerah Al-Hassawi, and Suat Kasap, American University of the Middle East – AUM, Egaila, Kuwait
ID 370 Redesigning a Retail Store Based on Association Rule Mining
Dalal Al Attal, Mariam Naser, Nourah AlBaghli, Nourah Al Muhaimeed and Sarah Al Awadh, American University of the Middle East, Eqaila, Kuwait
ID 371 Scenario reduction approach for a resilient supply chain network
Zahra Moghimi, Mahdi Bashiri, Shahed University, Tehran, Iran
ID 372 Robust hub location problem with uncertain inter hub flow discount factor
Reza Rahmati, Mahdi Bashiri, Shahed University, Tehran, Iran
ID 373 An EOQ Inventory Model for Items Consisting of Components
Nadezhda Kozlovskaya, Nadezhda Pakhomova, Knut Richter, Saint Petersburg State University, St. Petersburg, Russia
ID 374 Improvement of Diabetes Awareness: Applying Six Sigma to Increase Teachers Awareness Regarding Diabetic Children in Primary Schools in Kuwait
Fatemah Al-Juhaim, Layali Al-Dhefeeri, Rawan Al-Shatti, Shaikha AlDaboos, and Walid Smew, American University of the Middle East (AUM), Eqaila, Kuwait
ID 375 Developing Thai and English Braille Fonts by using FontForge.
Sathaphon Cheratummakool, Punthat Siriwan, Princess Chulabhorn’s College Chonburi, Thailand
ID 376 HOW CAN SUSTAINIBILITY STRATEGY OF SUPPLYCHAIN MANAGEMENT IN UNIVERSITY?
Lenny Ch Nawangsari, Ahmad Hidayat Sutawidjaya, Mercu Buana University, Jakarta, Indonesia
ID 377 A self-starting Risk-adjusted AFT-based control chart for monitoring the survival time of patients
Elahe Tighkhorshid, Amirhossein Amiri, Farzad Amirkhani, Shahed University, Tehran, Iran
ID 378 Application of Geographically Weighted Regression Analysis on World’s Gasoline Prices Model
Tuti Purwaningsih, and Devina Gilar Fitri Ayu Sumardi, Universitas Islam Indonesia, Yogyakarta, Indonesia
ID 379 Indonesia’s Crime Rate Analysis Using Spatial Analysis Method
Lucky Suryo Wicaksono, Tuti Purwaningsih, and Hafizhan Aliady, Universitas Islam Indonesia, Yogyakarta, Indonesia
ID 384 Feasibility Testing of Fused Filament Fabrication 3D printing for Automobile Parts Production
Jaikishan Shankarlal Wadhawa, Prof. Jayant S Karajagikar, College of Engineering Pune, India
ID 385 Identifying the Critical Communicational Factors Relations in EPC Projects: A DEMATEL Framework
Sara Sajedi, Naser Shams Gharneh, Amirkabir University of Technology, Tehran, Iran
ID 386 Scheduling of Traffic Lights
Irem Unal, Hasan Can Tumantozlu, Elvan Merve Ak, Eren Turkoglu, Serol Bulkan, Banu Calıs, Marmara University, Istanbul, Turkey
ID 387 Polynomial analysis of Markovian web service
Baya Takhedmit1, Katia Bachi and Karim Abbas3, University of Bejaia, Algeria
ID 388 Comparative assessment of conventional and alternative leather tanning processes from a life cycle perspective
Zia Uddin Md. Chowdhury, Md. Ariful Islam Juel, and Md. Abul Hashem, Khulna University of Engineering & Technology, Khulna, Bangladesh
ID 389 Integrating a Supply Chain with Vendor Managed Inventory and Joint Replenishment Policies
Milad Khajehnezhad, University of Wisconsin-Milwaukee, Milwaukee, USA
ID 390 Use of data mining and neural network algorithms to optimize the implementation of value engineering in projects
Alimeh Mofidi Naeini and Mohamad Bozorgi, Iran
ID 391 Study of the cause-and-effect relationship between the six axes of the new Balanced Scorecard model: Application of the DEMATEL method for the case of a Moroccan Medical Analysis Laboratory
Faiza AZOUR, Haj EL MOUSSAMI, Latifa EZZINE, Moulay Ismail University,Toulal, Meknes, Morocco
ID 392 Queuing model for improving airport passengers treatment process
Fouad Jawab, Mohammad Khachani, Kawtar Akoudad, College of Technology, Road of Imouzzer, Fez, Morocco
ID 394 Time series to improve sales planning in a supply chain. Case study.
Kawtar Akoudad, Fouad Jawab, College of Technology, Road of Imouzzer, Fez, Morocco
ID 395 Digital Human Modeling and Simulation to Correct Work Postures in Dentistry
Danah Ahmad, Sarah Hashem, Sarah AlAttal, Deema AlQemlas, Kareem Abbady, and Suat Kasap, American University of the Middle East – AUM, Egaila, Kuwait
ID 396 Application of the wavelet transform in rotating machines diagnosis and fault diagnosis
Abou Elanouar, M. Elamrani, B.Elkihel, F.Delaunois, ENSAO, Morocco
ID 397 Developing a Conceptual Framework to Improve Healthcare Quality Management in Oman
Yousuf Nasser Al Khamisi, University of Bradford, Bradford, UK
ID 398 Aligning the Maintenance Strategy with the Business Context to eliminate hurdles in translating the Business Strategy
Peter Muganyi, Charles Mbohwa, University of Johannesburg, Johannesburg, South Africa
ID 399 Presenting a method uing system dynamics approach to select a portfolio of knowledge activities based on Building Blocks of Knowledge model
Mohammad Sangtarashan, Abbas Afrazeh, Amirkabir University of Technology, Iran
ID 400 Thermography monitoring and diagnostic tool in predictive maintenance
Amal Boukili and Mohammed Mesrar, Sidi Mohamed Ben Abdellah University, Fez, Morocco
ID 401 Automatic Analysis Of Online Handwriting Of Patients With Parkinson’s Disease: Statistical Study And Classification.
Aouraghe Ibtissame, Ammour Alae, Khaissidi Ghizlane, Mrabti Mostafa, Usmba Fez, Morocco
Aboulem Ghita, Belahsen Faouzi, Chu Hassan Ii Fez, Morocco
ID 402 Multi-objective Optimization of Biomass Supply Chain Networks
Farah A. Al-Noweam, Ingy A. El-Khouly, Khaled S. El-Kilany, Arab Academy for Science, Technology, and Maritime Transport, Alexandria, Egypt
ID 403 A deep long-short-term-memory neural network for lithium-ion battery prognostics
Ahmed Zakariae Hinchi and Mohamed Tkiouat, Mohamed V University, Rabat, Morocco
ID 404 An Evaluation of Road Hump Markings in Riyadh: Detectability of the Shapes and Colors
Ahmed M. El-Sherbeeny, Woo-Hyung Park, Mohammed A. Alghufaili, Abdulrahman I. Al-Husseini, King Saud University, Riyadh, KSA
ID 407 Performance Analysis of MEA in Anaerobic Co-digestion using Cow Dung, Poultry Droppings and Lawn Grass
Jonathan Empompo Bambokela, Edison Muzenda, Mohamed Belaid, University of Johannesburg, South Africa
ID 408 Impacts of Primary Flight Instrument on Pilots’ Spatial Awareness.
Yakubu Ibrahim, Flying School, Nigerian College of Aviation Technology, Nigeria
ID 409 Proposal of procedure for maintenance management in plastics processing factories of Cuba
Márian Pérez Pérez, Ángel Tomás Pérez Rodríguez, University of Holguin, Cuba Ave. Holguin, Cuba
ID 411 Reviewing postponement in the South African automobile industry: a literature review perspective
Mr Polycarpe Feussi, University of Johannesburg, South Africa
ID 412 Harnessing Technology Management to Heighten Physical Assets Reliability
Peter Muganyi and Charles Mbohwa, University of Johannesburg, Johannesburg, South Africa
ID 413 How to manage and drive change in a small and medium manufacturing production company?
Arabi Salma, Chafi Anas and El Hammoumi Mohammed, Laboratory of Industrial Techniques (LIT), Faculty of Science and Technology, Fez, Morocco
ID 415 Optimal weighting method for fuzzy opinions
Mohamed El Alaoui, Hussain Ben-Azza, Khalid El Yassini, Moulay Ismail University, Meknes, Morocco
ID 416 Maintenance Logistics Optimization through a Strategically Focused Maintenance Resources Organization
Peter Muganyi and Charles Mbohwa, University of Johannesburg, Johannesburg, South Africa
ID 417 Why Lean Six Sigma implementation is still so limited in Higher Education?
Abdullah Al-Amri, University of Strathclyde, UK
ID 418 A System Dynamics Model of Energy Dependency
Mahdi Bastan, University of Eyvanekey, Garmsar, Iran
Hamde Shakouri G., University of Tehran, Tehran, Iran
ID 419 Proactive Maintenance Strategic Application to Advance Equipment Reliability
Peter Muganyi and Charles Mbohwa, University of Johannesburg, Johannesburg, South Africa
Ignatio Madanhire, University of Zimbabwe,Harare, Zimbabwe
ID 420 What is “Big Data”: finding from a systematic review, Hace theorem and a case study
Abdelaziz Berradou, Mohamed V University, Rabat, Morocco
Tarik Saikouk, International University of Rabat, Rabat, Morocco
Mohamed Hicham Salah Eddine, Morocco
ID 421 A Simulation Study of Sustainable Agri-Food Supply Chain
Hagar H. Amer, Noha M. Galal, Khaled S. El-Kilany, Arab Academy for Science, Technology, and Maritime Transport, Alexandria, Egypt
ID 422 Variance reduction in Monte Carlo simulation of M/G/1 retrial queuing system Megdouda OURBIH-TARI, Centre Universitaire Morsli Abdellah de Tipaza, Tipaza, Algeria
Kenza TAMITI, Abdelouhab ALOUI, Khelidja IDJIS, Université de Bejaia, Bejaia, Algeria
ID 424 Starbucks Coffee Statistical Analysis
Anna Wu, Mission San Jose High School, Fremont, USA
ID 425 RFID Application to Airport Luggage Tracking as a Green Logistics Technology
Kenza Oufaska, Yassir Rouchdi, Mohamed Boulmalf, International University of Rabat, Rabat, Morocco
Khalid El Yassini, Moulay Ismail University, Morocco
ID 427 Investigating Supply Chain Performance and Supply Chain Integration Linkage in Jordanian Manufacturing Firms
Vikas Kumar, Jack Zeidan, Archana Kumari, University of the West of England, Bristol, UK
Jose Arturo Garza-Reyes,University of Derby, Derby, UK
Jiri Tupa, University of West Bohemia, Pilsen, Czech Republic
ID 428 Bi-level Programming Model for Combining Motivation, Opportunity and Ability Factors in Knowledge Sharing
Mohsen Tabatabaei, Abbas Afrazeh and Abbas Seifi, Amirkabir University of Technology, Tehran, Iran
ID 429 Semiconductor Manufacturing Planning under Demand, Production and Process Yields Uncertainties
Eghbal Rashidi, Santa Clara University, Santa Clara, USA
Scott Mason, Clemson University, Clemson, USA
ID 430 New Framework to Optimise Leagile Supply Chain Design
Thi Hong Dang Nguyen and Thien-My Dao, l’Université du Québec, Montréal, QC, Canada
ID 431 Optimización de algoritmo de ruteo a partir del uso del índice de compacidad dentro de los cálculos de matrices de distancia
Carlos Armando López Solano, Linda Bibiana Rocha Medina, Alexander Gutiérrez Sánchez e Iván Guillermo Peña Arenas, Corporación Universitaria Minuto de Dios – UNIMINUTO, Bogotá – Colombia
ID 432 A New formulation of Capacitated Plant Location Problem
RRK Sharma and Ajay Jha, Indian Institute of Technology, Kanpur, INDIA
ID 433 Comparison of different designs of the FAST-mobile
Abdul Rauf and Anjum Ali, National University of Computer and Emerging Sciences, Lahore, Pakistan
ID 434 Inventory control policies in the humanitarian supply chain using system dynamics modeling
Ali Anjomshoae, Adnan Hassan, Kuan Yew Wong, Universiti Teknologi Malaysia, Skudai, Malaysia
ID 435 Towards a Reliable Decision Making on Safety Barriers Performance based on Expert Judgments in the Framework of BORA Approach
Mouloud Bourareche, Zakarya Chiremsel, Rachid Nait-Said, Nouara Ouazraoui, University of Batna, Batna, Algeria
ID 436 A Hybrid Approach based on Fault Tree and Bayesian Network for Maintenance and Fault Diagnosis of Safety Instrumented System
CHIREMSEL Zakarya, BOURARECHE Mouloud and NAIT-SAID Rachid, University of Batna, Fesdis, Batna, Algeria
ID 437 Implementation of Kanban, a Lean tool, In Switchgear Manufacturing Industry – A Case Study
Shashwat Gawande, Prof. J.S Karajgikar, Savitribai Phule Pune University, Pune, Maharashtra, India
ID 439 Managing local communities in Large Projects, Appraial of Two complex Projects in Iran
Roya Derakhshan Alavijeh, Universidad Politecnica da Madrid, Madrid, Spain
Abbas Ahmadi, Amirkabir University of Technology, Tehran, Iran
ID 440 Moroccan Electronic Health Record System
Houssam BENBRAHIM, Hanaâ HACHIMI, Aouatif AMINE, Ibn Tofail University, Morocco
ID 441 Designing of New Attribute Control Chart with Multiple Dependent State Sampling using a Cost Model Based on Loss Functions
Muhammad Aslam, King Abdulaziz University, Jeddah, Saudi Arabia
Mohammad Saber Fallah Nezhad and Samrad Jafarian-Namin, Yazd University, Yazd, Iran
ID 442 PackageCargo – Open Source Tool based on Optimization and Simulation for the Container Loading Problem with Dynamic Stability
Juan C. Martínez, Daniel Cuellar, Edgar Céspedes and David Álvarez-Martínez, Universidad de Los Andes, Bogotá D.C., Colombia
ID 443 Relating Analytics to Strategy, Culture and Personalities involved in Decision Making
RRK Sharma, NK Tripathi, IIT KANPUR, India
ID 444 The Impact of Employee Motivation on Productivity at a Water Treatment and Supply’s Laboratory in Johannesburg, South Africa
Sambil Mukwakungu, Jwalane Elizabeth Mpharoane, Charles Mbohwa, University of Johannesburg, South Africa
ID 445 Barriers to Sustainable Construction Practices in the Zambian Construction Industry
Douglas Aghimien, Clinton Aigbavboa, Ayodeji Oke, and Chanda Musenga, University of Johannesburg, South Africa
ID 446 Procedure for the management and prevention of risks for process in budgotten universities
Aylín Pupo Pérez, Marisol Pérez Campaña, Aniuska Ortíz Pérez, Claudia Díaz Leyva, University of Holguin, Holguin, Cuba
ID 447 Procedure to manage the suitability of workers in public health entities
Carlos Rafael Nuñez Cruz, Leudis Orlando Vega de la Cruz, Claudia A. Díaz Leyva, University of Holguin, Holguin, Cuba
ID 448 Development of Approximation Algorithms for Minimizing the Average Flowtime and Maximum Earliness with Zero Release Dates
Saheed Akande, Afe Babalola University, Ado-Ekiti Nigeria
Ayodeji. E. Oluleye, University of Ibadan, Ibadan, Nigeria
E.O. Oyetunji, Lagos State University, Lagos, Nigeria
ID 449 A hybrid systems approach – DEMATEL technique to determine effective factors on marine industries growth in developing countries
Shahdad Eshaghpour, Seyed Hossein Hosseini, Seyed Amir Aghaie, SAMAM, Tehran, Iran
Mohammad Saeed Seif, Sharif University of Technology, Iran
ID 453 Modeling Infectious Disease in Healthcare Problems for the Medical Systems Improvement in Bangladesh
Mst. Shanta Khatun, Uzzwal Kumar Mallick and Md. Haider Ali Biswas, Khulna University, BANGLADESH
ID 454 Connected Vehicles using NDN for Intelligent Transportation Systems
Zakaria SABIR and Aouatif AMINE, Ibn Tofail University, Morocco
ID 455 Achieving Sustainability in Construction through Value Management
Douglas Aghimien, Ayodeji Oke, Clinton Aigbavboa, University of Johannesburg, South Africa
ID 456 A Three Echelon Supply Chain Model with Fuzzy Demands and Disruptions
Iraj Mahdavi and Milad Hematian, Mazandaran University of Science and Technology, Iran
Mir Mehdi Seyed Esfahani, Amir Kabir University of Technology, Iran
Mazandaran University of Science and Technology, Iran
ID 457 A closed-loop multi echelon green supply chain network with stochastic demand
Iraj Mahdavi, Tara Esmaeilpour, Milad Hematian and Ali Tajdin, Mazandaran University of Science and Technology, Iran
ID 458 The Effect of Ceiling Height on Thermal Comfort for Ceiling-Based Air Distribution Systems Vs Underfloor Air Distribution Systems in an Office Space
Meshal AlOtaibi, University of Kansas, USA
ID 459 Life cycle assessment, Optimization and Multi criterions DM models facing Waste Management problems literature Review
Elham Rezaee, Abbas Ahmadi and Dr. Kaveh Mohammad Cyrus, Amirkabir University of Technology (Tehran Polytechnic), Iran
ID 460 On the relationship between Lean Supply ChainManagement and performance improvement by adopting Industry 4.0 technologies
Guilherme Luz Tortorella, Rogério Feroldi Miorando and Carlos Ernani Fries, Federal University of Santa Catarina, Brazil
Alejandro Mac Cawley Vergara, Pontifical Catholic University of Chile, Chile
ID 462 Vendor Development Program: An empirical validation of vendor performance through Business Excellence Framework.
Zarak Sh. Zamrah and Safian Sharif, University of Technology Malaysia, Malaysia
ID 463 WORK STUDYAS MANUFACTURING TOOL FOR REDUCING TIME AND COST FACTORS IN EMERGING PRODUCTION ENVIRONMENT
Ghulam Yasin Shaikh, Shakeel Ahmed Shaikh and R.H Gopang, Mehran University of Engineering & Technology Jamshoro Sindh Pakistan
ID 465 Model-based Systems Engineering of phosphate beneficiation processes
Mariem Ait Bakader and Laurent Deshayes, Mohammed VI Polytechnic University,MOROCCO
Mohammed El Asri, Sidi Mohamed Ben Abdellah University, MOROCCO
ID 466 Quality Control Circle And Performance On Construction Industry
Ofila Irhamna and Rahmat Nurcahyo, Universitas Indonesia, Indonesia
ID 467 Development of the industrial model of a phosphate destoning unit
Fatima-ezzahra Choubi and Laurent Deshayes, Mohammed VI Polytechnic University, MOROCCO
ID 468 Success Factors for developing Air cargo in African Markets
Boutaina Hajjar and Dr. Omar Drissi Kaitouni, Mohammadia School of Engineers- Mohammed V University, Morocco
ID 469 Investigating the Efficiency and Effectiveness of Project Execution in a South African Project Based Organisation
Palesa Tsotetsi and Chipo Mugova, Mancosa Graduate School of Business, RSA
ID 470 Simulation and Implementation of Mobile Technology Resources to Enhance Healthcare Service Delivery for Chronic Health Conditions in Developing Nations
Pamela McCauley, Science University of Central Florida Orlando USA
ID 471 Line Balancing in assembly line. A case study.
Michelle Eugenia Sánchez Barrientos, Valeria Argumedo Hinojosa, Fabiola Mercedes Arango García, Teresa Verduzco-Garza, Fernando González-Aleu, Jesús Vázquez, Universidad de Monterrey, México
ID 472 Pricing Optimization and Seat Inventory Allocation for Intercity Passenger Train Services
Fransiscus R. Pratikto and Ratih Nindita, Parahyangan Catholic University, Indonesia
ID 473 An Integrated Approach with MOORA, SWARA, and WASPAS Methods for Selection of 3PLSP
Arvind Jayant and Shweta Singh, Sant Longowal Institute of Engg. & Technology, INDIA
K. Garg, Delhi Technological University, INDIA
ID 474 MULTIPLE CAN-ORDER LEVEL FOR CAN-ORDER POLICY OPTIMIZATION:A CASE STUDY
Budi Santosa and Faldy Maulana Yuantoro, Institut Teknologi Sepuluh Nopember, Indonesia
ID 475 Biogas and Bio solids Production from Tea Waste through Anaerobic Digestion
M. Manyuchi, C. Mbohwa and E. Muzenda, University of Johannesburg, South Africa
ID 476 Biogas and Bio solids Production from Tea Waste through Anaerobic Digestion
M. Manyuchi, C. Mbohwa and E. Muzenda, University of Johannesburg, South Africa
ID 477 Resource Recovery from Corn Residues through Production of Biogas and Bio-hydrogen
M. Manyuchi, C. Mbohwa and E. Muzenda, University of Johannesburg, South Africa
Moyo, Harare Institute of Technology, Zimbabwe
ID 478 Bioethanol Production from Corn Residue
M. Manyuchi, C. Mbohwa and E. Muzenda, University of Johannesburg, South Africa
Muganu, Harare Institute of Technology, Zimbabwe
ID 479 Bioethanol Production from Corn Residue
M. Manyuchi, C. Mbohwa and E. Muzenda, University of Johannesburg, South Africa
Muganu, Harare Institute of Technology, Zimbabwe
ID 480 Risk Assessment Decision Matrix for Emergency Room’s Employee in a Turkey Case
Nilgun Kayadelen, Cukurova University, Turkey
Piril Tekin, Adana Science and Technology University, Turkey
ID 481 ISSUES AND IMPROVEMENT OPPORTUNITIES IN MANAGEMENT SYSTEM INTERNAL AUDIT – A SURVEY
Edly F. Ramly, EFR Certification Sdn Bhd, Malaysia
Mohd Soffian Osman, Safety Management Academy Sdn Bhd, Malaysia
ID 482 Forecast for products with a short life cycle and their relationship with the supply chain
Andrés Velásquez Contreras, Universidad Autónoma de Colombia, Doctorado en Logística y Dirección de la Cadena de Suministro, Universidad Popular Autónoma del Estado de Puebla, Mexico
Diana Sánchez-Partida, Universidad Popular Autónoma del Estado de Puebla., México
ID 483 Developing a Risk Assessment Model for non-Technical Risk in Energy Sector
Sahar Mohammad AL Mashaqbeh, J. E. Munive –Hernandez, University of Bradford, UK
Khurshid Khan, Abdul Wali Khan University, Pakistan
ID 484 Developing a Risk Assessment Model for non-Technical Risk in Energy Sector
Sahar Mohammad AL Mashaqbeh, J. E. Munive –Hernandez, University of Bradford, UK
Khurshid Khan, Abdul Wali Khan University, Pakistan
ID 485 Design of a centralized warehouse layout and operation flow for the automotive industry: A simulation approach
Adriana Margarita Verduzco Guzmán, Kathia Montserrat Montalvo González, Mariana Frías Canales, María Teresa Verduzco Garza, Universidad de Monterrey, N.L., Fátima Briceño de la Rosa, Daimler AG, N.L., Mexico
ID 486 A Locating-Routing Model for Hazardous Materials Transport Planning based on Time Value of Money for Establishing and Operating Costs (Case study: Northwest Area of Iran)
Hamideh Baghaei Daemi and Abbas Mahmoudabadi, MehrAstan University, Iran
Roozbeh Azizmohammadi, Payame Noor University, Iran
ID 487 Productivity gains through PDCA approach in an Auto Service Station
Arvind Bhardwaj, Jitendra Nagar, Rahul S Mor, National Institute of Technology, India
ID 488 Ranking the Needs of Students with Disabilities at the University of Sharjah and Identifying the State of the Art of Assistive Technologies
Mohamed Adam , Saif AlKhaja , Mohammed Alsafadi , Mohammed Baraa Sayour , Sadeque Hamdan , and Imad Alsyouf, University of Sharjah, United Arab Emirates
ID 489 Improving Self-cleaning System for De-fouling Thermal Power Plant Heat Exchangers: Case Study
Ignatio Madanhire and Isheanesu Zimba, University of Zimbabwe, Zimbabwe
Charles Mbohwa, University of Johannesburg, South Africa
ID 490 Design Improvement of Off-road Rough Uneven Rural Terrain Wheelchair
Ignatio Madanhire and Isheanesu Zimba, University of Zimbabwe, Zimbabwe
Charles Mbohwa, University of Johannesburg, South Africa
ID 491 Design of an Automated Dam Shutter Control System: Case study
Ignatio Madanhire and Isheanesu Zimba, University of Zimbabwe, Zimbabwe
Charles Mbohwa, University of Johannesburg, South Africa
ID 492 Numerical simulation of the coal and straw co-firing in 150KW swirling stabilized burner
N.RASSAI, N.BOUTAMMACHTE, A.BEKRAOUI, Ecole Nationale Supérieure d’Arts et Métiers, Morocco
ID 493 Modeling and solving a bi-objective single-period problem within incremental discount in framework of multi-objective problems approach
Mahsa Najimi and Seyed Hamid Reza Pasandideh, Kharazmi University, Iran
ID 494 Vehicle Routing Problem for Blood Mobile Collection System with Stochastic Supply
Andrea Pirabán Ramírez, Logistic Systems Research Group, School of Engineering, Universidad de La Sabana, Campus Puente del Común, Chía, Cundinamarca, Colombia and ICD-LOSI, Université de Technologie de Troyes, Cedex, France
Nacima Labadie, ICD-LOSI, Université de Technologie de Troyes, Cedex, France
William Javier Guerrero Rueda, Logistic Systems Research Group, School of Engineering, Universidad de La Sabana, Campus Puente del Común, Cundinamarca, Colombia
ID 495 Study of Impact of Industrial Logistics Function on the Performance of the PME Case Maintenance Function in Morocco
Driss Serrou, ISTL, Casablanca, Morocco
Faycal MI Mouni, ISTL, Casablanca, Morocco
ID 496 Measuring the performance of the reverse supply chain based on the BSC approach
Faycal Mimouni and Driss Serrou, Institute of Transport and Logistics, Morocco
ID 497 Preferred Team Roles of Construction Professionals in the South African Construction Industry
Douglas Aghimien, Ayodeji Oke, Clinton Aigbavboa, and Nokuphila Ntuli, University of Johannesburg, South Africa
ID 498 DESIGN FOR SUPPLIER PERFORMANCE ASSESSMENT MODEL OF INFORMATION TECHNOLOGY SERVICE PROVIDER IN SMALL MEDIUM ENTERPRISES
ElisaKusrini, Alfanugrah Hi Usman, Indonesia Islamic, Indonesia
ID 499 How to Distribute Hazmat Transport Risk over the Intercity Network? An Empirical Study
Mahdieh Mahmoudabadi, Sharif University of Technology, Iran
Abbas Mahmoudabadi, Mehrastan University, Iran
Niloofar Afifi Kisomi, Mehrastan University, Iran
Arash Gholami, Islamic Azad University, Iran
ID 500 Forecasting Air Passenger Demand with System Dynamics Under Terrorism Threat
Volkan Cakir, İstanbul Arel University, Turkey
Sait Oguz, Hezarfen Aeronautics and Space Technologies Institute, Turkey
ID 501 Analysis of an Economic Order Quantity and Forecasting Models for Transmission Plant
Qasim M Kriri, Lawrence Technological University, USA
ID 502 A System Dynamics Approach Model For Quitting Smoking Behaviour and An Analysis in Turkey
Ugur Hosyilmaz and Volkan Cakir, İstanbul Arel University, Turkey
ID 503 DESIGN PERFORMANCE MEASUREMENT MODEL FOR RETAIL SERVICES USING HALAL SUPPLY CHAIN OPERATION REFERENCE (SCOR) : A CASE STUDY IN A RETAIL IN INDONESIA
Elisa K, Qurtubi, Nafiatul Husna Fathoni, Fakultas Teknologi Industri Universitas Islam Indonesia, Yogyakarta
ID 504 Improving the warehouse operations in a furniture importing company
Laith A Hadidi, and Abdelhakim Azzedine Zerguine, King Fahd University of Petrolium and Minerals, Dhahran, Saudi Arabia
ID 505 Modeling and Simulation of a Photovoltaic System Connected to a Low-voltage Three-phase Utility Grid
SATIF and R. ELGOURI, National School of Applied Sciences (ENSA), Morocco
HLOU, Ibn Tofail University, Morocco
ID 506 A new multi-criteria product design concept evaluation with consideration of product architecture, process and supply chain design
Hesam Shidpour and Mohsen Shidpour, University of Hormozgan , Iran
ID 507 Effect of Personality on Consumer Switching in Services Marketing: Moderating Role of Involvement and Value of Services
Anjali Sharma and R.R.K. Sharma, Indian Institute of Technology-Kanpur,India
ID 508 Analysis of Project Profitability and Schedule Overruns Using System Dynamics, A Case Study of Trigeneration System
Ali Firat Elci and Volkan Cakir, Istanbul Arel University, Turkey
ID 510 Classification, Purpose, Enablers of Lean Dimensions at Automotive manufacturing Industry: A Case Study
Raed El-Khalil, Adnan Kassar School of Business
ID 511Classification of Epilepsy Groups using EEG Signals and Patient Properties
Erçin Özcan and Elifcan Göçmen, Çukurova University, TURKEY
ID 513 Risk Management for Maritime Logistics
Elifcan Göçmen, Çukurova University, TURKEY
ID 514 Biomimicry Problem-Based Approach as a Strategy for Sustainable Innovations in the Construction Industry
Oguntona A. Olusegun and Aigbavboa O. Clinton, University of Johannesburg, South Africa
ID 516 From Lean Manufacturing to Lean Enterprise 4.0: Intergration of theoretical foundations emerging with Grounded Theory Method
Eldon Caldwell, University of Costa Rica, Costa Rica
ID 517 Influence of Experiential Learning on Education of Construction Students in South Africa
Clinton O. Aigbavboa, Michael G. Oladokun and Mokgadi D. Kgoadi, University of Johannesburg, South Africa
ID 518 Impact of Culture on Construction Education in South Africa
Michael G. Oladokun, Clinton O. Aigbavboa and Mokgadi D. Kgoadi, University of Johannesburg, South Africa
ID 519 PERFORMANCE EVALUATION OF LOGISTICS ENTERPRISE BASED ON THE FUZZY ANALYTIC HIERARCHY PROCESS
Yavuz Selim Özdemir and Gülsüm Bilgin, Istanbul Arel University, Turkey
ID 520 Work-related psychosocial factors associated with lower back pain among male handicraft workers in Jaipur, India
Dipayan Das, Awadhesh Kumar and Monica Sharma, Malaviya National Institute of Technology Jaipur, India
ID 521 Development of Regression Model for Visual Discomfort in Building Spaces: an Experimental Study
Deevesh Sharma, Awadhesh Kumar and Monica Sharma, Malaviya National Institute of Technology Jaipur, India
ID 523 TOWARDS INCREASING THE USE OF PRE FABRICATION COMPONENTS IN MALAYSIA CONSTRUCTION INDUSTRY
Wan Nadzri Osman, Mohd Nasrun Mohd Nawi, Mohd Wira Mohd Shafiei, Radzi Ismail, University Uttara Malaysia
ID 524 An Environmental Concrete with Algerian Concrete
Saida Kitouni, Constantine 3 University, Algeria
ID 525 Proposal of procedure for maintenance management in plastics processing factories of Cuba
Márian Pérez Pérez, University of Holguin, Holguin, Cuba
Ángel Tomás Pérez Rodríguez, University of Holguin, Holguin, Cuba
ID 526 Application of Big Data Analytics for Recommending V93K Tester Platform Focus Area with High Test Time and Index Time Deviation
Romero Sunshine Ander, Koh Mei Hwei and Tang Ho Hwa, Infineon Technologies Asia Pacific Pte. Ltd, Singapore
ID 527 A Study on Benefits and Barriers of Implementing Building Information Modelling (BIM) in Malaysian Construction Industry
Mazri Yaakob, Jessie James, Mohd Nasrun Mohd Nawi, Kamaruddin Radzuan, Universiti Utara Malaysia, Malaysia
ID 528 Industrial Engineering Education Field in Colombia
Luisa Fernanda Rodríguez Valbuena, Unité Mixte de Recherche Education, Formation, Travail, Savoirs
École Doctorale CLESCO – Université Toulouse Jean Jaurès, France
ID 529 Design of a global sourcing strategy to reduce assembly components cost: A case study.
Teresa Verduzco-Garza, Marcos Cisneros, Francisco Lopez, Daniela Santiago, Universidad de Monterrey, Mexico
ID 539 A Framework to Assess a Knowledge-Based Economy: Special Focus to Higher Educational Institutions
Emad Summad, Mahmood Al-Kindi, Ahm Shamsuzzoha and Sujan Piya, Sultan Qaboos University, Muscat
Mohammad K. Ibrahim, Umm Al Qura University, Saudi Arabia
ID 540 Employing Multiple Criteria Decision Making to Evaluate HSE Performance of Contractors Case study : Lorestan Province Gas Company
Moslem Parsa and Somayeh Taheri, Lorestan Province Gas Company, Khorramabad , Iran
Samira Taheri, Arak Branch Islamic Azad University,Khorramabad , Iran
ID 541 The Delphi Technique on Evaluation of Shopping Centre Classification Criteria in Malaysia
Ihfasuziella Ibrahim, Abdul Talib Bon, Abdul Hadi Nawawi and Edie Ezwan Mohd Safian, UTHM, Malaysia
ID 542 The Delphi Technique on Evaluation of Shopping Centre Classification Criteria in Malaysia
Ihfasuziella Ibrahim, Abdul Talib Bon, Abdul Hadi Nawawi, Ihfasuziella Ibrahim and Edie Ezwan Mohd Safian, UTHM, Malaysia
ID 544 Plastics waste reverse logistics in Johannesburg.
ID 545 Value-at-Risk Contribution under Asset Liability Models by Using Expenential Weighted Moving Average Approaches
Sukono, Eman Lesmana, Betty Subartini and Yuyun Hidayat, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, University Tun Hussein Onn Malaysia, Malaysia
ID 546 Comparison of Pension Fund Calculations Using Actuarial Methods of Projected Unit Credit and Pay-As-You-Go
Sukono, Eman Lesmana, Betty Subartini and Yuyun Hidayat, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, University Tun Hussein Onn Malaysia, Malaysia
ID 547 Signal Groups of Clique Compatible Graph in Traffic Control Problems
Mochamad Suyudi, Sukono, Universitas Padjadjaran, Indonesia
Mustafa Mamat, Universiti Sultan Zainal Abidin, Terengganu, Malaysia
Abdul Talib Bon, University Tun Hussein Onn Malaysia, Johor, Malaysia
ID 548 A New Jerk Chaotic System with Three Nonlinearities and Its Circuit Implementation
Aceng Sambas, Universitas Muhammadiyah Tasikmalaya, Indonesia
Sukono, Universitas Padjadjaran, Indonesia.
Sundarapandian Vaidyanathan, Vel Tech University, Avadi, Chennai, India
Muhammad Suzuri Hitam, Universiti Malaysia Terengganu, Malaysia
Mustafa Mamat, Universiti Sultan Zainal Abidin, Kuala Terengganu, Malaysia
Abdul Talib Bon, University Tun Hussein Onn Malaysia, Malaysia
ID 549 Calculation of Net Annual Health Insurance Premium Using Burr Distribution
Agus Supriatna, Kankan Parmikanti, Lita Novita, Sukono, Betty Subartini, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, University Tun Hussein Onn Malaysia, Malaysia
ID 550 Numerical Analysis for Identifying Mathematical Model of Tumor Therapy
Subiyanto and Yudi Nurul Ihsan, Universitas Padjadjaran, Indonesia.
Sukono and Sudradjat Supian, Universitas Padjadjaran, Indonesia.
Aceng Sambas, Universitas Muhammadiyah Tasikmalaya, Indonesia
Mustafa Mamat, Universiti Sultan Zainal Abidin, Kuala Terengganu, Malaysia
Abdul Talib Bon, University Tun Hussein Onn Malaysia, Malaysia
ID 551 A New Four-Dimensional Two-Wing Chaotic System with a Hyperbola of Equilibrium Points, its Properties and Electronic Circuit Simulation
Sundarapandian Vaidyanathan, Vel Tech University, Avadi, Chennai-600 062, India
Aceng Sambas, Universitas Muhammadiyah Tasikmalaya, Indonesia
Sukono, Universitas Padjadjaran, Indonesia
Subiyanto, Universitas Padjadjaran, Indonesia.
Mustafa Mamat, Universiti Sultan Zainal Abidin, Kuala Terengganu, Malaysia
Abdul Talib Bon, University Tun Hussein Onn Malaysia, Malaysia
ID 552 Determining the Numbers of Time Series Observation for Rice Crisis Forecasting
Yuyun Hidayat and Titi Purwandari, Universitas Padjadjaran, Indonesia
Sri Rijati Wardiani, Universitas Padjadjaran, Indonesia
Sukono, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, University Tun Hussein Onn Malaysia, Malaysia
ID 553 Integration of Quality, Health & Safety, Environment and Social accountability under a single Management System
SubrataTalapatra and Md. KutubUddin, Khulna University of Engineering & Technology, Khulna, Bangladesh
ID 554 Failure of Francis Water Turbines due to Flow Variations in Papua New Guinea
Nicholas Lambrache, John Pumwa, Dapsy Olatona, Mihail Ursul and Brian N’Drelan PNG University of Technology, Morobe, Papua New Guinea
ID 555 Experimental optimization of fused deposition modeling process parameters: a Taguchi process approach for dimension and tolerance control
Isksioui Hamza, El Gharad Abdellah, Oubrek Mohamed, ENSET, UM5, Rabat, Morocco
ID 556 Evaluating the role of collaboration in NPD team climate for innovation.
Syeda Asiya Zenab Kazmi and Marja Naaranoja, University of Vaasa, Finland.
ID 558 Establishing a link between the simulation and PMBOK Project Management Standard for improving processes in project- oriented organizations Case Study: Lorestan Province Gas Company
Moslem Parsa and Somayeh Taheri Lorestan Province Gas Company, Khorramabad , Iran
Fatemeh Jaferi and Samira Taheri, Islamic Azad University, Isfahan,Iran
ID 559 Overall Efficiency Improvement of a Production Line by Using Yamazumi Chart: A Case Study
Subrata Talapatra, Sharif-Al-Mahmud and Imran Kabir Khulna University of Engineering and Technology, Khulna, Bangladesh