Proceedings – 2nd Australian Conference 2023
ISSN: 2169-8767 (U.S. Library of Congress) ISBN: 979-8-3507-1732-7
Abdul Rahman Rizki Wijaya, Department of Industrial Engineering, Universitas Islam Indonesia, Jl. Kaliurang km 14.4, Sleman, Yogyakarta, Indonesia
Winda Nur Cahyo, Department of Industrial Engineering, Universitas Islam Indonesia, Jl. Kaliurang km 14.4, Sleman, Yogyakarta, Indonesia
ID 5 Assessing the Empowerment Program at a South African University
Sambil Charles Mukwakungu, Sandy Ndlovu, Nita Sukdeo and Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
ID 6 The Management of Change and Organizational Culture within the Media Industry in South Africa
Sambil Charles Mukwakungu, Portia Makamu, Nita Sukdeo and Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
Sambil Charles Mukwakungu, Refilwe Dipholo, Nita Sukdeo and Charles Mbohwa, Department of Quality and Operations Management University of Johannesburg, Johannesburg, South Africa
Sambil Charles Mukwakungu and Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
Praowpan Tansitpong, Assistant Professor, NIDA Business School, National Institute of Development Administration (NIDA), Thailand
Samer Al-shami, Universiti Tekinal Malaysia, Melaka, Malaysia
ID 40 Studying and Troubleshooting Lubricity Test on Pressure Guidewire Proximal and Distal Coatings
Kuldeep Agarwal and Usama A. Khan, Department of Automotive and Manufacturing Engineering Technology, Minnesota State University Mankato Mankato, MN 56001, USA
ID 41 Reliability of Sewerage Pipelines in South Africa
Themba B. Masingi, Postgraduate School of Engineering Management, University of Johannesburg, Johannesburg, South Africa
Hannelie Nel, Postgraduate School of Engineering Management, University of Johannesburg, Johannesburg, South Africa
Keisuke Miyago, Natsuki Sato, Ayuko Komura and Hirohisa Hirai, Department of Industrial Engineering and Management, Kanagawa University, Kanagawa, Japan
Ran Murakami, Takaaki Kawabe, Ayuko Komura and Hirohisa Hirai, Department of Industrial Engineering and Management, Kanagawa University Kanagawa, Japan
Kaori Ojima, Ayuko Komura and Hirohisa Hirai, Department of Industrial Engineering and Management, Kanagawa University, Kanagawa, Japan
ID 46 Analysis of Determinants of Regional Attractiveness in the “Regional Brand Survey”
Ramon Imaizumi, Ayuko Komura and Hirohisa Hirai, Department of Industrial Engineering and Management, Kanagawa University, Kanagawa, Japan
ID 47 The Relationship between managers Vocal Characteristics in net Conferences and Performance
Hikaru Kanda, Takaaki Kawabe, Ayuko Komura and Hirohisa Hirai, Department of Industrial Engineering and Management, Kanagawa University Kanagawa, Japan
ID 48 Interaction Hierarchy to Sustainable Reverse Logistics Activities in Indonesia
Hesti Maheswari and Elliot Simangunsong, School of Business and Economics, Universitas Prasetiya Mulya, Tangerang-Banten, Indonesia
ID 55 Reducing Molding Sand Variation at a Job Shop Casting Facility
Kuldeep Agarwal and Ashley Folden-Ecker, Department of Automotive and Manufacturing Engineering Technology, Minnesota State University Mankato Mankato, MN 56001, USA
Jose Emmanuel Cusi-Miranda and Marlon Frank Aquino-Julcarima, Facultad de Ingeniería. Universidad de Lima, Perú
Martin Fidel Collao-Diaz, Research Professor, Facultad de Ingeniería. Universidad de Lima, Perú
ID 57 Monitoring Social Networks for Event Management: Applicability of MEWMA for Parkrun
Arya Karami and Seyed Taghi Akhavan Niaki, Department of Industrial Engineering, Sharif University of Technology, Tehran, Iran
Mohammad Hossein Shaverdi, Master’s Student in Public Policy, Department of Economics, Allameh Tabatabaei University, Tehran, Iran
Meysam Shaverdi, PhD Candidate in Supply Chain and Logistics, School of Accounting, Information Systems and Supply Chain, RMIT University Melbourne, Australia
ID 59 Barriers to Creativity in Distributed Product Development
Annika Bastian, Yaser Kassem, Christoph Kempf and Albert Albers, IEPK – Institute of Product Engineering, Karlsruhe Institute of Technology (KIT) Karlsruhe, Germany
ID 60 The Integration of Toyota Production System (TPS) and Lean Operations.
Judith Nkuna, Department of Quality and Operations Management, Department of Engineering Management, University of Johannesburg South Africa
Andre Vermeulen, Post Graduate School Engineering Management, University of Johannesburg, Auckland Park, Johannesburg, Gauteng, South Africa
Jan-Harm C. Pretorius, Post Graduate School Engineering Management, University of Johannesburg, Auckland Park, Johannesburg, Gauteng, South Africa
Guilherme Luz Tortorella, The University of Melbourne, Melbourne, Australia Daniel Nascimento, Universidad de Barcelona, Barcelona, Spain
ID 62 Development and Evolution of Smart Cities in Latin America and their Impact on Sustainability.
Sergio Mastrogiovanni, New York University, New York, NY, USA IAE Business School, Buenos Aires, Argentina
Guilherme Luz Tortorella, The University of Melbourne, Melbourne, Australia Universidade Federal de Santa Catarina, Florianópolis, Brazil
ID 63 A Leagile Supply Chain Model for the Effective Mitigation of Sudden Risks
Towfique Rahman, UTS Business School, University of Technology Sydney, Sydney, Australia
Sanjoy Kumar Paul, UTS Business School, University of Technology Sydney, Sydney, Australia
Li Guan and José M. Merigó, School of Computer Science, Faculty of Engineering and Information Technology, University Technology Sydney (UTS) Ultimo, NSW 2007, Australia
Ripon K. Chakrabortty and Alireza Abbasi, School of Systems and Computing, University of New South Wales (UNSW), Canberra, ACT 2600, Australia
Kosuke Kobayashi and Hideki Katagiri, Department of Industrial Engineering and Management, Faculty of Engineering, Kanagawa University Kanagawa, Japan
Kuldeep Agarwal and Pawan Bhandari, Department of Automotive and Manufacturing Engineering Technology, Minnesota State University, Mankato, MN 56001, USA
ID 69 Improvement Proposal to Achieve Shrinkage Reduction in Home Dispatch Process in Retail Company
Alison Pimentel Piscoya, Katherine Hidalgo Reyna and Ezilda Cabrera Gil Grados, Facultad de Ingeniería, Universidad de Lima, Perú
- L. Tulasi Devi, Associate Professor, School of Management, National Institute of Technology, Warangal (NITW), India
Shivam Azad, Research Scholar, School of Management, National Institute of Technology, Warangal (NITW), India- 506004
Abhishake Dutta, Post Graduate Engineer Trainee, L&T Construction, Mumbai, India- 400029
ID 71 Topology Optimization of the Bell Crank Lever
- Narasimha Rao, Professor, Department of Mechanical Engineering, National Institute of Technology Warangal, Warangal, Telangana, India
Ch. Sri Chaitanya, Asst. Professor, Department of Mechanical Engineering, Velagapudi Ramakrishna Siddhartha Engineering College, Kanuru Vijayawada, Andhra Pradesh, India
Koki Kitabayashi, Department of Industrial Engineering and Management, Graduate School of Engineering, Kanagawa University, Kanagawa, Japan
Hideki Katagiri, Department of Industrial Engineering and Management, Faculty of Engineering, Kanagawa University, Kanagawa, Japan
Himawari Takeuchi, Department of Industrial Engineering and Management, Graduate School of Engineering, Kanagawa University, Kanagawa, Japan
Hideki Katagiri, Department of Industrial Engineering and Management, Faculty of Engineering, Kanagawa University, Kanagawa, Japan
ID 74 Lack of Downstream Processing in the Agriculture Sector in Papua New Guinea
Sandy Stephen and Stephanie Laki, Department of Mechanical Engineering, Papua New Guinea University of Technology, Lae, MP411, Papua New Guinea
Yuki Mekata, Department of Industrial Engineering and Management, Faculty of Engineering, Kanagawa University, Yokohama, Kanagawa, Japan
Aika Kishigami, School of Science for Open and Environmental Systems, Graduate School of Science and Technology, Keio University, Yokohama, Kanagawa, Japan
Jun Hamaguchi, Department of Clinical Engineering, Faculty of Human Care at Makuhari, Tohto University, Maihama, Chiba, Japan
Miwa Nakanishi, Department of Industrial and Systems Engineering, Faculty of Science and Technology, Keio University, Yokohama, Kanagawa, Japan
Monika Klippert and Albert Albers, IPEK – Institute of Product Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
Dean Siebert and Hendrik Rust, Faculty of Management Science and Engineering, University of Applied Sciences (HKA), Karlsruhe, Germany
René Rösler, Research & Development, Witzenmann GmbH, Pforzheim, Germany
Carsten Thümmel, Miriam Kleinschrot, Stefan Eric Schwarz, Andreas Siebe and Albert Albers, Institute of Product Engineering (IPEK), Karlsruhe Institute of Technology (KIT), 76131 Karlsruhe, Germany
Albert Albers, Professor, Institute of Product Engineering (IPEK), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
Carsten Hahn, Patrick Brecht and Ümüs Cetinkaya, Karlsruhe University of Applied Sciences, Institute of Applied Research (IAF), Karlsruhe, Germany
Felix Pfaff, Michael Schlegel and Maximilian Fischer, Institute of Product Engineering (IPEK), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
ID 79 Assessment of the Performance of Physically-Constrained Fixed-Lane Queueing Systems
Simon Anthony D. Lorenzo, Assistant Professor, Department of Industrial Engineering and Operations Research, University of the Philippines Diliman (UPD), Quezon City, Philippines
Lizabeth Ann D. Franco, Lecturer, Department of Industrial Engineering and Operations Research. University of the Philippines Diliman (UPD), Quezon City, Philippines
Sonny Hendra Sudaryana, Budisantoso Wirjodirdjo, and Agus Windharto, School of Interdisciplinary Management and Technology, Sepuluh Nopember Institute of Technology (ITS), Surabaya, Indonesia
Ihya Ulumuddin SY, School of Business and Management, Bandung Institute of technology (ITB), Bandung, Indonesia
G.G. Udaya Priyasantha Rathnayake, PhD Candidate, School of Business, Faculty of Business and Law, University of Wollongong (UOW) NSW, Australia
Anil Chandrakumara, Senior Lecturer in Global Strategy & Cross-Cultural Management, School of Business and Law, University of Wollongong Australia
Anura De Zoysa, Associate Professor, School of Business and Law, University of Wollongong, Australia
Sho Sato, Department of Industrial Engineering and Management, Graduate School of Engineering, Kanagawa University, Kanagawa, Japan
Hideki Katagiri, Department of Industrial Engineering and Management, Faculty of Engineering, Kanagawa University, Kanagawa, Japan
Masanobu Matsumaru, Research Institute for Engineering, Kanagawa University, Kanagawa, Japan
ID 83 Adoption of Agile Project Management: A Case Study in a Technology Service Company
Aquiles Nogueira, Master Student in the Department of School of Management, Federal University of Paraná, UFPR, School of Management PR, Curitiba, Brazil
Guilherme Francisco Frederico, Professor in the Department of School of Management, Federal University of Paraná, UFPR, School of Management, PR, Curitiba, Brazil
ID 84 Medical Device Failures Analysis: Engineering Management Perspectives
Limpat Salamat, Engineering Management, Faculty of Engineering and IT, University of Melbourne, Melbourne, Australia
Pranav Sutar, Department of Production Engineering, National Institute of Technology Tiruchirappalli, Tiruchirappalli, Tamil Nadu 620015, India
Jessica Olivares-Aguila and Alejandro Vital-Soto, Department of Management Science, Shannon School of Business, Cape Breton University, Sydney, NS B1M 1A2, Canada
Carol Sofia Pedragas-Castro, Faculty of Engineering and Architecture, University of Lima, Perú Francis Sofia Perez-Bartra, Faculty of Engineering and Architecture, University of Lima, Perú
Martin Fidel Collao-Díaz, Research Professors, Faculty of Engineering and Architecture, University of Lima, Perú
Yao Zhang and Ying Tian, Department of Operations Management, School of Economics and Management, Dalian, University of Technology, Dalian, China
ID 90 Enhancing Lean Implementation in SMEs: Exploring Barriers and HRM Strategies
Diego Adrian Gerboline-Pastor, Faculty of Engineering, University of Lima, Lima, Perú Rafael Chavez-Ugaz, Research Professor, Faculty of Engineering, University of Lima
ID 93 Electric Drive Health Assessment
Pantaleon Su Lai Tiing, Suriatee Saikhol Rosli, Muhammad Fiqri Abdul Rahman and Mohd Faiz Abdul Hamid, Electrical Engineering Department Group Technical Solutions of PETRONAS, Kuala Lumpur, Malaysia
Vedant Agrawal, Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, West Bengal 721302, India
Alejandro Vital-Soto and Jessica Olivares-Aguila, Department of Management Science, Shannon School of Business, Cape Breton University Sydney, NS B1M 1A2, Canada
Simangaliso Hlengwa, Postgraduate School of Engineering Management, University of Johannesburg, Johannesburg, South Africa
Hannelie Nel, Postgraduate School of Engineering Management, University of Johannesburg, Johannesburg, South Africa
ID 98 Usage Awareness of Remanufactured Products: A Case Study from the Kingdom of Saudi Arabia
Murtadha Aldoukhi, Assistant Professor, Industrial Engineering Department, Al Yamamah University, Riyadh, Kingdom of Saudi Arabia
ID 99 Implementation of 5S and its Impact: A University Case Study
RD Mukoma, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa
Sujeet Kumar Chaubey, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa
ID 100 A Mini Review on Machining of Aluminum
RM Magabe, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, Johannesburg, Republic of South Africa
Sujeet Kumar Chaubey, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, Republic of South Africa
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, Johannesburg, Republic of South Africa
Kapil Gupta, Professor, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, Johannesburg, Republic of South Africa
Asser Letsatsi Tau, Emmanuel Innocents Edoun, Charles Mbohwa and Anup Pradhan, Faculty of Engineering and the Built Environment, School of Mechanical Engineering and Industrial Engineering, Department of Quality and Operations Management, University of Johannesburg, 55 Beit St, Doornfontein, Johannesburg, 2028, South Africa
ID 103 Analysis of Equipment Failure in a Production Line of a Coal Fly Ash Plant
Asser Letsatsi Tau, Emmanuel Innocents Edoun, Charles Mbohwa and Anup Pradhan, Faculty of Engineering and the Built Environment, School of Mechanical Engineering and Industrial Engineering, Department of Quality and Operations Management, University of Johannesburg, 55 Beit St, Doornfontein, Johannesburg, 2028, South Africa
ID 104 How Digital Transformation is Reshaping Supply Chains: from Networks to Ecosystems
Evans Amoah, David Asamoah, Kwame Owusu Kwateng and John Serbe Marfo, Department of Supply Chain and Information Systems – School of Business, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana
Francis Andoh-Baidoo, Full Professor in the Department of Information Systems, The University of Texas Rio Grande Valley, Robert C. Vackar College of Business and Entrepreneurship, McAllen, Texas, United States
Chee Wai Meng and Tan Jing Han, School of Business, Logistics and Supply Chain Management Programme, Singapore University of Social Sciences, Singapore
Asser Letsatsi Tau, Emmanuel Innocents Edoun, Charles Mbohwa and Anup Pradhan, Faculty of Engineering and the Built Environment, School of Mechanical Engineering and Industrial Engineering, Department of Quality and Operations Management, University of Johannesburg, 55 Beit St, Doornfontein, Johannesburg, 2028, South Africa
Zhean Shao, Wen Li, Ying Tan, Kevin Otto, The University of Melbourne, Australia
ID 110 An Explainable Artificial Intelligence Model for Project Risk Assessment
Bodrunnessa Badhon, School of Systems & Computing, UNSW Canberra at ADFA, Canberra, ACT, Australia
Ripon K. Chakrabortty, School of Systems & Computing, UNSW Canberra at ADFA, Canberra, ACT, Australia
Sreenatha Anavatti, School of Eng & Tech, UNSW Canberra at ADFA, Canberra, ACT, Australia
Domantay, Jilliane Louise V., Elico, Chesca Alexandra M., Gagpanan, Chloei Sophia Yzavelle P., Salvador and Norman Ranwell C., Faculty of Engineering, Department of Industrial Engineering, University of Santo Tomas (UST), Espana Blvd., Sampaloc, Manila, Philippines
ID 112 Use of lean manufacturing tools to support sustainability initiatives
Andrea Telcán-Guzmán, Business Administration School, Universidad del Azuay, Cuenca, Ecuador
Juan Manuel Maldonado-Matute, Maria Jose Gonzalez Calle, Ana Carolina Armijos-Orellana, María Isabel Arteaga Ortíz and Pedro Fernando Guerrero Maxi, UDA Business Observatory, Bussiness Adninistration School, Universidad del Azuay, Cuenca, Ecuador
ID 113 A Bibliometric Analysis of the Township Economy
Lawrance Seseni, Department of Business Management, School of Management, College of Business and Economics, University of Johannesburg Auckland Park, Johannesburg, South Africa
ID 115 Generating Policy Alternatives for Decision Making: A Process Model, Behavioural Issues, and an Experiment
Raimo P. Hämäläinen, Professor
Tuomas J. Lahtinen, Doctor of Technology
Kai Virtanen, Professor, Systems Analysis Laboratory
Aalto University, Finland
Precious Mmofsoa and Bernadette Sunjka, School of Mechanical, Industrial and Aeronautical Engineering, University of Witwatersrand (Wits) Johannesburg, South Africa
ID 117 Evaluating Applications of IoT and its Potential in South Africa’s Agricultural Sector
Vuyokazi Mbele and Jan Harm C Pretorius, Postgraduate School of Engineering Management Faculty of Engineering and the Built Environment University of Johannesburg, South Africa
Simphiwe Nene and Bernadette Sunjka, School of Mechanical Industrial and Aeronautical Engineering, University of the Witwatersrand Johannesburg, South Africa
ID 120 Machine Learning model for Healing analysis of Human Injury
Shubhangi D C, Professor, Department of Computer Science, Visvesvaraya Technological University CPGS Kalaburagi, Karnataka, India BaswarajGadgay, Department of Electronics and Communication, Visvesvaraya Technological University CPGS Kalaburagi, Karnataka, India Bhagyashree, Department of Computer Science, Visvesvaraya Technological University CPGS Kalaburagi, Karnataka, India
ID 121 Teacher Trainers’ Perspective for Evaluation of Online Training: DEMATEL Approach
Vasundhara Kaul, Founding Partner, Carpediem EdPsych Consultancy LLP, Bengaluru, India
Arshia Kaul, Research Consultant, Carpediem EdPsych Consultancy LLP, Bengaluru, India
ID 122 Diffusion of Multigenerational Technologies in the Indian Machine Tool Industry: Bass Model
Amruta Patil and Mahak Bisen, Research Scholar, Department of Management Studies, Indian Institute of Technology, Madras, India Prakash L Sai, Professor, Department of Management Studies, Indian Institute of Technology, Madras, India
ID 123 Automatic Menu Planning of Cafeterias Serving a la Carte Menu
Shuntaro Yamazaki, Department of Industrial Engineering and Management, Graduate School of Engineering, Kanagawa University, Kanagawa, Japan
Hideki Katagiri, Department of Industrial Engineering and Management, Faculty of Engineering, Kanagawa University, Kanagawa, Japan
Ana Fernanda Ramírez-Milla, Facultad de Ingeniería, Universidad de Lima, Lima, Perú
Rafael Chavez-Ugaz, Facultad de Ingeniería, Universidad de Lima, Lima, Perú
Nomsa SM Mafodi and Jan Harm C Pretorius, Postgraduate School of Engineering Management, University of Johannesburg, South Africa
ID 126 Realizing Electrical Digital Twin (EDT) via Intelligent Substation (IS)
Ir. Ts. Noor Mohd Fadzli B Othman, Engineering Department, PETRONAS Group Technical Solutions (GTS), Kuala Lumpur, Malaysia
Ir. Ts. M Nazim B Hamid, Engineering Department, PETRONAS Group Technical Solutions (GTS), Kuala Lumpur, Malaysia
Ir. Salmey B A Halim, Engineering Department, PETRONAS Group Technical Solutions (GTS), Kuala Lumpur, Malaysia
Noor Ekhsan B M Isnain, Engineering Department, PETRONAS Group Technical Solutions (GTS), Kuala Lumpur, Malaysia
ID 127 Revitalizing Healthcare Finances: Empowering Teams for SMART Transformation Amidst Challenges
Gokhan Anil, M.D.1, Pawan Bhandari, Ph.D.2, Joshua Nicolai, J.D., M.B.A3.
1Mayo Clinic Health System, Southwest Minnesota Region, Minnesota
2Minnesota State University, Mankato, Minnesota
3Mayo Clinic, Rochester, Minnesota
Ninad Joshi and Pawan Bhandari, Ph.D., Department of Automotive and Manufacturing Engineering Technology, Minnesota State University, Mankato, MN 56001, USA
Shubham Parekh and Pawan Bhandari, Ph.D., Department of Automotive & Manufacturing Engineering Technology, Minnesota State University Mankato, MN 56001, USA
Praneel Acharya, Ph.D., Department of Mechanical Engineering, Minnesota State University, Mankato, MN 56001, USA
Mehrab Masayeed Habib and A S M Shoaib, Philip M. Drayer Department of Electrical Engineering, Lamar University, Beaumont, Tx 77710, USA
Asif Mohammad Mithu, Department of Electrical Engineering and Computer Engineering, Villanova University, 800 E. Lancaster Ave. Villanova, PA
Fakir Sheik Zihad and Md. Yasin Arafat, Department of Industrial Engineering, Lamar University, Beaumont, Tx 77710, USA
ID 133 Designing an Integrated Supply Chain for Biodiesel Production in the UAE
Afra Najeeb Safar, Fatima Ghubar Alshamsi, Mouza Ojail Alketbi, Nada Abdulhakeem Bushlaibi and Safeya Saeed AlMaazmi, Industrial Engineering Technology Department, Higher Colleges of Technology, UAE
Yousef Abu Nahleh, Assistant Professors, Industrial Engineering Technology Department, Higher Colleges of Technology, UAE
ID 134 Research on Motion Tracking using Facial Features
Se In Jung and Shin Dong Ho, Graduate and Professor, My Paul School, 12-11, Dowontongmi-gil, Cheongcheon-myeon, Goesan-gun, Chungcheongbuk-do, Republic of Korea
Jeongwon Kim, Student, Department of Economics, College of Economics, Nihon University, 3-2 Kanda-Misakicho, 1-chome, Chiyoda-ku, Tokyo, Japan
ID 135 Research on a Movable Microcontroller-based Four-Legged Walking Robot System
Yeonju Lee and Shin Dong Ho, Student and Professor, My Paul School, 12-11, Dowontongmi-gil, Cheongcheon-myeon, Goesan-gun, Chungcheongbuk-do, Republic of Korea
Jeongwon Kim, Student, Department of Economics, College of Economics, Nihon University, 3-2 Kanda-Misakicho, 1-chome, Chiyoda-ku, Tokyo, Japan
ID 136 Research on Face Recognition System using Wavelet Analysis
Benny Choi and Shin Dong Ho, Student and Professor, My Paul School, 12-11, Dowontongmi-gil, Cheongcheon-myeon, Goesan-gun, Chungcheongbuk-do, Republic of Korea
Jeongwon Kim, Student, Department of Economics, College of Economics, Nihon University, 3-2 Kanda-Misakicho, 1-chome, Chiyoda-ku, Tokyo, Japan
Anusha Sabhahit, Senior Research Scholar, Department of Management Studies, Indian Institute of Science, Bangalore, India
Bala Subrahmanya Mungila Hillemane, Professor, Department of Management Studies, Indian Institute of Science, Bangalore, India
Gabriela Dominguez, David Martínez, Fernando Ramos, Rubén Tapia and Andrea Insfran-Rivarola, Laboratorio de Producción y Métodos, Departamento de Ingeniería Industrial, Facultad de Ingeniería, Universidad Nacional de Asunción, San Lorenzo, Paraguay
Hsiao-Chen Tai, Shu-Yu Chen, Yi-Chou Huang, Hao-Hsuan Lai, Ruei-Lin Huang and Ming-Fu Hsu, Department of Business Management, National United University, No. 1, Lianda, Miaoli City 360301, Taiwan
ID 140 Assessing Hazard Level Perception of Colors: A Comparative Study with ANSI Recommendations
Miskeen Ali Gopang, PhD Scholar and Lecturer, Department of Industrial Engineering and Management, Mehran University of Engineering and Technology, Jamshoro-76062-Sindh, Pakistan
Tauha Hussain Ali, Professor, Department of Civil Engineering, Mehran University of Engineering and Technology, Jamshoro-76062-Sindh, Pakistan
Shakeel Ahmed Shaikh, Associate Professor, Department of Industrial Engineering and Management, Mehran University of Engineering and Technology, Jamshoro-76062-Sindh, Pakistan
Mahra Alameri, Maitha Alawadhi, Maryam Almutawa, Nada Aljaberi and Sara Alamodi, Industrial Engineering Department, Faculty of Engineering, Higher College of Technology, Abu Dhabi, UAE
Judith Nkuna, Department of Quality and Operations Management, Department of Engineering Management, University of Johannesburg South Africa
Andre Vermeulen, Post Graduate School Engineering Management, University of Johannesburg, Auckland Park, Johannesburg, Gauteng, South Africa
Jan-Harm C. Pretorius, Post Graduate School Engineering Management, University of Johannesburg, Auckland Park, Johannesburg, Gauteng, South Africa
Enma Arias-Pacheco and Claudia Lucho-Alvarez, Bachelor of Science in Industrial Engineering, Faculty of Engineering, Industrial Engineering Career, Universidad de Lima, Perú
Juan Carlos Quiroz-Flores, Professor Researcher, Faculty of Engineering, Industrial Engineering Career, Universidad de Lima, Perú
ID 190 Utilization of Soybean Hulls in Paper Production
Ana Arévalos and Jorge Rodas†, Laboratorio de Control de Procesos, Departamento de Ingeniería Industrial, Facultad de Ingeniería – Universidad Nacional de Asunción. San Lorenzo, Paraguay
Eduardo Redondo, Laboratorio de Optimización, Departamento de Ingeniería Industrial, Facultad de Ingeniería – Universidad Nacional de Asunción. San Lorenzo, Paraguay
Andrea Insfrán-Rivarola, Laboratorio de Producción y Métodos, Departamento de Ingeniería Industrial, Facultad de Ingeniería – Universidad Nacional de Asunción. San Lorenzo, Paraguay
Regina León, Departamento de Ingeniería Industrial, Facultad de Ingeniería – Universidad Nacional de Asunción. San Lorenzo, Paraguay
ID 191 Assessing the Factors Influencing Productivity in Steel Manufacturing Industries
Mariam Alzaabi and Noura Alhammadi, Bachelor Student, Department of Industrial Engineering Technology, Higher Colleges of Technology, Abu Dhabi, United Arab Emirates
Sasikumar Perumal, Faculty, Department of Industrial Engineering Technology, Higher Colleges of Technology, Abu Dhabi, United Arab Emirates
Alya Ramadhani, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia
Wahyudi Sutopo, University Centre of Excellence for Electrical Energy Storage Technology, Department, Faculty of Engineering, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia
Judith Nkuna, Department of Quality and Operations Management, Department of Engineering Management, University of Johannesburg South Africa
Andre Vermeulen, Post Graduate School Engineering Management, University of Johannesburg, Auckland Park, Johannesburg, Gauteng, South Africa
Jan-Harm C. Pretorius, Post Graduate School Engineering Management, University of Johannesburg, Auckland Park, Johannesburg, Gauteng, South Africa
Alifiana Rahma Sari, Department of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Indonesia
Wahyudi Sutopo, Professor, Department of Industrial Engineering, Past Head of Department of Industrial Engineering, Head of Industrial Engineering and Techno-Economics Research Group, Vice Dean for Human Resources, Finance, and Logistics, Faculty of Engineering, Universitas Sebelas Maret (UNS), Surakarta, Indonesia, President, IEOM Indonesia Chapter
Omid Motamedisedeh and Azharul Karim, School of Mechanical, Medical and Process Engineering, Faculty of Engineering, Queensland University of Technology, 2 George St, Brisbane City, QLD, 4000, Australia
Ei Myat Kay Khine, Centre for Applied Research, Singapore University of Social Sciences, Singapore
Seyed Mehdi Zahraei, School of Business, Singapore University of Social Sciences, Singapore Sougotam Ghosh, School of Business, Singapore University of Social Sciences, Singapore
ID 221 Designing Sustainable Energy Efficient Buildings through Passive Strategies
Mehdi Gholami Rostam, PhD student, School of Engineering and Information Technology, University of New South Wales (UNSW), Australia
Dr. Alireza Abbasi, Senior Lecturer, School of Engineering and Information Technology, University of New South Wales (UNSW), Australia
ID 227 Envisioning P4.0 in Organisation X with Lean Six Sigma and the Shingo Model
Heng Li Ying, School of Business, Singapore University of Social Sciences, Singapore, Singapore
Tay Huay Ling, School of Business, Singapore University of Social Sciences, Singapore, Singapore
ID 228 Simulation of Clinical Laboratory Process Improvement based on ISO 15189 Standard
Alexia Valery Bazán Rodríguez and Gabriela Noelí Tapia Alfaro, Universidad de Lima, Carrera de Ingeniería Industrial, Lima, Perú José Antonio Taquía Gutiérrez, Universidad de Lima, Carrera de Ingeniería Industrial, Lima, Perú
Roberto Tomahuw, Farida Jasfar and Robert Kristaung, Service Management Department, Trisakti University, Jakarta
Bonang Respati Satmoko, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia, Surakarta, Indonesia
Wahyudi Sutopo, Industrial Engineering and Techno-Economics Research Group, Professor, Department of Industrial Engineering, Universitas Sebelas Maret, Surakarta, Indonesia, Surakarta, Indonesia
Bagus Susila, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering Universitas Sebelas Maret Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia
Wahyudi Sutopo, University Centre of Excellence for Electrical Energy Storage Technology, Department, Faculty of Engineering, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia
ID 232 Current Advances in Heat Loss Modelling of Industrial Boilers
Khethukuthula Modiba and Daramy Vandi Von Kallon, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, South Africa
Ervizal Buana Jatiputra, Undergraduate Student, Faculty of Engineering, Universitas Sebelas Maret (UNS), Surakarta, Indonesia
Wahyudi Sutopo, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret (UNS), Surakarta, Indonesia
Chamila Dissanayake, Dinesh Pai, Pennsylvania State University, United States
Namhla Mata, Fundiswa Dyonase and Lawrance Seseni, Department of Business Management, School of Management, College of Business and Economics, University of Johannesburg, Johannesburg, South Africa
Nannalin Tubpawatin, Cluster of Logistics and Rail Engineering, Faculty of Engineering, Mahidol University, Nakhon Pathom, Thailand
Rawinkhan Srinon, Ph.D., Cluster of Logistics and Rail Engineering, Faculty of Engineering, Mahidol University, Nakhon Pathom, Thailand
Raúl Alejandro Ortega Marchisio, Faculty of Engineering and Architecture, University of Lima, Perú
Martin Fidel Collao-Díaz, Research Professor, Faculty of Engineering and Architecture, University of Lima, Perú
ID 241 Geothermal Energy Resources, Exploitations and Applications
Moses Jeremiah Barasa Kabeyi, Industrial Engineering Department, Durban University of Technology, Durban South Africa
Oludolapo Akanni. Olanrewaju, Industrial Engineering Department, Durban University of Technology, Durban South Africa
ID 242 Geothermal Power Generation Options and Technologies
Moses Jeremiah Barasa Kabeyi, Industrial Engineering Department, Durban University of Technology, Durban South Africa
Oludolapo Akanni. Olanrewaju, Industrial Engineering Department, Durban University of Technology, Durban South Africa
ID 243 Nuclear Power in the Sustainable Energy Transition
Moses Jeremiah Barasa Kabeyi, Industrial Engineering Department, Durban University of Technology, Durban South Africa
Oludolapo Akanni. Olanrewaju, Industrial Engineering Department, Durban University of Technology, Durban South Africa
ID 244 Solar Energy as a Sustainable Energy for Power Generation
Moses Jeremiah Barasa Kabeyi, Industrial Engineering Department, Durban University of Technology, Durban South Africa
Oludolapo Akanni. Olanrewaju, Industrial Engineering Department, Durban University of Technology, Durban South Africa
ID 245 The Load Curve and Load Duration Curves in Generation Planning
Moses Jeremiah Barasa Kabeyi, Industrial Engineering Department, Durban University of Technology, Durban South Africa
Oludolapo Akanni. Olanrewaju, Industrial Engineering Department, Durban University of Technology, Durban South Africa
ID 246 Wind Energy in Sustainable Power Generation and Supply
Moses Jeremiah Barasa Kabeyi, Industrial Engineering Department, Durban University of Technology, Durban South Africa
Oludolapo Akanni. Olanrewaju, Industrial Engineering Department, Durban University of Technology, Durban South Africa
ID 247 Hydropower In the Sustainable Energy Mix
Moses Jeremiah Barasa Kabeyi, Industrial Engineering Department, Durban University of Technology, Durban South Africa
Oludolapo Akanni. Olanrewaju, Industrial Engineering Department, Durban University of Technology, Durban South Africa
Kenta Nakakura, Magzhan Atykhan, Md Abdus Samad Kamal and Kou Yamada, Graduate School of Science and Technology Gunma University, Gunma, Japan
Fatma Rashid and Fatma Khamis, Senior Students, School of Industrial Engineering, Higher Colleges of Technology (HCT), UAE
Nader Santarisi, Associate Professor – Industrial Engineering at the Higher Colleges of Technology, Dubai women’s campus, UAE
ID 259 Reliability Demonstration Tests – Challenges and Opportunities in the Automotive Industry
Tobias Leopold, Professor, Faculty Mobility and Technology, Esslingen University of Applied Sciences, Germany
ID 262 Challenges and Opportunities for Industrial Engineering in Australia
David Karr (CPEng FIIEA), Federal President, Industrial Engineers Australia, Perth, Western Australia
ID 263 A Process Innovation in the Way of Learning
Dr. Banu (Sarıkaya) Özkeser, R&D Center Manager, Koluman Otomotiv Endüstri A.Ş., Mersin, Turkey
ID 264 Conceptual Design Development of SERVQUAL Dimensions and Attributes for Pet Hotels for Cats
Erico Sofyan Chrissandhi, Master Program of Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Surakarta, Indonesia
Eko Pujiyanto and Retno Wulan Damayanti, Department of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Indonesia
Ümmügülüsüm Erdağı and Kemal Dinçer Dingeç, Department of Industrial Engineering, Gebze Technical University, Kocaeli, Turkey
Engin Sansarcı, Department of Industrial Engineering, Altınbaş University, İstanbul, Turkey
ID 266 Configurations of Requirements Instability in Enterprise Asset Development Projects
Shobhit Mathur, IITB-Monash Research Academy, Indian Institute of Technology Bombay and Monash University, Australia
Tarikere T. Niranjan, Shailesh J. Mehta School of Management, Indian Institute of Technology Bombay, India
Kristian Rotaru, Monash Business School, Monash University, Caulfield East, VIC 3145, Australia
ID 267 Blockchain Technology for Sustainable Supply Chain
Ngoc Dang Khoa Nguyen, PhD Scholar, School of Business and Law, Central Queensland University, Melbourne, Australia
Imran Ali, Senior Lecturer, School of Business and Law, Central Queensland University, Melbourne, Australia
G.G. Udaya Priyasantha Rathnayake, University of Wollongong, Australia
ID 273 Design and Operation of a GPT-powered Smart Manufacturing System
Yiyun Fei, Shu Wang and Mulang Song, School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia, USA
Jianxin (Roger) Jiao, Associate Professor of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia, USA
ID 274 Digital Twin Enhanced Smart Assembly System Design and Analysis for Resilient Operations Mulang Song, Ph.D. Candidate of Mechanical Engineering, Georgia Institute of Technology, Atlanta, USA Shu Wang, Ph.D. Candidate of Mechanical Engineering, Georgia Institute of Technology, Atlanta, USA Yiyun Fei, Ph.D. Candidate of Mechanical Engineering, Georgia Institute of Technology, Atlanta, USAJianxin(Roger) Jiao , Associate Professor of Mechanical Engineering, Georgia Institute of Technology, Atlanta, USA
Hamid Roham, Jorge F.S. Gomes, ISEG, University of Lisbon, Lisbon, Portugal
Amir Reza Safdar Tourehei, Elham Kamouri Yousefabad, Sepideh Aghajani, Mohammad Ali Avestam, Ali Behnam and Arash Malekmohammadi Mapna Turbine Blade Engineering and Manufacturing CO.
ID 288 Impact of Blockchain in Enhancing Sustainable Supply-Chain Activities within Enterprises
Sebonkile Thaba, Lecturer in Supply Chain Management, Department of Transport and Supply Chain Management, University of Johannesburg, Johannesburg, South Africa
Charles Mbohwa and Nelson Madonsela, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
ID 289 Improving Pallet Control in Mass Consumption Companies: A Proposal for Layout Optimization
Leonardo Sebastian Carranza-Quijaite and Silvana Paola Chirinos-Ayala, Facultad de Ingeniería, Carrera de Ingeniería Industrial, Universidad de Lima, Perú
Juan Carlos Quiroz-Flores, Research Professor, Facultad de Ingeniería, Carrera de Ingeniería Industrial, Universidad de Lima, Perú
Leslie Yap, Master of Engineering Management candidate, University of Melbourne
Felix Kin Peng Hui, Associate Professor, University of Melbourne