Conference Committee
Conference Chairs
- Dr. Ahad Ali, Associate Professor at Lawrence Tech University and Executive Director of IEOM Society
- Mag. Ing. Luis Alberto Zuloaga Rotta, Decano, Facultad De Ingeniería Industrial Y De Sistemas, Universidad Nacional de Ingeniería, Lima, Perú
- Dr. Mario Chauca, Professor of Industrial Engineering, Universidad Ricardo Palma
- Dr. Sandro Paz, Professor and Director, Department of Industrial Engineering Program, Pontificia Universidad Catolica del Peru, San Miguel, Lima, Peru
Technical Chairs
- Dr. Miguel Avalos Ortecho Edilberto, ULima
Program Chairs
- Professor Don Reimer, Director of Membership and Chapter Development, IEOM Society
- Prof. Vitor Mendes Caldana,Federal Institute of Sao Paulo (IFSP) – Sorocaba Campus, Sao Paulo, Brazil and Operations Director of IEOM South America
Organizing Committee
Dr. Lauro Enciso
Professor
Director de Centro de Capacitación Informática – CCI
Universidad Nacional de San Antonio Abad del Cusco
Cusco, Perú
Juan Carlos Quiroz-Flores, Ph.D.
Research Professor – ULima
Facultad de Ingeniería y Arquitectura
Carrera de Ingeniería Industrial
Universidad de Lima
Peru
Dr. Carlos Raymundo
Research Professor / Administrative coordinator at the Research Office
Universidad Peruana de Ciencias Aplicadas
Lima, Peru
Claudia León Chávarri
Full Time Professor
Carrera de Ingeniería Industrial
Universidad Peruana de Ciencias Aplicadas (UPC)
Monterrico, Santiago de Surco
Peru
Dr. Mario Chauca
Professor
Department of Industrial Engineering
Universidad Ricardo Palma
Santiago de Surco
Lima, Peru
Sandro Paz, Ph.D.
Director of the Industrial Engineering Program – PUCP
Former Director of University Accreditation
Pontificia Universidad Catolica del Peru
San Miguel, Peru
Franklin Cordova-Buiza
Research Teacher
Department of Industrial Engineering
Universidad Privada del Norte (UPN)
Lima, Peru
Elena Espinoza Rios
Facultad de Ingeniería
Coordinador Modalidad a Distancia
Ingeniería Empresarial y Sistemas e Informática
Universidad Continental
Peru
Dr. José Antonio Larco
Director – Ingeniería Industrial
Universidad de Ingeniería y Tecnología – UTEC
Jr. Medrano Silva 165, Barranco
Peru, Lima
Mag. Luis Alberto Zuloaga Rotta
Decano
Facultad De Ingeniería Industrial Y De Sistemas
Universidad Nacional de Ingeniería
Av. Túpac Amaru 210, Rímac 15333
Lima, Perú
Ing. Hugo Chacón Moscoso
Director de la Escuela Profesional de Ingeniería Industrial
Facultad de Ingeniería y Arquitectura
Universidad de San Martín de Porres
Programa Acreditado por ABET, ASIIN, ICACIT y SINEACE
Av. La Fontana 1250 Urb. Santa Patricia, La Molina
Peru, Lima
Conference Secretariat
- Dr. Taufiqul Islam, Operations Manager, IEOM Society International
Technical Committee (TC) / Review Editorial Board
- Prof. Manohar S. Madan, Professor, ITSCM Department, University of Wisconsin-Whitewater, Whitewater, WI – 53190, USA
- Dr. Adnan Hassan, Universiti Teknologi Malaysia
- Dr. Cherrafi Anass, ENSAM- Meknes, Moulay Ismail University, Morocco
- Taher Azar Ahmad, Benha University, Egypt
- Alimohammad AHMADVAND, University of Eyvanekey, Iran
- Michel ALDANONDO, Ecole des Mine d’Albi, France
- Bandar A. Alkhayyal, Prince Sultan University, Saudi Arabia
- Ahmad Taher AZAR, Benha University, Egypt
- Armand BABOLI, INSA Lyon, France
- Trishit BANDYOPADHYAY, Xavier School of Management, India
- Andrés Felipe BARCO, Universidad de San Buenaventura-Cali, Colombia
- Samuel BASSETTO, Ecole Polytechnique, Canada
- Mahdi BASTAN, University of Eyvanekey, Iran
- Philipp BAUMANN, University of Bern, Switzerland
- Cedrick BELER, Institut National Polytechnique de Toulouse – Ecole Nationale d’Ingénieurs de Tarbes, France
- Eric BONJOUR, ENSGSI – University of Lorraine, France
- Robert BOUTE, KU Leuven, Belgium
- Xavier BRUSSET, SKEMA Business School, France
- Patricia Alcantara CARDOSO, Universidade Federal do Espírito Santo, Brazil
- Kah Hin CHAI, National University of Singapore, Singapore
- Aurélie CHARLES, University of Lyon France, France
- Elyn Solano CHARRIS, Universidad de La Sabana, Columbia
- Anis CHELBI, University of Tunis, Tunisia
- Aidin Delgoshaei, Industrial Engineering Department, Kharazmi University, Tehran, Iran
- Christine DI MARTINELLY, IESEG School of Management, France
- Jose Arturo Garza-Reyes, The University of Derby, UK
- Hamed Shakouri GANJAVI , University of Tehran, Iran
- Laurent ENESTE , Institut National Polytechnique de Toulouse – Ecole Nationale d’Ingénieurs de Tarbes, France
- Ali GHARBI, ETS Montreal, Canada
- Bernard GRABOT , Institut National Polytechnique de Toulouse – Ecole Nationale d’Ingénieurs de Tarbes, France
- Elise GRUHIER , University of Bordeaux France, France
- Bhaskar GARDAS, Veermata Jijabai Technological Institute, India
- Vastag GYULA, Széchenyi István University, Hungary
- Marc Haddad, Lebanese American University, Lebanon
- Khaled HADJ HAMMOU, Institut National des Sciences Appliquées de Lyon, France
- Ramzi HAMMAMI, ESC Rennes School of Business, France
- Alaa HASSAN, University of Lorraine, France
- Petri HELO, University of Vaasa, Finland
- Lazhar HOMRI, Arts et Métiers ParisTech, France
- Lars HVAM, Technical University of Denmark, Denmark
- Emmanuel HYON, Sorbonne Université – LIP6, France
- Peter JACOBSEN, Technical University of Denmark, Denmark
- Daouda KAMISSOKO, IMT Mines Albi, France
- Özge Karanfil, Koç Üniversitesi, Turkey
- Laoucine KERBACHE, HEC Paris, France
- Javad KHAMISABADI, Islamic Azad University, Iran
- Reza Ramazani KHORSHID-DOUST, Amirkabir University of Technology, Iran
- Nathalie KLEMENT, Arts et Métiers ParisTech, France
- Anil Kumar, University of Derby, UK
- Arun KUMAR, RMIT University, Australia
- Vikas KUMAR, University pf the West England, UK
- Elmar KUTSCH, Cranfield University, UK
- Samir LAMOURI, ENSAM Arts et Métiers ParisTech, France
- Carman LEE, Hong Kong Polytechnic University, Hong Kong
- Danping LIN, Shanghai Maritime University, China
- Chrity Yaqiong LV, Wuhan University of Technology, China
- Lahcen MIFDAL, Universiapolis Agadir, Morocco
- Mehrdad MOHAMMADI, IMT Atlantique, France
- Seyed Meysam MOUSAVI, Shahed University, Iran
- Simon Peter Nadeem, University of Derby, UK
- Balkrishna NARKHEDE, National Institute of Industrial Engineering, India
- Banu OZKESER, KOLUMAN Industry Automotive, Turkey
- Maurice PILLET, Université de Savoie Mont Blanc, France
- Rakesh RAUT, National Institute of Industrial Engineering, India
- Nidhal REGZ, University of Lorraine, France
- Luis Rocha-Lona, Instituto Politecnico Nacional, Mexico
- Turki SADOK, University of Lorraine, France
- Jérémie SCHUTZ, University of Lorraine, France
- Sara SHAFIEE, Technical University of Denmark, Denmark
- Shakouri G. Hamed, University of Tehran, Iran
- Dellagi SOFIENE, University of Lorraine, France
- Reza TAVAKKOLI-MOGHADDAM, University of Tehran, Iran
- Ayeley TCHANGANI, Institut National Polytechnique de Toulouse – Ecole Nationale d’Ingénieurs de Tarbes, France
- Norbert TRAUTMANN, University of Bern, Switzerland
- Jiri TUPA, University of West Bohemia, Czech Republic
- Yazgı TÜTÜNCÜ, Izmir University of Economics, Turkey
- Eric VILLENEUVE, Ecole Supérieure des Technologies Industrielles Avancées, France
- Junqiang WANG, Northwestern Polytechnic University, China
- Yue WANG, Hang Seng Management College, Hong Kong
- Yong WU, Griffith University, Australia
- Christoph WUNCK, Jade University of Applied Sciences, Germany
- Esma YAHIA, Arts et Métiers ParisTech, France
- Bingwen YAN, Cape Peninsula University of Technology, South Africa
- Marc ZOLGHADRI, Ecole des Ingénieurs en Mécanique de Paris, France
- Funlade Sunmola , University of Hertfordshire, Hatfield, UK
- Ali MOSTAFAEIPOUR, Industrial Engineering Department, Yazd University, Iran
- Eldon Caldwell, University of Costa Rica
- Mohammad Abdullah Shaikh, Deakin University, Australia
- Bhaskar Bhandarkar, Indian Institution of Industrial Engineering (IIIE), Mumbai, India
- Mohd Khairol Anuar bin Mohd Ariffin,Co-ordinator Master of Manufacturing System Engineering,Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, University Putra Malaysia (UPM), Selangor, Malaysia
- Shekar Babu, AMRITA School of Business, AMRITA University, Bangalore, India
- Khurshid Khan, Vice Chancelor, Abdul Wali Khan University Mardan (AWKUM), Mardan, Khyber Pakhtunkhwa, Pakistan
- Mahdi Bashiri, Professor of Industrial Engineering, Shahed University, Tehran, Iran
- MELLAK Abderrahmane, Boumerdes University – Algeria
- Sumit Kumar Gupta, Dean of Science, Parishkar college of global Excellence Jaipur, India
- Sharif, Indian Institute of Technology (IIT) Kanpur (India)