Proceedings – IMEOM 2020

ISSN 2691-7734  (print)
ISSN 2691-7726  (online)
ISBN:

The 3rd International Conference on Industrial & Mechanical Engineering and Operations Management (IMEOM), Dhaka, Bangladesh, December 26-27, 2020, Organized by IEOM Society of Bangladesh

---

Citation should be written as:Author(s) Last Name, Author(s) First Name Initial(s), ‘Title of paper”, Proceedings of the Third International Conference on Industrial & Mechanical Engineering and Operations Management (IMEOM), Dhaka, Bangladesh, December 26-27, 2020, pp XX-XX.

---

Papers and Abstracts

ID 152 Analytical Solution of a Prestressing Strand Subjected to Axial Strain

Yusuf Aytaç Onur, Department of Mechanical Engineering, Zonguldak Bulent Ecevit University, Zonguldak, Turkey
Abdullah Tombak, Department of Motor Vehicles and Transport Technologies, Zonguldak Bulent Ecevit University, Zonguldak, Turkey

ID 210 A Concise Literature Review on Comparison between Lean Manufacturing and Six Sigma with Their Separate and Combined Applications to A Few Specific Industrial Sectors

Nafiz Afsan, Md. Abdul Aziz, and A.R.M. Harunur Rashid, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh

ID 223 Sustainable Implementation of Green Supply Chain Management in the RMG Sector of Bangladesh: A Literature Review

Md. Raisul Islam Atik, Md Asif Ahmed, Md. Samawat Ahsan Mashiyat and A.R.M. Harunur Rashid, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh

ID 242 Literature Review on LCA of LPG as a Transportation and Cooking Fuel

Fahim Shahrier,Ishrat Jahan Eva,Afrin Mahi,Chowdhury Sadid Alam, and A.R.M. Harunur Rashid, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh

ID 115 A Sustainability Approach in the Development of Coal Blend Model for Subcritical Pulverized Coal Fired Power Plants in the Philippines

Marvin I. Noroña and Annabelle R. Laureta, School of Industrial Engineering and Engineering Management, Mapua University, Philippines

ID 117 Employee Perception on the Effects of Corporate Social Responsibility on the Sustainability Performance of Food and Beverage Companies in the Philippines

Joachim Victor V. Nepomuceno, Mac Manroe L. Leonador and Marvin I. Noroña, School of Industrial Engineering and Engineering Management, Mapua University, Manila, 658 Muralla St., Intramuros, Manila 1002, Philippines

ID 124 Potential effectiveness of quality tools and techniques to introduce Total Quality Management (TQM) in ready-made garment (RMG) manufacturing industries in Bangladesh

Md Mazharul Habib, Michele Cano, Evi Viza and Andisheh Bakhshi, School of Computing Engineering and Physical Sciences (CEPS), University of the West of Scotland (UWS), Paisley, UK

ID 129 Corporate Rating Model using Threshold Optimization and XGBoost

Anda Zhang, Department of Industrial Engineering and Management, Graduate School of Engineering, Kanagawa University, Kanagawa, Japan

Hirohisa Hirai, Department of Industrial Engineering and Management, Faculty of Engineering, Kanagawa University, Kanagawa, Japan

Masanobu Matsumaru, Research Institute for Engineering, Kanagawa University, Kanagawa, Japan

Hideki Katagiri, Department of Industrial Engineering and Management, Faculty of Engineering, Kanagawa University, Kanagawa, Japan

ID 138 Effects of Side Wall Inclination Angle on Transition Mixed Convection in a Lid-Driven Trapezoidal Cavity

Enamul Hasan Rozin, Hasib Ahmed Prince, Emdadul Haque Chowdhury and Sumon Saha, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh

ID 140 A Mathematical Model to Investigate the Frequent Impact of Global Warming on Coastal Lives    

Sajib Mandal, Department of Mathematics, Bangabandhu Sheikh Mujibur Rahman Science and Technology University, Gopalganj-8100, Bangladesh

Md. Sirajul Islam, and Sonia Akter, Department of Mathematics, Bangabandhu Sheikh Mujibur Rahman Science and Technology University, Gopalganj-8100, Bangladesh

Md. Haider Ali Biswa, Mathematics Discipline, Science Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh

ID 144 Impact of COVID-19 Pandemic on Plastic Grocery Bag Supply Chain, Usage, and Long-Term Effects

Astrid Jouret, Hannah Carlile, Jack Maughan, Madeleine Schmidhauser, Michael Wu and Mohamed Awwad, Industrial and Manufacturing Engineering Department, California Polytechnic State University, San Luis Obispo, CA 93407, United States

ID 145 Review of the Effect of COVID-19 on the American Semiconductor Industry Supply Chain

Corey Rumbaugh, Jacob Hrbek, Malia Hickey, Natali Markowitz, Trevor Howell and Mohamed Awwad, Industrial and Manufacturing Engineering Department, California Polytechnic State University , San Luis Obispo, CA 93407, USA

ID 151 Automated Bread Maker: Implementing Techniques of Product Design Process

Shahriar Tanvir Alam, Lecturer, Department of Industrial and Production Engineering, Military Institute of Science and Technology, Mirpur Cantonment, Dhaka-1216, Bangladesh

ID 152 Analytical Solution of a Prestressing Strand Subjected to Axial Strain 

Yusuf Aytaç Onur, Department of Mechanical Engineering, Zonguldak Bulent Ecevit University, Zonguldak, Turkey

Abdullah Tombak, Department of Motor Vehicles and Transport Technologies, Zonguldak Bulent Ecevit University, Zonguldak, Turkey

ID 153 Increased Reshoring Efforts in Response to Global Emergencies  

Michaela Fromm, Emily Johnson, Sascha Keir, Jack Lugo, Tatum Shore and Mohamed Awwad, Industrial and Manufacturing Engineering Department, California Polytechnic State University, San Luis Obispo, CA 93407, USA

ID 154 The Impact of COVID-19 on Food Security and Delivery in the California Central Coast Region

Peter Bishop, Maria Brown, Sean Love, Keven Nieto-Ramirez, Bruno Zac
and Mohamed Awwad, Industrial and Manufacturing Engineering Department, California Polytechnic State University, San Luis Obispo, CA 93407, USA

ID 155 Meat Shortage in the United States: A Review of the Effects of COVID-19 on the Meat Industry

Adriel Campuzano, Cynthia Hueso-Fernandez, Kwan M.  Lim, Hernan Rodriguez, Alicia M. Sisco and Mohamed Awwad , Department of Industrial and Manufacturing Engineering, California Polytechnic State University, San Luis Obispo, CA 93407, USA

ID 157 Impact of COVID-19 on Cleaning Supplies

Brandon Yowakim, Jack Ng, Kayla Tsang, Morgan Cameron and Mohamed Awwad, Industrial and Manufacturing Engineering Department, California, Polytechnic State University, San Luis Obispo, CA 93407, USA

ID 159 A Competency-Based Management Approach to Employee Training & Development: A Strategic Business Unit Case for Mergers and Acquisition

Maritess P. Gomez and Marvin I. Noroña, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 161 Optimum Design of a Capsule Shaped Proving Ring having a Load Measuring Capacity of 250 Tonnes: An Analytical Approach

Muhammad Ashiqur Rahman and Hasib Ahmed Prince, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh

ID 163 Numerical Simulation of Laminar Mixed Convection in a Vented Prismatic Room

Rashadul Islam Ritu, Enamul Hasan Rozin, Sumon Saha and Sheikh Mohammad Shavik, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh

ID 165 Mathematical Modeling on Interrelation between Ultraviolet Radiation and Skin Cancer

Tahera Parvin and Md. Haider Ali Biswas, Mathematics Discipline, Science Engineering and Technology School, Khulna University,  Khulna-9208, Bangladesh

ID 166 Mathematical Analysis of Reservoir-Mediator-Human Transmission for Dynamical Model of COVID-19

Joy Bakshi, S M Shaheduzzaman Ayon, and Md. Haider Ali Biswas, Mathematics Discipline, Science Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh

ID 167 Fabrication of Cost-Effective Prosthetic Arm Using Electroencephalography Signal

Shihab Ahmed, Animesh Mitra, Sumon Saha and Md. Afsar Ali, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh

Arnab Bhattacharjee, Department of Electrical and Electronics Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh

ID 168 Prediction of the Best Tensile and Flexural Strength of Natural Fiber Reinforced Epoxy Resin Based Composite Using Taguchi Method

Sk. Suzauddin Yusuf, M.Sc. Student, Department of Mechanical Engineering, Rajshahi University of Engineering and Technology (RUET), Rajshahi-6204, Bangladesh and Mechanical Engineering Department, Nuclear Power Plant Company Bangladesh Limited (NPCBL), Rooppur, Ishwardi, Pabna, Bangladesh

Md. Nurul Islam, Department of Mechanical Engineering, Rajshahi University of Engineering & Technology (RUET), Rajshahi-6204, Bangladesh

Md Washim Akram, Department of Mechanical Engineering, Bangladesh Army University of Science and Technology (BAUST), Saidpur-5310, Bangladesh

Md. Hasan Ali, Department of Industrial and Production Engineering, Bangladesh Army University of Science and Technology (BAUST), Saidpur-5310, Bangladesh

Md. Abubakar Siddique, Department of Industrial and Production Engineering, Bangladesh Army University of Science and Technology (BAUST), Saidpur-5310, Bangladesh

ID 169 Mathematical Assessment for the Dynamical Model of Sexual Violence of Women in Bangladesh

Kazi Nusrat Islam, and Md. Haider Ali Biswas, Mathematics Discipline, Science Engineering and Technology School, Khulna University,  Khulna-9208, Bangladesh

ID 170 Mathematical Approach to Assess the Severity of Road Accidents in Bangladesh Using a SEIR-type Model

Kefayat Tasnim, Ankona Biswas, and Md. Haider Ali Biswas, Mathematics Discipline, Science Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh

ID 171 Impacts of Conventional Collection and Preservation Practices of Raw Materials in Leather Processing Industry of Khulna Region in Bangladesh

Abdullah Nayeem, Syed Ehtashamul Hoque, Abdullah Al Arman Chowdhury, Department of Leather Engineering, Khulna University of Engineering & Technology, Khulna, Bangladesh

ID  172 Numerical Analysis of Laminar Mixed Convection Inside a Vertical Plate Channel with Corrugated Side Walls

Tamanna AkterJui, Boshra Aziz and Sumon Saha, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh

ID 173 Finite Element Simulation of Turning Process and Subsequent Route for Optimization

Dibakar Sarker, Shams Abu Alam, Khalid Bin Mosharof and M. Azizur Rahman, Department of Mechanical and Production Engineering (MPE), Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh

ID 174 A Linear Programming Problem Analysis for Improving the Process and Quality of Nurse Rostering in the COVID-19 Unit of a City Hospital

Tasnia Biswas and Afifa Sumaya, Department of Industrial and Production Engineering (IPE), Bangladesh University of Engineering and Technology (BUET),  Dhaka, Bangladesh

ID 179 Synchronous Control of Maxon EPOS4 Positioning Controller Using NI LabVIEW and NI Industrial Communications for CANopen

Asif Al Zubayer Swapnil and Mohammad Habibur Rahman, Department of Mechanical Engineering, University of Wisconsin-Milwaukee, Milwaukee, WI, USA

ID 181 Factors Affecting the Maintenance Management Operations of a Leading Property Management Corporation: A Green IT Readiness Assessment Using Structural Equation Modeling

Marvin I. Noroña, Russel Royce A. Cipres, and Jan Karl C. Paglinawan, School of IE-EMG, Mapua University, 658 Muralla St. Intramuros, Manila, Philippines

ID 182 Developing an Omni-Channel Strategy for Social Enterprises in the Philippines

Marvin I. Noroña, Janine Paula M. Tabar, and Ma. Theresa Angelie P. Eugenio, School of Industrial Engineering and Engineering Management, Mapúa University, 658 Muralla St. Intramuros, Manila, Philippines

ID 183 Optimal Control Strategies Applied to Slow Down the Multiple Antibiotic Resistance in Human Body

Khan Anik Islam and Md. Haider Ali Biswas, Mathematics Discipline, Science Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh

ID 184 Modeling and Analysis of the Dynamic Progress of Chronic Lung Cancer Due to Smoking

Jobayer Ahmed and Md. Haider Ali Biswas, Mathematics Discipline, Science, Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh

ID  185 Optimal Control Strategies for Reducing Dengue Virus Infection in Bangladesh
Kazi Tahmid Belal and Md. Haider Ali Biswas, Mathematics Discipline, Science, Engineering and Technology School, Khulna University,  Khulna-9208, Bangladesh

ID 188 E-waste estimation: A case study of Shahjalal University of Science & Technology, Sylhet-3114, Bangladesh

Mohammad Iqbal, Faysol Siddique and Dipika Biswas, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet-3114, Bangladesh

ID 196 Investigating the Feasibility of Stand-Alone Solar-Natural Gas Hybrid Power Generation System for Remote Island

Md. Hasan Ali, Department of Industrial and Production Engineering, Bangladesh Army University of Science and Technology, Saidpur-5310, Bangladesh

Sk. Suzauddin Yusuf, Mechanical Engineering Department, Nuclear Power Plant Company Bangladesh Limited, Rooppur, Ishwardi, Pabna, Bangladesh

Md. Washim Akram,Department of Mechanical Engineering, Bangladesh Army University of Science and Technology, Saidpur-5310, Bangladesh

Tanveer Mahmud Silva, Undergraduate Student, Department of Industrial and Production Engineering, Bangladesh Army University of Science and Technology, Saidpur-5310, Bangladesh

ID 198 Service Development Strategy Using QFD For Customer Satisfaction In A Bank

Chowdury M. Luthfur Rahman, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh

Md. Sagar Islam Khan, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh

Md. Jehad Islam, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh

Sheikh Nova, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh

ID 200 Forecasting Rainfall of Monsoon Season with Artificial Neural Network

Noor-E-Zannat, Raju Mondal and Munnujahan Ara, Mathematics Discipline, Science Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh

ID 203 A Review Study on Various Types of Flute Shapes Used in Corrugated Paperboards Used for Packaging

A.S.M Redwan Haider, Tamzeed Ahmed Alvy and Sajjad Mahmud Shourav, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), OIC, Gazipur, Bangladesh

ID 208 Lean Logistics Strategy for the Ready Made Garments (RMG) Industry of Bangladesh: Review and a Proposed Enhanced Strategy

Md Tawhid Aziz, SkTahmid Shahriar, F.M. Farhan Faiyaz, AseerNehalul Islam and A.R.M. Harunur Rashid, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh

ID 210 A Concise Literature Review on Comparison between Lean Manufacturing and Six Sigma with Their Separate and Combined Applications to a Few Specific Industrial Sectors

Nafiz Afsan, Md. Abdul Aziz and A.R.M. Harunur Rashid, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh

ID 215 Different Perspectives Of The Upcoming Industrial Era and Current Trends in Cyber-Physical System: A Review

Ahmad F.A. Md. Hezam, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh

Abrar Sobhan Chowdhury, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh

Muhammad Waqas, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh

ID 217 Manufacturing Processes of Solution-processed Organic Solar cells and Recent Advances

Mashrur Muntasir Nuhash, Ibthisum Alam, and Aseer Nehal-ul Islam, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh

ID 222 Transportation Cost Minimization using Transportation Method by optimizing Job Assignment

S.M. Samiul Bashir Shihab and Fahim Shahrier, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh

ID 223 Sustainable Implementation of Green Supply Chain Management in the RMG Sector of Bangladesh: A Literature Review

Md. Raisul Islam Atik, Md Asif Ahmed, Md. Samawat Ahsan Mashiyat and A.R.M. Harunur Rashid, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh

ID 228 Optimization of Vendor Rate Analysis Method by Visual Basic Applications (VBA): A Case Study of Footwear Industry

Muhammad Ahmed Kalwar, Post Graduate Alumini (MUET) & Assistant Manager Production, Shafi Private Limited, Lahore, Punjab, Pakistan

Shakeel Ahmed Shaikh, Associate Professor & Co-director (Post Graduate Studies), Department of Industrial Engineering & Management, Mehran UET, Jamshoro, 76062, Sindh, Pakistan

Muhammad Ali Khan, Post Graduate Student & Assistant Professor, Department of Industrial Engineering & Management, Mehran UET, Jamshoro, 76062,Sindh, Pakistan

Tanveer Sarwar Malik, Executive Officer (Planning & Costing), Starlet Shoes Private Limited, Lahore, Punjab, Pakistan

ID 234 Design and Control of an Electrically Powered Knee Prosthesis by Taking Feedback from a Fully Functional Leg

K.B.M. Sharif Mahmood, A.M. Imrul Hasan, Shahrin Iqbal, Sourav Pal and Md Ishfak Tahmid, Department of Electrical and Electronic Engineering, Shahjalal University of Science and Technology (SUST), Sylhet-3114, Bangladesh

ID 241 Optimization Processes & Analysis of Impact on Productivity: A Literature Review

Md. Shihabul Islam, Abid Hassan and A.R.M. Harunur Rashid, Department of Mechanical & Production Engineering (MPE), Islamic University of Technology (IUT), Board Bazar, Gazipur 1704, Dhaka, Bangladesh

ID 242 Literature Review on LCA of LPG as a Transportation and Cooking Fuel 

Fahim Shahrier,Ishrat Jahan Eva,Afrin Mahi,Chowdhury Sadid Alam, and A.R.M. Harunur Rashid, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh

ID 253 Optimal Site Selection for Solar Farm Using GIS and AHP: A Literature Review

Nabila Tabassum Suprova, MD. Abidur Rahman Zidan, and A.R.M. Harunur Rashid, Department of Mechanical & Production Engineering (MPE), Islamic University of Technology (IUT), Board Bazar, Gazipur 1704, Dhaka, Bangladesh

ID 256 A Review of Trans-critical CO2 refrigeration cycle

A.N.M Nihaj Uddin Shan, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh

ID 259 Statisital Analysis of the Impact of Penalties in Driving: A Case Study

Muhammad Ahmed Kalwar, Post Graduate Alumini (MUET) & Assistant Manager Production, Shafi Private Limited, Lahore, Punjab, Pakistan

Shakeel Ahmed Shaikh, Associate Professor & Co-director (Post Graduate Studies), Department of Industrial Engineering & Management, Mehran UET, Jamshoro, 76062, Sindh, Pakistan

Muhammad Ali Khan, Post Graduate Student & Assistant Professor, Department of Industrial Engineering & Management, Mehran UET, Jamshoro, 76062,Sindh, Pakistan

ID 260 Exploring the Potential of Six Sigma in Minimizing the Production Defects

Pawan Kumar, Under Graduate Final Year Student & Assistant Group Leader (Final Year Thesis), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan

Muhammad Ali Khan,Assistant Professor & PhD Scholar, Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan 

Usama Khursheed Mughal, Under Graduate Final Year Student & Group Leader (Final Year Thesis), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan

Suneel Kumar, Under Graduate Final Year Student & Group Member (Final Year Thesis), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan

ID 261 Review of Lean Tool of Total Productive Maintenance (TPM) in Manufacturing Sector

Shahryar Irfan Virk, Under Graduate Final Year Student & Assistant Group Leader (Final Year Thesis), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan

Muhammad Ali Khan, Assistant Professor & PhD Scholar, Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan

Tahir Hussain Lakho, Under Graduate Final Year Student & Group Leader (Final Year Thesis), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan

Aamir Ali Indher, Under Graduate Final Year Student & Group Member (Final Year Thesis), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan

ID 263 Internal dry cutting tool

Mohammad Sadeq, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur,Dhaka, Bangladesh

Hameedullah, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh

Yaya Ousmanu, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh