Conference Committee

Conference Patrons/ Honorary Chairs

Prof. N V Ramana Rao, Director, NIT, Warangal, India
Prof. Katta Narasimha Reddy, Vice-Chancellor, JNT University, Hyderabad, India

Conference Chairs

Dr. V. Vasu, Associate Professor, Department of Mechanical Engineering, NIT, Warangal, India
Dr. M. Manzoor Hussain, Registrar, JNTU, Hyderabad, India
Dr. Qutubuddin S.M., Associate Professor, P.D.A. College of Engineering, Kalaburagi, India
Dr. Ahad Ali, Executive Director, IEOM Society, Michigan, USA

Program Chairs

Dr. Shekar Babu, Founding Head, AMRITA School of Business, AMRITA Vishwa Vidyapeetham University, Bangalore, India
Prof. A Kumar, Head of Department, Mechanical Engineering, NIT, Warangal, India
Prof .M. Indira Rani, Head, Department of Mechanical Engineering JNTU, Hyderabad, India
Prof. Don Reimer, Adjunct Professor, Lawrence Tech, Michigan, USA
Prof. Devdas Shetty, Dean & Professor, Department of Mechanical Engineering, University of District of Columbia, USA

Technical Chairs

Dr. L Krishnanand, Department of Mechanical Engineering, from NIT, Warangal, India
Dr. G. Krishna Mohana Rao, Mechanical Engineering Department, JNTU, Hyderabad, India
Prof. G Anand , Professor , Quantitative methods and Operations Management, IITM, Kozhikode, India
Dr. G Naga Srinuvasulu, Department of Mechanical Engineering, NIT, Warangal, India

Industry Chairs

Dr. Phani Raja Kumar Katuru, Project Manager, Tech Mahindra Americas Inc, Dallas, TX., USA
Dr. Gururaj Telasang,, Scientist F, ARCI, Hyderabad
Dr. N Kishore Nath, Scientist G, Project Director, ASL DRDO, Hyderabad
Mr. I Ahmed Khan, Project Manager, Tata Technologies, Pune

Women in Industry and Academia Chairs

Dr. V Rama Devi, Associate Professor, School of Management, NIT, Warangal, India
Dr. Sindhu, Director, School of Management Studies, JNTU, Hyderabad, India
Mrs. Sashi Sairaman, Chief Executive Officer, MTAB, Chennai, India
Mrs. L Rama Devi, Director, Emerging Technologies, Cybersecurity COE, Telangana State, Hyderabad

Organizing Committee

Dr. Vivek Soni, Associate Professor, Jaipuria School of Business, Ghaziabad, Uttar Pradesh, India

2023 Conference Chairs

Dr. M. Muzammil, Professor and Head, Department of Mechanical Engineering, Aligarh Muslim University, Aligarh, India – 2023 Honorary Chair
Dr. Abid Ali Khan, Professor, Department of Mechanical Engineering, Aligarh Muslim University, Aligarh, India – 2023 Conference Chair
Dr. Faisal Hasan, Professor, Department of Mechanical Engineering, Aligarh Muslim University, Aligarh, India – 2023 Conference Co-Chair

Indian Academic Committee (IAC) by State

Andhra Pradesh

Dr. T Babu Rao, Asst. Professor, Department of Mechanical Engineering, NIT Andhra Pradesh
Dr. T. Karthikeya Sharma, Department of Mechanical Engineering, NIT Andhra Pradesh
Dr. M Ravi Shankar, Department of Mechanical Engineering, IIT Tirupati
Prof. K Rama Krishna, Mechanical Engineering, KL University, Guntur

Arunachal Pradesh

Dr. Sahadev Roy, NIT Arunachal Pradesh

Assam

Dr. S N Joshi, Ass. Professor, Department of Mechanical Engineering, IIT Guwathi
Prof. Promod Kumar P, Department of Mechanical Engineering, NIT Silichar, ASSAM
Dr. Rahul Dev MIshra, Professor, Mechanical Engineering, NIT, SILCHAIR
Dr. Sougata Karmakar, Associate Professor, Ergonomics Division, IIT, Guwahati

Bihar

Dr. Akhillendra Singh, Asso. Professor, Mechanical Engineering, IIT Patna.
Dr. Atul Thakur, Asso. Professor, Mechanical Engineering, IIT Patna
Dr.Pradeep Kumar Bala, Professor, Indian Institute of Management (IIM), RANCHI

Chhattisgarh

Dr. G Srinivasu, Asst. Professor, Department of Mechanical Engg., NIT Raipur

Goa

Dr. Varinder Singh, Asst. Professor, BITS Pilani Goa Campus, Goa.

Gujarat

Prof. R. Venkata Rao, Professor, Department of Mechanical Engineering, SVNIT, Surat

Haryana

Prof. Sunil Jha, Mechanical Engineering, IIT Delhi

Himachal Pradesh

Dr. Somesh Sharma, Ass. Professor, Department of Mechanical Engineering, NIT Hamirpur
Dr. Rajiv Kumar Sharma , Ass. Professor, Department of Mechanical Engineering, NIT Hamirpur

Jharkhand

Dr. Dinesh Kumar Asst. Professor, Department of Production and Industrial Engineering, NIT, Jamshedpur

Jammu & Kashmir

Dr. Saad Parvez, Asso. Professor, Mechanical Engineering, NIT Srinagar
Dr. S Shiva, Asst. Professor, IIT Jammu

Karnataka

Dr. Qutubuddin S.M., Associate Professor, P.D.A. College of Engineering, Kalaburagi.
Dr. Shekar Babu, Professor, AMRITA School of Business, Bangalore
Dr. Virupaxi Bagodi, Principal, Government Engineering College, Talakal, Koppal Dist

Kerala

Prof. V Madhusudanan Pillai, Department of Production and Industrial Engineering, NIT Calicut
Dr. SIDHARTHA S. PHADI, Professor, Indian Institute of Management (IIM), KOZHIKODE
Dr.S.A.Binoosh, Professor, Mechanical Engineering Dept., College of Engineering, Trivandrum

Madhya Pradesh

Dr. Ajay Verma, Asst. Professor, Department of Mechanical Engineering, NIT Bhopal

Maharashtra

Prof. M S Kulkarni, Mechanical Engineering, IIT Bombay
Prof. Najmuddin Aamer, Professor, Theem College of Engineering, Boisar, Mumbai
Dr. RAUF IQBAL, Professor, NITIE, MUMBAI

Manipur

Dr. Anil Kumar Birru, Assistant Professor, Mechanical Engineering, NIT Manipur.

Meghalaya

Dr. R N Mahapatra, Ass. Professor, Mechanical Engineering, NIT Meghalaya
Prof. B B Biswal, Director, NIT Meghalaya

Mizoram

Dr. H.Lalhmingsanga, Asst. Professor, Mechanical Engineering, NIT Mizoram.

Nagaland

Dr. Rosang Pongen, Asst. Professor, Mechanical Engineering, NIT Nagaland

Odisha

Dr. B Surekha, Asst. Professor, Mechanical Engineering, KIIT, Bhubaneswar
Dr. V. Pandu Ranga, Ass. Professor, Mechanical Engineering, IIT, Bhubaneswar
Prof. Siba Sankar Mahapatra, Mechanical Engineering, NIT Rourkela
Dr.Santosh Kumar Prusty, Associate Professor, XIMB, Bhubaneshwar

Punjab

Dr. T Srinivas, Mechanical Engineering, NIT Jalandhar
Dr. Anish Kumar Sachdeva, Professor, Industrial & Production Engg. Dept. NIT, Jalandhar

Rajasthan

Dr. Rajeev Agrawal, Ass. Professor, Mechanical Engineering, MNIT Jaipur
Prof. K S Sangwan, Mechanical Engineering, BITS Pilani

Sikkim

Dr. Dipayan Das, Ast. Professor, Mechanical Engineering, NIT Sikkim

Tamil Nadu

Dr. V Anandakrishnan, Ass. Professor, Production Engineering, NIT Trichy.
Prof. G L Samuel, Mechanical Engineering, IIT Madras, Chennai

Telangana

Dr. V Vasu, Ass. Professor, Mechanical Engineering, NIT Warangal
Dr. M. Manzoor Hussain, Registrar, JNTU, Hyderabad
Prof. S Surya Kumar, Mechanical Engineering, IIT Hyderabad.
Prof. K Rama Krishna, Mechanical Engineering, KL University, Guntur

Tripura

Dr. Manish Bhargava, Asst. Professor, Mechanical Engineering, NIT Agartala

Uttar Pradesh

Prof. RRK Sharma, Industrial & Management Engineering, IIT Kanpur
Dr. Abid Ali Khan, Professor, Ergonomics Research Division, AMU, Aligarh
Dr. Faisal Hasan, Professor, Z.H.College of Engineering & Technology, AMU, Aligarh.

Uttarakhand

West Bengal

Dr. Bhaskar Bhandarkar, Director General, Institution for Innovation Industrial Engineering and Entrepreneurship India and Former Chairman Indian Institution of Industrial Engineering, Kolkata
Dr. Deepankar Sinha, Professor, Indian Institute of Foreign Trade, Kolkata

New Delhi

Dr. Abid Haleem, Professor, Mechanical Engineering Dept., Jamia MIllia Islamia University, New Delhi.
Dr.Arshad Noor Siddiqui, Professor, MED, JMI University, New Delhi

Global Engineering Education Chairs

Dr. K. Balasubramanian Principal Investigator and. Director NFTDC, Hyderabad

IEOM Global Supply Chain & Logistics Chairs

Prof. L Krishnanand, NIT Warangal

Industry 4.0 Chair

Dr. Rajeev Agrawal, Ass. Professor, Mechanical Engineering, MNIT Jaipur

Industry Solutions Chair

Dr. Madan Dabbeeru, senior Director, Rakuten, Bangalore

Conference Secretariat

Dr. Taufiqul Islam, Operations Manager, IEOM Society International

Website Coordinators

Christian Forrest, Manager of Web Services, Lawrence Technological University, Michigan, USA
Suvro Sudip, IEOM Webmaster, Michigan

Technical Parallel Sessions / Tracks

Track I : Industrial Engineering & Operations Management

Track Chairs:

Engineering Management
Inventory Management
Lean
Production Engineering
Supply Chain / Supply Chain Sustainability / Green Supply Chain
Operations Research
Product Lifecycle Management (PLM)
Six Sigma
Sustainable Manufacturing
Healthcare Operations and Services
Technology Management
Environmental Systems Engineering
Production Planning and Management
Quality
Reliability
Project Management
Statistical Process Monitoring
Logistics
Construction Management

Track 2 : Computer Integrated Manufacturing

Track chairs:

Automation and Agility
Cellular Manufacturing
Modelling and Simulation
Sensors and Sensing
Transportation and Traffic
Automotive Manufacturing Systems
Mechatronics & IIoT
Industry 4.0
Robotics
Systems Engineering
CAD, Applications and Computing
Systems Dynamics
Manufacturing science

Track 3 : Business Management

Track chairs

Human Factors and Ergonomics
Information Systems and Management
Financial Engineering
Statistics
Industrial Services
Innovation

Track 4 : Artificial Intelligence

Track chairs

Cyber Security
Data Analytics / Business Analytics
Decision Sciences

Track 5 : Energy

Track chairs

Dr. Vivek Soni, Associate Professor, Jaipuria School of Business, Ghaziabad, Uttar Pradesh, India

Renewable Energy sources
Oil and Gas
Fuel Cells
Electric vehicles
Heat transfer analysis of energy systems
Defence and Aviation
Automobile Engineering
IC Engines & Alternate Fuels

Track 6 : Manufacturing

Track Chairs

Additive Manufacturing
Subtractive
Non traditional Manufacturing Process
Advanced Materials process
Composite Materials

Advisory Committee

Dr. T.Kishen Kumar Reddy, JNTUH
Dr. A.V.Sita Rama Raju, JNTUH
Dr. K. Vijaya Kumar Reddy, JNTUH
Dr. B. Sudheer Prem Kumar, JNTUH
Dr. A.Chenna Kesava Reddy, JNTUH
Dr. B. Anjaneya Prasad, JNTUH
Dr. K Eshwara Prasad, JNTUH
Dr. S.S. Kalashetty, Principal, PDA College of Engineering, Kalaburagi
Dr. S.S. Hebbal, Professor, PDA College of Engineering, Kalaburagi
Pr. Moulay Larbi Abidi, École Mohammadia d’ingénieurs, Rabat, Morocco
Dr. Muhammad Abid, Ghulam Ishaq Khan Ins. of Eng. Sci. & Tech., Pakistan
Dr. Olufemi Adetunji, University of Pretoria, South Africa
Dr. Umar Al-Turki, KFUPM, Saudi Arabia
Dr. Ronald G. Askin, Arizona State University, USA
Dr. Mohammed Ben-Daya, KFUPM, Saudi Arabia
Dr. Abdul Talib Bon, Universiti Tun Hussein Onn Malaysia
Dr. Raj Das, University of Auckland, New Zealand
Dr. Kudret Demirli, Khalifa University, Abu Dhabi, UAE
Dr. Jose Arturo Garza-Reyes, University of Derby, UK
Dr. Alireza Ghasemi, Dalhousie University, Halifax, NS, Canada
Dr. Moncer Abdelhamid Hariga, American University of Sharjah, UAE
Dr. Mohammad D. Al-Tahat, The University of Jordan, Amman, Jordan
Dr. Arun Kumar, RMIT University, Australia
Dr. Jay Lee, University of Cincinnati, USA
Masaru Tezuka, Hitachi Solutions East Japan, Ltd., Sendai, Japan
Dr. Abu Masud, Wichita State University, Kansas, USA
Dr. Charles Mbohwa, University of Johannesburg, South Africa
Dr. Samar Mukhopadhyay, GSB-Sung Kyun Kwan University, Seoul, Korea
Dr. Nor Hasni Osman, Universiti Utara Malaysia
Dr. Leonard Perry, University of San Diego, USA
Dr. Ho Thanh Phong, International University – VNUHCM, Vietnam
Dr. Abdur Rahim, University of New Brunswick, Canada
Dr. Mehmet Savsar, Kuwait University, Safat, Kuwait
Dr. Rapinder Sawhney, University of Tennessee – Knoxville, USA
Dr. Rosemary Seva, De La Salle University – Manila, Philippines
Dr. Devdas Shetty, University of the District of Columbia, Washington, DC, USA
Dr. Hamid Seifoddini, University of Wisconsin-Milwaukee, USA
Dr. Alfredo Soeiro, University of Porto, Portugal
Dr. Robert de Souza, The Logistics Institute – Asia Pacific, Singapore
Dr. Masine Md. Tap, Universiti Teknologi Malaysia
Dr. Zulkifli Mohamed Udin, Universiti Utara Malaysia
Dr. Alok Verma, Old Dominion University, Norfolk, Virginia, USA
Dr. Hari Agung Yuniarto, Universitas Gadjah Mada, Indonesia
Dr. Li Zheng, Tsinghua University, China
Dr. Henk Zijm, University of Twente, Netherlands
Dr. Ravi Inder S Jassar, Birla Institute of Technology and Sci., Pilani, India

Program Committee – India

Faculty from NITW
Dr. M.S. Uppin, Head of Department, Industrial & Production, PDACE, Kalaburagi
Prof. Madhu Murthy K
Prof. Surya Prakash Rao CH
Prof. Bangarubabu Popuri
Prof. Srinivasa Rao S
Prof. Neelakanteswara Rao A
Prof. Venu Gopal A
Prof. Selvaraj N
Prof. Ravi Kumar Puli
Prof. G. Amba Prasad Rao
Prof. Srinadh K V S
Prof. Narasimha Rao R
Prof. Suresh Babu V
Sri. Gupta G R K
Sri. Ashokkumar Reddy I
Dr. Veeresh Babu A
Dr. Y. Ravi Kumar
Dr. Joseph Davidson M
Dr. Subhash Chandra Bose P
Dr P Vamsi Krishna
Dr. K Kiran Kumar
Dr. V. Rajesh Khana Raju
Dr. Srikanth Korla
Dr. Hari Kumar Voruganti
Dr. Devanuri Jaya Krishna
Dr. Satish Ben
Dr. Chandramohan V.P
Dr. Syed Ismail
Dr. T. Sadasiva Rao
Dr. Karthik Balasubramanian
Dr. Gujjala Raghavendra
Dr. Venkatesh Gudipadu
Dr. M Vijaya Kumar
Dr. P Suresh
Dr. Marrapu Bhargava
Dr. Hari Krishna. Chilukoti
Dr. Anant kumar Rai
Dr. Shivraman
Dr. Manjaiah M
Dr. Gangadharudu Talla
Dr. Gaurav Kumar Sharma
Dr. Satyanand Abraham
Dr. Thamarai Selvan
Dr. Prasanth Anand Kumar Lam
Dr. Chinige Sampath Kumar
Dr. M. Sreenivasa Rao, JNTUH
Dr. B. Balu Naik, JNTUH
Dr. J. Suresh Kumar, JNTUH
Dr. S. Naga Sarada, JNTUH
Dr. G.Krishna Mohana Rao, JNTUH
Dr. G. Satish Babu, JNTUH
Dr. AVSSKS Gupta, JNTUH
Dr. E. Ramjee, JNTUH
Dr. A. Aruna Kumari, JNTUH
Dr. P. Bhramara, JNTUH
Dr. M. Vidya Sagar, JNTUH
Dr. P. Prasanna, JNTUH
Sri. A. Balram Naik, JNTUH

Global Engineering Education Committee

Dr. Abu Masud, Boeing Global Engineering Professor, Industrial and Manufacturing Engineering Department, Wichita State University, Kansas, USA
Dr. Hamid Parsaei, Texas A&M University (College Station) and Qatar
Dr. Mukondeleli Grace Kanakana, University of South Africa
Dr. Syed Ahmad Helmi Al Haddad, Program Coordinator for MSc in Industrial Engineering and Associate Fellow, Center for Engineering Education (CEE), Universiti Teknologi Malaysia, Skudai, Johor, Malaysia
Dr. Mehmet Savsar, Professor, Department of Industrial and Management Systems Engineering, Kuwait University, Safat, Kuwait
Dr. Vitor M. Caldana, Professor, Depto. de Eletroeletrônica, IFSP – Instituto Federal de São Paulo – Campus Sorocaba, SP, Brazil
Dr. Jafri Mohd Rohani, Universiti Teknologi Malaysia
Dr. Chan Chee-Ming, Associate Professor and Deputy Dean (Academic and Research), Universiti Tun Hussein Onn Malaysia
Dr. Ilham Kissani, Faulty of Engineering & Management Science, Al Akhawayn University, Ifrane, Morocco
Dr. Ho Hwi Chie, Bina Nusantara University (Binus), Indonesia
Dr. Rosemary Seva, De La Salle University – Manila, Philippines
Dr. Jihong Yan, Professor in Industrial Engineering and Deputy Dean of School of Mechatronics Engineering, Head of intelligent Manufacturing Scientific Research Team, Harbin Institute of Technology, Harbin, China

Industry Solutions Committee

Dr. Zeki Ayağ, Kadir Has University, Turkey
Amine Belhadi, Industrial Engineering Research Team, Higher School of Technology, Safi, Cadi Ayyad University, Marrakech, Morocco
Sameh Moh. Nour El-Din A-Razek, Al Ezz Dekheila Steel Co., Alexandria, Egypt
Abdullah Y Dhafer, Aramco, Saudi Arabia
Natasha Dzulkarnain, Construction Research Institute of Malaysia
Dr. Kenichi Funaki, Hitachi, Yokohama, Japan
Dr. Adel Hejaaji, Engineering Services Management Limited, Essex, UK
Dr. Anwar Hossain, Daikin Applied, Minneapolis, Minnesota, USA
Ihfasuziella Ibrahim, Construction Research Institute of Malaysia (CREAM)
Dr. MAS Kamal, Toyota Central R&D Labs. Inc., Nagoya, Aichi, Japan
Hwa Kooi Kok, Intel Malaysia
Ali Massaeli, National Iranian Gas Company, Iran
German Moya, President at IEEE Costa Rica Section, Costa Rica
Paul Moore, International Mining, England, UK
Dr. Gerard O’Connor, Adelaide and Meath Hospital, Dublin, Ireland
Dr. Banu Ozkeser, Istanbul, Turkey
Dr. Sushil K. Shetty, Wilsonart LLC, Temple, Texas, USA
Masaru Tezuka, Hitachi Solutions East Japan, Ltd., Japan

Woman in Industry and Academia (WIIA) Committee

Resh Plaha, Crystal Quality, UK
Dr. Chan Chee-Ming, Associate Professor and Deputy Dean (Academic and Research), Universiti Tun Hussein Onn Malaysia
Dr. Mey Goh, Loughborough University, UK
Dr. Ilham Kissani, Faulty of Engineering & Management Science, Al Akhawayn University, Ifrane, Morocco
Dr. Stefanie Pillai, Dean and Associate Professo, Faculty of Languages & Linguistics, University of Malaya, Kuala Lumpur, Malaysia
Dr. Funda Sivrikaya Şerifoğlu, Bilgi University, Istanbul, Turkey
Dr. Adibah Shuib, Head of Strategic Planning (Monitoring), Centre for Strategic Planning,Universiti Teknologi MARA (UiTM)
Dr. Vanajah Siva, Chalmers University, Sweden
Vanessa Victoire, University of Mauritius
Prof. Soumaya Yacout, École Polytechnique de Montréal, Canada

Technical Committee

Prof. Avinash Sambrani, Industrial & Production Engineering, PDACE, Kalaburagi
Maram Al-Shammari, Department of Statistics and Operations Research, King Saud University, Riyadh, Saudi Arabia
Peter M. Tase, IFEES – GEDC Secretariat
Dr. A.O. Adewumi, University of KwaZulu-Natal, South Africa
Dr. Kondo H. Adjallah, Paul-Verlaine University, France
Dr. Abdollah Aghaie, K.N. Toosi University of Technology, Iran
Dr. Abdul-Rahman Al-Ali, American University of Sharjah, UAE
Gasim Al-Hawarii, Senior Fleet Management Engineer, Dubai Municipality, UAE
Ali I. Al-Mosawi, Miskolic University, Hungary
Dr. Basel Alsayyed, University of Alberta, Edmonton, Canada
Dr. Kuchkarov Atamurat, Uzbekistan National University, Uzbekistan
Dr. Faieza Abdul Aziz, Universiti Putra Malaysia, Selangor, Malaysia
Dr. Amir Azizi, Universiti Malaysia Pahang, Malaysia
Dr. Bandar A. Alkhayyal, Department of Engineering Management, College of Engineering, Prince Sultan University, Riyadh, Kingdom of Saudi Arabia
Amine Belhadi, Industrial Engineering Research Team, Higher School of Technology, Safi, Cadi Ayyad University, Marrakech, Morocco
Dr. Behnam Bahrami, Eastern Mediterranean University, Famagusta, Cyprus
Dr. D. K. Banwet, IIT-Delhi, India
Dr. Abdelaziz Berrado, The Ecole Mohammadia d’Ingénieurs, Rabat, Morocco
Dr. Mahdi Bashiri, Shahed University, Iran
Dr. Vladimir Beresnev, Sobolev Institute of Mathematics, Russia
Dr. Haider Ali Biswas, Khulna University, Bangladesh
Dr. Miguel Sanz Bobi, Comillas Pontifical University, Spain
Dr. Nejib Chouaibi, Polytechnic School of Tunisia, Tunisia
Dr. Mohammad Ishak Desa, Universiti Teknologi Malaysia
Dr. Omar Elmabrouk, Benghazi University, Libya
Dr. Dinusha Gamage, University of Moratuwa, Sri Lanka
Dr. Rodrigo Garrido, Universidad Adolfo Ibaez, Chile
Dr. Vassilis Gerogiannis, Department of Project Management, Greece
Dr. Jahara bint Ghani, UKM, Malaysia
Dr. Ravi Gor, St. Kabir Institute of Professional Studies, Ahmedabad, India
Dr. Kannan Govindan, University of Southern Denmark, Denmark
Dr. Md. Mamun Habib, Universiti Utara Malaysia
Dr. Ramy Harik, University of South Carolina, USA
Dr. Maruf Hasan, University of New South Wales, Australia
Dr. Ahmed Kadhim Hussein, Babylon University, Iraq
Dr. Javad Khamisabadi, Islamic Azad University, Tehran, Iran
Dr. Raja Kothandaraman, Alpha College of Engineering, Chennai, India
Dr. Brigitte Jaumard, Concordia University, Canada
Dr. Rashmi Jha, Gitarattan International Business School (GIBS), Affiliated to Guru Gobind Singh Indraprastha University, New Delhi, India
Dr. Shahrul B. Kamaruddin, Universiti Sains Malaysia
Dr. Francis Leung, City University of Hong Kong, China
Dr. Boudouda Malik, University of Champagne-Ardenne, France
Dr. Ilias Mamat, Quest International University Perak, Ipoh, Malaysia
Dr. Fulufhelo Masithulela, University of South Africa
Dr. Abderrahmane Mellak, University of Boumerdes, Algeria
Dr. Yuan Xue Ming, SIMTech: Singapore Institute of Manufacturing Technology, Singapore
Dr. Ruchi Mishra, Institute of Management, Nirma Univ., Ahmedabad, India
Dr. Vladimir Modrak, TUKE, Slovakia
Dr. Norhamidi Muhamad, UKM, Malaysia
Dr. Michael Mutingi, University of Botswana, Botswana
Dr. Arun N. Nambiar, California State University – Fresno, USA
Dr. Cecilia Nembou, Divine Word University, Papua New Guinea
Dr. Sawat Pararach, Thammasat University, Thailand
Dr. Eui H. Park, North Carolina A&T State University, USA
Dr. Md. Mizanur Rahman, Universiti Malaysia Sabah (UMS), Kota Kinabalu, Sabah, Malaysia
Dr. T. Ramayah, School of Management, Universiti Sains Malaysia
Dr. Raja Zuraidah Raja Mohd Rasi, Universiti Tun Hussein Onn Malaysia
Dr. Bhuvenesh Rajamony, University Malaysia Perlis (UniMAP), Malaysia
Dr. Mohd Abdur Rashid, University Malaysia Perlis (UniMAP), Malaysia
Dr. Syed Asif Raza, Qatar University, Qatar
Dr. Nubia Milena Velasco Rodriguez, Universidad de Los Andes, Colombia
Dr. P. Sanjeevikumar, Dublin Institute of Technology, Ireland
Dr. Mahmood Shafiee, Cranfield University, Bedfordshire, United Kingdom
Dr. Ahm Shamsuzzoha, University of Vaasa, Finland
Dr. Abdussalam Shibani, Coventry University, UK
Dr. Sarbjit Singh, National Institute of Technology, Jalandhar, Punjab, India
Dr. Shahryar Sorooshian, University of Gothenburg, Sweden
Dr. Jayakanth Srinivasan, MIT Sloan School of Management
Dr. Gopalan Srinivasan, University of New Brunswick, Canada
Dr. Zuraidah Sulaiman, Universiti Teknologi Malaysia
Dr. Balan Sundarakani, University of Wollongong in Dubai, UAE
Laurent Tchommo, Operations Management, Department of CIS & BSAN, College of Business, James Madison University, VA, USA
Dr. Murat Caner Testik, Hacettepe University, Ankara, Turkey
Dr. Theodore B. Trafalis, University of Oklahoma, USA
Dr. Vladimir I. Tsurkov, Russian Academy of Sciences, Moscow, Russia
Dr. Hui-Ming Wee, Chung Yuan Christian University, Taiwan
Dr. Yong Yin, Yamagata University, Japan
Dr. Norzaidahwati Zaidin, Universiti Teknologi Malaysia, Johor, Malaysia
Dr. Suhaiza Hanim Zailani,University Malaya, Malaysia
Dr. Linda L. Zhang, IESEG School of Management, Lille-Paris, France
Dr. Ali Mostafaeipour, Associate Professor, Industrial Engineering Department, Yazd University, Yazd, Iran

Session Chairs

Track I: Industrial Engineering & Operations Management

Dr. M Indira Rani
Professor & Head
Department of Mechanical Engineering
JNTUH UCEH
Hyderabad

Dr. M Sreenivasa Rao
Professor of Mechanical Engineering
JNTUH UCEH
Hyderabad

Track 2: Computer Integrated Manufacturing

Dr. A Chennakesava Reddy
Professor of Mechanical Engineering
JNTUH UCEH
Hyderabad

Dr. G Krishna Mohana Rao
Professor &, Director, SCDE
JNTUH UCEH
Hyderabad

Dr. J suresh Kumar
Professor & Deputy Director (UIIC)
JNTUH UCEH
Hyderabad

Track 3: Business Management

Dr. Sindhu
Professor, Director I/c
BoS Chairperson & Coordinator-SMS Alumni Association

Track 4: Artificial Intelligence

Dr. D Vasumathi
Professor & Head
Computer Science and Engineering
JNTUH UCEH
Hyderabad

Dr. V Kamakshi Prasad
Professor & BOS Chairperson
Computer Science and Engineering
JNTUH UCEH
Hyderabad

Track 5: Energy

Dr. M T Naik
Professor & Vice – Principal
JNTUH UCEH
Hyderabad

Dr. K V Sharma
Professor
Center For Energy Studies
JNTUH UCEH
Hyderabad

Dr. A V S S K S Gupta
Professor & Director, IQAC-JNTUH
Mechanical Engineering
JNTUH UCEH
Hyderabad

Dr. E Ramjee
Professor & Deputy Director (Admissions)
JNTUH UCEH
Hyderabad

Dr. Aruna Kumari
Professor & Addl. CE
JNTUH UCEH
Hyderabad

Track 6: Manufacturing

Dr. B Anjaneya Prasad
Professor of Mechanical Engineering
JNTUH UCEH
Hyderabad

Dr. B Balu Naik
Professor & Director, UFR
Mechanical Engineering
JNTUH UCEH
Hyderabad

Dr. P Prasanna
Assistant Professor & Additional Controller of Examinations
Mechanical Engineering
JNTUH UCEH
Hyderabad