Istanbul 2022
  • Home
  • Authors
  • Program
    • Pre-Conference Workshops
  • Registration
  • Committee
  • Competitions
    • Undergraduate Paper Competition
    • Graduate Paper Competition
    • Master Thesis Competition
    • Doctoral Dissertation Competition
    • Senior Design Project Competition
    • Undergraduate Research Competition
    • High School STEM Competition
    • Lean Six Sigma Competition
    • Simulation Competition
    • Supply Chain Competition
    • Poster Competition
    • Human Factors and Ergonomics Competition
    • COVID-19 Competition
  • Keynote
  • Global Engineering Education
  • SCM
  • Industry 4.0
  • Panels
  • Sponsors
Home» Proceedings

Proceedings

Proceedings – 12th Annual Istanbul 2022

ISSN: 2169-8767 (U.S. Library of Congress)                  ISBN: 978-1-7923-6131-9


ID 2  Texture Analysis of Electrical Discharge Machined (EDM) surfaces using vision system
M.B.Kiran, Department of Mechanical Engineering, School of Technology, Pandit Deendayal Energy University, Gandhinagar, Gujarat, India

ID 6     Exploring AI Application Location in Oil and Gas Supply Chain
Thejas Vivek, Faculty of Engineering, Qatar University, Doha, Qatar

Ahmed Deif, Department of Industrial Technology and Packaging, California Polytechnic State University, San Luis Obispo, CA 3407, USA

ID 8    Weaponizing Cost of Quality of Food Manufacturers: Implications for Organizational Performance
Ayham A.M. Jaaron, Senior Lecturer in Business and Management, Department of Management and Entrepreneurship, The Centre for Enterprise and Innovation, Leicester Castle Business School, De Montfort University, Leicester, LE2 7BY, United Kingdom

Niveen Mohammed Ghunaim, Quality Management Program, Faculty of Graduate Studies, Arab American University, West Bank, Palestine

ID 9   Green Asphalt Pavement Mix Design for Kuwait
Sharaf AlKheder, Professor in Civil Engineering, Faculty of Engineering and Petroleum, Kuwait University, P.O. Box-5969, 13060, Safat, Kuwait

ID 10    Research on Cultivation Planning Based on Resource Sharing Among Fruit Growers
Kotomichi Matsuno, Department of Business Design and Management, Graduate School of Creative Science and Engineering, Waseda University, 3-4-1 Okubo, Shinjuku-ku, Tokyo, Japan

ID 11   Spatial-Temporal Coverage Planning for Universal Infrastructure Services
Hiroyuki Goto, Department of Industrial and Systems Engineering, Hosei University, Koganei, Tokyo, Japan

Taiki Otsuka, Faculty of Business Design and Informatics, Tsukuba Gakuin University, Tsukuba, Ibaraki, Japan

Yoichi Shimakawa, Department of Computer Science and Technology, Salesian Polytechnic, Machida, Tokyo, Japan

ID 12    Solution Method for a Max-min-plus Scaling Scheduling Problem by Formula Manipulation
Kyohei Sagawa, Faculty of Information & Management Systems Engineering, Nagaoka University of Technology, Nagaoka, Niigata, Japan

Hiroyuki Goto, Department of Industrial & Systems Engineering, Hosei University, Koganei, Tokyo, Japan

Yoichi Shimakawa, Department of Computer Science & Technology, Salesian Polytechnic, Tokyo, Japan

ID 13   Optimizing the Compliance of Critical COVID-19 Preventive Measures in Airport Facilities Layout: A Hybrid Approach Using VIKOR, SLP, and CRAFT

Anas A. Makki,Associate Professor of Industrial Engineering,  Department of Industrial Engineering, Faculty of Engineering — Rabigh Branch, King Abdulaziz University, Jeddah 21589, Saudi Arabia

Khaled A. Alshehri, Ahmed A. Albukhari, Abdulrahman I. Alatiq and Mazen G. Aldalbahi, Department of Industrial Engineering, Faculty of Engineering — Rabigh Branch, King Abdulaziz University, Jeddah, Saudi Arabia

ID 14    Integration of Smart Data Analytics in the Product Development Process of Small and Medium-sized Enterprises (SMEs)
Ingo Vincent Dietz von Bayer, Lena Feindler and Roland Jochem, Technical University of Berlin, Department of Quality Sciences, Pascalstr. 8-9 10587 Berlin, Germany

Jasmin Ohlig and Bert Leyendecker, University of Applied Sciences Koblenz, Faculty of Operations Management, Konrad-Zuse-Str. 1, 56075 Koblenz, Germany 

ID 22    Upcycling Design Process and Classification of Upcycling Method as Innovation to Extend Product Lifecycle

Christabel Annora Paramita Parung and Viviany Viviany, Faculty of Creative Industries, University of Surabaya, Surabaya, Indonesia 

Gaymas Vicka Arda Enantiomery, Fashion and Lifestyle Product Design, Faculty of Creative Industries, University of Surabaya Surabaya, Indonesia

ID 26   Tuned Mass Damper to Control Hand-Arm Vibrations of Hand-Held Tools
Ahmed Abu Hanieh, Full Professor of Mechanical Engineering, Faculty of Engineering and Technology, Birzeit University, Birzeit, Palestine  

ID 31   Total Cost of Ownership Framework for Procurement of buses in Public Transportation
Mansoor Jahangir Ahmed Khan, Graduate Student of Engineering Management, College of Engineering, Qatar University, Doha, Qatar

Nuri Onat, Qatar Transportation and Traffic Safety Research Center, College of Engineering, Qatar University, Doha, Qatar

ID 32   An Airport Gate Reassignment Model with Gate Disruptions
Dursen Deniz Poyraz and Meral Azizoğlu, Department of Industrial Engineering, Middle East Technical University, Ankara, Turkey 

ID 33   Social Networking: Strategies for Exploring Innovation in the Indonesian Manufacturing Industry
Maria Pampa Kumalaningrum, Management Doctoral Program-Faculty of Economic and Business, Universitas Gadjah Mada (UGM), Yogyakarta, Indonesia, Department of Management-Faculty of Economic and Business, STIE Yayasan Keluarga Pahlawan Negara (STIE YKPN), Yogyakarta, Indonesia

Wakhid Slamet Ciptono, Nurul Indarti, and Boyke Rudy Purnomo, Department of Management-Faculty of Economic and Business, Universitas Gadjah Mada (UGM), Yogyakarta, Indonesia

ID 35   Development of an Airport Service Quality and Efficiency Tool: A Comparison Based on Passenger Perceptions During Pre-pandemic and Pandemic Operations
Richard C. Li, Faculty of Industrial and Systems Engineering, Department of Industrial and Systems Engineering, De La Salle University – Manila, Manila, Philippines

Justin Christopher Javelosa, Endrei Clyne Mercullo, Julian Clement Tan and Trisha Lauren To Chip, Undergraduate Student – Industrial Engineering, Department of Industrial and Systems Engineering, De La Salle University – Manila, Manila, Philippines

ID 37   Stock Market Efficiency – An Information System Perspective A Systematic Literature Review
Malithi Thudewatta and Suren Peter, Department of Industrial Management, Faculty of Science, University of Kelaniya, Sri Lanka

ID 38   Digital Twins Application in The Post-Harvest Supply Chain of Fruits and Vegetables: A Systematic Review of the Literature
Barrientos Barraza Rodolfo, Odar Chang Pedro Rodrigo and Garcia-Lopez Yvan Jesus, Faculty of Architecture and Industrial Engineering, University of Lima, Lima, Peru

ID 39   Bibliometric analysis of publications related to pharmaceutical supply chain before and after the Covid-19 pandemic in the period 2010-2021
Sovero Castro Lucia Isabel, Risco Guevara Fabiola Milagros and Garcia-Lopez Yvan Jesus, Facultad de Ingeniería y Arquitectura, Carrera de Ingenieria Industrial, Universidad de Lima, Lima, Peru

ID 41   Omni-Channel Fulfillment Models
Bahriye Cesaret, Assistant Professor of Operations Management, Faculty of Business, Ozyegin University, Istanbul, Turkey

Armagan Bayram, Assistant Professor of Industrial Engineering, College of Engineering & Computer Science, University of Michigan at Dearborn, Dearborn, Michigan, USA

ID 42   IT Service Level Optimization: A Case Study
Ayfer Başar, Industrial Engineering, Management Faculty, Istanbul Technical University, Istanbul, Turkey

ID 43   High Performance DC-DC Buck Converter Based on Sliding Mode Control
Hussain Attia, Department of Electrical and Electronic Engineering, School of Engineering, American University of Ras Al Khaimah, Ras Al Khaimah, United Arab Emirates

ID 45       Development of an Agent-based Simulator for Digital Supply Chain Twins

Takahiro Ogura, Tazu Nomoto, Akihisa Tsujibe, Atsuki Kiuchi, Hitachi, Ltd. Research and Development Group, Production System Research Dept.

Takahiro Ogura, School of Knowledge Science, Japan Advanced Institute of Science and Technology (JAIST)

ID 46       An Investigation of Digital Twin Adoption for Enhancing Supply Chain Resilience

Senthilkumar Thiyagarajan, PhD Candidate, Department of Technology Leadership and Innovation, Purdue University, West Lafayette, Indiana, USA

Chad Laux, Associate Professor, Department of Computer and Information Technology, Purdue University, West Lafayette, Indiana, USA

Nathan Hartman, Dauch Family Professor of Advanced Manufacturing and Head, Department of Computer Graphics Technology, Purdue University, West Lafayette, Indiana, USA

ID 47       The Study of Factors Affecting the Issuance of COVID-19 Vaccine Passport in The Context of Thailand

Pawinee Siraphuriphat, Cluster of Logistics and Rail Engineering, Faculty of Engineering, Mahidol University, Nakhon Pathom, Thailand

Associate Prof. Dr. Duangpun Kritchanchai, Associate Professor, Director, Centre of Logistics management and Healthcare Supply Chain, Mahidol University, Nakhon Pathom, Thailand

ID 48       Analysis of Maintenance Management Implementation and Strategy Conceptualization: A Case Study of Hospitals’ Maintenance Management in Indonesia

Indesta Aulia Hendra Putri, Gerald Giovanni Raditya Gita, Nathaniel Viandy Dondokambey, Zharalin Suryaputri, Rahmat Nurcahyo, Industrial Engineering Department, Universitas Indonesia, Depok, Indonesia

ID 49       Climate Smart Farming – Deployment of Digital Twin Concepts in Agricultural Value Chain

Sundar Raja Vadlamani, President – Supply Chian, SeedWorks International Pvt. Ltd, Hyderabad, India

Chevala VVS Narayana, Data Scientist – Digital Transformation, SeedWorks International Pvt. Ltd, Hyderabad, India

Pulkit Mittal, Digital Business Leader, Tractor Manufacturing and Farming Equipment

ID 51       Implementation of Maintenance Management at Manufacturing Industry: A Survey of Maintenance Characteristics

Fahmi Ramadhan Putra, Annisa Khairani, Asrie Permata Dini, Desi Triyana, Rahmat Nurcahyo, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

ID 52       Certification of Tourism Business Standards and CHSE Standards in Indonesia

Ari Nugraheni, Rahmat Nurcahyo, and Djoko Sihono Gabriel, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Kampus UI, Depok, 16424, Indonesia  

ID 53       Using Data Envelopment Analysis to Measure the Efficiencies of Saskatchewan’s Health Regions during the COVID-19 Pandemic

Shashi Shahi, Continuing Lecturer, Faculty of Natural Resource Management, Lakehead University, Thunder Bay, Ontario, Canada

Eman Almehdawe, Associate Professor of Operations Research, Faculty of Business Administration, University of Regina, Regina, Saskatchewan, Canada

ID 54       Multi-Objective Optimization Model for an Integrated Disassembly Line Balancing and Green Vehicle Routing Problem

Nida Durmaz and Ayşenur Budak, Department of Industrial Engineering, Gebze Technical University, Kocaeli, Turkey

ID 55       A Cloud-Based Decision Support System for Optimal Tea Purchasing and Blending

Melis Teksan, Assistant Professor in Industrial Engineering, Faculty of Engineering, Özyeğin University, Istanbul, Turkey

Caner Taşkın, Full Professor of Industrial Engineering, Faculty of Engineering, Boğaziçi University, Istanbul, Turkey

Cavide Tekin, Delivery Manager, ICRON Technologies, Istanbul, Turkey

ID 56 Bibliometric Analysis of E-Waste Literature
Hana Fajria Pahlawan, Rahmat Nurcahyo, Farizal, & Nurhadi Wibowo
Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Salemba, Jakarta, Indonesia

ID 57       Learning in Service Ecosystems: Conceptualizing Network Learning in Servitization

Khuram Shahzad, Assistant Professor of Digital Innovation Management, School of Technology and Innovations, Industrial Management, University of Vaasa, Vaasa, Finland

ID 58       Exploring the Predictors of Employee Green Behaviour among Academics in Malaysia

Olawole Fawehinmi and Rohana Binti Ahmad, Faculty of Business, Economics and Social Development Universiti Malaysia Terengganu 21030 Kuala Terengganu Terengganu, Malaysia

Chukwuebuka Ibeabuchi and Amauche Ehido, Faculty of Business and Management, Universiti Sultan Zainal Abidin, Kampus Gong Badak, 21300 Kuala Terengganu, Terengganu, Malaysia.

Osaro Aigbogun Binary, University of Management and Entrepreneurship, Malaysia

Mohammed Sani Abdullahi, Department of Business Administration, Yusuf Maitama Sule University Kano, Nigeria.

ID 59       Broadcaster Conglomerate Businesses Diversification in Indonesia – A Recent View from Non-Traditional Revenue Streams

Yvana Sal Sabila, Rahmat Nurcahyo, Muhammad Dachyar, Department of Industrial Engineering, Universitas Indonesia

ID 60       Ideal Location Selection for Global Excavator Manufacturing Facilities in North America

Gerald Giovanni Raditya Gita, M. Dachyar, Novandra Rhezza Pratama, Industrial Engineering Department, Universitas Indonesia, Depok, Indonesia 

ID 61       Evaluation of Third-party Reverse Logistics Providers Using Fuzzy Axiomatic Design

Mehmet Ali Ilgin, Associate Professor of Industrial Engineering, Faculty of Engineering, Manisa Celal Bayar University, Manisa, Turkey

ID 63       Price-Setting Hotel Competition with Corporate Social Responsibility

Fernanda A. Ferreira and Flávio Ferreira, Polytechnic Institute of Porto, School of Hospitality and Tourism, Applied Management Research Unit (UNIAG), Rua D. Sancho I, 981, 4480-876 Vila do Conde, Portugal

Carlos Francisco Simões Gomes, Fluminense Federal University, Production Engineer (PPGEP), R. Passo da Pátria, 152-470 – São Domingos, Niterói – RJ, 24210-240, Brazil

ID 65       Improvement in Planning and Resource Management for an Automotive Company’s Parts Feeding System

Teresa Pereira, Institute of Mechanical Engineering, and Industrial Management (INEGI), Porto School of Engineering, Polytechnic of Porto Rua Dr. António Bernardino de Almeida, 431, 4200-072, Porto, Portugal

Mariana Xavier, Porto School of Engineering, ISEP/P.PORTO, Rua Dr. António Bernardino de Almeida, 431, 4200-072, Porto, Portugal

Fernanda A. Ferreira, School of Hospitality and Tourism of Polytechnic Institute of Porto, Applied Management Research Unit (UNIAG), Rua D. Sancho I, 981 4480-876, Vila do Conde, Portugal

Marisa Oliveira, Porto School of Engineering, ISEP/P.PORTO, Rua Dr. António Bernardino de Almeida, 431, 4200-072, Porto, Portugal

ID 67       Agricultural Mechanization in Indonesia and Comparison to Southeast Asia Countries

Adhyka Wijaya, Rahmat Nurcahyo, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Depok, West Java, Indonesia

ID 68       Analysis of The Effect of Workload on Work Stress Level in Indonesia Manufacturing Industry

Timotius Candra Kusuma, Department of Industrial Engineering, Universitas Indonesia, Depok 16424, Indonesia

Rahmat Nurcahyo, Professor in Industrial Engineering, Department of Industrial Engineering, Universitas Indonesia, Depok 16424, Indonesia

M Dachyar, Professor in Industrial Engineering, Department of Industrial Engineering, Universitas Indonesia, Depok 16424, Indonesia

ID 69      Policy, Supporting Infrastructure and Market of Electric Cars in Indonesia

Ajun Tri Setyoko, Rahmat Nurcahyo, Djoko Sihono Gabriel, Muhammad Habiburrahman, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok 16424, Indonesia

ID 70  Industry 4.0 Adoption in Manufacturing Industries in SME sector: Opportunities and Challenges

Rashmi Prava Das, Computer Science and Engineering, CV Raman Global University, Bhubaneswar, India
Kamalakanta Muduli, Mechanical Engineering, Papua New Guinea University of Technology
Sardar M.N. Islam, Professor  of Artificial Intelligence, Victoria University, Sydney, Australia

ID 72       Wind Energy as Renewable Energy in West Java, Indonesia

Fajar Prana, Master Student of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

Rahmat Nurcahyo, Professor of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

Farizal, Senior Lecturer of Industrial Engineering, Faculty of Engineering, Universitas Indonesia Depok, Indonesia

ID 73       A Survey of Maintenance Management Systems in Indonesia Primary School Institutions

Ajun Tri Setyoko, Ari Nugraheni, Mutiara, Rahmat Nurcahyo, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

ID 74       A Game Theory Analytics for Intelligent Technology Developments for Robust Supply Chain Management

Rofin T M, Assistant Professor, National Institute of Industrial Engineering, Mumbai, Maharashtra, India

Sarin Raju, Research Scholar, National Institute of Technology Karnataka, Surathkal, Karnataka, India

S Pavan Kumar, Associate Professor, National Institute of Technology Karnataka, Surathkal, Karnataka, India

Sardar M N Islam, Professor, Victoria University, Melbourne, Australia

ID 75       A Survey of Maintenance Management Systems in Indonesian Convenience Stores

Hanoum Salsabila, Wendy Febrianty Mardhiyah, Yola Lista Valentina, Mutia Perwita Sari, Master of Engineering Student in Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

Rahmat Nurcahyo, Professor in Management System, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

ID 76       Toward the integration of Lean Six Sigma and Industry 4.0: Current trends and future perspectives-Descriptive Bibliometric Analysis

Dounia Skalli, Abdelkabir Charkaoui, Laboratory of Engineering, Industrial Management and Innovation, Faculty of Sciences and Technology, Hassan 1st University, PO Box 577, Settat, Morocco

Anass Cherrafi, Laboratory of Mathematical Modeling, Simulation and Smart Systems (L2M3S), ENSAM Meknes, Moulay Ismail University

ID 77       The Survey of Status Preventive Maintenance Implementation in Government-owned Laboratory in Indonesia

Ayu Erliza, Aziati Ridha Khairi, Maraya Ghassani Santoso, Trisha Amanda, Rahmat Nurcahyo, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Kampus UI, Depok, 16424, Indonesia

ID 86      Application of Big Data for Students’ Behavior Prediction in Education Industry

Meltem Yontar Aksoy, PhD student in Industrial Engineering Program, İstanbul Technical University, Istanbul, Turkey

ID 87       Maintenance Application for Motorcycle: Case Study Ride Hailing in Indonesia City

Andy Kresna, Davis Belmiro, Diaddra Pramudito, and Naldo Badriansyah, Industrial Engineering Study Program, University of Indonesia, Jakarta, Indonesia

ID 88       Analysis and Exploratory Study of Preventive Maintenance Implementation: A Case Study from Coffee Shops in Bandung, West Java

Riri Fitriana, Maya Sukmawati, Muhammad Y Salam, Tsany N Hidayat, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Depok, West Java, Indonesia

ID 89       Survival Strategy of SMEs in Dealing with COVID-19 Pandemic: A Study from Indonesian SMEs

Tsany N. Hidayat, Rahmat Nurcahyo, Industrial Engineering Department, Universitas Indonesia Kampus UI Depok, Jakarta, Indonesia

ID 90       Analysis of Customer Satisfaction Level in Accredited Laboratory Testing ISO/IEC 17025 Before and After Pandemic Covid-19 Occurred: A Case Study

Muhammad Y Salam, Rahmat Nurcahyo, Djoko S Gabriel, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Depok, West Java, Indonesia

ID 91       Preventive Maintenance Practices Survey in Hospital Laboratories in Jakarta Indonesia

Clara Puspita N, Gandi Henra Laksana B, M. Fauzan, Lutfiani, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, Indonesia

ID 92       Materiality of Supplier Sustainability Assessment for Buyer Companies

Öznur Özdemir-Akyıldırım, Associate Professor of Operations Management, Faculty of Economics and Administrative Sciences, Akdeniz University, Antalya, Turkey

ID 93       Customized Vacuum Valve Developed by Multi-material 3D-Printed Processes for Carbon Fiber Lamination 

Patrich Ferretti, Gian Maria Santi, Christian Leon-Cardenas, Giulia Alessandri, Merve Sali, and Marco Freddi, Department of Industrial Engineering Alma Mater Studiorum University of Bologna Viale Risorgimento, 2 – 40136, Bologna, Italy

ID 94       Assessment of MSMEs’ Preventive Maintenance: A Case Study of Coffee Shops at DKI Jakarta

Andi Maulana, Alif Faridalthaf, Yvana Sal Sabila, and Zulfaa Irbah Zain, Department of Industrial Engineering, Universitas Indonesia, Kampus Baru UI Depok, Depok 16424, Indonesia

ID 95       Survey of Maintenance Management Implementation: A Case Study of Office Buildings in Indonesia

Fajar Prana, Kartika Trisna Putri, Rizki Abdillah, Azam Ibrahim Gufran, Student of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

ID 96   A Mathematical Model of Local Drug Store Selection for Psychiatric Disorders in Thailand
Napatsawan Dedkhard and Warisa Wisittipanich
Master of Engineering Program in Logistics Engineering and Supply Chain Management, Graduate School, Chiang Mai University, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand

ID 97       Artificial Intelligence Demand Forecasting Techniques in Supply Chain Management: A Systematic Literature Review

Saad El Marjani, Safae Er-rbib and Loubna Benabbou, Department of management sciences, Université du Québec à, Rimouski, Levis, QC, Canada

ID 98       Evaluation of Pharmacy Warehouse Location Selection Factors under Pandemic Conditions

Melike Erdogan, Doctor of Industrial Engineering, Faculty of Engineering, Duzce University, Duzce, Turkey

Ertugrul Ayyildiz, Doctor of Industrial Engineering, Faculty of Engineering, Karadeniz Technical University, Trabzon, Turkey

ID 99       The Impact of Supply Chain Disclosure on Supplier Sustainability: A Qualitative Analysis in the Textile Industry

Melek Akın Ateş, Assistant Professor of Purchasing & Supply Management, Sabanci Business School, Sabanci University, Istanbul, Turkey

ID 100      Sustainability in the Textile Industry: A Quantitative Analysis of the Role of Supply Chain Disclosure and Supply Chain Complexity

Melek Akın Ateş, Assistant Professor of Purchasing & Supply Management, Sabanci Business School, Sabanci University, Istanbul, Turkey

ID 101      Improving Firm Performance Through Knowledge Management And Open Innovation

Dicky Hida Syahchari, Maria Grace Herlina, Management Department, Binus Business School, Bina Nusantara University, Jakarta, Indonesia

ID 102      An Outlook to Childhood Obesity in Saudi Arabia using VOSviewer

Tayeb Brahimi, Associate Professor at the College of Engineering, Energy and Technology Research Centre, Natural Science, Natural Science, Mathematics and Technology Unit, Effat University, Jeddah, Saudi Arabia

Hala Haneya, Hanin Balbaid and Hafsa Ranjha, Student at the Computer Science Department, College of Engineering, Effat University, Jeddah, Saudi Arabia

Kholoud Khateeb, Assistant Professor at the Computer Science Department, College of Engineering, Effat University, Jeddah, Saudi Arabia

ID 103    Implementation of Preventive Maintenance Management in Mosque Buildings : Indonesia

Lutfie Hidayatullah, Adhyka Wijaya, Arya Ibrahim Aji, Michael Alfonsus L. Suryo S., Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia Depok, West Java, Indonesia

ID 104 Production, Maintenance and Quality Management for a two-product, Multi-warehouse Problem, with Multi-Level Statistical Process Chart of a Supply Chain under Service and Quality requirements.
Aminu Sahabi Abubakar, Hajej Zied, Aime C. Nyoungue, University of Lorraine, LGIPM, F-57000 Metz, France

ID 105      Preventive Maintenance of Diesel Power Generators in Indonesia’s Manufacturing Industries

Bagas Muhammad Kartiko, Timotius Candra Kusuma, Yosi Carolina Silaen, and Wirawan Pratama Suwardi, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, 16424, Indonesia

Rahmat Nurcahyo, Professor in Industrial Engineering, Department of Industrial Engineering, Universitas Indonesia, Depok 16424, Indonesia

ID 106      Pharma 4.0 Quality Management Challenge: A Literature Review

Pitoyo Amrih and Retno Wulan Damayanti, Industrial Engineering, Sebelas Maret University, Surakarta, Indonesia

ID 108      Advanced Design Method of 3D-Printed Cutting Guides Development for Orthopedic Surgery 

Giulia Alessandri, Gianmaria Santi, Christian Leon-Cardenas, and Patrich Ferretti, Alma Mater Studiorum University of Bologna, Department of Industrial Engineering, Bologna, 40136, Italyy

ID 110      Determining the Type of Maintenance by Using Multi-Attribute Utility Theory Case Study: Small and Medium Enterprises Printing in Jabodetabek

Yoga Fajar, Latief Anggar Kurniawan, Sita Nurlailly, Taufik Rizkiandi, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Jakarta, Indonesia

ID 111      Improving Firm Performance Through Open Innovation and Change Management

Dicky Hida Syahchari, Maria Grace Herlina, Management Department, Binus Business School, Bina Nusantara University, Jakarta, Indonesia 11480

ID 112      Survey of Maintenance Implementation on Laundry Business in Indonesia, Jakarta Region

Indah Purnamaningtyas, Fery Permadi H, Hana Fajria P., and Sandi Bakti, Department of Industrial Engineering, Universitas Indonesia, Kampus Baru UI Depok, Depok 16424, Indonesia

ID 113 Comparative Analysis of Wind Power Production Planning Based on Artificial Neural Network and Theoretical Approach
Aisha Sa’ad, Aime Nyoungue, Zied Hajej, Laboratoire de Genie Informatique, de Production et de Maintenance, Université de Lorraine, Metz, France

ID 115      Proposed Framework of Product Redesign Need Assessment based on Customer Requirement, Complaint and Failure Analysis

Anda Iviana Juniani,  Department of Industrial and Systems Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
Department of Design and Manufacture Engineering, Shipbuilding Institute of Polytechnic Surabaya, Surabaya, Indonesia

Moses Laksono Singgih, and Putu Dana Karningsih, Department of Industrial and Systems Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

ID 116      Industrial Layouts Design for a SME in the Electronics Industry

Marlene Brás, Department of Economics, Management, Industrial Engineering and Tourism, University of Aveiro, Aveiro, Portugal

Ana Moura, Department of Economics, Management, Industrial Engineering and Tourism, GOVCOPP – Systems for Decision Support Research Group, University of Aveiro, Aveiro, Portugal

ID 117    Accountability for Operational Costs Using the Business Process Management at Indonesian Oil and Gas Company

Rizki Abdillah, M. Dachyar, Novandra Rhezza Pratama, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

ID 118      Design of Organization Strategy and Business Process Improvement using Business Model Canvas for Non-Profit Organization in Indonesia

Mutiara, M. Dachyar, Rahmat Nurcahyo, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

ID 119      Optimization Proposal for Supply Management Implementing Supply Chain Management and Lean Warehousing in an Alcoholic Beverage Marketing Company of the Retail Sector

Claudia-Alejandra Cavero-Quispe, Mayra-Elizabeth Flores-Luque and Manuel-Fernando Montoya-Ramírez, Faculty of Engineering and Architecture, University of Lima, Lima, Perú

ID 120    The Tps is the Key to the Refreshment of the Craft Sector in Morocco

Nejjari Nada, Chafi Anas and Kammouri Alami Salaheddine, Department of Industrial Engineering, University Sidi Mohammed Ben Abdellah, Faculty of sciences and Technology, Fès

ID 122      Robotic Cell Design Through Operation Assignment Integrated with Sequencing of Robot Moves

Hakan Gultekin, Mechanical and Industrial Engineering Department, Sultan Qaboos University, Muscat, Oman

ID 124 The Effects of Autocratic, Democratic, and Laissez-Faire Leadership Styles on Organizational Performance
Ziad Ghazal, Manar Hammoud, Mohamad Ali Mezher, MBA Graduate from the Lebanese American University, Adnan Kassar School of Business, Lebanese American University, Beirut, Lebanon

ID 125    A Comparative Study: Application of Strategic Operations Management Decisions in Automotive Industry Pioneers

Siti Sayidatul Durrah Khazalle, Habibah@Norehan Haron, Abd Rahman Abdul Rahim, Razak Faculty of Technology and Informatics, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia

ID 126      Air Quality in Office Buildings

Salma Dwidar, Associate Professor of Architecture Department, Faculty of Architecture and Design, Riyadh, KSA 

Hala Sirror, Amani Derbali, Amal Abdelsattar, Assistant Professor of Architecture, Department Faculty of Architecture and Design, Riyadh, KSA 

Donia AbdelGawad, Assistant Professor of Architecture Department, Faculty of Fine Art, Alexandria University 

Alaa Aldin AlAlfy, Professor, Architecture Department, Faculty of Fine Art, Alexandria University

ID 127      Industry 4.0 as enablers in Lean Six Sigma Initiatives

Adnan Hassan, Department of Materials, Manufacturing & Industrial Engineering, School of Mechanical Engineering, Universiti Teknologi Malaysia, Skudai, Johor 81310, Malaysia

ID 129 Automatic Identification System Data Quality: Outliers Detection Case
Sara El Mekkaoui and Abdelaziz Berrado, Equipe AMIPS, Ecole Mohammadia d’Ingénieurs, Mohammed V University in Rabat, Morocco
Loubna Benabbou, Département Sciences de la Gestion, Université du Québec à Rimouski, Lévis, Qc, Canada

ID 130 Imperfect Preventive Maintenance Planning Optimization for Leased Machines
Zied Hajej, Mohamed Ali Kammoun and Nidhal Rezg, Laboratoire de Génie Informatique, de Production et de Maintenance, (LGIPM), Metz, France

ID 131      The Current Association between Machine learning Techniques and Digital Smart Supply Chain 4.0 in Managing Transportation Distribution Risk

Hmamed Hala, LM2I Laboratory, ENSAM, , Moulay Ismail University, 50500 Meknes, Morocco

Cherrafi Anass and Benghabrit Youssef ENSAM, Moulay Ismail University, 50500 Meknes, Morocco

ID 132      Proposal for the Implementation of Methods Engineering through the Balancing of the Assembly Line in the Production Process of a Textile Apparel Industry for Women’s Denim Garments.

Liz Madeleine López Zavaleta, Brigitte Antuane Medina Ayala and Manuel-Fernando Montoya-Ramirez, University of Lima, Faculty of Engineering and Architecture, Peru

ID 133    Techno-Economic Evaluation of Solar Rooftop Photovoltaic Systems at Factory Building in Indonesia

Fery Permadi H, M. Dachyar, Farizal, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

ID 134      Analysis of Preventive Maintenance in Small and Medium Enterprises: Case Study of Coffee Shops in Depok City

Ayu Mandasari Nasution, Yafiazmi Dhaniswara, and Wildan Firdaus, Industrial Engineering Department, Universitas Indonesia. Depok, Indonesia

ID 135      Evaluation of The Effectiveness of Plasma Gel for Disinfection

Soithong Lungparn, Advanced Manufacturing and Management Technology Research Center, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, Thailand

Wassanai Wattanutchariya, Advanced Manufacturing and Management Technology Research Center, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, Thailand

ID 136      Eye-tracking in the study of attentional bias in posttraumatic stress disorder: A systematic literature review

Andrea Barrera, Grupo de Neurociencias, Universidad del Azuay, Cuenca, Ecuador

Patricia Ortega, Grupo de Neurociencias and Escuela de Ciencias de la Computación, Universidad del Azuay, Cuenca, Ecuador

Omar Alvarado, Grupo de Neurociencias and Escuela de Ingeniería Electrónica, Universidad del Azuay, Cuenca, Ecuador.

Martha Cobos, Grupo de Neurociencias, Universidad del Azuay, Cuenca, Ecuador

ID 137    Framework Design of the Supplier Selection for Organization using Business Process Reengineering (BPR) Method at Telecommunication Industry in Indonesia

Asrie Permata Dini, M. Dachyar, Novandra Rhezza Pratama, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

ID 138      The Implementation of Anti-Bribery Management System Designed to Mitigate the Bribery Risk in State-Owned Enterprises: A Case Study of The Indonesia Farming Industry

Kartika Trisna Putri, M. Dachyar, and Novandra Rhezza Pratama, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

ID 139      Game Over: An Application of Customer Churn Prediction using Survival Analysis Modelling in Automobile Insurance

Joshua James A. Bravante, School of Information Technology, Mapua University, Intramuros, Manila City, Philippines

Rex Aurelius C. Robielos, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 140      Establishing Recruitment Strategy for a Small and Medium Enterprise Engaged in Wedding Organizers

Rosyidah Rahmah and Dian Kurnianingrum, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480

ID 141      To Understand Consumer Motivation for Luxury Consumption in Different Context:  A Systematic Literature Review

LI Yingyu and NAGASAWA Shin’ya, Graduate School of Commerce, Waseda University, Tokyo, 1698050 Japan

ID 142      Pricing and Inventory Planning for Perishable Products with Price, Stock, and Promotional Effort Sensitive Demand

Winda Narulidea, Department of Industrial and Systems Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
Department of Logistics Engineering, Universitas Internasional Semen Indonesia, Gresik, Indonesia

Ahmad Rusdiansyah, Sri Gunani, Department of Industrial and Systems Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

ID 143      Demand and Supply Planning for Covid-19 Vaccine in Turkey With an Anti-Vaccine Survey

İrina Pınar Tuğrul, Graduate Student in Industrial Engineering, Faculty of Engineering, Özyeğin University, Istanbul, Turkey

Zehra Melis Teksan, Assistant Professor in Industrial Engineering, Faculty of Engineering, Özyeğin University, Istanbul, Turkey

ID 144      Supply Chain Improvement Strategy with Extended Warranty on Retailers

Debrina Puspita Andriani, Graduate Student of Industrial Management, School of Management, National Central University, Taoyuan, Taiwan

Fu-Shiang Tseng, Assistant Professor in Industrial Management, School of Management, National Central University, Taoyuan, Taiwan

ID 147      Determination of the Best Communication Technology for Smart Grids with Fuzzy Logic Approach

Huseyin Bıyıkcı, Industrial Engineering PhD Programme, Institute of Pure and Applied Sciences, Marmara University, Istanbul, Turkey

ID 148      Evaluation of Student Outcomes in Remote Learning using Structural Equation Modelling: The Philippines Settings during COVID-19 Pandemic

Gabriel C. Bucu, Department of Industrial and Systems Engineering, De La Salle University, Taft Avenue, Manila, 1002, Philippines Department of Industrial Engineering, University of Santo Tomas, España Boulevard, Sampaloc, Manila, 1008, Philippines

Richard S. Li, Department of Industrial and Systems Engineering, De La Salle University, Taft Avenue, Manila, 1002, Philippines

Anthony S.F. Chiu, Department of Industrial and Systems Engineering, De La Salle University, Taft Avenue, Manila, 1002, Philippines

ID 149      Prioritization of Circular Economy Barriers Using Best Worst Method

Khadija Echefaj and Abdelkabir Charkaoui, Faculty of sciences and Techniques, Hassan First University of Settat, Settat, Morocco

Anass Cherrafi, ENSAM- Meknes, Moulay Ismail University, Meknes, Morocco

ID 150      Entrepreneurship and Social Contribution Through Fountain Pens and the Act of “Writing” by Montblanc

Shin’ya NAGASAWA, Professor, Graduate School of Business and Finance, Waseda University, Tokyo, Japan

ID 151    Optimization of Supply Chain Strategies to Meet Delivery Goals with ANP, SWOT, and TOPSIS Approaches: A Case Study of the Sugar Refinery Industry

Ayu Mandasari Nasution, M. Dachyar, Novandra Rhezza Pratama, Industrial Engineering Department1, Universitas Indonesia, Depok, Indonesia

ID 153      Managing Customers’ Loyalty in Fashion Branded: Experience from Indonesia

Sidik Budiono and John Tampil Purba, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesi

ID 155    A Problem Space Search Heuristics for The Integrated Fleet Sizing and Replenishment Planning Problem

Duygu Aghazadeh and Kadir Ertogral, Industrial Engineering Department, TOBB University of Economics and Technology, Sogutozu cad. No:43 Ankara, Turkey

ID 157      Integrated Information System Design of Municipal Solid Waste Data in Indonesia (Study Case: South Tangerang City)

Kirana Sekarlili and M. Dachyar, Industrial Engineering Department, Universitas Indonesia, Depok, Indonesia

ID 158    Impact of Brand Image, Price, Customer Oriented Services On Customer Buying Decision With Brand Trust as Mediation Variables in Prudential Insurance Co.

A Soegihono, Sidik Budiono and John Tampil Purba, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

ID 159      Strategies for Designing Intellectual Property-based Financing Business Model within The Creative Economy Sector: An Indonesian Context

Maraya Ghassani Santoso, Industrial Engineering Department, Universitas Indonesia, Depok, Indonesia

M. Dachyar and Rahmat Nurcahyo, Professor in Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

ID 160      Investigating the predictors of Employee Work Engagement during COVID-19 Pandemic

Adedapo Oluwaseyi Ojo, Senior Lecturer, Faculty of Management, Multimedia University, Cyberjaya 63100, Malaysia

Olawole Fawehinmi, and Juhari Noor Faezah, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Terengganu, Terengganu, Malaysia

Chukwuebuka Ibeabuchi, and Amauche Ehido, Faculty of Business and Management, Universiti Sultan Zainal Abidin, Kampus Gong Badak, 21300 Kuala Terengganu, Terengganu, Malaysia.

ID 161    Evaluating the Role of Retail Stores in Omni-Channel Retailing

Mazdak Hooshyar Azar, Graduate Education Institute, Istanbul Sabahattin Zaim University, Turkey

Canser Bilir, Industrial Engineering Department, Istanbul Sabahattin Zaim University, Turkey

ID 162      Strategy Formulation of Health Clinic Service Improvement in COVID-19 Condition Using Fuzzy AHP and QFD Method

Jihan Rihadatul Aisy Siregar and M. Dachyar, Industrial Engineering Department, Universitas Indonesia, Depok, Indonesia

ID 164      Unpacked Selling: A Zero-waste Alternative to Single-Use Packaging but is It Profitable?

Öznur Özdemir-Akyıldırım, Associate Professor of Operations Management, Faculty of Economics and Administrative Sciences, Akdeniz University, Antalya, Turkey

Gökçe Esenduran, Assistant Professor of Operations Management, Department of Management, Purdue University, West Lafayette, IN 47907-2056, USA

ID 165      The use of Gravitational Law to assess urban balance: the case of Makkah region in Saudi Arabia      

Dr. Amani Derbali, Dr. Salma Dwidar, Dr. Amal Abdelsattar, Dr. Hala Sirror, Assistant Professors, College of Architecture & Design, Prince Sultan University, Riyad, KSA

Prof. Abdallah Farhi, Full Professor, Dean, Architecture Department, University of Mohamed Khedhir Biskra, Algeria

Donia AbdelGawad, Assistant Professor of Architecture Department, Faculty of Fine Art, Alexandria University

ID 168      Internet of Things Technology Selection for Monitoring Process at Palm Oil Mills

Namira Hasna Latifah and M. Dachyar, Industrial Engineering Department, Universitas Indonesia, Depok, Indonesia

ID 186      Packaged Juice Warehouse Operations Improvement using Business Process Reengineering Approach

Amalia Fitri Muharommah and M. Dachyar, Industrial Engineering Department, Universitas Indonesia, Depok, Indonesia

ID 187    Prediction of Migration Paths Using Agent-Based Simulation Modeling: The Case of Syria

Ozlem Gungor, Graduate Student of Industrial Engineering, Graduate School of Sciences & Engineering, Koc University, Istanbul, Turkey

Dilek Gunnec, Assistant Professor in Industrial Engineering, Faculty of Engineering, Ozyegin University, İstanbul, Turkey

F. Sibel Salman, Professor in Industrial Engineering, College of Engineering, Koc University, Istanbul, Turkey

Eda Yucel, Assistant Professor in Industrial Engineering, Faculty of Engineering, TOBB University of Economics and Technology, Ankara, Turkey

ID 188      Business Improvement Strategy for Local ERP Provider Company in Indonesia with SWOT-Fuzzy AHP-TOPSIS Method

Kania Raihan Nabila and M. Dachyar, Department of Industrial Engineering, University of Indonesia, Depok 16424, Indonesia

ID 189      Implementation of Mosque Maintenance Management in Jakarta Region: Result of Pilot Survey

Hafidz Akbar Halim and Muhammad Habiburrahman, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia Depok, Indonesia

ID 190      Enhancing Efficiency of Plasma-Activated Water Using Microbubbles/Nanobubbles Techniques

Kochakon Moonsub, Advanced Manufacturing and Management Technology Research Center, Ph.D.’s Degree Program in Industrial Engineering, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, Thailand

Dheerawan Boonyawan, Plasma and Beam Physics Research Facility, Department of Physics and Materials Science, Faculty of Science, Chiang, Mai University, Chiang Mai, Thailand

Vishnu Tonglek, Department of Electrical Engineering, Faculty of Engineering, Rajamangala University of Technology Lanna, Chiang Mai, Thailand

Wassanai Wattanutchariya, Advanced Manufacturing and Management Technology Research Center, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, Thailand

ID 191      Design of Internet of Things Alternatives Selection for Pallet Management in a Cement Company

Eugenia Griseldis and M. Dachyar, Industrial Engineering Department, University of Indonesia, Depok, Indonesia

ID 193      An Integrated Intuitionistic Fuzzy MCDM Approach to Rank Alternatives of Polycarbonate Thermoplastic Resins

Ilknur Karacan, Ismet Karacan, and Inanc Erdogan, AN-EL Anahtar ve Elektrikli Ev Aletleri San. A.S., Pendik, 34896, Turkey

Ozlem Senvar, Serol Bulkan, Department of Industrial Engineering, Marmara University, Maltepe, 34854, Turkey

ID 194      COVID-19 Vaccine Logistics Process Improvement Using Business Process Reengineering

Dyah Ayu Azzahrah Fikri and M. Dachyar, Industrial Engineering Department, University of Indonesia, Depok, Indonesia

ID 195      Customer Loyalty Strategy Using Customer Lifetime Value (A Case Study of Jamu and Herbal Products SME)

Duhita Wahyu Maulida and M. Dachyar, Industrial Engineering Department, Universitas Indonesia, Depok, Indonesia

ID 196      Development of an integrated preparation method for the implementation of ISO 9001, ISO 14001 and ISO 45001: A Case Study from Indonesia Automotive Industry

Wirawan Pratama Suwardi, Rahmat Nurcahyo, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, 16424, Indonesia

ID 199      Enhancing Unplanned Maintenance Priorities Using Artificial Neural Networks: Case Study from Oman Oil & Gas Industry

Khalid Alfahdi, Hakan Gultekin and Emad Summad, Industrial & Mechanical Engineering, Sultan Qaboos University, Al Seeb, Al Khoudh 123, Muscat, Sultanate of Oman

ID 200      Improvement of Automotive After-Sales Service Using Business Process Reengineering

Hanni Attarfi and M. Dachyar, Industrial Engineering Department, Universitas Indonesia, Depok, Indonesia

ID 204      Towards Electric Vehicle Era in A Developing Country: Review of Research on Automotive Component Industry in Indonesia from Industrial Engineering Perspective

Muhammad Habiburrahman and Rahmat Nurcahyo, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

ID 205      Holistic Hospital Operations Management with Industry 4.0 Technologies

Darshan Pandya, Research Scholar, Operations Management, Indian Institute of Management Raipur, Raipur, India

Gopal Kumar, Asst. Professor, Operations Management, Indian Institute of Management Raipur, Raipur, India

ID 206      Effect of Preventive Maintenance on Coffee Shop Operations and Performance

Laras Safitri and Muhammad Habiburrahman, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

ID 207      Interactive CONstraint-based Configuration: Hybridization of Filtering and Compilation Approaches

Idir BOUMBAR, Élise Vareilles, ISAE SUPAERO, Toulouse, France

Hélène Fargier, Senior researcher for CNRS in Artificial Intelligence, IRIT, Toulouse, France

Paul Gaborit, Xavier Lorca, IMT Mines Albi, Albi, France

ID 209      Artificial Intelligence: Insights into Industrial Purchasing
Laila El Shafie, Student of Software Engineering and Management, Institute of Business Economics and Industrial Sociology, Graz University of Technology Graz, Austria

Volker Koch Post – Doc, Institute of Business Economics and Industrial Sociology, Faculty of Mechanical Engineering, Graz University of Technology Graz, Austria

ID 211    Smart Gas Grid Concepts at Greener Energy Era

Huseyin Biyikci, Industrial Engineering PhD Programme, Institute of Pure and Applied Sciences, Marmara University, Istanbul, Turkey

Hulya Vural, Department of Computer Engineering, Antalya Bilim University, Antalya, Turkey

Sonay Davutoglu, Fatma Nur Meltem Masmas, Berkay Koç, R&D Department, IGDAS, Istanbul, Turkey

ID 212      Mobile Vaccination Clinic Routing Problem

Ecem Yucesoy, Elvin Coban, Burcu Balcik, Department of Industrial Engineering, Ozyegin University, Istanbul, Turkey

ID 215      Pricing Decisions in Revenue Management: An Experimental Investigation

Ümmühan Akbay, Department of Industrial Engineering, Özyeğin Üniversity, Istanbul 34974, Turkey
Department of Operations Management and Information Systems, Sabancı University, Istanbul 34956, Turkey.

Nur Ayvaz Çavdaroğlu, Business Administration Department, Kadir Has University, İstanbul 34083, Turkey.

ID 218      Asset Management Models Brief Review and Framework Development for Energy Sustainability & Sustainable Development

Joseph Akpan and Oludolapo Akanni Olanrewaju, Department of Industrial Engineering, Durban University of Technology, Durban, SA

ID 219      Acceptance Expectancy for Cognitive Assistance Systems Variants in Smart Factories

Bastian Pokorni and Christian Saba, Department of Connected Manufacturing Systems, Fraunhofer Institute for Industrial Engineering IAO, University of Stuttgart, Institute of Human Factors and Technology Management (IAT), Stuttgart, Germany

ID 221      Comparative Statistical Analysis of Supplier Performance for a Retailer

Esra Agca Aktunc, Assistant Professor of Industrial Engineering, Faculty of Engineering and Natural Sciences, Kadir Has University, Istanbul, Turkey

ID 223      “The Influence of Various E-Learning Techniques Upon Technology Acceptance and Student Engagement in Differing Classroom Environments”

Tasfia Bari M.S., Doctoral Student, Eastern Michigan University, College of Technology, Ypsilanti, Michigan

Munther Abualkibash, Eastern Michigan University, College of Technology, School of Information Security and Applied Computing, Ypsilanti, Michigan

ID 224     PRODUCTION PLANNING PERSPECTIVE FOR HYBRID MANUFACTURING–REMANUFACTURING SYSTEMS

Yusuf Tansel Ic, Esra Dinler and Kumru Didem Atalay, Department of Industrial Engineering, Faculty of Engineering, Baskent University, Ankara, Turkey

ID 225 Utilising IoT to attain resilience across supply chains
Moayad Al-Talib, Anthony I. Anosike, Jose Arturo Garza-Reyes and Simon Peter Nadeem, Centre for Supply Chain Improvement, University of Derby, Derby, UK, DE22 1GB
Wasen Y. Melhem, Computer of Information Systems, Yarmouk University, Irbid, Jordan 21163

ID 228      A Best-Response Algorithm with Voluntary Communication and Mobility Protocols for Mobile Autonomous Teams Solving the Target Assignment Problem

Sarper Aydın and Ceyhun Eksin, Industrial and Systems Engineering, Texas A&M University, College Station, TX 77843, USA

ID 229      Barriers and Drivers Of Biomass Renewable Energy As Co-Firing In Industrial Supply Chain With Bibliometric Analysis

Sawarni Hasibuan, Choesnul Jaqin, Ika Yunita, Bayu Nugroho, Master of Industrial Engineering Program, Universitas Mercu Buana, Jakarta, Indonesia,

Hermawan, Computer Science Department, Universitas Pakuan, Bogor, Indonesia

ID 230      Remanufacturing: Case study in Mercedes-Benz Bus Factory

Adnan Corum, Department of Industrial Engineering, Bahcesehir University, Istanbul, Turkey

ID 231    Synergistic Urban-Transport prediction model Using Support Vector Machine; in Support of Sustainable Development Goals Achievement: A Case of State of Qatar

Aya Hasan AlKhereibi, Qatar Transportation and Traffic Safety Center, College of Engineering, Qatar University Doha, Qatar

Murat Kucukvar, Department of Mechanical and Industrial Engineering, College of Engineering, Qatar University Doha, Qatar

Nuri Onat, Qatar Transportation and Traffic Safety Center, College of Engineering, Qatar University Doha, Qatar

Jaser Mohammad Saleh Mustafa, Department of Mechanical and Industrial Engineering, College of Engineering, Qatar University Doha, Qatar

ID 232      Outer Permanent Magnet Motor for Small EV

Minh Dinh Bui, and  Nguyen Quang Dich, Hanoi University of Science and Technology

Nguyen Viet Anh, Hanoi University of Industry

ID 233      Electromagnetic Design of PMa-SynRM Double V and Inverter Delta

Bui Minh Dinh, Hanoi University of Science and Technology,

Nguyen Viet Anh, Hanoi University of Science and Technology

ID 234      Dynamic Modeling of Line Start Permanent Magnet Assistance Synchronous Reluctance by Different Rotor Designs for Industrial and Traction Applications.

Bui Minh Dinh, Dang Quoc Vuong, Hanoi University of Science and Technology (HUST),

Ho Manh Tien, Faculty of Electrical-Electronic Engineering, University of Transport and Communications (UTC)

ID 235      Detail Design of Interior Permanent Magnet Motor for Electric Vehicle

Bui Minh Dinh, Hanoi University of Science and Technology, Vietnam

Nguyen Viet Anh, Hanoi University of Industry, Vietnam

ID 236      Active Heat Sinks Design and Optimization of RRU 5G Considering Wind Speed Condition

Minh Dinh Bui, Viettel High Technology Industries Corporation, Hanoi, Vietnam.

Duc-Thinh Nguyen, Quoc Hung Nguyen and Van Manh Khong, Department of Mechanical Engineering, Viettel High Technology Industries Corporation, Hanoi, Vietnam

ID 237      Estimating Remaining Useful Life Under Multiple Operational Conditions Using Ensemble Learning

Firas Alrumaykhani and Mohammad Nabhan, Industrial and Systems Engineering Department, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia

ID 238      Optimization of Tri–Rotor Propeller for Maximum Lift Efficiency

Merve Sali, Department of Industrial Engineering, Alma Mater Studiorum University of Bologna, Viale Risorgimento, 2 – 40136, Bologna, Italy

ID 240      Duck Egg Quality Classification Based on its Shell Visual Property Through Transfer Learning Using ResNet-50

JV Bryan DP. Caguioa, Ryhle Nodnylson E. Guinto, Lee Reuben T. Mesias and Joel C. De Goma, School of Information Technology, Mapua University, Makati, Metro Manila

ID 258      Stressor Classification of Filipino Political Tweets Using LDA, SVM, XGBoost, Logistic Regression

Mark Gabriel E. Edaño, Ryan Joseph S. Gonzales, Raphael Carlo B. Laguda and Joel C. De Goma, School of Information Technology, Mapua University – Makati, Makati City, Philippines

ID 263 A Survey to Understand Students’ Preference between Synchronous and Face-To-Face Instructional Methods in an Undergraduate Engineering Class in the United States and an Overseas Campus
Albertus Retnanto, Professor, Petroleum Engineering, Texas A&M University at Qatar, Doha, Qatar
Hamid R. Parsaei, Professor, Department of Industrial and Systems Engineering, Texas A&M University, College Station, TX, USA
Boback Parsaei, Integrated Technology Systems, Inc., Houston, Texas, USA

ID 265      Horace: A Digital Classroom Management Software for Computer Laboratories

Zehrei Verj Morales, Patricia Marie Baluyut, Rainier Timbol and Dr. Lilibeth T. Cuison, Information Technology, College of Computer Science Angeles University Foundation, MacArthur Hwy, Angeles, 2009 Pampanga

ID 268      A Framework to Develop and Evaluate Circular Economy, Readiness within the Rail Sector

Carl Waring and Kapila Liyanage, College of Science and Engineering, University of Derby, Derby, DE22 3AW, UK

ID 269      Comparing ALNS and NSGA-II on Bi-Objective Travelling Thief Problem

Kazım Erdoğdu, Department of Software Engineering, Faculty of Engineering, Yaşar University, İzmir, Turkey

ID 270      Ecosystem Determinants of Height and Weight Among Poverty Ridden Children in India

Bita Afsharinia, Senior Research Scholar, Department of Management Studies, Indian Institute of Science, Bangalore, India

Anjula Gurtoo, Professor, Department of Management Studies, Chairperson, Centre for Society and Policy, Indian Institute of Science, Bangalore, India

ID 272 Design in the Sustainable Supply Chain in Agribusiness: A Case Study in a Citrus Business Company
Lila Margarita Bada-Carbajal, Senior Lecturer of Management, Instituto Tecnológico Superior de Álamo Temapache, Tecnólogico Nacional de México, Veracruz, Mexico

Luis Rocha-Lona, Senior Lecturer of Operations Management
Escuela Superior de Comercio y Administración, Unidad Santo Tomás,
Instituto Politécnico Nacional, Mexico City, Mexico

ID 274      The Framework of Plantation Leadership: An Insight from Indonesia

Sudardi Waribi, PhD Student in Management Science, Postgraduate Program, Universitas Negeri Jakarta, Jakarta, Indonesia

Elkana Timotius, Assistant Professor of Industrial Engineering, Faculty of Engineering and Computer Sciences, Universitas Kristen Krida Wacana Jakarta, Indonesia

ID 285      Risk Management: A Parallel Between ISO 31000 and the PMBOK Guide (2017)

Danieli Braun Vargas and Lucila Maria de Souza Campos, Department of Production Engineering, Federal University of Santa Catarina

ID 287      Dexteropreneurship: A Study of Ambidexterity Entrepreneurship, Conceptualization and Research Agenda

Hendry Hartono, Management Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480

Sasmoko, Primary Teacher Education Department, Faculty of Humanities, Bina Nusantara University, Jakarta, Indonesia 11480

Yasinta Indriati, Entrepreneurship Department, Universitas Agung Podomoro, Jakarta, Indonesia 11470

ID 288      Design of an online transporter for a pharmaceutical store: A B2C E-commerce platform

Mark Jason Llorente, Juan Carlo Miguel Recuenco and Sela Frances Nicolas, School of Information Technology, Mapua Univ. Makati, Philippines

Dr. Eric Blancaflor, Professor in School of Information Technology
Mapua University, Makati, Philippines

 ID 289      A Review of Subscription-Based Service Features Set as Security Controls

Gabriel Edrick Acuña, Luis Antonio Alvarez, John Ramil Funilas, Luis Rafael Laurena, Joshua Millard Odicta , Ronald Bernardo, School of Information Technology, Mapua University
Dr. Eric Blancaflor, Professor of School of Information Technology, Mapua University, Makati, Philippines

ID 291      Achieving Supply Chain Resilience Through Risk Management and Mitigation Discipline

Harssh Keswani, MSc, Logistics and Supply Chain Management, Cranfield School of Management, UK

Ilias Vlachos, Full Professor in Supply Chain Management, Excelia Group, Excelia Business School, La Rochelle, France

ID 292      Exploring Supply Chain Blockchain Potential in the Pharmaceutical Industry

Georgios Gogos, MBA Programme, School of Social Sciences, Hellenic Open University, Parodos Aristotelous 18, GR-26335, Patras, Greece

Ilias Vlachos, Professor in Supply Chain Management, Excelia Group, Excelia Business School, La Rochelle, France

Giannis T. Tsoulfas, Assistant Professor in Supply Chain Management – Logistics, Department of Agribusiness and Supply Chain Management, Agricultural University of Athens, Thiva, Greece

ID 293      Coffee Supply Chain Performance Improvement: A Case Study of Digital Transformation

Apostolos Zisimopoulos, MBA Programme, School of Social Sciences, Hellenic Open University, Parodos Aristotelous 18, GR-26335, Patras, Greece

Ilias Vlachos, Professor in Supply Chain Management, Excelia Group, Excelia Business School, La Rochelle, France

Giannis T. Tsoulfas, Assistant Professor in Supply Chain Management – Logistics, Department of Agribusiness and Supply Chain Management, Agricultural University of Athens, Thiva, Greece

ID 294      Automated Guided Vehicles (AGVs) in Warehousing Industry: A Literature Review

Miltiadis Ntotis, Cranfield University, School of Management, United Kingdom

Ilias Vlachos, Full Professor in Supply Chain Management, Excelia Business School, Excelia Group, La Rochelle, France

ID 295      Supply Chain Control Towers: Integrative Human, Operational, and Technological Capabilities

Ilias Vlachos, Full Professor in Supply Chain Management, Excelia Business School, Excelia Group, La Rochelle, France

ID 296      Exploring Non-Motorized Transport as A Transport System: Lessons from Thohoyandou CBD.

Joel Oseifuah and Trynos Gumbo, Faculty of Engineering and Built Environment, Department of Town and Regional Planning, University of Johannesburg, Johannesburg, South Africa

James Chakwiziram, Faculty of Natural and Agricultural Sciences, Unit for Environmental Sciences and Management, Department of Urban and Regional Planning, North-West University, Potchefstroom, South Africa

 ID 299      Comparative Analysis of Social Media Activities on Local Skincare Brands in Indonesia during the COVID-19 Pandemic            

Amanda Dwi Lestari, Chairunnissa Nur Aulia Adiba, Puspita Shabira, Yohannes Kurniawan, Information Systems Department, School of Information Systems, Bina Nusantara University, Jakarta, Indonesia, 11480

ID 301      The Impact of Servitization on Manufacturing Industry: A Literature Review and Prospects for Future Research

Rahman Dwi Wahyudi, Moses Laksono Singgih, Mokh Suef, Industrial and System Engineering, Faculty of Industrial Technology and Systems Engineering, Institut Teknologi Sepuluh Nopember, Surabaya-Indonesia

 ID 302      Impact of Halal Certification on Peanut Pie Supply Chain Performance

Dini Wahyuni, PhD Student at Department of Industrial Engineering, Faculty of Engineering, Universitas Sumatera Utara, Medan, Indonesia

Nazaruddin, Department of Industrial Engineering, Faculty of Engineering, Universitas Sumatera Utara, Medan, Indonesia

Irwan Budiman, Department of Industrial Engineering, Faculty of Technology and Computer Sciences, Universitas Prima Indonesia, Medan, Indonesia

Rahel Ulina Pangaribuan, Department of Industrial Engineering, Faculty of Engineering, Universitas Sumatera Utara, Medan, Indonesia

 ID 303      Faults Handling in Chilled Water System Maintenance Program

Malek Almobarek and Kepa Mendibil, PhD Student, Department of Design, Manufacturing, and Engineering Management, Faculty of Engineering, University of Strathclyde, Glasgow, United Kingdom

Abdallah Alrshdan, Assistant Professor, College of Engineering, Alfaisal University, Riyadh, Kingdom of Saudi Arabia

 ID 304      Analysis and Preventive Maintenance of Gas Engines in Gas Engine Power Plants

Sambudi Hamali, Danang Prihandoko, Shelvy Kurniawan, Kenny Wijaya, Rohmat Hidayatulloh Hazim Habibi, Management Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jl. K.H. Syahdan No. 9, Palmerah, Jakarta 11480, Indonesia

ID 305      Design and Evaluate a Process for Teaching Engineering Students about Heuristic Decisions and Cognitive Biases

Narucha Tanaiutchawoot, Full Lecturer Professor of Industrial Engineering, Faculty of Engineering, Suranaree University of Technology, Nakornradchasrima, Thailand

ID 306 Analyzing the Impact of Digital Payment on Efficiency and
Productivity of Commercial Banks – A Case Study in China

WANG Haopeng, Aldy Gunawan, School of Computing and Information Systems, Singapore Management University, Singapore

ID 314      A Case Study on The Improvement of Organizational Operational Efficiency Through Quality Management Systems Iso 9001

Dianne Lee M. Fullante and Sherry Lynn A. Alvarez , Researcher, Industrial Engineering Department, College of Engineering, Adamson University, Manila, Philippines

Noe D. Enriquez, PIE, ASEAN Eng., Research Co-Adviser, Director, IPPDO
Adamson University

Dr. Venusmar C. Quevedo, PIE, ASEAN Eng., Research Adviser
Vice President for Administration, Adamson University

ID 316      The Role of Customer Value Co-Creation Behavior in Business Management

Tiurida Lily Anita, Faculty of Economy and Communication, Hotel Management Department, Bina Nusantara University, Jakarta, Indonesia

Tujuh Martogi Siahaan, Faculty of Economy & Business, Service Management, Trisakti University, Jakarta, Indonesia

Asep Suparman, Faculty of Business and Management, Department of Sea Transportation, Trisakti Institute of Transportation and Logistics, Jakarta, Indonesia

Hermanto Yaputra, Faculty of Economy & Business, Magister Management, Trisakti University, Jakarta, Indonesia

ID 317      Distributed Manufacturing and Supply Chains, Applying Multi-Attribute Decision Supporting System

Robert Istvan Radics, Senior Lecturer in Supply Chain Management, Faculty of Agribusiness and Commerce, Lincoln University, Lincoln, New Zealand

Muhammad Umar, Lecturer in Supply Chain Management, Faculty of Agribusiness and Commerce, Lincoln University, Lincoln, New Zealand

Linh NK Duong, Senior Lecturer in Supply Chain Management, Bristol Business School, The University of the West of England, Bristol, England

ID 318      Indonesian Generation Z’s Awareness of Data Privacy in the Use of Social Media                      

Nathaniel Adrian, Lindawaty, Destiana Friska, Yohannes Kurniawan, Information Systems Department, School of Information Systems
Bina Nusantara University, Jakarta, Indonesia, 11480

ID 319      Analysis of Interviewing Experts in Weightage for Start-Up Business Factors of Edible Bird Nest Swiftlet Ranching Industry

Puspa Liza Ghazali, Anis Aniza Abdul Hadi, Nik Hazimi Mohamad Foziah, Salman Lambak, Faculty of Business and Management, Universiti Sultan Zainal Abidin, 21300 Kuala Nerus. Terengganu. Malaysia.

Ibrahim Sulaiman Mohammed and Mustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, 22200 Besut. Terengganu. Malaysia.

Eni Noreni Mohamad Zain, 4Faculty of Entrepreneurship and Business, Universiti Malaysia Kelantan, 16100 Kota Bharu, Kelantan

Rabiatul Adawiyah Abdul Rohim, Faculty of Medicine, Universiti Sultan Zainal Abidin, 20400, Kuala Terengganu, Terengganu, Malaysia

ID 320      Effect of Rising Cost and Worker Shortage on Industry

Sheikh F. Ferdous and M. Affan Badar, Department of Applied Engineering and Technology Management, Indiana State University, Terre Haute, Indiana 47809, USA

Yuetong Lin, Department of Engineering and Technology, Embry-Riddle Aeronautical University – Worldwide, Daytona Beach, FL 32114, USA

ID 322      Action Research of Product Innovation based on the Recent Trends in Improving Sales Performance

Vinny Charlene Tedja, Renaldy Widjaya, Eriana Astuty, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Bandung Campus, Bandung, Indonesia, 40181

 ID 323      Third-Party Online Food Delivery vs Silo Fast-Food Restaurant Application, Which One Will Sustain in Greater Jakarta?   

Elizabeth Angeline, Alex, Geraldine Stefie Carolina Tando, Yohannes Kurniawan, Information Systems Department, School of Information Systems, Bina Nusantara University

ID 327      Replicability Assessment of a 3D-Printed Mold with Advanced Polymers and Chemical Smoothing

Christian Leon-Cardenas, Patrich Ferretti, Gian Maria Santi, Giulia Alessandri, and Mattia Cristofori, Department of Industrial Engineering, Alma Mater Studiorum University of Bologna, Viale Risorgimento, 2 – 40136, Bologna, Italy

ID 328      Electric Vehicle Routing Problem with Flexible Deliveries

Mir Ehsan Hesam Sadatia,b, Vahid Akbaric, Bülent Çataya,b, a Faculty of Engineering and Natural Sciences, Sabanci University, Istanbul, Turkey, b Smart Mobility and Logistics Lab, Sabanci University, Istanbul, Turkey, c Nottingham University Business School, University of Nottingham, Jubilee Campus, Nottingham NG8 1BB, United Kingdom

ID 329 The Importance of Human Resource Management in Corporate Social Responsibility Practices: A Case Study from a Brazilian Public Company Focused on Energy Operations Service

Wagner Luiz Botnar and Gisele de Oliveira Andrade, School of Management, Federal University of Paraná, Curitiba, Paraná, Brazil

Guilherme F. Frederico, Professor of Operations, Supply Chain and Project Management, School of Management, Federal University of Paraná Curitiba, Paraná, Brazil

Simone Cristina Ramos and Germano Glufke Reis, Associate Professors, School of Management, Federal University of Paraná, Curitiba, Paraná, Brazil

ID 330      Cultivating Customer Purchase Intention through Meaningful Social Media Marketing Activities

William Julianto Muliadi and Eriana Astuty, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Bandung Campus, Bandung, Indonesia, 40181

ID 331      The Impact of Endorser on Social Media Engagement and Consumers’ Purchase Intention: Case of Indonesian Footwear Brands

Nisryna Nabyla Putri and Tasya Safira Putri Sadewo, Creative Marketing Program, Management Department, BINUS Business School Master Program, Bina Nusantara University, Jakarta, Indonesia 11480

Artha Sejati Ananda, Management Department, BINUS Business School Master Program, Bina Nusantara University, Jakarta, Indonesia 11480

 ID 333 Analysis of Advertising, Brand Image, E-Word Mouth and
E- Servqual on Buying Decisions to Shopee in Tangerang

Thania P. Dewi, John Tampil Purba and Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

ID 334      Social Media Marketing: Activities and Its Impact to The Sales Performance

Zelina Devia, Eriana Astuty, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Bandung Campus, Bandung, Indonesia

ID 335      Business Performance Management for SMEs: Country-Specific Differences in Performance Drivers Lead to Different Requirements

Rudolf Grünbichler, Researcher, Faculty of Mechanical Engineering and Economic Sciences, Graz University of Technology, Graz, Österreich

Jozef Klučka, Assoc. Prof., Faculty of Security Engineering, University of Žilina, Žilina, Slovakia

ID 337  Analysis of Consumer Perceptions of Interest in Buying
Halal Hand Soap Products

Juliza Hidayati and Sawarni Hasibuan, Departement of Industrial Engineering, Faculty of Engineering, Universitas Sumatera Utara, Medan, Indonesia

Rosdanelli Hasibuan, Departement of Chemical Engineering, Faculty of Engineering, Universitas Sumatera Utara, Medan, Indonesia

ID 338      Building the Effectively Customer Engagement in Improving Sales Performance

Ivonne Giovanny, Eriana Astuty, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Bandung Campus, Bandung, Indonesia, 40181

ID 339 Determining The Winner of LPG Project Tender with
A Multi Expert Multi Criteria Decision Making

Eki Febridiko, Industrial Engineering Master Student, Faculty of Engineering, Universitas Mercu Buana, Jakarta, Indonesia

Sawarni Hasibuan, Departement of Industrial Engineering, Faculty of Engineering, Universitas Mercu Buana, Jakarta, Indonesia

ID 340      Ultrasound Image Segmentation using a Combination of Edge Enhancement and Kirsch’s template Method to detecting Follicles in Ovaries

Siti Nur Balqish Binti Azli @ Mohd Azlia, Graduate Student, Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering and Bulit Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor, Malaysia

Noraishikin Zulkarnain, Senior Lecturer of Department of Electrical, Electronic and Systems, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, Malaysia

Asma’ Amirah Nazarudin, Master Student of Department of Electrical, Electronic and Systems, Faculty of Engineering and Built Environment Universiti Kebangsaan Malaysia, Bangi, Malaysia

Siti Salasiah Mokri, Senior Lecturer of Department of Electrical, Electronic and Systems, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, Malaysia

Mohd Faizal Ahmad, Clinical Specialist and Lecturer, Department Of Obstetrics and Gynaecology, Faculty of Medicine, Universiti Kebangsaan Malaysia, Cheras, Kuala Lumpur, Malaysia

ID 343    Mental Workload Assessment and Neuroergonomics Approach of Private Car Drivers Passing Along the Epifanio de los Santos Avenue (EDSA)

Ma. Isabelle J. Delos Santos, Regille Kyle C.Villareal
Researcher, Industrial Engineering Department, Adamson University
Sheily Mendoza, PIE, ASEAN Eng., Research Co-Adviser, Adamson University
Dr. Venusmar C. Quevedo, PIE, ASEAN Eng., Research Adviser, Vice President for Administration
Adamson University

 ID 344      Improving Stock Market Intraday Prediction by Generative Adversarial Neural Networks

Badre Labiad and Abdelaziz Berrado, AMIPS Research Team, Ecole Mohammadia d’Ingénieurs, Mohammed V University in Rabat, Morocco

Loubna Benabbou, Département Sciences de la Gestion, Universit du Québec Rimouski (UQAR), Campus de Lévis, Québec Canada

ID 345      Evaluating the Accuracy of LSTM Forecasting Model and Intervention Programs in Combating Covid-19

Pauline Kay S. De Guzman, Addie Rafaella P. Honolario
Researcher, Industrial Engineering Department, Adamson University, Philippines
Noe D. Enriquez, PIE, ASEAN Eng., Research Co-Adviser, Director, IPPDO, Adamson University, Philippines
Dr. Venusmar C. Quevedo, PIE, ASEAN Eng., Research Adviser, Vice President for Administration, Adamson University, Philippines

ID 348      Cross Sectional Dependency and Panel Unit Root Tests: Foreign Direct Investment in Indonesia

Sidik Budiono and John Tampil Purba, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

ID 349     Employee’s Performance of Production Division in a Textile Firm in Indonesia

Haryadi Sarjono, Management Departement, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia

Heppy Yohanes, Sekolah Tinggi Teologi Bethel The Way (STTB The Way), Jakarta, Indonesia

ID 350 Towards Resilient Educational System and Governance: Measuring Effectiveness and Competitiveness of Private HEIs

Jocelyn Delgado-Abad, Student in Ph.D. Business Management major in Strategy Management, Graduate School of Business and Management
Philippine Christian University, Manila, Philippines

ID 351      Combining Customer and Sustainability Requirements in Quality Function Deployment for a Composite Aircraft Structure

Sezen Ayber, Ph.D. Candidate in Industrial Engineering, Institute of Graduate Programs, Eskisehir Technical University, Eskişehir, Turkey

Nihal Erginel, Professor in Industrial Engineering, Faculty of Engineering, Eskisehir Technical University, Eskişehir, Turkey

ID 352      Towards a Basis for Policy Framework for Stockouts and Shortages of Drugs

Alvin Carlo J. Calucin, RPh, MBA, Student, Doctor of Philosophy in Business Management – Major in Strategy Management, Philippine Christian University, Manila, Philippines

ID 353      The Affect of Digital Transformation on Leadership in Shariah Bank: A Literature Review

Nila Astiti, Department of Management, Faculty of Economics and Business, Padjajaran University, Bandung, Indonesia

Yudi Ahmad Faisal, Department of Management, Faculty of Economics and Business, Padjajaran University, Bandung, Indonesia

ID 357      Analyzing the Relationship between Equipment Operation Time toward the Queueing Problem of the Head Truck During Loading and Unloading Activity in the Container Yard

Fani Fafas Tafia and Sri Susilawati Islam, Industrial Engineering, Faculty of Engineering and Technology, Sampoerna University, Jakarta, Indonesia

ID 358      Customer Acceptance on Smart Medical Application

Tiurida Lily Anita, Hotel Management Department, Faculty of Economics and Communication, Bina Nusantara, UniversityJakarta, Indonesia

Athea Sarastiani, Service Management, Trisakti University, Jakarta, Indonesia

Totok Sugiharto, Post Graduate Program, Pelita Harapan University, Tangerang, Indonesi

ID 359      CLIQUE: A Web-Based Queue Management System with Real-Time Queue Tracking and Notification of Units for Angeles University Foundation Office of the University Registrar

Marc Lester Z. Mallari, Joshua S. Guintu, Yoben C. Magalong, and Daisy S. Yap, College of Computer Studies, Angeles University Foundation Angeles City, Philippines 2009

 ID 362      Usability Evaluation and User Acceptance of Cobot: Case Study of Universal Robots CB Series.

Yada Sriviboon and Arisara Jiamsanguanwong, Department of Industrial Engineering, Chulalongkorn University, Bangkok, Thailand

ID 363      Improving of Financial Flexibility and Distress on Consumer Goods Manufacturers in Indonesia

Cindy Hartanto Osman, Researcher, Faculty of Business, Management, President University, Bekasi, Indonesia

Purwanto, Associate Professor, Faculty of Business, Management, President University, Bekasi, Indonesia

ID 364      Impact of Technology Adoption in Forward Logistics: A Quantitative Approach

Gourav Tiwari and Vijaya Dixit, Operation Management, Indian Institute of Management Ranchi, Jharkhand, India

ID 366      Comparative Study of Manual Washing and Galangal Machine Washing: A Case Study of Uttaradit Province, Thailand.

Chatchaphon Ketviriyakit, Lakkana Ruekkasaem and Supalux Jairueng*, Faculty of Industrial Technology, Phranakhon Rajabhat University, Bangkok, Thailand.

Phamorn Silapan, Department of Electrical Engineering, Faculty of Engineering and Industrial Technology, Silpakorn University, Nakornpathom, Thailand

 ID 367      Quality Control and House of Quality Analysis Process Of The Product Of The Petroleum Pump In Pt. Xyz

Jane Chatrine Antonia Sujanto and Kevin Adrian, Student of Industrial Engineering, Faculty of Engineering, Tarumanagara University, Jakarta, Indonesia

Lina Gozali, Lecturer in Industrial Engineering, Faculty of Engineering., Tarumanagara University, Jakarta, Indonesia

Ahad Ali, Industrial Engineering Department, Lawrence Technological University, Southfield, Michigan 48076, USA

ID 368 A systematic modelling of Industry 4.0 technologies: an ISM-based approach
Bhavesh Bhatnagar and Vijaya Dixit, Operations Management Area, Indian Institute of Management Ranchi, Jharkhand, India

ID 369      Determine the Coordinate of Distribution Centre for Disaster Management Using Centre of Gravity

Rienna Oktarina, Faculty Member of Industrial Engineering Department, Faculty of Engineering, Bina Nusantara University, Jakarta, Indonesia

Junita, Student of Industrial Engineering Department, Faculty of Engineering, Bina Nusantara University, Jakarta, Indonesia, 11480

 ID 370      Application of Distribution Activity Planning with Distribution Requirement Planning Method on Pump Products in PT. XYZ

Tasya Monica and Vanecia Marchella Hardinanerl, Student of Industrial Engineering, Faculty of Engineering, Tarumanagara University, Jakarta, Indonesia

Lina Gozali, Lecturer in Industrial Engineering, Faculty of Engineering, Tarumanagara University, Jakarta, Indonesia

Ahad Ali, Industrial Engineering Department, Lawrence Technological University, Southfield, Michigan 48076, USA

ID 371      New Layout Design for PT ABC Using Systematic Layout Planning and CORELAP Methods with ANN’s Forecasting Production Capacity at Repackaging Company
Felita Yulianti, Lina Gozali, Adianto, and Laurencia Tiffany, Department of Industrial Engineering, Faculty of Engineering, Universitas Tarumanagara Jl. S. Parman No 1, Jakarta, 11440, Indonesia

 ID 372 The Development of Several Marketing Models in Performance Measurement in Industrial and Business Management Systems
Lina Gozali, Agustinus Purna Irawan, Hetty Karunia Tunjungsari, Caroline De Candra, Vivian Lim, Ryu Nowescophor, and Ariawan Gunadi, Department of Industrial Engineering, Faculty of Engineering, Universitas Tarumanagara, S. Parman Street Number 1, Jakarta 11440, Indonesia

Teuku Yuri M. Zagloel, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, UI Depok Campus, Indonesia

Habibah Norehan Haron and Maslin Masrom, Razak Faculty of Technology and Informatics, Malaysian Technology University, Sultan Yahya Petra Street, Kuala Lumpur 54100, Malaysia

Benny Tjahjono, Centre for Business in Society, Coventry University
Priory St, Coventry CV1 5FB, United Kingdom

Docki Saraswati, Department of Industrial Engineering, Universitas Trisakti
Jl. Kiai Tapa no: 1. Jakarta, Indonesia 1440

Ahad Ali, Industrial Engineering Department, Lawrence Technological University, Southfield, Michigan 48076, USA

ID  373  Quality Control Analysis, Six Sigma, Dmaic and Root Cause Analysis of Ring Cvt (Case Study at Pt. Denapella Lestari)

Ignacia Claresta and Jennifer Juyanto, Student of Industrial Engineering, Faculty of Engineering, Tarumanagara University, Jakarta, Indonesia

Lina Gozali, Lecturer in Industrial Engineering, Faculty of Engineering, Tarumanagara University, Jakarta, Indonesia

Ahad Ali, Industrial Engineering Department, Lawrence Technological University, Southfield, Michigan 48076, USA

 ID 374      Raw Material Warehouse Layout Design Using Class-Based Storage Method and ProModel Simulation and FlexSim Simulation at
Automotive Assembling Company

Melynia Novita Pratama, Lina Gozali, Frans Jusuf Daywin, Venny Vioren, Department of Industrial Engineering, Faculty of Engineering Universitas Tarumanagara, Jl. S. Parman No 1, Jakarta, 11440, Indonesia

ID 375      Safety Risk Management Analysis at Pt. Xyz Using the Hiradc and Fmea Approach

Bready Fernando, Alyssa Felicia Wijaya Yakup, Lina Gozali, Student of Industrial Engineering, Faculty of Engineering, Tarumanagara University, Jakarta, Indonesia

Ahad Ali, Industrial Engineering Department, Lawrence Technological University, Southfield, Michigan 48076, USA

ID 376      Forecasting and Production Planning, Inventory, Capacity, and Distribution Control in Y-Strainer Production in Metal Fitting Industry

Natalia Velony Putri, Lina Gozali, Helena Juliana Kristina, Vivian Lim, Department of Industrial Engineering, Faculty of Engineering, Universitas Tarumanagara, Jl. Letjen S. Parman No. 1, Jakarta 11440, Indonesia 

ID  377 Production Layout Replanning Using Systematical Layout Planning with Shared Storage Method Analysis and Flexsim Simulation in Garment and Textile Company

James Laurent, Lina Gozali, Ricky Farrel, Carla O. Doaly, Department of Industrial Engineering, Faculty of Engineering, Universitas Tarumanagara, Jl. S. Parman No 1, Jakarta, 11440, Indonesia

ID 378 Product Design and Experiment on Espresso Machine Portafilter Using Reverse Engineering And Vdi 2221 Methods

Alvan Nathanael, Evera Olivia, Lina Gozali, Frans Jusuf Daywin, Department of Industrial Engineering, Faculty of Engineering, Universitas Tarumanagara, Jl. S. Parman No 1, Jakarta, 11440, Indonesia

 ID 379   TRENDSAFE: Intrusion Alarm System for Smart Home Protection and Security Using Arduino with SMS Notification
Recy Anne C. Dequiros, Chelsea Liezl A. Catacutan, Jonel V. Dela Cruz, Kirvy Dawn G. Ziganay, and Benedict M. Guarin, College of Computer Studies, Angeles University Foundation, Angeles City, Pampanga, Philippines

 ID 380      Developing a Research Model for the Effects of Organizational Structure’s Agility, Team Autonomy, and Emerging Leadership in Teams on Agile Project Performance

Hamit Metin Ornek, Ph.D. Student of Management Engineering, Faculty of Engineering and Natural Sciences, Bahçesehir University, Besşiktaş, Istanbul, Turkey

Assist. Prof. Alper Camcı, Assistant Professor in Management Engineering, Faculty of Engineering and Natural Sciences, Bahçesehir University Besşiktaş, Istanbul, Turkey

 ID 381      Re:SCN: A Web–based Report Management System with RFID–Based Vehicle Monitoring for Villa Belen

Joseph Raphael Canlas, Kenan Kerl Punsalang, Erwin Galura, Lester Herrera and Jonh Ray Medina, College of Computer Studies, Angeles University Foundation, Angeles City, Pampanga, Philippines

 ID 382      Development of Traveling Friends Search Service Through Mobile Application “Destinasi”

Tallita Almira Harvy, Talitha Manggiasih, and Rienna Oktarina, Industrial Engineering Department, Faculty of Engineering, BINUS University, Jakarta, Indonesia

 ID 383      AUFound: Retrieval of Misplaced Personal Belongings Through Mobile Application and Web-Based Management System Designed for Angeles University Foundation

Erwin Castro, Kaila David, Kim De Silva, Lester Roxas, College of Computer Studies, Angeles University Foundation, Angeles City, Pampanga, Philippines

Joyce Macaspac, Faculty, College of Computer Studies, Angeles University Foundation, Angeles City, Pampanga, Philippines 

 ID 385      An Analysis Efficiency of Long-Term Scheduling in The Production Process of Manufacturing Companies: A Systematic Literature Review

Hugo Geraldy Tanara, Lilya Syopiana, Livia Putri, Haryadi Sarjono, BINUS Business School Undergraduate, Bina Nusantara University, Management Department,Jl. KH. Syahdan No. 9, Palmerah, Jakarta Barat, Indonesia 11480

 ID 395      A Review of Road Safety Monitoring
Ibtissam El Khalai, Zoubida Chorfi, Abdelaziz Berrado, Equipe de recherche AMIPS, Ecole Mohammadia d’Ingénieurs, Mohammed V University in Rabat, Morocco

ID 398      The Antecedents of Employee Performance in Consumer Goods Companies during Covid-19 Pandemic

Egga Surya Aditya, Riko Vani Umaiyah, Vega Fitra Agnefo, Abdul Rohman, Binus Business School-Master Program, Bina Nusantara University, Bekasi, Indonesia

ID 400      Green Logistics Framework for Shippers

Nusrat Shaikh, Simon Peter Nadeem, Jose Arturo Garza-Reyes, Center for Supply Chain Improvement, University of Derby, U.K.

Piera Centobelli, Department of Industrial Engineering, University of Naples Federico II, Piazzale Tecchio 80, 80125, Naples, Italy

Luis Rocha-Lona ESCA Santo Tomás, Instituto Politécnico Nacional, Mexico City, Mexico

ID 401      Finding the Best Strategy to Overcome the Crisis, Study Case in The Fashion Business

Dian Kurnianingrum, Iston Dwija Utama, Mulyani Karmagatri, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480

Ricky Mariskuan, International Master of Business Administration. CYCU Business School, Chung Yuan Christian University, Taiwan, Zhongli District, Taoyuan City, 320314

 ID 403 Electricity and Gas Potential of Abattoir Waste
Moses Jeremiah Barasa Kabeyi, Oludolapo Akanni Olanrewaju, Industrial Engineering Department, Durban University of Technology, Durban South Africa

ID 405 Sugarcane Molasses to Energy Conversion for Sustainable Production and Energy Transition 
Moses Jeremiah Barasa Kabeyi, Oludolapo Akanni Olanrewaju, Industrial Engineering Department, Durban University of Technology, Durban South Africa

ID 406  A Techno-economic Assessment of Diesel to Gas Powerplant Conversion
Moses Jeremiah Barasa Kabeyi, Oludolapo Akanni Olanrewaju, Industrial Engineering Department, Durban University of Technology, Durban South Africa

 ID 407  Group Decision Making in Supply Chain Contracting
Ümmühan Akbay, Assistant Professor in Management, Faculty of Economic, Administrative and Social Sciences, Işık University
Istanbul, Turkey

ID 409      Performance Analysis and Development of an Export Cogeneration Plant For A 3000 Tcd Sugar Cane Factory

Moses Jeremiah Barasa Kabeyi, Oludolapo Akanni Olanrewaju, Department of Industrial Engineering, Faculty of Engineering and the Built Environment, Durban university of Technology, Durban, SA

ID 410      Assessment of Logistics Operations Performance of Modjo Dry Port, Ethiopia

Meron Tamrat Assefa, Regional Operations Associate, United Nations Capital Development Fund, Addis Ababa, Ethiopia

Seid Mohamedbirhan Nuru Center for Supply Chain Improvement, University of Derby, U.K.

Simon Peter Nadeem, Center for Supply Chain Improvement, University of Derby, U.K.

ID 411      Preliminary Design of a Cogeneration Plant for a 120 MW Diesel engine Power Plant

Moses Jeremiah Barasa Kabeyi, Oludolapo Akanni Olanrewaju, Industrial Engineering Department, Durban University of Technology, Durban South Africa

 ID 412      A Systematic Review on Contractual Challenges in Construction Industry Relate to a Pandemic Situation (COVID 19)

R.D.W.W.Jayathilaka and K.G.A.S.Waidyasekara f, Department of Building Economics, University of Moratuwa, Sri Lanka

ID 413  Integrated Structural Damage Assessment Using Aerial Images For Bridges

Kasim A. Korkmaz, School of Visual and Built Environments, Eastern Michigan University, Ypsilanti, MI, USA

Munther Abualkibash, School of Information Security and Applied Computing, Eastern Michigan University, Ypsilanti, MI, USA

 ID 414      Innovative Mixed-Reality Simulations to Enhance Collaborative Team Skills in Global Engineering Teams: A Research Proposal

Mesut Akdere, Professor of Human Resource Development, Polytechnic Institute, Purdue University, West Lafayette, IN 47907, USA
Yeling Jiang, Doctoral Candidate of Human Resource Development, Polytechnic Institute Purdue University, West Lafayette, IN 47907, USA
Minsoo Choi, Doctoral Student of Computer Graphics Technology, Polytechnic Institute, Purdue University, West Lafayette, IN 47907, USA

ID 416      A Bibliometric of Sentiment Analysis in Tourism Industry during COVID-19 Pandemic

Asra Yaqub and Huda Thalib, Student at the Computer Science Department, College of Engineering, Effat University, Jeddah, Saudi Arabia

Tayeb Brahimi, Associate Professor at the College of Engineering, Energy and Technology Research Centre, Natural Science, Natural Science, Mathematics and Technology Unit, Effat University, Jeddah, Saudi Arabia

Akila Sarirete, Assistant Professor at the Computer Science Department, College of Engineering, Effat University, Jeddah, Saudi Arabia

ID 417  AI-Based Analysis for Industry 4.0 Maturity Models – A Systematic Review and Bibliometric Analysis

Sadeem Almarri and Abdelghani Bouras, Department of Industrial Engineering, Alfaisal University, Riyadh12714, Saudi Arabia

 ID 418      Sunscreen Based on Stevia Leaf Extract (Stevia rebaudiana) as Anti-UV and Antioxidant

Kun Harismah, Muhammad Ilham Maulana, Diny Febri Yanti, Denny Vitasari, Chemical Engineering, Faculty of Engineering, Universitas, Muhammadiyah Surakarta, Surakarta, Indonesia

Erindyah Retno Wikantyasning, Faculty of Pharmacy, Universitas Muhammadiyah Surakarta, Surakarta, Indonesia

Mahmoud Mirzaei, Child Growth and Development Research Center, Research Institute for Primordial Prevention of Non-Communicable Disease, Isfahan University of Medical Sciences, Isfahan, Iran

Kun Arsanti Dewi, Dinas Perumahan dan Kawasan Permukiman Kota Magelang, Magelang, Indonesia

 ID 419      4.0 IN 40 SERIES: An Extension Program to Develop AWARENESS FOR INSUSTRY 4.0

Vitor Mendes Caldana, Dalton Oswaldo Buccelli and Guilherme Galiazzi Carriel de Lima, Instituto Federal de Educação, Ciência e Tecnologia de São Paulo, Sorocaba, São Paulo, Brasil

 ID 420 A review about maturity models development process,
Case of performance management in Education

Hind Benlhabib, Abdelaziz Berrado, Equipe AMIPS, Ecole Mohammadia d’Ingénieurs, Mohammed V University in Rabat, Morocco

 ID 428      Energy Transition Models and Modelling Tools
Moses Jeremiah Barasa Kabeyi, Industrial Engineering Department, Durban University of Technology, Durban South Africa

Oludolapo Akanni Olanrewaju, Industrial Engineering Department, Durban University of Technology, Durban

 ID 429  Sustainability Assessment for Non-Combustible Renewable Power Generation

Moses Jeremiah Barasa Kabeyi  and Oludolapo Akanni Olanrewaju, Industrial Engineering Department, Durban University of Technology, Durban South Africa

ID 430      Sizing of Photovoltaic System (State of an Industry Unit)

Bouziane Khadidja and Chaouch Noura, Doctor in process Engineering, Faculty of applied Sciences, Kasdi Merbah University, Ouargla, Algeria
Azoui Boubakeur, Full Professor of electrotechnical Engineering, Hadj Lakhdar University, Batna, Algeria

ID 434      The Effect of Foreign aid and Vocational Training on Poverty Reduction Strategy: An Empirical Evidence from Chad Republic

Abd Rahman Ahmad, Khalil Abakar Moussa Kaya and Ganama Moustapha Gueme, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia

ID 435      The Concept of Community Policy and Community Happiness Initiative in the UAE

Abd Rahman Ahmad and Tareq Jumuaa Al Junaibi Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia

Hairul Rizad Md Sapry, Industrial Logistic, Universiti Kuala Lumpur – Malaysian Institute of Industrial Technology (UniKL MITEC)

ID 436      The Mediating Role of Knowledge Sharing on The Relationship Between Transformational Leadership, Organizational Culture, and Education Quality

Mohammed Alzoraikil and Abd Rahman Ahmad, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia

ID 438      Application of The Fuzzy Analytical Hierarchy Process Method on Soil Drilling Projects

Haryadi Sarjono, Antonius, Hilman Rizky Subhadin and Ridani Faulika Santalia, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia

Heppy Yohanes, Sekolah Tinggi Teologi Bethel the Way (STTB The Way)
Jakarta, Indonesia

 ID 443      A literature Review on Multi-echelon Inventory Management Policies: Case of Assembly Systems

Nouçaiba Sbai and Abdelaziz Berrado, Equipe AMIPS, Ecole Mohammadia d’Ingénieurs, Mohammed V University in Rabat, Morocco

 ID 445      How Dynamic Capability in The Port Industry? Systematic Literature Review

Dicky Hida Syahchari, Hardijanto Saroso, Cooky Tri Adhikara, and Melisa, Management Department, BINUS Business School, Bina Nusantara University, Jakarta, 11480, Indonesia

 ID 448      Measuring Social Presence in Virtual Social Game Experience

Christabel Parung, Dian Prianka and Viviany, Faculty of Creative Industries, University of Surabaya, Surabaya, Indonesia 

ID 449      Virtual Social Game Experience: The Definitions and Determining Factors

Dian Prianka, Christabel Parung and Viviany Faculty of Creative Industries, University of Surabaya, Surabaya, Indonesia

 ID 450      Modeling mode choice preference in a Mexican university with discrete choice models

Juan Estrada-García, Juliana Figueroa, Ezequiel González, Jenny Díaz-Ramírez, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, Mexico

 ID 451      Detection and Analysis of Barriers to Truck Driver Performance for Safe Transportation

Cansu Akçicek, Research Assistant in Graduate School, Yaşar University, Izmir, Turkey
Yucel Ozturkoglu, Full Professor of Logistics Management, Faculty of Business, Yaşar University, Izmir, Turkey
Omer Ozturkoglu, Assoc. Professor in Business Administration, Faculty of Business, Yaşar University, Izmir, Turkey; and Department of Engineering, Birmingham City University, Birmingham, UK

ID 452 The Development of Several Methods in Performance Measurement in Industrial and Business Management Systems
Lina Gozali, Agustinus Purna Irawan, Hetty Karunia Tunjungsari, Caroline De Candra, Vivian Lim, Ariawan Gunadi, Department of Industrial Engineering, Faculty of Engineering, Universitas Tarumanagara, S. Parman Street Number 1, Jakarta 11440, Indonesia

Teuku Yuri M. Zagloel, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, UI Depok Campus, Indonesia

Maslin Masrom and Habibah Norehan Haron, Razak Faculty of Technology and Informatics, Malaysian Technology University, Sultan Yahya Petra Street, Kuala Lumpur 54100, Malaysia

Benny Tjahjono, Centre for Business in Society, Coventry University
Priory St, Coventry CV1 5FB, United Kingdom

Docki Saraswati, Department of Industrial Engineering, Universitas Trisakti
Jl. Kiai Tapa no: 1. Jakarta, Indonesia 1440

Ahad Ali, Industrial Engineering Department, Lawrence Technological University, Southfield, Michigan 48076, USA

Jose Arturo Garza-Reyes, Head of The Centre for Supply Chain Improvement, University of Derby, UK

 ID 453  An Efficient Simulation Algorithm to Compute Collision Probability in a Parallel Machines Model with Buffers

Taiki Otsuka, Faculty of Business Design and Informatics, Tsukuba Gakuin University, Tsukuba, Ibaraki, Japan

Eishi Chiba, Department of Industrial and Systems Engineering, Faculty of Science and Engineering, Hosei University, Tokyo, Japan

ID 458    Modeling & Optimization of a Multi-Echelon Multi-Objective Humanitarian Logistics Model Using Branch & Cut Algorithm

Dr. Ferdous Sarwar, Pritam Deb, Seemanto Saha, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh

 ID 460      Environmental Impact Assessment for an Optometry Manufacturing Industry

M. Manyuchi and N. Sukdeo, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa

 ID 461      The Moderating Role of Job Enrichment: When Millennial Characters Have a Negative Relationship on Organizational Performance (Case Study at Social Insurance Company in Indonesia)

Indri Fajria Musfiroh, Masfu Hanik and Nugroho J. Setiadi, Management Department, Business Management Program, Business School Master Program, Bina Nusantara University, Jakarta, Indonesia, 11480

 ID 463      Finding Faculty Dissatisfaction Through Incivility, Commitment and Being Engaged

Anita Maharani, Blended Learning Program, Management Departement, BINUS Business School Master Program, Bina Nusantara University, Jakarta, Indonesia 11480

Dewi Tamara, Executive in Strategic Management Program, Management Departement, BINUS Business School Master Program, Bina Nusantara University, Jakarta, Indonesia 11480

Vini Marianie Vici, Fast Track Program, Management Departement, BINUS Business School Master Program, Bina Nusantara University, Jakarta, Indonesia 

ID 469      A Review of Employees Training and Development in Navigating through Pandemic Covid-19: Malaysian Perspective

Ahmed Saleh Ahmed Saif Al-Shameri, PhD Student and SITI SARAH BINTI OMAR, Senior Lecturer, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Johor, Malaysia

ID 470      Exploring the Factors Affecting in the Adoption of E-Learning Systems in COVID-19 Pandemic: The Higher Education Students Perspectives

Lianna Wijaya, Faculty Member, Management Department, BINUS Online Learning, Bina Nusantara University, Jakarta, Indonesia

Santi Santi, Head of Management Program Study, Faculty of Management, STIE BISMA LEPISI, Tangerang, Indonesia

Hermanto Yaputra, Faculty Member, Faculty of Economy and Business Magister Management Trisakti University

ID 472      A Hybrid BWM-SCOR Method for Analysis Electronic Manufacturing Supply Chain Elements that Affected with COVID-19 Pandemic

Patodi Parjuli Kurniawan, Master of Industrial Engineering Student, Universitas Mercu Buana, Jakarta, Indonesia.
Sawarni Hasibuan, Industrial Engineering Department, Universitas Mercu Buana, Jakarta, Indonesia

ID 473      Relationship Between Lean Manufacturing Practice and Product Quality in a Halal Food Industry: A Case Study in Tanjung Karang, Selangor, Malaysia

Nur Hidayah Misron, Mohamad Ali Selimin and Lee Te Chuan, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor 86400, Malaysia

ID 474   Design for Supply Chain Performance Measurement in Fast-Food Restaurant Franchise

Dananta Putra Teja, Department of Technology Management, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia, Kampus ITS, Sukolilo, 60111, Indonesia

Iwan Vanany, Department of Industrial and Systems Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia, Kampus ITS, Sukolilo, 60111, Indonesia

ID 475   Automotive Battery Cooling Systems for Electrical Vehicles

Jean-Damien Muller, Advanced Development Technical Leader, Battery Cooling Systems Expert, Valeo Thermal Systems France

ID 476  Planning and Optimization of a Post Disaster Multi-Echelon Humanitarian Logistics Network: A Case Study in Bangladesh Perspective

A.B. M. Mainul Bari, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh

K Jamie Rogers and Jay M Rosenberger, Department of Industrial & Manufacturing Systems Engineering, The University of Texas at Arlington, USA

ID 477   Exploration of the Factors Affecting Efficient Production Planning: A case study of the Ready-Made Garments Industries of Bangladesh

A.B. M. Mainul Bari and Sazzadul Islam Ovi , Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh

ID 490      Academic Dishonesty and Financial Reporting Fraud Intention

Rahayu Abdul Rahman, Sunarti Halid, Norhayati Zamri, Faculty of Accountancy, Universiti Teknologi MARA Perak Branch, Tapah, Perak, Malaysia

Suraya Masrom, Faculty of Computer and Mathematical Sciences, Universiti Teknologi MARA Perak Branch, Tapah Campus, Tapah Road, Tapah, Perak, Malaysia

 ID 491      Analysis of Swallow Nest Export Strategies from Indonesia to China with Export Restriction Regulations

Dony Saputra, Prima Feminita Asihatka, and Elena Putri Sutanto, Management Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesi

ID 492 MBKM-Student Community: Benefits of Students Joining the Community Service Program on Applying Solar Energy in the Development of Agricultural Tourism in Jombang

Agus Sukoco, I Putu Artaya, I Nyoman Sudapet, Elok Damayanti, Ani Wulandari, Tubagus Purworusmiardi, Amrun Rosyid, Departement of Management, Narotama University, Surabaya, Indonesia

Muhammad Ikhsan Setiawan and Sri Wiwoho Mudjanarko, Department of Civil Engineering, Narotama University, Surabaya, Indonesia

Achmad Muchayan, Department of System Information, Narotama University, Surabaya, Indonesia

Cholil Hasyim, Departement of Civil Engeneering, Universitas Darul Ulum Jombang

Kuswanto, Departement of Law, Universitas Darul Ulum Jombang

ID 493  Village Community Service Program: An Opportunity to Implement Solar Power in Agricultural Tourism Development in Jombang, Indonesia

Agus Sukoco, I Nyoman Sudapet, Elok Damayanti, Tubagus Purworusmiardi and Amrun Rosyid, Departement of Management, Narotama University, Surabaya, Indonesia

Muhammad Ikhsan Setiawan and Sri Wiwoho Mudjanarko, Departement of Civil Engeneering, Narotama University, Surabaya, Indonesia

Achmad Muchayan, Department of Information System, Narotama University, Surabaya, Indonesia

Cholil Hasyim and Kuswanto, Universitas Darul Ulum Jombang

Mohd Idrus Mohd Masirin, Department of Civil Engineering FKAAB Universiti Tun Hussein Onn Malaysia, Indonesia

 ID 494      Analysis of the Influence of Digital Economy Collaborative Learning towards Achievement and Recognition of Students and Lecturers of Management Major of Narotama University

Arasy Alimudin, Associate Professor of Strategic Management, Narotama University, Surabaya,Indonesia

Agus Sukoco, Assistant Professor of Entrepreneurship, NarotamaUniversity, Surabaya, Indonesia

Achmad Zakki Falani, Assistant Professor of Informatics Engineering, Narotama University, Surabaya, Indonesia

Ani Wulandari, Lecturer of Management Undergraduate Program, Narotama University, Surabaya, Indonesia

Joko Suyono, Narotama University, Surabaya, Indonesia

ID 498      Solar Infrastructure: MBKM Village Community Service
Program, Narotama University, Surabaya, Indonesia, Connected MBKM, Village and Renewable Energy for Better Village Environment

Muhammad Ikhsan Setiawan, Sri Wiwoho Mudjanarko, Ronny Durrotun Nasihien, Julistyana Tistogondo, Atik Wahyuni, and Diah Ayu Restuti Wulandari, Department of Civil Engineering, Narotama University, Indonesia

Agus Sukoco and Tubagus Purworusmiardi, Department of Management, Narotama University, Indonesia

Cholil Hasyim and Kuswanto, Darul Ulum University, Jombang, Indonesia

 ID 499      Analysis of Relationship between the Comprehension of MBKM Curriculum and the Loyalty of Students and Lecturers of the Narotama University

Arasy Alimudin, Sri Wiwoho Mudjanarko, M. Ikhsan Setiawan, Agus Sukoco, Achmad Zakki Falani, Ani Wulandari, Joko Suyono, Narotama University, Surabaya, Indonesia

ID 500  Urban Solar: Village Community Service Program, Narotama University, Surabaya, Indonesia-Based Renewable Energy Technology

Muhammad Ikhsan Setiawan, Sri Wiwoho Mudjanarko, Ronny Durrotun Nasihien, Julistyana Tistogondo, Hendro Sutowijoyo and Rizal Bahaswan, Department of Civil Engineering, Narotama University, Indonesia

Agus Sukoco, Tubagus Purworusmiardi and Elok Damayanti, Department of Management, Narotama University, Indonesia

Cholil Hasyim and Kuswanto, Darul Ulum University, Jombang, Indonesia

ID 501      Solar Village: Mbkm Village Community Service Program, Narotama University, Surabaya, Indonesia, Student Program and After Studies

Muhammad Ikhsan Setiawan, Sri Wiwoho Mudjanarko, Hendro Sutowijoyo, and Rizal Bahaswan, Department of Civil Engineering, Narotama University, Indonesia

Agus Sukoco, Tubagus Purworusmiardi, and Arasy Alimudin, Department of Management, Narotama University, Indonesia

Cholil Hasyim and Kuswanto, Darul Ulum University, Jombang, Indonesia

ID 502      Innovation of Learning Model in The MBKM (Merdeka Belajar Kampus Merdeka) Curriculum Based on Competency and Web Based Platform as an Easy Process of Education and Professional Exam (Case Study of Accounting Program)

Rony Wardhana, Avi Sunani, Sri Wiwoho Mudjanarko, Ariyani, Frenky Yusuf, Achmad Muchayan, Elok Damayanti and Victor Da Costa Monteiro, Program Studi Akuntansi, Fakultas Hukum, Ekonomi dan Pendidikan, Universitas Narotama, Surabaya, Indonesia

 

ID 503      A Data-Driven Demand planning Framework for an Inventory Management in Textile Industry

Raha Akhavan Tabatabaei, Burak Gökgür, and Reza Valimoradi, Full Professor of Operations Management & Business Analytics, Assistant Professor of Operations Management & Business Analytics, M.Sc. Student in Business Analytics, Faculty of Management, Sabancı University
Orhanli, Tuzla, Istanbul, Turkey

ID 504      MBKM Program, Village Community Learning by Using Good Physical Facilities in Semen Gandusari Village, Blitar

Sri Wiwoho Mudjanarko, M Ikhsan Setiawan, and Rizal Bahaswan, Departement of Civil Engineering, Narotama University, East Java, INDONESIA

Agus Sukoco, I Putu Artaya, Elok Damayanti, Tubagus Purworusmiardi, Departement of Management, Narotama University, Surabaya, INDONESIA

Achmad Muchayan, Department of Information System, Narotama University, Surabaya, East Java, INDONESIA

Rofik Jalal Rosyanafi, Departement of Early Childhood Teacher Education, Narotama University, Surabaya, East Java, INDONESIA

Alfa Izza Ramadhani, Mesakh Yunanto, Student of Civil Engineering, Narotama University, Surabaya, East Java, INDONESIA

Agung Sihono, Semen Village Officials, Gandusari District, Blitar, East Java, INDONESIA

 ID 511      MBKM-KKNT: Readiness of Narotama University Students Involved in Application of Solar Power in Agricultural Tourism Development in Jombang

Agus Sukoco, I Putu Artaya, I Nyoman Sudapet, Elok Damayanti, Ani Wulandari, Tubagus Purworusmiardi, Amrun Rosyid, Departement of Management, Narotama University, Surabaya, Indonesia

Sri Wiwoho Mudjanarko, Muhammad Ikhsan Setiawan, Departement of Civil Engeneering, Narotama University, Surabaya, Indonesia

Achmad Muchayan, Department of Information System, Narotama University, Surabaya, Indonesia

Cholil Hasyim, Departement of Civil Engeneering, Universitas Darul Ulum Jombang

Kuswanto, Departement of Law, Universitas Darul Ulum Jombang

ID 512      Solarpower Pump Renewable Energy Supporting Green Farmers Ploso Geneng Village Jombang Indonesia

Muhammad Ikhsan Setiawan, Atik Wahyuni, Sri Wiwoho Mudjanarko, Julistyana Tistogondo and Diah Ayu Restuti Wulandari, Department of Civil Engineering, Narotama University, Indonesia

Agus Sukoco and Tubagus Purworusmiardi, Department of Management, Narotama University, Indonesia

Cholil Hasyim and Kuswanto, Darul Ulum University, Jombang, Indonesia

Wahyu Mulyo Utomo, Faculty of Electrical and Electronic Engineering, Universiti Tun Hussein Onn Malaysia

ID 513      Digital Entrepreneurship: Implementation & Impact of MBKM Digital Entrepreneurs Narotama University

I Nyoman Sudapet, Agus Sukoco, I Putu Artaya, Elok Damayanti, Ani Wulandari, Tubagus Purworusmiardi, Department of Management, Narotama University, Surabaya, Indonesia

Sri Wiwoho Mudjanarko, Muhammad Ikhsan Setiawan, DepartmentCivil Engineering, Narotama University, Surabaya, Indonesia

Achmad Muchayan, Information System Program Study, Narotama University, Surabaya, Indonesia

ID 514 Digital Entrepreneurship: The Effect of Knowledge on
Students’ Perceptions of the Benefits of MBKM

I Nyoman Sudapet, Agus Sukoco, I Putu Artaya, Elok Damayanti, Ani Wulandari, Tubagus Purworusmiardi, Amrun Rosyid, Departement of Management, Narotama University, Surabaya, Indonesia

Sri Wiwoho Mudjanarko, Muhammad Ikhsan Setiawan, Departement of Civil Engeneering, Narotama University, Surabaya, Indonesia

Achmad Muchayan, Department of Information System, Narotama University, Surabaya, Indonesia

ID 516      Bibliometric Analysis of Project Management Evaluation in Construction Industry

Gebriel Huda, Master Student in Department of Civil Engineering, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, Depok 16424, Indonesia

Mohammed Ali Berawi, Full Professor in Department of Civil Engineering, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, Depok 16424, Indonesia

ID 517      The Role of the Flipped Classroom Pedagogy on the Engagement of Architectural Engineering Students:  An Action Research

Hala Sirror, Assistant Professor of Architecture, College of Architecture
Prince Sultan University, Riyadh, Saudi Arabia

Salma Dwidar, Associate Professor of Architecture, College of Architecture
Prince Sultan University, Riyadh, Saudi Arabia

Amani Derbali – Amal Abdelsattar, Assistant Professor of Architecture,
College of Architecture, Prince Sultan University, Riyadh, Saudi Arabia

Dr. Donia Abdelgawad, Assistant Professor of Architecture, Faculty of Fine Arts, Alexandria University, Alexandria, Egypt

ID 519      The Implementation and Impact of MBKM to Accounting Department of Narotama University

Avi Sunani, Rony Wardhana, Ariyani, Frenky Yusuf, Victor Da Costa Monteiro, Program Studi Akuntansi, Fakultas Hukum, Ekonomi dan Pendidikan, Universitas Narotama, Surabaya, Indonesia

Sri Wiwoho Mudjanarko, Program Studi Teknik Sipil, Fakultas Teknik dan Ilmu Komputer, Universitas Narotama, Surabaya, Indonesia

Achmad Muchayan, Program Studi Sistem Informasi, Fakultas Teknik dan Ilmu Komputer, Universitas Narotama, Surabaya, Indonesia

Elok Damayanti, Program Studi Manajemen, Fakultas Hukum, Ekonomi dan Pendidikan, Universitas Narotama, Surabaya, Indonesia

ID 520      The Implementation and Impact of MBKM to Faculty of Law, Business and Education of Narotama University

Avi Sunani, Rony Wardhana, Ariyani, Frenky Yusuf, Victor Da Costa Monteiro, Program Studi Akuntansi, Fakultas Hukum, Ekonomi dan Pendidikan, Universitas Narotama, Surabaya, Indonesia

Sri Wiwoho Mudjanarko, Program Studi Teknik Sipil, Fakultas Teknik dan Ilmu Komputer, Universitas Narotama, Surabaya, Indonesia

Achmad Muchayan, Program Studi Sistem Informasi, Fakultas Teknik dan Ilmu Komputer, Universitas Narotama, Surabaya, Indonesia

Elok Damayanti, Program Studi Manajemen, Fakultas Hukum, Ekonomi dan Pendidikan, Universitas Narotama, Surabaya, Indonesia

ID 521      A Study on Improving the Vaccination Process of Local Government Units (LGU) in the National Capital Region of the Philippines

Josephine D. German, Marie Angelika T. Bagadiong, Erika Mae D. Costales, and Kelly Margaret V. Magno, School of Industrial Engineering and Engineering Management, Mapua University Intramuros, Manila

ID 522  Determining Newspaper Distribution Routes to Reduce Environmental Emissions with Saving Matrix Method Based on Demand Forecasting for Green Logistics

Tasya Santi Rahmawati, Wulan Istifarrosa, Yuanita Maharani Tampubolon, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Isna Nugraha, Industrial Engineering Department, Faculty of Engineering, Universitas Pembangunan Nasional Veteran Jawa Timur, Surabaya, Indonesia

Wahyudi Sutopo, University Centre of Excellence for Electrical Energy Storage Technology, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Yuniaristanto, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering, Department, Faculty of Engineering
Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 524      Determining the Optimal Route for Newspaper Distribution to Reduce Environmental Emissions for Green Logistics Using the Saving Matrix and Nearest Neighbor Methods Case Study: XYZ Ltd. Surakarta

Annisa Syahliantina, Ainun Rahmansyah Gaffar, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Isna Nugraha, Industrial Engineering Department, Faculty of Engineering, Universitas Pembangunan Nasional Veteran Jawa Timur, Surabaya, Indonesia

Wahyudi Sutopo, Yuniaristanto, University Centre of Excellence for Electrical Energy Storage Technology, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering, Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 525  Selection of the Best Newspaper Forecasting Method Using Holt-Winters and Long Short-Term Memory Method

Amanda Syifa Ariqoh1, Josyika Nisfullaili1, Nawang Putri Salsabila1, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Dana Prianjani, Industrial Engineering Department, Faculty of Industrial Technology, Universitas Islam Sultan Agung, Semarang, Indonesia

Wahyudi Sutopo, Yuniaristanto, University Centre of Excellence for Electrical Energy Storage Technology, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 526      Supply Chain Risk Management During the Covid-19 Pandemic Using a Quantitative Approach (Case Study: PT Aksara Solopos Newspaper)

Aditya Mahendra, Anisa Nur Maya D.R.H.H, and Rizky Ananda P.N.R., Industrial Engineering, Universitas Sebelas Maret,

Silvi Istiqomah, Industrial Engineering Department, Faculty of Engineering, Universitas Mahakarya Asia, DIY, Indonesia

Wahyudi Sutopo, University Centre of Excellence for Electrical Energy Storage Technology

Yuniaristanto, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 528      Determining Newspaper Distribution Routes Using Sweep Algorithm and Local Search to Solve the Capacitated Vehicle Routing Problem and Minimizing Cost

Imam Bagus Wibisono, Lsa Aldira Hafidza, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas, Sebelas Maret Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Isna Nugraha, Industrial Engineering Department, Faculty of Engineering, Universitas Pembangunan Nasional Veteran Jawa Timur, Surabaya, Indonesia

Wahyudi Sutopo, University Centre of Excellence for Electrical Energy Storage Technology, Industrial, Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Yuniaristanto, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering, Department, Faculty of Engineering
Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 529      Quality Control of Hot-Rolled Coil Production Process with Six Sigma Method in Hot Strip Mill Division of Steel Company

Arinda Soraya Putri, Husen Riza, Industrial Engineering Department, Faculty of Engineering, Universitas Muhammadiyah Surakarta, Jl. Ahmad Yani Tromol Pos 1, Surakarta, Indonesia

Agung Pamungkas, Master of Industrial Engineering Program, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 530      Enhancing the Effectivity and Efficiency of Production System using Discrete Event Simulation Approach (A Case Study in PT Solo Grafika Utama)

Dicka Korintus Kurnianto, Ferdinanda Pascha Hasian, Muhammad Abyan Naufal1, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Nancy Oktyajati, Industrial Engineering Department, Faculty of Engineering, Universitas Islam Batik Surakarta, Jl. Agus Salim No.10, Surakarta, Indonesia

Wahyudi Sutopo,University Centre of Excellence for Electrical Energy Storage Technology,

Yuniaristanto, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 531      Comparison of Trend Line Analysis Methods and Backpropagation Neural Network with Lowest Error Rate in Solopos Newspaper Industry

Alifah Rahmadiyani, Ferina Ruby Alfiyanti, Muhammad Dani Setiawan, Industrial Engineering, Universitas Sebelas Maret,

Silvi Istiqomah, Industrial Engineering Department, Faculty of Engineering, Universitas Mahakarya Asia, DIY, Indonesia

Wahyudi Sutopo, University Centre of Excellence for Electrical Energy Storage Technology

Yuniaristanto, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 532      Determining the Optimal Route for Newspaper Distribution by Using the Sweep Algorithm Method (Case Study: PT Aksara Solopos)

Arissa Dwi Pangestu, Azam Abdul Munib, Tiara Nur Fitri, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering., Universitas Sebelas Maret Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Nancy Oktyajati, Industrial Engineering Department, Faculty of Engineering, Universitas Islam Batik, Jawa Tengah, Surakarta, Indonesia

Wahyudi Sutopo, University Centre of Excellence for Electrical Energy Storage Technology,

Yuniaristanto, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 533      Determining Newspaper Distribution Routes using Cheapest Insertion Heuristic Algorithm with Sweep Clustering: A Case Study

Karel Gilang Nusantara, Nadia Alfi Nur Farikha, Tiffany Bella Nagari, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Nancy Oktyajati, Industrial Engineering Department, Faculty of Engineering, Universitas Islam Batik Surakarta, Jawa Tengah, Surakarta, Indonesia

Wahyudi Sutopo, University Centre of Excellence for Electrical Energy Storage Technology, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Yuniaristanto, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering
Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 534      Distribution Route Optimization of Newspaper Publishing Company with Saving Matrix Method and Milk-Run System

Adindha Karunia Ciptaning Pragowoaji, Iksan Widiantoro Restuaji, and Yusuf Fardhan Nurdianto, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami, 36A, Surakarta, Indonesia

Arinda Soraya Putri, Industrial Engineering Department, Faculty of Engineering, Universitas Muhammadiyah Surakarta, Jl. Ahmad Yani Tromol Pos 1, Pabelan, Kartasura, Surakarta, Indonesia

Wahyudi Sutopo, University Centre of Excellence for Electrical Energy Storage Technology, Universitas Sebelas Maret, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Yuniaristanto, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 535 Selection of the Best Forecasting Method for Newspaper Demand Based on Special Event (Case Study: PT. XYZ)

Eka Anasrul Hakim, Kyrie Anggito Munthe, Shafa Keysa Rinjani Hananta, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Nida An Khofiyah, Industrial Engineering Department, Faculty of Engineering, Universitas Pelita Bangsa, Cikarang, Indonesia

Wahyudi Sutopo, University Centre of Excellence for Electrical Energy Storage Technology, Universitas Sebelas Maret, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Yuniaristanto, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 536  Usability Study on the Online Retail Platform of Local Pharmacies in the Philippines

Michaella Alyssa T. Aquino, Leonard Rasell S. Manlapas, Ashley Marie N. Margate, Piolo Miguel B. Rivera, and Josephine D. German
School of Industrial Engineering and Engineering Management
Mapúa University, Intramuros, Manila, Philippines

ID 537 Implementation of the Trend Line Analysis Method on Newspaper Demand in the Digitalization Era: A Case Study

Hani Aninda Intan Permatasari, Muhammad Raihan Syaifudin, Safira Nariswari, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Nida An Khofiyah, Industrial Engineering Department, Faculty of Engineering, Pelita Bangsa University, Jl. Inspeksi Kalimalang Tegal Danas, Cikarang, Indonesia

Wahyudi Sutopo, University Centre of Excellence for Electrical Energy Storage Technology, Universitas Sebelas Maret, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Yuniaristanto, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

 ID 549 Determining Capacitated Vehicle Routing Problem Model
with Comparative Analysis of Sweep Algorithm and Heuristic Algorithm in Newspaper Company: A Case Study

Naufal Adi Wibowo, Rahma Sabilah Nurbi, Alifyan Arza, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Nida An Khofiyah, Industrial Engineering Department, Faculty of Engineering, Universitas Pelita Bangsa, Jl. Inspeksi Kalimalang Tegal Danas, Cikarang Pusat, Indonesia

Wahyudi Sutopo, University Centre of Excellence for Electrical Energy Storage Technology, Universitas Sebelas Maret, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Yuniaristanto, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 551      Determination of Distribution Routes with Joint Route Planning Using Differential Evolution Algorithm in the Newspaper Industry

Aldi Pascagama Nurracman, Muhammad Ilman Zidni, Rosifa Sahara Prasiwi, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Silvi Istiqomah, Industrial Engineering Department, Faculty of Engineering, Universitas Mahakarya Asia, Jawa Tengah, Surakarta, Indonesia

Wahyudi Sutopo3, Yuniaristanto4, 3) University Centre of Excellence for Electrical Energy Storage Technology, 4) Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

 ID 552      Supply Chain Network Model Development for Conversion Electric Motorcycle Distribution in Central Java using the Mixed Integer Linear Programming Method

Lsa Aldira Hafidza, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Silvi Istiqomah, Industrial Engineering Department, Faculty of Engineering, Universitas Mahakarya Asia, Yogyakarta, Indonesia

Wahyudi Sutopo3, Yuniaristanto4, 3) University Centre of Excellence for Electrical Energy Storage Technology, 4) Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 553      Supply Chain Risk Management in Newspaper Printing Using FMEA and FTA Methods (Case Study: PT. XYZ)

Aqshal Raffa Sandito1, Dina Nurfitri Rahma2, Niken Utami Tyastuti3, 1,2,3) Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Arinda Soraya Putri4, 4) Industrial Engineering Department, Faculty of Engineering, Universitas Muhammadiyah Surakarta, Jawa Tengah, Surakarta, Indonesia

Wahyudi Sutopo5, Yuniaristanto6, 5) University Centre of Excellence for Electrical Energy Storage Technology, 6) Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 554      A Manufacturer Opening Decision of Electric Motorcycle Conversion Kit Using the Mixed Integer Linear Programming Method

Tasya Santi Rahmawati, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Silvi Istiqomah, Industrial Engineering Department, Faculty of Engineering, Universitas Mahakarya Asia, Yogyakarta, Indonesia

Wahyudi Sutopo3, Yuniaristanto4, 3) University Centre of Excellence for Electrical Energy Storage Technology, 4) Research Group Industrial, Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

 ID 555      Development of Location-Allocation Model of Network Design for Battery Swapping Station and Battery Charging Station Facilities for E Trike and E-Motorcycle

Imam Bagus Wibisono, Undergraduate Program of Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia

Bekti Nugrahadi, Master Program of Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia

Wahyudi Sutopo3, Yuniaristanto4, 3) University Centre of Excellence for Electrical Energy Storage Technology, 4) Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 557      The Application of QFD and BMC for Furniture Development: A Case Study of Wickerwork Handicraft in Thailand

Rachan Pangprasret, Faculty of Industrial Technology Phranakhon Rajabhat University, Bangkok, Thailand

ID 558 The Application of QFD and BMC for Furniture Development: A Case Study of Wickerwork Handicraft in Thailand
Rachan Pangprasret, Faculty of Industrial Technology Phranakhon Rajabhat University, Bangkok, Thailand

ID 560      Development of Supply Chain Network Design Model for Commercialization of Batik Waste Processing Equipment with Credit System

Adindha Karunia Ciptaning Pragowoaji, Undergraduate Student of Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami, 36A, Surakarta, Indonesia

Nasyita Vivi Amalia, Industrial Engineering Department, Faculty of Engineering, Universitas Primagraha, Serang, Banten, Indonesia

Wahyudi Sutopo3, Yuniaristanto4, 3) University Centre of Excellence for Electrical Energy Storage Technology, 4) Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

ID 561      Comparative Study of Global Business Strategy: Lessons Learned from Excellent Sport-wear Companies (Nike and Adidas)

Almira Zana Pratama, Master Program of Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia

Wahyudi Sutopo, University Centre of Excellence for Electrical Energy Storage Technology, Universitas Sebelas Maret, Surakarta, Indonesia

Muhammad Hisjam, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia

Silvi Istiqomah, Industrial Engineering Department, Faculty of Engineering, Universitas Mahakarya Asia, Surakarta, Indonesia

 ID 562      Lesson Learned in Developing and Implementation a Global Business Strategy in Agriculture Companies: A Comparative Study

Andrian Listyo Kawuri, Master Program of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia

Wahyudi Sutopo, University Centre of Excellence for Electrical Energy Storage Technology, Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Muhammad Hisjam, Department of Industrial Engineering, Sebelas Maret University, Surakarta, 57126, Indonesia

Silvi Istiqomah, Industrial Engineering Department, Faculty of Engineering, Universitas Mahakarya Asia, Surakarta, Indonesia

ID 564      Commercializing a Technology use Global Business Strategy approach: A Lesson Learned from HVAC Companies

Dessy Srikandi, Master Program of Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia

Wahyudi Sutopo1,2, 1) University Centre of Excellence for Electrical Energy Storage Technology, 2) Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami 36 A, Surakarta, Indonesia

Muhammad Hisjam, Department of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia

Silvi Istiqomah, Department of Industrial Engineering, Faculty of Engineering, Universitas Mahakarya Asia, Surakarta, Indonesia

 ID 565      Lesson Learned a Global Business Strategy in Electronic Boook Reader: A Comparative Study

Alifah Dian Rahmania, Master Program of Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia

Wahyudi Sutopo1,2, 1) University Centre of Excellence for Electrical Energy Storage Technology, 2)Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Muhammad Hisjam, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia

Silvi Istiqomah, Industrial Engineering Department, Faculty of Engineering, Universitas Mahakarya Asia, Surakarta, Indonesia

ID 566      Developing a Business Strategy for the Recovery of Micro, Small, and Medium-sized Food Service Enterprises Affected by the COVID-19 Pandemic Using Structural Equation Modelling

Pauline Faye B. Peralta, Ma. Hannah Janelle E. Bernal, Ranna Jessica C. Diche, Angelie Anne R. La O, Carlos Ignacio Jr. P. Lugay, Joehanna K. Ngo, Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, España Blvd., Metro Manila, Philippines

ID 567      Musculoskeletal Disorders: Associated Risk Factors of the Laptop Usage Among Engineering Students in the University of Santo Tomas

Gracen R. Intia, Jasmin C. Lenon, Krista I. Mitra, Bianca A. Añonuevo, Nestor R. Ong, Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, Manila, Philippines

Yokogiru Aldwin Valentino, Simanjuntak  BINUS University, Indonesia

ID 569      An Evaluation on The Service Delivery Capacity of Engineering Educators from Selected Universities in the National Capital Region, During the COVID-19 Pandemic

Vien Ericka D. Medina, Marie Nanz S. Bacani, Iane Xavier E. Go, Kimberly E. Cruz, Joehanna K. Ngo, Ardvin Kester S. Ong, Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, España Blvd., Metro Manila, Philippines

ID 570      Stakeholder Perspective Analysis: Factors for Sustainable Policy Development

Girts Zarins, Scientific Assistant, Faculty of Engineering Economics and Management, Institute of the civil engineering and real estate economics

Riga Technical University, Latvia

Janis Zvirgzdins, Researcher, Faculty of Engineering Economics and Management, Institute of the Civil Engineering and Real Estate Economics, Riga Technical University, Latvia

Sanda Lapuke, Associate Professor, Faculty of Engineering Economics and Management, Institute of the Civil Engineering and Real Estate Economics Riga Technical University, Latvia

ID 571      Supply Chain Network Design Optimization Model for Determining the Location of The Facilitation Allocation for The Procurement of Machinery for Commodity Auctions in Magetan Regency

Maya Revanola Zainida, Department of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Indonesia

Wahyudi Sutopo1,2, 1) University Centre of Excellence for Electrical Energy Storage Technology, 2) Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Muhammad Hisjam, Laboratory of Logistics System and Business, Department of Industrial Engineering, Faculty of Engineering, Universitas, Sebelas Maret, Surakarta, Indonesia

Bobby Kurniawan, Departemen of Industrial Engineering, Univesitas Sultan Ageng Tirtayasa

 ID 572      Optimization Supply Chain Network Design for Bioreactor: A Case Study in Jakenan Pati

Bukhori Muslim1.2, 1) Master Program of Industrial Engineering Department, Faculty of Engineering, Sebelas Maret University, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia 57126, 2) Department of Trade and Industry, Government of Pati Regency, Central Java Province Jl. Raya Pati-Kudus No. Km. 4, Margorejo, Margorejo, Districts, Pati Regency, Central Java 59163

Wahyudi Sutopo1,2, 1) University Center of Excellence for Electrical Energy Storage Technology, 2) Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Sebelas Maret University, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Muhammad Hisjam, Laboratory of Logistics System and Business, Department of Industrial Engineering, Faculty of Engineering, Eleven Maret University, Surakarta, Indonesia

Bobby Kurniawan, Department of Industrial Engineering, University of Sultan Ageng Tirtayasa

 ID 573      How Social Support Affects Work-life Balance? A Post Covid-19 Pandemic Prediction

Enny Soeharto, Anita Maharani, Ratih Dewi Febrianti and Lenny Sri Wahyuni, Binus Business School, Master Program, Bina Nusantara University, Jakarta, Indonesia

ID 574      Supply Chain Network Design in Determining Location of Solar Powered Pest Control to Increase Harvesting Effectiveness of Rojolele Rice in Delanggu

Gilang Titah Ramadhan, Master Program of Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia

Wahyudi Sutopo1,2, 1) University Centre of Excellence for Electrical Energy Storage Technology, 2) Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Muhammad Hisjam, Laboratory of Logistics System and Business, Department of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia

Bobby Kurniawan3,4, 3) Laboratory of Mechatronics and System Modeling, 4) Department of Industrial Engineering, University of Sultan Ageng Tirtayasa

 ID 575      Supply Chain Network Design Integration Model for Opening-Closing Decision Allocation Terminal Salt Warehouse Facility

Hanif Sefa Al-Kautsar, Undergraduate Program in Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

Suryati, 1)Master Program of Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia 2)Department of Trade and Industry, Government of Pati Regency, Central Java Province, Jl. Raya Pati-Kudus No.Km. 4, Margorejo, Kec. Margorejo, Kabupaten Pati, Jawa Tengah 59163

Wahyudi Sutopo3, Yuniaristanto4, 3) University Centre of Excellence for Electrical Energy Storage Technology, 4) Research Group Industrial Engineering and Techno-Economic, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Jl. Ir. Sutami, 36 A, Surakarta, Indonesia

 ID 576      Design of a Supply Chain Network for Electricity Distribution Stations for Waste Treatment

Intan Pratiwi, Master Program of Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia

Wahyudi Sutopo, Professor, Department of Industrial Engineering, Past Head of Department of Industrial Engineering, Head of Industrial Engineering and Techno-Economics Research Group, Vice Dean for Human Resources, Finance, and Logistics, Faculty of Engineering, Universitas Sebelas Maret (UNS), Surakarta, Indonesia, President, IEOM Indonesia Chapter

Muhammad Hisjam, Industrial Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia

ID 577  Design of Philippine Public Health Services Information System to Improve the Department of Health’s COVID-19 Initiatives

Cheselle Jan Roldan, Victoria Estrella and Jeremy Elias, School of Industrial Engineering and Engineering Management Mapúa University

Intramuros, Manila, Philippines

Grace Lorraine D. Intal, School of Information Technology, Mapúa University, Intramuros, Manila, Philippines

ID 581      Analysis of Customer Characteristics for Customer Segmentation Classified by Share of Wallet: A Case Study of a Japanese Food Manufacturing Company

Yurina Oku, Ayuko Komura, and Hirohisa Hirai, Department of Industrial Engineering and Management, Kanagawa University, Kanagawa, Japan

ID 583      Performance Measurement of 3PL Service Providers for Online Retailers in the Philippines

Kirstien Paola E. Robas, Joyce Carol D. Valimento, and Josephine D. German, School of Industrial Engineering and Engineering Management Mapua University, Muralla St. Intramuros, Manila

 ID 584      The Current Issues and Factor Determinants of User Experience (UX) using Learning Tools

Yakob Utama Chandra, Yohannes Kurniawan, Yustinus Christian, Information Systems Departement, School of Information Systems, Bina Nusantara University, Palmerah, Jakarta, Indonesia 11480
Shamsul Arrieya Ariffin, Universiti Pendidikan Sultan Idris, Perak, Malaysia

 ID 585      Designing E-commerce Marketing Strategies for the Online Retail Industry: The Influence of Filipino Consumer Preference Towards Online Shopping

Martina L. Abgelina, Dann Johnzen B. Galang, Esteban Jose B. Pacada, Justin L. Seña, Joehanna K. Ngo, Ardvin Kester S. Ong, Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, España Blvd., Metro Manila, Philippines
Ardvin Kester S. Ong, School of Industrial Engineering and Engineering Management, Mapúa University, Manila, Philippines, 658 Muralla St., Intramuros, Manila 1002, Philippines

 ID 586      Factors that Influence Indonesian K-Pop Fans Willingness to Pay in Purchasing K-Pop Physical Album

Jessica Irena, Marchell A. Putera, Tifany, and Willy Gunadi, Business Management, Management Department, Binus Business School Master Program, Bina Nusantara University, Jakarta, Indonesia 11480

 ID 587      The Determinant Factors on Satisfaction, Loyalty, and Intention while Using Mobile Banking: A Systematic Literature Review

Aisah Wulandari, Putri Cantika Febrina, Yakob Utama Chandra
Information Systems Departement, School of Information Systems,
Bina Nusantara University, Palmerah, Jakarta, Indonesia 11480

 ID 588      Social Presence and Trusting Belief during Buyer-Seller Interaction in Electronic Marketplace

Evi Rinawati Simanjuntak, Faculty Member in Masters Management Program, Binus Business School, Bina Nusantara University, Jakarta, Indonesia

Javin Vinod Shahri, Alumni of Business Management and Marketing Program, Binus Business School, Bina Nusantara University, Jakarta, Indonesia

ID 590  Lecturer Analysis on the Implementation of MBKM Internship in the Construction & Infrastructure Industry at Faculty of Engineering and Computer Science of Narotama University

Julistyana Tistogondo, Diah Ayu Restuti Wulandari, Muhammad Ikhsan Setiawan; Sri Wiwoho Mudjanarko; Ronny Durrotun Nasihien and Adi Prawito, Department of Civil Engineering, Narotama University, Surabaya, Indonesia

Achmad Muchayan, Department of Information System, Narotama University, Surabaya, Indonesia

Tubagus Purworusmiardi, Department of Management, Narotama University, Surabaya, Indonesia

Haziman Wan Ibrahim, Department Civil Engineering UTHM, Malaysia

 ID 591      Digital Construction: Implementation & Impact of Mbkm Internship Civil Engineering Study Program in the Construction & Infrastructure Industry

Julistyana Tistogondo, Muhammad Ikhsan Setiawan, Sri Wiwoho Mudjanarko, Ronny Durrotun Nasihien, Diah Ayu Restuti Wulandari, Hendro Sutowijoyo and Farida Hardaningrum; Adi Prawito, Department of Civil Engineering, Narotama University, Surabaya, Indonesia

Achmad Muchayan, Department of System Information, Narotama University, Surabaya, Indonesia

Tubagus Purworusmiardi, Department of Management, Narotama University, Surabaya, Indonesia

Cholil Hasyim and Kuswanto, Darul Ulum University, Jombang, Indonesia

ID 600  Implementation & Impact Of MBKM Digital
Entrepreneurs Narotama University

I Nyoman Sudapet, Agus Sukoco, Elok Damayanti, I Putu Artaya, Ani Wulandari, Tubagus Purworusmiardi, Department of Management
Narotama University, Surabaya, Indonesia

Muhammad Ikhsan Setiawan and Sri Wiwoho Mudjanarko, DepartmentCivil Engineering, Narotama University, Surabaya, Indonesia

Achmad Muchayan, Information System Program Study, Narotama University, Surabaya, Indonesia

Achmad Muchayan, Information System Program Study, Narotama University, Surabaya, Indonesia

 ID 602      Push-Pull-Mooring, Perceived Risk and Consumer Mobility: Findings on Switching Behavior in Online Grocery Shopping during Large Scale Restriction in Covid-19 Pandemic Era

Evi Rinawati Simanjuntak, Faculty Member in master’s Management Program, Binus Business School, Bina Nusantara University, Jakarta, Indonesia

Matthew Abyra, Alumni of Business Management and Marketing Program, Binus Business School, Bina Nusantara University, Jakarta, Indonesia

ID 604      Comprehension-Based Ergonomic Redesign of Equipment Warning Signs in Philippines Manufacturing Industry

Pablo Mancia Jr. and Rex Aurelius C. Robielos, School of Graduate Studies, Mapua University, Intramuros, Manila, Philippines

ID 606      Application of Sustainable Value Stream Mapping in Office Furniture Production Line

Vilia Vianti Halim, Wilson Kosasih, Lithrone Laricha Salomon, Department of Industrial Engineering, Faculty of Engineering, Universitas, Tarumanagara Jl. S. Parman No 1, Jakarta, 11440, Indonesia

 ID 607 Examination Scheduling System for Mapua University

Bleyn Christian O. Servaz, John Joseph N. Pradas, John Emmanuel A. Sergio, Joel C. De Goma, and Sally I. Zara, School of Information Technology, Mapua University, Makati, Philippines

 ID 608      The Importance of Customer Focus for Organizational Performance: A Study Focus to an Information and Communication Technology Company based in Indonesia

Arif Setiyaji, Gertrudes Maria De Fatima Frans Alves, Lianna Wijaya, Management Department, Faculty of BINUS Online Learning, Bina Nusantara Universit

ID 611      Impact of Fiber Orientation on the Mechanical Properties of Rice Straw-Glass Fiber Reinforced Polymer Composites

Md. Ariful Alam, Md. Rafiquzzaman and Radwan Ahmed Rahat, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology, Khulna-9203, Bangladesh

ID 612      Food Company Industry Manager’s Perspective for Food Safety and Halal: Exploratory Study

Melati Kurniawati1,2, 1Department of Industrial and Systems Engineering, Institut Teknologi Sepuluh Nopember (ITS), Surabaya, Indonesia, 2Department of Industrial Engineering, Institut Teknologi Nasional Bandung (Itenas), Bandung, Indonesia

Patdono Suwignjo1, Iwan Vanany1, Bambang Syairudin1, 1Department of Industrial and Systems Engineering, Institut Teknologi Sepuluh Nopember (ITS), Surabaya, Indonesia

ID 614    Online Learning Experience of Malaysian University Students During Covid-19 Pandemic

Khairunesa Isa, Senior Lecturer of Social Science, Center for General Studies and Curriculum, Universiti Tun Hussein Onn Malaysia, Johor, Malaysia
Sarala Thulasi Palpanadan, Senior Lecturer of Language Studies, Centre for Language Studies, Universiti Tun Hussein Onn Malaysia, Johor, Malaysia
Nurliyana Md Rosni, Research Assistance of Social Science, Center for General Studies and Curriculum
Universiti Tun Hussein Onn Malaysia, Johor, Malaysia
Nor Shela Saleh, Jabatan Sains Sosial, Universiti Tun Hussein Onn Malaysia, 86400, Parit Raja, Batu Pahat, Johor, Malaysia
Mohd Shafie Rosli, School of Education, 81310 Universiti Teknologi Malaysia

ID 615      Building the Model for Detecting Different Types of Accounting Fraud in Japanese Companies

Natsuki Sato, Ayuko Komura, and Hirohisa Hirai, Department of Industrial Engineering and Management, Kanagawa University, Kanagawa, Japan

ID 616    Exploring the Risk Factors for Rear-End Collisions on Indonesian Toll Roads

Fatin Saffanah Didin, Ari Widyanti, Hardianto Iridiastadi, Industrial Engineering and Management Department, Institut Teknologi Bandung, Bandung, Indonesia

ID 617      Indonesia Digital Native Business Co-Branded Credit Card: Perceived Benefits Roles in the Formation of Continuous Intention-to-use

Agustinus Fedrian and David Hans Susanto, Creative Marketing Program, Management Department, Binus Business School Master Program, Bina Nusantara UniversityJakarta, Indonesia 11480

Willy Gunadi, Business Management, Management Department, Binus Business School Master Program, Bina Nusantara University, Jakarta, Indonesia 11480

ID 618      Transportation Performance Measurement for Coal Mining: A Review and Framework

Selamat Walmanto Hia, Moses Laksono Singgih, Raja Oloan Saut Gurning, Department of Management and Technology, Interdisciplinary School of Management and Technology, Institut Teknologi Sepuluh Nopember (ITS), Surabaya, Indonesia

ID 619      Factors of Behavioral Intention and Use Behavior on Mutual Fund Mobile Applications in Indonesia: A Systematic Literature Review

Sanah Saphira Putri, Adam Alhakim, Rani Nuraini, Yakob Utama Chandra, Information Systems Department, School of Information Systems, Bina Nusantara University, Jakarta, Indonesia 11480

ID 620      The United Nations Global Compact: An Institutional Approach for Environmental Principles based on Participants in Turkey

Tuğba Usta, Beykent University, Istanbul, Türkiye

Yıldız Yılmaz Güzey, Full Professor, Faculty of Economics and Business Administration Sciences, Business Administration (EN), Beykent University, Istanbul, Türkiye

 ID 621      Cluster-Based Colormap of Nanoindentation Using Machine Learning

Sarah Ghaleb Alhamdani, Abdallah Alrshdan and Khalid Ahmed College of Engineering, Alfaisal University, Riyadh, Saudi Arabia

ID 622      Feasibility Study and Planning New Factory Layout Using Systematic Layout Planning (SLP) Method for Smart Trolley

Jonathan Albert, Willy Harianto, Gabrielle Halim, and Geraldo Rafael, Lithrone Laricha, Salomon, Lina Gozali, Frans Jusuf Daywin, Helena Juliana Kristina, Andres, Industrial Engineering Department, Universitas Tarumanagara, Jakarta, Indonesia, 11440
Agustinus Purna Irawan, Harto Tanujaya, Mechanical Engineering Department, Universitas Tarumanagara, Jakarta, Indonesia, 11440.

ID 623      Review of MIWA Auto Component Cluster for Benchmarking and Modelling the AHP Problem

Anoop Pandey, Research Scholar, Department of Mechanical Engineering, Rajsthan Technical University Kota, Rajasthan, India

Dr. Rohitashwa Shringi, Professor in Mechanical Engineering, Rajsthan Technical University Kota, Rajasthan, India

ID 632    A Comparative Study between Linear and Non-linear Control of Induction Motor

Muhammet HAŞİMİ, Onur AKBATI, Department of Electrical and Electronics Engineering, Yildiz Technical University, Istanbul, Turkey

ID 635      Blending Optimization in Traditional Diesel Oil Production in Indonesia

Rois Fatoni, Heni Fidyayuningrum, Kun Harismah and A.M. Fuadi, Department of Chemical Engineering, Faculty of Engineering, Universitas Muhammadiyah Surakarta, Surakarta, Indonesia

ID 636      The Intention to Buy Europe Fashion Products Throught ECommerce

Celine Devina and Tantyo Yudistira, Business Management Program, Management Department, BINUS Business School Master Program, Bina Nusantara University, Jakarta, Indonesia 11480

Artha Sejati Ananda, Creative Marketing Program, Management Department, BINUS Business School Master Program, Bina Nusantara University, Jakarta, Indonesia 11480

ID 638      Design of Smart-Gate System for Monitoring Body Temperature Detection During the COVID-19 Pandemic

Rayan Eid Turki Alqadir and Abdulrahman Fayez Almutairi, Dept. of Electrical Engineering, Jouf University, Al-Jawf, Saudi Arabia

Nahar Alshammaria, Dept. of Electrical Engineering Faculty of Engineering, Jouf University, Al-Jawf, Saudi Arabia

Rabia Almamlook, Dept. of Industrial and Entrepreneurial Engineering and Engineering Management, Western Michigan University, USA, Al Zawiya University, Zawiya, Libya

ID 640      Determining the Factors Affecting the Acceptance of Systems Providing the Integration of Big Data Analysis and Mobil Applications: Enhanced Technology Acceptance Model

Yıldız Yılmaz Güzey, Professor of Business Administration (EN), Faculty of Economics and Administrative Sciences, Beykent University, Istanbul, Turkey
Öznur Dal, Istanbul, Turkey

ID 641      Productivity Improvement in Car Detailing Process at Java Detailing Workshop with Mepis Productivity Cycle

Alif Akbar Ramadhani, Student of Industrial and System Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

Patdono Suwignjo, Associate Professor in Industrial and System Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

Moses Laksono Singgih, Professor in Industrial and System Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

ID 642      Industry 4.0 Technologies for Sustainable Performance in Indian Manufacturing MSMEs

Darshan Pandya, Research Scholar, Operations Management, Indian Institute of Management Raipur, Raipur, India

Gopal Kumar, Associate Professor, Operations Management, Indian Institute of Management Raipur, Raipur, India

ID 643      Optimal Supply Chain Networks Under Failure Risks Using Meta-Heuristic Algorithms

Abdulhadi Altherwi, Department of Industrial Engineering, Jazan University, Jazan, Saudi Arabia

Daw Alwerfalli, A Leon Linton Department of Mechanical Engineering, Lawrence Technological University, Southfield, MI 48075, USA

William Edwards, Department of Industrial & Systems Engineering, Oakland University, Rochester, MI 48309, USA

 ID 644      Product Formulation of Instant Powder Functional Drink from Black Jelly Grass and Other Natural Ingredients

A.M. Fuadi, Hartini, Kun Harismah and Rois Fatoni, Department of Chemical Engineering, Faculty of Engineering, Universitas Muhammadiyah, Surakarta, Surakarta, Indonesia

ID 645      The Impact of Trust on Social Media Influencers on Customer Travel Decision Making

Vu Tuong Nguyen Le, English Program of Global Business, Chinese Culture University, Taipei, Taiwan

Ming Liu, Department and Graduate school of Tourism Management, Chinese Culture University, Taipei, Taiwan

ID 646      The Effect of Transformation Leadership on Small and Medium Enterprises Performance: The Mediation Roles of Employee Creativity and Organization Innovation

Duha Hashim Ali Alkhazraji and Prof. Dr. Wan Fauziah bt Wan Yusoff, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Johor, Malaysia

ID 647      The Impact of Transformation Leadership on the Performance of Small and Medium Enterprises in United Arab Emirates

Duha Hashim Ali Alkhazraji and Prof. Dr. Wan Fauziah bt Wan Yusoff, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Johor, Malaysia

ID 648      Saudia Dairy and Foodstuff Company (SADAFCO)’s Competitive Position

Esraa AlDabbagh and Lojien Jowharji, Master of Business Administration, Dar Al Hekma University, Jeddah, Saudi Arabia

Mostafa Fawzy, Management and Marketing Department, Dar Al Hekma University, Jeddah, Saudi Arabia

ID 651      Using Microsoft Power BI and Data Visualization Tools to Study How Online Shopping was Affected During COVID19 Period: A Comparison in Three Countries Between 2019 and 2020

Maryam Mohdsaeed Abdulla, Petroleum Engineer, QatarEnergy
Engineering Management Masters Student, College of Engineering
Qatar University, Doha, Qatar

Zahra Al-Ansari, Production Planning Engineer, Qatar Airways
Engineering Management Masters Student, College of Engineering
Qatar University, Doha, Qatar

Reem Baraka, Engineering Management Masters Student, College of Engineering, Qatar University, Doha, Qatar

Fatma Al-Muslamani, Engineering Management Masters Student, College of Engineering, Qatar University, Doha, Qatar

Murat Kucukvar, Associate Professor of Industrial System Engineering
College of Engineering, Qatar University, Doha, Qatar

ID 654      An Experimental Study: The Perception of The Availability of Facebook Pay as an Escrow Service and the Impact on Purchase Intention on Instagram

Siti Noviandini, Clark Immanuel, and Chairuddin Ahmad, Student of Magister Management, Program of Creative Marketing, Binus Business School Jakarta, Indonesia

Dr. Rini Setiowati, S.E., M.B.A, Lecturer of Magister Management, Program of Creative Marketing, Binus Business School, Jakarta, Indonesia

ID 656      Establishing Autonomy of House Ownership in Low-Income Society by Administering Money Saving

Kun Arsanti Dewi, Nurul Aini Sinta Dewi, Department of Housing and Settlement Areas, Magelang City, Magelang, Indonesia

Encep Rukhiyat Marsadi, Communities Care for Housing and Settlements in Indonesia, Bandung, Indonesia

Handini Rahayu, Development Planning Agency at Sub-National Level, Magelang City, Magelang, Indonesia

Suyamto, Residential area, BPR Bank Magelang, Magelang, Indonesia

Budiyono, Department of Public Works and Spatial Planning Magelang City, Magelang, Indonesia

ID 657      Analysis of Twitter social media on the Supporting Criteria of Largest Marketplace Customer Satisfaction in Indonesia

Muhammad Iqbal, Department of Technology Management, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

Mohammad Isa Irawan, Department of Mathematics, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

Rita Ambarwati Sukmono, Department of Management, Universitas Muhammadiyah Sidoarjo, Sidoarjo, Indonesia

ID 659      Evaluating Company X’s Product Mix and Product Size to Maximize Profit

Dr. Sobhi Mejjaouli, Alanoud AlSabhan, Haifa AlShathry, Rima AlEisa, Department of Industrial Engineering, Alfaisal University, Al Takhassousi, Al Zahrawi Street, Riyadh 11533

ID 660      The Future of Digital Procurement and its Benefits in The Global Supply Chain

Dadda Afaf, Ezzine Latifa, Full Professor of Industrial Engineering, ENSAM-Meknes School of Engineering, University Moulay Ismail, Morocco

Lebher Ikram, ENSAM-Meknes School of Engineering, University Moulay Ismail, Morocco

ID 664      Fourth Industrial Revolution (4IR) Technologies for Sustainable Development in Manufacturing Sector

Rabia Almamlook, Dept. of Industrial and Entrepreneurial Engineering and Engineering Management, Western Michigan University, USA, Assistant Professor of Aviation Engineering, Al Zawiya University, Zawiya, Libya

Omar Albalawi, Assistant Professor of Industrial Engineering, University of Tabuk, Tabuk, Saudi Arabia

Nahar Alshammaria, Dept. of Electrical Engineering Faculty of Engineering, Jouf University, Al-Jawf, Saudi Arabia

 ID 665      Machine Learning for Predictive Maintenance in the Manufacturing Sector

Rabia Almamlook, Dept. of Industrial and Entrepreneurial Engineering and Engineering Management, Western Michigan University, USA

Assistant Professor of Aviation Engineering, Al Zawiya University, Zawiya, Libya

Nahar Alshammaria, Dept. of Electrical Engineering Faculty of Engineering, Jouf University, Al-Jawf, Saudi Arabia

Omar Albalawi, Assistant Professor of Industrial Engineering, University of Tabuk, Tabuk, Saudi Arabia

ID 667      Perceived Ease of Use in Information Technology Acceptance Across Different Healthcare Systems – A Research Review

Tasfia Bari M.S., Doctoral Student, Eastern Michigan University, College of Technology, Ypsilanti, Michigan

Munther Abualkibash, Eastern Michigan University, College of Technology, School of Information Security and Applied Computing, Ypsilanti, Michigan

ID 668 The Influence of Various E-Learning techniques upon Technology Acceptance and student engagement in differing Classroom Environments – A Research Review
Tasfia Bari M.S., Doctoral Student, Eastern Michigan University, College of Technology, Ypsilanti, Michigan
Munther Abualkibash, Eastern Michigan University, College of Technology, School of Information Security and Applied Computing, Ypsilanti, Michigan

ID 670      TRIZ-ISHIKAWA diagram, a new tool for detecting influencing factors: a case study in HVAC business

Soumaya Elyoussoufi, Laboratory LM2I, department 2D2I, National school of Electricity and Mechanics (ENSEM), Hassan II University, Casablanca, Morocco

Mohamed Mazouzi, Laboratory LM2I, department 2D2I, National school of Electricity and Mechanics (ENSEM), Hassan II University, Casablanca, Morocco

Anass Cherrafi, ENSAM School, Moulay Ismail University

El Mehdi Tamasna, Laboratory LM2I, department 2D2I, National school of Electricity and Mechanics (ENSEM), Hassan II University, Casablanca, Morocco

 ID 671      Optimization of the Supply Chain System of a Food Factory

Mehmet Savsar, Üsküdar University, Faculty of Engineering and Natural Sciences, Department of Industrial Engineering, Istanbul, Turkey and
Kuwait University, College of Engineering & Petroleum, Department of Industrial & Management Systems Engineering, Kuwait

Mohamad J. Ben Salamah, Electric Power Department, The Higher Institute of Energy, The Public Authority for Applied Education and Training, Kuwait, KUWAIT.

 ID 673      Perceived Effect of Academic Stress to the Performance of Students during Online Class

Maria Angelica D. Bare, Francee Mae F. Castro, Jhon Lawrence G. Quimio, Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Muralla St. Intramuros, Manila

 ID 674      University Analysis on Digital Construction Program: Implementation & Impact of Mbkm Internship in Construction & Infrastructure Industry at Narotama University

Julistyana Tistogondo1, Farida Hardaningrum2, Muhammad Ikhsan Setiawan3, Sri Wiwoho Mudjanarko4, Diah Ayu Restuti Wulandari5, Ronny Durrotun Nasihien6, Hendro Sutowijoyo7, Adi Prawito8, Department of Civil Engineering, Narotama University, Surabaya, Indonesia

Achmad Muchayan1, Department of System Information, Narotama University, Surabaya, Indonesia

Tubagus Purworusmiardi1, Department of Management, Narotama University, Surabaya, Indonesia

Cholil Hasyim1 and Kuswanto2, Darul Ulum University, Jombang, Indonesia

ID 680  Evaluating the Benefits of Last-Mile Distribution with Light
Electric Vehicles (LEV): A Case Study

Sebastián Zazueta-Nassif, Roberto Galarza-Tamez and Vicente P. Montemayor-Villarreal, Industrial and Systems Engineering
Universidad de Monterrey, San Pedro Garza Garcia, Mexico

Jenny Díaz-Ramírez, School of Engineering and Technologies
Universidad de Monterrey, San Pedro Garza Garcia, Mexico

ID 695      Agent Based Modeling for Sustainable Urban Farming Incorporating Renewable Solar Energy and Impact on Food Security

Marwen Elkamel and Luis C. Rabelo, Industrial Engineering & Management Systems Department, University of Central Florida, Orlando, FL, USA

ID 697      Knowledge Management System Model for SMEs Community 

Inayatulloh, Information Systems Department, School of Information system, Bina Nusantara University, Jakarta, Indonesia 11480

Rozali Toyib, Universitas Muhammadiyah, Bengkulu, Indonesia

Maisyarah Rahmi Hasan, Islamic Economic Law Department Faculty of Sharia, Universitas Islam Negeri Sultan Aji Muhammad Idris Samarinda, Sugeng Riyanto, STIE Pertiwi, Bekasi, Indonesia

Sugeng Riyanto, STIE Pertiwi Bekasi , Indonesia

Enggal Sriwardiningsih, Management Department, Binus Business School, Bina Nusantara University, Jakarta, Indonesia,

Deny Jollyta, Institut Bisnis Dan Teknologi Pelita Indonesia

ID 698      Application of Machine Learning Techniques in Modelling Of Soaked and Unsoaked California Bearing Ratio

Akinwamide Joshua Tunbosun, Department of Civil Engineering, Faculty of Engineering, The Federal Polytechnic, Ado Ekiti, Ekiti State, Nigeria

Jacob Odeh Ehiorobo, Ph.D., Osuji Sylvester Obinna. Ph. D. and Ebuka Nwankwo. Ph.D., Department of Civil Engineering, Faculty of Engineering, University of Benin, Benin City, Edo State, Nigeria

 ID 699      Estimation of Compaction Characteristics Using Machine Learning Techniques

Akinwamide Joshua Tunbosun, Department of Civil Engineering, Faculty of Engineering, The Federal Polytechnic, Ado Ekiti, Ekiti State, Nigeria

Jacob Odeh Ehiorobo, Ph.D., Osuji Sylvester Obinna. Ph. D. and Ebuka Nwankwo. Ph.D., Department of Civil Engineering, Faculty of Engineering, University of Benin, Benin City, Edo State, Nigeria

ID 700      Analysis of Factors That Affect E-Commerce Technology Adoption for Msmes in Indonesia

Denisha Vanda Ersa Firsty, Muhammad Dachyar, Industrial Engineering, Faculty of Engineering, University of Indonesia, Depok, Indonesia 

ID 702      A Fuzzy Multicriteria Decision Making Approach for Lean Supplier Selection

Yıldız Şahin, Dr. of Industrial Engineering, Kocaeli University, Kocaeli, Turkey

Atik Kulaklı, Associate Professor of Management Information System, American University of the Middle East (AUM), Egaila, Kuwait

Semra Birgün, Full Professor of Industrial Engineering, Dogus University, Istanbul, Turkey

 ID 703      Mobile Commerce Model with Cloud Technology to Support SMEs Sales Performance   

Inayatulloh, Information Systems Department, School of Information system, Bina Nusantara University, Jakarta, Indonesia 11480

Rajiv Dharma Mangruwa, Communication and Business-Telkom University, Bandung, Indonesia, Azman Hashim International Business School, University of Technology Malaysia, Malaysia

Reni Nuraeni, Communication Studies Program, Faculty of Communication and Business, Telkom University

Prasetya Cahya S, Information Systems Department, School of Information system, Bina Nusantara University Jakarta, Indonesia 11480

Novingky Ferdinand, Sekolah Tinggi Ekonomi Bisnis Islam Syariah Bina Mandiri, Jakarta, Indonesia 11480

 ID 704      Development of Chatbot Application to Support Academic Staff Works for Academic Student Services

Yohannes Kurniawan, Devyano Luhukay, Yuliana Lisanti, Information Systems Department, School of Information Systems, Bina Nusantara University, Jakarta, Indonesia

 ID 705      Hybrid Learning Model for Elementary School in Pandemic  

Inyatulloh, Information Systems Department, School of Information system, Bina Nusantara University, Jakarta, Indonesia 11480

Siti Elda Hiererra, Information Systems Department, School of Information system, Bina Nusantara University, Jakarta, Indonesia 11480

Sugeng Riyanto, STIE Pertiwi, Bekasi, Indonesia

Destiana Kumala, Sekolah Tinggi Ekonomi Bisnis Islam Syariah Bina Mandiri, Jakarta, Indonesia 11480

Rivaldhy N. Muhammad, Study Program of Law, Faculty of Law, Social and Political Sciences, Open University,Indonesia

Rofiq Noorman Haryadi, Sekolah Tinggi Ekonomi Bisnis Islam Syariah Bina Mandiri, Jakarta, Indonesia

ID 708  The Role of Emotional Exhaustion in Understanding the Relationship Between Hybrid Work Characteristics and Innovative Work Behavior in Hybrid Working Arrangement

Dony Saputra, Management Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia

Amanda Puteri Rozyanti, Management Department, BINUS Business School Undergraduate Program, Bina Nusantara University,Jakarta, Indonesia

ID 709 Determination of Factors and Location of Wave Power Generating for Islands in Indonesia

Chabibi Nur Thahlil, Program Study Magister Management Technology, School of Interdisciplinary Management and Technology, Institut Teknologi Sepuluh Nopember,  Surabaya, Indonesia

Moses Laksono Singgih, Professor in Department of Industrial and Systems Engineering, Faculty of Industrial Technology and Systems Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

ID 710 Effects of Academic Workload to the Mental Fatigue of Students during Online Class

Madeline Anne Patrice C. Sy, Maryam G. Irenea, Frankern Luis S. Malabuyoc, Ma. Daniella M. Sobrevilla, Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Muralla St. Intramuros, Manila

ID 711 Customer Satisfaction as a Mediator (Intervening Variable) On the Effect of Product Quality and Service Quality on Customer Loyalty Sidjicoffee

Dewi Sekar Arum, Anita Silvianita, Mahendra Fakhri, Mahir Pradana, School of Communication and Business Telkom University

ID 712 The Influence of Price and Quality on Purchasing Decisions
for Luxcrime Products

Muthia Pramesty, Anita Silvianita, Mahendra Fakhri, Mahir Pradana, School of Communication and Business Telkom University

ID 713 The Influence of Intrinsic Factors And Prices On Impulse Buying Between Consumers On The Shopee Platform 

Risma Meylia Dinati, Mahendra Fakhri, Mahir Pradana, School of Communication and Business Telkom University

ID 714 The Effect of Service Quality on Customer Satisfaction and Customer Loyalty OVO E-Wallet Users

Theresia Bernadetha Nariyari, Mahendra Fakhri, Mahir Pradana, School of Communication and Business Telkom University

ID 716 Smart Preventive Maintenance- A Review

M.B. Kiran, Department of Mechanical Engineering, School of Technology, Pandit Deendayal Energy University, Gandhinagar, Gujarat, India

ID 717 The Mediating Effect of Financial Management on Financial Attitude and Financial Satisfaction of Indonesian Young Adults

Farizka Shafa Nabila, Mahendra Fakhri, Mahir Pradana, School of Communication and Business Telkom University

ID 718  How Scarcity and Perceived Value Affecting Impulse Buying Among Customer During Covid-19

Hanifah Putri Elisa, Mahendra Fakhri, Mahir Pradana, School of Communication and Business Telkom University

ID 726 A Study on the Assessment of VetConnect using   SWOT Analysis and Six Thinking Hats 

Daniele De Guzman, Samuel Mirasol, King Perez, Grace Lorraine Intal, School of Information Technology, Mapua University Makati, Philippines

ID 728 Technology Acceptance Model for Resistance Implementation Mobile Learning in Higher education

Inayatulloh, Information Systems Department, School of  Information system, Bina Nusantara University Jakarta, Indonesia 11480

Deny Jollyta, Institut Bisnis Dan Teknologi Pelita Indonesia

Rajiv Dharma Mangruwa, Communication and Business-Telkom University, Bandung, Indonesia, Azman Hashim International Business School – of Technology Malaysia , Malaysia

Maisyarah Rahmi Hasan, Islamic Economic Law Department Faculty of Sharia, Universitas Islam Negeri Sultan Aji Muhammad Idris Samarinda

Sawqi Saad El Hasan, Sekolah Tinggi Ekonomi Bisnis Islam Syariah Bina Mandiri, Bogor, Indonesia 11480

Indra Kusumadi Hartono, Information Systems Department, Bina Nusantara University,Jakarta, Indonesia 11480

ID 729 E-learning Model for Blind Disabilities with Text to Speech using NLP

Inayatulloh, Information Systems Department, School of  Information system, Bina Nusantara University Jakarta, Indonesia 11480

Ade Fadli Fachrul,  Dirosat Islamiyah High School of Da’wah  Al Hikmah, Jakarta, Indonesia

Sugeng Riyanto, STIE Pertiwi, Bekasi , Indonesia

Rozali Toyib, Universitas Muhammadiyah, Bengkulu, Indonesia

Rivaldhy N. Muhammad, Study Program of Law, Faculty of Law, Social and Political Sciences, Open University, Indonesia

Elvia Puspa Dewi, STIE IGI, Jakarta, Indonesia

ID 730 The influence of rooftop agriculture on urban food security
in South Africa

Kiara Lawrence, Human Sciences Research Council Intern, University of Johannesburg, Department of Urban and Regional planning, Office 6062, Sixth Floor, John Orr Building, Beit and Siemert Street, 2028. Johannesburg, South Africa

Trynos Gumbo, Head of Department and Associate Professor, University of Johannesburg, Department of Urban and Regional planning, Office 6062, Sixth Floor, John Orr Building, Beit and Siemert Street, 2028. Johannesburg, South Africa 

Zaakirah Jeeva, Post-Doctoral Research Fellow, Unit of Environmental science and Management, North-West University, Potchefstroom,2520.

ID 731 The role of rooftop agriculture on urban food security: A case study on the Priority Zone Rooftop Garden

Kiara Lawrence, Human Sciences Research Council Intern, University of Johannesburg, Department of Urban and Regional planning, Office 6062, Sixth Floor, John Orr Building, Beit and Siemert Street, 2028. Johannesburg, South Africa

Trynos Gumbo, Head of Department Associate Professor, University of Johannesburg, Department of Urban and Regional planning, Office 6062, Sixth Floor, John Orr Building, Beit and Siemert Street, 2028. Johannesburg, South Africa

Zaakirah Jeeva, Post-Doctoral Research Fellow, Unit of Environmental science and Management, North-West University, Potchefstroom,2520.

ID 733 Improving Sustainability of Orange Supply Chain:  A System Dynamics Model to Eliminating Pre-Harvesting Loss, Increase Workers, to Improve Farmer’s Profit

Emad Alzubi and Bernd Noche, Transportsysteme und -logistik, Fakultätsingenieurswissenschaften, Universität Duisburg – Essen , Keetmanstr. 3-9, 47058 Duisburg, Germany

ID 735 HOW IMPORTANT IS BUSINESS ETHICS IN CORPORATE STRATEGY

Chairul Iksan Burhanuddin, Aulia, Alamsjah, Firmansyah, University of Muhammadiyah Makassar

ID 738 STRATEGIES FOR DEVELOPING MEDICAL WASTE MANAGEMENT INTERVENTIONS IN VARIOUS COUNTRIES: SYSTEMATIC REVIEW

Levi Anatolia SM Exposto and I Made Ady Wirawan, Udayana University, Denpasar Bali Indonesia

ID 742 INDONESIA-SINGAPORE COOPERATION WITH JEWELRY EXPORT COMMODITIES THROUGH THE ROLE OF THE ASEAN FREE TRADE AREA (AFTA) IN 2015-2018

Irma Indrayani, Lecture of International Relations Department, Faculty of Social and Political Sciences, Universitas Nasional, Jakarta, Indonesia

Edo Afriandi, Student of International Relations Department
Faculty of Social and Political Sciences, Universitas Nasional, Jakarta, Indonesia

ID 747 MAKING GLOBAL MARITIME FULCRUM RELEVANT: EFFORTS TO INCREASE INDONESIAN TUNA EXPORT TO JAPAN 

Tofan Dwi Kartiko and Tirta Nugraha Mursitama, Department of International Relations, Faculty of Humanities, Bina Nusantara University, Jakarta, Indonesia

ID 748 EFFECT OF PRODUCT RATING AND PRODUCT SOLD ON PURCHASE INTENTION, CONSUMER CONFIDENCE, AND PERCEIVED RISK IN ONLINE MARKETPLACE   

Rahmatiar Chandra Rachim, Master of Management in Business Management, BINUS Business School, BINUS University, Jakarta, Indonesia

Yokogiru A.V. Simanjuntak, Master of Management in Business Management, BINUS Business School, BINUS University, Jakarta, Indonesia

Primidya K. Miranda Soesilo, Head of Business Management and Marketing, Program, BINUS Business School, BINUS University, Jakarta, Indonesia

ID 753 GEO-CHEMICAL CHARACTERISATION OF EKITI STATE SOILS: IMPLICATION FOR ROAD WORKS

Akinwamide Joshua Tunbosun, Department of Civil Engineering, Faculty of Engineering, The Federal Polytechnic, Ado Ekiti, Ekiti State, Nigeria

 Jacob Odeh Ehiorobo, Ph.D.  Osuji Sylvester Obinna. Ph. D. and Ebuka Nwankwo. Ph.D. Department of Civil Engineering, Faculty of Engineering, University of Benin, Benin City, Edo State, Nigeria

 ID 754 APPLICATION OF MACHINE LEARNING TECHNIQUES TO PREDICT SOME GEOTECHNICAL INDICES IN EKITI STATE, SOUTHWESTERN NIGERIA

Akinwamide Joshua Tunbosun, Department of Civil Engineering, Faculty of Engineering, The Federal Polytechnic, Ado Ekiti, Ekiti State, Nigeria

Jacob Odeh Ehiorobo, Ph.D. Osuji Sylvester Obinna. Ph. D. and Ebuka Nwankwo. Ph.D. Department of Civil Engineering, Faculty of Engineering, University of Benin, Benin City, Edo State, Nigeria 

ID 756 Implementing Deep Learning in E-Commerce Platforms for Fraud Detection and Management

Mary Jane C. Samonte, School of Information Technology, Mapúa University
Elcid A. Serrano, School of Information Technology, Mapúa University
Joseph Anthony T. Arpilleda, Robert Leyton-Pete J. Pastrana, Dhan L. Quijano, Romeo Robert R. Sulit, School of Information Technology, Mapúa University 

ID 757 Deep Learning in Traffic Flow Control and Prediction for Traffic Management  

Mary Jane C. Samonte, Doctor of Information Technology, Faculty Member of School of Information Technology, Mapua University, Makati City, Philippines 

Gian Andre F. Balan, Paolo P. Gaviño, Justin Angelo S. Monasterial,
Rafael Antonio C. Reforsado, Danielle C. Samonte, School of Information Technology, Mapua University, Makati City, Philippines 

ID 758 Using Deep Learning in Sign Language Translation to Text

Mary Jane C. Samonte, Doctor of Information Technology, Faculty Member of School of Information Technology, Mapua University, Makati City, Philippines

Carl Jose M. Guingab, Ron Andrew Relayo, Mark Joseph C. Sheng, John Ray D. Tamayo, School of Information Technology, Mapua University, Makati City, Philippines

ID 759 The Characteristics and Functions of Public Spaces in Gated Communities: Learning from Irene Farm Villages Estate Gated Community

Silindile Zulu, Department of Urban and Regional Planning, University of Johannesburg, Johannesburg, South Africa

Trynos Gumbo, Head of Department and Associate Professor, University of Johannesburg, Department of Urban and Regional planning, Office 6062, Sixth Floor, John Orr Building, Beit and Siemert Street, 2028. Johannesburg, South Africa

Walter Musakwa, Associate Professor, Department of Urban and Regional planning, University of Johannesburg, Johannesburg, South Africa

ID 769 Cost Integrated Safety Management for Accident Risk Control in Cement Manufacturing Process

Afrigh Fajar Rosyidiin, Patdono Suwignjo, Moses Laksono Singgih,  Department of Industrial and Systems Engineering, Institut Teknologi Sepuluh Nopember ITS Campus, Keputih-Sukolilo, Surabaya-Indonesia

ID 770 Critical Success Factors in Construction Related Projects in Oman

Nasr Al-Hinai, Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, Muscat, Oman

Maryam Mohammed Masudur Rahman, Department of Operation Management & Business Statics, College of Economics and Political Science, Sultan Qaboos University, Muscat, Oman

Sujan Piya, Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, Muscat, Oman

ID 771 Focused Sampling Orientation: Strategy for Quality Assurance in Company XYZ  

Jhamela Mae Gutierrez and Jenalyn Shigella G. Yandug, School of Industrial Engineering and Engineering Management, Mapua University, 658 Muralla St, Intramuros, Manila

ID 772 Website Design of West Corner Hotel to Improve Service Operations

Milstein Rei Cadorniga, Ashly Mariel Cruz, Coleen Dela Cruz, Grace Lorraine Intal, School of Information Technology, Mapúa University, Makati Philippines

ID 773 Exploring and Evaluating the Impact of COVID-19 on Mobility Changes in Singapore

 Aldy Gunawan, Tran Linh Chi, Kar Way Tan, School of Computing and Information Systems, Singapore Management University, Singapore

Wang I-Lin, Department of Industrial and Information Management, National Cheng Kung, University, Tainan , Taiwan, 701

ID 774 Optimizing of Series systems with identical components and imperfect Repairs

MOHAMMED A. HAJEEH, Techno-Economics Division, Kuwait Institute for Scientific Research P.O. Box 24885; Safat-13109, KUWAIT

ID 777 A Structured Method for Requirements Analysis with Application to CFR-14 Part-21 Subpart-G

Dr.Anjali Awasthi, Professor and CURC- II, Gina Cody school of engineering and computer science, Concordia University
Montreal, Canada

Mr. Seyed Ali Gamarooni Pour, MASc in Quality Systems Engineering
Gina Cody school of engineering and computer science, Concordia University, Montreal, Canada

ID 779 Business Process Re-engineering of KE and ES Marketing Sales and Distribution Process utilizing S4 Hana

Daniele De Guzman, Romulo Fronda Jr., Samuel Mirasol, King Perez, Grace Lorraine Intal, School of Information Technology, Mapua University Makati, Philippines

ID 780 Diagnosis of Teacher Assessment Literacy in  National High School Equivalency Examination Non formal Education

Daddy Darmawan1, Adi Irvansyah2, Pendidikan Masyarakat, Universitas Negeri Jakarta

Rahmat Syah3, STABN Sriwijaya, Universitas Negeri Jakarta

ID 781 Manifesting the Tough Teachers on The Implementation of ABCD5E Model Learning During the Covid 19 Pandemic Through The Partnership Program

Sri Wiji Handayani, A Student of The Early Childhood Teacher Education Department Faculty Of Education, Pascasarjana Universitas Negeri Semarang

Lita Latiana and Yuli Kurniawati Sugiyono Pranoto, Lecture at the early childhood Teacher Education Department Faculty of Education, Universitas Negeri Semarang

ID 782 Students’ Perception of Online Discussion During the Covid-19 Pandemic 

Ghina Aulia Abidin and Ali Mustadi, Faculty of Education, Yogyakarta State University, Yogyakarta, Indonesia

Heri Retnawati, Faculty of Mathematics and Natural Science, Yogyakarta State University Yogyakarta, Indonesia

ID 783 Acid-Base Indicator Paper Extracted from Rose (Rosa damascena Mill) and Asoka Flower (Ixora occinea Linn) Ethanols

Riyanti Riyanti, Senior High School 1 Bangsri, Jepara, Central Jawa, Indonesia

Putut Marwoto, Edy Cahyono , Retno Sri Iswari, Sri Haryani, Budi Naini Mindyarto,Postgraduate School of Science Doctorate Program, Universitas Negeri Semarang, Indonesia

ID 784 Development of Augmented Reality Assisted Textbooks to Develop Patriotism Character for Students of Grade 4th in Elementary School

Anggri Laisaroh, Graduate Program, Yogyakarta State University, Jl. Colombo Yogyakarta No.1, Karang Malang, Caturtunggal, Kec. Depok, Kabupaten Sleman, Daerah Istimewa Yogyakarta 55281

E.Kus Eddy Sartono, Graduate Program, Yogyakarta State University, Jl. Colombo Yogyakarta No.1, Karang Malang, Caturtunggal, Kec. Depok, Kabupaten Sleman, Daerah Istimewa Yogyakarta 55281

ID 785 The Model and Management of Surau Based Education Expected by People of Minangkabau in Facing the Globalization Era

Syafruddin Wahid, Solfema Solfema, Alim Harun Pamungkas, Wendi Ahmad Wahyudi, Nurul Hayati, Non-Formal Education Department Faculty of Education, Universitas Negeri Padang, Jl. Prof. Dr. Hamka, Air Tawar Barat, Padang Utara, Kota Padang, Sumatera Barat 25171, Indonesia

ID 786 Quality Assurance Management Model for Improving Online Learning in Accounting Major

Adelina Mariani Simatupang , Student of Faculty of Education, Universitas Negeri Semarang, Indonesia

Joko Widodo, Faculty of Economy, Universitas Negeri Semarang, Indonesia

Sri Sularti Dewanti Handayani, Tri Joko Raharjo, Faculty of Education, Universitas Negeri Semarang, Indonesia

Rodiyah Rodiyah, Faculty of Law, Universitas Negeri Semarang, Indonesia 

ID 787 Link and Match Program between Course and Training Agency with Industry to Increase Working Opportunities for People with Disabilities

Alim Harun Pamungkas, Vevi Sunarti, Fitri Dwi Arini, Zahratul Azizah, Department of Non-Formal Education, Faculty of Education, Universitas Negeri Padang, Jalan Prof. Dr. Hamka, Air Tawar, Padang, West Sumatra, Indonesia

ID 789 Indonesia’s Readiness to Implement Agriculture Data Analytic – Based Smart Village
Eneng Tita Tosida, Department of Computer Science, IPB University, Indonesia, Department of Computer Science, Universitas Pakuan, Indonesia

Yeni Herdiyeni, Department of Computer Science, IPB University, Indonesia

Marimin, Department of Industrial Technology, IPB University, Indonesia

Suprehatin, Department of Agribusiness, IPB University, Indonesia

ID 790 Tourism 4.0 Trend
I Nyoman Sudapet, Agus Sukoco, Elok Damayanti, Ani Wulandari and Amrun Rosyid, Department of Management, Narotama University, Surabaya, Indonesia
Ronny Durrotun Nasihien and Muhammad Ikhsan Setiawan, Department of Civil Engineering, Narotama University, Surabaya, Indonesia
Che Zalina Zulkifli, Faculty of Arts, Computing and Creative Industry, Sultan Idris Education University, Malaysia
Muhammad Isradi, Department of Civil Engineering, Universitas Mercu Buana, Jakarta, Indonesia
Paisal Halim and Syamsiah Badruddin, Universitas Nasional, Jakarta, Indonesia

ID 791 Transportation 4.0 Trend 
Muhammad Ikhsan Setiawan and Ronny Durrotun Nasihien, Department of Civil Engineering, Narotama University, Surabaya, Indonesia
Agus Sukoco and Amrun Rosyid, Department of Management, Narotama University, Surabaya, Indonesia
Mohd Adib Mohd Razi, Department of Civil Engineering, Universiti Tun Hussein Onn Malaysia, Malaysia
Muhammad Isradi, Department of Civil Engineering, Universitas Mercu Buana, Jakarta, Indonesia
Paisal Halim and Syamsiah Badruddin, Universitas Nasional, Jakarta, Indonesia

ID 792  Rural 4.0 Research Trend
I Nyoman Sudapet, Agus Sukoco, Elok Damayanti, Ani Wulandari and Amrun Rosyid, Department of Management, Narotama University, Surabaya, Indonesia
Ronny Durrotun Nasihien and Muhammad Ikhsan Setiawan, Department of Civil Engineering, Narotama University, Surabaya, Indonesia
Mohd Idrus Mohd Masirin, Department of Civil Engineering, Universiti Tun Hussein Onn Malaysia, Malaysia
Muhammad Isradi, Department of Civil Engineering, Universitas Mercu Buana, Jakarta, Indonesia
Paisal Halim and Syamsiah Badruddin, Universitas Nasional, Jakarta, Indonesia

ID 793 Cities 4.0 Research Trend
Muhammad Ikhsan Setiawan and Ronny Durrotun Nasihien, Department of Civil Engineering, Narotama University, Surabaya, Indonesia
Agus Sukoco, Firman Aditya and Amrun Rosyid, Department of Management, Narotama University, Surabaya, Indonesia
Che Zalina Zulkifli, Faculty of Arts, Computing and Creative Industry, Sultan Idris Education University, Malaysia
Muhammad Isradi, Department of Civil Engineering, Universitas Mercu Buana, Jakarta, Indonesia

ID 796 Systematic Literature Review of the Impact of State Budget Cuts on Public Higher Education Institutions in the U.S.

Praveen Kumar Guraja, Assistant Professor of Information Technology Management, Faculty of Coleman College of Business, University of Pikeville, Pikeville, KY 41501, USA

M.Affan Badar and Farman A. Moayed, Professors of College of Technology, Indiana State University, Terre Haute, IN 47809, USA

Christopher J. Kluse, Associate Professor of Quality Systems, Faculty of College of Technology, Architecture and Applied Engineering, Bowling Green State University, Bowling Green, OH 43403 USA

ID 798 The Mediating Role of Work Engagement and Job Autonomy in the relationship between Transformational Leadership, Organization Support and Employee Performance in Mining Companies in Indonesia
Tomy Junaedy and Novriyadi, Nur Damayanti and Agustian Budi Prasetya, Graduate Students in Management, Bina Nusantara Business School, Bina Nusantara University, Jakarta, Indonesia

ID 799  Mamamayan: An Android mobile Community-based Emergency Reporting and Notification System  

William P. Rey, Sydney Alison S. Adalin, Khristopher Ross L. Calanog, and Gian Windsor R. Jimenez, School of Information Technology, Mapua University, Makati, Philippines

ID 803 Analyzing Online and Conventional Transportation Policy: The Case of South Tangerang City of Indonesia

Retnowati Wahyuning Dyas Tuti, Department of Public Administration, University of Muhammadiyah Jakarta, South Tangerang, Indonesia

Asep Setiawan, Head of Master Program in Political Science, University of Muhammadiyah Jakarta, South Tangerang, Indonesia

Winda Dwi Astuti Zebua, Department of Communication, University of Muhammadiyah Jakarta, South Tangerang, Indonesia

Devia Andiani, Department of Public Administration, University of Muhammadiyah Jakarta, South Tangerang, Indonesia

ID 817 The Influence of Public Opinion on Indonesia’s Foreign Policy-Making Process: A Case Study of the Jakarta Bandung High-Speed Rail Project 2008-2015

Farid Ramadhony, Fakultas Ilmu Sosial dan Ilmu Politik, Universitas Prof. DR. Moestopo (Beragama), Jakarta, Indonesia

ID 819 Business Process Reengineering of the Purchasing department of Lezzon Philippines Inc using ERP System

Chloe Ysabel P. Zerrudo, Christian Ross Abayle, Lew Carmelino, Roland Jay-Ar R. Espinosa, Rambert Ginez and Grace Lorraine D. Intal, School of Information Technology Mapua University, Manila Philippines

ID 820 Application Internet of Things (IoT)  in Healthcare to optimize waiting time using the Business Process Reengineering (BPR) Approach

Mutia Perwita Sari, Novandra Rhezza Pratama, M.Dachyar, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

ID 828 Tool Condition Monitoring-A Review

MB. Kiran, Department of Mechanical Engineering, School of Technology, Pandit Deendayal Energy University, Gandhinagar, Gujarat, India

ID  829  Cost Integration Value Stream Approach To Eliminate Waste In Crankcase Production Line

Imam Rendi Pratama, Program Study Magister Management Technology, School of Interdisciplinary Management and Technology, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

Moses Laksono Singgih, Professor in Department of Industrial and Systems Engineering, Faculty of Industrial Technology and Systems Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia 

ID  830 A Structural Equation Model on Relationship Between Workers’ Performance and Their Five Factor Personality in The Case of Downward Social Comparison

Yanwen Dong, Cluster of Science and Technology, Fukushima University, Fukushima city, Japan

Jiali Du, Graduate School of Symbiotic Systems Sciences and Technology, Fukushima University, Fukushima city, Japan

ID  831 The Economics of Energy Label in The Consumer Market in Malaysia

Mahirah Kamaludin and Muhd Azrin Shah, Faculty of Business, Economics and Social Development, Universiti Malaysia Terengganu, 21030 Kuala Nerus, Terengganu, Malaysia

ID  832  Determination of Optimal Control policy for a Stochastic Production-inventory Model in Segmented Market

Sunita Mehta, Department of Mathematics, AIAS, Amity University, Noida, U.P.-201301, India

Shivani Bali,  Jaipuria Institute of Management, Noida, Uttar Pradesh-201309, India

Kuldeep Chaudhary*, Department of Mathematics, AIAS, Amity University, Noida, U.P.-201301, India

ID 834  The Effect of Individual Entrepreneurial Orientation and Self-Efficacy on Students’ Entrepreneurial Intention: A Conceptual Framework

Khaled Mohamed Alfzari, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat,Johor.

Khadijah Md Ariffin2, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor

ID 835 Employing Smart Pre -screening Technology in Recruiting Sales Interns in the IT industry of Sri Lanka

Thivvyan Karuneswaran1, Informatics Institute of Technology,  Colombo, Sri Lanka
Gayashini Shyanka Ratnayake2, Informatics Institute of Technology,  Colombo, Sri Lanka

ID 837 The Effect Of Emotional Support and Informational Support On The Need For Relatedness and User’s Satisfaction With The Use Of Social Media

Ridani Faulika Santalia, Creative Marketing Program, Business Management Department, Binus Business School Master Program, Bina Nusantara University, Jakarta, Indonesia 11480

Willy Gunadi, Binus Management Program, Binus Business School Master Program, Bina Nusantara university, Jakarta, Indonesia 11480

Ario Setiadi, Binus Management Program, Binus Business School Master Program, Bina Nusantara University, Jakarta, Indonesia

ID  838  Special Economic Zones (SEZs) Establishments: Lessons from International experiences for South Africa

Chukwuemeka Ezenwa Osuigwe, Department of Town and Regional planning, Office 6062, Sixth Floor, John Orr Building, Beit and Siemert Street, 2028. Johannesburg, South Africa

Professor Trynos Gumbo, University of Johannesburg, Department of Town and Regional planning, Office 6062, Sixth Floor, John Orr Building, Beit and Siemert Street, 2028. Johannesburg, South Africa

Professor Clinton Aigbavboa, University of Johannesburg, Department of Construction Management and Quantity Surveying, House No 6, Research Village, Bunting Road Campus. Johannesburg, South Africa

ID  839 Checklist of Ergonomic Risks of Teleworking after COVID -19

Zarail Hernández Sanabria and Jannette Pérez Barbosa, Department of Engineering, Universidad Ana G. Méndez, Gurabo, Puerto Rico 00778, USA 

ID  840  Service Recovery in Online Travel Agencies During COVID-19 Pandemic

Marcella Stephanie Lawu, Imam Santoso, Raden Mas Asbudiutomo, and Willy Gunadi, Binus Business School Master Program, Faculty of Business Management, Bina Nusantara University, Jakarta, Indonesia

ID  841  Investigating the Innovativeness of Public Transport Systems: the Case of Tshwane Rapid Transit (TRT) ‘A Re Yeng’

Mpho Langa, Master’s Degree Student at the University of Johannesburg, Department of Urban and Regional Planning,

E.N Makoni, University of Johannesburg, Department of Urban  and Regional planning, Office 6062, Sixth Floor, John Orr Building, Beit and Siemert Street, 2028. Johannesburg, South Africa

Trynos Gumbo, University of Johannesburg, Department of Urban  and Regional planning, Office 6062, Sixth Floor, John Orr Building, Beit and Siemert Street, 2028. Johannesburg, South Africa

ID 843  A Study on the Assessment of E-Commerce Application: Home Buddies using SWOT Analysis

Coleen M. Dela Cruz, School of Information Technology, Mapua University, Manila City
Patrick Watson, School of Information Technology, Mapua University, Manila City
Grace Lorraine D. Intal, School of Information Technology, Mapua University, Manila City

ID  844  The Role of Digital Customer Experience and Relationship Quality to Customer Loyalty in Food Delivery Application

Asnan Furinto,  Doctoral Research Management, Bina Nusantara University. Jalan Hang Lekir I no 6, Jakarta 10270,

Dewi Tamara, Eva Lie Hwa, Evy Evianti Kriswandi, Hamina Ali, Executive in Strategic Management, Bina Nusantara University, Jalan Hang Lekir I no 6, Jakarta 10270, Indonesia 

ID  846  Robotic Process Automation: A literature review on quantitative benefits

Serap Ulusam Seçkiner, Full Professor of Industrial Engineering, Faculty of Engineering and Natural Sciences, Gaziantep University, Gaziantep, Turkey

Mohammed Alfandi, PhD student in Industrial Engineering, Faculty of Engineering and Natural Sciences, Gaziantep University, Gaziantep, Turkey

 ID  847  Evaluating Usability of a Learning Management System with a Real Life Case Study at an Academic Department

Adil Baykasoglu, Burcu Felekoglu and Ceylin Unal, Department of Industrial Engineering, Dokuz Eylül University, Izmir, Turkey

ID  848  Investigating the challenges and factors influencing  Project Success during the Covid-19 pandemic in Oman

Afnan AL-Saddi, BSc Industrial Engineering student, Sultan Qaboos University, Muscat, Oman

Laila AL-Jahwari, BSc Mechanical Engineering student, Sultan Qaboos University, Muscat, Oman

Nasr Al Hinai, Nasr Al-Hinai, PhD, Associate Professor and HoD
TJER Associate Editor, Department of Mechanical & Industrial Engineering
College of Engineering Sultan Qaboos University, Muscat, Oman

Sujan Piye, PhD, Associate Professor, Department of Mechanical & Industrial Engineering, College of Engineering Sultan Qaboos University
Muscat, Oman

ID 849 The Impact of User Experience on social media to communicate in relation to the other ethnic: A Field Experiment UiTM Student

Agus Masrukhin, Character Building Development Center, Information Systems Department, School of Information Systems, Bina Nusantara University, Jakarta, Indonesia 

ID  850  Application of the SMED method to increase the efficiency of the sealing process in a Peruvian company that produces flexible plastic

Jose Alejandro Vargas-Acha, Tomas Aramburu-Linares, Juan Carlos Quiroz-Flores, Facultad de Ingeniería y Arquitectura, Universidad de Lima, Lima Perú

ID 851 The Role of Hedonic Motivation and FOMO on the Impulsivity of e- Commerce Users during COVID-19 Pandemics in Indonesia

Dina Kamalia, Margarita Djajadinata, Fendy Hadisusanto Gunawan, Willy Gunadi, Business Management, Management Department, Binus Business School Master Program, Bina Nusantara University, Jakarta, Indonesia

ID 861 Lifetime Maximization with Restricted Connection Diversity in Wireless Sensor Networks

Cemre Erdoğan, Ayşegül Altın-Kayhan, Bülent Tavlı, Faculty of Engineering, TOBB University of Economics and Technology, Ankara, Turkey

Hüseyin Uğur Yıldız, TED University, Ankara, Turkey

ID  868 Achieving SMES Business Performance Through an Integrated Information System Success Model and TOE Framework: Review Paper

Saeed Ali Saeed Bin Al Dada Al Shehhi, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat,Johor.

Khadijah Md Ariffin, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor

ID  869 Analysis of Entrepreneurs on SME’ Agility to Stay Competitive During the Covid-19 Pandemic

Synthia Atas Sari, Ami Fitri Utami, Kenyko, Management Department, Binus Business School, Bina Nusantara University, Jakarta, Indonesia 

ID 870  Inclusive Finance in Banking and Their Effect on Economic Growth And Poverty Rate In District/City In West Java Province

Nur Azmi Karim, Entrepreneurship Departement, Bussiness School Undergraduate Program Bina Nusantara University Bandung Campus Bandung, Indonesia

Prof.Dr.Hj.Rina Indiastuti, SE, MSIE, Maman Setiawan,SE,MT,Ph.D, Dr. Ir. Bagdja Muljarijadi,SE.MS, Lecturer and researcher at the Department of Economics, Padjadjaran University

ID  872  Determining and Weighting the Sustainability Pillars: A Case Study in Petrochemical Industry

Elif Çirkin, Research Assistant of Production Management and Marketing Division, Faculty of Business Administration, Dokuz Eylül University, Muş Alparslan University, Izmir, Turkey

Aşkın Özdağoğlu, Associate Professor of Production Management and Marketing Division, Faculty of Business Administration, Dokuz Eylül University, Izmir, Turkey

ID  873  A Review of Failure Mode Effect and Criticality Analysis (FMECA)

Kiran M.B., Department of Mechanical Engineering, School of Technology, Pandit Deendayal Energy University,  Gandhinagar, Gujarat, India 

ID  874 Students’ Perceptions about perspectives and attitudes in inter-ethnic relations at the University of Malaysia

Agus Masrukhin, Character Building Development Center, Information Systems Department, School of Information Systems, Bina Nusantara University, Jakarta, Indonesia 11480

Hari Sriyanto, Character Building Development Center, Industrial Engineering Department, Faculty of Engineering, Bina Nusantara University, Jakarta, Indonesia  

ID 875  The Influence Of Talent Acquisition And Talent Pool On The Leadership Readiness Mediated By Perceived Organization Support

Dian Anggraini Puspita Sari, Firson Arya Iskandar, Hari Kusuma Yuda Perwira, and Nugroho Juli Setiadi, Marketing Management, BINUS Business School Magister Program, Bina Nusantara University, Jakarta, Indonesia 

ID  877  Visualization of Green Business Research Around the World Over Two Decades: A Bibliometric Perspective

Febby Candra Pratama and Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia

Fairuz Iqbal Maulana, Computer Science Department, School of Computer Science, Bina Nusantara University, Jakarta 11480, Indonesia

Galuh Windang Nuraulia, Economic Education Department, Universitas Negeri Malang, Malang 65145, Indonesia

ID 878 Optimizing Dorikan’s Business Performance Using Word of Mouth Strategy

Meiliana Lukman and Iston Dwija Utama, Entrepreneurship Department,  Binus Business School Undergraduate Program, Bina Nusantara University, Bandung, Indonesia

ID  879  System Improvement Through the Application of Assembly Line Balancing

Dyan C. Gonzales-Rodriguez, Assistant Professor of Industrial Engineering Department, College of Engineering, Bulacan State University, City of Malolos, Bulacan, Philippines 

ID  880  The Role of Higher Education Organizations in Inclusive Culture

Heru Widoyo, Character Building Development Center, Computer Science Department, School of Computer Science, Bina Nusantara University, Jakarta, Indonesia 11480

Agus Masrukhin, Character Building Development Center, Information Systems Department, School of Information Systems, Bina Nusantara University, Jakarta, Indonesia 11480 

ID  881  Building Two Decade of Green Economy Research Theme Map for Sustainability Using a Bibliometric Approach

Febby Candra Pratama and Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia

Fairuz Iqbal Maulana, Computer Science Department, School of Computer Science, Bina Nusantara University, Jakarta 11480, Indonesia

ID 882   The Digital Transformation of Small Business Models: Challenges of Emerging Economies during COVID-19 Pandemic

Aydan Huseynova, Syed Muhammad Shariq, Najam Ul Zia, Felicita Chromjaková, Faculty of Management and Economics, Department of Management and Marketing, Department of Industrial Engineering and Information Systems, Tomas Bata University in Zlin, Czech Republic

 ID   883  Warehouses Against Cyber-Attack Risks

Giovanni Meggiato, Sirious Nterai, Etienne Skowronski, Ruodi Gao, Muhammad Atiqur Rahman, Postgraduate students in Logistics and Transportation Management, Department of Business administration, University of Gothenburg, Gothenburg, Sweden

Shahryar Sorooshian, Associate Professor in Business Administration, Department of Business Administration, University of Gothenburg, Gothenburg, Sweden

ID 885    Analysis of Increasing Problems of Religious and Ethnic Cultural Differences: A Case Study of Increasing Tension Due to Social Media

Agus Masrukhin, Character Building Development Center, Information Systems Department, School of Information Systems, Bina Nusantara University, Jakarta, Indonesia 11480.

Jamson Siallagan, Character Building Development Center, Infor.matic Enginering Department, School of Informatic Enginering, Bina Nusantara University, Jakarta, Indonesia 11480

ID 889    Analysis of The Biggest Obstacles to Inter-Ethnic and Religious Relations on Social Media

Agus Masrukhin, Character Building Development Center, Information Systems Department, School of Information Systems, Bina Nusantara University, Jakarta, Indonesia 11480

Jamson Siallagan,. Character Building Development Center, Informatic Enginering Department, School of Informatic Enginering, Bina Nusantara University, Jakarta, Indonesia 11480

ID 893    Business Hegemony Of The United States And China In Indonesia

Fadra Faculty of Social and Political Sciences, University of Prof. Dr. Moestopo (Beragama) Jl. Hang Lekir 1, No. 8, Jakarta 10270, Indonesia.

B.A. Shiriaev and N. A. Tsvetkova Faculty of International Relations, St. Petersburg State University Ulitsa Smolnogo 1/3, 8th Entrance, St. Petersburg, 191060, Russian Federation

ID 894    Local Community Participation in Support of the Existence and Sustainability of Ecotourism Development Geopark Ciletuh-Palabuhanratu

Aris Munandar, Assc. Professor of Sociology, Faculty of Social and Political Sciences, Jakarta, Indonesia

Erna Ermawati Chotim, Lecturer in Sociology, Faculty of Social and Political Sciences, Jakarta, Indonesia

Adilita Pramanti, Lecturer in Sociology, Faculty of Social and Political Sciences, Jakarta, Indonesia

ID 896    Determinants Of Corporate Social Responsibility Disclosure In In Manufacturing Companies Listed On The Indonesia Stock Exchange In 2016 – 2019

Arifatul Aini and Tita Djuitaningsih, Bakrie University – Jakarta – Indonesia

ID 897    Comparative Analysis Return On Assets (ROA) And Economic Value Added (EVA) In Metal And Mineral Sub-Sector Companies In Indonesia Stock Exchange 2016-2020 Period

Budi Rustandi Kartawinata, Aldi Akbar, Mahir Pradana, Faculty of Communication and Business, Telkom University, Indonesia

ID 898    The Number of Social Media Followers Affects Stock Price of Banks In Indonesia

Budi Rustandi Kartawinata1, Aldi Akbar, Mahir Pradana, Faculty of Communication and Business Telkom University Indonesia
Dyah Maharani, Public Administration Program, STIA Maulana Yusuf Banten, Indonesia

ID 900    The Selection of Temperature Screening Methods for COVID-19 by Using the Fuzzy TOPSIS Technique
Tinnakorn Phongthiya and Chawis Boonmee, Department of Industrial Engineering  Faculty of Engineering, Chiang Mai University Chiang Mai, Thailand

Manuel Woschank, Chair of Industrial Logistics, Montanuniversitaet Leoben Leoben, Austria

ID 901    Cryptocurrency Exchange Application Acceptance with TAM Model in Indonesia
Annisa Dwi Ananda, Information Systems Department, School of Information Systems, Bina Nusantara University, Jakarta, Indonesia 11480

Azka Reivan Mumtaza, Information Systems Department, School of Information Systems, Bina Nusantara University, Jakarta, Indonesia 11480

Salsabila Denia Harsyarie, Information Systems Department, School of Information Systems, Bina Nusantara University, Jakarta, Indonesia 11480

Fredy Jingga, Information Systems Department, School of Information Systems, Bina Nusantara University, Jakarta, Indonesia 11480

ID 902    Factors Analysis and Prediction in Die-casting Process for  Defects Reduction

Titiwetaya Yaikratok, Pavee Siriruk, System Engineering, School of Industrial Engineering Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand.

ID 903    A Comparative Study of the Barriers to Implementing Environmentally Sustainable Practices in the UAE Construction Industry

Ammar Al-Hawarneh and Hamdi Bashir, Department of Industrial Engineering and Engineering Management College of Engineering, University of Sharjah, Sharjah, UAE

ID 906    Comparing Credibility, Attractiveness, and Brand Match-Up of Jakarta Museum Ambassadors and Museum Experience towards Visit Intention

Jelita Permata, Farras Caesarmas Putri, Marsha Herryanna & Jerry S. Justianto, Creative Marketing Program, Management Department,BINUS Business School Master Program,Bina Nusantara University, Jakarta, Indonesia, 11480.

ID 907    Effectiveness of Implementing E-Government Procurement in Sri Lanka

Gihini Weerasinghe, Banusha KanaheraArachchi, Madushan Jayaweera and Ishini Aryaratne, Udanee Samarasinghe, Navodika Karunaratna, Business School Sri Lanka Institute of Information Technology (SLIIT)

ID 908    Energy Efficient Ceramic Sanitaryware Production Planning with a Hybrid Simulation Optimization Method
Emre Doğru, Nilgun Fescioglu-Unver, Department of Industrial Engineering TOBB University of Economics and TechnologyAnkara, Turkey

ID 918    A Review – Impact of Industry 4.0 in Supply Chain

Siwangi Rawat, Institute of Management  Nirma University Gujarat, India

Dr. M.B. Kiran ,Associate Professor Department of Mechanical Engineering School of Technology, Pandit Deendayal Energy University Gujarat, India

ID 919    A Study on Location Decision Problem of Mobile Vaccination Centers

Azime Beyza Arı, Student of Industrial Engineering Faculty of Engineering and Natural Sciences Istanbul Medipol University Istanbul, 34810,Turkey

Selin Kara, Student of Industrial Engineering  Faculty of Engineering and Natural Sciences Istanbul Medipol University Istanbul, 34810,Turkey

Melis Almula Karadayı, Assistant Professor in Industrial Engineering Faculty of Engineering and Natural Sciences Istanbul Medipol University Istanbul, 34810,Turkey

Hakan Tozan, Professor in Industrial Engineering Faculty of Engineering and Natural Sciences Istanbul Medipol UniversityIstanbul, 34810,Turkey

ID 923    Plan to improve the logistical management of drug distribution in the health sector using the lean manufacturing methodology in the department of Puno

Renzo Cabrera, Student of Industrial Engineering Facultad de Ingeniería y Arquitectura, Universidad de Lima Lima, Perú

Julio Lázaro, Student of Industrial Engineering Facultad de Ingeniería y Arquitectura, Universidad de LimaLima, Perú

Wilfredo Hernández, Professor of Industrial Engineering Facultad de Ingeniería y Arquitectura, Universidad de Lima Lima, Perú

ID 924    Mutualistic Interaction Model of Start-up Communities and University Business Incubators: A Research Agenda

Iwan Iwut Tritoasmoro, Interdisciplinary School of Management and Technology, Institut Teknologi Sepuluh Nopember, Surabaya 60111, Indonesia School of Electrical Engineering, Telkom University, Bandung, Indonesia

Udisubakti Ciptomulyono, Interdisciplinary School of Management and Technology,  Institut Teknologi Sepuluh Nopember, Surabaya 60111, Indonesia

Tatang Akhmad Taufik, Interdisciplinary School of Management and Technology,  Institut Teknologi Sepuluh Nopember, Surabaya 60111, Indonesia

Wawan Dhewanto School of Business and Management, Bandung Institute of Technology Jl.Ganesha 10 Bandung, Indonesia

ID 925    Multi-Criteria Supplier Selection Rapid Diagnostic Test Antigen (RDT-Ag) Test Kit Using AHP TOPSIS Methods (A Case Study in “X” Laboratory)

Aris Syaiful Utama and I. Nyoman Pujawan, Departement System and Industrial Engineering Faculty Of Industrial Technology and Systems Engineering Institut Teknologi Sepuluh Nopember Surabaya, Indonesia

ID 926    Perceived Risk as a Moderator in The Relationship Between Perception of Celebrity Endorsement and Purchase Intention Skincare Product in Indonesia

Rini Setiowati, Dean of Master Management Program Binus Business School Master Program Bina Nusantara University  Jakarta, Indonesia

 David Sinaga, Creative Marketing Program, Management Department Binus Business School Master Program Bina Nusantara University Jakarta, Indonesia

Zahra Mustika Utami, Creative Marketing Program, Management Department Binus Business School Master Program Bina Nusantara University  Jakarta, Indonesia  

ID 927    The Influence of IT Infrastructure Capability, IT Business Spanning Capability, and IT Proactive Stance on Organizational Performance, mediated by Organizational Agility

I Gede Eke Djajasaputra, Heidi Lianawaty Lisan, Nur Cholis Dwi Saputro, and Tengku Mohd Khairal Abdullah, Business Management Program, Management Department, Binus Business School Master Program, Bina Nusantara University, Jakarta, Indonesia, 11480

ID 929    Determining the Matchdays for the Turkish Super League using Non-Linear Binary Integer Programming 

Yasin Göçgün, Assistant Professor of Industrial Engineering Faculty of Engineering and Natural Sciences İstinye University İstanbul, Turkey

Niyazi Onur Bakır, Associate Professor of Mechanical and Industrial Engineering Sultan Qaboos University, Al Khoudh, Sultanate of Oman

Baba Ali Saleh, Master’s Student of Industrial Engineering,Faculty of Engineering and Natural Sciences Altınbaş University İstanbul, Turkey

ID 932    Considerations Prior Adoption of Design Thinking for Project Management

Gigih Suhartanto, and Tengku, Mohd. Khairal Abdullah, Business Management Program, Management DepartmentBinus Business School Master Program,Bina Nusantara University, Jakarta, Indonesia.

ID 933    Analysis on Ecommerce Platforms using Marketing Dashboards and Forecasting Techniques

Hannah Grace C. Holgado, Mapua University, Philippines
Ericson D. Dimaunahan, Mapua University, Philippines

ID 934    Project Management vs Product Management: A View on The Journey From Project to Product in Software Development

Şenay Demirel, Doctorate Student in Engineering Management Department Faculty of Engineering and Natural SciencesBahcesehir University Istanbul, Turkey

Alper Camcı, Assist. Professor in Engineering Management Department  Faculty of Engineering and Natural Sciences Bahcesehir University Istanbul, Turkey

ID 935    Impact of K to 12 Program to a University’s College Freshman Intake

Lalaine Rimonte, School of Information Technology, Mapúa University Manila, Philippines
Ericson D. Dimaunahan, Mapúa University Manila, Philippines

ID 936    Capability-Based Facility Layout Design with Unequal-Area Departments

Bilge Varol, Research Assistant in Industrial Engineering Faculty of Engineering and Natural Sciences Bahcesehir University Istanbul, Turkey

Kemal Subulan, Associate Professor of Industrial Engineering Faculty of Engineering Dokuz Eylul University Izmir, Turkey

Adil Baykasoğlu, Full Professor of Industrial Engineering Faculty of Engineering Dokuz Eylul UniversityIzmir, Turkey

ID 937    Sizing of Raw Materials in a Corrugated Cardboard Box Manufacturing Company via Simulated Annealing Incorporating Integer Linear Programming

Ilkim Sipahi, Industrial Engineer The Graduate School of Natural and Applied Sciences Dokuz Eylul University Izmir, Turkey

Adil Baykasoğlu, Full Professor of Industrial Engineering Faculty of Engineering Dokuz Eylul University Izmir, Turkey

Kemal Subulan, Associate Professor of Industrial Engineering Faculty of Engineering Dokuz Eylul University Izmir, Turkey

ID 938    Analysis of Supply Chain Complexity Drivers in Make-to-Stock and Make-to-Order Supply Chain using AHP-DEMATEL Approach

Yahya Al Hinai, Sujan Piya, Nasr Al-Hinai, Department of Mechanical and Industrial Engineering College of Engineering, Sultan Qaboos University Muscat, Oman

ID 942    Effects of the Introduction of the Hyperloop on Existing Supply Chains

Malick Ndiaye, Associate Professor of Industrial Engineering College of Engineering, Department of Industrial Engineering American University of Sharjah Sharjah, United Arab Emirates (UAE)

Philip Jarouj, Hassan Sobh, Ali Eisa Almheiri, Anas Azzouz, Industrial Engineering Graduates College of Engineering, Department of Industrial Engineering American University of Sharjah Sharjah, United Arab Emirates (UAE)

ID 943    Analysis Of ISO 45001:2018 And Performance Management Implementation Toward Work Accidents And Performance Of Companies In Indonesia’s Leading Steel Industry

Eri Yurizki1, Student of Master Degree Industrial Engineering Faculty of Industrial Engineering Mercubuana University Jakarta, Indonesia

Zulfa Fitri Ikatrinasari, Lecturer of Master Degree Industrial Engineering Faculty of Industrial Engineering Mercubuana University Jakarta, Indonesia.

ID 946    Performance Improvement of a Restaurant, Through Optimization Applications

Dr. Sobhi Mejjaouli, Assistant Professor of Industrial Engineering Faculty of Engineering Al Faisal University Riyadh, Saudi Arabia

Badr Abutaleb, Student of Industrial Engineering  College of Engineering Al Faisal University Riyadh, Saudi Arabia

Ahmed Al Munajem, Student of Industrial Engineering College of Engineering Riyadh, Saudi Arabia

ID 948    Warehouse Layout Design: Drinking Water Factory

Tinnakorn Phongthiya, Chompoonoot Kasemset, Tanyarat Muangsiri, Supatchara Chanchai, Department of Industrial Engineering, Faculty of Engineering  Chiang Mai University, Chiang Mai, Thailand.

ID 949    Sustainability in Municipal Solid Waste Management System using multi-objective optimization model

Smeetasree Pati, Research Scholar Department of Management Studies IIT Roorkee India

Rajat Agrawal, Professor Department of Management Studies IIT Roorkee India

ID 951    Reorganization and Development of a Car Design Laboratory through QFD and SDE Models to Generate Innovative Projects

Giulio Galiè, Patrich Ferretti, Christian Leon-Cardenas, Giulia Alessandri, Gian Maria Santi, Department of Industrial Engineering Alma Mater Studiorum University of Bologna Viale Risorgimento, 2 – 40136, Bologna, Italy

ID 952    Hospital Selection Problem: An Integrated Analytic hierarchy process (AHP) and Fuzzy- TOPSIS Approach

Masoud Rahiminezhad Galankashi, Imam Khomeini International University-Buin Zahra Higher Education Center of Engineering and Technology, Qazvin, Iran

Elaheh Nasri, Imam Khomeini International University-Buin Zahra Higher Education Center of Engineering and Technology, Qazvin.

Syed Ahmad Helmi,School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310, Johor Bahru, Malaysia Center for Engineering Education, Universiti Teknologi Malaysia, 81310, Johor Bahru, Malaysia

Mahdiyeh Moghadam Arjmand, Imam Khomeini International University-Buin Zahra Higher Education Center of Engineering and Technology, Qazvin, Iran

ID 953    ERP Software Selection Criteria: A Fuzzy Analytic Hierarchy Process (FAHP) Approach

Masoud Rahiminezhad Galankashi, Imam Khomeini International University-Buin Zahra Higher Education Center of Engineering and Technology, Qazvin,

Aydin Ahmadshoar, Imam Khomeini International University-Buin Zahra Higher Education Center of Engineering and Technology, Qazvin,

Syed Ahmad, HelmiSchool of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310, Johor Bahru, Malaysia Center for Engineering Education, Universiti Teknologi Malaysia, 81310, Johor Bahru, Malaysia

Mahdiyeh Moghadam Arjmand, Imam Khomeini International University-Buin Zahra Higher Education Center of Engineering and Technology, Qazvin, Iran

ID 954    Employee Scheduling Problem for A Retail Store with Multiple Product Categories and Heterogeneous Employees

Kaan Apak, Nazlı Can Daşdemir, Asena Ayşe Gevşek, Deniz Ata Turhan, Yağız Yüksel, Ömer Zorlubilek, Bachelor Student In Industrial Engineering, Faculty Of Engineering, Özyeğin University Istanbul, Turkey

ID 965 Drilling Rig Planning and Scheduling
Ahmed Mohamed Al-Mazroey, Husam Hamdan Al-Nasseri, Mazin Matar Al-Rubkhi, B.Eng, Sultan Qaboos University, 2021

ID 967    Machine Learning Based Model for Predicting Student Outcomes

Dijana Oreški, Associate Professor of Data Mining Faculty of Organization and Informatics University of Zagreb Varazdin, Croatia

Dora Zamuda, Student of Information and Business Systems Faculty of Organization and Informatics University of Zagreb Varazdin, Croatia

ID 969    Reliability Analysis of Sensorized Stamping Presses by Generalized Fault Trees

Eugénio M. Rocha, Department of Mathematics and Center of Research and Development in Mathematics and Applications (CIDMA), Campus de Santiago, Aveiro, 3810-193, Portugal

Pedro Nunes and Jose Santos, Department of Mechanical Engineering and Center for Mechanical Technology and Automation  (TEMA), Campus de Santiago, Aveiro, 3810-193, Portugal

ID 970    Project Management Methodologies Success Factors Evaluation Employing Intuitionistic Fuzzy Cognitive Map Method

Mehtap Dursun, Full Professor of Industrial Engineering Decision Analysis Application and Research Center Faculty of Engineering and Technology Galatasaray University Istanbul, Turkey

Hakan Mutlu, PhD student in Industrial Engineering Faculty of Engineering and Technology Galatasaray University Istanbul, Turkey

Nazli Goker, PhD in Industrial Engineering  Faculty of Engineering and Technology Galatasaray University Istanbul, Turkey

ID 971    Industrial approach in vibration analysis of mechanical elements
 Ángel Mariano Rodríguez Pérez, University of  Huelva, Spain

Julio José Caparrós Mancera, University of  Huelva, Spain

José Antonio Hernández Torres, University of  Huelva, Spain

ID 972    Analysis of governance  principles in the legislative frameworks for Low-income housing development in South Africa

Nana Mhlongo, PhD Candidate in Engineering Management Faculty of Engineering and Built Environment University of Johannesburg Johannesburg, South Africa

Trynos Gumbo, Head of Department and Associate Professor University of Johannesburg, Department of Urban and Regional planning, Office 6062, Sixth Floor, John Orr Building, Beit and Siemert Street, 2028. Johannesburg, South Africa

Innocent Musonda, Associate Professor – Construction Management  Director: Centre for Applied Research + Innovation in the Built Environment (CARINBE)  Leader: ESKOM’s EPPEI Specialization Centre   University of Johannesburg, John Orr Building, Doornfontein Campus

ID 973    PDCA Protocol to ensure a Data-Driven Approach for Problem-Solving

Ângela F. Brochado, Department of Economics, Management, Industrial Engineering and Tourism (DEGEIT)University of Aveiro, Portugal

Eugénio M. Rocha, Department of Mathematics (DMAT) and Center for Research and Development in Mathematics and Applications (CIDMA), University of Aveiro, Portugal

Carina Pimentel, DEGEIT and Systems for Decision Support Research Group (GOVCOPP) University of Aveiro, Portugal

ID 975    Social Innovation to Promote Financial Inclusion in the Microfinance Sector in Mexico

María del Rocío Soto-Flores, Christian Muñoz-Sánchez
Ingrid Yadibel Cuevas-Zuñiga, Marco Antonio García-Sánchez, Business School (ESCA-STO) National Polytechnic Institute of Mexico (IPN) Mexico City, Mexico              

ID 978    Adding Relations with Long Communication Lengths between the Top and K Members of the Same Level in a Pyramid Organization Structure of a Complete K-ary Tree

Kiyoshi Sawada, Department of Economic Information University of Marketing and Distribution Sciences Kobe, Japan

ID 980 Musculoskeletal Risks for using Smart Devices in Online Study of University Students
Sara Alnaqbi, Fatima Alzarouni, Dina Al Sowadi, Rawan Kittaneh and Mohammad Khadem, Department of Industrial Engineering and Engineering Management, University of Sharjah, Sharjah, UAE

ID 981 Evaluating Factors Affecting Construction Safety Performance in Sharjah During Pandemic (Covid-19)
Maitha AlSuwaidi and Mohammad Khadem, Department of IEEM, University of Sharjah, Sharjah, UAE

ID 982    How do African cities benefit from using smart technologies? Perspectives from Local Government Practitioners

Tlou Phillemon Mathane ,Masters Student, University of Johannesburg, South Africa

Trynos Gumbo, Head of Department and Associate ProfessorUniversity of Johannesburg, Department of Urban and Regional planning

ID 984    Stakeholder involvement and Institutionalisation of smart cities applications: A Case study in the City of Tshwane

Tlou Phillemon Mathan,e Masters Student, University of Johannesburg, South Africa

Trynos Gumbo, Head of Department and Associate Professor University of Johannesburg, Department of Urban and Regional planning, Office 6062, Sixth Floor, John Orr Building, Beit and Siemert Street, 2028. Johannesburg, South Africa

ID 990    Mourning ceremony in the context of Information Technology

Kamran yeganegi, Assistant Professor of Industrial Engineering Zanjan Branch Islamic Azad University Zanjan, IRAN

Hossein Ali Taghi Tehrani, PH.D of  Futurology Researcher of Middle East Strategic Studies Research Institute Tehran, IRAN

Ahmed J. Obaid A., Faculty of Computer Science and Mathematics University of Kufa  Najaf, IRAQ

ID 992    Cost of Quality: Literature Review Based on Meta-Analysis

Wiwik Sulistiyowati, Mokh Suef, Moses Laksono Singgih, Department of Industrial and Systems Engineering Institut Teknologi Sepuluh Nopember Surabaya, Indonesia  Industrial Engineering Majoring Universitas Muhammadiyah Sidoarjo Sidoarjo, Indonesia

ID 993    Enhancing Toughness of Fiber Reinforced Plastic Composites using Nano-Materials

Noha M Hassan, Zied Bahroun, Mahmoud Awad, Rami As’ad, Associate Professor of Industrial Engineering, College of Engineering American University of Sharjah Sharjah, United Arab Emirates

Assil Charkaoui, Ph.D candidate, Materials Science and Engineering Program, American University of Sharjah, Sharjah, United Arab Emirates

ID 994    Design, Simulation, and Fabrication of Steering Controlled Headlight Mechanism

Abdulaziz Alshuhaiman, Abdulmajeed Alqahtani, Abdulrahman Alkaboor, Ayidh Alotaibi and Sultan Alshammary, Full time Mechanical Engineering students at Jubail University College Jubail, Saudi Arabia
Mohamed Elshabasy Assistant professor, at Jubail University College Department of Mechanical Engineering. Jubail, Saudi Arabia

ID 1007  Linking Sustainability, Resilience and Liveability with Smart City Development: Modeling Interconnections Using Systems Approach

Adeeb A. Kutty, Murat Kucukvar, Galal M. Abdella, Mechanical and Industrial Engineering Department College of Engineering, Qatar University Doha, Qatar

Najeeba Kutty, Architectural Engineering Department College of Engineering, United Arab Emirates University Al-Ain, United Arab Emirates

Nuri C. Onat, Qatar Transportation and Traffic Safety Centre College of Engineering, Qatar University Doha, Qatar

ID 1009  Automatic Agile Transformation With Approach by Modeling from BPMN Collaboration Diagram Model to UML Use Case

Ouzayr Rabhi, MATSI Laboratory, EST Mohammed First University, Oujda, Morocco

Ibtissam Arrassen, Laboratory for Computer Science Research Faculty of Sciences Mohammed First University, Oujda, Morocco

Mohammed Erramdani, Department of Management, EST Mohammed First University, Oujda, Morocco.

ID 1013  HR Digitalization as a Critical HR practice to Navigate through Covid-19 for the Improvement of the Employee Job Performance: Review Paper

Ahmed Saleh Ahmed Saif Al-Shameri, PhD Student Faculty of Technology Management and Business Universiti Tun Hussein Onn Malaysia Johor, Malaysia

Siti Sarah Binti Omar, Senior Lecturer Head of Department Faculty of Technology Management and Business Universiti Tun Hussein Onn Malaysia Johor, Malaysia

ID 1014  PATTERN – Pathfinding Algorithms To Tackle Effective Route Navigation

Tan Beng Yang, Goh Zi Yu, Ng Qi Heng and Chow Ban Hoe, River Valley High School Singapore 649961

ID 1015  Measuring Food Quality and Safety for Food Security Related Assessments: A Microscopic Review

Suhila Zaffer, Muna Al-Obadi, Rania M. Ibrahim, Khalifa N. Al-Khalifa, Mechanical and Industrial Engineering Department College of Engineering, Qatar University Doha, Qatar

ID  1017  Risk Analysis of Methanol Transfer Process by Hazard and Operability Study (HAZOP) Method in Biodesel Plant
Rini Kristianti and Indra Setiawan, Master of Industrial Engineering Student, Universitas Mercu Buana, Jl. Meruya Selatan No.1 Kembangan, Jakarta 11650, Indonesia

Hernadewita, Master of Industrial Engineering Lecturer, Universitas Mercu Buana, Jl. Meruya Selatan No.1 Kembangan, Jakarta 11650, Indonesia

ID  1019   THE EFFECT OF OPTIMIZERS ON SIAMESE NEURAL NETWORK PERFORMANCE
Farah F. Alkhalid, Control and Systems Engineering, University of Technology- Iraq, Baghdad, Iraq

ID  1021   Sustainable Food Systems: Recent Advances, Assessment Techniques, and Methodological Compositions   
Doa’a M. F. Salameh, Galal M. Abdella, Murat Kucukvar, Mechanical and Industrial Engineering Department, College of Engineering, Qatar University, Doha, Qatar

ID 1030 The review on various strategies adopted for implementing and sustaining 5s in a manufacturing industries
Mr. Manank Patel and Dr. MB. Kiran, Department of mechanical engineering, Pandit Deendayal Energy University, Gandhinagar, Gujarat, India.

ID 1031 Occupational Safety and Health Risk Analysis on Skycrapers Construction Projects in the Jakarta

Ia Asih and Hernadewita, Master of Industrial Engineering, Universitas Mercu Buana, Jl. Meruya Selatan No.1 Kembangan, Jakarta 11650, Indonesia

Hendra, Faculty of Mechanical Engineering, Universitas Sultan Ageng Tirtayasa, Banten, Indonesia

ID 1032 Reducing customers wait time for repairs in the service department at C-Auto in Puerto Rico
Joshua R. Rodriguez and Jannette Pérez-Barbosa, Department of Engineering, Universidad Ana G. Méndez, Gurabo, Puerto Rico 00778, USA

ID 1034 Identify the Key Success Factors and Enabling Strategies for Successful Blockchain Implementation in Supply Chain

Saranya Muthuraj, MBA-MS Student, Amrita School of Business, Amrita Vishwa Vidyapeetham University, Bengaluru, India

Dr. Shekar Babu PhD, Professor & Founding Head, Amrita Vishwa Vidyapeetham University, Bengaluru, India

Shijith Kumar PM, Assistant Professor, SolBridge International School of Business, Woosong University, Daejeon, South Korea

ID 1035 Impact on Employee Engagement due to Covid-19 in India

Nitu Bharti, Research Associate, MBA in Human Resource and Finance
Bengaluru, India
Dr. Shekar Babu PhD, Professor & Founding Head, Amrita Vishwa Vidyapeetham University, Bengaluru, India

ID 1037 Explore the impact on Sustainability by Space Companies
Aditya Drolia, Cambridge International AS & A Level, Inventure Academy
Bangalore, India

Dr. Shekar Babu PhD, Professor & Founding Head, Amrita Vishwa Vidyapeetham University, Bangalore, India

ID 1039 Business Responsibility and Sustainability Reporting (BRSR) – An Exploratory Study
Bhawana Menghnani, Research Associate, Bengaluru, India
Dr. Shekar Babu PhD, Professor & Founding Head, Amrita Vishwa Vidyapeetham University, Bengaluru, India

ID 1041 Lean Management: Reducing Complexity towards Improving Process Flow Using Arena Simulation in IR4.0
Ahmad Nur Aizat Ahmad, Md Fauzi Ahmad, Norhadilah Abdul Hamid, Nor Aziati Abdul
Hamid, Lee Tee Chuan, Gusman Nawanir, Mohd Kamarul Irwan Abdul Rahim , Mustaqqim Abdul Rahim
Department of Production and Operation, Faculty of Technology Management and Business,
Universiti Tun Hussein Onn Malaysia (UTHM), Parit Raja,Batu Pahat, Johor, MALAYSIA
Faculty of Industrial Management, Universiti Malaysia Pahang (UMP), MALAYSIA
School of Technology Management and Logistics, Universiti Utara Malaysia, MALAYSIA.
Department of Civil Engineering, School of Environmental Engineering, Universiti Malaysia, Perlis (UniMAP), MALAYSIA

ID 1046 Reflective Learning Practice in Leadership Development Program
Sri Dhruthi Nallani, Research Assistant, Amrita Vishwa Vidyapeetham
Bengaluru, India

Prof. A D Balakrishnan, Professor, Amrita Vishwa Vidyapeetham
Bengaluru, India

Prof. Shekar Babu PhD, Professor & Founding Head, Amrita Vishwa Vidyapeetham, Bengaluru, India

ID 1052 Analyzing Online and Conventional Transportation Policy : The Case of South Tangerang City of Indonesia

Retnowati Wahyuning Dyas Tuti, Department of Public Administration
University of Muhammadiyah Jakarta, South Tangerang, Indonesia

Asep Setiawan, Head of Master Program in Political Science, University of Muhammadiyah Jakarta, South Tangerang, Indonesia

Winda Dwi Astuti Zebua, Department of Communication, University of Muhammadiyah Jakarta, South Tangerang, Indonesia

Devia Andiani, Department of Public Administration, University of Muhammadiyah Jakarta, South Tangerang, Indonesia

ID 1053  Analysis of FMEA to Determine Failure Mode Priority on the TS Analyzer Machine

Welly Atikno, Master of Industrial Engineering Student, Faculty of Engineering, Universitas Mercu Buana Jakarta, Indonesia

Lien Herliani Kusumah, Master of Industrial Engineering Lecturer
Faculty of Engineering, Universitas Mercu Buana Jakarta, Indonesia

ID 1054 Analysis of Student Communication Skills in STEM Learning Using Engineering Design Process
Indah Widiastuti, Suci Oktavia, Valiant Lukad Perdana Sutrisno, Department of Mechanical Engineering Education, Sebelas Maret University

ID 1055 Learning Application Design Using Predict Observe Explain (POE) Model for Computer Practicum in the COVID-19 Pandemic Period in Higher Education
Zulhalim, Assistant Professor of Information System, Department of Information System
STMIK Jayakarta, Jakarta, Indonesia
Anton Zulkarnain Sianipar, Assistant Professor of Mathematics & Statistics, Department of Information Technology, STMIK Jayakarta, Jakarta, Indonesia
Saprudin, Assistant Professor of Accounting, Department of Accounting, STIE Jayakarta, Jakarta, Indonesia

ID 1056 Design and Implementation Smart Information Service Customer Touching Application to Support Customer Relationship Management
Muhammad Afnan Habibi, Electrical Engineering Department, Faculty of Engineering, State University of Malang, Malang, Indonesia
Ahmad Mursyidun Nidhom, Febrianto Alqodri and Azmi Fachriza Firdaus, Informatics Engineering Department, Faculty of Engineering, State University of Malang, Malang, Indonesia

ID 1057 “I chose vocational teacher education because”. Exploring the factors influencing the choice of education amongst vocational pre-teacher students in Indonesia
Towip Towip, Mechanical Engineering Education Department, Faculty of Teacher Training and Education, Universitas Sebelas Maret, Surakarta, Indonesia
Andri Setiyawan, Mechanical Engineering Department, Faculty of Engineering, Universitas Negeri Semarang, Semarang, Indonesia

ID 1058 Improved Haar-Like Feature on Tomato Fruit Maturity Classification with K-Nearest Neighbor
Febri Liantoni, Nurcahya Pradana Taufik Prakisya, Yusfia Hafid Aristyagama, and Puspanda Hatta, Department of Computer and Informatics Education, Universitas Sebelas Maret, Surakarta, Indonesia

ID 1059 Exploring The Impact of Design Thinking on the Development of Computational Thinking Skill: Review of the Literature
Maryam Fadhilllah Naylufarhani Hardjanto, Cucuk Budiyanto, and Yusfia Hafid Aristyagama, Department of Informatics Education, Sebelas Maret University, , Surakarta, Indonesia

ID 1060 The Enticing Knowledge of Computational Thinking Development: Lessons Learnt from Recent Educational Literature
Dwi Oktavia, Cucuk Wawan Budiyanto, and Rosihan Ari Yuana, Department of Informatics Education, Sebelas Maret University, , Surakarta, Indonesia

ID 1061 Digital Transformation Readiness in Higher Education Institutions in Indonesia: A Systematic Literature Review
Rizka Latifah, Cucuk Budiyanto, and Herman Saputro, Vocational Teacher Education, Faculty of Teacher Training and Education, Universitas Sebelas Maret, Surakarta, Indonesia

ID 1062 Research on Multi-closed-loop Mode Teaching Reform for Postgraduate Courses of Automation Major Under the Background of Emerging Engineering Construction
Li Mingxing, Hao Fei, School of Automation Science, and Electrical Engineering, Beihang University, Beijing, China

ID 1063 A Systematic Review of IoT Platforms in Educational Processes
Irene Cittaning Laksmi, Puspanda Hatta, and Endar Suprih Wihidayat, Faculty of Teacher Training and Education, Universitas Sebelas Maret, Surakarta, Indonesia

ID 1064 The Implementation of GIS as a means for Study Source of Community of Practice
Wiku Sidik Dananjaya, Yusfia Hafid Aristyagama, and Cucuk Wawan Budiyanto, Department of Informatics Education, Sebelas Maret University, , Surakarta, Indonesia

ID 1065 Integration of STEAM Method with Constructivism Approach in Graphic Design Subject for Information Technology Vocational High School: A Systematic Reviews
Alfarizky Mutrian Trisna, Puspanda Hatta and Cucuk Wawan Budiyanto, Department of Informatics Education, Sebelas Maret University, , Surakarta, Indonesia

ID 1066 Interdisciplinary Research on Microelectronics Undergraduate Education
Xiaoyang Lin, Zhizhong Si, School of Integrated Circuit Science and Engineering, Beihang University, Beijing, China
Jianlie Yang, School of Computer Science and Engineering, Beihang University, Beijing, China

ID 1067 Arduino Controlled Hospital Sanitization Robot Vehicle
Kashif Ahmed, Faculty of Electrical and Electronics Engineering, CMR Institute of Technology, Bengaluru, Karnataka, India
Chiranjeevi Venkatesh, Gayathri Srinivasulu Chetty, Gowtham Honnamachanahalli, Krishnappa, and Harish Sadegowda, Students of Electrical and Electronics Engineering, CMR Institute of Technology, Bengaluru, Karnataka, India

ID 1068 Using Augmented Reality to Learn English for Children
Heliza Rahmania Hatta and Muhammad Hakim, Department of Informatics, Faculty of Engineering, Mulawarman University, Samarinda, Indonesia
Septya Maharani, Dyna Marisa Khairina, and Hario Jati Setyadi, Department of Information Systems, Faculty of Engineering, Mulawarman University, Samarinda, Indonesia

ID 1069 Addressing Computational Thinking Needs’ of Visually Impaired Children
Mey Tias Andry Pamungkas, Cucuk Wawan Budiyanto, and Suharno, Vocational Teacher Education, Faculty of Teacher Training and Education, Universitas Sebelas Maret, Surakarta, Indonesia

ID 1070 Evaluation of Mobile-based Learning Media Application for Python Programming Learning
Fadilla Shinta Devi, Puspanda Hatta, and Rosihan Ariyuana, Department of Informatics Education, Sebelas Maret University, , Surakarta, Indonesia

ID 1071 System Detection Ripeness of Fresh Fruits Bunch Palm Oil with YOLOv4
Ahmad Sopian, Student in Computer Science, Faculty of Math and Sciences, IPB University, Bogor, Indonesia
Kudang Boro Seminar, Professor in Mechanical & Biosystem Engineer, Faculty of Agriculture and Technology, IPB University, Bogor, Indonesia
Sudradjat, Profesor in Agronomy and Holticulture, Faculty of Agriculture, IPB University, Bogor , Indonesia

ID 1072 Developing Self-Assessment Research Competency Instruments for Prospective Building Engineering Teachers
Sri Sumarni, Faculty of Teacher Training and Education, Universitas Sebelas Maret, Surakarta, Indonesia
Muhammad Akhyar, Faculty of Teacher Training and Education, Universitas Sebelas Maret, Surakarta, Indonesia
Muhammad Nizam, Department of Electrical Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
Herry Widyastono, Faculty of Teacher Training and Education, Universitas Sebelas Maret, Surakarta, Indonesia

ID 1073 Local Adaptive Curriculum Model (LACM) as An Alternative to Address Competency Gap Between Vocational School Graduates and Industry
Mustafa, Doctoral Program of Information System, School of Postgraduate Studies, Diponegoro University, Semarang, Indonesia
Adian Fatchur Rochim and Oky Dwi Nurhayati, Departement of Computer Engineering, Diponegoro University, Semarang, Indonesia

ID 1074 The Influence of Replacement of Fine Aggregates with Slag Waste on Content Weight and Compressive Strength in Paving Block
Sukatiman, Ida Nugroho Saputro, and Ma’ruf Mahmudi, Departement of Civil Engineering Education, Sebelas Maret University, Surakarta, Indonesia

ID 1090  The Analysis of Factors Affecting Economic Growth in  Indonesia During 2014 – 2018
Dedy Setiawan, Islamic State University of Sunan Gunung Jati Bandung, Indonesia
Ikhsan Nendi, Mitra Yogyakarta Institute of Economic Science, Indonesia
Siti Komara, Paramadina University, Indonesia

ID 1092 Indonesian Lobster Seed Trade Policy To Vietnam in 2014-2019

Rahiel, Study Program of International Relations, Faculty of Social and Political Sciences

Prof. Dr. Moestopo (Beragama) University, Jakarta, Indonesia.

ID 1093  The Relevances of Poda Na Lima as a Solution to the Covid19 Problems 

Iskandarsyah Siregar (Corresponding Author), Head of Center for Nusantara Sociocultural Studies, Universitas Nasional, Jakarta, Indonesia

Adinda Arifiah, Lecturer in Communication, Department of Communication
Universitas Siber Asia, Jakarta, Indonesia

ID  1097 Relations between Indonesia and China : Vaccine Diplomacy  in the Era of the Covid-19 Pandemic

Ratu Ulfatunisa, International Reltions Student, Faculty of Social and Political Science, Universitas Nasional, Jakarta, Indonesia

Irma Indrayani, Lecturer in International Relations, Faculty of Social and Political Science, Universitas Nasional, Jakarta, Indonesia

ID 1099 Parliamentary Threshold in Multi-Party System in Indonesia

Djoni Gunanto, Political Science, Faculty of Social and Political Sciences
University of Muhammadiyah Jakarta

Ma’mun Murod, Political Science, Faculty of Social and Political Sciences
University of Muhammadiyah Jakarta

Muhammad Sulaiman, Political Science, Faculty of Social and Political Sciences, University of Muhammadiyah Jakarta

ID 1100 Ambiguity of Government Statement on Covid-19 Issue

Sara Dwi Anjani, Faculty of Language and Literature, National University

Iskandarsyah Siregar (Corresponding Author), Head of Center for Nusantara Sociocultural Studies, Universitas Nasional, Jakarta, Indonesia
ID 1103 The Impact of Uneven Distribution of Vaccines by the World Health Organization (WHO) In South Africa
Zulkarnain, International Relations Department Faculty of Sosial and Political Sciences, Universitas Nasional, Jakarta

Suci Nur Ramadhani, International Relations Department, Faculty of Sosial and Political Sciences, Universitas Nasional, Jakarta

ID 1118 Optimizing the Liver/Kidney Organ Donation Waiting List in Antalya Using Maxsat and Graph Model
Semail ÜLGEN, Associate Professor of Industrial Engineering
Faculty of Engineering and Natural Sciences, Antalya Bilim University, Antalya,Turkey

Elifnaz Yangın, Faculty of Engineering and Natural Sciences, Antalya Bilim University, Antalya,Turkey

© IEOM Society International - 2017 IEOM 2018 - Web Design by Suvro Sudip