Conference Committee
Honorary Chairs
- Dr. Kuncoro Diharjo, S.T., M.T., Vice Rector for Research and Innovation, Universitas Sebelas Maret (UNS)
- techn. Ir. Sholihin As’ad, M.T., Dean, Faculty of Engineering Universitas Sebelas Maret (UNS)
Conference Chairs
- Dr. Jafri Mohd. Rohani, Associate Professor, Materials, Manufacturing & Industrial Engineering, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Johor, Malaysia
- Dr. Ir. Wahyudi Sutopo, ST., M.Si, IPM, Professor, Dept. of Industrial Engineering, Universitas Sebelas Maret (UNS), Indonesia and President, IEOM Indonesia Chapter &Director, IEOM Asia Pacific Operations
- Ahad Ali, Ph.D., Executive Director – IEOM Society. Professor and Director of IE, Lawrence Technological University, Southfield, Michigan, USA
Program Chairs
- Dr. Muh. Hisjam, STP, MT, Department of Industrial Engineering, Universitas Sebelas Maret
- Dwi Agustina Kurniawati, S.T., M.Eng., Ph.D, Department of Industrial Engineering, Universitas Islam Negeri Sunan Kalijaga, Yogyakarta, Indonesia
- Dr. Anak Agung Sagung Manik Mahachandra Jayanthi Mertha, ST, MSc, Department of Industrial Engineering, Universitas Diponegoro, Semarang, Indonesia
Technical Chairs
- Abdul Talib Bon, Professor of Technology Management, Universiti Tun Hussein Onn Malaysia and President of IEOM Malaysia Chapter
- Adibah Shuib, Associate Professor, Faculty of Computer and Mathematical Sciences, Universiti Teknologi MARA, Shah Alam, Malaysia
- Ts. Dr. Muhd Ikmal Isyraf Bin Mohd Maulana, Senior Lecturer, School of Mechanical Engineering, Universiti Teknologi Malaysia
Diversity and Inclusion Chairs / Women in Industry and Academia Chairs
- Lina Gozali, S.T., M.M., Ph.D, Department of Industrial Engineering, Universitas Tarumanegara, Jakarta, Indonesia
Global Engineering Education Chairs & The 2nd Indonesia Engineering Education Conference (the 2ND IEEC) COMMITTEE:
- Prof. Dr. Ir. Wahyudi Sutopo, ST., M.Si, IPM Industrial Engineeng Department, Universitas Sebelas Maret, Indonesia (Chair),
- Dr. Naniek Utami Handayani, S.Si, MT, Department of Industrial Engineering, Universitas Diponegoro, Semarang, Indonesia (Co-Chair),
- Assoc. Prof. Dr Syed Ahmad Helmi Syed Hassan, Associate Fellow, Center for Engineering Education (CEE), Universiti Teknologi Malaysia (Co-Chair),
- Dr. Abu Masud, Wichita State University, Kansas, USA (Co-Chair),
- Dr. Techn.Ir. Sholihin As’ad, M.T., Civil Engeneering Department, Faculty of Engineering Universitas Sebelas Maret
- Prof. Ir. M. Agung Wibowo, MM, M.Sc, Ph.D., Civil Engeneering Department, Faculty of Engineering, Universitas Diponegoro, Semarang, Indonesia
- Prof. Dody Ariawan, S.T., M.T., Ph.D., Mechanical Engineering Department, Faculty of Engineering, Universitas Sebelas Maret,
- Dr. Titis Srimuda Pitana, ST, M.Trop., Arch., Architecture Department, Faculty of Engineering, Universitas Sebelas Maret,
- Dr. Eng. Kusumaningdyah Nurul Handayani, S.T., M.T. Architecture Department, Faculty of Engineering, Universitas Sebelas Maret,
- Dr. Hamid Parsaei, Texas A&M University (College Station) and Texas A&M University, Qatar,
- Dr. Grace Kanakana of Tshwane University of Technology, Pretoria, South Africa,
- Dr. Achmad Basuki, ST., MT, Civil Engineering Department, Universitas Sebelas Maret,
- Dr. Yosafat Winarto, ST, MT, Architecture Department, Universitas Sebelas Maret,
- Dr. Muh. Hisjam, STP, MT, Industrial Engineeng Department, Universitas Sebelas Maret,
- Fitrian Imaduddin, S.T., M.Sc., Ph.D, Mechanidal Engineering Department, Univesitas Sebelas Maret
- Dr. Joko Waluyo, ST., MT, Chemical Engineering Department, Universitas Sebelas Maret,
- Ratri Werdiningtyas, S.T., M.T., Ph.D, Regional Urban Planinning Department, Universitas Sebelas Maret,
- Dr. Eng Faisal Rahutomo, ST., M.Kom. Electrical Engineering Department, Universitas Sebelas Maret
Conference Secretariat
- Dr. Taufiqul Islam, Operations Manager, IEOM Society International
- Mahir Ahmad Faysal, Associate Operations Manager
Track Chairs
Artificial Intelligence
- Dr. Mohd Faridh B. Ahmad Zaharuddin, Universiti Teknologi Malaysia
- Associate Professor Dr. Adnan Bin Hassan, Universiti Teknologi Malaysia
Automation and Agility
- Dr. Mohd Faridh B. Ahmad Zaharuddin, Universiti Teknologi Malaysia
Automotive Manufacturing Systems
- Ts. Dr. Muhd Ikmal Isyraf Bin Mohd Maulana, Universiti Teknologi Malaysia
- Ir. Dr. Azman Bin Abas, , Universiti Teknologi Malaysia
Business Management
- Ms Tengku Shahraniza Tengku Abdul Jalal, Multimedia University, Malaysia
Case Studies
- Associate Professor Dr. Tuty Asma Binti Abu Bakar, Universiti Teknologi Malaysia
Cellular Manufacturing
- Professor Dr. Muhamad Zameri Bin Mat Saman, Universiti Teknologi Malaysia
CAD, Applications and Computing
- Ts. Zulkepli Bin Haji Muhamad, Universiti Teknologi Malaysia
- Khidzir Bin Zakaria, Universiti Teknologi Malaysia
Construction Management
- Dr Ihfasuziella Ibrahim, CREAM, CIDB, Malaysia
Cyber Security
- Dr Noor Farizah Ibrahim, Universiti Sains Malaysia
Data Analytics / Business Analytics
- Ts. Ir. Dr. Nor Hasrul Akhmal Bin Ngadiman, Universiti Teknologi Malaysia
Decision Sciences
- Wan Nazdah Bte Wan Hussin, Universiti Teknologi Malaysia
Design and Analysis
- Associate Professor Dr. Aini Zuhra Binti Abdul Kadir, Universiti Teknologi Malaysia
- Associate Professor Dr. Norizah Bt Hj Redzuan, Universiti Teknologi Malaysia
Energy
- Dr. Foo Jin Hoe, Universiti Teknologi Malaysia
- Dr. Mohd Zamri Bin Mohd Yusop, Universiti Teknologi Malaysia
- Dr. Nor Akmal Binti Fadil, Universiti Teknologi Malaysia
Engineering Education
- Associate Professor Dr. Syed Ahmad Helmi Bin Syed Hassan, Universiti Teknologi Malaysia
Engineering Management
- Associate Professor Ts. Dr. Muhamad Azizi Bin Mat Yajid, Universiti Teknologi Malaysia
Environmental Systems Engineering
- Dr. Mohd Firdaus Bin Mohd Taib, Universiti Teknologi Malaysia
Financial Engineering
- Dr. Rozlina Bte Md. Sirat, Universiti Teknologi Malaysia
Healthcare Operations and Services
- Associate Professor Dr. Aini Zuhra Binti Abdul Kadir, Universiti Teknologi Malaysia
Human Factors and Ergonomics
- Dr. Mohd Firdaus Bin Mohd Taib, Universiti Teknologi Malaysia
- Dr. Rozlina Bte Md. Sirat, Universiti Teknologi Malaysia
Industrial Services
- Dr. Joseph Ogundu, Emerald Global Consulting, Southfield, Michigan
Information Systems and Management
- Dr. Farouq Alhourani, University of Tampa, Florida
Innovation
- Dr. Gilson Ditzel Santos, Universidade Tecnológica Federal do Paraná (UTFPR), Pato Branco, Brazil
- Ts. Dr. Muhd Ikmal Isyraf Bin Mohd Maulana, Universiti Teknologi Malaysia
Inventory Management
- Dr. Salvatore Miranda, University of Salerno, Italy
Lean
- Dr. Faranak Fathi Aghdam, FCA), Michigan
- Ts. Dr. Muhd Ikmal Isyraf Bin Mohd Maulana, Universiti Teknologi Malaysia
Logistics
- Dr. Shahram Taj, Florida Polytechnic University
- Associate Professor Dr. Azanizawati Bt Ma’aram, Universiti Teknologi Malaysia
Manufacturing
- Dr. Ramy Harik, University of South Carolina, Columbia, South Carolina
- Dr. Mohd Azlan Bin Suhaimi, Universiti Teknologi Malaysia
- Ts. Rozaimi Bin Mohd Saad, Universiti Teknologi Malaysia
Mathematical Modeling/Heuristics
- Dr. Aidin Delgoshaei, University of Kharazmi, Iran
Modeling and Simulation
- Dr. Mohammad Dehghani, Northeastern University, Boston, Massachusetts
- Dr. Ali ElKamel, University of Waterloo, Canada
- Professor Dr. Wong Kuan Yew, Universiti Teknologi Malaysia
Operations Management
- Hans-Jürgen Sebastian, Institut für Wirtschaftswissenschaften, RWTH Aachen, Aachen, Germany
- Dr. Amr Elbadan, University of Business and Technology, Jeddah, Saudi Arabia
- Professor Dr. Mohd Hasbullah B Hj. Idris, Universiti Teknologi Malaysia
- Professor Dr. Wong Kuan Yew, Universiti Teknologi Malaysia
- Dr. Engku Mohamad Nazim Engku Abu Bakar, Universiti Teknologi Malaysia
- Dr Mohd Kamarul Irwan Abdul Rahim, Universiti Utara Malaysia
Operations Research
- Dr. Qipeng Phil Zheng, University of Central Florida
- Dr. Azadeh Maroufmashat, Univ. of Waterloo
- Wan Nazdah Bte Wan Hussin, Universiti Teknologi Malaysia
Optimization
- Dr. Mahdi Fathi, Mississippi State University
- Dr. Uday M. Basheer Al-Naib, Universiti Teknologi Malaysia
- Dr. Wan Fahmin Faiz Bin Wan Ali, Universiti Teknologi Malaysia
Product Lifecycle Management (PLM)
- Dr. Bill Edwards, Oakland University, Rochester, MI
- Md Tanbiruj Jaman, AGCO Corp., Hesston, Kansas
- Professor Dr. Safian Bin Sharif, Universiti Teknologi Malaysia
Production Engineering
- Dr. José Lázaro Ferraz, Engineering College of Sorocaba – BRAZIL
- Ts. Dr. Muhd Ikmal Isyraf Bin Mohd Maulana, Universiti Teknologi Malaysia
Production Planning and Management
- Dr. Edmund L. Ijumba, Evergreen Packaging, Memphis, Tennessee
- Associate Professor Dr. Syed Ahmad Helmi Bin Syed Hassan, Universiti Teknologi Malaysia
Project Management
- Dr. Arun Nambiar, California State University, Fresno, California
- Afshan Roshani, Permasteelisa North America, Windsor, Connecticut
- Ts. Zulkepli Bin Haji Muhamad, Universiti Teknologi Malaysia
Quality
- Dr. Andy Pandian, Saginaw Valley State University (SVSU), Saginaw Valley, Michigan
- Professor Dr. Noordin Bin Mohd Yusof, Universiti Teknologi Malaysia
- Ts. Ir. Dr. Nor Hasrul Akhmal Bin Ngadiman, Universiti Teknologi Malaysia
- Dr. Abdillah Sani Bin Mohd Najib, Universiti Teknologi Malaysia
- Dr Edly Ferdin Ramly, EFR Certification, Johor, Malaysia
Reliability
- Dr. Seyed A. Niknam, Western New England University, Springfield, Massachusetts
Sensors and Sensing
- Dr. Mukti Rana, Delaware State University, Dover, Delaware
Six Sigma
- Saso Krstovski, Ford Motor Company, Sterling Heights, Michigan
- Ts. Dr. Muhd Ikmal Isyraf Bin Mohd Maulana, Universiti Teknologi Malaysia
Supply Chain / Supply Chain Sustainability / Green Supply Chain
- Associate Professor Dr. Azanizawati Bt Ma’aram, Universiti Teknologi Malaysia
Sustainability
- Dr. Amarjit Singh, University of Hawaii at Manoa, Honolulu, Hawaii
- Professor Dr. Izman Bin Sudin, Universiti Teknologi Malaysia
Sustainable Manufacturing
- Dr. Omar Ashour, Penn State Behrend, Erie, PA
- Professor Dr. Muhamad Zameri Bin Mat Saman, Universiti Teknologi Malaysia
Statistical Process Monitoring
- Dr. Mojtaba Pasha, University of Calgary, Canada
- Mr Hood Atan, Energy Management Training PLT, Johor, Malaysia
Statistics
- Dr. Arjun K. Gupta, Bowling Green State University, Bowling Green, Ohio
Systems Dynamics
- Dr. Mahdi Bastan, University of Eyvanekey, Iran
Systems Engineering
- Dr. Wilkistar Otieno, Univ. of Wisconsin – Milwaukee
Technology Management
- Dr. Masoud Rahiminezhad Galankashi,
- Associate Professor Dr. Norhayati Bt Ahmad, Universiti Teknologi Malaysia
- Dr Mohd Hazim Mohamad Amini, Universiti Malaysia Kelantan
Transportation and Traffic
- Dr. Abbas Mahmoudabadi, Mehrastan University, Gilan, Iran
Competition Chairs
Undergraduate Student Paper Competition Sponsored by SIEMENS
- Eko Setiawan, ST, MT, Ph.D., Head of Industrial Engineering Study Programme, Universitas Muhammadiyah Surakarta, Indonesia
- Dr. Ratna Purwaningsih, ST., MT., Head of Industrial Engineering Department, Universitas Diponegoro, Semarang, Indonesia
- Ts. Ir. Dr. Nor Hasrul Akhmal Bin Ngadiman, Universiti Teknologi Malaysia
- Dr. Mohd Azlan Bin Suhaimi, Universiti Teknologi Malaysia
- Dr. Nor Akmal Binti Fadil, Universiti Teknologi Malaysia
Graduate Student Paper Competition Sponsored by EATON Corporation
- Dr. Eng. Desto Jumeno, ST, MT, Head of Master Program in Industrial Engineering, Universitas Andalas, Padang, Indonesia
- Ts. Dr. Muhd Ikmal Isyraf Bin Mohd Maulana, Universiti Teknologi Malaysia
- Dr. Mohd Faridh B. Ahmad Zaharuddin, Universiti Teknologi Malaysia
- Dr. Abdillah Sani Bin Mohd Najib, Universiti Teknologi Malaysia
Master Thesis Competition Chairs
- Dr. Eko Pujiyanto, S.Si, MT, Head of Master Program in Industrial Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
- Dr. Jafri Mohd. Rohani, Universiti Teknologi Malaysia
- Associate Professor Dr. Norizah Bt Hj Redzuan, Universiti Teknologi Malaysia
- Ts. Dr. Muhd Ikmal Isyraf Bin Mohd Maulana, Universiti Teknologi Malaysia
- Dr. Mohd Faridh B. Ahmad Zaharuddin, Universiti Teknologi Malaysia
- Dr. Abdillah Sani Bin Mohd Najib, Universiti Teknologi Malaysia
Doctoral Dissertation Competition Chairs
- Nur Aini Masruroh, ST., M.Sc., Ph.D, Department of Industrial Engineering, Universitas Gadjah Mada (UGM), Yogyakarta, Indonesia
- Dr. Mehran Doulat, Center for Quality and Sustainability, School of Engineering and Advanced Technology, UTM Kuala Lumpur, Malaysia
- Professor Dr. Wong Kuan Yew, Universiti Teknologi Malaysia
Senior Capstone Design Project / FYP Poster Competition Chairs
- Fitra Lestari, Ph.D., Head of Industrial Engineering Study Programme, UIN Sultan Syarif Kasim, Indonesia
- Dr. M. Shamsuzzaman, University of Sharjah, UAE
- Wan Nazdah Bte Wan Hussin, Universiti Teknologi Malaysia
- Ts. Rozaimi Bin Mohd Saad, Universiti Teknologi Malaysia
- Dr. Mohd Zamri Bin Mohd Yusop, Universiti Teknologi Malaysia
Undergraduate Research Competition Chairs
- Dr. Eko Liquiddanu, ST, MT, Head of Industrial Engineering Study Programme, Universitas Sebelas Maret, Surakarta, Indonesia
- Dr. Singgih Saptadi, ST., MT, Head of Industrial Engineering Study Programme, Universitas Diponegoro, Semarang, Indonesia
- Ts. Ir. Dr. Nor Hasrul Akhmal Bin Ngadiman, Universiti Teknologi Malaysia
- Dr. Mohd Azlan Bin Suhaimi, Universiti Teknologi Malaysia
- Dr. Nor Akmal Binti Fadil, Universiti Teknologi Malaysia
Lean Six Sigma Competition Chairs
- Dr. Dra. Hennie Husniah, M.T., Dean, Faculty of Engineering, Langlangbuana University, Bandung, Indonesia
- Dr. Dra. Amelia Santoso M.T., Head of Master Program in Industrial Engineering, Universitas Surabaya, Surabaya, Indonesia
- Assoc. Prof. Dr. Adnan Hassan, Universiti Teknologi Malaysia
- Ts. Dr. Muhd Ikmal Isyraf Bin Mohd Maulana, Universiti Teknologi Malaysia
Simulation Competition Chairs
- Nurhadi Siswanto, S.T., MSIE., Ph.D, Institut Teknologi Sepuluh November (ITS), Surabaya, Indonesia
- Dr. Rohaizan Ramlan, Universiti Tun Hussein Onn Malaysia
Supply Chain and Logistics Competition Chairs
- Dr. Azanizawati Ma’aram; Universiti Teknologi Malaysia
Human Factors and Ergonomics Competition
- Ing. Novie Susanto, S.T., M.Eng, Department of Industrial Engineering, Universitas Diponegoro
- Dr. Mohd Firdaus Bin Mohd Taib, Universiti Teknologi Malaysia
- Dr. Rozlina Bte Md. Sirat, Universiti Teknologi Malaysia
Poster Competition Chairs
- Dr. Indri Hapsari, S.T., M.T., Head of Industrial Engineering Study Programme, Universitas Surabaya, Surabaya, Indonesia
- Dr. Henny, ST., M.T., Head of Industrial Engineering Study Programme, Universitas Komputer Indonesia, Bandung, Indonesia
Global Engineering Education Committee
- Dr. Abu Masud, Boeing Global Engineering Professor, Industrial and Manufacturing Engineering Department, Wichita State University, Kansas, USA
- Dr. Hamid Parsaei, Texas A&M University (College Station) and Qatar
- Dr. Mukondeleli Grace Kanakana, University of South Africa
- Dr. Syed Ahmad Helmi Al Haddad, Associate Fellow, Center for Engineering Education (CEE), Universiti Teknologi Malaysia, Skudai, Johor, Malaysia
- Dr. Mehmet Savsar, Professor, Department of Industrial and Management Systems Engineering, Kuwait University, Safat, Kuwait
- Dr. Vitor M. Caldana, Professor, Depto. de Eletroeletrônica, IFSP – Instituto Federal de São Paulo – Campus Sorocaba, SP, Brazil
- Associate Professor Dr. Jafri Mohd Rohani, Universiti Teknologi Malaysia
- Dr. Chan Chee-Ming, Associate Professor and Deputy Dean (Academic and Research), Universiti Tun Hussein Onn Malaysia
- Dr. Ilham Kissani, Faulty of Engineering & Management Science, Al Akhawayn University, Ifrane, Morocco
- Dr. Ho Hwi Chie, Bina Nusantara University (Binus), Indonesia
- Dr. Rosemary Seva, De La Salle University – Manila, Philippines
- Dr. Jihong Yan, Professor in Industrial Engineering and Deputy Dean of School of Mechatronics Engineering, Head of intelligent Manufacturing Scientific Research Team, Harbin Institute of Technology, Harbin, China
Industry Solutions Committee
- Natasha Dzulkarnain, Construction Research Institute of Malaysia
- Dr. Kenichi Funaki, Hitachi, Yokohama, Japan
- Ihfasuziella Ibrahim, Construction Research Institute of Malaysia (CREAM)
- Hwa Kooi Kok, Intel Malaysia
- Masaru Tezuka, Hitachi Solutions East Japan, Ltd., Japan
- Dr Edly Ferdin Ramly, EFR Certification, Johor, Malaysia
Woman in Industry and Academia (WIIA) Committee
- Dr. Chan Chee-Ming, Associate Professor and Deputy Dean (Academic and Research), Universiti Tun Hussein Onn Malaysia
- Dr. Stefanie Pillai, Dean and Associate Professo, Faculty of Languages & Linguistics, University of Malaya, Kuala Lumpur, Malaysia
- Dr. Adibah Shuib, Head of Strategic Planning (Monitoring), Centre for Strategic Planning,Universiti Teknologi MARA (UiTM)
- Associate Professor Dr. Aini Zuhra Binti Abdul Kadir, Universiti Teknologi Malaysia
Technical Committee
- Dr. Arundhati Guha Thakurta, Ergonomics and Human Factors Specialist, Assistant Professor, School of Design (SOD), Narsee Monjee College of Management Studies(NMIMS), Mumbai, India
- Dr. Javad Khamisabadi, Islamic Azad University, Tehran, Iran
- Dr. A.O. Adewumi, University of KwaZulu-Natal, South Africa
- Dr. Abdelaziz Berrado, The Ecole Mohammadia d’Ingénieurs (EMI), Rabat, Morocco
- Dr. Aidin Delgoshaei, Industrial Engineering Department, Kharazmi University, Tehran, Iran
- Dr. Abderrahmane Mellak, University of Boumerdes, Algeria
- Dr. Abdollah Aghaie, K.N. Toosi University of Technology, Iran
- Dr. Abdul-Rahman Al-Ali, American University of Sharjah, UAE
- Dr. Abdussalam Shibani, Coventry University, UK
- Dr. Ahmed Kadhim Hussein, Babylon University, Iraq
- Dr. Amir Azizi, Universiti Malaysia Pahang, Malaysia
- Dr. Andi Cakravastia, ST, MT, Institut Teknologi Bandung, Indonesia
- Dr. Anwar, Universitas Malikussaleh, Aceh, Indonesia
- Dr. Arun N. Nambiar, California State University – Fresno, USA
- Dr. Balan Sundarakani, University of Wollongong in Dubai, UAE
- Dr. Behnam Bahrami, Eastern Mediterranean University, Famagusta, Cyprus
- Dr. Bhuvenesh Rajamony, University Malaysia Perlis (UniMAP), Malaysia
- Dr. Brigitte Jaumard, Concordia University, Canada
- Dr. Carles Sitompul, Universitas Parahyangan, Bandung, Indonesia
- Dr. Cecilia Nembou, Divine Word University, Papua New Guinea
- Dr. Faieza Abdul Aziz, Universiti Putra Malaysia, Selangor, Malaysia
- Dr. Fernando González Aleu, Universidad de Monterrey, Mexico
- Dr. Francis Leung, City University of Hong Kong, China
- Dr. Fulufhelo Masithulela, University of South Africa
- Dr. Gopalan Srinivasan, University of New Brunswick, Canada
- Dr. Haider Ali Biswas, Khulna University, Bangladesh
- Dr. Hui-Ming Wee, Chung Yuan Christian University, Taiwan
- Dr. Indra Gunawan, The University of Adelaide, Australia
- Dr. Ing. Novie Susanto,ST, M. Eng, Universitas Diponegoro, Indonesia
- Dr. Ir. Rakhma Oktavina, MT, Universitas Gunadarma
- Dr. Ir. Rosnani Ginting, MT, Universitas Sumatera Utara, Medan, Indonesia,
- Dr. Jahara bint Ghani, UKM, Malaysia
- Dr. Jayakanth Srinivasan, MIT Sloan School of Management,
- Dr. Kannan Govindan, University of Southern Denmark, Denmark
- Dr. Kondo H. Adjallah, Paul-Verlaine University, France
- Dr. Lamto Widodo, ST., MT, Universitas Tarumanegara, Jakarta, Indonesia
- Dr. Linda L. Zhang, IESEG School of Management, Lille-Paris, France
- Dr. Mahdi Bashiri, Shahed University, Iran
- Dr. Mahmood Shafiee, Cranfield University, Bedfordshire, United Kingdom
- Dr. Maruf Hasan, University of New South Wales, Australia
- Dr. Md. Abdus Samad Kamal, Gunma University, Kiryu, Japan
- Dr. Md. Mamun Habib, Independent University, Bangladesh
- Dr. Md. Mizanur Rahman, Universiti Malaysia Sabah (UMS), Kota Kinabalu, Sabah, Malaysia
- Dr. Mehran Doulat, Center for Quality and Sustainability, School of Engineering and Advanced Technology, UTM Kuala Lumpur, Malaysia,
- Dr. Meilita Tryana Sembiring, ST, MT, Universitas Sumatera Utara, Medan, Indonesia
- Dr. Michael Mutingi, University of Botswana, Botswana
- Dr. Miguel Sanz Bobi, Comillas Pontifical University, Spain
- Dr. Mohammad Ishak Desa, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
- Dr. Mohd Abdur Rashid, University Malaysia Perlis (UniMAP), Malaysia,
- Dr. Murat Caner Testik, Hacettepe University, Ankara, Turkey
- Dr. Nani Kurniati, Institute of Technology Sepuluh Nopember (ITS), Surabaya, East Java, Indonesia
- Dr. Naniek Utami Handayani, S.Si, MT, Universitas Diponegoro, Semarang, Indonesia
- Dr. Nejib Chouaibi, Polytechnic School of Tunisia, Tunisia
- Dr. Norhamidi Muhamad, UKM, Malaysia
- Dr. Norzaidahwati Zaidin, Universiti Teknologi Malaysia, Johor, Malaysia
- Dr. Nubia Milena Velasco Rodriguez, Universidad de Los Andes, Colombia
- Dr. Omar Elmabrouk, Benghazi University, Libya
- Dr. P. Sanjeevikumar, CTiF Global Capsule, Aarhus University, Denmark
- Dr. Raja Kothandaraman, Alpha College of Engineering, Chennai, Tamilnadu, India
- Dr. Raja Zuraidah Raja Mohd Rasi, Universiti Tun Hussein Onn Malaysia
- Dr. Ramy Harik, University of South Carolina, USA
- Dr. Rashmi Jha, Gitarattan International Business School (GIBS), Affiliated to Guru Gobind Singh Indraprastha University, New Delhi, India
- Dr. Ratri Parida, National Institute of Construction Management and Research (NICMAR), Pune, Maharashtra, India
- Dr. Ravi Gor, St. Kabir Institute of Professional Studies, Ahmedabad, India,
- Dr. Rina Fitriana,ST,MM,IPM, Department of Industrial Engineering, Universitas Trisakti, Indonesia
- Dr. Rodrigo Garrido, Universidad Adolfo Ibaez, Chile
- Dr. Ruchi Mishra, Institute of Management, Nirma University, Ahmedabad, India
- Dr. Salah Haridy, Department of Industrial Engineering and Engineering Management, University of Sharjah, Sharjah, UAE
- Dr. Sarbjit Singh, National Institute of Technology, Jalandhar, Punjab, India
- Dr. Sawat Pararach, Thammasat University, Thailand
- Dr. Shahrul B. Kamaruddin, Universiti Sains Malaysia
- Dr. Shahryar Sorooshian, University Malaysia Pahang, Malaysia
- Dr. Suat Kasap, Industrial Engineering, American University of the Middle East, Kuwait
- Dr. Suhaiza Hanim Zailani,University Malaya, Malaysia
- Dr. Syed Asif Raza, Qatar University, Qatar
- Dr. T. Ramayah, School of Management, Universiti Sains Malaysia
- Dr. Tanika D Sofianti, Industrial Engineering Dept., Engineering Faculty, Swiss German University BSD City Kav. Tangerang, Banten, Indonesia
- Dr. Theodore B. Trafalis, University of Oklahoma, USA
- Dr. Titah Yudhistira, ST, MT, Institut Teknologi Bandung, Indonesia
- Dr. Vassilis Gerogiannis, Department of Project Management, Greece
- Dr. Vladimir Beresnev, Sobolev Institute of Mathematics, Russia
- Dr. Vladimir I. Tsurkov, Russian Academy of Sciences, Moscow, Russia
- Dr. Vladimir Modrak, TUKE, Slovakia
- Dr. Yong Yin, Yamagata University, Japan
- Dr. Yosi Agustina Hidayat, ST, MT, Institut Teknologi Bandung, Indonesia
- Dr. Yuan Xue Ming, SIMTech: Singapore Institute of Manufacturing Technology, Singapore
- Dr. Zuraidah Sulaiman, Universiti Teknologi Malaysia (UTM), Johor, Malaysia
- Dr. D. K. Banwet, IIT-Delhi, India
- Eko Setiawan, ST, MT, Ph.D, Universitas Muhammadiyah Surakarta,
- Jonrinaldi, ST, MT, Ph.D, Universitas Andalas, Padang, Indonesia
- Markus Hartono, S.T., M.Sc., Ph.D, CHFP, Universitas Surabaya, Indonesia
- Nurhadi Siswanto, S.T., MSIE., Ph.D, Institut Teknologi Sepuluh November, Surabaya, Indonesia
- Prof. Dr. Anand Kumar, M.S. Engineering College, Bangalore Karnataka, India
- Dr. Taufiq Immawan, S.T., M.M., Department of Industrial Engineering, Universitas Islam Indonesia, Yogyakarta, Indonesia
- Dr. Ir. Halim Mahfud, M.Sc, Department of Industrial Engineering, UPN Veteraran Jakarta, Indonesia
- Yun Arifatul Fatimah, M.T., Ph.D., Department of Industrial Engineering, Universitas Muhammadiyah Magelang, Indonesia, Yogyakarta, Indonesia
- Andi Sudiarso, S.T., M.T., M.Sc., Ph.D. Universitas Gadjah Mada (UGM), Yogyakarta, Indonesia
- Dr. Arian Dhini, ST, MT., Dept. of Industrial Engineering Universitas Indonesia
- Dr.Eng. Ir. Irma Nur Afiah, ST.,MT.,IPM.,ASEAN Eng. Department of Industrial Engineering, Universitas Muslim Indonesia, Makassar, Indonesia
- Dr. Wahyuda, Dept. of Industrial Engineering, Universitas Mulawarman
- Dr. Ir. Adrian Nur, S.T., M.T., University Centre of Excellence for Electrical Energy Storage Technology, Universitas Sebelas Maret, Surakarta, Indonesia
- Dr. Eng. Hendri Widyandari, University Centre of Excellence for Electrical Energy Storage Technology, Universitas Sebelas Maret, Surakarta, Indonesia
- Retno Tanding Suryandari, Ph.D., Master in Management (MM) Study Program, Universitas Sebelas Maret, Surakarta, Indonesia
- Didiek Sri Wiyono, ST, MT, Ph.D, Department Computer Science, Universitas Sebelas Maret, Surakarta, Indonesia
- Dr. Fethma M Nor, Department of Mechanical Engineering, Curtin University, Malaysia
- Assoc. Prof. Ts. Dr. Muhammad Azizi Mat Yajid, Director (Materials, Manufacturing & Industrial Engineering, Universiti Teknologi Malaysia, Malaysia
- Dr. Auditya Purwandini Sutarto, S.T., M.Si., Department of Industrial Engineering, University of Qomaruddin Gresik, Indonesia
- Dr. Leo Aldianto MBA, MSAE, School of Business and Management, Institut Teknologi Bandung, Indonesia
- Abroon Qazi, Ph.D., Fellow Society of Actuaries | Chartered Enterprise Risk Analyst, Assistant Professor, Department of Marketing & Information Systems, School of Business Administration (AACSB accredited), American University of Sharjah, United Arab Emirates