Proceedings – Fourth Indian Conference on Industrial Engineering and Operations Management
November 7-9, 2024, Hyderabad, Telangana, India
ISSN: 2169-8767 (U.S. Library of Congress) ISBN: 979-8-3507-1739-6
Gunderaya S, Qutubuddin Syed Mohammed, Saniya Naik, Laxmi S. and Veeresh S Patil, PDA College of Engineering, Kalaburagi, India
ID 13 Monte-Carlo Simulation of a Single Tiered Supply Chain with Total Cost Minimization Objective
Adarsh Uday, B. Tech Student in Mechanical Engineering, Indian Institute of Technology, Madras, India
Uday K Jagannathan, PhD, Associate Professor, Ramaiah University of Applied Sciences, Bengaluru, India
Fabricio Antonio Delgado-Garces, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Jefferson Wilson Jalire-Machicado, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
ID 16 Implementing a Lean Production Model to Increase OTIF Rate: A Case Study in Textile SMEs
Edgard Renato Navarro-Huamani, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Gerald Alexis Salazar-Vega, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
ID 17 A Lean Production Model to Enhance Operational Efficiency in Textile SMEs: A Case Study
Daniel Mercado-Seguil, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
José Enrique Mamani-Chávez, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Jaime Fabricio Elorrieta-Ordoñez, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Martín Ivan Guevara-Cardozo, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Adrian Coronel-Justo, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Salvador Alonso Vera-Padilla, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
ID 20 Blockchain-Enabled Logistics and Operations Management for Traceability and Sustainability
Sudarshan Gnanavendan and Jayakrishna Kandasamy, Department of Manufacturing Engineering, School of Mechanical Engineering, VIT University, Vellore Campus, Tamil Nadu 632014, India
Dr. Subhadeep Mukherjee, Assistant Professor, Faculty of Management & Commerce, Ramaiah University of Applied Sciences, India
Mr. Subham Das, Mr. Divyeshkumar Kansara, Mr. Pratyush Pushpam, Mr. Pulkit Sethiya, Mr. Arif Khan, Mr. Nagaraj M, Ms. Anushka Gupta, Ms. A. Afra Khannum, Ms. Jyoti Sharma, Ms. Husna Kauser and Ms. Roshni Naidu, MBA 4th Sem, Faculty of Management & Commerce, Ramaiah University of Applied Sciences, India
Yoshan Akira Yseki-Paucar, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Jorge Mauricio Miller-Espejo, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Ana Paula Neyra-Chonate and Renato Ricardo Robello-Nemi, Facultad de Ingeniería, Universidad de Lima, Peru
Román Manuel Balta-Mansilla, Research Professor, Facultad de Ingeniería, Universidad de Lima, Peru
ID 24 Applications of Artificial Intelligence Algorithms in Wind Speed
Ali AlArjani, Industrial Engineering Department, College of Engineering, Prince Sattam Bin Abdulaziz University, AlKharj, Saudi Arabia
Salvatore Balza Tassara-Chumbiauca, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Mateo Rodrigo Gordillo-Egúsquiza, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
ID 45 Inventory Management of Spare Parts in the Ready-to-Eat Food Manufacturing Industry
Tapanut Sudjai, School of Industrial Engineering, Suranaree University of Technology, Nakhon Ratchasima, Thailand
Phongchai Jittamai, School of Industrial Engineering, Suranaree University of Technology, Nakhon Ratchasima, Thailand
Tapanut Sudjai, Phongchai Jittamai School of Industrial Engineering, Suranaree University of Technology, Nakhon Ratchasima, Thailand
ID 46 Role of Sustainable Commuting Option in Enhancing Employee Well-being
Dr. Jisha Gopi, Assistant Professor, CET School of Management, College of Engineering Trivandrum, India
Mr. Harisankar V, Student, CET School of Management, College of Engineering Trivandrum, India
Carlos Ignacio P. Lugay Jr., UST Industrial Engineering Faculty Member, Department of Industrial Engineering, University of Santo Tomas (UST), Manila, Philippines
Regina Marie D. Belino, Andrea Nicolle Q. Roque, Kret Lemmor E. Santiago and Jose Jemuel T. Taniegra, 4th Year Industrial Engineering Students, Department of Industrial Engineering, University of Santo Tomas (UST), Manila, Philippines
Yoshiki B. Kurata, Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, Manila, Philippines
Ronna Charissa A. Cañete, John Timothy P. De Jesus, Anette Grace O. Padrinao and Miguel Joshua F. Quema, Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, Manila, Philippines
Carlos Ignacio P. Lugay Jr., PhD, PIE, ASEAN ENGR., UST Faculty of Engineering Faculty Member, Department of Industrial Engineering University of Santo Tomas (UST), Manila, Philippines
Garcia, Emerose Marian G., Solomon, Khyl Gabriel L., Tolosa, Danelle Jana G., Zenarosa and Duane Patrick G., 4th Year Faculty of Engineering Students, Department of Industrial Engineering, University of Santo Tomas (UST), Manila, Philippines
Prof. Carlos Ignacio P. Lugay Jr., PhD, PIE, ASEAN Engr., UST Industrial Engineering Faculty Member, Department of Industrial Engineering, University of Santo Tomas (UST), Manila, Philippines
Danilo A. Cristobal Jr., Alyssa Yzabel D. Monteagudo, Adrian S. Naval and Brylle Gever E. Vinluan, 4th Year Industrial Engineering Students Department of Industrial Engineering, University of Santo Tomas (UST), Manila, Philippines
Sadiya Ansari, Mudassir Amaan Ansari and Furqan Ahmed Ahad Shaikh, Department of Artificial Intelligence and Data Science, Anjuman College of Engineering and Technology, Nagpur, Maharashtra, India
Shantanu Patne, Sheikh Saniya Kousar, Sharon Joseph and Mohsin Ahamed Abdul Salam Malik, Department of Electronics and Telecommunication, Anjuman College of Engineering and Technology, Nagpur, Maharashtra, India
Nabeel Khan, Department of Electrical Engineering, Anjuman College of Engineering and Technology, Nagpur, Maharashtra, India
Mohd Arshan Sheikh, Department of Computer Science, Anjuman College of Engineering and Technology, Nagpur, Maharashtra, India
ID 57 The Adoption of Big Data Analytics by SMEs: A Review Paper
Lawrance Seseni, College of Business and Economics, School of Management, Department of Business Management, University of Johannesburg Auckland Park, South Africa
Ramanath Kopparam Suryaprakash, MS, MBA, Ph.D. Candidate, Business Management, Bharatiya Engineering Science & Technology Innovation University (BESTIU), India
Frantz Pacheco Oropeza, Dilan Urruchi Villegas and Richard Meza-Oritz, Facultad de Ingeniería. Universidad de Lima, Lima, Perú
Dr Vivek Soni, Faculty of Management Studies, University of Delhi, India
Banwet D.K., Emeritus Fellow, IIT Delhi and IIM Jammu, India
Praveen Nelanti, Ph.D. Scholar, Organizational Psychology, Bharatiya Engineering Science & Technology Innovation University (BESTIU), Gownivaripalli, Gorantla, Andhra Pradesh, India
Swathi Shavva, (Research scholar- Best innovation University- Food science and Nutrition -2022 batch, Andrapradesh, Ananthapur, Senior clinical dietician, Continental Hospitals, Hyderabad, India
Aiswarya Raj PR Chief clinical dietician, Continental Hospitals, Hyderabad, India
ID 72 Studies on Two Line Resolution With 2п Defocus
Amaranath M, Research Scholar, BEST Innovation University, Gorantla, A.P 515231 and Asst. Professor, Annamacharya Institute of Technology and Sciences, Hyderabad, India
Krishnaiah G, Research Scholar, BEST Innovation University, Gorantla, A.P 515231, India
D. Sadanandam, Research Scholar, BEST Innovation University, Gorantla, A.P 515231 and Asst. Professor, Shadan College of Engineering and Technology, Hyderabad, India
Raghupathi P, Assistant Professor, Department of Physics, Anurag University, Hyderabad – 500088, Telangana, India
Kiran Kumar T, Assistant Professor, Department of Physics, Brilliant Institute of Engineering and Technology, Hyderabad, India
ID 73 Exploring Work Life Balance if Migratory Labors in the Industrial Sector (Telangana)
Kavitha Kotte (PhD), Pursuing PhD in BEST Innovation University, Mandrol Lakeside Campus, Sri Satya Sai District, Andhra Pradesh – 515231, India, Assistant Professor, Pallavi Engineering College, Nagol, Hyderabad, India
Dr. A. Kotishwar, Professor, Head of the Department, Mba Department, CMR College Of Engineering & Technology, Hyderabad, India
ID 77 Static Muscular Strength and Prevalence of MSD Among Glass Artware Workers
Bhawana Rathore, Indian Institute of Management Sambalpur, India
Nagaraju Devara, Depart of Business Management, Bharatiya Engineering Science and Technology Innovation University (BESTIU), Anantapur, Andhra Pradesh–515731, India
Dr. G. Ramanjaneyulu, Associate Professor and HOD, Department of Business Administration, Annamacharya Institute of Technology and Sciences (Autonomous), Kadapa, Andhra Pradesh -516001, India
M.Arundhathi Reddy, Research Scholar of BEST, Department of Business Management, BEST Innovation University Head Quarters, Gownivaripalli, Gorantla, Andhra Pradesh, India
G. Ramanjaneyulu, Associate Professor and HOD, Department of Business Administration, Annamacharya Institute of Technology and Sciences (Autonomous), Kadapa, Andhra Pradesh -516001, India
Anusha Thoutreddy, Research Scholar of BESTIU, Department of Business Management, BEST Innovation University Head Quarters, Gownivaripalli, Gorantla, Andhra Pradesh, India
Dr. G.Ramanjaneyulu, Associate Professor and HOD, Department of Business Administration, Annamacharya Institute of Technology and Sciences (Autonomous), Kadapa, Andhra Pradesh -516001, India
Aparna Nemalikanti Registered Dietician, Research Scholar, BEST Innovation University Head Quarters, Gownivaripalli, Gorantla, Andhra Pradesh, India
Bushra Siddiqua, PG Scholar, Department of Computer Science and Engineering, Bharatiya Engineering Science and Technology Innovation University (BESTIU), Sri Satya, Sai, Andhra Pradesh, India
Dr. Anjaiah Adepu, Professor, Department of CSE (Hod) & Principal IC, Maulana Azad National Urdu University, A Central University, Ministry of Education, Government of India, POLYTECHNIC, DARBHANGA, Bihar-846002, India
ID 90 Review on Filtering Strategies for Enhanced ECG Signal Quality
Parleen Kaur, Research Scholar, India
ID 91 Urban Travel Demand Modelling for Indian condition using IoT-based Traffic Prediction
Ch. Usha rani, Research Scholar – Bharatiya Engineering Science and Technology Innovation University (BESTIU), Department of Computer Science, India
Dr. V. Goutham, Professor – Nalla Narasimha Reddy Education Society’s Group of institutions Hyderabad, Dept C.S.E, India
Richard Nicholas Meza Ortiz, Faculty of Industrial Engineering, Professor, School of Industrial Engineering, Member, Operations Management and Green Logistics Research Group, Industrial Engineering Career, Universidad de Lima, Santiago de Surco, Lima, Perú
Sebastian Albines and Marcia Huaricapcha, From the Faculty of Engineering, students of the Industrial Engineering Program, Universidad de Lima Santiago de Surco, Lima, Perú
ID 94 Design and Analysis of Campus Micro grid System Using MATLAB
Akkamgari Harshasri, IV Year UG EEE Student, B V Raju Institute of Technology, Narsapur, Telangana, India
G. Dhakshayani, UG Mechanical Student, B V Raju Institute of Technology, Narsapur, Telangana, India
N Bhoopal, B V Raju Institute of Technology, Narsapur, Telangana, India
Venkateswara Raju, B V Raju Institute of Technology, Narsapur, Telangana
S.Saravanan, B V Raju Institute of Technology, Narsapur, Telangana, India
Beemari Krishnaveni, J.N.Governament Polytechnic,Ramanthapur, Telangana, India
ID 95 Analysis and Development of Smoothie Advisor by using Machine Learning
Archana C, MBA Student, Ramaiah University of Applied Sciences, Bengaluru, India
Ms. Shilpa R G, Assistant Professor, Faculty of Management & Commerce, Ramaiah University of Applied Sciences, Bengaluru, India
ID 97 AI Based Smart Energy Meter
R. Anirudh Reddy, Assistant Professor, Department of Electronics and Communication Engineering, B V Raju Institute of Technology, Medak, Telangana, India
T. Vasudeva Reddy, Assistant Professor, Department of Electronics and Communication Engineering, B V Raju Institute of Technology, Medak, Telangana, India
K. Sai Prasanna, Assistant Professor, Department of Electronics and Communication Engineering, B V Raju Institute of Technology, Medak, Telangana, India
M. Sri Kiran, Department of Electronics and Communication Engineering, B V Raju Institute of Technology, Medak, Telangana, India
M. Harshini, Department of Electronics and Communication Engineering, B V Raju Institute of Technology, Medak, Telangana, India
M. Praveen, Department of Electronics and Communication Engineering, B V Raju Institute of Technology
Medak, Telangana, India
ID 98 Social Welfare Supply Chain Modelling Leveraging Smart Contracts
Satyavolu Rama Vijaya Kumar, Department of Mechanical Engineering, Andhra University College of Engineering, Andhra University (AU), Visakhapatnam, India
Prof. K. Venkata Subbaiah, Department of Mechanical Engineering, Andhra University College of Engineering, Andhra University (AU), Visakhapatnam, India
ID 99 Integrated Solar Wireless EV Charging System
Thummala Vasanth Reddy, Rokkam Lalith Rao, Rampuram Sripadh Vallabh, UG Student, B V Raju Institute of Technology, Narsapur, Telangana, India
K. Sai Prasanna, Yempally Sangeetha and R. Anirudh Reddy Assistant Professor, Department of ECE, B V Raju Institute of Technology, Narsapur, Telangana, India
Soumya Boddu, G. Krishna Mohana Rao and Vinay Vuyyuri, Department of Mechanical Engineering, JNTUH University College of Engineering, Science and Technology, Hyderabad, Telangana, India
ID 101 Meta-analysis of Cyber Threat Detection in Blockchain Networks Using Deep Learning
Imreena Ali, Research Scholar, BEST Innovation University, Anantapur, Andhra Pradesh, India
Dr. Madhu Bhukya, Associate Professor, KG Reddy College of Engineering & Technology, Lawrence Technological University, Hyderabad, India
ID 103 A Review on: 4 BIT Synchronous Counter Using CMOS 45nm Technology
B Aakhil Ahammed, Research Scholar BEST Innovation University, Gownivaripalli, A.P Lecturer in ECE Govt.Polytechnic Kamalapuram
Dr. Sk. Masthan Basha, Lecturer inECE Govt.Polytechnic Kamalapuram and Professor, Dept. of ECE, VMTW, Hyderabad.
ID 104 Criticality of Competency in Changing Workplace Dynamics – Analysis through Mediation Model
Dr. Dhruv Chopra, Human Resource Program Leader, India
D.K. Banwet, Professor Emeritus & Visiting Professor, Department of Management Studies, IIT Delhi, India
Shalini Nigam, Professor, Department of Management, Dayalbagh Educational Institute (DEI), Agra, India
ID 105 A Review on: X-band Class C Power Amplifier Using GaN HEMT Technology
M.Veeranjaneyulu, Research Scholar, BESTIU, India
Dr. SK. Masthan Basha, Research Supervisor(BESTIU) and Professor, Dept.of ECE,VMTW, Hyderabad
ID 106 A Survey on Deep Learning Approaches for Cloud Forensics Analysis
Sheena Mohammed, Assistant Professor, AI&DS Dept, Chaitanya Bharathi Institute of Technology, Hyderabad, India
Dr. R Sridevi, Professor, CSE Dept, JNTUH, Hyderabad, India
Dr. K.S Sadasiva Rao, Professor, CSE Dept and Dean R&D, Sri Indu College of Engineering and Technology, Hyderabad
Vemula Harish, Research Scholar, Jawaharlal Nehru Technological University, Hyderabad, India
Dr. R. Sridevi, Professor, JNTUH College of Engineering, Hyderabad, India
Dr. K S Sadasiva Rao, Professor in Dept. of CSE Dean R&D, Sri Indu College of Engineering and Technology, Hyderabad, India
Bandapalli Sujatha, Bharatiya Engineering Science and Technology Innovation University, Anantapur, Andhra Pradesh – 515231, India Department of Zoology, KVRGCW (A), Cluster University, Kurnool District, Andhra Pradesh – 518 003, India
Dr. M. Rajashekar, Associate professor, Dept of Zoology, palamuru University, Mahabubnagar District, Telangana, India
ID 109 Automated Email Spam Classification with TensorFlow in Python
T C Swetha Priya, Research Scholar, Faculty of CSE, Jawaharlal Nehru Technological University, Hyderabad, Telangana, India R Sridevi, Professor, Faculty of CSE, Jawaharlal Nehru Technological University, Hyderabad, Telangana, India
Dr. K S Sadasiva Rao, Professor, Department of CSE, Sri Indu College of Engineering and Technology, Hyderabad
Dr. K S Sadasiva Rao, Professor, Department of Computer Science and Engineering, Sri Indu College of Engineering and Technology, Hyderabad, Telangana, India
Sanjeeva Reddy B R, Department of ECE, B V Raju Institute of Technology, Narsapur, Medak, India
Vishnu P, Department of PHE, B V Raju Institute of Technology, Narsapur, Medak, India
Rayudu Katuri, Department of EEE, B V Raju Institute of Technology, Narsapur, Medak, India
Krishna Rao S, Department of Civil, B V Raju Institute of Technology, Narsapur, Medak, India
Bachu Yesobu, Research Scholar, Bharatiya Engineering, Science & Technology Innovation University, Gorantla, Sri Satya Sai District, Andhra Pradesh, India
Dr. M Aravind Kumar, Principal, West Godavari Institute of Science and Engineering, East Godavari District Prakashraopalem, Andhra Pradesh, India
Marcos Diaz Amaro Alberto Flores-Perez, Facultad de Ingeniería, Universidad de Lima, Lima, Perú
Almendra Salazar Carrillo, Facultad de Ingeniería, Universidad de Lima, Lima, Perú
Alberto Flores-Perez, Facultad de Ingeniería, Universidad de Lima, Lima, Perú
ID 117 The Design and Development of Metamaterial-Based Antennas for Medical Applications
Gajjela Raghunatha Reddy, Research Scholar, BEST Innovation University, Gorantla, A.P & Lecturer in ECE, Government Polytechnic, Vempalli, India
Dr. SK. Masthan Basha, Research Supervisor (BESTIU), Professor, Dept.of ECE, VMTW, Hyderabad, India
ID 118 Impact of Covid-19 on Portfolio Management of Investors in Telangana
V.V.L. Sameera, Research Scholar, Department of Management Studies, National Institute of Technology, Warangal (NITW), India
Dr. Lakshmi Tulasi Devi S, Associate Professor, Department of Management Studies, National Institute of Technology, Warangal (NITW), India
ID 119 Evaluating the Static and Dynamic Response of All-Terrain Vehicle Under Varying Conditions
Vangari Saikiran, Pundru Bhavana and Macha Yeshwanth Reddy, Department of Mechanical Engineering B V Raju Institute of Technology Narsapur, Medak, India
Dr. V. Murali Krishna and Dr. R. Muthalagu, Department of Mechanical Engineering, B V Raju Institute of Technology B V Raju Institute of Technology Narsapur, Medak, Telangana Narsapur, India
ID 120 Review of Printing Parameters on Mechanical Properties in FDM 3D Printing Process
Pundru Bhavana, Vangari Saikiran, Ghanathe Varshith and Pakala Manikanta, Department of Mechanical Engineering B V Raju Institute of Technology, India
Dr. V. Murali Krishna, Dr. R. Muthalagu, Professor and Dean of Academics, Asistant Professor, Department of Mechanical Engineering, B V Raju Institute of Technolog, Telangana Narsapur, Medak,Telangana, India
ID 121 Non-Invasive Vital Sign Monitoring System
R. Anirudh Reddy1, T. Vasu Deva Reddy1, Teakurthy Kartikeya2, Teragarla Vennela2, Yelmakuri Jagan mohan Reddy2, Saka Renuka2, Assistant Professor1, UG Student2, Department of Electronics and communication Engineering, B V Raju Institute of Technology, Narsapur, Medak, Telangana, India
S.M. Hasanuddin, Student, Methodist College of Engineering and Technology, Hyderabad, India
Ayesha Fatima, Student, Stanley College of Engineering and Technology for Women, Hyderabad, India Saheba
Saheba Aijaz, Student, Stanley College of Engineering and Technology for Women, Hyderabad, India
Qutubuddin S.M., Associate Professor, P.D.A. College of Engineering, Kalaburagi, India
Umaira Shahneen, Student, P.D.A. College of Engineering, Kalaburagi, India
ID 123 Supply Chain and Logistics in Indian Markets; Challenges and Future Scope
Vaidyam Sai Teja, Borancha Sudhakar, Katta Uday Ram, Thokala Jairam Reddy and Manzoor Hadi, Bachelors of Technology in Mechanical Engineering at BV Raju Institute of Technology, Narsapur, Telangana, India
ID 124 Operational Excellence Through Lean Six Sigma: Strategies and Best Practices
Alluri Hema Saiesha, V. Pranay Chandra and Aakash sreeraj, Student, Department of Mechanical Engineering, B V Raju Institute of Technology Narsapur 502313, Telangana, India
Mechiri Sandeep Kumar, Associate Professor, Department of Mechanical Engineering, B V Raju Institute of Technology, Narsapur 502313, Telangana, India
ID 125 Secure Database Access Management System
Anika Gauhar, Madiha.H. Khan, Suhaina Salim Gadkanoj, Mohd. Farhat Kausar Sharif and Priyanka Anil Jadhav, Student, Department of Electronics and Telecommunication Engineering, Anjuman College of Engineering and Technology, RTMN University, Nagpur, India
Dr. Ruhina Quazi, Head of Department, Department of Electronics and Telecommunication Engineering, Anjuman College of Engineering and Technology, RTM Nagpur University, Nagpur, India
ID 126 A Review on Recent Advancements in Friction Stir Additive Manufacturing
Siripuram Vivek, Korra Nagu, D Swarnalatha, K Madhukar and Y Pavan, 1Department of Mechanical Engineering, B V Raju Institute of Technology, Narsapur, Medak, Telangana 508212, India
ID 127 Optimization and Performance Analysis of Convergent Divergent Nozzles
Pallavi Billa, Nithish Kumar Chatla and Vinayak Akena, Student, Department of Mechanical Engineering, BVRIT, Narsapur, Telangana, India
Dr. K. Obula Reddy, Associate Professor, Department of Mechanical Engineering, BVRIT, Narsapur, Telangana, India
ID 128 Financial Risk Management: A Case Study in Indian Construction Industry
Hitesh Dubey, M. Tech (CTM) Student, Department of Civil Engineering, National Institute of Technology, Warangal (NITW), India
Lakshmi Tulasi Devi Surapaneni, Associate Professor, Department of Management Studies, National Institute of Technology, Warangal (NITW), India
V.V.L. Sameera, Research Scholar, Department of Management Studies, National Institute of Technology, Warangal (NITW), India
ID 129 Quality, Reliability and Maintenance in Modern Engineering Systems
Omkar Chouhan and Abhilash Neradi, Student, Department of Mechanical Engineering, B V Raju Institute of Technology, Narsapur, Telangana, India
Yathamshetti Sriram and Boddu Harish, Student, Department of Electrical and Electronics Engineering, B V Raju Institute of Technology, Narsapur, Telangana, India
Akshay Kulkarni, Associate Professor, Department of Mechanical Engineering, B V Raju Institute of Technology, Narsapur, Telangana, India
ID 137 Risk Assessment of Coal Processing Plant: An Ergonomic Perspective
Rohit Gupta, Indian Institute of Management Sambalpur, India
ID 138 A Review: Air Quality Monitoring System
Dr. Mohammad Nasiruddin, Associate Professor, Department of Electronics and Telecommunication Engineering., Anjuman College of Engineering and Technology, Nagpur, India
Charulata Nagwanshi, Uday Bhisikar, Sumeet Gajbhiye, Dhurvesh Hingnekar and Gopal Sinha, 7th Semester, Anjuman College of Engineering and Technology, Nagpur, India
ID 139 Deep Learning based Enhanced Image Captioning and Audio Description with Hybrid Model
Aruna Bagodi, PG Student, Department of Computer Science & Engineering, PDA College of Engineering, Kalaburagi, India
Jayashree Agarkhed, Professor, Department of Computer Science & Engineering, PDA College of Engineering, Kalaburagi, India
ID 140 Structural and CFD Analysis of Concentric Tube Heat Exchanger Using CuO Nanofluid
Ishrat M. Mirzana, Professor, Department of Mechanical Engineering, Mufakham Jah College of Engineering and Technology, Hyderabad Director, EWB-India
Zuriah, Department of Mechanical Engineering, Mufakham Jah College of Engineering and Technology, Hyderabad, India
ID 141 An Overview of Nature-Inspired and Swarm Intelligence Algorithms
Saniya Chheda and Shameerpet Bhavya Sree, Student, Department of Mechanical Engineering, B V Raju Institute of Technology, Narsapur 502313, Telangana, India
A. Varun and Mechiri Sandeep Kumar, Associate Professor, Department of Mechanical Engineering, B V Raju Institute of Technology, Narsapur 502313, Telangana, India
Akshaya Dandu, Mahima Kalidindi and R. Priyanka, Department of Computer Science and Engineering (AI&ML), BVRIT Hyderabad College of Engineering for Women, Hyderabad, Telangana, India
M.Phanindra Rushi, Department of Mechanical Engineering, BVRIT Narsapur, Narsapur, Telangana, India
ID 143 Digital Manufacturing, Industry 4.0 and IOT
D. Anusha, P. Akhil, Pranavi and Sai Sankar, Student, Department of Mechanical Engineering, BVRIT, Narsapur, Telangana, India.
Dr. Anil babu, Faculty, Department of Mechanical Engineering, BVRIT, Narsapur, Telangana, India
Keerthi KRD, Research Scholar, Vinod Gupta School of Management, Indian Institute of Technology, Kharagpur, West Bengal, India
Dr. Susmita Mukhopadhyay, Associate Professor, Vinod Gupta School of Management, Indian Institute of Technology, Kharagpur, West Bengal, India
ID 145 Detecting Manipulated Visuals with AI
Umaira Shahneen, Student, P.D.A. College of Engineering, Kalaburagi, India
Kafeel Kamran, Student, P.D.A. College of Engineering, Kalaburagi, India
S.M. Hasanuddin, Student, Methodist College of Engineering and Technology, Hyderabad, India
Ayesha Fatima, Student, Stanley College of Engineering and Technology for Women, Hyderabad, India
Saheba Aijaz, Student, Stanley College of Engineering and Technology for Women, Hyderabad, India
Qutubuddin S.M., Associate Professor, P.D.A. College of Engineering, Kalaburagi, India
Dr. Mohammad Nasiruddin, Associate Professor, Department of Electronics and Telecommunication, India
Gayatri.R. Bajirao, Sakshi Lade, Vedant Meshram and Krish.S. Tambrekar, 7th Semester, Anjuman College of Engineering and technology, Nagpur, India
G.V. Ashwith Kumar and B Venu Madhav, Department of Mechanical Engineering, B V Raju Institute of Technology, India
P Sangamesh, Assistant Professor, Department of Mechanical Engineering, B V Raju Institute of Technology, India
R Naresh, Assistant Professor, Department of Mechanical Engineering, B V Raju Institute of Technology, India
ID 150 Determinants of Financial Technology Adoption for Entrepreneurial Success: PLS-SEM Analysis
Jaya Lakshmi Vakiti, Research Scholar, Department of Management Studies, National Institute of Technology, Warangal, Telangana India
S. L. Tulasi Devi, Associate Professor, Department of Management Studies, National Institute of Technology, Warangal, Telangana India
ID 151 Jigs and Fixtures for Manufacturing
Mr. Waseem Ahamed, Assistant Professor, Production Engineering and System Technology, National Institute of Engineering, Karnataka B V Raju Institute of technology, Narsapur, Vishunupur, Medak, Telangana, 502313, India
B.V. Revanth, Siddarameshwar Cheral, S. Madhu Mohit and D. Tejeshwar, Department of Mechanical Engineering, B V Raju Institute of technology, Narsapur, Vishunupur, Medak, Telangana, India
K Jyothis Prakash, PG Scholar, Industrial Engineering, Department of Mechanical Engineering, College of Engineering Trivandrum, Kerala, India
S A Binoosh, Professor, Department of Mechanical Engineering, College of Engineering Trivandrum, Kerala, India
Md. Khaja Farman, Jarabana Nikhila, K Sahithi, N Aashish, V Shanthan and G. Ramani, U G Student, Department of EEE, B V Raju Institute of Technology, Narsapur, Telangana, India
Devineni Gireesh Kumar, Associate Professor, Department of EEE, B V Raju Institute of Technology, Narsapur, Telangana, India
G. Dhakshayani, P G Student, Department of Mechanical Engineering, B V Raju Institute of Technology, Narsapur, India
ID 157 Design of Real-time Energy monitoring and Slab based Alert system for Domestic applications
Rohan Raj Pasupunoori, Department of Electrical and Electronics Engineering, B V Raju Institute of Technology, Medak, India
Chandra Babu P, Associate Professor,Department of Electrical and Electronics Engineering, B V Raju Institute of Technology, Medak, India
Rayudu Katuri, Professor,Department of Electrical and Electronics Engineering, B V Raju Institute of Technology, Medak, India
D Gireesh Kumar, Associate Professor,Department of Electrical and Electronics Engineering, B V Raju Institute of Technology, Medak, India
Mangli Mahesh, UG Student, Department of Mechanical Engineering, B V Raju Institute of Technology Narsapur, Medak, Telangana, India
ID 159 Musculoskeletal Risk Analysis in A Tyre Manufacturing Industry
P A Adithya Krishna, PG Scholar, Industrial Engineering, Department of Mechanical Engineering, College of Engineering Trivandrum, Kerala, India
S A Binoosh, Professor & PG Coordinator, Department of Mechanical Engineering, College of Engineering Trivandrum, Kerala, India
ID 160 Posture Analysis on Musculoskeletal Disorder-Operators in a Process Industry
M Aswin, PG Scholar, Industrial Engineering, Department of Mechanical Engineering, College of Engineering Trivandrum, Kerala, India
S A Binoosh, Professor, Department of Mechanical Engineering, College of Engineering Trivandrum, Kerala, India
Kafeel Kamran, Student, BIT College of Engineering, Bangalore, India
Umaira Shahneen, Student, P.D.A. College of Engineering, Kalaburagi, India
Fazeel Afwan Ahmed, Student, BIT College of Engineering, Bangalore, India
S.M. Hasanuddin, Student, Methodist College of Engineering and Technology, Hyderabad, India
Ayesha Fatima, Student, Stanley College of Engineering and Technology for Women, Hyderabad, India
ID 162 Design of DAB – IBDC for Extreme Fast Charging of Electric Vehicles
M Siddarth, M Madhu Sudhan, Y Vijay Kumar, M Bhavya, Devunuri Sai Koushik, V. Dhanunjaya, B Ravindhar and K Hareesh Kumar, Electrical and Electronics Engineering, B V Raju Institute of Technology, Narsapur, Medak, Telangana, India
ID 163 Vehicle Automatic Alcohol Monitoring and Ignition Control System
Utharpally Srikanth, V. Dhanunjaya, K. Hareesh kumar, Y Vijay Kumar, B Ravindhar and Mangli Mahesh, Electrical and Electronics Engineering, B V Raju Institute of Technology, Narsapur, Medak, Telangana, India
ID 164 Automatic Battery Thermal Management System by Liquid Control Method
G Ashwik Nayak, B. Ravindhar, Y Vijay Kumar, K. Hareesh Kumar, V. Dhanunjaya, and K. Rakesh, Electrical and Electronics Engineering, B V Raju Institute of Technology, Narsapur, Medak, Telangana, India
ID 178 Assistive and Smart Assessable Helmet
Talha Hussain, Vajrala Lakshman Reddy, Golla Naresh Kumar, Artham Murali and Dhakshayani G, B V Raju Institute of Technology, Vishnupur, Narsapur, Telangana, India
ID 179 The Rudimentary Lessons of GST Implementation in India
A Phani Bhushan, Research Scholar, Department of Management Studies, National Institute of Technology, Warangal (NITW), India
Dr. S. Lakshmi Tulasi Devi, Associate Professor, Department of Management Studies, National Institute of Technology, Warangal (NITW), India
Luigi Renzo Vargas Fiestas, Harry Sebastian Fry Guimet and Alberto Enrique Flores-Perez, Faculty of Industrial Engineering, University of Lima, Lima, Perú
Sathugari Karthik, Patti Sumanth, Alladi Pavan Raj, Katuri Rayudu, Artham Murali, Venu, Madhav Boguda, Electrical and Electronics Engineering, B V Raju Institute of Technology, Narsapur, Medak, Telangana, India
ID 184 Study on Occupational Health Safety and Ergonomics Issues in Small Scale Sweetmeat Industry
Pooja Aloorkar, Department of Industrial & Production Engineering, P.D.A.College of Engineering, Kalaburagi, India
Qutubuddin S.M., Associate Professor, P.D.A. College of Engineering, Kalaburagi, India
Saniya, Gunderaya, Laxmi and S.M. Hasanuddin, Students, Department of Industrial & Production Engineering, P.D.A. College of Engineering, Kalaburagi, India
Sania Thahaseen, MTech Cyber Forensics & Information Security, Department Of Computer Science and Engineering, JNTUH University College of Engineering, Science And Technology, Hyderabad, Telangana, India
Dr. R Sridevi, Professor & Director, Directorate of Entrepreneurship, Innovation and Start-ups, JNTUH University College Of Engineering, Science and Technology, Hyderabad, Telangana, India
ID 186 Drone Forensics: Investigating the Challenges and Solutions in the Age of UAVs
Sarala Gnaneshwari, M. Tech Cyber Forensics & Information Security, Department Of Computer Science And Engineering, JNTUH University College Of Engineering, Science And Technology, Hyderabad, Telangana, India
Dr. R Sridevi, Professor & Director, Directorate of Entrepreneurship, Innovation and Start-ups, JNTUH University College Of Engineering, Science And Technology, Hyderabad, Telangana, India
ID 191 Navigating the Legal Landscape: Compliance and Standards in Digital Forensics
Boda Gowthami, MTech Cyber Forensics & Information Security, Department Of Computer Science and Engineering, JNTUH University College of Engineering, Science and Technology, Hyderabad, Telangana, India
Dr. R Sridevi, Professor & Director, Directorate of Entrepreneurship, Innovation and Start-ups, JNTUH University College Of Engineering, Science and Technology, Hyderabad, Telangana, India
ID 192 Enhancements in Random Forest Algorithms for Improving Healthcare Applications
Shasaif H Mohammed, Process and Quality Improvement Engineer, MBL (USA) Corporation
Shaik Ahamad and Dr. Mohd Abdul Hameed, University College of Engineering, Department of Computer Science Engineering, Osmania University, Telangana, India
Abdul Mateen Mohammed, Department of Mechanical Engineering, CMR University, Bengaluru, Karnataka, India
Shasaif H Mohammed, Process and Quality Improvement Engineer, MBL (USA) Corporation
K. Phani Raja Kumar, Former Sr. Manager, Tech Mahindra Americas, USA
Ravi Shaker DV, Professor of Mechanical Engineering and Principal, TKR Engineering College, Hyderabad Telangana State, India
ID 194 Triboinformatic modelling of Additively Manufactured AlSi10Mg using Machine Learning
Pooja Angolkar, Associate Professor, Department of Robotics and Automation, Angadi Institute of Technology and Management, Karnataka, India,
Manzoor Hussain M, Sr Professor in Mechanical Engineering, JNTU Hyderabad, Telangana, India
M. Arunadevi, Associate Professor, Department of Mechanical Engineering, Dayanand Sagar College of Engineering, Bangalore, India
Anand Deshpande, Professor, Department of Electronics and Communication, Angadi Institute of Technology and Management, Karnataka, India
K. Phani Raja Kumar, Former Sr. Manager, Tech Mahindra Americas, USA
Raheem Alhamdawee, Research Scholar, Mechanical Engineering Department, Jawaharlal Nehru Technological University Hyderabad, India
M. Manzoor Hussain, Sr. Professor in Mechanical Engineering, Jawaharlal Nehru Technological University Hyderabad, Telangana, India
K. Phani Raja Kumar, Former Sr. Manager, Tech Mahindra Americas, USA
ID 201 Speak the Language of AI: Mastering Prompt Engineering for LLMs
Lakshmi Swathi Sreedhar, Chain-Sys, India
Gunderaya, Student, Department of Industrial & Production Engineering, P.D.A. College of Engineering, Kalaburagi, India
Qutubuddin S.M., Associate Professor, P.D.A. College of Engineering, Kalaburagi, India
Saniya, Laxmim and S.M. Hasanuddin, Student, Department of Industrial & Production Engineering, P.D.A. College of Engineering, Kalaburagi, India
ID 208 Artificial Intelligence Electromyography Prosthetic Hand Control Technique
Yeonju Lee and Shin Dong Ho, Graduate and Professor, My Paul School, Goesan-gun, Chungcheongbuk-do, Republic of Korea
Jeongwon Kim, Department of Economics, College of Economics, Nihon University, 3-2 Kanda-Misakicho, 1-chome, Chiyoda-ku, Tokyo, Japan
ID 211 Postural Analysis and Musculoskeletal Disorder Risks among workers in a Commercial Laundry
Gunderaya, Student, Department of Industrial & Production Engineering, P.D.A. College of Engineering, Kalaburagi, India
Qutubuddin S.M., Associate Professor, P.D.A. College of Engineering, Kalaburagi, India
Saniya and Laxmi, Student, Department of Industrial & Production Engineering, P.D.A. College of Engineering, Kalaburagi, India
Manish Kumar Singh, Research Scholar, Department of Management Studies, Indian Institute of Technology Delhi, New Delhi, India
Jitender Madaan, Professor, Department of Management Studies, Indian Institute of Technology Delhi, New Delhi, India
Nuzhath Begum, Ph. D scholar, Department of Psychology, Organizational Psychology, Bhartiya Engineering Science & Technology Innovation University (BESTIU), Gownivaripally, Gorantla, Andhra Pradesh, India-515231