Proceedings – 2nd GCC International Conference on Industrial Engineering and Operations Management
Muscat, Oman, December 01-03, 2024
ISSN: 2169-8767 (U.S. Library of Congress) ISBN: 979-8-3507-4442-2
ID 12 The Impact of 20 Years of Accreditation at Sultan Qaboos University Hospital, Muscat – Oman
Yousuf Al Khamisi and Fatma Al Dhabbari, PhD, MBA, BsN, LSSMBB, and PhD, MSc, BSc, RN, Senior Quality Specialist & Director, Directorate of Development & Quality, Sultan Qaboos University Hospital, University Medical City, Oman
Fatma Al Dhabbari and Yousuf Al Khamisi, PhD, MSc, BSc, RN, and PhD, MA, BA, Director, Directorate of Development & Quality, Senior Quality Specialist, Sultan Qaboos University Hospital, UMC, Oman
Husam Kaid, Hatim Al Sehli, Abdullah Al Qahtani, Khalid Al Johani and Abdulmajeed Dabwan, Industrial Engineering Department, College of Engineering, Taibah University, Medina, Saudi Arabia
Said Al Mufarraji, PHD Student, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Farooq Al Jahwari, Associate Professor, Department of Mechanical and Industrial Engineering, Oil and Gas Research Center, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Mahmoud Al-Kindi, Associate Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Tasneem Pervez, Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Imad Murtadha Ali, Engineer, Department of Mechanical and Industrial Engineering, Petroleum Development of Oman, Muscat, Sultanate of Oman
Lolah S. Kadasah, Haya A. Al-Qahtani, Raghad M. Al-Dosari, Fatima I. Al-Dossary and Lina N. Al-ghamdi, Undergraduate Student in Industrial Engineering, Department, College of Engineering, University of Bisha, Bisha 61922, Saudi Arabia
Khaled Ali Abuhasel, Full Professor in Industrial Engineering, Department, College of Engineering, University of Bisha, Bisha 61922, Saudi Arabia
Yoshan Akira Yseki-Paucar, Bachelors in industrial engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Jorge Mauricio Miller-Espejo, Bachelors in industrial engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Carlo Rivaldo Flores-Cruz, Bachelors in industrial engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Rene Juvenal Yañez-Jurado, Bachelors in industrial engineering, Facultad de Ingeniería, Universidad de Lima, Perú
ID 24 IoT-Integrated Ambulance Allocation-Scheduling for Improved Emergency Response
Reza Kia, Associate Professor, Department of Operations Management and Business Statistics, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Amirhossein Salehi-Amiri, PhD student, Management Science and Marketing (MSM) Division, Alliance Manchester Business School, Manchester, UK
Ali Zahedi, PhD student, Tecnologico de Monterrey, Escuela de Ingeniería y Ciencias, Puebla, Mexico
Navid Akbarpour, Department of Industrial Engineering, University of Science and Technology of Mazandaran, Behshahr, Iran
ID 25 Integrating Sustainability into Engineering Education: Execution and Obstacles
Sayyad Zahid Qamar, Nasra Al Maskari and Tasneem Pervez, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman
Alfonso Franco-Cantuarias, Bachelors in industrial engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Javier Enrique Grimaldo-Quiroz, Bachelors in industrial engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Hamood Al-Jabri, Industrial Engineer, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman Oman
Niyazi Onur Bakır, Associate Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
ID 29 Characteristics of Retracted Publication in Robotics: A Bibliometric Analysis
Solmaz Zardary, Assistant Professor, Department of Knowledge and Information Science, University of Tabriz, Tabriz, Iran
Brayaham Angel Pineda-Pomachagua, Bachelors in industrial engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Renzo Joaquín Núñez-Romero, Bachelors in industrial engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Sergio Esteban Morillas-Coayla, Bachelors in industrial engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Willman Walter Ramirez-Soto, Bachelors in industrial engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Renzo Rodrigo Alexandro Tisza-Vargas, Bachelors in industrial engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Raneem Qwaider, Mariam Almenhali, and Mouza Alkhyeli, Undergraduate Student Department of Statistics and Data Analytics, UAE University, Al Ain, United Arab Emirates
ID 35 UDiNet: A Dilated U-net for Improving OCR Performance
Mahyar Fardinfar, Pouya Rashidikia, Mohammad Reza Rezaie and Mina Zolfy Lighvan, Department of Computer Engineering, Electrical and Computer Engineering Faculty, University of Tabriz, Tabriz, Iran
Mahmood Al Kindi, Associate Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Mohammed Al Rumhi, MSc Engineering Management, Department of Mechanical Engineering, Global College of Engineering and Technology Muscat, Sultanate of Oman, Oman
Dr. Milad Heidari, Associate Professor, Program leader, Quality Assurance Officer, Department of Mechanical Engineering, Global College of Engineering and Technology, Muscat, Sultanate of Oman, Oman
Dr. Eman Al Namaani, Associate Professor, Deputy Dean (Quality Assurance), Global College of Engineering and Technology, Muscat, Sultanate of Oman, Oman
Mmachuene Britney Mojapelo, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa
Pallab Sarmah, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa
ID 41 A Stewardship Approach to Manage Safety and Quality Systems: A Case Study
Mampsane Dolly Phalane, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa
ID 44 Design and Optimization of Hydrogen Supply Chain Network: A Case Study
Hawraa Al Balushi, Abdulrahman Al Mansoori, Ali Al Rawahi and Dr. Hakan Gultekin, Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, Oman
ID 45 Insight into Future Directions for the Utilization of Green Hydrogen in Oman
Ibrahim Al-Mamari, Saif Al Ruhaili, Eman Al Naamani and Milad Heidari, Mechanical Engineering Department, Global College of Engineering and Technology, Muscat, Sultanate of Oman
ID 46 Supply Chian Strategies as Performance Drivers in Food Networks
Bayan Al Busaidi and Nasiru Zubairu, Logistics with supply chain management researcher and Director (acting), Faculty of Transport and Logistics Muscat University, Muscat, Sultanate of Oman, Oman
ID 47 India’s Gold Price Premium Discount and Seasonality
Imlak Shaikha, Priyanka Vallabhb and Leena A. Kaushalc, Management Development Institute Gurgaon, Haryana, India
ID 49 Design and Fabrication of an Autonomous Beverage-Serving Robot
Anas Fathy Ahmed, Department of Mechanical Engineering, Global College of Engineering and Technology, Muscat, Sultanate of Oman, Oman
Milad Heidari, Associate Professor, Department of Mechanical Engineering, Global College of Engineering and Technology, Muscat, Sultanate of Oman, Oman
Sivasakthivel Thangavel, Associate Professor, Department of Mechanical Engineering, Global College of Engineering and Technology, Muscat, Sultanate of Oman, Oman
ID 50 Financing Hydrogen Supply Chains: A Systematic Review and Conceptual Framework
Lubna Al Jabri and Nasiru Zubairu, Teaching Assistant and Director (acting), Researcher, Faculty of Transport and Logistics, Muscat University Muscat, Sultanate of Oman, Oman
Khalifa Al Shukaili, Lecturer, Department of Mechanical Engineering, University of Technology and Applied Science, Nizwa, Sultanate of Oman, Oman
Said Al Mufarraji, PHD Student, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
Hamza Al kindi, Assistant trainer, Department of Mechanical Engineering, University of Technology and Applied Science, Nizwa, Sultanate of Oman
ID 53 Dynamic Delivery Scheduling Model Using Historical Data Analysis for Optimal Truck Selection
Wejdan Mohammed Alamri, Senior Industrial Engineering Student at King Khalid University Hajar Daghash Alharthi, Senior Industrial Engineering Student at King Khalid University Rahaf Khaled alhies, Junior Artificial Intelligence Student at University of Hail
Dr. Abdulsalam Ahmed Alqarn, Assistant Professor at King Khalid University in the Industrial Engineering Department
Dr. Mohammed Alqahtani, Professor of Industrial Engineering, College of Industrial Engineering, King Khalid University, Abha, Kingdom of Saudi Arabia
Raneem Bayram AlQahtani, Ghala Saeed AlShehri, Amal Ali Albshabshe, Maram Mohammed Khardali and Reham Saeed Alshahrani, Senior industrial engineering students, College of Industrial Engineering, King Khalid University, Abha, Kingdom of Saudi Arabia
ID 56 The Urban Dilemma: How Car-Centric Design Perpetuates Traffic and Costs”
Abdullah Mahmood Al Kindi, Undergraduate Student, College of Economics and Political Since, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
ID 58 Statistical Analysis for Weaving Quality using ANOVA: a Case Study
Yuana Delvika, Mechanical and Industrial Engineering Department, Indian Institute of Technology Roorkee, Uttarakhand, India Industrial Engineering Department, Universitas Medan Area, Indonesia
Akshay Dvivedi, Professor, Mechanical and Industrial Engineering Department, Indian Institute of Technology Roorkee, Uttarakhand, India
Veena Tewari and Sk. Mastanvali, Asst. Professors, College of Economics and Business Administration, University of Technology and Applied Sciences (Ibri)
Swapnil Morande, University of Naples, Italy
Asma Alsaad, MEM Student, Department of Engineering Management, Prince Sultan University, Riyadh, Saudi Arabia
Ahmad Alkhaleefah, Assistant Professor, Department of Engineering Management, Prince Sultan University, Riyadh, Saudi Arabia
ID 62 Modal Analysis of Horizontal Axis Wind Turbine
Mohammed Said Salim Alhajri, Department of Mechanical Engineering, Global College of Engineering and Technology, Muscat, Sultanate of Oman
Milad Heidari, Mechanical Engineering Department, Global College of Engineering and Technology, Muscat, Sultanate of Oman
Abrar Al Abri, Mechanical Engineering Department, Global College of Engineering and Technology, Muscat, Sultanate of Oman
ID 63 Hydrogen Energy Potential in Oman: A Pathway to Decarbonization
Nawaz Ahmed a, Afzal Husain a, Tasneem Perveza and Sulaiman al Obaidania, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
Imran Khan, Department of Chemistry, Sultan Qaboos University, Muscat, Sultanate of Oman
Arash Mehdizadeh, Assistant Professor, Department of Electrical and Electronics Engineering, College of Engineering, Australian University, West Mishref, Safat 13015, Kuwait
Ahmad Sedaghat, Professor, Department of Mechanical Engineering, College of Engineering, Australian University, West Mishref, Safat 13015, Kuwait
Sayed Mohamad Soleimani, Professor, Lyles School of Civil and Construction Engineering, Purdue University, West Lafayette, IN 47904 USA,sms110@purdue.edu, Scientific Research Centre, Australian University, West Mishref, Safat 13015, Kuwait
Reem Younis Ali Al Balushi, Mechanical and Industrial Engineering, National University of Science and Technologyl, Muscat, Sultanate of Oman
Zainab Mahfoodh Dhiyab Al Saadi, Mechanical and Industrial Engineering, National University of Science and Technology, Muscat, Sultanate of Oman
B.M. Sangeetha, Senior Lecturer, Mechanical and Industrial Engineering, National University of Science and Technology Muscat, Sultanate of Oman
Shahjahan, Assistant Professor, Mechanical and Industrial Engineering, National University of Science and Technology, Muscat, Sultanate of Oman
Pradeep Kumar Krishnan , Assistant Professor, Mechanical and Industrial Engineering, National University of Science and Technology, Muscat, Sultanate of Oman
Pradeep Kumar Krishnan, Assistant Professor, Mechanical and Industrial Engineering, National University of Science and Technology, Muscat, Sultanate of Oman, Oman
Hussein Antar Hussain Murad Bakhsh Al Balushi, Mechanical and Industrial Engineering, National University of Science and Technology, Muscat, Sultanate of Oman
Mohamed Siddiq Mohamed Al-Balushi, Mechanical and Industrial Engineering, National University of Science and Technology, Muscat, Sultanate of Oman, Oman
Thiyagu M, Saveetha School of Engineering Engineering, Saveetha Institute of Medical and Technical Sciences, India
Megavannan Murugaiyan Mani, Saveetha School of Engineering Engineering, Saveetha Institute of Medical and Technical Sciences,India
B.M. Sangeetha, Senior Lecturer, Mechanical and Industrial Engineering, National University of Science and Technology Muscat, Sultanate of Oman
ID 67 Analysis of Frequent Car Accidents in the City of Tabuk, Saudi Arabia: A Survey-Based Study
Moahd Khaled Alghuson, Assistant Professor, Department of Industrial Engineering, Faculty of Engineering, University of Tabuk, Tabuk 47512, Saudi Arabia
ID 68 Optimization of Energy Consumption in a Maritime Transit Network
Mubarak Abdullah Bahaithm and Abdul Zubar Hameed, Department of Industrial Engineering, Faculty of Engineering, King Abdulaziz University, Jeddah, Saudi Arabia
ID 69 Factors Influencing Student’s Decision to Enroll in Private Universities in Saudi Arabia
Huda Abdulraquib, Iman Musawa, Mashael Alqurashi, Monira Albogami, Ola Sharawi, Rasha Almalik and Salwa Abdulraquib, PhD Student, Effat College of Business, Effat University, Saudi Arabia
Lindos Daou, Assistant Professor, Business School, Effat University, Saudi Arabia
Bandar S. Aljabri, Department of Industrial Engineering, College of Engineering, P.O. Box-800, King Saud University, Riyadh-11421, Saudi Arabia
Abdullah H. Alharthy, Saudi Ministry of Human Resources and Social Development, Saudi Arabia
ID 71 End to End Corrosion Management Digitalization
Eithar Al-Ghazali, Static Integrity Engineer, Asset Integrity Department, OQEP, Muscat, Sultanate of Oman, Oman
Nawras Al Jabri, Materials and Corrosion Engineer, Asset Integrity Department, OQEP, Muscat, Sultanate of Oman, Oman
Yahya Al Bulushi, Asset Integrity Manager, Asset Integrity Department, OQEP, Muscat, Sultanate of Oman
Ali Arishi, Assistant Professor, Department of Industrial Engineering, King Khalid University, Saudi Arabia
ID 73 Performance Assessment of Date Palm Fibers: Effects of Treatments and Geographic Variability
Sulaiman AL-Siyabi, Khalid Alzebdeh, Nasr Al Hinai and Mahmoud Alsafy, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
Maram Mohammed Khardali, Senior Industrial Engineering Student, College of Engineering, King Khalid University, Abha, Kingdom of Saudi Arabia
Airthon Jhair Julcarima-Perez, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
Alvaro Miguel Portal-Huayanca, Bachelors in Industrial Engineering, Facultad de Ingeniería, Universidad de Lima, Perú
ID 78 Exploration of Multi-Material 3D Printing Techniques For Complex Mechanical Components
Suhail Al Hikmani, Pooyan Rahmanivahid and Moustafa Sheikh Salim, Department of Mechanical Engineering, Global College of Engineering and Technology, Muscat, Sultanate of Oman
ID 79 Designing a Smart System for Helping Blind and Visually Impaired People
Mohammed H. Alhaag, Assistant Professor, Department of Industrial Engineering, Mustaqbal University, Buraidah, Al-Qassim, Saudi Arabia
Nacer Eddine Hammami, Assistant Professor, Department of Computer Engineering, Mustaqbal University, Buraidah, Al-Qassim, Saudi Arabia
Anas Alenazi, Omar AL-Akkad, Asim Altirbaq and Faisal S. Alharbi, Department of Industrial Engineering, Mustaqbal University, Buraidah, Al-Qassim, Saudi Arabia
Ruba Abdulrahman Alkhuzayim, Student, Department of Computer Engineering, Al- Mustaqbal University, Buraidah, Al-Qassim, Saudi Arabia
ID 80 Proposed Design for Adjustability: Body Powered Prosthetic Hand
Tamer M. Khalaf, Department of Industrial Engineering, College of Engineering, King Saud University. P.O. Box 800, Riyadh 11421, KSA
ID 81 Challenges and Opportunities in Implementing a National Hazmat Management Framework in Oman
Ali al Kalbani, Ph. D Candidate, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Hakan Gultekin, Associate Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
Nasr Al Hinai, Associate Professor and Head, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
Montaha Saud Al Habsi, Logistics, Tourism, and Service Management Department, German University of Technology in Oman, Muscat, Sultanate of Oman, Oman
ID 83 Evaluation of Indoor Environmental Quality and Energy Consumption for an Industrial Workspace
Saleh Al-Saadi, Associate Professor, Department of Civil and Architectural Engineering, Director of Sustainable Energy Research Center (SERC) Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Hanan Al-Khatri, Assistant Professor, Department of Civil and Architectural Engineering, Head of Quality Assurance and Academic, Accreditation, Unit (QAAAU), Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
ID 84 Improvement of the Preventive Maintenance Performance,
Relief Valves as a Case Study, Naser Elwerfalli, College of Mechanical Engineering Technology, Benghazi – Libya
Yousuf Al Khamisi, Operations Management, Sultan Qaboos University, Muscat – Oman
Ashraf Wanis, College of Mechanical Engineering Technology, Benghazi / Libya
Khalid Al Hashli, Department of Mechanical Engineering, Global College of Engineering and Technology, Muscat, Sultanate of Oman, Oman
Sivasakthivel Thangavel, Associate Professor, Department of Mechanical Engineering, Global College of Engineering and Technology, Muscat, Sultanate of Oman, Oman
Pooyan Rahmanivahid, Associate Professor, Department of Mechanical Engineering, Global College of Engineering and Technology, Muscat, Sultanate of Oman, Oman
Milad Heidari, Associate Professor, Department of Mechanical Engineering, Global College of Engineering and Technology, Muscat, Sultanate of Oman, Oman
Fakhra Al Shamsi, Department of Civil Engineering, Buraimi University, Buraimi, Sultanate of Oman, Oman
Sivasakthivel Thangavel, Associate Professor, Department of Mechanical Engineering, Global College of Engineering and Technology, Muscat, Sultanate of Oman, Oman
Mira Chitt, Associate Professor, Department of Mechanical Engineering, Global College of Engineering and Technology, Muscat, Sultanate of Oman
ID 93 Uncovering optimal gains in hotel mergers: An inverse DEA-based framework
Amar Oukil, Associate Professor, Department of Operations Management & Business Statistics, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Ahmed-Amin Soltani, Assistant Professor, VEHDD laboratory, Department of Hydraulics, University of M’sila, University Pole, Road Bordj Bou Arreridj, M’sila 28000, Algeria
ID 94 Advanced Machine Learning Techniques for Concrete Properties Prediction
Yahya Al-Kaabi, Lecturer, College of Engineering, University of Buraimi, Al-Buraimi, Sultanate of Oman, Oman
Janaki Sivakumar, Associate Professor, Department of Computer Science and Creative Technologies, Global College of Engineering and Technology, Muscat, Sultanate of Oman, Oman
Aisha Al-Farsi, Lecturer, Computing Department, Muscat College, Muscat, Sultanate of Oman, Oman
Mustafa Al Ajmi, Renewable Energy Engineer, Power Systems Department, Petroleum Development Oman, Muscat, Sultanate of Oman, Oman
Khalid Anwar, Associate Professor, Mechanical Engineering Department, Global College of Engineering and Technology, Muscat, Sultanate of Oman, Oman
Muhad Azimin, Senior Lecturer, Muscat University, Mechanical Engineering Department, Oman
Muhammad Osama, Department of Computer Science, National University of Computer & Emerging Sciences, Karachi, Pakistan
Syed Shah Sultan Mohiuddin Qadri and Ahmet Kabarcık, Department of Industrial Engineering, Çankaya University, Ankara, Türkiye
Muhammad Farrukh Shahid, Department of Artificial Intelligence, National University of Computer & Emerging Sciences, Karachi, Pakistan
Maryam Rahman, Mahmood Al-Kindi, Ahmed Shaban and Nasr Al Hinai, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
ID 99 Routing of Unmanned Aerial Vehicles for Search and Rescue Operations: A Case Study in Oman
Hakan Gultekin, Associate Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
Abdulkadir Gultekin, Department of Industrial Engineering, Middle East Technical University, Ankara, Türkiye
Amir Barakati, Associate Professor, Department of Mechanical and Aerospace Engineering, George Washington University, Washington DC, USA
Arash Mehdizadeh, Assistant Professor, Department of Electrical and Electronics Engineering, College of Engineering, Australian University, West Mishref, Safat 13015, Kuwait
Baktanoosh K. Nakhjavani, Lead Engineer, FATA Automation, Department of Engineering, Auburn Hills MI 48326, USA
Ludina Juma Al Bulushi, MSc Engineering Management Department of Mechanical Engineering, Global College of Engineering and Technology (GCET), Muscat, Sultanate of Oman, Oman
Sivasakthivel Thangavel, Associate Professor, Department of Mechanical Engineering, Global College of Engineering and Technology (GCET), Muscat, Sultanate of Oman, Oman
Mira Chitt, Associate Professor, Department of Mechanical Engineering, Global College of Engineering and Technology, Muscat, Sultanate of Oman
Tauseef Ahmad Ansari, Assistant Professor and Head, Department of Civil Engineering, University of Buraimi, Sultanate of Oman.
Yahya Said Al-Kaabi, Teaching Assistant, Department of Civil Engineering, University of Buraimi, Sultanate of Oman.
Bashar Mohammed Alhumaidi, Student, Department of Civil Engineering, University of Buraimi, Sultanate of Oman.
Hind M Al-Maawi, Nouf M Al-Soairy, Alhanouf S Al-Shahrani and Majd N AL-Shahrani, Undergraduate Student in Industrial Engineering Department, College of Engineering, University of Bisha, Bisha 61922, Saudi Arabia
Khaled Ali Abuhasel, Full Professor in Industrial Engineering, Department, College of Engineering, University of Bisha, Bisha 61922, Saudi Arabia
Waleed Ahmed, Associate Professor, Department of Mechanical and Industrial Engineering, UAE University, Al Ain, UAE
Rihab Hamza, Instructor, Mechanical and Aerospace Engineering Department, UAE University, Al Ain, UAE
Omar Alkhatib, Associate Professor, Architectural Engineering Department, UAE University,
Essam Zaneldin, Associate Professor, Civil and Environmental Engineering Department, UAE University, Al Ain, UAE
Khalid Al Fahdi, Ph.D. Candidate, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
Hakan Gultekin, Associate Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
Emad Summad, Assistant Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
ID 108 Multi agent for QoS-Aware Flying-IRS Deployment in 6G THz Networks
Nahla Nur Elmadina, Department of Electrical Engineering, Alzaiem Alazhari University, Khartoum, Sudan
Nour Eldin Osman, Department of Information Studies, Sultan Qaboos University, Oman
Rashid A. Saeed, Electronics Department, Sudan University of Science and Technology, Khartoum, Sudan
Elsadig Saeid, Department of Electrical Engineering, Alzaiem Alazhari University, Khartoum, Sudan
ID 109 An Exploratory Study on Material Handling Systems Design and Analysis
Ahmed Gabr, Teaching and Research Assistant, Faculty of Engineering, German International University, Cairo, Egypt
Amr Nounou, Associate Professor, Faculty of Engineering, German International University, Cairo, Egypt
Hamed Al-Yaqoubi, Reservoir Engineer, Petroleum Development Oman, Muscat, Sultanate of Oman, Oman
Sultan Al-Mamari, Petrophysicist, Petroleum Development Oman, Muscat, Sultanate of Oman, Oman
Beyza Lobut, Research Assistant, Department of Petroleum and Chemical Engineering, Istanbul Technical University, Istanbul, Türkiye
Emre Artun, Associate Professor, Department of Petroleum and Chemical Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
ID 111 Modeling on Laser Welded Similar Joints Using Nickel-Based Incoloy800
Seenivasan. Sankarasubramanian, Research scholar, Department of Manufacturing Engineering, Annamalai University, Annamalai Nagar, Chidambaram
Varahamoorthi.R, Professor, Department of Manufacturing Engineering, Annamalai University, Annamalai Nagar, Chidambaram
ID 113 The Impact of Logistics Digitalization on the Performance of the Companies
Rim Sghiouri, Laboratory of Engineering Sciences, National School of Applied Sciences, Ibn Tofail University, Kenitra, Morocco
Chouaib Elhammouchi, Laboratory of Engineering Sciences, National School of Applied Sciences, Ibn Tofail University, Kenitra, Morocco
ID 114 Viability Assessment of Large-Scale Solar Farms in Rustaq-Juma: A Life Cycle Analysis
Navid Nasiri, Electrical and Computer Engineering Department, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Sulaiman Al-Hashmi, Center for Environmental Studies and Research, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Rayyan Muhammad Rafikh, Electrical and Computer Engineering Department, College of Engineering, Northeastern University Boston, Massachusetts 02115, USA
Hooman Nasiri, Head of the Department of Economics and Customs, Islamic Azad University, Bushehr, Bushehr, Iran
Maryam Farrizi, Electrical and Computer Engineering Department, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Navid Nasiri, Electrical and Computer Engineering Department, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Morteza Mohammadzaheri, Engineering Department, German University of Technology in Oman, Muscat, Sultanate of Oman, Oman
Intisar Al-Buasaidi, College of Engineering and Technology, University of Technology and Applied Sciences, Muscat, Oman
Hooman Nasiri, Head of the Department of Economics and Customs, Islamic Azad University, Bushehr, Bushehr, Iran
Maryam Farrizi, Electrical and Computer Engineering Department, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Akbar Karimi, Assistant Prof., Civil & Environmental Engineering Department, College of Engineering, National University of Science and Technology, Muscat, Oman
ID 116 Potential and Economic Analysis of Wind-to-Hydrogen Production in the Sultanate of Oman
Navid Nasiri, Electrical and Computer Engineering Department, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Rayyan Muhammad Rafikh, Electrical and Computer Engineering Department, College of Engineering, Northeastern University Boston, Massachusetts 02115, USA
Maryam Farrizi, Electrical and Computer Engineering Department, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Hooman Nasiri, Head of the Department of Economics and Customs, Islamic Azad University, Bushehr, Iran
ID 117 Investigation of Clad Failures in Aluminum Smelters
Aadel Al Niyadi, Sayyad Zahid Qamar, Majid Al Maharbi and Faroq Al Jahwari, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman
ID 120 Redesigning the Material Handling System for a Medical Warehouse
Wafa Al Bulushi, Department of Operations Management and Business Statistics, College of Economics and Political Science, Sultan Qaboos University, Sultanate of Oman, Oman
ID 121 Design of Solid Oxide Fuel Cell (SOFC) Model for Flare to Power Conversion
Hebatallah Al Jabri, Nawaz Ahmed, Afzal Husain, and Abdullah Al-Janabi, Mechanical and Industrial Engineering Department, Sultan Qaboos University, Muscat, Oman
Abdulrahman Al-Nassar, Saleh Al-Gobaisi and Mohammed S. Al-Kahtani, Department of Industrial Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia
Mariam Ait AL and Said Achchab, ENSIAS, Mohammed V University, Rabat, Morocco
Younes Lahrichi, ISCAE, Casablanca, Morocco
ID 127 Agent-Based Modeling for Effective Innovation Ecosystem Management
Emad Summad, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Mahmood Al Kindi, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Ichraq Ouhmidou, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Alzahra Al Kindi, Gate10, Amlak Tower, Floor P, 23rd July St., Muscat, Sultanate of Oman, Oman
Nacer Eddine Hammami, Assistant Professor and Head, Department of Computer Engineering, Al- Mustaqbal University, Buraidah, Al-Qassim, Saudi Arabia
Abdelhameed Fawzy, Assistant Professor, Department of Computer Engineering, Al-Mustaqbal University, Buraidah, Al-Qassim, Saudi Arabia
Mohammed H. Alhaag, Assistant Professor, Department of Industrial Engineering, Mustaqbal University, Buraidah, Al-Qassim, Saudi Arabia
Ruba Abdulrahman Alkhuzayim and Ruba Khaled Al-sedrani, Student, Department of Computer Engineering, Al- Mustaqbal University, Buraidah, Al-Qassim, Saudi Arabia
Anas Alenazi, Student, Department of Industrial Engineering, Mustaqbal University, Buraidah, Al-Qassim, Saudi Arabia
Mohammed AL. Owiemri, PHD Student, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Moosa S.M. Al Kharusi, Assistant Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Farooq Al Jahwari, Associate Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Saad Abdulah, Department of Industrial Engineering, University of Engineering and Technology, Peshawar, Peshawar, Pakistan
Shahid Maqsood, Professor, American University of Bahrain, Bahrain
Imran Ahmad, Associate Professor, Department of Industrial Engineering, University of Engineering and Technology, Peshawar, Pakistan
Suhaib, Assistant Professor, School of Management Sciences, Ghulam Ishaq Khan Institute of Engineering Sciences and Technology
Mohammad D. AL-Tahat, The University of Jordan, School of Engineering, Industrial Engineering Department, Amman 11942, Jordan
Maisa A. Nsour, Luminus Technical University College (LTUC), Engineering Department, Amman 11118, Jordan
ID 133 Designing and Prototyping a Filament Extruder
Nour Ibrahim, Faculty of Engineering, German International University, Cairo, Egypt
Hana Gohar, Faculty of Engineering, German International University, Cairo, Egypt
Rahaf Borham, Faculty of Engineering, German International University, Cairo, Egypt
Habiba ElSayed, Faculty of Engineering, German International University, Cairo, Egypt
Seif Salah, Teaching and Research assistant, Faculty of Engineering, German International University, Cairo, Egypt
Amr Nounou, Associate Professor, Faculty of Engineering, German International University, Cairo, Egypt
Eng. Omar Alsiyabi and Dr. Mahmood Al-kindi, Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, Al-Khoud, Muscat 123, Oman
Dr. Ahmed Shaban, Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, Al-Khoud, Muscat, Oman, Mechanical Engineering Department, Faculty of Engineering, Fayoum University, Fayoum 63514, Egypt
Eng. Thamir Alkathiri, An Expert in Procurement Field, with 27 years of experience, Muscat, Oman
Shadhan Salim Al-Harmi, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Mohamed Abdullah Al-Moqbali and Faisal Khalid Al-Yafaey, Department of Mechanical and Industrial Engineering, Sultan Qaboos University Muscat, Sultanate of Oman, Oman
Mohammed Othman, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat 123, Sultanate of Oman, Oman Department of Industrial and Mechanical Engineering, An-Najah National University, Nablus, West Bank, Plaestine
Sara Amani, PhD Candidate, Department of Multidisciplinary Engineering, Texas A&M University, College Station, Texas, USA
Kristi J. Shryock, Associate Professor, Department of Multidisciplinary Engineering, Texas A&M University, College Station, Texas, USA
Mahmood Amani, Professor, Department of Petroleum Engineering, Texas A&M University at Qatar, Doha, Qatar
Pranita Banerjee, PhD student, Department of Civil and Environmental Engineering, United Arab Emirates University, Al Ain, United Arab Emirates
Essam Zaneldin, Associate Professor and Coordinator of the Master of Engineering Management Program, Department of Civil and Environmental Engineering, United Arab Emirates University, Al Ain, United Arab Emirates
Waleed Ahmed, Associate Professor, Engineering Requirements Unit, United Arab Emirates University, Al Ain, United Arab Emirates
Ichraq Ouhmidou, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman
Khalid AL Zebdeh, Associate Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Emad Summad, Associate Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
Shaima Alhammadi, Mariam Abusaima and Akio Alnajjar, Student, Mechanical and Aerospace Engineering Department, UAE University, Al Ain, UAE
Rihab Hamza, Instructor, Mechanical and Aerospace Engineering Department, UAE University, Al Ain, UAE
Waleed Ahmed, Associate Professor, Engineering Requirements Unit, UAE University, Al Ain, UAE
Essam Zaneldin, Associate Professor, Civil and Environmental Engineering Department, UAE University, Al Ain, UAE
Abdelkhaleq El Haddad and Said Achchab, ENSIAS, Mohammed V University, Rabat, Morocco Younès Lahrichi, ISCAE Group, Casablanca, Morocco
Ahmed Shaban, Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, Al-Khoud, Muscat, Oman Mechanical Engineering Department, Faculty of Engineering, Fayoum University, Fayoum 63514, Egypt
Nasr Al-Hinai, Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, Al-Khoud, Muscat, Oman
Dr. Deena R, Assistant Professor, Department of Management Studies, Middle East College, Oman
ID 144 Quantitative Analysis of Nostalgic Feeling in the Menu Selection Behavior of Consumers
Sunhee Kwon, Assistant Professor, Department of Industrial Engineering and Management, College of Industrial Technology, Nihon University Chiba, Japan
Juan Carlos Rodriguez Briones, Coordinator and Professor of The Executive and Top Management Master’s Program, Universidad Iberoamericana Monterrey, Monterrey, Nuevo Leon, Mexico
María Guadalupe López Molina, Full-time professor in the science and engineering department, Universidad Iberoamericana Puebla, Puebla, Mexico
Benhür Satir, Executive Consultant and Associate Professor of Industrial Engineering, MRC Türkiye R&D Center, Ankara, Türkiye
Arda Sari, Consultant, MRC Türkiye R&D Center, Ankara, Türkiye
Burak Özsoy, Executive Power System Expert, MRC Türkiye R&D Center, Ankara, Türkiye
ID 147 Improving Obsolescence Management by Enhancing Supplier-Customer Collaboration
Mora Issa and Muhammad Imran, Department of Mechanical and Industrial Engineering, Rochester Institute of Technology, Dubai, United Arab Emirates
Majid Al Jahdhami, Salah Al Balushi, Abdullah Al Kindi, Abdallah Al Madhani and Dr. Hakan Gultekin, Department of Mechanical and Industrial Engineering College of Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
ID 150 Innovation and Entrepreneurship: Driving Change and Growth
Abdullah Hamed and Al-Ruheili, Sultan Qaboos University, Oman
ID 152 A Study on Different Friction-Stir Processing Parameters effect on LM-25 Aluminum Alloy
Imad Amine, Department of Engineering and Technology, American College of the Middle East, Kuwait, College of Engineering and Technology, American University of Middle East, Kuwait
Swarup Patil, Manufacturing Engineer, Master’s in Engineering Management, University of Michigan, Dearborn, United States
Ahmed Al Qassabi, MSc, Industrial Engineering, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Nasr Al Hinai, Associate Professor and Head Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Sujan Piya, Associate Professor, Department of Industrial E ngineering and Engineering Management, University of Sharjah, Sharjah, United Arab Emirates
Coskun Joe Dizmen, Assistant Professor, College of Engineering and Technology, American University of the Middle East, Kuwait
Sara Alhajri, Retaj Alshatti, Raghad Alsaeed, Arwa Alazmi and Nour Altulaihi, Graduates of the Bachelor of Science in Industrial Engineering American University of the Middle East, Kuwait
Lena Alzhrani, Sarah Osailan and Hasan Balfaqih, Operations and Supply Chain Management Department, Effat University, Jeddah 21478, Saudi Arabia
Raneem Saleh, Hasan Balfaqih and Sarah Osailan, Operations and Supply Chain Management Department, Effat University, Jeddah, Saudi Arabia
ID 169 Designing the Layout and Operations of Medical Supplies Warehouse
Zamzam Al Aamri, Student in Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Dunya Al Bahri, Student in Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Roa’a Al Nou’mani, Student in Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman, Oman
Hakan Gultekin, Associate Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman
Saif Al-Rawahi, Abdalla Al-Shaaili, Omer Al-Kharusi and Nasr Al-Hinai, Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, Al-Khoud, Muscat 123, Oman
Ahmed Shaban, Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, Al-Khoud, Muscat 123, Oman, Mechanical Engineering Department, Faculty of Engineering, Fayoum University, Fayoum 63514, Egypt
Nabeel Alanbar, Chairil Akbar, Omar Alsawafy and Ahmed Attia, Department of Industrial and Systems Engineering, College of Computing and Mathematics, King Fahd University of Petroleum and Minerals, Dhahran 31261, Kingdom of Saudi Arabia
Khulood Al Maawali, Reliability Engineer, Technical Services Department, OQEP, Muscat, Sultanate of Oman
Rakan Khalid Alkahlani, Khalid Hassan Almaliki, Ahmed Namr Abuduhair and Hassan Hijry, Department of Industrial Engineering, University of Tabuk, Tabuk, 47315, Saudi Arabia
Mohammed Omar Aljohani, HSE Supervisor Engineer, El Seif Engineering Contracting Company, Tabuk, NEOM, Saudi Arabia
ID 176 Optimization of Additive Manufacturing (3D Printing) Process for Bio-based nanocomposites
Khalid Khalfan Al Kindi, Industrial Engineering Graduates, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
Al Baraa Zahran Al Anqoodi and As’Ad Salim Al Alawi, Bachelor’s Degree Students, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
Mahmoud Alsafy, PhD Degree Students, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
Khalid Al-Zebdeh, Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
Nasr Al Hinai, Associate Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
Tahra Hamed Azzan Al Rawahi, Sultan Qaboos University, Al-Khoud, Muscat, Oman
ID 179 Using Phase Change Materials for Better Thermal Performance of Electric Vehicle Batteries
Hamdan Al-Maqbali1, Ali Al-Barakhati, Abdulrahman Al-Balushi, Alhassan Al-Balushi, Abdullah Al-Janabi, Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University Muscat, Oman
Osman Gulseven, Associate Professor and WTO Chair, Department of Natural Resource Economics, College of Agricultural and Marina Sciences Sultan Qaboos University, Muscat, Sultanate of Oman
Fahad Alasim, Assistant Professor, Industrial Engineering Department, College of Engineering, King Saud University, Riyadh-11421, Saudi Arabia, Vice-Dean, Advanced Manufacturing Institute, King Saud University, Riyadh-11421, Saudi Arabia
ID 183 Green Hydrogen Supply Chain Sustainability Enablers – A Review
Layan Al-Bawab, Faculty of Transport & Logistics, Muscat University, Saltanat of Oman
Dr. Ahmed Zainul Abideen, Faculty of Transport & Logistics, Muscat University, Saltanat of Oman
Anwaar Al Amairi, Muscat University Student, Logistics and Supply Chain Management UG Student, Muscat University, Saltanat of Oman
Dr. Ahmed Zainul Abideen, Faculty of Transport & Logistics, Muscat University, Saltanat of Oman
ID 185 Implementation of Lean Manufacturing to Increase the Productivity of a Peruvian Textile SME
Santiago Andrés Zegarra Rosell, Career of Industrial Engineering, Faculty of Engineering and Architecture, University of Lima, Lima-Perú
Sebastian Dario Ramos Tenorio, Student, Career of Industrial Engineering, University of Lima, Lima, Perú