Chanchal Saha, Systems Science and Industrial Engineering, State University of New York at Binghamton, Binghamton, New York 13902, USA
Md. Shafayet Hossain Bhuiya, Mechanical and Materials Engineering University of Western Ontario London, Ontario, Canada N6A 5B9
Mohsen Dastpak, Department of Financial Engineering, University of Economic Sciences, Tehran, Iran
Saeed Poormoaied, Department of Industrial Engineering Ferdowsi University of Mashhad, Iran
Masoud Naderpoor, Department of Computer Engineering, Ferdowsi University of Mashhad, Iran
ID 8 Assembly Line: New Modelling and Simulation
Abdul Talib Bon, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Malaysia
Umol Syamsyul Rakiman, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Malaysia
ID 9 Multi-disciplinary Approach to Evaluate Companies’ Performances
Kevin Tran, Department of Industrial and Systems Engineering, University of Southern California, 3715 McClintock Avenue, GER 240, Los Angeles, CA 90089-0193, USA
ID 11 Strategy Management and Business Success
Damiebi Denni Fiberesima, Central Engineering, Shell Petroleum Development Company, Nigeria
Nazatul Shima Abdul Rani, School of Management, Asiae University, Kuala Lumpur, Malaysia
ID 12 Gauge Imprecision and Process Capability Analysis
Ali Zeinal Hamadani, Department of Industrial and Systems Engineering, Isfahan University of Technology, Isfahan 84156, Iran
Ali Massaeli, Research and Technology Directorate, National Iranian Gas Company, I.R. of Iran
Ali Massaeli, National Iranian Gas Company, Iran
- Sharif, Indian Institute of Technology, Kanpur-208016, India
Mohammad Ali Shafia, Ragheb Rahmaniani and Ansar Rezai, Department of Industrial Engineering and Management, Iran University of Science and Technology, Tehran, Iran
Moloud Rahmaniani, Economic Department, Allameh Tabataba’i University, Tehran, Iran
ID 21 Investigation of Total Quality Management in Libya: A Proposed Guideline of Implementation
Abdussalam Shibani, Messaoud Saidani and Amrit Sagoo, Department of Built Environment, Coventry University, West Midlands CV1 5FB, United Kingdom
Nawal Gherbal, Knowledge Management, Coventry University, West Midlands CV1 5FB, United Kingdom
ID 23 Critical Success Factors of Implementing Total Quality Management in Libyan Organisations
Nawal Gherbal, Department of Engineering and Knowledge Management, Coventry University, UK
Abdussalam Shibani, Messaoud Saidani and Amrit Sagoo, Department of Built and Environment, Coventry University, UK
Zahra Ansari, Alijani Aley, Sharif Sharghi St., Emam Khomeini St., Esfahan, Iran
ID 30 A Mathematical Model for Train Routing and Scheduling Problem with Fuzzy Approach
Amin Jamili, Department of Railway Transportation, MAPNA Group, Tehran 19395-6448, Iran
Javier Cruz-Salgado, Graduate School of Industrial Engineering and Manufacturing, CIATEC, León, Guanajuato 37545, México
Sergio Alonso-Romero and Victor Morales-Torres, Materials Research, CIATEC, León, Guanajuato 37545, México
Ali Kimiyaghalam, Zanjan Energy Distribution Company, Iran
Ahmad Ashouri, Electrical Department Engineering, University Of Zanjan, Zanjan, Iran
ID 36 Impact of Improving Performance in Virtual Data Warehouse
Asadullah Hanif and Shahid Sheikh, Faculty of Computing, Shaheed Zulfiqar Ali Bhutto Institute of Science & Technology, Islamabad, Pakistan
ID 38 Minimizing the Tardiness in a Single Machine Batch Processing
Fahad Al-Ghamdi, Meshaal Al-Khaldi, Amaar Khoukhi and Muhammad Al-Slamah, Systems Engineering Department, King Fahd University of Petroleum and Minerals, Dhahran, 31261, Saudi Arabia
ID 40 Designing CRM Software for Passenger Trains System
Farshid Karimi, Rail-way Research Center, Iran
Mohammadsadegh Saremi, University of Bocconi, Iran
ID 41 An Optimal Inventory Control Planning for an Indian Industry: An Analysis
- Sharif, Faculty Affairs Office, IIT Kanpur-208016, India
ID 44 Principles of Positioning Industrial Estates
Kamran Yeganegi, Industrial Engineering Department, Islamic Azad University, Zanjan Branch, Iran
Atefeh Mojtabazadeh, Department of Urban Design, Islamic Azad University, Zanjan Branch, Iran
ID 48 Developing a Structural Method for Eliciting Criteria in Project Manager Selection
Ali Reza Afshari, Department of Industrial Engineering, Islamic Azad University, Shirvan Branch, Iran
Rosnah Mohd Yusuff, Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia
ID 49 Application of Passive Defense in Location of Industrial Estates
Kamran Yeganegi, Industrial Engineering Department, Islamic Azad University, Zanjan Branch, Iran
Elham Bayat, Department of Urban Design, Islamic Azad University, Zanjan Branch, Iran
ID 51 Conceptual Model of Health Tourism Systems
Kamran Yeganegi, Islamic Azad University – Zanjan Branch, Iran
ID 52 Application of Renewable Energies and New Technologies in Urban Planning
Kamran Yeganegi, Industrial Engineering Department, Islamic Azad University, Zanjan Branch, Zanjan, Iran
Zahra Moradi Node, Urban Engineering, Islamic Azad University of Zanjan, Iran
ID 53 Guerilla Transformation: Turning an Insurgency into a Movement
Joseph F Paris Jr, XONITEK Group of Companies, New York, NY 10167, USA
ID 54 Maintenance Modeling for Fuel Dispensers in a Chain of Gas Stations
Mehmet Savsar, Industrial & Management Systems Engineering, College of Engineering & Petroleum, Kuwait University, Safat 13060, Kuwait
ID 55 A Proposed Prediction Approach for Manufacturing Performance Processes using ANNs
- T. El-Midany, Production Engineering and Mechanical Design Department, Mansoura University, Egypt
- A. El-Baz, Industrial Engineering Department, Zagazig University, Egypt
- S. Abd-Elwahed, Production Engineering and Mechanical Systems Design Department, KAU, Saudi Arabia
William M. Goriwondo, Walter Chipambwa and Samson Mhlanga, Department of Industrial and Manufacturing Engineering, National University of Science and Technology, Bulawayo, Zimbabwe
Michael Mutingi, Department of Industrial Engineering University of Botswana, Gaborone, Botswana
ID 61 Applying Lean Six Sigma in Engineering Education at Tshwane University of Technology
Mukondeleli.G. Kanakana, Faculty of Engineering and Built Environment, Tshwane University of Technology, Pretoria, 0200, South Africa
Jan H.C. Pretorius, Faculty of Engineering and Built Environment, University of Johannesburg, JHB, 0100, South Africa
Bernard J. van Wyk, Faculty of Engineering and Built Environment, Tshwane University of Technology, Pretoria, 0200, South Africa
Hossein Dastkhan, Industrial Engineering Group, Javad University College, Yazd, Iran
Mohammad Saleh Owlia, Department of Industrial Engineering, Yazd University, Yazd, Iran
ID 64 A Mathematical Model for Profit Maximization General Lot-sizing and Scheduling Problem (PGLSP)
Narges Sereshti, Mehdi Bijari and Ghasem Moslehi, Department of Industrial and System Engineering, Isfahan University of Technology, Isfahan, Iran
Serap Akcan, Department of Industrial Engineering, Aksaray University, Aksaray 68100, Turkey
Ali Kokangul, Department of Industrial Engineering University of Cukurova, Adana 01330, Turkey
Khaled M. Gad El Mola, Department of Mechanical Engineering, Industrial Engineering Division, Faculty of Engineering, Helwan, Cairo, Egypt.
Al Kharj, KSA, Department of Mechanical Engineering, Industrial Engineering Program, College of Engineering in Al Kharj, Salman Bin Abdul Aziz University.
ID 68 Economic Evaluation of Rapid Prototyping Systems
Khaled M. Gad El Mola, Department of Mechanical Engineering, Industrial Engineering Division, Faculty of Engineering, Helwan, Cairo, Egypt.
Al Kharj, KSA, Department of Mechanical Engineering, Industrial Engineering Program, College of Engineering in Al Kharj, Salman Bin Abdul Aziz University.
ID 69 Integrated Cellular Manufacturing System Design: An Evolutionary Algorithm Approach
Michael Mutingi, Department of Mechanical Engineering, University of Botswana, Gaborone, Botswana
Charles T. Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
Samson Mhlanga and William Goriwondo, Department of Industrial and Manufacturing Engineering, National University of Science and Technology, Bulawayo, Zimbabwe
ID 73 Foreign Exchange Transaction Exposure in a Newsvendor Setting
Gopalan Srinivasan and F. J. Arcelus, Faculty of Business Administration, University of New Brunswick, Fredericton, E3B5A3, Canada
Ravi Gor, St. Kabir Institute of Professional Studies, Ahmedabad, 380054, India
ID 74 A Case Study of Production Improvement by Using Lean with Simulation Modeling
Soroor K. H. Al-Khafaji, Department of Mechanical Engineering, College of Engineering, Baghdad University, Baghdad, Iraq
Header M. R. Al-Rufaifi, Department of Mechanical Engineering, College of Engineering, Waset University, Waset, Iraq
ID 75 Genetic Algorithm based on Some Heuristic Rules for Job Shop Scheduling Problem
Amer A. Boushaala, Mohamed A. Shouman and Somaia Esheem, Department of Industrial Engineering and Manufacturing Systems, Garyounis University, Benghazi, Libya
ID 77 A Framework for a Green and Lean Supply Chain: A Construction Project Application
Raid Al-Aomar, Industrial Engineering, College of Engineering & Computer Science, Abu Dhabi University, UAE
Dua Weriakat, Department of Mechanical and Industrial Engineering, Concordia University, Montreal, Canada
ID 78 Crashing Project Activities Using Linear Programming Technique
Omar M. Elmabrouk and Fardous Aljiebali, Department of Industrial and Manufacturing System Engineering, Benghazi University, Libya
Che-Wei Tsui and Ue-Pyng Wen, Department of Industrial Engineering and Engineering Management, National Tsing Hua University, Kuang-Fu Road, Hsinchu, 300, Taiwan
ID 82 Scheduling Project Crashing Time using Linear Programming Technique
Omar M. Elmabrouk, Department of Industrial and Manufacturing System Engineering, Benghazi University, Benghazi-Libya
ID 85 Designs of Some Low Power Renewable Energies Installations
Kh. S. Karimov and Muhammad Abid, GIK Institute of Engineering Sciences and Technology, Topi, KPK, Pakistan
- U. Umarov, Physical Technical Institute of Academy of Sciences, Dushanbe, Tajikistan
ID 87 A Taxonomic Framework for Formulating Strategies in Green Supply Chain Management
Michael Mutingi, Department of Mechanical Engineering, University of Botswana, Gaborone, Botswana
Charles T. Mbohwa, Department of Quality & Operations Management, University of Johannesburg, Johannesburg, South Africa
ID 88 Decision-Making Processes of Trauma Surgeons during the Golden Hour
Eui Park, Policarpo deMattos and Daniel Miller, North Carolina A&T State University, USA
ID 89 Integrating Production Scheduling and Maintenance: Practical Implications
Laith A. Hadidi and Umar M. Al-Turki, Department of Systems Engineering, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia
- Abdur Rahim, Faculty of Business Administration, University of New Brunswick, Fredericton, NB E3B 5A3, Canada.
ID 90 Time-Risk Tradeoff of Hazmat Routing Problem in Emergency Situation
Abbas Mahmoudabadi, Department of Industrial Engineering, Payam-e-Noor University, Tehran, Iran
Seyed Mohammad Seyedhosseini, Department of Industrial Engineering, Iran University of Science and Technology, Tehran, Iran.
İzlem Tekin, Department of Management Engineering, Istanbul Technical University, Macka 34367 Istanbul, Turkey
Sıtkı Gözlü, Department of Management Engineering, Istanbul Technical University, Macka 34367 Istanbul, Turkey
ID 93 Cycle Time Analysis at Wet Stations
Anna Rotondo, Paul Young and John Geraghty, Enterprise Process Research Centre, School of Mechanical and Manufacturing Engineering, Dublin City University, Dublin, Ireland
ID 94 Angular Fuzzy Model for Projects Delay
Ali Reza Afshari, Department of Industrial Engineering, Islamic Azad University, Shirvan Branch, Iran
ID 98 A Lean Scheme for Improving Vehicle Routing Operations
Bernardo Villarreal, Mayté Sañudo, Arminda Vega, Santiago Macias and Elsa Garza, Departamento de Ingeniería, Universidad de Monterrey, San Pedro Garza García, N.L., México 66238
ID 99 Advanced Sensitivity Analysis of the Semi-Assignment Problem
Shih-Ting Zeng and Ue-Pyng Wen, Department of Industrial Engineering and Engineering Management National Tsing Hua University, 101, Section 2, Kuang-Fu Rd., Hsinchu, 300, Taiwan
Chi-Jen Lin, Department of Industrial Engineering and Management, Ta Hwa Institute of Technology, No.1, Dahua Rd., Qionglin Township, Hsinchu County 307, Taiwan
ID 100 Hospital Site Selection in Benghazi City in Libya
Ibrahim M, Busief and Mohamed A. Shouman, Department of IMSE, Faculty of Engineering
Benghazi ( Prev. Grayounis ) University, Benghazi, Libya
ID 101 An Improved Approach to Exchange Non-Rectangular Departments in CRAFT Algorithm
Danial Esmaeili Aliabadi and Behrooz Pourghannad, Faculty of Engineering and Natural Sciences
Sabancı University, Orhanli-Tuzla, 34956, Istanbul, Turkey
Mohd Nasrull Abdol Rahman, Department of Manufacturing & Industrial Engineering, Faculty of Mechanical & Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia (UTHM), 86400 Parit Raja, Johor, Malaysia
Mat Rebi Abdul Rani and Jafri Mohd Rohani, Department of Manufacturing & Industrial Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia (UTM), 81310 Skudai, Johor, Malaysia
Medjon Hysenaj, University of Shkodra “Luigj Gurakuqi”, Shkoder, Albania
Eqerem Arkaxhiu, University of Tirana, Tirane, Albania
ID 105 Meta-heuristic Approaches for the Assembly Line Balancing Problem
Adil Baykasoğlu, Department of Industrial Engineering, Dokuz Eylul University, Tınaztepe Campus, Izmir, Turkey
Şebnem Demirkol Akyol, Department of Industrial Engineering, Dokuz Eylul University, Tınaztepe Campus, Izmir, Turkey
ID 106 Selection of Optimal Maintenance Policy by Using Fuzzy Multi Criteria Decision Making Method
Siew-Hong, Ding and Shahrul Kamaruddin, School of Mechanical Engineering, Universiti Sains Malaysia, Nibong tebal, 14300, Penang, Malaysia.
ID 108 Intelligent Approach to Simulation Software Evaluation
Zeki Ayağ, Funda Samanlıoglu and Ahmet Yücekaya, Department of Industrial Engineering, Kadir Has University, 34083 Cibali, Fatih, İstanbul, Turkey
Mari Sonia, Marri Hussain Bux and Memon M. Saad, Department of Industrial Engineering and Management, Mehran University of Engineering and Technology, Jamshoro, 76062, Sindh, Pakistan
Reza Radfar, Department of Industrial Management, Faculty of Management and Economy, Islamic Azad University, Science and Research Branch, Tehran, Iran
Leila Ebrahimi, Department of Industrial Management Faculty of Management and Economy, Islamic Azad University, Science and Research Branch, Tehran, Iran
Ploytip Jirasukprasert, Warwick Manufacturing Group, The University of Warwick, Coventry, CV4 7AL, UK
Jose Arturo Garza-Reyes, School of Technology, The University of Derby, Derby, DE22 3AW, UK
Horacio Soriano-Meier, Northampton Business School The University of Northampton, Northampton, NN2 7AL, UK
Luis Rocha-Lona, National Polytechnic Institute of Mexico Business School, Mexico City, 03100, Mexico
ID 114 Inventory Location Routing Problem: A Column Generation Approach
Mateo Gutiérrez Granada and Catalina Wills Silva Department of Industrial Engineering
Universidad de los Andes, Colombia
M.S. Owlia and Ali Moslemini, Department of Industrial Engineering, Yazd University, Iran
ID 120 A Multi-Agent Architecture for Distributed Supply Chain
Bharat Bansal, School of Computer Science, University of Nottingham, UK
Nishikant Mishra, School of Management and Business, Aberystwyth University, UK
Felix T.S. Chan and A. Prakash, Department of Industrial and Systems Engineering The Hong Kong, Polytechnic University, Hung Hom, Hong Kong
Vikas Kumar, Department of Management, Dublin City University, Dublin, Republic of Ireland
ID 121 Berth Allocation Planning for Improving Container Terminal Performances
- L. Ma, F. T. S. Chan, S. H. Chung and C. S. Wong, Department of Industrial and Systems Engineering The Hong Kong Polytechnic University, Hung Hom, Hong Kong
ID 123 Optimal Budget Allocation of Health Care Resources for End Stage Renal Disease
Yu-Fan Chen and Ue-Pyng Wen, Department of Industrial Engineering and Engineering Management National Tsing Hua University, 101, Section 2, Kuang-Fu Rd., Hsinchu, 300, Taiwan
Fethi Calisir, Cigdem Altin Gumussoy, Ayse Elvan Bayraktaroglu and Burcu Kaya, Department of Industrial Engineering, Istanbul Technical University, Istanbul 34367, Turkey
ID 125 Performance Evaluation of Digital Strategy in IRIB-Yazd using the Balanced Scorecard Model
- Hoboubati , Islamic Republic of Iran Broadcasting Yazd ,Yazd, Iran M. A. Vahdatzad, M. S. Owlia and H. Hoseininasab Industrial Engineering Department, Yazd University, Yazd, Iran
ID 126 Quality Management Systems in Dairy Industry
Ozlem Yaman Keskin and Zehra Gulsunoglu, Department of Food Engineering, Istanbul Technical University, Ayazaga Campus, Istanbul 34469, Turkey
ID 127 Lean Manufacturing Design for Fishing Net Production System
Yiyo Kuo, Department of Marketing and Logistics Management, Hsing Kuo University of Management, Tainan 709, Taiwan
Taho Yang and Chiung-Hsi Hsieh, Institute of Manufacturing Engineering National Cheng Kung University, Tainan 701, Taiwan
Vincent C. Li, Department of Business Administration, National Chiayi University, Chiayi 600, Taiwan
Kang-Ting Ma and Ue-Pyng Wen, Department of Industrial Engineering and Engineering Management, National TsingHua University, Hsinchu, Taiwan 30013, R.O.C.
Chi-Jen Lin, Department of Industrial Engineering and Management, Ta Hua Institute of Technology, Hsinchu, Taiwan 30740, R.O.C.
ID 129 A Variable Capacity Parallel Machine Scheduling Problem
Emine Akyol, Department of Industrial Engineering, Eskisehir Anadolu University, Eskisehir 26470, Turkey
Tugba Saraç, Department of Industrial Engineering, Eskisehir Osmangazi University, Eskisehir 26480, Turkey
ID 130 An Application of Fuzzy numbers in Quantitative Strategic Planning Method with MCDM
Hasan Hosseini-Nasab, Department of Industrial Engineering, Yazd University, Yazd, Iran
ID 131 An Anthropometric Computer Workstation Design to Reduce Perceived Musculoskeletal Discomfort
Kemal Lale, Department of Industrial Engineering, Eastern Mediterranean University, Famagusta, North Cyprus, Mersin 10 Turkey
Orhan Korhan, Department of Industrial Engineering, Eastern Mediterranean University, Famagusta, North Cyprus, Mersin 10 Turkey
ID 132 Scenario based Service-Engineering
Volker Grienitz and André-Marcel Schmidt, University of Siegen, Germany
Birgit Oberer, Kadir Has University, Turkey
Alptekin Erkollar, Halic University, Turkey
ID 135 A Clustering Approach to Analyze the Wind Energy Potential of Mardin
Fadime Üney-Yüksektepe, Istanbul Kültür University, Turkey
Hidayet Talha Kuş and Ömer Fahrettin Demirel, Department of Industrial Engineering, Fatih University, Buyukcekmece, Istanbul 34500, Turkey
Selim Zaim, Mechanical Engineering Department, Marmara University, Kadıkoy, Istanbul 34722, Turkey
Güven Kıymaz, Department of Civil Engineering, Fatih University, Buyukcekmece, Istanbul 34500, Turkey
ID 137 Multi-Objective Economic-Statistical Design of MEWMA Control Chart
Amirhossein Amiri, Hamed Mogouie and Mohammad H. Doroudyan, Department of Industrial Engineering, Shahed University, Tehran, Iran
ID 138 Eco-Maintenance: The Improvement of Environmental Sustainability by Means of Maintenance
Margherita De Minicis and Massimo Tronci, Department of Mechanical and Aerospace Engineering, University of Rome “La Sapienza”, Via Eudossiana 18, 00184, Rome, Italy
Mario Fargnoli, Ministry of Agriculture, COSVIR III, via XX Settembre 20, 00187 Rome, Italy
ID 140 T2 Based Methods for Monitoring Gamma Profiles
Amirhossein Amiri and Mehdi Koosha, Department of Industrial Engineering, Shahed University, Tehran, Iran
Armaghan Azhdari, Department of Industrial Engineering PNU, Tehran, Iran
ID 144 Application of Text Mining in the Survey of Industrial Engineering Literature
Sara Abossedgh, Mohammad Saleh Owlia, Mohammad-Ali Vahdat and Mohammad-Reza Zare, Department of Industrial Engineering Yazd University, Iran
ID 145 Green Supply Chain Management: Creating Learning Projects in Automobile Industries
Emmanuel E. Ejim-Eze1,2 and Joe Amadi-Echendu2,3
1 National Centre for Technology Management, Federal Ministry of Science and Technology, South-South Zonal Office, Niger Delta University, Wilberforce Island Amassoma, Yenagoa, Bayelsa State, Nigeria
2 Institute of Engineering, Technology and Innovation Management (METI), Centre for Engineering and Technology Management (CETM), University of Port Harcourt, Choba, Port Harcourt, Rivers State, Nigeria
3 Department of Engineering and Technology Management, University of Pretoria, Pretoria 0002, South Africa
ID 146 Local Content Policy in Nigeria: The Need for Organizational Learning
Emmanuel E. Ejim-Eze1,2 and Joe Amadi-Echendu 2,3
1 National Centre for Technology Management, Federal Ministry of Science and Technology, South-South Zonal Office , Niger Delta University, Wilberforce Island, Amassoma, Yenagoa, Bayelsa State, Nigeria
2 Institute of Engineering, Technology and Innovation Management (METI) , Centre for Engineering and Technology Management (CETM), University of Port Harcourt, Choba, Port Harcourt, Rivers State, Nigeria
3 Department of Engineering and Technology Management, University of Pretoria, Pretoria 0002, South Africa
Kit-Nam Francis Leung, Department of Management Sciences, City University of Hong Kong, China
Enrico Bertoloni, Marco Fenaroli, Filippo Marciano and Diana Rossi, Dipartimento di Ingegneria Meccanica e Industriale, Università degli Studi di Brescia, Brescia, Italy
Paolo Cabassa, II Radiologia, Spedali Civili, Brescia, Italy
ID 153 Quadratic Multiple Knapsack Problem with Setups and a Solution Approach
Nilay Dogan, Kerem Bilgiçer and Tugba Saraç, Industrial Engineering Department, Eskisehir Osmangazi University, Meselik 26480, Eskisehir Turkey
ID 155 AMulti-Criterion Decision-Making on Preventive Maintenance
- Faghihinia, Department of Industrial Engineering, Islamic Azad University – Najafabad Branch, Isfahan, Iran
- Mollaverdi, Department of Industrial Engineering, Isfahan University of Technology, Isfahan, Iran
Mohammad Abaee Shoushtary, Amir Asgary Zadeh and Mohammad Ali Vahdatzad, Department of Industrial Engineering, Yazd University, Yazd, Iran
Peter O. Idialu, Oye Ibidapo-Obe and Kingsley E. Abhulimen, Department of Systems Engineering, Faculty of Engineering, University of Lagos, Nigeria
ID 159 Feasibility Study of Wind-Solar Powered Farm Irrigation System: Case Study
Mohammad Abaie Shoushtary, Yazd University, Yazd, Iran
ID 162 Multiple Robot Motion Planning using Voronoi Diagram and Tabu Search
Mohammad Abaie Shoushtary, Yazd University, Yazd, Iran
ID 163 Inventory Model Involving Controllable Lead Time through New Approach
Saeed Poormoaied, Department of Industrial Engineering, Ferdowsi University of Mashhad, Iran
Mohsen Dastpak, Department of Financial Engineering Economic Sciences University, Tehran, Iran
ID 164 Multi-Objective Mathematical Model for Time and Space Assembly Line Balancing Problem
Maghsud Solimanpur, Faculty of Engineering, Urmia University, Urmia, West Azerbaijan Province, Iran
Behnaz Jaberi, Faculty of Engineering, Urmia University of Technology, Urmia, West Azerbaijan Province, Iran.
ID 166 A Systems Approach to Implementing Systems Engineering within the UT Health Institutions
Victoria Jordan , Office of Performance Improvement , University of Texas MD Anderson Cancer Center, Houston, TX 77030, USA
Leslie Carruth, Health Affairs, The University of Texas System, Austin, TX 78701, USA
ID 167 Genetic Algorithm for University Timetable Planning in FTI
Dedy Suryadi and Rizaldy Pilipus, Department of Industrial Engineering, Parahyangan Catholic University, Bandung 40141, Indonesia
ID 169 An Integrated CAD/CAPP System based on STEP Features
Saleh M. Amaitik, Industrial and Manufacturing Systems Engineering Department, Benghazi University, Benghazi, Libya
ID 171 A Decision Support System for Robot Selection based on Axiomatic Design Principles
Mehmet Cagatay Bahadir, Department of Management Engineering, Istanbul Technical University, Faculty of Management, 34367 Macka, Istanbul, Turkey
Sule Itir Satoglu, Department of Industrial Engineering, Istanbul Technical University, Faculty of Management, 34367 Macka, Istanbul, Turkey
ID 175 Service Level within an Integrated Model for Warehouse and Inventory Planning
Omer F. Yılmaz and Murat Baskak, Department of Industrial Engineering, Istanbul Technical University, Maçka, İstanbul 34367, Turkey
Hikmet Erbıyık, Department of Industrial Engineering, Yalova University, Yalova 77200, Turkey
Aysenur Budak, Department of Industrial Engineering, Istanbul Technical University, Maçka, İstanbul 34367, Turkey
Endang Chumaidiyah, Industrial Engineering Faculty, IT Telkom, Jl. Telekomunikasi No. 1, Ters Buah Batu, Bandung, Indonesia
ID 177 The Research of Supplier Quality Management and Development in a Washing Machine Factory
Özcan Akçaoğlu, Graduate School of Science Engineering and Technology, Engineering Management Departmant, Istanbul Technical University, Maçka, Istanbul, Turkey
ID 179 Multi Objective Mixed Model Assembly Line Balancing
Nihan Karaca, Rifat Gurcan Ozdemir and Fadime Üney-Yüksektepe, Istanbul Kultur University, Turkey
ID 180 Quality Assessment of Remote Sensing Digital Image Processing
Elif Aydin, Atilim University, Ankara, Turkey
Abdelhakim Abdelhadi, Industrial Engineering Department, King Khalid University, Abha, Saudi Arabia
Hamid Seifoddini, Industrial Engineering Department, University of Wisconsin-Milwaukee, Wisconsin, USA
Mohammed Almomani, Industrial Engineering Department, Jordan University of Science and Technology, Irbid, Jordan
ID 183 Using Discrete Event Simulation to Model Smelting Process with Complex Constrains
- Noorossana, Iran University of Science and Technology, Tehran, Iran
H.R. Izadbakhsh, Tarbiat Moaalem University, Tehran, Iran
- Moeni, A. Rahimi and M. Memarzadeh, Sharcheshmeh Copper Company, Kerman, Iran
- Mortezavi, Tarbiat Moaalem University, Tehran, Iran
ID 184 Effect of Managerial Changes on the Corporation Performance: DEA based Method
Rassoul Noorossana, Hamidreza Izadbakhsh, Majid Esmaelian and M. Ghasemi, Iran University of Science and Technology, Iran
ID 185 Monte-Carlo Simulation for Beam Shaping Assembly of Boron Neutron Capture Therapy
Farshad Faghihi, Department of Nuclear Engineering, School of Mechanical Engineering, Shiraz University, Shiraz, Iran
ID 186 An Artificial Immune System Approach for Flexible Job Shop Scheduling Problem
Aydin Sipahioglu, Alper Aladag, Department of Industrial Engineering, Osmangazi University, Eskisehir, 26480, Turkey
ID 187 Sustainable Management in the Synfuels Sector in South Africa
- T. Maimbo and C. Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
- Mutingi, Department of Mechanical Engineering, University of Botswana, Gaborone, Botswana
Mohamed A. Shalaby and Tamer F. Abdelmaguid, Department of Mechanical Design and Production, Faculty of Engineering, Cairo University, Giza 12613, Egypt
Zakaria Y. Abdelrasol, Industrial Engineering Department, Faculty of Engineering, Fayoum University, Fayoum, Egypt
Horacio Soriano-Meier, Northampton Business School the University of Northampton, Northampton, NN2 7AL, UK
Jose Arturo Garza-Reyes, School of Technology, The University of Derby, Derby, DE22 3AW, UK
Jasdev Singh Lal, Northampton Business School the University of Northampton, Northampton, UK
Luis Rocha-Lona, National Polytechnic Institute of Mexico Business School, Mexico City, 03100, Mexico
ID 190 Integrated Control Chart System: A New Charting Technique
- Shamsuzzaman, Department of Industrial Engineering and Management, University of Sharjah, Sharjah, UAE
ID 193 Effect of Gender Differences on Occupational Stress among Engineering Workshop Trainees
Bahador Keshvari and Matrebi Abdulrani, Department of Mechanical Engineering, University Technology Malaysia, Skudai, Johorbahru 681310 Malaysia
- M. A. Suliman, Mechanical Engineering Department, University of Bahrain, P. O. Box 32038, Isa Town, Bahrain
ID 196 Study of Electrochemical Polishing Applications in Some Alloys for High Surface Finish
Niveen J. Abdalkadir and Materials Engineering, University of Technology, Baghdad, Iraq
Hussain M. Yousif, Nasser State Company, Baghdad, Iraq
Afagh Malek and Azanizawati Ma’aram, Department of Manufacturing and Industrial Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia
ID 198 Performance Analysis in Semantic Web Services Composition
Hassina Nacer Talantikite, Computer Science Department, A/Mira University, Bejaia Algeria,
Djamil Aissani and Karima Adel Aissanou, Laboratory LAMOS, University A/Mira, Bejaia Algeria, Laboratory LAMOS, University A/Mira, Bejaia Algeria
Davood Navabi Asl, Department of Architecture, Science and Research Branch, Islamic Azad University, Sistan and Baluchestan, Zahedan, Iran, Postcode 9817697794, End of Khayam Street, Zahedan, Iran
Morteza Baghbani, Department of Management, Science and Research Branch, Islamic Azad University, Sistan and Baluchestan, Zahedan, Iran, Postcode 9817697794, End of Khayam Street, Zahedan, Iran
ID 213 Reliability Aspects in Z-Pinned Laminated Composites
- R. Soni, M. Al-Romaihi, J. R. Wirthlin, and A. B. Badiru, Air Force Institute of Technology, Wright Patterson AFB, OH 45432, USA
Stephen Clay, AFRL/RB, Wright Patterson AFB, OH 45433, USA
Hassan Gholizadeh and Reza Tavakkoli-Moghaddam, Department of Industrial Engineering, Tehran University, Tehran, Iran,
Behnam Tootooni, Department of Industrial Engineering, Amirkabir University of Technology, Tehran, Iran
William Faulkner, William Templeton, David Gullett and Fazleena Badurdeen, College of Engineering, University of Kentucky, Lexington, Kentucky 40506, USA
Ibrahim Masood, Faculty of Mechanical and Manufacturing Engineering, 86400 Parit Raja, Batu Pahat, Johor, Malaysia
Adnan Hassan, Faculty of Mechanical Engineering 81310 UTM Skudai, Johor, Malaysia
ID 219 Developing a Mathematical Model for Team Configuration in Creativity Process
Iraj Mahdavi, Department of Industrial Engineering Mazandaran University of Science and Technology, Babol, Iran
Hamed Fazlollahtabar, Faculty of Industrial Engineering, Iran University of Science and Technology, Tehran, Iran
Amin Aalaei, Faculty of Industrial Engineering, Amirkabir University of Technology, Tehran, Iran
Mohammad Hassan Yahyanejad, Mazandaran Gas Company Sari, Iran
Kahtan Al-Khazraji, Jawad Kadhim and Payman Sahbah Ahmed, Materials Engineering Department, University of Technology, Baghdad, Iraq
ID 224 Genetic Algorithms in Speech Recognition Systems
Zahira Benkhellat and Ali Belmehdi, Department of Informatics, Bejaia University, Algeria
ID 226 Study of Access Control Issue for Web Services
Hadiseh Seyyed Alipour, Department of Software Engineering, Qazvin Islamic Azad University, Qazvin 1416-34185, Iran
Mehdi Sabbari, Department of Software Engineering, Qazvin Islamic Azad University, Qazvin 1416-34185, Iran
ID 227 Definition of Action and Attribute Based Access Control Rules for Web Services
Hadiseh Seyyed Alipour, Department of Software Engineering, Qazvin Islamic Azad University, Qazvin 1416-34185, Iran
Mehdi Sabbari, Department of Software Engineering, Qazvin Islamic Azad University, Qazvin 1416-34185, Iran
ID 228 Sub-Contractor Selection in General Contractor Organizations Using Interval-Valued Fuzzy
Hassan Hadipour, Department of Industrial and Mechanical Engineering, Azad University, Qazvin, Iran
Roozbeh Azizmohammadi, Department of Industrial Engineering, Payam-e-Noor University, Tehran, Iran
Abbas Mahmoudabadi, Department of Industrial Engineering, Payam-e-Noor University, National Road Management Center, Road Maintenance and Transportation Organization, Tehran, Iran
ID 229 A Survey on Development of Virtual Cellular Manufacturing Systems and Related Issues
- R. Esmaeilian and Maryam Hamedi, Department of Mechanical and Manufacturing Engineering, University Putra Malaysia 43400, Serdang, Selangor, Malaysia
Adnan I.O. Zaid, Industrial Engineering Department, Jordan University, Amman, Jordan
Safwan M.A. Al Qawabah, Mechanical Engineering Department, Tafila Technical University, Tafila, Jordan
ID 231 Analysis of Permissible Delay in Payment Policy for Sustainable Business Development
Gede Agus Widyadana and Nyoman Sutapa, Department of Industrial Engineering, Petra Christian University, Surabaya 60236, Indonesia
- Gholipour-Kanani, Department of Industrial Engineering, Islamic Azad University – Research and Science Branch, Tehran, Iran
- Tavakkoli-Moghaddam, Department of Industrial Engineering , University of Tehran , Tehran, Iran
- Cheraghalizadeh, Department of Industrial Engineering Mazandaran University of Science and Technology, Babol, Iran
- Mahmoodjanloo, Department of Industrial Engineering, Amir Kabir University, Tehran, Iran
Tamer F. Abdelmaguid and Tarek M. El-Hossainy, Department of Mechanical Design and Production, Faculty of Engineering, Cairo University, Giza 12613, Egypt
- Meglouli, A. Chebouba and Y. Naoui, Laboratoire d’électrification des entreprises industrielles, University of Boumerdes, Algeria
ID 236 The Application of Risk Management into the Value Engineering
Amin Safari, Ali Mostafaeipour and Razieh Yousefi, Yazd University, Iran
Mohammad Abaee Shoushtary, Department of Industrial Engineering, Yazd University, Yazd, Islamic Republic of Iran
Amir Asgarizadeh, Department of Industrial Engineering Yazd University, Yazd, Islamic Republic of Iran
Mohammad Ali Vahdat-zad, Department of Industrial Engineering, Yazd University, Yazd, Islamic Republic of Iran
Amir Hossein Dehestani Monfared, Department of Business Administration, Faculty of Management and Accounting, Islamic Azad University (IAU), Qazvin Branch, Qazvin, Iran
Reza Kiani Mavi, Department of Industrial Management, Faculty of Management and Accounting, Islamic Azad University (IAU), Qazvin Branch, Qazvin, Iran
Sakine Abbas Khakiani, Department of Business Administration, Faculty of Management and Accounting, Islamic Azad University (IAU), Qazvin Branch, Qazvin, Iran
ID 239 Option Pricing for Electricity Commodity in Turkish Power Market
Ahmet Yücekaya, Zeki Ayağ and Funda Samanlıoğlu, Department of Industrial Engineering, Kadir Has University, Cibali, Istanbul, Turkey
ID 240 Flexible Labor Assignment in Cellular Manufacturing System (A Simulation and DEA Approach)
Farimah Mokhatab Rafiei and Aliasghar Dehghan, Department of Industrial Engineering, Isfahan University of Technology, Isfahan, Iran, 84156-83111
Mohsen Yousefi, Department of Industrial Engineering, Yazd University, Yazd, 89195-741, Iran
Seyed Saeed Hosseinioun, Department of Industrial Engineering, University of Science and Culture, Tehran, 13145-871, Iran
Firoozeh Taghikhah, Department of Management, Ferdowsi University, Mashhad, 91837-178, Iran
D 242 Segmentation Analysis with Self-Organizing Maps
Dicle Tosunlar, Department of Industrial Engineering, Istanbul Technical University, Macka, Istanbul 34367, Turkey
Umut Asan, Department of Industrial Engineering, Istanbul Technical University, Macka, Istanbul 34367, Turkey
ID 243 Stochastic Lot-Sizing: Maximising Probability of Meeting Target Profit
Mehdi Bijari and Hajar Shirneshan, Department of Industrial and System Engineering, Isfahan University of Technology, Isfahan, Iran
ID 244 Modeling of Value Chain Processes in Conglomerate Organizations
Aboozar Mehrmanesh, Department of Management University of Tehran, Tehran, Iran
Mohammad Bavar, Department of Industrial Engineering, Iran University of Science and Technology, Tehran, Iran
Alireza Bafandeh, Department of Mechanical Engineering University of Shahid Rajaei, Tehran, Iran
ID 245 A System Design for Biomass to Energy Conversion Plants
Şebnem Yılmaz, Department of Industrial Engineering, Dokuz Eylül University, 35160 İzmir, Turkey
Hasan Selim, Department of Industrial Engineering, Dokuz Eylül University, 35160 İzmir, Turkey
ID 247 Realization of an Automatic Solar Tracker for a Concentrator
Malika Yaici and Soraya Tighidet, Computer Department, University of Bejaia, Bejaia, Algeria
ID 249 Assessing the Energy Efficiency of Industrial Sector: Artificial Intelligence Approach
Oludolapo A. Olanrewaju, Department of Industrial Engineering, Tshwane University of Technology, Private bag X 680, Pretoria 0002 South Africa
Adisa A. Jimoh, Department of Electrical Engineering Tshwane University of Technology, Private bag X 680, Pretoria 0002 South Africa
Pulek A. Kholopane, Department of Industrial Engineering University of Johannesburg, South Africa
Rachid Mhamdia1, B. Bachir Bouiadjra1, 2, B. Serier1, and M. Belhouari1
1LMPM, Department of Mechanical Engineering, University of Sidi Bel Abbes, Cité Ben M’hidi, Sidi Bel Abbes, Algeria
- Bachir Bouiadjra1, 2
2 Mechanical Engineering Department, College of Engineering, King Saud University, Riyadh, Saudi Arabia
ID 253 The Patch Shape Effects on the Performances of Bonded Composite Repair in Aircraft Structures
Rachid Mhamdia1, B. Bachir Bouiadjra1, 2, B. Serier1, M.Belhouari1
1LMPM, Department of Mechanical Engineering, University of Sidi Bel Abbes, BP 89, Cité Ben M’hidi, Sidi Bel Abbes, Algeria
- Bachir Bouiadjra1, 2
2 Mechanical engineering department, College of Engineering, King Saud University, Riyadh, Saudi Arabia
ID 254 A Truncation in the Overflow Model
Karima Adel-Aissanou, Karim Abbas and Djamil Aissani, LAMOS, Laboratory of Modeling and Optimization of Systems, University of Bejaia, Bejaia, Algeria
Mehdi Najafi and Kourosh Eshghi, Department of Industrial Engineering, Sharif University of Technology, Tehran, 14598, Iran
Mohammad Rahat Uddin, S.M. Tofayel Ahmad and Munira Jahan, Bangladesh Bank, Head Office, Dhaka, Bangladesh
Tania Sultana, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
Milad Ziaeian, Department of Business Administration, Faculty of Management and Accounting, Islamic Azad University (IAU), Qazvin Branch, Qazvin, Iran
Reza Kiani Mavi, Department of Industrial Management, Faculty of Management and Accounting, Islamic Azad University (IAU), Qazvin Branch, Qazvin, Iran
Zohre Zarabadi Pour, Department of Business Administration, Faculty of Management and Accounting, Islamic Azad University (IAU), Qazvin Branch, Qazvin, Iran
ID 258 Implementing Lean Methodologies in Healthcare Systems – A Case Study
Joseph C. Chen, Department of Industrial and Manufacturing Engineering and Technology, Bradley University, Peoria, IL 61625, U.S.A.
Chaitanya Thota, Caterpillar Inc, Peoria, IL, 61625 U.S.A.
ID 259 Noise in the Workplace: Proposal for Decreasing Noise Pollution.
Dimitri Kaliakatsos, Giovanni Mirabelli and Teresa Pizzuti, Department of Mechanical Engineering, University of Calabria, Arcavacata di Rende, 87036, Italy
ID 261 Modeling of an Agro-Food Traceability System: The Case of the Frozen Vegetables
Teresa Pizzuti, Giovanni Mirabelli, Department of Mechanical Engineering, University of Calabria, Rende 87060, Italy
Fernando Gómez-González, Miguel A. Sanz-Bobi, Department of Information Systems Engineering, Comillas Pontifical University, Madrid 28015, Spain
ID 263 E-Commerce Adoption of Hotels in Turkey
Fethi Calisir, Ayse Elvan Bayraktaroglu, Cigdem Altin Gumussoy and Eser Esirgen, Department of Industrial Engineering, Faculty of Management, Istanbul Technical University, 34367 Macka-Istanbul, Turkey
ID 264 Analysis of Educational Supply Chain Management Model: A Case Study Approach
Bishwajit Banik Pathik, Department of Electrical and Electronic Engineering, American International University Bangladesh, Banani, Dhaka 1213, Bangladesh
Musawer Tahsin Chowdhury, American International University Bangladesh, Banani, Dhaka 1213, Bangladesh
Dr. Md. Mamun Habib, Department of Operations Management American International University Bangladesh, Banani, Dhaka 1213, Bangladesh
Simin Poursheikh Ali and Mehdi Bijari, Department of Industrial and System Engineering, Isfahan University of Technology, Isfahan, Iran
G.M. Satyanarayana and H. V. Ramakrishna, Department of Mechanical Engineering, Malnad College of Engineering, Hassan-573102, Karnataka, India
C.T. Jayadeva, Department of Mechanical Engineering, AIT, Chikmagalur 577102, Karnataka, India
ID 268 Automatic New Topic Identification in Search Engine Transaction Log Using Goal Programming
Fatih Çavdur, Seda Özmutlu, H. Cenk Özmutlu, Duygu Yilmaz Eroğlu and Burcu Çağlar Gençosman, Industrial Engineering Department, Uludag University, Gorukle, Bursa 16059, Turkey
Melike Meterelliyoz Kuyzu, TOBB Economy and Technology University, Turkey, Canan Gunes Corlu, Bilkent University, Turkey
ID 270 A Statistical Evaluation of Variance Estimation and Subgrouping in XBAR Control Charts
Taylan A. Ula, Department of Systems Engineering, Yeditepe University, Istanbul 34755, Turkey
Mohd Fahrul Hassan, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor, Malaysia
Muhamad Zameri Mat Saman and Safian Sharif, Department of Manufacturing and Industrial Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 Skudai, Johor, Malaysia
Badrul Omar, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor, Malaysia
ID 275 A Sentiment Analysis as a Tool to Identify The Status Of Universities: The Case of ITU
Mine Işık, Department of Industrial Engineering, Istanbul Technical University, Istanbul, Turkey
Başar Öztayşi, Department of Industrial Engineering, Istanbul Technical University, Istanbul, Turkey
Kübra H. Fenerci, Department of Industrial Engineering Boğaziçi University, Istanbul, Turkey
ID 279 University Students’ Perception and Attitudes towards Functional Foods in Istanbul
Sena Bilgiç and Alev Yüksel, Department of Food Engineering, Istanbul Technical University, Maslak, Istanbul 34469, Turkey
ID 281 Three-Level Service Contract between Manufacturer, Agent and Customer (Game Theory Approach)
Nafiseh Shamsi Gamchi, Department of Industrial Engineering, Alzahra University, Tehran, Iran
Maryam Esmaeili, Department of Industrial Engineering Alzahra University, Tehran, Iran
Mohammad-Ali Saniee Monfared, Department of Industrial Engineering Alzahra University, Tehran, Iran
ID 282 A Multi-Criteria Sustainability Model for an Effective WEEE Management System
Maria Grazia Gnoni and Fabiana Tornese, University of Salento, Italy
ID 283 Three Multiple Criteria Models for Power Generation Expansion Planning: A Review
Abu S. M. Masud and M. Bayram Yildirim, Department of Industrial and Manufacturing Engineering Wichita State University, Wichita, Kansas 67260-0035, USA
ID 284 A Cross Entropy-Genetic Algorithm Approach for Multi Objective Job Shop Scheduling Problem
Budi Santosa and Liliek Nurkhalida, Department of Industrial Engineering, Surabaya Institute of Technology, Indonesia
Rouzbeh Ghousi, Saharnaz Mehrani and Morteza Momeni, Department of Industrial Engineering, Iran University of Science and Technology, Narmak, Tehran 16846-13114, Iran
Sina Anjomshoaa, Graduate School of Management and Economics, Sharif University of Technology, Azadi, Tehran 11365-11155, Iran
ID 287 Mixed-Model Two-Sided Assembly Line Balancing Using a Modified Genetic Algorithm
Raghda B. Taha, Department of Engineering Design and Production Technology, Faculty of Engineering and Material Science, German University in Cairo, Egypt
Amin El-Kharbotly, Nahid Afia and Yomna Sadek, Department of Design and Production Engineering Faculty of Engineering, Ain Shams University, Cairo, Egypt
ID 288 Preference Extraction from EEG: An Approach to Aesthetic Product Development
Golam M.M. Aurup and Ali Akgunduz, Department of Mechanical and Industrial Engineering, Concordia University: EV004.217, 1455 de Maisonneuve Blvd, West, Montreal, Quebec H3G 1M8, Canada
ID 289 Cycle Time Reduction using Lean Six Sigma in Biopharmacuetical Industry
Abdullah Ismail, Jaharah A. Ghani, Mohd Nizam Ab Rahman, Rizauddin Ramli, and Che Hassan Che Haron, Department of Mechanical and Material Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
ID 290 An Integer Programming Approach to Air Traffic Management Problem
Golbarg Moeini, and Ali Akgunduz, Department of Mechanical and Industrial Engineering, Concordia University, Montreal, Quebec Canada
Brigitte Jaumard, Department of Computer Science and Software Engineering, Concordia University, Montreal, Quebec Canada
ID 293 Managing Knowledge in Aircraft Engineering – An Operations-Based Approach
Rafed Zawawi, Hasan Akpolat and Ravindra Bagia, School of Systems, Management and Leadership, Faculty of Engineering and Information Technology, University of Technology, Sydney, NSW 2007, Australia
ID 295 Principles of Robust Design
Nicolo Belavendram, Faculty of Engineering and Science, UniversitiTunku Abdul Rahman, Jalan Genting Kelang, 53300 Setapak, Kuala Lumpur, Malaysia
Armagan Bayram and Senay Solak, Isenberg School of Management, University of Massachusetts, Amherst, Massachusetts 01003, USA.
ID 297 Systems Dynamics Application in Project Management
Zeynep Ocak, Department of Systems Engineering, Yeditepe University, Istanbul, Turkey
Siew-Hong Ding, Nur Amalina Muhammad, Noor Hanisah Zulkurnaini, Amanina Nadia Khaider and Shahrul Kamaruddin, School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus, 14300 Nibong Tebal, Penang, Malaysia
Leila Emami, Department of Industrial Engineering, College of Engineering, University of Yazd, Yazd 89195-741, Iran
ID 301 Effective Preventive Maintenance Scheduling: A Case Study
Hasnida Ab-Samat, Livendran Nair Jeikumar, Ernnie Illyani Basri, Nurul Aida Harun and Shahrul Kamaruddin, School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus, 14300 Nibong Tebal, Penang, Malaysia
ID 303 Indian Continuing Engineering Education: Challenges and Opportunities
Seema Singh, Department of Humanities, Delhi Technological University, Delhi- 110 042, India
ID 305 Status of Quality Management in Australian Manufacturing SMEs
Khawaja Khurram Khurshid, School of Management and Marketing, Deakin University, Burwood Campus, Vic 3125, Australia
Maneesh Kumar, Cardiff Business School Cardiff University, Cardiff – CF10 3EU, UK
Dianne Waddell, Faculty of Business and Law, Deakin University, Burwood Campus, Vic 3125, Australia
ID 306 Minimizing the Expected Number of Tardy Jobs in Dynamic Flow Shop with Stochastic Due Dates
Ali Elyasi and Nasser Salmasi, Department of Industrial Engineering, Sharif University of Technology, Tehran, Iran
ID 308 Factor Analysis and Response Surface Optimization for Copper Removal from Aqueous Solutions
Burcu Çağlar Gençosman, Industrial Engineering Department, Uludag University, Gorukle, Bursa 16059, Turkey
Âli Yurdun Orbak, Industrial Engineering Department, Uludag University, Gorukle, Bursa 16059, Turkey
İlkün Orbak, Industrial Engineering Department, Maltepe University, Maltepe, Istanbul 34857, Turkey
ID 309 Multi-Period Cell Loading in Cellular Manufacturing Systems
Gökhan Eğilmez and Gürsel A. Süer, Industrial and Systems Engineering, Russ College of Engineering and Technology, Ohio University, Athens, OH, 45701 USA
ID 310 Designing an Effective Scheduling Scheme Considering Multi-level BOM in Hybrid Job Shop
Sumin Han, Jinwu Seo and Jinwoo Park, Department of Industrial Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul, Korea
ID 311 Evaluation and Student Perception of Augmented Reality-Based Design Collaboration
Chih-Hsiang Ko and Ting-Chia Chang, Department of Industrial and Commercial Design, National Taiwan University of Science and Technology, Taipei, Taiwan, ROC
Fikri Dweiri, Sharafuddin Ahmed Khan and M. Shamsuzzaman, Department of Industrial Engineering and Management,University of Sharjah, PO Box 27272, Sharjah, UAE
ID 315 A New Multi objective Job shop Scheduling with Setup Times using a Hybrid Metaheuristics
Leila Emami and Mohammad Bagher Fakhrzad, Department of Industrial Engineering, University of Yazd, Yazd 89195, Iran
Behrouz ArbabShirani, and Hamid Reza Muosakhani, Department of Industrial Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran
ID 319 Fuzzy Sliding Mode Speed Controller Design of Induction Motor Drives
- Naceri, T. Laamayad and S. Belkacem, Department of Electrical Engineering, Batna University, Batna, Algeria
- Benbrahim, Department of Industrial Engineering, University of Batna, Batna, Algeria
ID 320 Performance Efficiency of Turkish Manufacturing SMEs using DEA
Muhammet Enis Bulak and Ali Türkyılmaz, Department of Industrial Engineering, Fatih University, Buyukcekmece, Istanbul, Turkey
Metin Şatır, KOSGEB, Mamak,Baskanlık Binası, Ankara, Turkey
Ömer Fahrettin Demirel, Department of Industrial Engineering, Fatih University, Buyukcekmece, Istanbul, Turkey
ID 321 Stochastic Data Analysis and Modeling of a Telephone Call Center
- S. Shafae, M. H. Elwany, M. N. Fors and Y. Abouelseoud, Production Engineering Department, Faculty of Engineering, Alexandria University, Alexandria 21544, Egypt
ID 322 Engineering Education and the Entrepreneurial Mindset at Lawrence Tech
Don Reimer and Ahad Ali, Lawrence Technological University, Southfield, Michigan, USA
ID 323 A Heuristic Based on Integer Programming for the Vehicle Routing Problem with Backhauls
Gulcin Dinc Yalcin and Nihal Erginel, Department of Industrial Engineering, Anadolu University, Eskisehir, Turkey
ID 324 Implementation of Lean Manufacturing Strategies at Your Organization
Daw Alwerfalli and Badih Jawad, A. Leon Linton Department of Mechanical Engineering College of Engineering, Lawrence Technological University, 2100 W. Ten Mile Road, Southfield, Michigan 48075, USA
- C. Jha and Sandhya Makkar, Department of Operational Research, University of Delhi, Delhi- 110007, India
Victor P. P. Esteves, Environmental Engineering Program, Polytechnic School, Federal University of Rio de Janeiro, Brazil
Cláudia do R. V. Morgado, Environmental Engineering Program, Polytechnic School, Federal University of Rio de Janeiro, Brazil
Vassilis C. Gerogiannis and Vasiliki Kazantzi, Department of Project Management, Technological Education Institute (TEI) of Larissa, Larissa, GR-41110, Greece
Marjorie Belinelli, Gilberto F. M. Souza and Erick M. H. Portugal, Department of Mechanical Engineering, EPUSP- Polytechnic School of São Paulo University, São Paulo, SP 05508-900, Brazil
Emerson Kaminski, CTUP – Technological Center of the Positive University, Positive University, Curitiba, Paraná 80730-460, Brazil
ID 330 The Design of Product Recovery Network: A New Mixed Integer Programming Model
Neslihan Demirel and Hadi Gökçen, Gazi University, Faculty of Engineering, Department of Industrial Engineering, Maltepe, Ankara, Turkey
ID 331 Implementation of Set Parts System in Malaysian Automotive Industry
Suhartini Mohd Jainury1,2, Rizauddin Ramli1 and Mohd Nizam Abd Rahman1, Jaharah Abd Ghani1 and Dzuraidah Abd Wahab1, 1Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi Selangor, Malaysia
2Department of Mechanical Engineering, Politeknik Sultan Azlan Shah, 35950 Behrang, Perak, Malaysia
Azhari Omar3, 3Department of Manufacturing Solution, GICT PROTON, 40918 Shah Alam, Selangor, Malaysia
ID 333 A Generalized Cost Malmquist Index to the Productivities of Units with Negative Data in DEA
Shabnam Razavyan, Department of Mathematics, Islamic Azad University, South Tehran Branch,Tehran Iran
Ghasem Tohidi, Department of Mathematics, Islamic Azad University, Central Tehran Branch, Tehran-Iran
ID 334 Multi-item EOQ Calculation in Presence of Warehouse Constraints: A Simulative Analysis
Raffaele Iannone, Salvatore Miranda and Stefano Riemma, Department of Industrial Engineering, University of Salerno, Via Ponte don Melillo, 1 – Fisciano (SA), Italy
Seyed Mohamad Seyed Hosseini, Seyed Ftatemeh Golriz Gashti and Taha Mokfi, Department of Industrial Engineering, Islamic Azad University, Science and Research Branch, Tehran, Iran
ID 338 A Review: Different Views of Customer Relationship Management
Shahnaz Piroozfar and Reza Yaghini, Industrial Engineering Department, Islamic Azad University, South Tehran Branch, Tehran, Iran
ID 339 Cross Efficiency of Decision-Making Units with Negative Data in Data Envelopment Analysis
Ghasem Tohidi, Department of Mathematics, Islamic Azad University – Central Tehran Branch, Tehran, Iran
Shabnam Razavyan, Department of Mathematics, Islamic Azad University – South Tehran Branch, Tehran, Iran
ID 341 Physical and Interactive Products Usability Evaluation Method
Reem Alkadeem, Department of Industrial Engineering, Alexandria University, Alexandria, Egypt
ID 342 Sinergy among Engineering Techniques to Simulate a Socioeconomic System
Diego José Gómez Montoya, Industrial Engineering: Distrital Francisco José de Caldas, University, Bogotá, Colombia
ID 343 A Development of Hybrid Cross Entropy-Tabu Search Algorithm for Travelling Repairman Problem
Budi Santosa and Muchammad Aminuddin, Department of Industrial Engineering, Surabaya Institute of Technology, Indonesia
Md Tanbiruj Jaman, Department of Industrial and Manufacturing Engineering, Wichita State University, Wichita, Kansas 67208, USA
ID 346 Resource Leveling in Fuzzy Project Scheduling
Mohsen Bagheri, Department of Industrial Engineering, Islamic Azad University, Science and Research Branch, Tehran, Iran
Sadjad Institute of Higher Education, Mashhad, Iran
S.Hessam Mahmoudi, Sadjad Institute of Higher Education, Mashhad, Iran
- Boudouda, GMP-CReSTIC Laboratory, University of Champagne-Ardenne, 9, Rue du Québec 10023 Troyes Cedex – France
- Naceri and S. Belkacem, Department of Electrical Engineering University of Batna, Algeria
ID 349 Modeling a Real-World University Timetabling Problem
Mohsen Bagheri, Islamic Azad University, Science and Research Branch, Sadjad Institute of Higher Education, Iran
ID 350 Scheduling with Agreements: A MILP-based Formulation with a Polynomial Result
Bendraouche M., Faculty of Sciences, Saad Dahleb University, Route de Soumaa-Blida, BP 270, Blida, Algeria
Boudhar M., Faculty of Mathematics USTHB University BP 32, El-Alia, Bab-Ezzouar, Algiers, Algeria
ID 352 The Dynamic Design of Reverse Logistics Network with Fuzzy Incentive-Dependent Return
Farzad Dehghanian, Mohammad Asghari, Department of industrial engineering, Ferdowsi University of Mashhad, Azadi Sq., Mashhad, Iran
ID 353 Effective Implementation of Cycle Time Reduction in a Manufacturing Unit: A Case Study
Dattatraya Bhise, Dronacharya College of Engineering, India
Morteza Baghbani, Department of Management, Science and Research Branch, Islamic Azad University, Sistan and Baluchestan, Zahedan, Iran, Postcode 9817697794, End of Khayam Street, Zahedan, Iran
Davood Navabi Asl, Department of Architecture, Science and Research Branch, Islamic Azad University, Sistan and Baluchestan, Zahedan, Iran, Postcode 9817697794, End of Khayam Street, Zahedan, Iran
ID 355 Design of Training Program for Green Marketing Sales Personnel
Ashish Gadekar, Dept, Management Studies, Anand Engineering College Agra, India
- K. Gupta, Studies in Management, Devi Ahilya University, Indore, India
- R. Chaudhuri, Anand Engineering College Agra, India
Rimalini Gadekar, Dept of Mechanical Engineering, Government Polytechnic Nagpur, India
ID 357 Developing the Balanced Scorecard Framework for Higher Education: Conceptual Study
Abdulsattar Mohammad Al-Ali, Industrial Engineering, Al Ain University of Science and Technology, Al Ain, U.A.E
ID 358 Non-Traditional Inventory Models under Stochastic Demand
Russell King, Don Warsing, James Lavin and Nils Buch, North Caronia State University, USA
Semra Sebnem Ahiska, Galatasaray University, Turkey
ID 360 Implementation of Advanced Manufacturing Technology as Tool for Manufacturing Industries
Ghulam YasinShaikh, H.B Marri, R.A Sohag, M. AslamUqaili, Shaheen Aziz and ShakeelShaikh, Department of Industrial Engineering and Management, Department of Electrical Engineering, Mehran University of Engineering & Technology, Jamshoro Pakistan
1Muhammad Shakil Pervez, 2S.M. Tofayel Ahmad, 3Tania Sultana 4S.M. Arifuzzaman and 5Rownak Chowdhury
1 Department of Operations Management, American International University Bangladesh
2 IT Operation and Communication Department, Bangladesh Bank, Bangladesh
3 Bangladesh University of Engineering and Technology (BUET), Bangladesh
4 Department of Finance, American International University Bangladesh
5 Department of Business Administration, University of Development Alternative
ID 362 A Hydraulic Excavator Augmented Reality Simulator for Operator Training
Joseph Akyeampong, Silvanus J. Udoka and Eui H. Park, Department of Industrial & Systems Engineering, North Carolina A&T State University, Greensboro, North Carolina 27411
Gunduz Ulusoy, Berke Pamay and Kerem Bulbul, Sabanci University, Turkey
Maghsud Solimanpur and Ahad Foroughi, Faculty of Engineering, Urmia University, Urmia, West Azerbaijan Province, Iran
Sultan N. Turhan, Department of Computer Engineering, Çırağan cad. No:36 34357, Ortaköy, İstanbul, Türkiye
Özalp Vayvay, Department of Industrial Engineering, Marmara University Göztepe Campus, 34740, Kadıköy, İstanbul, Türkiye
ID 367 Approximation to Performance Measures in Queuing Systems
Ehsan MoghimiHadji, Department of Industrial Engineering, Istanbul Aydin University, Florya, Istanbul, Turkey
Alagar Rangan, Department of Industrial Engineering, Eastern Mediterranean University, Famagusta, Via Mersin 10, Turkey
ID 369 Effect of Cascade Property on the Performance of Simple Linear Profiles
Masoumeh Eghbali Ghahyazi, Paria Soleimani and Sara Afroozan, Department of Industrial Engineering, Faculty of Industrial Engineering, Islamic Azad University, South Tehran Branch, Tehran 115186-3411, Iran
Seyed Taghi Akhavan Niaki, Department of Industrial Engineering, Sharif University of Technology Tehran 1458889694, Iran
ID 370 A Mathematical Model for Sustainable Supplier Selection in the Apparel Industry
Hatice Ersoy, Erengül Bulut, Tülin Aktin, and Zeynep Gergin, Istanbul Kültür University, Turkey
ID 371 A Bi-Level Programming for Reverse Logistics Network Design
Farzad Dehghanian and Fatemeh Mahdavi, Department of Industrial Engineering, Ferdowsi University of Mashhad, Azadi Sq., Mashhad, Iran
Vahid Edalatpoor, Department of Mathematics, Ferdowsi University of Mashhad, Azadi Sq., Mashhad, Iran
ID 373 Optimization of Multi-Pass Turning Operations Using Genetic Algorithms
Amir Aryanfar and Maghsud Solimanpur, Faculty of Engineering, Urmia University, Urmia, West Azerbaijan Province, Iran
ID 374 A Review on Some Agile Project Management Techniques
Senthilkumar T. and Benruben R, Undergraduate Student, Department of Production Engineering, PSG College of Technology, Coimbatore, Tamil Nadu 641 004, India
Sakthirajan T., Undergraduate Student, Department of Chemical Engineering Sri Venkateswara College of Engineering, Chennai, Tamilnadu 600 025, India
Sivaram N.M., Ph.D. Research Scholar, Department of Production Engineering, PSG College of Technology, Coimbatore, Tamil Nadu 641 004, India
ID 375 Emergency Logistics for Natural Disasters: A Stochastic Programming Approach
Rodrigo A. Garrido, Facultad de Ingeniería y Ciencias, Universidad Adolfo Ibáñez, Santiago, Chile
Patricio Lamas, Catholic University of Chile Santiago, Chile
Iman Niroomand, Onur Kuzgunkaya and Akif A. Bulgak, Department of Mechanical and Industrial Engineering, Concordia University, Montreal, Quebec Canada
ID 379 Fuzzy Multi-Objective Parallel Machines Scheduling Problem through New Solution Method
Mohammad Asghari, Department of Industrial Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
Samaneh Nezhadali, Department of Management, Iran Chamber of Commerce, Industries and Mines, Mashhad, Iran
ID 380 Capacity and Availability Analysis of Power Plants in Kuwait
Mehmet Savsar, Industrial & Management Systems Engineering Department, College of Engineering and Petroleum, Kuwait University, Kuwait
Mohsen Alardhi, Automotive and Marine Engineering Department, College of Technological Studies, PAAET, Kuwait
Abdulla Almazrouee, Manufacturing Engineering Technology Department, College of Technological Studies, PAAET, Kuwait
ID 381 Forecasting NOKIA Sale by Adaptive Neuro Fuzzy Inference Systems (ANFIS)
- Esmaeili, P. Fkhrzad and M. Hasanzadeh, School of Industrial Engineering, Alzahra University, Tehran, Iran
ID 382 A Time Based Approach for Designing Cellular Manufacturing Systems
Adnan M. Mukattash, Naser M. A. Jaber and Nabeel Mandahawi, Department of Industrial Engineering, The Hashemite University, Zarqa, Jordan
ID 384 Minimizing the Sum of Makespan and Maximum Tardiness on Single Machine with Release Dates
- O. Oyetunji, Academic Quality Assurance Unit, University for Development Studies, Ghana
ID 385 Structural Equation Modeling: Software Comparative Review
Shahryar Sorooshian, Business School, Taylor’s University, Malaysia
Alireza Afshari, Department of Industrial Engineering, Islamic Azad University, Shirvan Branch, Shirvan, Iran
Amina Haned, University of Algiers 3 – Dely Brahim, Faculty of Economics and Management, 02, Ahmed Waked Street, Dely Brahim, Algiers, Algeria
Mourad Boudhar, LAID3 Laboratory, Faculty of Mathematics, University USTHB, BP32 Bab-Ezzouar, El-Alia 16111, Algiers, Algeria
ID 387 A Study on Line Balancing in Assembly Line at Automotive Component Manufacturer
- Mohd Hafizuddin, N.K Ahmad Nazif, Y. Mohd Needza and D. Azila Nadiah, Faculty of Technology, University Malaysia Pahang, 26300 Gambang, Kuantan, Pahang, Malaysia
ID 388 Structural Equation Modeling: Sample Size Approach
Shahryar Sorooshian, Business School, Taylor’s University, Malaysia, Meysam salimi, Graduate School of Management, Management and Science University, Malaysia
ID 389 Linear Profile Forecasting using Regression Analysis
Hamideh Razavi and Sanaz Sharifi Ghazvini, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
ID 390 System Dynamics Model for Sustainability Analysis of Mobile Phone Reverse Logistics
Maria G. Gnoni and Alessandra Lanzilotto, Department of Innovation Engineering, University of Salento, Lecce, 73100, Italy
ID 391 Modeling Electric Mobility in Germany: A Policy Analysis Perspective
Fikret Korhan Turan, Akiner Tuzuner and Selcuk Goren, Department of Industrial Engineering, Istanbul Kemerburgaz University, Istanbul 34217, Turkey
Sara Afroozan, Paria Soleimani, and Masoumeh Eghbali Ghahyazi, Department of Industrial Engineering, Faculty of Industrial Engineering, Islamic Azad University, South Tehran Branch, Tehran 115186-3411, Iran
Seyed Taghi Akhavan Niaki, Department of Industrial Engineering, Sharif University of Technology Tehran 1458889694, Iran
ID 393 Westinghouse Method Oriented Fuzzy Rule Based Tempo Rating Approach
Emre Cevikcan, Department of Industrial Engineering, Istanbul Technical University, Besiktas, Istanbul 34367, Turkey
Huseyin Selcuk Kilic, Department of Industrial Engineering Marmara University, Kadikoy, Istanbul 34722, Turkey
Selim Zaim, Faculty of Technology Marmara University, Kadıkoy, Istanbul 34722, Turkey
ID 395 A Model for Multilevel Location-Allocation for Market Capture in Congestion System
Jafar Bagherinejad and Paria Fakhrzad, Department of Industrial Engineering, Alzahra University, Tehran- Iran
Mahdi Bashiri and Hamid Reza Rezaei, Department of Industrial Engineering, Shahed University, Tehran 3319118651, Iran
Behnam Tootooni, Department of Industrial Engineering Amirkabir University of Technology, Tehran 15875-4413, Iran
ID 398 Forecasting Electricity Demand Using Dynamic Artificial Neural Network Model
Mohammad Y. El-Sharkh, University of South Alabama, Mobile, Alabama 36688-002
Mohammad Anwar Rahman, The University of Southern Mississippi, Hattiesburg, MS 39406 USA
Ayşe Hande Erol, Department of Industrial Engineering, Marmara University, Goztepe 34722, Turkey
Merve Er, Department of Industrial Engineering, Faculty of Engineering, Marmara University, Goztepe 34722, Turkey
Serol Bulkan, Department of Industrial Engineering, Faculty of Engineering, Marmara University, Goztepe 34722, Turkey
ID 400 Modeling Capacity Investment under Competition using Game Theory
Ilham Kissani and Youssef El Boukhari, School of Science and Engineering, Al Akhawayn University, Ifrane, 53000, Morocco
ID 401 New Genetic Algorithm for the Travelling Salesman Problem
Ayşe Hande Erol, Department of Industrial Engineering, Marmara University, Goztepe 34722, Turkey
Serol Bulkan, Department of Industrial Engineering, Faculty of Engineering, Marmara University, Goztepe 34722, Turkey
Salah Alden Ghasimi, Rizauddin Ramli, Jaharah Abd Ghani and Nizaroyani Saibani, Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 UKM, Bangi, Selangor, Malaysia
Isa Nakhai Kamalabadi, Department of Industrial Engineering, Faculty of Engineering, Tarbiat Modares University of Tehran, Iran
ID 403 Application of Lean Manufacturing Tools for Performance Analysis: A Case Study
Rubayet Karim, Department of Industrial and Production Engineering, Jessore Science and Technology University, Jessore, Bangladesh
Chowdury M L Rahman, Department of Industrial and Production Engineering Shahjalal University of Science and Technology, Sylhet-3114, Bangladesh
S.M. Sajadifar and M. Hashempour, Department of Industrial Engineering, University of Science and Culture, Tehran, Iran
- Chebouba, Laboratory of Reliability of the Oil Equipments and the Materials, Faculty of Hydrocarbon and Chemistry, University Of Boumerdès, Algeria
- Meglouli, Faculty of Hydrocarbon and Chemistry, University of Boumerdès, Algeria
ID 406 A Review of Scheduling Problems with Earliness Objective
Simin Poursheikh Ali and Mehdi Bijari, Department of Industrial and System Engineering, Isfahan University of Technology, Isfahan, Iran
ID 407 Obstacles Restraining Productivity Improvement Programs in a Developing Country
Amur M.A. Al Riyami, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman
Hamdi A. Bashir, Department of Industrial Engineering and Management University of Sharjah, Sharjah, UAE
Khalid Alzebdeh, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman
İlhan Or and K.Büşra Yilmazer, Department of Industrial Engineering, Boğaziçi University, Bebek 34342, Istanbul, Turkey
Yogender Singh, Kuldeep Chaudhary and P.C. Jha, Department of Operational Research, University of Delhi, Delhi-110007, India
ID 415 Online Financial Services Customers: Are They Loyal?
Riadh Ladhari, Faculty of Business Administration, Laval University, Quebec, Canada
André Leclerc, Caisses populaires acadiennes’ Chair in Co-operative Management, University of Moncton, Moncton, Canada
Aftab Alam and Mairaj Salim, King Abdulaziz University, Saudi Arabia
ID 418 A Size-Bed Wheelchair Design with Scaled Prototype
Khalid Bin Hasnan and Luhur Budi Saesar, Faculty of Mechanical and Manufacturing Engineering, University Tun Hussein onn Malaysia, Parit Raja, 86400 Batu Pahat, Johor, Malaysia
Mojahid Saeed Osman, Department of Systems Engineering, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia
Bala Ram, Department of Industrial & Systems Engineering North Carolina A&T State University, Greensboro, NC 27411, United States
Kanika Gandhi and P. C. Jha, Department of Operational Research, Faculty of Mathematical Sciences, University of Delhi, Delhi-110007, India
ID 425 Developing an Index System for Supply Chain Value Measurement: Adopting a Holistic View
Seyed Mohamad Seyed Hosseini, Seyed Ftatemeh Golriz Gashti and Mohamad Mohsen Sedighi, Department of Industrial Engineering, Islamic Azad University, Science and Research Branch, Tehran, Iran
ID 426 Transportation Mode Selection under Carbon Emissions Considerations
Gokce Palak, Department of Industrial and Systems Engineering, Mississippi State University, Mississippi State, MS 39762, USA
Sandra D. Eksioglu, Department of Industrial and Systems Engineering, Mississippi State University, Mississippi State, MS 39762, USA
Morteza Giahi1, 2, Hamid Bazargan2, 1Young Researchers Society, 2Department of Industrial Engineering, Shahid Bahonar University of Kerman, Kerman, Iran
Masoud Rashidinejad, Department of Electrical Engineering, Shahid Bahonar University of Kerman, Kerman, Iran
Junior M. Mabiza and Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa
Michael Mutingi, Department of Mechanical Engineering, University of Botswana, Gaborone, Botswana
Benmounah Amar, Laboratory of Reliability of Hydrocarbons Equipment, FHC, University UMBB Boumerdes 35000, Algeria
Hachemi Tayeb, Department of Transport and Equipment, University UMBB Boumerdes 35000, Algeria
ID 432 Acoustic Monitoring of Machine Tool Health Using Transmitted Sound
Valerie G. Cook, Department of Engineering, Penn State Erie, the Behrend College, Erie, Pennsylvania 16563-1701, USA
Hanen Bouabid and Karem Dhouib, Mechanical Engineering and Productique Department, MSSDT Laboratory, École Supérieure des Sciences et Techniques de Tunis, Montfleury, 1000 Tunis, Tunisia
Ali Gharbi, Automated Production Engineering Department, C2SP Laboratory École de Technologies Supérieures, Montréal, Québec H3C-1K3, Canada
ID 434 Aggregate Planning: Opportunities and Challenges between Developed and Developing Countries
Ilham Kissani and Asmae El Mokrini, School of Science and Engineering, Al Akhawayn University, Ifrane, Morocco
Karem Dhouib, Mechanical Engineering and Productique Department, MSSDT Laboratory, École Supérieure des Sciences et Techniques de Tunis, Montfleury, 1000 Tunis, Tunisia
Ali Gharbi, Automated Production Engineering Department, C2SP Laboratory École de Technologies Supérieures, Montréal, Québec H3C-1K3, Canada
Houda Abdelwahed, Mechanical Engineering and Productique Department, MSSDT Laboratory, École Supérieure des Sciences et Techniques de Tunis, Montfleury, 1000 Tunis, Tunisia
Emre Tuncel, Abe Zeid and Sagar Kamarthi, Department of Mechanical and Industrial Engineering, Northeastern University, Boston, Massachusetts 02115, USA
Selen Onel, Abe Zeid and Sagar Kamarthi, Department of Mechanical and Industrial Engineering, Northeastern University, Boston, MA 02115, USA
ID 438 Characterization of Healthcare Mass Customization
Ilke Boyaci, Abe Zeid and Sagar V. Kamarthi, Department of Mechanical and Industrial Engineering, Northeastern University, Boston, Massachusetts 02115, USA
ID 439 A Bayesian Model to Enhance Domestic Energy Consumption Forecast
Mohammad Anwar Rahman, University of Southern Mississippi, Hattiesburg, MS 39406, USA
Mohammad Y. El-Sharkh, University of South Alabama, Mobile, Alabama 36688-002, USA
Asheka Rahman, University of Southern Mississippi, Hattiesburg, MS 39406, USA
ID 440 Modular Products and Proprietary Interface
Farooq Sheikh, State University of New York (SUNY), Geneseo, USA
ID 443 Collaborative Supply Chain Practices and Prospect of Companies in Bangladesh
Md. Abdul Quddus, A.M.M. Nazmul Ahsan and Azizur Rahman, Department of Industrial Engineering and Management, Khulna University of Engineering and Technology, Khulna-9203, Bangladesh
ID 444 Adaptive Injection Molding Quality Prediction Framework Using Sensor Data
Yong-Han Lee, Department of Industrial and Systems Engineering, Dongguk University-Seoul, Seoul 100-715, Korea
Hyeonnam Kim, GM Korea Company, 199-1 Cheongcheon-dong, Incheon, Korea
Jongtae Rhee, Department of Industrial and Systems Engineering, Dongguk University-Seoul, Seoul 100-715, Korea
A.M.M. Nazmul Ahsan, Md. Abdul Quddus and Nazma Sultana, Department of Industrial Engineering and Management, Khulna University of Engineering and Technology, Khulna-9203, Bangladesh
Amir Ahmadi-Javid and Pedram Hooshangi-Tabrizi, Department of Industrial Engineering, Amirkabir University of Technology, Tehran, Iran
ID 448 Incorporating Price Decisions in a Profitable Multiple-Tour Problem
Amir Ahmadi Javid and Elahe Amiri, Department of Industrial Engineering, Amirkabir University of Technology, Tehran, Iran
ID 450 Solving Transportation Problem with Mixed Constraints
Radindra Nath Mondal and Md. Rezwan Hossain, Mathematics Discipline, Science, Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh
ID 453 Mine Waste Rock Management Using Mixed Integer Programming (MIP)
Erkan Topal and Yu Li, Department of Mining Engineering, Western Australia School of Mines, Curtin University, Kalgoorlie, Western Australia, 6430, Australia
David JWilliams Golder Geomechanics Centre, The University of Queensland, Brisbane, Queensland, 4072, Australia
ID 455 Developing an E-business Management System based on Success Factors Interrelationship
Shahryar Sorooshian, Business School, Taylor’s University, Malaysia
Meysam Salimi, Graduate School of Management, Management and Science University, Malaysia
ID 457 Weight Variation Reduction for Baby Lido Products through Six Sigma Methodology and Tools
Nabeel Mandahawi, Adnan M. Mukattash and Suleiman Obeidat, Department of Industrial Engineering, The Hashemite University, Zarqa, Jordan
ID 458 Optimization over Efficient Stochastic Solutions
- Mebrek and D. Chaabane, USTHB University B.P.32, Bab-Ezzouar, El-Alia 16111, Algiers, Algeria
ID 459 Three-Dimensional Numerical Analysis of the Harmfulness of the Defects in Oil Pipes
Medjadji Bachir, University of Mascara Algeria, rue remil belhadj cite medber, Mascara, Algeria
ID 463 The Evidential Reasoning Approach for Suppliers Prioritization with Group-AHP Weights
- Massahi.K, Department of Industrial Engineering, Tarbiat Moallem University, Tehran, Iran
- Mirzazadeh, Department of Industrial Engineering, Tarbiat Moallem University, Tehran, Iran
- Mirzadeh.P, Department of Industrial Engineering, Amirkabir University of Technology, Tehran, Iran
ID 464 A New Approach to Solve an Extended Portfolio Selection Problem
Mohammad Hossein Babaei, Mohammadreza Hamidi, Ehsan Jahani and Hossein Pasha Abgarmi, Industrial Engineering Department, Iran University of Science and Technology, Tehran, Iran
- Abderrezak, Faculté des Sciences de l’ingénieur, University Badji Mokhtar, Annaba, Algeria
- Mizane, Faculté des Sciences, University Badji Mokhtar, Annaba, Algeria
ID 467 Project Price Modeling by Optimal Fixed Price Incentive Contract
Kamrul Ahsan, School of Management and Information Systems, Victoria University, Melbourne, Australia
Hiroaki Matsukawa, Department of Administrative Engineering, Keio University, Japan
ID 471 Multi-Component Preventive Maintenance Optimization based on Availability
Mohammad Doostparast, Iranian Oil pipeline and Telecommunication Company-North District
Nasir Saidi Rashboogari, Department of Industrial Engineering, Payame Noor University, Kermanshah, Iran
Siamak Noori, Iran University of Science of Technology, Iran
Dariush Moradinezhad, Department of Industrial and Manufacturing Engineering, Western Michigan University, USA
Mohammad Hossein Babaei, Ehsan Jahani and Mohammadreza Hamidi, Iran University of Science of Technology, Iran
ID 474 A Viral Systems Algorithm for the Traveling Salesman Problem
Dedy Suryadi, and Yoana Valois Maryska Kandi, Department of Industrial Engineering, Parahyangan Catholic University, Bandung 40141, Indonesia
ID 476 Tree-based Data Aggregation Algorithms in Wireless Sensor Networks: A Survey
Mohammad Abdus Salam, Department of Computer Science, Southern University and A&M College, Baton Rouge, Louisiana 70813, USA
Tanjima Ferdous, Department of Computer Science, Southern University and A&M College, Baton Rouge, Louisiana 70813, USA
ID 477 Impact of Abrasive Wear on Drilling Tools
- Dalia, Faculté. Sciences de l’ingénieur, Département électromécanique, Université Badji-Mokhtar Annaba, Annaba, 23000 Algeria
ID 479 Relationship between Standing Height and Popliteal Height
Salami O. Ismaila, Department of Mechanical Engineering, Federal University of Agriculture, P.M.B 2440, Abeokuta, Ogun State, Nigeria
Olusegun G. Akanbi, Department of Industrial Engineering University of Ibadan, Ibadan, Oyo State, Nigeria
Kolawole T. Oriolowo, Department of Mechanical Engineering, The Polytechnic, Ibadan, Oyo State, Nigeria
Jaharah A. Ghani, Haris Jamaluddin, Rizauddin Ramli, Mohd Nizam Ab Rahman, Baba Md Deros and Che Hassan Che Haron, Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Malaysia
ID 483 Cardiovascular Strain of Bricklayers in Southwestern Nigeria
Olasunkanmi S. Ismaila, Department of Mechanical Engineering, Federal University of Agriculture, P. M. B 2440, Abeokuta, Ogun State, Nigeria
Kolawole T. Oriolowo, Department of Mechanical Engineering, The Polytechnic, Ibadan, Oyo State, Nigeria
Olusegun G. Akanbi, Department of Industrial Engineering University of Ibadan, Ibadan, Oyo State, Nigeria
ID 484 Car Recalls: A Problem Unique to Toyota or For All Car Makers?
Kamrul Ahsan, School of Management and Information Systems, Faculty of Business and Law, Victoria University, Australia
Mostafa F. Fawzy, Faculté of Engineering, King Abdulaziz Université, Jeddah, Saudi Arabia
- Hassanzadeh and I. Mahdavi, Department of Industrial Engineering, Mazandaran University of Science and Technology, Babol, Iran
- Mahdavi-Amiri, Faculty of Mathematical Sciences, Sharif University of Technology, Tehran, Iran
- Tajdin, Department of Industrial Engineering, Mazandaran University of Science and Technology, Babol, Iran
ID 487 A Web-Based Multi-Optimization Approach for Convergent Product Networks using Steiner Tree
Reza Hassanzadeh, Iraj Mahdavi and Hamed Fazlollahtabar, Department of Industrial Engineering, Mazandaran University of Science and Technology, Babol, Iran
Nezam Mahdavi-Amiri, Faculty of Mathematical Sciences, Sharif University of Technology, Tehran, Iran
ID 488 Mathematical Optimization for Service Marketing via Multi-Criteria Acceptability Analysis
Hamed Fazlollahtabar, Faculty of Industrial Engineering, Iran University of Science and Technology, Tehran, Iran
Ermia Aghasi, Department of Executive Management, Faculty of Human Sciences, University of Guilan, Rasht, Iran
ID 490 Helical Coil Springs Life Quality Assessment
Fulufhelo Masithulela, Department of Mechanical and Industrial Engineering, University of South Africa, Florida, South Africa
ID 491 TranLogic Dynamic Testing Facility Delivery Problems: A Case Study
Fulufhelo Masithulela, Department of Mechanical and Industrial Engineering, University of South Africa, Florida, South Africa
Gulnara Abitova, Department of System Analyses and Management, L. N. Gumilev Eurasian National, University, Astana, Kazakhstan
Vladimir Nikulin, Department of Electrical and Computer Engineering, Binghamton University, Binghamton, NY, USA
Mamirbek Beisenbi, Department of System Analyses and Management, L. N. Gumilev Eurasian National, University, Astana, Kazakhstan
ID 498 Challenges of Lean Manufacturing Implementation: A Hierarchical Model
Albert Chong Hooi Cheah, Wai Peng Wong and Qiang Deng, School of Management, Universiti Sains Malaysia, 11800 Penang, Malaysia
ID 503 Quality Circle: An Approach to Solve Institutional Problems: A Case Study
Mohan P. Khond, Mechanical Engineering Department, College of Engineering Pune,India, 411005
Swapnil C. Devatwal and Hanumant J. Gorade, College of Engineering Pune, Maharashtra, India, 411005
- Kantor, A. Elkamel, and M. Fowler
Department of Chemical Engineering
University of Waterloo
200 University Avenue West
Waterloo, ON, N2L 3G1, Canada
ID 505 Optimal Product Design of Wheat Straw Polypropylene Composites
Ali Elkamel, Rois Fatoni and Leonardo Simon, Department of Chemical Engineering, University of Waterloo, Ontario, Canada N2L 3G1
Hedia Fgaier, Department of Applied Mathematics and Statistics, University of Guelph, Ontario, Canada, N1G 2W1
Lena Ahmadi, Ali Elkamel, Eric Croiset and Peter L. Douglas, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
Evgueniy Entchev, CANMET Energy Technology Centre Natural Resource Canada Ottawa, Ontario Canada
ID 507 Computer-aided Process Simulation Modules in ChE Education
Ali Almansooria, Salah Abu Yahyaa, and Ali Elkamela,b
aDepartment of Chemical Engineering, The Petroleum Institute, Abu Dhabi
bDepartment of Chemical Engineering, University of Waterloo
ID 508 Solving No-wait Flow shop by Heuristic Algorithm
- M. Komaki, Department of Mechanical, Industrial and Manufacturing Engineering, University of Toledo, 2801 West Bancroft Street, Toledo, OH 43606, USA
Vahid Kayvanfar, Research Institute of Food Science and Technology, Mashhad 91735-139, Iran
Salah Bouhouche, Zoheir Mentouri, Hazzem Meradi and Laib dit Leksir Yazid, Centre National de Recherche en Soudage et Controle – CSC, Unité de Recherche Appliquée en Sidérurgie et Métallurgie, URASM – CSC, BP 196 Annaba, 23000, Algeria
ID 510 Introduction of Lean Six Sigma principles into Plant Maintenance Work Order Cycle Time
Abdulla Y. Dhafer Saudi Aramco P.O.Box 50, Riyadh 11383 Riyadh, Saudi Arabia
ID 512 Cooling Bed of Rebar Process Evaluation using Temperature Monitoring and Soft Sensing Methods
Ziani Slimane, Mentouri Zoheir and Bouhouche Salah, Centre National de Recherche en Soudage et Controle – CSC, Unité de Recherche Appliquée en Sidérurgie et Métallurgie, URASM – CSC, BP 196 Annaba, 23000, Algeria
Bast Jurgen, HGUM, Institut für Maschinenbau, TU Bergakademie Freiberg, Cotta Strasse 4, D-9596, Germany
ID 515 Economic Lot Scheduling Problem Considering Deteriorating Items
Vahid Kayvanfar, Research Institute of Food Science and Technology, Mashhad 91735-139, Iran
Mostafa Zandieh, Department of Industrial Management, Management and Accounting Faculty, Shahid Beheshti University, G.C., Tehran, Iran
ID 518 Design Evaluation of Mechanical Brakes at System Conceptual Design Stage: A MADM Approach
Ankush Anand, School of Mechanical Engineering, SMVD University, Katra, Jammu and Kashmir, India
Mohd. Farooq Wani, Department of Mechanical Engineering, National Institute of Technology, Hazratbal, Srinagar, Kashmir, India
ID 519 Analysis of Hydrogen Economy for Hydrogen Fuel Cell Vehicles in Ontario
Ali Almansoori, Department of Chemical Engineering, The Petroleum Institute, P.O. Box 2533, Abu Dhabi, UAE
Hui Liu, Ali Elkamel and Michael Fowler, Chemical Engineering Department, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
- Saifa, A. Almansooria, and A. Elkamela,b
aDepartment of Chemical Engineering, The Petroleum Institute, Abu Dhabi, UAE
bDepartment of Chemical Engineering University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
Masoud Pourhamidi Quality Management Research Group, University of Isfahan, Isfahan, Iran
ID 525 Developing a Safety Index using FMEA
Mohammad Abdolshah, Industrial Engineering Department, Islamic Azad University, Semnan Branch, Iran
ID 529 A Simulation Study of Lot Flow Control in Wafer Fabrication Facilities
Ingy A. El-Khouly, Khaled S. El-Kilany, Department of Industrial and Management Engineering, Arab Academy for Science, Technology and Maritime Transport, Alexandria, Egypt
Paul Young, School of Mechanical and Manufacturing Engineering Dublin City University, Glasnevin, Dublin 9, Ireland
ID 530 Supply Chain Network Design Considering Customer Service Level
Bilal Sisman, Administrative Science Department, University of Afyon Kocatepe, Afyonkarahisar, Turkey
- B. Kazemzadeh and F. Firouzi Jahantigh, Department of Industrial Engineering, Faculty of Engineering, Tarbiat Modares University, Tehran, Iran
ID 533 Project Management Using Cost Significant Items and Neural Network
Bouabaz Mohamed and Belachia Mouloud, The University of 20 august 1955-Skikda, LMGHU Laboratory
Mordjaoui Mourad, The University of 20 august 1955-Skikda, LRPCSI Laboratory
ID 534 Assessing the Priority Rules of Scheduling Application in Job Shop Manufacturing Company
- Azila-Nadiah, N.K. Ahmad Nazif and M. Mohd Hafizuddin, Faculty of Technology, University Malaysia Pahang, 28300 Gambang, Pahang, Malaysia
ID 535 The Effect of Electric Current on the Human Body
Abdallah Ouazani, Idir Habi and Khellassi Abdelmadjid, Université M’hamed Bougara de Boumerdes – UMBB, Algeria
ID 536 A Restorative Safety Model for Micro and Small Enterprises
Mohammad Miftaur Rahman Khan Khadem, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman
Md. Anisul Islam, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman
ID 538 Applying Stochastic Goal Programming to Solve APP Problem: A Case Study
Mouna Mezghani and Taicir Loukil, Logistique, Gestion Industrielle et de la Qualité, Institut Supérieur de Gestion Industrielle de Sfax, Université de Sfax, Tunisie.
Belaid Aouni, Decision Aid Research Group, School of Commerce and Administration, Laurentian University, Sudbury, Ontario, Canada
S.E. Sadique, School of Mechanical Engineering, Sheridan College, 7899 McLaughlin Road, Brampton, ON, L6Y 5H9, Canada
Ahad Ali, A. Leon Linton Dept. of Mechanical Engineering, Lawrence Technological University, 21000 West Ten Mile Road, Michigan 48075, USA
- Wang, Department of Advanced Manufacturing and Automation Technology, Centennial College, 941 Progress Avenue, Toronto, ON, M1G3T8 Canada
ID 540 Problems of the Losses of Circulation on the Surface Study of a Case Hassi –Messaoud Algeria
Abdelhak Bentriou, Faculty of Hydrocarbons and Chemistry, University of Boumerdes, Algeria
ID 541 Preventive Maintenance Time – Optimal Preventive Maintenance
Abdulnasir Werfalli, Technology College of Mechanical Engineering, Benghazi – Libya
ID 542 RFID- Enabled Dynamic Value Stream Mapping
Muawia Ramadan, Israa Al Karmi and Bernd Noche, Transport Systems and Logistics Engineering Institute, Mechanical Engineering Department, Duisburg-Essen University, Duisburg 47058, Germany
ID 543 Preventive Maintenance Scheduling
Abdulnasir A. Elwerfalli, Technology College of Mechanical Engineering, Benghazi – Libya
- M. M. Mukaddes and N. F. Ahmed Choudhury, Shahjalal University of Science and Technology, Sylhet, Bangladesh
Mohammad Khadem, Sultan Qaboos University, Muscat, Oman
Ahad Ali, Lawrence Technological University, Southfield, Michigan, USA
ID 545 Mathematical Modeling of Listeria Overgrowth Phenomena
Hedia Fgaier and Herman Eberl, Department of Mathematics and Statistics, University of Guelph, Canada
ID 546 Optimization of the EDM Parameters on the Surface Roughness of AISI D3 Tool Steel
Othman Belgassim and Abdurrahman Abusada, Mechanical and Industrial Engineering Department, Tripoli University, Tripoli, Libya
ID 547 Pull-out Response of a Steel Post Inserted in Bovine Bone: Fixation of Knee Prosthesis
Khaled Gammoudi, Ecole Nationale d’Ingénieurs de Sfax, LASEM, University of Sfax, Tunisia, Institut Supérieur des Études Technologiques de Gafsa, University of Gafsa, Tunisia
Maher Dammak, Ecole Nationale d’Ingénieurs de Sfax, LASEM, University of Sfax, Tunisia, Institut Préparatoire aux Études d’Ingénieurs de Sfax, University of Sfax, Tunisia
Mohamed Kharrat, Ecole Nationale d’Ingénieurs de Sfax, LASEM, University of Sfax, Tunisia, Faculté des Sciences de Gafsa, University of Gafsa, Tunisia
ID 549 Standard Operation Process Applied on Lebanese Dairy SMEs
Maryse F. Chemali, Department of Industrial and Mechanical Engineering, Lebanese American University, Blat, Jbeil, Lebanon
Ramy F. Harik, Department of Industrial and Mechanical Engineering, Lebanese American University, Blat, Jbeil, Lebanon
ID 550 Assessment of Reliability of Hamilton-Tompkins Algorithm to ECG Parameter Detection
Saeka Rahman, Dhaka University, Bangladesh
Mohammad Anwar Rahman, University of Southern Mississippi, Hattiesburg, MS, USA
ID 551 Developing 6D BIM Energy Informatics for GDL LEED IFC Model Elements
Shawn E. O’Keeffe, Department of Science and Technology, School of Computing & School of Construction, University of Southern Mississippi, Hattiesburg, Mississippi 39406-0001, USA
ID 554 Obstacles Restraining Productivity Improvement Programs in a Developing Country
Hamdi A. Bashir, Department of Industrial Engineering and Management University of Sharjah, Sharjah, UAE
Khalid Alzebdeh and Amur M.A. Al Riyami, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman
Farag Elfeituri and Abdulmonem Hammouda, Department of Industrial & Manufacturing Systems Engineering, University of Garyounis, Benghazi, Libya
Ahmet Yücekaya, Department of Industrial Engineering, Kadir Has University, Cibali 34083, Istanbul, Turkey
Silvia Pellegrini, Devdas Shetty and Louis Manzione, College of Engineering, Technology, and Architecture, University of Hartford, West Hartford, Connecticut 06117, USA
ID 558 A Sequence Pattern Matching Approach to Shopping Path Clustering
In-Chul Jung and Young S. Kwon, Department of Industrial and Systems Engineering, Dongguk University, South Korea
Yung-Seop Lee, Department of Statistics, Dongguk University, South Korea
ID 559 How Ready are Organizations to Adopt with Information Technology?
Mahda Garmaki, Department of Information Technology Management, Faculty of Management & Economics, Islamic Azad University, Science & Research Branch, Tehran, Iran
Nazanin Pilevari, Department of Industrial Management, Faculty of Management & Economics, Islamic Azad University, Science & Research Branch, Tehran, Iran
Jeff Hoi Yan Yeung and Wen, He, Department of Decision Sciences and Managerial Economics, Faculty of Business Administration, The Chinese University of Hong Kong, Shatin, N.T., Hong Kong
ID 561 A Survey on the E-Government Business Model Regarding Value Creation Approach
Ahmad Sarani, Department of Management, Islamic Azad University, Aliabad Katoul, Iran
Mehdi Tehranipoor, Department of Computer, Islamic Azad University, Aliabad Katoul, Iran, Zahra Nejadakbari
ID 562 Major Difficulties Faced to Ensure Security in Food-Processing Field
Fedali Yamina, Health and Industrial Security Institute, Batna, Algeria
Djalel DIB, Bendakir A. Hakim and Metatla Sami, Department of Electrical Engineering, Laboratory of Electrical Engineering LABGET, University of Tebessa, Algeria
ID 565 Outsourcing and Its Impact on Operational Performance
Ali Nazeri, Department of Industrial Engineering, Islamic Azad University, Damavand Branch, Damavand
Reza Gholami, Department of Mobile Center Telecommunication Company, Ilam, Iran
Sadra Rashidi, Department of Industrial Engineering, Islamic Azad University, Ilam Branch, Ilam, Iran
ID 566 Simulation of Dysfunction of a Complex Industrial Process
Nouara Ouazraoui, Mouloud Bourareche, Rachid Nait-Said and Hafad Touahar, Laboratory of Research in Industrial Prevention (LRIP), Health and Occupational Safety Institute, Safety Department, University of Batna, Batna, Algeria
ID 567 Fuzzy Optimal Models for Gas Reservoir Management: Case of Sarajeh Gas Field (SGF)
Nooshin Jabbari and Mohd Hamdi, University of Malaya, Malaysia, Amir Naser Akhavan,
AmirKabir University of Technology, Iran
ID 568 Simulation of Dysfunction of a Complex Industrial Process
Nouara Ouazraoui, Mouloud Bourareche, Rachid Nait-Said and Hafad Touahar, Laboratory of Research in Industrial Prevention (LRIP), Health and Occupational Safety Institute, Safety Department, University of Batna, Batna 05000, Algeria
ID 569 Problems of the Losses of Circulation on the Ground Surface Case
Abdelhak Bentriou, Université de Boumerdes, Boumerdes, Algeria
ID 570 Architecture as an Organism
M.R. Bemanian, M. Ansari and M. Yeganeh, Department of Architecture, Faculty of Art, Tarbiat Modares University, Iran
ID 571 Selecting the Optimum Cost Management Method by FAHP and DOA Technique
Farnoosh Saleh, Public Administration, Islamic Azad University, Naragh Branch, Iran
Farhad Karimi, Business Administration, Science and Research Branch, Islamic Azad University, Arak, Iran
Habibollah Javanmard, Department of Management, Islamic Azad University, Arak Branch, Iran
ID 572 Determining and Ranking Strategic Actions to Improve Logistics Service using the Fuzzy QFD
Habibollah Javanmard, Department of Management Islamic Azad University, Arak Branch, Iran
Masoud Najmi, Business Administration, Science and Research Branch, Islamic Azad University,Arak, Iran
Farnoosh Saleh, Public Administration, Islamic Azad University, Naragh Branch, Iran
ID 573 Conceptual Model of Logistics City
Kamran Yeganegi, Department of Industrial Engineering, Islamic Azad University, Zanjan Branch, Zanjan, Iran
Elham Eivazi, Department of Industrial Engineering, Islamic Azad University, Zanjan Branch, Zanjan, Iran
ID 574 Vendor Managed Inventory Application in Oil and Gas Industry
Ayesha Binlootah and Balan Sundarakani, Faculty of Business and Management, University of Wollongong in Dubai, Dubai 20187, UAE
Hussain Bux Marri and Ghulam Yasin Shaikh, Department of Industrial Engineering and Management, Mehran University of Engineering and Technology, Jamshoro -76062- Sindh, Pakistan
ID 576 Audit Business Process Improvement Using a Combination of Value Engineering and Data Mining
Farhad Ebrahimian, Islamic Azad University, Iran
ID 577 Manufacturing and Design Technology: Ford Approach
Teslime Arikan, Ford Otosan Kocaeli Plant, Kocaeli, Tureky
ID 578 Product Traceability Information: An Approach for Information Linking
Matteo M. Savino, Antonio Mazza, Department of Engineering, University of Sannio, Piazza Roma, 21 – 82100 Benevento, Italy
ID 579 Operations Management Research: A 10-year Survey
Alireza Sheikhzadeh, Department of Industrial Engineering, Hatef Institute of Higher Education, Zahedan, Iran
Hamed Heidari, Department of Industrial Engineering Amirkabir University of Technology, Tehran, Iran
ID 580 Revitalising the Manufacturing Industries through CIM
- M. Bhosle, A. H. Kolekar and P. D. Darade, Department of Mechanical Engineering, Vidya Pratishthan’s College of Engineering, Baramati, Pune, India
ID 584 Case Study: Improving Production Planning in Steel Industry in Light of Lean Principles
Sameh Mohamed Fahmi and TamerMohamed Abdelwahab, Al Ezz Dekheila Steel Co. (EZDK), Alexandria, Al Dekheila, Alexandria, Egypt
ID 585 Mathematical Analysis of Electrical Discharge Machining on FW4 Weld Metal
- R. Shabgard, R. M. Shotorbani and S. H. Alenabi, Department of Mechanical Engineering, University of Tabriz, Iran
Adnan Al-Bashir, Department of Mechanical and Industrial Engineering, ALHOSN University, UAE, The Hashemite University, Jordan
Akram Al-Tawarah, Department of Biomedical Engineering Royal Science Society, Jordan
ID 588 Entrenching Strategic Competitive Advantage through Transformational Leadership!
- Asiya, Z. Kazmi and Josu Takala Department of Production-Industrial Management University of Vaasa FI-65101 Vaasa, Finland
- Asiya and Z. Kazmi Department of Production-Industrial Management University of Vaasa FI-65101 Vaasa, Finland
ID 590 The Effect of IT on Organizational Agility
Kamran Yeganegi, Industrial Engineering Department, Islamic Azad University, Zanjan Branch
Zanjan, Iran, Mohammad Saber Zahiri Azar, Department of Industrial Engineering, Payame Noor University, Zanjan Branch, Zanjan, Iran
ID 591 Design of Project Management Information Systems
Kamran Yeganegi, Industrial Engineering Department, Islamic Azad University, Zanjan Branch, Iran
Sarah Safaeian, Department of Industrial engineering, Payame Noor University, Zanjan Branch, Iran
S Asiya and Z. Kazmi Department of Production-Industrial Management University of Vaasa FI-65101 Vaasa, Finland
Mohammadreza Shabgard,Rasol Abaspour and Mirsadegh Seyedzavvar, Department of Mechanical Engineering, University of Tabriz, Tabriz, Iran
ID 594 Design for Six Sigma (DFSS) as a Proactive Business Process
Daw Alwerfalli and Trevor Lash, A. Leon Linton Department of Mechanical Engineering College of Engineering, Lawrence Technological University, Southfield, Michigan 48075, USA