Proceedings of the International Conference on Industrial Engineering and Operations Management Publisher: IEOM Society International Publication Year: 2026
ISSN: 2169-8767 (U.S. Library of Congress) ISBN: 979-8-9958771-1-0
ID 2 AI-Driven Regulatory Frameworks for Intelligent Mineral Resource Management: A Research Agenda
Oludolapo A Olanrewaju, Institute of System Science, Durban University of Technology, Durban, South Africa
Felix Mora-Camino, Institute of System Science, Durban University of Technology, Durban, South Africa Department of Industrial Engineering, Durban University of Technology, Durban, South Africa
Oladeji O Ige, Department of Materials Science and Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria Institute of System Science, Durban University of Technology, Durban, South AfricaDepartment of Industrial Engineering, Durban University of Technology, Durban, South Africa
Mbidzo Ladzani and Gbeminiyi John Oyewole, School of Mechanical, Industrial, and Aeronautical Engineering, University of the Witwatersrand, Johannesburg, South Africa
Lasisi E Umoru, Department of Materials Science and Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria
Oludolapo A Olanrewaju, Institute of System Science, Durban University of Technology, Durban, South Africa
Oladeji O Ige, Department of Materials Science and Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria Institute of System Science, Durban University of Technology, Durban, South Africa, Department of Industrial Engineering, Durban University of Technology, Durban, South Africa
Mario Alejandro Chirinos-Galvez, Carlos Antonio Jara-Valencia, Jorge Antonio Corzo-Chavez and Gino Viacava-Campos, Carrera de Ingeniería Industrial, Universidad de Lima, Lima, Perú
Naomi Abigail Del Castillo-Tapia, Angie Lizbeth Casablanca-Dominguez, Gino Viacava-Campos and Jorge Antonio Corzo-Chavez, Carrera de Ingeniería Industrial, Universidad de Lima, Lima, Peru
ID 11 Improving On-Time Delivery in a Metalworking Company through: 5S, SMED and Jidoka
Emmanuel Paredes-Aymara, Sthefany Amanqui-Quinto, Gino Viacava-Campos and Jorge Antonio Corzo-Chavez, Carrera de Ingeniería Industrial, Universidad de Lima, Lima, Perú
Jhon Hayro Condor-Ponce, Sebastián Matías Gutiérrez-Rabanal, Marcos Fernando Ruiz-Ruiz and Juan Carlos Quiroz-Flores, Carrera de Ingeniería Industrial, Universidad de Lima, Lima, Perú
Debapriyo Nag, MANCOSA Durban, South Africa
Willem Wouter de Vos and Michelle Smit, Department of Industrial Engineering, Stellenbosch University, South Africa
Tyron Rubin Jansen and Michelle Smit, Department of Industrial Engineering, Stellenbosch University, South Africa
Aliyu Mustapha Olanrewaju, Department of Industrial and Organisational Psychology, College of Economics and Management Sciences, University of South Africa, South Africa
Maphala Betty Portia, Department of Industrial and Organisational Psychology, College of Economics and Management Sciences, University of South Africa, South Africa
Kemlall Ramsaroop Ramdass, Azeez T. Mafutau and L.S Ngubane, Industrial and Engineering Management, Faculty of Engineering and the Built Environment, University of South Africa, Roodepoort, South Africa
Ayodeji Olatunji Aiyetan, Nathaniel Ayinde Olatunde and Ntokozo Snothile Nkosi, Construction Management and Quantity Surveying Department, Durban University of Technology, South Africa
Ayodeji Olatunji Aiyetan, Nathaniel Ayinde Olatunde, Nolwazi Philile Mhlongo and Mxolisi Perseverance Khumalo, Construction Management and Quantity Surveying Department, Durban University of Technology, South Africa
Xhanti Dyonase, Operations and Quality Management, Durban University of Technology, South Africa
ID 34 An Overview: Applying Blockchain Technology to Improve Traceability in Manufacturing
Gcina Nzima and Jan-Harm Pretorius, Postgraduate School of Engineering Management, University of Johannesburg, Johannesburg, South Africa
Louwrence Erasmus, Command, Control and Integrated Systems, Defense and Security Cluster, Council for Scientific and Industrial Research Pretoria, South Africa
Tshepho Kobe and Khaled Aboalez, Postgraduate School of Engineering Management, Faculty of Engineering and the Built Environment University of Johannesburg, Johannesburg, South Africa
Thapelo Thakhudi and Khaled Aboalez, Postgraduate School of Engineering Management, Faculty of Engineering and the Built Environment University of Johannesburg, Johannesburg, South Africa
Fisokuhle Ndlangamandla and Khaled Aboalez, Postgraduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa
Mendon Dewa, Department of Industrial Engineering, Faculty of Engineering and the Built Environment, Durban University of Technology Durban, South Africa
Lucrecia Valentine, Department of Industrial and Systems Engineering, Faculty of Engineering and the Built Environment, Cape Peninsula University of Technology, 7535 Cape Town, South Africa
Bingwen Yan, Department of Operations Management, Faculty of Business and Management Sciences, Cape Peninsula University of Technology, 7535 Cape Town, South Africa
Samantha Phologane, Department of Industrial and Systems Engineering, Faculty of Engineering and the Built Environment, Cape Peninsula, University of Technology, 7535 Cape Town, South Africa
ID 44 Leadership-Driven Operations Management for Sustainable Mining: A Review
Caleb Wisdom Mulaudzi and Hilda Kundai Chikwanda, Graduate School of Technology Management, Faculty of Engineering and the Built Environment, University of Pretoria, Pretoria, South Africa
Cruz Andrei Joseph D., Dela Rosa, Wendel C., Genabe Kurt Brian P. and Zipagan Princess Jasmin A., 4th Year Faculty of Engineering Students Department of Industrial Engineering, University of Santo Tomas (UST), Manila, Philippines
Carlos Ignacio P. Lugay Jr., PhD, PIE, ASEAN ENGR., UST Faculty of Engineering Faculty Member, Department of Industrial Engineering, University of Santo Tomas (UST), Manila, Philippines
Oludolapo Akanni Olanrewaju and Akeem Olarewaju Yunus, Institute of Systems Science (ISS), Durban University of Technology, Durban, South Africa
Tanyaradzwa Tanatswa Mushonga and Samkeliso Suku Dube, Department of Computer Science, Faculty of Applied Sciences, National University of Science and Technology, Bulawayo, Zimbabwe
Abdulhadi A. Altherwi, Industrial Engineering Department, College of Engineering and Computer Sciences, Jazan University, Jazan, Saudi Arabia
Michael Emezirinwune, Institute of System Science, Durban University of Technology, Durban, South Africa
Olubayo Babatunde and Oludolapo Olanrewaju, Department of Industrial Engineering, Durban University of Technology, Durban, South Africa Institute of System Science, Durban University of Technology, Durban, South Africa
Ayora Córdova and Alejandro Leonardo, Industrial Engineering, University of Lima, Lima, Perú Campos Rivera and Jose Rodrigo, Industrial Engineering, University of Lima, Lima, Perú
Rafael Mauricio Villanueva Flores, University of Lima, Lima, Perú
ID 63 A Data-Driven Model for Forecasting Cost and Schedule Overruns in Infrastructure Projects
Akinlo Olorunju Mogbojuri and Oludolapo Akanni Olanrewaju, Department of Industrial Engineering, Durban University of Technology, South Africa Institute of System Science, Durban University of Technology, South Africa
Manduth Ramchander and Sibahle Shandu, Operations and Quality Management, Faculty of Management Sciences, Durban University of Technology, KwaZulu Natal, South Africa
ID 65 Application of Smart Technology, IoT, GIS And AI in Sustainable Critical Minerals Development
- Mudyazhezha, M. M. Manyuchi and C. Mbohwa., Sustainable Technology Environmental Management Company, Harare, Zimbabwe Sustainability and Future Technologies Center, University of South Africa, Pretoria, South Africa Germany Biomass Research Center, Leipzig, Germany
- Stinner., Germany Biomass Research Center, Leipzig, Germany
- Sukdeo, Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 66 Application of AI and GIS in Wastewater Treatment
- Kampila, M. M. Manyuchi and C. Mbohwa, Sustainable Technology Environmental Management Company, Harare, Zimbabwe, Sustainability and Future Technologies Center, University of South Africa, Pretoria, South Africa
- Stinner, Germany Biomass Research Center, Leipzig, Germany
- Sukdeo, Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 67 Generation of Heavy Metals Contaminants in the Mining Sector and Impact on the Environment
- Mpofu, M. M. Manyuchi and C. Mbohwa, Sustainable Technology Environmental Management Company, Harare, Zimbabwe Sustainability and Future Technologies Center, University of South Africa, Pretoria, South Africa
- Stinner, Germany Biomass Research Center, Leipzig, Germany
- Sukdeo, Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Mercy Manyuchi., C. Mbohwa and Nita Sukdeo, Sustainability and Future Technologies Center, University of South Africa, Pretoria, South Africa
Constance Mudyazhezha, Sustainable Tech Environmental Management Company, Zimbabwe, Zimbabwe
ID 69 Environmental Impacts for Potential to Produce Battery Materials from Waste Biomass
- Bhanda, M. M. Manyuchi and C. Mbohwa, Sustainable Technology Environmental Management Company, Harare, Zimbabwe, Sustainability and Future Technologies Center, University of South Africa, Pretoria, South Africa Germany Biomass Research Center, Leipzig, Germany
- Stinner, Germany Biomass Research Center, Leipzig, Germany
- Sukdeo, Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 70 Evaluation of Modelling Techniques for Colocation Data Center Selection
Tshepo Mageza, Ricky Swanepoel, and Jan-Harm C. Pretorius, Postgraduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Nontsikelelo Yvonne Dumakude, Department of Industrial and Systems Engineering, Faculty of Engineering and the Built Environment Cape Peninsula University of Technology, Cape Town, 7535, South Africa
Bingwen Yan, Department of Operations Management, Faculty of Business and Management Sciences, Cape Peninsula University of Technology Cape Town,7535, South Africa
Desiree V. Jaftha, Department of Industrial and Systems Engineering, Faculty of Engineering and the Built Environment, Cape Peninsula University of Technology, Cape Town, 7535, South Africa
Malcolm Smith, Mia Mangaroo-Pillay, and Vanya Jansen, Department of Industrial Engineering, Stellenbosch University, South Africa
ID 75 Accelerating Digital Transformation Through Adaptability
Jὒrgens Frerk and Nelson Sizwe Madonsela, Faculty of Engineering and the Built Environment, University of Johannesburg, P.O. Box 524, Auckland Park, 2006, South Africa
Michelle Smit, Department of Industrial Engineering, Stellenbosch University, Stellenbosch, South Africa
Russel Christian T. Robles, Jan Lester D. Jalova, Sean Jericho V. Leoncio and Matt Rosswell C. Rojas, Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, Manila, Philippines
Yoshiki B. Kurata, Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, Manila, Philippines
ID 80 Integrating Water and Energy Usage in Airport Performance Management
Lindokuhle Tshuma, Sunita Kruger and Annlizé Marnewick, Postgraduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa
Sechaba Morajane, Postgraduate School of Engineering Management, University of Johannesburg, South Africa
Samuel L Gqibani, Mechanical and Industrial Engineering Technology, University of Johannesburg, South Africa
Annlizé L Marnewick, Postgraduate School of Engineering Management, University of Johannesburg, South Africa
ID 82 Seaport Performance Indicators and their Macroeconomic Spillovers: An SLR
Jan-Louis Grundlingh, Mia Mangaroo-Pillay, and Leila Goedhals-Gerber, Department of Industrial Engineering, Stellenbosch University, South Africa
- L. Devaraj, B. B. S. Makhanya and J.H.C Pretorius, Postgraduate School of Engineering Management, University of Johannesburg, Johannesburg, South Africa
ID 84 An SLR on the Implementation of Industry 4.0 Within the South African Automotive Industry
Johann Wahl, Mia Mangaroo-Pillay and Edward Davies, Department of Industrial Engineering, Faculty of Engineering, Stellenbosch University Stellenbosch 7600, South Africa
Adebayo Dosa, Department of Industrial Engineering, Durban University of Technology, Durban 4001, South Africa Institute of Systems Science, Durban University of Technology, Durban 4001, South Africa
Oludolapo Akanni Olanrewaju, Institute of Systems Science, Durban University of Technology, Durban 4001, South Africa
Felix Mora – Camino, Institute of Systems Science, Durban University of Technology, Durban 4001, South Africa Industrial Engineering Department, Universidade Federal Fluminese in Niteroi, Rio de Janeiro 24020, Brazil
Adebayo Dosa, Department of Industrial Engineering, Durban University of Technology, Durban 4001, South Africa Institute of Systems Science, Durban University of Technology, Durban 4001, South Africa
Oludolapo Akanni Olanrewaju, Institute of Systems Science, Durban University of Technology, Durban 4001, South Africa
Felix Mora – Camino, Institute of Systems Science, Durban University of Technology, Durban 4001, South Africa Industrial Engineering Department, Universidade Federal Fluminese in Niteroi, Rio de Janeiro 24020, Brazil
Khanyelwa Masemola, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
Save Akilimalissiga, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
Khathutshelo Mushavhanamadi, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
ID 92 Experimental and Kinetic Study of CO₂ Absorption in a NaOH Spray Dryer System
Lawrence Koech, Kasturie Premlall, Douw Faurie and Brilliant Vunene Chauke, Chemical, Metallurgical and Materials Engineering, Faculty of Engineering & the Built Environment, Tshwane University of Technology, Pretoria, South Africa
Rutendo Rose Nzuwa, Department of Industrial and Engineering Systems, Faculty of Engineering and the Built Environment, Cape Peninsula University of Technology, Bellville 7535, Cape Town, South Africa
Bingwen Yan, Department of Operations Management, Faculty of Business and Management Sciences, Cape Peninsula University of Technology Cape Town,7535, South Africa
Rumbidzai Muvunzi, School of Mechanical, Industrial & Aeronautical Engineering, University of the Witwatersrand, Braamfontein 2000, Johannesburg, South Africa
Senthil Krishnamurthy, Department of Electrical, Electronic and Computer Engineering, Faculty of Engineering and the Built Environment Cape Peninsula University of Technology, Bellville 7535, Cape Town, South Africa
Sue-Ann Muller, Department of Industrial and Systems Engineering, Faculty of Engineering and the Built Environment, Cape Peninsula University of Technology, Cape Town 7535, South Africa
Bingwen Yan, Department of Operations Management, Faculty of Business and Management Sciences, Cape Peninsula University of Technology 7535 Cape Town, South Africa
Tinashe Tendayi, Department of Industrial and Systems Engineering, Faculty of Engineering and the Built Environment, Cape Peninsula University of Technology, Cape Town 7535, South Africa
Yasser U. Guro, Mary Jeannette Juan, John Paulo G. Sillano, and Arabella Vergara, Industrial Engineering, University of Santo Tomas, Philippines
Damirson A. Co, MSIE, PIE, Department of Industrial Engineering, University of Santo Tomas, Sampaloc, Manila, Philippines
Jamie Lamprecht and Mia Mangaroo-Pillay, Industrial Engineering, Faculty of Industrial Engineering, Stellenbosch University, Cape Town, South Africa
ID 99 Exploring Consumer Readiness and Satisfaction in the Adoption of QR Ph Standard
Yves Adam B. Alvarez, Jean Russel V. Cabusas, Denyael Day C. Dacanay, Franz Angelo Lewis T. Dar, Raymond Vincent E. De Jesus, Shaun Matthew C. De Leon, John Lester B. Dela Paz, Frederick Norman Raei A. Dimaano and Maricar M. Navarro, Industrial Engineering Program, College of Engineering and Architecture, Technological Institute of the Philippines, Quezon City, Philippines
Ronieca Marie M. Nicandro, Julia Theresa F. Gavino, Yumiko Hyacinth Mae Paderes and Emmanuel P. Nicolas, 4th Year Industrial Engineering Students, Department of Industrial Engineering, University of Santo Tomas – Manila, Manila, Philippines
Carlos Ignacio P. Lugay, Jr., PhD, PIE, ASEAN Engr.,Professor, Department of Industrial Engineering, University of Santo Tomas – Manila, Manila, Philippines
Krizzah Ysabelle A. Briso, Hani P. Columbano, Isabelle Marie R. Coruña, Leslie V. Llarena, and Carlos Ignacio P. Lugay Jr., PhD, PIE, ASEAN Engr., Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, España Blvd., 1015, Manila, Philippines
Bingwen Yan, Department of Operations Management, Faculty of Business and Management Sciences, Cape Peninsula University of Technology Cape Town, 7535, South Africa
Vuyokazi Maku, Department of Operations Management, Faculty of Business and Management Sciences, Cape Peninsula University of Technology Cape Town, 7535, South Africa
Johanne Simone G. Calderon, Ma. Sophia S. Chuaquico, Jonathan R. Garcia and Lyka P. Lavarias, Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, Manila, Philippines
Yoshiki B. Kurata, Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, Manila, Philippines
Farit Gianpierre Espinoza Espino, Bachelor in Industrial Engineering, Faculty of Engineering, Universidad de Lima, Lima, Perú
Paul Angello Daniel Sanchez Soto and Carlos Alberto Galvez Zarate, Universidad de Lima, Facultad de Ingeniería, Lima, Perú
ID 111 Laser-Wire Additive Manufacturing: A Review of Applications and Research Gaps
Simon Robel, Faculty of Mechanical Engineering, Chemnitz University of Technology, 09111 Chemnitz, Germany
Stephen Matope, Department of Industrial Engineering, Stellenbosch University, Stellenbosch, South Africa
Mpho Hlongwane, S Gqibani and P Anup, School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa
ID 115 Barriers and Enablers of Sustainable Smart Manufacturing in Resource-Constrained SMEs
Kazeem Aderemi Bello, Department of Mechanical Engineering Faculty of Engineering and the Built Environment, Durban University of Technology, Durban, South Africa
Rendani Wilson Maladzhi, Department of Mechanical, Faculty of Engineering and the Built Environment, Durban University of Technology, Durban, South Africa
ID 117 Transitioning Firms to a Sustainable Ecosystem
Ngaka Mosia, UNISA, South Africa
ID 120 Student Barriers for Transitioning a Curriculum Delivery Grid in a Distance Education Setting
Ngaka Mosia, UNISA, South Africa
Giacomo Gómez Sánchez Angeldonis y Rodrigo Arcaya Huayamares, Universidad de Lima, Faculty of Engineering, Lima, Perú
Paul Angello Daniel Sanchez-Soto, Universidad de Lima, Faculty of Engineering, Lima, Perú
Carlos Alberto Galvez Zarate, Universidad de Lima, Faculty of Engineering, Lima, Perú
Stefany Isabel Estela Meza and Dayan Melanie Aponte Sebastián, Industrial Engineering, Faculty of Engineering, University of Lima, Lima, Peru
Paul Angello Sanchez-Soto and Carlos Alberto Galvez Zarate, Research Professors, Faculty of Engineering, University of Lima, Lima, Peru
ID 124 Improvement Model to Increase Operational Efficiency in a Pizzeria Using SLP, TOC and 5S
Erwin Renato Fernández Pizango and Aldo André Peralta Cabanillas, Facultad de Ingeniería y Arquitectura, Universidad de Lima, Lima, Peru
Paul Angello Daniel Sánchez Soto and Carlos Alberto Gálvez Zárate, Facultad de Ingeniería y Arquitectura, Universidad de Lima, Lima, Peru
ID 125 Towards Sustainable Filter Production: Manufacturing Practices and Operational Improvements
Palesa Gladys Shamase, Lucrecia Valentine, and Bharet Morar, Industrial and Systems Engineering, Faculty of Engineering and the Built Environment, Cape Peninsula University of Technology, Cape Town, South Africa
Rumbidzai Muvunzi and Blessed Sarema, School of Mechanical, Industrial and Aeronautical Engineering, University of the Witwatersrand, Johannesburg, South Africa
Tinashe Tendayi, Lecturer, Department of Industrial Engineering & Systems Engineering, Cape Peninsula University of Technology, Bellville, Cape Town, South Africa
Blessed Sarema, Lecturer, School of Mechanical, Industrial and Aeronautical Engineering, University of the Witwatersrand, Johannesburg, South Africa
Lucrecia Valentine, Programme Coordinator for Postgraduate Research, Department of Industrial Engineering & Systems Engineering, Cape Peninsula University of Technology, Bellville, Cape Town, South Africa
Rumbidzai Muvunzi, School of Mechanical, Industrial and Aeronautical Engineering, University of the Witwatersrand, Johannesburg, South Africa
Dennit Quewan Adams, Industrial and Systems Engineering, Faculty of Engineering and the Built Environment, Cape Peninsula University of Technology, Cape Town, South Africa
Gerrit Rohwäder and Lene Gimbel, Final Year Students – Industrial Engineering, Department of Industrial Engineering, Hochschule Dusseldorf, University of Applied Science, Dusseldorf, Germany
Lene Gimbel, Final Year Student – Industrial Engineering, Department of Industrial Engineering, Hochschule Dusseldorf, University of Applied Science, Dusseldorf, Germany
ID 129 Application of an Adaptive Results-Driven Curriculum[A case of ODeL engineering tuition]
Ngaka Mosia, UNISA, South Africa
Andani Gudumi, Department of Industrial Engineering, Operations Management and Mechanical Engineering, Faculty of Engineering, Vaal University of Technology, Vanderbijlpark, South Africa
Asser Letsatsi Tau, Department of Operations Management, Faculty of Management Science, Tshwane University of Technology, Pretoria, South Africa
Emmanuel Innocents Edoun and Solly Pooe, Tshwane School for Business and Society, Pretoria, South Africa
Eng. Joel Nadebu Ouma, Senior Electrical Engineer, State Department for Public Works, Nairobi, Kenya
Eng. Japheth Davies Bwire, Senior Engineer, EirGrid PLC, Ireland
Ngaka Mosia, UNISA, South Africa
Bwire Davies Japheth, Postgraduate Student, Jomo Kenyatta University of Agriculture and Technology, Kenya
Simo Khumalo, Department of Quality and Operations Management, Faculty of Engineering and the Built Engineering , University of Johannesburg , 55 Beit St, Doornfontein, Johannesburg, 2028, South Africa
Sizwe Mkwanazi, Department of Business Management, College of Business and Economics, University of Johannesburg, Chris Hani, Soweto, Johannesburg, 1809, South Africa
Nelson Sizwe Madonsela, Department of Quality and Operations Management , Faculty of Engineering and the Built Engineering , University of Johannesburg , 55 Beit St, Doornfontein, Johannesburg , 2028, South Africa
Ayca ÖZCEYLAN, Oguzeli Vocational School, Gaziantep, Türkiye
ID 156 Service Level Improvement through TPM and EOQ Model in a Fumigation Company
Diego Eduardo Bonifaz Salazar and Jorge Luis Matos Rojas, Universidad de Lima, Facultad de Ingeniería, Lima, Peru
Paul Angello Daniel Sanchez Soto and Carlos Alberto Galvez Zarate, Universidad de Lima, Facultad de Ingeniería, Lima, Peru
ID 157 Leadership and Sustainability in the Manufacturing Industry: A Progressive Model
Karl Robert van der Merwe, Department of Industrial Engineering, Faculty of Engineering, Built Environment and Technology, Nelson Mandela University, Gqeberha, South Africa
Oswald Franks, Strategic Projects, Nelson Mandela University, Gqeberha, South Africa
Richard Noor, Group Managing Director, H&M Group, Cape Town, South Africa
Brink Botha, Faculty of Business and Management Sciences, Head of Department: Management and Project Management, Cape Peninsula University of Technology, Cape Town, South Africa
Bingwen Yan, Faculty of Business and Management Sciences, Head of Department: Operations Management, Cape Peninsula University of Technology, Cape Town, South Africa
ID 159 Lifecycle-Based Maintenance Optimisation for Aging Mining Assets
Shoni Whitney Mathivha, Jan Harm C Pretorius and Leon Pretorius, Postgraduate School of Engineering Management, Faculty of Engineering and Built Environment, University of Johannesburg, South Africa
Mohammed Alquraish, Industrial Engineering Department, College of Engineering, University of Bisha, Bisha 61922, Saudi Arabia
Rashid Abrar Tanzil, Shaikh Shehab Ahamed, Shabin Rahman, Rafia Nur Rimti and Mohammad Shahad Raihan, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology, Bangladesh
Shahir Rahman, Department of Mechanical Engineering, Bangladesh University of Engineering & Technology, Bangladesh
ID 170 The Impact of Weld Quality Analysis in the Automotive Supply Chain in South Africa
John Zvidzayi, Mangosuthu University of Technology, Department of Mechanical Engineering, South Africa
Khathutshelo Mushavhanamadi, Professor, Department of Quality and Operations Management, Faculty of Engineering, University of Johannesburg Johannesburg, South Africa
Eric Mikobi Bakama, Department of Operations and Quality Management, Faculty of Management Sciences, Durban University of Technology Durban, South Africa
Kgomotso Portia Penane, Department of Quality and Operations Management, Faculty of Engineering, University of Johannesburg, South Africa
Jesselyn B. Alcain, MS, UST Faculty of Engineering – Faculty Member, Department of Industrial Engineering, University of Santo Tomas, Manila, Philippines
Mharielle D.A. Bustamante, Chelsey Joyce P. Cortez, Kate Lorien A. De Guzman and Jessca Rwen Gamboa, 4th Year Faculty of Engineering Students, Department of Industrial Engineering, University of Santo Tomas, Manila, Philippines
ID 177 The Design of a Hydro Docking System for a Small Town Harbour
Samkelisiwe Muthwa, Noxolo Nxumalo and Pinky Nzama, Department of Mechanical Engineering, Faculty of Engineering and the Built Environment Mangosuthu University of Technology, Durban, South Africa
Vuyo Katiya and John Zvidzayi, Department of Mechanical Engineering, Faculty of Engineering and the Built Environment, Mangosuthu University of Technology, Durban, South Africa
Silver Takudzwa Machisa, Department of Industrial and Engineering Systems, Faculty of Engineering and the Built Environment, Cape Peninsula University of Technology, Bellville 7535, Cape Town, South Africa
Bingwen Yan, Department of Operations Management, Faculty of Business and Management Sciences, Cape Peninsula University of Technology Cape Town,7535, South Africa
Rumbidzai Muvunzi, School of Mechanical, Industrial & Aeronautical Engineering, University of the Witwatersrand, Braamfontein, Johannesburg, South Africa
Senthil Krishnamurthy, Department of Electrical, Electronic and Computer Engineering, Faculty of Engineering and the Built Environment Cape Peninsula University of Technology, Bellville 7535, Cape Town, South Africa
Engr. Jesselyn B. Alcain, Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, Manila, Philippines
Caelyn Adelle C. Babaran, Earl Christian L. Banawa, Gerald G. Buela, and Jansen Rafael P. Galvez, Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, Manila, Philippines
Douw G Faurie, Kasturie Premlall and Andrei Kolesnikov, Department of Chemical, Metallurgical, and Materials Engineering, Tshwane University of Technology, Pretoria, Republic of South Africa
Mykhaylo Lototskyy, HySA Systems, South African Institute for Advanced Materials Chemistry, University of the Western Cape, Cape Town, Republic of South Africa
Asser Letsatsi Tau, Department of Operations Management, Faculty of Management Sciences, Tshwane University of Technology, Pretoria, South Africa
Emmanuel Innocents Edoun and Solly Pooe, Tshwane School for Business and Society, Pretoria, South Africa
Delia Malejane, Department of Industrial Engineering, Operations Management and Mechanical Engineering, Faculty of Engineering, Vaal University of Technology, Vanderbijlpark, South Africa
Jesselyn B. Alcain, Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, Manila, Philippines
Darren Josh L. Briones, John Kenneth L. Garces, David Jacob A. Genetia, Juliana Kate Unidad, and Dave Villanueva, Department of Industrial Engineering, Faculty of Engineering, University of Santo Tomas, Manila, Philippines
Winston I Chapanda, Postgraduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Edoghogho Ogbeifun, Civil Engineering Department, Faculty of Engineering, University of Johannesburg, South Africa
Jan-Harm C. Pretorius, Postgraduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Asser Letsatsi Tau, Department of Operations Management, Faculty of Management Sciences, Tshwane University of Technology, Pretoria, South Africa
Emmanuel Innocents Edoun and Solly Pooe, Tshwane School for Business and Society, Pretoria, South Africa
Kenneth. C. Nwala, Moses. J.B. Kabeyi and Oludolapo. A. Olanrewaju , Department of Industrial Engineering, Durban University of Technology, Durban 4001, South Africa Institute of System Science, Durban University of Technology, Durban 4001, South Africa
ID 189 Optimization, Design and Analysis of Steering Knuckle Component tailored for Nigerian Roads
Adeleke Tunde Basit, Institute of Systems Science, Durban University of Technology, Durban, South Africa
Olanrewaju Oludolapo Akanni, Institute of Systems Science, Durban University of Technology, Durban, South Africa
Awodoyin Emmanuel Tomisin, Department of Mechanical Engineering, Bells University of Technology, Ota, Nigeria
Adeleke Tunde Basit, Institute of Systems Science, Durban University of Technology, Durban, South Africa.
Olanrewaju Oludolapo Akanni, Institute of Systems Science, Durban University of Technology, Durban, South Africa.
Abarikwwu Anulika Ebere, Department of Mechanical Engineering, College of Engineering, Bells University of Technology, Ota, Ogun State, Nigeria
Ornella Tambwe, Clinton Aigbavboa, and Ntsindiso Mphoqo, CIDB Centre for Excellence & Sustainable Construction Management and Leadership in the Built Environment, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 193 Predicting Machine Failures and Failure Modes Using Supervised Machine Learning Techniques
Majd Faris Al-atrash, Amman, Jordan
ID 195 Optimisation of Medical Device Design Transfer Procedure
Nkhodeni Praise Mukwevho, Industrial and Systems Engineering, Faculty of Engineering and the Built Environment, Cape Peninsula University of Technology, Cape Town, South Africa
Bronwyn Swartz, Cape Peninsula University of Technology, Cape Town, South Africa
Wandile Masango, Department of Industrial Engineering, Faculty of Engineering and the Built Environment, Durban University of Technology Durban, 4000, South Africa
Matshidiso Moso, Department of Industrial Engineering, Durban University of Technology, Durban, 4000, South Africa
Oludolapo Olanrewaju, Department of Industrial Engineering, Durban University of Technology, Durban, 4000, South Africa
ID 197 Biomethane Market and Future Prospects
Moses Jeremiah Barasa Kabeyi, Department of Industrial Engineering, Durban University of Technology, Durban, South Africa
Oludolapo Akanni Olanrewaju, Industrial Engineering Department and Institute of Systems Science, Durban University of Technology, Durban, South Africa
ID 198 Developing an IoT-enabled Hospital smart workspace
Masingita Onica Mohlala and Ngaka Mosia, Industrial Engineering and Engineering Management, School of Engineering and the Built Environment University of South Africa, Florida, South Africa
ID 199 Determinants of Trust and Adoption in Human-Robot Collaboration: An Industrial Perspective
Masingita Onica Mohlala and Ngaka Mosia, Industrial Engineering and Engineering Management, School of Engineering and the Built Environment University of South Africa, Florida, South Africa
ID 200 Integrating Cyber-Physical Systems in Manufacturing: Challenges and Future Directions
Masingita Onica Mohlala and Ngaka Mosia, Industrial Engineering and Engineering Management, School of Engineering and the Built Environment University of South Africa, Florida, South Africa
ID 202 Smart Grids and their Role in Smart Mobility
Moses Jeremiah Barasa Kabeyi, Department of Industrial Engineering, Durban University of Technology, Durban South Africa
Oludolapo Akanni. Olanrewaju, Industrial Engineering Department and Institute of Systems Science, Durban University of Technology, Durban, South Africa
ID 203 Plastic Wastes to Energy Pathways
Dr. Moses Jeremiah Barasa Kabeyi and Prof Oludolapo Akanni Olanrewaju, Industrial Engineering Department and Institute f System science, Durban University of Technology, Durban South Africa
ID 204 Developing Adaptive and Resilient Manufacturing Systems Through Smart Technology Integration
Masingita Onica Mohlala, Ramdass Kemlall and Ngaka Mosia, Industrial Engineering and Engineering Management, School of Engineering and the Built Environment, University of South Africa, Florida, South Africa
ID 206 Big Data Analytics [A case of Healthcare Operations in SA]
Ngaka Mosia and Ramdass Kemlall, Industrial Engineering and Engineering Management, College of Science, Engineering, and Technology, School of Engineering, University of South Africa, Gauteng, South Africa
ID 208 Energy Harvesting from A Typical Wastewater Treatment Plant
Josphine Muringi Kimotho, Mechanical and Manufacturing Engineering, Faculty of Engineering, University of Nairobi, Nairobi, Kenya
Dr. Moses Jeremiah. Barasa Kabeyi, Department of Industrial Engineering, Durban University of Technology, South Africa.
Prof Oludolapo .Akanni. Olanrewaju, Department of Industrial Engineering, Durban University of Technology, South Africa.
ID 209 Energy Sustainability Through Generation Decentralization
Moses Jeremiah Barasa Kabeyi, Industrial Engineering Department, Durban University of Technology, Durban South Africa
Oludolapo Akanni. Olanrewaju, Industrial Engineering Department, Durban University of Technology, Durban South Africa
Nyaka Crisantia Dinah, Industrial Engineering and Engineering Management, College of Science, Engineering, and Technology, School of Engineering, University of South Africa, Gauteng, South Africa
Ngaka Mosia, Industrial Engineering and Engineering Management, College of Science, Engineering, and Technology, School of Engineering University of South Africa, Gauteng, South Africa
ID 211 Adaptive Learner Progression and Support for At-Risk Engineering Students in Odel
Crisantia Nyaka, University of South Africa, South Africa
Zanele Mpanza, Department of Industrial Engineering, School of Engineering, University of South Africa, Pretoria, South Africa
Bingwen Yan, Industrial and Systems Engineering, Faculty of Engineering and the Built Environment, Cape Peninsula University of Technology Cape Town, South Africa
Tshifhiwa Edwin Mulaudzi, Department of Industrial Engineering, School of Engineering, University of South Africa, Pretoria, South Africa
Jesselyn Alcain, Michael Hachijin L. Monsanto, Andrea Denisse M. Solomon, Diana Marie Supremo, and Johann Sebsastien M. Vizconde, Department of Industrial Engineering, University of Santo Tomas, Sampaloc, Manila, 1008, Philippines
Ramatsobane Dineo Johanna Lediga, Khathutshelo Mushavhanamadi, Save Akilimalissiga and Thabiso Mokoena, Depatment of Quality and Operations Management, Faculty of Engineering and the Built Environment Engineering, University of Johannesburg, Johannesburg, South Africa
ID 216 A Development of an Agile Supply Chain Network Model
Koketso Masenya, Department of Industrial Engineering and Engineering Management, School of Engineering, College of Sciences Engineering and Technology, University of South Africa (UNISA), Gauteng, South Africa
Ngaka Mosia, Department of Industrial Engineering and Engineering Management, School of Engineering, College of Science, Engineering, and Technology, University of South Africa (UNISA), Gauteng, South Africa
ID 217 Application of a proactive workplace risk management strategy
Koketso Masenya, Department of Industrial Engineering and Engineering Management, School of Engineering, College of Sciences Engineering and Technology, University of South Africa (UNISA), Gauteng, South Africa
Ngaka Mosia, Industrial Engineering and Engineering Management, School of Engineering, College of Science, Engineering, and Technology University of South Africa, Gauteng, South Africa
ID 218 Engineering Education in Zimbabwe: Challenges, Progress, and Future Prospects
Hagreaves Kumba, and Oludolapo Akanni, Industrial Engineering Department, Faculty of Engineering and the Built Environment, Durban University of Technology, Durban, South Africa
Anesu Nicholas Charamba, School of Electrical and Information Engineering, University of the Witwatersrand, Johannesburg, South Africa
Ratidzo Pasipamire, Department of Mechanical Engineering, Faculty of Engineering and Geosciences, Midlands State University, Zimbabwe
Egina Nyati, Department of Electrical and Electronic Engineering, Faculty of Engineering and Geosciences, Midlands State University, Zimbabwe
Thabiso Mokoena and Khathutshelo Mushavhanamadi, Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa
ID 220 Digital Competencies for Pedagogy programs in the new Normal
Koketso Masenya and Ngaka Mosia, Industrial Engineering and Engineering Management, School of Engineering, College of Science, Engineering, and Technology, University of South Africa, Gauteng, South Africa
Refilwe Sophy Matlakala, Department of Quality & Operations Management, Faculty of Engineering and the Built Environment University of Johannesburg, Johannesburg, South Africa
Daramy Vandi Von Kallon, Department of Mechanical and Industrial Engineering Technology, Faculty of Engineering and the Built Environment University of Johannesburg, Johannesburg, South Africa
Jared Nganyi, Industrial Process Automation, Embedded Systems and Robotics Engineering, Technical Engineering Consultant, Embedtech Automation Technologies Limited, Nairobi, Kenya
Shubi F. Kaijage, Associate Professor of Electronics Engineering and Information, School of Computational and Communication Science and Engineering (CoCSE), The Nelson Mandela African Institution of Science and Technology (NM-AIST), Arusha, Tanzania
Joel Nadebu Ouma, Senior Superintending Engineer, The State Department for Public Works, Nairobi, Kenya
Shakiru Idrissa Kajugus, Director Business Development
Mathew Mwangomba, General Manager, Tanzania Geothermal Development Company Limited (TGDC), Dar es Salaam, Tanzania
Refilwe Sophy Matlakala, Department of Quality & Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa
Daramy Vandi Von Kallon, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa
Jan Adrian Angeles, Ricardo Rogelio de la Rosa IV, Charlie Marquez andElton John Taniegra, Faculty of Engineering, University of Santo Tomas – Philippines
ID 225 Optimizing Reverse Logistics in Aluminium (An Industry Specific case in South Africa)
Ngaka Mosia, Industrial Engineering and Engineering Management, College of Science, Engineering, and Technology, School of Engineering University of South Africa, Gauteng, South Africa
ID 226 Disruptive Technologies Enhancing Learners’ Experience in Teaching and Learning
Zanele Mpanza, University of South Africa, South Africa
Ondari Okemwa, and Donell Agwanda, Student Mechanical Engineer, Faculty of Engineering, University of Nairobi, Nairobi, Kenya
Charo Safari Karisa, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, University of Nairobi, Kenya
Denis Kioko, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, University of Nairobi, Kenya
Ogunmefun, O. Anthony, Teffo, M. Linda, Mavhungu, M. Lucey, Sadiku, E. Rotimi, and Mkatshwa, S. Francisca, Department of Chemical, Metallurgical and Materials Engineering, Tshwane University of Technology, Pretoria West Campus, South Africa
ID 258 Application of the Case method in engineering education
Dakalo Malada-Nengovhela, Department of Industrial Engineering, University of South Africa, South Africa
Ngaka Mosia, Department of Industrial Engineering, University of South Africa, South Africa
Matshepo Mokoka, Ngaka Mosia and Bongumenzi Mncwango, University of South Africa
South Africa
Refilwe Sophy Matlakala, Department of Quality & Operations Management, Faculty of Engineering and the Built Environment University of Johannesburg, Johannesburg, South Africa
Daramy Vandi Von Kallon, Department of Mechanical and Industrial Engineering Technology, Faculty of Engineering and the Built Environment University of Johannesburg, Johannesburg, South Africa
Joseph Ogudi and Marianna Kharlamova, Department of Environmental Safety and Product Quality Management, Institute of Environmental Engineering, RUDN University, 6 Miklukho-Maklaya St., 117198 Moscow, Russian Federation, Russia
Blessing George Akpan, and Raveen Rathilall, Department of Operations and Quality Management, Faculty of Management Science, Durban University of Technology, Durban, South Africa
ID 274 Dynamic Analysis of Hybrid Water and Energy System in Smart Cities
Linda Mphahlele, Department of Mechanical Engineering Science, University of Johannesburg, Johannesburg, South Africa
Motsi Matlakala, Department of Mechanical Engineering Science, University of Johannesburg, Johannesburg, South Africa
Shelly Thandiwe Mona, Product Development Technology Station, Central University of Technology, Free State, South Africa
Kennedy Wambua Joel, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, University of Nairobi, Nairobi, Kenya
Moses Jeremiah Barasa Kabeyi, Department of Industrial Engineering and Institute of Systems Science, Durban University of Technology, Durban, South Africa
Oludolapo. Akanni. Olanrewaju, Industrial Engineering Department and Institute of System science, Durban University of Technology, Durban, South Africa
ID 278 Design and Modelling of a Campus-Scale Microgrid for the University of Nairobi
Dr. Moses Jeremiah Barasa Kabeyi, Department of Industrial Engineering, Durban University of Technology, Durban South Africa
Ariel Amani, Faculty of Engineering, Department of Mechanical and Manufacturing Engineering, University of Nairobi, Nairobi, Kenya
Patrick Webuye, Faculty of Engineering, Department of Mechanical and Manufacturing Engineering, University of Nairobi, Nairobi, Kenya
Joseph Boateng Arhin, Ghana Rubber Estates Ltd, Procurement Department, Takoradi, Ghana
Nana Agyeman-Prempeh, Ghana Communication Technology University, Business School, Department of Procurement, Logistics and Supply Chain Management, Ghana
Felix Anim, Anglo Gold Chirano Ltd., Supply Chain Department, Ghana
Martin Puwurayire, Ghana Revenue Authority, Transformation Office, Ghana
Bernard Oracca-Tetteh, Asante Gold Chirano Ltd, Infrastructure Maintenance Office, Ghana
Daniel Osei, Ghana Phoenix Insurance Co.Ltd, Treasury Department, Ghana
Nkululeko Patrick Jama, Opeyeolu Timothy Laseinde and Lagouge Tartibu, Department of Mechanical and Industrial Engineering Technology University of Johannesburg, Johannesburg, Republic of South Africa
Nkululeko Patrick Jama, Opeyeolu Timothy Laseinde and Lagouge Tartibu, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, Republic of South Africa
Nkululeko Patrick Jama, Opeyeolu Timothy Laseinde and Lagouge Tartibu, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, Republic of South Africa
Nana Agyeman-Prempeh, Ghana Communication Technology University, Business School, Department of Procurement, Logistics and Supply Chain Management
Abdullah Bayat, Faculty of Economics and Management Science, Department of Marketing and Entrepreneurship. South Africa
Abdalla Mohammed Bashir, Faculty of Economics and Management Science, Department of Marketing and Entrepreneurship. South Africa
Emmanuel Udekwe, Faculty of Economics and Management Science, Department of Marketing and Entrepreneurship. South Africa
Joseph Boateng Arhin, Logistics and Supply Chain Management, Department of Procurement, Ghana Communication Technology University, Business School, Ghana
Joseph Afari-Buabeng, Ghana Communication Technology University, Business School, Department of Procurement, Logistics and Supply Chain Management
ID 293 Evaluating Challenges in Implementing SDG 7 in Existing Buildings in Johannesburg
Connie Mocumi, Faculty of Engineering and the Built Environment, University of Johannesburg, Gauteng, South Africa
Gift Laolang, Faculty of Engineering and the Built Environment, Walter Sisulu University, East London, Eastern Cape, South Africa
Motheo Meta Tjebane, Faculty of Engineering and the Built Environment, Durban University of Technology, Durban, KwaZulu-Natal, South Africa
- Marange, A. Musarurwa and L. Gudukeya, Department of Industrial and Mechatronics Engineering, University of Zimbabwe, Mount Pleasant, Harare, Zimbabwe
Carol Dineo Diale-Makgetla PhD., Industrial and Organisational Psychology, College of Economic and Management Sciences University of South Africa, Tshwane, South Africa
Betty Portia Maphala PhD., Industrial and Organisational Psychology, College of Economic and Management Sciences, University of South Africa Tshwane, South Africa
Betty Portia Maphala, Industrial and Organisational Psychology, College of Economic and Management Sciences, University of South Africa, Tshwane, South Africa
Carol Dineo Diale-Makgetla, Industrial and Organisational Psychology, College of Economic and Management Sciences, University of South Africa, Tshwane, South Africa
Tharelelo Mokgokong, Industrial Engineering, Faculty of Engineering and the Built Environment, Tshwane University of Technology, Pretoria, South Africa
T Kunene and F Chiroma, Department of Mechanical, Robotics and Industrial Engineering, University of Johannesburg, Johannesburg, South Africa
V Hashe, Department of Mechanical Engineering, Walter Sisulu University, Johannesburg, South Africa
Nthethele Thakhisi, Chikezirim Okorafor and Motheo Meta Tjebane, Faculty of Engineering and the Built Environment, Durban University of Technology, Durban, KwaZulu Natal, South Africa
Gift Laolang, Faculty of Engineering and the Built Environment, Walter Sisulu University, East London, Eastern Cape, South Africa
Rodolfo Morocho-Caballero, Facultad de Ingeniería, Universidad de Lima, Peru
Fabiola Mariafernanda Sanchez-Picho, Facultad de Ingeniería, Universidad de Lima, Peru
Javier Saul Cordova-Ramos, Research Professor, Facultad de Ingeniería, Universidad de Lima, Peru
Jahid Hasan Ashik and Nazma Sultana, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology, Khulna-9203, Bangladesh
Dhaaruni Ankiah and Sugandren Naidoo, Department of Operations Management, College of Economic and Management Sciences, University of South Africa, South Africa
Polite Mukonori and Sugandren Naidoo, Department of Operations Management, College of Economic and Management Sciences, University of South Africa, South Africa
Olubayo Babatunde, and Desmond E. Ighravwe, Department of Industrial Engineering, Durban University of Technology, Durban, South Africa Institute of System Science, Durban University of Technology, Durban, South Africa, Department of Mechanical Engineering, Bells University of Technology, Ota 112104, Nigeria
Desmond E. Ighravwe, Department of Industrial Engineering, Durban University of Technology, Durban, South Africa, Institute of System Science, Durban University of Technology, Durban, South Africa, Department of Mechanical Engineering, Bells University of Technology, Ota 112104, Nigeria
Michael Emezirinwune and Oludolapo Olanrewaju, Institute of System Science, Durban University of Technology, Durban, South Africa
Nikcol Kclery Morales-Yllapuma, Jorge Luis Yupanqui-Marujo and Maria Teresa Noriega-Aranibar, Faculty of Industrial Engineering, University of Lima, Lima, Peru
ID 320 Evaluation of Undulation Damage through Finite Element Simulation and Experimental Validation
- Nqabisaa, Mechanical and Mechatronic Engineering, Faculty of Engineering and the Built Environment, Cape Peninsula University of Technology Cape Town, South Africa
G.J. Oliverb, Mechanical and Mechatronic Engineering, Faculty of Engineering and the Built Environment, Cape Peninsula University of Technology Cape Town, South Africa
Thabo Khafiso and Molusiwa Stephan Ramabodu, Department of Construction Management and Quantity Surveying, Faculty of Engineering and the Built Environment, Durban University of Technology, KwaZulu-Natal, South Africa
Clinton Aigbavboa , Sustainable Human Settlement and Construction Research Center, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Samuel Adekunle, Department of Civil Engineering, Tubman University, Harper, Liberia
Major Mabuza, Department of Chemical Engineering Technology, Faculty of Engineering and the Built Environment, University of Johannesburg Johannesburg, Republic of South Africa
ID 347 An Investigation on the Flow Properties of Some Pulverized Nigerian Coals
A.T. Oyeniran, T. L., Department of Mechanical Engineering Obafemi Awolowo University, Ile-Ife, Nigeria
- L. Akpomejero and A. A. Daniya, Department of Materials Science and Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria
- Mbohwa, Department of Industrial and Engineering Management, University of South Africa, Pretoria, South Africa
Dambuwo Sekgokwa Dombo, Department of Industrial Engineering, University of South Africa, South Africa
Ngaka Mosia, Department of Industrial Engineering, University of South Africa, South Africa
ID 355 Water Desalination versus Conservation
Lindelwa Siwisa, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa
Daramy Vandi Von Kallon, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg South Africa
ID 359 A Hybrid Theoretical Framework for Technology Adoption in the Construction Industry
Siphosenkosi Zanoxolo Makaula, College of Science, Engineering and Technology, University of South Africa, Johannesburg, South Africa
ID 360 Characterization of Manufacturing Downtimes in the Automotive Industry in South Africa
John Zvidzayi, Mangosuthu University of Technology, Department of Mechanical Engineering, South Africa
John Zvidzayi, Mangosuthu University of Technology, Department of Mechanical Engineering, South Africa
ID 362 The Effectiveness of the Manufacturing Process of Automotive Door Hinges: A Case Study
John Zvidzayi, Mangosuthu University of Technology, Department of Mechanical Engineering, South Africa
Thabo Khafiso and Molusiwa Stephan Ramabodu, Department of Construction Management & Quantity Surveying, Faculty of Engineering and the Built Environment, Durban University of Technology, Kwazulu-Natal, South Africa
Clinton Aigbavboa, Sustainable Human Settlement and Construction Research Centre, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Samuel Adekunle, Department of Civil Engineering, Tubman University, Harper, Liberia
ID 364 The South African Insurance Industry’s Preparedness for Climate Change
Leuba Harold Thomas Modiba, University of Johannesburg, South Africa
K.F Chabalala, B.B.S Makhanya and J.H.C Pretorius, Postgraduate School of Engineering Management, University of Johannesburg Johannesburg, South Africa
Thabo Khafiso, Ramabodu Stephan Molusiwa and Scelo Mhlongo, Department of Construction Management and Quantity Surveying, Faculty of Engineering and the Built Environment, Durban University of Technology, KwaZulu-Natal, South Africa
K’homotho Nester Mokhojane, Department of But Environment, Faculty of Engineering and the Built Environment, Central University of Technology, Free State, South Africa
ID 388 AI-Driven Innovations in Training Delivery and Assessment
Mosia Ngaka, Department of Industrial Engineering and Engineering Management, College of Science, Engineering & Technology, University of South Africa, Johannesburg, South Africa
Bongumenzi Mncwango, Department of Industrial Engineering and Engineering Management, College of Science, Engineering & Technology, University of South Africa, Johannesburg, South Africa
Kemlall Ramdass, Department of Industrial Engineering and Engineering Management, College of Science, Engineering & Technology, University of South Africa, Johannesburg, South Africa
Muhammad Rizky Akmal Prasetya and Faranita Mustikasari, Business Management Program, Binus Business School Master Program, Bina Nusantara University, Jakarta, Indonesia
Sinah Marungane, Department of Industrial Engineering, Faculty of Engineering and the Built Environment, Tshwane University of Technology Pretoria, South Africa
Damilola G. Bobola, Department of Civil Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria
Adeyemi B. Fajobi, Department of Civil Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria
Oladeji. O. Ige, Department of Materials Science and Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria Department of Industrial Engineering, Durban University of Technology, Durban, South Africa, Institute of System Science, Durban University of Technology, Durban, South Africa
Oludolapo. A. Olanrewaju, Department of Industrial Engineering, Durban University of Technology, Durban, South Africa Institute of System Science, Durban University of Technology, Durban, South Africa
Mosia Ngaka, Bongumenzi Mncwango, and Kemlall Ramdass, Department of Industrial Engineering and Engineering Management, College of Science, Engineering & Technology, University of South Africa, Johannesburg, South Africa
Mthunzi Lushozi, School of Mechanical, Industrial and Aeronautical Engineering, University of Witwatersrand, Johannesburg, South Africa
Gbeminiyi John Oyewole, School of Mechanical, Industrial and Aeronautical Engineering, University of Witwatersrand, Johannesburg, South Africa
Amanda Yenge, Iruka Chijindu Anugwo, and Motheo Meta Tjebane, Faculty of Engineering and the Built Environment, Walter Sisulu University, East London, South Africa
Gift Laolang, Faculty of Engineering and the Built Environment, Walter Sisulu University, East London, South Africa
ID 402 Research and Innovation Ecosystem for Sustainable Development
Vennan Sibanda and Eriyeti Murena, Department of Industrial and Manufacturing Engineering, National University of Science and Technology Zimbabwe
Saziso Ndlovu, Department of Innovation and Business Development, National University of Science and Technology, Zimbabwe
Hlumela Zungu, Department of Construction Management & Quantity Surveying, Durban University of Technology, Durban, South Africa
ID 404 Exploration of Green Ergonomics Utilising the System Dynamics Approach with the Lenses of 5.0
Carol Dineo Diale-Makgetla, Senior Lecturer, Industrial and Organisational Psychology, College of Economic and Management Sciences University of South Africa, Tshwane, South Africa
Hartmut Von der Ohe, Associate Professor, Department of Industrial Psychology, University of South Africa, Pretoria, South Africa
Victor Aladesanmi, Post Doctoral Fellow, Department of Industrial Psychology, University of South Africa, Pretoria, South Africa
ID 426 Exploring the utilization of biodegradable polymers in additive manufacturing products
Kudzai Mudada, Industrial Engineering, Faculty of Engineering, Stellenbosch University, Stellenbosch, South Africa
Stephen Matope, Professor: Advanced Manufacturing Engineering, Industrial Engineering Department, Faculty of Engineering, Stellenbosch University, Stellenbosch, South Africa
Sorrapong Charoenkittayawut and Natdanai Chanlawong, School of Industrial Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima, Thailand
Gift Laolang, Faculty of Engineering, Built Environment & Information Technology, Walter Sisulu University, East London, Eastern Cape
Motheo Meta Tjebane, Faculty of Engineering and the Built Environment, Durban University of Technology, Durban, KwaZulu-Natal, South Africa
ID 437 AI-Driven Supply Chain Optimization: Evidence from Digital Logistics Operations
Abdullah Sheikh, Sadath Ali Syed and Abdullah Sheikh, Department of Marketing, Raj Soin College of Business, Wright State University, Dayton, OH 45435, USA
Sadath Ali Syed, Department of Engineering, Drew Hall, McNeese State University, 4205 Ryan St, Lake Charles, Louisiana, 70609, USA
Viwe Anda Mngambi, Siphiwe Gogo and Innocent Musonda, Center of Applied Research and Innovation in the Built Environment, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa
Elelwani Beauty Ndou, Department of Industrial Engineering and Engineering Management, University of South Africa
Kemlall Ramdass, Department of Industrial Engineering and Engineering Management, University of South Africa
Kgabo Mokgohloa, Department of Industrial Engineering and Engineering Management ,University of South Africa, Johannesburg, South Africa
Kajingulo Malandala, Department of Industrial Engineering and Engineering Management, University of South Africa
Elelwani Beauty Ndou, Department of Industrial Engineering and Engineering Management, University of South Africa
Kemlall Ramdass, Department of Industrial Engineering and Engineering Management, University of South Africa
Kgabo Mokgohloa, Department of Industrial Engineering and Engineering Management ,University of South Africa, Johannesburg, South Africa
Kajingulo Malandala, Department of Industrial Engineering and Engineering Management, University of South Africa
ID 462 Two-Line Shrink Aperture Resolution Affected by Primary Spherical Aberration
Krishnaiah G, Research Scholar, BEST Innovation University, Gorantla, Assistant Professor of Physics, MALD GDC Gadwal, Jogulamba Gadwal-dist., Telangana, India
Amaranath M, Research Scholar, BEST Innovation University, Gorantla, Asst. Professor, Department of Physics, Annamacharya Institute of Technology and Sciences, Hyderabad, Telangana, India
Mallesh Mudraboina, Assistant Professor, Department of Physics, Annamacharya Institute of Technology and Sciences, Hyderabad, Telangana, India
Ram Prasad T, Assistant Professor, Department of Physics, St. Peters Engineering College,, Hyderabad, Telangana, India.
Kiran Kumar T, Assistant Professor, Department of Physics, Brilliant Institute of Engineering and Technology, Hyderabad, Telangana, India