Proceedings – IMEOM 2020
ISSN 2691-7734 (print)
ISSN 2691-7726 (online)
ISBN: 978-1-7923-9166-8
The 3rd International Conference on Industrial & Mechanical Engineering and Operations Management (IMEOM), Dhaka, Bangladesh, December 26-27, 2020, Organized by IEOM Society of Bangladesh
Citation should be written as:Author(s) Last Name, Author(s) First Name Initial(s), ‘Title of paper”, Proceedings of the Third International Conference on Industrial & Mechanical Engineering and Operations Management (IMEOM), Dhaka, Bangladesh, December 26-27, 2020, pp XX-XX.
Papers and Abstracts
ID 152 Analytical Solution of a Prestressing Strand Subjected to Axial Strain
Yusuf Aytaç Onur, Department of Mechanical Engineering, Zonguldak Bulent Ecevit University, Zonguldak, Turkey
Abdullah Tombak, Department of Motor Vehicles and Transport Technologies, Zonguldak Bulent Ecevit University, Zonguldak, Turkey
Nafiz Afsan, Md. Abdul Aziz, and A.R.M. Harunur Rashid, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
Md. Raisul Islam Atik, Md Asif Ahmed, Md. Samawat Ahsan Mashiyat and A.R.M. Harunur Rashid, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
ID 242 Literature Review on LCA of LPG as a Transportation and Cooking Fuel
Fahim Shahrier,Ishrat Jahan Eva,Afrin Mahi,Chowdhury Sadid Alam, and A.R.M. Harunur Rashid, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
Marvin I. Noroña and Annabelle R. Laureta, School of Industrial Engineering and Engineering Management, Mapua University, Philippines
Joachim Victor V. Nepomuceno, Mac Manroe L. Leonador and Marvin I. Noroña, School of Industrial Engineering and Engineering Management, Mapua University, Manila, 658 Muralla St., Intramuros, Manila 1002, Philippines
Md Mazharul Habib, Michele Cano, Evi Viza and Andisheh Bakhshi, School of Computing Engineering and Physical Sciences (CEPS), University of the West of Scotland (UWS), Paisley, UK
ID 129 Corporate Rating Model using Threshold Optimization and XGBoost
Anda Zhang, Department of Industrial Engineering and Management, Graduate School of Engineering, Kanagawa University, Kanagawa, Japan
Hirohisa Hirai, Department of Industrial Engineering and Management, Faculty of Engineering, Kanagawa University, Kanagawa, Japan
Masanobu Matsumaru, Research Institute for Engineering, Kanagawa University, Kanagawa, Japan
Hideki Katagiri, Department of Industrial Engineering and Management, Faculty of Engineering, Kanagawa University, Kanagawa, Japan
Enamul Hasan Rozin, Hasib Ahmed Prince, Emdadul Haque Chowdhury and Sumon Saha, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh
ID 140 A Mathematical Model to Investigate the Frequent Impact of Global Warming on Coastal Lives
Sajib Mandal, Department of Mathematics, Bangabandhu Sheikh Mujibur Rahman Science and Technology University, Gopalganj-8100, Bangladesh
Md. Sirajul Islam, and Sonia Akter, Department of Mathematics, Bangabandhu Sheikh Mujibur Rahman Science and Technology University, Gopalganj-8100, Bangladesh
Md. Haider Ali Biswa, Mathematics Discipline, Science Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh
ID 144 Impact of COVID-19 Pandemic on Plastic Grocery Bag Supply Chain, Usage, and Long-Term Effects
Astrid Jouret, Hannah Carlile, Jack Maughan, Madeleine Schmidhauser, Michael Wu and Mohamed Awwad, Industrial and Manufacturing Engineering Department, California Polytechnic State University, San Luis Obispo, CA 93407, United States
ID 145 Review of the Effect of COVID-19 on the American Semiconductor Industry Supply Chain
Corey Rumbaugh, Jacob Hrbek, Malia Hickey, Natali Markowitz, Trevor Howell and Mohamed Awwad, Industrial and Manufacturing Engineering Department, California Polytechnic State University , San Luis Obispo, CA 93407, USA
ID 151 Automated Bread Maker: Implementing Techniques of Product Design Process
Shahriar Tanvir Alam, Lecturer, Department of Industrial and Production Engineering, Military Institute of Science and Technology, Mirpur Cantonment, Dhaka-1216, Bangladesh
ID 152 Analytical Solution of a Prestressing Strand Subjected to Axial Strain
Yusuf Aytaç Onur, Department of Mechanical Engineering, Zonguldak Bulent Ecevit University, Zonguldak, Turkey
Abdullah Tombak, Department of Motor Vehicles and Transport Technologies, Zonguldak Bulent Ecevit University, Zonguldak, Turkey
ID 153 Increased Reshoring Efforts in Response to Global Emergencies
Michaela Fromm, Emily Johnson, Sascha Keir, Jack Lugo, Tatum Shore and Mohamed Awwad, Industrial and Manufacturing Engineering Department, California Polytechnic State University, San Luis Obispo, CA 93407, USA
ID 154 The Impact of COVID-19 on Food Security and Delivery in the California Central Coast Region
Peter Bishop, Maria Brown, Sean Love, Keven Nieto-Ramirez, Bruno Zac
and Mohamed Awwad, Industrial and Manufacturing Engineering Department, California Polytechnic State University, San Luis Obispo, CA 93407, USA
ID 155 Meat Shortage in the United States: A Review of the Effects of COVID-19 on the Meat Industry
Adriel Campuzano, Cynthia Hueso-Fernandez, Kwan M. Lim, Hernan Rodriguez, Alicia M. Sisco and Mohamed Awwad , Department of Industrial and Manufacturing Engineering, California Polytechnic State University, San Luis Obispo, CA 93407, USA
ID 157 Impact of COVID-19 on Cleaning Supplies
Brandon Yowakim, Jack Ng, Kayla Tsang, Morgan Cameron and Mohamed Awwad, Industrial and Manufacturing Engineering Department, California, Polytechnic State University, San Luis Obispo, CA 93407, USA
Maritess P. Gomez and Marvin I. Noroña, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines
Muhammad Ashiqur Rahman and Hasib Ahmed Prince, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh
ID 163 Numerical Simulation of Laminar Mixed Convection in a Vented Prismatic Room
Rashadul Islam Ritu, Enamul Hasan Rozin, Sumon Saha and Sheikh Mohammad Shavik, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh
ID 165 Mathematical Modeling on Interrelation between Ultraviolet Radiation and Skin Cancer
Tahera Parvin and Md. Haider Ali Biswas, Mathematics Discipline, Science Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh
Joy Bakshi, S M Shaheduzzaman Ayon, and Md. Haider Ali Biswas, Mathematics Discipline, Science Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh
ID 167 Fabrication of Cost-Effective Prosthetic Arm Using Electroencephalography Signal
Shihab Ahmed, Animesh Mitra, Sumon Saha and Md. Afsar Ali, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
Arnab Bhattacharjee, Department of Electrical and Electronics Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
Sk. Suzauddin Yusuf, M.Sc. Student, Department of Mechanical Engineering, Rajshahi University of Engineering and Technology (RUET), Rajshahi-6204, Bangladesh and Mechanical Engineering Department, Nuclear Power Plant Company Bangladesh Limited (NPCBL), Rooppur, Ishwardi, Pabna, Bangladesh
Md. Nurul Islam, Department of Mechanical Engineering, Rajshahi University of Engineering & Technology (RUET), Rajshahi-6204, Bangladesh
Md Washim Akram, Department of Mechanical Engineering, Bangladesh Army University of Science and Technology (BAUST), Saidpur-5310, Bangladesh
Md. Hasan Ali, Department of Industrial and Production Engineering, Bangladesh Army University of Science and Technology (BAUST), Saidpur-5310, Bangladesh
Md. Abubakar Siddique, Department of Industrial and Production Engineering, Bangladesh Army University of Science and Technology (BAUST), Saidpur-5310, Bangladesh
ID 169 Mathematical Assessment for the Dynamical Model of Sexual Violence of Women in Bangladesh
Kazi Nusrat Islam, and Md. Haider Ali Biswas, Mathematics Discipline, Science Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh
Kefayat Tasnim, Ankona Biswas, and Md. Haider Ali Biswas, Mathematics Discipline, Science Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh
Abdullah Nayeem, Syed Ehtashamul Hoque, Abdullah Al Arman Chowdhury, Department of Leather Engineering, Khulna University of Engineering & Technology, Khulna, Bangladesh
Tamanna AkterJui, Boshra Aziz and Sumon Saha, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
ID 173 Finite Element Simulation of Turning Process and Subsequent Route for Optimization
Dibakar Sarker, Shams Abu Alam, Khalid Bin Mosharof and M. Azizur Rahman, Department of Mechanical and Production Engineering (MPE), Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Tasnia Biswas and Afifa Sumaya, Department of Industrial and Production Engineering (IPE), Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
Asif Al Zubayer Swapnil and Mohammad Habibur Rahman, Department of Mechanical Engineering, University of Wisconsin-Milwaukee, Milwaukee, WI, USA
Marvin I. Noroña, Russel Royce A. Cipres, and Jan Karl C. Paglinawan, School of IE-EMG, Mapua University, 658 Muralla St. Intramuros, Manila, Philippines
ID 182 Developing an Omni-Channel Strategy for Social Enterprises in the Philippines
Marvin I. Noroña, Janine Paula M. Tabar, and Ma. Theresa Angelie P. Eugenio, School of Industrial Engineering and Engineering Management, Mapúa University, 658 Muralla St. Intramuros, Manila, Philippines
Khan Anik Islam and Md. Haider Ali Biswas, Mathematics Discipline, Science Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh
ID 184 Modeling and Analysis of the Dynamic Progress of Chronic Lung Cancer Due to Smoking
Jobayer Ahmed and Md. Haider Ali Biswas, Mathematics Discipline, Science, Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh
ID 185 Optimal Control Strategies for Reducing Dengue Virus Infection in Bangladesh
Kazi Tahmid Belal and Md. Haider Ali Biswas, Mathematics Discipline, Science, Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh
Mohammad Iqbal, Faysol Siddique and Dipika Biswas, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet-3114, Bangladesh
Md. Hasan Ali, Department of Industrial and Production Engineering, Bangladesh Army University of Science and Technology, Saidpur-5310, Bangladesh
Sk. Suzauddin Yusuf, Mechanical Engineering Department, Nuclear Power Plant Company Bangladesh Limited, Rooppur, Ishwardi, Pabna, Bangladesh
Md. Washim Akram,Department of Mechanical Engineering, Bangladesh Army University of Science and Technology, Saidpur-5310, Bangladesh
Tanveer Mahmud Silva, Undergraduate Student, Department of Industrial and Production Engineering, Bangladesh Army University of Science and Technology, Saidpur-5310, Bangladesh
ID 198 Service Development Strategy Using QFD For Customer Satisfaction In A Bank
Chowdury M. Luthfur Rahman, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
Md. Sagar Islam Khan, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
Md. Jehad Islam, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
Sheikh Nova, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
ID 200 Forecasting Rainfall of Monsoon Season with Artificial Neural Network
Noor-E-Zannat, Raju Mondal and Munnujahan Ara, Mathematics Discipline, Science Engineering and Technology School, Khulna University, Khulna-9208, Bangladesh
A.S.M Redwan Haider, Tamzeed Ahmed Alvy and Sajjad Mahmud Shourav, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), OIC, Gazipur, Bangladesh
Md Tawhid Aziz, SkTahmid Shahriar, F.M. Farhan Faiyaz, AseerNehalul Islam and A.R.M. Harunur Rashid, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
Nafiz Afsan, Md. Abdul Aziz and A.R.M. Harunur Rashid, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
Ahmad F.A. Md. Hezam, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
Abrar Sobhan Chowdhury, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
Muhammad Waqas, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
ID 217 Manufacturing Processes of Solution-processed Organic Solar cells and Recent Advances
Mashrur Muntasir Nuhash, Ibthisum Alam, and Aseer Nehal-ul Islam, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
ID 222 Transportation Cost Minimization using Transportation Method by optimizing Job Assignment
S.M. Samiul Bashir Shihab and Fahim Shahrier, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
Md. Raisul Islam Atik, Md Asif Ahmed, Md. Samawat Ahsan Mashiyat and A.R.M. Harunur Rashid, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
Muhammad Ahmed Kalwar, Post Graduate Alumini (MUET) & Assistant Manager Production, Shafi Private Limited, Lahore, Punjab, Pakistan
Shakeel Ahmed Shaikh, Associate Professor & Co-director (Post Graduate Studies), Department of Industrial Engineering & Management, Mehran UET, Jamshoro, 76062, Sindh, Pakistan
Muhammad Ali Khan, Post Graduate Student & Assistant Professor, Department of Industrial Engineering & Management, Mehran UET, Jamshoro, 76062,Sindh, Pakistan
Tanveer Sarwar Malik, Executive Officer (Planning & Costing), Starlet Shoes Private Limited, Lahore, Punjab, Pakistan
K.B.M. Sharif Mahmood, A.M. Imrul Hasan, Shahrin Iqbal, Sourav Pal and Md Ishfak Tahmid, Department of Electrical and Electronic Engineering, Shahjalal University of Science and Technology (SUST), Sylhet-3114, Bangladesh
ID 241 Optimization Processes & Analysis of Impact on Productivity: A Literature Review
Md. Shihabul Islam, Abid Hassan and A.R.M. Harunur Rashid, Department of Mechanical & Production Engineering (MPE), Islamic University of Technology (IUT), Board Bazar, Gazipur 1704, Dhaka, Bangladesh
ID 242 Literature Review on LCA of LPG as a Transportation and Cooking Fuel
Fahim Shahrier,Ishrat Jahan Eva,Afrin Mahi,Chowdhury Sadid Alam, and A.R.M. Harunur Rashid, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
ID 253 Optimal Site Selection for Solar Farm Using GIS and AHP: A Literature Review
Nabila Tabassum Suprova, MD. Abidur Rahman Zidan, and A.R.M. Harunur Rashid, Department of Mechanical & Production Engineering (MPE), Islamic University of Technology (IUT), Board Bazar, Gazipur 1704, Dhaka, Bangladesh
ID 256 A Review of Trans-critical CO2 refrigeration cycle
A.N.M Nihaj Uddin Shan, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
ID 259 Statisital Analysis of the Impact of Penalties in Driving: A Case Study
Muhammad Ahmed Kalwar, Post Graduate Alumini (MUET) & Assistant Manager Production, Shafi Private Limited, Lahore, Punjab, Pakistan
Shakeel Ahmed Shaikh, Associate Professor & Co-director (Post Graduate Studies), Department of Industrial Engineering & Management, Mehran UET, Jamshoro, 76062, Sindh, Pakistan
Muhammad Ali Khan, Post Graduate Student & Assistant Professor, Department of Industrial Engineering & Management, Mehran UET, Jamshoro, 76062,Sindh, Pakistan
ID 260 Exploring the Potential of Six Sigma in Minimizing the Production Defects
Pawan Kumar, Under Graduate Final Year Student & Assistant Group Leader (Final Year Thesis), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Muhammad Ali Khan,Assistant Professor & PhD Scholar, Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Usama Khursheed Mughal, Under Graduate Final Year Student & Group Leader (Final Year Thesis), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Suneel Kumar, Under Graduate Final Year Student & Group Member (Final Year Thesis), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
ID 261 Review of Lean Tool of Total Productive Maintenance (TPM) in Manufacturing Sector
Shahryar Irfan Virk, Under Graduate Final Year Student & Assistant Group Leader (Final Year Thesis), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Muhammad Ali Khan, Assistant Professor & PhD Scholar, Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Tahir Hussain Lakho, Under Graduate Final Year Student & Group Leader (Final Year Thesis), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Aamir Ali Indher, Under Graduate Final Year Student & Group Member (Final Year Thesis), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
ID 263 Internal dry cutting tool
Mohammad Sadeq, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur,Dhaka, Bangladesh
Hameedullah, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
Yaya Ousmanu, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh