Proceedings – 2019 IEOM Bangkok
ISBN: 978-1-5323-5948-4 ISSN: 2169-8767
ID 011 Anaerobic Digestion of Kitchen and Sewage Sludge Bio waste to Biogas using Engineered Bio catalysis
M. M. Manyuchi, BioEnergy and Environmental Technology Centre, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Department of Chemical and Processing Engineering, Faculty of Engineering, Manicaland State University of Applied Sciences, Zimbabwe
C. Mbohwa, BioEnergy and Environmental Technology Centre, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
M. Mpeta, Department of Environmental Engineering, Faculty of Engineering, Chinhoyi University of Technology, Zimbabwe
E. Muzenda, BioEnergy and Environmental Technology Centre, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Department of Chemical, Materials and Metallurgical Engineering, Faculty of Engineering and Technology, Botswana International University of Science and Technology, P Bag 16, Palapye, Botswana
ID 012 Operations improvement in a manufacturing business of make-to-order special vehicles
Inês Azevedo, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, s/n 4200-465 Porto, Portugal
Vera L. Migueis and Americo Azevedo, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, s/n 4200-465 Porto, Portugal
INESC TEC, Rua Dr. Roberto Frias, Campus da FEUP, 4200-465 Porto, Portugal
ID 013 Methane Generation from Landfill Waste as a Resource Recovery Strategy
Mercy Manyuchi, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Department of Chemical and Processing Engineering, Faculty of Engineering, Manicaland State University of Applied Sciences, Zimbabwe
C. Mbohwa, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
M. Mpeta, Department of Environmental Engineering, Faculty of Engineering, Chinhoyi University of Technology, Zimbabwe
E. Muzenda, Department of Chemical Engineering and Technology, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Department of Chemical, Materials and Metallurgical Engineering, Faculty of Engineering and Technology, Botswana International University of Science and Technology, P Bag 16, Palapye, Botswana
ID 014 Environmental Impacts for Setting up a Waste to Energy Landfill Site
M. M. Manyuchi, BioEnergy and Environmental Technology Centre, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Department of Chemical and Processing Engineering, Faculty of Engineering, Manicaland State University of Applied Sciences, Zimbabwe
C. Mbohwa, BioEnergy and Environmental Technology Centre, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
M. Mpeta, Department of Environmental Engineering, Faculty of Engineering, Chinhoyi University of Technology, Zimbabwe
E. Muzenda, BioEnergy and Environmental Technology Centre, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Department of Chemical, Materials and Metallurgical Engineering, Faculty of Engineering and Technology, Botswana International University of Science and Technology, P Bag 16, Palapye, Botswana
ID 015 Projector Nonlinear Gamma Effect Reduction for Fringe Projection
Dr. Javier Cruz Salgado, Technology Development Department, Universidad Politécnica del Bicentenario, Silao Guanajuato, 36283, México
ID 020 Integrated Quality Environmental Management Practices and its Impact on Operational and Environmental Performances in Food Processing SMEs
Jamaludin K.R., Hayati Habibah Abdul Talib & Syed Ali Raza Shah, Razak Faculty of Technology and Informatics, Universiti Teknologi Malaysia, Jalan Sultan, Yahya Petra, 54100 Kuala Lumpur, Malaysia
ID 021 Contractors Perception towards Excavation Hazard
Clinton Aigbavbao, Sustainable Human Settlement and Construction Research Centre, Department of Construction Management & Quantity Surveying, University of Johannesburg, Doornfontein Campus, Johannesburg, 2028, South Africa
Zakari Mustapha, School of Engineering, Department of Building Technology, Cape Coast Technical University, Cape Coast, Ghana
Wellington Didi Thwala, Sustainable Human Settlement and Construction Research Centre, Department of Construction Management & Quantity Surveying, University of Johannesburg, Doornfontein Campus, Johannesburg, 2028, South Africa
ID 022 Major Excavation Hazard in Cape Coast Metropolis
Wellington Didi Thwala, Sustainable Human Settlement and Construction Research Centre, Department of Construction Management & Quantity Surveying, University of Johannesburg, Doornfontein Campus, Johannesburg, 2028, South Africa
Zakari Mustapha, School of Engineering, Department of Building Technology, Cape Coast Technical University,
Cape Coast, Ghana
Clinton Aigbavbao, Sustainable Human Settlement and Construction Research Centre, Department of Construction Management & Quantity Surveying, University of Johannesburg, Doornfontein Campus, Johannesburg, 2028, South Africa
ID 023 Contractors Perception towards Excavation Hazard
Clinton Aigbavbao and Wellington Didi Thwala, Sustainable Human Settlement and Construction Research Centre, Department of Construction Management & Quantity Surveying, University of Johannesburg, Doornfontein Campus, Johannesburg, 2028, South Africa
Zakari Mustapha, School of Engineering, Department of Building Technology, Cape Coast Technical University, Cape Coast, Ghana
ID 024 Major Excavation Hazard in Cape Coast Metropolis
Clinton Aigbavbao and Wellington Didi Thwala, Sustainable Human Settlement and Construction Research Centre, Department of Construction Management & Quantity Surveying, University of Johannesburg, Doornfontein Campus, Johannesburg, 2028, South Africa
Zakari Mustapha, School of Engineering, Department of Building Technology, Cape Coast Technical University, Cape Coast, Ghana
ID 025 Conceptual Framework to Estimate Continuous Improvement Project Success in Hospitals
Fernando Gonzalez-Aleu, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, NL 66238, Mexico
Eileen M. Van Aken, Grado Department of Industrial and Systems Engineering, Virginia Tech, Blacksburg, VA 24061, USA
Jennifer Cross, Department of Industrial Engineering, Texas Tech University, Lubbock, TX 79409-3061, USA
Wiljeana Glover, Schlesinger Fund for Global Healthcare Entrepreneurship, Babson College, Babson Park, MA 02457-0310, USA
ID 026 Process Standardization: Process Improvement in the Inbound Logistics Department of An Aquaculture Manufacturing Firm
John Paolo Isip, La Consolacion University Philippines, Philippines
Hazel Caparas, Bulacan State University, Philippines
ID 027 Ethical Leaderships and Organizational Culture of Student Organization at Indonesian Private University
Mahendra Fakhri, Mahir Pradana and Dita Puri Utami, Telkom University, Jalan Terusan Buah Batu, Bandung, 40257, Indonesia
ID 028 Degradation of Water Hyacinth (Eichhornia Crassipes) to Vermicompost through Application of the Vermicomposting Technology
Mercy M. Manyuchi and Charles. Mbohwa, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Edison. Muzenda, Department of Chemical Engineering Technology, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Department of Chemical, Materials and Metallurgical Engineering, Faculty of Engineering and Technology, Botswana International University of Science and Technology, P Bag 16, Palapye, Botswana
Trevor. N. Mutusva, Department of Mathematical Sciences, School of Industrial Sciences and Technology, Harare Institute of Technology, Zimbabwe
Miranda Mpeta, Department of Environmental Engineering, Faculty of Engineering, Chinhoyi University of Technology, Zimbabwe
ID 029 The Application of Lean Manufacturing to Reduce Setup Time of a Printing Process
Kasarin Chivatxaranukul, Aeronautic Engineering, Vincent Mary School of Engineering, Assumption University, Thailand
ID 030 Combination of Tolerances of False Causes of Failure in Neuro psychotics Structures of the prediction for the Reliability of Refurbished Systems
Fereidoun Heidari Takabi, Maintenance and methods Department, South pars gas complex, Asaluye, Iran
ID 031 Vision Guided Robotics Research Study
Annamalai Pandian and Kyle Bruce, Mechanical Engineering Department, Saginaw Valley State University, University Center, MI 48710, USA
ID 032 An Improved Malaysian Automotive Industry Resin Supply Chain Framework
Rosdan Bin Rosman and Sha’ri Mohd. Yusof, Razak Faculty of Technology & Informatics, Universiti Teknologi Malaysia, Jalan Semarak, Malaysia
ID 033 Customer Churn Prediction Using a New Criterion and Data Mining; A Case Study of Iranian Banking Industry
Davoud Gholamiangonabadi and Jamal Shahrabi, Department of Industrial Engineering and Management Systems, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
Seyed Mohamad Hosseinioun, Industrial and Systems Engineering Department, Northern Illinois University, Chicago, USA
Sanaz Nakhodchi, Department of Computer Engineering, Iran University of Science and Technology, Tehran, Iran
Soma Gholamveisy, Department of Industrial Engineering, Islamic Azad University (South Tehran Branch), Tehran, Iran
ID 034 A Study of the Owners Related Factors affecting the Performance of Tertiary Educational Building (TEB) Projects
Adedokun and Olufisayo Adewumi, Department of Quantity Surveying, School of Environmental Technology, Federal University of Technology, Akure, Nigeria
ID 039 Reasoning Types in An Industrial Engineering/Operations Management
Muhittin Oral, Graduate School of Business, Özyeğin University, Istanbul, Turkey
Ossama Kettani, Modellium, Inc., Centre Ville, Québec City, Canada
ID 040 Device Design For SAE 1020 Steel Tool Storage Applied To Automotive Industry
Marcílio Antunes Leite Filho, Rosinei Batista Ribeiro, Adriano José Sorbile de Souza, José Wilson de Jesus Silva and Wellington de Oliveira, Post-Graduation Program in Design, Technology and Innovation, Lorena, UNIFATEA, Brazil
ID 041 Mining Waste Management for Sustainable Mining Practices
M. M. Manyuchi and C. Mbohwa, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
E. Muzenda, Department of Chemical Engineering Technology, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Department of Chemical, Materials and Metallurgical Engineering, Faculty of Engineering and Technology, Botswana International University of Science and Technology, P Bag 16, Palapye, Botswana
ID 050 Importance of Traceability, quality and safe food for good health of human
Khan Mohammad Elyas and Agriculturist Ripon Kumar Ghose
ID 056 A Quality Control-Based In-process Artificial Neural Network Surface Roughness Prediction System
PoTsang B. Huang, Department of Industrial and Systems Engineering, Chung Yuan Christian University, Taoyuan City, Taiwan
Josephine D. German, Rodalyn O. Mabanag, and Gabrielle Quirino, Department of Industrial Engineering and Service Engineering Management, Mapua Institute of Technology, Manila
ID 061 Time Estimation for Container Handling and Yard Arrangement
Etsuko Nishimura, Graduate School of Maritime Sciences, Kobe University, 5-1-1 Fukae-minami, Higashinada, Kobe 658-0022, JAPAN
ID 062 Application of Hyperbinomial Distribution in Developing a Modified p-chart
Shourav Ahmed, Gulam Kibria and Kais Zaman, Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
ID 063 Modelling for Hospital Rating Improvements on peer review sites considering region specific factors
Mayukh Saha, Dr. Jitendra Kumar Jha and Dr. J Maiti, Department of Industrial & Systems Engineering, Indian Institute of Technology, Kharagpur, 721302, India
ID 064 Potential to use Bio char in Mercury Removal from Gold Mining Tailings Wastewater
M. M. Manyuchi and C. Mbohwa, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
E. Muzenda, Department of Chemical Engineering Technology, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Department of Chemical, Materials and Metallurgical Engineering, Faculty of Engineering and Technology, Botswana International University of Science and Technology, P Bag 16, Palapye, Botswana
ID 065 Process of Recovering Diesel from Waste Plastics: A Review
Ignatio Madanhire, Simon Chinguwa and Nyahunda Liberty, Department of Mechanical Engineering, University of Zimbabwe, P.O Box MP167, Mount Pleasant, Harare, Zimbabwe
Charles Mbohwa, Department of Quality Management and Operations Management, University of Johannesburg, P. O. Box 524, Auckland Park 2006, Johannesburg, South Africa
ID 066 E-Waste Recycling to Recover Base and Precious Metals
Ignatio Madanhire and Liberty Nyahunda, Department of Mechanical Engineering, University of Zimbabwe, P.O Box MP167, Mount Pleasant, Harare, Zimbabwe
Simon Chinguwa and Charles Mbohwa, Department of Quality Management and Operations Management, University of Johannesburg, P. O. Box 524, Auckland Park 2006, Johannesburg, South Africa
ID 067 Development of Mechanical Solar Tracker Design
Ignatio Madanhire, Tauyanashe Chikuku and Liberty Nyahunda, Department of Mechanical Engineering, University of Zimbabwe, P.O Box MP167, Mount Pleasant, Harare, Zimbabwe
Charles Mbohwa, Department of Quality Management and Operations Management, University of Johannesburg, P. O. Box 524, Auckland Park 2006, Johannesburg, South Africa
ID 068 Models and Metaheuristics for the Pollution Traveling Salesman Problem
Paolo Toth, Valentina Cacchiani and Carlos Contreras-Bolton, DEI, University of Bologna, Viale Risorgimento 2, 40136 Bologna, Italy
John W. Escobar, Pontificia Universidad Javeriana, Cl. 18 #118-250, Cali, Colombia
Luis M. Escobar-Falcon, Technological University of Pereira, Cl. 27 #10-02 Barrio A´ lamos, Pereira, Colombia
Rodrigo Linfati, University of Bio Bio, Av. Collao 1202, Concepcion, Chile
ID 069 A Risk Management Based Econometric Modelling of Insurance Underwriting in Engineering Projects
Engr. Ronwaldo J. Reyes and Marvin I. Noroña, School of Industrial Engineering and Engineering Management, Mapua University, 658 Muralla Street, Intramuros, Manila, Philippines
ID 070 Customer visit segmentation in an online retail market
Partha Sarathi Mishra and Dr. Jitendra Kumar Jha, Department of Industrial and Systems Engineering, Indian Institute of Technology, Kharagpur, 721302, India
ID 071 A Dual Approach to the Harmonized Model between Inventory Reduction and Heijyunka (Production Leveling) Based on the Minimum Average-Energy Principle
Tsuyoshi Kurihara, Certified and Accredited Meteorologist, Hiroshima, Japan
Takaaki Kawanaka, Institute for Innovation in International Engineering Education, Graduate School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, Japan
Hiroshi Yamashita, Department of Commerce, Meiji University, 1-1 Kanda-Surugadai, Chiyoda-ku, Tokyo, Japan
ID 072 Ranking of the Factors for Resilient Humanitarian Supply Chain: A TOPSIS Approach
Rajesh Kr Singh, Management Development Institute, Gurgaon, India
Ayush Gupta, Production and Quantitative Methods Area, Indian Institute of Management Ahmedabad, Ahmedabad, India
ID 073 Virtual DNA (V-DNA) Applications: A Systematic Literature Review
Alaa M. Ubaid and Fikri T. Dweiri, College of Engineering, University of Sharjah, University City, Sharjah, UAE
ID 074 Including Containers with Dangerous Goods in the Slot Planning Problem
Kiros Gebrearegawi Kebedow, School of Mathematical and Statistical Sciences, Hawassa University, Hawassa, Ethiopia
Johan Oppen, Molde University College, Specialized University in Logistics, Molde, Norway
ID 075 Excellent Performance Realization Methodologies (EPRMs): Elements and Framework
Alaa M. Ubaid and Fikri T. Dweiri, College of Engineering, University of Sharjah, University City, Sharjah, UAE
ID 076 An Employee Retention Model for Millennials in the Philippine Telco Industry
John Jerjie C. Reyes and Marvin I. Norona, School of Industrial Engineering and Engineering Management, Mapua University, Manila City, Philippines
ID 078 Heuristic Approaches for Optimizing Multi-echelon Multi-facility Green Reverse Logistics Network Design
K Nageswara Reddy, Akhilesh Kumar, Department of Industrial and Systems engineering, Indian Institute of Technology, Kharagpur, West Bengal, India, 721302
ID 079 Work-related psychosocial factors associated with lower back pain among male handicraft workers in Jaipur, India
Dipayan Das, Awadhesh Kumar and Monica Sharma, Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur, Rajasthan, India
ID 080 The Improvement of Healthcare Management in Thailand via IE Tools: A Survey
Chawis Boonmee and Chompoonoot Kasemset, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, Thailand
ID 081 Collision Probability Analysis in a Parallel Machines Model When the Number of Jobs Is Constrained
Taiki Otsuka and Eishi Chiba, Department of Industrial and Systems Engineering, Hosei University, 3-7-2 Kajino-cho, Koganei-shi, Tokyo, 184-8584 Japan
ID 082 A Conceptual Framework Of Multi Objective Optimization For International Perishable Food Supply Chain Under Stochastic Demand And Fuzzy Deterioration Rate
Samatthachai Yamsa-ard, Department of Research, NEOMA Business School, Mont Saint Aignan, 76130, France
Fouad Ben Abdelaziz, Department of Information systems, Supply chain management and Decision-making, NEOMA Business School, Mont Saint Aignan, 76130, France
ID 083 A Three Stage DEA Approach for Evaluating the Performance of Supply Chains: Case Study of Public Pharmaceutical Products Supply chains in Morocco
Zoubida Chorfi and Abdelaziz Berrado, Equipe Analyse, modélisation et intégration des processus et systèmes (EAMIPS), Ecole Mohammadia d’Ingénieurs, Mohammed V University of Rabat, Morocco
Loubna Benabbou, Département Sciences de la Gestion, Université du Québec à Rimouski (UQAR), Campus de Lévis, Québec, Canada
ID 084 Sustainable Biodegradable Packaging Material: A Solution for Decreasing Available Capacity of Landfills in the Philippines
Juan Miguel N. Dinglasan, Industrial Engineering Department, Technological Institute of the Philippines, Quezon City, Philippines
ID 085 Theoretical Framework to Analyze Conflict between Marketing and Operations Strategy: A Product Life Cycle Perspective
Chitresh Kumar and Anirban Ganguly, Jindal Global Business School, O. P. Jindal Global University, Sonipat, Haryana 131001, India
ID 086 Production Optimization of Small – Sized Sugarcane Farms in the Philippines through Optimal Variety Mix using Compromise Programming
Alec Steven L. Ardan, John Ruther A. Faustino, Mariel Jorinda G. Garcia, Patrick Jerome M. Lacap, Marc Jesm Malapitan, Julius C. Palagam, John Rowe V. Pineda and Romalyn L. Galingan, Department of Industrial Engineering, Technological Institute of the Philippines, Quezon City Philippines
ID 087 Banana Peel for the Decontamination of Mercury in Water
Gerardo Espinosa, Jacobo Tijerina, Natella Antonyan and Imelda Loera, Universidad de Monterrey, San Pedro Garza García, Nuevo León, Mexico
ID 088 Particle Swarm Optimization for Post Box Collection Routing Problem
Warisa Wisittipanich, Excellent Center in Logistics and Supply Chain Management, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand
Kritsada Ananthapanyasut, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand
ID 089 DeepFork: Supervised Prediction of Info Diffusion
Ramya Akula, Niloofar Yousefi and Ivan Garibay, Industrial Engineering and Management Systems, University of Central Florida, syedOrlando, USA
ID 090 Formulation of a Remover to Eliminate Paint in Articles Made of Glass
Gerardo Espinosa and Jacobo Tijerina, Universidad de Monterrey, Mexico
Natella Antonyan and Imelda Loera, Tecnologico de Monterrey, Mexico
ID 091 Critical Success Factors for the implementation of Operational Excellence
Jacobo Tijerina Aguilera and Diego Andrés Martínez Treviño, Extension, Consulting and Research Department, University of Monterrey, Monterrey, Nuevo León 66238, Mexico
ID 092 A classification of transport mode on a smartphone based on a neural network
Taku Tanichi, Advanced Course in Production Systems Engineering, Salesian Polytechnic Machida, Tokyo 194-0215, Japan
Yoichi Shimakawa, Department of Computer Science and Technology, Salesian Polytechnic Machida, Tokyo 194-0215, Japan
ID 093 A study on a routing problem focusing on freight transportations
Tatsuya Komiya, Advanced Course in Production Systems Engineering, Salesian Polytechnic Machida, Tokyo 194-0215, Japan
Yoichi Shimakawa, Department of Computer Science and Technology, Salesian Polytechnic Machida, Tokyo 194-0215, Japan
Hiroyuki Goto, Department of Industrial & System Engineering, Hosei University Tokyo, Japan
ID 094 Assessment of accessibility to a facility using a Geographic Information System: Case study of a food desert problem in a suburban area of Tokyo
Shun Odahara, Advanced Course in Production Systems Engineering, Salesian Polytechnic Machida, Tokyo 194-0215, Japan
Yoichi Shimakawa, Department of Computer Science and Technology, Salesian Polytechnic Machida, Tokyo 194-0215, Japan
ID 095 Risk Exposure and Factor Effect Study of Selected Car Accident Parameters on Accident Severity
Khalid Alzoubi, Department of Industrial Engineering, Jordan University of Science and Technology, P.O. Box 3030, Irbid 22110, Jordan
Sharaf Alkheder, Department of Civil Engineering, Kuwait University, P.O. Box 5969, Safat 13060, Kuwait
ID 096 Advanced preservation policy for deteriorating products during transportation and at retailer within a supply chain
Muhammad Waqas Iqbal and Yuncheol Kang, Department of Industrial Engineering, Hongik University, Seoul, South Korea
ID 097 The Development of the Maturity Model to evaluate the Smart SMEs 4.0 Readiness
Nilubon Chonsawat, Ph.D.’s Degree Program in Industrial Engineering, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand
Apichat Sopadang, Department of Industrial Engineering, Excellent Center in Logistics and Supply Chain Management, Chiang Mai University, Chiang Mai 50200, Thailand
ID 098 Customer Churn Prediction Using a Meta-Classifier Approach; A Case Study of Iranian Banking Industry
Davoud Gholamiangonabadi and Adele Shahi, Department of Industrial Engineering and Management System, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
Sanaz Nakhodchi, Department of Computer Engineering, Iran University of Science and Technology, Tehran, Iran
Ammar Jalalimanesh, Iranian Research Institute for Information Science and Technology (IRANDOC), Tehran, Iran
ID 099 Assessing productivity changes using the bootstrapped Malmquist index: the case study of the Iranian construction industry
Alireza Nabavieh, Kaveh M. Cyrus and Davoud Gholamiangonabadi, Department of Industrial Engineering and Management Systems, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
Soma Gholamveisy, Department of Industrial Engineering, Islamic Azad University (South Tehran Branch), Tehran, Iran
ID 100 Sustainability Framework for Farm Level Cotton Supply Chain Management
Sonia Nazeer and Puwanart Fuggate, School of Logistic and Supply Chain, Naresuan University, Phitsanulok, Thailand
ID 101 Dehydration And Sieving to 150 Microns Process of Melon Seed
Gerardo Espinosa Garza and Jacobo Tijerina Aguilera, Extension, Consulting and Research Division, Universidad de Monterrey, Av. Ignacio Morones Prieto 4500 Pte., San Pedro Garza Garcia, N.L., 66238, Mexico
Natella Antonyan and Imelda Loera Hernandez, Escuela de Ingenieria y Ciencias, Tecnologico de Monterrey, G. Sada 2501, Monterrey, N.L., 64849, Mexico
ID 109 Cost Oriented Failure Consequence Analysis of Machine Components- A Case Study
Pratik Nandanwar and Dr. Pravin P. Tambe, Department of Industrial Engineering, Shri Ramdeobaba College of Engineering & Management, Nagpur, India
ID 110 Managing Production and Sales of Refurbished Products under Capacity Limitations
Mayukh Saha, Vaibhav Agrawal and Dr. Akhilesh Kumar, Department of Industrial and Systems Engineering, Indian Institute of Technology, Kharagpur, West Bengal, India
ID 111 Location model minimizing distances between EV charging stations
Yohei Kakimoto, Graduate School of Science and Engineering, Hosei University, Tokyo, Japan
Hiroyuki Goto, Department of Industrial & System Engineering, Hosei University Tokyo, Japan
Yoichi Shimakawa, Department of Computer Science and Technology, Salesian Polytechnic Machida, Tokyo, Japan
Prommas Panote, Graduate School of Science and Engineering, Hosei University, Tokyo, Japan
ID 112 Fleet management through Vehicle Routing Problem and Multi Depot Vehicle Scheduling Problem: A Literature Review
Ziyad bahou, Equipe MOAD6, Mohammadia School of Engineers, Mohammed V University of Rabat, Morocco
Jamal Elhachmi, Laboratory of Electronics and Telecommunications, Mohammadia School of Engineers (EMI), Rabat, Morocco
ID 113 Decrease Scrap of Railroader Axle on Carajás Railroad
Francisco das Chagas Barbosa Nascimento, Reliableness of Wagon Maintenance Management, Carajás Railroad to VALE S.A., Av. dos Portugueses, S/N Anjo da Guarda, CEP 65085 580 São Luís, MA – Brasil
Gerisval Pessoa, North Carrier Capacity and Operational Process of Management, Executive Management of Maintenance Engineering EFC VALE S.A., Av. dos Portugueses, S/N Itaqui, CEP 65085 580 São Luís, MA – Brasil
ID 114 Success Factors for ERP Implementation: a Systematic Literature Review
Mohamed-Iliasse Mahraz and Abdelaziz Berrado, Département Génie industriel, Ecole Mohammadia d’Ingénieurs, Mohammed V University of Rabat, Loubna Benabbou, Département Sciences de la Gestion, Université du Québec à, Rimouski (UQAR) Campus de Lévis, Québec Morocco
ID 115 Optimisation of Distribution System in the Retail Industry: An Australian Retail Industry
Mohammad Amjad, Faculty of Engineering and Information Technology, University of Technology Sydney, NSW 2007, Australia
Jay Daniel, Derby Business School, University of Derby, Derby, DE22 1GB, UK
Jose Arturo Garza-Reyes, Centre for Supply Chain Improvement, University of Derby, Derby, DE22 1GB, UK
ID 117 Redesign of the Raw Material Collection System for the Reduction of the Integrated Total Costs by Ton in a Steel Company
Carlos Perez Sandi Treviño and Luis Enrique Orozco Rubio, Engineering and Technologies Department, University of Monterrey, San Pedro Garza García, NL 66238, México
Jenny Díaz Ramírez, Engineering and Technologies Department, University of Monterrey, Nuevo León, México
ID 119 A Drivers’ Performance Assessment Model Based on Fuel Economy Measurements
Jenny Díaz Ramírez, Department of Engineering, Universidad de Monterrey, Monterrey, N.L. 66238, Mexico
José Ignacio Huertas, Energy and Climate Change Research Group, School of Engineering and Science, Tecnologico de Monterrrey, Monterrey, N.L., 68849, México
ID 120 Aerospace Industry in Queretaro, Mexico: A perspective of Regional Innovation System
Christian Muñoz-Sanchez, María del Rocio Soto-Flores and Luis Rocha-Lona, Business School, National Polytechnic Institute of Mexico, Mexico City, Mexico
Jose Arturo Garza-Reyes, Centre for Supply Chain Improvement, The University of Derby, Derby, UK
ID 121 A Literature Review and Further Research Direction in Cross-docking
Dollaya Buakum, Graduate Program in Industrial Engineering, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand
Warisa Wisittipanich, Excellent Center in Logistics and Supply Chain Management, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand
ID 122 A methodology for combined maintenance decision with quality control and production scheduling for multi machine system
Dr. Pravin P. Tambe, Department of Industrial Engineering, Shri Ramdeobaba College of Engineering & Management, Nagpur, India
Dr. Makarand S. Kulkarni, Department of Mechanical Engineering, Indian Institute of Technology Bombay, Powai, Mumbai, India
ID 123 Study on the Classification of Network
Shoichi Kaneko, Faculty of Management Information, Yamanashi Gakuin University, 2-4-5 Sakaori, Kofu city, Yamanashi, Japan
Takaaki Kawanaka, Institute for Innovation in International Engineering Education, Graduate School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, Japan
Nyunho Jung, Faculty of Business, Aichi Shukutoku University, 23, Sakuragaoka, Chikusa-ku, Nagoya-city, Aichi Prefecture, Japan
Hiroshi Yamashita, Department of Commerce, Meiji University, 1-1 Kanda-Surugadai, Chiyoda-ku, Tokyo, Japan
Masanobu Matsumaru, Mechanical and Industrial Engineering Department, Kanagawa University, Kanagawa, Japan
ID 132 A Study of the Design for Trolley School Bag of Elementary Children in Grades 1-3 Using the NIOSH Lifting Equation
Christian T. Chua, Glyda A. Marquez and Tyrine B. Mendez, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Janina Elyse A. Reyes, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
ID 133 A Study of the Design for Trolley School Bag of Elementary Children in Grades 1-3 Using the National Institute for Occupational Safety and Health (NIOSH) Lifting Equation
Christian T. Chua, Glyda A. Marquez and Tyrine B. Mendez, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Janina Elyse A. Reyes, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
ID 134 Hypothesis Combination using Genetic Algorithm
Kuan-Yu Lai, Jhin-Wun Wang and Chien-Liang Liu, Department of Industrial Engineering and Management, National Chiao Tung University, 1001 University Road, Hsinchu, Taiwan 300, ROC
ID 135 Multiperiod Reliable Uncapacitated Facility Location Problem
Megha Sharma and Sumanta Basu, Operations Management Group, Indian Institute of Management Calcutta, Kolkata, India
Arnab Adhikari, Operations Management Department, Indian Institute of Management Ranchi, Ranchi, India
ID 136 Proposal of k-principal points for Binary Data by Introducing a Dendrogram
Sunhee Kwon, Graduate School of Business Administration, Meiji University, Tokyo, Japan
Takaaki Kawanaka, Institute for Innovation in International Engineering Education, Graduate School of Engineering, The University of Tokyo, Tokyo, Japan
Hiroshi Yamashita, Department of Commerce, Meiji University, 1-1 Kanda-Surugadai, Chiyoda-ku, Tokyo, Japan
ID 137 Factors Affecting the Performance of Cold Chain for Export of Thailand’s Longan
Narathip Titlo, Graduate program in Logistics Engineering and Supply chain Management, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, Thailand
Apichat Sopadang, Department of Industrial Engineering, Excellence Center in Logistics and Supply Chain Management, Chiang Mai University, Chiang Mai, Thailand
ID 138 Review on Heat Transfer Enhancement in Car Radiator Using Nano Fluids
Nandkumar Sadashiv Vele, Research Scholar, RSCOE, Savitribai Phule Pune University, Pune, India
Prof (Dr.) R. K. Patil, Principal Government Polytechnic College, Hingoli, Maharashtra State, India
ID 139 Deviation degree between ideal and real of domain transition probability in resource circulation considering production synchronization ratio
Takaaki Kawanaka, Institute for Innovation in International Engineering Education, Graduate School of Engineering, The University of Tokyo, Tokyo, Japan
Hiroshi Yamashita, Department of Commerce, Meiji University, 1-1 Kanda-Surugadai, Chiyoda-ku, Tokyo, Japan
Shoichi Kaneko, Faculty of Management Information, Yamanashi Gakuin University, 2-4-5 Sakaori, Kofu city, Yamanashi, Japan
ID 140 Design and Analysis of Ducted Wind Turbine for Rooftop Installation
Agney Bhakare, Preeti Ranka and Anket Telkapalliwar, B.Tech. in Mechanical Engineering, Veermata Jijabai Technological Institute, Mumbai, 400019, INDIA
Mandar. V. Tendolkar, Assistant Professor, Mechanical Engineering Department, Veermata Jijabai Technological Institute, Mumbai, 400019, INDIA
Sanjay M. G., Associate Professor, Mechanical Engineering Department, Veermata Jijabai Technological Institute, Mumbai, 400019, INDIA
ID 141 How the difference in product characteristics affects the relationship with customers? In the case of the electronics parts industry increasing its focus on the automotive market
Chihiro Sato, Graduate School of Economics and Management, Tohoku University, Kawauchi, 27-1, Aoba-ku, Sendai, Miyagi, Japan
ID 142 Lean Readiness Assessment Model – A Tool for Humanitarian Organizations’ Social and Economic Sustainability
Muhammad Shafiq and Kullapa Soratana, School of Logistics and Supply Chain, Naresuan University, Phitsanulok 65000, Thailand
ID 143 An Investigation of Student Perspective for E-Learning Readiness Measurement
Aulia F. Hadining, Sukanta and Wachid Hidayat, Industrial Engineering Department, State University of Singaperbangsa Karawang, Karawang, Indonesia
ID 144 CSR Strategies and Pricing Decisions of Competitive Firms under Uncertainty Demands
Bo Li, College of management and Economics, Tianjin University, Tianjin, China
Junhong Yang, School of Mechanical Engineering, Tianjin University, Tianjin, China
ID 145 Social Determinants of Health: Global Comparison
Sung-Ho Kim, Ph.D., Adjunct Professor at Yonsei University, Korea
Ik-Whan Kwon, Ph.D., Professor Emeritus, Saint Louis University, U.S.A.
ID 146 Designing Pricing Strategy under Environmental-Friendly Promotion and Competition
Sumanta Basu, Operations Management Group, Indian Institute of Management Calcutta, Kolkata, India
Arnab Adhikari, Operations Management Department, Indian Institute of Management Ranchi, Ranchi, India
ID 147 Throughput Rate Calculation by Cycle Time Modeling for Multi Aisles ASRS Using Timed Petri Nets
Yassine Boudghene Stambouli, MELT laboratory, University of Tlemcen, Algeria
Samir Hamacl, Quartz Laboratory (EA 7393), ECAM-EPMI, Cergy-Pontoise, France
ID 148 A Knowledge Management Approach to Compare and Develop the ASEAN University Credit Transfer System in Thailand
Chayamarnie Bhiriyawanit, College of Arts, Media and Technology, Chiang Mai University, Thailand
ID 149 Collaborative Supply Chain in Auto Service in India
Debabrata Bhattacharjee, Country Head, Indian Oil Corporation Limited, Yangon Branch, Myanmar
ID 150 A Workplace Assessment for Visually Impaired and Blind Massage Therapists of a Massage Therapy Franchise in Metro Manila, Philippines
Noriko Hayashi, Januel Ticsay, Krischael Santos and Janne Paula Villaflor, Department of Industrial Engineering, Technological Institute of the Philippines, Manila, Philippines
ID 151 City Carbon Footprint Adaptation on Green Supply Chain and Logistics of Food Production and Consumption
Kunlatida Yachai, Graduate program in Logistics Engineering and Supply chain Management, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, Thailand
Sate Sampattagul, Department of Industrial Engineering, Center of Excellent on Energy, Economic and Ecological Management (3E), Chiang Mai University, Chiang Mai, Thailand
ID 152 Decontamination of mercury, cadmium and lead
Gerardo Espinosa Garza, Universidad de Monterrey, Monterrey, Nuevo León, México
Pamela Espinosa Alonso, Blanca Nelly Fabela Guardado, Laura Citlali Flores Martínez, Katia Margarita Martínez López and Ana Laura Ochoa Tovar, María Cristina Rendón Lara and Jesús Salvador Sánchez Miñón, Tecnologico de Monterrey, Mexico
ID 153 Green Manufacturing Adoption Framework for Small and Medium Enterprises in Indonesia
Ira Setyaningsih, Universitas Gadjah Mada, UIN Sunan Kalijaga Yogyakarta, Yogyakarta, Indonesia
ID 154 A Markovian Perspective of Airport Departure Process
Ch V Sai Praveen and Mayank Anand, Department of Mechanical Engineering, Indian Institute of Technology, Kharagpur, West Bengal, India
ID 155 Systems Thinking View on Impact of Single Common Tax on Warehousing Industries in India
Priyankshu Mukhopadhya, Shreeya Shahu and Dr. Pravin P. Tambe, Department of Industrial Engineering, Shri Ramdeobaba College of Engineering and Management, Nagpur, Maharashtra 440013, India
ID 156 Mercury, Cadmium and Lead Removal from Contaminated Water by Processed Lemon Peel
Gerardo Espinosa Garza, Alba Victoria Sordo Téllez, Cassandra Ibarra Barreda, Sergio García, Emiliano Garza Belden, Juan José de Isla and Michelle Aggeler Castellanos, Universidad de Monterrey, Nuevo León, Mexico
ID 157 Productivity in the use of beer foam
Gerardo Espinosa Garza, Universidad de Monterrey, Monterrey, Nuevo León, México
ID 158 Mercury, Cadmium and Lead Removal by Processed Orange Peel
Gerardo Espinosa Garza, Armando Chávez Flores, Mauricio Casas Zuñiga, Rodrigo Lozano Lozano, Javier Valdez Alatorre, Kevin Hernández Martínez and Daniel Amarante Portill, Universidad de Monterrey, Monterrey, Nuevo León, México
ID 167 An Efficient Storage Allocation in Warehouse to Minimize Travel Distance of Pickers
Md. Saiful Islam, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology, Khulna-9203, Bangladesh
Md. Kutub Uddin, Department of Mechanical Engineering, Khulna University of Engineering & Technology, Khulna-9203, Bangladesh
ID 168 Implementation of JIT in sewing section of a garment industry in Bangladesh to increase productivity
Israt Parveen, Md. Arif Mia, 1Md. Sujan Ali, Khandoker Rafsun-Ul-Hasan, Md. Moshiur Rahman and Md. Iqbal Mahmud, Department of Textile Engineering, Mawlana Bhashani Science and Technology University, Santosh, Tangail-1902, Bangladesh
Haeng Muk Cho, Department of Mechanical Engineering, Kongju National University, Chungcheongnam-do, South Korea
ID 169 Chemical cleansing process for pipelines with servomechanisms
Gerardo Espinosa Garza, Universidad de Monterrey, Monterrey, Nuevo León, México
ID 170 locating an Urban Distribution Center based on Road Safety
Maha BENNANI, MGSI/ LPEDD, Fes, Morocco
ID 171 TCSC Integration in National Transmission system of Pakistan to enhance transmission capability: A case study of Hub Jamshoro Section
Mukhtiar Ahmed Mahar, Abdul Sattar Larik and Irfan Ahmed Bajkani, Department of Electrical Engineering, Mehran University of Engineering and Technology, SZAB Campus, Khaipur Mirs, Pakistan
ID 173 Information Systems for Industrial processes support and optimization
Teresa Pereira, Research Center of Mechanical Engineering (CIDEM), Institute of Engineering of Porto of Polytechnic Institute of Porto, ISEP/P.Porto, Rua Dr. António Bernardino de Almeida, 431, 4200-072, Porto, Portugal
Fernanda A. Ferreira, Applied Management Research Unit (UNIAG), School of Hospitality and Tourism of Polytechnic Institute of Porto, Rua D. Sancho I, 981 4480-876, Vila do Conde, Portugal
André Silva, Mechanical Engineering Master Student, Institute of Engineering of Porto of Polytechnic Institute of Porto, ISEP/P.Porto, Rua Dr. António Bernardino de Almeida, 431, 4200-072, Porto, Portugal
ID 174 Handling Multi-Objective Fuzzy Production Scheduling Problem with Mould Maintenance through Pigeon Inspired Optimization Algorithm
Fu Xiaoyue, Chan Felix T. S. and Chung S. H., Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Kowloon, Hong Kong
Niu Ben, College of Management, Shenzhen University, Shenzhen, China
Qu Ting, School of Electrical and Information Engineering, Jinan University, Guangzhou, China
ID 175 Real-time Fuzzy Control of the Assembly Line
Jiage Huo, Felix T.S. Chan and Carman K.M. Lee, Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong
Jan Ola Strandhagen, Department of Production and Quality Engineering, Norwegian University of Science and Technology, Trondheim, Norway
ID 176 Analysis Forecast Production Model: A Mexican Family Firm Proposal
Gonzalo Maldonado-Guzmán, Centro de Ciencias Económicas y Administrativas, Universidad Autónoma de Aguascalientes, Aguascalientes, Ags., México C.P. 20131
Jose Arturo Garza-Reyes, Centre for Supply Chain Improvement, University of Derby, Derby, DE22 1GB, UK
Lizeth Itziguery Solano-Romo, Centro de Ciencias Básicas, Universidad Autónoma de Aguascalientes, Aguascalientes, Ags., México C.P. 20131
ID 177 The Impact of the Introduction of ISO 9001 Standards – Case of a South African Power Station
Sambil Charles Mukwakungu, Matimba Davis Mabasa, Tebogo Lucky Mamela, Semanga Mabuza and Sihle Mankazana, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
ID 178 Feasibility analysis of a reusable material that allows photosynthetically active radiation and avoids high temperatures in greenhouses
Gerardo Espinosa Garza, Universidad de Monterrey, Mexico
Eduardo A. Elizondo Garza, Daniel A. Labastida Gamboa, Arturo Martínez Torres, Jhasua Carlos Reyna and Victor Garcia Vidal, Tecnologico de Monterrey, Mexico
ID 179 Quality Signaling through Crowdfunding Pricing
Ehsan Bolandifar, Hong Kong
ID 188 The Impact of Total Quality Management Practices on Organizational Performance of SMEs in Pakistan
Kamna Anam, Faculty of Management Sciences, Sir Syed CASE Institute of Technology (SSCIT), Islamabad, Pakistan
ID 200 Performance-Based Contracts for Energy Efficiency Projects
Sam Aflaki, HEC Paris – Operations Management and Information Technology
Roman Kapuscinski and Liang Ding, University of Michigan, Stephen M. Ross School of Business
ID 201 Creation of a RFID to improve productivity and Inventory Control
Imelda Loera Hernández and Natella Antonyan, Tecnologico de Monterrey, Monterrey, Nuevo León, México
Gerardo Espinosa Garza and Jacobo Tijerina Aguilera, Universidad de Monterrey, San Pedro Garza García, Nuevo León, México
ID 202 Operational Excellence: Concept Review and Meaning Restructuration
Jacobo Tijerina Aguilera & Nancy Lucero Tapia Ruíz, Universidad de Monterrey, San Pedro Garza García, Nuevo León, México
ID 203 Performance and Optimization of Service Rates & Servers for Closed Finite Queueing Systems
L. Kerbache, Department of Information Systems and Operations Management, HEC Paris, France
J. MacGregor Smith, Department of Mechanical and Industrial Engineering, University of Massachusetts at Amherst, Massachusetts 01003, USA
ID 204 Comparison between Hadoop and Spark
Houssam Benbrahim, Hanaâ Hachimi and Aouatif Amine, Systems Engineering Laboratory, BOSS-Team, National School of Applied Sciences, Ibn Tofail University, Kenitra, Morocco
ID 205 Are EGGS what you actually think: Here’s something interesting you might have no idea!
Mrs. Priya Sachin Deole, Department of physics, G.S. Tompe Art’s, Comm. & Science College, Chandur Bazar, Dist. Amravati (M.S) India
Mr. Nachiket Sachin Deole and Mrs. Manasi Vyankatesh Ghamande, Department of Engineering Sciences and Humanities, Savitribai Phule University, Pune, India
ID 206 Creating a KPI Tree for Monitoring and Controlling Key Business Objectives of First Mile Logistics Services
Sudipto Dasgupta, Specialist – Supply Chain Design, Flipkart Internet Pvt. Ltd., Bangalore, India
Sarvartha Kanchan, Director – Supply Chain Design, Flipkart Internet Pvt. Ltd., Bangalore, India
Tridev Kundu, Senior Manager – Supply Chain Design, Flipkart Internet Pvt. Ltd., Bangalore, India
ID 216 How Sustainable is Short Food Supply Chains? A Comprehensive Systematic Review
Vikas Kumar, Meng Wang and Archana Kumari, Bristol Business School, University of the West of England, Bristol, UK
Supalak Akkaranggoon, Khon Kaen University, Nong Khai, Thailand
Jose Arturo Garza-Reyes, Centre for Supply Chain Improvement, University of Derby, Derby, UK
Daiane Neutzling, Universidade de Fortaleza, Fortaleza, Brazil
ID 217 The Role of Program Advisory Board in Elevating the Degree Program Content
Albertus Retnanto, Ph.D., Petroleum Engineering, Texas A&M University at Qatar, Doha, Qatar
Hamid R. Parsaei, Ph.D., P.E., Mechanical Engineering, Texas A&M University at Qatar, Doha, Qatar
Boback Parsaei, Integrated Technology Systems, Inc., Houston, Texas
ID 222 Foreign Exchange Risk Sharing Arrangement and Optimal Inventory Ordering Policies
Suresha Kharvi, Mangalore University Mangalagangotri574199, India
T. P.M. Pakkala, Justice K S Hegde Institute of Management, Nitte, Karnataka, India
G. Srinivasan, Faculty of Administration, University of Brunswick, Canada
ID 223 Budget Allocation Model for Public Senior High School Academic Programs
Rene D. Estember and Chrystalline Gale Y. Calvez, School of Industrial Engineering and Engineering Management, Mapua University, Manila, Philippines
ID 224 Design and Simulation Based Validation of a Reconfigurable Manufacturing System
Bashir Salah, Industrial Engineering Department, College of Engineering, King Saud University, P.O. Box 800, 11421, Riyadh, Saudi Arabia
ID 225 Assessment of Health and Safety Issues in a Manufacturing Industry
Munim Shaukat, UMT, Lahore, Punjab, Pakistan
ID 226 Musculoskeletal risk assessment among the male workers engaged in craft sectors of Jaipur, India
Ashish Kumar Singh, Makkhan Lal Meena and Himanshu Chaudhary, Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur, Rajasthan 302017, India
ID 232 Time Driven Activity Based Costing in Outpatient Logistics
Kakrona Din and Duangpun Kritchanchai, Department of Industrial Engineering, Mahidol University, Nakhon Pathom, Thailand
Atchara Dokkulab, Ramathibodi Hospital, Bangkok, Thailand
ID 233 Applying a genetic algorithm to a signboard layout problem based on a flow captured location-allocation problem
Nozomi Yoshimura, Gaku Miyai and Yoichi Shimakawa, Department of Computer Science and Technology, Salesian Polytechnic Machida, Tokyo 194-0215, Japan
ID 234 Application of Value Stream Mapping to Improve Financial Performance of a Production Floor: a Case Study
Subrata Talapatra and Jannatul Shefa, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology, Khulna, Bangladesh
ID 235 Development of an Online Blood Management System
Subrata Talapatra, Assistant Professor, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology, Khulna, Bangladesh
Raihanul Kabir, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology, Khulna, Bangladesh
Akash Shingha Bappy, Department of Electronics and Communication Engineering, Khulna University of Engineering & Technology, Khulna, Bangladesh
ID 236 A Train Cabin Design for Persons with Mobility Impairment and Special Needs: An Ergonomic Intervention
Ma. Janice J. Gumasing, Marion Ollie V. Zerrudo and Josephine D. German, School of Industrial Engineering and Engineering Management, Mapua University
ID 237 Logistic Strategy to Face Disruption in Freight Multimodal Transportation Network
Erly Ekayanti Rosyida, Doctoral Student at Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember Surabaya, Indonesia
Universitas Islam Majapahit, Mojokerto, East Java, Indonesia
Budi Santosa and I Nyoman Pujawan, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
ID 238 A Cross-Sectional Study on Occupational Risk Factors of BPO Agents in the Philippines
Ma. Janice J. Gumasing and Jennifer G. Ilagan, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila 1002, Philippines
ID 239 A method to ensure IE Standards, Capacity Planning and Actual Measurement in perfect synchronization for right investment decision
Lim Chun Pei and Lim Ming Siong, Infineon Technologies (Malaysia) Sdn. Bhd., Malacca 75350, Malaysia
Tang Ho Hwa, Infineon Technologies Asia Pacific Pte. Ltd., 349253, Singapore
ID 240 Requirement Analysis for SMART Supply Chain Management for SMEs
Poti Chaopaisarn, Center of Excellence in Logistics and Supply Chain Management, Chiang Mai University, Chiang Mai, Thailand
Manuel Woschank, Chair of Industrial Logistics, University of Leoben, Leoben, Austria
ID 241 Field study to identify requirements for smart logistics of European, US and Asian SMEs
Patrick Dallasega, Industrial Automation and Engineering (IEA), Faculty of Science and Technology, Free University of Bozen-Bolzano, Piazza Università 5, 39100 Bolzano, Italy
Manuel Woschank, Chair of Industrial Logistics, University of Leoben, Erzherzog-Johann-Strasse 3/1, A-8700 Leoben, Austria
Sakgasem Ramingwong, Korrakot Yaibuathet Tippayawong and Nilubon Chonsawat, Center of Excellence in Logistics and Supply Chain Management, Chiang Mai University, Thailand
ID 242 Governance reform of Moroccan Urban Public Transport sector: Current state, challenges and perspectives
Zehmed Karim and Jawab Fouad, High School of Technology (HST), Sidi Mohamed Ben Abdellah University (SMBAU), PB 2427 Imouzzer Road 30000, Fez, Morocco
ID 243 A Best Practice Reference Model for Agricultural Supply Chain for Rice
W.M.S.K. Weerabahu and L.D.J.F. Nanayakkara, Department of Industrial Management, Faculty of Science, University of Kelaniya, Sri Lanka
ID 244 Assessing Service Quality in Healthcare Public Sector: An Exploratory on Government Owned Clinics
Linda Theresia, Industrial Engineering Department, Institut Teknologi Indonesia, Indonesia
Ramon Bangun, Retiree from the Ministry of Industry, Republic of Indonesia
ID 249 Implementation of Overall Equipment Effectiveness (OEE) in Garment Manufacturing Industry
Ateeq ur Rehman, Muhammad Babar Ramzan, Abher Rasheed and Muhammad Salman Naeem, Department of Garment Manufacturing, National Textile University, Faisalabad, Pakistan
ID 250 Photovoltaic plant Production and Maintenance Forecast
Hajej Zied and Rezg Nidhal, LGIPM UFR MIM, Lorraine University, Metz, 57073, France
ID 251 Simulation-based Optimization Model to Enhance Petroleum Distribution Network in Sri Lanka
W.W.N. Sachini, W.M.S.K. Weerabahu, R. Wickramarchchi, Department of Industrial Management, University of Kelaniya, Sri Lanka
ID 252 Distributed Job Scheduling Using Multi-Agent System
Sandeep Kumar and Bhupesh Kumar Lad, Industrial and Systems Engineering, Discipline of Mechanical Engineering, Indian Institute of Technology Indore, Indore, 453 552, India
Maharshi Harshadbhai Dhada, Department of Engineering, Institute for Manufacturing, University of Cambridge, CB3 0FS, UK
Kshitij Bakliwal, Department of Computer Science, Purdue University, West Lafayette, IN 47907, USA
ID 253 Iterated Local Search in Physician Scheduling problem
Khalid Al Ghathbar, Mohamed Aly Louly and Mehdi Mrad, Industrial Engineering Department, King Saud University, Riyadh, Kingdom of Saudi Arabia
ID 254 Application of Lean Manufacturing at Warehouse with Simulation Approach
Andreas Arga Donovan, Humasian Nindya Eyba and Vidya Rianti Siahaan, Undergraduate of Industrial Engineering Study Program, Pembangunan Nasional Veteran Jakarta University, Jl. RS Fatmawati, Pd. Labu, Cilandak, Kota Depok, Daerah Khusus Ibukota Jakarta 12450
ID 255 Designing Supervisory Policies that Avoid Livelocks in Manufacturing- and Service-Systems Modeled using General Petri Nets: A Tutorial using an Illustrative Example
R. Khalegi, A. Raman and R.S. Sreenivas, Department of Industrial and Enterprise Systems Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USA
ID 256 A New Approach for Classifying Cross-functional Teams in Product Development Projects
Hamdi Bashir, Department of Industrial Engineering and Engineering Management, Sustainable Engineering Asset Management (SEAM) Research Group, University of Sharjah, Sharjah, UAE
ID 257 Modeling and Analyzing Interrelationships among Project Success Factors and Criteria
Gordian Udechukwu Ojiako, Anwar Hamdan, and Hamdi Bashir, Department of Industrial Engineering and Engineering Management, College of Engineering, University of Sharjah, Sharjah, UAE
ID 258 Structuring Project Interdependencies into a Simple Graphical Hierarchical Model
Helal Al Zaabi and Hamdi Bashir, Department of Industrial Engineering and Engineering Management, University of Sharjah, Sharjah, UAE
ID 259 The Influence of Customer’s Belief about E-service Delivery Process on Behavioral Intentions: The Mediating Role of Attitude in a B-A-I Model
Piyush Gupta and Amit Sachan, Indian Institute of Management Ranchi, Ranchi, 834008, India
ID 260 Corporate Sustainability Performance Measurement: A Systematic Review and proposal of an indicator Grid for Manufacturing Companies
Anissa Frini, Department of management science, University of Quebec at Rimouski, Campus of Lévis, 1595, boulevard Alphonse-Desjardins, Lévis (Québec) Canada
Dominique Diouf, Centre d’Étude en Responsabilité Sociale et Écocitoyenneté (CÉRSÉ), Collège Rosemont, Montréal, Canada
Department of management, Laval University, Quebec, Canada
ID 261 Modelling the Effects of Friction on Tool-Chip Interface Temperature During Orthogonal Cutting of Al6061-T6 Aluminium Alloy
Sunday Joshua Ojolo, Sikiru Oluwarotimi Ismail and Kelechi Ogbuanu, Department of Mechanical Engineering, University of Lagos, Akoka-Yaba, Lagos, Nigeria
ID 262 Reflections on Teaching, Research, and Service of a Faculty Member for Those Transitioning into a University Tenure Track Faculty Position
Aezeden Mohamed, Faculty of Engineering and Applied Science, Memorial University, Canada St. John’s
Mechanical Engineering Department, PNG University of Technology, Lae, MP 411, Papua New Guinea
John Pumwa, Mechanical Engineering Department, PNG University of Technology, Lae, MP 411, Papua New Guinea
ID 263 Micromechanism and Failure Analysis of INCONEL601
Aezeden Mohamed and John Pumwa, Mechanical Engineering Department, PNG University of Technology, Lae, MP 411, Papua New Guinea
ID 264 Multi-level network planning for blood supply for critical conditions
Sahra Mahdavi and Seyyed Mehdi Sajadifar, Department of Industrial engineering, University of Science and Culture, Iran
ID 265 Generalization Model for Product Development Time in various Market Properties
Mahmood Al Kindi, Ahm Shamsuzzoha and Emad Summad, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Oman
ID 266 Customer economics trust in Business using Instagram
Homa Atefyekta and Nasser Safaie, K. N. Toosi University of Technology, Tehran, Iran
ID 267 Selection and scheduling of interdependent projects using a modified genetic algorithm
Manish Kumar, M L Mittal, Gunjan Soni and Dheeraj Joshi, Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur, India
ID 268 Random Location under Fixed Zone Storage Strategy – A Case Study of Automobile and Electronic Parts Manufacturing Factory
Pikchaya Khongkaew, Industrial Management, Faculty of Business Administration, Thai-Nichi Institute of Technology, Bangkok, 10250, Thailand
ID 269 A Fuzzy AHP Approach to Evaluate Contributing Factors in the Occurrence of Adverse Events in Philippine Hospitals
Jane Frances Cartalla, Kenneth Aynrand Montoya, Shiela May Suyo and Giselle Joy Esmeria, Industrial Engineering Department, De La Salle, University Manila
Michael Angelo Promentilla, Chemical Engineering Department, De La Salle University Manila
ID 270 Impact of Business Process Reengineering of Reverse Logistics for Improving Supply Chain Performance: A Conceptual Framework from a Systematic Review of Literature
Thisuri Kaluarachchi, Kalpani Sarathchandra, Ganguli Wijewardhana and Samanthi Weerabahu, Department of Industrial Management, Faculty of Science, University of Kelaniya, Sri Lanka
ID 271 Mathematical Model of Average waiting time for an Elevator Based on Stochastic Process
Yuki Satoh, Advanced Course in Production Systems Engineering, Salesian Polytechnic Machida, Tokyo 194-0215, Japan
Yoichi Shimakawa, Department of Computer Science and Technology, Salesian Polytechnic Machida, Tokyo 194-0215, Japan
ID 272 Optimization in Personnel Scheduling for Local Content Verification
Rahmat Nurcahyo, Setio Agung Wibowo, Amar Rachman, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, 16424, Indonesia
Alan Dwi Wibowo, Agroindustrial Technology Department, Faculty of Agriculture, Universitas Lambung Mangkurat, Jl A Yani KM 36, Banjarbaru, Kalimantan Selatan, Indonesia
ID 273 A Strategy of Local Content Enhancement in Petroleum and Natural Gas Industry
Rahmat Nurcahyo, Ervina Loide Hutasoit and Erlinda Muslim, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, 16424, Indonesia
Alan Dwi Wibowo, Agroindustrial Technology Department, Faculty of Agriculture, Universitas Lambung Mangkurat, Jl A Yani KM 36, Banjarbaru, Kalimantan Selatan, Indonesia 70714
ID 274 A Study of the Implications of Logistics 4.0 in Future Warehousing: A Sri Lankan Perspective
Navodika Karunarathna, Ruwan Wickramarachchi and Kasuni Vidanagamachchi, Department of Industrial Management, Faculty of Science
University of Kelaniya, Sri Lanka
ID 275 Sustainability perspective in aggregate production planning model with fuzzy parameters
Nguyen Truong Thi, Tran Thi My Dung, Vo Thi Kim Cuc, Department of Industrial Management, College of Engineering & Technology, Can Tho University, Vietnam
ID 276 A New Layout Problem for Order-Picking Warehouses
Ömer Öztürkoğlu, Department of Business Administration, Yaşar University, Izmir, 35100 TURKEY
Ayşegül Mağara, Schneider Electric, Izmir, 35100 TURKEY
ID 277 Pilot Static Modeling of Social Business: Case of Kampong Jelekong in Bandung
Gadang Ramantoko, Palti M Sitorus, Sri Widyanesti, Faculty of Economics and Business (FEB), Telkom University, Bandung, 40257, Indonesia
ID 278 Decentralization of Medical Emergency Service to Minimize Response Time
Muhammad Isnaini Hadiyul Umam and Diva Kurnianingtyas, Doctoral Student of Industrial Engineering Department, Institut Teknologi Sepuluh, Nopember, Surabaya, 60111, Indonesia
Budi Santosa and Nurhadi Siswanto, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, 60111, Indonesia
ID 279 Coalescing the Lean and Circular Economy
Simon Peter Nadeem, Jose Arturo Garza-Reyes and Anthony I Anosike, Centre for Supply Chain Improvement, University of Derby, Derby, U.K.
Vikas Kumar, Bristol Business School, University of the West of England, Bristol, U.K.
ID 280 Multi-period Temporary Depot Location Problem in Flood Natural Disaster Response
Wapee Manopiniwes, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai, Thailand
Takashi Irohara, Faculty of Science and Technology, Sophia University, Tokyo, Japan
ID 281 Developing a Roadmap to Become a World Class Manufacturing Company: A Case of Process Industry in India
Dr. Anup P. Chaple, Manager – Industrial Engineering, UPL Ltd., India
Sanjay Dharajiya, Lead- World Class Manufacturing, UPL Limited, India
ID 283 Analyzing The Increase In Production Rate By Implementing Value Stream Mapping (Vsm) In Manufacturing Processes
Zehra.K, Shaikh.S2, Tanweer.H, Faheem.A and Zehra.C, Department of Manufacturing Engineering, Mehran university of Engineering & technology, jamshoro, Sindh 67020, Pakistan
ID 284 Present Scenarios of Energy Utilization in Bangladesh
Mohammad Iqbal, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
Farhad Hawlader, Department of Petroleum and Mining Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
Salma Akhter, Department of Chemical Engineering and Polymer Science, Shahjalal University of Science and Technology, Sylhet, Bangladesh
Engr. SumayelMuhamad Mallik, Uiversal Yarn Dyeing Ltd.H#445, R#07, Baridhara DOHS, Dhaka-1206, Bangladesh
A. Rashid, Department of Mechanical and Chemical Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh
ID 285 Trends in Green Vehicle Routing in Reverse Logistics
E. Waidyathilaka, V.K. Tharaka and A.P.R. Wickramarachchi, Department of Industrial management, University of Kelaniya, Sri Lanka
ID 286 Technology-driven LPG Supply Chain Integration – A Case of Pakistan
Farhan Daud Qazi and Ijaz Ahmad Chaudhry, Industrial Engineering Department, School of Engineering, University of Management and Technology, Lahore, Pakistan
Omar Zaid, Production Manager, Hadeed Pakistan Pvt. Limited, Sheikhupura, Pakistan
ID 287 Network Security analysis using Markov Models
Shwetank Sharan, Manish Agrawal and Anubhav Shukla, Department of Industrial and Systems Engineering, Indian Institute of Technology, Kharagpur, INDIA
ID 288 Analyzing the impacts of Lean tools and techniques on the efficiency of manufacturing organizations
Ahmed, F., Shaikh, S.A., Hussain, T., Zehra, K. and Dawood Mehran UET, Jamshoro
ID 289 A Model for Assessing Maturity of Industry 4.0 in the Banking Sector
Oshadhi Bandara, Kasuni Vidanagamachchi and Ruwan Wickramarachchi, Department of Industrial Management, Faculty of Science, University of Kelaniya, Sri Lanka
ID 290 Case Study on Maintenance Management Framework of a LPG Cylinder Manufacturing Industry
A.Rashid, Department of Mechanical and Chemical Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh
Md. Shamsuzzoha Sarker, Department of Mechanical and Chemical Engineering, Islamic University of Technology, Gazipur, Dhaka, Bangladesh
ID 291 Solving Multi-Objective Assignment Problem with Decision Maker’s Preferences by Using Genetic Algorithm
Md. Mahbubur Rahman, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology, Khulna-9203, Bangladesh
Md. Kutub Uddin, Department of Mechanical Engineering, Khulna University of Engineering & Technology, Khulna-9203, Bangladesh
ID 292 Comparative Study of Systemic Modeling Models for Road Safety
Nassima Laaraj, Laboratory of Energy & Sustainable Development (LPE2D), Sidi Mohamed Ben Abdellah University – EST, Road of Imouzzer – BP: 2427 – Fez, Morocco
Fouad Jawab, LPE2D & Laboratory of International Management Decision techniques and Logistics, Sidi Mohamed Ben Abdellah University – EST, Road of Imouzzer – BP: 2427 – Fez, Morocco
ID 293 An Optimization-based Approach Model for the Improvement of the Performance of Emergency Medical Service Ambulances
Rene D. Estember, Ilynne Geraldine A. Isip, and Ma. Camille C. Misal, School of Industrial Engineering and Engineering Management, Mapua University, Manila, Philippines
ID 294 Verification and Validation Methods across the Product’s Lifecycle: A systematic Analysis and Review
Aineias Karkasinas and Athanasios Rentizelas, Department of Design, Manufacturing and Engineering Management, Strathclyde University, Glasgow, Scotland
ID 295 A rough-set based-approach for anticipating competitor’s decisions
Dhekra Ben Sassi, Department of Information systems, College of Computer Engineering and Science, Prince Sattam Bin Abdulaziz University, Al Kharej, KSA
RIADI laboratory, National School of Computer Science, La Manouba, Tunisia
Frini Anissa, Department of Management Science, University of Quebec at Rimouski, Levis, Canada 1595, boulevard Alphonse-Desjardins Lévis (Québec) Canada
ID 296 Suitability of Industry 4.0 Concepts for Small and Medium Sized Enterprises: Comparison between an Expert Survey and a User Survey
Erwin Rauch, Thomas Stecher, Marco Unterhofer, Patrick Dallasega and Dominik T. Matt, Industrial Automation and Engineering (IEA), Faculty of Science and Technology, Free University of Bolzano, Piazza Università 5, 39100 Bolzano, Italy
ID 297 Research Advances in Intelligent Transportations Systems (The Case of Advanced Public Transportation Systems
Youssef El Mokaddem and Fouad Jawab, Laboratory of International Management, Decision Making and Logistics (MIDLOG), USMBA, High School of Technology (EST) – Fez, Morocco
ID 298 Location of an Urban Distribution Center Based On Ghg Emissions
Maha BENNANI, MGSI/ LPEDD, Fes, Morocco
Imane MOUFAD, Laboratory of Energy & Sustainable Development (LPE2D), Morocco
ID 299 Identification of health system stakeholders in Morocco
Frichi Youness, Jawab Fouad and Boutahari Said, Laboratory of Manufacturing, Energy and Sustainable Development, Sidi Mohamed Ben Abdellah University, Fez, Morocco
ID 300 Challenges of Total Quality Management in Higher Education Institutions
Abdullah Al-Amri and T.C. Wong, Department of Design, Manufacture and Engineering Management, University of Strathclyde, Glasgow, 75 Montrose St, Glasgow G1 1XJ, UK
ID 301 Applications of Virtual Reality (VR) as Teaching Tool to Enrich Students Learning
Mohamed Ismail, Ph.D., Senior IT Consultant, Texas A&M University at Qatar, Education City, Doha, Qatar
Hamid R. Parsaei, Ph.D., P.E., Professor, Mechanical Engineering, Texas A&M University at Qatar, Education City, Doha, Qatar
Boback Parsaei, Senior Consultant, Integrated Technology Systems, Inc., Houston, Texas
ID 302 Predictive Maintenance as a Means to Improve the Availability of Centrifugal Slurry Pump at Ergo City Deep Plant
Aroon Martinus, Jan Harm C Pretorius and Arie Wessels, Postgraduate School of Engineering Management, University of Johannesburg, Johannesburg, South Africa
ID 303 Sustainable Biodegradable Packaging Material: A Solution for Decreasing Available Capacity of Landfills in the Philippines
Juan Miguel N. Dinglasan, Master of Science in Industrial Engineering and Management, Polytechnic University of the Philippines, Manila, Philippines
ID 316 Cognitive Ergonomics and Electrophysiological Measures of Human Attention and Performance
Bradley Chase, Industrial & Systems Engineering, Shiley-Marcos School of Engineering, University of San Diego, San Diego, CA 92110, USA
ID 317 Women Entrepreneurship in Indonesia: current status and future research opportunities
Luh Putu Eka Yani and Ammar Mohamed Aamer, Industrial Engineering Department, Faculty of Engineering and Technology, Sampoerna University, Jakarta, Indonesia
ID 318 The Role of Digital Leadership on Development of Dynamic Capability with Mediating Variable on Market Orientation and Innovation Capabilities for Indonesia Telecommunication Firms in Facing Disruptive Era
Leonardus W Wasono Mihardjo, Doctor of Research in Management, Bina Nusantara University, West Jakarta, Indonesia
Riza A.N. Rukmana, Senior Member, Industrial Engineering, Telkom University, Bandung, Indonesia
ID 319 Design And Implementation of Automation for Plant Nursery Process Time Reduction
Dian Yulianto, Salaya, Nakhon Pathom, Thailand
ID 320 Aggregated Metrics to Assess Fuel Consumption in Freight Fleets
Jenny Díaz Ramírez, Department of Engineering, Universidad de Monterrey, Monterrey, N.L. 66238, Mexico
José Ignacio Huertas, Energy and Climate Change Research Group, School of Engineering and Science, Tecnológico de Monterrrey, Monterrey, N.L., 68849, Mexico
Nicolas Giraldo Peralta, Mechanical, Electromechanical, and Biomedical Department, Universidad Antonio Nariño, Bogota, D.C., Colombia
ID 326 Ergonomic Design of an Assistive Propulsion System for Manual Wheelchairs
Madylaine G. Delfin and Danna May G. Mendez, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila
ID 328 A Study on the Facility Layout and Design of Sugar Plants in the Philippines
Madonna F. Andrada and Muriem R. Biscocho, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila City
ID 329 A review on the awareness of health care practitioners on medical waste: A Case South African health care
Sambil Charles Mukwakungu, Matimba Davis Mabasa, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
ID 330 The Impact of Just in Time (JIT) in South African Company’s Inventory Management – Case Studies
Sambil Charles Mukwakungu, Matimba Davis Mabasa, Sihle Mankazana, Xolani Mzileni and Sine Aurore Burakeye, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
ID 331 The Impact of Corporate Social Responsibility on Consumer Purchase Behaviour in High-Street UK Retailers
Christabel Annora Paramita Parung, S.T., M.Sc., Faculty of Creative Industry, University of Surabaya, Surabaya, Indonesia
ID 332 Construction industry and women: A review of the barriers
Dr Abdussalam Shibani, lecturer in construction and project management Coventry University
Noof Alawanati Msc, Construction management Coventry University
ID 333 An Energy Harvesting Alternative to Wellhead Gas Chokes
Albertus Retnanto, Ph.D. and Mohamed Idris, Petroleum Engineering, Texas A&M University at Qatar, Doha, Qatar
ID 334 The Dynamics of Community and Parents Participation: Huyula Culture Approach In Educational Financing In High School, Vocational School And Madrasah Aliyah (Islamic High School) In Gorontalo Province, Indonesia
Arwildayanto, Educational Management Program, School of Educational Science, Universitas Negeri Gorontalo
Popi Puadah, School of Postgraduate Program, Islamic Education, Universitas Islam Jakarta
Hendri, School of Engineering, Universitas Mercu Buana
ID 335 A Multi-Item Inventory Control Model Using Multi-Objective Particle Swarm Optimization (MOPSO)
Ferdous Sarwar, Mahjabin Rahman and Mushaer Ahmed, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh
ID 336 Hidden Markov Models to Detect Early Equipment Failure
Prince Agarwal, K Subash Nirmal, K Nageswara Reddy, Akhilesh Kumar, Department of Industrial and Systems Engineering, Indian Institute of Technology, Kharagpur, West Bengal, India-721302
ID 337 Development of Educational Process Capability Maturity Model
Nedaa Alshaheen, Total Quality Management Techniques Department, Middle Technical University, Baghdad, Iraq
Sura Alshaheen, Republic of Iraq Ministry of Education, Department of Total Quality Management and Organizational development, Baghdad, Iraq
ID 338 A Formulation of Priority – Based Financial Allocation Model for Student Development Activities in SPED Centers
Jenalyn Shigella G. Yandug and Phoebe Lie T. Dionisio, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila
ID 339 Knowledge Management by Farmers in the Win-Win Relationship Project in Land Reform Areas, Northern Thailand
Wallratat Intaruccomporn, Department of Agricultural Economy and Development, Faculty of Agriculture, Chiang Mai University, Thailand
ID 340 Demand Modelling and Establishment of Supply Chain Management for Coconut Sugar in the Philippines
Mary Christy O. Mendoza and Erica Racquel G. Cruz, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila
ID 341 Design issues in Maheshwar handcrafts (MP, India)
Pratik Mukesh, Master of Design, Design Discipline, PDPM Indian Institute of Information Technology, design and Manufacturing, Jabalpur, M.P., India
ID 342 Early Detection of Equipment Failure Using One-class Support Vector Machine
K Subash Nirmal, Prince Agarwal and K Nageswara Reddy, Department of Industrial and Systems Engineering, Indian Institute of Technology, Kharagpur, West Bengal, India
ID 343 Information Layout Designing of ‘Barco Display Screen’ used in State Load Despatch Centre at MPPTCL
Pratibha Sahu, Master of Design, Design Discipline, PDPM Indian Institute of Information Technology Design & Manufacturing, Jabalpur, M.P., India
ID 344 Higher initial costs for renewables electricity: Emission, water and job-creation benefits offset the higher costs
Md. Mizanur Rahman, Hasan Mohd Faizal, Aminuddin Saat and Mazlan Abdul Wahid, Department of Thermo Fluids, School of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 UTM, Johor Bahru, Malaysia
ID 345 Using a Safety Culture Assessment of Multinational Oil/Gas Companies to Improve Safety Performance in Saudi Arabia
Saleh Al Sulaie and Eui H. Park, Department of Industrial & Systems Engineering, North Carolina A&T State University, Greensboro, NC
ID 346 Impacts of Gender on Environmental and Cultural Influences in the Adoption of E-Commerce in Saudi Arabia
Khaled Alyami and Eui H. Park, Department of Industrial & Systems Engineering, North Carolina A&T State University, Greensboro, NC, U.S.A.
ID 347 Optimal production planning of hybrid manufacturing/remanufacturing systems under deteriorations
Annie Francie Kouedeu, Jean-Pierre Kenné and Victor Songmene, Department of Mechanical Engineering, Laboratory of Integrated Production Technologies, University of Qurbec, Ecole de technologie supérieure, 1100 Notre-Dame Street West, Montreal, Quebec, Canada
ID 348 Innovation Process of Music Composing: A Case Study in Conservatory of Music
Evo Sampetua Hariandja, Department of Management Business School, Universitas Pelita Harapan, Tangerang-15811, Indonesia
ID 349 Dynamic Marketing Capability in Start-up Companies: An Exploratory Investigation of the Female Entrepreneurs
Evo Sampetua Hariandja, Department of Management Business School, Universitas Pelita Harapan, Tangerang-15811, Indonesia
ID 350 Lean Techniques Application to Improve Product Replacement Process in a Manufacturing Organization: Case of a Brandable Company in Johannesburg, South Africa
Sambil Charles Mukwakungu, Matimba Davis Mabasa and Xihlovo Baloyi, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
ID 356 Business English as a Global Needs for Entrepreneur Students of Narotama University
Elok Damayanti and Agus Sukoco, Narotama University, Arief Rahman Hakim No. 51, Surabaya, Indonesia
ID 357 The effect of Project Portfolio Selection on Business success: An empirical study in the Indian Auto Component Industry
Vilas Kharat, NITIE, Mumbai, Maharashtra, India
ID 358 Impacts of E-commerce in apparel supply chain
Shibbir Ahmad, SUST Gazipur, Bangladesh
ID 360 Project risk management in Iranian software projects
Ali Reza Afshari, Department of Industrial Engineering, Shirvan Branch, Islamic Azad University, Shirvan, Iran
ID 362 Privacy and Security aware Cryptographic Algorithm for Secure Cloud Data Storage
B. Muthulakshmi, Department of Computer Applications, Kalasalingam Academy of Research and Education, Anand Nagar, Krishnankoil
M.Venkatesulu, Department of Information Technology, Kalasalingam Academy of Research and Education, Anand Nagar, Krishnankoil
ID 363 Modified Multivariate Control Chart Using Spatial Signs and Ranks for Monitoring Process Mean: A Case of t-Distribution
Thidathip Haanchumpol, Prapaisri Sudasna-na-Ayudthya and Chansiri Singhtaun, Department of Industrial Engineering, Faculty of Engineering, Kasetsart University, Bangkok, Thailand
ID 364 Multi-objective Robust Optimization for the Design of Biomass Co-firing Networks
Jayne Lois G. San Juan and Charlle L. Sy, Industrial Engineering Department, De La Salle University, Manila, Philippines
ID 365 Factors Investigation for the Development of Medical Device towards Sustainable Product
Taisy Mak and Duangpun kritchanchai, Department of Industrial Engineering, Mahidol University, Salaya, Nakhon Pathom, 73170, Thailand
ID 366 Autocorrelated Multivariate Control Chart in Cooking Oil Industry
Ivan Pudjihardjo, Ig. Jaka Mulyana and Luh Juni Asrini, Industrial Engineering Department, Widya Mandala Surabaya Catholic University, Jl. Kalijudan 37 Surabaya, Indonesia
ID 367 A Scheduling Model for Full Maintenance of Automated Teller Machines
Carlos Ilagan, Angelia Trinidad, John Lorenz Wee and Charlle Sy, Industrial Engineering Department, De La Salle University, Manila, Philippines
ID 368 An Optimization Model for the Design of an Off-Grid Micro-Hydro Power Plant
Juan Carlo Hernandez, Carlos Jan Peñas, Adrianne Ressa Tiu and Charlle Sy, Industrial Engineering Department, De La Salle University, Manila, Philippines
ID 369 Carbon Emission Impact on the Logistics of Second Generation Biomass (SGB) in Island Nations: a Case Study of Indonesia
Denny Satria Ika and Hui-Ming Wee, Chung-Yuan Christian University, Taoyuan, Chung-Li, Taiwan
ID 370 Effect of Using Electronic Map While Driving on Human Error Probability
Lovely Lady, Wahyu Susihono, Industrial Engineering Department, University of Sultan Ageng Tirtayasa, Cilegon – Indonesia
ID 371 A New Metaheuristics for Solving Traveling Salesman Problem: Partial Comparison Optimization
Antono Adhi, Industrial Engineering Department, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia,
Industrial Engineering Department, Universitas Stikubank, Semarang, Indonesia
Budi Santosa and Nurhadi Siswanto, Industrial Engineering Department, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
ID 372 Disaster Resilience Index: Development and Validation of a Scorecard for Measuring School Disaster Resilience Using Factor Analysis
Romalyn L. Galingan, Industrial Engineering and Management, Graduate School, Polytechnic University of the Philippines, Sta. Mesa, Manila
Industrial Engineering Program, College of Engineering and Architecture, Technological Institute of the Philippines, Quezon City
ID 373 Optimization of voltage and frequency by using ‘Ant Colony Optimization’ at hydro-electric power plant output having permanent magnate synchronous generator
Ompal Singh and Arunima Verma, IET Lucknow, Uttar Pradesh, India
ID 374 A Case Study on Average Handling Time of Calls in Teleperformance Company
Ramon C. Gloria III, Frendilyn Myca Valerie P. Ubiña and Bradley James D. Villanueva, Department of Industrial Engineering, Technological Institute of the Philippines, 363 P. Casal St., Quiapo, Metro Manila
Janina Elyse A. Reyes, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
ID 375 Using Statistical Process Control Measures to Minimize Defects in the Plastic Department of Marilao Alerco Industrial Corporation
Eugene R. Tamba, Racquel G. Tadina and Val Ryan Aguilar, Industrial Engineering, Technological Institute of the Philippines – Manila, 1338 Arlegui St. Quiapo, Manila
Janina Elyse Reyes, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
ID 376 Identifying Drivers of Lean Six Sigma Implementation in the Process Industries: A Case Study
Ferdous Sarwar, Farzana Islam, Md Sadman Sakib and Sampa Halder, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh
ID 377 Developing Green Supply Chains for New Kuwait: A Strategic Approach
Ghaliah Al-Mutairi, Mariam Al-Ajran, Hawraa Al-Bather, Fatma Mhaisen, Rawan Al-Humaidi, and Walid Smew, Industrial Engineering Department, American University of the Middle East (AUM), Eqaila, Kuwait
ID 378 A Case study of 5S Implementation in Inspection Process
Karthik Subburaman, Department of Mechanical Engineering, Veltech Rangarajan Dr Sagunthala R&D Institute of Science and Technology
Avadi, Chennai, Tamil Nadu, India
ID 379 Developing an SPC-EPC Unified Framework to Improve Production Disruption in Chemical Industry in Kuwait
Ali Issawy, Bader AlMutawaa, Samer Al khateeb, Osama Ahmad, Abdullah AlHaj Hasan, and Walid Smew, Industrial Engineering Department, American University of the Middle East (AUM), Eqaila, Kuwait
ID 380 Price-quantity-setting mixed duopoly models: market opening
Fernanda A. Ferreira and Flávio Ferreira, Polytechnic Institute of Porto, School of Hospitality and Tourism, Applied Management Research Unit (UNIAG), Rua D. Sancho I, 981, 4480-876 Vila do Conde, Portugal
ID 381 Implementing DHS algorithms using Artix-7
Hafiz Usama Hashmat, Department of Technology, Faculty of Engineering and Technology, The University of Lahore, Lahore, 54000, Pakistan
Abdul Rauf, Department of Electrical Engineering, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia
Umar Muhammad Ali, Department of Electrical Engineering, Georgia Institute of Technology, North Avenue, Atlanta, GA 30332, USA
Abdurrahman Mubeen Ali, Department of Electrical Engineering, FAST- National University of Computer and Emerging Sciences, Lahore, 54000, Pakistan
Dr. Anjum Ali, Professor of Electrical Engineering, Founder and CEO, RDM Associates, Atlanta, Georgia, USA
ID 382 Investigating the Adoption of Internet of Things Technology Using Agent Based Simulation
Mohammed Basingab, Industrial Engineering Department, King Abdulaziz University, Jeddah, 22252, Saudi Arabia
ID 383 Circular Economy in Industry: Some Insights and Directions to Implement Circularity
José Vasconcelos Ferreira and Ana Luísa Ramos, GOVCOPP/Department of Economics, Management, Industrial Engineering and Tourism
University of Aveiro, Aveiro, Portugal
Marta Miranda Camoesas, Department of Economics, Management, Industrial Engineering and Tourism, University of Aveiro, Aveiro, Portugal
ID 384 Customer Expectations Analysis on Aircraft Maintenance Outsourcing Companies
Rahmat Nurcahyo and Ramdha Dien Azka, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, 16424, Indonesia
Alan Dwi Wibowo, Agroindustrial Technology Department, Faculty of Agriculture, Universitas Lambung Mangkurat, Jl A Yani KM 36, Banjarbaru, Kalimantan Selatan, Indonesia
ID 385 Numerical Simulation for Shoreline Erosion by Using New Formula of Longshore Sediment Transport Rate
Subiyanto and Yudi Nurul Ihsan, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
Sukono and Sudradjat Supian, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Aceng Sambas, Department of Mechanical Engineering, Universitas Muhammadiyah Tasikmalaya, Indonesia
Acmad Rizal, Department of Fishery, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
Mohammad Fadhli Ahmad, Department of Maritime Technology, School of Ocean Engineering, Universiti Malaysia Terengganu, Malaysia
Mustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Malaysia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 386 Application of Spatial Weighting Matrix of GSTAR by Using CLARANS Clustering on Farmer Exchange Rates in 32 Provinces in Indonesia
Annisa Azizah, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Rini Cahyandari and Arief Fatchul Huda, Department of Mathematics, Faculty of Science and Technology, Universitas Islam Negeri Sunan Gunung Djati Bandung, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Subiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 387 The LASSO (Least Absolute Shrinkage and Selection Operator) Method to Predict Indonesian Foreign Exchange Deposit Data
Trisha Magdalena Adelheid Januaviani, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Bandung, Indonesia
Nurul Gusriani, Khafsah Joebaedi and Sukono, Department Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Bandung, Indonesia
Subiyanto, Department of Marine Science, Faculty of Fishery and Marine Science, Universitas Padjadjaran, Bandung, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 388 The Completeness of p-Summable Sequences as 2-Normed Spaces
Juan Miguel N. Dinglasan, Industrial Engineering Department, Technological Institute of the Philippines, Quezon City, Philippines
Shelvi Ekariani, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Andalas University, Padang, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Bandung, Indonesia
Subiyanto, Department of Marine, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Bandung, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 389 Application of Graph Hamilton on Determining the Shortest Route of Trans Metro Bandung
Yusuf Ibrahim Abdallah, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Yani Ramdani and Yurika Permanasari, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Islam Bandung, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Subiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 390 Numerical Simulation of Interferon Alpha (INF-α) in Mathematical Model of Immunotherapy
Subiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
Sukono and Sudradjat Supian, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Yuyun Hidayat, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Aceng Sambas, Department of Mechanical Engineering, Universitas Muhammadiyah Tasikmalaya, Indonesia
Mustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Malaysia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 391 Analysis Students Abilities in Completing Mathematical Problems Dimension Three in Junior High School
Rahmi Wiganda Elastika, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Zulkarnain, Department of Mathematics, Faculty of Teacher Training and Science, Universitas Riau, Indonesia
Mefa Indriati, Department of Mathematics, Faculty of Teacher Training and Science, Universitas Islam Riau, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Subiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 392 Streamlining the Flow of Production System through Elimination the Waste of the Overburden (Muri) for Manual Handling Process
Mohd Norzaimi Che Ani, Manufacturing Engineering Section, Universiti Kuala Lumpur – Malaysian Spanish Institute, Kedah, Malaysia
Shahrul Kamaruddin, Mechanical and Industrial Engineering Department, Universiti Teknologi Petronas, Perak, Malaysia
Ishak Abdul Azid, Mechanical Engineering Section, Universiti Kuala Lumpur – Malaysian Spanish Institute, Kedah, Malaysia
ID 393 Applications of Arduino Based LFR
Syed Sharjeel Imam, Sapienza University of Rome, Rome, Italy
Fareed Ahmad, Department of Bioinformatics, Jamia Millia Islamia, New Delhi, India
Mohammad Sadiq Saeed, Department of Civil Engineering, ZHCET, Aligarh Muslim University, Aligarh, India
Mohd Ovais R Khan, Department of CSE, Sapienza University of Rome, Rome, Italy
ID 394 Opportunities for Use of Blockchain Technology in Supply Chains: Australian Manufacturer Case Study
Elias Abou Maroun, Faculty of Engineering and Information Technology, University of Technology Sydney, Australia
Jay Daniel, Derby Business School, University of Derby, UK
ID 395 Design of Seven Level Dynamic Voltage Restorer For Voltage Sag And Harmonics Mitigation
K Chandrasekaran, University Tunku Abdul Rahman, Kampar, Perak, Malaysia
V.K. Ramachandaramurthy, Power Quality Research Group, University Tenaga Nasional, Malaysia
ID 396 Application of Statistical Process Control on Sunbless Industrial Corporation
Jerlyn Borja, Veniceredge Eugenio, Ferdinand Tomas and Ariana Villarico, Department of Industrial Engineering, Technological Institute of the Philippines, Manila, Philippines
Janina Elyse Reyes, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
ID 397 The Capacitated Team Orienteering Problem
Aldy Gunawan and Hoong Chuin Lau, School of Information Systems, Singapore Management University, Singapore, 178902
Kien Ming Ng and Gordy Adiprasetyo, Department of Industrial Systems Engineering & Management, National University of Singapore, Singapore, 117576
Vincent F. Yu, Department of Industrial Management, National Taiwan University of Science and Technology, Taipei 106, Taiwan
ID 398 Engineering Education through Students Engagement in Virtual Learning Space
Puteri Suhaiza Sulaiman, Department of Multimedia, Faculty of Computer Science and Information Technology, UPM Serdang, Malaysia
ID 399 Linking knowledge sourcing, transformation and exploitation activities for innovation: Evidence from UK manufacturing firms
Arif Hartono, Management Department, Faculty of Economics, Universitas Islam Indonesia, Ringroad Utara, Sleman, Yogyakarta 55281
ID 400 Improving the Fabrication and Welding Workshop at Kuwait Oil Company for Better Worker Performance by Using Digital Human Modeling and Simulation
Fatemah AlKhozam, Hebah AlEnezi, Muneerah AlMetlaqem, Rahaf AlAjmi, Shareefah Haji, Kareem Abbady, and Suat Kasap, Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East – AUM, Egaila, Kuwait
ID 401 Developing a Mobile Application for Safety Engineers for Detailed Hazard Analysis
Fay AlDallal, Nojoud AlMutairi, Mastourah AlRasheedi, Munerah AlShadad, Sarah AlShadad, and Suat Kasap, Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East – AUM, Egaila, Kuwait
ID 402 Food Waste in Supply Chains: A Literature Review
Atikha Sidhi Cahyana, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
Department of Industrial Engineering, Universitas Muhammadiyah Sidoarjo, Sidoarjo, Indonesia
Iwan Vanany and Niniet Indah Arvitrida, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
ID 403 A Technology Foresight Perspective on Household Waste Management Practices
Eta Wahab, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Johor, Malaysia
Zaurin Ali, Centre For Diploma Studies Department, Universiti Tun Hussein Onn Malaysia, Johor, Malaysia
ID 404 Service Quality to E-Service Quality: A Paradigm Shift
Sadaf Firdous and Rahela Farooqi, Centre for Management Studies, Jamia Millia Islamia, 110025, New Delhi, India
ID 405 Blood Supply Chain Challenges: Evidence from Indonesia
Agus Mansur, Iwan Vanany and Niniet Indah Arvitrida, Industrial Engineering Department, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
ID 406 Few Refinements to Capacitated Plant Location Problem
R.R.K. Sharma, Ajay Jha and Himanshu Rahangdale, Department of Industrial and Management Engineering, IIT Kanpur 208016, India
ID 407 Renewable Energy Management: Technical and Economic Evaluation of an Optimized Photovoltaic System
Hamed Allaham, Industrial Engineering and Engineering Management Department, College of Engineering, University of Sharjah, Sharjah, UAE
Abdul Kadir Hamid, Electrical and Computer Engineering Department College of Engineering, University of Sharjah, Sharjah, UAE
Ali Cheaitou, Sustainable Engineering Asset Management (SEAM) Research Group and Industrial Engineering and Engineering Management Department, College of Engineering, University of Sharjah, Sharjah, UAE
ID 408 Design Optimization of Equipment Controls Setup and Workstation Tables for the Remote Production Taping of a Media Broadcasting Company
Arriane A. Palisoc, Gerald O. Semifrania, Ma. Teodora E. Gutierrez, Yoshiki B. Kurata and Maricar M. Navarro, Department of Industrial Engineering, Technological Institute of the Philippines Quezon City, Philippines
ID 409 Few Refinements to Simple Plant Location Problem
R.R.K. Sharma, Ajay Jha and Urvashi Sharma, Department of Industrial and Management Engineering, IIT Kanpur 208016, India
ID 410 Development Of Internal Quality Assurance System Iso 9001: 2008 Based On Iwa 2: 2007 Using Web-Based Document Management Control (DMC) Applications
Hermien Tridayanti, Bayu Airlangga Putra, Sengguruh Nilowardono, Economic and Business Faculty, Narotama University, Surabaya, East Java, Indonesia
ID 411 Optimization of Biogas Production from sewage sludge
Mohamed Belaid, Anthony Njuguna Matheri, Itumeleng Constance Lelosa, Edison Muzenda and Ishmael Ramatsa, Department of Chemical Engineering Technology, Faculty of Engineering and the Built Environment, University of Johannesburg, Doornfontein, Johannesburg, South Africa
ID 412 Biochemical Methane Potential Analysis using Cow dung, Chicken manure and Pig manure under Mesophilic Conditions
Mohamed Belaid, Anthony Njuguna Matheri, Nomkhosi Princess Mdluli and Edison Muzenda, Department of Chemical Engineering Technology, Faculty of Engineering and the Built Environment, University of Johannesburg, Doornfontein, Johannesburg, South Africa
ID 413 Increasing Productivity in Garments Manufacturing through Time Standardization and Work Measurement
Valerie Peralta, Jerran Del Mundo, Juan Miguel Dinglasan, Patrick James Palma, Bert, Regin Santiago, and Cohesir Sims, Department of Industrial Engineering, Technological Institute of the Philippines, Quezon City, Philippines
ID 414 Statistical Analysis in Measuring Employee Performance at Department Store
Ahmad Syarif Hidayaulloh, Agus Sukoco, Elok Damayanti, Arasy Alimudin, M. Ikhsan Setiawan and Sriwiwoho Mudjanarko, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
Dani Hermanto, Faculty of engineering and technology, University of Derby, UK
Abdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia
ID 415 Analysis of the Efficiency of Company’s Strategy by Dismissing Employees and Replacing Them with the Home Industry
Arasy Alimudin, Agus Sukoco, Elok Damayanti, Rony Wardhana and Ibnu Farid, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
Dani Hermanto, Faculty of engineering and technology, University of Derby, UK
Abdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia
ID 416 Do E-Satisfaction And E-Trust Affect Online Repurchase Intention?
Ade Woroko, Santirianingrum Soebandhi, Avi Sunani, Hermin Tridayanti, Sengguruh Nilowardhono and Ronny Wardhana, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
Agus Sukoco, Faculty of engineering and technology, University of Derby, UK
Dani Hermanto and Abdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia
ID 417 The effects of chromosome length on hyper-heuristics for solving the maritime inventory routing problems
Nurhadi Siswanto, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, 60111, Indonesia
ID 418 Seal Slurry Analysis Based On Asbuton Addition and Cement Filler Variation
Ivandy Rahmadianto Madya, Sri Wiwoho Mudjanarko, Wahyu Mulyo Utomo and Ronny Dorotun, Departement of Civil Engineering, Narotama University, Surabaya, 60117, Indonesia
Agus Sukoco, Management Business, Narotama University, Surabaya, 60117, Indonesia
Arthur Daniel Limantara, Departement of Civil Engineering, State University of Surabaya, Surabaya, Indonesia
Firdaus Pratama Wiwoho, Departement of Civil Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, 60117, Indonesia
Abdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia
ID 419 Utilitarian and Hedonic Motivations: Its Influences on Search and Purchase Intention in Instagram
Randy Angga Kusuma, Santirianingrum Soebandhi, Hamzah Denny Subagyo and Agus Sukoco, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
Dani Hermanto, Faculty of engineering and technology, University of Derby, UK
Abdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia
ID 420 Indonesia Airport, Passanger and Aircraft impact on Regional Budget (APBD)
Muhammad Ikhsan Setiawan, Sri Wiwoho Mudjanarko and Ronny Durrotun Nasihien, Department of Civil Engineering, Narotama University, Surabaya, Indonesia
Agus Sukoco and Joko Suyono, Department of Management, Narotama University, Surabaya, Indonesia
Dani Hermanto, Faculty of Engineering and Technology, University of Derby, UK
Abdul Talib Bin Bon, Mohd Haziman Wan Ibrahim, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia
ID 421 Plastic Waste of Low Density Polyethlene (Ldpe) Types in Asphalt Mixture
Zulfawardi, Koespiadi, Sri Wiwoho Mudjanarko and M. Ikhsan Setiawan, Departement of Civil Engineering, Narotama University, Surabaya, 60117, Indonesia
Agus Sukoco, Management Business, Narotama University, Surabaya, 60117, Indonesia
Dadang Supriyatno, Departement of Civil Engineering, State University of Surabaya, Surabaya, Indonesia
Firdaus Pratama Wiwoho, Departement of Civil Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, 60117, Indonesia
Abdul Thalib bin Bun, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia
ID 422 Phenomenological Study of ERP-Based PDT Implementation in Enhancing Firm Performance
Avi Sunani and Rony Wardhana, Narotama University, Surabaya, East Java, Indonesia
ID 423 The Behavior and Entrepreneurial Intentions of the Millennia Generation of Indonesia, Studies in Surabaya City Students
Agus Sukoco, M. Ikhsan Setiawan, Sriwiwoho Mudjanarko, Arasy Alimudin and Iswachyu Dhaniarti, Faculty Economy and Business, Narotama University Surabaya Indonesia
Hening Widi Oetomo and Achmad Ridwan, Faculty Economy and Business, SIESIA Surabaya Indonesia
Dani Harmanto, Faculty of engineering and technology, University of Derby, UK
Talib bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia
ID 424 Airport, Passenger and Aircraft supporting to Regional Growth
Muhammad Ikhsan Setiawan, Department of Civil Engineering, Narotama University, Surabaya, Indonesia
Agus Sukoco, Department of Management, Narotama University, Surabaya, Indonesia
Paisal Halim, Institut Ilmu Sosial dan Manajemen STIAMI, Jakarta, Indonesia
Dani Hermanto, Faculty of Engineering and Technology, University of Derby, UK
Abdul Talib Bin Bon, Mohd Haziman Wan Ibrahim, Mohd Adib Mohammad Razi, Norzila Binti Othman, Mohd Irwan Bin Juki, Ahmad Zurisman Bin Mohd Ali and Wahyu Mulyo Utomo, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia
ID 425 Business Analytics Maturity Models: A Systematic Review of Literature
Kaveesha Ariyarathna and Suren Peter, Department of Industrial Management, University of Kelaniya, Sri Lanka
ID 426 Work-related Factors affecting the Sustained Attention among Production Workers in a Pharmaceutical Company in the Philippines
Charlene Cariaga, Alyza Marie D. Tolentino, August Adrian A. Castor, Khenn S. Arista, John Nathanoj A. Basilio and Yoshiki B. Kurata, Department of Industrial Engineering, Technological Institute of the Philippines, Quezon City, Philippines
ID 427 Impact of variation orders occurrence in construction: A case study of Polokwane, Limpopo Province
Pfumelani Malulekea, Clinton Aigbavboab and Wellington Thwalac, Department of construction management and Quantity surveying, University of Johannesburg, Johannesburg, South Africa
ID 428 The Paths From Service Quality Dimensions To Customer Loyalty: An Application On Sri Lankan Supermarket Customers
M. T. Dimantha Jayasanka and L. H. T. De. S. Wickramasuriya, Department of Decision Sciences, University of Sri Jayawardenepura, Gangodawila, Nugegoda, Sri Lanka
ID 429 Feasibility Study On Proposed Micro Hydro Electrical Powerplant
Dr. Palakshappa K, PACE, Department of Civil Engineering, Visvesvaraya Technological University, Mangalore, 574153, INDIA
Mr. Rudresha N, PACE, Department of Mechanical Engineering, Visvesvaraya Technological University, Mangalore, 574153, India
Dr. Vijay Kumar M, JSSATE, Department of Industrial Engineering & Management, Visvesvaraya Technological University, Bangalore, 560060, India
ID 437 Continuous Improvement to Create Value: Warehouse Management in a Telecommunications Company
José Vasconcelos Ferreira and Ana Luísa Ramos, GOVCOPP/Department of Economics, Management, Industrial Engineering and Tourism, University of Aveiro, Aveiro, Portugal
Adriana Ferreira Esteves, Department of Economics, Management, Industrial Engineering and Tourism, University of Aveiro, Aveiro, Portugal
ID 438 AMBHigh: A User Ergonomic Mobile Learning Application Intended for Business Management Secondary Students in the Philippines
Valerie B. Peralta, Jerran Del R. Mundo, Patrick James M. Palma, Bert Regin S. Santiago, Cohesir V. Sims, Francis I. Sulit and Yoshiki B. Kurata, Industrial Engineering Department, Technological Institute of the Philippines – Quezon City, Quezon City, Philippines
ID 439 A Critical review about performance management in education systems: Case of Morocco
Hind Benlhabib and Abdelaziz Berrado, Equipe AMIPS, Ecole Mohammadia d’Ingénieurs, Mohammed V University of Rabat, Morocco
ID 440 Solar Powered Plane
Syed Sharjeel Imam, Sapienza University of Rome, Rome, Italy
Mohammad Sadiq Saeed, Department of Civil Engineering, ZHCET, Aligarh Muslim University, Aligarh, India
Mohammad Asim, Department of Electrical Engineering, Integral University, Lucknow, India
ID 441 Techno-Commercial and Feasibility Analysis of Energy Efficient Solar Powered Technologies for Indian Scenarios
Ganeshan Subramanian & Aimen Sudhir, Production Engineering Department, Veermata Jijabai Technological Institute, Matunga, Mumbai 400019, India
Mandar Tendolkar, Mechanical Engineering Department, Veermata Jijabai Technological Institute, Matunga, Mumbai 400019, India
ID 442 A strategic relationship building through procurement 4.0: An analysis from the apparel industry
P. M. D. Rasanjani, W. W. N. Sachini, G. A. S. Sandamali and W. M. S. K. Weerabahu, Department of Industrial Management, Faculty of Science, University of Kelaniya, SriLanka
ID 446 Approaches to Catering to Variability in Demand Fulfillment in a First Mile Logistics Network
Sanchita Das, Amit Gahlawat and Sarvartha Kanchan
ID 447 Evaluation of Fertilization Storage System Considering Seasonal Demand using Discrete Event Simulation
Nurhadi Siswanto, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, 60111, Indonesia
ID 448 Investigating curriculum transformation pathways in technological planning schools: Learning from conventional planning programmes and beyond
Trynos Gumbo, University of Johannesburg, Department of Town and Regional planning, Office 6062, Sixth Floor, John Orr Building, Beit and Siemert Street, 2028. Johannesburg, South Africa
Brightnes Risimati, University of Johannesburg, Department of Quality and Operations Management, Auckland Park Bunting Road Campus, Johannesburg, South Africa
Emaculate Ingwani, University of Venda, Department of Urban and Regional Planning, Thohoyandou, 0950, Thohoyandou, South Africa
ID 449 Exploring the efficacy of blended learning and innovative assessments in town planning students at the University of Johannesburg
Trynos Gumbo, University of Johannesburg, Department of Town and Regional planning, Johannesburg, South Africa
Siphiwe Given Mbatha, University of Johannesburg, Department of Quality and Operations Management
Auckland Park Bunting Road Campus, Johannesburg, South Africa
Emaculate Ingwani, University of Venda, Department of Urban and Regional Planning
Thohoyandou, South Africa
ID 450 A Managerial Challenge: Selecting an appropriate model for implementing the Corrosion Management System, Case Study: National Iranian Gas Company
Ali Massaeli, Corrosion Management System Project Manager, Technical Inspection and Control Department, National Iranian Gas Company, Tehran, Iran
Reza Mesgarian, Head of Process Engineering, Coordination and Production Monitoring Department, National Iranian Gas Company, Tehran, Iran
ID 451 Re-Designing a Gear Using Reverse Engineering
Hoor Alhafeiti, Aiman Ziout, Athari Alsaadiya & Asma Alhebsi, Department of Mechanical Engineering, United Arab Emirates University, Alain, UAE
ID 452 Municipal solid waste collection and disposal using traveling salesman problem: A Review
Ezugwu Loveth Anaezi and Stephen C. Nwanya, Department of Mechanical Engineering, University of Nigeria Nsukka, Nigeria
Paul A. Ozor, Department of Quality and Operations Management, University of Johannesburg, South Africa
Department of Mechanical Engineering, University of Nigeria Nsukka, Nigeria
ID 453 Developing a Planning Model for Supplying First Aid Medicine after Cyclone in Southwest Coastal Areas of Bangladesh
Tamanna Islam and Salim Hossain, Department of Industrial and Production Engineering, Khulna University of Engineering & Technology, Dhaka, Bangladesh
ID 454 Multi-objective Optimization of Dynamic Electricity Generation-mix with CO2 Reduction Target: A Case Study of South Africa
Zakaria Yahia and Pule Kholopane, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
ID 455 Multi-objective Preemptive Optimization of Residential Load Scheduling Problem Under Price and CO2 Signals
Zakaria Yahia and Anup Pradhan, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, Soutsh Africa
ID 456 TAKA News Search Engine: A Proposed DEMO-based Performance Evaluation System
Tarek Fatyani, R&D Department, SMAGROUP LLC, Chiba, Japan
Zakaria Yahia, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
ID 457 A Study of Workforce Assignment Problem in Lean Factory on Machine Tool Industry
JrJung Lyu, Ching-Hsiang Tung, and Chia-Wen Chen, Department of Industrial and Information Management, National Cheng Kung University, Tainan, Taiwan
ID 458 Work Organization through Methods Engineering and Time Study to Increase Productivity in a Floriculture Company: A Case Study
Carlos A. Machado Orges, Leandro L. Lorente Leyva and Juan C. Mugmal Iles, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
Juan P. Tafur Guisao, Escuela de Ciencias Químicas e Ingeniería, Universidad Yachay Tech, Urcuquí, Ecuador
Ivet Challenger Pérez, Facultad de Ingeniería Informática y Matemática, Universidad de Holguín, Cuba
ID 459 On Applying Big Data to Transform the Inspection Lines
JrJung Lyu, Chia-Wen Chen, and Hong Yu Chen, Department of Industrial and Information Management, National Cheng Kung University, Tainan, Taiwan (R.O.C.)
ID 464 Reducing Screen Printing Lead Time: A Quality Control Circle Approach
Md. Mamunur Rashid and Sharif Ahmed, Department of Industrial & Production Engineering, Department of Yarn Engineering, Bangladesh University of Textiles, Dhaka-1208, Bangladesh
ID 465 Academic – Industry Partnership to Develop Tomorrow’s Engineering Innovators
Carol S. Gattis, Ph.D., Associate Dean Emeritus, Honors College, Adjunct Associate Professor, Industrial Engineering, University of Arkansas, Fayetteville, AR 72701, USA
Karl D. Schubert, Ph.D., FIET, Research Professor, College of Engineering, Director of Research for Innovation and Data Science Initiatives for the College of Engineering and the Sam M. Walton College of Business, University of Arkansas, Fayetteville, AR 72701
Michele Cleary, Evaluation and Reporting Consultant, Cleary Scientific Intelligence, LLC, Minneapolis, MN 55410
ID 466 Development of Post-Consumer Polymer Suppliers
Andrés R. Cruz Herrera, Jeanette del P. Ureña Aguirre and Leandro L. Lorente Leyva, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
ID 467 Optimal Control Applied to an Economic Model for Reducing Unemployment Problems in Bangladesh
Md. Haider Ali Biswas, Uzzwal Kumar Mallick, Mst. Shanta Khatun, Mathematics Discipline, Khulna University, Khulna-9208, Bangladesh
Kazi Masum Parves, Joint Director, Bangladesh Bank, Khulna, Bangladesh
ID 468 Implementation of Green Supply Chain Management (Gscm) Practices among Malaysian Smes
Alina Shamsuddin and Eta Wahab, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor, Malaysia
ID 469 An Interactive Analytic Hierarchy Process for Product Recommendation: A Case Study in Studio Recording
Sudatip Puengrusme, Stamford International University, Bangkok 10110, Thailand
Udom Janjarassuk, Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang, Bangkok 10520, Thailand
ID 470 Effects of Working Environment and Stress on Sick Building Syndrome among Manufacturing Employees
Nor Hazana Abdullah, Eta Wahab, Alina Shamsuddin and Nor Aziati Abdul Hamid, Faculty of Technology Management, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor 86400 MALAYSIA
ID 471 A Strategic Model to Improve the Last mile delivery performance in Ecommerce Parcel Delivery
Gayani Bopage, Julian Nanayakkara and Kasuni Vidanagamachchi, Department of Industrial Management, Faculty of Science, University of Kelaniya, Sri Lanka
ID 472 Modeling and Assessment of Carbon Dioxide Concentration Emitted from the Coal-based Power Plant in Bangladesh
Arindam Kumar Paul and M. Haider Ali Biswas, Mathematics Discipline, Khulna University, Khulna-9208, Bangladesh
ID 473 Analysis Of Designing Job Shop Scheduling In Pt. Harmony Of Four Selaras With Tabu Search Algorithm Method To Minimize Production Makespan
Lina Gozali, Lilyana Jap, Meisya Anggriani Halim, Industrial Engineering Department, Faculty of Engineering, Universitas Tarumanagara, Jakarta, 11440, Indonesia
ID 475 Influence of the type of Pipeline Integrity Assessment on the effectiveness of repairs
Benmounah Amar, Department of Transport and Equipment of Hydrocarbons, University Mhamed Bougara Boumerdas 35000. Algeria
ID 476 Applications of Nanoparticles via Laser Ablation in Liquids: a review
Fawaz M. Abdullah, Abdulrahman M. Al-Ahmari, and Saied Darwish, Industrial Engineering Department, King Saud University, Riyadh, 11421, KSA
Madiha Rafaqat, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, Pakistan
ID 477 Recycling Enhancement Efforts Using Mobile Application: Novel Approach in Penang, Malaysia
Prashanth Beleya, Geetha Veerappan, Tan Zheyan and Poh Chia Ming, Universiti Tunku Abdul Rahman, Malaysia
ID 478 Performance Evaluation of Integrated Moisture Sensor with ZigBee Mesh Network for Automated Irrigation System
Che Zalina Zulkifli, Nursyahida Mohd Noor and Nur Hazlina Abu Hassan, Computing Department, Sultan Idris Education University, Perak, Malaysia
ID 479 Factors Influencing Knowledge Transfer activities in Enterprise Resource Planning Success for Food Manufacturing
Nur Izzah Muallah, A.H. Nor Aziati, T. Rosmaini, A. Nor Hazana and S.W. Chan, Faculty of Technology Management & Business, University of Tun Hussein Onn Malaysia, 86400, Parit Raja, Johor, Malaysia
ID 480 Incorporating Dynamic Potential market in Innovation Diffusion Model Using Stochastic Differential Equation
Kuldeep Chaudhary and Pradeep Kumar, Department of Applied Mathematics, Amity Institute of Applied Sciences, Amity University, Noida, 201301, India
Sunita Mehta, Department of Mathematics, Kalindi College, University of Delhi, India
ID 487 Innovative Undergraduate Degree Programs in Data Science and Business Analytics
Shahram Taj, Florida Polytechnic University, Lakeland, Florida, United States
ID 488 The Design Of Hybrid Flowshop Scheduling System With Nawaz Enscore Ham (Neh) And Campbell Dudek Smith (Cds) Algorithm To Minimize Makespan In Pt. Plasindo Elok
Liesly Liesly, Lina Gozali, and Lilyana, Department of Industrial Engineering, Tarumanagara University, Jakarta, Indonesia
ID 489 State of Model Risk: A Comprehensive Review of Model Validation and Model Risk Management Approaches in the Age of Machine
Murphy Choy, Edinburgh Business School, Heriot Watt University
Ma Nang Laik, School of Business, Singapore University of Social Science, Singapore
ID 490 Stochastic Analysis of a Three Unit Series Parallel System
Venkata S S Yadavalli, Department of Industrial & Systems Engineering, University of Pretoria, Pretoria, South Africa
ID 491 Sustainable Construction through the Application of Lean Principles
Mary Yrene B. Paguio, ChE, OD, MS Industrial Engineering & Management Student, PUP, Philippines
ID 492 Sustainable Model Impact of Reclamation in Coastal North Jakarta (Case Study: A Fishing Village in Kamal Muara, Penjaringan)
Lilyana, Naufal Sanca L, Lina Gozali, Teuku Yuri M Zagloel and Tri Edhi Budhi Soesilo, Tarumanagara University, Jakarta, Indonesia
ID 493 Value-at-Risk and Modofied Value-at-Risk under Asset Liability by Using Time Series Approach
Sukono, Betty Subartini and Herlina Napitupulu, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Yuyun Hidayat, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Adam Sukma Putra, Department of Physics, Faculty of Mathematics and Natural Sciences, Universitas Gajah Mada, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 494 Reinsurance Loss Model at Individual Risk for Short Term in Life Insurance
Sukono, Endang Soeryana Hasbullah and Alit Kartiwa, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Yuyun Hidayat, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Subiyanto, Department of Marine Science, Faculty of Fishery and Marine Science, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 495 A New 3-D Chaotic System with Three Nonlinearities, its Adaptive Synchronization and Circuit Simulation
Aceng Sambas, Department of Mechanical Engineering, Universitas Muhammadiyah Tasikmalaya, Tasikmalaya, Indonesia
Sundarapandian Vaidyanathan, Research and Development Centre, Vel Tech University, Chennai, Tamil Nadu, India
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Subiyanto, Department of Marine Science, Universitas Padjadjaran, Indonesia
Mustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Kuala Terengganu, Malaysia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 496 A New 4-D Hyperchaotic System with a Two-Scroll Attractor, its Adaptive Control and Circuit Simulation
Sukono F, Department of Mathemetics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran Bandung Jawa Barat, Indonesia
ID 497 Numerical Simulation of Finite Difference Time Domain (FDTD) for Solving the Boundary Value Problem (BVP) in Earth Layer
Adam Sukma Putra, Idham Syah Alam, Department of Physics, Faculty of Mathematics and Natural Sciences, Universitas Gajah Mada, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Wahyu Srigutomo, Department of Physics, Faculty of Mathematics and Natural Sciences, Bandung Institute of Technology, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 498 The Application of Floyd-Warshall Algorithm in Solving Shortest Path Problem for Fire Evacuation System at High Rise Building (Case Study at eL Royale Hotel Bandung)
Sukono F, Department of Mathemetics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran Bandung Jawa Barat, Indonesia
ID 499 Regional Lagging Analysis in Indonesia Using Binary Logistic Regression
Titi Purwandari and Yuyun Hidayat, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Sukono and Herlina Napitupulu, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 500 Profile of West Java Province Based on School Participation Rate Using Biplot’s Principal Component Analysis
Titi Purwandari and Yuyun Hidayat, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Sukono and Herlina Napitupulu, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 501 Identification of Countries that Have Similarities with Indonesia in the Context of Rice Crisis Using Multidimensional Scaling
Titi Purwandari and Yuyun Hidayat, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Sukono and Herlina Napitupulu, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 502 Grouping of Regencies and Cities in West Java Using the Biplot’s Principal Component Analysis
Yuyun Hidayat and Titi Purwandari, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Sukono and Herlina Napitupulu, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 503 Listing all potential maximal cliques of a graph
Mochamad Suyudi and Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Mustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Tembila Campus, 2200 Besut, Terengganu, Malaysia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Johor, Malaysia
ID 504 Eigenvalues and the max-cut problem
Mochamad Suyudi and Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Mustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Tembila Campus, 2200 Besut, Terengganu, Malaysia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Johor, Malaysia
ID 507 New Ordering Approach Specific Airline Industry
Redemtor V. Cariño, Master of Science in Industrial Engineering Management, Polytechnic University of the Philippines
ID 508 The Identification of Material Management Risk Factors Affecting to The Time Performance in Fly Over Project Construction
Hafnidar A. Rani and Tamalkhani Syammaun, Civil Engineering Department, Faculty of Engineering, Universitas Muhammadiyah Aceh, Banda Aceh, Aceh, Indonesia
ID 509 Problems of demand and effects in portfolio based selection of utility functions
Riaman, Sukono and Eman Lesmana, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 513 Successful Implementation of Separate Layer Steam Injection to Enhance Oil Production from Comingle Layers- FNE-28 Case Study
Husham A. Ali Elbaloula Petro-Energy E&P, Dr. Tagwa A. Musa –Sudan University of Science & Technology, Luo Shengyong – GWDC
ID 514 Comparing Products and (Medical) Services on Few Organizational Variables: A Theoretical Framework
Dr. Sheela R Sharma, Rama Medical College, Mandhana, Kanpur, India
Prof. RRK Sharma and Ajay Jha, Dept of IME, IIT Kanpur, Kanpur, India
ID 515 Management Control Systems (MCS) in Hospitals
Dr. Sheela R Sharma, Rama Medical College, Mandhana, Kanpur, India
Prof. RRK Sharma and Ajay Jha, Dept of IME, IIT Kanpur, Kanpur, India
ID 516 ERP For Service Sector And Medical Service
Dr. Sheela R Sharma, Rama Medical College, Mandhana, Kanpur, India
Ajay Jha and Prof. RRK Sharma, Dept of IME, IIT Kanpur, Kanpur, India
ID 517 Multi Agent System For Hospitals
Dr. Sheela R Sharma, Rama Medical College, Mandhana, Kanpur, India
Ajay Jha and Prof. RRK Sharma, Dept of IME, IIT Kanpur, Kanpur, India
ID 518 Literature review of Dynamic Vehicle Routing Problem and future perspectives
Kaadiri Yahia and Omar Drissi Kaitouni, Engineering, Management and Systems’ optimization Laboratory, Mohammadia School of Engineers, Avenue Ibn Sina B.P 765, Agdal -Rabat
ID 521 Data Screening Technique for Developing a Crude Oil Price Forecasting Models for Petroleum Industry
Abdul Talib Bon and Nuhu Isah, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Parit Raja, Batu Pahat, Malaysia
ID 522 ASEAN 2025 and KM Approach to Improve Business Lawyer Competency: A Case Study of Chiang Mai University
Chayamarnie Bhiriyawanit, Worawit Janchai, Pitipong Yodmongkol and Anurak Panyanuwat, College of Arts, Media, and Technology, Chiang Mai University, Muang, Chiang Mai, 50200, Thailand
ID 523 Strategy for Developing MSMEs Performance Using Balanced Scorecard Model Measurement Based on Information Technology
Achmad Zakki Falani, Department of Informatic Engineering, Narotama University, Surabaya, East Java, Indonesia
Arasy Alimudin and Elok Damayanti, Department of Management, Narotama University, Surabaya, East Java, Indonesia
Abdul Talib Bon, Department of Production and Operation Management, Universiti Tun Hussein Onn, Parit Raja, Johor, Malaysia
ID 524 Optimal Investment Timing and Liquidity
Michi Nishihara, Graduate School of Economics, Osaka University, Osaka, Japan
ID 525 Controlling Schedule of Fiber to the Home (FTTH) Project Using Critical Path and Crashing Method
Catur Fajri Augyhana, Ika Arum Puspita and Wawan Tripiawan, Industrial Engineering, Industrial and System Engineering Faculty, Telkom University, Bandung, 40257, ID
ID 526 A Principal Criteria Searching Approach Based Leanness Assessment Method Considering Industrial Diversity
Geng Cui, Fei Xie and Cunrong Li, Department of Industrial Engineering, School of Mechanical and Electronics Engineering, Wuhan University of Technology
ID 527 Organizational Readiness to Change in Research Institute Case Studies
Mia Rahma Romadona, Research Center for Development of Science and Technology, Indonesian Institute of Sciences, Jakarta, Indonesia
ID 530 A New Metaheuristics for Solving Traveling Salesman Problem: Partial Comparison Optimization
Antono Adhi, Industrial Engineering Department, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia,
Industrial Engineering Department, Universitas Stikubank, Semarang, Indonesia
Budi Santosa and Nurhadi Siswanto, Industrial Engineering Department, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
ID 531 A Strategic Model to Improve the Last Mile Delivery Performance in E-commerce Parcel Delivery
Gayani Bopage, Julian Nanayakkara and Kasuni Vidanagamachchi, Department of Industrial Management, Faculty of Science, University of Kelaniya, Sri Lanka
ID 533 Application of ECRS Technique to Reduce Waste in Case of Detergent Packaging Process
Noppadol Sriputtha, Production Engineering Program, Faculty of Engineering, Thai-Nichi Institute of Technology, Bangkok 10250, Thailand Jittanan Kositwat, Production Staff, Production Department, Lion Corporation (Thailand) Limited, Chonburi, Thailand
ID 534 Role of IOT and Big Data Science in Reusable Packaging Logistics Optimization
Bryan Jay Capistrano, Polytechnic University of the Philippines, Manila NCR, Philippines
ID 535 The Completeness of p-Summable Sequences as 2-Normed Spaces
Muhammad Ryan Sanusi, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Bandung, Indonesia
Shelvi Ekariani and Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Bandung, Indonesia
Subiyanto, Department of Marine, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Bandung, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 536 Application of Spatial Weighting Matrix of GSTAR by Using CLARANS Clustering on Farmer Exchange Rates in 32 Provinces in Indonesia
Annisa Azizah, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Rini Cahyandari and Arief Fatchul Huda, Department of Mathematics, Faculty of Science and Technology, Universitas Islam Negeri Sunan Gunung Djati Bandung, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Subiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 537 Application of Graph Hamilton on Determining the Shortest Route of Trans Metro Bandung
Yusuf Ibrahim Abdallah, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Yani Ramdani and Yurika Permanasari, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Islam Bandung, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Subiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 538 The LASSO (Least Absolute Shrinkage and Selection Operator) Method to Predict Indonesian Foreign Exchange Deposit Data
Trisha Magdalena Adelheid Januaviani, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran , Bandung, Indonesia
Nurul Gusriani, Khafsah Joebaedi and Sukono, Department Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Bandung, Indonesia
Subiyanto, Department of Marine Science, Faculty of Fishery and Marine Science, Universitas Padjadjaran, Bandung, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 539 Analysis Students Abilities in Completing Mathematical Problems Dimension Three in Junior High School
Rahmi Wiganda Elastika, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Zulkarnain, Mefa Indriati and Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Subiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 540 Developing MSMEs’ Businesses Performance Using Balanced Scorecard Model Measurement Based on Information Technology
Achmad Zakki Falani, Faculty of Informatic Engineering, Narotama University, Surabaya, Indonesia
Arasy Alimudin, Agus Sukoco and Elok Damayanti, Faculty Economy and Business, Narotama University, Surabaya, Indonesia
Abdul Talib Bon, Fakulti Pengurusan Teknologi dan Perniagaan, Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia
ID 541 100% Reduction Of Ogp Inspection Waiting Time At Xyz Electronics Corporation Using Monte Carlo Simulation, Heijunka Device And Military 105e Sampling Standard
Mary Rose O. Arnejo, Department of Industrial Engineering, Cebu Institute of Technology – University, Cebu City, Philippines
ID 542 A Critical Review on the Drivers and Barriers for Enabling Smart Cities
N.S. Jayasena, H. Mallawaarachchi and K.G.A.S. Waidyasekara, Department of Building Economics, University of Moratuwa, Sri Lanka
ID 543 Strategies to Adopt Zero Waste Concept in the Construction Industry
K.L.A.K.T. Liyanage, K.G.A.S. Waidyasekara and H. Mallawarachchi, Department of Building Economics, Univesity of Moratuwa, Sri Lanka
ID 544 Performance Evaluation of Sustainable Innovation Practices in Food Supply Chain Using Best-Worst Method
Jyoti Darbari, Rashi Sharma and P.C. Jha, Department of Operational Research, University of Delhi, India
Venkata Seshachala Sarma Yadavalli, University of Pretoria, South Africa
ID 545 An Interpretive Structural Model for Analyzing the Impact of Sustainability Driven Supply Chain Strategies
Rahul Solanki and P.C. Jha, Department of Operational Research, University of Delhi, India
Jyoti Darbari, Department of Mathematics, Lady Shri Ram College, University of Delhi, India
Vernika Agarwal, Amity International Business School, Amiy University, Noida, Uttar Pradesh, India
ID 546 Waste Plastic Material As An Additional Material For Hollow Foundation Test Concrete
Sri Wiwoho Mudjanarko and Prastyo Adi Putro, Departement of Civil Engineering, Universitas Narotama, Surabaya,60117, Indonesia
Eko Julianto, Politeknik Perkapalan Negeri Surabaya, Surabaya, Indonesia
Dani Harmanto, Departement of Mechanical Engineering, Derby University, Derby, UK
Firdaus Pratama Wiwoho, Departement of Environmental Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, 60117, Indonesia
ID 547 Development of Food Safety Plan for Food Parks in the Philippines
Madonna F. Andrada, Rolph Fahad Christopher C. Bigtas and Manuel U. Ribo, Jr., School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila
ID 548 An Ergonomic Design of Birthing Chair for Public Maternity Hospitals in the Philippines
Rianina D. Borres and Angeli K. Javier, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila
ID 549 Ergonomic Design of NLEX Toll Booth in the Philippines
Jenalyn Shigella G. Yandug and Marvin L. Cruz, School of Industrial Engineering and Engineering Management, Mapua University, Muralla St., Intramuros, Manila
ID 550 Prioritization of Service Quality Dimensions towards Customer Retention for Casual-Dining Restaurants
Madylaine G. Delfin, Kenneth G. Tonico and Adrian Allan Barisoro, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila
ID 551 Predictive Model Affecting the Fatigue Condition of Drivers in the Philippines
Rianiña D. Borres and Joymie R. Javier, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila
ID 552 Development of Supply Chain Model for Small Scale FarmerProducers of the Carrageenan Industry in the Philippines
Mary Christy O. Mendoza and Raphael Joesh P. Layug, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila
ID 553 Effects of Internal and External Sources of Distraction to the Driving Performance of Filipino Drivers
Rex Aurelius C. Robielos and Ybeth Angelyn P. Tuliao, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila
ID 554 In-Depth Analysis of Workplace Accidents in Food Processing Company in the Philippines
Rex Aurelius C. Robielos, Kenn Redric P. Leyba and Charlene L. Ocampo, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila
ID 555 Good mechanism for better live
Gunawan Gunawan, Surabaya, Indonesia
ID 556 Analysis Using of Lean Manufacturing to Minimize Waste
Nurhayati Sembiring and Muhammad Irvan, Department of Industrial Engineering, Faculty of Engineering, Universitas Sumatera Utara, Sumatera Utara, Indonesia
ID 557 Cost Reduction in Case of Forklift’s Tire Replacement using VA/VE Technique
Noppadol Sriputtha, Production Engineering Program, Faculty of Engineering, Thai-Nichi Institute of Technology, Bangkok 10250, Thailand
Boonsin Nadondu, Facility and Layout Section, Nissan Trading (Thailand) Co., Ltd., Chonburi, Thailand
ID 558 Factors Affecting the Performance of Cold Chain for Export of Thailand’s Longan
Narathip Titlo, Graduate program in Logistics Engineering and Supply chain Management, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, Thailand
Apichart Sopadang, Department of Industrial Engineering, Excellence Center in Logistics and Supply Chain Management, Chiang Mai University, Chiang Mai, Thailand
ID 559 A Data Analytics Model of Bankability versus Economic Factors: East Java Region Case
Hana Aulia Diah Ramadhani and DR.Eng. Erwin Widodo. S.T., M.Eng., Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, 602111, Indonesia
ID 560 Performance Improvement of Shrimp Feed Raw Materials in Green Supply Chain
Juliza Hidayati, Department of Industrial Engineering, Faculty of Engineering, Universitas Sumatera Utara, Medan, Indonesia
Sawarni Hasibuan, Master of Industrial Engineering Program, Universitas Mercu Buana, Jakarta, Indonesia
ID 561 Integration of Contract and Spot Market Carrier under Demand Uncertainty
Lala Ayu Kantari, I Nyoman Pujawan and Niniet Indah Arvitrida, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya 60111, Indonesia
ID 562 Carbon Pricing as a Policy Instrument to Reduce Energy Based Emissions in Apparel Sector
T.L.W. Karunaratne and T.S. Jayawickrama, Department of Building Economics, University of Moratuwa, Sri Lanka
ID 563 Issues in Implementing Business Process Reengineering (BPR) Projects
M.F.F. Fasna & Sachie Gunatilake, Department of Building Economics, University of Moratuwa, Sri Lanka
ID 565 An Assessment for the Use of Green Building Information Modelling for Sustainable and Green Buildings – Sri Lankan Perspective
H.W.T. P. Rathnasiri and H.S. Jayasena, Deparment of Building Economics, University of Moratuwa , Sri Lanka
ID 566 Service Quality Improvement in Courier Service: Need for Lean Principles
N. Botsane, P.A. Ozor and Charles Mbohwa, Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa
ID 567 E-Toll Information Technology In Gto And Hybrid In Toll Gate Menanggal – Surabaya
Rachmatdhany Zyandra Aziz, Sri Wiwoho Mudjanarko, Atik Wahyuni and Hendro Sutowijoyo, Departement of Civil Engineering, Universitas Narotama, Surabaya,60117, Indonesia
Eko Julianto, Politeknik Perkapalan Negeri Surabaya, Surabaya, Indonesia
Slamet Winardi and Wahyu Mulyo Utomo, Departement of Computer System, Universitas Narotama, Surabaya,60117, Indonesia
Dani Harmanto, Departement of Mechanical Engineering, Derby University, Derby, UK
ID 568 A reverse logistics network optimization model for residual OTR tires from the mining industry: A Colombian case study
Jorge Oyola and René Amaya-Mier, Department of Industrial Engineering, Universidad del Norte, Barranquilla, Atlántico 081007, Colombia
ID 569 The Improvement of Technology Utilization in The Framework of the Competitiveness and Sustainability of Indonesia Palm Oil Industry
Sawarni Hasibuan, Master of Industrial Engineering Program, Universitas Mercu Buana, West Jakarta 11650, Indonesia
Juliza Hidayati, Department of Industrial Engineering, Faculty of Engineering, Universitas Sumatera Utara, Medan, Indonesia
ID 570 Integration of 360-degree Feedback Methods and AHP for Employee Performance Measurement
Much. Djunaidi, Virna S.D. Kumaraningrum, Indah Pratiwi, and Hafidh Munawir, Department of Industrial Engineering, Universitas Muhammadiyah Surakarta, Sukoharjo, Central Java, 57162, Indonesia
ID 571 Conflict Avoidance in Construction Stage through Proper Practice in Pre Contract Stage
Kanishka Kajaman, Vijitha Disaratna, Pavithra Ganeshu and Fathima Sabrina Nazeer, Department of Building Economics, University of Moratuwa, Sri Lanka
ID 572 Mathematical Modeling to Predict the Mechanical Properties of Hot Rolled Steel Sheets
Chaovarat Junpradub and Krisada Asawarungsaengkul, Department of Industrial Engineering, Faculty of Engineering, King Mongkut’s University of Technology North Bangkok, Thailand
ID 573 Combining SWOT and PESTLE Model to Assess Kaskus Business Model
Widhiyaningrum, Abel Kristanto Widodo, Moh. Rizal Tahqiqi, A.A.S. Manik and Mahachandra J.M., Departement of Industrial Engineering, Faculty of Engineering, Diponegoro University
ID 574 Development Sophistication Degree of New Components of Technometrics Using Concept Mapping
Novi Marlyana, Department of Industrial Engineering, Universitas Islam Sultan Agung, Semarang, Indonesia
Alva Edy Tontowi and Hari Agung Yuniarto, Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada, Yogyakarta, Indonesia
ID 575 The Impact of Green Supply Chain Management Practices on Operational Performance and Customer Satisfaction
H. K. Dilhani Mallikarathna and C. W. Chathurani Silva, Department of Decision Sciences, University of Sri Jayewardenepura, Gangodawila, Nugegoda, Sri Lanka
ID 576 Ability to Optimizing Shipping Line Operation using Information Technology- A Case Study in Sri Lanka
A.P Preethika Darshani, C.W. Chaturani Silva, Department of Decision Sciences, University of Sri Jayewardenepura, Nugegoda, Sri Lanka
ID 577 An Equity-based Positioning of Domestic Waste Collection Sites for an Equal Waste-induced Disaster Risk
Eko Setiawan, Much Djunaidi, Hafidh Munawir, Alfa Novian Hendranansa Putra, Praditsya Paramitha, Eliza Arrofi Maharani and Bella Brylian, Industrial Engineering Department, Universitas Muhammadiyah Surakarta, Sukoharjo, Central Java, Indonesia
ID 578 Internet of Things, Big Data and Simulation as a Competitive Advantage in the New Age of Industry 4.0
Rafaela Soares dos Santos and Sandro Alberto Vianna Lordelo, Anhanguera University Center, Rio de Janeiro, Brazil
ID 579 Using Petri Net method for assessing safety barriers performance Case study: Oil and Gas Industry
Mouloud Bourareche and Rachid Nait-Said, Institute of Health and Occupational Safety, Laboratory of Research in Industrial Prevention (LRIP), University of Batna, Algeria
ID 580 Multi-Product Multi-Vehicle Inventory Routing Problem with Mixed Integer Linear Programming
Ilyas Masudin, Zaiyin Maghfur and Dian Palupi Restuputri, Industrial Engineering, University of Muhammadiyah Malang, Jawa Timur 65144, Indonesia
Mudrifah, Accounting, University of Muhammadiyah Malang, Jl. Raya Tlogomas 246 Malang, Jawa Timur 65144, Indonesia
Fien Zulfikarijah, Management, University of Muhammadiyah Malang, Jl. Raya Tlogomas 246 Malang, Jawa Timur 65144, Indonesia
ID 581 Design and Development of Advanced Air Purifier Facial Mask
Md. Mamunur Rashid and Sadman Sakib Tushan, Department of Industrial & Production Engineering, Bangladesh University of Textiles, Dhaka-1208, Bangladesh
ID 582 Digital Human Modeling in Ergonomic Risk Assessment of Working Postures using RULA
M.Manzoor Hussain, Department of Mechanical Engineering, Jawaharlal Nehru Technological University, Hyderabad – 500085, Telangana State, INDIA
Qutubuddin S.M., Industrial and Production Engineering Department, P.D.A. College of Engineering, Gulbarga, Karnataka State, INDIA
ID 588 A Knowledge Management Approach to Compare and Develop the ASEAN University Credit Transfer System in Thailand
Chayamarnie Bhiriyawanit, Faculty of Law, Chiang Mai Univeristy, Muang, Chiang Mai, 50200, Thailand
ID 589 Industry 4.0 Gap Analysis for Thai Industries with Association Rules mining
Wimalin Laosiritaworn and Wichai Chattinnawat, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, 50200, Thailand
ID 590 The impact of late payments on the financial performance of a multi-echelon supply chain: a system dynamics modelling approach
Abdelaziz Berradou, Tarik Saikouk and Mohamed Hicham Salah Eddine, University of Rabat, Rabat, Morocco
ID 591 A Study Of Food Waste Behaviour In Tertiary Institution
Emy Ezura Bt. A. Jalil, Technology and Supply Chain Excellence Institute
Chong Wing Ying, Chang See Min and Loo Mei Chen, School of Technology Management and Logistics, College of Business, Universiti Utara Malaysia, Sintok, Kedah, Malaysia
ID 592 The Determination of Patient Appointment Scheduling and Patients’ Examination Room Assignment Policies: A Case Study
Ping-Shun Chen, Li-Wen Liu, Ching-Ping Zheng, Department of Industrial and Systems Engineering, Chung Yuan Christian University, Chung Li District, Taoyuan City, 32023, Taiwan, ROC
Wen-Tso Huang, Business School, Department of Financial Management, Minnan Normal University, Xiangcheng District, Zhangzhou City, 363000, China
ID 593 Implementation of Karakuri Kaizen to Improve Productivity and Ergonomics in Wire Rope Industry
Izzat Muhaimin Madisa, Mohd Firdaus Mohd Taib and Norba’ayah Ahmad Reza, Department of Materials, Manufacturing and Industrial Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia
ID 594 DEA-cross efficiency approach for peer assessment of retail stores’ efficiency
Nomita Pachar and P C Jha, Department of Operational Research, University of Delhi, Delhi, India
Anshu Gupta, University School of Management and Entrepreneurship (USME), East Delhi Campus, Delhi Technological University (DTU), Delhi, India
ID 596 The Impact of Waste Management in the Hospitality Industry Johannesburg North, South Africa
Dr E I Edoun, Professor C Mbohwa and Mrs Thobile Yvonne Bhila, Faculty of Engineering and the Built Environment, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa
ID 597 Application of Data Mining for Exploring Hidden Patterns in Tuberculosis Patients
Farzad Firouzi Jahantigh and Maryam Ostovare, Department of Industrial Engineering, University of Sistan and Baluchestan, Zahedan, Iran
ID 598 Factors Investigation for the Development of Medical Device towards Sustainable Product
Taisy Mak and Duangpun kritchanchai, Department of Industrial Engineering, Mahidol University, Salaya, Nakhon Pathom, 73170, Thailand
ID 599 Radio Frequency Identification Based Communication of Smart Grid with Advance Metering Infrastructure survey
Muhammad Nauman Sheikh, Department of Electrical Engineering, University College of Engineering and Technology (UCET), The Islamia University of Bahawalpur, Pakistan
ID 600 Analysis of new product development strategies between the green supply chain and non-green supply chain partners (case study: Doosheh Dairy Company)
Hadi Gholizadeh and Nikbakhsh Javadian, Department of Industrial Engineering Mazandaran University of Science and Technology, Babol, Iran
ID 601 Importance of Innovative Transformational Leadership on Employee Engagement in the Mining Industry
M. M. Manyuchi and A. Garg, Department of Management Sciences, School of Management Sciences, Tshwane University of Technology, South Africa
ID 602 Factors Influencing The Success And Failure Of Small And Medium-Sized Enterprises In Tembisa Township, South Africa
Dr E I Edoun, Professor C Mbohwa and Mrs Thobile Yvonne Bhila, Faculty of Engineering and the Built Environment, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa
ID 603 Engineering Education and Self Dependence: A Nigerian Experience
Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, South Africa
Paul A. Ozor, Department of Quality and Operations Management, University of Johannesburg, South Africa
Department of Mechanical Engineering-Industrial Engineering and Management, University of Nigeria Nsukka, Nigeria
ID 604 Detection & Diagnosis Of Malignancy By Laser Induced Fluorescence Spectra (LIF)
Mrs. Priya Sachin Deole, Department of physics, G.S.Tompe Art’s, Comm. & Science College,Chandur Bazar, Dist. Amravati (M.S) India
Mr. Nachiket Sachin Deole and Mrs. Manasi Vyankatesh Ghamande, Department of Engineering Sciences and Humanities, Savitribai Phule University, Pune, India
ID 605 Assessing the Effects of Sustainability Practices on Product Life Cycle- Clustering Approach
Abdul Salam Khan, NUST Business School, National University of Sciences and Technology, NUST, Islamabad
ID 606 Supply Chain Management of Facility Operations and Maintenance Function in Apparel Sector
F.N. Abdeen, Y.G. Sandanayake and T. Ramachandra, Department of Building Economics, University of Moratuwa, Sri Lanka
ID 607 Maintenance Scheduling and Optimization of Wind Parks: Models and Methods
Mahmood Shafiee, Department of Energy and Power, Cranfield University, Bedfordshire MK430AL, UK
ID 608 A Conceptual Framework to Optimise the Impact of Embodied Energy and Operational Energy in Buildings during the Design Stage
Tennakoon G.A, Waidyasekara K G.A.S and Ekanayake B.J, Department of Building Economics, University of Moratuwa, 10400, Moratuwa, Sri Lanka
ID 617 The Impact Of Customized Service And Guest Satisfaction In The Tourism And Hospitality Industry
Mrs Thobile Yvonne Bhila, Faculty of Engineering and the Built Environment, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa
ID 618 Relief Demand Modeling Using Bayesian Approach to Coordinate Humanitarian Logistics Planning
Mohammad Anwar Rahman, Central Connecticut State University, New Britain, Connecticut, USA
ID 619 The Effectiveness of Total Quality Management and Operations Performance at a Bakery Firm in The City of Tshwane, Pretoria South Africa
Syria Sibongile Chauke, EI Edoun and Charles Mbohwa, Quality and Operations Management, University of Johannesburg, RSA
ID 620 The Essence of Communication and Its Operationalisation On Managerial Effectiveness
Nkube Eva Masetlwa, EI Edoun and Mbohwa, Department of Quality and Operations Management, University of Johannesburg, South Africa
ID 621 The Essence of Total Quality Management Philosophies in Business
Sibongile Chauke, EI Edoun and Mbohwa, Quality and Operations Management, University of Johannesburg, South Africa
ID 622 Analyzing the Impact of Location Factors on Building Construction Cost in Sri Lanka
Thulasimaaran Parameswaran, T.S. Jayawickrama and D.G. Melagoda, Department of Building Economics, University of Moratuwa, Moratuwa, 10400, Sri Lanka
ID 623 Development of The P I N T A R Concept for Designing Core Competencies Using The Malcolm Baldrige Performance Excellence Approach The Description Analysis At Third Party Logistics Company
Sri Witjaksono Widiadibrata, Doctoral Management Program, Mercu Buana University, Jakarta, INDONESIA
ID 624 Classification of Bearing Fault Location and Severity Using Cascade ANNs with Statistical and Spectral Features
Punyisa Kuendee and Udom Janjarassuk, Department of Industrial Engineering, Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang, Bangkok, Thailand
ID 628 Forecasting at completion: Introduction of new method and comparing it with the method of Earned Schedule
Ali Maaleki, MSc Social & Economical engineering, NO 501, Enterance 3, Block 3, Baharan Complex, Av bayat, Shahr-e-rey, Tehran
Kaveh mohammad cyrus, Asistant Professor, Amirkabir university, Tehran, Iran
Davoud Gholamiangonabadi, Department of Industrial Engineering and Management Systems, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
ID 629 Feature Selection and Machine Learning Classification for Live P2P Traffic
Haitham A. Jamil, University of Elimam Elmahdi, Kosti, Sudan
Bushra M. Ali, University of Technology Malaysia, Johor, Malaysia
ID 630 Identification of Opinion Leadership: A Literature Review
L.M.B.N. Kolugala and H.S. Jayasena, Department of Building Economics, University of Moratuwa, Sri Lanka
ID 631 An Equity-based Positioning of Solid Waste Collection Sites for an Equitable Waste-induced Disaster Risk
Eko Setiawan, Much Djunaidi, Hafidh Munawir, Alfa Novian Hendranansa Putra, Praditsya Paramitha, Eliza Arrofi Maharani and Bella Brylian, Industrial Engineering Department, Universitas Muhammadiyah Surakarta, Sukoharjo, Central Java, Indonesia
ID 632 The Analysis of Pros and Norms of Outsourcing Logistics Operational Activities in the Construction Industry in South Africa
Katlego Frans Letsoko and Xhanti Dyonase, Department of Operations Management and Quality Assurance at the University of Johannesburg, South Africa
ID 633 Human Error Assessment in the Accident Causations Experienced among Vehicle Drivers in the Philippines
Gann Sebastian B. Quiban, Bryan D. Caventa, Patricia Paula H. Corpuz, Francesco Nicolai L. Datu, Rica Jonell A. Millet and Yoshiki B. Kurata, Department of Industrial Engineering, Technological Institute of the Philippines, Quezon City, Philippines
ID 634 Occupational Health and Issue in The Low Back Pain Among Filipino – Aged People Through Ordinal Logistic Regression
Angelo M. Alindogan, Felix John F. Amin, Nicole P. Clave, Queenie Colleen Guadalupe, Lynnette P. Salas, Ritz Jerard A. Tan, Arriane A. Palisoc and Yoshiki B. Kurata, Department of Industrial Engineering, Technological Institute of the Philippines, Quezon City, Philippines
ID 635 Conceptual Facebook Model to Mitigate the Problem of Obesity among Sudanese Females
Ghada Ahmad Abdelguiom, Information System Dept., Faculty Computing, UTM
Haitham A. Jamil, Faculty of Computer Science and Information Technology, University of Elimam Elmahdi, Kosti, White Nile, Sudan
ID 636 What are the factors affecting the successful implementation of Industrial engineering projects or the application of Industrial engineering tools and techniques in mining in a South African context?
Tafadzwa Chawasemerwa, University of Witwatersrand, South Africa
ID 637 Design an optimal doctor scheduling system
Tafadzwa Chawasemerwa, University of Witwatersrand, South Africa
ID 638 Competency Mapping for Managers in Governmental Organizations by Shannon entropy
Arash Namvar, M.Sc. Construction engineering and management, Amir Kabir University, Tehran, Iran
Ali Maaleki, M.Sc. Industrial Engineering, Amir Kabir University, Tehran, Iran
Farid Saeedi, M.Sc. Industrial Management, Persian Gulf University, Bushehr, Iran
ID 639 SMEs Managing Organisational Knowledge In The 4IR Era: A Case Study Of Developing Countries
Lawrance Seseni and Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, RSA
ID 640 Design Intervention in Maheshwar Handloom, MP, India
Pratik Mukesh, Master of Design, Design Discipline, PDPM Indian Institute of Information Technology, design and Manufacturing, Jabalpur, M.P., India
ID 641 Fleet management through Vehicle Routing Problem and Multi Depot Vehicle Scheduling Problem: A Literature Review
Ziyad bahou, Equipe MOAD6, Mohammadia School of Engineers, Mohammed V University of Rabat, Morocco
Jamal Elhachmi, Laboratory of Electronics and Telecommunications, Mohammadia School of Engineers (EMI), Rabat, Morocco
ID 642 Analysis of Student’s abilities in Completing Mathematical Problems Dimension Three in Junior High School
Rahmi Wiganda Elastika, Master Program in Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Zulkarnain, Department of Mathematics, Faculty of teacher training and science, Universitas Riau, Indonesia
Mefa Indriati, Department of Mathematics, Faculty of teacher training and science, Universitas Islam Riau, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Subiyanto, Department of Marine Sciences, Faculty of Fishery and Marine Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 643 Performance Assessment of Hardboard Material’s Supplier in PT. Nutech Pundi Artha using Analytic Network Process (ANP) Methods
Muhammad Kholil, Hendri and Farah Devina, Program Studi Teknik Industri, Fakultas Teknik, Universitas mercu Buana, Jl. Meruya Selatan No. 1 Kembangan, Jakarta Barat, Indonesia
ID 644 Production System Disturbances of Heavy Equipment Component Industry (Case Study at PT ABC)
Iveline Anne Marie, Pudji Astuti and Debbie Kemala Sari, Industrial Engineering Department, Faculty of Industrial Technology, Trisakti University Kampus, Jakarta Barat, Indonesia
ID 645 Property Rights on Existing Reconstruction and Development Program Houses (RDP)- Literature review
Mashwama Nokulunga, Gladness Makgobi and Thwala Didi, Department of Construction Management and Quantity Surveying, University of Johannesburg/Johannesburg, South Africa
SARChI in Sustainable Construction Management and Leadership in the Built Environment, Faculty of Engineering and the Built Environment, University of Johannesburg/ Johannesburg, South Africa
ID 650 Big Data Issues and Processing Techniques: A Comprehensive Survey
Aisha Shabbir, Kamalrulnizam Abu Bakar, Raja Zahilah Raja Mohd. Radzi and Sulaiman Azeem, University Technology Malaysia
ID 651 Theoretical examination of sustainability on low cost affordable housing and corporate governance
Mashwama Nokulunga, Gladness Makgobi and Aigbavboa Clinton, Department of Construction Management and Quantity Surveying, University of Johannesburg/Johannesburg, South Africa
SARChI in Sustainable Construction Management and Leadership in the Built Environment, Faculty of Engineering and the Built Environment, University of Johannesburg/ Johannesburg, South Africa
ID 652 Pilot Study: Organizational Creativity in Indonesia’s Creative Industries
Budi Hartono and Subagyo, Mechanical and Industrial Engineering Department, Gadjah Mada University, Yogyakarta, Indonesia
Retno Indriartiningtias, Industrial Engineering Department, Trunojoyo University, Bangkalan, East Java, Indonesia
Doctoral Student in Mechanical and Industrial Engineering Department, Gadjah Mada University, Yogyakarta, Indonesia
ID 653 Semiconductor’s Automotive Burn-in Testing Improvement by Using Six Sigma
Norzima Zulkifli and Haresh Kumar Shanmugam, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia
ID 654 Optimization Model to Enhance the Petroleum Distribution Network in Sri Lanka
W.W.N. Sachini, W.M.S.K. Weerabahu and R. Wickramarchchi, Department of Industrial Management, University of Kelaniya, Sri Lanka
ID 655 Newsvendor Models and Biases under Ambiguity
Peeyush Mehta, Indian Institute of Management Calcutta, Operations Management Group, Kolkata, India – 700104
R K Amit, Indian Institute of Technology Madras, Dept. of Management Studies, Chennai
ID 656 Perceptions and Career Choices Linked to the UAE Youths Entrepreneurial Intention
Fauzia Jabeen, Abu Dhabi, University Abu Dhabi, United Arab Emirates
ID 657 Expansion Tale of Al Fanar Restaurant
Fauzia Jabeen, Abu Dhabi University, Abu Dhabi, United Arab Emirates
ID 658 Model-Based Engineering of a Process Wash Plant using SysML: Case study of beneficiation processes in a phosphate industry
Mariem, Ait Bakader Usmba Khouribga, Morocco
ID 659 Analysis of Inventory Control Planning for P-200 Chip (Semi Dull) Using Material Requirement Planning (MRP) Method at Pt. Indonesia Toray Sinthetic
Hendri Hendri, Universitas Mercu Buana, Jakarta Barat, Indonesia
Muhammad Kholil, Universitas Mercu Buana, Jakarta Indonesia
Saiful Munajat, Program Studi Teknik, Industri Fakultas Teknik, Universitas Mercu Buana, Jakarta Barat, Indonesia
ID 660 Gorelax: A User-Ergonomically Designed Backpack for Stress Prone Millennials in the Philippines
Ryan Christopher Malicdem, Technological Institute of the Philippines, Quezon City, Philippines
Chrisjohn Paul Angelo Reyes, Technological Institute of the Philippines, Quezon City, Philippines
Angel Joy Quizon, Technological Institute of the Philippines, Quezon City, Philippines
Yoshiki Kurata, Technological Institute of the Philippines, Quezon City, Philippines
ID 661 Role of Tourism IT Adoption and Tourism Risk Management Orientation On Collaborative Assets: Implications for Sustainable Tourism Supply Chain Performance
Santanu Mandal, Amrita School of Business, Amrita Vishwa Vidyapeetham, Coimbatore, India
ID 662 Influence of IOS Appropriation in Tourism Agility and Tourism Resilience Development: An Empirical Study
Santanu Mandal, Amrita School of Business, Amrita Vishwa Vidyapeetham, Coimbatore, India
ID 663 Advancement of Life Cycle Assessment Towards Eco-design In Ceramic Floor Tile Industry In Sri Lanka
Kamalakkannan Sivappirakasam, University of Peradeniya, Faculty of Engineering Peradeniya, Sri Lanka
ID 664 Academic – Industry Partnership to Develop Tomorrow’s Engineering Innovators
Carol Gattis, University of Arkansas, Fayetteville, United States
ID 665 Big Data Tasks Execution Time Analysis Using Machine Learning Techniques
Aisha Shabbir, University Technology Malaysia, skudai, Malaysia
Kamalrulnizam Abu Bakar, skudai, Malaysia
Raja Zahilah Raja Mohd. Radzi, skudai, Malaysia
Muhammad Siraj, Department of Information Engineering & Computer Science, University of Trento, Trento, Italy
ID 666 Analysing the Pros and Norms of Outsourcing Logistics Operational Activities in Construction in South Africa
Katlego Letsoko and Xhanti Dyonase, University of Johannesburg, Johannesburg, South Africa
ID 667 Vertical Wind Turbines as Power Plants at the Railroad Tracks
Andreas Arga Pembangunan Nasional Veteran Jakarta University Bogor Indonesia 667
ID 668 Formulating a Strategic Management of Social E-Commerce through a Combination of SWOT and PESTLE Analysis : Case Study
Abel Kristanto Widodo, Universitas Diponegoro, Semarang, Indonesia
Widhiyaningrum, Diponegoro University, Semarang, Indonesia
Moh Rizal Tahqiqi, Diponegoro University, Semarang, Indonesia
A.A.S. Manik Mahachandra J.M., Diponegoro University, Semarang, Indonesia
ID 669 Application of Spatial Weighting Matrix of GSTAR by Using CLARANS Clustering on Farmer Exchange Rates in 32 Provinces in Indonesia
Annisa Azizah, Universitas Padjadjaran, Sumedang, Indonesia
Rini Cahyandari, Universitas Islam Negeri Sunan Gunung Djati Bandung, Bandung, Indonesia
Arief Fatchul Huda, Universitas Islam Negeri Sunan Gunung Djati Bandung, Bandung, Indonesia
Sukono F, Department of Mathemetics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Bandung, Indonesia
Subiyanto Subiyanto, Universitas Padjadjaran, Sumedang, Indonesia
Abdul Talib, Bon Universiti Tun Hussein Onn Malaysia, Batu Pahat, Malaysia
ID 670 The LASSO (Least Absolute Shrinkage and Selection Operator) Method to Predict Indonesian Foreign Exchange Deposit Data
Trisha Magdalena, Adelheid Januaviani, Nurul Gusriani, Khafsah Joebaedi, Sukono F and Subiyanto Subiyanto, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Batu Pahat, Malaysia
ID 671 Evaluation of Redesign Layout Using Discrete Event Simulation (DES) Oral
Zakka Ugih Rizqi, Islamic University of Indonesia, Yogyakarta, Indonesia
Rachmat Aulia, Islamic University of Indonesia, Sleman Indonesia 671
ID 672 Lean Manufacturing and Ergonomics in the metallurgical industry: an integrated approach for performance improvement
Ana Luísa Ramos, University of Aveiro (DEGEIT/GOVCOPP), Aveiro, Portugal
Marlene Brito, DEGEIT University of Aveiro, Aveiro, Portugal
Paula Carneiro, University of Minho (ALGORITMI Centre of Engineering), Braga, Portugal
Maria Antónia Gonçalves, Polytechnic of Porto – Research Center of Mechanical Engineering (CIDEM), Porto, Portugal
ID 673 AMBHigh: A User Ergonomic Mobile Learning Application Intended for Business Management Secondary Students in the Philippines
Bert Regin, Santiago Technological Institute of the Philippines, Quezon City, Philippines
ID 674 Heuristics for Course Planning in Degree Programs
Kingsley Gnanendran University of Scranton Scranton United States
Manohar Madan University of Wisconsin-Whitewater Whitewater United States
ID 675 Supply Chain Strategy for Ayamas Food Cooperation Sdn. Bhd.
Mohd Effendi Amran and Habibah Norehan Binti Haron, Razak Faculty of Technology and Informatics, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia
ID 677 Management of Waste Water in Meat Processing Sector: Case Study of Ekurhuleni Abattoir in Johannesburg
Victor Msimango, Paul Amaechi Ozor and Charles Mbohwa, Department of Quality and Operations Management, Faculty of Engineering and the Built Enviroment, University of Johannesburg, South Africa
Paul Amaechi Ozor, Department of Mechanical Engineering, Faculty of Engineering, University of Nigeria Nsukka, Nigeria
ID 678 Red Bin Analysis – The Art of Problem Solving in Manufacturing Industry
Sumit Shandilya and Jaskiran Arora, School of Management, BML Munjal University, Gurgaon, Haryana, India
Kalluri Vinayak, School of Engineering & Technology, BML Munjal University, Gurgaon, Haryana, India
ID 679 Minimizing Mean Weighted Expected Tardiness by Integrating Preventive Maintenance and Production Scheduling Using Genetic Algorithm
Sumiharni Batubara, Iveline Anne Marie, and Cattelya F.H, Industrial Engineering Department, Faculty of Industrial Technology, Trisakti University, Jakarta Barat, INDONESIA
ID 680 A Quantitative Approach for Similarity Comparison of the Terminologies in Standard Documents
Huixing Meng, Department of Industrial Engineering, Tsinghua University, Beijing, China
Kanittha Setthapitayakul, Department of Industrial Engineering, Tsinghua University, Beijing, China
Yan-Fu Li, Department of Industrial Engineering, Tsinghua University, Beijing, China
ID 685 Personalized Product Recommendations on E-Commerce Websites with the use of Social Media
Pankaj Dutta, Shailesh J Mehta School of Management, Indian Institute of Technology Bombay, Mumbai, India
Hiren Rathod, Shailesh J Mehta School of Management, Indian Institute of Technology Bombay, Mumbai, India
Shanil Soni, Shailesh J Mehta School of Management, Indian Institute of Technology Bombay, Mumbai, India
Pratistha Chandra, Shailesh J Mehta School of Management, Indian Institute of Technology Bombay, Mumbai, India
ID 686 Data Mining in Healthcare Records: A Review Based on the Kind of Knowledge
Maria Sabastin S., Department of Management, Amrita Vishwa Vidyapeetham, Bengaluru, Karnataka, India
Akshay Anil Nair, Department of Management, Amrita Vishwa Vidyapeetham, Bengaluru, Karnataka, India
Rohit R., Department of Management, Amrita Vishwa Vidyapeetham, Bengaluru, Karnataka, India
ID 688 The Influence of Organizational Culture on Students’ Satisfaction in Saudi Arabia
Saad Aziz Al-Otaibi, Azman Hashim International Business School, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra (Jalan Semarak), Kuala Lumpur, Malaysia.
Sha’ri Mohd Yusof, Razak Faculty of Technology and Informatics, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra (Jalan Semarak), Kuala Lumpur, Malaysia
Wan KhairuzamanWan Ismail, SulaimanalRajhi School of Business, SulaimanalRajhi Colleges, Alqassim, Kingdom of Saudi Arabia
ID 721 The Effect of Classroom Questioning on Oral English Output of Junior High School Students
Lu Juan, School of Education, Universiti Teknologi Malaysia; School of Foreign Studies, Shaanxi University of Technology, China
Noraffandy Bin Yahaya, School of Education, Universiti Teknologi Malaysia, Malaysia
ID 722 A Multi-Objective Generalized Intuitionistic Fuzzy Linear Fractional Inventory Model with Possibility and Necessity Constraints
Totan Garai, Assistant Professor, Department of Mathematics, Silda Chandra Sekhar College, West Bengal, India
Tapan Kumar Roy, Professor, Department Mathematics, Indian Institute of Engineering Science and Technology, Shibpur, West Bengal, India
ID 723 SMOSA Optimization Approach to a Multi Objective Model for a Machine Tool Selection and Operation Allocation Problem in FMS
Roozbeh Azizmohammadi, Department Of Industrial Engineering, Payame Noor University, Tehran,Iran
Abbas Mahmoudabadi, Department of Industrial Engineering, MehrAstan University, Guilan, Iran
ID 724 Modeling Analysis in Furniture Company by Using System Dynamics
Kevin Oktavian, Departement of Industrial Engineering, Universitas Tarumanagara, Grogol
Petamburan, West Jakarta, Indonesia
Ahmad Ahmad, Departement of Industrial Engineering, Universitas Tarumanagara, Grogol
Petamburan, West Jakarta, Indonesia
Lilyana Jap, Departement of Industrial Engineering, Universitas Tarumanagara, Grogol
Petamburan, West Jakarta, Indonesia
Lina Gozali, Departement of Industrial Engineering, Universitas Tarumanagara, Grogol
Petamburan, West Jakarta, Indonesia
ID 748 Quality Improvement in Refrigerator Division for 1-Door Refrigerator with Implementation of Six Sigma and Data Mining Method
Rina Fitriana, Quality Control Laboratory, Industrial Engineering Department, Trisakti University
Johnson Saragih, Quality Control Laboratory, Industrial Engineering Department, Trisakti University
Azizah Khairina Sarasetyo, Quality Control Laboratory, Industrial Engineering Department, Trisakti University
ID 753 Occupational Health and Safety Issues among Workers in Stone Industries in North Karnataka
M. Manzoor Hussain, Department of Mechanical Engineering, Jawaharlal Nehru Technological
University, Hyderabad, INDIA
Katuru Phani Raja Kumar, Project Manager, Tech Mahindra Americas, USA.
Qutubuddin S.M., Industrial and Production Engineering Department, P.D.A.College of Engineering, Gulbarga, Karnataka State, INDIA
Hebbal S.S., Principal, P.D.A.College of Engineering, Gulbarga, Karnataka State, INDIA
ID 754 Optimization of Parameters for Sustainable Manufacturing Process – Special Focus on Machining Process
Abdullah Al-Ghielani , Sultan Qaboos University
Sujan Piya, Assistant Professor, Sultan Qaboos University
Ramanathan Arunachalam, Sultan Qaboos University
Bakhit Al-Mahri, Sultan Qaboos University
Abdullah Al-Ghielani, Sultan Qaboos University
Alwaleed Al-Jahwari, Sultan Qaboos University
ID 756 Stochastic Modeling of Rail Under-head Failure Risks
Sagheer Ranjha, Faculty of Science, Engineering and Technology, Swinburne University of Technology, Hawthorn, Australia
Ekambaram Palaneeswaran, Faculty of Science, Engineering and Technology, Swinburne University of Technology, Hawthorn, Australia
ID 757 Ergonomically Design E-Book to Improve Comprehension and Retention
Grace Lorraine D. Intal, School of Industrial Engineering and Engineering Management, Mapua University, Muralla St., Intramuros Manila
Janine Rose Talens School of Industrial Engineering and Engineering Management, Mapua University, Muralla St., Intramuros Manila
ID 758 Develop Tourism Demand Forecasting Model using Artificial Neural Network
Abdul Talib Bon, Faculty of Technology Management and Business Universiti Tun Hussein Onn Malaysia, Parit Raja, Batu Pahat 86400, Johor, Malaysia
Chan Seik Tieng, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Parit Raja, Batu Pahat 86400, Johor, Malaysia
ID 759 A Machine Learning based Intelligent Agent for Human Resource Planning in IC Design Service Industry
Chieh Hsu, Department of Industrial Engineering and Engineering Management, National Tsing
Hua University, Hsinchu, Taiwan, Artificial Intelligence for Intelligent Manufacturing Systems
(AIMS) Research Center, Ministry of Science & Technology, Taiwan
Hsuan-An Kuo, Department of Industrial Engineering and Engineering Management, National Tsing, Hua University, Hsinchu, Taiwan, Artificial Intelligence for Intelligent Manufacturing Systems, (AIMS) Research Center, Ministry of Science & Technology, Taiwan
Ju-Chien Chien, Department of Industrial Engineering and Engineering Management, National Tsing, Hua University, Hsinchu, Taiwan, Artificial Intelligence for Intelligent Manufacturing Systems, (AIMS) Research Center, Ministry of Science & Technology, Taiwan
Wenhan Fu, Department of Industrial Engineering and Engineering Management, National Tsing, Hua University, Hsinchu, Taiwan, Artificial Intelligence for Intelligent Manufacturing Systems, (AIMS) Research Center, Ministry of Science & Technology, Taiwan
Kang-Ting Ma, Department of Industrial Engineering and Engineering Management, National Tsing, Hua University, Hsinchu, Taiwan, Artificial Intelligence for Intelligent Manufacturing Systems, (AIMS) Research Center, Ministry of Science & Technology, Taiwan
Chen-Fu Chien, Department of Industrial Engineering and Engineering Management, National
Tsing, Hua University, Hsinchu, Taiwan, Artificial Intelligence for Intelligent Manufacturing Systems, (AIMS) Research Center, Ministry of Science & Technology, Taiwan
ID 760 Models and Metaheuristics for the Pollution Traveling Salesman Problem
Paolo Toth, DEI, University of Bologna, Viale Risorgimento 2, Bologna, Italy
Valentina Cacchiani, DEI, University of Bologna, Viale Risorgimento 2, Bologna, Italy
Carlos Contreras-Bolton, DEI, University of Bologna, Viale Risorgimento 2, Bologna, Italy
John W. Escobar, Pontificia Universidad Javeriana, Cali, Colombia
Luis M. Escobar-Falcon, Technological University of Pereira, Pereira, Colombia
Rodrigo Linfati, University of Bio Bio, Av. Collao, Concepcion, Chile
ID 761 Entrepreneurial Competencies and Business Performance of Pontian Small Medium Enterprises
Avlyin Jay Sumayong, Department of Technology Management, Faculty of Technology
Management and Business, University Tun Hussein Onn Malaysia
Ng Kim Soon, Department of Technology Management, Faculty of Technology
Management and Business, University Tun Hussein Onn Malaysia
Muhammad Raushan Bin Azhar, Department of Technology Management, Faculty of Technology Management and Business, University Tun Hussein Onn Malaysia
Agnes Sumayung, Department of Technology Management, Faculty of Technology
Management and Business, University Tun Hussein Onn Malaysia
ID 762 Understanding the Antecedents of Social Media Fatigue
Shih-Chih Chen, Department of Information Management, National Kaohsiung University of Science and Technology, Kaohsiung, Taiwan, Republic of China
ID 763 Current Health Disease among Solid Waste Management Workers: A Case Study in Malaysia
Ivy Deirdre Mangkau, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Malaysia
Dr. Seow Ta Wee, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Malaysia
Federick Noel Mangkau, Faculty of Science and Natural Resources, Universiti Malaysia Sabah, Sabah, Malaysia
ID 764 Design and Development of a Decision Support System with Visual Analytics to Improve MRT Maintenance Operations
Grace Lorraine D. Intal, School of Information Technology, Mapua University, Muralla St., Intramuros Manila
Thea Marielle C. Gomez, School of Information Technology, Mapua University, Muralla St., Intramuros Manila
Alison Vince T. Cadorniga, School of Information Technology, Mapua University, Muralla St., Intramuros Manila
Jeongwong Kang, School of Information Technology, Mapua University, Muralla St., Intramuros Manila
ID 765 Pilot Study: Organizational Creativity in Indonesia’s Creative Industries
Retno Indriartiningtias, Doctoral Student Doctoral in Mechanical and Industrial Engineering Department, Gadjah Mada University, Yogyakarta, Indonesia, Industrial Engineering
Department, Trunojoyo University, Bangkalan, East Java, Indonesia
Budi Hartono, Subagyo, Mechanical and Industrial Engineering Department, Gadjah Mada University, Yogyakarta, Indonesia
ID 766 Reasoning Types in Industrial Engineering/Operations Management Processes
Muhittin Oral, Graduate School of Business, Ozyegin University, Istanbul, Turkey
Ossama Kettani, Modellium Inc., Centre Ville, Québec City, Canada
ID 767 Information Security for Hospital Information System Using COBIT 5 Framework
Khilda Nistrina, Faculty of Technology Management and Business, University Tun Hussein Onn Malaysia, Johor
Prof. Dr. H. Abdul Talib Bin Bon, Faculty of Technology Management and Business, University Tun Hussein Onn Malaysia, Johor
ID 769 A Conceptual Framework on the Role of Road Safety Management Intervention in Overcoming Road Accident
Siti Hawa Harith, Faculty of Social Science and Humanities, Universiti Teknologi Malaysia, Johor, Malaysia, School of Business Management, Universiti Utara Malaysia, Kedah, Malaysia
Norashikin Mahmud, Faculty of Social Science and Humanities, Universiti Teknologi Malaysia, Johor, Malaysia
Mehran Doulatabadi, Graduate School of Business Administration, Meiji University, Tokyo, Japan
ID 770 Review of the Implementation Status & Associated Challenges for Industry 4.0 Transformation in Asian MSMEs
Sanjiv Narula, Research Scholar, BML Munjal University
Vishal Talwar, BML Munjal university
Maheshwar Talwar, BML Munjal university
Surya Prakash, BML Munjal university
Saravjit singh, BML Munjal university
ID 771 Measuring Utrecht Work Engagement Scale: Factor Analysis Approach in Telecommunication Sector
Abdul Talib Bon, Faculty of Technology Management, Business and Entrepreneurship,
University Tun Hussein Onn Malaysia, Parit Raja, Malaysia
Abdirahman Mohamud Shire, Faculty of Technology Management, Business and Entrepreneurship, University Tun Hussein Onn Malaysia, Parit Raja, Malaysia
ID 772 Increasing Productivity and Efficiency for Third Party Logistics Service
Josephine D. German, School of Industrial Engineering and Engineering Management, Mapúa University, Intramuros, Manila, Philippines
Maria Katrina T. Asuncion, School of Industrial Engineering and Engineering Management, Mapúa University, Intramuros, Manila, Philippines
Louie E. Pacheco, School of Industrial Engineering and Engineering Management, Mapúa University, Intramuros, Manila, Philippines
ID 774: Problem Based Learning for Techno-economic Analysis for Logistics System Course: Case in a State-owned Warehouse
Muhammad Hisjam, Department of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
ID 775 Preparation of Polyacrylamide Grafted onto Magnetic Cellulose as Flocculant in Wastewater Pre-treatment Application
Mohd Hizam, School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Johor, Malaysia
Norzita Ngadi, School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Johor, Malaysia
ID 776 Environmental Factor and Road Accident: A Review Paper
Siti Hawa Harith, Faculty of Social Science and Humanities, Universiti Teknologi Malaysia, Johor, Malaysia, School of Business Management, Universiti Utara Malaysia, Kedah, Malaysia
Norashikin Mahmud, Faculty of Social Science and Humanities, Universiti Teknologi Malaysia
Johor, Malaysia
Mehran Doulatabadi, Graduate School of Business Administration, Meiji University, Tokyo, Japan
ID 777 Learning 4.0: Connecting the Dots, Reaching the Unbleached by ICT Adoption in Education
Meenakshi Narula, Educator and Co-coordinator , Blue Bellls model school
Sanjiv Narula, Research Scholar, BML Munjal University
Sudhanshu Padhey, Hero
Soumen Bhattacharya
ID 778 Surfactant and Polymer-Nanoparticle Interaction with Heavy Crude Oil
Rahul Saha, Department of Chemical Engineering, Indian Institute of Technology Guwahati,
India
Ramgopal Uppaluri, Department of Chemical Engineering, Indian Institute of Technology, Guwahati,India
Pankaj Tiwari, Department of Chemical Engineering, Indian Institute of Technology Guwahati,
India
ID 779 The Capacitated Multiple-Allocation Hub Location Problem Model for Railway Logistics Transportation
Virda Hersy Lutviana Saputri, Master Program of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
Wahyudi Sutopo, Department of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
Yuniaristanto, Department of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
Muhammad Hisjam, Department of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
ID 780 The Project Based Learning Combined with Problem Solving Based Learning in Industrial Engineering Programs
Eldon Caldwell, Dean of Industrial Engineering Department, University of Costa Rica
ID 781 Effect of Emotional Intelligence on Employee Work-Engagement and Career Satisfaction Using Thriving As a Mediator and Power Distance as a Moderator
Abroo Murtaza, Foundation University Rawalpindi Campus, Pakistan
ID 782 Enhancing Firm Performance through Human Resource Management (HRM) Practices and HR Roles
Ivana voo, UTM
Khairiah Soehod, Universiti Teknologi Malaysia
Choi Sang Long, Raffles University Iskandar
Mehran Doulatabadi, Visiting Senior Research Fellow, Meiji University
ID 783 Impact of Exploitative Leadership on Employee Outcomes and Moderating Role of Narcissism
Irfan Sakhawat, Riphah International University Islamabad
Asma Gul, Riphah International University Islamabad
Abroo Murtaza, Riphah International University Islamabad
ID 784 Development of Framework for the Core Soft Skills and Competencies Required by Project Managers in Oil and Gas Industry
Esra Abusharkh, Sultan Qaboos University
Asila Al-Shamli, Sultan Qaboos University
Nasr Al Hinai, Sultan Qaboos University
Emad Summad, Assistant Professor, Sultan Qaboos University
ID 785 Individual Characteristics Influencing Employee Innovative Behavior with Reward as Moderator in Universiti Teknologi Malaysia
Ivana voo, UTM
Khairiah Soehod, Universiti Teknologi Malaysia
Hapriza Ashari, Universiti Teknologi Malaysia
Ebi Shahrin Suleiman, Universiti Teknologi Malaysia
Norzaidahwati Zaidin, Universiti Teknologi Malaysia
Roshaslizawati Mohd Noor, Universiti Teknologi Malaysia
Mehran Doulatabadi, Visiting Senior Research Fellow, Meiji University
ID 786 Design of an Automated Millet Milling Machine
Kudzaishe L Mudzingwa, University of Zimbabwe, Department of Mechanical Engineering, Mount Pleasant Harare, Zimbabwe
Tawanda Mushiri, University of Zimbabwe, Department of Mechanical Engineering, Mount Pleasant Harare, Zimbabwe
ID 787 Expanding Central Craft Company
Dalal Al-Beshaier, Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
Nour Al Enezi, , Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
Noor Khourshed, , Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
Rawan Al-Elaj, , Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
Sherifa Al-Kandari, , Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
Mustafa Sendil, , Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
ID 788 Thermodynamic Modeling of Vapor Absorption Refrigeration Cycle-An Overview
Uhamir Patrick, Engineer, The Benazir Bhutto Shaheed University Of Technology And Skill Development, Khairpur Mirs, Sindh, Pakistan
Hussain Bux Marri, Dean Of Faculty, Bsc Engineering Technology, The Benazir Bhutto Shaheed University Of Technology And Skill Development, Khairpur Mirs, Sindh, Pakistan
ID 789 Study of Wood Dust and Chemical Hazard at Wood Based Furniture
Anis Amira Mat Zuki, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Jafri Mohd Rohani, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Khidzir Zakaria, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Hafsam Maghpor, National Institute of Occupational Saafety and Health, Senai, Johor Bahru
Ismail Abdul Rahman, National Institute of Occupational Saafety and Health, Senai, Johor Bahru
Norul Azreen Azis, National Institute of Occupational Saafety and Health, Senai, Johor Bahru
ID 790 Study of Ergonomics and Noise Hazard at Wood Based Furniture Industry
Anis Amira Mat Zuki, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Jafri Mohd Rohani, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Khidzir Zakaria, School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Hafsam Maghpor, National Institute of Occupational Saafety and Health, 81400, Senai, Johor Bahru
Ismail Abdul Rahman, National Institute of Occupational Saafety and Health, 81400, Senai, Johor Bahru
Norul Azreen Azis, National Institute of Occupational Saafety and Health, 81400, Senai, Johor Bahru
ID 791 Categorization of Shopping Centres in Malaysia: A Criteria-Based Delphi Study
Ihfasuziella Ibrahim, Construction Research Institute of Malaysia (CREAM)
Talib Bon
Abdul Hadi Nawawi, Faculty of Architecture, Planning and Surveying, UiTM
Edie Ezwan Mohd Safian, Faculty Technology and Business, UTHM
ID 792 The Role of Railway Industry in Indonesia’s Economic Growth
Hermanto Dwiatmoko, Faculty of Engineering, University of Mercu Buana, Jakarta, Indonesia
ID 795 Development of an Automated Railway Level Crossing Gate Control System using PLC
Rumana Tasnim, World University of Bangladesh, Bangladesh
Abu Salman Shaikat, World University of Bangladesh, Bangladesh
Kamruzzaman Sarkar, World University of Bangladesh, Bangladesh
Ismail Mahmud, World University of Bangladesh, Bangladesh
Mohammad Ali, World University of Bangladesh, Bangladesh
Tarikul Islam, World University of Bangladesh, Bangladesh
ID 800 Estimating people stature based on Hand Length and Width: a case of Omani people
Awadh Al Shehemi, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Oman
Mohammad Khadem, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Oman
Sujan Piya, Assistant Professor, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Oman
ID 801 Application of Multi-Criteria Decision Making (MCDM) Tools in Governance Evaluation of Accessible and Inclusive Urban Developments (AIUD)
Amal AlKhamis, PhD in Engineering Management Program, University of Sharjah, Sharjah, UAE
Fikri Dweiri, Department of Industrial Engineering and Engineering Management, University of Sharjah, Sharjah, UAE
Hasim Altan, Department of Architectural Engineering, University of Sharjah, Sharjah, UAE
ID 802 Contemporary Modular Study Table for Small Minimalist Residence in Malaysia
Mohamad Ali Selimin, Universiti Tun Hussein Onn Malaysia, Malaysia
Safari Hasanuddin, Universiti Tun Hussein Onn Malaysia, Malaysia
Juliana Abdul Halip, University Tun Hussein Onn Malaysia (Uthm), Malaysia
Abdullah Al Rashid Ab Hamid, University Tun Hussein Onn Malaysia (Uthm), Malaysia
Abdul Talib Bon, Null, Universiti Tun Hussein Onn Malaysia, Malaysia
ID 803 Calculation of Safety Stock and Bottleneck Minimization with Theory of Constraints Method Approach on Sand Coated Metal Roof Production in XYZ Ltd.
Jason Nathanael Chandra, Department of Industrial Engineering, Tarumanagara University, Jakarta, Indonesia
Lina Gozali, Department of Industrial Engineering, Tarumanagara University, Jakarta, Indonesia
Lilyana Jap, Department of Industrial Engineering, Tarumanagara University, Jakarta, Indonesia
ID 807 Handling Heavy Metal Waste through Utilization of Lapindo Activated Mud HCl to Realize Environmentally Friendly Industries
Sigit Trimayanto, Department of Chemistry, State University of Surabaya, Surabaya, Indonesia
Sari Edi Cahyaningrum, Department of Chemistry, State University of Surabaya, Surabaya, Indonesia
ID 812 Supply China Finance with Applications of Block Chain
Kin Keung Lai, International Business School, Shaanxi Normal University, Xian, China
ID 813 Factors Affecting Efficiency of Police Stations in Metropolitan Police Division 3
Pornpimol Chaiwuttisak, Statistics Department, King Mongkut’s Institute of Technology Ladkrabang, Bangkok, Thailand
ID 814 Achieving Performance Excellence through “TRADE” Best Practice Benchmarking Methodology: The Dubai Government Experience
Mehran Doulatabadi , Visiting Senior Research Fellow , Meiji University
ID 815 Developing Students Graduate Attributes in Service Learning Project through Online Platform
Azizah Yusof, Faculty of Social Sciences and Humanities, Universiti Teknologi Malaysia, Johor Bahru, Johor, Malaysia
Noor Azean Atan, Faculty of Social Sciences and Humanities, Universiti Teknologi Malaysia, Johor Bahru, Johor, Malaysia
Jamalludin Harun, Faculty of Social Sciences and Humanities, Universiti Teknologi Malaysia, Johor Bahru, Johor, Malaysia
Mehran Doulatabadi, Graduate School of Business Administration, Meiji University, Tokyo,
Japan
ID 818 Life Cycle Assessment in Ceramic Floor Tile Industry in Sri Lanka
S. Kamalakkannan, Department of Manufacturing & Industrial Engineering, Faculty of Engineering, University of Peradeniya
R.L. Peiris, Department of Manufacturing & Industrial Engineering, Faculty of Engineering, University of Peradeniya
A.K. Kulatunga, Department of Manufacturing & Industrial Engineering, Faculty of Engineering, University of Peradeniya
ID 819 Understanding Outsourcing from Client’s Perspective: Revisiting the Existing Literature
Damitha Rajini, Faculty of Graduate Studies, University of Colombo, Sri Lanka
K.A.S.P. Kaluarachchi, Department of Management and Organisation Studies, University of Colombo, Sri Lanka
ID 820: Learning a Supply Chain Management Course by Problem Based Learning: Case Studies in the Newspaper Industry
Wahyudi Sutopo, Research Group of Industrial Engineering and Techno-economics, Department of Industrial Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
Era Febriana Aqidawati, Laboratory of Logistics and Business System, Department of Industrial Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
ID 821 Predicting Online Search Intention for Validating Product Halalness Status
Ida Giyanti, Industrial Engineering Study Program, Universitas Setia Budi, Surakarta, Indonesia
Erni Suparti, Industrial Engineering Study Program, Universitas Setia Budi, Surakarta, Indonesia
Wahyudi Sutopo, Research Group of Industrial Engineering and Techno-economics, Department of Industrial Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
ID 822 Framework System of University Technology Based Start-Up Development by University Incubator: Case Study
Wahyudi Sutopo, Research Group of Industrial Engineering and Techno Economy, Industrial Engineering Department, Sebelas Maret University, Indonesia, Surakarta, Indonesia
Yuniaristanto, Laboratory of Logistic and Business System, Industrial Engineering Department, Sebelas Maret University, Indonesia, Surakarta, Indonesia
Danis Eka Prasetya Wicaksana, Laboratory of Logistic and Business System, Agency for Assessment and Application Technology, BPPT, Technology Policy Assessment, Indonesia
Anugerah Widiyanto, Research Group of Industrial Engineering and Techno Economy, Agency for Assessment and Application Technology, BPPT, Technology Policy Assessment, Indonesia
ID 823 Technical Feasibility Battery Lithium to Support Unmanned Aerial Vehicle (UAV): A Technical Review
Nida An Khofiyah, Department of Industrial Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
Wahyudi Sutopo, Research Group of Industrial Engineering and Techno-economics, Universitas Sebelas Maret, Surakarta, Indonesia
Bayu Dwi Apri Nugroho, Department of Agricultural and Biosystems Engineering, Faculty of Agricultural Engineering, Universitas Gadjah Mada, Yogyakarta, Indonesia
ID 824 Influence of Work Safety and Work Stress on Productivity
Daswir Lelo, PhD Candidate, Universiti Teknologi Malaysia
Sha’ri Mohd. Yusof, Razak School Engineering and Advanced Technology, Universiti Teknologi Malaysia
Jan Horas V. Purba, Sekolah Tinggi Ilmu Ekonomi Kesatuan, Bogor, Indonesia
ID 825 Internal vs External Green Supply Chain Management at Petrochemical Industry Economic Performance in Indonesia
Yuary Farradia, Faculty of Technology and Management, Universiti Tun Hussein Onn, Batupahat, Johor , Malaysia
Abdul Talib Bin Bon, Faculty of Technology and Management, Universiti Tun Hussein Onn, Batupahat, Johor , Malaysia
Hari Muharam, Faculty of Economics, Pakuan University, Bogor, Indonesia
ID 826 Environment Sustainability in Petrochemical Industry in Indonesia
Yuary Farradia, Faculty of Technology and Management, Universiti Tun Hussein Onn, Batupahat, Johor , Malaysia
Abdul Talib Bin Bon, Faculty of Technology and Management, Universiti Tun Hussein Onn, Batupahat, Johor , Malaysia.
ID 827 Green Marketing Mix Role Toward Sustainability Performance of Petrochemical Industry in Indonesia
Yuary Farradia, Faculty of Technology and Management, Universiti Tun Hussein Onn, Batupahat, Johor , Malaysia
Abdul Talib Bin Bon, Faculty of Technology and Management, Universiti Tun Hussein Onn, Batupahat, Johor , Malaysia
ID 828 User-Entity Behavior Analytics (UEBA) – A Systematic Review of Literatures
Revanth Filbert Raj I, Department of Management, Amrita Vishwa Vidyapeetham University
Bangalore, India
Shekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University
Bangalore, India
ID 829 CSR and Social Media Analytics in India
Arya Sree, Department of Management, Amrita Vishwa Vidyapeetham University, Bangalore, India
Shekar Babu PhD Department of Management, Amrita Vishwa Vidyapeetham University, Bangalore, India
ID 830 Vulnerability Management (VM) Analytics – A Systematic Review of Literatures
Rahul C. N, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
Shekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University
Bangalore, India
ID 831 Healthcare Social Factors of Companies in India
Amritha M Nair, Department of Management, Amrita Vishwa Vidyapeetham University
Bangalore, India
Shekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
ID 832 Social Disclosures using Social Media in India
Abiram Guruswamy, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
Shekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
ID 833 An Analysis of Indian Companies on Whistle Blowing
M. Raghuraman, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
Shekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
ID 834 Willful Default or Socially Responsible – A Study of Indian Banks and Companies
M. Sathish Kumar, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
Prabhavathi.K., School of Humanities and Management, National Institute of Technology, Tadepalligudam, West Godavari, Andhra Pradesh, India
Shekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
ID 835 Comparison of Mandated CSR Performance Models across Various Industries in India
Kavya Suresh, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
Shekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
ID 836 Develop a Decision Support System (DSS) for Social Activities by Companies in India
Shushant Pal, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
Shekar Babu PhD, Department of Management, Amrita Vishwa Vidyapeetham University Bangalore, India
ID 837 Research on Application of Computer Aided Translation Technology to Translation Teaching
Lu Juan, School of Education, Universiti Teknologi Malaysia; School of Foreign Studies, Shaanxi University of Technology, China
Noraffandy Bin Yahaya, School of Education, Universiti Teknologi Malaysia, Malaysia
ID 838 A Study on Awareness of Block Chain Technology among Human Resources Executives in India
Vinith Kumar Nair, Marketing & Associate Dean, TKM Institute of Management, Kerala, India
Maria Sabastin S., Department of Management, Amrita Vishwa Vidyapeetham, Bengaluru, Karnataka, India
ID 839 Knowledge, Attitude and Practices of OSHCIM Implementation Readiness from the Perspective of Clients, Designers and Contractors
Jafri Mohd Rohani, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Kamarizan Kidam, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Mohammad Ismail, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Hamidah Kamarden, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Siti Suhaili Suhaili Shalan, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Anis Amira Mat Zuki, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Augeny Satik anak Ayak, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Raja Nor Atikah Raja Azam Shah, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Kherun Nita Ali, Faculty of Built Environment, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Hamizah Liyana Tajul Ariffin, Faculty of Built Environment, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Norhazren Izatie Mohd, Faculty of Built Environment, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Nur Emma Mustaffa, Faculty of Built Environment, Universiti Teknologi Malaysia, Skudai, Johor Bahru
Samsiah Abdullah, Faculty of Built Environment, Universiti Teknologi Malaysia, Skudai, Johor Bahru
ID 841 Analysis of Course Content Development using Pedagogic Framework – A Case Study
Manoj Kumar Soni and Tamali Bhattacharyya, Birla Institute of Technology and Science, Pilani, Rajasthan, India
Bani Bhattacharya, Indian Institute of Technology, Kharagpur, Khargpur, India
ID 842 Sorghum-Based Alternative Food Industry: Entrepreneurship High Education
Endang Noerhartati, Department of Agroindustrial Technology, Universitas Wijaya Kusuma Surabaya, Indonesia, Jl. Dukuh Kupang XXV/54 Surabaya, Indonesia, Postgraduate Student, Department of Education Management, Unesa, Surabaya, Indonesia, Jl. Kampus Ketintang, Surabaya, Indonesia
Lusy Tunik Muharlisiani, Department of English Education, Universitas Wijaya Kusuma, Surabaya, Indonesia, Postgraduate Student, Department of Education Management, Unesa, Surabaya, Indonesia
Dewie Tri Wijayati, Yatim Riyanto, Toho Cholik Mutohir, Professor, Department of Education Management, Uneversitas Negeri Surabaya, Indonesia
Soedjarwo, Warih Handayaningrum, Moedjito, Lecture, Department of Education Management, Uneversitas Negeri Surabaya, Indonesia
Abdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan Universiti Tun Hussein Onn Malaysia (UTHM) Johor, Malaysia
ID 843 Design and Development of Game Based Evaluation and Learning (GABEL) for Applied Thermodynamics course for Active Learning
Manoj Kumar Soni and Tamali Bhattacharya, Birla Institute of Technology and Science (BITS), Pilani, India
ID 845 Women’s Leadership Policy Strategy: Improving Quality of Education (TQM) In Higher Education
Lusy Tunik Muharlisiani, Department of English Education, Universitas Wijaya Kusuma, Surabaya, Indonesia, Postgraduate Student, Department of Education Management, Unesa, Surabaya, Indonesia
Endang Noerhartati, Department of Agroindustrial Technology, Universitas Wijaya Kusuma Surabaya, Indonesia, Postgraduate Student, Department of Education Management, Unesa, Surabaya, Indonesia
Dewie Tri Wijayati, Yatim Riyanto, Toho Cholik Mutohir, Professor, Department of Education Management, Universitas Negeri Surabaya, Indonesia
Soedjarwo, Warih Handayaningrum, Moedjito, Lecture, Department of Education Management, Uneversitas Negeri Surabaya, Indonesia
Siti Bariroh – Universitas Gresik, Indonesia
Abdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan Universiti Tun Hussein Onn Malaysia (UTHM) Johor, Malaysia
ID 846 DMAIC Approach to Improve on Safety Performance Using Safety Management System in Kuwait International Airport
Suat Kasap, Alaa Al-Shammari, Nadine Awadah, Zahra’a Kamal, and Sahar Redha, Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
ID 855 Control Returnability Inventory Using System Dynamic Modeling and Fuzzy Logic
Muhammad Talha*1, Syed Ahmad Helmi*1,2, Azanizawati Ma’aram*1 and Muhammad Hisjam*3
1Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 Johor, Malaysia
2Center for Engineering Education, Universiti Teknologi Malaysia, 81200 Skudai, Johor Bahru
3Department of Industrial Engineering, Faculty of Engineering, Sebelas Maret University, Surakarta, Indonesia
© IEOM Society International