ISBN: 978-0-9808251-0-7
George Q. Huang, T. Qu, YingFeng Zhang, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong, Hong Kong, China
HD Yang, Faculty of Automation, South China University of Technology, Guangzhou, China
ID 2 Bottleneck Management Strategies in Semiconductor Wafer Fabrication Facilities
Shirley J. Tanjong, Department of Mechanical and Manufacturing Engineering, Universiti Malaysia Sarawak, Kota Samarahan, Sarawak 94300, MALAYSIA
Radwan, A., and Majid Aarabi, Department of Manufacturing and Industrial Engineering, Faculty of Mechanical, Engineering, Universiti Teknologi Malaysia, 81310 Skudai, Johor, MALAYSIA
ID 4 A Lot-sizing Algorithm for Pull Production Environments
Olufemi Adetunji, VSS Yadavalli, Department of Industrial Engineering and Systems Engineering, University of Pretoria, Hatfield, Pretoria 0002, South Africa
Tiena Gustina Amran, Department of Industrial Engineering, Trisakti University, Jakarta 11440 , Indonesia
Dinar Suryo lesmono, Department of Industrial Engineering, Trisakti University, Jakarta 11440 , Indonesia
ID 6 Study of Process Parameters in Friction Stir Welding of Dissimilar Aluminium Alloys
D.Muruganandam, K.S.Sreenivasan, S.Ravi Kumar, Research Scholars, Sathyabama University, Chennai-119, Tamil Nadu, India.
Sushilal Das, Principal, Jeppiar Engineering College, Chennai-119, Tamil Nadu, India.
V.Seshagiri Rao, Head of Dept, Mechanical, St.Joseph College of Engineering, Chennai-119, Tamil Nadu, India
Taravatsadat Nehzati, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, University Putra Malaysia, 43400 UPM, Serdang, Malaysia.
Napsiah Ismail, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, University Putra Malaysia, 43400 UPM, Serdang, Malaysia.
Prof. Dr.Kahtan k.Al-Khazraji*, Asst.Prof.Dr.Waleed A. Al-Nasir*, Payman Sahbah Ahmed*, *Department of material engineering, University of technology , Baghdad, Iraq
ID 9 An Investigation in to the AMT Implemented Systems in Manufacturing Enterprises of Pakistan
Ghulam.Yasin Shaikh, Zeeshan Khatri, Hussain Bux Marri, Dr R.A Sohag and M Aslam Uqaili, Department of Industrial Engineering and Management, Mehran University of Engineering and Technology, Jamshoro – 76062- Sindh, Pakistan
Ana Sakura Zainal Abidin, Department of Mechanical and Manufacturing Engineering, Universiti Malaysia Sarawak, 94300 Kota Samarahan, Sarawak, Malaysia
Rosnah Mohd Yusuff, Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor, Malaysia
Rasli Muslimen, Department of Mechanical and Manufacturing Engineering, Universiti Malaysia Sarawak, 94300 Kota Samarahan, Sarawak, Malaysia
ID 11 To stay competitive in future automotive assembly – Some challenges related to flexibility
Björn Diffner, Mats Björkman, Kerstin Johansen, Department of Management & Engineering, Linköping University, Linköping, 581 83 Linköping, Sweden
WAY Wan Yusoff, Erry Yulian T.Edesta, Aishah Najiah, Nor Farah Huda, Department of Manufacturing and Materials Engineering, International Islamic University Malaysia, P O Box 50728 Kuala Lumpur, Malaysia
Ramamoorthy.C., Dr. V. Selladurai, Dr. Rajesh Ranganathan, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore – 641 014, Tamilnadu, India
Dineshkumar.A., Aerospace Divisions, MAE, Nanyang Technological University, Singapore
ID 14 Targeting Results: Lessons Learned from UAE National ID Program
Ali M. Al-Khouri, Emirates Identity Authority, Abu Dhabi, UAE
ID 15 Malaysia Deep Water Manufacturing facilities (GUMUSUT)
- AMIRUL KHAIR B. SALEHUN, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja – Batu Pahat
Professor Dr. Awaluddin b Mohamad Shaharoun, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja – Batu Pahat
Professor Dr. Awaluddin b. Mohamed Shaharoun (Haj.), Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia
JrJung Lyu, Chi-Yun Cheng, Department of Industrial and Information Management, National Cheng Kung University, Tainan, Taiwan, ROC
ID 17 A Study to Assess Operational Factors to Enhance Project Performance
Ateekh-Ur-Rehman, Yusuf Siraj Usmani, A.M.A Al-Ahmari, Department of Industrial Engineering, King Saud University, Riyadh-11421, Kingdom of Saudi Arabia, KSA
Marjan Mohammadjafari, Shamsuddin Ahmed and Siti Zawiah Md Dawal, Department of Engineering, Design and Manufacturing University of Malaya, Lembah Pantai, 50603 Kuala Lumpur, Malaysia
Hadi Zayandehroodi, Department of Electrical and Electronic Engineering, Islamic Azad University of Kerman, Kerman, 7635131167, Iran
Damiebi Denni-Fiberesima, Sarawak Shell Berhad (UIA/T/E/CMC), Locked Bag 1, 98009 Miri Sarawak Malaysia
Nazatul Shima Abdul Rani, School of Business, Curtin University of Technology, Sarawak Campus, 98009 Miri, Sarawak, Malaysia.
ID 20 A Proposal Framework for Evaluating Risks of Information Technology Outsourcing
Keramati, Department of Industrial Engineering, College of Engineering, University of Tehran, P.O. Box 11365–4563, Tehran, Iran; Email:
Samadi, Department of Industrial Engineering, Islamic Azad, University, South Tehran Branch, Tehran, Iran.
Nazari-Shirkouhi, Department of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran.
ID 21 Advanced Manufacturing Technology Implementation Performance: Towards A Strategic Framework
Sara Saberia, Rosnah Mohd. Yusuff, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, University Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia
ID 22 Risk Assesment: Fault Tree Analysis
Afzal Ahmed+, Saghir Mehdi Rizvi*, Zeshan Anwer Rana*, Faheem Abbas*
+COMSAT Institute of Information and Technology, Sahiwal, Pakistan, *Navy Engineering College, National University of Sciences and Technology, Islamabad
Cláudia do R. V. Morgado, Environmental Engineering Program, Polytechnic School, Federal University of Rio de Janeiro, Brazil
Victor P. P. Esteves, Environmental Engineering Program, Polytechnic School, Federal University of Rio de Janeiro, Brazil
ID 24 Operations-Based Knowledge Management
Rafed Zawawi, Hasan Akpolat and Ravindra Bagia, School of Systems, Management & Leadership, Faculty of Engineering and Information Technology, University of Technology, Sydney, NSW 2007, Australia
ID 25 Capital Structure Decisions in the Biopharmaceutical Industry
Fabio Zambuto, Carolina Billitteri and Giovanna Lo Nigro, Dipartimento di Tecnologia Meccanica, Produzione e Ingegneria Gestionale, 90128 Palermo, University of Palermo, Italy
ID 26 Airline Emission Forecast Through Empirical Analysis of Its Contributing Factors
Nirmalraj, Department of Computer Science and Engineering, Sriram Engineering College, Chennai, India
Dr. P. Malliga, Department of Industrial Engineering, Anna University, Chennai, India
Mr. K. Krishnamurthy, Kingfisher Airlines, Mumbai, India
ID 27 A Framework to Support the Decision of Vertical Integration Strategy
Güneş Küçükyazıcı, Seçkin Polat, Sezi Çevik Onar, Department of Industrial Engineering, Istanbul Technical University, Macka, Istanbul 34367, TURKEY
ID 28 A Systems Approach for the Effective Adoption of Rapid Prototyping for SMEs
Ayyaz Ahmad, Muhammad Ilyas Mazhar and Ian Howard, Department of Mechanical Engineering, Curtin University of Technology, WA 6102, Australia
ID 29 A new balancing approach in Balanced Scorecard by applying cooperative game theory
- Jafari-Eskandari, Department of Industrial Engineering, Iran University of Science and Technology, Narmak, Tehran 16846-13114, Iran
A.R. Aliahmadi, M.Heidari and GH.H.Khaleghi, Department of Industrial Engineering, Iran University of Science and Technology, Narmak, Tehran 16846-13114, Iran
Md. Anisul Islam, Department of Industrial and Production Engineering, Shah Jalal University of Science and Technology, Sylhet-3114, Bangladesh.
Mohammad MR Khan Khadem, Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, Muscat 123, Sultanate of Oman
Md. Alauddin, Department of Industrial and Production Engineering, Shah Jalal University of Science and Technology, Sylhet-3114, Bangladesh
K. Chang,*, S. J. Li, K. S. Wu, Department of Safety Health and Environment Engineering, National Yunlin University of Science and Technology (NYUST), Yunlin 64002, Taiwan, R.O.C.
Yunos bin Ngadiman, Faculty of Technology Management, Business and Entrepreneurship, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor, Malaysia.
Dr. Burairah bin Hussin, Faculty of Information and Communication Technology, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
Dr. Izaidin bin Abdul Majid, Faculty of Technology Management and Entrepreneurship, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
ID 33 Proposal for economic disposal of sawdust as an alternative energy source: A Case Study
Ehelepola I. , Bandara M.R.M.S., Perera G.I.P.
ID 34 Present Scenario of Compressed Natural Gas (CNG) as a Vehicular fuel in Bangladesh
Salma A. Iqbal1, M. Iqbal2 and A.F.M. Salauddin3
- Department of Chemical Engineering & Polymer Science
- Department of Industrial Production Engineering
- Registrar Office
Shahjalal University of Science & Technology, Sylhet, Bangladesh.
ID 35 Multi-criteria structured equation mode on managerial capabilities
Shahryar Sorooshian, Norzima zulkifli, Department of mechanical and manufacturing engineering, University Putra Malaysia, Selangor State, 43400, Malaysia
ID 36 A Hybrid Approach for CPLP with Multicommodity Flow
S.A. MirHassani, Faculty of Mathematics and Computer Science,, Amirkabir University of Technology, Tehran, Iran
- Hooshmand Khaligh, Faculty of Mathematics and Computer Science, Amirkabir University of Technology, Tehran, Iran
William M. Goriwondo*, Samson Mhlanga, Alphonce Marecha National University of Science and Technology, Department of Industrial and Manufacturing EngineeringP.O. Box AC 939, Ascot, Bulawayo, Zimbabwe
ID 38 Real-time Tracking and Tracing System: Potentials for the Logistics Network
AHM Shamsuzzoha and Petri T Helo, Department of Production, University of Vaasa, Vaasa, FI-65101, FINLAND
ID 39 Dynamically Stable Vertical Integration of Firms in a Supply Chain
David W.K. Yeung, SRS Consortium for Advanced Study in Cooperative Dynamic Games, Shue Yan University, Braemar Hill, Hong Kong and Center of Game Theory, St Petersburg State University, St Petersburg 198904, Russia
Sanei, O., Nasiri, V., Marjani, M.R., Moattar Husseini, S.M., Department of industrial and engineering, Amirkabir university of technology, Tehran, Iran
ID 41 Concept of Bills of Material for Supply Chain Planning and Its Prototyping with ERP
Ryo SATO, Yoshiki MATSUI, Maki FURUKADO, Faculty of Business Administration, Yokohama National University, Tokiwadai, Hodogaya-ku, 240-8501, JAPAN
ID 42 Management Aspects of Industrial Technology Transfer to Developing Countries
Mujbil Al-Marsumi, Applied Science University, Industrial Engineering Department, Amman, Jordan
Mehdi Bijari, Parvin Mostofian, Department of Industrial Engineering, Isfahan University of Technology, 84156-83111, Isfahan, Iran
ID 45 Production Planning under Uncertainty with Multiple Customer Classes
Tarik Aouam, Department of Industrial Engineering, AlHosn University, Abu Dhabi, United Arab Emirates, P.O. Box 38772
Sawat Pararach, Department of Industrial Engineering, Faculty of Engineering, Thammasat University, Pathumthani 12121. THAILAND
ID 47 Dynamics of Successive Product Generation-A System Dynamics Perspective
Dennis T. Beng Hui and Emil Adrian V. Fernandez, Center for Operations Research and Management Science, Department of Industrial Engineering, De La Salle University, Taft Avenue Manila, 1004, Philippines
ID 48 A new cell formation model using sequence data and handling cost factors
Ehsan. Teymourian, Iraj. Mahdavi, Vahid. Kayvanfar, Department of Industrial Engineering
ID 49 Optimization of Depth of Cut in Multi-pass Machining Using Hopfield Type Neural Networks
Sezgi Özen*, G. Mirac Bayhan, Department of Industrial Engineering, University of Dokuz Eylül, 35160 Buca-Izmir, Turkey
Nusrat T. Chowdhury1 and N. R. Dhar2, 1Post-Graduate student, 2Professor, Department of Industrial & Production Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka-1000, Bangladesh.
ID 51 Development of Mathematical Cost Model for Room Temperature End-milling of AISI D2 Tool Steel
Mohamed Elhadie1, A. N. Mustafizul Karim1, A. K. M. Nurul Amin1, Department of Manufacturing and Materials Engineering, International Islamic University Malaysia, Gombak, Kuala Lumpur 53100, Malaysia
A. Lajis2, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor Bahru 86400, Malaysia
ID 52 Soft Computing Control System of an unmanned airship
Ali Chekima, Wong Wei Kitt, Jamal Ahmad Dhargam, Farrah Wong Hock Tze, School of Engineering and Information Technology, Universiti Malaysia Sabah, Kota Kinabalu , Saba
ID 53 Analysis of Assembling Processes of a Car Cabin for Productivity Management
Usubamatov, A. R. Riza, M. N. Murad, School of Manufacturing Engineering, University Malaysia Perlis, Kampus Tetap Ulu Pauh, Jalan Arau – Changlun, 02600 Arau, Perlis, Malaysia
ID 54 Study on the Visual Identifiability of Taiwan Doorplate Designs
Shy-Peih Huarng Chien-Hsiung Chen Regina W.Y. Wang, Graduate School of Design, National Taiwan University of Science and Technology, Taipei, 10607, ROC
ID 55 Automation System Design and Cognitive Systems Engineering
Kudret Yurtseven, Yeditepe University, Istanbul, Turkey
Alireza Rahrooh, University of Central Florida, POBox 160000 Orlando, FL 32816 United States
Walter Buchanan, Texas A&M University, College Station TX 77843, Texas, USA
Seda Bas, Yeditepe University, Istanbul, Turkey
Neda Sadeghi, Mehdi Piltan, Seyed Farid Ghaderi, Department of Industrial Engineering, College of Engineering, University of Tehran, P.O. Box 11365-4563, Iran
Shiva Shakiba, Mehdi Piltan, Seyed Farid Ghaderi, Mohsen Sadegh Amalnik, Department of Industrial Engineering, University of Tehran, Tehran, Iran
ID 58 GUIDELINE FOR IMPROVING CAPACITY OF A JOB SHOP BASED ON SELECTED PERFORMANCE MEASURES
MD AMIRUL KHAIR SALEHUN, MASINE MD TAP & AWALUDDIN MOHAMED SHAHROUN
ID 59 An RFID-based Universal Lightweight Multi-Domain Auto-Monitoring System
Aniruddha Bhattacharjya, Department of Computer Science and Engineering, University of Calcutta, 92, A. P. C. Road, Kolkata 700 009, India
Rajat Kumar Pal, Department of Information Technology, School of Technology, Assam University, Silchar, PIN 788 011, India
ID 60 Uniform Fractional Part Algorithm And Applications
Elham Shadkam, Department of Industrial Engineering, K.N. Toosi University of Technology, Tehran, Iran
Abdollah Aghaie, Department of Industrial Engineering, K.N. Toosi University of Technology, Tehran, Iran
ID 61 A Proposed Classification of Data Mining Techniques in Credit Scoring
Abbas Keramati, Department of Industrial Engineering, University of Tehran, Tehran 1473984954, Iran
Niloofar Yousefi, Department of Industrial Engineering, University of Tehran, Tehran 1439955961, Iran
ID 62 Impact of technology on the design of back offices: An evolutionary perspective.
Ananth Rangarajan, Prof. Prakash Vaidya; Dept. of Industrial & Production Engineering. Vishwakarma Institute of Technology, University of Pune, Pune, 411037, Maharashtra, India.
Abul Mukid Mohammad Mukaddes1, Mohammed Khadem2, Ahad Ali3 and Sheikh K. Shah4
1,4 Shahjalal University of Science and Technology, Bangladesh
2 Sultan Qaboos University, Oman
3 Lawrence Technological University, USA
ID 64 Prediction Markets in the Energy Sector: a Case-Study
Filipe S. Silveira, Department of Industrial Engineering, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516, Portugal
António C. B. Grilo, UNIDEMI, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica, Portugal
ID 65 A DSS for Innovation Management: The Significance of the Innovation Determinants
Kemal Kilic, Faculty of Engineering and Natural Sciences, Sabanci University, Istanbul, Turkey
Caner Hamarat, Faculty of Technology, Policy and Management, Delft University of Technology, Delft, The Netherlands
ID 66 A structured methodology for Information Systems Outsourcing Decisions using Fuzzy MCDM
Miri-Nargesi, Department of Industrial and Mechanical Engineering, Qazvin Islamic Azad University, Qazvin, Iran
Keramati, A. Ansarinejad, S. Nazari-Shirkouhi, Department of Industrial Engineering, College of Engineering, University of Tehran, Iran
Gyutai Kim, Department of Industrial Engineering, Chosun University, Gwangju, 501-759, Korea
Suhee Jung, Department of Industrial Engineering, Chosun University, Gwangju, 501-759, Korea
ID 68 Profiling bank customers behaviour using cluster analysis for profitability
Reza Baradaran Kazem Zadeh, Industrial Engineering Department, Tarbiat Modares University,, Al- Ahmad Highway, Tehran, Iran.
Ahmad Faraahi, Information Technology Department, Payame noor University, Lashkarak Highway, Nakhl street, Tehran, Iran.
Amir Mastali, Information Technology Department, Payame noor University, Lashkarak Highway, Nakhl street, Tehran, Iran.
ID 69 Factors Influencing the E-commerce Performance of Large-scale Turkish Companies
Fethi Calisir, Cigdem Altin Gumussoy, Ozgur U. Eris, Industrial Engineering Department, Faculty of Management, Istanbul Technical, University, 34367 Macka-Istanbul, Turkey
ID 70 Acceptance of e-reverse auction use: An empirical comparison of models
Cigdem Altin Gumussoy Fethi Calisir, Industrial Engineering Department, Faculty of Management, Istanbul Technical, University, 34367 Macka-Istanbul, Turkey
ID 71 Service-Oriented Architecture and IT-Business Alignment
Jae Choi, Business Administration Program, Middle East Technical University, Northern Cyprus Campus, Turkey
(Ram) Ramamurthy, Sheldon B. Lubar School of Business, University of Wisconsin-Milwaukee, WI 53201, U.S.A.
ID 72 Developing Collaborative Key Performance Indicators for Manufacturing Collaboration
JinSung Lee, Ji Whan Jung, Sang-Kuk Kim, and Jae-Yoon Jung, Department of Industrial and Management System Engineering, Kyung Hee University, Yongin-si, Gyeonggi-do, 446-701, Republic of Korea
ID 73 Factors influencing the adoption of M-commerce: An exploratory Analysis
A.H.M. Saifullah Sadi, Lecturer, Faculty of Business, Sohar University, P.O. Box 44. PC 311, Sohar, Sultanate of Oman
Mohamad Fauzan Noordin, Associate Professor, Department of Information Systems, International Islamic University Malaysia, Gombak 53100, Kuala Lumpur, Malaysia
Base Stock Inventory Policy Decisions, Norbert S. Enriquez, Jason Ivan C. Haw, Kent Edward C. Tan, De La Salle University-Manila, Philippines
Dennis E. Cruz, Department of Industrial Engineering, De La Salle University-Manila, Philippines
ID 75 Healthcare Logistics Cost Optimization Using a Multi-criteria Inventory Classification
Lina Al-Qatawneh, Department of Industrial Engineering, Applied Science University, Amman 11931, Jordan
Prof. Khalid Hafeez, Dean of e-School of Business & Quality Management, Hamdan Bin, Mohammed e-University, Dubai 71400, UAE
ID 76 New Strategy for Warehouse Optimization – Lean warehousing
U.S.S. Dharmapriya, Department of Engineering Mathematics, University of Peradeniya, Sri Lanka
A.K.Kulatunga, Department of Production Engineering, University of Peradeniya, Sri Lanka
ID 77 Exploring Lean and Green Supply Chain Performance Using Balanced Scorecard Perspective
Susana Duarte; Rosário Cabrita; V. Cruz Machado, UNIDEMI, Departamento de Engenharia Mecânica e Industrial, Faculdade de Ciências e Tecnologia (FCT), Universidade Nova de Lisboa, 2829-516 Caparica, Portugal
Lincoln C. Wood, School of Information Systems, Curtin University of Technology, Perth, Australia
ID 79 Evaluating Simulation Software Alternatives through ANP
Zeki Ayağ, Department of Industrial Engineering, Kadir Has University, Fatih, İstanbul, 34083, TURKEY
ID 80 Dynamic Buffering of a Capacity Constrained Resource via the Theory of Constraints
Olufemi Adetunji, Kris Adendorff and VSS Yadavalli*, Department of Industrial and Systems Engineering, University of Pretoria, Hatfield, Pretoria 0002, South Africa
ID 81 Experimental Study of Manufacturing of Chemical De-scaling Materials
Niveen J. Abdalkadir, Lecturer Chief of engineer, University of Technology, Materials Engineering
Hussain M . yousif, Chief of engineer, Nasser state company, for mechanical industries/Central tool room plant
Seyed Mahdi Homayouni, Tang Sai Hong, Napsiah Ismail, Mohd Khairol A.M.K. Ariffin, Department of Mechanical and Manufacturing Engineering, Engineering Faculty, University Putra Malaysia, Selangor, 43400, Malaysia
ID 83 Cyclic Scheduling in a Job shop with Multiple Assembly Firms
Tetsuya Kanja and Koichi Nakade, Department of Industrial Engineering and Management, Nagoya Institute of Technology, Nagoya 466-8555, JAPAN
ID 84 A Novel PSO For Solving The VRPTW With Real Case Study
Shahrzad Amini, Department of Industrial Engineering, Islamic Azad University – South Tehran Branch, Tehran, Iran
ID 85 Configure-to-order (CTO) Product Development Process The Basis for True Customization
AHM Shamsuzzoha, Timo Kankaanpaa and Petri Helo, Department of Production, University of Vaasa, Vaasa, PO BOX 700, FI-65101, FINLAND
Mohammad Iqbal, Department of Industrial and Production Engineering, Shah Jalal University of Science and Technology, Sylhet-3114, BANGLADESH
ID 86 Development of Mathematical Cost Model for Preheated End-milling of AISI D2 Tool Steel
Mohamed Elhadie1, A. N. Mustafizul Karim1, A. K. M. Nurul Amin1, Department of Manufacturing and Materials Engineering, International Islamic University Malaysia, Gombak, Kuala Lumpur 53100, Malaysia
A. Lajis2, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor Bahru 86400, Malaysia
ID 87 Application of the Design Structure Matrix to Wheelchair Development
Mohammed Othman, Nadia Bhuiyan, Mechanical and Industrial Engineering Department, Concordia University, Montreal, Quebec, Canada H3G 1M8
Linghua Kong, Center for Assistive Technology & Environmental Access (CATEA), Georgia Institute of Technology, Atlanta, GA 30332-0156, USA
ID 88 Is R&D A Measure of Manufacturing Performance? Answer from Labor Intensive Industries
Shahidul. M.I, Department of Mechanical and Manufacturing Engineering, Universiti Malaysia Sarawak, 94330 kota Samarah
K. Chang,*, L. L. Shen, Z. L. Lin, F. C. Chi, Department of Safety Health and Environment Engineering, National Yunlin University of Science and Technology (NYUST), Yunlin 64002, Taiwan, R.O.C.
ID 90 A METHOD FOR OPTIMIZING THE RECONFIGURATION DESIGN TASK IN MANUFACTURING SYSTEMS
Farayi Musharavati, Department of Mechanical and Industrial Engineering, Qatar University, P.O. Box 2713, Doha Qatar
Mohsen. Baradari, Department of Industrial Engineering, Tafresh University, Tafresh, Iran
Ebrahim. Sharifi, Department of Industrial Engineering, Tafresh University, Tafresh, Iran
Majid. Sheikhmohammady, Department of Industrial Engineering, K. N. Toosi University of Technology, Tehran, Iran
ID 92 The New Algorithm to Randomization and Applications
Elham Shadkam, Department of Industrial Engineering, K.N. Toosi University of Technology, Tehran, Iran
Abdollah Aghaie, Department of Industrial Engineering, K.N. Toosi University of Technology, Tehran, Iran
Ananth Rangarajan, Prof. Prakash Vaidya; Dept. of Industrial & Production Engineering. Vishwakarma Institute of Technology, University of Pune, Pune, 411037, Maharashtra, India
ID 94 Determining the Best Fleet Sizing of a Container Terminal for a Given Layout
A.K. Kulatunga, R.A.D.S Mekala, M. A.R.A Luthfi, U.S.S Dharmapriya, A.S.W Wijesundara, A. Jayasundara, Department of Production Engineering, Faculty of Engineering, University of Peradeniya, Sri Lanka
U.S.S Dharmapriya, Department of Engineering Mathematics, Faculty of Engineering, University of Peradeniya, Sri Lanka
ID 95 Process Change Pattern Analysis in Collaborative Processes
Aekyung Kim and Jae-Yoon Jung, Department of Industrial and Management System Engineering, Kyung Hee University, Yongin-si, Gyeonggi-do, 446-701, Republic of Korea
Md. Abdulla Al Masud, Syed Mithun Ali, Dr. Nikhil Ranjan Dhar, Department of Industrial & Production Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka-1000, Bangladesh.
ID 97 Development of a Low Cost Portable Vending System for Prepaid Utility Meter
Mobaidul Islam, K. Hossain Ansary, S.M. Tofayel Ahmad, Liakot Ali, A. H. Chowdhury, S. M. Lutful Kabir, Institute of Information and Communication Technology, Bangladesh University of Engineering and Technology, Postcode 1000, Dhaka, Bangladesh
ID 98 The integration of QFD Technique and Value Engineering and its Applying in a Healthcare Center
Yegenegi, Islamic Azad University Zanzan Branch – Iran
M.Arasti, Sharif University Of Technology
M.Mousakhani, Islamic Azad University Qazvin Branch – Iran
ID 99 Safety Issues Improvement in Ceramic Lined Composite Pipe Produced Using SHS Method
Mahmoodian, R. Rahbari, M. Hamdi, Department of Engineering Design and Manufacture, University of Malaya, Kuala Lumpur, 50603, Malaysia
ID 100 Value-based heuristics in policy analysis of renewable energy pricing and its incentives
Ahmad Faizul Shamsudin, Department of Computer Science, Kulliyah (Faculty) of Information and Communication Technology, International Islamic University, P. O. Box 10, Kuala Lumpur
Amir Hisham Hashim, Assoc. Prof. Dr., Strategic Planning Department, Corporate Planning Division, Tenaga Nasional Berhad, Malaysia, P.O. Box , Kuala Lumpur
Abbas Keramati, Industrial Engineering Department, Faculty of Engineering, University of Tehran, Tehran, Iran
Alireza Nili, Department of Business Administration and Social Sciences, Division of Industrial, Marketing and e-Commerce, International University of Chabahar, Chabahar, Iran/Lulea University of Technology, Lulea, Sweden
ID 102 Potential Benefits of E-business on Economy and Infrastructural Development
Aftab Alam, Kingabdul Aziz University, Jeddah, KSA
Asma Zaheer, MIS MIMT UPTECHNICAL University, LKW, Greater Noida-UP India
ID 103 A Framework of Process Mining for RFID Event Analysis
Kyuhyup Oh, Jae-Yoon Jung, Department of Industrial and Management Systems Engineering, Kyung Hee University, Yongin-si, Gyeonggi-do, 446-701, Republic of Korea
ID 104 A Ubiquitous Process Coordination System for RFID/USN Events
Kyuri Kim, Kyuhyup Oh, Pablo Rosales, Jae-Yoon Jung, Department of Industrial and Management Systems Engineering, Kyung Hee University, Yongin-si, Gyeonggi-do, 446-701, Republic of Korea
ID 105 BAYESIAN INFORMATION UPDATE FOR RETAILER’S TWO-STAGE INVENTORY MODEL UNDER DEMAND UNCERTAINTY
Mohammad Anwar Rahman, Industrial Engineering Technology, The University of Southern Mississippi
Ahad Ali, Lawrence Technological University
Asheka Rahman, The University of Southern Mississippi
Alain Y.L Chong, Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hung Hom, Hong Kong
Felix T.S Chan, Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hung Hom, Hong Kong
Keng Boon Ooi, Faculty of Business & Finance, University Tunku Abdul Rahman, Jalan University, Bandar Barat, 31900, Kampar, Perak, Malaysia
ID 107 Association Rule Based Approach for Improving Operation Efficiency in a Randomized Warehouse
Hau Ling Chan, King Wah Pang, Department of Logistics and Maritime Studies, The Hong Kong Polytechnic University, Hung Hom, Hong Kong
Ka Wing Li, ExIT Solution Company, Hong Kong
ID 108 Supplier selection under the risk of supply disruptions
L. Meena, S. P. Sarmah, Department of Industrial Engineering & Management, Indian Institute of Technology, Kharagpur, India
Sarkar, Vinod Gupta School of Management, Indian Institute of Technology, Kharagpur, India
Carolina Billitteri and Giovanni Perrone, DTMPIG, Università degli Studi di Palermo, Viale delle Scienze, Ed. 8, 90128 Palermo, Italy
ID 110 Intermittent demand forecasting by using Neural Network with simulated data
Nguyen Khoa Viet Truong, Shin Sangmun, Vo Thanh Nha, Kwon Ichon, Department of Systems Management & Engineering, Inje University, Gimhae, 621-749, South Korea
ID 111 On Effective Use of Little’s Law in Deciding Order Quantity in Supply Chain
Motonari Tanabu, Beiyu Yang, Ryo Sato, International Graduate School of Social Sciences, Yokohama National University, Yokohama, Kanagawa 240-8501, Japan
King-Wah Pang, Chung-Lun Li Department of Logistics and Maritime Studies, The Hong Kong Polytechnic University, Hung Hom, Hong Kong
ID 113 Value-added services by third party logistics providers
Yangyan Shi and Tiru S. Arthanari, Department of Information Systems and Operations Management, The University of Auckland Business School, Auckland, 1142, New Zealand
ID 114 Value-added services by third party logistics providers
Yangyan Shi and Tiru S. Arthanari, Department of Information Systems and Operations Management, The University of Auckland Business School, Auckland, 1142, New Zealand
ID 115 Optimal location of RFID antennas in a courier express warehouse
Dario Pacciarelli, Andrea D’Ariano and Michele Scotto, Dipartimento di Informatica e Automazione, Università degli Studi Roma Tre, via della vasca navale, 79 – 00146 Roma, Italy
P.Suresh, Professor, Department of Mechanical Engineering, Muthayammal Engineering College, Rasipuram, Namakkal District, Tamilnadu, India.
R.Kesavan, Associate Professor, Department of Production Technology, Madras Institute of Technology, Anna University, Chennai, Tamilnadu, India.
ID 117 Customer Based Two Stage Credit Policies In A Supply Chain
Chandra K. Jaggi*, Mona Verma and Amrina Kausar, Department of Operational Research,, Faculty of Mathematical Sciences, New Academic Block, University of Delhi, Delhi-110007, India.
ID 118 Developing a hybrid algorithm for distribution network design problem
Firoozi*, S. H. Tang , M. K. M. A. Ariffin, Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor, Malaysia.
Sh. Ariafar, Department of Industrial Engineering, College of Engineering, Shahid Bahonar University, Kerman, Iran
ID 119 A Cross Entropy-Genetic Algorithm Approach for m-Machines No Wait Job-Shop Scheduling
Budi Santosa, Industrial Engineering Campus ITS Sukolilo, Surabaya
Muhammad Arif.Budiman, Industrial Engineering Campus ITS Sukolilo, Surabaya
Stefanus Eko Wiranto, Industrial Engineering Campus ITS Sukolilo, Surabaya
ID 120 Airline Emission Forecast Through Empirical Analysis of Its Contributing Factors
Muhammad Shaad Shaikh, Kingfisher Airlines, Mumbai, India
ID 121 A Non-Parametric Predictive Model for Missing Data: A Case of Philippine Public Hospitals
Victor John M. Cantor, Richard C. Li, Martha Lauren L. Tan, Rachelle Joy S. Yu, Department of Industrial Engineering, De La Salle University, Manila 1004, Philippines
ID 122 A Hybrid Algorithm for Multi Objective Flexible Job Shop Scheduling Problem
Elnaz Baghal Azardoost, Department of Industrial Engineering, Payam Noor University, Tehran, Iran
Nrges Imanipour, Department of Enterpreneur, Tehran University, Tehran, Iran
ID 123 A Genetic Algorithm for Fuzzy All-Pairs Shortest Path in a Network
Reza Hassanzadeh, Iraj Mahdavi*, Ali Tajdin, Department of Industrial Engineering, Mazandaran University of Science and Technology, Babol, Iran
Nezam Mahdavi-Amiri, Faculty of Mathematical Sciences, Sharif University of Technology, Tehran, Iran
Hosna Shafieian, Department of Computer Software Engineering, Mazandaran University of, Science and Technology, Babol, Iran
ID 124 A Genetic Algorithm for Fuzzy Shortest Path in a Network with mixed fuzzy arc lengths
Reza Hassanzadeh, Iraj Mahdavi *, Ali Tajdin, Department of Industrial Engineering, Mazandaran University of Science and Technology,
Babol, Iran, Nezam Mahdavi-Amiri, Faculty of Mathematical Sciences, Sharif University of Technology, Tehran, Iran
Alma Maria Jennifer Gutierrez, Angelo Canillas, Edgardo Cleto and Neil Uy, Industrial Engineering Department, De La Salle University-Manila, 2401 Taft Avenue, Malate, Manila Philippines
ID 126 Analysis Motorcycle Accidents Based on Environmental and Personal Factors
Glaiza Marie T. Flores, Maria Patricia T. Gotohio, and Noel Gabriel C.Paras, Rosemary R. Seva, Department of Industrial EngineeringDe La Salle University, Manila, Philippines
ID 127 Development of a Smart Workstation for an Assembly Task
Ashraf Shikdar* Department of Mechanical & Industrial Engineering, Sultan Qaboos University, P.O. Box 33, Al-Khod 123, Sultanate of Oman
Ibrahim Garbie, Department of Mechanical & Industrial Engineering, Sultan Qaboos University, P.O. Box 33, Al-Khod 123, Sultanate of Oman
Mohammad MR Khan Khadem, Department of Mechanical & Industrial Engineering, Sultan Qaboos University, P.O. Box 33, Al-Khod 123, Sultanate of Oman
ID 128 Gaining the Best Value of HR in Construction Companies
Mehrdad Arashpour, Graduate school of Management, Grenoble University, BP 127 – 38003, France
Mohammadreza Arashpour, School of Engineering, University of Borås, SE-501 90 Borås, Sweden
ID 129 The Influence of Ergonomics On Occupational Safety and Health (OSH) Legislation in Malaysia
Rozlina Md Sirat, Awaluddin Mohamed Shaharoun, Razak School of Engineering and Advanced Technology, Universiti Teknologi Malaysia City Campus, 54100 KL
Syed Abdul Hamid Syed Hassan, Department of Occupational Safety and Health, Block D3, Complex D, Federal Government Administrative Centre, 62530 Putrajaya, Selangor
Mohammad Iqbal1, Salma A. Iqbal1, A.N. Mustafizur Rahman2 and A.H.M. Samsuzzoha3
1Department of Industrial and Production Engineering,
1Department of Chemical Engineering and Polymer Science, Shah Jalal University of Science and Technology, Sylhet – 3114, Bangladesh
2Department of Manufacturing and Material Engineering, Kulliyah of Engineering, IIUM Jalan Gombak 53100 Kuala Lumpur, Malaysia
3Department of Production, University of Vaasa, PO Box 700, FI-65101 Vaasa, FINLAND
ID 131 Value Chain Analysis using Value Stream Mapping: White Good Industry Application
Hande ALACA, BSH Home Appliances, Istanbul , Turkey
Dr. Cemil CEYLAN, Department of Industrial Engineering, Management Faculty, Istanbul Technical University, ISTANBUL, 34357, TURKEY
ID 132 A framework for managing change in lean manufacturing implementation
Norani Nordin, Department of Technology Management, College of Business, Universiti Utara Malaysia
Baba Md Deros, Dzuraidah Abdul Wahab, Mohd Nizam Ab. Rahman, Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia
ID 133 Group Technology Application in Preventive Maintenance
Hamid Seifoddini, Associate Professor And Abdelhakim Abdelhadi, PhD Candidate, Industrial and Manufacturing Engineering Department, University of Wisconsin – Milwaukee, Milwaukee, Wisconsin
ID 134 Lean manufacturing best practices in SMEs
Rose, A.M.N., Deros, B.Md., Rahman, M.N.Ab. & Nordin, N., Dept of Mechanical and Materials Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia
ID 135 Transformation to Lean Production system of a Water Heater company in Oman
Mohammad Khadem, Abbas Al-Bulushi, Jaifar Al-Mazroui, Majid Al-Harthy & Zahir Al-Hashmi, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman
S.Majid Ebrahimi, Department of Industrial Engineering, Mazandaran University of Science and Technology, Babol, Iran
Amir Mastali, Department of Industrial Engineering, Mazandaran University of Science and Technology, Babol, Iran
Shahab Namazi, Department of Industrial Engineering, Shahid Beheshti University, Tehran, Iran.
ID 137 Monitoring Simple Linear Profiles in the Leather Industry (A Case Study)
Amirhossein Amiri, Department of Industrial Engineering, Shahed University, Tehran, Iran,
Ahmad Zand, Department of Industrial Engineering, University of Science and Culture, Tehran, Iran
Darya Soudbakhsh, Department of Industrial Engineering, Islamic Azad University-North Tehran Branch, Tehran, Iran,
Chiun-Ming Liu and Mei-Chin Wu, Department of Industrial Engineering and Systems Management, Feng Chia University, Taichung, TAIWAN
ID 139 Integrating data mining to robust design procedure for a large data set and noise factors
Vo Thanh Nha, Nguyen Khoa Viet Truong, Sangmun Shin*, Department of Systems Management & Engineering, Inje University, Gimhae, KN 621-749, South Korea
ID 140 ISO BENEFITS OF AN INDIAN GARMENT EXPORTER.
Krishnan Sriram, Research Scholar, Department of cooperation. Gandhigram Rural University, Gandhigram – 624302. INDIA.
Karim Atashgar and Rassoul Noorossana, Department of Industrial Engineering, Iran University of Science and Technology, Tehran, Iran
ID 142 Hazard Identification and Accident Analysis on City Gate Station in Natural Gas Industry
- Nikbakht, Department of Mechanical and Manufacturing, Faculty of Engineering, University Putra Malaysia, 43400, Serdang, Selangor, Malaysia
ID 143 Sensemaking Approaches to Improving Processes of Emergency Medical Trauma Centers
Policarpo C. deMattos, Eui H. Park, Daniel Miller, and Celestine Ntuen, Department of Industrial and Systems Engineering, North Carolina A&T State University, Greensboro, NC 27411, USA
ID 144 Predictive Cost Model for Utilizing Auto-Ambulator Rehab Machines
Marvin Rothwell, Eui Park, and Policarpo DeMattos, Department of Industrial & Systems Engineering, North Carolina A&T State University, Greensboro, NC, 27411 U.S.A
ID 145 Value Chain Analysis using Value Stream Mapping: White Good Industry Application
Hande ALACA, BSH Home Appliances, Istanbul , Turkey
Dr. Cemil CEYLAN, Department of Industrial Engineering, Management Faculty, Istanbul Technical University, ISTANBUL, 34357, TURKEY
ID 146 Applying systems engineering to create a population centred sleep disorders program
Linda Hathout M.Sc., P.Eng, B.A.Hon., Senior Process and Quality Improvement Engineer
Tina Tenbergen M.Sc. Program Analyst Internal Medicine,
Eleni Giannouli M.D., FRCPC, Director of the WRHA Sleep Disorders Centre, University of Manitoba, Winnipeg, Manitoba, R3G1R9 Canada
Helen Clark R.T., M.B.A., WRHA Director Respiratory Therapy & Patient Transport
Health Sciences Centre Winnipeg Manitoba R3G1R9 Canada
Daniel Roberts M.D., FRCPC, WRHA Medicine Program Director, Internal Medicine Department Head, University of Manitoba, Winnipeg, Manitoba, R3G1R9 Canada
ID 147 Improve Customer Complaint Resolution Process Using Six Sigma
Sanjit Ray, SQC and OR Division, Indian Statistical Institute, 8th Mile, Mysore Road, Bangalore 560 059, Karnataka, India.
Prasun Das, SQC and OR Division, Indian Statistical Institute, 203 B.T. Road, Kolkata 700 108, India
Bidyut Kr. Bhattacharya, Department of Mechanical Engineering, Bengal Engineering and Science University, Shibpur, Howrah 711103, India
ID 148 A Real-time Localization System Using RFID for Visually Impaired
Qinghui T.1, Malik M.Y.2, Youngjee H.1, Jinwoo P.1, Dept. of Industrial Engineering and ASRI1, Dept. of EECS2, Seoul National University, Seoul, Korea
Ibtinen Sediri, Nakade Koichi, Department of Industrial Engineering and Management, Nagoya Institute of Technology, Gokiso, showa-ku, Nagoya, Japan
ID 150 A Literary Review of Distribution Based Logistics in Operation Iraqi Freedom
Amanda Whitaker, Engineering Design II, Northrop Grumman Shipbuilding, Pascagoula, MS 39568
MD B. Sarder, Industrial Engineering Technology, The University of Southern Mississippi, 730 East Beach Blvd, Long Beach, MS 39560
Ahad Ali, Department of Mechanical Engineering, Lawrence Tech University, Southfield, Michigan 48075
Ahmad Sarfaraz, Manufacturing Systems Engineering and Management Department, California State University, Northridge, California 91330, USA
P.Suresh, Professor, Department of Mechanical Engineering, Muthayammal Engineering College, Rasipuram, Namakkal District, Tamilnadu, India.
R.Kesavan, Associate Professor, Department of Production Technology, Madras Institute of Technology, Anna University, Chennai, Tamilnadu, India.
ID 153 Modeling Supply Chain Management Information System Using ARIS Framework
Radwan, A., and Majid Aarabi, Department of Manufacturing and Industrial Engineering, Faculty of Mechanical, Engineering, Universiti Teknologi Malaysia, 81310 Skudai, Johor, MALAYSIA
ID 154 Model for Optimal Pricing and Capacity Allocation for a Firm Facing Market Cannibalization
Syed Asif Raza, Amna Yousef Al-Kuwari, Fatimah Abdullah Aloqayli, College of Business and Economics, Qatar University, Doha, Qatar
ID 155 Multi-criteria structured equation model on Strategic project management
Sorooshian, Z. Norzima, Department of mechanical and manufacturing engineering, University Putra Malaysia
Ya-Hui Lin, Department of Industrial Engineering and Management, Chin Min Institute of Technology, Toufen, Miaoli 35153, Taiwan
Yan-Chun Chen*, Department of Industrial Engineering and Management, Tungnan University, Shen-Keng, Taipei 22202, Taiwan
Kuldeep Chaudhary, Yogender Singh, P.C. Jha, Department of Operational ResearchUniversity of Delhi, Delhi,Delhi-110007, India
ID 158 Airline Crew Scheduling Using The Differential Evolution Method
Budi santosa, Indusrial Engineering, Kampus ITS Sukolilo, Surabaya
Andiek Sunarto, Indusrial Engineering, Kampus ITS Sukolilo, Surabaya
Arief Rahman, Indusrial Engineering, Kampus ITS Sukolilo, Surabaya
ID 159 Study of Electrochemical Polishing Applications in some alloys to obtain high surface finish
Niveen J. Abdalkadir, Lecturer Chief of engineer, University of Technology, Materials, Engineering
Hussain M . yousif, Chief of engineer, Nasser state company, for mechanical industries/Central tool room plant
Sabah Hussein Ali, Remote Sensing Center, University of Mosul
Ali Massaeli, M. Sc. Of Industrial Engineering – System Management and Productivity, Research & Technology Department, National Iranian Gas Company, Tehran, I.R. of IRAN
ID 162 Networking strategy for competitive advantage
Francesca Riccobono, Manfredi Bruccoleri, Giovanni PerroneDepartment of Manufacturing, Production and Management Engineering, University of Palermo, ITALY
ID 163 A Comparison of Purchase and Inventory Management System of two Educational Institutes
Sharif, Dean of Faculty Affairs Office, IIT Kanpur-208016. (India)
Ali Massaeli, M. Sc. Of Industrial Engineering – System Management and Productivity
Research & Technology Department, National Iranian Gas Company, Tehran, I.R. of IRAN
ID 165 Effective Colour Management for Textile Coloration- An instrumental way towards perfection
Zeeshan Khatri, Department of Textile Engineering, Mehran University of Engineering and Technology, Jamshoro, Pakistan
G Yasin Sheikh, Department of Industrial Engineering and Management, Mehran University of Engineering and Technology, Jamshoro, Pakistan
Khan Muhammad Brohi, Department of Energy and Environment Engineering, Mehran University of Engineering and Technology, Jamshoro, Pakistan
Aslam A Uqaili, Pro Vice Chancellor, Mehran University of Engineering and Technology, Jamshoro, Pakistan
A.M Leman, M.Z.M Yusof, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia 86400, Parit Raja, Batu Pahat, Johor, Malaysia
A.R Omar, Faculty of Mechanical Engineering, Universiti Teknologi MARA Malaysia, 40450 Shah Alam, Selangor, Malaysia
K.A Rahman, Department of Electrical Engineering, Politeknik Merlimau, 77300 Melaka, Malaysia
Abdullah M.S. Al-Rawahi, Suez Tractebel Operation and Maintenance Oman (STOMO), P.O. Box 134, Rusail, Oman
Hamdi A. Bashir, Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, Muscat, P.O. Box 33, Al-Khod, Oman
ID 168 Intellectual Capital In Development and Investment Banks of Turkey
Fethi Calisir, Cigdem A. Gumussoy, Faruk Cirit, A. Elvan Bayraktaroglu, Industrial Engineering Department, Istanbul Technical University, Istanbul, Turkey
ID 169 INVESTIGATION OF THE PERFORMANCE CHARACTERISTICS OF A ROTARY ELECTRONIC TABLET COUNTER
Adekunle Jinadu, Square Engineering Limited, Research Department, Joyfield Compound, Erinko Estate, c/o P O Box 225, Ota, Ogun State, Nigeria
ID 170 Break-even analysis in engineering projects: the case of a new technology application
Luis Javier Serrano Tamayo, School of Management, Universidad de los Andes, Bogotá, Colombia
ID 171 Modeling and Analysis of Bus Routing Operations at Kuwait Public Transport Company
Mehmet Savsar, Mawada Atash, Jafar Alnaqi, Kuwait University, College of Engineering & Petroleum, Industrial & Management Systems Engineering,P.O. Box 5969 Safat 13060 Kuwait
ID 172 Applicability of ARIMA Models in Wholesale Vegetable Market: An Investigation
Manish Shukla and Sanjay Jharkharia, Quantitative Methods and Operations Management, Indian Institute of Management Kozhikode
Department of Mechanical & Manufacturing Engineering, University Putra Malaysia, 43400 UPM Serdang, Malaysia
William M. Goriwondo*, Samson Mhlanga, Tapiwa Kazembe, Department of Industrial and Manufacturing Engineering, National University of Science and Technology, P.O. Box AC 939, Ascot, Bulawayo, Zimbabwe
ID 175 Cost Analysis for Used Products with Warranty and Preventive Repair
Sarada, Y.* and Mubashir Unnissa, M., Department of Mathematics, College of Engineering Guindy, Anna University, Chennai, India-600025
Samuel Telford, Muhammad Ilyas Mazhar and Ian Howard, Department of Mechanical Engineering, Curtin University, Perth WA 6102, Australia
ID 177 A hybrid Markov system dynamics approach for availability analysis of degraded systems
Meesala Srinivasa Rao, Department of Mechanical Engineering, GMR Institute of Technology, Rajam, Pin code: 532127Andhra Pradesh, India.
V.N. Achutha Naikan, Reliability Engineering Centre, Indian Institute of TechnologyKharagpur, Pin code: 721302, West Bengal, India
Ali Sayyah1, Baharudin BTHT2, N.Ismail3, 1, 2, 3 Department of Mechanical and Manufacturing, Engineering, Universiti Putra Malaysia, 43400 UPM, Serdang MALAYSIA
ID 179 Design of a Fuzzy Job Satisfaction Matrix with Dynamic Performance Criteria
Iraj Mahdavi, Hamed Fazlollahtabar*, Department of Industrial Engineering, Mazandaran University of Science and Technology, Babol, Iran
Nezam Mahdavi-Amiri, Faculty of Mathematical Sciences, Sharif University of Science and Technology, Tehran, Iran
Mohsen Arabmaghsudi, Norouz Kolbadinejad, Mazandaran Gas Company, Sari, Iran
Iraj Mahdavi, Hamed Fazlollahtabar, Department of Industrial Engineering, Mazandaran University of Science and Technology, Babol, Iran
Nezam Mahdavi-Amiri, Faculty of Mathematical Sciences, Sharif University of Science and Technology, Tehran, Iran
Mohsen Arabmaghsudi, Mohammad Hassan Yahyanejad, Mazandaran Gas Company, Sari, Iran
Hajej Zied, Dellagi Sofiene, Rezg Nidhal, INRIA Nancy Grand Est /LGIPM, University of Metz, Ile du Saulcy, 57045 Metz Cedex – FRANCE
Aries Susanty, Department of Industrial Engineering, University of Diponegoro, Semarang, 50268 , Indonesia
Diana Puspitasari, Department of Industrial Engineering, University of Diponegoro, Semarang, 50268 , Indonesia
Nia Budi Puspitasari, Department of Industrial Engineering,University of Diponegoro, Semarang, 50268 , Indonesia
Mutiara Rahma Sinthani Ninditarini, Department of Industrial EngineeringUniversity of Diponegoro, Semarang, 50268, Indonesia
ID 183 DEVELOPMENT OF AN FPGA BASED LOW POWER SYSTEM FOR DISPLAYING MUSLIM PRAYER TIME
S.M. Tofayel Ahmad, Md. Liakot Ali, Mohammad Bozlul Karim, Tania Sultana, Department of Information and Communication Technology, Institute of Information and Communication Technology, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
Md. Liakot Ali, Mohammad Bozlul Karim, S.M Tofayel Ahmad, Department of Information and Communication Technology, Institute of Information and Communication Technology, Bangladesh University of Engineering and Technology, Bangladesh
ID 185 FPGA IMPLEMENTATION OF AN AES PROCESSOR
Kazi Shabbir Ahmed, Md. Liakot Ali, Mohammad Bozlul Karim and S.M. Tofayel Ahmad, Institute of Information and Communication Technology, Bangladesh University of Engineering and Technology, Bangladesh
Tarek Q. Qasim, Tawfeq Al-Etaiwi, Mohammed Al-khasheb, Department of Industrial Engineering, Jordan University of Science and Technology, P. O. Box 3030, Irbid 22110, JORDAN
Au Yong Hui Nee, Suhaiza Hanim Mohamad Zailani Lilis Surienty Abdul Talib, School of Management Universiti Sains Malaysia, 11800 Minden, Pulau Pinang, Malaysia
Endang Chumaidiyah, Industrial Engineering Faculty, IT Telkom, Jl. Telekomunikasi No. 1, Ters Buah Batu, Bandung, Indonesia
ID 189 Study of innovativeness factors in Iranian automotive industry
Mohammad Vafaei, Department of Computer Engineering, Imam Javad University College, Yazd, Islamic Republic of Iran
Fatemeh Shakeri, Department of Industrial ManagementJahad University College, Yazd, Islamic Republic of Iran
Mohammad Saleh Owlia, Department of Industrial Engineering, Yazd University, Yazd, Islamic Republic of Iran
Kalaivani Chellappan, Faculty of Information Technology, UNIRAZAK (Universiti Tun Abdul Razak), Petaling Jaya, 47301, Selangor, Malaysia
Sundaraja Perumal Gothandapani, Equipment and Maintenance Department, Northport (Malaysia) Berhad, Port Klang, 42000, Selangor, Malaysia
Rosmaini Ahmad and Shahrul Kamaruddin, School of Mechanical Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang
ID 192 European Technical Directives in the Engineering Education
Prof. Dr. Atanas I. Lazarov, Faculty of Automation, Technical University of Sofia, Kliment Ohridski 8, 1000 Sofia, Bulgaria
ID 193 Challenges and Solutions for IPMSM to be Used as a Next Generation Electrical Machine
Shah Asifur Rahman, Department of Electrical and computer Engineering, University of Alberta, Edmonton, Alberta, Canada