Proceedings

ISSN: 2169-8767 (U.S. Library of Congress)                          ISBN: 

---

ID 003      IoT Based Security Management Framework for Heterogeneous Network Environment

Ajibo Chinenye Augustine, Chinaeke-Ogbuka Ifeanyi, Dogo Eustace, and Ogbuka Cosmas Uchenna, Department of Electronic Engineering, University of Nigeria Nsukka, Nigeria

ID 004      The Impact Of Workspace Design On Office Managers/Secretaries Satisfaction And Productivity: A Case Study Of Federal Polytechnic Kaura Namoda, Zamfara State

Maikudi Shehu Musawa, Department of Office Technology and Management, Federal Polytechnic, Kaura Namoda, Zamfara State.

Kamilah Ahmad, Faculty of Technology Management and Business, Universiti Tunn Hussein Onn Malaysia 

ID 005      A Study on Tea Industry and Areca Nut Market – A Case Study On Enhancing The Possible Strategies To Increase Sales And Spread Brand Awareness For Areca Market In Karnataka, India

Divya Bharathi, Research Scholar, Dept. of Management Studies, Ballari Institute of Technology And Management, Visveswaraya Technological University – Karnataka, India

Dr G. P. Dinesh, Professor & Chairman, DOMS, Vijayanagara Sri Krishnadevaraya University – Karnataka, India

ID 006      Applying Project and Programme Management Principles to the Manufacturing Competitiveness Enhancement Programme

Pule Kholopane and Thakaramahlaha Lehohla, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa

ID 007      Modeling of an Industrial Ecosystem at Traditional Shipyards in Indonesia for the Sustainability of the Material Supply Chain

Yugowati Praharsi 1, Muhammad Abu Jami’in 2 and Gaguk Suhardjito 3

1, 3 Business Management Department

2 Electrical Engineering Department

Shipbuilding Institute of Polytechnic Surabaya, Surabaya, Indonesia

Hui-Ming Wee, Industrial and System Engineering, Chung Yuan University, Chung Li, Taiwan

ID 008      Life Cycle Assessment of Ordinary Portland Cement (OPC) using Problem Oriented (Midpoint) Approach.

Busola Dorcas Olagunju and Oludolapo Akanni Olanrewaju, Department of Industrial Engineering, Faculty of Engineering and the Built Environment, Durban university of Technology, Durban, South Africa

ID 009      Use of Lean Six sigma (DMAIC) methodology to address down time in a paper company

Adefemi Omowole Adeodu, University of South Africa, Florida, South Africa

Mukondeleli Grace Kanakana-Katumba, University of South Africa, Florida, South Africa

ID 010      Improvement of Hospital Airborne Infectious Isolation Rooms using IoT technology   

Lance Abraham Roy, Vice Chairman South African Federation Hospital Engineers KZN and Post Grad Student University Johannesburg, Consulting Health Care Engineer- AI Engineers

ID 011      Thermal Modelling and Simulation of a Screw Extruder for Additive Manufacturing Technology

Ilesanmi Daniyana, Khumbulani Mpofua and Adefemi Adeodub, Department of Industrial Engineering, Tshwane University of Technology, Pretoria 0001, South Africa

Department of Mechanical & Mechatronics Engineering, Afe Babalola University, Ado Ekiti, Nigeria

ID 012      Approche Sécurité Système

Anouar Hallioui, Laboratoire des Techniques Industrielles, Centre d’Etudes Doctorales en Sciences et Techniques de l’Ingénieur – Faculté des Sciences et Techniques de Fès, Université SIDI MOHAMED BEN ABDELLAH, Fès, Morocco

Brahim Herrou, Ecole Supérieure de Technologie, BP. 2427 Route Imouzzer, Fès, Morocco

ID 013      Evaluating the Benefits of Project Alliance Formation among Contractors in Nigerian Construction Industry

Akinrata Ebunoluwa Bimbola, Department of Quantity surveying, Ahmadu Bello University Zaria, Nigeria

Bodunde Funmilayo Iyabo, Department of Quantity surveying, Federal University of Technology Akure, Nigeria

Ayotunde Anthony Babalola, Department of Quantity Surveying, Federal Polytechnic Ado-Ekiti, Nigeria

ID 014      Evaluating the Effect of Strategic Alliance Procurement Method on Construction Financial Performance in Nigeria

Bodunde Funmilayo Iyabo, Akinrata Ebunoluwa Bimbola and Ayotunde Anthony Babalola, Department of Quantity Surveying, Federal Polytechnic Ado-Ekiti, Nigeria

ID 015      Visual Project Management Tools and Practices: Supplier Company Case Study

Md Irfan Uzzaman, Industrial Engineering and Management, University of Oulu, Pentti Kaiteran katu 1, 90570 Oulu, Finland

Tasminur Mannan Adnan, Industrial Engineering and Management, University of Oulu, Pentti Kaiteran katu 1, 90570 Oulu, Finland

ID 016      Approche Fiabilité et Maintenabilité Système

Anouar Hallioui and Brahim Herrou, Laboratoire des Techniques Industrielles, Centre d’Etudes Doctorales en Sciences et, Techniques de l’Ingénieur – Faculté des Sciences et Techniques de Fès, Université Sidi Mohamed Ben Abdellah, Fès

ID 048      Benefits of functions interdependence between and autonomy of organization structure units: Case of small scale sandstones processing

Antoine F. Mulaba – Bafubiandi and Beejo Blessing Chauke

Mineral Processing and Technology Research Centre, Department of Metallurgy, School of Mining, Metallurgy and Chemical Engineering, Faculty of  Engineering and The Built Environment, University of Johannesburg, P.O Box 17911, Doornfontein, Johannesburg 2028, South Africa

ID 049      Possible impact of adequate organizational structure on the bottom line of artisanal and small-scale mineral business: case of sandstone processing. 

Antoine F. Mulaba – Bafubiandi and Beejo Blessing Chauke, Mineral Processing and Technology Research Centre, Department of Metallurgy, School of Mining, Metallurgy and Chemical Engineering, Faculty of  Engineering and The Built Environment, University of Johannesburg, P.O Box 17911, Doornfontein, Johannesburg 2028, South Africa

ID 050      Real-Time Simulation of Actual Systems for Live Continuous Research

Philemon Khoza and Antoine F. Mulaba – Bafubiandi, Mineral Processing and Technology Research Centre, Department of Metallurgy, School of Mining, Metallurgy and Chemical Engineering, Faculty of  Engineering and The Built Environment, University of Johannesburg, P.O Box 17911, Doornfontein, Johannesburg 2028, South Africa

ID 051      The Dichotomy Between Confidentiality and Collaboration in Making Data Public in The Mineral Industry

Philemon Khoza and Antoine F. Mulaba – Bafubiandi, Mineral Processing and Technology Research Centre, Department of Metallurgy, School of Mining, Metallurgy and Chemical Engineering, Faculty of  Engineering and The Built Environment, University of Johannesburg, P.O Box 17911, Doornfontein, Johannesburg 2028, South Africa

ID 052      Quantum Computing Philosophy in the Extraction of Cobalt from Cobalt-Copper Complex Ore

Antoine F. Mulaba – Bafubiandi and Divin Shabani

Mineral Processing and Technology Research Centre, Department of Metallurgy, School of Mining, Metallurgy and Chemical Engineering, Faculty of  Engineering and The Built Environment, University of Johannesburg, P.O Box 17911, Doornfontein, Johannesburg 2028, South Africa

ID 053      Attempt for an Expert Systems Leading to Intelligent Extraction of Cobalt and Copper from Co-Cu Complex Ore

Antoine F. Mulaba – Bafubiandi and Divin Shabani,

Mineral Processing and Technology Research Centre, Department of Metallurgy, School of Mining, Metallurgy and Chemical Engineering, Faculty of  Engineering and The Built Environment, University of Johannesburg, P.O Box 17911, Doornfontein, Johannesburg 2028, South Africa

ID 054      Simultaneous Resin and Coal Recovery from Coal Bearing Resin

Antoine Mulaba – Bafubiandi and Nokubonga G. Zulu, Mineral Processing and Technology Research Centre, Department of Metallurgy, School of Mining, Metallurgy and Chemical Engineering, Faculty of Engineering and The Built Environment, University of Johannesburg, 37 Nind Street Doornfontein, Johannesburg, 2028,Johannesburg, South Africa

ID 055      Geotechnical Properties of Power plant Ash and Re-cycled Plastic Waste Modified Bitumen on Asphalt Pavement.

Felix Okonta and Langeriwa Mthombeni, Department of Civil Engineering, University of Johannesburg, South Africa, 2000

ID 056      Strategies for Sustainability of John Taolo Gaetsewe District Municipality Towns (South Africa) Post-Mining

Bathusi Letsolo and Antoine F. Mulaba – Bafubiandi, Mineral Processing and Technology Research Centre, Department of Metallurgy, School of Mining, Metallurgy and Chemical Engineering, Faculty of  Engineering and The Built Environment, University of Johannesburg, P.O Box 17911, Doornfontein, Johannesburg 2028, South Africa

ID 057      Optimization of Electricity Consumption for a Galvanising Plant through Comparative Analysis of Regression Analysis And Genetic Algorithm

Mendon Dewa, Department of Industrial Engineering, Durban University of Technology, Durban, South Africa

ID 058      Strategies for Sustainability of John Taolo Gaetsewe District Municipality Towns Post Mining (South Africa)    

Bathusi Letsholo, Boksburg, Gauteng, South Africa

ID 076      An Analysis of the Inventory Management Challenges: The Case of Gypsum Plasterboard Manufacturing Company in South Africa

Madzivhandila Ntendeleni Lawrence and Forbes Chiromo, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa

ID 077      Wellhead Technology as a Solution to Long Gestation Period in Geothermal Power Development

Moses Jeremiah Barasa Kabeyi, and Oludolapo Akanni Olanrewaju, Department of Industrial Engineering, Faculty of Engineering and the Built Environment, Durban university of Technology, Durban, SA

ID 078      Design and Modelling of a Waste Hear Recovery System for a 250KW Diesel Engine for Cereal Drying

Moses Jeremiah Barasa Kabeyi, and Oludolapo Akanni Olanrewaju, Department of Industrial Engineering, Faculty of Engineering and the Built Environment, Durban University of Technology, Durban, SA

ID 079      Critical Assessment of Cobalt (Co) and Copper (Cu) Extraction from Co-Cu Complex Ores

Antoine Mulaba – Bafubiandi and Dorcas Ruvimbo Zingowo

Mineral Processing and Technology Research Centre, Department of Metallurgy, School of Mining, Metallurgy and Chemical Engineering, Faculty of Engineering and The Built Environment, University of Johannesburg, 37 Nind Street Doornfontein, Johannesburg, 2028,  South Africa

ID 080      A Phenomenological Study of Cobalt and Copper from the African Copperbelt Deposits

Dorcas Ruvimbo Zingowo and Antoine Mulaba – Bafubiandi, Mineral Processing and Technology Research Centre, Department of Metallurgy, School of Mining, Metallurgy and Chemical Engineering, Faculty of Engineering and The Built Environment, University of Johannesburg, 37 Nind Street Doornfontein, Johannesburg, 2028,  South Africa

ID 081      The Potential of Power Generation from Municipal Solid Waste

Moses Jeremiah Barasa Kabeyi, and Oludolapo Akanni Olanrewaju, Department of Industrial Engineering, Faculty of Engineering and the Built Environment, Durban university of Technology, Durban, SA

ID 082      Development of a Biogas Plant with Electricity Generation, Heating and Fertilizer Recovery Systems              

Moses Jeremiah Barasa Kabeyi and Oludolapo Akanni Olanrewaju, Industrial Engineering Department, Durban University of Technology, South Africa

ID 083      Optimization of Biogas Production for Optimal Abattoir Waste Treatment with Bio-Methanation as Solution to Nairobi Slaughterhouses Waste Disposal

Moses Jeremiah Barasa Kabeyi, and Oludolapo Akanni Olanrewaju, Department of Industrial Engineering, Faculty of Engineering and the Built Environment, Durban university of Technology, Durban, SA

ID 084      Disruptive teaching and learning, and assessing engineering students during a pandemic situation.

Antoine Mulaba – Bafubiandi, Mineral Processing and Technology Research Centre, Department of Metallurgy, School of Mining, Metallurgy and Chemical Engineering, Faculty of Engineering and The Built Environment, University of Johannesburg, 37 Nind Street Doornfontein, Johannesburg, 2028,  South Africa

ID 085      Market Risk and Market Value of Listed Deposit Money Banks in Nigeria

Ahmadu Abubakar, Department of Business Management, Federal University Dutsin-Ma, Katsina State, Nigeria

ID 086           An Analysis of the Problems Encountered in the Implementation and Maintenance of Lean Six Sigma at a Manufacturing Company in Namibia

David Shikulo, NUST, Windhoek, Khomas, Namibia

ID 087      Adaptive Radial Basis Function Artificial Neural Network Control for Two-Flexible-Link Robots

Francis Kunzi Tekweme, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa

ID 088      Accessibility to Bus Stops in University Campus: A Set Covering Approach

Eren Özceylan and İbrahim Miraç Eligüzel, Industrial Engineering Department, Gaziantep University, 27100, Turkey

ID 089      System Analysis of Portable Water Shortage in the Mpumalanga Province of South Africa

Motsi Ephrey Matlakala and Daramy Vandi Von Kallon, Mechanical Engineering Department, University of Johannesburg, Johannesburg, South Africa

ID 090      Systems Dynamic of Portable Water Shortage in the Limpopo Province of South Africa

Motsi Ephrey Matlakala and Daramy Vandi Von Kallon, Mechanical Engineering Department, University of Johannesburg, South Africa

ID 092      Applying technology to educational delivery and its management: lesson from Nigeria             

Babatunde Joel TODOWEDE, Lagos State University, Badagry Expressway, Lagos, Nigeria

ID 093      A sustainable conceptual model for pyrolysis to power project using lignocellulosic waste

Gratitude Charis, Gwiranai Danha and Edison Muzenda, Department of Chemical, Materials and Metallurgical Engineering, Botswana International University of Science and Technology, P Bag 016 Palapye, ‎Botswana

Edison Muzenda, Metallurgy and Chemical Engineering, University of Johannesburg, School of Mining, Doornfontein, Johannesburg, South Africa

ID 094      Measurement of Performance, Effort, Social Influence, Facilitation, Habit and Hedonic Motives toward Pay later Application Intention: Indonesia Evidence

Gidion P. Adirinekso, Department of Management Faculty Economics and Business, Universitas Kristen Krida Wacana, Jakarta, 11470 Indonesia
John Tampil Purba & Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang 15811, Indonesia

ID 095      Review and parameterization of make to stock items

Laura Stuart Lamarca Soares, Rodrigo Luiz Gigante and Henrique Ewbank de M. Vieira, Facens University, Sorocaba, SP Brazil

ID 096      The Gap between matric pass requirements and entrance to engineering education.

Baloyi Themba Amukelani and Muyengwa Goodwel, Department of Mechanical and Indusstrial Engineering, University of Johannesburg, South Africa

ID 097      Overview of Lean-Green Approach

Nada El Faydy and Laila El Abbadi, Computer Sciences, Logistics and Mathematics Department, National School of Applied Sciences- IBN TOFAIL University, Kenitra, Morocco

ID 111      The Nation Readiness in Facing Industry 4.0 viewed from Clean Water and High School Teacher Availability toward GDRP without Oil

John Tampil Purba and Sidik Budiono, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia

Gidion P. Adirinekso, Department of Management Faculty of Economics and Business, Universitas Kristen Krida Wacana, Jakarta, Indonesia

ID 112      Robust Least Squares Estimation Model for Fighting Poverty in Indonesia Case

Sidik Budiono, John Tampil Purba and Gidion P. Adirinekso, Department of Management Faculty Economics and Business, Universitas Kristen Krida Wacana, Jakarta, 11470 Indonesia

ID 113      Anomaly Detection on the High Throughput Network of the ATLAS DAQ System

Mitchell Phiri, Simon H.Connell, and Pathmanathan Naidoo, Department of Mechanical Engineering Science, University of Johannesburg, Johannesburg – 2006, South Africa

Mikel E. Pozo Astigarragay, ATLAS Trigger and Data Acquisition, European Organisation for Nuclear Research, Meyrin – 1217, Switzerland

Dave Nichollsz, NESCA Board, South African Nuclear Energy Corporation, North West Province – 0240, South Africa

ID 114      A Literature Review on Coal Gasification as Part Transition in SA Thermal Coal Power Generation 

P. Rannditsheni, P. Naidoo, and S.H. Connell, Department of Mechanical Engineering Science, University of Johannesburg, Johannesburg, RSA

D. Nicholls, Chairman, Nuclear Chapter, South African Institute of Electrical Engineers, Observatory, Johannesburg, RSA

ID 115      Understanding South Africa’s Independent Power Producer Programme

Naidoo and S.H.Connell, Department of Mechanical Engineering Science, University of Johannesburg, Auckland Park, Johannesburg, RSA

Nicholls, Chairman, Nuclear Chapter, South African Institute of Electrical Engineers, Observatory, Johannesburg, RSA

ID 116      A3 Problem Solving: A Case of Assembly Line Downtime

K. Kanyinda, Department of Industrial Engineering, Durban University of Technology, Durban, South Africa

I. J. Lazarus, Department of Physics, Durban University of Technology, Durban, South Africa

O. A. Olanrewaju, Department of Industrial Engineering, Durban University of Technology, Durban, South Africa

ID 117      Development of an Asset Criticality Assessment Tool, the Case of a Fertiliser Manufacturing Company

Milton Masukume, Samson Mhlanga, and Tinashe Mubvirwi, Department of Industrial and Manufacturing Engineering, National University of Science and Technology, PO Box AC 939, Ascot, Bulawayo, Zimbabwe

Tawanda Mushiri, Industrial and Mechatronics Engineering Department, Faculty of Engineering and the Built Environment, University of Zimbabwe,630 Churchill Avenue, Harare, Zimbabwe

ID 118      Analysis of a Rectangular Actiflo Clarifier under Hydrostatic Pressure via FEA

P. Maqina, D.V.V Kallon, F. Tekweme and R. Mutyavavire, Department of Mechanical Engineering Technology, University of Johannesburg, Johannesburg, South Africa

ID 119      Investigating the Optimal Stiffener Locations of an Actiflo Clarifier under Hydrostatic Pressure

P. Maqina, Department of Mechanical Engineering Technology, University of Johannesburg, Johannesburg, South Africa

D.V.V Kallon, Department of Mechanical Engineering Technology, University of Johannesburg, Johannesburg, South Africa

ID 120      Research and Development Team of Sustainable Green Environment Initiative           

Olowosile J. Sanmi, Olowosile O. Ruth, Adeleke E. Olubunmi, Odiase E. Titus, Adedokun A. Victoria, Ogunsola A. Oluwatosin, Makinwa Olusegun, and Orisabinone Toluwalase, Research and Development Team, Sustainable Green Environment (SGE) Initiative, Lagos, Nigeria

ID 121      Simulation of an Acoustic Device for Online Cleaning of Boilers at Sasol Synfuels Power Station In Secunda 

Purity Mimi Shandu and Daramy Vandi von Kallon, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa

ID 122      Cost Analysis of Soot Blower Use for Boiler Maintenance at Sasol Secunda

Purity Mimi Shandu, Daramy Vandi von Kallon, and Goodwell Muyengwa, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa

ID 123      Design of Electro-Hydraulic Circuits of Tri-adjustable Automated Heavy-Duty Industrial Handling System

S.Z. Mafokwane, Department of Mechanical Engineering Technology, Universtity of Johannesburg, Johannesburg, South Africa.

D.V.V. Kallon, Department of Mechanical Engineering Technology, University of Johannesburg, Johannesburg, South Africa

ID 124      Simulation of Manchester Triage System in a Brazilian Hospital

Alan Vitor Cunha, Franklin Leonardo dos Santos, Henrique Ewbank de M. Vieira and Rodrigo Luiz Gigante, Production Engineering Department, Facens University, Sorocaba, BRAZIL

ID 125      Improvement in the manufacturing process

Anthony de Souza Sene, Rodrigo Luiz Gigante and Henrique Ewbank de M. Vieira, Facens University, Sorocaba, SP Brazil

ID 132      Finite Element Analysis on Multiple Axes of 3D Designs

D.W. Abbot, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa

D.V.V. Kallon, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa

ID 133      Finite Element Analysis of a Simulated Object vs 3D Printed Object

D.W. Abbot, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa

D.V.V. Kallon, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa

ID 134      Investigation of Radial Expansion of Hollow Tubular Devices for Support of Underground Mining Excavations

N. Tshitema, D. V. V. Kallon and O. T. Laseinde, Department of Mechanical and Induistrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa

ID           135        A preliminary environmental analysis for a pinedust pyrolysis system

Gratitude Charis, Botswana international University of Science and Technology , Palapye, Botswana

ID 146      Inventory Management Impact on Demand Uncertainty and Forecasting in Fast Moving Consumer Goods

Ndivhuwo Nemtajela, Department of Operations Management, University of South Africa, 1 Preller Street, Pretoria, South Africa

ID 147      Analysis of Factors Affecting Behavior of Students Online Shopping (Case: Diponegoro University)

Zainal Fanani Rosyada, Naniek Utami Handayani, Manik Mahacandra, Ega Rizkiyah. Department of Industrial Engineering, Diponegoro University, Semarang, 50275, Indonesia

ID 148      Enhancing nanocrystalline material yield strength during ARB process by using Solute atoms as reinforcement

P.B. Sob, Department of Mechanical Engineering, Faculty of Engineering and Technology, Vaal University of Technology, Vanderbijlpark, South Africa

ID 149      The effects of the different approaches of measuring size of nanocrystalline materials on their thermodynamic properties

B. SOB, Department of Mechanical Engineering, Faculty of Engineering and Technology, Vaal University of Technology, Vanderbijlpark, South Africa

ID 150      Implementation of a Cloud-Based ERP System at a South African Public Entity

B.M.B Cebekhulu 1, P.A. Ozor 1, 2, and C. Mbohwa 1

1 Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, Auckland Park, Johannesburg, South Africa

2 Department of Mechanical Engineering, Faculty of Engineering, University of Nigeria Nsukka

ID 151      A Framework for a Reconfigurable Welding Jig for Sheet Metal Panel Component of a Railcar

Ilesanmi Daniyana, Makinde Olasumbob, Boitumelo Ramatsetsea and Khumbulani Mpofua

Department of Industrial Engineering, Tshwane University of Technology, Pretoria, 0001, South Africa

Department of Operations Management, Tshwane University of Technology, Pretoria, 0001, South Africa

ID 152      Smart sustainable manufacturing: From Literature review to a green framework         

Imane Benkhati, Casablanca, Grand Casablanca, Morocco

ID 153      2DOF flexible Link Manipulator Model Simulation Inventor: Finite Element Analysis with varying payloads at the tip.

XS Nyathi and FK Tekweme, Department of Mechanical and Industrial Engineering, University of Johannesburg, 55 Beit St, Doornfontein, Johannesburg 2028, South Africa

ID 154      A Case Study on Teesta Water Conflict: A Game Theory Approach

Faisal Mahmud, Esrat Farhana Dulia and Anindya Sen, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh

ID 155      Pre and Post Privatisation Assessment of Transcorp Power Gas Turbine Plants using Standard Key Performance Indicators

Okoye, Arinze. E., Department of Mechanical Engineering, University of Benin, Benin City, Nigeria

ID 166      The Relationship between Kaizen Philosophy and Organizational Performance Empirical Investigation: A Case of Ethiopian Manufacturing Industries

Haftu Hailu, Fasil Taddese and Kinfe Tsegay, Department of Industrial Engineering, Ethiopian Institute of Technology, Mekelle University, Mekelle, Tigray, Ethiopia

Kassu Jilcha, Industrial Engineering Department, Addis Ababa Institute of Technology (AAiT), Addis Ababa University, Addis Ababa, Ethiopia

Tewodros Hailu, Mechanical Engineering Department, Axum University (AU), Axum, Tigray, Ethiopia

ID 167      An Overview of Nanomanufacturing with Bibliometric Indicators

A. Almarfadi, Fawaz M. Abdullah and Abdulrahman M. Al-Ahmari, Industrial Engineering Department, College of Engineering, King Saud University, P. O. Box 800, Riyadh 11421, Saudi Arabia

Wadea Ameen, Industrial Engineering Department, College of Engineering and Architecture, Al Yamamah University, Riyadh-11512, Saudi Arabia

Galal M. Muthanna, Business Administration Department, Faculty of Social and Applied Sciences, The University of Aden, Aden – 6312, Yemen

ID 170      Ergonomic Assessment for a Convenience Store Assistant

Nor Suhada Abdullah, Koay Mei Hyie, Siti Nur Amalina Mohd Halidi, Hamid Yusoff, Ahmad Sufian Abdullah, Halim Ghafar, Aliff Farhan Mohd Yamin

Faculty of Mechanical Engineering,

Universiti Teknologi MARA, Cawangan Pulau Pinang, Kampus Permatang Pauh, Pulau Pinang, Malaysia

ID 171      Optimization of Traffic control on roadways      

S.Udaya Bhaskar, Dean Academics, Malla Reddy Engineering College (Autonomous), Telangana – 500100, India

ID 172      A Review of Logistics 4.0 Literature for Curriculum Development for Vocational High Schools

Kerem Elibal, BCS Metal Co., Gaziantep, Turkey

Eren Özceylan, Industrial Engineering Department, Gaziantep University, Gaziantep, Turkey

ID 173      A Rapid Decision Model of Disaster Relief Logistic, based on Internet of Things (IoT) Data Analytics and Case-Based Reasoning

Dachyar, Yadrifil, and Maulana Ihsan Al Ghifari, Industrial Engineering Department, Universitas Indonesia, Indonesia

ID 174      Comparative Experimental Performance Evaluation of Longitudinal and Transverse Four-Pass Soda Can Solar Air Heaters

Ifeanyi O. Jacobs, Chigbo A. Mgbemene, Agwu Ndukwe, Anthony O. Okoani and Ndudim H. Ononiwu, Mechanical Engineering Department, University of Nigeria Nsukka

ID 175      Optimizing the Weight of Crawler Chain System at Quarry during Cement Manufacturing Process

A. O. ANIKI, 1 O. A. OLANREWAJU, 2 C. MBORHWA

Vaal University of Technology: P.M.B X021, Vanderbijlpark, 1900. Gauteng. South Africa

1 Durban University of Technology: P.O.BOX 1334, Durban, Kwa-Zulu Natal, 4000

2 Universisity of Johannesburg: Auckland Park Bunting Road Campus, Johannesburg, 2031

ID 178      Automated Waste Characterisation and Sorting for Large Institutions through Conceptualisation, Design and Simulation

Sudhir S. Zhuwawu, Department of Mechanical Engineering, University of Zimbabwe, P O Box MP 167, Mount Pleasant, Harare, Zimbabwe

Wilson R. Nyemba and Simon Chinguwa, Department of Mechanical Engineering, University of Zimbabwe, P O Box MP 167, Mount Pleasant, Harare, Zimbabwe and Department of Quality and Operations Management, University of Johannesburg, Auckland Park 2006, Auckland Park Campus, South Africa

ID 179      The Lighter the Better: Weight Reduction in the Automotive Industry and its Impact on Fuel Consumption and Climate Change

Gibson P Chirinda, Department of Industrial and Manufacturing Engineering, National University of Science and Technology, Bulawayo, Zimbabwe

Stephen Matope, Department of Industrial Engineering, University of Stellenbosch, Stellenbosch, South Africa

ID 180      Electrification through Renewable Resources in a Rural Area in Nigeria: Design, Optimization and Techno-Economic Evaluation

Aliyu Adamu Baba1, 2, Md Mizanur Rahman 1 and Aminuddin Saat 1

1 School of Mechanical Engineering, Faculty of Engineering, University Technology Malaysia, 81310 Johor Bahru, Johor, Malaysia

2 Department of Mechanical Engineering, Federal Polytechnic Mubi,  Adamawa State, Nigeria

ID 181      Health 2.0: A Digital Platform to Transform Gweru District Health System

M Shumba, and S Mhlanga, Department of Industrial and Manufacturing Engineering, National University of Science and Technology, Midlands, Zimbabwe

ID 182      Feasibility and Optimization of Plastic Waste Energy Recovery Process as a Plastic Waste Management Tool in Zimbabwe

Tafadzwa Shumba and Samson Mhlanga, Department of Industrial and Manufacturing Engineering, National University of Science and Technology

Bulawayo, Zimbabwe

Mufaro Moyo, Department of Fibre and Polymer Materials Engineering, National University of Science and Technology, Bulawayo, Zimbabwe 

ID 183      Proposed Roadmap for Product and Process Redesign in the Migration from Joining Processes to Monolithic parts Production for Sheet-metal Components

Blessed Sarema, Department of Industrial and Manufacturing Engineering, National University of Science and Technology, Bulawayo, Zimbabwe

Stephen Matope, Industrial Engineering Department, Stellenbosch University, Cape Town, South Africa

ID 184      Application of Small Modular Reactors in Sub Saharan Africa

D. Nicholls, Chairman, Nuclear Chapter, South African Institute of Electrical Engineers, Observatory, Johannesburg, RSA

P. Naidoo and S.H.Connell, Department of Mechanical Engineering Science, University of Johannesburg, Auckland Park, Johannesburg, RSA

ID 196      The Relation between Renewable Energy Consumption and Economic Growth: The Case of 3 Mediterranean Countries

Majd ALLAM, PhD Energy and Environment, Sapienza – University of Rome, Italy

Domenico Borello, Associate Professor in Mechanical and Industrial Aerospace Department, Sapienza – University of Rome, Italy

Raymond Bou Nader, PhD in mathematics, USJ – Beirut, Lebanon

ID 197      Contradictions and Complements of Lean Administration and Digitalization

Christoph Szedlak, Kristin Wagner, and Bert Leyendecker, University of Applied Sciences Koblenz, Faculty of Operations Management, Konrad-Zuse-Str. 1, 56075 Koblenz, Germany

ID 198      Optimization of Cutting Parameters in Turning of AISI 201 Stainless Steel to Reduce Chip Reduction Coefficient in both Dry and Wet Condition

Tareq Ahmad and Toukir Ahmed, Md. Didarul Alam, and Md. Ariful Islam, Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology, Rajshahi-6204, Bangladesh

ID 199      SMART Performance Management of SA’s UN Climate Change Commitments

S. Zuma, Eskom SOC Limited RSA, Generation Division, South Africa

p. Naidoo and N. Sukdeo, Faculty of Engineering and the Built Environment, University of Johannesburg, Auckland Park, Johannesburg, RSA

ID 200      The Role of Entrepreneurship Study In Developing The Abilities of Students To Be Young Entrepreneurs: Empirical Study In Universitas Negeri Medan, Indonesia

Haikal Rahman, Department of Business Digital, Universitas Negeri Medan, Medan, Indonesia

Rahmatsyah, Department of Physics, Universitas Negeri Medan, Medan, Indonesia

Ali Fikri Hasibuan, Department of Entrepreneurship, Universitas Negeri Medan, Medan, Indonesia,

Rangga Restu Prayogo, Department of Entrepreneurship, Universitas Negeri Medan, Medan, Indonesia

Gaffar Hafiz Sagala, Department of Business Digital, Universitas Negeri Medan, Medan, Indonesia

ID 201      Investigations into Solar Powered Stirling  Engines for Electricity  Generation

P. Khoza, P. Naidoo and S.H.Connell, Department of Mechanical Engineering Science, University of Johannesburg, Auckland Park, Johannesburg, RSA

ID 202      Role of Industry 4.0 in Supplier Selection

Priyanka Verma, and G S Sagar, NITIE – National Institute of Industrial Engineering, Mumbai, India

Vijaya Dixit, Indian Institute of Management, Ranchi, India

ID 203      Application of Lean Tools in Planned Maintenance: Case Study of a Coal Handling Plant at a Thermal Power Station

Isaac Chinhengo, William M. Goriwondo, and Blessed Sarema, Department of Industrial and Manufacturing Engineering, National University of Science and Technology, Bulawayo, Zimbabwe

ID 204      Computational Fluid Dynamics and Simulation of a Mixing Mould Unit of a Mini Foam Batch Production Plant

O. J. Oyejide1, J. Achebo 2, M. O. Okwu1, 3, and L.Tartibu 3

1 O. J. Oyejide, Department of Mechanical Engineering, Federal University of Petroleum Resources Effurun, Delta State, Nigeria

2 J. Achebo, Department of Production Engineering, University of Benin, Nigeria

3 M. O. Okwu and L.Tartibu, Department of Mechanical and Industrial Engineering, University of Johannesburg, South Africa

ID 205      Development of a Mixing and Mould Unit for Mini Foam Batch Production Plant

1 Department of Mechanical Engineering, Federal University of Petroleum Resources Effurun, Nigeria.

2 Department of Production Engineering, University of Benin, Nigeria.

3 Department of Mechanical and Industrial Engineering, University of Johannesburg, South Africa

ID 206      The State of Rail and Road Route Transport Networks Integratedness in the City of Johannesburg: An expose

Brightnes Risimati, Urban and Regional Planning Department, University of Johannesburg, City of Johannesburg, South Africa

Trynos Gumbo, Urban and Regional Planning Department, University of Johannesburg, City of Johannesburg, South Africa

James Chakwizira, Urban and Regional Planning Department, University of Venda, Venda, South Africa 

ID 207      Flagging Appropriate Relay Alarms in SCADA Relay Alarm Monitoring & Analysis Systems

Judy Finny and Aldo McLean, Engineering Management & Technology Department, University of Tennessee at Chattanooga, Chattanooga, TN 37403, USA

ID 208      Investigating the role of benchmarking as a cost control measure: Lessons from selected restaurants in Johannesburg, South Africa

Gumbo. M, Musakwa. W, Ingwani. E, Gumbo.T, Johannesburg, Gauteng, South Africa

ID 209      Challenges and Strategies in NPOs’ Operations during Covid-19

Hilda Kundai Chikwanda, Graduate School of Technology Management, University of Pretoria, Hatfield, 0028, RSA

ID 210      Effective Conversion of Waste Cotton Textile by Acid Hydrolysis to Produce Ethanol Using Saccharomyces Cerevisiae.

Maud Gracious Fuko and Itai Mutadza, School of Engineering and Technology, Department of Chemical and Process Systems Engineering,

Harare Institute of Technology, Belvedere, Harare, Zimbabwe

ID 213      Multifactor Algorithm for Evaluating Applicability of Preventive Maintenance: Case of ABInBev NamibiaGeser       

Hityasha Okahandja, Otjozondjupa, Master of Industrial Engineering, Department of Mechanical and Marine Engineering, School of Engineering, Namibia University of Science and Technology, Namibia

ID 214      Factors affecting the Level of ICT innovation in Tanzania

Edison Wazoel Lubua, Senior Lecturer and Certified Information Systems Auditor, Department of Informatics, Institute of Accountancy Arusha,

Njiro Hill, Arusha-Tanzania

ID 215      Conceptualization of the Lecture ‘Digitalization and Digital Transformation in Metal Forming’ based on Implications from Contemporary Teaching and Learning Theories

Benjamin J. Ralph, Chair of Metal Forming, Montanuniversitaet Leoben, Franz Josef-Strasse 18, 8700 Leoben, Austria

Corina Pacher, Resources Innovation Center, Montanuniversitaet Leoben, Franz Josef-Strasse 18, 8700 Leoben, Austria

Manuel Woschank, Chair of Industrial Logistics, Montanuniversitaet Leoben, Erzherzog Johann-Strasse 3/1, 8700 Leoben, Austria 

ID 216      Challenges of Logistics and Supply Chain Management during COVID -19

Piya Ghosh and RRK Sharma, Industrial and Management Engineering, Indian Institute of Technology, Kanpur, India

ID 217      Automotive assembly industry’s Supply chain in the delocalization context: A critical review and an algorithm approach for modeling at a tactical level

Noredine Sadki and Zoubir El Felsoufi, Laboratory of Mathematical Modeling and Control, Faculty of Sciences and Technologies of Tangier, Tangier, Morocco

Sanae Larioui, ENSIT engineering school Morocco

ID 218      Implementation Barriers in the Establishment and Management of Bumdesa in Deli Serdang City, Indonesia

Nelly Armayanti, Department of Office Adminsitration, Universitas Negeri Medan, Medan, Indonesia

Dodi Pramana, Department of Office Adminsitration, Universitas Negeri Medan, Medan, Indonesia

Indra Maipita, Department of Business Education, Universitas Negeri Medan, Medan, Indonesia

Rangga Restu Prayogo, Department of Entrepreneurship, Universitas Negeri Medan, Medan, Indonesia

ID 219      Plastic waste management in South Africa

Unatshilidzi Benedictus Khangale, Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, Doornfontein Campus, 2092, South Africa

Paul Amaechi Ozor, Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, Doornfontein Campus, 2092, South Africa and Department of Mechanical Engineering, Faculty of Engineering, University of Nigeria, 410001, Nsukka Enugu State, Nigeria

Charles Mbohwa, Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, Doornfontein Campus, 2092, South Africa

ID 220      Exploring the Dimensions using Exploratory Factor Analysis of Disruptive Factors and Inventory Control

Aamir Rashid Hashmi, Noor Aina Amirah and Yusnita Yusof, Faculty of Business and Management, Universiti Sultan Zainal Abidin, Kuala Terengganu, Malaysia

ID 221      Management of Innovation in a Weapon Manufacturing Company

Pfarelo Precilla Nelufule and Hilda Kundai Chikwanda, Graduate School of Technology Management, University of Pretoria, Hatfield, South Africa

ID 222      Modal and Stress analysis of Centrifugal pump impeller produced with Al-3.7%Cu-1.4%Mg-1.5%wtRice husk ash nanoparticles composite

Paul. A Ozor 1, 3 and Victor .S Aigbodion1, 2

1Faculty of Engineering and Built Environment, University of Johannesburg, Auckland Park, 2006, South Africa

2Energy materials research group, Department of Metallurgical and Materials Engineering, University of Nigeria, Nsukka, Nigeria

3Department of Mechanical Engineering, University of Nigeria, Nsukka, Nigeria

ID 223      Rice Husk Waste: As Potential Coating Materials of Mild Steel for Engineering Application

1,2 Victor S.  Aigbodion and Paul. A Ozor 2,3

1 Energy materials research group, Department of Metallurgical and Materials Engineering, University of Nigeria, Nsukka, Nigeria

2 Faculty of Engineering and Built Environment, University of Johannesburg, Auckland Park, 2006, South Africa

3 Department of Mechanical Engineering, University of Nigeria, Nsukka, Nigeria

ID 224      Intelligent Traffic Light Control

Mohammed A. Khasawneh and Anjali Awasthi, Concordia Institute for Information Systems Engineering, Concordia University, Canada, Montreal

ID 225      Minimization of Yarn Breakage Rate in Looming Process Using Parameter Optimization Techniques

Muluken Abebe, M.Sc., Faculty of Mechanical and Industrial Engineering, Bahir Dar Institute of Technology, Bahir Dar, Ethiopia

ID 226      Assessments of the Internet of Things and Security

Farid El Ghaoual, Assad CHAHBOUN and Naoufal RAISSOUNI, National School of Applied Science, Abdelmalek Essaâdi University, Tetouan B.P. 2117, Morocco

ID 227      Energy Transition and Environmental Benefit of Fuel Cell Electric Vehicles

Muhammad Nadeem Akram and Walid Abdul-Kader, Mechanical, Automotive, and Materials Engineering Department, University of Windsor, Windsor, Ontario, Canada

ID 228      Evaluating the Factors Contributing to Unethical Practices by Quantity Surveyors in Nigerian Construction Industry

Akinrata Ebunoluwa Bimbola, Department of Quantity surveying, Ahmadu Bello University Zaria, Nigeria

Ayodeji Oke and Bodunde Funmilayo Iyabo, Department of Quantity surveying, Federal University of Technology Akure, Nigeria

Ayotunde Anthony Babalola, Department of Quantity Surveying, Federal Polytechnic Ado-Ekiti, Nigeria

ID 229      Application of Ant Colony Optimizer (ACO) for effective path planning in a big-box store or retail facility

Modestus O. Okwu1, 2, Justice Afenogho 1, and Tartibu K. Lagouge 2

1 Department of mechanical Engineering, Federal University of Petroleum Resources Effurun, Delta State, Nigeria

2 Department of Mechanical and Industrial Engineering, University of Johannesburg, South Africa

ID 230      Application of Value Stream Mapping in the Improvement of Lead Time, Takt Time and Over Flowing Labour in Paper Manufacturing Company: A Lean Six Sigma Approach

Adefemi Omowole Adeodu, Department of Mechanical and Industrial Engineering, University of South Africa, Florida, South Africa

Mukondeleli Grace Kanakana-Katumba, Department of Mechanical and Industrial Engineering, University of South Africa, Florida, South Africa

Rendani Maladzhi, Department of Mechanical and Industrial Engineering, University of South Africa, Florida, South Africa

ID 231      The Decision Model of Internet of Things (IoT) Solutions for Healthcare based on Risk and Challenge Factors

M Dachyar and Nabila Alya Zahra, Industrial Engineering Dept, Universitas Indonesia, Depok, Indonesia

ID 232      Optimization of Plantation and Forestry Management in Various Countries Using a Dynamic Model Approach: A Review

Nurhayati Sembiring, Humala Lodewijk Napitupulu, Meilita Tryana Sembiring, Aulia Ishak Sipahutar, and Rhyval Radot R, Department of Industrial Engineering, Faculty of Engineering, Universitas Sumatera Utara, Medan, Indonesia

ID 233      The Impact Of Customer Focused Innovative Technologies On Passenger Growth For A Domestic Low-cost Carrier Airline

Modisha Maribe, School of Mechanical, Industrial and Aeronautical Engineering, University of the Witwatersrand, Johannesburg, South Africa

Bernadette Sunjka, School of Mechanical, Industrial and Aeronautical Engineering, University of the Witwatersrand, Johannesburg, South Africa

ID 234      E-Procurement Process Reengineering for Prohibiting the Corruption Initiatives by Proposing a Real-Time and Integrated Bidding Solution

Dachyar and Frisly Karenina, Industrial Engineering Department, Universitas Indonesia, Indonesia

ID 235      Hospital Pharmaceutical Vendor Managed Inventory Supported by Internet of Things

M. Dachyar and Rebecca Yolanda, Department of Industrial Engineering, Universitas Indonesia, Depok, Indonesia

ID 250      Understanding industrial energy sources: A comparison between Electricity and Natural Gas using LMDI

Rofhiwa Tevin Machivha Department of Industrial engineering Durban University of Technology P.O Box 1334, Durban, 4000 South Africa

Oludolapo Akanni Olanrewaju Department of Industrial engineering Durban University of Technology P.O Box 1334, Durban, 4000 South Africa

ID 251      Utilization of Cornstalk Fiber into the Styrofoam Matrix as a Preliminary Study for Earthquake Resistant Particleboard 

Flora Elvistia Firdaus and Rico Andreansyah, Department of Chemical Engineering, Jayabaya University, Jakarta Timur- 13210, Indonesia

ID 252      Study of Electromyography Sensor Attachment Locations for Designing of Smart-fitness Clothing

Yong-Ku Kong, Kyeong-Hee Choi, Chae-Won Park, Seoung-Yeon Kim, Min-Jung Kim and Min-uk Cho, Department of Industrial Engineering, Sungkyunkwan University, 2066, Seobu-ro, Jangan-gu, Suwon-si, Gyeongi-do 16419, Korea

ID 253      A numerical analysis of airflow efficiency of a mine ventilation aircrossing

Johannes Selwana, Thokozani Justin Kunene, and Lagouge Kwanda Tartibu, Mechanical and Industrial Engineering Technology Department, University of Johannesburg, Doornfontein Campus, Johannesburg 2028, South Africa

ID 254      Numerical analysis of Vertical Axis Wind Turbine performance at varied Angle-of-Attack

Thokozani Justin Kunene, Mossa Maculove and Lagouge Kwanda Tartibu, Mechanical & Industrial Engineering Technology Department, University of Johannesburg, Doornfontein Campus, Johannesburg, South Africa

ID 255      Critical Risk Factors of Outsourcing in Supply Chains

Viktoria Barany, Julia Galus, Franca Hiemisch and Shahryar Sorooshian, Department of Business Administration, University of Gothenburg, Gothenburg, Sweden

ID 257      Blockchain-Enabled Campus Wine Supply Chain

Hannah Casper, Allison Jung, Aria Saberi and Mohamed Awwad, Department of Industrial and Manufacturing Engineering, California Polytechnic State University, San Luis Obispo, CA 93407, USA

ID 258      Enhancement of Supply Chain Performance by Data Analytics

Himadri Sen Gupta, A.I.M Johurul Islam, MD. Mushfiquzzaman and B M Adnan Rahman, Department of Industrial and Production Engineering, Military Institute of Science and Technology (MIST), Dhaka – 1216, Bangladesh

ID 259      Determinant Factors of Consumer Preferences on Electronic Wallet Users in Bandung

Imanuddin Hasbi, Romat Saragih, Benny Kurnia, Mahendra Fakhri, and Alisha Gustiana Aini, School of Communication and Business Telkom University, Indonesia

ID 260      A Bi-Objective Lot of Sizing and Scheduling Problem Dealing with Reworking the Perishable Items in a Parallel Machine System

Elham Taghizadeh, Department of Industrial and System Engineering, Wayne State University, Detroit, MI 48035, USA

Setareh Torabzadeh and Abdollah Mohammadi, Systems Engineering and Engineering Management Department, University of North Carolina at Charlotte, Charlotte, NC, 29223, USA

ID 261      Green Brand Awareness Factors on the Body Shop Product

Nadya Moeliono, Devilia Sari, Benny Kurnia, Mahendra Fakhri, and Diaz Adia Anindita, School of Communication and Business Telkom University, Indonesia

ID 262      Validation of the Lean Six Sigma Model for Higher Education Institutions through Implementation of Improvement Projects

David Guerrero, Cali, Valle del cauca, Colombia

David Rodrigo Guerrero Moreno

Juan Camilo García Jiménez

ID 263      Lifetime Extension of Distributed Power Networks by Evaluating the Joint Gaussian Probabilities of the Power Coverage of Generators to Load Centers Demand

Amir J. Majid, Ph.D., College of Engineering and Information Technology, University of Science and Technology of Fujairah, Fujairah, 2202, UAE 

ID 264      Impact of Virtual Clustering of Organizations on Organization’s Competitive Advantage: A Supply Chain Point of View

Robert Monageng, Mechanical Engineering Department, University Botswana, Gaborone, Botswana and Department of Industrial and Systems Engineering, University of Pretoria, Pretoria, South Africa

Olufemi Adetunji, Department of Industrial and Systems Engineering, University of Pretoria, Pretoria, South Africa

ID 265      DMAIC Six-Sigma Application in Management Productivity ‘Gap’ Reduction in Manufacturing Production Line

Jean-Claude Munyaka Baraka and Venkata Seshachala Sarma Yadavalli, Department of Industrial and System Engineering, University of Pretoria, Pretoria, 0002, South Africa

ID 266      Adaptation of Hybrid Strategy in Healthcare Supply Chain

Himadri Sen Gupta, Azraf Shahriar Sami, Md. Istiak Habib and Hasib Ur Rahman, Department of Industrial and Production Engineering,  Military Institute of Science and Technology (MIST),  Dhaka – 1216, Bangladesh

ID 267      Monitoring and Air Quality Control for Occupational Safety and Health in Fertilizer Production Companies in Zimbabwe

Itai Mutadza Tawanda W. Nhando and Perkins Muredzi, School of Engineering and Technology, Department of Chemical and Process Systems Engineering, Harare Institute of Technology, Belvedere, Harare, Zimbabwe

ID 268      Analysis of a Two-Stage Variable Leg Geometry Solar Thermoelectric generator

Chika Maduabuchi, Kevwe Ejenakevwe, Ifeanyi Jacobs, Agwu Ndukwe, and Chigbo Mgbemene, Department of Mechanical Engineering, University of Nigeria, Nsukka, Nsukka, Nigeria

ID 269      Optimal Sitting of Interconnected Mini-Grid in Electricity Distribution Network Using Interval Type-2 Fuzzy Analytic Hierarchy Process

Akintunde K. Akinlabi, Department of Industrial and Production Engineering, University of Ibadan, Ibadan Nigeria

Victor O. Oladokun, Department of Industrial and Production Engineering, University of Ibadan, Ibadan Nigeria

ID 270      The Effect of Easy Perception and Risk of Users of Financial Technology Services in SMEs of Bandung, Indonesia

Budi Rustandi Kartawinata and Mahir Pradana, Telkom University, Jalan Terusan Buah Batu, Bandung 40257, Indonesia

Aldi Akbar, Politeknik Piksi Ganesha Bandung, Jalan Jend. Gatot Subroto No. 301, Bandung 40274

Arlin Ferlina Mochamad Trenggana, Telkom University, Jalan Terusan Buah Batu, Bandung 40257, Indonesia

Synthia Dewi Cahyaningrum, Telkom University, Jalan Terusan Buah Batu, Bandung 40257, Indonesia

ID 271      The Effect  Of Green Human Resources Management  On Service Quality  In The Pandemic Time Of Covid-19 On State-Owned Enterprise Hospitals The Republic Of Indonesia  

Asep Saifudin, Student of the Mercu Buana University Doctoral Program, Jakarta, Indonesia

Havidz Aima, Professor and Head of the Doctoral Program at Mercu Buana University, Jakarta, Indonesia

Achmad Hidayat Sutawidjaya and Sugiyono, Postgraduate Lecturer at Mercu Buana University, Jakarta Indonesia

ID 279      The Effect of E-Service Quality on E-Satisfaction: Case Study of Lazada Users in Pekanbaru, Indonesia

Aditya Wardhana, Telkom University, Jalan Terusan Buah Batu, Bandung 40257, Indonesia

Budi Rustandi Kartawinata, Telkom University

Jalan Terusan Buah Batu, Bandung 40257, Indonesia

Diki Wahyu Nugraha, Prodi/Jurusan D4 Teknik Informatika Politeknik Pos Indonesia, Jln. Sari Asih No. 54, 40151 Bandung, Jawa Barat, Indonesia

Iqbal Firmansyah, Trisakti School of Transportation Management, Indonesia, Jakarta, Indonesia

Galang Tegar Prahara, Telkom University, Jalan Terusan Buah Batu, Bandung 40257, Indonesia

ID 284      Innovation as Part of the Strategy for Businesses during COVID-19

Yara A. Elkhalil, Department of Management and International Management, Colorado State University – Global Campus, Greenwood Village, CO 80111

ID 285      Reflection of the Virtual Learning Environment in the Covid-19 Pandemic Period

Haerul, Andoyo Sastramiharjo, Vismaia S. Damaianti and Yeti Mulyati, Universitas Pendidikan Indonesia, Bandung, Indonesia

ID 286      The Use Of E-Learning In Maritime English Learning Can Improve The Vocabulary Skill Of Cadets Majoring In Electro-Technical Officer Shipping 

Muhammad Ikhsan  Setiawan  Surabaya East Java Indonesia

ID 287      Curriculum and learning;

Gunawan  Santoso Student from Education University Indonesian (UPI), Bandung, and Lecturer Muhammadiyah of Jakarta University (UMJ), Jakarta, Indonesian

Pay LPDP KemenKeu RI

ID 288      The Effect of Compensation and Transformational Leadership on Job Satisfaction mediated with Job Motivation

Umar Yeni Suyanto1, Mu’ah 2, Ika Purwanti 3, Muhammad Dzikri Abadi 4, Agung Hirmantono 5, and Mokhtar Sayyid 6

1 Taxation Department, STIE KH. Ahmad Dahlan, Lamongan. 62218

2 Management Department, STIE KH. Ahmad Dahlan Lamongan, 62218

3 Management Department, STIE KH. Ahmad Dahlan Lamongan, 62218

4 Management Department, STIE KH. Ahmad Dahlan Lamongan, 62218

5 Accoutancy Department, STIE KH. Ahmad Dahlan Lamongan, 62218

6 Taxation Department, STIE KH. Ahmad Dahlan, Lamongan. 62218

ID 289      Distribution of Day Fish in Ternate City Water Based on Chlorophyll-a    

Syahnul Sardi Titaheluw 1, Arson Batilambu 2, Umar Tangke 3, Rovina Andriani 4, and Raismin Kotta 5

1 Department of Fisheries Product Technology, Faculty of Agriculture, Muhammadiyah University North Maluku. Jln KH Ahmad Dahlan, Sasa, South Ternate, Ternate City, North Maluku Province, Indonesia

2 Student of the Department of Fisheries Product Technology, Faculty of Agriculture, Muhammadiyah University North Maluku. Jln KH Ahmad Dahlan, Sasa, South Ternate, Ternate City, North Maluku Province, Indonesia

3 Department of Fisheries Product Technology, Faculty of Agriculture, Muhammadiyah University North Maluku. Jln KH Ahmad Dahlan, Sasa, South Ternate, Ternate City, North Maluku Province, Indonesia

4 Agriculture Department, Faculty of Marine Science and Fisheries, Khairun University. Jl. Pertamina Campus II Unkhair Gambesi Village, District of South Ternate, Ternate, North Maluku province, Indonesia

5 Ternate Field Research Station, Center for Oceanographic Recearch – Indonesian Institute of Sciences. Jl Pertamina, Sasa, Ternate Selatan, Ternate City, North Maluku Province, Indonesia

ID 290      An investigative study of mentoring programs for new entry graduates employees in the South African construction industry

Morena William Nkomo and Wellington Didibhuku Thwala, Department of Construction Management and Quantity Surveying, University of Johannesburg, Johannesburg. RSA

Clinton Ohis Aigbavboa, Department of Construction Management and Quantity Surveying, University of Johannesburg, Johannesburg. RSA

ID 291      Drivers and Barriers of Supply Chain 4.0 Implementation

Stella Nwakuchi Ngwaba Adare and Shahryar Sorooshian, Department of Business Administration, University of Gothenburg, Gothenburg, Sweden 

ID 292      Blockchain and the Internet of Things: A Literature Review

Ashutosh Devulkar and Mohammed Awwad, Industrial and Manufacturing Engineering Department, California Polytechnic State University, San Luis Obispo, CA 93407, USA

ID 293      Optimation the Process and Production of Polyurethane Foam from Soybean Oil

Flora Elvistia Firdaus, Department of Chemical Engineering, Jayabaya University, Jl.Pulomas Selatan Kav 23, Jakarta Timur- 13210, Indonesia

Muhammad Dachyar, Department of Industrial Engineering, Universitas Indonesia, Kampus UI Depok – 16424, Indonesia

ID 295      Implementation of a Semi-Automated Model to Accelerate the Rate of Kaizen in Film Packaging Industry

Matshidiso Moso, Oludolapo A. Olanrewaju and Mendon Dewa, Department of Industrial Engineering, Durban University of Technology, Durban, South Africa

ID 296      An Investigation On The Level Of Use Of Lean Principles In The Small And Medium Enterprises; The Case Of The South African Construction Industry: Literature Review

Davison Makondo and Forbes Chiromo, Department of Industrial Engineering, University of Johannesburg, Doornfontein, 2028, South Africa

ID 297      Era of Digital Technology: Analysis of factors contributing to economic growth and sustainability

Ayanda Ndou and Nelson Sizwe Madonsela, Department of Quality and Operations Management, University of Johannesburg,  Corner Kingsway and University Road, Auckland Park, South Africa

Bhekisipho Twala, Faculty of Engineering and Built Environment, Durban University of Technology, South Africa, Greyville, Durban, RSA

ID 298      A Review on Improving Performance Through Digital Transformation: A study of Best Technologies and Key Success Factors

M. F. M. Fairoos, Department of Industrial Management, University of Kelaniya, Kelaniya 11600, Sri Lanka

W. A. M. Niranga,Lecturer, Department of Industrial Management, University of Kelaniya, Kelaniya 11600, Sri Lanka

R. Wickramarachchi, Senior lecturer, Department of Industrial Management, University of Kelaniya, Kelaniya 11600, Sri Lanka

ID 299      Analysis of Critical Determinants of Supply Chain Resilience for Perishable Foods Using Fuzzy TOPSISCRITIC method: An Overview of the Poultry Industry

Md. Galib An-Noor Amio and Naquib Mahmud Chowdhury, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh

ID 300      Design, Modelling and Analysis of an App Controlled Smart Waiter

Md. Galib An-Noor Amio, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh

ID 301      An Analysis of the Problems Encountered in Implementing and Maintaining Lean Six Sigma at a Manufacturing Company in Namibia

David Meke Shikulo and Forbes Chiromo, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa

ID 303      A Cost Analysis of a Biomass Supply Chain for Sustainable Aviation Fuel in South Africa

Shivani Sooklal, School of Mechanical, Industrial and Aeronautical Engineering, University of the Witwatersrand, Johannesburg, South Africa

Bernadette Sunjka, School of Mechanical, Industrial and Aeronautical Engineering, University of the Witwatersrand, Johannesburg, South Africa

ID 304      Automatic Detection of Surface Defects in Fused Deposition Modeling (FDM) using Computer Vision and Deep Learning

Naquib Mahmud Chowdhury and Md. Galib An-Noor Amio, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh

ID 306      Addressing Covid-19 in Higher Learning Institutions through Implementing Cryptocurrency Payments Based on Blockchain Technologies

Chimuka Moonde, Jackson Phiri, Computer Science Department, University of Zambia, Lusaka, P.O. Box 32379, Zambia

ID 307      Assessment of mentoring on retention of workers and Human Resource Management in the construction sector: A Literature review

Morena William Nkomo and Wellington Didibhuku Thwala, Department of Construction Management and Quantity Surveying, University of Johannesburg, Johannesburg. RSA

Clinton Ohis Aigbavboa, Department of Construction Management and Quantity Surveying, University of Johannesburg, Johannesburg. RSA

ID 308      Designing e-Commerce Supply Chains

Tri Pujadi, Yosafati Hulu, and Tumar, Information Systems Departments – School of Information Systems, Bina Nusantara University, Jakarta, Indonesia

Vikas Kumar, Bristol Business School, University of the West of England, Bristol, BS16 1QY, UK

Bachtiar H. Simamora, Department of Management Binus Business School, Bina Nusantara University, Jakarta, Indonesia

ID 309      The Applications of ordering materials using Time Series Forecasting with CB Predictor

Tri Pujadi, Yosafati Hulu, and Tumar, Information Systems Departments – School of Information Systems, Bina Nusantara University, Jakarta, Indonesia

ID 310      Analysis of Automotive Product Selection in Indonesia:  Factors of Brand Image Using Analytical Hierarchy Process

Mahir Pradana, Bandung, Jawa Barat, Indonesia

ID 318      A Predictive Model For The Management Of Digital Marketing Within Social Media.

Lynda Salem and and Mohamed Tayeb Laskri, Computer Science Department, Badji Mokhtare University, Annaba, 23000, Algeria

ID 319      Developing an Analytical Framework for Assessing the Relationship between Quality Management Practices and Organisational Performance in the Namibian Shipping Sector

Paulus Andela and Dr. Michael Sony, Department of Mechanical & Marine Engineering, Namibia University of Science & Technology, Windhoek, Namibia

ID 320      Competencies in the Digitalized Working Environment: A Concept for Engineering Education in Higher Education Institutions

Corina Pacher, Resources Innovation Center, Montanuniversitaet Leoben, Franz Josef-Strasse 18, 8700 Leoben, Austria

Manuel Woschank, Chair of Industrial Logistics, Montanuniversitaet Leoben, Erzherzog Johann-Strasse 3/1, 8700 Leoben, Austria

ID 321      Ant Colony Optimization for Solving Capacitated Vehicle Routing Problem in a Carton Manufacturing Company

Basit Mahmud Shahriar, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh

ID 322      The Effect of Transportation Infrastructure on Economic Development

Ejiogu, Emmanuel Okechukwu, Nelson Sizwe Madonsela & Adedotun Adetunla, Department of Quality and Operations Management

University of Johannesburg, Corner Kingsway and University Road, Auckland Park, South Africa

ID 323      Impact of the integrated management system on business strategy: Critical success and failure factors, and implementation framework

Patrick Toyo and Nelson Sizwe Madonsela, Department of Quality and Operations Management, University of Johannesburg, Corner Kingsway and University Road, Auckland Park, South Africa

ID 324      Sustainability Assessment in Aviation Industry: A Mini- Review on the Tools, Models and Methods of Assessment

Eman R. Elhmoud, Engineering Management Program, College of Engineering, Qatar University, Doha, Qatar

Adeeb A. Kutty, Mechanical and Industrial Engineering Department, College of Engineering, Qatar University, Doha, Qatar

ID 325      Modeling of the logistical processes of a hospital supply chain: The case of HUC of BENGUERIR

Fatima OUZAYD, Smart System Laboratory (SSLab), ENSIAS Mohamed V University Rabat, Morocco

Kawtar RETMI, Center of Biological and Medical Sciences, CIAM, Mohamed VI Polytechnic University (UM6P), 43 150 Ben-Guerir, Morocco

ID 326      Ambidexterity in Industrial Engineering Technology Education

Ngaka Mosia, Department of Mechanical and Industrial Engineering, University of South Africa, Gauteng, Johannesburg, SA

ID 327      The Dilemma of Productivity Improvement Initiatives

Ngaka Mosia, Department of Mechanical and Industrial Engineering, University of South Africa, Gauteng, Johannesburg, South Africa

 

ID 329      Application of big data strategies for process optimization in a Healthcare environment [A case of patient data management in Hospital]

Ngaka Mosia, Department of Mechanical Engineering and Industrial, University of South Africa, Gauteng, Johannesburg, SA

ID 330      Harnessing Engineering Talent through Application Oriented Teaching and Learning In Universities of Technology

Ngaka Mosia, Department of Mechanical and Industrial Engineering, University of South Africa, Gauteng, Johannesburg, SA

ID 331      Incorporation and Design of a New Facility in a Country-wide Logistics Network

Oscar E. Ricaño, Héctor A. Lozano, José C. Moreno, and Jenny Díaz-Ramírez, Universidad de Monterrey, San Pedro Garza García, Nuevo León, 66238, Mexico

ID 332      Accessing Production Machine Technology Flexibility Potential

Ngaka Mosia, Department of Mechanical and Industrial Engineering, University of South Africa, Gauteng, Johannesburg, SA

ID 333      Analyzing Human Errors Responsible for a Pressure Vessel Failure             

Mfundo Nkosi, University of Johannesburg, Johannesburg, Gauteng, South Africa

ID 334      Agent-Based Modeling for Internet of Things (IoT) Application in a Retail Pharmacy Industry

Mohammed Basingab, Usamah Balamesh, Rayan Bafaqih, Osama Alamoudi, Abdulbari Hesiki, and Abdulrhman Alghefari, Industrial Engineering Department, King Abdulaziz University, Jeddah, 22252, Saudi Arabia

ID 335      Potential Role of Sugar Mills in the Peruvian Development

Maximiliano Arroyo Ulloa, Industrial Engineering Department, Santo Toribio of Mogrovejo Catholic University, Chiclayo, Peru

Maira Arroyo Lujan, Management Department, Decorlux SAC Enterprises, Lima, Peru

Javier Beltran Reyes, Business Intelligence Department, Comercio Group, Lima, Peru

ID 336      Strategic Integrated Transport for growth and development strategy in South Africa: A case of Rea Vaya BRT

Mamogege Desiree Sekgale and Nelson Sizwe Madonsela, Department of Quality and Operations Management, University of Johannesburg, Corner Kingsway and University Road, Auckland Park, South Africa

ID 337      Selection Criteria for a Tobacco Curing Solar Thermal Collector Energy System in Zimbabwe

Nelson Shati, Ignatio Madanhire and Tawanda Mushiri, Department of Mechanical Engineering, University of Zimbabwe, Mount Pleasant, Harare, Zimbabwe

Emmanuel Mashonjowa, Department of Physics, University of Zimbabwe, P. O. Box MP167, Mount Pleasant, Harare, Zimbabwe

ID 344      Communication Model in Blended Learning Using Telegram Applications

Kawakibul Qamar and Erik Teguh Prakoso, University of Kanjuruhan, Malang, Indonesia

Veronika Nugraheni Sri Lestari, University of Dr. Soetomo, Surabaya, Indonesia

Ifit Novita Sari, University of Islam Malang, Indonesia

ID 345      Start Up E-Business ‘COFFEE FOR SALE’ Mobile Base Application

Tri Pujadi, Faisal Fahmi, and Surianto, Information Systems Departments – School of Information Systems, Bina Nusantara University, Jakarta, Indonesia

Bachtiar H. Simamora, Department of Management Binus Business School, Bina Nusantara University, Jakarta, Indonesia

ID 346      Development of Green Maintenance Strategy of Coal-Fired Power Plants in the Philippines

Marvin I. Noroña, School of Industrial Engineering and Engineering Management, Mapua University, Manila, Intramuros, Manila 1002, Philippines.

A.J.D. Alamag – Rosales, School of Industrial Engineering-Engineering Management (EI-EMG), Mapua University, 658 Muralla St.,Intramuros, Manila 1002, Philippines

ID  347        Evolution of Strategic Indian Defence     

PARUL MEHTA, India

ID 348      E-procurement Application for a Distributor Company

Tri Pujadi, Yosafati Hulu, and Tumar, Information Systems Departments – School of Information Systems, Bina Nusantara University, Jakarta, Indonesia

ID 349      Integration and Analysis of Heat Exchangers and Refrigeration Units for Outdoor Drinking Water through Industrial Secondment at Pretoria Portland Cement          

Roy Mushonga, Harare, Mashonaland, Zimbabwe

ID 351      A situational Analysis of Transport Usage in Zambia: A Modal Perspective of Railway Freight Services from 1960’s to 2018

Chikusela Sikazwe, Graduate School of Business, University of Zambia, Lusaka, Zambia

Erastus Mishengu Mwanaumo, Department of Civil and Environmental Engineering, School of Engineering, University of Zambia, Great East Road, Lusaka, Zambia

Mwewa Mambwe, Department of Construction Management and Quantity Surveying, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa

Richard Kasongo Mwale, Graduate School of Business, University of Zambia, Lusaka, Zambia

ID 352      An Investigation of Factors Causing Schedule Overrun in Telecommunication Projects in Zambia

Mwewa Mambwe, Department of Construction Management and Quantity Surveying, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa

Erastus Mishengu Mwanaumo, Department of Civil and Environmental Engineering, School of Engineering, University of Zambia, Lusaka, Zambia

Bupe Getrude Mwanza, Graduate School of Business, University of Zambia, Great East Road, Lusaka, Zambia

Epheso Sibalwa, Nokia Zambia Limited, Lusaka Zambia

ID 353      Effectiveness in the Contract Management Performance within the Lusaka Provincial Administration – A Balanced Scorecard Application

Erastus Mishengu Mwanaumo, Department of Civil and Environmental Engineering, School of Engineering, University of Zambia, Great East Road, Lusaka, Zambia

Mwewa Mambwe, Department of Construction Management and Quantity Surveying, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa

Micheal Kalumbu Nsefu, Zambia Weights and Measures Agency, Lusaka, Zambia

Jacqueline Daka, University of Lusaka, Lusaka, Zambia

Bupe Getrude Mwanza, Graduate School of Business, University of Zambia, Great East Road, Lusaka, Zambia

ID 354      Risk Analysis and Management in Public Private Partnerships of Urban Markets in Lusaka, Zambia

Erastus Mishengu Mwanaumo, Department of Civil and Environmental Engineering, School of Engineering, University of Zambia, Lusaka, Zambia

Mwewa Mambwe, Department of Construction Management and Quantity Surveying, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa

Micheal Kalumbu Nsefu, Zambia Weights and Measures Agency, Lusaka, Zambia

Muntanga Mfula Lindunda, University of Lusaka, Lusaka, Zambia

ID 355      Impact of Stakeholder Engagement on Performance of Construction Projects in Lusaka District

Micheal Kalumbu Nsefu, Zambia Weights and Measures Agency, Lusaka, Zambia

Mwewa Mambwe, Department of Construction Management and Quantity Surveying, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa

Erastus Mishengu Mwanaumo, Department of Civil and Environmental Engineering, School of Engineering, University of Zambia, Lusaka, Zambia

Nicholas Sakala, University of Lusaka, Lusaka, Zambia

ID 356      Disposal of Used Fumigant Containers in Zambia            

Ziwa Tisah, Department of Civil and Environmental Engineering, School of Engineering, University of Zambia, Great East Road, Lusaka, Zambia

Erastus Mishengu Mwanaumo, Department of Civil and Environmental Engineering, School of Engineering, University of Zambia, Great East Road, Lusaka, Zambia

James Nyirenda, Department of Chemistry, School of Natural Sciences, University of Zambia, Lusaka, Zambia

Bupe Getrude Mwanza,Graduate School of Business, University of Zambia, Great East Road, Lusaka, Zambia

ID 357      A Stochastic Programming Model for Production Planning and Sequencing of multi-grade petrochemicals

Ahmed M. Ghaithan, King Fahd University of Petroleum & Minerals, Construction Engineering and Management Department, Dhahran 31261, Saudi Arabia

ID 358      Minimizing Shopping Mall Business Functions’ Costs for Profit Maximization using Mathematical Programing Model

1, 2 Michael C. Agarana

1 Department of Mathematics, Covenant University, Ota, Nigeria

2 Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa

Lawrence C. Obi, Department of Mathematics, Covenant University, Ota, Nigeria

Chioma O. Agubo, Department of Political Science and International Relations, Covenant University, Ota, Nigeria

Tolulope O. Oladimeji, Department of Computer Science and Information System, Covenant University, Ota, Nigeria

ID 359      Mathematical Programming Modeling and Analysis of Covenant University Supermarkets System for Profit Optimization

Michael C. Agarana, Department of Mathematics, Covenant University, Ota, Nigeria and Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa

Ezinne C. Erondu, Department of Industrial and applied mathematics, Université Grenoble Alpes

Lawrence C. Obi, Department of Mathematics, Covenant University, Ota, Nigeria

Onajiyoma C. Agubo, Department of Political Science and International Relations, Covenant University, Ota, Nigeria

Tolulope O. Oladimeji, Department of Computer Science and Information System, Covenant University, Ota, Nigeria

ID 360      Designing Innovative Stove for Traveler: A Green Product Approach

Zakka Ugih Rizqi, Adinda Khairunisa, Dwi Anggarini, and Ali Parkhan, Department of Industrial Engineering, Universitas Islam Indonesia, Yogyakarta, Indonesia

ID 361      On Suitable Solid Waste Characterization Method for Nigerian University Campuses

Collins O. Ugwu, Department of Mechanical Engineering, University of Nigeria, Nsukka

Paul A. Ozor, Department of Mechanical Engineering, University of Nigeria, Nsukka and Department of Quality and Operations Management University of Johannesburg, South Africa

ID 362      A Cross Sectional Pilot Study on Quality Management System in the Small and Medium Enterprise (SME) In South Africa

A.Y Magodi, I. A. Daniyan and K. Mpofu, Department of Industrial Engineering, Tshwane University of Technology, South Africa

ID 365      FEA of a Lab-Scale IC Engine Connecting Rod

Daramy Vandi Von Kallon, Department of Mechanical Engineering Technology, University of Johannesburg, Johannesburg, South Africa

Bai Kamara, Department of Mechanical Engineering Technology, University of Johannesburg, Johannesburg, South Africa

ID           366        Modelling and Simulating Stress Distribution on a Centrifugal Pump Shaft during Backpressure       

Peter     Baonhe Sob        Vaal University of Technology               Vanderbijlpark    Gauteng               South Africa

ID 367      User Identity Preservation and Data Protection in the Internet of Things

Tambudzai Perpetua Chimeura, National Social Security Authority of Zimbabwe, Zimbabwe

Mohammed Kaosar, Murdoch University, Australia

ID 368      Modelling the Design of a Centrifugal Pump Shaft that can Withstand Fatigue Failure Rate, Stress and Strain during Backpressure

P. B. Sob, Departmentof Mechanical Engineering, Faculty of Engineering and Technology, Vaal University of Technology, Vanderbijlpark 1900, Private Bag X021, South Africa

ID 369      Human Factors Concern in Multicultural Classroom Dynamics

Aljohara Fahad Al-Saud, KSU, Saudi Arabia

ID 370      Deriving Value From Waste: Cupola Furnace Slag As A Solid Lubricant In Drilling Processes

Loice Gudukeya, and Charles Mbohwa, Faculty of Engineering and the Built Environment, University of Zimbabwe, Harare, Zimbabwe and Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa

Roy Mushonga, and Ignatio Madanhire, Faculty of Engineering and the Built Environment, University of Zimbabwe, Harare, Zimbabwe

ID 371      Social Sciences, Services and Industrialisation in Zimbabwe:  Shaping the Debate and Practice

Innocent Chirisa

Dean of the Faculty of Social and Behavioural Sciences, Department of Demography, Settlement and Development, Department of Architecture and Real Estate, University of Zimbabwe, Harare, Zimbabwe

Patience Mazanhi, Department of Demography, Settlement and Development, Department of Architecture and Real Estate, University of Zimbabwe, Harare, Zimbabwe

ID 372      Investigating the Role of Industrial Engineering in Process Improvement in the Banking Industry: A Case Study of Bank Y

Babedi Kufigwa 1, Norman Gwangwava2, and 3 Bathusi Makopo

1,2 Department of Mechanical, Energy and Industrial Engineering, Botswana International University of Science and Technology, Palapye, Botswana

3 Business Process Analyst, First National Bank of Botswana, First Place,(CBD), Gaborone, Botswana

ID 373      Impact of procurement practices on organizational performance on Small to Medium Enterprises: Case Study

Ignatio Madanhire, Kumbi Mugwindiri and Nyasha Mudefi, Department of Mechanical Engineering, University of Zimbabwe, P O Box MP167, Mount Pleasant, Zimbabwe

ID 374      Implementation of Predictive Maintenance in a Thermal Power Plant: Case of Thermal Power Plant

Ignatio Madanhire, Kumbi Mugwindiri and Zorodzai Tota, University of Zimbabwe, Department of Mechanical Engineering, P.O Box MP167, Mt Pleasant, Harare, Zimbabwe

ID 382      The Design Of Spray Nozzle For Washing Aggregates In Mining Industry

T.J Muhanelwa, P. B. Sob and A. A. Alugongo, Department of Mechanical Engineering, Faculty of Engineering and Technology, Vaal University of Technology, Vanderbijlpark 1900, Private Bag X021, South Africa

T. B. Tengen, Department of Industrial Engineering and Operations Management, Faculty of Engineering and Technology, Vaal University of Technology, Vanderbijlpark 1900, Private Bag X021, South Africa,

ID 383      Design of a real time performance monitoring and evaluation system of students during lectures

Gamuchirai Mutubuki, Department of Industrial and Manufacturing Engineering, National University of Science and Technology, Bulawayo, Zimbabwe

ID 384      Opportunities for Energy Savings Based on Behavioural Patterns of Residents in Freetown Sierra Leone

B. Kamara, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, South Africa

S. Kamara, Department of Mechanical Engineering, Fourah Bay College, University of Sierra Leone, Sierra Leone

J.A.S. Redwood-Sawyerr, Department of Electrical Engineering, Fourah Bay College, University of Sierra Leone, Sierra Leone

D.V.V Kallon, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, South Africa

ID 385      Potential, Future Prospects and Challenges associated with the Implementation of Photovoltaic Based Solar Energy Systems in Zimbabwe

Takawira Cuthbert Njenda, Munyaradzi Munochiveyi, Todd Marufu and Lovemore Magombo, Electrical Engineering Department, University of Zimbabwe, Harare, Zimbabwe

ID 386      The Effect of Emotional Intelligence Toward Decision-Making at Family Planning Officer

Ida Nurnida, Mahendra Fakhri, Benny Kurnia, Alex Winarno, and Rahmi Aulia, School of Communication and Business, Telkom University, Bandung, West Java, Indonesia

ID 387      Energy productions using combined cycle gas and vapor at Maputo Thermal Power Plant

Miguel Meque Uamusse, and Alberto Júlio Tsamba, Faculdade de Engenaria, Universidade Eduardo Mondlane, P.O.Box 257, Av de Mocambique, km 1.5, Maputo, Mozambique

ID 388      Fourth Industrial Technology (4IR) for Safe Mining: “Collision Avoidance Technology”

O.J Kaelo; Dr D Madyira and W.R Nyemba,

Department of Mechanical Engineering Science, Faculty of Engineering and the Built Environment, University of Johannesburg, Auckland Park 2006, Johannesburg, South Africa

Department of Mechanical Engineering, University of Zimbabwe, P O Box MP 167, Mount Pleasant, Harare, Zimbabwe

ID 389      Optimising the Velocity and Discharge Produced by a Spray Nozzle for Efficient Washing of Aggregates in a Mining Industry

p. B. Sob, Department of Mechanical Engineering, Faculty of Engineering and Technology, Vaal University of Technology, Vanderbijlpark 1900, Private Bag X021, South Africa

ID 390      Application of Machine Learning techniques to study readmission of patients with cardio vascular diseases

Venkat Lellapalli, Mississippi State University, USA

ID 391      The Differences in Spatial Memory between 2D and 3D Maze Environments

Siddhant Karmali, Stanford Online High School, Redwood City, CA 94063, USA

ID 392      Design an Innovative Poker AKQJ Game and Study Players’ Psyches

Siddhant Karmali, Stanford University OHS, Irvine, CA, USA

ID 393      Developing a Lean Value Chain for Botswana’s Grain Milling Industry – A Case Study Of a Wheat Milling Company

Leaname Thaolang, Trainee Miller – Operations Department, Bolux Group (Pty) Ltd, Ramotswa Station, Botswana

Norman Gwangwava, Mechanical and Industrial Engineering Department, Botswana International University of Science and Technology, Palapye, Botswana

ID 394      Security and Privacy Preserving in Precision Agriculture

Munyaradzi Magomelo, Bindura University of Science Education, Zimbabwe

Mohammed Kaosar, Murdoch University, Australia

ID 395      Improving the efficiency and stability of centrifugal pump filtration system using membrane system

T.S. Lekalakala 1, P. B. Sob 2, A. A. Alugongo 3 and T. B. Tengen 4

1,2,3 Departmentof Mechanical Engineering, Faculty of Engineering and Technology, Vaal University of Technology, Vanderbijlpark 1900, Private Bag X021, South Africa

4 Department of Industrial Engineering and Operations Management, Faculty of Engineering and Technology, Vaal University of Technology, Vanderbijlpark 1900, Private Bag X021, South Africa

ID 396      Impact of Accounting Methods on Supply Chain Contracts: Analysis Based on E-tailer Supply Chain Costs

Sahani Rathnasiri, and Sardar Islam, Sustainable Industries and Livable Cities, Victoria University, Melbourne, Australia

Pritee Ray, Department of Operations Management, Indian Institute of Management Ranchi, Jharkhand, India

ID 397      Recent advances in sustainable machining technologies

Ali Bastas, Mechanical Engineering Program, Middle East Technical University – Northern Cyprus Campus, Guzelyurt via Mersin 10, Turkey

ID 399      The Influence of Democratic Leadership Style on Clan Organizational Culture in Family Companies

Mahendra Fakhri, Ida Nurnida, Alex Winarno, Anita Silvianita, Benny Kurnia, Syarifa Hanum

School of Communication and Business Telkom University    Bandung  West Java               Indonesia

ID 400      A Case Study of Service Firm to Optimize the Cycle Time – Advanced Lean Techniques to Design Plant Layout

Tarani Kanth Kamma, Assistant Professor, Department of Mechanical Engineering Vignan Institute of information Technology, Duvvada, Visakhapatnam, India

Dr. N V S Shankar, Associate Professor, Department of Mechanical Engineering Vignan Institute of information Technology, Duvvada, Visakhapatnam, India

Dr. Sarojini Jajimogala, Associate Professor, Department of Mechanical Engineering GITAM, Rushikonda, Visakhapatnam, India

ID 401      Bioenergy Efficiency Evaluation for Sustainable Optimization in Sub-Saharan Africa

Katundu Imasiku, Africa Centre of Excellence in Energy for Sustainable Development, College of Sciences and Technology, University of Rwanda,

Nyarugenge, 1109, Kigali, Rwanda

Valerie M. Thomas, School of Industrial and Systems Engineering, Georgia Institute of Technology, 755 Ferst Drive NW, Atlanta, GA 30332-0205, USA and School of Public Policy, Georgia Institute of Technology, 685 Cherry Street, Atlanta, GA 30332-0345, USA

ID 402      Towards Decentralised Water Access, A Primer Solar PWS Design Solution to Aid The COVID-19 Fight.

Hilton Chingosho, Roy N Mushonga, Tauyanashe Chikuku, Wilson R Nyemba, Loice Gudukeya

Department of Mechanical Engineering

University of Zimbabwe

Harare, P.O Box MT 167 Mount Pleasant, Zimbabwe

ID 409      Analysis of Elastic-Plastic Buckling of a Thin Rectangular Plate, Considering Nonlinear Strain Terms

Roy N Mushonga, Faculty of Engineering, Isfahan University of Technology, Iran and Faculty of Engineering, University of Zimbabwe, Harare, Zimbabwe

Mehdi Salmani-Tehrani, Faculty of Engineering, Isfahan University of Technology, Iran

Loice Gudukeya, Faculty of Engineering, University of Zimbabwe, Harare, Zimbabwe and Faculty of Engineering and the Built Environment,

University of Johannesburg, Johannesburg, South Africa

Hilton Chingosho, and Ignatio Madanhire, Faculty of Engineering, University of Zimbabwe, Harare, Zimbabwe

ID 410      Green manufacturing in the food industry and its impact on the environment

Gamuchirai Mutubuki, Department of Industrial and Manufacturing Engineering, National University of Science and Technology, Bulawayo, Zimbabwe

Gibson P Chirinda, Department of Industrial and Manufacturing Engineering, National University of Science and Technology, Bulawayo, Zimbabwe

ID 411      Design of a system that can harvest essential oils from plants for pharmaceutical uses

Kudakwashe Kusena and Tawanda Mushiri, Industrial and Mechatronics Engineering Department, Faculty of Engineering and the Built Environment,

University of Zimbabwe, 630 Churchill Avenue, Harare, Zimbabwe

Lameck S. Chagonda, Pharmacy Department, Faculty of Medicine and Health Sciences, University of Zimbabwe, Harare, Zimbabwe

ID 412      Developing a Maturity Model and an Implementation Plan for Industry 4.0 Integration

Samantha Melnik, Michael Magnotti, Cameron Butts, Carol Putman, and Faisal Aqlan, Pennsylvania State University, The Behrend College, Erie, PA 16563, USA

ID 413      Potential pre-treatment and processing routes for recovery of gold from complex (refractory) gold ores. A review

Nancy.R. Mabwe, Department of Mining, Chemical and Metallurgical Engineering, University of Zimbabwe, Mt Pleasant, Harare, Zimbabwe

ID 415      Predicting Congenital Heart Diseases Using Machine Learning

John Tinashe Meda and Tawanda Mushiri, Department of Industrial and Mechatronics Engineering, Faculty of Engineering and the Built Environment, University of Zimbabwe, Harare, Mt Pleasant, 630 Churchill Avenue, Zimbabwe

ID 416      Design of a first aid robotic end effector for passenger car occupants          

Caiphas Svosve and Tawanda Mushiri, Department of Industrial and Mechatronics Engineering, Faculty of Engineering and the Built Environment,

University of Zimbabwe, Harare, Mt Pleasant, 630 Churchill Avenue, Zimbabwe

ID 418      A Modified Firefly Algorithm for Global Optimization of Collaborative Supply Chain Networks under Stochastic Demand

Abdulhadi Altherwi, Department of Industrial Engineering, Jazan University, Jazan, Saudi Arabia and Department of Industrial & Systems Engineering, Oakland University, Rochester, MI 48309, USA

Daw Alwerfalli, A Leon Linton Department of Mechanical, Robotics and Industrial Engineering, Lawrence Technological University, Southfield, MI 48075, USA

ID 419      Aluminium and Mercury Preservatives Accumulated In the Brain from Vaccines

Kelsey Catania and Carrieann Towne, Department of Biomedical Engineering, Lawrence Technological University, Southfield, MI 48075, USA

George Pappas, Ph.D. and Michael McGrath, OD, Electrical and Computer Engineering Department, Lawrence Technological University, Southfield, MI 48075, USA

ID 420      The Assessment and Characterization of Critical Thinking Skills of Upper Division Technology Students Using the Critical Thinking Assessment Test (CAT)

Matthew Harvey, Department of Agricultural and Biosystems Engineering, Iowa State University, Ames, IA 50011, USA

ID 422      Broadcasting Beyond: Making the Next Generation in Communication

Aaron Lindlbauer, Department of Electrical, Computer Engineering and Embedded Software Engineering, Lawrence Technological University, Southfield, MI 48075, USA

George Pappas, Ph.D. & David Newman, Department of Electrical, Computer Engineering and Embedded Software Engineering , Lawrence Technological University, Southfield, MI 48075, USA

ID 423      The Relationship between Risk Management and Safety, Health, Environment and Quality Policy Implementation Among Zambian Contractors

Bupe Mwanza, University of Zambia and University of Johannesburg, Gauteng, South Africa

ID 425      A Regression Model Upon Treatment of AMD Using Pervious Concrete.

A. L. Mafanya, Department of Industrial and Mechanical Engineering, University of Johannesburg, South Africa

B.D.V.V. Kallon, Department of Industrial Engineering, University of Johannesburg, South Africa

ID 426      Towards Energy Efficient Machining of Titanium Alloys – Ti6Al4V: Chip Morphology Impact on Specific Energy Use

Nicholas Tayisepi, Department of Industrial and Manufacturing Engineering, National University of Science and Technology, Gwanda Road/Cecil Avenue, P. O. Box AC 939, Ascot, Bulawayo, ZIMBABWE

Rudolph F Laubscher, Mechanical Engineering Sciences Department, University of Johannesburg, Kingsway Campus, P.O Box 524, Auckland Park, 2006, Johannesburg, RSA

Gert A Oosthuizen, Department of Industrial Engineering, University of Stellenbosch, Victoria Street, Matieland, Stellenbosch 7602, RSA

ID 427      Determination of Agricultural Insurance Premium Prices Based on Rainfall Index with Formula Cash-or-Nothing Put Option

Agung Prabowo, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Jenderal Soedirman, Indonesia

Zahrahtul Amani Zakaria, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin (UNISZA), Kampus Tembila, Malaysia

Mustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin (UNISZA), Gong Badak Campus, Terengganu, Malaysia

Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia

Slamet Riyadi, Department of English Education, Faculty of Cultural Sciences, Universitas Jenderal Soedirman, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 428      Sentiment Analysis of User Preferences on Learning Management System (LMS) Platform Data

Boldson Herdianto Situmorang, and Andi Chairunnas, Department of Computer Science, Faculty of Mathematics and Natural Sciences, Universitas Pakuan, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 429      Improving the Management Quality of Research and Community Service Institute using SIMPEMAS

Deden Ardiansyah, Departement of Computer Technologies, Vocational School, Universitas Pakuan, Indonesia

Prihastuti Harsani, Department of Computer Science, Faculty of Mathematics and Natural Sciences, Universitas Pakuan, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 430      Student Attendance Monitoring and Evaluation System Using Radio Frequency Identification

Dian Kartika Utami, Department of Information System, Pakuan University, Indonesia

Akbar Sugih Miftahul Huda, Department of Computer Technologies, Pakuan University, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 431      Customer Cluster Model to Determine Business Opportunity by Hierarchycal Method

Eneng Tita Tosida, Cani Nur Rahmawati, and Mulyati,Department of Computer Science, Faculty of Mathematics and Natural Sciences, Universitas Pakuan, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 432      BPJS Health Insurance Program: SME’s Perspective

Fredi Andria, and Ulfa Sri Rahayu, Department of Management, Faculty of Economics Pakuan University, Bogor Indonesia

R. Muhammad Mihradi, Department of Law, Faculty of Law Pakuan University, Bogor Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 433      Optimization JKN Mobile for Informal Sector of BPJS Health Insurance Membership Growth

Fredi Andria, Meli Deranti, and Lisa Mila Sari, Department of Management, Faculty of Economics Pakuan University, Bogor Indonesia

Department of Law, Faculty of Law Pakuan University, Bogor Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia

ID 434      Reserve of Life Insurance Prospective Dwiguna Joint Life and Last Survivor With Gompertz Law

Hasriati, Tumpal Parulian Nababan, and Ihda Hasbiyati, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Riau, Indonesia

Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia.

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 435      Mitigation Efforts and Natural Disaster Insurance Schemes in Indonesia

Kalfin, Doctor Program of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia

Sukono, Sudradjat Supian, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia

Mustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Kuala Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 436      E-Commerce Adoption Level in SMEs since Pandemic Covid-19 Case in Bogor, Indonesia

Kiki Oktora, Syafani Putri Lolita, Department of Management, Faculty of Economics Universitas Pakuan, Bogor Indonesia

Verni Yuliaty Ismail, and Muhammad Refki Novesar, Department of Management, Faculty of Economics Universitas Yarsi, Jakarta Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia

ID 437      Usability testing on the Drug e-Dictionary using the Think-Aloud Retrospective Method and USE Questionnaire

Halimah Tus Sadiah and Ema Kurnia, Information System Department, Universitas Pakuan, Bogor, 16143, West Java, Indonesia

Eneng Tita Tosida, Computer Science Department, Universitas Pakuan, Jl. Pakuan, PO Box 452, Bogor, 16143, West Java, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 438        Usability testing on the Drug e-Dictionary using the Think-Aloud Retrospective Method and USE Questionnaire  

Halimah Tus Sadiah, University of Pakuan, Bogor, Jawab Barat, Indonesia

ID 439      Determination of Earthquake Insurance Premiums Using the Bayesian Method

Sukono, Agus Supriatna, Rizky Akbar Hidayat, and Riaman, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia

Kalfin, Doctor Program of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia

Faiza Renaldi, Department of Informatics Engineering, Faculty of Science and Informatics, Universitas Jenderal Achmad Yani, Cimahi, West Java, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 440      Inventory Simulation Modelling for Local Shoes Manufacturer

Yudhia Mulya, Department of Economics and Business, Universitas Pakuan, Indonesia

Sufiatul Maryana, Vocational School, Universitas Pakuan, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 441      Identification of Factors Affecting the Mathematics Learning Difficulties of Students in Bandung Using a Linear Regression Model

Rahmi Wiganda Elastika, Master Study Program of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia

Sukono, Stanley Pandu Dewanto, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, INDONESIA

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 442      Estimated Value at Risk in Stock Investments in An Insurance Company using the Extreme Value Theory Method

Riaman, Sudradjat Supian, and Sukono, Department of MathematicsFaculty of Mathematics and Natural Sciences, Padjadjaran University, Jatinangor 40363, Indonesia

Mustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Kuala Terengganu, Malaysia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 443      Adomian Decomposition Method and the New Integral Transform

Ira Sumiati, Master Program of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia

Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 444      Analysis of the Factors Affecting the Money Supply in Indonesia Using the Multiple Linear Regression Model

Trisha Magdalena Adelheid Januaviani, Master Program of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia

Sukono, Eman Lesmana, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia.

Kalfin, Doctoral Program of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia.

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 445      On Line One Stop Government and Open Government from Citizens Perspective (Case: Bogor City and District,  West Java, Indonesia)

Eneng Tita Tosida, and Fajar Delli Wihartiko, Department of Computer Science, Faculty of Mathematics and Natural Sciences, Universitas Pakuan, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 446      Sustainable Machining of Ti-Alloys: Linking Cutting Parameters, Chip Morphology And Specific Cutting Energy During the Turning of Ti6Al4V

Nicholas Tayisepi, Department of Industrial and Manufacturing Engineering, National University of Science and Technology, Gwanda Road/Cecil Avenue, P. O. Box AC 939, Ascot, Bulawayo, ZIMBABWE

Rudolph F Laubscher, Mechanical Engineering Sciences Department, University of Johannesburg, Kingsway Campus, P.O Box 524, Auckland Park, 2006, Johannesburg, RSA

Gert A Oosthuizen, Department of Industrial Engineering, University of Stellenbosch, Victoria Street, Private Bag X1, Matieland, Stellenbosch, RSA

ID 447      Covid-19 Time Series Data Quality Analysis (Case study at COVID-19 Data Repository by the Center for Systems Science and Engineering (CSSE) at Johns Hopkins University)

Yuyun Hidayat, Dhika Surya Pangestu, and Titi Purwandari, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia

Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia.

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 448      The Graphically Analysis of the Power of Hypothesis Parameters on Discrete (Binomial) and Continuous (Gamma) Distributions

B. Pratikno, A. Kurniasih, Mashuri and N. Azizah, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Jenderal Soedirman, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 449      The Implementation of Tangent Control Chart for Identification of Countries that have Positive Covid-19 Cases Data Trend Similar to Indonesia

Yuyun Hidayat, Farhan Utama, and Titi Purwandari, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia

Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia.

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 450      The Caracteristics of Alpha Cut on Fuzzy Graphs and Its Application in Scheduling System

Triyani, S. N.  Nurshiami and N. Larasati, Department of Mathematics, Faculty of Mathematics and Natural Science, Jenderal Soedirman University, Central Java, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 451      Application of Statistical Process Monitoring and Control (SPC) for Quality Control of Front Axle Component in Truck Vehicle

Yuyun Hidayat, Neneng Sunengsih, Lusyana Leonita, and Titi Purwandari, Department of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Pdjadjaran, Indonesia

Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia.

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 452      Identity Based Cryptography: A Technical Review

Mohammed A. Khasawneh, Concordia Institute for Information Systems Engineering, Concordia University, Canada, Montreal

ID 453      Simulation of an extraction system using an Internet of Things (IoT) device for automatic control and alarm management for a Hospital Airborne Infectious Hospital Isolation Rooms (AIIR)

L.A. Roy, F.K Tekweme, Department of Mechanical Engineering, University of Johannesburg, Johannesburg, South Africa

ID 454      Increasing Customer Satisfaction Index Through Integrated Restaurant Operational Systems

Faiza Renaldi, Devi Fajar Wati, and Agya Java Maulidin, Department of Informatics, Universitas Jenderal Achmad Yani, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 455      Cloud-Based Online Ordering Platform to Reduce the Number of Queues at Local Restaurants

Faiza Renaldi, Christine Chlyw Nova, and Agya Java Maulidin, Department of Informatics, Universitas Jenderal Achmad Yani, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 456      Increasing Online Sales through Integration of Dropship System and Social Media Platform

Faiza Renaldi, Rival Muhamad Saepuloh, and Agya Java Maulidin, Department of Informatics, Universitas Jenderal Achmad Yani, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 457      The Use of Search Engine Optimization on Local T-Shirt eCommerce Site: A Mini Longitudinal Study

Faiza Renaldi, Angga Fantiya Hermawan, and Agya Java Maulidin, Department of Informatics, Universitas Jenderal Achmad Yani, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 458      Integrating Travel Booking Management System Services Using Rest-API

Faiza Renaldi, Hary Suryanto, Agya Java Maulidin, and Irma Santikarama, Department of Informatics, Universitas Jenderal Achmad Yani, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 459      Internet Presence Monitoring: Application of Heuristic Genetic Algorithm to Increase Efficiency in Work Allocation

Tricy B. Aquino, Juan Florencio C. Ferrer and Rex Aurelius C. Robielos, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 460      Internal Audit Resource Allocation Model Using Linear Programming

Frederick M. Baldo and Rex Aurelius C. Robielos, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 461      Buying Condominium Properties Made Easy using Analytic Hierarchy Process (AHP) Approach through Expert Choice

Juan Enrique C. Banal and Rex Aurelius C. Robielos, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 462      Revenue Maximization and Manpower Allocation of Internet Service Provider using Linear Programming

Eloizza T. Caldamo, Kristel Joy A. Bergantiños and Rex Aurelius C. Robielos, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 463      Utilization of Analytic Hierarchy Process (AHP) with Linear Regression for Determining Category to Maximize Potential Revenue through View Count

Kevin Joseph de Guzman and Rex Aurelius C. Robielos, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 464      Optimization of the Allocation of Production Specialist Working in a Semiconductor Company under the Compressed Skeletal Workforce Schedule Using Linear Programming

Katrina Laurain Gaspar and Rex Aurelius C. Robielos, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 465      Life Insurance Policy/Products Selection Using Analytical Hierarchy Process (AHP)

Chris Ren S. Pimentel, John Louis I. Encinas and Rex Aurelius C. Robielos, School of Industrial Engineering and Engineering Management

Mapua University, Intramuros, Manila, Philippines

ID 466      Sales Maximization through Service Tier Introduction Utilizing LP Model and AHP-based After Sales Pursuit Strategy Selection

Pebbles Quimpo, Patrick Santos, Marien Tagaban and Rex Aurelius C. Robielos, School of Industrial Engineering and Engineering Management

Mapua University, Intramuros, Manila, Philippines

ID 467      Prediction of Credit Card Status Changes using Markov Analysis

Reynald M. Rodriguez and Rex Aurelius C. Robielos, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 468      Determining Priority Export Sectors for the Philippines using Analytic Hierarchy Process (AHP)

Ronnel B. Ruanes and Rex Aurelius C. Robielos, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 469      The Moderating Effect Of Firm Characteristics On The Relationship Between Financial Sustainability And Access To Finance Among SMEs In Malaysia           

Sonia Lohana and Umi Kartini Rashid, Universiti Tun Hussein Onn Malaysia, Parit Raja, 86400, Malaysia

ID 483      Naïve Bayes Classifier for Predicting Success Factors of Engineering Education: Belgian Example

Saeka Rahman, Department of Computer Science and Engineering, International Standard University, Dhaka, Bangladesh

ID 485      Analysis of the Performance of Gubeng Train Station Facilities According to Public Perceptions

Dwi Sulastri, Sri Wiwoho Mudjanarko, Atik Wahyuni and Rizal Bahaswan, Department of Civil Engineeering, Narotama University, Surabaya, Indonesia

Joewono Prasetijo, Department of Jabatan Teknologi Kejuruteraan Pengangkutan, Universiti Tun Hussein Onn Malaysia, Pagoh, 84600, MALAYSIA

ID 486      Pedestrian Performance Model Analysis in the city of Surabaya

Sri Wiwoho Mudjanarko, Florianus Rooslan Edy Santosa and Rizal Bahaswan, Department of Civil Engineeering, Narotama University, Surabaya, 60117, INDONESIA

Andrias Eko Adi Sutrisno, Department of Civil Engineeering, Narotama University, Surabaya, 60117, INDONESIA

Mega Maharani Lestari, Department of Product Design, Institut Teknologi Sepuluh Nopember, Surabaya, 60117, INDONESIA

Firdaus Pratama Wiwoho, Department of Civil Engineeering, Institut Teknologi Sepuluh Nopember, Surabaya, 60117, INDONESIA

ID 487        An Evaluation of Cyber Crime and Cyber Security Bill of Zimbabwe
Farai Francisco Madyira, Ramson Munyaradzi Nyamukondiwa and Cuthbert Tendaupenyu, University of Zimbabwe School of Technology, University of Zimbabwe, Harare, Zimbabwe

ID 488      Effectiveness of Card Banking Security in the Ethiopian Financial Sector: a Gap Analysis

Daniel Gebrehawariat, IT Infrastructure and System Department, Bunna International Bank, Addis Ababa, Ethiopia

Lemma Lessa, School of Information Science, Addis Ababa University, Addis Ababa, Ethiopia 

ID 489      Design and Development of Sound Absorbing Panels using Biomass Materials

Peter Gabriel C. Buot, Rayson M. Cueto, Andrei A. Esguerra, Ron Irwin C. Pascua and Engr. Sherwin S. Magon, School of Mechanical and Manufacturing Engineering, Mapua University, Intramuros, Manila, Philippines

Ma. Janice J. Gumasing, School of Industrial and Engineering Managemenrt, Mapua University, Intramuros, Manila, Philippines

ID 490      Performance Comparison and Indoor Air Quality Exposure Assessment of a Fan-Powered Cook Stove

Dustin Mariel G. Cabangal, Daniel Joshua N. Festin, Neil Darren P. Marasigan and Mark Christian E. Manuel, PhD.

School of Mechanical and Manufacturing Engineering, Mapua University, Intramuros, Manila, Philippines

Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 491      Installation of Pico-Hydro System to Augment the Electricity Requirement of a Rural Community in Victoria Oriental Mindoro, Philippines

Jupete N. Diswe, Kent Andrew C. Dudas, Arvin Jan A. Padilla, Reimbert Randall A. Roca and Engr. Igmedio F. Isla, Jr., School of Mechanical and Manufacturing Engineering, Mapua University, Intramuros, Manila, Philippines

Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 492      Development of Portable Chiller for Carabao Milk with Independent Cooling System using Thermoelectric Effect

Christian Henry D. Escolar, Adrian Michael N. Lee, Ian M. Matibag and Mark Christian E. Manuel, PhD., School of Mechanical and Manufacturing Engineering, Mapua University, Intramuros, Manila, Philippines

Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 493      Ergonomic Design of Tunnel Ventilation System for Underground MRT Station using CFD Simulation

Michael N. Lagundino and Mark Cristian E. Manuel, School of Mechanical and Manufacturing Engineering, Mapua University, Intramuros, Manila, Philippines

Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 494      Development of Molding Machine for Petal-Shape Gum Paste

Adam F. Rombaoa and Edward B.O. Ang, School of Mechanical and Manufacturing Engineering, Mapua University, Intramuros, Manila, Philippines

Ma. Janice J. Gumasing, School of Industrial Engineering and Engineering Management, Mapua University, Intramuros, Manila, Philippines

ID 495      Battery Size Optimization Strategies for the Solar Powered Led Lights         

Nkateko   Mabunda University of Johannesburg, Germiston, Gauteng, South Africa

ID 496      Embedded Data Acquisition Systems for the logging and monitoring of PV parameters             

Nkateko Mabunda, University of Johannesburg, Germiston, Gauteng, South Africa

ID 497      Isolation and Identification of Potential Bacteria Specie in Petroleum Refinery Oily Sludge (PROS)

Vicky Kumar Lohana, Faculty of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Seri Iskandar, Perak, Malaysia

Shamsul Rahman B M Kutty, Faculty of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Seri Iskandar, Perak, Malaysia

Lavania A/P Baloo, Faculty of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Seri Iskandar, Perak, Malaysia

ID 499      The Behavior Study of Vehicle Users on The Availability of Public Parking Spaces

Sri Wiwoho Mudjanarko, Department of Civil Engineeering, Narotama University, Surabaya, 60117, INDONESIA

Dadang Supriyatno, Department of Civil Engineeering, Universitas Negeri Surabaya, Surabaya, 60231, INDONESIA

Joewono Prasetijo, Department of Jabatan Teknologi Kejuruteraan Pengangkutan, Universiti Tun Hussein Onn Malaysia

Slamet Winardi, Departement of Computer System, Narotama University, Surabaya, 60117, INDONESIA

Rizal Bahaswan, Department of Civil Engineeering, Narotama University, Surabaya, 60117, INDONESIA

Firdaus Pratama Wiwoho, Department of Civil Engineeering, Institut Teknologi Sepuluh Nopember, Surabaya, 60117, INDONESIA

ID 500      Human Factors Influence in Information Systems Security: Towards a Conceptual Framework 

Girma Abebe, Accounting and Finance Department, Rift Valley University, Ethiopia, Addis Ababa, Ethiopia

Lemma Lessa, School of Information Science, Addis Ababa University, Addis Ababa, Ethiopia

ID 501      Modelling And Mapping University Business Process: Level 1

Bachtiar H. Simamora, Wibowo Kosasih, Natalia, Rudi and Lily Leonita, Management Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480

ID 502      Comparative Analysis of Critical Success Factors Affecting ERP Implementation in Private and Public Organizations in Ethiopia: A Pareto Approach

Sisay Msganaw, Information Science Department, Assosa University, Ethiopia, Assosa, Ethiopia

Lemma Lessa, School of Information Science, Addis Ababa University, Addis Ababa, Ethiopia

ID 513      Microclimate requirements for theatre rooms: case study for tertiary hospitals in Zimbabwe

a Winnie Mutenhabundo and b Tawanda Mushiri

a,b Department of Mechanical Engineering, University of Zimbabwe, Mt Pleasant, Harare, 263, Zimbabwe

b Senior Research Associate, Quality and Operations Department,  University of Johannesburg, Bunting Road Campus, Auckland Park 2006, P.O Box APB524, Johannesburg, South Africa

ID 514      Financing Model for Small-Medium Scale Contractors in Indonesian

Rizal Bahaswan, and Sri Wiwoho Mudjanarko, Department of Civil Engineering, Narotama University, Surabaya, 60117, Indonesia

Zulaicha Parastuty, Department of Sociology, Alpen-Adria University of Klagenfurt, Austria

ID 515      The Potential of IoT on the Education Sector in Zimbabwe: The Case of University of Zimbabwe

Farai Francisco Madyira, University of Zimbabwe School of Technology, University of Zimbabwe, Harare, Zimbabwe

Barend W Botha, University of Johannesburg, Johannesburg, South Africa

ID 516      Tailoring an Information Technology Governance Framework for National Bank of Ethiopia

Temesgen Asnake, Information Systems Management Directorate, National Bank of Ethiopia, Addis Ababa, Ethiopia

Lemma Lessa, School of Information Science, Addis Ababa University, Addis Ababa, Ethiopia

ID 517      ERP Pre-Implementation Readiness Assessment Framework for Ethiopian Context: A Multi Stakeholders’ Perspective

Rahel Tekleselassie, Customer Service Department, Ethio Telecom, Addis Ababa, Ethiopia

Lemma Lessa, School of Information Science, Addis Ababa University, Addis Ababa, Ethiopia

ID 518      Magnetic Survey for Qualitative Interpretation of Subsurface Andesites Rocks Distribution in Kutasari, Purbalingga Regency, Indonesia

Sehah, Sukmaji Anom Raharjo, Urip Nurwijayanto Prabowo, and Dwi Setiawan Sutanto, Department of Physics, Faculty of Mathematics and Natural Sciences, Universitas Jenderal Soedirman, Purwokerto, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 519      Private Blockchain-Secured Covid-19 Wearables in Smart Homes Utilising Raspberry Pi Web Of Things Gateways

Solomon Hopewell Kembo, Department of Computer Engineering, University of Zimbabwe

Patience Mpofu, Department of Computer Engineering, University of Zimbabwe

Brighton Tafadzwa Mukorera, Cryptosine PBC

ID 520      Dealing with Food Supply Chain Management and Self-Sufficiency with Privacy-Preserving Iot Edge and Fog Computing In Household Aquaponics. 

Patience Mpofu and Solomon Hopewell Kembo, Computer Engineering, University of Zimbabwe

Nevil Chitiyo, Energy Department, Clamore Solar, Zimbabwe 

ID 521      Synthesising Lean Construction and Building Information Modelling to improve the South African Architecture, Construction and Engineering Industries: A literature review.

Temitope Olaniran and Nischolan Pillay, Department of Architecture, Faculty of Engineering and the Built Environment, Durban University of Technology, Durban, 4001, Republic of South Africa

ID 522      Android-Based Information Technology Design for Easy Parking

Sri Wiwoho Mudjanarko, Department of Civil Engineeering, Narotama University, Surabaya, 60117, INDONESIA

Made Kamisutara, Departement of Informatic Engineering, Narotama University, Surabaya, 60117, INDONESIA

Tubagus Purworusmiardi, Departement of Economics and Business, Narotama University, Surabaya, 60117, INDONESIA

Achmad Muchayan, Departement of Information System, Narotama University, Surabaya, 60117, INDONESIA

Slamet Winardi, Departement of Computer System, Narotama University, Surabaya, 60117, INDONESIA

Rizal Bahaswan, Department of Civil Engineeering, Narotama University, Surabaya, 60117, INDONESIA

Firdaus Pratama Wiwoho, Department of Civil Engineeering, Institut Teknologi Sepuluh Nopember, Surabaya, 60117, INDONESIA

ID 523      Improvement of Mathematical Communication Skills and Learning Independence Students Who Get Quantum Teaching Models and Discovery Learning Models

Basuki, Ega Dwi Utami, Mathematics Education Study Program, Institut Pendidikan Indonesia, Garut, West Java, Indonesia

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 531      Identifying factors that contribute to poor performance of junior coal miners in South Africa     

Zanele Mpanza, Department of Mechanical and Industrial Engineering, University of South Africa, Johannesburg, South Africa

ID 533      Geospatial Dashboards for Mapping and Tracking of Novel Coronavirus Pandemic    

Noralfishah Sulaiman, Sheikh Kamran Abid, Shiau Wei Chan, Umber Nazir, Nur Putri Najwa Mahmud, Siti Kursiah Kamalia Abdul Latib, Haridzah Fathini Muhammad Hafidz, Syamimi Afiqah Binti Shahlal, and Siti Hawa Mat Sapuan, KANZU Research: Resilient Built Environment (RBE), Faculty of Technology Management and Business (FPTP), Universiti Tun Hussein Onn Malaysia (UTHM), 86400 Parit Raja Batu Pahat Johor, Malaysia

Terrence Fernando, THINKlab, University of Salford, United Kingdom

ID 536      Need for Resilience Healthcare Facilities Management (RHFM) In Malaysia’s Public Hospitals. A Critical Literature Review

Noralfishah Sulaiman, Sheikh Kamran Abid, Umber Nazir, Nur Putri Najwa Mahmud, Siti Kursiah Kamalia Abdul Latib, Haridzah Fathini Muhammad Hafidz, KANZU Research: Resilient Built Environment (RBE), Department of Real Estate, Faculty of Technology Management & Business, Universiti Tun Hussein Onn Malaysia (UTHM), 86400, Johor, Malaysia

Ahmed Farhan Roslan, Construction Research Institute of Malaysia (CREAM), Malaysia

Norbaya Ab Rahim, Department of Estate Management, Faculty of Architecture, Planning & Surveying, Universiti of Teknologi Mara (UiTM)

ID 537      Predict 2020 USA Presidential Election COVID-19 Correlation

Saloni Patel, Stanford Online High School, Redwood City, CA 94063, USA

Mason Chen, Stanford Online High School, Redwood City, CA 94063, USA

Patrick Giuliano, Abbott Structural Heart, Menlo Park, CA 94025, USA

ID 538      Use of Bio-printing Technology to Produce Vitamin A Micronutrient Supplements That Can Be Used To Combat in Malnutrition in Zimbabwe

Kennedy Barnes, Department of Life Science, Ecoteck Laboratory, Detroit, MI 48202, USA

ID 542     Emotion and Correlations to Time (Applications of EEG)

Arhan Surapaneni, Stanford University Online High School, Redwood City, CA94063, USA

ID 543     Design an Innovative Poker AKQJ Game and Study Players’ Psychological Characters

Mason Chen and Saloni Patel, Stanford OHS, Academy Hall Floor 2 8853 415 Broadway, Redwood City, CA 94063, USA

ID 544      “STEAMS” Methodology of NBA Draft Player Position   

Mason Chen, Stanford OHS, Academy Hall Floor 2 8853 415 Broadway, Redwood City, CA 94063, USA

ID 545     Towards achieving a 3D print Zimbabwean traditional time telling clock

Joyleen Sagandira, Innovation Hub Graduate trainee in Archaeology, University of Zimbabwe, Mt Pleasant, Harare, Zimbabwe

Ancilla Nhamo, Research and Innovation Specialist, Office of the Vice Chancellor, University of Zimbabwe, MT Pleasant, Harare, Zimbabwe

Tawanda Mushiri, Senior Lecturer and Deputy Dean, Researcher on Robotics, AI and Health 4.0, Faculty of Engineering and Built Environment ,University of Zimbabwe, 630 Churchill Avenue ,Mt Pleasant, Harare, Zimbabwe and Industrial and Mechatronics Engineering Department, Faculty of Engineering and the Built Environment, University of Zimbabwe, 630 Churchill Avenue, Harare, Zimbabwe

ID 546      Political polarisation on internet platforms: A case of Zimbabwean news portal chatrooms        

Susan Makore and Sam Takavarasha Jr, Women’s University in Africa, Harare, Zimbabwe

ID 547      Search Space Restriction for UCSP in Genetic Algorithms via a Novel Random-Key Decoder

Ian Smith, Computer Science Department, Cranbrook Kingswood Upper School, Bloomfield Hills, MI 48303, USA

George Pappas, Electrical and Computer Engineering Department, Lawrence Technological University, Southfield, MI 48075, USA

ID 548      Strategic Integrated Transport for growth and development strategy in South Africa, a focus on Rea Vaya BRT              

Mamogege Desiree Sekgale and Nelson Madonsela, Department of Operations Management University of Johannesburg, Doornfontein, RSA

ID 549      Collision Avoidance Technology The use of Fourth Industrial Revolution (4IR) for Safe Mining

O.J Kaelo and D Madyira, Department of Mechanical Engineering Science & Technology, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa

ID 550      Adoption of E-Commerce by Zimbabwean Hotels: An Empirical Study

Nyasha Caroline Moyo, Women’s University in Africa, Harare, Zimbabwe

Sam Takavarasha Jr, Women’s University in Africa, Harare, Zimbabwe

ID 552      Design of an Intelligent Robotic Tool for Intracranial Haemorrhage Detection at Road Traffic Accident Scenes   

Tinotenda Joramu and Tawanda Mushiri, Department of Industrial and Mechatronics Engineering, Faculty of Engineering and the Built Environment,

University of Zimbabwe, Harare, Mt Pleasant, 630 Churchill Avenue, Zimbabwe

ID 553      A Literature Review on the Impact of Municipal Density-Related Strategies on the Feasibility of Real Estate Developments

Zara Marais, Michelle Burger and Benita Zulch, Department of Construction Economics, EBIT Faculty, University of Pretoria, Pretoria, South Africa

ID 554        Undergraduate Engineering Education During Covid-19

Johannes P van der Walt, Namibia University of Science and Technology,  Windhoek, Namibia

ID 555      Majority Voting Ensemble Learning for Intrusion Detection using Recursive Feature Elimination

Kudakwashe Zvarevashe, Prudence Kadebu, Addlight Mukwazvure and Fungai Mukora, Faculty of Computer Engineering, Informatics and Communication, University of Zimbabwe, Harare, MI 48075, Zimbabwe

Tatenda Trust Gotora, Computer Science Department, Midlands State University, Gweru, Zimbabwe

ID 556      An Evaluation of the Importance of E-commerce Adoption to the Growth of SMEs in Zimbabwe

Belinda Gurure and Sam Takavarasha Jr, Women’s University in Africa, Harare, Zimbabwe

ID 557      Anti Radicalism Education; Amplification of Islamic Thoght and Revitalization of the Higher Education in Indonesia

Abd. Hamid Wahid, Akmal Mundiri, Chusnul Muali, and Idil Ghufron, University of Nurul Jadid, Probolinggo, East Java, Indonesia

Rosyadi Badar, IAIN Jember, East Java, Indonesia

ID 558      Creation of Artisanal Cigars through the Design of a Fermentation Chamber

Yocelyn Torres Cepeda, Daniela Balderas Aldape, Alberto Andrés González Hernández, Alejando López Castaldi, Ernesto Cangas, Rolando Marcelo Ochoa Aguilar and José Andrés González Martínez

Industrial and Systems Engineering Department, Instituto Tecnológico de Estudios Superiores de Monterrey, Monterrey, México

Marian Lozano Rubio, Innovation and Development Engineering Department, Instituto Tecnológico de Estudios Superiores de Monterrey, Monterrey, México

ID 559      Real Time Gesture-Controlled Mobile Robot using a Myo Armband

Khalid H. Tantawi1, Enass Mohamed, Erkan Kaplanoglu2, Austin Pemberton, Navar Pickard, Mike Dyer, Ethan Hickman, and Kaleb Thompson, Department of Engineering Management and Technology, University of Tennessee at Chattanooga, Chattanooga, TN 37403, USA

ID 567      Packaging Process Optimization Using Six Sigma          

Sobhi Mejjaouli and Sarah Algublan, Industrial Engineering Department Alfaisal University, Riyadh, KSA

ID 568      Branch Network Optimization Model following Two Banks Merger 

Sobhi Mejjaouli and Sara Qanaq, Industrial Engineering Department, Alfaisal University, Riyadh, KSA

ID 569      Towards Cyber Security: An Evaluation of methods for Malware Analysis    

Prudence Kadebu, Kudakwashe Zvarevashe, Addlight Mukwazvure, and Fungai N Mukora, Faculty of Computer Engineering, Informatic and Communications, University of Zimbabwe, 630 Churchill Avenue, Mount Pleasant, Harare, Zimbabwe

Innocent Mapanga, Southern Business Solutions, Caramba Park, Phakalane, Gaborone Botswana

Tatenda T Gotora, Midlands State University, Senga, Gweru, Zimbabwe

ID 570        Industry 4.0: Implementation and Research Trends    

Nourredine Boubekri, Professor, Department of Mechanical Engineering, College of Engineering, University of North Texas, Denton, Texas, USA

ID 571 Lessons Learned Integrating Industry 4.0 into an Educational Program 

Robert Van Til, Chair and Pawley Professor of Lean Studies, Department of Industrial and Systems Engineering, Oakland University, Rochester, Michigan, USA

ID 572      An investigation into the synergy of the root cause analysis and Poka Yoke at suppliers of Toyota South Africa Manufacturing (TSAM) and a cable manufacturing company in South Africa

John Zvidzayi, South Africa

ID 574      Flexible Manufacturing System evolving with IPPS processing system and Production Order

Gideon Halevi, retired – Director of CAD/CAM R&D Center at IMI Corporation, Technion Haifa, Israel

Rakesh Kumar Phanden, Amity University, India

Aaryan Sheokand, India

ID 575     Digitalization of Production Processes

Corrado Felice la Forgia, Vice President Engineering and Manufacturing, VHIT S.p.A. – Società, Unipersonale, Strada Vicinale delle Sabbione, 5, 26010 OFFANENGO, (Cremona) | ITALIA

ID 580     Towards a New philosophy for Repositioning, and Repurposing Technical Vocational Education and Training for Industrial Engineering and Operations Management Systems and Development in Africa: A Case of Zimbabwe             

Tafadzwa Mudondo, Principal, Harare Polytechnic, Zimbabwe

ID 581      Genetic Purity Solutions and Associated Algorithms for Conforming Seed Lots or (Any Industrial Blend) to Stipulated Certification Standards of Quality    

Ephrame Kudzaishe Havazvidi, SeedCo Rattray Arnold Research Station Hub, Chisipite, Harare, Zimbabwe

ID 582     The Role of Entrepreneurship Study in Developing The Abilities of Students to be Young Entrepreneurs: Empirical Study in Universitas Negeri Medan, Indonesia      

Haikal Rahman, Department of Business Digital, Universitas Negeri Medan, Medan, Indonesia

Rahmatsyah, Department of Physics, Universitas Negeri Medan, Medan, Indonesia

Ali Fikri Hasibuan, Department of Entrepreneurship, Universitas Negeri Medan, Medan, Indonesia

Rangga Restu Prayogo, Department of Entrepreneurship, Universitas Negeri Medan, Medan, Indonesia

Gaffar Hafiz Sagala, Department of Business Digital, Universitas Negeri Medan, Medan, Indonesia

Dedi Yusrizal, Department of Business Digital, Universitas Negeri Medan, Medan, Indonesia

ID 583      Does Gender Identification at Birth Correlate with Empathy Level?               

Sophia M. Panigrahi, Stanford Online High School

584 Ocean Acidification, Simulated Statistical Investigation           

Emersen Panigrahi, Stanford Online High School

ID 589      The Effectiveness of Group Mentoring Services in Reducing the Communicatical Anxiety of Students

Lukman Harahap, Layyin Mahfiana, IAIN Surakarta Middle Java, Indonesia
Devit Etika Sari, STAI Miftahul Ula Nganjuk, East Java Indonesia
Muzayyanah Yuliasih, STP Aviasi, Jakarta Indonesia
Rika Istianingrum, Universitas Balikpapan Indonesia

ID 590 Improving the students of the EFL speaking class

Mukhlisin, STAI Miftahul Ula Nganjuk, East Java, Indonesia
Syihaabul Hudaa, Institut Teknologi dan Bisnis Ahmad Dahlan Jakarta Indonesia
Yogi Purnama, Universitas Indraprasta PGRI, Indonesia
Desy Riana Pratiwi, Universitas Padjadjaran Indonesia
Feny Martina, IAIN Bengkulu Indonesia

ID 591   The Impact of CIRC (Cooperative Integrated Reading Composition) In Reading Comprehension Ability by Using the Cooperative Approach      

Muh. Barid Nizarudin Wajdi, STAI Miftahul Ula Nganjuk, East Java, Indonesia

Zelvia Liska Afriani, Heny Friantary, IAIN Bengkulu, Indonesia

Yunita Suryani, Universitas PGRI Ronggolawe Tuban, East Java, Indonesia

Rika Istianingrum, Universitas Balikpapan, Indonesia

ID 592   Information Access, Energy Demand, Supply, Access, Conversion and Trading      

Francis Masawi, Energy and Information Logistics Group Limited (EiL), Harare, Zimbabwe

ID 593   Automotive assembly industry’s Supply chain in the delocalization context: A critical review and an algorithm approach for modeling at a tactical level       

Noredine Sadki and Zoubir El Felsoufi, Laboratory of Mathematical Modeling and Control, Faculty of Sciences and Technologies of Tangier, Tangier, Morocco

Sanae Larioui, ENSIT Engineering School Morocco

ID 595   Capturing Voice-of-the Customer / Client – A Systematic Approach to Greater Customer / Client-Centricity Applying Lean Six Sigma Methodology   

Foad Hosseinkhanli, Director of Quality Assurance, Performance and Business Improvement, Amor Health Services, Inc., Brownsville, Texas, USA

ID 596   Performance Evaluation of some selected Mediums Wind Energy Conversion system for Wind Power Generation at Anyigba, Nigeria  Energy  

Saleh, A. U., Electrical Engineering Department, Universiti Tun Hussein Onn Malaysia, Johor, Malaysia

Suleiman Abdulrahman, Centre for Atmospheric Research, National Space Research and Development Agency, Prince Audu Abubakar University Anyigba, Kogi, Nigeria

Haruna, Y. S., Electrical and Electronics Engineering Department, Abubakar Tafawa Balewa University Bauchi, Bauchi, Nigeria

ID 597   Empire four- Phase ll      

Logeshwari Chandramohan, Wilcox High School, Santa Clara, CA 95051, USA

ID 598   Multicultural Education in a Religious Life: Developing Harmony among Religions in Southeast Asia

Mukhamad Ilyasin, Zamroni, IAIN Samarinda, Borneo, Indonesia

Hasan Baharun, Nurul Jadid University, Probolinggo, East Java, Indonesia

ID 599   The Islamic Working Culture of BRI Syariah and Its Influence on Employee Performance (Case Study at BRI Syariah Banyuwangi Branch)   

Nurul Inayah, Institut Agama Islam Darussalam, Blokagung, Banyuwangi, Indonesia

Abdul Kholiq Syafaat, UIN Sunan Ampel Surabaya, East Java, Indonesia

Dwi Novaria Misidiawati, IAIN Pekalongan, Indonesia

Ahmad Hariyadi, IKIP PGRI Bojonegoro, East Java, Indonesia

Endah Yuliani, UNIPA Surabaya, Indonesia

ID 600   Governance and Organization Theory Crisis    

Pristiwantiyasih, university 17 Agustus 1945 Banyuwangi

Murdijanto Purbangkoro, Maya Ida Kesumawatie, and Parwita Setya Wardhani, school of Economic Mahardhika Surabaya, Indonesia

Dina Novita, University Kartini, Indonesia

ID 601   The Importance of Character Education in Higher Education (University) in Building the Quality Students          

Rif ‘ah, IAI Ibrohimy Situbondo, East Java, Indonesia

Hosaini, Universitas Bondowoso, East Java, Indonesia

Winci Firdaus, Badan Pengembangan dan Pembinaan Bahasa, Indonesia

Ixsir Eliya, Achmad Ja’far Sodik, IAIN Bengkulu Indonesia

ID 602   Job Rotation and Work Motivation on Employee Performance with Job Satisfaction as Intervening Variable Case Study on Cement Plant Partnership in East Java      

Wulandari Harjanti, School of Economic Mahardhika, Surabaya, East Java, Indonesia

Suhermin, School of Economic Mahardhika, Surabaya, East Java, Indonesia

Sri Rahayu, School of Economic Mahardhika, Surabaya, East Java, Indonesia

Roy Sumaryono, School of Economic Mahardhika, Surabaya, East Java, Indonesia

Miya Dewi Suprihandari, School of Economic Mahardhika, Surabaya, East Java, Indonesia

ID 603   The Effect of Financial Performance of Corporate Social Responsibility Disclosure in Companies in Indonesia Stock Exchange Period 2014-2016    

Yulinartati, Norita Citra Yuliarti, and Gardina Aulin Nuha, University of Muhammadiyah, Jember, Indonesia

Lely Ana Ferawati Ekaningsih, Institute of Islamic Studies Darussalam, Banyuwangi, Indonesia

Febrianty, Politeknik Palcomtech, Indonesia

ID 604   The Application of Performance Appraisal on Learning the Benefits and Advantages of Test Competencies to Vocation High School Beauty Programs     

Emy Indaryani, Hartati Muchtar, and Diana Nomida Musnir, Education Technology, Universitas Negeri Jakarta, Jl. Rawamangun Muka, Jakarta Timur, Indonesia

610        A Systematic Review: Nurses’ Experiences the Quality of  Independent Nursing Actions               Entrepreneurship              Muhammad Ikhsan         Setiawan             Narotama University               Indonesia

ID 611      The Mediating Role of Organizational Commitment in Relationship Between Organizational Communication on Knowledge Sharing

Aldino Achmad Affandie, Andrie Sulistiyono, Dewi Mayasari, Narotama University, Surabaya, Indonesia

Joko Suyono, Narotama University, Surabaya, Indonesia and Universitas Airlangga, Surabaya, Indonesia

Damarsari Ratnasahara Elisabeth, Sekolah Tinggi lmu Ekonomi Mahardhika, Surabaya, Indonesia

612        The Mediating Role of Job Satisfaction in Relationship Between Work Discipline on Employee Performance  Entrepreneurship              Muhammad Ikhsan         Setiawan               Narotama University       Indonesia

613        Analysis of the Effect of Work Discipline and Reward on Work Performance Through Work Motivation              Entrepreneurship              Muhammad Ikhsan         Setiawan               Narotama University       Indonesia

614        Designing a Modern Partial Deck AKQJ Poker Game To Aid In Reducing Gambling Disorder               Healthcare Systems         Siddhant              Karmali Stanford University Online High School        United States

615        Innovative Industrialisation – the Impact of Education 5.0 on University Operations in COVID-19 Times               Global Engineering Education      Mqhele Dlodlo   National University of Science and Technology Zimbabwe

616        Maintenance Prediction by Machine learning: Study Review of some Supervised Learning Algorithms        Artificial Intelligence       Mouna  Tarik      Faculty of science and techniques          Morocco

617        The rise and rise of Financial Technology:  Lessons for Industrial Engineering                        Nqobile Munzara                             Zimbabwe

ID 618      The Mediating Role of Employment Opportunities in Relationahip with Brand Image on The Decision of Selecting Business Studies

Dian Arisanti, Sekolah Tinggi Ilmu Administrasi dan Manajemen Kepelabuhan Barunawati Surabaya, Indonesia

Hermien Tridayanti, Narotama University, Surabaya, Indonesia

Joko Suyono, Narotama University, Surabaya, Indonesia and Universitas Airlangga, Surabaya, Indonesia

Damarsari Ratnasahara Elisabeth, Sekolah Tinggi Ilmu Ekonomi Mahardhika, Surabaya, Indonesia

619        Strategy of Performance Development of Indonesia Aerodrome Inspector in 2020               Entrepreneurship              Muhammad Ikhsan         Setiawan             Narotama University               Indonesia

ID 620      Brand Satisfaction, Brand Trust and Brand Loyalty

Fathorrahman, Sekolah Tinggi Ilmu Ekonomi Asia, Malang, Indonesia

Astrid Puspaningrum, Universitas Brawijaya, Malang, Indonesia

Joko Suyono, Narotama University, Surabaya, Indonesia

621        The Mediating Role of  Knowledge Sharing in Relationship Between Organizational Culture and Employee Performance         Entrepreneurship              Muhammad Ikhsan               Setiawan             Narotama University       Indonesia

622        The Mediating Role of  Job Satisfaction in Relationship Between Organizational Justice and Employee Performance         Entrepreneurship              Muhammad Ikhsan         Setiawan               Narotama University       Indonesia

623        Component Campaign Against Attitudes Vote in the Elections in 2010               Entrepreneurship              Muhammad Ikhsan         Setiawan             Narotama University               Indonesia

624        Antecedents of Job Performance at the Ship Design Company in Surabaya               Entrepreneurship              Muhammad Ikhsan         Setiawan             Narotama University               Indonesia

625        The Antecedent of Job Satisfaction and Employee Loyalty: Financial Rewards and Work Motivation          Entrepreneurship              Muhammad Ikhsan         Setiawan             Narotama University            Indonesia

626        The Determinant Factors Of Work Life Quality And Employee Performance : Motivation And Job Satisfaction Entrepreneurship              Muhammad Ikhsan         Setiawan               Narotama University       Indonesia

ID 627      Millennial Employees Performance, Transformational Leadership and Organization Communication

Nugroho Dwi Priyohadi, Universitas Airlangga, Faculty of Psychology, Surabaya, Indonesia

Sekolah Tinggi Ilmu Administrasi Dan Manajemen Kepelabuhan (Stiamak) Barunawati, Surabaya, Indonesia

Nur Widyawati, Sekolah Tinggi Ilmu Administrasi Dan Manajemen Kepelabuhan (Stiamak) Barunawati, Surabaya, Indonesia

Joko Suyono, Narotama University, Surabaya, Indonesia and Universitas Airlangga, Surabaya, Indonesia

ID 628      Implementation of Corporate Social Responsibility on Corporate Reputation Through Social Capital Strengthening and Increasing Community Welfare          

Sukaris, Management Department, Faculty of Economics and Business, Universitas Muhammadiyah Gresik, Gresik Regency, East Java, Indonesia

Nadhirotul Laily, Psychology Study Program, Universitas Muhammadiyah Gresik, Gresik Regency, East Java, Indonesia

Damarsari Ratnasahara Elisabeth, Management Department Sekolah Tinggi Ilmu Ekonomi Mahardhika, Surabaya, Indonesia

Joko Suyono, Department of Management and Business, Narotama University, Surabaya, Indonesia 60117

Hendra Suwardana, Universitas PGRI Ronggolawe, Tuban, Indonesia

629        Presidential Election Prediction Model Validation
Saloni    Patel      Stanford Online High School        United States

630        A Review of Property Attributes Influence in Hedonic Pricing Model
Hamza   Usman  Universiti Tun Hussein Onn Malaysia;  Abubakar Tafawa Balewa University, Bauchi.           Malaysia

631        Review of Issues in the Conventional Hedonic Property Pricing Model
Hamza   Usman  Universiti Tun Hussein Onn Malaysia;  Abubakar Tafawa Balewa University, Bauchi.           Malaysia

632        An Investigation On The Level Of Use Of Lean Principles In The Small And Medium Enterprises; The Case Of The South African Construction Industry: Literature Review
Davison Makondo             University of Johannesburg          South Africa

633        Investigating the Role of Benchmarking as a Cost Control Measure: Lessons from Selected Restaurants in Johannesburg, South Africa
Matildah              Gumbo  Rocomamas       South Africa

634        Statistical Modeling of Stock Investment During COVID-19
Chi-hong              Ho          Henry M. Gunn High School         United States

635        NBA Player Aging Influence & Benchmarking Analysis
Chi-Feng              Ho          Henry M. Gunn High School         United States

636        Synthesising Lean Construction and Building Information Modelling to improve the South African Architecture, Construction and Engineering Industries: A literature review
Nischolan            Pillay      Nischolan Pillay South Africa

637        Monte Carlo Simulations in Poker and Gambling
Arhan    Surapaneni          Stanford Online High School        United States

638        Opportunistic maintenance under product–service system for usage based transportation system
Hennie  Husniah                Langlangbuana University            Indonesia

639        Improvement in the manufacturing process
Anthony               Sene               Facens   Brazil

640        Design and Incorporation of a New Facility in a Country Wide Logistics Network
Héctor Adrián     Lozano  Universidad de Monterrey     Mexico

ID 641      STEAMS Methodology of Sports Science and Injury

Mason Chen and Lily Sun, Stanford OHS, San Francisco, United States 

ID 649      A Preliminary Study on the Relationship between Financial Literacy and Business Performance among Entrepreneurs in Bauchi Metropolis, Nigeria        

Wan Fauziah Wan Yusoff and Usama Khadijah Muhammad, Universiti Tun Hussein Onn Malaysia

ID 650      Modeling COVID-19 Cummulative Data in Indonesia using Morgan-Mercer-Flodin Growth Equation

Asep Kuswandi Supriatna, Universitas Padjadjaran, Indonesia
Hennie Husniah, Langlangbuana University, Indonesia

ID 651      Validate NBA 2015-2019 Regular Season MVP Winners   

Mason Chen, Stanford OHS, San Francisco, United States

ID 652      Implementation Barriers in the Establishment and Management of BUMDESA in Deli Serdang City, Indonesia              

Rangga Restu Prayogo, UNIMED, Indonesia

ID 653      Integrated Waste Management System among College Students

Muhammad Ikhsan  Setiawan, Narotama University, Indonesia
Anita Dewi Moelyaningrum, Department of Environmental Health and Occupational Health and Safety, Public Health Faculty, Universitas Jember, Indonesia
Dheasy Herawati, Faculty of Health Sciences, Universitas Maarif Hasyim Latif, Ngelom Megare, Sidoarjo, Indonesia
Khoirul Ngibad, Program Studi D3 Teknologi Laboratorium Medik, Fakultas Ilmu Kesehatan Universitas Maarif Hasyim Latif, Indonesia
Prayogi Sunu, Departement of Animal Science, Faculty of Animal Science, Boyolali University, Boyolali, Indonesia

ID 654      Design of Electro-Hydraulic Circuits of Tri-adjustable Automated Heavy-Duty Industrial Handling System

Daramy Kallon and Shaun Mafokwane, University of Johannesburg, South Africa

ID 655      Appraising Project Management Methodologies to harness effective evaluation and control

Syeda Asiya Zenab Kazmi, Industrial Mgt., Production Dept., University of Vaasa, Finland

ID 656      Proactive procurement of services; An Innovation to Small Businesses’ Operational Management Dimension            

Syeda Asiya Zenab Kazmi, Industrial Mgt., Production Dept., University of Vaasa, Finland

 

ID 657     Product Value Enhancement by Manufacturing Process Optimization & Tolerances Standardization

Vinay Kumar Singh, Devi Ahilya Vishwavidyalaya, Indore (MP), India

ID 658      Using Statistical Process Control to improve the quality in Utility plant

Marwan Al Obaidi and Jinendra Ijari, A. Leon Linton Department of Mechanical, Robotics and Industrial Engineering, Lawrence Technological University, Southfield, MI 48075, USA

ID 660      The Impact of Internet of Things on Supply Chain Performance

Maha Abdel Hamid Morssi, Hussein Magdy Elhusseiny and Dina Adel Hammad, Logistics and Supply Chain Management Department, Transport and Logistics Management Department, College of International Transport and Logistics, Arab Academy for Science, Technology and Maritime Transport, Alexandria, Egypt

ID 661      Evaluating the Connection between New Product Development (NPD) Team Climate and Organizational Trust: A Case based on Transformational Leadership

Syeda Asiya Zenab Kazmi and Marja Naaranoja, Industrial Mgt., Production Dept., University of Vaasa, Finland

ID 666      Marketplace Effectiveness In Increasing Sales Concentration Of Small Business Products During The Covid19 Pandemic

Wiwik Istyarini, Institute of Economic Science Al-Anwar Mojokerto

I Putu Artaya, Departement of Management, University Narotama Surabaya

Tubagus Purworusmiardi, Departement of Management, University Narotama Surabaya

Agus Sukoco, Departement of Management, University Narotama Surabaya

Made Kamisutara, Departement of Computer Science, University Narotama Surabaya

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia 

ID 667      The Application Of Program Monitoring The Health Of The Baby Through The SMS-Based Immunization Activities

Made Kamisutara, Departemen of Computer Science, University Narotama Surabaya

I Putu Artaya, Departemen of Management, University Narotama Surabaya

Tubagus Purworusmiardi, Departemen of Management, University Narotama Surabaya

Agus Sukoco, Departemen of Management, University Narotama Surabaya

IGA Sri Deviyanti, Departemen of Management Industries, University WR. Supratman Surabaya

Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

---