Posters

Technical posters can be presented at the IEOM Malaysia event during March 8 -10, 2016  at the JW Marriott Kuala Lumpur hotel. IEOM poster size is  36″ x 24″ (36 inches high by  24 inches wide).

IEOM Poster Guidelines

• Include a title, authors and contact information at the top of the poster
• Keep any write up brief.
• Use graphics: charts, pictures, and tables
• Include overview, objectives, methods, results, and conclusion.
• Organize the presentation so that it is clear, orderly, and self-explanatory
• Poster should be 3’ wide x 4’ high (121 cm x 91 cm) or 2 feet wide x 3 feet high.

IEOM Poster Template

 

Contact: info@ieomsociety.org.

---

Posters

ID 006      Industrial Data Communication- PLC and External Application       
Tanoy Kumar Paul and Manoj B., Siemens, Bangalore, India

ID 007      Measurement and Prediction of Condensate Gas Hydrates Formation Conditions – A Study Case
Mimoun Hadj, Laboratory of Hydrocarbons technology, Dept. of Chemistry, Faculty of Hydrocarbons & Chemistry, University Mhamed Bouguerra of Boumerdes, Algeria.
Samer Said, Laboratory of Materials Science (LCMVAR), Dept. of Chemistry, Faculty of Science, University Hadj Lakhdar of Batna, Algeria
Otmanine Ghazi, Laboratory of Hydrocarbons Technology, Dept. of Chemistry, Faculty of Hydrocarbons & Chemistry, Univ. Mhamed Bouguerra of Boumerdes, Algeria
Belloum Mohamed, Laboratory of Materials Science (LCMVAR), Dept. of Chemistry, Faculty of Science, University Hadj Lakhdar of Batna, Algeria

ID 036      Microstructural and Electrical properties of Screen-printed N+ Emitter of P-type Monocrystalline Silicon Solar cell
Chel-Jong Choi, Chonbuk National University, Jeonju-si, Jeollabuk-do, Korea

ID 048      Debugging Operation of Automated Assembly Lne using Signal Noise Ratio 
Masatoshi Kitaoka, Kanagawa University, Yokohama city, Japan
Hitosh Takeda, Bunkyo University, Chigasaki, Kanagawa, Japan

ID 049      Model for Estimation of Interurban Passenger Transportation Scheme
Santiago-Omar Caballero-Morales, Universidad Popular Autónoma del Estado de Puebla, Puebla, Mexico
Gladys Bonilla Enriquez, Universidad Popular Autonoma del Estado de Puebla, Puebla, Mexico

ID 067      Your Opinion Matters: A Cross-Sectional Study on Happiness among Older Adults in Siberia
Ekaterina Taran, Galina Barysheva and Elena Frolova, Tomsk Polytechnic University, Tomsk, Russian Federation
Fabio Casati and Giacomo Arrighini, The University of Trento, Italy

ID 108      Integration of economic and environmental aspects in sustainable supply chain management: a review  
Noraida Azura Darom and Hawa Hishamuddin, Universiti Kebangsaan Malaysia, Bandar Baru Bangi, Selangor, Malaysia

ID 116      Characterization and Modeling of Rheological Behavior of a System of Mud a Reverse Emulsion
Mellak Abderrahmane, Boumerdes University – Algeria, Boumerdes, Algeria
Kaddour El Heit, Université Mouloud Mammeri, Tizi Ouzou, Algeria

ID 159      Optimization of a Battery Pack in Plug-In Hybrid Electric Vehicles  
Ali ElKamel, University of Waterloo, Waterloo, Ontario, Canada
Rois Fatoni, Chemical Engineering Department, Universitas Muhammadiyah Surakarta, Jawa Tengah, Indonesia
Manoj Mathew, Chemical Engineering Department, University of Waterloo, Waterloo, ON, Canada

ID 166      Implementation of Knowledge Management at Woven Handycraft Industry (Case Study: DI Yogyakarta – Indonesia)
Nofi Erni, Esa Unggul University, Kebon Jeruk, West Jakarta, Indonesia

ID 169      The Design of QTrac: An Automated Quality and Cost Management System for Projects            
Hannelie Nel, Post-Graduate School of Engineering, University of Johannesburg, Johannesburg, Gauteng, South Africa

ID 181      Investigation of structural and physical properties of Al1-xMnx thin films grown by magnetron sputtering: influence of thermal annealing
Majda Mokhtari, Badji Mokhtar-Annaba University, Sidi Amar, Annaba, Algeria

ID 187      Study of surface quality – Effect of fractal dimension and texture parameters 
Mounira Bourebia, Research center in Technologies Industrielles.CRTI.ex-CSC, Chéraga, Annaba, Algeria
Lakhder Laouar, Badji M okhtar University BP12 -2300, Industrial Mechanics Laboratory Annaba, Algeria
Hamid Hamadache, Annaba University, Algeria

ID 188      Effect of inclination of the walls mold on the   primary cooling during the continuous casting    
Mounira Bourebia, Research center in Technologies Industrielles.CRTI.ex-CSC, Chéraga, Annaba, Algeria
Lakhder Laouar, Badji M okhtar University BP12 -2300, Industrial Mechanics Laboratory Annaba, Algeria

ID 206      Selection of Green suppliers based on GSCM practices: Using fuzzy MCDM approach in an Indian Electronics Company
Vijayakumar Manupati, Akshay Uppala, Rohit Sharma and Harshita Raj, VIT University, Vellore, Tamilnadu, India

ID 207      A Social Network Based Optimisation Approach on Patient Admission Scheduling Problem   
Vijayakumar Manupati, Venkat Anirudh Kodali, Shaik Shama Zabeen and Lakkimsetti Sai Prudhvi Siddhartha, VIT University, Vellore, India
Manoj Kakarla, Vit University, Chittoor, Andhra Pradesh, India

ID 208      Analyzing the Effect of Line-Cell Conversion on Manufacturing Systems       
Vijayakumar Manupati and Chaitanya Gangal, Vit University, Vellore, Tamilnadu, India

ID 209      An Integrated Multi-Echelon Stochastic Supply Chain Production-Distribution Model with Carbon Emissions
Rishabh Ranka, Biswajita Mohanty, Manidhar Darisi Venkata, Raj Kumar Singh, Pavan Kumar Kulkarni and Vijayakumar Manupati, School of Mechanical and Building Sciences, Vellore Institute of Technology, Vellore, Tamil Nadu, India

ID 219      Effect of Wire Cutting Process on the Variables of Surface Roughness         
Mustafa A. Rijab, Technical Institute of Baquba, Mechanical Department, Iraq
Ali I. Al-Mosawi, Free Consultation, Babylon, Hilla, Iraq
Muhannad A. Al-Najar, Asia Cell Company, Iraq
Shaymaa Abbas Abdulsada, University of Kufa, Collage of Engineering, Iraq

ID 226      Search an electric prevention by controlling the resistive component of the isolation of an ungrounded low voltage electrical network  
Abderrezak Hocine, University Badji Mokhtar, Sidi Amar, Annaba, Algeria

ID 253      Project Management for New Sputtering System Development   
Yao-Chin, Wang Blue Bee System Integration Ltd., Tainan, Taiwan

ID 255      A Hybrid Genetic Algorithm for Solving Facility Location-Allocation Problem
Farzad Firouzi Jahantigh, Department of Industrial Engineering, University of Sistan and Baluchestan, Zahedan, Iran
Behnam Malmir, Department of Industrial and Manufacturing Systems Engineering, Kansas State University, Manhattan, USA

ID 260      Lean Supplier Selection: A Data Envelopment Analysis (DEA) Approach       
Masoud Rahiminezhad Galankashi, Department of Material, Manufacturing and Industrial Engineering, Universiti Teknologi Malaysia
Muhammad Hisjam, Department of Industrial Engineering, Faculty of Engineering, Sebelas Maret University, Surakarta, Indonesia
Syed Ahmad Helmi, Department of Material, Manufacturing and Industrial Engineering, Universiti Teknologi Malaysia, Johor, Malaysia

ID 261      Applying 5S Method on Trims Store’s Documentation System in an Apparel Industry  
Ishat Islam, SQBL, Rangpur, Rangpur, Bangladesh

ID 274      Agile Supplier Selection: A Fuzzy Analytic Hierarchy Process (FAHP) Approach  
Masoud Rahiminezhad Galankashi, Mohammad Hisjam and Syed Ahmad Helmi, UTM, Skudai, Johor, Malaysia

ID 276      Mix Maker Ants: Inspiration for Multiple Objective Optimization
Hassan Soltan, Mansoura University, Mansoura 35516 Egypt
Sherif Mostafa, University of South Australia, Adelaide, SA 5000 Australia

ID 279        Project Investment Decision Considering Background Risks  
Yao Zhang and Xin Guan, School of Business Administration, Northeastern University, Shenyang, China

ID 282      Heat transfer through fire fighter’s protective clothing exposed to thermal radiation.    
Zaina Norhallis Zainol and Masine Md Tap, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia

ID 293      Determination of Burn-in Period Based on Reliabality Target for Product Failure Time with Weibull Distribution
Innah Dominique Puertollano and Michelle Joy Macapuno, Mapua Institute of Technology, Manila, Philippines
Ying Che Chien, Chung Yuan Christian University, Taiwan

ID 316      Stochastic Dynamic Optimization of Engineering Processes          
Fethi H. Bellamine, The National Institute of Applied Science and Technology in Tunis, Centre Urbain Nord, Tunis Cedex, Tunisia
Muhamad Fariz Failaka and Ali Elkamel, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada

ID 341      Automatic Screening Unqualified Result in Emotional Quotient Test
Suwilai Areejit, Bangkok Thonburi University, Taweewatana, Bangkok, Thailand

ID 364      An alternative approach to criticality analysis of industrial risks     
Nouara Ouazraoui, University of Batna-Algeria, Batna, Algeria

ID 378      Quantitative Optimization of Nurses in Emergency Department of Teaching Hospital: A case study
Ali Mouseli, Health Care Management, Research Center for Health Services Management, Institute of Futures Studies in Health, Kerman Univ. of Medical Sciences, Iran
Mohammad Hosein Mehrolhasani, Research Center for Health Services Management, Institute of Futures Studies in Health, Kerman University of Medical Sciences, Kerman, Iran, Mechanical and Industrial Engineering
Zahra Mastaneh, Department of Health Information Management and Technology, School of Paramedicine, Hormozgan Univ. of Medical Sciences, Bandar-Abbas, Iran
Leila Vali, Environmental Health Engineering Research center, Kerman University of Medical Sciences, Kerman, Iran

ID 380      Reduction of chatter vibrations by management of the cutting tool 
Bourdim Abdelghfour, University of Tlemcen, Tlemcen, Algeria
Bourdim Mokhtar, University Center of Relizane, Tlemcen, Algeri

ID 434      Identifying Factors Affecting Entrepreneurial Sustainable Development (Case Study: Knowledge-Based Start-Ups of Science and Technology Park of Tehran University)    
Niloofar Tavakoly Nabavy, Babak Zia and Shiva Vosoughi, Tehran, Iran

ID 446      Implementation in-situ auto polishing rate optimization for chemical mechanical planarization process in semiconductor fabrication industry    
Mohamed Ariff Shri Abdul Aziz and Mohamad Zambri Mohd Darudin, Silterra Malaysia Sdn Bhd, Kulim, Kedah, Malaysia
Samad Ramlan, Mohamed Ariff Shri Abdul Aziz and Mohamad Zambri Mohd Darudin, Silterra Malaysia Sdn. Bhd., Kulim Hi-Tech Park, Kulim, Kedah, Malaysia
Muhammad Hafidz Fazli Md Fauadi and Mohd Razali Muhamad, Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia – Melaka, Malaysia

ID 482      Using several intelligences for complex industrial process monitoring: detection and diagnosis
Hayet Mouss, Nafissa Rezki, Okba Kazar, Laid Kahloul and Djamil Rezki, Batna 2 University, Batna, Algeria

ID 489      Assessment of Business Processes in Consolidated Patient Account Centers
Shaiju Eapen, Department of Veterans Affairs USA, Shelby Township, Michigan, United States

ID 520      Optimal Pricing Strategy for Multi-generations Durable   Products with a Trade-in Program
Hui-Chiung Lo, Tamkang University, New Taipei City, Taiwan

ID 528      Analytical Study of Pecking Order Theory of Capital Stucture; Evidence from Malaysia
Hamed Emami, Project Management Office, ZKJ Co., Esfahan, Iran
Maryam Rahimi Tehrani, Finance Division, DejDis Sepahan, Esfahan, Iran

ID 530      A study on the Profitability Analysis of Power Grid Corporation of India Ltd  
Prabhneet Kaur Sethi, Department of Applied Mathematics, Amity University, Noida, Uttar Pradesh, India
Surbhi Gupta, Amity University, Noida, Uttar Pradesh, India
Prabhneet Kaur Sethi, Amity University, Noida, Uttar Pradesh, India
Mohit Gupta, Power Grid Corporation of India Ltd., Delhi, India

ID 562      Contour Approach for Analysis of Minimum Regions for the Economic Statistical Design of X-bar Control Charts
Abdur Rahim, University of New Brunswick, Fredericton, New Brunswick, Canada
Santiago-Omar Caballero-Morales, Universidad Popular Autónoma del Estado de Puebla, Puebla, Mexico

ID 563      A Review of Models for Optimal Bio-products Syntheses from Oil Palm Empty Fruit Bunch (EFB)
Ali ElKamel, University of Waterloo, Ontario, Canada
Rois Fatoni, Chemical Engineering Department, Universitas Muhammadiyah Surakarta, Jawa Tengah, Indonesia
Abdulhalim Abdulrazik and Mahyar Abolhallaj, University of Waterloo, ON, Canada

ID 571      The Effects of Lean Production Tools and Techniques Implementation at Malaysian Manufacturing and Service Industries: A Case Study Review
Musli Mohammad, Badrul Omar, Mohd Shahir Yahya and Edly Ferdin Ramly, Universiti Tun Hussein Onn, Johor, Malaysia

ID 574      Crystallization kinetics and thermal behaviors of nanoclay dispersed jute reinforced composite 
Sazib Mollik, IIUM, Gombak, Selangor, Malaysia

ID 575      Model of Logistics Management of the Supply Chain (LMSC) to Improve the Production Sector of Perishable Food Integrated by Small and Medium Enterprises in Mexico      
Gladys Bonilla Enriquez, Universidad Popular Autonoma del Estado de Puebla, Mexico
Cano Olivos, Universidad Popular Autónoma de Estado de Puebla, Mexico

ID 641      Alternative solution for the pipeline transport of viscous oil using the heaters in pumping stations.
Amar Benmounah and Ammar Chebouba, Dept. of Transport and Equipment of Hydrocarbons, Faculty of Hydrocarbons and Chemistry. UMBB, Boumerdes, Algeria

ID 666:     Desalination of Seawater Research Project on the Basis of the Positive Results of Water Treatment by Magnetic Field
Abderrahmane Bellaouar, Department of Process Engineering, Amar TelidjiUniversity of Laghouat, Laghouat, Algeria
Farid Touiti, Research and Development Technologies Laboratory, Afro-Energy Corporation Ltd., Metlili, Algeria

ID 674      Rework Reduction in KHS Machinery Pvt. Ltd.
Dharmil Bavishi, Juhi Gupta, Gaurav Banthia, Parul Maroo, and Richa Grover, Industrial Engineering, Pandit Deendayal Petroleum University

ID 685 Need for Deployment of RFID Technology in Indian Hospitals
Parul Maroo, Industrial Engineering, Pandit Deendayal Petroleum University, Raisan, Gandhinagar, Gujarat, India

ID 698      Predicting Seasonal Demand with Bayesian Generalized Linear Model
Mohammad Anwar Rahman, Manufacturing & Construction Management, Central Connecticut State University, New Britain, Connecticut, USA
Ahad Ali and Gomanth Duvvuru, Lawrence Technological University, Southfield, Michigan, USA

ID 699      Impacts of 5S Implementation
Richa Grover, Shailee Dalal and Aditya Singh, Industrial Engineering Department, Pandit Deendayal Petroleun University, India

ID 701      Resource Management for Workflows in Cloud Computing Environment Based On Group Technology Approach
Saleh Shahdi-Pashaki, Department of Industrial Engineering, Shomal University, Amol, Iran
Ehsan Teymourian, School of Mechanical, Industrial, and Manufacturing Engineering, Oregon State University, Corvallis, USA
Vahid Kayvanfar, Department of Industrial Engineering, Amirkabir University of Technology, Tehran, Iran
Koorosh Mashhadi Alizadeh, Department of Industrial Engineering, Sadjad University of Technology, Mashhad, Iran

ID 719      Mean-Variance Portfolio Optimization on Some Stocks by Using Non Constant Mean and Volatility Models Approaches
Endang Soeryana Hasbullah, Department of Mathematics, Faculty of Mathematics and Natural Sci., Universitas Padjadjaran Bandung – Indonesia
Nur Fadhlina bt Abdul Halim, School of Informatics and Applied Mathematics, Universiti Malaysia Terengganu, Malaysia
Sukono, Endang Rusyaman and Sudradjat Supian, Dept. of Mathematics, Universitas Padjadjaran, Bandung – Indonesia

ID 720      Applications De Bruijn Graphs of Hamiltonian and Eulerian Cycles to Fault Tolerant Networks
Mochamad Suyudi, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Bandung, Indonesia
Roslan Bin Hasni Abdullah, School of Informatics and Applied Mathematics, Universiti Malaysia Terengganu, Malaysia
Sudrajat Supian and Asep Kuswandi Supriatna, Department of Mathematics, Universitas Padjadjaran, Bandung – Indonesia

ID 721      Model Predictive Control for Automobiles
Yash Deepak Gandhi and Maheep Singh Rathore, Pandit Dendayal Petroleum University, Ahmedabad, Gujrat, India

ID 722      Quater Car Analysis Using Simulink
Yash Deepak Gandhi, Shailee Dalal and Anurag Nehra, Pandit Dendayal Petroleum University, Ahmedabad, Gujrat, India

ID 723      Water Quality Improvement of Ganga
Juhi Gupta, Jayval Amlani, Nisarg Shah and Hari Shukla, Pandit Dendayal Petroleum University, India

ID 724      A3 Thinking and Application
Hari Shukla, Nimesh Thakkar and Manish Panseriya, Industrial Engineering, Pandit Dendayal Petroleum University, India

ID 725: Customer Complaint Handling System
Manish Panseriya and Hari Shukla, Pandit Dendayal Petroleum University, India

 

Senior Design Project / Final Year Project (FYP) Poster Presentation Competition

ID 310      Optimization of Warehouse Operations for Logistics Company in the Philippines
Stephanie B. Duque, Maricar M. Navarro, Bernaliza O. Verrey, Jovale C. Vitao, Sherilyn M. Zantua and Rosalia F. Gabuya, Industrial Engineering Department, Technological Institute of the Philippines, Quezon City, Philippines

ID 461      Investigation of Propagation and Permeability Modification of Grafted Bentonite Particles in Porous Media
Nurul Hanisah Alauddin, Nur Asyraf Md Akhir and Abdulazim Abass, Universiti Teknologi Petronas, Bandar Seri Iskandar, Perak, Malaysia

ID 604      Prioritization of patients with Communication Disorders
Daoud Ait Kadi, Samira Abbasgholizadeh Rahimi and Angel Ruiz, Université Laval, Quebec, QC, Canada

ID 683:    Designing Personalized Tourism Packages for Oman Tourism Industry
Abdulwahab M., Amur M., Rashid H. and S. Piya, College of Engineering, Sultan Qaboos University, Oman