ISSN: 2691-7734 (print), ISSN: 2691-7726 (online)
Conference Program Proceedings
A Virtual Conference (Submission Deadline – October 30, 2020)
Website: https://ieomsociety.org/ieom/imeom2020/
Facebook page: https://www.facebook.com/ieombd/
Submission Link: https://www.xcdsystem.com/IEOM/abstract/index.cfm?ID=D2dl2rv
PAPER.docx Paper and Abstract Templates ABSTRACT.docx
Keynote Speakers
- Dr. Rauf Iqbal, Associate Professor, Ergonomics and Human Factors Engineering, National Institute of Industrial Engineering, Mumbai, Maharashtra, India
- Dr. Abdul Talib Bon, Professor of Technology Management, Department of Production and Operations Management, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia
- Prof. Dr Mohammad Patwary, Director of Centre for Future Networks & Autonomous Systems, University of Wolverhampton, UK
- Prof. Syed Akheel Ahmed, MSc. Ph.D., Former Vice Chancellor, Yenepoya University, Icon Professor, University of Malaya, Malaysia
- Dr. Nita H. Shah, Professor and Head of department of Mathematics, Department of Mathematics, Gujarat University, Navrangpura, Ahmedabad, Gujarat, India and Council member of Indian Mathematical Society
The international conference (IMEOM 2020) invites research papers from the academics, professionals, engineers, researchers, technologists and scientist from all over the world. Industrial Engineering and Operations Management (IEOM) Society of Bangladesh, abbreviated as IEOM BD, was founded in 2015-16. It is a Bangladesh country chapter, also known as professional section, of Industrial Engineering and Operations Management (IEOM) Society. The IEOM Society of Bangladesh is going to organize the 2nd International conference on Industrial and Mechanical Engineering and Operations Management (IMEOM 2018) at Bangladesh Institute of Management, Dhaka, Bangladesh. The objective of the conference is to share the knowledge and publish quality articles from the traditional and advanced areas IPE and ME discipline. The conference scopes will be covering the various areas of Industrial and Production Engineering (IPE) and Mechanical Engineering (ME) topics including all new emerging technologies related to these fields of engineering and science. Our aim is to bring the professionals, engineers, academicians, researchers, and scientist community who will contribute in this conference by sharing their experiences and knowledge. The accepted papers will be published in the indexed conference proceedings, which will be peer reviewed and will be available online.
Special Tracks
- Industry 4.0 – IoT, iCloud, AI, Data Analytics, Robotics/Automation, Modeling, Simulation & Visualization, Cybersecurity, and Additive Manufacturing / Digital Industries
- Global Engineering Education
- Healthcare Systems Engineering
- Smart Mobility
- Business Analytics
- Student papers competition
- Student innovative idea competition – product or services
Proceedings: ISSN: 2691-7734 (print), ISSN: 2691-7726 (online)
- 1st IMEOM Conference Proceedings 2017: https://ieomsociety.org/ieom/dhaka2017-proceedings/
- 2nd IMEOM Conference Proceedings 2019: https://ieomsociety.org/ieom/dhaka2019-proceedings/
- 3rd IMEOM Conference Proceedings 2020: TBA after the conference
Papers are added in IEOM Forefront
Organizing Committee Leadership
- Prof. Dr. M Sarwar Morshed, AUST – Conference Chair
- Prof. Dr. Mohammad Iqbal, SUST – Conference Co-chair
- Dr. A.R.M. Harunur Rashid, IUT – Conference Secretary
- Prof Dr. Md. Haider Ali Biswas, KU – Conference Hon. Treasurer
Organizing Committee Members
- Prof. Dr. Md. Nurul Absar Chowdhury, IUT
- Prof Dr M Kutubuddin, KUET
- Prof Dr Shamsuddin Ahmed, IUT
- Prof Dr. Md. Mosharraf Hossain, RUET
- Prof Dr. Md. Kamruzzaman, DUET
- Prof. Dr. Sultana Parveen, BUET
- Engr SK Masum Kamal, SKM
- Prof. Dr. A M. M Mukaddes, SUST
- Dr. A.S.M. Mojahidul Hoque, JUST
- Prof. Dr. Md. Mamunur Rashid, BIM
- Dr. Ahad Ali, IEOM, USA
- Dr. Khadem, IEOM, USA
Industry Chair
- Md Kawsar Ali, Chief Operating Officer at Comfit Composite Knit Ltd, Dhaka, Bangladesh
Sponsors
SK Machinery International – http://www.skmachineriesinternational.com/
Registration Fee includes
- Keynote sessions
- Global Engineering Education sessions
- Industry 4.0 and Industry Solutions sessions
- Technical sessions
- Attendance certificate
- Presentation certificate
- Continue Education Unit (CEU-2.0) – based on request
Keynote Speakers
Dr. Rauf Iqbal
Associate Professor
Ergonomics and Human Factors Engineering
National Institute of Industrial Engineering
Mumbai, Maharashtra, India
Prof. Rauf Iqbal is M.Sc. (Ergonomics & Work Physiology), Gold medalist, PhD. He has published 45 papers in International and National Journals. He is co-author of two books. He has presented 70 papers in International and national conferences. Seven scholars have completed P.hD. under his guidance. He is member of various national and international committees like, – BRICS Plus Executive Council for Human Factors and Ergonomics; Council member of Asian Council on Ergonomics and Design; Ergonomics Technical committee for Bureau of Indian Standards; Executive committee member of Indian Society of Ergonomics; Member of Internal Quality Assurance Cell, Board of Studies of SNDT Women’s University, Mumbai; Member of Internal Quality Assurance Cell, NIFT, Mumbai.
He has reviewed journal papers for Taylor & Francis Group, UK and Roessingh Research and Development, Netherlands. He is editorial board member of Malaysian Journal of Ergonomics. He has examined PhD thesis from various national and international universities. He has carried out various projects funded by Govt. of India and International Labour Organization. He has been conducting training programmes for various industries. He has conducted a large number of industrial consultancies on ergonomics, work study, work systems design and Safety
Dr. Abdul Talib Bon
Professor of Technology Management
Department of Production and Operations Management
Faculty of Technology Management and Business
Universiti Tun Hussein Onn Malaysia
Dr. Abdul Talib Bon is Professor of Technology Management in Department of Production and Operations Management, Faculty of Technology Management and Business at the Universiti Tun Hussein Onn Malaysia. He has a PhD in Computer Science, which he obtained from the Universite de La Rochelle, France in the year 2008. His doctoral thesis was on topic Process Quality Improvement on Beltline Moulding Manufacturing. He studied Business Administration major in Quality Management at the master’s level in the Universiti Kebangsaan Malaysia for which he was awarded the MBA in the year 1998. He’s bachelor degree and diploma in Mechanical Engineering which his obtained from the Universiti Teknologi Malaysia. He received his postgraduate certificate in Mechatronics and Robotics from Carlisle, United Kingdom in 1997. He is Managing Director of UTHM Teaching Factory and Manager of Centre for Technology (Furniture Innovation Technology) from 1 September 2016 and Head of Program Bachelor of Technology Management (Furniture Design and Manufacturing) with Honours from 2014 until now. Before this he was the Deputy Dean (Research and Development) at the Faculty of Technology Management and Business in the Universiti Tun Hussein Onn Malaysia from 2008 until December 2011. Dr. Abdul Talib Bon has had over 28 year experience of teaching in higher learning education. A major part of his teaching experience involves teaching mechanical engineering students in polytechnics. However, from the year 1999, he was given the opportunity to be jointed in the Institut Teknologi Tun Hussein Onn (ITTHO), Universiti Teknologi Malaysia as a lecturer in Mechanical Engineering Department. In this institute, he teaches engineering management and quality control at the under-graduate level. Dr. Abdul Talib Bon has multidisciplinary research interests that encompass industrial engineering, quality management and production and operation management. His completed ten research grant projects include applications of forecasting in industries. His current research project is looking into developing process quality improvement (PQI) in manufacturing industries. He has supervised more than 65 undergraduate and postgraduate research projects. He has served as a reviewer for a number of engineering management and computer science conferences and journals as part of his expertise sharing initiatives. He had published more than 150 International Proceedings and International Journals and 8 books. He is also President of Industrial Engineering and Operation Management Society (IEOMS, Malaysia), Council member of Management Science and Operation Research Society of Malaysia (MSORSM), member of International Association of Engineers (IAENG), member of Institute of Industrial Engineer (IIE), USA, member of International Institute of Forecasters (IIF), member of Technological Association of Malaysia (TAM) and associate member of Malaysian Institute of Management (AMIM).
Prof. Dr Mohammad Patwary
Director of Centre for Future Networks & Autonomous Systems
University of Wolverhampton, UK
Prof. Syed Akheel Ahmed, MSc. Ph.D.
Former Vice Chancellor, Yenepoya University
Icon Professor, University of Malaya, Malaysia
Dr. Nita H. Shah
Professor and Head of department of Mathematics
Department of Mathematics
Gujarat University, Navrangpura
Ahmedabad, Gujarat, India – 380009
Council member of Indian Mathematical Society
Advisory Committee
- Professor Dr. M.H.Khan, Former Vice Chancellor, BUET
- Professor Dr. Rafiqul Alam Beg,Former Vice Chancellor, RUET
- Professor Dr. AFM Anwarul Haque, Professor, AUST
- Professor Junichi Tamaki, Professor, Kitami-IT, Japan
- Professor Sharif Ullah,Professor, Kitami-IT, Japan
- Prof. Dr. Md. Rafiqul Islam Sheikh, Vice Chancellor, RUET
- Prof Dr M. Imtiaz Hossain, Former Vice Chancellor, IUT
- Dr. M.S. J. Hashmi, Professor Emeritus, DCU , Ireland
- Prof Dr. Abdur Razzaq Akhanda, Pro Vice Chancellor, SU
- Professor Md Khaled Khalil,DUET
- Professor Dr. A.K.M. Sadrul Islam, General Secretary, BSME
- Prof Dr M A Rashid Sarkar, MIST
- Professor Dr. Tajul Islam, CUET
- Professor Dr. AKM Nurul Amin,MIST
- Prof Abu Masud, Former Professor, Wichita University, USA
- Prof Abdur Rahim, University of New Brunswick, Canada
- Professor Dr. Abdullahil Azeem,BUET
- Prof. Dr. Mohammad Rofiqul Islam, RUET
- Prof. Peter Hasle, Southern Denmark University, Denmark
Technical Committee
- TBA
TOPICS
INDUSTRIAL AND PRODUCTION ENGINEERING
- CAD/CAM and Industry 4.0
- Computer Integrated Manufacturing
- Facility Planning, Layout Design and Material handling
- Micro and Nano Manufacturing
- Advance manufacturing process
- Industrial Robot and robotics
- Reliability and Maintenance Management/Engineering
- Supply Chain Management
- Management Information Systems
- Production planning and Control
- Operations Management
- Automation and Control Engineering
- Smart Materials and Composites
- Operations Research
- Simulations
- Artificial Intelligence
- Knowledgebase Engineering
- Concurrent Engineering
- Business and Innovation
- Industrial Safety and Green Manufacturing
- Occupational Health and Safety
- Instrumentation & Measurements
- Engineering Management
- Textile Technology and Readymade Garments Manufacturing
- Work Design & Measurement
- Engineering Economy
- Energy Management
- Quality Control and Management
- Ergonomics & Human Factors Engineering
- Product Design & Development
- Sustainability and Green System
- Energy, Environment and Innovation
- Technology Management
- Virtual Reality
ME SUBJECT AREAS:
- Fluid Mechanics and fluidics
- Compressible and incompressible Flow
- Aerodynamics
- Multiphase Flows
- Thermal Engineering
- Thermo-Fluid Mechanics
- Internal Combustion Engine
- Power Generation
- Energy, Renewable Energy and Biofuel
- Bio-Medical Engineering
- Heating and Ventilation
- Air conditioning and refrigeration
- Environmental Engineering
- Computational Fluid Dynamics
- Micro and Nano Design
- Automobile Engineering
Academic Affiliates / Industrial and Production Engineering Department Affiliate
- TBA
IEOM Student Chapters in Bangladesh
- Ahsanullah University of Science & Technology, Dhaka
- Bangladesh University of Engineering and Technology (BUET)
- BUTEX – Bangladesh University of Textiles
- International Islamic University of Chittagong (IIUC)
- Islamic University of Technology (IUT)
- Jessore University of Science and Technology (JUST)
- Khulna University
- Khulna University of Engineering and Technology (KUET)
- Military Institute of Science and Technology (MIST)
- Bangladesh Institute of Management (BIM)
- Rajshahi University
- Shah Jalal University of Science and Technology (SUST)
- University of Chittagong