Indonesia 2021
  • Home
  • Authors
  • Program
  • Registration
  • Committee
  • Competitions
    • Undergraduate Paper Competition
    • Graduate Paper Competition
    • Master Thesis Competition
    • Doctoral Dissertation Competition
    • Senior Design Project Competition
    • Undergraduate Research Competition
    • Human Factors and Ergonomics Competition
    • Lean Six Sigma Competition
    • Simulation Competition
    • Supply Chain Competition
    • COVID-19
    • Poster Competition
  • Keynote
  • Global Engineering Education
  • SCM
  • Industry 4.0
  • Panels
  • Sponsors
Home» Committee

Committee

Conference Committee

CONFERENCE CHAIRS:

Dr. Ir. Wahyudi Sutopo, ST., M.Si, IPM
Professor, Department of Industrial Engineering
Head of Industrial Engineering and Techno-Economics Research Group, Department of Industrial Engineering
Vice  Dean for Human Resources, Finance, and Logistics
Faculty of Engineering
Universitas Sebelas Maret  (UNS), Surakarta, Indonesia
President, IEOM Indonesia Chapter

Professor Don Reimer, IEOM Fellow
Director of Membership and Chapter Development – IEOM Society
President, The Small Business Strategy Group, Detroit, Michigan, USA
Adjunct Faculty – A. Leon Linton Department of Mechanical, Robotics and Industrial Engineering, Lawrence Technological University, Southfield, Michigan, USA

HONORARY CHAIRS

  • Prof. Dr. Kuncoro Diharjo, S.T., M.T., Vice Rector for Research and Innovation, Universitas Sebelas Maret  (UNS)
  • Dr. techn. Ir. Sholihin As’ad, M.T., Dean, Faculty of Engineering Universitas Sebelas Maret  (UNS)

PROGRAM CHAIRS

  • Dr. Muh. Hisjam, STP, MT, Department of Industrial Engineering, Universitas Sebelas Maret
  • Dwi Agustina Kurniawati, S.T., M.Eng., Ph.D, Department of Industrial Engineering, Universitas Islam Negeri Sunan Kalijaga, Yogyakarta, Indonesia
  • Dr. Anak Agung Sagung Manik Mahachandra Jayanthi Mertha, ST, MSc, Department of Industrial Engineering, Universitas Diponegoro, Semarang, Indonesia

TECHNICAL CHAIRS

  • Dr. Eng. Boby Kurniawan, ST, MT, Department of Industrial Engineering, Universitas Sultan Ageng Tirtayasa, Serang, Indonesia
  • Dr. Carles Sitompul, S.T., M.T., M.I.M., Department of Industrial Engineering, Universitas Parahyangan, Bandung, Indonesia

GLOBAL ENGINEERING EDUCATION CHAIR

  • Assoc. Prof. Dr Syed Ahmad Helmi Syed Hassan, Associate Fellow, Center for Engineering Education (CEE), Universiti Teknologi Malaysia

GLOBAL BUSINESS MANAGEMENT EDUCAITON CHAIR 

  • Dr. Imam Shofwan, Semarang State University, Indonesia

INDUSTRY SOLUTIONS CHAIRS

  • Dr. Ahmad Syamil, CFPIM, CIRM, CSCP, Dean of Binus Business School, Bina Nusantara University, Jakarta
  • Dr. Ir. Zaenal Muttaqien, SE., S.Pd., MT., IPM, AER, The board of industrial engineering chapter – the institute of Indonesian engineers (BKTI-PII), Department of Industrial Engineering, Universitas Jenderal Achmad Yani, Bandung, Indonesia
  • Dr. Basuki Rahmad, ST, MT, CEO – PT. Transforma Engineering & Solutions, Telkom University, Bandung, Indonesia

WOMEN IN INDUSTRY AND ACADEMIA CHAIRS

  • Dr. Ir. Tiena G. Amran, IPU, AER, The board of industrial engineering chapter – the institute of Indonesian engineers (BKTI-PII), Department of Industrial Engineering, Universitas Trisaksi, Jakarta, Indonesia
  • Prof. Nilda Tri Putri, S.T.,M.T., Ph.D, Deparment of Industrial Engineering, Universitas Andalas, Padang, Indonesia

PUBLICATION CHAIRS

  • Lina Gozali,  S.T., M.M., Ph.D., Department of Industrial Engineering, Universitas Tarumanegara, Jakarta, Indonesia
  • Mohammad Mi’radj Isnaini, S.T., M.T., Ph.D., Department of  Industrial Engineering, Institut Teknologi Bandung (ITB), Bandung, Indonesia
  • Dr. Mohammed Rahman, Central Connecticut State University, USA

SPONSORS AND EXHIBITORS CHAIR

  • Professor Don Reimer, Lawrence Technological University, Southfield, Michigan, USA
  • Dr. Naniek Utami Handayani, S.Si, MT, Department of Industrial Engineering, Universitas Diponegoro, Semarang, Indonesia

COMPETITIONS CHAIRS

Undergraduate Student Paper Competition Sponsored by SIEMENS

  • Eko Setiawan, ST, MT, Ph.D., Head of Industrial Engineering Study Programme, Universitas Muhammadiyah Surakarta, Indonesia
  • Dr. Ratna Purwaningsih, ST., MT., Head of Industrial Engineering Department, Universitas Diponegoro, Semarang, Indonesia

Graduate Student Paper Competition Sponsored by EATON Corporation

  • Dr. Eng. Desto Jumeno, ST, MT, Head of Master Program in Industrial Engineering, Universitas Andalas, Padang, Indonesia

Master Thesis Competition Chairs

  • Dr. Eko Pujiyanto, S.Si, MT, Head of Master Program in Industrial Engineering, Universitas Sebelas Maret, Surakarta, Indonesia
  • Dr. Jafri Mohd. Rohani, University of Technology, Malaysia

Doctoral Dissertation Competition Chairs

  • Nur Aini Masruroh, ST., M.Sc., Ph.D, Department of Industrial Engineering, Universitas Gadjah Mada (UGM), Yogyakarta, Indonesia
  • Dr. Mehran Doulat, Center for Quality and Sustainability, School of Engineering and Advanced Technology, UTM Kuala Lumpur, Malaysia

Senior Capstone Design Project / FYP Poster Competition Chairs

  • Fitra Lestari, Ph.D., Head of Industrial Engineering Study Programme, UIN Sultan Syarif Kasim, Indonesia
  • Dr. M. Shamsuzzaman, University of Sharjah, UAE

Undergraduate Research Competition Chairs

  • Dr. Eko Liquiddanu, ST, MT, Head of Industrial Engineering Study Programme, Universitas Sebelas Maret, Surakarta, Indonesia
  • Dr. Singgih Saptadi, ST., MT, Head of Industrial Engineering Study Programme, Universitas Diponegoro, Semarang, Indonesia

Lean Six Sigma Competition Chairs

  • Dr. Dra. Hennie Husniah, M.T., Dean,  Faculty of Engineering, Langlangbuana University, Bandung, Indonesia
  • Dr. Dra. Amelia Santoso M.T., Head of Master Program in Industrial Engineering, Universitas Surabaya, Surabaya, Indonesia
  • Assoc. Prof. Dr. Adnan Hassan, University of Technology, Malaysia

Simulation Competition Chairs

  • Nurhadi Siswanto, S.T., MSIE., Ph.D, Institut Teknologi Sepuluh November (ITS), Surabaya, Indonesia
  • Dr. Rohaizan Ramlan, Universiti Tun Hussein Onn Malaysia

Supply Chain and Logistics Competition Chairs

  • Dr. Eng. Erwin Widodo, ST, M. Eng, Institut Teknologi Sepuluh November (ITS), Surabaya, Indonesia
  • Dr. Azanizawati Ma’aram;  Universiti Teknologi Malaysia

Human Factors and Ergonomics Competition

  • Ing. Novie Susanto, S.T., M.Eng, Department of Industrial Engineering, Universitas Diponegoro

Poster Competition Chairs

  • Dr. Indri Hapsari, S.T., M.T., Head of Industrial Engineering Study Programme, Universitas Surabaya, Surabaya, Indonesia
  • Dr. Henny, ST., M.T., Head of Industrial Engineering Study Programme, Universitas Komputer Indonesia, Bandung, Indonesia

REGIONAL ACADEMIC COMMITTEE

  • Prof. Dr. Bambang Suhardi, S.T.,M.T., Department of Industrial Engineering, Universitas Sebelas Maret, (Chair)
  • Dr. Eng. R.B. Seno Wulung, Politeknik ATK Yogyakarta, Indonesia,
  • Dr. Anugerah Widiyanto, B.Sc., M.Eng, Agency for the Assessment and Application of Technology, Serpong, Indonesia,
  • Dr. Docki Saraswati, Industrial Engineering, Universitas Trisakti, Jakarta, Indonesia,
  • Dr. Dwi Kurniawan, ST, MT, Department of Industrial Engineering, Institut Teknologi Nasional, Bandung, Indonesia,
  • Dr. Ellysa Nursanti, ST, MT, Institut Teknologi Nasional, Malang, Indonesia,
  • Dr. Eng Cahyono Sigit Pramudyo, M.T, Department of Industrial Engineering, Universitas Islam Negeri Sunan Kalijaga, Yogyakarta, Indonesia,
  • Dr. Eng. Muhammad Rusman, Head of Industrial Engineering Department, Hasanuddin University, Makassar, South Sulawesi, Indonesia,
  • Dr. Evizal Abdul kadir ST, M.Eng, Universitas Islam Riau, Pekan Baru, Indonesia,
  • Dr. Gede Agus Widyadana, Industrial Engineering Department, Petra Christian University, Surabaya, Indonesia,
  • Dr. Hari-Agung Yuniarto, Researcher in Maintenance and Quality System Engineering, Universitas Gadjah Mada (UGM), Yogyakarta, Indonesia,
  • Dr. Ho Hwi Chie, Dean, Binus Aso School of Engineering, Bina Nusantara University (Binus), Tangerang, Banten, Indonesia,
  • Dr. -Ing. Amalia Suzianti S.T., M.Sc.; Department of Industrial Engineering, Universitas Indonesia,
  • Dr. Ir. R. Hari Setyanto, M.Si,  Department of Industrial Engineering, Universitas Sebelas Maret
  • Dr. Ishardita Pambudi Tama, Head of Industrial Engineering Department, Universitas Brawijaya, Malang, Indonesia,
  • Dr. Lobes Herdiman, ST., MT, Department of Industrial Engineering, Universitas Sebelas Maret
  • Dr. Mustofa, ST, MT, Politeknik STMI Jakarta, Indonesia,
  • Dr. Paulina Kus Ariningsih, Industrial Engineering Department, Faculty of Industrial Technology, Parahyangan Catholic University (UNPAR), Bandung, West Java, Indonesia ,
  • Dr. Rina Fitriana,ST,MM,IPM, Department of Industrial Engineering, Universitas Trisakti, Indonesia
  • Dr. Sawarni Hasibuan, School of Industrial Engineering, Mercu Buana University, West Java, Indonesia,
  • Dr. Subagyo, Associate Professor, Mechanical & Industrial Engineering Department, Universitas Gadjah Mada, Yogyakarta, Indonesia,
  • Dr. Sugiono, Universitas Brawijaya, Kota Malang, Jawa Timur, Indonesia,
  • Hari Prasetyo, Ph.D; Department of Industrial Engineering, Universitas Muhammadiyah Surakarta, Indonesia,
  • Prof. Dr. Sudradjat Supian, Dean of Faculty of Mathematics and Natural Sciences (FMIPA), Universitas Padjadjaran, West Java, Indonesia,
  • Prof. Ir. Moses Laksono Singgih M.Sc Ph.D, Institut Teknologi Sepuluh November (ITS), Surabaya, Indonesia,
  • Winda Nur Cahya, S.T., M.Sc., Ph.D, Head of Magister Industrial Engineering, Universitas Islam Indonesia, Yogyakarta, Indonesia,
  • Dr. Jupriyanto, ST, MT, IPU, Defense Industry Study Program, Indonesia Defence University,
  • Gusti Fauza, S.T., M.T., Ph.D., Food Technology Study Program, Universitas Sebelas Maret, Indonesia
  • Dr. Ir. Endah Retno Dyartanti, M.T., University Centre of Excellence for Electrical Energy Storage Technology, Universitas Sebelas Maret, Surakarta, Indonesia

HONORARY COMMITTEE

  1. Prof. Dr. Kuncoro Diharjo, S.T., M.T., Vice Rector for Research and Innovation, Universitas Sebelas Maret, (Chair),
  2. Dr.techn.Ir. Sholihin As’ad, M.T., Dean, Faculty of Engineering Universitas Sebelas Maret
  3. Professor Dr. Ir. Susy Susmartini, MSIE, Department of Industrial Engineering, Universitas Sebelas Maret (UNS),
  4. Professor Dr. Eng. Agus Purwanto, S.T., M.T. , Universitas Sebelas Maret, Surakarta Indonesia,
  5. Professor Dr. Ir. Abdul Hakim Halim, M. Eng, Department of Industrial Engineering, Institut Teknologi Bandung (ITB), Bandung, Indonesia,
  6. Professor Dr. Ir. Budisantoso Wirjodirdjo, Institut Teknologi Sepuluh November (ITS), Surabaya, Indonesia,
  7. Professor Dr. Ir. Sukaria Sinulingga, M. Eng, Department of  Industrial Engineering Universitas Sumatera Utara, Medan, Indonesia,
  8. Professor Dr. Ir. Yuri M. Zagloel, M.Sc. Eng, Department of Industrial Engineering, Universitas Indonesia, Jakarta, Indonesia,
  9. Professor Dr. Mohd Razali Muhamad, Deputy Vice Chancellor (Academic and Internationalization), Universiti Teknikal Malaysia Melaka,
  10. Professor Dr. Norazman Mohamad Nor, Deputy Vice Chancellor (Research and Innovation), National Defence University of Malaysia in Kuala Lumpur,
  11. Professor Ir. Joniarto Parung, M.MBA.T., Ph.D., IPU, Universitas Surabaya
  12. Professor Muhammad Nizam, S.T., M.T., Ph.D., Universitas Sebelas Maret, Surakarta Indonesia,
  13. Professor Dr. Aries Susanty, ST, MT, Department of Industrial Engineering, Universitas Diponegoro, Semarang, Indonesia,
  14. Prof.Dr. Mohd. Hasbullah bin Hj. Idris, Chair of School Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia,

ADVISORY COMMITTEE

  1. Professor Dody Ariawan, S.T., M.T., Ph.D., Vice Dean for Deputy Dean for Academic, Research and Student Affairs, Faculty of Engineering, Universitas Sebelas Maret, (Chair)
  2. Professor Dr. Cucuk Nur Rosyidi, S.T., M.T., Department of Industrial Engineering, Universitas Sebelas Maret,
  3. Dr. Muhammad Abid, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Pakistan,
  4. Dr. Olufemi Adetunji, University of Pretoria, South Africa,
  5. Dr. Umar AL-Turki, King Fahd University of Petroleum and Minerals, Saudi Arabia,
  6. Dr. Ronald G. Askin, Arizona State University, USA,
  7. Dr. Mohammed Ben-Daya, King Fahd University of Petroleum and Minerals, Saudi Arabia
  8. Dr. Abdul Talib Bon, Universiti Tun Hussein Onn, Malaysia,
  9. Dr. Raj Das, University of Auckland, New Zealand,
  10. Dr. Kudret Demirli, Khalifa University, Abu Dhabi, UAE,
  11. Dr. Jose Arturo Garza-Reyes, University of Derby, UK,
  12. Dr. Alireza Ghasemi, Dalhousie University, Halifax, NS, Canada,
  13. Dr. Moncer Abdelhamid Hariga, American University of Sharjah, United Arab Emirates
  14. Dr. Mohammad D. Al-Tahat, The University of Jordan, Amman, Jordan,
  15. Dr. Arun Kumar, Royal Melbourne Institute of Technology (RMIT) University, Australia
  16. Dr. Jay Lee, University of Cincinnati, USA,
  17. Dr. Abu Masud, Wichita State University, Kansas, USA,
  18. Dr. Charles Mbohwa, University of Johannesburg, South Africa,
  19. Dr. Samar Mukhopadhyay, UWM, Milwauee, WI, USA
  20. Dr. Nor Hasni Osman, Universiti Utara Malaysia,
  21. Dr. Leonard Perry, University of San Diego, USA,
  22. Dr. Ho Thanh Phong, International University – VNUHCM, Vietnam,
  23. Dr. Yassine Ouazene, University of Technology of Troyes, France,
  24. Dr. Abdur Rahim, University of New Brunswick, Canada,
  25. Dr. Mehmet Savsar, Kuwait University, Safat, Kuwait,
  26. Dr. Rapinder Sawhney, University of Tennessee – Knoxville, USA,
  27. Dr. Rosemary Seva, De La Salle University – Manila, Philippines,
  28. Dr. Devdas Shetty, University of Hartford, Connecticut, USA,
  29. Dr. Hamid Seifoddini, University of Wisconsin-Milwaukee, USA,
  30. Dr. Masine Md. Tap, Universiti Teknologi Malaysia,
  31. Dr. Zulkifli Mohamed Udin, Universiti Utara Malaysia,
  32. Dr. Alok Verma, Old Dominion University, Norfolk, Virginia, USA,
  33. Dr. Venkata Seshachala Sarma Yadavalli, University of Pretoria, South Africa,
  34. Dr. Hari Agung Yuniarto, Universitas Gadjah Mada, Indonesia
  35. Dr. Li Zheng, Tsinghua University, China,
  36. Dr. Henk Zijm, Dutch Institute for Advanced Logistics, University of Twente, Netherlands
  37. Dr. Devashis Mitra, Dean – Faculty of Business Administration, University of New Brunswick, Fredericton, Canada.
  38. Dr. Hamidi Bashir, Chairperson, Department of Industrial and Engineering Management, University of Sharjah, UAE,
  39. Dr. Hesham Kamal Al-Fares, King Fahd University of Petroleum and Minerals, Saudi Arabia,
  40. Dr. Khaled S. Al-Sultan, King Fahd University of Petroleum and Minerals, Saudi Arabia,
  41. Dr. Mohamed Essaaidi, Professor and Director (Dean), ENSIAS College of Engineering – Mohamed V University in Rabat, Morocco,
  42. Ir. Lim Chye Ing, PhD, MSc, BEng, PEng, MIEM, PMP, Curtin University, Malaysia,
  43. Dr. Ir. H. A. Dirgahayu Lantara, MT, IPU, Department of Industrial Engineering, Universitas Muslim Indonesia, Makassar, Indonesia,
  44. Dr. Heri Setiawan, S.T., M.T., Department of Industrial Engineering, Universitas Katolik Musi Charitas
  45. Dr. Ir. Eduart Wolok, ST, MT, Department of Industrial Engineering, Universitas Negeri Gorontalo, Indonesia,
  46. Professor Dr. Noordin Mohd. Yusof,Faculty of Mechanical Engineering, Universiti Teknologi Malaysia

GLOBAL ENGINEERING EDUCATION COMMITTEE

  1. Assoc. Prof. Dr Syed Ahmad Helmi Syed Hassan, Associate Fellow, Center for Engineering Education (CEE), Universiti Teknologi Malaysia (Chair),
  2. Dr. Abu Masud, Wichita State University, Kansas, USA (Co-Chair),
  3. Dr. Hamid Parsaei, Texas A&M University (College Station) and Texas A&M University, Qatar (Co-Chair),
  4. Dr. Jafri Mohd Rohani, Universiti Teknologi Malaysia,
  5. Dr. Grace Kanakana of Tshwane University of Technology, Pretoria, South Africa,
  6. Dr. Achmad Basuki, ST., MT, Civil Engineering Department, Universitas Sebelas Maret,
  7. Dr. Yosafat Winarto, ST, MT, Architecture Department, Universitas Sebelas Maret,
  8. Dr. Muh. Hisjam, STP, MT, Industrial Engineeng Department, Universitas Sebelas Maret,
  9. Fitrian Imaduddin, S.T., M.Sc., Ph.D, Mechanidal Engineering Department, Univesitas Sebelas Maret
  10. Dr. Joko Waluyo, ST., MT, Chemical Engineering Department, Universitas Sebelas Maret,
  11. RR. Ratri Werdiningtyas, S.T., M.T., Ph.D, Regional Urban Planinning Department, Universitas Sebelas Maret,
  12. Dr. Eng Faisal Rahutomo, ST., M.Kom. Electrical Engineering Department, Universitas Sebelas Maret

PROGRAM COMMITTEE

  1. Dr. Ahad Ali, Director, Bachelor of Science in Industrial Engineering (BSIE); Director, Master of Science in Industrial Engineering (MSIE); Director, Smart Manufacturing and Lean Systems Research Group (Chair),
  2. Dr. Eng. Boby Kurniawan, ST, MT, Department of Industrial Engineering, Universitas Sultan Ageng Tirtayasa, Serang, Indonesia,
  3. Dr. Carles Sitompul, S.T., M.T., M.I.M., Department of Industrial Engineering, Universitas Parahyangan, Bandung, Indonesia,
  4. Dr. Dwi Kurniawan, ST, MT, Department of Industrial Engineering, Institut Teknologi Nasional, Bandung, Indonesia,
  5. Dr. M. Khadem, Sultan Qaboos University, Muscat, Oman,
  6. Dr. Abdul Talib Bon, Universiti Tun Hussein Onn Malaysia
  7. Dr. Rushan Ziatdinov, Department of Industrial & Management Engineering, Keimyung University, Daegu, South Korea,
  8. Dr. Lina Aboueljinane, Industrial Engineering Program, École Nationale Supérieure des Mines de Rabat (ENSMR), Morocco,
  9. Dr. Bouloiz Hafida, Industrial Engineering Department, National School of Applied Sciences (ENSA), Ibn Zohr University, Agadir, Morocco,
  10. Dr. Jaouad Boukachour, Université Le Havre, France.
  11. Dr. Denni Kurniawan, Universiti Teknologi Brunei, Brunei Darussalam
  12. Dr. Norizah Bt Hj Redzuan, PhD, Universiti Teknologi Malaysia, Malaysia

Industry Solutions Committee

  1. Dr. Ahmad Syamil, CFPIM, CIRM, CSCP, Dean of Binus Business School, Bina Nusantara University, Jakarta,
  2. Dr. Ir. Zaenal Muttaqien, SE., S.Pd., MT., IPM, AER, The board of industrial engineering chapter – the institute of Indonesian engineers (BKTI-PII), Department of Industrial Engineering, Universitas Jenderal Achmad Yani, Bandung, Indonesia,
  3. Dr. Basuki Rahmad, ST, MT, CEO – PT. Transforma Engineering & Solutions; Telkom University, Bandung, Indonesia,
  4. Dr. Anwar Hossain, Daikin Applied, Minneapolis, Minnesota, USA,
  5. Ihfasuziella Ibrahim, Construction Research Institute of Malaysia (CREAM)
  6. German Moya, President at IEEE Costa Rica Section, Costa Rica,
  7. Rina Wiji Astuti , ST, MT, CEO – PT. Batex Energi Mandiri, Surakarta, Indonesia
  8. Dr. Susanto Sudiro, PT Mega Andalan Kalasan, Yogyakarta, Indonesia.

Women in Industry and Academia (WIIA) Committee

  1. Prof. Nilda Tri Putri, S.T.,M.T.,Ph.D, Deparment of Industrial Engineering, Universitas Andalas, Padang, Indonesia,
  2. Dr. Ir. Tiena G. Amran, IPU, AER, The board of industrial engineering chapter – the institute of Indonesian engineers (BKTI-PII), Department of Industrial Engineering, Universitas Trisaksi, Jakarta, Indonesia,
  3. Dr. Adibah Shuib, Faculty of Computer and Mathematical Sciences, Universiti Teknologi MARA, Malaysia,
  4. Dr. Chan Chee-Ming, Associate Professor and Deputy Dean (Academic and Research), Universiti Tun Hussein Onn Malaysia,
  5. Dr. Ellysa Nursanti, ST, MT, Institut Teknologi Nasional, Malang, Indonesia,
  6. Dr. Funda Sivrikaya Şerifoğlu, Bilgi University, Istanbul, Turkey,
  7. Dr. Ilham Kissani, Faulty of Engineering & Management Science, Al Akhawayn University, Ifrane, Morocco,
  8. Dr. Mey Goh, Assoc Professor in Product Design, Loughborough University, UK,
  9. Dr. Naniek Utami Handayani, S.Si, MT, Department of Industrial Engineering, Universitas Diponegoro, Semarang, Indonesia
  10. Dr. Vanajah Siva, Chalmers University, Sweden,
  11. Ir. Bertha Maya Sopha, S.T., M.Sc., Ph.D., IPM, ASEAN Eng., Universitas Gadjah Mada (UGM), Yogyakarta, Indonesia,
  12. Prof. Soumaya Yacout, École Polytechnique de Montréal, Canada,

TECHNICAL COMMITTEE / REVIEWERS

  • Dr. Javad Khamisabadi, Islamic Azad University, Tehran, Iran,
  • Dr. A.O. Adewumi, University of KwaZulu-Natal, South Africa,
  • Dr. Abdelaziz Berrado, The Ecole Mohammadia d’Ingénieurs (EMI), Rabat, Morocco
  • Dr. Aidin Delgoshaei, Industrial Engineering Department, Kharazmi University, Tehran, Iran
  • Dr. Abderrahmane Mellak, University of Boumerdes, Algeria,
  • Dr. Abdollah Aghaie, K.N. Toosi University of Technology, Iran,
  • Dr. Abdul-Rahman Al-Ali, American University of Sharjah, United Arab Emirates,
  • Dr. Abdussalam Shibani, Coventry University, UK,
  • Dr. Ahmed Kadhim Hussein, Babylon University, Iraq,
  • Dr. Amir Azizi, Universiti Malaysia Pahang, Malaysia,
  • Dr. Andi Cakravastia, ST, MT, Institut Teknologi Bandung, Indonesia,
  • Dr. Anwar, Universitas Malikussaleh, Aceh, Indonesia,
  • Dr. Arun N. Nambiar, California State University – Fresno, USA,
  • Dr. Balan Sundarakani, University of Wollongong in Dubai, UAE,
  • Dr. Behnam Bahrami, Eastern Mediterranean University, Famagusta, Cyprus,
  • Dr. Bhuvenesh Rajamony, University Malaysia Perlis (UniMAP), Malaysia,
  • Dr. Brigitte Jaumard, Concordia University, Canada,
  • Dr. Carles Sitompul, S.T., M.T., M.I.M., Universitas Parahyangan, Bandung, Indonesia.
  • Dr. Cecilia Nembou, Divine Word University, Papua New Guinea,
  • Dr. Faieza Abdul Aziz, Universiti Putra Malaysia, Selangor, Malaysia,
  • Dr. Fernando González Aleu, Departamento de Ingeniería, Universidad de Monterrey, Mexico,
  • Dr. Francis Leung, City University of Hong Kong, China,
  • Dr. Fulufhelo Masithulela, University of South Africa, Johannesburg, South Africa,
  • Dr. Gopalan Srinivasan, University of New Brunswick, Canada,
  • Dr. Haider Ali Biswas, Khulna University, Bangladesh,
  • Dr. Hui-Ming Wee, Chung Yuan Christian University, Taiwan,
  • Dr. Indra Gunawan, The University of Adelaide, Australia,
  • Dr. Ing. Novie Susanto,ST, M. Eng, Universitas Diponegoro, Indonesia,
  • Dr. Ir. Rakhma Oktavina, MT, Universitas Gunadarma,
  • Dr. Ir. Rosnani Ginting, MT, Universitas Sumatera Utara, Medan, Indonesia,
  • Dr. Jahara bint Ghani, UKM, Malaysia,
  • Dr. Jayakanth Srinivasan, MIT Sloan School of Management,
  • Dr. Kannan Govindan, University of Southern Denmark, Denmark,
  • Dr. Kondo H. Adjallah, Paul-Verlaine University, France
  • Dr. Lamto Widodo, ST., MT, Universitas Tarumanegara, Jakarta, Indonesia
  • Dr. Linda L. Zhang, IESEG School of Management, Lille-Paris, France,
  • Dr. Mahdi Bashiri, Shahed University, Iran
  • Dr. Mahmood Shafiee, Cranfield University, Bedfordshire, United Kingdom
  • Dr. Maruf Hasan, University of New South Wales, Australia
  • Dr. Md. Abdus Samad Kamal, Gunma University, Kiryu, Japan
  • Dr. Md. Mamun Habib, Independent University, Bangladesh
  • Dr. Md. Mizanur Rahman, Universiti Malaysia Sabah (UMS), Kota Kinabalu, Sabah, Malaysia,
  • Dr. Mehran Doulat, Center for Quality and Sustainability, School of Engineering and Advanced Technology, UTM Kuala Lumpur, Malaysia,
  • Dr. Meilita Tryana Sembiring, ST, MT, Universitas Sumatera Utara, Medan, Indonesia
  • Dr. Michael Mutingi, University of Botswana, Botswana
  • Dr. Miguel Sanz Bobi, Comillas Pontifical University, Spain
  • Dr. Mohammad Ishak Desa, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
  • Dr. Mohd Abdur Rashid, University Malaysia Perlis (UniMAP), Malaysia,
  • Dr. Murat Caner Testik, Hacettepe University, Ankara, Turkey,
  • Dr. Nani Kurniati, Institute of Technology Sepuluh Nopember (ITS), Surabaya, East Java, Indonesia
  • Dr. Naniek Utami Handayani, S.Si, MT, Universitas Diponegoro, Semarang, Indonesia.
  • Dr. Nejib Chouaibi, Polytechnic School of Tunisia, Tunisia,
  • Dr. Norhamidi Muhamad, UKM, Malaysia,
  • Dr. Norzaidahwati Zaidin, Universiti Teknologi Malaysia, Johor, Malaysia,
  • Dr. Nubia Milena Velasco Rodriguez, Universidad de Los Andes, Colombia,
  • Dr. Omar Elmabrouk, Benghazi University, Libya,
  • Dr. P. Sanjeevikumar, CTiF Global Capsule, Aarhus University, Denmark
  • Dr. Raja Kothandaraman, Alpha College of Engineering, Chennai, Tamilnadu, India,
  • Dr. Raja Zuraidah Raja Mohd Rasi, Universiti Tun Hussein Onn Malaysia,
  • Dr. Ramy Harik, University of South Carolina, USA,
  • Dr. Rashmi Jha, Gitarattan International Business School (GIBS), Affiliated to Guru Gobind Singh Indraprastha University, New Delhi, India.
  • Dr. Ratri Parida, National Institute of Construction Management and Research (NICMAR), Pune, Maharashtra, India,
  • Dr. Ravi Gor, St. Kabir Institute of Professional Studies, Ahmedabad, India,
  • Dr. Rina Fitriana,ST,MM,IPM, Department of Industrial Engineering, Universitas Trisakti, Indonesia
  • Dr. Rodrigo Garrido, Universidad Adolfo Ibaez, Chile,
  • Dr. Ruchi Mishra, Institute of Management, Nirma University, Ahmedabad, India,
  • Dr. Salah Haridy, Department of Industrial Engineering and Engineering Management, University of Sharjah, Sharjah, UAE,
  • Dr. Sarbjit Singh, National Institute of Technology, Jalandhar, Punjab, India,
  • Dr. Sawat Pararach, Thammasat University, Thailand,
  • Dr. Shahrul B. Kamaruddin, Universiti Sains Malaysia,
  • Dr. Shahryar Sorooshian, University Malaysia Pahang, Malaysia,
  • Dr. Suat Kasap, Industrial Engineering, American University of the Middle East, Kuwait,
  • Dr. Suhaiza Hanim Zailani,University Malaya, Malaysia,
  • Dr. Syed Asif Raza, Qatar University, Qatar,
  • Dr. T. Ramayah, School of Management, Universiti Sains Malaysia,
  • Dr. Tanika D Sofianti, Industrial Engineering Dept., Engineering Faculty, Swiss German University BSD City Kav. Tangerang, Banten, Indonesia,
  • Dr. Theodore B. Trafalis, University of Oklahoma, USA,
  • Dr. Titah Yudhistira, ST, MT, Institut Teknologi Bandung, Indonesia,
  • Dr. Vassilis Gerogiannis, Department of Project Management, Greece
  • Dr. Vladimir Beresnev, Sobolev Institute of Mathematics, Russia
  • Dr. Vladimir I. Tsurkov, Russian Academy of Sciences, Moscow, Russia,
  • Dr. Vladimir Modrak, TUKE, Slovakia
  • Dr. Yong Yin, Yamagata University, Japan
  • Dr. Yosi Agustina Hidayat, ST, MT, Institut Teknologi Bandung, Indonesia
  • Dr. Yuan Xue Ming, SIMTech: Singapore Institute of Manufacturing Technology, Singapore
  • Dr. Zuraidah Sulaiman, Universiti Teknologi Malaysia (UTM), Johor, Malaysia
  • Dr. D. K. Banwet, IIT-Delhi, India
  • Eko Setiawan, ST, MT, Ph.D, Universitas Muhammadiyah Surakarta,
  • Jonrinaldi, ST, MT, Ph.D, Universitas Andalas, Padang, Indonesia,
  • Markus Hartono, S.T., M.Sc., Ph.D, CHFP, Universitas Surabaya, Indonesia
  • Nurhadi Siswanto, S.T., MSIE., Ph.D, Institut Teknologi Sepuluh November, Surabaya, Indonesia
  • Prof. Dr. Anand Kumar, M.S. Engineering College, Bangalore Karnataka, India
  • Dr. Taufiq Immawan, S.T., M.M., Department of Industrial Engineering, Universitas Islam Indonesia, Yogyakarta, Indonesia
  • Dr. Ir. Halim Mahfud, M.Sc, Department of Industrial Engineering, UPN Veteraran Jakarta, Indonesia
  • Yun Arifatul Fatimah, M.T., Ph.D., Department of Industrial Engineering, Universitas Muhammadiyah Magelang, Indonesia, Yogyakarta, Indonesia
  • Andi Sudiarso, S.T., M.T., M.Sc., Ph.D. Universitas Gadjah Mada (UGM), Yogyakarta, Indonesia
  • Dr. Arian Dhini, ST, MT., Department of Industrial Engineering Universitas Indonesia
  • Dr.Eng. Ir. Irma Nur Afiah, ST.,MT.,IPM.,ASEAN Eng. Department of Industrial Engineering, Universitas Muslim Indonesia, Makassar, Indonesia
  • Dr. Wahyuda, ST, MT, Department of Industrial Engineering, Universitas Mulawarman
  • Dr. Ir. Adrian Nur, S.T., M.T., University Centre of Excellence for Electrical Energy Storage Technology, Universitas Sebelas Maret, Surakarta, Indonesia
  • Dr. Eng. Hendri Widyandari, S.Si., M.Si., University Centre of Excellence for Electrical Energy Storage Technology, Universitas Sebelas Maret, Surakarta, Indonesia
  • Retno Tanding Suryandari, Ph.D., Master in Management (MM) Study Program, Universitas Sebelas Maret, Surakarta, Indonesia
  • Didiek Sri Wiyono, ST, MT, Ph.D, Department Computer Science, Universitas Sebelas Maret, Surakarta, Indonesia
  • Dr. Fethma M Nor, Department of Mechanical Engineering, Curtin University, Malaysia
  • Assoc. Prof. Ts. Dr. Muhammad Azizi Mat Yajid, Director (Materials,Manufacturing & Industrial Engineering, Universiti Teknologi Malaysia, Malaysia
  • Dr. Auditya Purwandini Sutarto, S.T., M.Si., Department of Industrial Engineering, University of Qomaruddin Gresik, Indonesia
  • Dr. Leo Aldianto MBA,MSAE , School of Business and Management, Institut Teknologi Bandung, Indonesia
  • Abroon Qazi, Ph.D., Fellow Society of Actuaries | Chartered Enterprise Risk Analyst, Assistant Professor, Department of Marketing & Information Systems, School of Business Administration (AACSB accredited), American University of Sharjah, PO Box 26666, Sharjah, United Arab Emirates

TRACK CHAIRS

Artificial Intelligence

  • Winda Nur Cahya, S.T., M.Sc., Ph.D, Head of Magister Industrial Engineering, Universitas Islam Indonesia
  • Dr. Mohd Helmy Abd Wahab, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor, Malaysia

Automation and Control

  • Dr. Evizal Abdul kadir ST, M.Eng, Universitas Islam Riau, Pekan Baru, Indonesia
  • Dr. Rajab Abdullah Hokoma, University of Tripoli, Libya

Business Management

  • Retno Tanding Suryandari, Ph.D., Master in Management (MM) Study Program, Universitas Sebelas Maret, Surakarta, Indonesia
  • Dr. Sawarni Hasibuan, School of Industrial Engineering, Mercu Buana University, West Java, Indonesia,
  • Dr. Shekar Babu, AMRITA School of Business, Bangalore, India

Case Studies

  • Dr. Norizah Bt Hj Redzuan, PhD, Universiti Teknologi Malaysia, Malaysia
  • Dr. Javad Feizabadi, MIT Global SCALE Network in Asia- Malaysia Institute for Supply Chain Innovation

Cyber Security

  • Dr. Tanika Dewi Sofianti, S.T., M.T., Swiss German University, Tanggarang,  Indonesia

Computers and Computing

  • Prof. Dr. Anand Kumar, M.S. Engineering College, Bangalore Karnataka, India

Construction Management

  • Hossam Hassaan, University of Alexandria, Alexandria, Egypt

Data Analytics

  • Dr. Norzaidahwati Zaidin, Univeristy Technology Malaysia (UTM)

Decision Sciences

  • Nur Aini Masruroh, ST., M.Sc., Ph.D,  Department of Industrial Engineering, Universitas Gadjah Mada (UGM), Yogyakarta, Indonesia,
  • Dr. Samrad Jafarian-Namin, Industrial Engineering Department, Yazd University, Yazd, Iran

Defense Management Science

  • Dr. Jupriyanto, ST, MT, IPU, Defense Industry Study Program, Indonesia Defence University,
  • Mejar Wong Wai Loong, National Defence University of Malaysia

E-Business and E-Commerce

  • Didiek Sri Wiyono, ST, MT, Ph.D, Department Computer Science,  Universitas Sebelas Maret, Surakarta, Indonesia
  • Dr. Christoph Wunck, Jade University, Wilhelmshaven, Germany

Energy

  • Dr. Lamto Widodo, ST., MT, Universitas Tarumanegara, Jakarta, Indonesia,
  • Dr. Md. Mizanur Rahman, University Technology Malaysia (UTM), Johor Bahru, Malaysia
  • Dr. Ir. Endah Retno Dyartanti, M.T., Universitas Sebelas Maret, Surakarta, Indonesia,

Engineering Economy

  • Dr. Ali Mostafaeipour, Yazd University, Yazd, Iran

Engineering Education

  • Dr. Chee-Ming Chan, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor, Malaysia
  • Dr. Peter Toth, Trefort Agoston Centre for Engineering Education. Obuda University, Hungary

Engineering Management

  • Dr. Taufiq Immawan, S.T., M.M., Department of  Industrial Engineering, Universitas Islam Indonesia, Yogyakarta, Indonesia
  • Dr. Mehran Doulat. University of Wollongong, Wollongong, NSW, Australia

Entrepreneurship and Innovation

  • Dr. Anugerah Widiyanto, B.Sc., M.Eng, Agency for the Assessment and Application of Technology, Serpong, Indonesia,
  • Dr. Indra Gunawan, The University of Adelaide, Australia,

Facilities Planning and Management

  • Dr. Zeki Ayağ, Kadir Has University, Turkey,
  • Dr. Dra. Amelia Santoso M.T.. Head of Master Program in Industrial Engineering, Universitas Surabaya, Surabaya, Indonesia

Financial Engineering

  • Dr. Titah Yudhistira, ST, MT, Institut Teknologi Bandung, Indonesia,
  • Dr. Kamilah Ahmad, Universiti Tun Hussein Onn Malaysia
  • S.M. Tofayel Ahmad, Bangladesh Bank, Motijheel, Dhaka, Bangladesh

Healthcare Systems

  • Dr. Farzad Firouzi Jahantigh, Department of Industrial Engineering, Faculty of Engineering, University of Sistan and Baluchistan, Zahedan, Iran

Human Factors and Ergonomics

  • Dr. Ing. Novie Susanto,ST, M. Eng, Department of Industrial Engineering, Universitas Diponegoro,
  • Dr. Auditya Purwandini Sutarto, S.T., M.Si., Department of Industrial Engineering, University of Qomaruddin Gresik, Indonesia

IE / OM in Asia

  • Ir.  Bertha Maya Sopha, S.T., M.Sc., Ph.D., IPM, ASEAN Eng., The Indonesian Association of Industrial Engineering Higher Education Institution, FY 2020-2023
  • Assoc. Prof. Dr. Adnan Hassan, University of Technology, Malaysia

Information Technology and Information Systems

  • Dr. Azizah Yusof, Department of Educational Technology and Creative Multimedia, University Technology Malaysia (UTM), Johor Bahru, Malaysia

Inventory Management

  • Jonrinaldi, ST, MT, Ph.D, Universitas Andalas, Padang, Indonesia,
  • Dr. Salvatore Miranda, University of Salerno, Italy

Lean and Six Sigma

  • Prof. Nilda Tri Putri, S.T.,M.T.,Ph.D, Department of Industrial Engineering, Universitas Andalas, Padang, Indonesia,
  • Dr. Bernardo Villarreal, Universidad de Monterrey, Mexico
  • Edly Ramly,  Lean Six Sigma Master Black Belt, EFR Certification, Malaysia

Logistics Management

  • Ketut Gita Ayu, Industrial Engineering Department, Bina Nusantara University, Jakarta, Indonesia

Manufacturing and Design

  • Andi Sudiarso, S.T., M.T., M.Sc., Ph.D. Universitas Gadjah Mada (UGM), Yogyakarta, Indonesia,
  • Dr. Ir. Rosnani Ginting, MT, Universitas Sumatera Utara, Medan, Indonesia

Material Flow Cost Accounting (MFCA)

  • Dr. Wichai Chattinnawat, Chiang Mai University, Thailand

Modeling and Simulation

  • Professor Dr. Cucuk Nur Rosyidi, S.T., M.T.,  Department of Industrial Engineering, Universitas Sebelas Maret,
  • Dr. Ali ElKamel, University of Waterloo, Canada,
  • Dr. Magdy Helal, American University of the Middle East (AUM), Kuwait

Occupational Safety and Health (OSH)

  • Ardiyanto, ST., M.Sc., Ph.D., AEP, Universitas Gadjah Mada (UGM), Yogyakarta, Indonesia
  • Dr. Jafri Mohd Rohani, Universiti Teknologi Malaysia

Operations Management

  • Dr. Eng. Boby Kurniawan, ST, MT, Department of Industrial Engineering, Universitas Sultan Ageng Tirtayasa, Serang, Indonesia,
  • Dr. Youssef Boulaksil, United Arab Emirates University, Al Ain, UAE
  • Dr. Fernando González Aleu, Departamento de Ingeniería, Universidad de Monterrey, Mexico

Operations Research

  • Dr. Carles Sitompul, S.T., M.T., M.I.M., Department of Industrial Engineering, Universitas Parahyangan, Bandung, Indonesia,
  • Dr. Michael Mutingi, National University of Science and Technology, Windhoek, Namibia

Product Lifecycle Management

  • Dr. -Ing. Amalia Suzianti S.T., M.Sc.; Department of Industrial Engineering, Universitas Indonesia,
  • Dr. Ali Allah Verdi, Kuwait University, Kuwait

Production Planning and Management

  • Dr. Dwi Kurniawan, ST, MT, Department of Industrial Engineering, Institut Teknologi Nasional, Bandung, Indonesia,
  • Dr. Gede Agus Widyadana, Petra Christian University, Indonesia

Project Management

  • Dr. Ammar Aamer, Sampoerna University, Jakarta, Indonesia

Quality Control and Management

  • Dr. Ellysa Nursanti, ST, MT, Institut Teknologi Nasional, Malang, Indonesia,
  • Dr. Nani Kurniati, Institute of Technology Sepuluh Nopember (ITS), Surabaya, East Java, Indonesia

Reliability and Maintenance

  • Dr. Dra. Hennie Husniah, M.T., Dean,  Faculty of Engineering, Langlangbuana University, Bandung, Indonesia
  • Dr.-Ing. Zied Hajej, Université de Lorraine, France
  • Dr. Gajanand Gupta, VIT Chennai, Tamil Nadu

Sensors and Sensing Systems

  • Dr. Shahrul Kamaruddin, Universiti Teknologi Petronas, Malaysia

Service Systems and Service Management

  • Dr. Kannapha Amaruchkul, National Institute of Development Administration, Thailand

Software Testing and Quality Assurance

  • Dr. Hari Agung Yuniarto, Universitas Gadjah Mada, Indonesia,

Statistics and Optimization

  • Dr. Titah Yudhistira, ST, MT, Institut Teknologi Bandung, Indonesia,
  • Dr. Bhavin J. Shah, Indian Institute of Management Indore, Madhya Pradesh, India

Supply Chain Management

  • Dwi Agustina Kurniawati, S.T., M.Eng., Ph.D, Department of Industrial Engineering, Universitas Islam Negeri Sunan Kalijaga, Yogyakarta, Indonesia
  • Dr. Shao Hung Goh, Singapore Institute of Management (SIM) University, Singapore
  • Assoc Prof Ts. Dr. Norhayati Zakuan, Director Business Administration, Azman Hashim International Business School, Universiti Teknologi Malaysia

Sustainability in Supply Chain, Enterprise Operations and Strategies including Food Supply Chain

  • Gusti Fauza, S.T., M.T., Ph.D., Food Technology Study Program, Universitas Sebelas Maret, Indonesia,
  • Prof. Jose Arturo Garza-Reyes, Derby Business School, University of Derby, UK
  • Dr. Vikas Kumar, Bristol Business School, University of the West of England, UK

Sustainability and Green Systems

  • Dr. Wahyuda, ST, MT,  Department of Industrial Engineering, Universitas Mulawarman
  • Dr. Eng. R.B. Seno Wulung,  Politeknik ATK Yogyakarta, Indonesia,
  • Dr. Asela K. Kulatunga, University of Peradeniya, Sri Lanka,

Sustainable Manufacturing

  • Yun Arifatul Fatimah, M.T., Ph.D., Department of  Industrial Engineering, Universitas Muhammadiyah Magelang, Indonesia, Yogyakarta, Indonesia
  • Dr. Habibah Norehan Hj Haron, UTM Razak School of Engineering and Advanced Technology, Universiti Teknologi Malaysia

Systems Engineering

  • Dr. Norzelawati Asmuin, Universiti Tun Hussein Onn Malaysia (UTHM)

Technology Management

  • Dr. Alina Shamsuddin, Universiti Tun Hussein Onn Malaysia
  • Dr. Leo Aldianto MBA,MSAE , School of Business and Management, Institut Teknologi Bandung, Indonesia
  • Dr. Norizah Mohamad, Universiti Sains Malaysia, Engineering Campus, Pulau Pinang, Malaysia

Total Quality Management (TQM)

  • Dr. Salah Haridy, Department of Industrial Engineering and Engineering Management, University of Sharjah, Sharjah, UAE
  • Dr. M. Shamsuzzaman, Department of Industrial Engineering and Engineering Management, University of Sharjah, Sharjah, UAE

Transportation and Traffic

  • Dr. Abbas Mahmoudabadi, Mehrastan University, Gilan, Iran

Work Design, Measurement,  Standardization and ISO

  • Dr. Yunos Ngadiman, Universiti Tun Hussein Onn Malaysia
© IEOM Society International - 2017 IEOM 2018 - Web Design by Suvro Sudip