26th IEOM Global Engineering Education
IEOM Society International addresses the issues of Global Engineering Education. There are various levels of readiness of engineering graduates from various parts of the world. One of the main themes is how to reduce the readiness gap of engineering graduates around the world. The special focus is given to Industrial Engineering and Manufacturing Engineering including Engineering Management. Are the engineering graduates ready to take on the challenges of the current global economy? With the great success of Global Engineering Education Series of last IEOM conferences, IEOM Asia Pacific Conference will have a dedicated session for the 25th Global Engineering Education where distinguished speakers will discuss the readiness of engineering graduates for workforce around the world. This event is jointly organized by the Faculty of Engineering, Universitas Sebelas Maret in collaboration with the Faculty of Engineering, Universitas Diponegoro, and Centre for Engineering Education (CEE), Universiti Teknologi Malaysia, as the initiation of the National Conference of Engineering Education (NCEE) in Indonesia.
Global Engineering Education Topics can be related on:
- Learning Assessment
- Problem based learning
- Project based learning
- Active collaborative learning
- Student learning assessment
- Teaching and learning
- Curriculum improvement
- Innovation and entrepreneurship
- Global engineering education challenges
- Industrial engineering, manufacturing engineering, systems engineering, integrated engineering, reliability engineering, quality engineering and similar Education
Each speaker needs to submit a title of the talk, photo and a short bio as well as power point presentation. All will be included in the IEOM 2021 Indonesia Conference proceedings. If you are interested to be distinguished feature speaker, please contact firstname.lastname@example.org for details.
All speakers need to register for the conference. Please pay your registration fee ONLINE: https://www.xcdsystem.com/IEOM/attendee/index.cfm?ID=Zjhj3yM
All Times are in Indonesia Jakarta Time
September 14, Tuesday, 1:00 – 2:40 pm
Global Engineering Education I
1:00 – 1:20 pm, Tuesday, September 14
Professor Abu Masud, Ph.D., P.E.
Department of Industrial and Manufacturing Engineering
Wichita State University, Kansas, USA
Dr. Abu Masud is a professor of industrial and manufacturing engineering at Wichita State University. He has been named the Boeing Global Engineering Professor at Wichita State University. In this new post, Dr. Masud is expected to advance the College of Engineering’s strategic alliances for global enrichment and experiential learning of students as well as international research collaborations and partnerships. He received Duane and Velma Wallace Outstanding Educator Award from WSU College of Engineering. Previously he was held various positions at Wichita State including associate dean, graduate school (2008-2013), coordinator, college ABET affairs (2006-2008), associate dean, college of engineering (2004-2005), chair, industrial and manufacturing engineering department (1994-2004) and graduate coordinator of IME (1991-94, 1996-98, 2001-2004). Dr. Masud has engaged with various companies and governmental research centers including NASA Langley Research Center, VA, NASA/ASEE Summer Faculty Fellow (1991 and 1992), Boeing, Consulting Analyst, and Kuwait Institute for Scientific Research. He is member of Accreditation Review Council (2011-2014). Dr. Masud published book, book chapters, and numerous journal and conference papers. He is registered Professional Engineer at Kansas State. Dr. Masud is an IIE fellow. He received Ph.D. and M.S. in Industrial Engineering from Kansas State University, and B.S. in Mechanical Engineering from Bangladesh University of Engineering & Technology.
1:20 – 1:40 pm, Tuesday, September 14
Prof. Dr. Syed Ahmad Helmi Syed Hassan
Center for Engineering Education (CEE)
Universiti Teknologi Malaysia
Syed Ahmad Helmi is a faculty member at the Faculty of Engineering, Universiti Teknologi Malaysia. He received his Bachelor of Science in Mechanical Engineering from University of Alabama, Master of Engineering in Advanced Manufacturing and PhD in Engineering Education form Universiti Teknologi Malaysia. He is currently a fellow at the Centre for Engineering Education, head of the university’s Research Group in Engineering Education (RGEE), and the coordinator for Future Ready Educator (FREE) for School of Mechanical Engineering. Prior to joining UTM, he worked as a maintenance engineer at INTEL, Malaysia, as research officer at the Standard and Industrial Research Institute of Malaysia (SIRIM), and as mechanical and industrial engineer at Sime-Darby, Malaysia. His research focuses on Industrial Engineering and Engineering Education. His recent work includes academic change management, complex engineering problems, virtual reality and spatial visualization, manufacturing systems and optimization, supply chain, and system dynamics modelling. Over the years, he has conducted several workshops on Outcomes-Based Education (OBE) particularly in Student Centred Learning (SCL) throughout Malaysian Higher Institutions, and International Institutions such as in Indonesia, Korea, India, China, Turkey, Morocco, Qatar, South Africa, Pakistan, and Afghanistan. Throughout his career he received several awards such as teaching excellent award, excellent service awards, best paper awards, and gold medals in innovative practices in higher education. He has published several books and more than 100 papers in journals and conference proceedings.
1:40 – 2:00 pm, Tuesday, September 14
Prof. Ir. M. Agung Wibowo, MM, M.Sc, Ph.D.
Faculty of Engineering
Mochamad Agung Wibowo is a professor in Universitas Diponegoro, Indonesia. He received his Master and PhD in Nottingham University, United Kingdom. He is currently the Dean of Engineering Faculty in Universitas Diponegoro. His academic interest covers Economic Engineering, Construction Law, Construction Management, Research Design, Modelling in Construction Management, Construction Management, Quality Management and Productivity, Supply Chain in Construction and Risk Management.
2:00 – 2:20 pm, Tuesday, September 14
Dr. techn. Ir. Sholihin As’ad, M.T.
Faculty of Engineering
Universitas Sebelas Maret
Sholihin As’ad is an associate professor at Department of Civil Engineering, Faculty of Engineering, Universitas Sebelas Maret (UNS), Indonesia. Currently he is leading his faculty as Dean since 2015 and contributing in many efforts to improve the engineering education in his institution, such as introducing OBE (Outcame Based Education) curriculum, active learnings, international accreditation etc. He also actively engaged with local and international researchers. Before he start his university career in 1997, he worked as civil engineer for several projects in Indonesia under Lembanga Affiliasi Penelitian dan Industri Institut Teknologi Bandung (LAPI ITB) and other private civil engineering consultants. He completed his doctoral education in Faculty of Civil Engineering, University of Innsbruck, Austria in 2006 and collected his bachelor degree in Civil Engineering in 1992 and master degree in Civil Engineering in 1999 both from Institute Technology of Bandung (ITB), Indonesia.
2:20 – 2:40 pm, Tuesday, September 14
Dr. Neelam Srivastava
Professor & HOD Electronics & Comm. Engg.
IET Institute of Engineering & Technology Lucknow Constituent College of A K T U Lucknow
Ex- Founding Director ( REC) | Ex – CPC SPFU, U.P | Senior Member IEEE
Lucknow, Uttar Pradesh, India
Outcome Base Education – Criteria for NBA or NAAC in Indian Institutions
Prof. Neelam Srivastava received the BE degree from M.M.M. Engineering college, Gorakhpur in 1985 and the M.Tech degree from Institute of Technology, BHU Varanasi, India in 1987 and PhD degree in the area of optical communication at Lucknow university, Uttar Pradesh, India in 2004. She has been working at the Institute of Engineering and Technology Lucknow, India for 35 years. She was State Coordinator in TEQIP II an World Bank scheme of MHRD Delhi for UP for about 2 years. She has worked as a Director of Rajkiya Engineering College Kannauj from January 2017 to Jan2020 as founder Director. At present time she is Professor of Institute of Engineering & Technology, Lucknow, A constituent college of AKTU, Lucknow. She is an active member of many professional bodies like IETE, IEEE, IE board of faculty of Engineering and Technology Lucknow. Her research interest includes wireless and optical communication. She is having around 100 papers in various conferences and Journals.
2:40 – 3:00 pm, Tuesday, September 14
Dr. Laila EL ABBADI
Associate Professor of Industrial Engineering
National School of Applied Sciences (ENSA)
Ibn Tofail University
El abbadi Laila received the B.S. degree in industrial engineering from Faculty of Sciences and Technologies (FST), Sidi Mohamed Ben Abdellah University, Fez, Morocco, in 2006; the M.S. degree in industrial management and the Ph.D. degree in computer science, modeling and quality, from Dhar El Mahraz Faculty of Sciences, Fez, Morocco, in 2008 and 2013, respectively.
From 2009 to 2014, she was a part time professor at some Faculties of Sciences in Morocco. Since 2014, she is a Professor of industrial engineering, at the National School of Applied Sciences (ENSA), Ibn Tofail University, Kenitra, Morocco. She is a member of engineering sciences laboratory-Ibn Tofail University and the coordinator of the research team “industry, logistics, analysis and data protection”. Her research interests include, but not limited to the following areas: quality management, lean management and operations management.
September 14, Tuesday, 3:00 -4:40 pm
Global Engineering Education III
3:00 – 3:20 pm, Tuesday, September 14
Ts. Dr. Habibah @ Norehan Haron
Razak Faculty of Technology and Informatics
Universiti Teknologi Malaysia
Kuala Lumpur, Malaysia
Assoc. Prof. Ts. Dr. Habibah @ Norehan Haron received her B. Eng (Hons) in Manufacturing Engineering from Kingston Polytechnic, UK and MSc degree in Manufacturing Systems Engineering from Warwick University. Later she continues her PhD study in Engineering Education from Universiti Teknologi Malaysia. She is currently an Associate Professor at Razak Faculty of Technology and Informatics, Universiti Teknologi Malaysia, Kuala Lumpur. She is also a contract lecturer at Meiji University, Japan; and a special program lecturer at Saffat Academy, Sudan. Her areas of research are in Engineering Education, STEM and Engineering Business Management. Her research and activities have led to publications in books, journals, conference proceedings and articles in the newsletters, and have also qualified her to receive over 20 awards. She has more than 10 intellectual properties. She is also an active committee member of Women Engineers Section (WE) of The Institution of Engineers Malaysia; represented Malaysia for women engineers at the Annual Meeting of Asia Pacific Nation’s (APNN) of International Network of Women Engineers and Scientists (INWES). Apart from her other official duties as an academic staff, she is actively contributing back to the society; organizes community activities for the children of Orang Asli, rural and urban poor. Among the main and consistent projects since 2014, as the founder of Adopt a Kampung team, she had developed and implemented STREAM Fun Learning Toy Libraries, which accommodate various STEM Programs with the holistic and integrated concept of Science, Technology, Religion, Engineering, Arts and Mathematics (STREAM) to remote, rural and urban poor communities in several states in Malaysia.
3:20 – 3:40 pm, Tuesday, September 14
Ir., B.Eng., M.Sc., Ph.D., CHFP., IPM., ASEAN Eng.
DEAN, Faculty of Creative Industries
Associate Professor in Industrial Engineering
University of Surabaya
Certified Human Factors Professional
Associate Professional Engineer
Technical Committee Member of IEA (International Ergonomics Association) on Affective Design
Vice President of PEI (Indonesian Ergonomics Society) for Education and Certification Affairs
Markus Hartono is an associate professor in the Department of Industrial Engineering, University of Surabaya (Ubaya), Indonesia. He received his Bachelor of Engineering (B.Eng.) in Industrial Engineering from University of Surabaya (Ubaya), Indonesia, in 2000. He received honors with predicate of Cum Laude for his bachelor graduation. In year 2004, he received ASEAN Graduate Scholarships (AGS) award for pursuing his master’s degree in industrial and Systems Engineering from National University of Singapore (NUS) and obtained his Master of Science (M.Sc.) in 2006. In year 2008, he received a prestigious award of NUS Graduate Research Scholarships for 4 years for pursuing his PhD and obtained his PhD degree in 2012.
In year 2011, he received two prestigious awards, i.e., Best Paper Award and Young Service Researcher Award during the 2nd International Research Symposium in Service Management in Yogyakarta, Indonesia. In year 2015, he received Best Paper Award on Quality in Research (QiR) international conference, and third winner of Dosen Berprestasi Kopertis VII and the finalist of Dosen Berprestasi Nasional, held by Directorate of Indonesian Higher Education, Ministry of Research, Technology and Higher Education. The subsequent achievement was the recipient of Ubaya Research Award 2014 & 2016 for the best researcher. In year 2017, he achieved the 1st rank of Outstanding Head of Department of Ubaya (Kaprodi Berprestasi Ubaya) and achieved the 1st rank of Outstanding Head of Department in Kopertis VII Region (Kaprodi Berprestasi Kopertis VII Jawa Timur). In year 2016, he got a grant from Lembaga Pengelola Dana Pendidikan (LPDP) – Kementrian Keuangan RI (Ministry of Finance Republic of Indonesia) for his international journal publication. Moreover, in year 2016 he received the1st rank of Best Lecturer of Ubaya and the 2ndwinner of Dosen Berprestasi Kopertis VII. The recent award he obtained in 2017 is the Best Paper Award of the 15th Quality in Research (QiR 2017) international conference. In 2018, he was granted as the 1st rank of outstanding lecturer (Dosen Berprestasi Juara I) from University of Surabaya, and the 2nd rank of outstanding lecturer (Dosen Berprestasi Juara II) from Kopertis VII, which is now called as LLDIKTI VII. He also has been awarded Best Presenter – Gold Medal at the International Mechanical and Industrial Engineering Conference 2018 (IMIEC 2018) in Malang, Indonesia. His teaching expertise are in Ergonomics/Human Factors Engineering, Kansei Engineering, product design and management, work measurement, time and motion study, and service innovation and quality management. His research interests are in Ergonomics, Kansei Engineering, product design, work and motion measurement, and service quality management. He has conducted several training/workshop and consultancy works to industries on the topics of time and motion study, work sampling, Methods Time Measurement (MTM), learning curve and Ergonomics. He has published his scientific papers in several top tier (Q1) international journals such as Ergonomics (by Taylor and Francis), International Journal of Industrial Ergonomics (by Elsevier), Total Quality Management and Business Excellence (by Taylor and Francis) and some other reputable journals such as International Journal of Human Factors and Ergonomics (by Inderscience), IEEE Xplore, Procedia Finance and Economics (by Elsevier), International Journal of Services, Economics and Management (by Inderscience) and International Journal of Technology (recently qualified as Q2 journal).
His scientific articles have been cited by more than 620 published scientific papers and showed H-index of 11 (GoogleScholar version), H-index of 6 (Scopus version) and SINTA overall score of 23.32. He is one of the top 10 writers in University of Surabaya. He has acted as a scientific reviewer for the regional and international journals such as International Journal of Industrial Ergonomics (by Elsevier), International Journal of Engineering, Science and Technology, the Journal of Industrial Engineering and Management, and Management Decision (by Taylor and Francis). In addition, he serves as scientific committee for Asian Conference on Ergonomics and Design (ACED), Asia Institute of Industrial Engineer (IIE), South-east Asia Network of Ergonomics Societies (SEANES), and member of Affective Design Technical Committee of IEA. He is also certified human factors professional with Board of Certification in Professional Ergonomics Inc (BCPE), Willingham, WA, USA, Vice President for Indonesian Ergonomics Society (2015-2018), Chief for Research Collaboration Strengthening of Association of Industrial Engineering Higher Education Administration (BKSTI, 2017-2020) and Council of Asian Conference on Ergonomics and Design (ACED). He has been certified as Associated Professional Engineer (IPM) by the Indonesian Institute of Engineers (PII) for the period of 2017 – 2022 and Indonesian Accreditation Board for Engineering Education (IABEE) Evaluator/Observer since July 2018. In September 2019, he got the title of ASEAN Engineer (ASEAN Eng.) from The ASEAN Federation of Engineering Organisations (AFEO).
3:40 – 4:00 pm, Tuesday, September 14
Professor Roger Hadgraft
Professor of Engineering & IT Professional Practice
UTS: University of Technology Sydney
Sydney, New South Wales, Australia
Roger Hadgraft is a civil engineer with 30 years’ experience in transforming engineering education through project-based learning (PBL) and educational technology. He was instrumental in introducing a project-based curriculum in civil engineering at Monash University and in several disciplines at the Royal Melbourne Institute of Technology (RMIT). Roger was an Australian Learning and Teaching Council Discipline Scholar and co-author of the Threshold Learning Outcomes for Engineering and Information Technology, and he has been a member of several national learning and teaching projects. His current role at the University of Technology Sydney is to transform the engineering programs through the integration of studios, student-centred project-based learning.
4:00 – 4:20 pm, Tuesday, September 14
4:20 – 4:40 pm, Tuesday, September 14
Dr. Aisha Mahmood, Ph.D. Engineering Education
Department of STEM Education
Division of Education
University of Education
Township Campus Lahore
Dr. Aisha Mahmood has a unique educational background and diverse professional experience spreading over more than two decades. After completing her PhD in Engineering Education (2015) from Universiti Teknologi Malaysia, she joined Namal College, Mianwali (April 2015-May 2017) as Assistant Professor in the Department of Electrical Engineering. Currently, she is working at the Department of STEM Education in University of Education, Lahore, as Assistant Professor of (Engineering) Education (April 2018 to date). Aisha has also been engaged online as a consultant of “Engineering Education Research & Practice” and as a certified trainer of “TRIZ (Theory of Inventive Problem Solving) Practitioner level 1”. Aisha’s current & future research-cum-practice interests are AI in Education, Big Data in Education, Learning Engineering, Makification, Learning/Instructional Technologies, Social and Emotional Learning, Life Skills, Value-Based Education, Mathematical Thinking, Design Thinking, Inventive Problem Solving (TRIZ), Students’/Teachers’ Personas, Blended Learning, Effective Teamwork, Continued Professional Development (CPD) and Change Models.
4:40 – 5:00 pm
Dr. Indah Widiastuti
Faculty of Education &Teacher Training
Universitas Sebelas Maret
Assoc. Prof. Indah Widiastuti received her B. Eng in Industrial Engineering from Sepuluh Nopember of Technlogy and M.Eng degree in Industrial Engineering from Universitas Gadjah Mada. Later she continues her PhD study in Material Engineering from Swinburne University of
Technology, Melbourne, Australia. She is currently an Associate Professor at Faculty of Education &Teacher Training, Universitas Sebelas Maret, Surakarta. Her areas of research are in Engineering Education, STEM and Composite Materials. She ventured into University Teaching and research
career since 2005 and have published over fifty (50) research articles in peer reviewed local and international Journals and conference proceedings.
September 14, Tuesday, 5:00 – 6:40 pm
Global Engineering Education IV
5:00 – 5:20 pm, September 14, Tuesday
Prof. Ir. Dr. Siti Hawa Hamzah
Director of the Engineering Accreditation Department
Board of Engineers, Malaysia (BEM)
Department of Civil Engineering
UiTM Shah Alam
Ir. Dr. Siti Hawa Hamzah is currently the Director of the Engineering Accreditation Department, Board of Engineers, Malaysia (BEM). She is a retired Professor in Civil and Structural Engineering from UiTM Shah Alam. She specializes in load bearing wall panel structures and engineering education. She has been providing extensive trainings on OBE and engineering education. She has provided impactful contributions to Afghanistan, Bangladesh and Qatar on OBE and quality assurance. Awarded with the Hon. MAFEO, IEM Woman Engineer and more than 20 research accolades. Siti published 14 books in structural engineering and more than 175 technical papers. She holds bachelor and master degrees; and certificate of education from the USA. She completed her PhD from UKM. She’s a PEPC, FIEM, MRM and PSWM.
5:20 – 5:40 pm, September 14, Tuesday
Presentation Title: Enhancing Sustainable Engineering Education And Practice In Developing Countries Through University-Industry Collaboration: A Nigeria Perspective
Lecturer and Researcher
Department of Mechanical Engineering
University of Nigeria Nsukka
Enugu State Nigeria
Celestine Nnaemeka Achebe is a lecturer and researcher in the field of Industrial Engineering and Operations Management, Department of Mechanical Engineering, University of Nigeria, Nsukka. He Obtained a bachelor’s degree in Metallurgical and Materials Engineering at Nnamdi Azikiwe University, Awka Nigeria and master’s degree in Mechanical Engineering, University of Nigeria where he is currently on doctoral degree programme. He is a COREN registered Engineer. Before embracing university teaching and research career, Engr Achebe worked several years as supervisor at FRSC License Vehicle Number Plate plant, Abuja, and later the Head of Plant, Delta State Plant for several years. He had published works in peer reviewed local and international journals and conference proceedings. His research interests include operations research and operations management, material composite design and processing, and multicomponent alloys. C.N. Achebe is interdisciplinary savvy.
Dr. P.A. Ozor
Department of Mechanical Engineering, University of Nigeria Nsukka
Enugu State Nigeria
Paul Amaechi Ozor is currently the Head, Department of Mechanical Engineering, University of Nigeria Nsukka. He obtained a bachelor’s degree in Mechanical/Production Engineering at Enugu State University of Science and Technology. He later specialized in Industrial Engineering and Management, and obtained both Masters and PhD in the field during 2008 and 20016 respectively. Dr Ozor had been a project manager of a reputable Engineering and Services company in Nigeria for over five years. He ventured into University Teaching and research career since 2009 and have published over sixty (60) research articles in peer reviewed local and international Journals and conference proceedings. Dr Ozor is a scholar of the Association of Commonwealth Universities. He has won and completed the prestigious TWAS-NRF-DST postdoctoral fellowship to the University of Johannesburg, where he is currently a Senior Research Associate. He has visited several countries including Washington DC, USA, Lisbon, Portugal, Shanghai, China, Bangkok, Thailand, Agadir, Morocco, South Africa, etc, on research grounds. Furthermore, He has supervised significant graduate and undergraduate students to successful study completion, and is still supervising local and international students. His research interests include Operations modelling, Quality management, Project Management, Systems Analysis, Asset Management, Environmental influence and Sustainability.
5:40 – 6:00 pm, September 14, Tuesday
Dr. Ahm Shamsuzzoha received his Master’s degree in Mechanical Engineering, majoring Energy and Environment from University of Strathclyde, UK and Ph.D. in Industrial Management from the University of Vaasa (UVA), Finland. He also received his Teacher’s Pedagogical Qualification (Professional Teacher Education) from Tampere University of Applied Sciences, Finland in 2019. Ahm Shamsuzzoha is working as a Tenure Track Professor, Industrial Systems Analytics, School of Technology and Innovations, University of Vaasa and in the research platform Digital Economy. He has been involved in a leading position in a number of European Union projects and nationally funded projects in Finland. He is currently also involved in several ongoing projects both in European Union level and local projects in Finland. His research interests are mainly focused on supply chain and logistics management, entrepreneurships, innovation management, blockchain, space data, sustainable energy and environment.
6:00 – 6:20 pm, September 14, Tuesday
Dr. Ir. Rahmat Nurcahyo
Industrial Engineering Department
Head of Quality Assurance and Management System Unit
Faculty of Engineering
University of Indonesia
Rahmat Nurcahyo is a Professor in Industrial Management, Industrial Engineering Department, Universitas Indonesia. He is now as Head of Quality Assurance and Management System Unit in Faculty of Engineering, Universitas Indonesia. He has responsibility in implementation of OBE Education System and ISO 9001, 14001 and 45001 in Faculty of Engineering, Universitas Indonesia. He earned Bachelor in Mechanical Engineering Department, Universitas Indonesia, Masters in Industrial Management, University of New South Wales, Australia and Doctor in Strategic Management, Universitas Indonesia. His research interests include management systems, quality and maintenance management.
6:20 – 6:40 pm, September 14, Tuesday
New Image Building Services Inc.
Troy, Michigan, United States
John S. Ezzo founded New Image Building Services, a full-service facility management company with global headquarters in Michigan with a service footprint throughout the Midwest United States, Qatar and Latin America. The companies employ over 1200 people and numerous sub-contractors.
John’s entrepreneurial journey included international expansion to Qatar, the UAE and Latin America. John and his team were directly involved in the opening of two of the largest and most visited facilities in the Middle East including the Dubai Mall and Hamad International Airport. John has participated with the US State Department on trade delegations to the Middle East and an industry trade mission to Brazil.
John holds a bachelor’s degree in business administration from Lawrence Technological University in Southfield Michigan where has returned to speak to students on how they may use engineering to solve problems and in doing so create entrepreneurial opportunities.
John has written and been interviewed for numerous articles for industry magazines and books. He has spoken around the North America on topics including public relations, marketing, service diversification and building a management team. John has also spoken for the Department of Homeland Security to the nation’s largest real estate owners on the importance of protecting critical infrastructure from insider threats due to outsourcing of facilities services.
John is proficient in spoken and written Spanish.
6:40 – 7:00 pm, September 14, Tuesday
Azizah Yusof, PhD
Department of Science and Mathematics Education and Creative Multimedia
Universiti Teknologi Malaysia
Johor Bahru, Malaysia
Faculty of Education
Simon Fraser University (SFU)
British Columbia, Canada
Azizah Yusof is currently a research fellow and lecturer in the field of Educational Technology and Assistant Lecturer at Universiti Teknologi Malaysia, Johor Bahru Campus. She holds a Bachelor of Science degree in Computer Science and a Master of Educational Technology from Universiti Teknologi Malaysia. She has taught courses in Computer Network Infrastructure Cabling for engineering students at Universiti Teknologi Malaysia Life-Ready Graduate Initiatives (UTM i-League). She is a certified Microsoft Systems Engineer with over 10 years of experience. She has published several research papers in refereed journals and international conferences related to her area of interest. Her current research interests include Service Learning, Online Learning, Gamification, Generic Skills and Massive Open Online Courses (MOOCs) in Higher Education Institutions (HEI).
Past Programs of IEOM Global Engineering Education
- 2014 IEOM Bali Global Engineering Education Speakers
- 2015 IEOM Orlando Global Engineering Education Speakers
- 2015 IEOM Dubai Global Engineering Education Speakers
- 2016 IEOM Kuala Lumpur Global Engineering Education Speakers
- 2016 IEOM Detroit Global Engineering Education Speakers
- 2017 IEOM Bogota, Colombia
- 2017 IEOM Bristol, UK
- 2017 IEOM Rabat Global Engineering Education Speakers
- 2018 Pretoria – IEOM Global Engineering Education
- 2018 Washington DC – IEOM Global Engineering Education
- 2018 Paris – IEOM Global Engineering Education
- 2018 Bandung – IEOM Global Engineering Education
- 2019 Riyadh – IEOM GEE
- 2019 Toronto – IEOM Global Engineering Education
- 2019 Pilsen – IEOM Global Engineering Education
- 2019 Bangkok – IEOM Global Engineering Education
- 2020 Dubai- IEOM Global Engineering Education
- 2020 Detroit GEE
- 2020 Harare
- 2020 Singapore
- 2021 Sao Paulo
- 2021 Haiti
- 2021 Harbin, China
- 2021 Rome
- 2021 Bangalore
- 2021 Surakarta
(Click on the name of the speakers for pdf presentation file)
- Dr. Jinwoo Park
- Prof. Don Reimer
- Dr. Hongyi Sun
- Dr. Ilham Kissani
- Dr. Eugene Rex Jalao
- Dr. Gulnara Abitova
- Dr. James Chen
- Dr. FJ Kahlen
- Dr. Erik Sundin
- Dr. Abdul Hakim Halim
If you have any question about IEOM Conference and/or IEOM Society, please contact: email@example.com.