Proceedings – IMEOM 2021 Dhaka Conference
ISSN 2691-7734 (print)
ISSN 2691-7726 (online)
ISBN: 978-1-7923-6132-6
ID 146 COVID-19 Testing Supply Chain and Logistics Systems
Erik Ramazzini, Ian Goulding, Nolan Brown, Joseph Garcia and Mohamed Awwad, Industrial and Manufacturing Engineering Department, California Polytechnic State University, San Luis Obispo, CA 93407, USA
ID 152 Analytical Solution of a Prestressing Strand Subjected to
Axial Strain
Yusuf Aytaç Onur, Department of Mechanical Engineering, Zonguldak Bulent Ecevit University, Zonguldak, Turkey
Abdullah Tombak, Department of Motor Vehicles and Transport Technologies, Zonguldak Bulent Ecevit University, Zonguldak, Turkey
ID 153 Increased Reshoring Efforts in Response to Global
Emergencies
Michaela Fromm, Emily Johnson, Sascha Keir, Jack Lugo, Tatum Shore and Mohamed Awwad, Industrial and Manufacturing Engineering Department,
California Polytechnic State University, San Luis Obispo, CA 93407, USA
ID 179 Synchronous Control of Maxon EPOS4 Positioning Controller Using NI LabVIEW and NI Industrial Communications for CANopen
Asif Al Zubayer Swapnil and Mohammad Habibur Rahman, Department of Mechanical Engineering, University of Wisconsin-Milwaukee Milwaukee, WI, USA
ID 228 Optimization of Vendor Rate Analysis Report by Visual Basic for Applications (VBA): A Case Study of Footwear Industry
Muhammad Ahmed Kalwar, Post Graduate Alumini (MUET) & Assistant Manager Production, Shafi Private Limited, Lahore, Punjab, Pakistan
Shakeel Ahmed Shaikh, Associate Professor & Co-director (Post Graduate Studies), Department of Industrial Engineering & Management, Mehran UET, Jamshoro, 76062, Sindh, Pakistan
Muhammad Ali Khan, Post Graduate Student & Assistant Professor, Department of Industrial Engineering & Management, Mehran UET, Jamshoro, 76062,Sindh, Pakistan
Tanveer Sarwar Malik, Executive Officer (Planning & Costing), Starlet Shoes Private Limited, Lahore, Punjab, Pakistan
ID 259 Statistical Analysis of the Impact of Penalties in Driving: A Case
Study
Muhammad Ahmed Kalwar, Post Graduate Alumini (MUET) & Assistant Manager Production, Shafi Private Limited, Lahore, Punjab, Pakistan
Shakeel Ahmed Shaikh, Associate Professor & Co-director (Post Graduate Studies), Department of Industrial Engineering & Management, Mehran UET, Jamshoro, 76062, Sindh, Pakistan
Muhammad Ali Khan, Post Graduate Student & Assistant Professor, Department of Industrial Engineering & Management, Mehran UET, Jamshoro, 76062,Sindh, Pakistan
ID 260 Exploring the Potential of Six Sigma (DMAIC) in Minimizing
the Production Defects
Pawan Kumar, Under Graduate Final Year Student & Assistant Group Leader (Final Year Thesis), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan.
Muhammad Ali Khan, Assistant Professor & PhD Scholar, Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan.
Usama Khursheed Mughal, Under Graduate Final Year Student & Group Leader (Final Year Thesis), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan.
Suneel Kumar, Under Graduate Final Year Student & Group Member (Final Year Thesis), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan.
ID 280 Evaluation of Work-Life Balance in Women Engineers: A
Review
M. M. Manyuchi, Department of Operations and Quality Management, Faculty of Engineering and the Built, Environment, University of Johannesburg, South Africa
R. Rusike, Graduate School of Business Management, Bindura University of Science Education, Zimbabwe
N. Sukdeo, Department of Operations and Quality Management, Faculty of Engineering and the Built, Environment, University of Johannesburg, South Africa
ID 281 An Analysis of the Theoretical Framework for Situational
Leadership
M. M. Manyuchi, Department of Operations and Quality Management, Faculty of Engineering and the Built, Environment, University of Johannesburg, South Africa
N. Sukdeo, Department of Operations and Quality Management, Faculty of Engineering and the Built, Environment, University of Johannesburg, South Africa
ID 304 Optimizing the Rock Mechanic Laboratory Operations: Simulation-Based Methodology for Investment Decision
Sindu Umboro and Yuliani Dwi Lestari, Department of Operation and Performance Management, School of Business and Management, Institut Teknologi Bandung, Indonesia
ID 305 Essentiality of MIS in Data Analytics & Cloud Computing for Sustainable Revolution of Bangladesh RMG Industry Through Production Monitoring
Shanjoy Chowdhury, Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology (RUET) Rajshahi, Bangladesh
Md. Shahid Uz Zaman, Department of Computer Science & Engineering, Rajshahi University of Engineering & Technology (RUET) Rajshahi, Bangladesh
ID 308 Analyzing Musculoskeletal Discomforts of the Selected Bangladeshi University Students Using Laptops
Mohammad Iqbal, Qawsar Ali and Konkon Das, Department of Industrial and Production Engineering Shahjalal University of Science and Technology
ID 314 Development of Disaster E-Logistics Model Based on Geographical Information System
Inayatulloh, Information Systems Department, School of Information system, Bina Nusantara University Jakarta, Indonesia 11480
Deny Jollyta, Institut Bisnis Dan Teknologi, Pelita Indonesia
Sastya Hendri Wibowo, Informatics Engineering Study Program, Faculty of Engineering, University of Muhammadiyah Bengkulu, Indonesia
Emi Suwarni, Universitas Teknokrat Indonesia.
M. Haviz, IAIN Batusangkar, Sumatera Barat, Indonesia
Muhammad Abrar Kasmin, Universitas Potensi Utama
Eka Sasmita Mulya, ST. Msi, Politeknik Negeri Jakarta-Teknik Sipil
ID 315 Factors Supporting Use and Satisfaction Of Mobile Banking in Indonesia
Inayatulloh Information Systems Department School of Information system Bina Nusantara University Jakarta, Indonesia 11480
Prasetya Cahya Saputra Information Systems Department School of Information system Bina Nusantara University Jakarta, Indonesia 11480
Deny Jollyta, Institut Bisnis Dan Teknologi, Pelita Indonesia
Enggal Sriwardiningsih, Management Department, Binus Business School, Bina Nusantara University, Jakarta, Indonesia
Indra Kusumadi Hartono, Information Systems Department, School of Information system, Bina Nusantara University Jakarta, Indonesia 11480
Rozali Toyib, Universitas Muhammadiyah Bengkulu, Indonesia
Murthada, STKIP Muhammadiyah, Aceh Tengah, Indonesia
ID 316 Efficient Pre-Disaster Planning and Optimization for A Multi-Echelon Relief Distribution Network: A Case Study in Bangladesh Perspective
A. B. M. Mainul Bari, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh
K Jamie Rogers, Jay M Rosenberger, Department of Industrial & Manufacturing Systems Engineering, The University of Texas at Arlington, USA
ID 317 Determination of Force During Wire Drawing of Copper
Sunday J. Ojolo and Mojisola G. Omolumo, Department of Mechanical Engineering University of Lagos Akoka, Lagos
ID 320 Understanding Customer behaviors of Online Food Delivery for maximum selling- a Case Study on Go-food and Grabfood platform used by Anasuki Nuggets Business
Edwin Pangestu, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia
Mulyani Karmagatri, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480
Doni Purnama Alamsyah, Nur Azmi Karim, Entrepreneurship Department, BINUS Business School Undergraduate Program Bina Nusantara University, Jakarta, Indonesia
ID 321 The Effectiveness of Social Media Advertising to Increase Engagement in the Craft Business – Case Study of Instagram Advertising used in Cressa Craft
Catherine Angelina Husein, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia
Mulyani Karmagatri, Entrepreneurship Department, BINUS Business School Undergraduate Program Bina Nusantara University, Jakarta, Indonesia 11480
Ivan Diryana Sudirman, Entrepreneurship Department, BINUS Business School Undergraduate Program Bina Nusantara University, Jakarta, Indonesia
Nur Azmi Karim, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia
ID 322 Implementation of Customer Relationship Management in Small Laundry Business to Increase Customer Satisfaction
Thania Fardha Yughni, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia
Mulyani Karmagatri, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480
Dian Kurnianingrum, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480
Nur Azmi Karim, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia
ID 323 Assessment of the Elements of Industry 4.0 in Terms of Their Implementation Potentials: In the Context of the Ready-Made-Garment Industries of Bangladesh
A. B. M. Mainul Bari, Ahsan Habib, Mehedi Hasan Akash, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh.
ID 324 Understanding Customer behaviors of Online Food Delivery for maximum selling- a Case Study on Go-food and Grabfood platform used by Anasuki Nuggets Business
Edwin Pangestu, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia
Mulyani Karmagatri, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480
Doni Purnama Alamsyah, Nur Azmi Karim, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia
ID 325 The Influence of E-Commerce Consumer Intention Factors in Choosing & Willingness to Pay for Eco-Friendly shipping on Last-Mile Delivery
Afriandi Ginting, Farizal, Department of Industrial Engineering, University of Indonesia Salemba, Jakarta, Indonesia
ID 326 QbD Approach for Successful Initial Sterile Aseptic Filling Facility Validation
Pitoyo Amrih, Eko Pujiyanto, Department of Industrial Engineering Sebelas Maret University Surakarta, Indonesia
ID 327 Quantitative Comparison of the Three Vaccination Centers in the Philippines: An Assessment for the Optimum Practices Using Queueing Theory
Marvin D. Bermeo, Eula Mae Q. Berroya, Stephanie J. Besana, Nellaine P. Delos Santos, Cyrille Earl A. Helis, Angela Joyce C. Martin, Frances O. Sotto, Department of Industrial Engineering, College of Engineering and Architecture, Technological Institute of the Philippines – Quezon City, Cubao, Quezon City, Philippines
ID 328 A Review of Neuroeconomic Research Using Bibliometric Analysis
Agung Purnomo and Mardhatillah Shanti, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University
Jakarta 11480, Indonesia
Nuzula Firdausi, Institute for Research and Community Services, Universitas Nahdatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Dian Utami Sutiksno, Business Administration Department, Politeknik Negeri Ambon, Ambon 97233, Indonesia
ID 329 Sundanese Entrepreneurial Leadership Model of Gen Z Mulyani Karmagatri, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480
Hazmilah Hasan, Faculty of Technology Management and Technopreneurship, Universiti Teknikal Malaysia Melaka
Andreas Chang, Santika Syaravina, Ivan Diryana Sudirman, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480
ID 330 Understanding Entrepreneurial Leadership Model of Gen Z
in Confucian Values Frames
Mulyani Karmagatri, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480
Hazmilah Hasan, Faculty of Technology Management and Technopreneurship, Universiti Teknikal Malaysia Melaka
Andreas Chang, Santika Syaravina, Ivan Diryana Sudirman, Puji Prabowo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480
ID 331 Cultural Acculturation in Entrepreneurial Leadership
Model of Gen Z
Mulyani Karmagatri, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480
Hazmilah Hasan, Faculty of Technology Management and Technopreneurship, Universiti Teknikal Malaysia Melaka
Andreas Chang, Santika Syaravina, Ivan Diryana Sudirman, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480
ID 332 Utilization of Holistic Marketing Concepts on Gojek
Dian Kurnianingrum, Mulyani Karmagatri, Iston Dwija Utama, Nur Azmi Karim, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480
ID 335 Quality Improvement of a Garment Industry in Myanmar
using Total Quality Management Tools
Su Nandar Hlaing and Aung Myo Lwin, Department of Mechanical Engineering, Yangon Technological University, Yangon, Myanmar
ID 336 Factors Affecting Problem-Solving Competency of Statistics Students in E-Learning: Education Perspectives Amidst the COVID-19 Crisis in the Philippines
April Joy C. Dawates, Pearl R. Dela Peña, Marie Isabel F. Garza, Justin A. Rivera, Niña M. Suarez, Joshua B. Torremucha, Romalyn L. Galingan, Department of Industrial Engineering, College of Engineering and Architecture, Technological Institute of the Philippines – Quezon City, Cubao, Quezon City, Philippines
ID 338 Perceived Stress and Memory Performance: A Correlational Study among Students taking Undergraduate and Vocational Program during Online Learning in Luzon, Philippines
Almeyda, Jamaela L., Bondad, Eunice Denlee A., Fabillo, Maria Renci Anne S., Falic, Jhonvi F. , Hipolito, Franchesca D., Lagrosa, Ma. Jovi Louise P., Managbanag, Shaira F., Galingan, Romalyn L., Palisoc, Arriane A., Department of Industrial Engineering, College of Engineering and Architecture, Technological Institute of the Philippines – Quezon City, Cubao, Quezon City, Philippines
ID 339 Feasibility Study to Catch up Opportunity for Creating A New Venture
Gabriela Victoria Haris Gunawan Sutanto, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia
Mulyani Karmagatri, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia
Rudy Aryanto Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia 11480
ID 340 The impact of location decision: A review
Alice Kabamba Lumbwe, Eveth Nwobodo-Anyadiegwu, Charles Mbohwa Department of Quality and Operations Management University of Johannesburg Johannesburg, South Africa
ID 341 CFD Analysis of Fluid Flow and Heat Transfer of a Triangle Object in a Rectangular Cavity
Anzaman Hossen, Anik Hira, Nazmus Sakib, Khandkar Aftab Hossain,Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh
ID 343 Benchmarking as a tool for improvement of production management within the manufacturing sector
Mthethwa SG, Lumbwe AK, Nwobobo-Anyadiegwu EN, Department of Quality and Operations management, University of Johannesburg, Johannesburg, South Africa
ID 344 The Importance and Satisfaction of Location Decision Factors of Manufacturing and Services SMMES in Johannesburg
Alice Kabamba Lumbwe, Eveth Nkeiruka Nwobodo-Anyadiegwu, Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
ID 345 Development of A Desktop-mounted Rehabilitation Robot For Upper Extremities
Md Mahafuzur Rahaman khan, Department of Mechanical Engineering, University of Wisconsin-Milwaukee, Milwaukee, USA
Tanvir Ahmed, Department of Biomedical Engineering, University of Wisconsin-Milwaukee, Milwaukee, USA
Jaime Rafael Hernandez Pallares, Department of Mechanical Engineering, University of Wisconsin-Milwaukee, Milwaukee, USA
Md Rasedul Islam, Richard J. Resch school of engineering, University of Wisconsin-Green Bay, Green Bay, WI, USA
Brahim Brahmi, Department of Electrical and Computer Engineering, Miami University, Oxford Ohio, USA
Mohammad Habibur Rahman, Department of Mechanical Engineering, University of Wisconsin-Milwaukee, Milwaukee, USA
ID 346 Menu Planning of Bento Meals Based on Mathematical Optimization Considering the Similarity of Dishes and Ingredients
Kazumasa Sugawara and Kazuki Ota, The field of Industrial Engineering and Management, Course of Engineering, Graduate School of Engineering, Kanagawa University
Hideki Katagiri, Department of Industrial Engineering and Management, Faculty of Engineering, Kanagawa University
ID 348 The Effects of Dimples on Heat Transfer and Fluid Flow on a Circular Tube: A Computational Investigation
Anzaman Hossen, Md. Shajal Chowdhury, Mohammad Ilias Inam, Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh
ID 350 Comparison of Mixing Performance of Different Types of Passive Micromixers Using Numerical Analysis
Tanveer Rahman, S M Faisal Ahmmed, Zubairul Alam, Moddassir Khan Nayeem, Department of Industrial & Production Engineering, Military Institute of Science & Technology, MIST Dhaka, Bangladesh
ID 352 The economic sustainability of Spheroidization of Ti6Al4V with respect to Additive Manufacturing: Literature Review
Tsepo.M. Dube, Department of Industrial Engineering University of Stellenbosch Stellenbosch, South Africa
Hertzog Bissett, Research and Development, South African Nuclear Energy Corporation SOC Ltd, South Africa
Stephen Matope, Department of Industrial Engineering, University of Stellenbosch, Stellenbosch, South Africa
Andre F van der Merwe, Department of Industrial Engineering University of Stellenbosch, Stellenbosch, South Africa
ID 356 Experimental Investigation on The Performance of Air Humidifying System with Desiccant Regenerator Using Solar Water Heater
Gogan Dhar, Md. Tazul Islam, Pramit Ghosh, Prasenjit Chakraborty, Department of Mechanical Engineering, CUET, Chattogram-4349, Bangladesh
ID 357 Mapping and Localization in 3D Space for Vision-based
Robot Manipulation
Md Tanzil Shahria, College of Engineering & Applied Science, University of Wisconsin-Milwaukee, Wisconsin, United States
Md Ishrak Islam Zarif, Department of Computer Science, Marquette University, Wisconsin, United States
Md Samiul Haque Sunny, College of Engineering & Applied Science, University of Wisconsin-Milwaukee, Wisconsin, United States
Sheikh Iqbal Ahamed, Department of Computer Science, Marquette University, Wisconsin, United States
Mohammad H. Rahman, College of Engineering & Applied Science, University of Wisconsin-Milwaukee, Wisconsin, United States
ID 365 Experimental Investigation for The Heat Transfer Enhancement in A Tube by Using MgO Nanofluid
Gogan Dhar, Mohammad Nezam Uddin Chy, Jamal Uddin Ahamed, K. M. Arafatul Kabir, Department of Mechanical Engineering, CUET, Chattogram-4349, Bangladesh
ID 366 Healthcare Service Quality Improvement Migration
Strategy: A Lean Six Sigma Based Approach
Dr R. Mutyavavire and Mayver Ramogayane, Department of Mechanical and Industrial Engineering (MIET), University of Johannesburg (UJ), Johannesburg, South Africa
ID 367 Implementing Industry 4.0 Teaching principles in Industrial Engineering Laboratories
R. Mutyavavire and Nicholas Maibela, Department of Mechanical and Industrial Engineering (MIET), University of Johannesburg (UJ), Johannesburg, South Africa
ID 372 Web-Based Networking Process of Supply Chain in Additive Manufacturing
Fatema Tuz Zohra, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Faysal Talukder, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Ummey Kulsum, Shanta Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Binoy Debnath, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology (BUET)
M. Azizur Rahman, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
ID 374 The Optimization Production of SMEs Based on Ergonomics Perspective
Anang Ramadhan Feri Pratama, Kukuh Lukiyanto, R. Aditya Kristamtomo Putra, and Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
ID 378 The Role of Digital Marketing on Consumer Preferences in
Purchase of Frozen Food Startup Products
Mabel Lutgardis, Kukuh Lukiyanto, R. Aditya Kristamtomo Putra, and Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
ID 381 PLC Based Monitoring and Prediction: A Case Study of Injection Molding
Saif Abdul Alif, Md. Amirul Islam Sakib, Md Shihab Shakur, Shekh Rafin Bin Alam, M. Azizur Rahman, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
ID 383 Identifying Employees Productivity Performance Factors and Evaluating their Interrelationship: An Exploratory Case Study in Bangladesh Automobile Assembly Industry
Md. Aqib Aman, Department of Industrial and Production Engineering (IPE), National Institute of Textile Engineering and Research (NITER), Dhaka, Bangladesh
Golam Sakaline, Department of Industrial and Production Engineering (IPE), Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
Md. Mahraj Uddin and Dr. Mohammad Iqbal, Department of Industrial and Production Engineering (IPE), Shahjalal University of Science and Technology (SUST), Sylhet, Bangladesh
ID 386 Performance Analysis of Some Independent Variables in Unreliable Manufacturing Industry
Anupom Barua, PhD student, ME dept., CUET, Bangladesh
Dr. Md. Tazul Islam, Dr. Sajal Chandra Banik and Dr. Md. Sanaul Rabbi, Professor, ME dept., CUET, Bangladesh
ID 388 An Intelligent Cyber Physical System of Machining Operation for Industry 4.0
Md Shihab Shakur, Maishat Lubaba, Mir Wahidul Islam, Md. Saniat Kamal, M. Azizur Rahman, Md. Shahnawaz Bhuiyan, Department of Mechanical and Production Engineering Ahsanullah University of Science and Technology (AUST) Dhaka, Bangladesh
Md. Abdul Gaffur, Principal Scientific Officer, Pilot Plant and Process Development Centre Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka, Bangladesh
ID 389 A Case Study on an Approach to Minimizing Inventory Cost through categorization of Items and forecasting Uncertain Demand
Robin Saha, Esteak Ahmed, Md. Sazol Ahmmed, Fuad Ahmed Choyon, Department of Industrial & Production Engineering (IPE), Rajshahi University of Engineering & Technology (RUET), Rajshahi, Bangladesh
ID 396 Analysis & Comparative Study on Different Cooling Systems of Motorbike Engines and Implementation of Thermoelectric Generator (TEG) on the Exhaust System
Ahnaf Sadi, Department of Mechanical and Production Engineering, Islamic University of Technology – IUT, OIC, Gazipur, Bangladesh
Luthfun Nahar, Department of Mechanical & Mechatronic Engineering, UCSI University, Malaysia
ID 398 Mapping of Green Jobs Research Themes: A Review
Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
Nur Afia, Institute for Research and Community Services, Universitas Nahdatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Elsa Rosyidah, Environmental Engineering Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Robertus Tang Herman, Management Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
ID 400 Natural Gas Pipeline Failure Risk Consequences Modeling: A Potential Threat to the Airport and Its Surrounding Infrastructures
Sk Kafi Ahmed, Department of Industrial Systems Engineering, University of Regina Regina, Canada
Shahrukh Khan, School of Mechanical Manufacturing and Automation Engineering, Beihang University Beijing, P.R. China
Sumaiya Rahman, Department of Civil Engineering, University of Asia Pacific Dhaka, Bangladesh
Md Asifuzzaman Khan, School of Aerospace Engineering, Shenyang Aerospace University, Shenyang, P.R. China
ID 407 Green Product Overview Using the Bibliometric Mapping
Analysis
Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
Mega Firdaus, Institute for Research and Community Services, Universitas Nahdatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Elsa Rosyidah and Laily Noer Hamidah, Environmental Engineering Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
ID 408 Student Satisfaction Index on Lecturers Performance on Ambon State of Polytechnic
Sukanta, Universitas Singaperbangsa Karawang, Indonesia
Dian Utami Sutiksno, Department of Commercial Administration, Politeknik Negeri Ambon, Ambon, Indonesia
Agustinus Numberi, Faculty of Economic and Business, Universitas Cendrawasih, Papua, Indonesia
Andarias Patiran, Universitas Ottow Geissler, Papua, Indonesia
Johanis R. Wanma, Faculty of Economic and Business, Universitas Cendrawasih, Papua, Indonesia
ID 409 Competitive Advantage On Higher Education Study Program In Maluku – Indonesia (Case Study)
Irma Setyawati, Faculty of Economics and Busines, Management Study Program, Universitas Nasional, Jakarta, Indonesia
Dian Utami Sutiksno, Department of Commercial Administration, Politeknik Negeri Ambon, Ambon, Indonesia
Novalien. C. Lewaherilla, Faculty of Economic and Business, Department of Management, Universitas Pattimura Ambon, Indonesia
Naddynda PN, Faculty of Teacher Training and Education, English Education Study Programme, Universitas Pattimura Ambon, Indonesia
Victor Pattiasina, Universitas Yapis, Papua, Indonesia
ID 412 Supply Chain Risk Management Practices During Covid 19
In The Indonesian Manufacturing Industry On Supply Chain Robustness And Resilience
Muhammad Fadhilis Syakur, Department of Industrial Engineering, University of Indonesia, Jakarta, Indonesia
Farizal, Ph.D., Department of Industrial Engineering, University of Indonesia, Jakarta, Indonesia
ID 413 Marangoni Natural Convection in a Discretely Heated Cubic Cavity under Isoflux Heating Condition
HM Toufik Ahmed Zisan, Tahmidul Haque Ruvo and Sumon Saha, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
ID 414 CFD Study of Aerosol Particle Deposition in Converging-Diverging Nozzle
Md. Shahneoug Shuvo, Md Nazmus Sakib, Sumon Saha, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
ID 416 Conjugated Natural Convection Heat Transfer Inside a Heated Domed Porous Cavity Containing a Solid Cylinder
Sakib Javed, Tawsif Iqbal, Animesh Mitra and Sumon Saha, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
ID 417 Application of Delphi Technique in Predicting Total Quality Management Constructs in Ghanaian Construction Industry
Samuel Kwame Ansah, Department of Building Technology, School of Built and Natural Environment, Cape Coast Technical University, Cape Coast, Ghana
Department of Construction Management and Quantity Surveying, Faculty of Engineering and Built Environment, University of Johannesburg, Johannesburg, Gauteng, South Africa
Wellington Didibhuku Thwala and Clinton Ohis Aigbavboa, Department of Construction Management and Quantity Surveying, Faculty of Engineering and Built Environment, University of Johannesburg, Johannesburg, Gauteng, South Africa
ID 418 Influence of Organizational Factors on Total Quality
Management Implementation in the Ghanaian Construction
Industry
Samuel Kwame Ansah, Department of Building Technology, School of Built and Natural Environment, Cape Coast Technical University, Cape Coast, Ghana
Department of Construction Management and Quantity Surveying, Faculty of Engineering and Built Environment, University of Johannesburg, Johannesburg, Gauteng, South Africa
Wellington Didibhuku Thwala and Clinton Ohis Aigbavboa, Department of Construction Management and Quantity Surveying, Faculty of Engineering and Built Environment, University of Johannesburg, Johannesburg, Gauteng, South Africa
ID 420 Conjugate Mixed Convection in a Differentially Heated Square Cavity with a Rotationally Oscillating Solid Cylinder
A N M Fuhadul Islam, Riasat Islam, Md. Rakib Hossain and Sumon Saha, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka-1000, Bangladesh
ID 423 Combined Effect of Reynolds and Grashof Numbers on Mixed Convection Heat Transfer in Turbulent Pipe Flow
Kazi Afif Salam and Sumon Saha, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
ID 424 Assessment of Overall Thermal Performance of Conjugate Pure Mixed Convection in a Lid-Driven Partitioned Cavity
Sumon Saha, Mir Atiqur, Md Alif Mahmud and R. K. B. M. Rizmi, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka 1000, Bangladesh
ID 426 Modern Monetary Theory: Academic Insights from
Scientometric Analysis Visualizing
Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
Nur Asitah, Institute for Research and Community Services, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Riyan Sisiawan Putra, Management Department, Nahdlatul Ulama University of Surabaya, Surabaya 60237, Indonesia
Budi Wahyu Mahardhika, Management Department, Universitas Muhammadiyah Surabaya, Surabaya 60113, Indonesia
ID 428 Design of a Plant for the Treatment, Management and Reuse of Water Collected in Septic Tanks. Case Study: Harare Company
Rutendo A. Nengwe, Department of Industrial and Mechatronics Engineering, University of Zimbabwe, Mt Pleasant, Harare, Zimbabwe
Loice K. Gudukeya, Faculty of Engineering & the Built Environment, University of Johannesburg, Johannesburg, South Africa
Roy N. Mushonga, Department of Industrial and Mechatronics Engineering, University of Zimbabwe, Mt Pleasant, Zimbabwe
ID 430 Evaluating the Flexibility Dimensions in a Supply Chain by Developing a Decision-Making Framework Through FuzzyTOPSIS Approach
A. B. M. Abdul Malek, Md. Farhad Hossain, and Md. Aminul Islam Tuhin, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
ID 435 Exploration of Parents Purchase Decisions for Child Snacks
Gabriella Debora Oemar Said, Kukuh Lukiyanto, R. Aditya Kristamtomo Putra, and Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
ID 436 Sustainable Development Goals in ASEAN: A Publication
Mapping through Scientometric Perspective
Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
Andre Septianto, Chemical Engineering Department, Universitas Nahdatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Elsa Rosyidah, Environmental Engineering Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Muhammad Muharrom Al Haromainy, Information Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
ID 440 Heuristic Optimization for Job Shop Scheduling in a Flexible Manufacturing System
Hisham Alkhalefah, Institute, King Saud University, Riyadh Advanced Manufacturing, 11421, Saudi Arabia
Usama Umer, Institute, King Saud University, Riyadh Advanced Manufacturing, 11421, Saudi Arabia
Mustufa Haider Abidi, Institute, King Saud University, Riyadh Advanced Manufacturing, 11421, Saudi Arabia
Ahmed Elkaseer, Department of Production Engineering and Mechanical Design Faculty of Engineering, Port Said University, Port Said, 42523, Egypt
Institute for Automation and Applied Informatics, Karlsruhe Institute of Technology, Karlsruhe, 76344 Germany
ID 442 The Determination of Cost of Goods Sold with Full Costing Method: A Case Study of Waste Recycling Company
Arizqi Kurnia Septin, Kafidin Muzakki, Erlyna Tri Rohmiatun, Dian Fahriani, Mohammad Taufiq, and Chairil Anwar, Accounting Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Nur Asitah, Institute for Research and Community Services, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
ID 443 Internal Control Effectiveness: A Case Study on Drug
Supply in A Health Clinic
Mila Inggarta, Chairil Anwar, Kafidin Muzakki, Mohammad Taufiq, Dian Fahriani, and Erlyna Tri Rohmiatun, Accounting Department
Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Nur Asitah, Institute for Research and Community Services, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
ID 444 New Analytical Model for Load distribution and Pitting
Stress analysis of a Spur Gear on Lathe Machine
Khin Khin Thant, Department of Mechanical Engineering, Yangon Technological University (YTU), Yangon, Myanmar
Than Than Htike, Department of Mechanical Engineering, Yangon Technological University (YTU), Yangon, Myanmar
ID 445 Developing and Implementing Classroom Optimization Model
Dr. Azizur Rahman, Faculty of Science Engineering and Technology, Swinburne University of Technology, Melbourne, Victoria, Australia
Ahnaf Tahmid and Mohammad Farhan Akif, Department of Industrial Engineering and Management, Khulna University of Engineering & Technology, Khulna- 9203, Bangladesh
ID 448 Facility Planning in the Context of Industry 4.0 – A Review
M.B. Kiran, Associate Professor, Department of Mechanical Engineering, School of Technology, Pandit Deendayal Energy University, Gandhinagar, Gujarat, INDIA
ID 450 Mapping and Localization in 3D Space for Vision-based Robot Manipulation
Md Tanzil Shahria and Md Samiul Haque Sunny, Department of Computer Science, University of Wisconsin-Milwaukee, Wisconsin, United States
Md Ishrak Islam Zarif and Sheikh Iqbal Ahamed, Department of Computer Science, Marquette University Wisconsin, United States
Mohammad H. Rahman, Department of Mechanical Engineering, University of Wisconsin-Milwaukee, Wisconsin, United States
ID 451 Effect of Metabolic Heat Generation and Ambient Temperature on the Body Temperature – A Finite Element Study
Kanta Das Purkaysta and A M M Mukaddes, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology
Sylhet, Bangladesh
ID 453 Comparing Safety Risk Identification in the Manufacturing and Non-Manufacturing Industry: Systematic Literature Review
Haryadi Sarjono, BINUS Business School, Undergraduate, Universitas Bina Nusantara Jakarta, Indonesia
Dalinsyah Danil, Industrial Engineering, Bina Nusantara University Jakarta, Indonesia
Heppy Yohanes, Sekolah Tinggi Teologi Bethel The Way (STTB The Way), Jakarta, Indonesia
Kornelius Rulli Jonathans, Sekolah Tinggi Teologi Bethel The Way (STTB The Way), Jakarta, Indonesia
ID 454 Systematic Literature Review: Angklung As Cultural Manifestation
Haryadi Sarjono, BINUS Business School, Undergraduate, Universitas Bina Nusantara Jakarta, Indonesia
Puji Lestari, Sekolah Tinggi Ilmu Ekonomi Bisnis Indonesia (STIEBI), Jakarta, Indonesia
Heppy Yohanes, Sekolah Tinggi Teologi Bethel The Way (STTB The Way), Jakarta, Indonesia
Kornelius Rulli Jonathans, Sekolah Tinggi Teologi Bethel The Way (STTB The Way), Jakarta, Indonesia
ID 455 Supply Chain Performance Measurement Using The Supply Chain Operation Reference Model (Scor Model) Approach In The Food Industry Study Literature Review
Haryadi Sarjono, Management Departement, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia
Chrisaldy Diwanda Markus Pattiapon, Management Departement, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta, Indonesia
Heppy Yohanes, Sekolah Tinggi Teologi Bethel The Way (STTB The Way), Jakarta, Indonesia
ID 456 Design and Development of Robotic Manipulator and Conveyor System for Automated Industrial Process
Shamim Ahmed, S. M. Mahabub Ul Alam Shuvo, Muammer Din Arif, Department of Mechanical Engineering (ME), Military Institute of Science and Technology (MIST), Dhaka, Bangladesh
ID 457 The Role of Education in Preparing the Young Generation
for the Era of the ASEAN Economic Community
Fransisca Dwi Harjanti and Anik Kirana, Teacher Professional Education Department, Universitas Wijaya Kusuma Surabaya, Indonesia
Lusy Tunik Muharlisiani, English Language Education Department, Universitas Wijaya Kusuma Surabaya, Indonesia
Marmi, Biology Education Department, Universitas Wijaya Kusuma Surabaya, Indonesia
Friendha Yuanta, Primary Teacher Education Department, Universitas Wijaya Kusuma Surabaya, Indonesia
ID 458 Mapping of Linguistic Diversity Research Themes: A
Review
Mega Firdaus, English Language Education Department, Universitas Nahdatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Elsa Rosyidah, Environmental Engineering Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Hadi Ismanto, Basic Education Department, Universitas Negeri Malang
Malang 61218, Indonesia
Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
ID 459 Business Development Strategy Formulation: Lessons Learned from Body Care Startup
Rintany Zulfah Khoyriyah and Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
ID 463 Systematic Literature Review: Perceptions and Interest of Tourist Visitor on the Online Art of The Ramayana Ballet Art
Haryadi Sarjono, BINUS Business School Undergraduate, Bina Nusantara University, Jakarta, Indonesia
Dian Kusmawati, Sekolah Tinggi Ilmu Ekonomi Bisnis Indonesia, Jakarta, Indonesia
Heppy Yohanes, Sekolah Tinggi Teologi Bethel The Way, Jakarta, Indonesia
ID 464 A Study of TESOL in ASEAN Using Scientometric Mapping
Approach
Nur Afia and Nuzula Firdausi, English Language Education Department
Universitas Nahdatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Elsa Rosyidah, Environmental Engineering Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Fatkul Anam, Teacher Professional Education Department, Universitas Wijaya Kusuma Surabaya, Surabaya 60225, Indonesia
Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
ID 466 Value of Biorefinery Research Mapping: A Scientometric Overview
Andre Septianto, Chemical Engineering Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Elsa Rosyidah, Environmental Engineering Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
ID 468 Mapping The Intellectual Structure of Educational Linguistics Research
Nuzula Firdausi and Nur Afia, English Language Education Department
Universitas Nahdatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Fatkul Anam, Teacher Professional Education Department, Universitas Wijaya Kusuma Surabaya, Surabaya 60225, Indonesia
Kaswadi, Teacher Professional Education Department, Universitas Wijaya Kusuma Surabaya, Surabaya 60225, Indonesia
Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
ID 470 Effect of Front Right Toe-out Angles on Fuel Consumption for a Light Vehicle
Riton Kumer Das, Md. Abu Mowazzem Hossain, Md. Tazul Islam and Banik Sajal Chandra, Department of Mechanical Engineering, Chittagong University of Engineering and Technology, Chattogram, Bangladesh
ID 471 Marketing Services for Potato Export Potential in Indonesia
Haryadi Sarjono, Management Departement, BINUS Business School Undergraduate Program Bina Nusantara University Jakarta, Indonesia
Heppy Yohanes, Sekolah Tinggi Teologi Bethel The Way (STTB The Way), Jakarta, Indonesia
ID 472 From Analysis to Strategy Formulation for Apparel Startup
Narendra Bagaskara Esya Putra and Agung Purnono, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
ID 475 Evaluation Of Instant Noodle Packaging Quality Using Failure Mode And Effect Analysis Method
Nina Aini Mahbubah, Rendra Rahmatulloh, Department of Industrial Engineering – Engineering Faculty
Universitas Muhammadiyah Gresik (UMG), Jl. Sumatera 101 GKB Gresik, Jawa Timur – Indonesia 61121
Abdul Muid, Department of Industrial Engineering – Engineering faculty, Universitas Negeri Malang (UM), Jl. Semarang no 5 Jawa Timur – Indonesia 65145
ID 476 Sales Display Re-layout Based on Analysis of Item Sets Pattern Using Combination of Complete Linkage Hierarchical Clustering Method and Association-Rule Method with Apriori Algorithm
Selvia Putri Andriani, Aisyah Larasati, Abdul Muid, Industrial Engineering, Faculty of Engineering, Universitas Negeri Malang, Jl. Semarang No. 5 Malang, Indonesia 65145
Nina Aini Mahbubah, Industrial Engineering Department, Engineering Faculty, Universitas Muhammadiyah Gresik, Jl Sumatera 101 GKB Gresik, Indonesia 61121
ID 477 Insights into Business Strategy: Formulation of Export Entrepreneurship
Agung Purnomo, Annisa Dina Shalsabilla Sugiantoro, Nazaria Jotur Siregar, and Febby Candra Pratama, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
ID 479 Inclusive Education Research Mapping in ASEAN: Lesson
from Scientometric Perspective
Nur Asitah, Primary Education Departement, Universitas Negeri Malang
Malang 65145, Indonesia
Syamsul Hadi, Primary Education Departement, Universitas Negeri Malang
Malang 65145, Indonesia
Abdur Rahman Asari, Mathematics Departement, Universitas Negeri Malang, Malang 65145, Indonesia
Shirly Rizki Kusumaningrum, Primary Education Departement, Universitas Negeri Malang, Malang 65145, Indonesia
Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
ID 481 Business Strategy of Trading Company: Analysis and Formulation
Agung Purnomo, Dian Markus Tambunan, Megawati Sundoro Putri, Averina Cindy Setio, and Febby Candra Pratama, Entrepreneurship Department, BINUS Business School Undergraduate Program
Bina Nusantara University, Jakarta 11480, Indonesia
ID 483 Case Study of Enterprise Resource Planning System
Implementation in Small Medium Business
Rizky Aditya Nugroho, Awang Andhyka, Catur Lega Wibisono, Syahri Mu’min, Arief Saputro, Vivi Izzah Nur Kholifah, Information Systems Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
ID 484 Student Discipline Information System Nahdlatul Ulama University, Sidoarjo Using The Knn Method
Arief Saputro, Awang Andhyka, Syahri Mu’min, Rizky Aditya Nugroho, Catur Lega Wibisono, Achmad Alif Ubaidillah, Information Systems Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
ID 486 Significance of Ergonomics in Manufacturing Companies – A Review
Vaibhav Kalpesh Desai, Department of Mechanical Engineering, Pandit Deendayal Energy University (PDEU), Gandhinagar, Gujarat
Dr. M B Kiran, Department of Mechanical Engineering, Pandit Deendayal Energy University (PDEU), Gandhinagar, Gujarat
ID 487 Eco-Pesantren: Islamic Boarding School Transformation
Program to Support Natural Sustainability and Sustainable Development
Wahyu Eko Pujianto, Ayu Lucy Larassaty, Muhafidhah Novie, and Laily Muzdalifah, Management Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Elsa Rosyidah, Institute for Research and Community Services, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
ID 488 Kinematics and Workspace Analysis of xArm6 Robot for
Activities of Daily Living
Elias Munoz, Md Samiul Haque Sunny, Ivan Rulik, Javier D. Sanjuan De Caro, and Mohammad H. Rahman, Department of Mechanical Engineering, University of Wisconsin-Milwaukee, Milwaukee, USA
ID 492 Bibliometric Analysis of Tourism Industry Resilience through Immersive Media During Pandemic
Trias Widha Andari, Visual Communication Design Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Athika Dwi Wiji Utami, Visual Communication Design Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Sonhaji Arif, Visual Communication Design Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo 61218, Indonesia
Putra Uji Deva Satrio, Visual Communication Design Department, Universitas Nahdlatul Ulama Sidoarjo, Sidoarjo, Indonesia
ID 493 Driving Competing Analysis: A Case Study
Muhammad Ahmed Kalwar, Post Graduate Alumini (MUET) & Assistant Manager Production, Shafi Private Limited, Lahore, Punjab, Pakistan
Shakeel Ahmed Shaikh, Associate Professor & Co-director (Post Graduate Studies), Department of Industrial Engineering & Management, Mehran UET, Jamshoro, 76062, Sindh, Pakistan
Muhammad Ali Khan, Post Graduate Student & Assistant Professor, Department of Industrial Engineering & Management, Mehran UET, Jamshoro, 76062, Sindh, Pakistan
ID 494 Online Banking`S Infrastructural Challenges: Detailed Analysis In Customers` Perspective Across Gender And Availability Of Internet
Mehmood Ali Gul, Post Graduate Student, Muhammad Ali Jinnah University (MAJU), Karachi, Sindh, Pakistan.
ZartashiaKiran Imran, Assistant Professor, Department of Management Sciences, Muhammad Ali Jinnah University (MAJU), Karachi, Sindh, Pakistan.
Muhammad Ahmed Kalwar, Post Graduate Student Alumini (MUET) & Assistant Manager (Production), Shafi Private Limited, Lahore, Punjab, Pakistan
Muhammad Ali Khan, Post Graduate Student & Assistant Professor, Department of Industrial Engineering & Management, Mehran UET, Jamshoro, 76062,Sindh, Pakistan
ID 495 Productivity Improvement by Lean Methodologies at Dyeing & Printing Plant
Nadal Jaleel, Under Graduate Final Year Student & Group Leader, Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Muhammad Ali Khan, Assistant Professor & PhD Scholar (Supervisor), Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Muhammad Jamal, Under Graduate Final Year Student & Group Member, Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Muhammad Safeeruddin, Under Graduate Final Year Student & Group Member, Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Muhammad Musab Shajee, Under Graduate Final Year Student & Group Member, Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Usama Mughal, I.E Executive Engineer (External Supervisor), Department of Industrial Engineering, Mustaqim Dyeing & Printing (Pvt) Ltd, S.I.T.E, Karachi, 75700, Sindh, Pakistan
ID 496 Investigation of Seven Wastes Relationships in Textile Industry by Lean Manufacturing Technique of Waste Relations Matrix (WRM)
Muhammad Ali Khan, Assistant Professor & PhD Scholar, Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Awaiz Khatri, Associate Professor, Department of Textile Engineering, Mehran University of Engineering & Technology, Jamshoro, 76062, Jamshoro, Sindh, Pakistan.
Hussain Bux Marri, Meritorious Professor & Dean of Technology, Department of Mechanical Engineering, Benazir Bhutto Shaheed University of Technology & Skill Development (BBSUTSD), Khairpur Mirs, Sindh, Pakistan.
ID 497 Productivity Improvement of Garments Industry by Assembly Line Technique of Lean Manufacturing
Zohaib Iftikhar, Under Graduate Final Year Student & Group Leader, Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Muhammad Ali Khan, Assistant Professor & PhD Scholar (Supervisor),
Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Ramesh Kumar, Under Graduate Final Year Student & Group Member,
Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Karim Bux, Under Graduate Final Year Student & Group Member, Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
Abdul Haseeb, Under Graduate Final Year Student & Group Member, Department of Industrial Engineering & Management, Mehran University of Engineering & Technology, Jamshoro, 76062, Sindh, Pakistan
ID 499 Influence of Fiber Orientation on the Tensile and Flexural Properties of Jute Fiber Reinforced Polymer Composites
Pranto Karua, Md. Arifuzzaman, Department of Mechanical Engineering (ME), Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh
ID 501 Women Consumer Online Purchase Decision Making on Body Care Products: Analysis of Influencing Factors
Hanisavila Putri Widoriantika and Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
ID 503 Developing Alternative Business Strategy: Analysis and Formulation Process in Distribution Company
Febby Candra Pratama, Priscilla Eka Febriana, Chelsea Aisiyah Ramadhan, Syani Tanhar and Agung Purnomo, Entrepreneurship Department, BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
ID 504 Building Alternative Strategies in Pharmacies: Analyze, Formulate, and Priority Determination
Febby Candra Pratama, Griselda Angelin L Wangi, Jeannyfer Gladys Violetta, Cindy Monica, and Agung Purnomo, Entrepreneurship Department BINUS Business School Undergraduate Program, Bina Nusantara University, Jakarta 11480, Indonesia
ID 506 Simulation on Mechanical Heart valve: Generative Design and Blood Flow Analysis of a Mechanical Heart Valve
Sajjad Ahmed, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Maisha Tarannum, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Md. Shahriar, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Aquib Rahman, Lecturer, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
ID 508 Distribution of COVID-19 Personal Protective Equipment by California County Population
Kayla Akey, Masters of Engineering Management Program, A. Leon Linton Department of Mechanical, Robotics, and Industrial Engineering, Lawrence Technological University, Southfield, MI 48075, USA
Ahad Ali, Ph.D., Associate Professor and Director of Industrial Engineering, A. Leon Linton Department of Mechanical, Robotics and Industrial Engineering, Lawrence Technological University, Southfield, Michigan, MI 48075, USA
ID 516 Simulation Analysis of Brake Lining Manufacturing
Karthik Dhandapani, Master of Science in Industrial Engineering, A. Leon Linton Department of Mechanical, Robotics and Industrial Engineering, Lawrence Technological University, Southfield, MI 48075, USA
Ahad Ali, Ph.D., Associate Professor and Director of Industrial Engineering, A. Leon Linton Department of Mechanical, Robotics and Industrial Engineering, Lawrence Technological University, Southfield, Michigan, MI 48075, USA
ID 517 Simulation Analysis of Ordering and Managing System Of Cricket Set
Vishesh M. Joshi, Master of Science in Industrial Engineering, Lawrence Technological University, Southfield, MI 48075, USA
Ahad Ali, Ph.D., Associate Professor and Director of Industrial Engineering, A. Leon Linton Department of Mechanical, Robotics and Industrial Engineering, Lawrence Technological University, Southfield, Michigan, MI 48075, USA
ID 523 An IoT Integrated Cybernetic System for Machine Control Operations on Industry 4.0
Abdullah All Mamun Anik, Department of Industrial and Production Engineering (IPE), Military Institute of Science and Technology (MIST), Dhaka, Bangladesh
Shuvodip Adhikary, Department of Industrial and Production Engineering (IPE), Military Institute of Science and Technology (MIST), Dhaka, Bangladesh
Md. Istiak Habib, Department of Industrial and Production Engineering (IPE), Military Institute of Science and Technology (MIST), Dhaka, Bangladesh
Dr. Abdul Gafur, Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhanmondi, Dhaka, Bangladesh
ID 528 Investigation of Control Factors for Water Absorption of Natural Fiber Reinforced Composite
Md. FirozKabir and Md. Mosharraf Hossain, Department of Industrial and Production Engineering, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh
ID 529 Scenario of Implementation of Lean Six-Sigma in Ready-made Garment Manufacturing Industry of Bangladesh
Shanjoy Chowdhury and Md. Mosharraf Hossain, Department of Industrial and Production Engineering, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh