Proceedings – IMEOM 2022 Dhaka Conference
Dhaka, Bangladesh, December 26-28, 2022
ISSN 2691-7734 (print) ISSN 2691-7726 (online) ISBN: 979-8-3507-0541-6
ID 25 Risky Business: A Real Options Valuation for Biopower Investments in sub-Saharan Africa
June Levi-Oguike, Diego Sandoval, Etienne Ntagwirumugara, African Centre of Excellence in Energy for Sustainable Development (ACE-ESD),College of Science & Technology(CST), University of Rwanda, Kigali, Rwanda
Sajib Ahmed, MD. Ibrahim and Md. Ariful Haque, Department of Industrial and Production Engineering (IPE), Rajshahi University of Engineering and Technology, Rajshahi, Bangladesh
Abir Debnath and Syed Arif Mahabub, Department of Industrial and Production Engineering (IPE), National Institute of Textile Engineering & Research, Dhaka, Bangladesh
Md. Mahraj Uddin, Department of Industrial & Production Engineering (IPE), Shahjalaj University of Science and Technology, Sylhet, Bangladesh
ID 31 Edge Colouring Process Improvement by DMAIC Methodology – Efficiency Perspective
Md. Sajib Milki, Department of Industrial Engineering (IE), BGMEA University of Fashion & Technology (BUFT), Dhaka, Bangladesh
Department of Industrial and Production Engineering (IPE), Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
Nuzhat Tabassum Nishat, Department of Computer Science & Engineering (CSE), Uttara University (UU)
Uttara, Dhaka, Bangladesh
Farzad Hossain, Department of Mechanical and Production Engineering (MPE), Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
Anik Chandra Dash, Hany Osman, Ahmed Azab, Production & Operations Management Research Lab, University of Windsor, Canada
Fazle Baki, Odette School of Business, University of Windsor, Canada
Ashiqur Rahman and Sheikh Mohammad Shavik, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
ID 40 Efficiency of Inventory Management for Residual Vaccines of Covid-19
Hyungju Kim and Taesu Cheong, School of Industrial and Management Engineering, Korea University, Seoul, South Korea
ID 41 Optimum Location Selection of University of Thakurgaon
Md. Mehedi Hasan, Md Arik Arshad Anik and Md. Sazol Ahmmed, Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology (RUET), Rajshahi-6204, Bangladesh
Juan Carlos Herrera Vega, Departamento de Ingeniería Industrial, Fundación Universitaria Tecnológico Comfenalco, Cartagena de Indias, Colombia
ID 43 Studying the Application of VSM as a Lean Tool in a Healthcare Facility
Engr Mohammed Abdul Karim, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
Tarequl Islam, Supply Chain Management, Avery Dennison Bangladesh, Dhaka EPZ, Savar, Dhaka, Bangladesh
ID 44 Sustainable Supply Chain in Textile Industry
Mohammed Raihan Uddin and Md Mamunur Rashid, Department of Industrial & Production Engineering, Bangladesh University of Textiles, Dhaka-1208, Bangladesh
ID 46 Simulation of an Energy Saving Egg Incubator
Md. Mizanur Rahman and Robin Barua, Institute of Energy Technology, Chittagong University of Engineering & Technology (CUET), Chattogram, Bangladesh
Md. Tazul Islam, Department of Mechanical Engineering, Chittagong University of Engineering & Technology (CUET), Chattogram, Bangladesh
Nur Mohammad, Department of Electrical and Electronic Engineering, Chittagong University of Engineering & Technology (CUET), Chattogram, Bangladesh
ID 47 Simulation and Modeling of an Energy Saving Electro-Hydraulic Power Steering System
Robin Barua and Md. Mizanur Rahman, Institute of Energy Technology, Chittagong University of Engineering & Technology (CUET), Chattogram, Bangladesh
Md. Tazul Islam and Syed Masrur Ahmmad, Department of Mechanical Engineering, Chittagong University of Engineering & Technology (CUET),lChattogram, Bangladesh
Rasel Sen and Saswata Dutta, Department of Electrical and Electronic Engineering, Premier University
Chattogram, Bangladesh
ID 48 A Sustainable and Economic Approach towards Shoulder Tape Joining in T-Shirt
Habibur Rahman Anik, Abir Hassan and Sazid Elahi, Department of Apparel Engineering, Textile Engineering Management, Apparel Engineering, Bangladesh University of Textiles, Tejgaon Industrial Area, Dhaka, Bangladesh
Mohammad Ishaque, Department of Textile Engineering, BGMEA University of Fashion & Technology
Nishatnagar, Turag, Dhaka, Bangladesh
Rony Kumar Shill, Cotton Field BD Ltd., Dhaka, Bangladesh
Atashee Dey Rishti, Department of Apparel Engineering, Bangladesh University of Textiles, Tejgaon Industrial Area, Dhaka, Bangladesh
Sumaiya Tabassum, Department of Apparel Engineering, Bangladesh University of Textiles, Tejgaon Industrial Area, Dhaka, Bangladesh
ID 49 An Incineration Method to Produce Energy from Waste in Rajshahi City, Bangladesh
Tauhid Al Hasan Evan, Ahtashamul Haque and Toukir Ahmed, Department of Industrial and Production Engineering (IPE), Rajshahi University of Engineering & Technology (RUET), Rajshahi, Bangladesh
Md. Ariful Islam, Md. Bodruzzaman Sifat and Fazlay Rabbi Mridu, Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology (RUET), Rajshahi-6204, Bangladesh
ID 51 Design and Construction of an Obstacle Avoiding Line Follower Luggage Carrying Robot
Jowad Md Madha, Anika Nawar, Enamul Hoq, Department of Mechatronics Engineering, Faculty of Science and Engineering, World University of Bangladesh, Avenue 06 Lake Drive, Sector 17H, Uttara, Dhaka, Bangladesh
Mark Loel Badilla, Christian De Leon, Bernard Lamsin, Nicole Makiyama, Joshua Pabilan, John Michael Vigilla, Department of Industrial Engineering, College of Engineering and Architecture, Technological Institute of the Philippines – Quezon City, Cubao, Quezon City, Philippines
Md. Ariful Islam, Muhammad Mohi Uddin and Fairuz Nawer, Department of Industrial and Production Engineering (IPE), Rajshahi University of Engineering & Technology (RUET), Rajshahi, Bangladesh
Girlie America, Mary Leinel De Palma, Fiona Mae Demalata, Robert Ryan Denila, Bheatrixe lnocencio, Sharmae Jayne Oblino and Romalyn Galingan, Department of Industrial Engineering, College of Engineering and Architecture, Technological Institute of the Philippines – Quezon City, Cubao, Quezon City, Philippines
Kevin Arman Ramos, Senior High School Department, Technological Institute of the Philippines – Quezon City, Cubao, Quezon City, Philippines
Tamanna Islam, Fariha Rahnuma and Md. Sazol Ahmmed, Department of Industrial & Production Engineering (IPE), Rajshahi University of Engineering & Technology (RUET), Rajshahi
ID 61 A Study to Propose an Optimized Home Load Energy Management System by Dwelling Model Using Informative Control Module
Sarkar Sudipta Shekhar Supta, Md. Arafat UlFerdoush and Sonia Akhter, Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology (RUET), Rajshahi – 6204, Bangladesh
ID 63 Design of a Bluetooth Controlled Food Delivery Waiter Robot for Restaurants
Jowad Md Madha, Anika Nawar, Md Mahmudul Hasan and Dr. Md Mizanur Rahman, Department of Mechatronics Engineering, Faculty of Science and Engineering, World University of Bangladesh, Avenue 06 Lake Drive, Sector 17H, Uttara, Dhaka, Bangladesh
Tarequl Islam, Supply Chain Management, Avery Dennison Bangladesh, Savar, Dhaka
ID 68 Design and Fabrication of a Shaft Drive Bicycle
Md. Nahidul Islam and Md. Rakibuzzaman, Department of Mechanical Engineering, International University of Business Agriculture and Technology (IUBAT), Dhaka, Bangladesh
ID 69 Phosphate Recovery from Sewage Sludge for Application as a Substitute to Phosphate Rock
M. Manyuchi and N. Sukdeo, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 72 Design of a Quick Acting Braking System for Vehicle Safety Enhancement
Joydev Karmakar Rahul, Souvik Chakraborty, Nabila Khayer, Md. Sazol Ahmmed, Ar-Rafi Hriday, Md. Limon Mia and Khairun Nahar, Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology, Kazla, Rajshahi-6204, Bangladesh.
ID 73 Considerations in the Design of an Efficient Network to Transport Perishable Crops
Joydev Karmakar Rahul, Souvik Chakraborty, Nabila Khayer, Md. Foysal Uddin and Maliha Rajwana Haque , Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology, Kazla, Rajshahi-6204, Bangladesh
Fitriani Surayya Lubis, Misra Hartati, Nofita Putri Rahmadhani, and Melfa Yola, Department of Industrial Engineering, Islamic State University of Sultan Syarif Kasim Riau, Pekanbaru, Indonesia
Rotan Kumar Saha and Faisal Mahmud, Department of Industrial and Production Engineering, Dhaka University of Engineering and Technology, Gazipur 1700, Bangladesh
ID 93 Servitization of Business Strategy Using Lean Six Sigma Approach
Firqi Abdillah and Zulkarnain, Faculty of Industrial Engineering, Universitas Indonesia, Depok 16424, Indonesia
ID 94 Stereolithography 3D Printing of Bagasse Reinforced Composites
Kazi Ahasan Ekram, Rakibul Hasan Raihan and Nabil Chowdhury, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Md. Ershad Khan, Associate Professor, Department of Textile Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Dr. M. Azizur Rahman, Assistant Professor, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Dr. Md. Shahnewaz Bhuiyan, Associate Professor, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
ID 95 Effect of NaOH Concentration on 3D Printed Bagasse Reinforced Composite Material
Rakibul Hasan Raihan, Nabil Chowdhury, Kazi Ahasan Ekram, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Nabil Chowdhury, Kazi Ahasan Ekram, Rakibul Hasan Raihan, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Md. Ershad Khan, Associate Professor, Department of Textile Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Dr. M. Azizur Rahman, Assistant Professor, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Dr. Md. Shahnewaz Bhuiyan, Associate Professor, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
ID 106 Sustainable Approaches Towards Renewing Discarded Vehicle Tyre Rubbers
Mohammad Momeen Ul Islam, Civil & Infrastructure Engineering, School of Engineering, RMIT University, Melbourne, Australia
Md Zisanul Haque Bhuiyan and Dr. Shuva Ghosh, Department of Industrial and Production Engineering (IPE), Bangladesh University of Engineering & Technology (BUET), Dhaka-1000, Bangladesh
Mohammad Rakibul Hasan Chowdhury, Department of Process Technology, University of South-Eastern Norway, Notodden, Norway
ID 109 A Numerical Study for Fluid Flow around Different Shapes Of Bridge Pier
Anwar Ahmad Siddiquee and Mohammad Jalal Ahammad, Department of Mathematics, University of Chittagong, Chattogram, Bangladesh
Tasnima Zannat, Assistant Professor, Department of Civil Engineering, Southern University Bangladesh
Sayma Akhter, Assistant Professor, Department of Civil Engineering, Southern University Bangladesh
Utpal Das, Student, southern University Bangladesh, Southern University Bangladesh
ID 113 Design, Fabrication, and Analysis of a Prototype Electric Bike
Fahim Foysal Arnob and Md Shahnewaz Khan, Department of Mechanical Engineering, MIST, Bangladesh
ID 114 An Intelligent Hybrid Manufacturing System for Surface Quality Monitoring with Industry 4.0
Pervez Hossain, Fahim Al-Rashid Chowdhury and SM Rahaman, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Md Shihab Shakur, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
Dr. M. Azizur Rahman and Dr. Md Shahnewaz Bhuiyan, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
ID 116 An Artificial Bee Colony Algorithm for Assembly Line Worker Assignment and Balancing Problem
Aslihan Karas Celik and Feristah Ozcelik, Department of Industrial Engineering, Eskişehir Osmangazi University, Eskişehir, Turkey
Shanjoy Chowdhury, Md. Asadujjaman and Md. Mosharraf Hossain, Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh
ID 118 Spatial Analysis of Road Traffic Accidents Between Tunisian Regions
Ouni Fedy, Department of Transportation and Logistics, Higher Institute of Transport and Logistics of Sousse, University of Sousse, Tunisia
Attig Ines, Department of Economics, Faculty of Economic Sciences and Management of Sousse, University of Sousse, Tunisia
Attig Imen, Engineering Department, Drone Xperts, Quebec, Canada, 101-2059 Av. Branly, Québec, QC G1N 4C7, Environment Department, National Institute of Scientific Research of Québec (INRS), Canada
ID 119 Analyzing Musculoskeletal Disorders in Farmers Involved in Cultivation of Rice in Selected Villages of Bangladesh
Mohammad Iqbal, Rafid Ahmed Chowdhury and Md. Isfar Khan, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
Dhananjoy Banik Joy, Sumon Kumar Pramanik Joy, Sanjay Kushal Biswas and Dr. Aloke Kumar Mozumder, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka-1000, Bangladesh
Arafath Mohiv, Md Amjad Hossain Khan and Jonaed Hossain, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Azizur Rahman, Assistant Professor, Department of Mechanical and Production Engineering Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Md. Ershad Khan, Associate Professor, Department of Textile Engineering Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Dr. Mad. Shahnawaz Bhuiyan, Associate Professor, Department of Mechanical and Production Engineering Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
ID 123 A Possibility Degree Method for Ranking A Selected Supplier
Oumaima Zarhaoui, Achraf Haibi, Khalid El Yassini, IA Laboratory, Faculty of Sciences Meknes, Moulay Ismail University, Meknes, Morocco
Kenza Oufaska, LERMA Laboratory, College of Engineering & Architecture, International University of Rabat, Rabat, Morocco
Mustapha Oudani, TIC Lab Laboratory, College of Engineering & Architecture, International University of Rabat, Rabat, Morocco
ID 124 Impact of Big Data analytics on Supply Chain functions
Haloui Doha, IA Laboratory, Faculty of Sciences Meknes, Moulay Ismail University, Meknes, Morocco, LERMA Laboratory, College of Engineering & Architecture, International University of Rabat, Rabat, Morocco
Kenza Oufaska, LERMA Laboratory, College of Engineering & Architecture, International University of Rabat, Rabat, Morocco
Mustapha Oudani, TICLab Laboratory, College of Engineering & Architecture, International University of Rabat, Rabat, Morocco
Khalid El Yassini, IA Laboratory, Faculty of Sciences Meknes, Moulay Ismail University, Meknes, Morocco
Md Amjad Hossain Khan, Jonaed Hossain and Arafath Mohiv, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Azizur Rahman, Assistant Professor, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Md. Ershad Khan, Associate Professor, Department of Textile Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Dr. Mad. Shahnawaz Bhuiyan, Associate Professor, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
ID 126 Effect of the Deposition Layer Three-Dimensional Printed Jute Fiber Reinforced Composite
Jonaed Hossain, Arafath Mohiv and Md Amjad Hossain Khan, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Azizur Rahman, Assistant Professor, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Md. Ershad Khan, Associate Professor, Department of Textile Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Dr. Mad. Shahnawaz Bhuiyan, Associate Professor, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Md. Mahmudul Hasan, Sumiya Shahria and Md. Habib Ullah, Department of Mechatronic Engineering, Khwaja Yunus Ali University, Enayetpur, Sirajganj, Bangladesh
Md. Mizanur Rahman, Department of Mechatronics Engineering, World University of Bangladesh, Uttara, Dhaka, Bangladesh
ID 128 Mechanical Properties of Chemically Extracted Bagasse Fiber
Md. Ershad Khan, Associate Professor, Department of Textile Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Azizur Rahman and Dr. Md. Shahnewaz Bhuiyan, Assistant Professor, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Md. Nasif Ul Hossain, Azhar Mahmud and Mir Ahasan Ahmed, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Anik Mazumder, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
Banna Rani Das, Department of Civil Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
Dr. Ferdous Sarwar, Professor and Head of the Department, Industrial and Production Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
ID 131 Ecofriendly Design and Development of Bladeless Air Conditioning Fan
Md. Sazzat Hossain, Md. Nehal Hossen, Md. Nasif Hossain, Nayeem Uddin, Mashayek Mahbub, Md. Sazol Ahmmed, Md. Ariful Haque, Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology, Rajshahi-6204, Bangladesh
Rotan Kumar Saha, Md. Sohel Rana, and Md. Shazzad Hossain, Department of Industrial and Production Engineering, Dhaka University of Engineering and Technology, Gazipur, Bangladesh
Koki Kitabayashi, Department of Industrial Engineering and Management, Graduate School of Engineering, Kanagawa University, Kanagawa, Japan
Kazuki Ota and Hideki Katagiri, Department of Industrial Engineering and Management, Faculty of Engineering, Kanagawa University, Kanagawa, Japan
Yasunori Iwata, Department of Industrial Engineering and Management, Graduate School of Engineering, Kanagawa University, Kanagawa, Japan
Kazuki Ota and Hideki Katagiri, Department of Industrial Engineering and Management, Faculty of Engineering, Kanagawa University, Kanagawa, Japan
Sazzad Hossain, Arafat Anzir, and Dr. Sheikh Mohammad Shavik, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
ID 139 Effect of Chemical Treatments on Mechanical Properties of Jute
Shimanto Sarker, Dhruba Dhar and Zayed Faysal Revan, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Md. Ershad Khan, Associate Professor, Department of Textile Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Dr. M. Azizur Rahman, Assistant Professor, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Dr. Md. Shahnewaz Bhuiya, Associate Professor, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Luhur Prakoso Prabowo, Teuku Yuri M. Zagloel, Department of Industrial Engineering, Faculty of Engineering, University of Indonesia (UI), Jakarta, Indonesia
ID 141 Computational Analysis of the effect of Mitral Regurgitation on Left Ventricular Mechanics
Subah Mubassira, Ukti Amal and Sheikh Mohammad Shavik, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
Foyez Ahmad, Fardin Mahatab and Sajjad Mahmud, Department of Mechanical and Production Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur, Dhaka, Bangladesh
Md. Zahidul Anam and Md. Tanvir Siraj, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka 1000, Bangladesh
Spandan Basak Payel, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka 1000, Bangladesh
Md. Sadman Sakib, S.M Rumman Ahmed, Ferdous Jahan Simran, MD. Mehrab Hossain,Redwan Abdullah, Shafin Mustafa Chowdhury,Dr. Mohammad Ali, Dr. Mohammad Rafiqur Rashid, Salima Sultana Shimo, Al Muntasir and Saifur Rahman Tushar, Department of Industrial and Production Engineering, Bangladesh University of Textiles (BUTEX), Tejgaon, Dhaka-1205, Bangladesh
ID 147 Development of Low-cost Automated Guided Vehicle (AGV) to Step towards Industry 4.0
Md. Sadman Sakib, Asif Iqbal, Saib Khan Sami, HomayraAnjumi Hoque, Md. Abu Saleh Shafil,Istiak Ahmed, Dr. Mohammad Ali, Dr. Mohammad RafiqurRashid,Salima Sultana Shimo, Al Muntasir and Saifur Rahman Tushar, Department of Industrial and Production Engineering, Bangladesh University of Textiles (BUTEX), Tejgaon, Dhaka, Bangladesh
Md. Ariful Haque, A M Almas Shahriyar Azad, Moumita Ghosh, Zarin Tasnim Oishi and Md. Mohibul Islam, Department of Industrial & Production Engineering, Rajshahi University of Engineering &Technology Rajshahi, Bangladesh
Farhana Afroz, Department of Textile Engineering, BGMEA University of Fashion and Technology (BUFT), Dhaka, Bangladesh, Doctoral candidate, Department of Mechanical and Production Engineering Islamic University of Technology (IUT) Dhaka, Bangladesh (an organ of OIC)
Shamsuddin Ahmed, Department of Mechanical and Production Engineering, Islamic University of Technology (IUT), Dhaka, Bangladesh
ID 150 Development of Low-cost Automated Zero Waste Water System to Step towards Industry 4.0
Md. Sadman Sakib, Nusrat Jahan Brishty, Zaif Parvez, Jannate Nur Ridita Alam Aanchal, Riaz Uddin Raj, Akhzer Safoyat Khan Deehan, Department of Industrial and Production Engineering, Bangladesh University of Textiles (BUTEX), Tejgaon, Dhaka, Bangladesh
Rabaya Nusrath Niva, Faculty of Engineering, Department of Architecture, Premier University, Chittagong, Bangladesh, M. Arch Student, Department of Architecture, Bangladesh University of Engineering and Technology, Dhaka 1000, Bangladesh
Jannatul Ferdous Binti, M. Arch Student, Department of Architecture, Bangladesh University of Engineering and Technology, Dhaka 1000, Bangladesh
Md. Sadman Sakib, Shayan Kumar Roy, Md. Rakibul Hoque, Sutonuka Sarker Priya, Shaila Akter and Babul Chawhan, Department of Industrial and Production Engineering, Bangladesh University of Textiles (BUTEX), Tejgaon, Dhaka-1205
ID 155 Development of IoT Based Low-Cost Smart Inventory Management System
Md. Sadman Sakib, Ahmed Muhiminul Haider, Md. Mehedi Hasan Mojumder, Abid Easanul Alam, Shiful Islam Bappy and Ashiqur Rahman, Department of Industrial and Production Engineering, Bangladesh University of Textiles (BUTEX), Tejgaon, Dhaka, Bangladesh
ID 161 Investigation of Ceramic Component Mechanical Properties Fabricated with Fused Deposition Modeling Process
Rafid Shamsul Karim, Fahim Ahmad, Shaikh Zawad Hasan, Arafath Mohiv, Department of Mechanical and Production Engineering (MPE), Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
ID 162 Literature Review on Ergonomic Handgrip for Public Transportation
Afrida Kabir, Faiyaj Kabir, Saief Newaz Chowdhury, Sharmin Akter Urmee and A R M Harunur Rashid, Department of Mechanical and Production Engineering, Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
ID 174 Geothermal for Sustainable Green Energy in Indonesia
Djoko Nurprawito and Rahmat Nurcahyo, Department of Industrial Engineering, Universitas Indonesia, Depok, Indonesia
ID 175 Development of a Linear Programming Model for the Diet Plan of University Students
H. Sakib, Md. Shahidul Islam, Tushy Tasnim and Abul Mukid Md. Mukaddes, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
ID 178 Effect of Chemical Treatment on Mechanical Properties of Jute Reinforced Composites
Taufiq Ahmed Sady, Md Fahad Hossain and Md Sourav Rahman, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Md. Ershad Khan, Associate Professor, Department of Textile Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Azizur Rahman, Assistant Professor, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Md. Shahnewaz Bhuiyan, Associate Professor, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Tawsif Zaman Arnob, Ekra Binta Noor and Dr. A R M Harunur Rashid, Department of Mechanical and Production Engineering, Islamic University of Technology (IUT), Boardbazar, Gazipur, Dhaka, Bangladesh
ID 181 A Study on Double Wishbone Suspension System
Ashikul Islam Nabil, Md. Sharif Hosen and Md. Rakibuzzaman, Department of Mechanical Engineering, International University of Business Agriculture and Technology (IUBAT), Dhaka, Bangladesh
Ahmet Kolus, Industrial and Systems Engineering, King Fahd University of Petroleum and Minerals, Interdisciplinary Research Center of Smart Mobility and Logistics, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia
Bhetta Age Saputra, Dian Novita Sari and Muthia Khadijah, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia
Eileen Onggaria, Olivia Elisabeth Manurung and Luthfi Azmaiza Hadsyah, Department of Industrial Engineering, Universitas Indonesia, Depok, Indonesia
ID 190 Analysis of Maintenance Management Systems in Steel Manufacturing Industry
Fauzia Ashwin Hadits, Giri Aji Anggoro, Hafizh Rifqi, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia
Chyntia Devi Octaviany, Dendi P Ishak, Department of Industrial Engineering, Univesity of Indonesia, Depok, Indonesia
Zahrina Zihni, Rangga Damar Bagaskara and Yoga Satria, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Depok, 16424, Indonesia
Jihan Aulia, Department of Industrial Engineering, University of Indonesia, Depok, Indonesia
Dr. Dendi P. Ishak, B.Sc., MSIE., Department of Industrial Engineering, University of Indonesia, Depok, Indonesia
ID 194 Customer Churn Analysis Based on User Profile and Activity
Suwandi Dwi S and Zulkarnain, Department of the Industrial Engineering, University of Indonesia, Depok, Indonesia
ID 195 A Survey of Minimarket Maintenance Management System in Jakarta
Marissa Puspita, Panji Pratama Hendra Surya, Tamara Rahma Widowati, Department of Industrial Engineering, Faculty of Engineering, University of Indonesia, Depok, West Java, Indonesia
Suvro Bhowmick, Lecturer, Department of Mechanical Engineering (ME), Military Institute of Science & Technology (MIST), Dhaka, Bangladesh
Mashhud Hasan Al Faruq, Mst. Tasnia Tabassum Kasfia, Samiul Islam Pranto, Student, Department of Mechanical Engineering (ME), Military Institute of Science & Technology (MIST), Dhaka, Bangladesh
ID 197 Analysis of Maintenance Management Implementation in VAC System
Achmad Gunawan Wibisono, Amiral Rasyid, and Rizal Palapa, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, 16424, Indonesia
Yola Lista Valentina, Djoko Sihono Gabriel and Rahmat Nurcahyo, Industrial Engineering Department, Universitas Indonesia, Depok, Indonesia
Aqil Athalla Reksoprodjo, Bonang Ananta, Haikal Rastinggi, Department of Industrial Engineering, University of Indonesia, Salemba, Indonesia
Fajar Marhaendra, Hanif Hamdani and Ilham Nur Pratama, Department of Industrial Engineering Faculty of Engineering Universitas Indonesia Depok, Indonesia
ID 214 Using Discrete Event Simulation to Improve the Patient Flow of A Healthcare System
Imtiajur Rahman, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Bangladesh
ID 215 A systematic review of construction material caused by demolition: A global Perspective.
Hadid Heidari and Soma Gholamveisy, Department of Management and Industrial Engineering, Islamic Azad University- Central Tehran Branch, Tehran, Iran
ID 222 Over Pumping of Groundwater and its Impacts on the Irrigated Environment in Bangladesh
Dr. Md. Nazrul Islam, Associate Editor (Proceedings), Industrial Engineering & Operation
Management Society (IEOM) International, Michigan, USA.
Abdullah Al Rahi, Supply Production Leader, Decathlon, Bangladesh
Qausar Rahman, Data Analyst Quality and Logistics, Carhartt WIP, Bangladesh
Eshayat Hasan Chowdhury, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
ID 229 Design and Manufacture of Prosthetic Bionic hand Controlled via MYO-Sensors
Gopal Mandal and Dr. Sazzad Bin Sharif, Bachelor of Mechanical Engineering (BSME) Program, International University of Business Agriculture and Technology (IUBAT), Bangladesh
ID 231 Consumer Behavior during Festival Seasons with Reference to Electronic Goods in Bangladesh
Shanjoy Chowdhury, Md. Sohanur Rahman, Md. Sona Mia and Md. Mosharraf Hossain, Department of Industrial and Production Engineering, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh
ID 235 Quantification of the Strategic Fit Between Process Choice Criteria and Production Systems
Vishwas Dohale, Research Fellow of Operations and Supply Chain Management, National Institute of Industrial Engineering (NITIE) Mumbai – 400 087, India Business Analyst of Goldratt Consulting India
ID 237 Cost Minimization: A Comparison Study on Various Types of Transportation Methods
Md. Habibur Rahman, Afsana Akter and MD Miskat Hossain Siddique, Department of Mathematics
University of Chittagong, Chittagong, Bangladesh
Md Habibur Rahman, Department of Mathematics, University of Chittagong, Chittagong, Bangladesh
MD Miskat Hossain Siddique, Department of Mathematics, University of Chittagong, Chittagong, Bangladesh
Abir Ahmed, Department of Mathematics, University of Chittagong, Chittagong, Bangladesh
Sheila Mita, Student at Industrial Engineering Universitas Islam Negeri Sultan Syarif Kasim Pekanbaru, Riau, Indonesia
Fitriani Surayya Lubis, Harpito, Vera Devani, Nofirza and Muhammad Rizki, Assistant Professor of Industrial Engineering Universitas Islam Negeri Sultan Syarif Kasim, Pekanbaru, Riau, Indonesia
Lianny Wahyuni, Student at Industrial Engineering, Universitas Islam Negeri Sultan Syarif Kasim, Pekanbaru, Riau, Indonesia
Nurseptiana, Student at Industrial Engineering, Universitas Islam Negeri Sultan Syarif Kasim, Pekanbaru Riau, Indonesia
Melfa Yola, Assistant Professor Industrial Engineering, Universitas Islam Negeri Sultan Syarif Kasim, Pekanbaru Riau, Indonesia
Anwardi, Assistant Professor Industrial Engineering, Universitas Islam Negeri Sultan Syarif Kasim, Pekanbaru Riau, Indonesia
Muhammad Ihsan Hamdy, Assistant Professor Industrial Engineering, Universitas Islam Negeri Sultan Syarif Kasim, Pekanbaru Riau, Indonesia
Fitriani Surayya Lubis, Assistant Professor Industrial Engineering, Universitas Islam Negeri Sultan Syarif Kasim, Pekanbaru Riau, Indonesia
Jannatul Ferdous Mim, Sharna Sarker and Khairun Nahar, Department of Industrial & Production Engineering, Rajshahi University of Engineering and Technology, Rajshahi, Bangladesh
Hanif Rahman Arifin, Muhammad Daffa Farras, Muhammad Fawwaz Robbani, Muhammad Habiburrahman and Nathaniel Dave Anggita Lumban Batu, Department of Industrial Engineering, Universitas Indonesia, Depok, 16424, Indonesia
Armin Ali, Sirajum Munira and Khairun Nahar, Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology (RUET), Rajshahi-6204, Bangladesh
ID 259 Facility Layout Planning Optimization in Local Retail Store Using Systematic Layout Planning
Abigail Naomi Ariela, Fatimah Az-Zahra Qorib, Ruth Vanesa Hutagalung and Wynona Salsabila Hafiz, Undergraduate Student of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia
Arief Nurdini, Doctoral Student of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia
ID 261 Structural Framework of Sustainable Supplier Selection for Raw Materials in a Manufacturing Industry
Md. Ibn Sajid, MD. Sakawat Hossain Sohan, Nusrath Zahan and Md. Ariful Haque, Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology, Rajshahi-6204, Bangladesh
ID 262 Fostering Green Innovation in Organizations: Accompanied Opportunities and Challenges
Ahm Shamsuzzoha, School of Technology and Innovations, Digital Economy Research Platform, University of Vaasa, Vaasa, Finland
Giang Tran, Digital Economy Research Platform, University of Vaasa, Vaasa, Finland
Bojan Jovanovski, Institute of International Management and Entrepreneurship, FH Joanneum, Graz, Austria
Pritam Deb, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka Bangladesh
Anik Barua, Department of Apparel Engineering, Textile Engineering College (CTEC), Project Road, Zorarganj, Chittagong, Bangladesh
Chowdury M Luthfur Rahmam, Syed Misbah Uddin, Mohammed Abdul Karim and Sourav Paul, Department of Industrial and Production Engineering (IPE), Shahjalal University of Science and Technology (SUST), Sylhet, Bangladesh
ID 273 Industrial Engineering Studies: Ergonomics Essences in the Systems Approach
Anastasia Febiyani, Doctoral Program Department of Industrial Engineering, Sebelas Maret University, Industrial Engineering Program, Faculty of Industrial Engineering and Design, Institut Teknologi Telkom Purwokerto, Indonesia
Bambang Suhardi and Pringgo Widyo Laksono, Department of Industrial Engineering, Sebelas Maret University, Surakarta, Indonesia
Heru Prastawa, Department of Industrial Engineering, Universitas Diponegoro, Semarang, Indonesia
Jasmine Pradnya, Mahesti Layla Nursea, Regita Easter Bernanda and Shinta Febriyanti, Department of Industrial Engineering, Universitas Indonesia, Depok, Indonesia
Claresta Yasmine, Gloria Fenny Delavina Simanjuntak, Rizki Estu Rahmaisyraq and Siti Lubna Nazihah, Department of Industrial Engineering, Universitas Indonesia, Depok, 16424, Indonesia
Ardhy Lazuardy, Assistant Professor, Department of Industrial Engineering, Universitas Indonesia, Depok, 16424, Indonesia
Mohsin Uddin, Department of Civil Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
M. Maruf Billah, Department of Civil Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
Ardiansyah Rendi Naufalah, Moh Ridwan Enan Sanusi and Ardhy Lazuardy, Department of Industrial Engineering, University of Indonesia, Depok, Indonesia
Nurhadi Wibowo, National Research and Innovation Agency – Republic of Indonesia (BRIN-RI), KST BJ Habibie – Puspiptek, Serpong, Indonesia
Shantanu Saha, Chittagong University of Engineering & Technology, Bangladesh
Protap Sarker, Md. Atikur Rahman Khan, Md. Eyasin Hossain and Shantanu Saha, Department of Mechanical Engineering, Chittagong University of Engineering & Technology, Chittagong, Bangladesh
ID 281 Technology acceptance model for MSME Human Resource
Emi Suwarni, Department of Management, Universitas Teknokrat Indonesia (UTI), Bandar Lampung, Indonesia
Asmawati, Department of Magister Management, Universitas Abulyatama, Banda Aceh, Indonesia
Imam Ahmad, Department of Information Technology, Universitas Teknokrat Indonesia (UTI), Bandar Lampung, Indonesia
Debby Alita, Department of Information Technology, Universitas Teknokrat Indonesia (UTI), Bandar Lampung, Indonesia
ID 283 Determination of Spare Parts Procurement in Plastic Packaging Manufacturing Company
Lailatul Fadhilla Rahmi, Djoko Sihono Gabriel and Farizal, Industrial Engineering Department, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia
ID 286 5G-based Smart Health Care System Design Using IoT in Bangladesh
Sajjad Ahmed, Md. Arafat Hossain Emu and Quazi Monjur E-Elahi, Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh
Kaitlyn Zhang, Stanford University Online High School, Redwood City, CA, United States
ID 297 The Relationship between Social Intelligence, Age, and Education
Kaitlyn Zhang, Stanford University Online High School, Redwood City, CA, United States
ID 308 Adoption of International Management Standards in Bangladesh: Progress and Prospect
Faria Haque Pushpo and Md. Kutub Uddin, Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh
ID 309 Importance of Sewing line Capacity Study to Improve Productivity in RMG Industry
Md. Masudur Rahman and Md. Mominur Rahman, Department of Textile Engineering, Daffodil International University, Dhaka, Bangladesh
ID 311 Challenges in Engineering Education: A Review
Md. Mostafizur Rahman, Umme Salma Ferdousi, Tamanna Hasan and Tasnuva Sharmin
Department of Textile Engineering, World University of Bangladesh (WUB), Avenue 6 Lake Drive Uttara Sector 17, Dhaka, Bangladesh
ID 313 Dynamics of Norovirus Infection from Contaminated Food Products
Protik Deb, Shantunu Mondal, Sayed Shajalal Uddin and Dr. Md. Haider Ali Biswas, Mathematics Discipline, Science Engineering and Technology School, Khulna University, Bangladesh
Shantunu Mondal, Protik Deb, Rama Rani Paul and Dr. Md. Haider Ali Biswas, Mathematics Discipline, Science Engineering and Technology School, Khulna University, Bangladesh
ID 317 A Mathematical Model for The Speared Of Two Political Parties On The Basis Of Switching
Sayed Shajalal Uddin, Shantunu Mondal, Protik Deb , Rama Rani Paul and Dr. Md. Haider Ali Biswas, Department of Mathematics, Science Engineering and Technology School, Khulna University, Bangladesh
Toukir Ahamed, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
ID 328 Analysis of Challenging Factors of E-commerce Industry in Bangladesh: A Case Study
Shafina Sultana, S. M. Sohaeb Bin Islamandand Md. Mosharraf Hossain, Department of Industrial & Production Engineering, RajshahiUniversity of Engineering& Technology, Rajshahi, Bangladesh
Laras Safitri and Farizal F, Department of Industrial Engineering, University of Indonesia, Depok, Indonesia
ID 330 Application of Value Analysis for Increasing the Value of Industrial Products: A Case Study
Adri Dash, Rifat Hussain Akand Pulok and Md. Mosharraf Hossain, Department of Industrial & Production Engineering (IPE), Rajshahi University of Engineering & Technology (RUET), Rajshahi, Bangladesh
ID 331 Improving the Mental Health Factors of Astronauts via Virtual Reality
Rifah Tasnia, Rakib Hossain, Arpa Afrin, Md. Haider Ali Biswas, Khulna University, Bangladesh
Md. Saiful Islam and Md. Kutub Uddin, Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET), Khulna-9203, Bangladesh
ID 350 The Characteristics of Travelers of Homecoming During the Covid-19 Pandemic in Makassar City
Hasmar Halim, Basyar Bustam, Department of Civil Engineering, Ujung Pandang State of Polytechnic, Makassar, Indonesia
Nur Khaerat Nur, Department of Civil Engineering, Fajar University, Makassar, Indonesia
Muhammad Isradi, Departemen of Civil Engineering, Faculty of Engineering, University Mercu Buana Jakarta, Indonesia
Joewono Prasetijo, Industri Centre of Excellence for Railway (ICoE-REL), Faculty of Engineering and Technology, Univeriti Tun Hussein Onn Malaysia, 84600 Panchor, Johor, Malaysia
ID 351 Comparison of Pavement Performance Models for Urban Road Damage
Muhammad Isradi, 1Doctoral Student Faculty of Engineering Technology, Universiti Tun Hussein Onn Malaysia, 84600 Panchor, Johor, Malaysia
Joewono Prasetijo, 2Faculty of Engineering Technology, Universiti Tun Hussein Onn Malaysia, 84600 Panchor, Johor, Malaysia
Andri Irfan Rifai, Thomas Setiabudi Aden, 3Directorate General of Highway, Ministry of Public Work & Housing, Indonesia
Mawardi Amin, 4Faculty of Engineering, Mercu Buana University Jakarta, Indonesia
Widodo Budi Dermawan, Arief Cahya Purnomo, Muhammad Isradi, Amar Mufhidin, Faculty of Engineering, Mercu Buana University Jakarta, Indonesia
Joewono Prasetijo, Industry Center of Excellence for Railways (IcoE-REL), Universiti Tun Hussein Onn Malaysia, 84600 Panchor, Johor, Malaysia
ID 353 Digital Learning Management as an Option for Future Learning
Moch. Zakki Mubarok, Institut Agama Islam Al Khoziny, Sidoarjo, Indonesia 61252
Niswatin, Institut Agama Islam Al Khoziny, Sidoarjo, Indonesia 61252
Sudirman, Institut Agama Islam Al Khoziny, Sidoarjo, Indonesia 61252
Anny Wahyu Dwi Jayanti, Institut Agama Islam Al Khoziny, Sidoarjo, Indonesia 61252
Muhammad Abdul Ilah, Institut Agama Islam Al Khoziny, Sidoarjo, , Indonesia 61252
ID 354 The Urgency of Higher Education Human Resource Management and Application of Theory Z as a Development Strategy
Muhammad Abdul Ilah and Sa’idur Ridlo, Institut Agama Islam Al Khoziny, Sidoarjo, Indonesia
Wiwin Luqna Hunaida, Universitas Islam Negeri Sunan Ampel Surabaya, Surabaya, Indonesia.
Millatus Shofi and Moch. Zakki Mubarok, Institut Agama Islam Al Khoziny, Sidoarjo, Indonesia
ID 355 Effect of Reflexology on Blood Pressure Among Patients with Hypertension in The Work Area of Kertajati Community Health Center, Majalengka District In 2021
Heni, Idris Handriana and Lina Siti Nuryawati, STIKes YPIB Majalengka
ID356 Employee Performance Assessment Using Simple Additive Weighting (Saw) Method
Hery Mustofa and Syaiful Bakhri, Universitas Islam Negeri Walisongo Semarang,
Jl. Walisongo No.3-5, Tambakaji, Kec. Ngaliyan, Kota Semarang, Jawa Tengah, Indonesia
ID 357 Internalization of Local Wisdom of Huma Betang’s Philosophy in Realizing Pancasila Student Profiles
Liberti Natalia Hiaa, Eliana Sarib, Rugaiyah, Doctor of Education Management Program Students, State University of Jakarta, Indonesia
ID 358 The Impact of Implementing Emergency Curriculum on Students’ Creativity during Covid-19 Pandemic Learning
Mulyo Kurniati, Sarwiji Suwandi and Budhi Setyawan, Postgraduate Program, Sebelas Maret University Surakarta, Jln. Ir. Sutami, 36 A Kentingan, Surakarta, Indonesia
ID 359 Entrepreneurship Education Synergy in The Framework of Vocational Education Development by Kadin Kalteng
Rahmad Hamka, Liberty Natalia Hia, PGRI Palangkaraya University
ID 360 The Validity of Problem-Based Collaborative Learning Model Books to Improve Students’ Creative Thinking and Metacognitive Ability
Rusly Hidayah, Universitas Negeri Surabaya Indonesia, Universitas Negeri Malang Indonesia
Fauziatul Fajaroh, Parlan and I Wayan Dasna, Universitas Negeri Malang Indonesia
ID 361 Community Economic Empowerment Management through Micro WAQF Bank
Sabolah, Doctoral Program Student of Education Management Study Program University of Jakarta
ID 362 Village Head Transformational Leadership in Facing the COVID-19 Pandemic
Widharto, Hamidah, Budi Santoso, and Rachma Fitriati, , Faculty of Economics, Jakarta State University, Jl. Rawamangun Muka Raya, Kota Jakarta Timur, 13220, ndonesia
ID 363 The Effect of Work Discipline and Motivation on Employee Performance
Yhonanda Harsono, Munarsih, and Ridhwan Noor Alam
Management Departement, Universitas Pamulang, Tangerang Selatan, Indonesia
Ria Estiana and Nurul Giswi Karomah
Business Administration Departement , Polytechnic LP3I Jakarta, Jakarta, Indonesia
ID 364 Competitive Advantage as a Mediating Product Innovation and Social Media for The Marketing Performance of Micro Small Medium Economics (MSMES) In Surabaya
Wiwik Handayani, Faculty of Economics and Business Universitas Pembangunan Nasional Veteran Jawa Timur, Surabaya Indonesia
Andreas Nugroho Sihananto, Faculty of Computer Science Universitas, Pembangunan Nasional Veteran Jawa Timur, Surabaya, Indonesia
Rusman Yulianto, Ari Setya Budi and Muhammad Khalif, Students, Faculty of Economics and Business, Universitas Pembangunan Nasional Veteran, JawaTimur,Surabaya, ,Indonesia
ID 365 E’Teacher Digitizing Competencies of High School and Vocational Teachers during the Covid-19 Pandemic
Lusy Tunik Muharlisiani, Pratiwi Dwi Karjati, Suharnanik, Noviana Desiningrum, Leni Yuliana, Amiruddin Hadi Wibowo, Nugrahini Susantinah Wisnujati and Raden Ajeng Maria Octavia Christyningrum, Universitas Wijaya Kusuma Surabaya, Indonesia
Satria Abadi, STMIK Pringsewu Lampung, Indonesia
ID 366 Supply Chain Resilience Framework for Covid-19 Pandemic Era
Dwi Agustina Kurniawatia, Amalia Azka Rahmayanib*, Yandra Rahadian Perdanaa, Herninanjati Paramawardhania, and Titi Saria
aIndustrial Engineering Department, Faculty of Science and Engineering
bLibrary and Information Science, Faculty of Adab and Cultural Science
a,b Universitas Islam Negeri Sunan Kalijaga, Yogyakarta, Indonesia