|
Author Index |
|
Abbas, Mustafa Growth of Food Tech: A Comparative Study of Aggregator Food Delivery Services in India |
|
Abdul Halim, Nur Fadhlina Comparison Between the Models of GARCH and EGARCH in Predicting the Change of Composite Stock Price Index |
|
Abolhassani, Amir Strategies and Techniques to Enhance Productivity in North American Automotive Industry |
|
Acuña, Eliana Optimization in the management of time in the emergency service for patients triage 2. |
|
Aghighi, Azam Designing distribution networks of perishable products under stochastic demands and routs |
|
Agyekum-Mensah, George Development of a procurement decision support system to enhance construction project delivery – From claims management perspective. |
|
Ahmad, S.M. Tofayel Defining authentication method of financial software applications by analysing user activities history |
|
Ahmad, Wasim AgiFlex System: An Approach towards Unification of Agility and Flexibility Dimensions from Manufacturing Perspective |
|
Ahmadi, Majid Standard Transformation Formulation Framework for Robust Optimization Technique with Application on Healthcare Delivery Systems |
|
Akram, Roshanak Effects of Human Stress on Reliability of Lean Systems – a Markovian Approach |
|
Al ithawi, Khaleel Modeling and Optimization in a new Machining Production Line by using Manufacturing System Simulation |
|
Al Kindi, Mahmoud Open Innovation through Virtual Business Network: Perspective from Small and Medium Enterprises |
|
Al-Ali, Mohamed Study and Analysis of Hazardous Conditions and Near Misses by Fault Trees |
|
Al-Muflih , Ali Healthcare Delivery Framework for Urgent Care at Home |
|
AL-SHEBEEB, OMAR Computer Aided Process Planning Approach for Cost Reduction and Increase in Throughput |
|
Alam, Jahangir Save water; save our next generation. |
|
Alavi, Omid Effect of reducing the accuracy of wind speeds on distribution functions: A case study |
|
Evaluation of hydrogen production from wind turbines: A case study |
|
Using wind turbines for hydrogen production: A case study |
|
Albers, Albert Development of construction catalog for appropriate design of fiber reinforced Polymers |
|
Alghassab, Mohammed Controlling Ground Vehicle Nonlinear Dynamics By The Use of Automobile Traction Models |
|
Controlling Ground Vehicle Nonlinear Dynamics By The Use of Automobile Traction Models |
|
Alhumade, Hesham Design and Optimization of a CO2 Pipeline Network for the Province of Alberta |
|
Neural Network Viscosity Models for Multi-Component Liquid Mixtures |
|
Optimizing Corrosion Protection of Stainless Steel 304 by Epoxy-Graphene Composite using Factorial Experimental Design |
|
Ali, Abid AgiFlex System: An Approach towards Unification of Agility and Flexibility Dimensions from Manufacturing Perspective |
|
Ali, Ahad Using Simulation Modeling To Increase Plant Throughput |
|
Aljabr, Ahmed Analysis of Operational Efficiency Methods at Saudi Aramco: Applying Continuous Improvement Best Practices |
|
Effective Utilization of Implementing TPM in Saudi Arabian Companies |
|
Almaktoom, Abdulaziz T. Reliability Evaluation and Design Optimization of Inventory Management System |
|
Alqaazaz, Ali State of the Art of Semantic Web |
|
Alrabghi, Abdullah Maintenance modelling: revisiting common assumptions |
|
Alsaadi, Ahmed Reliability Evaluation and Design Optimization of Inventory Management System |
|
alshammari, muteb Application of Quality Management Systems (QMS) in Construction Industry |
|
Alsyouf, Imad Application of statistical process control chart for monitoring electric power losses through transmission and distribution system: a case study |
|
Altherwi, Abdulhadi Implementation of a Statistical Process Control System for a Selected Industrial Plant |
|
Alwerfalli, Daw Analysis of Operational Efficiency Methods at Saudi Aramco: Applying Continuous Improvement Best Practices |
|
Application of Quality Management Systems (QMS) in Construction Industry |
|
Impact of Design Simplification Analysis (DSA) on Automotive Product Development |
|
Alzameli, Kamal Aldeen OPTIMIZATION OF THERMAL PROFILE PROCESS IN ASSEMBLY LINE OF PRINTED CIRCUIT BOARDS (PCB) USING DESIGN OF EXPERIMENTS |
|
Anderson, William Techno-economic analysis of a peatland gasification process for methanol synthesis and power production |
|
Ansah, Richard Hannis Advancing Towards Delay-Free Construction Project: A Review |
|
An Environmental Impact Framework for Evaluating Construction Projects Delays |
|
Assessment of Environmental Risks in Construction Projects: A Case of Malaysia |
|
Lean Construction Tools |
|
Aqlan, Faisal Design and Implementation of a Database for Safety and Ergonomics in Engineering Research Labs |
|
Lean Process Improvement of First Case Scheduling in Operating Rooms |
|
Process Improvement Approach to Investigate Low Block Utilization of Operating Rooms: A Case Study |
|
Arewa, Andrew Development of a procurement decision support system to enhance construction project delivery – From claims management perspective. |
|
Asadi, Ali Wastewater effluents & Optimizing Aeration Process |
|
Asaibi , Hasan Challenges of Future Aircraft Propulsion Aircraft Electric Green Taxiing Intelligent System Rear View Camera, alarms and sensor |
|
Ashour, Omar Lean Process Improvement of First Case Scheduling in Operating Rooms |
|
Process Improvement Approach to Investigate Low Block Utilization of Operating Rooms: A Case Study |
|
Asif, Muhammed A Tale of Two Systems - Winning the Battle Againt Hidden Factories |
|
Azab, Ahmed A Binary Integer Programming Model for The Job Shop Scheduling Problem |
|
Multi-level Capacitated lot-sizing with Backlogging and Environmental Considerations |
|
Stochastic Hierarchical Approach for Master Surgical Scheduling |
|
Aziz, Asnaf Thermal Stress Analysis of Cyclic Braking In a Disc Brake |
|
BABATUNDE JOEL, TODOWEDE APPLYING TECHNOLOGY TO EDUCATIONAL DELIVERY AND ITS MANAGEMENT: LESSON FROM NIGERIA |
Top |
Bajwa, Muhammad DESIGNING AN EFFICIENT MEDICAL LOGISTIC SYSTEM USING KANBAN IN LARGE HOSPITAL SYSTEMS |
|
Baki, Mohammed A Binary Integer Programming Model for The Job Shop Scheduling Problem |
|
Composite Index Creation Using AHP: Efficiency Optimization for the Health Care Industry |
|
Min-Max Appointment Scheduling Problem |
|
Multi-level Capacitated lot-sizing with Backlogging and Environmental Considerations |
|
Standard Transformation Formulation Framework for Robust Optimization Technique with Application on Healthcare Delivery Systems |
|
Stochastic Hierarchical Approach for Master Surgical Scheduling |
|
Balihallimath, Harsh Growth of Food Tech: A Comparative Study of Aggregator Food Delivery Services in India |
|
Banwo, Olatunde Development of a procurement decision support system to enhance construction project delivery – From claims management perspective. |
|
Barbole, kanhayyalal Environmental Pollution Reduction in Cement Industry for Co2 combustion of Waste Tyre and Coal as a Fuel |
|
Barkin, Abdullah Emir Nonlinear Mathematical Solution For Quadratic Assignment Problem: Real-World Application of Turkish Airforce Academy’s Master Plan |
|
Baseer, Majid Bio-diesel as an Alternative Fuel (Description, Benefits and Production Process) |
|
Collaborative Project Management and Governance with a Focus on Inter-Firm system Integration within the High Tech Industry. |
|
Effects of Temperature and Droplet Size on the Ignition Delay of Diesel and Bio-Diesel Blends |
|
Thermal Stress Analysis of Cyclic Braking In a Disc Brake |
|
Bechard, Vincent Simulation-Aided Production and Operations for Food and Beverage Plants |
|
Behroozi, Mehdi Robust Solutions for Geographic Resource Allocation Problems |
|
Wasserstein distance and the distributionally robust TSP |
|
Worst-case demand distributions in vehicle routing |
|
Belui Essimengane, Jean Prosper Improving the Management of Operations at the “Office des Ports et RAdes du Gabon” (OPRAG). The road to achieve and sustain Quality Service delivery. Paper presented at the Industrial Engineering and Operations Management Conference (IEOM Detroit): Achie |
|
Knowledge Retention and Stabilisation within OPRAG: A Management must for the Excellence achievement. |
|
Quality Delivery Service as a Strategy: Profile and Perspectives for Excellence achievement within OPRAG |
|
Benignos, Mary Grace System Architecture Design and Implementation of Trading Technology in one of the brokerage company in the Philippines |
|
BENMOUNAH, Amar Technical and économic impacts on different methods of improving the performance of a gas pipeline. |
|
Bhardwaj, Arvind An investigation into the dynamics of supply chain practices in Dairy industry: A Pilot Study |
|
Bhatt, Vatsal Best Material for Commercial packaging of Food products and Incorporating Track and Trace systems |
|
Bhattu, Aarti Improving Quality of Technical Education by Quality Function Deployment (QFD) |
|
Bhortake, Rupesh Experimental Analysis of Power Consumption in Ceiling Fan |
|
BHORTAKE, VAISHALI Experimental Analysis of Power Consumption in Ceiling Fan |
|
Bidichandani, Nishant Growth of Food Tech: A Comparative Study of Aggregator Food Delivery Services in India |
|
Biranvand, Meysam Performance Evaluation using Balanced Scorecard (BSC) and Fuzzy TOPSIS technique Case Study : National Iranian Gas Company |
|
Bodaghi, Behrooz An optimization model for scheduling emergency operations with multiple teams |
|
An optimization model for scheduling emergency operations with multiple teams |
|
Bon, Abdul Talib An Efficient Approach for Traveling Salesman Problem Solution with Branch-and-Bound |
|
Analysis of Accuracy Multivariate Control Chart T2Hotelling Free Distribution with Outlier Removal |
|
Comparison Between the Models of GARCH and EGARCH in Predicting the Change of Composite Stock Price Index |
|
Demand Forecasting for Strategic Resource Planning |
|
Modeling Analytical Hierarchy Process and Fuzzy Inference System Tsukamoto for Crude Palm Oil Production Planning |
|
The APT with Lagged, Value-at-Risk and Asset Allocations by Using Econometric Approach |
|
Bottani, Eleonora Supply Chain Resilience Assessment: A Grey Systems Theory Approach |
|
Boudhar, Mourad Scheduling on Two Uniform Machines with Unit Processing Times and Conflict Graph |
|
Britt, Justin Stochastic Hierarchical Approach for Master Surgical Scheduling |
|
Butenko, Viktoriia Development of construction catalog for appropriate design of fiber reinforced Polymers |
|
Carlsson, John Wasserstein distance and the distributionally robust TSP |
Top |
Worst-case demand distributions in vehicle routing |
|
Carrier, John A Tale of Two Systems - Winning the Battle Againt Hidden Factories |
|
Chan, CHEE-MING Engineering Postgraduate Students’ Perspective on Their Preparedness for the Job Market:Employability Attributes |
|
Chandra, Jinkala Best Material for Commercial packaging of Food products and Incorporating Track and Trace systems |
|
Chaudhary, Ashish Kumar Productivity Mapping for a Reverse Logistics Warehouse with n series and m Parallel Processes |
|
Cheema, Javed DESIGNING AN EFFICIENT MEDICAL LOGISTIC SYSTEM USING KANBAN IN LARGE HOSPITAL SYSTEMS |
|
Chengpeng, Fan The Dynamic Research on High-speed Railway Seat Inventory Control |
|
Chihak, Tony How the Industrial Engineer can Bend the Healthcare Cost Curve |
|
CHINGONO, TATENDA TALENT Social impact of sustainable bio-gas production by the city of Johannesburg |
|
Study on regulations, policies and permits for implementation of bioenergy systems |
|
Technologies for Humanitarian logistics in Southern Africa |
|
chowdhury, nusrat Multi-level Capacitated lot-sizing with Backlogging and Environmental Considerations |
|
Cruz-Salgado, Javier SLACK VARIABLE APPROACH FOR MIXTURE EXPERIMENT |
|
Cuellar Cahves, Martha M Econometric models for decision making in IT services |
|
Cuellar Cahves, Martha M Review on the research culture and management taking into account values of respect and cooperation. |
|
dalal, shailee Study and Optimization of inventory of an Automobile showroom |
Top |
Daneshfar , Zahra Evaluating the Customer Retention and Satisfaction and the Reasons of Losing Customers in the Auto Insurance |
|
Investigating the Effectiveness of SMS Marketing in Increasing the Sale of Insurance in the Bank Branches (A Case Study) |
|
de Castro Fettermann, Diego Relationship between lean manufacturing implementation and leadership styles |
|
De La Luz, César The Value of Stakeholder Analysis in the Processes of a Textile Company |
|
Dehghani, Mohammad Developing a new Iterative Optimization-based Simulation (IOS) model with Predictable and Unpredictable Trigger Events in Simulated Time |
|
Deif, Ahmed Lean Gamification between Industry and University |
|
Dev, Manish An investigation into the dynamics of supply chain practices in Dairy industry: A Pilot Study |
|
Dhanvijay, M Importance of having a systematic approach for providing proactive communication about project key indicators & health during customer acquisition and product delivery life cycle. |
|
Dolsen, Mark Mizen Boushi in Mass Production: a framework for maintaining reliability in a dynamic environment |
|
Doulat, Mehran Sustained Quality Award Status in Developing Country: A study on the Dubai Quality Award Recipients |
|
Downey, Liang Enabling The Future of Energy & Environment |
|
Ebeid, Akram The Applicability of Lean Maintenance in The Container Handling Industry |
Top |
Edwards, William The Move It Forward Theory (MIFT) offers a better method to manage major machine failure in a serial flow line. |
|
Ekambaram, Palaneeswaran An optimization model for scheduling emergency operations with multiple teams |
|
An optimization model for scheduling emergency operations with multiple teams |
|
Eleftheriadis, Ragnhild A guideline of quality steps towards Zero Defect Manufacturing (ZDM) in Industry |
|
ElKamel, Ali Integration of Renewable Energy into Oil & Gas Industries: Solar-aided Hydrogen Production |
|
Design optimization of a microreactor for the production of biodiesel |
|
Design optimization of an electrolytic hydrogen for the Sarnia-Lambton upgrader |
|
Multi Objective Optimization of Distributed Energy Systems Considering Renewable and Fossil Fuel Resources |
|
Optimizing Cleaning Schedules of Heat Exchanger Networks |
|
Techno-economic analysis of a peatland gasification process for methanol synthesis and power production |
|
Elmabrouk, Saber Drilling Rig Selection and Cost Analysis: a Comparison of Top Drive and Rotary Table Drilling Systems |
|
Elmabrouk, Saber Reservoir Management Strategies for Development of Water Injection Planning Project |
|
Elsholkami, Mohamed Design optimization of a microreactor for the production of biodiesel |
|
Design optimization of an electrolytic hydrogen for the Sarnia-Lambton upgrader |
|
Optimizing Cleaning Schedules of Heat Exchanger Networks |
|
Techno-economic analysis of a peatland gasification process for methanol synthesis and power production |
|
Enzi, Abass Calculate Layer Depth of Selective Laser Sintering Depending On Processing Time |
|
Design of a Prototype Selective Laser Sintering System for Process Parameter Optimization |
|
Using Simulation Modeling To Increase Plant Throughput |
|
Faiz, Tasnim Ibn An ILP Model for Healthcare Facility Location Problem with Long Term Demand |
Top |
Healthcare Delivery Framework for Urgent Care at Home |
|
Fries, Carlos Ernani Lean manufacturing and socio-technical and ergonomics practices implementation |
|
Relationship between lean manufacturing implementation and leadership styles |
|
Gammon, Mark Modifying a Multi-Objective Genetic Algorithm Method for Active Sonar Clutter Reduction using Real-World Data |
Top |
Ganji, Vahid Effects of Human Stress on Reliability of Lean Systems – a Markovian Approach |
|
GARCIA, VICTOR Increased efficiency of the dispensing of the surgery room pharmacy |
|
Optimization in the management of time in the emergency service for patients triage 2. |
|
Ghasemi, Elaheh An integrated MOEA and MCDM for multi-objective optimization (Case study: control chart design) |
|
Gherbal, Nawal APPLICATION OF BALANCED SCORECARD IN THE LIBYAN CONSRUCTION INDUSTRY |
|
Gomez, Maria de los Angeles The Value of Stakeholder Analysis in the Processes of a Textile Company |
|
GOMEZ MONTOYA, DIEGO JOSE FACTORS THAT EXPLAIN THE PROPENSITY OF A CUSTOMER TO BE PROMOTER OF A BRAND OF TELECOMMUNICATIONS SERVICES |
|
Gopalakrishnan, Bhaskaran Computer Aided Process Planning Approach for Cost Reduction and Increase in Throughput |
|
Strategies and Techniques to Enhance Productivity in North American Automotive Industry |
|
Gore, Dhiraj Analytical and experimental analysis for comparison of performance characteristics of catalytic converters including simulation |
|
Goudarzi, Hossein Economical evaluation of passive systems for residential buildings in Kerman, Iran |
|
Economical evaluation of passive systems for residential buildings in Kerman, Iran |
|
Habeeb, Shaik Best Material for Commercial packaging of Food products and Incorporating Track and Trace systems |
Top |
Han, Jihee Path planning for a mobile robot using ant colony optimization and the influence of critical obstacle |
|
Haridy, Salah Effective Attribute Charts for Monitoring Manufacturing and Service Industries |
|
Harner, E. James Strategies and Techniques to Enhance Productivity in North American Automotive Industry |
|
Hasanzadeh, Hamid Multi-objective economic-statistical design of a new t-Chart based on the process capability index |
|
Hasbullah, Endang Soeryana Comparison Between the Models of GARCH and EGARCH in Predicting the Change of Composite Stock Price Index |
|
Helo, Petri Cloud-based Virtual Supply Chain |
|
Open Innovation through Virtual Business Network: Perspective from Small and Medium Enterprises |
|
Hewitt, Jan The Role of Technology in Outsourcing Practices in Nigerian Oil and Gas Industry |
|
Hidayat, Yuyun Analysis of Accuracy Multivariate Control Chart T2Hotelling Free Distribution with Outlier Removal |
|
Hijry, Hassan Implementation of a Statistical Process Control System for a Selected Industrial Plant |
|
Honarkar, Zahra Predictive Control Design of Gas Turbine Using Multi-Objective Optimization Approach |
|
Hong, Jon-Chao A meta-analysis of electronic sensors applying in inventions of young students |
|
Hussain, Hadia An Investigation of Lean Manufacturing Implementation in Textile Industries of Pakistan |
|
ikome, john Advance Method of Re-scheduling after a Machine Breakdown. Case Study Ceramic Manufacturing Plant South Africa. |
Top |
The Value of Intellectual Property and Challenges faced in the Implementation. Case Study SA |
|
Jafarian, Kamal Predictive Control Design of Gas Turbine Using Multi-Objective Optimization Approach |
Top |
Jafarian-Namin, Samrad An integrated MOEA and MCDM for multi-objective optimization (Case study: control chart design) |
|
Multi-objective economic-statistical design of a new t-Chart based on the process capability index |
|
JAFERI, FATEMEH A study on how to improve PMBOK guidelines performance by simulation Case Study: National Gas Company of Lorestan province |
|
Performance Evaluation using Balanced Scorecard (BSC) and Fuzzy TOPSIS technique Case Study : National Iranian Gas Company |
|
Jaggi, Chandra K. Optimal Ordering Policy for non-instantaneous deteriorating items with partially backlogged and stock dependent demand under two-warehouse storage facility |
|
Jalali, Seyed Mohammad Jafar Social Media Marketing: A Scientific Framework |
|
Jasim, Eman Application of statistical process control chart for monitoring electric power losses through transmission and distribution system: a case study |
|
Jhonny, Rodríguez Supply System Design of a Lubricant Distributor Company in Colombia |
|
Kabadayi, Nihan Service Quality Analysis with Using a Fuzzy AHP Methodology: A case study in Veterinary Hospital in Turkey |
Top |
Kader, Golam Computational Stress Analysis of an Automotive Vehicle Tire for Road-Contact Surface |
|
Karakaya, Kerem Nonlinear Mathematical Solution For Quadratic Assignment Problem: Real-World Application of Turkish Airforce Academy’s Master Plan |
|
Karatas, Aslihan Application of Quality Management Systems (QMS) in Construction Industry |
|
Kaviani, Mohamad Amin An integrated MOEA and MCDM for multi-objective optimization (Case study: control chart design) |
|
Supply Chain Resilience Assessment: A Grey Systems Theory Approach |
|
Keerthsinghe, Chami A Decision Support Model to Select Suppliers In Apparel industry |
|
Keskinturk, Timur Nonlinear Mathematical Solution For Quadratic Assignment Problem: Real-World Application of Turkish Airforce Academy’s Master Plan |
|
Khadem, MMR Khan Open Innovation through Virtual Business Network: Perspective from Small and Medium Enterprises |
|
khan, Alam zaib Effects of Temperature and Droplet Size on the Ignition Delay of Diesel and Bio-Diesel Blends |
|
khan, muhammad arsalan Bio-diesel as an Alternative Fuel (Description, Benefits and Production Process) |
|
Effects of Temperature and Droplet Size on the Ignition Delay of Diesel and Bio-Diesel Blends |
|
Thermal Stress Analysis of Cyclic Braking In a Disc Brake |
|
Khan, Rafiullah A Way Forward to Attain Lean Manufacturing Status through Transformational Leadership |
|
Khatami Firouzabadi , Seyyed Mohammad Ali An Intuitionistic Fuzzy-Based DEMATEL to Rank Risks of Construction Projects |
|
Khojasteh, Yacob A Study on Japanese Automotive Firms and Managing Supply Chain Vulnerability |
|
Khond, Mohan Analytical and experimental analysis for comparison of performance characteristics of catalytic converters including simulation |
|
Growth of Food Tech: A Comparative Study of Aggregator Food Delivery Services in India |
|
Improving Quality of Technical Education by Quality Function Deployment (QFD) |
|
Komaki, Ghorbanmohammad Scheduling multi-objective unrelated parallel machines using hybrid reference-point based NSGA-II algorithm |
|
Komaki, Mohammad Composite Desirability Function (CDF) Approach for Evolutionary Algorithm Parameter Tuning |
|
Krishnan, Krishna Reliability Evaluation and Design Optimization of Inventory Management System |
|
Ku, Hong-ming Integration of Renewable Energy into Oil & Gas Industries: Solar-aided Hydrogen Production |
|
Kucuk Cirpin, Birgul Service Quality Analysis with Using a Fuzzy AHP Methodology: A case study in Veterinary Hospital in Turkey |
|
Kunal, Rohit Productivity Mapping for a Reverse Logistics Warehouse with n series and m Parallel Processes |
|
Lakrash, Salem Empirical Correlation of Consistency and Time of Trajectory for Industrial Robots |
Top |
Lalmazloumian, Morteza Standard Transformation Formulation Framework for Robust Optimization Technique with Application on Healthcare Delivery Systems |
|
Latorre, Jonathan FMI based Co-Simulation Framework to enable timing verification in Cyber-Physical Systems |
|
Legary, Eric Mizen Boushi in Mass Production: a framework for maintaining reliability in a dynamic environment |
|
Likkasit, Chonnawee Integration of Renewable Energy into Oil & Gas Industries: Solar-aided Hydrogen Production |
|
Liu, Yuxi Warranty Analysis of Remanufactured Electrical Products |
|
Lupi Vergara, Lizandra Lean manufacturing and socio-technical and ergonomics practices implementation |
|
Madanhire, Ignatio Development of a dust minimization system for the coal wagon tippler section for a coal power plant |
Top |
Eco –industrial park framework development to enhance waste management: Case study |
|
Use of Quality Assurance in Manufacturing Mine Roof Bolts for a Platinum Mine: Case study |
|
Madhuranthakam, Chandra Mouli Design optimization of a microreactor for the production of biodiesel |
|
Optimizing Cleaning Schedules of Heat Exchanger Networks |
|
Magana, Ana Continuous Improvement using Time Study and Lean Manufacturing - A Case Study |
|
Mahdavi, Iraj A new cell formation with part family clustering in cellular manufacturing system |
|
Mahmoudabadi, Abbas Considering the time value of money for modeling the risk assessment of cost and time components in construction projects |
|
Investigating the relationship between team-working and production agility in manufacturing organizations |
|
Mahmud, Walid Drilling Rig Selection and Cost Analysis: a Comparison of Top Drive and Rotary Table Drilling Systems |
|
Reservoir Management Strategies for Development of Water Injection Planning Project |
|
Malmir, Behnam Designing distribution networks of perishable products under stochastic demands and routs |
|
Maqsood, Sahar What is Instagram? A social Media Or A News Media |
|
Maroufmashat, Azadeh Integration of Renewable Energy into Oil & Gas Industries: Solar-aided Hydrogen Production |
|
Multi Objective Optimization of Distributed Energy Systems Considering Renewable and Fossil Fuel Resources |
|
Technical and Economic Feasibility Study of Methanol Production from Flaring Gas in Iran |
|
MASOOD, SYED ATHAR A Way Forward to Attain Lean Manufacturing Status through Transformational Leadership |
|
Mathiasen, John Bang Concurrent engineering: the drawbacks of applying a one-size-fits-all approach |
|
Mathiasen, Rasmus Munksgaard Concurrent engineering: the drawbacks of applying a one-size-fits-all approach |
|
Mbohwa, Charles A framework for sharing knowledge within SMMEs: A South African Study |
|
Barriers of sharing tacit knowledge: A case of Gauteng agricultural SMMEs, South Africa |
|
Causes of poor quality on SMEEs: A Case of Gauteng SMEs, South Africa |
|
Development of a dust minimization system for the coal wagon tippler section for a coal power plant |
|
Eco –industrial park framework development to enhance waste management: Case study |
|
Improving the Management of Operations at the “Office des Ports et RAdes du Gabon” (OPRAG). The road to achieve and sustain Quality Service delivery. Paper presented at the Industrial Engineering and Operations Management Conference (IEOM Detroit): Achie |
|
New Perspectives in Valued Service Excellence in Manufacturing Industry |
|
Return Patterns and Restructuring of Distressed Manufacturing Firms: Smart Innovation Approach |
|
Social impact of sustainable bio-gas production by the city of Johannesburg |
|
Study on regulations, policies and permits for implementation of bioenergy systems |
|
Technologies for Humanitarian logistics in Southern Africa |
|
Use of Quality Assurance in Manufacturing Mine Roof Bolts for a Platinum Mine: Case study |
|
Mendoza Cortes, Valeria Increased efficiency of the dispensing of the surgery room pharmacy |
|
Optimization in the management of time in the emergency service for patients triage 2. |
|
Mobin, Mohammadsadegh An Intuitionistic Fuzzy-Based DEMATEL to Rank Risks of Construction Projects |
|
Multi-objective economic-statistical design of a new t-Chart based on the process capability index |
|
Predictive Control Design of Gas Turbine Using Multi-Objective Optimization Approach |
|
Reliability Modeling and Optimization of New product Development Process |
|
Mohamed, Shafiullah Hussain Valiallah Reliability Modeling for Rotor Systems with Imbalance Based on Vibration Analysis |
|
Mohammad, Musli EMPIRICAL RESEARCH METHODOLOGY ON OPERATION DIAGNOSIS TO IDENTIFY OPERATION IMPROVEMENT OPPORTUNITIES |
|
mohammed, Abbas Decision making with the analytical hierarchy process (AHP) for materials and design selection in the POPE lawn mower manufacturing for minimizing environmental impacts |
|
Mohd Soom, Mohd Amin IMPROVING SEMICONDUCTOR BACK-END FINAL TEST THROUGHPUT VIA RFID-BASED LOT CONTROL SYSTEM |
|
Mohd Yusuff, Rosnah IMPROVING SEMICONDUCTOR BACK-END FINAL TEST THROUGHPUT VIA RFID-BASED LOT CONTROL SYSTEM |
|
Mondal, Prakash Chandra Defining authentication method of financial software applications by analysing user activities history |
|
Mor, Rahul S An investigation into the dynamics of supply chain practices in Dairy industry: A Pilot Study |
|
Moros, Santiago Optimization in the management of time in the emergency service for patients triage 2. |
|
Mostafaeipour, Ali Economical evaluation of passive systems for residential buildings in Kerman, Iran |
|
Economical evaluation of passive systems for residential buildings in Kerman, Iran |
|
Effect of reducing the accuracy of wind speeds on distribution functions: A case study |
|
Evaluation of hydrogen production from wind turbines: A case study |
|
Investigation of using Solar Energy: A Case Study |
|
Using wind turbines for hydrogen production: A case study |
|
motebele, makhala mpho New Perspectives in Valued Service Excellence in Manufacturing Industry |
|
Return Patterns and Restructuring of Distressed Manufacturing Firms: Smart Innovation Approach |
|
The Use of Knowledge Management as A Sustainable Competitive Advantage in African Manufacturing Settings: An Architectural and Economic Analysis for 21st century |
|
Mousazade, Roghaye Considering the time value of money for modeling the risk assessment of cost and time components in construction projects |
|
Muhammad Din, Asfa Critical Success Factors for Successful Implementation of Six Sigma in Pakistani Industries |
|
Mushiri, Tawanda Design of a bench saw cutting machine for wood with automatic braking system |
|
Design of a mechanical cleaning device P.I.G (pipeline intervention gadget) connecting two transfer lines in Zimbabwe |
|
Design of a paper slitting and rewinding machine for a developing country, Zimbabwe |
|
Design of an automatic tyre pressure inflation system for small vehicles |
|
Mushiri, Tawanda Improving the Management of Operations at the “Office des Ports et RAdes du Gabon” (OPRAG). The road to achieve and sustain Quality Service delivery. Paper presented at the Industrial Engineering and Operations Management Conference (IEOM Detroit): Achie |
|
Mustafa, Ibrahim Implementation of Problem-Based Learning (PBL) in Chemical Thermodynamics Course at the Yanbu Industrial College, Saudi Arabia |
|
Mustafa, Shariman Advancing Towards Delay-Free Construction Project: A Review |
|
An Environmental Impact Framework for Evaluating Construction Projects Delays |
|
Assessment of Environmental Risks in Construction Projects: A Case of Malaysia |
|
Lean Construction Tools |
|
Mutingi, Michael A Service Quality Assessment of Internet Banking of Commercial Banks in Namibia in the Absence of Face to Face Encounter |
|
An Assessment of Service Quality Delivery in Selected Local Authorities in Namibia |
|
Myklebust, Odd A guideline of quality steps towards Zero Defect Manufacturing (ZDM) in Industry |
|
Mynderse, James Calculate Layer Depth of Selective Laser Sintering Depending On Processing Time |
|
Design of a Prototype Selective Laser Sintering System for Process Parameter Optimization |
|
Using Simulation Modeling To Increase Plant Throughput |
|
Nader, Donya Investigating the relationship between team-working and production agility in manufacturing organizations |
Top |
Naikan, V N A Reliability Modeling for Rotor Systems with Imbalance Based on Vibration Analysis |
|
Nasseri, Hadi A survey on fuzzy mathematical programming models based on a new approach to fuzzy ordering |
|
Navarro, Bryan Engineering Trade-Off Strategies Design Evaluation for Fabrication Company in the Philippines |
|
System Architecture Design and Implementation of Trading Technology in one of the brokerage company in the Philippines |
|
Navarro, Maricar Engineering Trade-Off Strategies Design Evaluation for Fabrication Company in the Philippines |
|
System Architecture Design and Implementation of Trading Technology in one of the brokerage company in the Philippines |
|
Nazarkar, Nikhil Importance of having a systematic approach for providing proactive communication about project key indicators & health during customer acquisition and product delivery life cycle. |
|
Ngunzi, Veronica Analysis of Energy Cost Savings by Substituting Heavy Fuel Oil with Alternative Fuel for a Pozzolana Dryer. Case Study of Bamburi Cement |
|
Niraj, Malay A case study on implementing lean ergonomic manufacturing systems (LEMS) in an automobile industry |
|
Noor-E-Alam, Md An ILP Model for Healthcare Facility Location Problem with Long Term Demand |
|
Data Analytics and Visualization in Analyzing Mortality Records |
|
Data Analytics and Visualization in Analyzing Mortality Records |
|
Healthcare Delivery Framework for Urgent Care at Home |
|
Ogbuke, Nnamdi The Role of Technology in Outsourcing Practices in Nigerian Oil and Gas Industry |
Top |
OGUNDARE, ADEBAYO Health and Usage Moitoring of Helicopter Gearbox: A Review |
|
Othman, Mohammad Framework for Implementing Quality Management in West Bank Construction Projects |
|
Otieno, Wilkistar Warranty Analysis of Remanufactured Electrical Products |
|
Ouyang, Shujun An ILP Model for Healthcare Facility Location Problem with Long Term Demand |
|
PARK, HYUNGJUNE Path planning for a mobile robot using ant colony optimization and the influence of critical obstacle |
Top |
PARSA, MOSLEM A study on how to improve PMBOK guidelines performance by simulation Case Study: National Gas Company of Lorestan province |
|
Performance Evaluation using Balanced Scorecard (BSC) and Fuzzy TOPSIS technique Case Study : National Iranian Gas Company |
|
Patel, Mehul R Data Analytics and Visualization in Analyzing Mortality Records |
|
Data Analytics and Visualization in Analyzing Mortality Records |
|
Patil, Rajendra Environmental Pollution Reduction in Cement Industry for Co2 combustion of Waste Tyre and Coal as a Fuel |
|
PATIL, SHRINIVAS Improving Quality of Technical Education by Quality Function Deployment (QFD) |
|
Pedersen, Anne Lean Process Improvement of First Case Scheduling in Operating Rooms |
|
Process Improvement Approach to Investigate Low Block Utilization of Operating Rooms: A Case Study |
|
Pereira Ferreira, Evelise Lean manufacturing and socio-technical and ergonomics practices implementation |
|
Phillips, Murray Mizen Boushi in Mass Production: a framework for maintaining reliability in a dynamic environment |
|
Prasetyanti, Layung Simulating Supplier-Producer Relationship in halal food Supply chain Using Agent Based Modeling |
|
Price, Brian Perceptions of the Implementation of Lean Six Sigma: A case of the U.K. and Nigerian Manufacturing Industries |
|
Purwandari, Titi Analysis of Accuracy Multivariate Control Chart T2Hotelling Free Distribution with Outlier Removal |
|
Qemo, Silvi Min-Max Appointment Scheduling Problem |
Top |
Qolipour, Mojtaba Investigation of using Solar Energy: A Case Study |
|
Qureshi, Shahzad A Way Forward to Attain Lean Manufacturing Status through Transformational Leadership |
|
Rahman, Md. Mizanur Sustainable Power Generation Pathways in Malaysia: Development of Long-range Scenarios |
Top |
Ramly, Edly Ferdin EMPIRICAL RESEARCH METHODOLOGY ON OPERATION DIAGNOSIS TO IDENTIFY OPERATION IMPROVEMENT OPPORTUNITIES |
|
Ranaweera, Buddhika Demographic influences on the adoption and use of e-government services in Sri Lanka |
|
RAO, SRINIVASA A case study on implementing lean ergonomic manufacturing systems (LEMS) in an automobile industry |
|
Rashed, Ahmad Framework for Implementing Quality Management in West Bank Construction Projects |
|
Identification of Challenges Facing Public Construction Industry in Palestine |
|
Rashid, Zahid AgiFlex System: An Approach towards Unification of Agility and Flexibility Dimensions from Manufacturing Perspective |
|
Roshani, Afshan Evaluating the Customer Retention and Satisfaction and the Reasons of Losing Customers in the Auto Insurance |
|
Investigating the Effectiveness of SMS Marketing in Increasing the Sale of Insurance in the Bank Branches (A Case Study) |
|
Sabzali, Hamid Evaluating the Customer Retention and Satisfaction and the Reasons of Losing Customers in the Auto Insurance |
Top |
Investigating the Effectiveness of SMS Marketing in Increasing the Sale of Insurance in the Bank Branches (A Case Study) |
|
sadique, Sarder Best Material for Commercial packaging of Food products and Incorporating Track and Trace systems |
|
Samsudin, Mohamed Syahril Nazreen Sustainable Power Generation Pathways in Malaysia: Development of Long-range Scenarios |
|
Sanchez, Joaquin Fernando Econometric models for decision making in IT services |
|
Sandhu, Maqsood Cloud-based Virtual Supply Chain |
|
Open Innovation through Virtual Business Network: Perspective from Small and Medium Enterprises |
|
Sattari, Sourena Multi Objective Optimization of Distributed Energy Systems Considering Renewable and Fossil Fuel Resources |
|
Technical and Economic Feasibility Study of Methanol Production from Flaring Gas in Iran |
|
Savsar, Mehmet Study and Analysis of Hazardous Conditions and Near Misses by Fault Trees |
|
Sawhney, Rupy Effects of Human Stress on Reliability of Lean Systems – a Markovian Approach |
|
Sengupta, Sankar A new individual patient centric demand forecasting method. |
|
Interaction Frame Works and Supply Chain System Reliability |
|
The Move It Forward Theory (MIFT) offers a better method to manage major machine failure in a serial flow line. |
|
Seo, Yoonho Path planning for a mobile robot using ant colony optimization and the influence of critical obstacle |
|
Seseni, Lawrance A framework for sharing knowledge within SMMEs: A South African Study |
|
Barriers of sharing tacit knowledge: A case of Gauteng agricultural SMMEs, South Africa |
|
Causes of poor quality on SMEEs: A Case of Gauteng SMEs, South Africa |
|
Seubert, Thomas Applying Marching Band Concepts to Develop High Performing Teams |
|
SHAH, ZAHID ABBASS An Investigation of Lean Manufacturing Implementation in Textile Industries of Pakistan |
|
Critical Success Factors for Successful Implementation of Six Sigma in Pakistani Industries |
|
Shahraniza , Tengku Workplace English: An Analysis of Communication Needs |
|
shakoor, Abdul Bio-diesel as an Alternative Fuel (Description, Benefits and Production Process) |
|
Effects of Temperature and Droplet Size on the Ignition Delay of Diesel and Bio-Diesel Blends |
|
Shamleh , Abd Al Fattah Identification of Challenges Facing Public Construction Industry in Palestine |
|
Shamsuzzaman, Mohammad Application of statistical process control chart for monitoring electric power losses through transmission and distribution system: a case study |
|
Shamsuzzoha, AHM Cloud-based Virtual Supply Chain |
|
Open Innovation through Virtual Business Network: Perspective from Small and Medium Enterprises |
|
Sharma, Deepa Interaction Frame Works and Supply Chain System Reliability |
|
Shetty, Devdas DEVELOPING A SYSTEM FOR SUSTAINABLE PRODUCT DESIGN AND MANUFACTURE |
|
Shi, Lihui Design of Experiments and Web Page Designs: Theories and Applications |
|
Predict the Click-Through-Rate and Average Cost Per Click for Keywords Using Machine Learning Methodologies |
|
Shibani, Abdussalam APPLICATION OF BALANCED SCORECARD IN THE LIBYAN CONSRUCTION INDUSTRY |
|
Shim, Sangoh Scheduling group of jobs with the dedicated processing property on parallel machine shops |
|
Shortt, Duane A Combined Analytical and Simulation-Based Approach to WIP Improvement |
|
A Structured Simulation-Based Methodology of Batch Size Optimization to Minimize Unit Cost |
|
Shrishrimal, Chaitanya Improving Quality of Technical Education by Quality Function Deployment (QFD) |
|
SINGH, NAVPREET NAV SMART BIKE |
|
Singh, Sarbjit An investigation into the dynamics of supply chain practices in Dairy industry: A Pilot Study |
|
Skeepers, Natalie Literature Review: Improving health and safety in the construction industry through cultural transformation |
|
Sonawane, Swapnil Improving Quality of Technical Education by Quality Function Deployment (QFD) |
|
Sopadang, Apichat Airport Connectivity Evaluation: The Study of Thailand |
|
Sorooshian, Shahryar Advancing Towards Delay-Free Construction Project: A Review |
|
An Environmental Impact Framework for Evaluating Construction Projects Delays |
|
Assessment of Environmental Risks in Construction Projects: A Case of Malaysia |
|
Lean Construction Tools |
|
Spadinger, Markus Development of construction catalog for appropriate design of fiber reinforced Polymers |
|
Stadler, Richter RELIABILITY ENGINEERING MANAGEMENT IN THE PETROCHEMICAL ENVIRONMENT: THE AIR SEPARATION UNIT |
|
Sukono, F An Efficient Approach for Traveling Salesman Problem Solution with Branch-and-Bound |
|
Supian, Sudradjat Analysis of Accuracy Multivariate Control Chart T2Hotelling Free Distribution with Outlier Removal |
|
Comparison Between the Models of GARCH and EGARCH in Predicting the Change of Composite Stock Price Index |
|
Supian, Sudradjat The APT with Lagged, Value-at-Risk and Asset Allocations by Using Econometric Approach |
|
Supian, Sukono Analysis of Accuracy Multivariate Control Chart T2Hotelling Free Distribution with Outlier Removal |
|
Comparison Between the Models of GARCH and EGARCH in Predicting the Change of Composite Stock Price Index |
|
The APT with Lagged, Value-at-Risk and Asset Allocations by Using Econometric Approach |
|
Suwanwong, Tipavinee Airport Connectivity Evaluation: The Study of Thailand |
|
Suyudi, Mochamad An Efficient Approach for Traveling Salesman Problem Solution with Branch-and-Bound |
|
Taghavifard, Mohammad Taghi Social Media Marketing: A Scientific Framework |
Top |
Taha, Hanan Identification of Challenges Facing Public Construction Industry in Palestine |
|
Telukdarie, Arnesh RELIABILITY ENGINEERING MANAGEMENT IN THE PETROCHEMICAL ENVIRONMENT: THE AIR SEPARATION UNIT |
|
Thaba, Sebonkile Possibilities of Sustainable Transport in the City of Johannesburg (CoJ) in South Africa |
|
Socio-economic Challenges within the Transport Sector Hindering Sustainable Transport in the City of Johannesburg |
|
Sustainable enterprise development through strategic sourcing within the transport sector of City of Johannesburg, South Africa |
|
thampi, hari krishnan Analysis of change management using SAP-LAP hills |
|
Tortorella, Guilherme Lean manufacturing and socio-technical and ergonomics practices implementation |
|
Relationship between lean manufacturing implementation and leadership styles |
|
Tovar, Nelson Supply System Design of a Lubricant Distributor Company in Colombia |
|
Tripathi, Anupam Productivity Mapping for a Reverse Logistics Warehouse with n series and m Parallel Processes |
|
Tsai, Chi-Ruei A meta-analysis of electronic sensors applying in inventions of young students |
|
Ullah, Saif Intelligent integrated MRP, MPS and Detail Scheduling |
Top |
Umude-Igbru, Oviri Perceptions of the Implementation of Lean Six Sigma: A case of the U.K. and Nigerian Manufacturing Industries |
|
Vafadarnikjoo, Amin An Intuitionistic Fuzzy-Based DEMATEL to Rank Risks of Construction Projects |
Top |
Vargas-hernández, José G MERGERS, ACQUISITIONS AND STRATEGIC ALLIANCES IN THE FILM INDUSTRY IN MEXICO |
|
verma, anoop Wastewater effluents & Optimizing Aeration Process |
|
Vital Soto, Alejandro A Binary Integer Programming Model for The Job Shop Scheduling Problem |
|
Wickramaarachchi, Deepthi A Decision Support Model to Select Suppliers In Apparel industry |
|
Yahya, Mohd Shahir EMPIRICAL RESEARCH METHODOLOGY ON OPERATION DIAGNOSIS TO IDENTIFY OPERATION IMPROVEMENT OPPORTUNITIES |
|
Yame, Ahmad Applications of Lean Methodologies and Quality Improvement in Textile Industry |
|
Challenges of Future Aircraft Propulsion Aircraft Electric Green Taxiing Intelligent System Rear View Camera, alarms and sensor |
|
Yang, Kai Wastewater effluents & Optimizing Aeration Process |
|
Ying Ying, Sia IMPROVING SEMICONDUCTOR BACK-END FINAL TEST THROUGHPUT VIA RFID-BASED LOT CONTROL SYSTEM |
|
Yuniarto, Hari Agung Optimisation in Cutting Down Parameters for Industrial Bamboo |
|
Yusof , Shari Sustained Quality Award Status in Developing Country: A study on the Dubai Quality Award Recipients |
|
Yusuf, Yahaya The Role of Technology in Outsourcing Practices in Nigerian Oil and Gas Industry |
|
Yzeiri, Andrea Composite Index Creation Using AHP: Efficiency Optimization for the Health Care Industry |
|
Zand, Ali Plasma Engineered Anti-Oxidant Surfaces as Novel Food Packaging Material |
Top |
Zghair, Hayder Empirical Correlation of Consistency and Time of Trajectory for Industrial Robots |
|
|
|