IEOM Toronto 2019
  • Home
  • Authors
  • Competitions
    • Undergraduate Student Paper Competition
    • Graduate Student Paper Competition
    • Master Thesis Competition
    • Doctoral Dissertation Competition
    • Senior Design Project Poster Competition
    • Undergraduate Research Competition
    • High School and Middle School STEM Competition
    • Lean Six Sigma Competition
    • Simulation Competition
    • Supply Chain and Logistics Competition
    • Poster Competition
  • Registration
  • Program
    • Lean Six-Sigma Green Belt Workshop
    • Proceedings
    • Proceedings-Full-Papers
  • Committee
  • Keynote
  • Global Engineering Education
  • Industry Solutions
  • Sponsors
    • Exhibition
  • Travels
    • NSF Student Travel Support
Home» Proceedings-Full-Papers

Proceedings-Full-Papers

Proceedings – Full Paper Only

4th North American IEOM Conference – Toronto, Canada 2019
ISSN: 2169-8767              ISBN: 978-1-5323-5950-7


ID 001   Vermicomposting of Commercial Bio waste as a Solution to Waste Management in a Bio Economy
M. Manyuchi, C. Mbohwa, E. Muzenda, BioEnergy and Environmental Technology Centre, University of Johannesburg, South Africa
T. N. Mutusva, Department of Mathematical Sciences, Harare Institute of Technology, Zimbabwe

ID 002   Assessing the Potential to Produce Shoe wax using Agricultural Waste Bio char as an Additive
M. Manyuchi, C. Mbohwa, E. Muzenda, BioEnergy and Environmental Technology Centre, University of Johannesburg, South Africa
Hondo, Department of Chemical and Process Systems Engineering, Harare Institute of Technology, Zimbabwe
M. Mpeta, Department of Environmental Engineering, School of Engineering, Chinhoyi University of Technology, Zimbabwe

ID 003   Use of Watermelon Seeds in Water Treatment
M. Manyuchi, C. Mbohwa, E. Muzenda, University of Johannesburg, South Africa
Chikomo, Department of Chemical and Process Systems Engineering, Harare Institute of Technology, Zimbabwe
C. Mbohwa, BioEnergy and Environmental Technology Centre, Department of Operations and Quality
Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
E. Muzenda, BioEnergy and Environmental Technology Centre, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa. and Department of Chemical, Materials and Metallurgical Engineering, Faculty of Engineering and Technology, Botswana International University of Science and Technology, Botswana

ID 007   Model-Based Engineering of a Process Wash Plant using SysML: Case study of beneficiation processes in a phosphate industry
Mariem Ait Bakader, Mohammed VI Polytechnic University, BENGUERIR, MOROCCO
Laurent Deshayes, Mohammed VI Polytechnic University, BENGUERIR, MOROCCO
Mohammed El Asri, Sidi Mohamed Ben Abdellah University, FES, MOROCCO

ID 014   Modeling of Enablers for Implementing ICT Enabled Wireless Control in Industry: an Integrated ISM and Fuzzy MICMAC Approach
Dr. Jayalakshmi.B, Instrumentation and Control Engineering Department, NSS College of Engineering, Palakkad, Kerala, India.
Haritha .H, Programmer Analyst, Cognizant Technology Solutions, Kochi, INDIA
Abijith Maniyeri, MENS, University of Southern Queensland, Toowoomba, AUSTRALIA

ID 018   Enhancement of Gaming Experience and Performance through an Ergonomically Designed Console Chair
Alma Maria Jennifer Gutierrez, Industrial Engineering, De La Salle University, Manila, Philippines
Lorenzo Cadiz, Industrial Engineering, De La Salle University, Manila, Philippines
Nathaniel Filoteo, Industrial Engineering, De La Salle University, Manila, Philippines
Ivan Juan, Industrial Engineering, De La Salle University, Manila, Philippines
Bryan Leopando, Industrial Engineering, De La Salle University, Manila, Philippines

ID 020   Supply Chain of Energy Resources and Its Alternatives Due to the Arab Spring: The Case of Egyptian Natural Gas Flow to Jordan
Moh’d Anwer AL-Shboul, Business Administration Department, Princess Sumaya University for Technology (PSUT), Amman, Jordan

ID 021   The Impact of effective work design and ergonomics on employee’s productivity in higher education institutions in Pretoria East, Gauteng
Mrs Thobile Yvonne Bhila, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa
Dr E I Edoun, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa
Professor C Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa

ID 022   The Impact of greening practices and employee productivity in the restaurant business in Johannesburg North, South Africa
Mrs Thobile Yvonne Bhila, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa
Dr E I Edoun, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa
Professor C Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Auckland Park, South Africa

ID 024   Techno-Economic Evaluation of Hybrid Power System in Rural Area of Sarawak, Malaysia
Chan Chun Yong, Universiti Teknologi Malaysia, Malaysia
Md. Mizanur Rahman, Universiti Teknologi Malaysia, Malaysia
Hasan Mohd Faizal, Universiti Teknologi Malaysia, Malaysia
Aminuddin Saat, Universiti Teknologi Malaysia, Malaysia
Mazlan Abdul Wahid, Universiti Teknologi Malaysia, Malaysia

ID 036   What Does Corporate Social Responsibility Encompass? A Literature Synthesis
Thatshayini, P., Treats Holdings Ltd., Acton, London
Damitha Rajini, Fathima Sabrina Nazeer, Department of Building Economics, University of Moratuwa, Sri Lanka

ID 040   Design and Simulation of Maize Sheller for Small Scale Farmers
Ignatio Madanhire, Department of Mechanical Engineering, University of Zimbabwe, Harare, Zimbabwe
Simon Chinguwa, Department of Mechanical Engineering, University of Zimbabwe, Harare, Zimbabwe
Elton Ntini, Department of Mechanical Engineering, University of Zimbabwe, Harare, Zimbabwe
Charles Mbohwa, Department of Quality Management and Operations Management, University of Johannesburg, South Africa.

ID 041   Use of Biogas as Alternative Fuel for Tobacco Curing: Case for Zimbabwe
Ignatio Madanhire, Department of Mechanical Engineering, University of Zimbabwe, Zimbabwe
Simon Chinguwa, Department of Mechanical Engineering, University of Zimbabwe, Zimbabwe
Tendai Sakala, Department of Mechanical Engineering, University of Zimbabwe, Zimbabwe
Charles Mbohwa, Department of Quality Management and Operations Management, University of Johannesburg, South Africa

ID 042   Productive Maintenance ‘s Autonomous Maintenance in Achieving Effectiveness: Case Study
Ignatio Madanhire, Department of Mechanical Engineering, University of Zimbabwe, Mount Pleasant, Harare, Zimbabwe
Kumbi Mugwindiri, Department of Mechanical Engineering, University of Zimbabwe, Mount Pleasant, Harare, Zimbabwe
Tawanda Mutenhabundo, Department of Mechanical Engineering, University of Zimbabwe, Mount Pleasant, Harare, Zimbabwe
Charles Mbohwa, Department of Quality Management and Operations Management, University of Johannesburg, South Africa

ID 044   Optimal Preventive Maintenance Strategy Using Reinforcement Learning
Mina Mikhail, Department of Mathematics and Industrial Engineering, Polytechnique Montréal, Canada
Soumaya Yacout, Department of Mathematics and Industrial Engineering, Polytechnique Montréal, Canada
Mohamed-Salah Ouali, Department of Mathematics and Industrial Engineering, Polytechnique Montréal, Canada

ID 045   Architectural Model of Implementation of Bulding Information Modeling – BIM in the Colombian Construction Industry
Camilo Andrés Vaca Pinilla, Diseñadores de Ambientes de Tecnología DATEC, Universidad Nacional de Colombia sede Bogotá, Colombia
Lina Nataly Alvarado Riaño, Diseñadores de Ambientes de Tecnología DATEC, Universidad Nacional de Colombia sede Bogotá, Colombia

ID 046   Implementation of Association Rule-Market Basket Analysis in Determining Product Bundling Strategy: Case Study of Retail Businesses in Indonesia
Zakka Ugih Rizqi, Department of Industrial Engineering, Islamic University of Indonesia, Yogyakarta, Indonesia

ID 051   Road Safety Modeling in Kuwait
Sharaf AlKheder, Civil Engineering Department, College of Engineering and Petroleum, Kuwait University, Safat, Kuwait.
Fahad AlRukaibi, Civil Engineering Department, College of Engineering and Petroleum, Kuwait University, Safat, Kuwait.
Ahmad Aiash, Civil Engineering Department, College of Engineering and Petroleum, Kuwait University, Safat, Kuwait.

ID 053   A Discrete Event Simulation logic for Semiconductor Production Planning and Control within Industry 4.0 Paradigm
Ahmed H. Sakr, Mathematics and Industrial Engineering Department École Polytechnique de Montréal Montréal, Canada
Soumaya Yacout, Mathematics and Industrial Engineering Department École Polytechnique de Montréal Montréal, Canada
Samuel Bassetto, Mathematics and Industrial Engineering Department École Polytechnique de Montréal Montréal, Canada

ID 056   Merging Logical Analysis of Data Models
Osama Elfar and Soumaya Yacout, Mathematical and Industrial Engineering Department, École Polytechnique de Montréal, Canada
Hany Osman, Systems Engineering Department, King Fahd University of Petroleum & Minerals, Kingdom of Saudi Arabia
Said Berriah, Research and Development Department, R2 Intelligent Technologies, Montréal, Canada

ID 057   Automatic welding process: a study case of Soldering Machine
Sandro Breval Santiago, Department of Administration and Management, Federal University of Amazonas Manaus, Amazonas, Brazil
Eduardo Luiz de Oliveira Almeida, Institute Calcomp of Techonology ICCT, Electrical Departament
Jonathan Oliveira Dias, Institute Calcomp of Techonology ICCT, Mechanical Departament

ID 059   Design of an Assessment Industry 4.0 Maturity Model: an application to manufacturing company
Americo Azevedo, Faculty of Engineering, University of Porto – INESC TEC – CESE, Porto, Portugal
Sandro Breval Santiago, Faculty of Social Studies, Federal University of Amazonas, Amazonas, Brazil

ID 061   Industrial Value Chain Research and Applications for Industry 4.0
Dr. Soumaya Yacout, Department of Mathematics and Industrial Engineering, Polytechnique Montreal, Montreal, Quebec, Canada

ID 062   Natural Language Processing System for Self-Reflection and Peer-Evaluation
Rui Wang, School of Electrical and Computer Engineering, Purdue University, IN, USA
Siqing Wei, School of Electrical and Computer Engineering, Purdue University, IN, USA
Matthew W. Ohland, School of Electrical and Computer Engineering, Purdue University, IN, USA
Daniel M. Ferguson, School of Electrical and Computer Engineering, Purdue University, IN, USA

ID 072   Overall equipment effectiveness optimisation for a reserves constrained underground coal mine in South Africa
Moeketsi Maimela, Post Graduate School of Engineering Management, University of Johannesburg, South Africa
Telukdarie Arnesh, Post Graduate School of Engineering Management, University of Johannesburg, South Africa

ID 073   Developing a framework for evaluation of a digital maintenance management system
Maleho M, Post Graduate School of Engineering Management, University of Johannesburg, South Africa
Telukdarie Arnesh, Post Graduate School of Engineering Management, University of Johannesburg, South Africa

ID 074   Sustainability of lean manufacturing principles in a production system
Qawekazi Sinxoto, Post Graduate School of Engineering Management, University of Johannesburg, South Africa
Telukdarie Arnesh, Post Graduate School of Engineering Management, University of Johannesburg, South Africa

ID 075   Maintenance strategy optimisation for load haul dumpers used in the South African underground hard rock mine
Mpho Manenzhe, Post Graduate School of Engineering Management, University of Johannesburg, South Africa
Telukdarie Arnesh, Post Graduate School of Engineering Management, University of Johannesburg, South Africa
Medoh Chuks, Post Graduate School of Engineering Management, University of Johannesburg, South Africa

ID 076   Implications of Industry 4.0 in Nigeria electoral system
Medoh Chuks and Telukdarie Arnesh, Post Graduate School of Engineering Management, University of Johannesburg, South Africa

ID 077   Exploring Industry 4.0 technologies as drivers of Lean and Agile Supply Chain Strategies
Ibrahim Raji, LIUC – Università Carlo Cattaneo, Italy
Tommaso Rossi, LIUC – Università Carlo Cattaneo, Italy

ID 078      An evaluation of the fourth industrial revolution adoption in manufacturing industries: An African context
Medoh Chuks and Telukdarie Arnesh, Post Graduate School of Engineering Management
University of Johannesburg

ID 080   Impact of Big data analytics on Innovation and Learning Performance
Surajit Bag, Faculty of Engineering and Built Environment, University of Johannesburg, South Africa
Arnesh Telukdarie, Faculty of Engineering and Built Environment, University of Johannesburg, South Africa

ID 081   Barriers to BDPA applications in Sustainable HSC Practices
Surajit Bag, Faculty of Engineering and Built Environment, University of Johannesburg, South Africa
Arnesh Telukdarie, Faculty of Engineering and Built Environment, University of Johannesburg, South Africa

ID 082   Allocation of Natural Gas to Consumption Sectors through Differential Price Paths
Farzaneh Daneshzand†, Ali Elkamel, Michael Fowlerϯ, and Mohammad Reza AminNaseriϯϯ
Department of Chemical Engineering, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates
ϯ Department of Chemical Engineering, University of Waterloo, Ontario, Canada
ϯϯ Industrial and Systems Engineering Faculty, Tarbiat Modares University, Tehran, Iran

ID 090   Data-driven Power generation Design and Operation under Demand Uncertainty
Mohammed Alkatheri1, Muhammad Rizwan2, Falah Alhameli1, Ali Elkamel1,2, Ali
Almansoori2, and Peter Douglas1
1 Department of Chemical Engineering, University of Waterloo, Ontario, Canada
2 Department of Chemical Engineering, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates

ID 099   A Stochastic Optimization Approach for Locating Humanitarian Disaster Relief Centers
Parmis Emadi, Department of Industrial Engineering, University of Windsor, Windsor, ON
Zbigniew J. Pasek, Department of Industrial Engineering, University of Windsor, Windsor, ON

ID 100   Aircraft Engine Remaining Useful Life Prediction Framework for Industry 4.0
Hussein A. Taha, Department of Mathematics and Industrial Engineering, Polytechnique Montréal, Canada
Ahmed H. Sakr, Department of Mathematics and Industrial Engineering, Polytechnique Montréal, Canada
Soumaya Yacout, Department of Mathematics and Industrial Engineering, Polytechnique Montréal, Canada

ID 101  Lean Manufacturing Maturity Model for an automotive cluster: a case study in Mexico
Hector David Colín-Lozano, Engineering Management Program, University of Monterrey, Nuevo León, México
Sonia Guerra-Loji, Engineering Management Program, University of Monterrey, Nuevo León, México
Martha Arely Vargas-Alvarado, Engineering Management Program, University of Monterrey, Nuevo León, México
Luz María Valdez-de la Rosa, Engineering Management Program, University of Monterrey, Nuevo León, México
Jesús Vázquez-Hernández, Engineering Management Program, University of Monterrey, Nuevo León, México

ID 105   The Importance of Quality Management System and Leadership in the South African Restaurant, Fast Food and Catering Sector – Case of the Gauteng Region
S.C. Mukwakungu, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
A.K. Lumbwe, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
D. Niati, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
C. Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa

ID 117   Factors That Contribute Towards Cost Overruns In An African Mega-Project
O.J Malebye, Department of Post Graduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
A. Telukdarie, Department of Post Graduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa

ID 119   User Experiences of the General Population on Accessible Web Interface
Jia Lin Cheoh, Department of Computer Science, Purdue University, West Lafayette, Indiana, USA
Jiaxin Wang, Department of Computer Engineering, Purdue University, West Lafayette, Indiana, USA
Zhibo Hou, Department of Electrical Engineering, Purdue University, West Lafayette, Indiana, USA
Siqing Wei, Department of Engineering Education, Purdue University, West Lafayette, Indiana, USA
Prof. Daniel Ferguson, Department of Engineering Education, Purdue University, West Lafayette, Indiana, USA
Prof. Matthew Ohland, Department of Engineering Education, Purdue University, West Lafayette, Indiana, USA

ID 120   Experimental Analysis of Program Motion Instruction of Industrial Robotics
Hayder Zghair, Engineering Department of Automated Manufacturing Systems, University of Baghdad, Baghdad.
Ahad Ali, A. Leon Linton Department of Mechanical Engineering, Lawrence Tech University, Southfield, MI, USA

ID 121   Medical tourism in Colombia: A documentary analysis of the components of economic, social and environmental sustainability
Oscar A. Vásquez-Bernal, School of Basic Science, Technology and Engineering, Universidad Nacional Abierta y a Distancia UNAD, Bogotá D.C, Colombia.
Benjamin Pinzón-Hoyos, School of Basic Science, Technology and Engineering, Universidad Nacional Abierta y a Distancia UNAD, Bogotá D.C, Colombia.
William E. Mosquera-Laverde, Faculty Administrative and Economic Sciences, Universidad Cooperativa de Colombia, Bogotá D.C, Colombia

ID 122   Advancing Digital Transformation: Integrated Digital Transformation Framework for a Successful Deployment
Munir Majdalawieh, Information Systems and Technology Management Department, Zayed University, Dubai, UAE

ID 125   An Evaluation of the Quality Management Systems (QMS) at a South African Electricity State Owned Company Compared to the Requirement of ISO 9001:2015
Sambil Charles Mukwakungu, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
Jonathan Eljadael Kasongo, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
Kidoge Ibrahimu, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa
Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, Johannesburg, South Africa

ID 135   Improved design of metered-dose inhaler techniques
Aezeden Mohamed, Department of Mechanical Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea
Peter Oyekola, Department of Mechanical Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea
John Pumwa, Department of Mechanical Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea

ID 136  Design and Construction of an Unmanned Ground Vehicle
Oyekola Peter, Department of Mechanical Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea
Prof. Nicholas Lambrache, Department of Mechanical Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea
Dr. Aezeden Mohamed, Department of Mechanical Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea
John Pumwa, Department of Mechanical Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea
Lidia Olaru, Jesta Group, Montreal, Quebec, Canada
Brian N’Drelan, Department of Mechanical Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea
Ebere Chuma, Department of Mechanical Engineering, Bells University of Technology, Ogun state, Nigeria

ID 137   New Class of Simple and Efficient Clustering Algorithms for Multiscale Mathematical Programming with Demand Data Applications
Falah Alhameli, University of Waterloo, Canada.
Ali Elkamel, University of Waterloo, Canada.
Mohammed Alkatheri, University of Waterloo, Canada.
Alberto Betancourt-Torcat, University of Waterloo, Canada.
Ali Almansoori, Khalifa University, Abu Dhabi, UAE

ID 140   System Dynamics as a Solution in Increasing Regional Cash of Daerah Istimewa Yogyakarta by Considering Employment Availability and Traffic Congestion
Zakka Ugih Rizqi, Department of Industrial Engineering, Islamic University of Indonesia, Yogyakarta, Indonesia

ID 141   Fuzzy AHP-based Study of Barriers to the Implementation of Cleaner Production in Textile Industry
Farzana Islam, Ahmed Shoyeb Raihan, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh

ID 142   Modeling of Supply Chain Risk in the Leather Industry
Ahmed Shoyeb Raihan, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology Dhaka, Bangladesh
Farzana Islam, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology Dhaka, Bangladesh
Syed Mithun Ali, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology Dhaka, Bangladesh

ID 144   Improving Modeling and Forecasting of Fuel Selling Price Using Support Vector Machines: Case Study
Zineb Aman, Moulay Ismail University Meknes, Morocco
Haj EL MOUSSAMI, Moulay Ismail University Meknes, Morocco
Younes Fakhradine EL BAHI, Moulay Ismail University Meknes, Morocco
Latifa Ezzine, Moulay Ismail University Meknes, Morocco

ID 146   Renewable Waste Water and Filtration System with Phytoremediation Used in Aquaculture of Freshwater Ornamental Fish
Charlotte Palao, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Glyda Aricon Marquez, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Kenneth Ibasco, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Lady Claudette Ferrer, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Patricia Sagge, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Maria Teresa B. Mendoza, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines

ID 148   Development and validation of future-robust strategies: A system for a continuous strategy development and strategy review process using the sports car development as an example
Florian Marthaler, Karlsruhe Institute of Technology, Kaiserstr, Germany
Alen Rapo, Karlsruhe Institute of Technology, Kaiserstr, Germany
Markus Spadinger, Karlsruhe Institute of Technology, Kaiserstr, Germany
Albert Albers, Karlsruhe Institute of Technology, Kaiserstr, Germany
Andreas Siebe, ScMI – Scenario Management International AG, Klingenderstraße, Paderborn, Germany

ID 149   The influence of early stage project performance: Some project performance and outcome correlate
Hong Long Chen, Department of Business and Management, National University of Tainan, Tainan, Taiwan

ID 150   Establishment of Magnetic Levitation for Flood Prevention in Jakarta with Project Management Approach
Zakka Ugih Rizqi, Department of Industrial Engineering, Islamic University of Indonesia, Yogyakarta, Indonesia
Bella Aziz Dewanti Putri, Department of Industrial Engineering, Islamic University of Indonesia, Yogyakarta, Indonesia
M Iqbal Sabit, Department of Industrial Engineering, Islamic University of Indonesia, Yogyakarta, Indonesia
Shelly Elvina Salsabila, Department of Industrial Engineering, Islamic University of Indonesia, Yogyakarta, Indonesia

ID 151   Product Design Development of Ergonomic Mop: ANOMALI (An Ergonomic Mop for Healthy Life)
Zakka Ugih Rizqi, Department of Industrial Engineering, Islamic University of Indonesia Yogyakarta, Indonesia
Nurahlun Baet, Department of Industrial Engineering, Islamic University of Indonesia Yogyakarta, Indonesia

ID 155   The Difference between Teams with No Female Students and Teams with Female Students for Peer Evaluation Behavior in Engineering Education
Chuhan Zhou, Department of Engineering Education, Purdue University, West Lafayette, USA
Sunjae Choi, Department of Engineering Education, Purdue University, West Lafayette, USA
Behzad Beigpourian, Department of Engineering Education, Purdue University, West Lafayette, USA
Siqing Wei, Department of Engineering Education, Purdue University, West Lafayette, USA
Daniel M Ferguson, Department of Engineering Education, Purdue University, West Lafayette, USA
Matthew W Ohland, Department of Engineering Education, Purdue University, West Lafayette, USA

ID 156   Implementation of Analytics Procedures to Predict Stock-Outs in store for a retailer. A case in Mexico
Cinthya Yaresi Tamez Silva, Business Management Engineering Department, University of Monterrey
Ana Patricia Sepúlveda González, Business Management Engineering Department, University of Monterrey
Martín Flores Maradiaga, Business Management Engineering Department, University of Monterrey
Juan Ignacio González Espinosa, Business Management Engineering Department, University of Monterrey

ID 157   A System Dynamics Model of Apparel Supply Chain Under Mass Customization
Marwa Issa, Fashion Design Department, Faculty of Arts and Design, Pharos University In Alexandria, Alexandria, Egypt.
Sherwet Elgholmy, Textile Engineering Department & Industrial Engineering, Faculty of Engineering, Alexandria University, Egypt
Aida Sheta, Textile Engineering Department & Industrial Engineering, Faculty of Engineering, Alexandria University, Alexandria, Egypt
M. Nashat Fors, Textile Engineering Department & Industrial Engineering, Faculty of Engineering, Alexandria University, Alexandria, Egypt

ID 158   A Lean Six Sigma Project to Reduce Waste and Variability in a Confectionery Manufacturing
José Daniel Ibarra, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, México
Andrés Robles, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, México
Alejandro Montemayor, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, México
Angel Iñiguez, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, México
Andrés Blanco, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, México
Alexis Torrecillas, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, México

ID 159   Composite Index Creation Using AHP and DEA: Efficiency Optimization for Industries
Andrea Irina Yzeiri, Odette School of Business, Management Science, University of Windsor, Windsor, Canada
Dr. Fazle Baki, Odette School of Business, Management Science, University of Windsor, Windsor, Canada

ID 160   Design of new plant layout using lean tools by eliminating wastes in material flow process
Sriram Srinivasan, Department of Mechanical Engineering, University of Windsor, Windsor, Canada
Harita Zikre, Department of Mechanical Engineering, University of Windsor, Windsor, Canada

ID 161   Analysis of Important conditions for supporting Logistics Cluster Integration
Teresa Verduzco-Garza, Engineering & Technologies School, University of Monterrey, San Pedro Garza García, Mexico

ID 162   Unravelling the Stereotypes of Women in Industrial Engineering
Elaiza E. Bautista, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Glyda Aricon B. Marquez, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Sheila May P. Gappi, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Jaypy T. Tenerife, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines
Maria Teresa B. Mendoza, Industrial Engineering Department, Technological Institute of the Philippines, Quiapo Metro Manila, Philippines

ID 166   Optimal Operation of Cogeneration Plants in Industrial Facilities
Azadeh Maroufmashat, Department of Chemical Engineering, University of Waterloo, 200 University Avenue West, Waterloo, Canada
Nicholas Preston, Department of Chemical Engineering, University of Waterloo, 200 University Avenue West, Waterloo, Canada
Michael Fowler, Department of Chemical Engineering, University of Waterloo, 200 University Avenue West, Waterloo, Canada
Ali Elkamel, Department of Chemical Engineering, University of Waterloo, 200 University Avenue West, Waterloo, Canada, Department of Chemical Engineering, Khalifa University, Abu Dhabi, UAE

ID 167   An Optimization Strategy for Managing Surplus Electricity through P2G Pathways
Lingyi Gu, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Jeeyoung Kim, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Joohyung Ko, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Azadeh Maroufmashat, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Michael Fowler, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Ali Elkamel, Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada

ID 168   Stator Teeth Pairing Design of Dual Radial Flux Permanent Magnet Generator for Cogging Torque Minimization
Jin-Hyung Yoo, Kyungnam University, South Korea
Seon-Hwan Hwang, Kyungnam University, South Korea
Tae-Uk Jung, Kyungnam University, South Korea

ID 180   Technology-Push based Product Engineering based on Future Scenarios: Application for deriving product strategies at BMW AG
Florian Marthaler, IPEK – Institute of Product Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
Bo Hu, IPEK – Institute of Product Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
Albert Albers, IPEK – Institute of Product Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany

ID 181   A Lower Bound Analysis for the Flowshop Scheduling Problem with Makespan Minimization
Bruno de Sousa Alves, Electrical Engineering Department, Polytechnique de Montréal Montréal, Canada
Carlos Ernani Fries, Department of Production and Systems Engineering, Federal University of Santa Catarina, Florianópolis, SC, Brazil

ID 182   A review of Warehouse Performance in South African Manufacturing Sector
Nakedi Macdonald Magoro, Emmanuel Innocents Edoun, University of Johannesburg, South Africa

ID 185   Sustainability Issues in Sputtering Deposition Technology
F.M. Mwema, Department of Mechanical Engineering Science, University of Johannesburg, South Africa
E.T. Akinlabi, Department of Mechanical Engineering Science, University of Johannesburg, South Africa & Department of Mechanical Engineering Covenant University, Ota, Nigeria
O.P. Oladijo, Department of Chemical, Botswana International University of Science and technology, Botswana

ID 186   Exploring the Effect of RF Power in Sputtering of Aluminum Thin films-A Microstructure Analysis
F.M. Mwema, Department of Mechanical Engineering Science, University of Johannesburg, South Africa
E.T. Akinlabi, Department of Mechanical Engineering Science, University of Johannesburg, South Africa & Department of Mechanical Engineering Covenant University, Ota, Nigeria
O.P. Oladijo, Department of Chemical, Botswana International University of Science and technology, Botswana

ID 199  Multi-Feature Usability Testing on Internet of Things-based Smart Gym Machine with All in One Concept Using Nielsen’s Heuristics
Zakka Ugih Rizqi, Department of Industrial Engineering, Islamic University of Indonesia Yogyakarta, Indonesia

ID 200   Identification of Dominant Customer Behavior Patterns among Different Sectors over Time; A Case Study
Shaya Sheikh, Department of Operations and Supply Chain Management, New York Institute of Technology, NY, USA
Vahid Kayvanfar, Department of Industrial Engineering, Amirkabir University of Technology, Tehran, Iran
Iman Gharib, Department of Management and Economic, Science and Research Branch Azad University, Tehran, Iran
Sahar Bigdeli, Department of Management, Economic and Accounting, Azad university of Tabriz, Tabriz, Iran

ID 202   Vehicle Routing Challenges in the Automotive Supply Chain
Robert R. Inman, Chief Data and Analytics Office General Motors Company, Warren, MI, USA
Rana Afzali-Baghdadabadi, Global Purchasing and Supply Chain General Motors Company, Warren, MI, USA
Baiyang Liu, Global Purchasing and Supply Chain General Motors Company, Warren, MI, USA

ID 203   An Affordable and Portable Technology for Real-Time Scheduling of Appliances in Smart Homes
A. Raman, Department of Industrial and Enterprise Systems Engineering, University of Illinois at Urbana-Champaign, Urbana, USA
R. Sowers, Department of Industrial and Enterprise Systems Engineering, University of Illinois at Urbana-Champaign, Urbana, USA
R. S. Sreenivas, Department of Industrial and Enterprise Systems Engineering, University of Illinois at Urbana-Champaign, Urbana, USA

ID 204   Assessing the Preparedness of Technology Business Incubators to Provide Services Aligned to the 4th Industrial Revolution: A South African perspective
Phumuza Langa, University of Johannesburg, South Africa
E.I Edoun, University of Johannesburg, South Africa
C. Mbohwa, University of Johannesburg, South Africa

ID 205   The Influence of nanostructured-TiC Coating on the Mechanical Properties of Ti6Al4V Alloys Grown by RF Magnetron Sputtering
O O Abegunde, Department of Mechanical Engineering Science, University of Johannesburg, Johannesburg, South Africa
E T Akinlabi, Department of Mechanical Engineering, Covenant University, Ota, Nigeria
P Oladijo, Materials and Metallurgical Engineering, Botswana International University of Science and Technology, Palapye, Botswana.

ID 207   TIG & MIG Hybrid Welded Steel Joint: A Review
Stephen Akinwale Akinlabi, Department of Mechanical & Industrial Engineering, University of Johannesburg,
South Africa & Department of Mechanical Engineering, Covenant University Ota, Nigeria
Madindwa P. Mashinini, Department of Mechanical & Industrial Engineering, University of Johannesburg,
South Africa & Department of Mechanical Engineering, Covenant University Ota, Nigeria
Olawale S. Fatoba, Department of Mechanical Engineering Science, University of Johannesburg, South Africa
Esther T. Akinlabi, Department of Mechanical Engineering Science, University of Johannesburg, South Africa
Cynthia S. Abima, Department of Mechanical Engineering Science, University of Johannesburg, South Africa

ID 208   Evaluating Impacts of Coal Mining on South African environment: a step to actualizing society 4.0
Stephen Akinwale Akinlabi, Department of Mechanical & Industrial Engineering, University of Johannesburg,
South Africa & Department of Mechanical Engineering, Covenant University Ota, Nigeria
Madindwa P. Mashinini, Department of Mechanical & Industrial Engineering, University of Johannesburg,
South Africa & Department of Mechanical Engineering, Covenant University Ota, Nigeria
Augustin Madouma Ma Lewandja, Department of Quality and Operations Management, University of Johannesburg, South Africa
Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, South Africa
Paul A. Adedeji, Department of Mechanical Engineering Science, University of Johannesburg, South Africa
Olawale S. Fatoba, Department of Mechanical Engineering Science, University of Johannesburg, South Africa
Esther T. Akinlabi, Department of Mechanical Engineering Science, University of Johannesburg, South Africa

ID 209  Risk investigation in Non-Compliance of Organizational Processes and Staffs with Strategy Implementations
Virginia Harris, Department of Quality and Operations Management, University of Johannesburg, South Africa
Charles Mbohwa, Department of Quality and Operations Management, University of Johannesburg, South Africa
Stephen Akinwale Akinlabi, Department of Mechanical & Industrial Engineering, University of Johannesburg,
South Africa & Department of Mechanical Engineering, Covenant University Ota, Nigeria
Madindwa P. Mashinini, Department of Mechanical & Industrial Engineering, University of Johannesburg,
South Africa & Department of Mechanical Engineering, Covenant University Ota, Nigeria
Paul A. Adedeji, Department of Mechanical Engineering Science, University of Johannesburg, South Africa
Olawale S. Fatoba, Department of Mechanical Engineering Science, University of Johannesburg, South Africa
Esther T. Akinlabi, Department of Mechanical Engineering Science, University of Johannesburg, South Africa

ID 210   Influence of Ethical Aspects on the Construction Industry Performance in Egypt
Mohamed Ahmed Azzab, Production Engi­neering Department, Faculty of Engineering, Alexandria University, Egypt
Mohamed Wagih Badawi, Production Engi­neering Department, Faculty of Engineering, Alexandria University, Egypt

ID 212   Decontamination of heavy metals in water aligned with Operational Excellence
Jacobo Tijerina Aguilera, Consulting and Research Division, Universidad de Monterrey, México
Nancy Lucero Tapia Ruíz, Consulting and Research Division, Universidad de Monterrey, México
María Guadalupe Moreno Treviño, Basic Sciences, Universidad de Monterrey, San Pedro Garza García, Nuevo León, México

ID 213  Decontamination of heavy metals in water with orange peel in México
Jacobo Tijerina Aguilera, Consulting and Research Division, Universidad de Monterrey, México
Nancy Lucero Tapia Ruíz, Consulting and Research Division, Universidad de Monterrey, México
María Guadalupe Moreno Treviño, Basic Sciences, Universidad de Monterrey, San Pedro Garza García, Nuevo León, México

ID 214   Empirical Modeling and Multi-Attribute Optimization of Al7075 Using Response Surface Methodology-Based Desirability Approach
Sadaf Zahoor, Department of Mechanical, Automotive, and Materials Engineering, University of Windsor, Windsor, Canada
Walid Abdul-Kader, Department of Mechanical, Automotive, and Materials Engineering, University of Windsor, Windsor, Canada
Adeel Shehzad, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, Pakistan
Muhammad Zain, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, Pakistan
Shoaib Muzaffar, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, Pakistan
Hamza Ijaz, Department of Industrial and Manufacturing Engineering, University of Engineering and Technology, Lahore, Pakistan

ID 227   Implementing IoT for the Detection of Production Machine Failures
Ahmed Badwelan, Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia
Moath Alatefi, Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia
Atef M. Ghaleb, Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia
Ali M. Alsamhan, Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia
Shafiq Ahmad, Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia

ID 229   Development of an Instrument to Assess the Performance of Systems Engineers
Niamat Ullah Ibne Hossain, Department of Industrial and Systems Engineering, Mississippi State University, USA
Morteza Nagahi, Raed Jaradat, Department of Industrial and Systems Engineering, Mississippi State University, USA
Raed Jaradat, Department of Industrial and Systems Engineering, Mississippi State University, USA
Charles Keating, Department of Engineering Management and Systems Engineering, Old Dominion University, VA, USA

ID 230   Impact of a Cloud-Based Applied Supply Chain Network Simulation Tool on Developing Systems Thinking Skills of Undergraduate Students
Jeanne-Marie Lawrence, Department of Industrial and Systems Engineering, Mississippi State University, USA
Niamat Ullah Ibne Hossain, Department of Industrial and Systems Engineering, Mississippi State University, USA
Morteza Nagahi, Department of Industrial and Systems Engineering, Mississippi State University, USA
Raed Jaradat, Department of Industrial and Systems Engineering, Mississippi State University, USA

ID 232   Developments in Conventional Machining for Sustainability-A State of Art Review
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa

ID 233   Analysis and Optimization of Surface Roughness while Machining SS304 using Green Lubricant
Neeraj Sharma, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa

ID 234   Tool Texturing and Machinability of Nickel-based Superalloys- A Review
Adam Khan M, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa

ID 235   Analysis and Optimization of MRR in Powder-mixed EDM of AISI 5160 Steel
Neeraj Sharma, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa

ID 236   A Systematic literature review of Digital Transformation
Mohamed-Iliasse Mahraz, Département Génie industriel, Ecole Mohammadia d’Ingénieurs, Mohammed V University of Rabat, Morocco
Loubna Benabbou, Département Sciences de la Gestion, Université du Québec à Rimouski (UQAR) Campus de Lévis, Québec, Canada
Abdelaziz Berrado, Département Génie industriel, Ecole Mohammadia d’Ingénieurs, Mohammed V University of Rabat, Morocco

ID 255   Lean Management and Analysis – An Empirical Study of a Traditional Shipbuilding Industry in Indonesia
Yugowati Praharsi, Shipbuilding Institute of Polytechnic Surabaya, Jl. Teknik Kimia Kampus ITS, Indonesia
M. Abu Jami’in, Shipbuilding Institute of Polytechnic Surabaya, Jl. Teknik Kimia Kampus ITS, Indonesia
Gaguk Suhardjito, Shipbuilding Institute of Polytechnic Surabaya, Jl. Teknik Kimia Kampus ITS, Indonesia
Hui-Ming Wee, Chung Yuan Christian University, Chung Pei, Chung Li City, Taiwan

ID 271   Industrial Engineering Students’ Perceptions of Flipped Classroom Experience
Ammar Aamer, Faculty of Engineering and Technology, Department of Industrial Engineering, Sampoerna University, Jakarta, Indonesia
Nesrine EL-Zine, Faculty of Arts and Humanities, Sana’a University, Sana’a Yemen

ID 272   A Novel Mathematical Programming Approach for Aggregate Proportioning: A Case Study for Highway Construction
Anil Kumar Agrawal, Civil Engineering Department, Indian Institute of Technology (BHU), VARANASI, INDIA
Devendra Mohan, Civil Engineering Department, Indian Institute of Technology (BHU), VARANASI, INDIA

ID 274   Influence of Wood Fly Ash Reinforcement on the Wear Behaviour of Friction Stir Processed Aluminium-Based Surface Matrix
Omolayo M. Ikumapayi, University of Johannesburg, South Africa
Esther T. Akinlabi, University of Johannesburg, South Africa
Jyotsna D. Majumdar, Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur, INDIA
Oluseyi P. Oladijo, University of Johannesburg, South Africa
Stephen. A. Akinlabi, University of Johannesburg, South Africa

ID 279     A Project Based Learning Tool for Industry 4.0 Manufacturing Engineering Education
Kapil Gupta, University of Johannesburg, Johannesburg, South Africa
Doctor Mukhawana, University of Johannesburg, Johannesburg, South Africa
Madindwa Mashinini, University of Johannesburg, Johannesburg, South Africa

ID 283   Customer Satisfaction Survey of Quality Management System in the Medical Industry
Sihle Mankazana, Department of Quality and Operations Management, University of Johannesburg, South Africa
Matimba Davis Mabasa, Department of Quality and Operations Management, University of Johannesburg, South Africa
Temosho Bapela, Department of Quality and Operations Management, University of Johannesburg, South Africa
Rush Mpho Maphosa, Department of Quality and Operations Management, University of Johannesburg, South Africa
Sambil Charles Mukwakungu, Department of Quality and Operations Management, University of Johannesburg, South Africa

ID 284   Entrepreneurial Aspiration Among Office Technology And Management Students Of Federal Polytechnic Kaura Namoda Zamfara State, Nigeria: The Contribution Of Entrepreneurship Education And Social Networks
Maikudi Shehu Musawa, Department of Technology Management, Faculty of Technology Management and Business
Universiti Tunn Hussein Onn Malaysia
Kamilah Ahmad, Department of Technology Management, Faculty of Technology Management and Business
Universiti Tunn Hussein Onn Malaysia

ID 298   A Novel Framework for Calculating the Maintenance Improvement Factor Based on Human Error Factors and Unbiased Expert Judgment
Rogelio Emmanuel Jáuregui Miramontes, Centre for Management of Technology and Entrepreneurship, University of Toronto, Canada
Pasi Petteri Luukka, School of business, Lappeenranta University of Technology, Lappeenranta, Finland
Yuri A. Lawryshyn, Centre for Management of Technology and Entrepreneurship, University of Toronto, Toronto, Canada

ID 299  Barriers to the Achievement of Sustainable Construction Project in Nigeria
Sanmi Olowosile, Department of Quantity Surveying, Federal University of Technology Akure, Nigeria
Ayodeji Oke, Sustainable Human Settlement and Construction Research Centre, University of Johannesburg, South Africa
Clinton Aigbavboa, Sustainable Human Settlement and Construction Research Centre, University of Johannesburg, South Africa

ID 300   Drivers for Adoption of Automation and Robotics in the Construction Industry
Ayodeji Oke, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Clinton Aigbavboa, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Olayinka Omole, Department of Quantity Surveying, Federal University of Technology, Akure, Ondo State, Nigeria.

ID 301   Optimal Microgrid Sizing Incorporating Machine Learning Forecasting
Saheed Lekan Gbadamosi, Department of Electrical and Electronic Engineering, University of Johannesburg, South Africa
Nnamdi I. Nwulu, Department of Electrical and Electronic Engineering, University of Johannesburg, South Africa

ID 302   Combination of Corncob, Cornhusk, and Kirinyuh (Eupatorium odoratum L.) Leaf Extract as Materials of Anti-Termite Paper
Sigit Trimayanto, Departement of Chemistry, State University of Surabaya, Surabaya, Indonesia
Prestylia Ikke Kurnia Mayasari, Departement of Chemistry, State University of Surabaya, Surabaya, Indonesia
Faraqanita Dwi Novianti, Departement of Chemistry, State University of Surabaya, Surabaya, Indonesia
Dian Novita, Departement of Chemistry, State University of Surabaya, Surabaya, Indonesia

ID 304   A Study on Carbon Footprint
Omoniyi Durojaye, University of Johannesburg, RSA, South Africa
Timothy Laseinde, University of Johannesburg, RSA, South Africa
Ifetayo Oluwafemi, University of Johannesburg, RSA, South Africa

ID 305   Job Rotation model in production centers to reduce ergonomic risks due to work
Amirsalar Malekahmadi, Isfahan University of Technology, Iran
Mohsen Soleymani, Industrial Engineering Department, Islamic Azad University of Arak, Arak, Iran
Somaye tianimoghadam, Chemical Department, Lorestan University, Lorestan, Iran

ID 307   Incorporate Data Analytics Tools to Optimize the SLP Method with Application to a Plant of a Leading Global Company
Edgar M. A. Granda-Gutiérrez, Universidad De Monterrey, Mexico
Frida Aizaneth Sevilla Medina, Universidad De Monterrey, Mexico
Laura Valeria González Aguirre, Universidad De Monterrey, Mexico
Silvia Stephanie Arreola Castillo, Universidad De Monterrey, Mexico

ID 309   Kinematics and Jacobian analysis of a three DOF sufficiently actuated large scale cable-driven robot with insufficient actuated structure
Kambiz Ghaemi Osgouie, Mechanical Engineering Department, Caspian Faculty of Engineering, University Of Tehran
Assal Haqiqat Pars, Mechanical Engineering Department, Caspian Faculty of Engineering,  University Of Tehran
Ali ElKamel, Department of Chemical Engineering, University of Waterloo, Waterloo, Canada.
Azadeh Maroufmashat, Department of Chemical Engineering, University of Waterloo, Waterloo, Canada.

ID 310   Renewable energy expansion in Africa: An Overview of South Africa and Nigeria as a case study
Omoniyi Durojaye, Postgr School of Engineering Management, University of Johannesburg, RSA, South Africa
Timothy Laseinde, Postgr School of Engineering Management, University of Johannesburg, RSA, South Africa
Ifetayo Oluwafemi, Postgr School of Engineering Management, University of Johannesburg, RSA, South Africa

ID 316   Review of Warehouse Performance in South African Manufacturing Sector
Tshepo Phuti Mabotja, Faculty of Business and Management Sciences, Cape Peninsula University of Technology, South Africa
Ebrahim Parker, Faculty of Business and Management Sciences, Cape Peninsula University of Technology, South Africa

ID 317   The Nexus between Finance and Agricultural Productivity in Nigerian’s agricultural sector
Jesusetemi Oluwafemi, Department of Quality and Operations Management, University of Johannesburg, South Africa
Pule Kholopane, Department of Quality and Operations Management, University of Johannesburg, RSA, South Africa
Ifetayo Oluwafemi, Postgraduate School of Engineering Management, University of Johannesburg, RSA, South Africa
Esther T. Akinlabi, Department of Mechanical Engineering Science, University of Johannesburg, RSA, South Africa

ID 318   Apparel supply chain optimization by developing e-commerce: An impact analysis
Shibbir Ahmad, Dhaka University of Engineering and Technology (DUET), Gazipur, Bangladesh.
Md. Kamruzzaman, Dhaka University of Engineering and Technology (DUET), Gazipur, Bangladesh.
Md.Salim Hossain, Department of CSE, Uttara University, Uttara,Dhaka, Bangladesh
Md.Mijanur Rahman, Department of CSE, Uttara University, Uttara,Dhaka, Bangladesh

ID 319  Supply chain optimization in apparel manufacturing
Shibbir Ahmad, Mechanical Engineering Department, Dhaka University of Engineering Technology, Gazipur, Bangladesh.
Md. Kamruzzaman, Mechanical Engineering Department, Dhaka University of Engineering Technology, Gazipur, Bangladesh.
Mahathir Mohammad Bappy, Industrial and Production Engineering, Shah Jalal University of Science & Technology, Sylhet, Bangladesh.

ID 320   An Application of Industry 4.0 in Agriculture in Nigeria
Jesusetemi Oluwafemi, Department of Quality and Operations Management, University of Johannesburg, RSA, DFC Campus, South Africa.
Pule Kholopane, Department of Quality and Operations Management, University of Johannesburg, RSA, DFC Campus, South Africa.
Ifetayo Oluwafemi, Department of Quality and Operations Management, University of Johannesburg, RSA, DFC Campus, South Africa.
Esther T. Akinlabi, Department of Mechanical Engineering Science, University of Johannesburg, RSA, APK Campus, 2006, South Africa

ID 324   On Minimum Cost Non-Uniform Sampling Schemes for Optimal Design of Control Charts:‎ Application to X ̅ and ‎T^2 Control Charts
Mojtaba Aghajanpoorpasha, University of Calgary‎, ‎Calgary‎, ‎Canada
Rob Deardon, University of Calgary‎, ‎Calgary‎, ‎Canada

ID 327   Evaluation assessment of Warehouse Performance in Manufacturing Industries
Macdonald Nakedi Magoro, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Dr Emmanuel Edoun, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa

ID 346   Zack Algorithm: A Heuristic Approach to Solve Transportation Problem
Zakka Ugih Rizqi, Department of Industrial Engineering, Islamic University of Indonesia, Yogyakarta, Indonesia

ID 348   The Limited use of Information Technology on Services and Learning at Iqra Buru University
M Chairul Basrun Umanailo, Department of Agricultural and Forestry, University of Iqra Buru, Namlea, 97 571, Indonesia
Ahad Ali, Leon Linton Department of Mechanical Engineering, Lawrence Technological University, Southfield, MI, USA

ID 350  Public Relations Management Strategy through Management by Objective (MBO) of PT Kereta Api Operational Area 7 Madiun Indonesia Tulungagung Station
M Chairul Basrun Umanailo, Department of Agricultural and Forestry, University of Iqra Buru, Namlea, Indonesia
Andiwi Meifilina, Universitas Islam Balitar, Indonesia
Ahad Ali, Leon Linton Department of Mechanical Engineering, Lawrence Technological University, Southfield, MI, USA

ID 358   Supply chain optimization with Genetic Algorithm focusing on right supplier selection at real time in apparel manufacturing
Shibbir Ahmad, Mechanical Engineering Department, DUET,Bangladesh
Md.Kamruzzaman, Mechanical Engineering Department, DUET,Bangladesh

ID 361   Humans’ Perceptions of Handwritten Digits Generated by a Generative Adversarial Network
Jia Lin Cheoh, Department of Computer Science, Research Center for Open Digital Innovation, Purdue University, Indiana, USA
Sabine Brunswicker, Research Center for Open Digital Innovation, Purdue University, West Lafayette, Indiana, USA

ID 378 Transforming industrial engineering course content using an industry 4.0 MOOC based feedback approach
Rosine, Mouchou Tchamdjeu, Mechanical & Industrial Engineering Department, University of Johannesburg, Johannesburg, South Africa
Prof. Tien-Chien Jen, Mechanical Engineering Science, University of Johannesburg, Johannesburg, South Africa
DPhil: Mechanical Engineering, University of California
Opeyeolu Timothy Laseinde, Mechanical & Industrial Engineering Department, University of Johannesburg, Johannesburg, South Africa

ID 379   An Overview of Design Considerations for 3-wheel Vehicle Safety Improvement, considering Supplementary Restraint Systems industrial revolution
Rosine, Mouchou Tchamdjeu, Mechanical & Industrial Engineering Department, University of Johannesburg, Johannesburg, South Africa
Prof. Tien-Chien Jen, Mechanical Engineering Science, University of Johannesburg, Johannesburg, South Africa
DPhil: Mechanical Engineering, University of California
Opeyeolu Timothy Laseinde, Mechanical & Industrial Engineering Department, University of Johannesburg, Johannesburg, South Africa

ID 386   Implementation of Six Sigma in Service Industry in Cyrenaica, Libya: A Case Study
Salem Lakrash, Leon Linton Department of Mechanical Engineering, Lawrence Technological University, Southfield, MI, USA
Ahad Ali, Leon Linton Department of Mechanical Engineering, Lawrence Technological University, Southfield, MI, USA
Duane Shortt, Leon Linton Department of Mechanical Engineering, Lawrence Technological University, Southfield, MI, USA

ID 387   Reducing Variation at the Measuring System for the Copper Harpin Quality Inspection in Handling Material Stations
Regina Márquez Reynoso, Instituto Tecnológico y de Estudios Superiores de Monterrey, Querétaro, México
Sara Renata González Cruz, Instituto Tecnológico y de Estudios Superiores de Monterrey, Querétaro, México
Juan Carlos Espinoza, Instituto Tecnológico y de Estudios Superiores de Monterrey, Querétaro, México

ID 388   Optimization of a Parallel Robot 2RRR, Based on Metaheuristic Optimization Using Genetic Algorithms, Evaluating the Global Performance Index System for Kinematic.
Javier Sanjuan de Caro, Department of Mechanical Engineering, University of Wisconsin Milwaukee, USA
Mohammad Habibur Rahman, Department of Mechanical Engineering, University of Wisconsin Milwaukee, USA
Elias Muñoz Montenegro, Department of Mechanical Engineering, Universidad del Norte, Barranquilla, Colombia
Miguel Padilla Ramirez, Department of Mechanical Engineering, Universidad del Norte, Barranquilla, Colombia

ID 389   Application of Lean Manufacturing for Improving the Process at Blue sky Machining Corp.
Anvesh Rajak, Department of Mechanical and Industrial Engineering, University of Windsor, Windsor, Canada
Maganjot Singh Dhami, Department of Mechanical and Industrial Engineering, University of Windsor, Windsor, Canada

ID 390   Finite-Element modeling of Thermo-Mechanical phenomena in friction stir welding of AISI 4340 steel
Olanipekun Ayorinde Tayo, Department of Mechanical and Industrial Engineering, University of Johannesburg, South Africa
Timothy O. Laseinde, Department of Mechanical and Industrial Engineering, University of Johannesburg,
Nthabiseng Maledi, School of chemical and Metallurgical Engineering, University of Witwatersrand, Johannesburg, South Africa,
Madindwa Mashinini, Department of Mechanical and Industrial Engineering, University of Johannesburg

ID 391   Binary Alloy Simulation: A phase-field model study using semi Implicit Fourier spectral Algorithm
Olanipekun Ayorinde Tayo, Department of Mechanical and Industrial Engineering, University of Johannesburg, South Africa
Timothy O. Laseinde, Department of Mechanical and Industrial Engineering, University of Johannesburg
Nthabiseng Maledi, School of chemical and Metallurgical Engineering, University of Witwatersrand, Johannesburg, South Africa
Madindwa Mashinini, Department of Mechanical and Industrial Engineering, University of Johannesburg, South Africa

ID 404   Gap Analysis of Indonesian State-Owned Bank Internet Banking Website
Mahir Pradana, Telkom University, Jalan Terusan Buah Batu, Bandung, 40257, Indonesia
Wahyuddin S., AMIK Lamappapoleonro, Lalabata Rilau, Lalabata, Soppeng, 90812, Indonesia
Syarifuddin Syarifuddin, Telkom University, Jalan Terusan Buah Batu, Bandung, 40257, Indonesia
Adrianza Putra, Hasanuddin University, Jalan Perintis Kemerdekaan KM 10, Makassar, 90245, Indonesia

ID 405   Cycle Time Reduction in the Plastic Fuel Tanks Production Line: A Lean Manufacturing Case Study at Kautex Corporation
Faranak Sadeghitabar, Department of Mechanical, Automotive and Material Engineering, University of Windsor, Canada
Sardar Asif Khan, Department of Mechanical, Automotive and Material Engineering, University of Windsor, Canada
Hasti Eiliat, Department of Mechanical, Automotive and Material Engineering, University of Windsor, Canada

ID 406   Towards Optimization by Matching of Response Surfaces: finding Windows of Maximal Similarity
Veronica Diaz Pacheco, The Applied Optimization Group at Mayagüez, Industrial Engineering Department, University of Puerto Rico, PR, USA
Mary Carmen Acosta Cervantes, The Applied Optimization Group at Mayagüez, Industrial Engineering Department, University of Puerto Rico, PR, USA
Mauricio Cabrera-Ríos, The Applied Optimization Group at Mayagüez, Industrial Engineering Department, University of Puerto Rico, PR, USA

ID 432  Novel Optimization Model to decision making to investment in the industry with regard to the role of Unique Value-added to optimizing the total expected cost
Javad Khamisabadi, Islamic Azad University, Tehran, Iran and Founder & CEO of World Academy of Science and Technology, Erzurum, Turkey
Mahmud Majd, Logistic Engineering Manager, IKCO, Tehran, Iran
Mohsen Naghedi Baradaran, Vice president, IKCO, Tehran, Iran
Mohammad Reza Motamed, IKCO- Peugeot CEO, Tehran, Iran
Mohammad Rouhina, Systems Director, IKCO, Tehran, Iran

ID 433  Prioritizing the key factors on Performance Measurement System (PMS) in Automotive Industry   (Case Study: TONDAR 90 Deputy, Iran Khodro Company, Tehran, Iran)
Javad Khamisabadi, PhD in Industrial Management, Islamic Azad University, Tehran, Iran, Founder & CEO of World Academy of Science and Technology, Erzurum, Turkey
Mahmud Majd, Logistic Engineering Manager, IKCO, Tehran, Iran
Mohsen Naghedi Baradaran, Vice president, IKCO, Tehran, Iran
Mohammad Reza Motamed, IKCO- Peugeot CEO, Tehran, Iran
Mohammad Rouhina, Systems Director, IKCO, Tehran, Iran

ID 434    Neural Network and Internet of Things Implementation to aid Pedestrian Safety
Ujjwal Khanna, Concordia University, Concordia Institute for Information Systems Engineering (CIISE), Montreal, QC
Anjali Awasthi, Concordia University, Concordia Institute for Information Systems Engineering (CIISE), Montreal, QC

ID 435   Utilizing the blockchain technology as an effective means for supply chain traceability
Egbuonu Chinedu, Concordia Institute of Information and System Engineering, Concordia University, Montreal, Quebec, Canada
Prof Anjali Awasthi, Concordia Institute of Information and System Engineering, Concordia University, Montreal, Quebec, Canada

ID 436   Cartesian Trajectory Based Control of Dobot Robot
Md Rasedul Islam, BioRobotics Lab, University of Wisconsin-Milwaukee, Milwaukee, WI 53211, USA
Md Arifur Rahaman, BioRobotics Lab, University of Wisconsin-Milwaukee, Milwaukee, WI 53211, USA
Md Assad-uz-Zaman, BioRobotics Lab, University of Wisconsin-Milwaukee, Milwaukee, WI 53211, USA
Mohammad Habibur Rahman, BioRobotics Lab, University of Wisconsin-Milwaukee, Milwaukee, WI 53211, USA

ID 439   Design of an autonomous electric vehicle for assistance in the movement of people with visual disabilities using vision algorithms and artificial intelligence
Juan José Encinas, Universidad Ricardo Palma, Chorrillos, Lima, Peru
Mario Chauca, Universidad Ricardo Palma, Chorrillos, Lima, Peru

ID 440   Using of Optimal Simulation Modelling to Reduce Radiotherapy Cancer Waiting Time and Improve Survival
Malakeh Saberi, Concordia Institute for Information Systems Engineering (CIISE), Concordia University, Montreal, QC, Canada
Anjali Awasthi, Concordia Institute for Information Systems Engineering (CIISE), Concordia University, Montreal, QC, Canada

ID 465  Efficiency as a Variable Intervening in Activity Based Management of Change Order and Economic Value Added to Improve Project Cost Performance on Building Construction
Budi Witjaksana, Department Civil Engineering,  Surabaya University, Surabaya, Indonesia
Ahad Ali, A. Leon Linton Department of Mechanical Engineering, Lawrence Technological University
Southfield, MI 48075, USA

ID 466 Reasons Subak Concerving Irrigation Water Resources
Euis Dewi Yuliana, University of Hindu Indonesia, Denpasar, Bali, Indonesia
Putu Desiana Wulaning Ayu, University of Hindu Indonesia, Denpasar, Bali, Indonesia
Gede Angga Pradipta, University of Hindu Indonesia, Denpasar, Bali, Indonesia
Ahad Ali, A. Leon Linton Department of Mechanical Engineering, Lawrence Technological University
Southfield, MI 48075, USA

ID 467  Sustaining Traditional Irrigation System through Ecotourism Development: Case of Subak of Sembung, Denpasar, Bali, Indonesia
Gede Sedana, Faculty of Agriculture, Dwijendra University, Indonesia
Ahad Ali, A. Leon Linton Department of Mechanical Engineering, Lawrence Technological University
Southfield, MI 48075, USA

ID 468 Model Child’s Inheritance Law Towards Business Assets in Intermarriage, of an Autralian and Indonesian Citizen
I Dewa Ayu Maheswari Adiananda,  Faculty of Law, Universitas Airlangga, Indonesia
Chintya Dewi R.S, Faculty of Law, Universitas Airlangga, Indonesia
Nikmah Mentari, Faculty of Law, Universitas Airlangga, Indonesia
Dyah Arinta Renaningtyas, Faculty of Law, Universitas Airlangga, Indonesia
Sri Eka Wulandari,  Faculty of Law, Universitas Airlangga, Indonesia
I Gede Eggy Bintang Pratama,  Faculty of Law, Universitas Airlangga, Indonesia
Nur Alfiani,  Faculty of Law, Universitas Airlangga, Indonesia
Resi Puspitosari, Faculty of Law, Universitas Airlangga, Indonesia
Ahad Ali, A. Leon Linton Department of Mechanical Engineering, Lawrence Technological University
Southfield, MI 48075, USA

ID 469 Developing DC Motor Control Module Using PLC as PLC Learning Media in Electrical Engineering UNESA, Indonesia
Puput Wanarti Rusimamto, Faculty of Engineering, Universitas Negeri Surabaya, Indonesia
Munoto, Faculty of Engineering, Universitas Negeri Surabaya, Indonesia
Muchlas Samani, Faculty of Engineering, Universitas Negeri Surabaya, Indonesia
Ekohariadi, Faculty of Engineering, Universitas Negeri Surabaya, Indonesia
Endryansyah, Faculty of Engineering, Universitas Negeri Surabaya, Indonesia
Dadang Suprayitno, Faculty of Engineering, Universitas Negeri Surabaya, Indonesia
Ahad Ali, A. Leon Linton Department of Mechanical Engineering, Lawrence Technological University
Southfield, MI 48075, USA

ID 470  Utilization of Google Spreadsheets as Activity Information Media at the Official Site Alphabet Incubator
Qurotul Aini, Universitas Raharja, Tangerang, Indonesia
Untung Rahardja, Universitas Raharja, Tangerang, Indonesia
Indri Handayani, Universitas Raharja, Tangerang, Indonesia
Marviola Hardini, Universitas Raharja, Tangerang, Indonesia
Ahad Ali, A. Leon Linton Department of Mechanical Engineering, Lawrence Technological University,
Southfield, MI 48075, USA

ID 472  The Cost Of Occupational Safety And Health (OSH) In Construction Project
Risma Marleno, Department of Civil Engineering, Construction Management Master Program, Universitas, Surabaya, Indonesia
Hanie Teki Tjendani, Department of Civil Engineering, Construction Management Master Program, Universitas, Surabaya, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 473 The effect of Turtle Blanket to the Baby’s Behavior in Early Breastfeeding Initiation
Sudarmi, Health Polythecnic Tanjungkarang, Midwifery Dept., Bandar Lampung, Lampung, Indonesia
Supriatiningsih, Health Polythecnic Tanjungkarang, Midwifery Dept., Bandar Lampung, Lampung, Indonesia
Nora Isa Tri Novadela, Health Polythecnic Tanjungkarang, Midwifery Dept., Bandar Lampung, Lampung, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 480   Design and Development of the Trailers Optimal Allocation and Schedule Model in the Supply Chain System with Considering Cross-Dock with Stochastic Planning
Javad Khamisabadi, Ph.D student, Faculty of Management, Firuzkuh Branch, Islamic Azad University, Tehran, Iran
Mohammad Reza kabaranzad Ghadim, Faculty of Management, Central Tehran Branch, Islamic Azad University, Tehran, Iran
Hasan Ali Aghajani Kasegar, Professor, Faculty of Management, Mazandaran University, Iran
Mohammad Mahdi Movahedi, Assistant professor, Faculty of Management, Firuzkuh Branch, Islamic Azad University, Tehran, Iran

ID 481   Review of Affective Factors on Performance Measurement in Supply Chain Management System (Case Study: Iran Khodro Co, Iran)
Javad Navaei, North Tehran Branch, Islamic Azad University, Tehran, Iran
Mohammad Reza Kabaranzad Ghadim, Central Tehran Branch, Islamic Azad University, Tehran, Iran
Javad Khamisabadi, Islamic Azad University, Tehran, Iran and Founder & CEO of World Academy of Science and Technology, Erzurum, Turkey

ID 486   Capacity Planning and Optimization for a National Painting Factory using Simulation Modeling and Lean Manufacturing Tools
Nabeel Mandahawi, Nedal Ismail and Omar Wahdan, Department of Logistics and Supply Chain Management, Humber Institute of Technology and Advanced Learning, Toronto, Canada

ID 487   Empirical Evaluation of Smart Phones Data Entry Using Four Different Keyboards
Nosaiba Dar Mousa, State University of New York at Binghamton, Binghamton, USA
Nabeel Mandahawi, Humber Institute of Technology and Advanced Learning, Toronto, Canada

ID 488 Comparative Analysis in Sales Forecasting: Classical Methods and Neural Networks
Ghita Benboubker, School of Science and Engineering, Al Akhawayn University, Ifran, Morocco
Ilham Kissani, School of Science and Engineering, Al Akhawayn University, Ifran, Morocco
Asmae Mourhir, School of Science and Engineering, Al Akhawayn University, Ifran, Morocco

ID 489 Model of Teaching Style Toward Crawl Swimming Result Study
Surya Adi Saputra, Higher School Of Teacher Training and Pedagogy Kusumanegara Jakarta, Indonesia
Abdul Sukur, Faculty of Sports Science, Universitas Negeri Jakarta, Indonesia
James Tangkudung, Physical Education Post Graduate Program, Universitas Negeri Jakarta, Indonesia
Firmansyah Dlis, Physical Education Post Graduate Program, Universitas Negeri Jakarta, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 490   The Influence of Leadership on Academic Quality Assurance at the Private Nursing Vocational Schools
Susi Hartati, Departement of Education Management, Universitas Negeri Jakarta, Indonesia and Departement of Nursing, STIKes Mitra Keluarga, Bekasi Timur, Indonesia
Mukhneri Mukhtar, Matin, Departement of Education Management, Universitas Negeri Jakarta, Jakarta Timur, Jakarta 13220, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 491  The Government Expenditure Impact on the Private Investment, Economic Growth, and Poverty in Maluku Province
Tri Wahyuningsih, The Faculty of Economy, University of Iqra Buru, Namlea, Maluku, 97571, Indonesia
Mohammad Bugis, The Faculty of Economy and Business, Pattimura University, Ambon, Maluku, 92711, Indonesia
Abdul Talib Bon, The Faculty of Technology Management and Business, Universiti Tun Hussein, Malaysia

ID 492   The Effect Of Leg Muscle Power Flexibility And Achievement Motivation On Long Jump Ability
Zihan Novita Sari, Moch. Asmawi, Achmad Sofyan Hanif, and James Tangkudung, State University of Jakarta, Department of Physical Education, Jalan Rawamangun Muka, Pulo Gadung, East Jakarta city, Special Capital Region of Jakarta 13220 Indonesia.
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 493    Model Teaching Style and Motor ability on Sport Science Student Achievement Learning Outcome Sepak Takraw
Zulkifli, Universitas Islam Riau, Jalan Kharuddin Nasution No 113, Pekanbaru, Riau 28284 Indonesia
Moch. Asmawi and Ahcmad Sofyan Hanif, Universitas Negeri Jakarta, Jalan Rawamangun Muka, Jakarta 13220 Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia

ID 502   Managing a green building architecture for sustainable energy consumption by system approach
Fatima Sadat Ghaderi, School of Architecture, College of Fine arts, University of Tehran
S. F. Ghaderi, School of Industrial Engineering, College of Engineering, University of Tehran

ID 505      Short-range Electric Cars Used in Multi-Hour Travels: Is Vehicle Electrification in Western New York and Western Pennsylvania Progressing?
Douglas W.E. Ferrier, College of Technology, Indiana State University, Terre Haute, IN. USA

ID 506 Analysis of Personal Area Networks for ZigBee Environment Using Random Early Detection-Active Queue Management Model
Ekele A. Asonye and Sarhan M. Musa, Electrical and Computer Engineering Department, Prairie View A&M University, Texas, USA

ID 509   Locating using clustering and capabilities of GIS (case study: Bank)
Sara Aryaee, Management Department, University of Tehran, Tehran, Iran

ID 515   Process Improvement in a Plastic Manufacturing Industry using Six Sigma Tools
Kaustubh Kale, A. Leon Linton Department of Mechanical Engineering, Lawrence Technological University, Southfield, MI, USA

 

© IEOM Society International - IEOM 2019 - Web Design by Suvro Sudip