IEOM 2018
  • Home
  • Authors
  • Program
    • Pre-Conference Workshops
  • Registration
  • Committee
  • Competitions
    • Undergraduate Paper Competition
    • Graduate Paper Competition
    • Master Thesis Competition
    • Doctoral Dissertation Competition
    • Capstone Poster Competition
    • Undergraduate Research Competition
    • High School and Middle School STEM Competition
    • PLM and Simulation Competition
    • Poster Competition
  • Keynote
  • Global Engineering Education
  • Industry Solutions
  • Sponsors
    • Exhibition
  • Travels
Home» Proceedings

Proceedings

Proceedings – 8th IEOM Bandung 2018

ISSN: 2169-8767 (U.S. Library of Congress)                          ISBN: 978-1-5323-5944-6


ID 13           Increasing Ambulance Capacity with a Lean TOC Approach

Bernardo Villarreal, Fernando González Aleu, Arturo Quezada, Gabriela Morales and Aracely Carranza, Universidad de Monterrey San Pedro Garza Garcia, N.L., Mexico

ID 15           Waste Cooking Oil as an Energy Source

John Y. Pumwa, Papua New Guinea University of Technology Papua New Guinea

ID 16           Input uncertainty quantification on supply chain simulation optimization using Bayesian view

Mansur Maturidi Arief, University of Michigan Ann Arbor

ID 17           A System Dynamic Approach of Patient Satisfaction in India’s Leading Healthcare

Maria S. Sebastin, School of Business, Amrita Vishwa Vidyapeetham, Bengaluru, Karnataka, India
Mridula Sahay, Amrita School of Business, Amrita Vishwa Vidyapeetham University, Coimbatore, Tamil Nadu, India

ID 18           Environmental Impact Assessment for Setting up a Biogas Plant

M. M. Manyuchi, C. Mbohwa and E. Muzenda, BioEnergy and Environmental Technology Centre, University of Johannesburg, South Africa

ID 19           Linear and Exponential Kinetic Modelling for Biogas Production in Municipal Waste

M. Manyuchi, C. Mbohwa and E. Muzenda, BioEnergy and Environmental Technology Centre, University of Johannesburg, South Africa

ID 20           Techno-economic Feasibility for Recovering Biogas in a Bio augmented Municipal Sewage Plant

M. Manyuchi, C. Mbohwa and E. Muzenda, BioEnergy and Environmental Technology Centre, University of Johannesburg, South Africa

ID 21           STEM Approach on Playing Video Games

Mason Chen, Six Sigma Black Belt, Stanford Online High School, CA, USA

ID 22           Use of improvement heuristics for solving a Vehicle Routing Problem: The case of a Moroccan company

Imane MOUFAD and Fouad JAWAB, Laboratory of Manufacturing, Energy and Sustainable Development College of Technology, Fez, Morocco

ID 23           A methodology for measuring the ecological footprint of freight transport in urban areas: a case study of a Moroccan City

Imane MOUFAD and Fouad JAWAB, Sidi Mohamed Ben Abdellah University, Fez, Morocco

ID 27           Road Transport Problems in Morocco: Discernment and Classification

Kawtar Akoudad and Fouad Jawab, Sidi Mohamed Ben Abdellah University, Fez, Morocco

ID 28           A Demonstration of the Difference between Binomial and Hypergeometric in Statistics

Yvanny Chang, Morrill Learning Center, San Jose, CA, USA

ID 29           Statistical Pi Simulation by Java

Katherine Lim, Eleanor Murray Fallon Middle School, CA, USA

ID 31           Hospital logistics activities

Fouad Jawab, Youness Frichi and Said Boutahari, Sidi Mohamed Ben Abdellah University, Fez, Morocco

ID 32           Reducing The Capacitated Lot Sizing Problem (CLSP) With Set Up, Production, Shortage And Inventory Cost  To CLSP With Set Up Production and Inventory Cost

Prof. RRK Sharma and Vinayak A. Drave, Department of Industrial Engineering, IIT Kanpur, India

ID 34           Measuring the impact of freeway infrastructure on the accessibility of the city of Fez

Imane MOUFAD and Fouad JAWAB, Sidi Mohamed Ben Abdellah University, Fez, Morocco
Ismail AIT FASKA, Engineer in the field of the computing specialized in the logistics, in particular the air transport

ID 38           Remodelling the process flow of the metal division assembly line

Joshua Wong Kha Choon and Olugu Ezutah Udoncy, UCSI University Wilayah Persekutuan Kuala Lumpur, Malaysia

ID 39    Recent progress in the Use of Atomic Force Microscopy (AFM) Techniques in Biomedical Applications

Ayesha Siddiqua and Zahid Hossain, Arkansas State University, Jonesbor, Arkansas, USA

ID 40           Towards Assessment of Innovation in SMEs with Decision Analysis Concepts

Mohmood Al Kindi and Sami Al Kharusi, Sultan Qaboos University Muscat, Oman

ID 41           A Comparison of Ambulance Location Models in Two Mexican Cases

Edgar Granda, Bernardo Villarreal and Gabriela Morales, Universidad de Monterrey San Pedro Garza García, N.L., México
Yazmin Maldonado Instituto Tecnológico de Tijuana Tijuana, Mexico

ID 42           A Goal Programming Model for Nurse Scheduling at Emergency Department

Nasr Al-Hinai, Noor Al-Yazidy, Anfal Al-Hooti and Ekhlas Al-Shereiqi, Department of Mechanical & Industrial Engineering, Sultan Qaboos University Muscat, Oman

ID 45           Lean Manufacturing Adoption in the Transport and Logistics Sector of Thailand – An Exploratory Study

Jose Arturo Garza-Reyes and Simon Peter Nadeem, University of Derby Derby, UK
Sarita Tangkeow, The University of Warwick Coventry, UK
Vikas Kumar, Bristol Business School University of the West of England Bristol, UK

ID 46    Innovation and Growth in Family-Owned Mexican SMEs

Gonzalo Maldonado-Guzmán and Sandra Yesenia Pinzón-Castro Centro de Ciencias Económicas y Administrativas Universidad Autónoma de Aguascalientes Aguascalientes, Ags, México
Jose Arturo Garza-Reyes, University of Derby, Derby, UK
Juan Mejía-Trejo, Centro Universitario de Ciencias Económicas y Administrativas Universidad de Guadalajara Zapopan, Jalisco, México
Vikas Kumar, Bristol Business School University of the West of England Bristol, UK
Simon Peter Nadeem, University of Derby, Derby, UK

ID 47           Analysis Heterogeneous Human Sensory Data from Product Exterior Design Using BRSM

Muhammad Reza Do. Bagus, School of Information Management and Computer Tidore Mandiri,Indonesia
Muhammad Fikri Do. Bagus, Information Engineering Department Gunadarma, University, Indonesia

ID 48           The use of artificial intelligence techniques for the Diagnosis of periodontal disease by clinical indices

Farzad Firouzi Jahantigh and Samin Arbabi, Industrial Engineering Department Sistan and Baluchestan University Zahedan, Iran

ID 49           Work-Related Musculoskeletal Discomforts among College Teachers: An Assessment

Engr. Ryan Jeffrey P. Curbano, ASEAN Eng, Maria Cristina Victoria C. Bagos, Melanie L. Corpus, Aira P. Lusterio, Industrial Engineering Department Lyceum of the Philippines Laguna

ID 51           Performance Evaluation and Organization of New Product in Indonesia Manufacturing Firms

Evo Sampetua Hariandja, Department of Management, Business School Universitas Pelita Harapan Tangerang, Indonesia

ID 52           An Engineering Model for Healthcare Devices to Control, Detect, and Diagnose Medical Errors

Farzad Firoozi gahantigh and Atefeh Batani, Department of Industrial Engineering University of Sistan and Baluchestan, Zahedan, Iran

ID 53           Impact of Internal Driver on Implementation of GSCM Practice

Aries Susanty, Diana Puspita Sari, Dyah Ika Rinawati, Lutfi Setiawan, Department of Industrial Engineering, Diponegoro University, Tembalang, Semarang, Indonesia

ID 54           Effective Heuristics for the Bicriteria Scheduling Problem of Minimizing Total Tardiness and Total Flow Time with Zero Release Dates

Saheed Akande, Department of Mechanical and Mechatronics Engineering, Afe Babalola, University, Ado-Ekiti. Nigeria
Ayodeji. E. Oluleye, Department of Industrial and Production Engineering, University of Ibadan, Ibadan. Nigeria.
E.O. Oyetunji, Department of Mechanical Engineering, Lagos State University, Lagos. Nigeria

ID 55           Linking the Innovation Capability and Innovation Outcome: an Exploratory Investigation of the Hotel Industry

Evo Sampetua Hariandja, Department of Management, Business School, Universitas Pelita Harapan, Tangerang, Indonesia

ID 56           Green human resource management, Green supply chain management practices and Sustainable performance

Abdul Talib Bon and Ahmed A. Zaid Production and Operations Management Department,
Universiti Tun Hussein Onn, Parit Raja, Johor, Malaysia

ID 58           Assessing the Impact of Input Model Misspecification on Integrated Supply Chain Decisions

Ejim-Eze, Emmanuel, Institute of Engineering, Technology and Innovation Management, University of Port Harcourt, Nigeria

ID 60           Success Factors of a Performance Excellence Model: A Hospital Case Study

Fernando Gonzalez Aleu, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, NL, Mexico

ID 61           The Challenges of Cyclic Steam Stimulation (CSS) to Enhanced Oil Recovery (EOR) in Sudanese Oil Field

Husham A. Elbaloula and Dr. Tagwa A. Musa, Sudan University of Science and Technology, Petro-Energy-E&P, PDOC & PE Tower, Khartoum, Sudan

ID 62           Saving behaviors for retirement among government officers at Sirindhorn College of Public Health, Praboromarjchanok Institute, Public Health Ministry

Rujee Charupash Department of Geneducation, Sirindhron College of Public Health Khon Kaen Province, Thailand

ID 63           Passive Isolation of Vibrations in Stone Cutting process

Ahmed Abu Hanieh and Ahmad Albalasie, Department of Mechanical and Mechatronics Engineering, Birzeit University, Palestine

ID 64           A New Formulation of Multi item Lot Sizing Problem with Set up, Inventory and Shortage Costs

Prof. RRK Sharma and Priyank Sinha, Department of Industrial Engineering, IIT Kanpur, India

ID 65           Optimising Service Centre Competitiveness using Lean Enterprise Philosophy and Simulation Techniques

Grace Mukondeleli Kanakana and Olasumbo Ayodeji Makinde, Faculty of Engineering and the Built Environment, Tshwane University of Technology Pretoria West, South Africa

ID 67           Optimizing Protection Decision in Railway Systems

Girish Ch. Dey, Mamata Jenamani, Department of Industrial & Systems Engineering, Indian Institute of Technology, Kharagpur, West Bengal, India

ID 68           Improving Teamwork Quality to Succeed Software Development Project Using AHP (Case study)

Garda Satria, Devi Pratami and Ika Arum Puspita, Industrial Engineering Faculty, Telkom University, Jawa Barat, Indonesia

ID 69           Using the Delphi method to verify a framework to implement sustainability initiatives

Bruno Gallotta, Jose Arturo Garza-Reyes and Anthony Anosike, Centre for Supply Chain Improvement, University of Derby, Derby, UK

ID 70           Supplier selection using two phases model

Gamal Mohamed Nowara, Mohammad Abdel Halim Mansour and Ghada Mohamed Abdel Salam, Industrial Engineering Department, Zagazig University, Cairo, Egypt

ID 72           Multi-Criteria Decision Making Optimization for Reverse Supply Chains

Bandar A. Alkhayyal, Department of Engineering Management, College of Engineering, Prince Sultan University, Riyadh, Saudi Arabia

ID 73           Carbon Emissions Policies Impact on Reverse Supply Chain Network

Bandar A. Alkhayyal, Department of Engineering Management, College of Engineering, Prince Sultan University, Riyadh, Saudi Arabia

ID 76           A system-dynamics based model for implementing theory of constraints on healthcare systems

Mohamed Grida, Mahmoud Zeid and M. Adel El-Baz, Industrial Engineering Department, Faculty of Engineering, Zagazig University, Zagazig, Egypt

ID 78           Performance-Based Contracts for Energy Efficiency Projects

Liang Ding, University of Michigan, Stephen M. Ross School of Business
Sam Aflaki, HEC Paris – Operations Management and Information Technology
Roman Kapuscinski, University of Michigan, Stephen M. Ross School of Business

ID 79           Re-formulating the theoretical principles of lean manufacturing in the Fourth Industrial Revolution:  A Grounded Theory Approach

Eldon Caldwell, Smart, Lean and Cognitive Systems Laboratory, Industrial Engineering Department, University of Costa Rica, San José, Costa Rica

ID 80           Implementation of Lean Manufacturing System to Eliminate Wastes on the Production Process of Line Assembling Electronic Car Components with WRM and VSM Method

Muhammad and Yadrifil, Department of Industrial Engineering (IE UI), Faculty of Engineering, Industrial Engineering Department, Fakultas Teknik – Universitas Indonesia, Depok

ID 81           Reinforcement Learning Based Buffer Allocation Problem on Complex Production Lines

Vina Sari Yosephine and Young Jae Jang, Department of Industrial and Systems Engineering, Korea Advanced Institute of Science and Technology, Daejeon, South Korea

ID 82           The Impact of Transactional Leadership on Employees’ Performance through the mediation of job satisfaction in Malaysian’s Telecommunication sector

Abdul Talib Bin Bon, Department of Technology Management and Business, University Tun Hussein Onn Malaysia
Ali Orozi Sougui, 2Université de N’Djamena, Tchad

ID 86           Productivity Improvement in Assembly Line by Reduction Cycle Time using Time Study at Automotive Manufacturer

Abdul Talib Bon and Siti Nor Aini Samsudin, Production and Operations Management Department, Universiti Tun Hussein Onn, Parit Raja, Johor, Malaysia

ID 87           Influence of Inventory and Work In Process Adjustment Time on Production Target Achievement of D Minus 1 Production Scenario: A Case Study of Hospital Bed Production

Susanto Sudiro, Magister Teknik Mesin Universitas Pancasila Jakarta, Indonesia
Sha’ri Mohd Yusof, Razak School of Engineering and Advanced Technology, Universiti Teknologi Malaysia Kuala Lumpur
Revino, Post Graduate Program, Institut Sains dan Teknologi Nasional Jakarta, Indonesia

ID 89           Determine the Influenced Factors of Facebook Ads Adoption by SMEs

Aulia F. Hadining and Sukanta, Industrial Engineering Department, State University of Singaperbangsa Karawang, Karawang, Indonesia

ID 90           Heuristics for Maximizing the Total Weight of Just-In-Time Jobs under Multi-Slot Conditions

Ryo Saito and Eishi Chiba, Graduate School of Science and Engineering, Hosei University, Koganei-shi, Tokyo, Japan

ID 91           Attitudes towards Road Safety among Pre-drivers: The Case of Qatar

Semira O. Mohammed, Khalifa N. Al-Khalifa, Wael K.M. Alhajyaseen, Sajeda A. Abounada, Mohannad H. Ahmed, Qatar Transportation and Traffic Safety Center, Qatar University, Doha, Qatar

ID 93           Managing Inventory Cost and Assuring Medicine Availability: a Case Study of a Pharmacy in Jeddah Saudi Arabia

Lama M. Mufti and Abdulaziz T. Almaktoom, Department of Operations and Information Management, Effat University, Jeddah, Kingdom of Saudi Arabia

ID 94           Factors Affecting Students’ Evaluations of Teaching at College Level

Abdelhakim Abdelhadi, Engineering Management Department, Prince Sultan University, Riyadh, Saudi Arabia

ID 95           The impact of Forecasting Techniques on Jeddah Paints Factory

Aseel H. Bashnaini, Marwan M. Lingga, and Abdulaziz T. Almaktoom, Department of Operations and Information Management, Effat University, Jeddah, Kingdom of Saudi Arabia

ID 96           Issues and Improvement Opportunities in Management System Internal Audit – A Survey

Edly F. Ramly, Certification Director, EFR Certification Sdn Bhd, Malaysia

ID 97           Case Study on Development of Process Failure Mode Effect Analysis (PFMEA) – Issues and Recommendations

Edly F. Ramly, Certification Director, EFR Certification Sdn Bhd, Malaysia

ID 98           Logistics Outsourcing: From the Contracts Complexity to the Performance of the Logistic Services

Jabir Arif, Equipe de recherche Modélisation et Optimisation des Systèmes Industriels et Logistique Ecole Nationale des Sciences Appliquées (ENSA) Université Abdelmalek Essaâdi Tetouan, Morocco

ID 99           Risk Assessment in the Logistics Outsourcing process: Decision-Making Tool

Jabir Arif, Equipe de recherche Modélisation et Optimisation des Systèmes Industriels et Logistique Ecole Nationale des Sciences Appliquées (ENSA) Université Abdelmalek Essaâdi Tetouan, Morocco

ID 100         A performance evaluation of genetic algorithm in case of multi-objective bin packing problem

Tatsuya KOMIYA and Yoichi SHIMAKAWA, Department of Computer Science and Technology, Salesian Polytechnic, Machida, Tokyo, Japan

ID 101         Open Innovation in Service Sector

Pimprabha Sirito and Maruf Hasan, School of Mechanical and Manufacturing Engineering, The University of New South Wales (UNSW), Sydney, Australia

ID 102         District Model with Multiple Types of Vehicles for Transporting Sugarcane

Rujirat Patcharamethanon and Kanchala Sudtachart, School of Manufacturing Engineering, Institute of Engineering, Suranaree Universuty of Technology, Nakhon Ratchasima, Thailand

ID 103         Investigation on the Effect of Types of Nanoparticles and Temperature on Nanoparticles-Foam Stability

Tan Bee Chea, Nur Asyraf Md Akhir and Ahmad Kamal Idris, Department of Petroleum Engineering, Universiti Teknologi PETRONAS, Seri Iskandar, Perak, Malaysia

ID 104         A Simple Algorithm to Validate Triangular Inequalities in Routing Problems

Eric Wibisono, Dept. of Industrial Engineering, Faculty of Engineering, University of Surabaya, Surabaya, Indonesia

ID 105         An Effective Genetic Algorithm for Capacitated Vehicle Routing Problem

Hadeer Awad, Raafat Elshaer, Adel AbdElmo’ez and Gamal Nawara, Industrial Engineering Department, Faculty of Engineering, Zagazig University, Zagazig, Egypt
Adel AbdElmo’ez, Industrial Engineering Department, College of Engineering,King Khaled University, KSA

ID 106         Resilience of Logistics Service Providers Facing a Port Strike: A Case Study

Helena Carvalho, Virgínia Helena Machado, Ana Barroso and Virgílio Cruz-Machado, UNIDEMI, Dep. de Engenharia Mecânica e Industrial, Faculdade de Ciências e Tecnologia, FCT, Universidade Nova de Lisboa, Caparica, Portugal

ID 107         Life cycle impacts for electricity generation from wind source

Md. Mizanur Rahman, Hasan Mohd Faizal, Aminuddin Saat and Mazlan Abdul Wahid, Department of Thermo Fluids, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia

ID 108         Safe human-machine centered design of an assembly station in a learning factory environment

Rafael Rojas, Erwin Rauch, Patrick Dallasega and Dominik T. Matt, Industrial Automation and Engineering (IEA), Faculty of Science and Technology, Free University of Bolzano, Bolzano, Italy

ID 109         Five Segment Model of Resource Circulation Considering Shortcut Transitions

Takaaki Kawanaka, Institute for Innovation in International Engineering Education, Graduate School of Engineering, The University of Tokyo
Hiroshi Yamashita, Department of Commerce, Meiji University, Kanda-Surugadai, Chiyoda-ku, Tokyo, Japan
Shoichi Kaneko, Faculty of Management Information, Yamanashi Gakuin University, Sakaori, Kofu city, Yamanashi, Japan

ID 110         Validity and Reliability Analysis of Safety Climate Factors at Small and Medium-sized Enterprises (SMEs) Wood Based Furniture

Alfian Destha Joanda and Bambang Suhardi, Faculty of Industrial Engineering, Sebelas Maret University (UNS), Jl. Ir Sutami No.36A Jebres, Surakarta, Indonesia

ID 111         Using discrete event simulation to evaluate the performance of lean manufacturing implementation: A case study of an electronic manufacturer company

Ahmad Nazif Noor Kamar and Cheng Jack Kie, Faculty of Industrial Management, Universiti Malaysia Pahang, Kuantan, Pahang, Malaysia

ID 112         Privatization and productive efficiency in an international Stackelberg mixed duopoly

Fernanda A. Ferreira and Flávio Ferreir, Polytechnic Institute of Porto, School of Hospitality and Tourism, Portugal

ID 114         Analysis of a Customer Relationship Management Tool in a Shipping Company

Teresa Pereira and Joana Foris, Institute of Engineering of Porto of Polytechnic Institute of Porto, ISEP/P.Porto, Research Center of Mechanical Engineering (CIDEM) Rua Dr. António Bernardino de Almeida, Porto, Portugal

ID 115         Empirical analysis of bankrupt companies using linear and nonlinear techniques in Japanese Stock Markets

Masanobu Matsumaru, Department of Industrial Engineering and Management of Faculty of Engineering, Kanagawa University, Kanagawa, Japan

ID 116         Performance Metric Development to Visualize Setup Losses in Wire Bond Process

Puvanasvaran A. Perumal, Yoong Sai Sieng and Tay Choo Chuan, Technical University of Malaysia Malacca, Durian Tunggal, Malacca, Malaysia

ID 117         Prediction Model of Tensile Strength Property in Friction Stir Welding Using Artificial Neural Network (ANNs)

Hwi Chie Ho, Armansyah, Gatot Suharjanto, Industrial Engineering, Faculty of Engineering, Bina Nusantara University, Jakarta, 11480, Indonesia

ID 118         Resource management using simulation at the airport

MA Nang Laik, Senior Lecturer, School of Business, Singapore University of Social Sciences, Singapore
Murphy Choy, Heriot-Watt University, Edinburgh Business School, Edinburgh, Scotland, United Kingdom

ID 119         Understanding Self-Responsibility in Employability Competencies Development as the Key for Engineering Graduates to survive in the labour market

Daudi Lazarus, Department of Electrical and Information Engineering, Pontianak State Polytechnic, Indonesia
Timothy Ferris, Cranfield University, UK

ID 120         Self-Responsibility in Employability Competencies Development: Perceptions from Australian Engineering Student and Alumni

Daudi Lazarus, Department of Electrical and Information Engineering, Pontianak State Polytechnic, Indonesia

ID 121         Redesigning Of Lamp Production Assembly Line

Bung Wai Kit and EzutahUdoncyOlugu, Facaulty of Engineering, Mechanical Engineering Department, UCSI University, Kuala Lumpur

ID 122         Simulation to Improve the Performance of a Real World Warehouse in India

AswinChandran, Deepak Hari, Gautham Krishnan and Joice Jacob, Department of, Mechanical Engineering, Sree Chitra Thirunal College of Engineering, Trivandrum, Kerala, India

ID 123         A Fuzzy Supplier Selection Model considering Social ‎Responsibility in Supply Chain

Abolfazl Aliakbari, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran
Mehdi Seifbarghy, Department of Industrial Engineering, Alzahra University, Tehran, Iran
Davar Pishva, Faculty of Asia Pacific Studies, Ritsumeikan Asia Pacific University, Beppu, Japan

ID 124         Reliability Centered Maintenance and Reliability Centered Spares for Maintenance and Spareparts Policies: Case Study Goss Universal Printing Machine in Printing Company

Judi Alhilman and F. Tatas Dwi Atmaji, School of Industrial and Systems Engineering, Telkom University, Bandung, West Java, Indonesia

ID 125         Design of multiattribute EWMA chart

Mohammad Shamsuzzamana and Salah Haridyb, Sustainable Engineering Asset Management (SEAM) Research Group, Department of Industrial Engineering and Engineering Management, University of Sharjah
Linda Zhang, IESEG School of Management (LEM-CNRS), Lille-Paris, France

ID 126         Single Vendor-Single Buyer Integrated Inventory Model for Deteriorating Items Considering Carbon Emission

Yosef Daryanto and Hui-Ming Wee, Department of Industrial & System Engineering, Chung Yuan Christian University, Chungli, Taiwan

ID 127         Vendor Development Program: An empirical validation of vendor performance through Business Excellence Framework.

Zarak Sh. Zamrah and Safian Sharif, Department of Mechanical Engineering, University of Technology Malaysia, Skudai, Johor, Malaysia

ID 128         Bullwhip Effect Measures in a Non-Stationary Seasonal Supply Chain

Narayan Kumar and Cherian Samuel, Department of Mechanical Engineering, IIT (BHU) Varanasi, India

ID 129         Selection of Best Professional Institute in India: The Student Perspective

Manish Kumar, Cherian Samuel, Vinaytosh Mishra, Anand Jaiswal, Department of Mechanical Engineering, IIT (BHU) Varanasi, India

ID 131         How the Reverse Channel Strategy is Affected by EPR Policies and Asymmetric Information

Yang Liu and Yang Zhang, Department of Industrial Engineering, Tsinghua University, Beijing, P.R. China

ID 132         A structured literature review of the Supply Chain practices in Food Processing Industry

Rahul S Mor, Arvind Bhardwaj, Sarbjit Singh, Department of Industrial and Production Engineering, National Institute of Technology, Jalandhar, India

ID 133         Sustainable City Logistics through Shared Resource Concepts

Patrick Dallasega, Thomas Stecher, Erwin Rauch and Dominik T. Matt Industrial Automation and Engineering (IEA), Faculty of Science and Technology, Free University of Bolzano, Bolzano, Italy

ID 136         Sustainability in Municipal Water Utilities Operations: Among Regions and Scales

Marga Gumelar, Faculty of Economics and Business, Universitas Padjadjaran, Bandung, Jawa Barat, Indonesia

ID 137         Supplier Selection of Technical Goods Using AHP Methods

Fatkhor Rozi and Evy Herowati, Industrial Engineering, Engineering Faculty, University of Surabaya, Surabaya, Indonesia

ID 138         A Framework for Evaluating the Performance of Supply Chain Risk in E-commerce

Abraham Stefanus and Markus Hartono, Industrial Engineering, Engineering Faculty, Universitas, Surabaya, Surabaya, Indonesia

ID 139         An Analytical Model on Time Series Data in Inland Prefecture of Japan

Shoichi Kaneko, Faculty of Management Information, Yamanashi Gakuin University, Kofu, Yamanashi, JAPAN
Takaaki Kawanaka, Institute for Innovation in International Engineering Education, The University of Tokyo, Tokyo, JAPAN
Nyunho Jung, Faculty of Business, Aichi Shukutoku University, Nagoya, JAPAN
Hiroshi Yamashita, Department of Commerce, Meiji University, Tokyo, JAPAN
Masanobu Matsumaru, Mechanical and Industrial Engineering Department, Kanagawa University, Kanagawa, JAPAN

ID 140         Development of Quality Management System in the Process Planning Maintenance Risk-Based in Government Building

Riany Aldesty and Yusuf Latief, Construction Management from Department of Civil Engineering, University of Indonesia

ID 141         Early Project-Management Performance and Project Outcomes Correlate

Hong Long Chen, Department of Business and Management, National University of Tainan, Tainan, Taiwan

ID 143         Detecting Amorphous And Its Effects during Education at Professional Training Department

Dr.K.M. Cyrus and Abbas Ahmadi, Industrial Engineering Faculty, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
Dr.R. Labbafi, Science and Research Branch, Islamic Azad University, Tehran, Iran

ID 144         Supply chain coordination with contracts under bilateral asymmetric information

Yang Liu and Yang Zhang Department of Industrial Engineering, Tsinghua University, Beijing, USA

ID 145         A model for Turnaround Maintenance Planning for a Network of Plants

Umar Al-Turki, Salih Duffuaa, and Mohamed Idris, Systems Engineering Department, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia

ID 146         Review of Maritime Inventory Routing Problems

Stefanus Soegiharto, Teuku Yuri M. Zagloel and Sunaryo, Department of Industrial Engineering, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia

ID 147         Evaluating Maintenance Policies and Implementation Strategies to improve Building Functional Performance in Government Building: a case study in Jakarta, Indonesia

Fahry Adam, Yusuf Latief, Department of Civil Engineering, Universitas Indonesia, Depok, Indonesia

ID 149         Effect of Culture on Consumer Switching: Moderating role of Involvement and Value of Services

Anjali Sharma and R.R.K. Sharma, Dept. of Industrial & Management Engineering, Indian Institute of Technology-Kanpur

ID 150         Development of Quality Management System in the Process Implementation Maintenance Risk-Based in Government Building

Khairina and Yusuf Latief , Department of Civil Engineering, Universitas Indonesia, Depok, West Java, Indonesia

ID 154         Modeling of Multimodal Transportation Problem Considering Carbon Emission

Thina Ardliana, Shipbuilding Institute of Polytechnic Surabaya, Doctoral Student at Industrial Engineering Department, Sepuluh Nopember Institute of Technology, Surabaya, Indonesia
I Nyoman Pujawan and Nurhadi Siswanto, Industrial Engineering Department, Sepuluh Nopember Institute of Technology, Surabaya, Indonesia

ID 155         Development of Building Information Modelling (BIM) Model to Enhance Services in Maintenance of Public Building

Ulfa Fatmasari and Yusuf Latief, Construction Management of Civil Engineering Department, University of Indonesia, Depok, Jawa Barat, Indonesia

ID 156         Scheduling security personnel for Multiple Security Gates

Abdulaziz S Alzahrani and Hesham K. Alfares, Systems Engineering Department, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia

ID 157         An Ant Colony Optimization Heuristic for Solving the Two-Dimensional Level Packing Problems

AzzaGaber, RaafatElshaer and MahassenKhater, Industrial Engineering Department, Faculty of Engineering, Zagazig University, Zagazig, Egypt

ID 159         Conceptual Frameworkto Develop E-Maintenance of Goverment Building Based on BIM

Anita Handayaniputri and Yusuf Latief, PhD Student Department of Civil Engineering Faculty of Engineering Universitas Indonesia, Jakarta Indonesia

ID 160         Impact of the truck wave region to the aerodynamics of saloon car

Dr. Dani Harmanto, Research for Advanced Design and Simulation, University of Derby, Derby, United Kingdom

ID 162         Ergonomics-based Kansei Engineering and Kano Model for public services excellence

Markus Hartono, Department of Industrial Engineering, University of Surabaya, Jalan Raya Kalirungkut, Tenggilis, Surabaya, Indonesia

ID 163         The Development of Risk-Based Standardized WBS (Work Breakdown Structure) for Cost Estimation of Concrete Precast Bridge Construction

Remi Fitriadi Kurnia and Yusuf Latief, Department of Civil Engineering, University of Indonesia, Depok, Indonesia

ID 164         Optimisation nozzle design for mixing fluid using Computational Fluid Dynamics

Thomas Chenery, BEng (Hons) Mechanical Engineering, University of Derby, Derby, United Kingdom
Dr. Dani Harmanto, Research for Advanced Design and Simulation, University of Derby, Derby, United Kingdom

ID 165         A Conceptual Framework for Combining Artificial Neural Networks with Computational Aeroacoustics for Design Development

Claire McKee, Dani Harmanto and Amanda Whitbrook, School of Engineering and Technology, University of Derby, Kedleston Road, Derby, UK

ID 166         Market Mavens in the E-World

R.R.K. Sharma and Vinayak Drave, Department of Industrial Management and Engineering, Indian Institute of Technology Kanpur, Kanpur, U.P., INDIA
Tushar Mangal, Department of Civil Engineering, Indian Institute of Technology Kanpur, Kanpur, U.P., INDIA

ID 167         Development Standardized WBS (Work Breakdown Structure) for Scheduling Planning Based on Risk in Steel Bridge Projects Construction

Salman Al Farizi and Yusuf Latif, Project Management from Department of Civil Engineering, Universitas Indonesia

ID 169         Development of Standard Operational Procedures for Maintenance and Supervision of Repair Works on Government Building at Risk Based

Prisca Anggia Putri, Magister Program Student Civil Engineering Universitas Indonesia, Jakarta, Indonesia
Yusuf Latief, Professor Civil Engineering Universitas Indonesia, Jakarta, Indonesia

ID 170         Effect on the hardness paving block by adding gomuti and pumice stone

Zainur Rochman, BEng (Hons) Civil Engineering, Universitas Narotama, Jalan Klampis Semalang, Surabaya, Indonesia
Dr. H. Sri Wiwoho Mudjanarko ST., MT, Pro-Vice Chancellor, Universitas Narotama, Jalan Klampis Semalang, Surabaya, Indonesia
Dr. Dani Harmanto, Research for Advanced Design and Simulation, University of Derby, Derby, United Kingdom

ID 171         Artificial Bee Colony Algorithm for Solving Shelf Space Allocation Model

Mohamed Grida, Raghda Roshdy, and Gamal Nawara, Department of Industrial Engineering, Zagazig University

ID 172         Identifying factors that facilitates functioning of Virtual Teams in Supply Chain with Differing Strategy Orientation.

R.R.K. Sharma and Vinayak Drave, Sanjay Mittal Chair Professor (HAG Scale), Department of Industrial Management and Engineering, Indian Institute of Technology Kanpur, Kanpur, U.P., INDIA
Ateequr Rahman, Office of the Dean of Academic Affairs, Indian Institute of Technology, Kanpur, India

ID 173         The Well-Being Situation Of Existing Working Of Selected Rice Mills Situated In Sylhet City, Bangladesh

Iqbal and A.B.M Abdul Malek, Department of Industrial and Production Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh

ID 174         Impact of Order Picking Regions on the Performance of Routing Picking Policies

Hala Ahmed, Raafat Elshaer, and Mahassen Khater, Industrial Engineering Department, Faculty of Engineering, Zagazig University, Zagazig, Egypt

ID 177         Application of Hidden Markov Model in Crude Oil Price Forecasting

Abdul Talib Bon and Nuhu Isah, Faculty of Technology Management, Business and Entrepreneurship University Tun Hussein Onn Malaysia, Parit Raja, Batu Pahat, Johor, Malaysia

ID 179         Maintenance System of Universal Goss Printing Machine based on failure data using RCM and RCS method

Fransiskus Tatas Dwi Atmaji, Telkom University, Indonesia
Judi Alhilman, ITTELKOM, Indonesia

ID 180         A Framework of Wireless Maintenance System Monitoring Based Cloud Technology

Fransiskus Tatas Dwi Atmaji, Telkom University, Indonesia
Judi Alhilman, ITTELKOM, Indonesia

ID 182         Management of Toxic and Hazardous Chemicals from Electronic Devices Using Supply Chain Concept

Shahrin Iqbal, Department of Electrical and Electronic Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
Salma Akhter, Department of Chemical Engineering and Polymer Science, Shahjalal University of Science and Technology, Sylhet, Bangladesh

ID 183         A Model for Optimizing Remanufacturing Quality Strategy by Considering Quality Loss Function

Imron Mustajib, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember Surabaya, University of Trunojoyo Madura, Bangkalan, Indonesia
Nani Kurniati and Udisubakti Ciptomulyono, Department Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

ID 184         The Role of Organization’s Continuous Commitment in Mediating Relationship between Strategic Evaluation and Organizational Performance in Libya’s Industrial Sector’

Abdul Talib Bon and Ahmed Alghazali Mohammed Alghannai, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor Malaysia

ID 186         Stakeholders Analysis of Performance Improvement Project on Integrated Development Public Space Child Friendly (RPTRA) In Jakarta Timur

E. R. Gloria Febriani, Civil Engineering

ID 187         Standard Operational Procedure to an Effective Reserve Goods Procurement Based on Risk: the Government Building’s Project

Sindi Ajeng Hadiyanti and Yusuf Latief, Department of Civil Engineering, University of Indonesia, Depok, Indonesia

ID 188         Development of Risk-Based Standardized WBS (Work Breakdown Structure) for Safety Planning of Cable Stayed Bridge Project

Gilang Satrio and Prof. Dr. Ir. Yusuf Latief, MT., Department of Civil Engineering , University of Indonesia, Depok, Jawa Barat, Indonesia

ID 189         Integration Process Models of Quality, Safety, Health and Environment Management Systems to Achieve Sustainability Construction

Muhammad Rofi’udin, Magister Program Student Civil Departement Faculty of Engineering University of Indonesia, Jakarta, Indonesia.
Yusuf Latief, Professor Civil Department Faculty of Engineering University of Indonesia, Jakarta, Indonesia

ID 190         Development of Standard Operational Procedure (SOP) of Risk-Based Fire Emergency Response on Government Building

Nurma Rahmani and Yusuf Latief, Construction Management of Civil Engineering, University of Indonesia, Depok, Indonesia

ID 192    Impact of climate on water stress in the vegetative development of the cultivated table vine of Vitis vinifera ssp sativa in Algeria

Kaddour  EL HEIT, Professor, Laboratory of Natural Resources: Viticulture / Arboriculture. Faculty of Biological  Sciences and Agronomic Sciences. University Mouloud Mammeri.TiziOuzou., Algeria
Abderrahmane  MELLAK, Professor, Laboratoire : LGPH .F,H,C. University Mohamed Bougara ,Boumerdes, Algeria
Abderazak  HAMAMA, PhD, Assistant Research , Laboratories of Natural Resources: Viticulture / Arboriculture , Faculty of  Biological  Sciences and Agronomic Sciences. University Mouloud Mammeri.TiziOuzou., Algeria
Session Chair: Abderrahmane Mellak, University of Boumerdes, Algeria

ID 205         Additive and Digital Manufacturing: Implications for Organizational Strategy and Structure

Somen Dey and R.R.K. Sharma, Department of Industrial and Management Engineering, Indian Institute of Technology Kanpur, Kanpur, India

ID 206         Exploring the Synergistic Nature of Combinations of Various Functional Flexibility of Manufacturing Organizations

Somen Dey and R.R.K. Sharma, Department of Industrial and Management Engineering, Indian Institute of Technology Kanpur, Kanpur, India

ID 207         Analysis of the Operations Management Strategy of a Telecommunication Company in Malaysia

Habibah Norehan Haron, Universiti Teknologi Malaysia

ID 208         Characterization And Modeling of Rheological Behavior of a System of Mud a Reverse Emulsion

Mellak Abderrahmane, Boumerdes University, Algeria
Kaddour El Heit, Université Mouloud MAMMERI, Algeria
Khaled Benyounes, University M’Hamed Bougara of Boumerdes, Algeria

ID 209         Studies of the Loss of Circulation during Drilling Oil Wells

Abderrahmane MELLAK and K. BENYOUNES, Hydrocarbons and Chemicals Faculty – Laboratory of Hydrocarbon Engineering, University of Boumerdes, Algeria.
EL HEIT University Mouloud Mammeri, Tizi Ouzou, Algeria

ID 210         Simulation Model of Risk Based Contingency Costs Estimated In Industrial Building Projects with Design Build Contract

Filbert Reginald, Civil Engineering, Project Management

ID 214         Engineering Accreditation: Assessing and Documenting Students Competencies in their Respected Disciplines

Albertus Retnanto, Petroleum Engineering, Texas A&M University at Qatar, Doha, Qatar
Hamid R. Parsaei, Mechanical Engineering, Texas A&M University at Qatar, Doha, Qatar
Boback Parsaei, Civil and Environmental Engineering, Texas A&M University, College Station, Texas USA

ID 215         Business Strategy with Exploratory & Exploitative Innovation: The Analytics Role from SMAC Technology

Pratima Verma and R.R.K. Sharma, Department of Industrial & Management Engineering, Indian Institute of Technology Kanpur, Kanpur, India
Vimal Kumar, Department of Management Studies, National Institute of Technology Bhopal, India

ID 217         A Framework Towards Successful Business Incubator for Indonesian Public Universities: A Pilot Review

Lina Gozali, Maslin Masrom and Habibah @ Norehan Haron, Razak School of Engineering and Advanced Technology, Universiti Teknologi Malaysia, Jalan SultanYahya Petra, Kuala Lumpur, Malaysia
Eduard Tjahjadi, Department of Industrial Engineering, Faculty of Engineering, Universitas Tarumanagara,, Jl. S Parman No 1, Jakarta, Indonesia
Teuku Yuri M Zagloel, Department of Industrial Engineering, Faculty of Engineering, University of Indonesia,, Kampus UI, Depok,West Java

ID 218         Reduce Turnaround Time through Waste Elimination

Bernardo Villarreal, Fernando Gonzalez Aleu, Arturo Quezada, Gabriela Morales & Aracely Carranza, Universidad de Monterrey, San Pedro Garza García, N.L., México
Jose Arturo Garza Reyes, Derby Business School, The University of Derby, Derby, UK

ID 219         Agent-Based Conceptual Model of Coordination   Collaborative Production Planning In Divergent Two-Tier Supply Chain

Azizah Aisyati, Andi Cakravastia, Anas Ma’ruf and TMA Ari Samadhi, Department of Industrial Engineering and Management, Bandung Institute of Technology, Bandung, INDONESIA

ID 221         A Mathematical Model for Outbound Truck Scheduling with Multiple Trips in Multi-Door Cross Docking System

Nattapong Kamsura and Warisa Wisittipanich, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai, Thailand

ID 231         Analytical Hierarchy Process (AHP) Application of Selecting Corn Waste Production

Tjutju Tarliah and Dedeh Kurniasih, Departement of Industrial Engineering, Universitas Pasundan, Indonesia

ID 232         Impact of capacity loss factors in front-of-line IC packaging on production performance: a case study

Lee Hsuen Yen, School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus, Nibong Tebal, Pulau Pinang, Malaysia
Shahrul Kamaruddin and Zulhilmi Paiz Ismadi, Mechanical Engineering Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, Perak, Malaysia
Joshua Prakash, Faculty of Engineering and Green Technology, Universiti Tunku Abdul Rahman, Perak Campus, Jalan Universiti, Bandar Barat, Kampar, Perak
Nik Mizamzul Mehat, Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP)
Aras 1, Blok S2, Kampus UniCITI Alam, Sungai Chuchuh, Padang Besar, Perlis, Malaysia

ID 233         Prediction of Relative Permeability from Experimental Resistivity Index and Capillary Pressure Data

Saber Elmabrouk and Walid Mohamed Mahmud, Department of Petroleum Engineering, University of Tripoli, Tripoli-

ID 234         The Influences of Salary Level, Employee Satisfaction, and Organizational Commitment on Turnover Intention

Luhur Prayogo and Zulfa Fitri Ikatrinasari, Industrial Engineering Department, Mercu Buana University, Jakarta, Indonesia

ID 235         Incorporating repeat purchasing in Innovation Diffusion Model Using Stochastic Differential

Kuldeep Chaudhary, Kalyani Kumar and Sunita Mehta, Department of Applied Mathematics, Amity Institute of Applied Sciences, Amity University, Noida, India

ID 242         STRATEGIES FOR CORE ESTABLISHMENT IN IRANIAN BANKING INDUSTRIES

M. Cyrus (PhD.) and Nader. Nematpour (MSc.), Department of Industrial Engineering and Management Systems, Amirkabir University of Technology (Tehran Polytechnic), Iran
Jafari (MSc.), Department of Industrial Engineering and Management Systems, University of Science & Technology, Tehran, Iran

ID 251         The Effects of Steam Commingled Injection in Heavy Oil Production from FNE and Bamboo Sudanese Fields (Steam Adsorption and Distribution Challenges)

Husham A. Elbaloula, Sudan University of Science and Technology, Petro-Energy-E&P, PDOC & PE Tower, Khartoum, Sudan
Dr. Tagwa A. Musa, College of Petroleum Engineering & Technology, Sudan University of Science and Technology, Khartoum, Sudan

ID 252         An Interplay between Employee Psychological Capital, Organizational Fit, and Work Well-Being on Organizational Commitment: An Empirical Study on E-Commerce Industry in Indonesia

Rizal Nangoy and Mohammad Hamsal, Doctor of Research in Management, Binus University, Jakarta, Indonesia

ID 253         Creating Innovative Work Behavior:  The Roles of Self Efficacy, Leader Competency, and Friendly Workplace

Henny Santoso and Asnan Furinto, Doctor of Research in Management, Binus University, Jakarta, Indonesia

ID 262         Milk agro- alimentary chain sustainable development strategy in the conditions of the Ecuadorian Amazon region

Neyfe Sablón Cossío, Career Industrial Engineering, North Technical University, Ibarra, Ecuador
Magdalena Beatriz Cárdenas Uribe, Manuel Lázaro Pérez Quintana, Luis Bravo Sánchez and Nelly Manjarrez Fuentes, Career Agro industrial Engineering, Amazon State University, Puyo, Ecuador

ID 263         STRATEGIC BUSINESS TRANSFORMATION THROUGH LEAN SIX SIGMA

Noor Azam Md Saad, Astuty Amrin PhD and Khairur Rijal Jamaludin PhD, Razak School of Engineering and Advanced Technology, Universiti Teknologi Malaysia, Jalan Yahya Petra, Kuala Lumpur, Malaysia

ID 264         Development of Standardized WBS (Work Breakdown Structure) Based on Risk for Cost Control of Steel Bridge Construction Project

Ardiyanto Nugroho and Yusuf Latief, Construction Management from Department of Civil Engineering, Universitas Indonesia, Depok, Indonesia

ID 274         Working with Millennial Generation:  How to Manage Team Engagement to Achieve Excellent Service (Case Study: Tanah Abang Main Branch, Private Bank ABC)

Agung Terminanto, Jurusan Teknik Industri, Fakultas Teknik, Universitas Pancasila, Jakarta, Indonesia
Ahmad Badawi and Shinta Winasis, Program Doctoral Managemen SDM, Fakultas Pascasarjana Universitas Mercubuana, Universitas Mercubuana, Jakarta, Indonesia

ID 275         Lean Assessment in a Cross-Docking Distribution Center

Ammar Mohamed Aamer, Faculty of Engineering and Technology, Sampoerna University, Jakarta, Indonesia

ID 285         Contribution to the integrated evaluation of business management

Hidelvys Cantero Cora, Elisa Leyva Cardeñosa and Daideé Caridad Ibarra Miranda, Universidad de Holguín, Cuba

ID 292         Comparing the Business Process in Creative Industry at Bandung

Iston Dwija Utama and Chyintia Ika Ratnapuri, Creativepreneur Department, Bina Nusantara Bandung, School of Creative and Technology, Bandung, West Java, Indonesia

ID 293         Other Income from Building a Franchise System: Insight from the Franchisor

Dede Suleman, Ahmad Hidayat Sutawidjaya and Indra Kurniadi, Program Doctoral, Pascasarjana Universitas Mercubuana, Universitas Mercubuana, Jakarta, Indonesia

ID 294         On the Locations of Electric Vehicle Charging Facilities using a Geographic Information System

Yohei Kakimoto and Hirotaka Takahashi, Department of Information & Management Systems Engineering, Nagaoka University of Technology, Niigata, Japan
Yoichi Shimakawa, Department of Computer Science & Technology, Salesian Polytechnic, Tokyo, Japan
Hiroyuki Goto, Department of Industrial & System Engineering, Hosei University, Tokyo, Japan

ID 295         The effect of Third Parties Fund, Non-Performing Loan, Capital Adequacy Ratio, Loan to Deposit Ratio, Return On Assets, Net Interest Margin and Operating Expenses Operating Income on Lending (Study in Regional Development Banks in Indonesia)

Sugeng Riadi, Program Doktor Manajemen, Pascasarjana Universitas Mercubuana, Universitas Mercubuana, Jakarta, Indonesia

ID 301         Conceptual Development of Land Value Capture (LVC) Model in Indonesia Infrastructure Project to Increase Project Benefits

Gunawan and Mohammed Ali Berawi, Department of Civil Engineering, Faculty of Engineering, University of Indonesia, Depok, Indonesia

ID 302         Scaling up Model for Developing Second-Generation (2G) Bioethanol by using Palm Empty Fruit Bunches Feedstock

Sawarni Hasibuan, Industrial Engineering Department, Universitas Mercu Buana, Jakarta, Indonesia
Hermawan Thaheer, Computer Science Department, Universitas Pakuan, Bogor, Indonesia
Rosalendro Eddy Nugroho, Master of Management, Universitas Mercu Buana, Jakarta, Indonesia

ID 304         On Quantitative Analysis of the Positive and Negative Feelings in the Menu Selection Behavior of the Consumers

Sunhee Kwon, Graduate School of Information and Communication, Meiji University, Tokyo, Japan
Takaaki Kawanaka, Institute for Innovation in International Engineering Education, Graduate School of Engineering, The University of Tokyo, Hongo, Bunkyo-ku, Tokyo, Japan
Hiroshi Yamashita, Department of Commerce, Meiji University, Kanda-Surugadai, Chiyoda-ku, Tokyo, Japan

ID 305         Applicability of ARIMA models for investigating the effects of Technology spillover on Car Manufacturing Companies’ performance

Mohammadhossein Khorshidnam, Arya Karami and Kaveh Mohammad Cyrus, Industrial Engineering Department, Amirkabir University of Technology, Tehran, Iran

ID 306         Green Manufacturing Adoption on SME: A review of theories

Ira Setyaningsih and Nurul Indarti, Industrial Engineering Department, Islamic State University Sunan Kalijaga, Yogyakarta, Indonesia
Nurul Indarti, Faculty of Economics and Business,Gadjah Mada University, Yogyakarta

ID 307         Consumer Switching Behavior in E-Services: Organizational and Technological antecedents through relational paradigm

Anjali Sharma and R.R.K. Sharma, Dept. of Industrial & Management Eng., Indian Institute of Technology-Kanpur, U.P., India

ID 308         Strategy for Capability Development of Knitting Small Medium Enterprises Using SWOT Analysis

Endang Chumaidiyah, Rio Aurachman and Boby Sahera Industrial Engineering Department of Industrial and System Engineering Faculty, Telkom University, Indonesia

ID 310         Productivity Improvement with Short-Term Quantitative Forecasting Method Case Study on ABC Store – Tokopedia and Bukalapak

R Bagus Yosan , Lecturer of Industrial Engineering Faculty, Universitas Mercu Buana, Meruya Selatan, DKI Jakarta, Indonesia
Muhammad Kholil, Dean of Industrial Engineering Faculty, Universitas Mercu Buana, Meruya Selatan, DKI Jakarta, Indonesia

ID 311         Integrated Scheduling and Transportation System Incorporating Energy Consumption: Models Development In the Case of Perishable Goods

Luki Trihardani and Oki Anita Candra Dewi, Logistics Engineering Department, Universitas Internasional Semen Indonesia, Gresik, East Java, Indonesia

ID 313         Overall Equipment Effectiveness (OEE) at the Laboratory of Structure Testing

Rahmat Nurcahyo, Faisal, Muhammad Dachyar and Muhammad Habiburrahman, Department of Industrial Engineering, Faculty of Engineering, University of Indonesia, New Campus UI, Depok, Indonesia

ID 314         The Effect of Service Quality on Student’s Satisfaction At Technical Education And Vocational Training

Rahmat Nurcahyo, Fauzia Rizkiana Aji, Djoko Sihono Gabriel and Muhammad Habiburrahman, Department of Industrial Engineering, Faculty of Engineering, University of Indonesia, New Campus UI, Depok, Indonesia

ID 315         Criteria Affecting the Selection of Logistics Service Provider for Retail Small and Medium Enterprise in Thailand

Chawanluck Suriyajaroen, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, Thailand
Apichat Sopadang, Excellence Center in Logistics and Supply Chain Management, Chiang Mai University, Chiang Mai, Thailand

ID 316         The Implementation of Material Flow Cost Accounting Analysis to Determine the Optimal Sample Size and Lot Size in Serial Multi-stage Processes

Suteerat Supakulwattana and Wichai Chattinnawat, Department of Industrial Engineering, Chiang Mai University, Chiang Mai, Thailand

ID 320         Implications of Human Resource Management against Organizational Culture, Work Motivation, Job Satisfaction and Employee Performance at State Own Enterprise Hospitals in Indonesia (Empirical Study on the 5 Biggest Pertamina Hospitals in Indonesia)

Uli Wildan Nuryanto and Asep Saefudin Doctoral Student, Postgraduate Program University, Mercubuana, Jakarta, Indonesia

ID 321         Modeling for Sustainable Supply Chain Management Level and its Impact on Company’s Performance

Jerry Loardi Loa and Eric Wibisono,Dept. of Industrial Engineering, Faculty of Engineering, University of Surabaya, Surabaya, Indonesia

ID 322         The dynamic of rice production in Kalimantan Selatan: A policies study

Arief RM Akbar, Alan Dwi Wibowo and  Alia Rahmi Agro-industrial Technology Department, Faculty of Agriculture, Universitas Lambung Mangkurat, Jl A Yani KM 36, Banjarbaru, Kalimantan Selatan, Indonesia.
Sigit Prabawa, Food Science and Technology Department,Faculty of Agriculture, Universitas Sebelas Maret, Jl Ir. Sutami No 36A, Surakarta, Indonesia

ID 325         Improvement optimization for DMAIC methodology: A Case study

Gamal Mohamed Nowara, Mohammad Abdel Halim Mansour and Islam sharafeldin, Industrial Engineering Department, Zagazig University, Cairo, Egypt

ID 326         PERT-Type System Application on Food Industry to Reduce CIP Cycle Time

Rianita Puspa Sari and Razan Nayif Hasanain, and Ade Momon Subagyo, Department of Industrial Engineering, State University of Singaperbangsa Karawang , Karawang, Jawa Barat, Indonesia

ID 327         Performance management using Influence Diagrams: The case of improving procurement

Mohammad Hassan Abolbashari, Omar Khadeer Hussain and Elizabeth Chang, School of Business, University of New South Wales, Canberra, BC , Australia

ID 328         Aircraft Taxiing Strategy

Izuddin Md Ithnan and Istas F. Nusyirwan, Department of Aeronautics, Automotive & Ocean Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia
Jafri Mohd Rohani and Floridah Jelon, Department of Materials, Manufacturing & Industrial Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia
Nordiana Mashros, Department of Geotechnics & Transportation, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia

ID 329         Incubation framework for a new startup: A case study in Thailand

Phattaramon Klaasa, Technopreneurship and Innovation Management Program, Chulalongkorn University, Bangkok, Thailand.
Natcha Thawesaengskulthai, Department of Industrial Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok, Thailand

ID 330         Selection of Product Design Prominent Factors Using Analytic Hierarchy Process for Developing Countries

Farhad Ahmed and Dr. A.R.M. Harunur Rashid, Department of Mechanical and Chemical Engineering, Islamic University of Technology, Gazipur, Bangladesh

ID 331         Management of the Ground Engaging Tools through Using Classification and Forecast

Ilyas Masudin and Gilang Yandeza, Department of Industrial Engineering, Universitas Muhammadiyah Malang, Jalan Raya Tlogomas, Malang, Jawa Timur

ID 332         Educational Program Planning Using Project Management Techniques

Kingsley Gnanendran, OIM Department, The University of Scranton, Scranton, PA, USA
Manohar Madan, ITSCM Department, University of Wisconsin-Whitewater, Whitewater, WI, USA

ID 333         Distribution Network Design for an Oil Blending Company

Sayed M. Irfan, Ex-Faculty, Department of Industrial & Manufacturing Engineering, NED University of Engineering & Technology, Karachi, Pakistan
Sharfuddin Ahmed Khan, Industrial Engineering and Engineering Management Department, University of Sharjah, Sharjah, United Arab Emirates
Nadjib Brahimi, Department of Supply Chain Management, Rennes School of Business, Rennes, France

ID 334         A Critical Evaluation of Climate-Related Risks Associated with Oil and Gas Industry in Libya

Taher Elmhidwi, Productions Chemistry Labs, Mellitah Oil & Gas B.V, Libyan Branch, Tripoli, Libya
Saber Elmabrouk, Department of Petroleum Engineering, Faculty of Engineering, University of Tripoli, Tripoli, Libya
Tawfik Elmhedwi, Department of Engineering Management, School of Applied Science and Engineering, The Libyan Academy, Tripoli, Libya

ID 335         Portable Inflated Solar Power Cold Storage House Technology as a supporting facility to increase the production and marketing of fishery fishermen

Ikhsan Setiawan, Civil Engineering Department, Universitas Narotama, Surabaya, Indonesia
Reswanda T. Ade, School of Management, Universitas Narotama, Surabaya, Indonesia
Dr. Dani Harmanto, Research for Advanced Design and Simulation, University of Derby, Derby, United Kingdom

ID 336         Gender Leadership And Inequality Study on Higher Education in Indonesia

Iswachyu Dhaniarti, M.H., Vice Chancellor/Rector, Universitas Narotama, Jl. Arief Rachman Hakim 51, Surabaya, Indonesia
Dr. Dani Harmanto, Research for Advanced Design and Simulation, University of Derby, Derby, United Kingdom

ID 337         Model of Mix-Used Central Feasibility Investment Model Support for Increasing Local Government Revenue

Dr. Joko Suyono and Agus Sukoco., Faculty of Economy, Universitas Narotama, Jl. Arief Rachman Hakim 51, Surabaya, Indonesia

ID 338         Safety Culture Assessment in the Air Traffic Control Sector

Mansour A. Elkhweldi, General Manager, United Aviation Company, Mitiga International Airport, Tripoli, Libya
Saber Kh. Elmabrouk, Faculty of Engineering, University of Tripoli, Libya

ID 340         Integration Model of Maritime and Tourism in the Regional Areas to Enhancing Economy in the East Indonesia

Nyoman Sudapet and Agus Sukoco, Faculty of Economy, Universitas Narotama, Jl. Arief Rachman Hakim 51, Surabaya, Indonesia
Dr. Dani Harmanto, Research for Advanced Design and Simulation, University of Derby, Derby, United Kingdom

ID 341         Calibration system for costs reduction: Case study in the maquiladora industry.

Karina C. Arredondo-Soto, Maria del Socorro Cruz-Castillo, Teresa Carrillo-Gutierrez, Marcela Solis-Quinteros and Luis A. Avila-Lopez, Universidad Autónoma de Baja California, Calzada Universidad, Parque Industrial Internacional, Tijuana, B.C., C.P., Mexico

ID 342         Framework of improving the quality and lower the cost build for the real estate industry in Indonesia

Dr. Dani Harmanto, Research for Advanced Design and Simulation, University of Derby, Derby,United Kingdom
Agus Sukoco , Faculty of Economy, Universitas Narotama, Jl. Arief Rachman Hakim 51, Surabaya, Indonesia
M.Ikhsan Setiawan, Civil Engineering Department, Universitas Narotama, Surabaya, Indonesia
Dr. H. Sri Wiwoho Mudjanarko ST., MT., Pro-Vice Chancellor, Universitas Narotama, Jl. Arief Rachman Hakim 51, Surabaya, Indonesia

ID 343      Increasing the productivity of health facilities in urban areas in México

Adrián Aguado, Sandra Garza, Jenny Díaz-Ramírez and Johana González, Department of Industrial Engineering, Universidad de Monterrey, San Pedro Garza García, N.L, MX

ID 344         A Model for Tuna-Fishery Policy Analysis: Combining System Dynamics and Game Theory Approach

E.Widodo, Budianto, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, ITS, Surabaya, Indonesia

ID 345         Inbound Logistics in Sub-Saharan Africa: A Case Study on Current Practices and Challenges

Theint Moe Hnin and Shao Hung Goh, School of Business, Singapore University of Social Sciences, Singapore

ID 346         Sustainable Warehousing: A Case Study on Practices, Outcomes and Barriers in the Asia Pacific

Shao Hung Goh, School of Business, Singapore University of Social Sciences, Singapore

ID 347         Implementation and Configurations Open Source ERP in e-Commerce Module using ASAP (A Case Study on SME)

Agung Terminanto, Faculty of Computer Science, Universitas Indonesia, Depok, Indonesia

ID 363         Sensitivity Analysis of the Gas Compressibility Factor

Walid Mahmud and Saber Elmabrouk, University of Tripoli, Libya
Hassan Sbiga, Libyan Petroleum Institute, Libya

ID 364         Risk Analysis Related to Costing and Scheduling of Construction Projects

Mohamed A. Aderbag, Project Manager, Organization for Development of Administrative Centers (ODAC), Tripoli, Libya
Saber Kh. Elmabrouk, Faculty of Engineering, University of Tripoli, Libya

ID 365         An Optimal Integrated Maintenance Policy for a Pro-rata Warranty Model

Hajej Zied and Rezg Nidhal, Laboratory of Industrial Engineering of production and maintenance, Lorraine University, Metz, FRANCE

ID 366         Risk Assessment at Heritage Sites: A Case Study of Tripoli Old City, Libya

Fatma Elaradi, Engineering Management Department, University of Tripoli, Tripoli, Libya
Saber Kh. Elmabrouk, Faculty of Engineering, University of Tripoli, Tripoli, Libya

ID 367         Calculation of EUR form Oil and Water Production Data

Saber Kh. Elmabrouk, Faculty of Engineering, University of Tripoli, Tripoli, Libya
Walid Mohamed Mahmud, Petroleum Engineering Department, Tripoli University, Tripoli-Libya
Hassan M. Sbiga, Libyan Petroleum Institute (L.P.I) , Tripoli-Libya

ID 370         Integrated Management Framework for Carbon capture and storage (CCS)

Nooshin jabbari, lecturer at PUT(Petroleum University of Technology), and Renewable energy manager in city bank of Iran
Amirreza Behravankia, Faculty of Engineering, Islamic Azad University of Mashhad (Fersdos Branch)

ID 398         Risk Assessment of EPS in Building and Construction Projects: A New Technology in the Libyan Market

Abdelwahed H. Elalem, Engineering Project Management, School of Engineering and Applied Science, The Libyan Academy, Tripoli-Libya
Saber Kh. Elmabrouk, Faculty of Engineering, University of Tripoli, Tripoli, Libya

ID 399         FinTech as Innovative Technology in Banking Services Process

Fernanda A. Ferreira and Flávio Ferreira, Polytechnic Institute of Porto, School of Hospitality and Tourism, CITH/P.Porto, Applied Management Research Unit (UNIAG), Rua D. Sancho I, Vila do Conde, Portugal

ID 400         Statistical Basketball Player Analysis

Anna Wu, Big Data Science STEM Program (Morrill Learning Center), San Jose, CA, USA
Mason Chen, Six Sigma Black Belt, Stanford Online High School, CA, USA

ID 401         Some obstacles that affect the TQM implementation in Bangladeshi RMG Sector: An empirical study

Subrata Talapatra, Industrial Engineering and Management Department, Khulna University of Engineering & Technology, Khulna, Bangladesh
Md. Kutub Uddin, Mechanical Engineering Department, Khulna University of Engineering & Technology, Khulna, Bangladesh

ID 402         Modeling and Simulation of Queuing Systems Using Stochastic Petri net and Arena Software: A Case Study

Husam Kaid and Abdulmajeed Dabwan, College of Engineering, Industrial Engineering Department, King Saud University, Riyadh, Saudi Arabia
Abdulrahman Al-Ahmari1. FARCAMT Chair, Advanced Manufacturing Institute, King Saud University, Riyadh, Saudi Arabia

ID 403         Environmental Sustainability and Waste Management Practice in Nigeria: Reconnoitering Local Training and Beneficiations

Okafor Jude Aniemeka and Prof. Charles Mbohwa, Department of Operations Management, University of Johannesburg, South Africa
Dr. Walter Musakwa, Department of Town and Regional Planning, University of Johannesburg, South Africa
Dr. Precious Toby Nwachukwu

ID 404         Exploring, Monitoring of Ecological Conservation Practice for Awareness and Sustainability in Aba, Nigeria

Okafor Jude Aniemeka and Prof. Charles Mbohwa, Department of Operations Management, University of Johannesburg, South Africa
Dr. Walter Musakwa, Department of Town and Regional Planning, University of Johannesburg, South Africa
Dr. Precious Toby Nwachukwu

ID 405         Cogitating Sustainability on Ethical Code Enactment: Comparing Social Work Administrators’ Habitus and Gender Parity Outcomes

Okafor Jude Aniemeka and Prof. Charles Mbohwa, Department of Operations Management, University of Johannesburg, South Africa
Dr. Walter Musakwa, Department of Town and Regional Planning, University of Johannesburg, South Africa
Dr. Precious Toby Nwachukwu

ID 406          Inventory-Transportation Model Considering Carbon Cap

Thina Ardliana, Shipbuilding Institute of Polytechnic Surabaya, Doctoral Student at Industrial Engineering Department, Sepuluh Nopember Institute of Technology, Surabaya, Indonesia
I Nyoman Pujawan and Nurhadi Siswanto, Industrial Engineering Department, Sepuluh Nopember Institute of Technology, Surabaya, Indonesia

ID 407         Evaluating the impact of Quality Assurance and Control on the Performance of South African Food Manufacturing Industry

Pule Aaron Kholopane and Ndala Yves Mulongo: Department of Quality and Operations Management, Faculty of Engineering and the Built Environment, University of Johannesburg, Auckland Park 2006, South Africa

ID 408         Assessing the performance of the South African automobile manufacturing companies by means of quality management practices

Pule Kholopane and Ndala Yves Mulongo, Faculty of Engineering and the Built Environment, University of Johannesbur, Auckland Park, South Africa

ID 409         Causes of food crisis in the Southern African Development Community

Ndala yves Mulongo and Pule Aaron Kholopane, Faculty of Engineering and the Built Environment, University of Johannesburg,Auckland Park, South Africa

ID 410         The Analysis of Manufacturing System Utilization by Using Queuing and Taylor Theories

Muhammad Marsudi, Department of Industrial Engineering, Faculty of Engineering, Universitas, Islam Kalimantan Muhammad Arsyad Al-Banjari, Banjarmasin, Indonesia

ID 411         Analysis of Accident in Construction Projects

Toriq Arif Ghuzdewan and Petrus Reza Renanda Damanik, Civil and Environmental Engineering Department, Gadjah Mada University,Yogyakarta, Indonesia

ID 412         Sustainable Performance Measurement Using Sustainable Value Stream Mapping: A Case Study on One of Palm Oil Companies in Indonesia

Elisa Kusrini and Rangga Primadasa, Magister of Industrial Engineering and Industrial Engineering Department, Indonesian Islamic University

ID 413         The Cars’ Brand Country of Origins Impact to Brand Personality Based on Consumer’s Involvement Level: Experimental Investigation Evidence for Country of Manufacturing Effect

Rudy Aryanto, Creativepreneurship Department, Binus Bandung, School of Creative Technology, Bandung, Indonesia
Keshia Komala, Management Department, Binus University, Jakarta, Indonesia
Yuwana Mardjuka, Tourism Destination Management Department, Bandung School of Tourism, Bandung, Indonesia

ID 414         Growth Analysis of Indonesia Crude Palm Oil Industry on Manufacturing Industry and Macroeconomic Period 1997 – 2015

Rosalendro Eddy Nugroho, Magister Manajemen Universitas Mercu Buana Jakarta.
Sawarni Hasibuan, Magister Teknik Industri Universitas Mercu Buana Jakarta.

ID 415         Influence of Critical Plasma Spray Parameter on Characteristics of Nanostructured Yttria Stabilized Zirconia Coatings

Venkateshwarlu Bolleddu, Department of Manufacturing, School of Mechanical Engineering, VIT University, Vellore, India

ID 416         Measuring the effectiveness of Total Productive Maintenance in the South African food manufacturing industry

Ndala Yves Mulongo and Pule Aaron Kholopane, Faculty of Enhineering and the Built Environment, University of Johannesburg, Auckland Park,South Africa

ID 418         Optimization using Decisions Analysis and Linear Programming at PT GMS

Bachtiar H. Simamora, Leader Performance Excellence Reasearch Group, Bina Nusantara University, Indonesia

 

ID 420         The Prediction of Needs of Humanitarian Aids Logistics for Merapi Eruption Victims in Sleman Yogyakarta

Naniek Utami Handayani, Dyah Ika Rinawati, Diana Puspita Sari and Projo Mukti Rifa’I, Department of Industrial Engineering, Faculty of Engineering, Diponegoro University, Semarang, Indonesia

ID 421         Case study on strategic development of genuine leather bags using canvas business model

Anita Maharani, Business Management Program, Management Department, BINUS Business School Master Program, Bina Nusantara University, Jakarta, Indonesia
Irene Teresa Rebecca Hutabarat, BINUS Entrepreneurship Center, Bina Nusantara University, Jakarta, Indonesia

ID 422         Simulation Analysis of Segmented CONWIP: Application to Reentrant Flow Lines

Yassin M. Shaalan, Ingy A. El-Khouly, and Khaled S. El-Kilany Department of Industrial and Management Engineering Arab Academy for Science, Technology, and Maritime Transport Alexandria, Egypt

ID 423         Dynamics of a Small Scaled Men-Owned Business

Anita Maharani, Business Management Program, Management Department, BINUS Business School Master Program, Bina Nusantara University, Jakarta, Indonesia
Irene Teresa Rebecca Hutabarat, BINUS Entrepreneurship Center, Bina Nusantara University, Jakarta, Indonesia

ID 424         Knowledge Management Enabler and Operational Performance in Indonesia Automotive Component Industry

Anita Silvianita, Business Administration, Faculty of Communication and Business, Telkom University, Bandung, West Java, Indonesia

ID 425         Improvement of Safety Maturity Model Affected by Policy and Institution to Build Safety Culture in Construction Sector

Johan Santoso and Yusuf Latief, Department of Civil Engineering, Universitas Indonesia, Depok, West Java, Indonesia

ID 428         Automatic Bicycle Gearshift:  A Disruptive Innovation and Design Thinking Perspective

Richardo Rusli, Muhammad Iqbal, Sthevany Karyono and Natanael Avellino , Computer Engineering Department, Students of Binus ASO, School of Engineering, Bina Nusantara University, Jakarta, Indonesia
Khristian Edi Nugroho Soebandrija, Faculty Member of Industrial Engineering Department and Binus ASO, School of Engineering, Bina Nusantara University, Jakarta, Indonesia

ID 429         Project Risk Management: The Role of Stakeholder Analysis

Rufaidah Yousef AlMaian, Industrial and Management Systems Engineering Department, Kuwait University, Kuwait
Amani Sulaiman Bu Qammaz, Civil Engineering Department, Kuwait University, Kuwait

ID 430         Development of Management System Audit Integration on Quality Management System, OH&S Management System, and Environmental Management System in Construction Project Management

A Sofuan Dwi Saputra and Yusuf Latief, Department of Civil Engineering, Universitas Indonesia, Depok, West Java, Indonesia

ID 431         Industrial Systems Engineering on Physical and Digital Banking:  A Service Innovation and Ambidexterity Perspective

Khristian Edi Nugroho Soebandrija, Faculty Member of Industrial Engineering Department, Faculty of Engineering, Bina Nusantara University, Jakarta, Indonesia

ID 432         Improvement Process in Drilling with Multi Spindle Boring, a Case of Student Industrial Internship Program

Gamawan Ananto and M. Shafry Firasyidnan, Bandung State Polytechnic for Manufacturing (POLMAN), Jl.Kanayakan 21, Bandung, Indonesia

ID 433         Trilogy of Service Innovation’s Antecedents:  Doctoral Dissertation Paper on Banking’s Financial and Non-Financial Performance

Khristian Edi Nugroho Soebandrija, Faculty Member of Industrial Engineering Department,Faculty of Engineering, Bina Nusantara University, Jakarta, Indonesia 

ID 436         Contractors’ Perspective on Application of Earned Value Analysis (Eva) As Cost Controlling Tools in Construction Projects

Mohd Amir Shazwan Hashim and Lee May Han, Quantity Surveying Department, INTI International University, Nilai, Negeri Sembilan, Malaysia
Nurul Munazzah Sadikin, Faculty of Built Environment, Linton University College, Mantin, Negeri Sembilan, Malaysia

ID 437         Community Based On Microfinance Service with Social Entrepreneur Concept Case Study: Parish of Robertus Cililitan

Hendro Budiyanto and Sri Witjaksono W, Program Doctoral Managemen SDM, Fakultas Pascasarjana , Universitas Mercu Buana, Jakarta, Indonesia

ID 438         Understanding supply chain resilience: a business dynamics approach using theory of constraints thinking process.

Mohamed Hicham Salah Eddine, Mohamed V University of Rabat, Morocco
Tarik Saikouk, Université Internationale de Rabat, Morocco
Abdelaziz Berrado, EMI, Morocco

ID 439         Challengers in Implementing Sustainable Building in Malaysia: The Importance of Considering End Users’ Needs

Hifzan Ilyana binti Mohd Amin, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia

ID 442         Case study – Using multicriteria analysis methods in project selection

Houda TAHRI and Omar DRISSI KAITOUNI, IMOSYS, Engineering, management and optimization of systems, Mohammadia School of Engineers, Avenue Ibn sina B.P. 765 Agdal Rabat, Morocco

ID 443         LIFE CYCLE VALUE STREAM MAPPING (LC-VSM): The Application in Two Botle Drinking Water Companies

Windy Megayanti, Maria Anityasari and Udisubakti Ciptomulyono, Sepuluh Nopember Institute of Technology, Surabaya, Indonesia

ID 444         Creating a KPI Tree for Monitoring and Controlling Key Business Objectives of First Mile Logistics Services

Ratih Hendayani, School of Economics and Business, Telkom University, Bandung, Indonesia
Graduate School of Business, Universiti Sains Malaysia, Penang, Malaysia
Yudi Fernando, Faculty of Industrial Management, Universiti Malaysia Pahang, Pahang, Malaysia
Yuvaraj Ganesan, Graduate School of Business, Universiti Sains Malaysia, Penang, Malaysia

ID 445         The relationship between Information Technology and Halal Logistics

Ratih Hendayani, School of Economics and Business, Telkom University, Bandung, Indonesia
Graduate School of Business, Universiti Sains Malaysia, Penang, Malaysia
Yudi Fernando, Faculty of Industrial Management, Universiti Malaysia Pahang, Pahang, Malaysia
Yuvaraj Ganesan, Graduate School of Business, Universiti Sains Malaysia, Penang, Malaysia

ID 446         Designing Training and Development Program for Competence Global Supply Chain Managers: A Depth Structured Interview

Puspita Wulansari, School of Economic and Business, Telkom University, Bandung, Graduate School of Business, Universiti Sains Malaysia, Penang Malaysia
Yudi Fernando, Faculty of Industrial Management, Universiti Malaysia Pahang, Pahang, Malaysia

ID 447         Indicators to Measure a Smart Education: An Indonesian Perspective

Indrawati, Wahyu Widodo and Husni Amani, Telkom University, Telekomunikasi Terusan Buah, Batu Bandung, Indonesia

ID 448         Using MCDM approaches to rank different locations for harnessing wind energy to produce hydrogen

Mostafa Rezaei, Mojtaba Qolipour, and Amir-Mohammad Golmohammadi Industrial Engineering Department, Yazd University, Yazd, Iran
Hengameh Hadian, Department of Industrial Engineering, University of Nahavand, Nahavand, Iran

ID 449         Location optimization of hybrid solar- wind plants by using FTOPSIS method

Mostafa Rezaei, Mojtaba Qolipour, and Amir-Mohammad Golmohammadi Industrial Engineering Department, Yazd University, Yazd, Iran
Hengameh Hadian, Department of Industrial Engineering, University of Nahavand, Nahavand, Iran

ID 450         Establishing wind farm for desalting sea water to produce hydrogen

Mostafa Rezaei and Amir-Mohammad Golmohammadi, Industrial Engineering Department, Yazd University, Yazd, Iran
Abbas Mahmoudabadi, Mehrastan University, Gilan, Iran

ID 454         Risk assessment study within manufacturing/remanufacturing system through maintenance actions

Sadok Turki, LGIPM, France

ID 455         Quality Assessment of Nylon Filament Yarn Product Using DMAIC Method and Failure Mode and Effect Analysis (FMEA) Method

Ratih Hendayani, School of Economics and Business, Telkom University, Bandung, Indonesia
Graduate School of Business, Universiti Sains Malaysia, Penang, Malaysia
Yudi Fernando, Faculty of Industrial Management, Universiti Malaysia Pahang, Pahang, Malaysia
Yuvaraj Ganesan, Graduate School of Business, Universiti Sains Malaysia, Penang, Malaysia

ID 456         Innovation Network Analysis to Support Innovation Capabilities of Kakao, Sengon and Porang (KaSePo) Cluster in Madiun Regency

Yudha Adi Kusuma and Bambang Syairudin, Industrial Engineering Department, Sepuluh Nopember Institute of Technology

ID 457         Procurement Performance Measurement: Opportunities and Challenges

Elisa Kusrini, Magister of Industrial Engineering and Industrial Engineering Department, Indonesian Islamic University

ID 458         Quality Management Strategy for Indonesian Aircraft MRO Companies Based on Kano Model, QFD Matrix, and AHP

Ramdha Dien Azka and Rahmat Nurcahyo, Department of Industrial Engineering, Universitas Indonesia, Salemba, Jakarta, Indonesia

ID 459         Core Competence Strategy Development of Batik Products in Pekalongan City

Fadila Paramitha and Rahmat Nurcahyo, Department of Industrial Engineering, Universitas Indonesia, Salemba, Jakarta, Indonesia

ID 460         Safety Perceptions and Safety Behavior in University Teaching Laboratory

Nur Annisa Faradilla Puteri and Rahmat Nurcahyo, Industrial Engineering Department, Universitas Indonesia, Jakarta, Indonesia

ID 461         Two – Way Radio Line Productivity Improvement Using Lean Six Sigma

Norzima Zulkifli and Mohd Zahreen Firdaus Mustapha, Department of Mechanical and Manufacturing Engineering, University of Putra Malaysia

ID 462         The Influence of Nonlinear Loads on Optimal Operation Control of Electrical Distribution System

Agus Ulinuha, Department of Electrical Engineering, UniversitasMuhammadiyah Surakarta, Surakarta, Central Java, Indonesia

ID 463         Manufacturing Capability, Sustainability Strategy, and Manufacturing Performance of Indonesia Automotive Manufacturer

Edwin Aditya Herbanu, Department of Industrial Engineering, Universitas Indonesia, Salemba, Jakarta, Indonesia
Rahmat Nurcahyo, Department of Industrial Engineering, Universitas Indonesia, Kampus Baru UI Depok, Depok, Indonesia

ID 464         Simultaneous consideration of assemblability and disassemblability for fastening method selection

M.W. Geda and Dr. C.K. Kwong, Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hong Kong, CHINA

ID 465         Performance Improvement of Corporate Travel Agent Using Business Intellegence

Anggi Octaviani, Postgraduate student of Industrial Engineering Master Program, Universitas Mercu Buana Jakarta, Indonesia
Sawarni Hasibuan, Industrial Engineering Department, Universitas Mercu Buana Jakarta, Indonesia

ID 467         The Integration of Kano’s Model and Quality Function Deployment: A Case Study for Design of An Alternative Energy Utilization

Rosnani Ginting and Juliza Hidayati, Departement of Industrial Engineering, University of North Sumatra, Medan, Indonesia

ID 469         An Empirical Testing on Quality Label Equity Model

Tri Rakhmawati, Sik Sumaedi and I Gede Mahatma Yuda Bakti, Research Center for Quality System and Testing Technology, Indonesian Institute of Sciences, South Tangerang, Banten, Indonesia

ID 470         Revolutionize Supply Chain Collaborations through Cloud Implementation

Dissa R. Chandra, Faculty of Industrial Technology, Bandung Institute of Technology, Bandung, Indonesia
Jos van Hillegersberg, Faculty of Behavioral, Management and Social Sciences, Department of Industrial Engineering and Business Information Systems, University of Twente, Enschede, The Netherlands

ID 471         Investigating the benefits and challenges of the implementation of ISO 9001 and ISO 14001 in the aerospace industry

Novia Ayu Pratama, Vikas Kumar and Archana Kumari, Bristol Business School, University of the West of England, Bristol, UK
Jose Arturo Garza-Reyes and Simon Peter Nadeem, Derby Business School, The University of Derby, Derby, UK

ID 473         Designing Nonconforming Services (NCS) Control System for ISO 9001 Implementation

Sih Damayanti, Tri Rakhmawati, Sik Sumaedi and I Gede Mahatma Yuda Bakti, Research Center for Quality System and Testing Technology, Indonesian Institute of Sciences, South Tangerang, Banten, Indonesia

ID 474         Designing Customer Satisfaction Measurement System for a SME Laundry Services Company

Tri Rakhmawati, Sik Sumaedi and I Gede Mahatma Yuda Bakti, Research Center for Quality System and Testing Technology, Indonesian Institute of Sciences, South Tangerang, Banten, Indonesia

ID 475         Ultradiscrete exponential Newell-Whitham model: A cellular-automaton model for traffic flow

Kouyo Suzuki, Graduate School of Science and Engineering, Hosei University Graduate Schools, Kajino-chyou, Koganei-shi, Tokyo, Japan
Shin Isojima, Faculty of Science and Technology, Hosei University, Kajino–chyou, Koganei-shi, Tokyo, Japan

ID 476         Design of Customer-driven Facility Management System for Universities

Grace Lorraine D. Intal, School of Information Technology, School of Industrial Engineering, Mapua University, Intramuros, Manila Philippines
Rex Aurelius C. Robielos and Alysia Geogia B. Ortega, School of Industrial Engineering and Engineering Management, Mapua University, Intrramuros Manila, Philippines

ID 477         Unemployment Rate And Economic Growth Modelling With Generalized Spatial Three Stage Least Square (GS3SLS) in East Java

Agus Muslim and Anik Djuraidah, Department of Statistics, Faculty of Mathematics and Natural Sciences, Bogor Agricultural University, Bogor, Indonesia

ID 478         Implementation and Management of ERP Systems: A Literature Review

Mohamed-Iliasse Mahraz and Loubna Benabbou, Equipe MOAD-SCM, Ecole Mohammadia d’Ingénieurs, Mohammed V University of Rabat, Morocco
Abdelaziz Berrado, Equipe AMIPS, Ecole Mohammadia d’Ingénieurs, Mohammed V University of Rabat, Morocco

ID 479         Supplier selection through Attractive criteria: a Fuzzy Kano based integrated MCDM approach

Naveen Jain, Department of Mechanical Engineering, Shri Shankaracharya Institute of Professional Management and Technology, Raipur, India,
Vinay Surendra Yadav; H.K. Narang and A. R. Singh ,Department of Mechanical Engineering, National Institute of Technology Raipur, Chhattisgarh, India

ID 480         The airport connectivity of medium airports in Thailand

Charukit Chaiwan and Korrakot Yaibuathet Tippayawong, Industrial Engineering Department, Faculty of Engineering, Chiang Mai University, Chiang Mai, Thailand

ID 481         Model Scheduling with Dynamic Trip for Public Transportation

Andreas Tri Panudju, Department of Industrial Engineering, Trisakti University, Jakarta, Indonesia
Listiawati, Management Department, Bina Bangsa University, Serang, Indonesia
Mira Marlina, Science and Mathematics Department, Bina Bangsa University, Serang, Indonesia

ID 482         Prediction of project completion time using robust time series regression

Hong Long Chen, Department of Business and Management, National University of Tainan, Tainan, Taiwan

ID 483         Evaluation of Combustion Performance of Waste Tyre Pyrolysis Oil on Variable Compression Ratio, Single Cylinder Diesel Engine

Rajesh N. Pote, Assistant Professor, Department of Mechanical Engineering, TSSM’s Bhivarabai Sawant College of Engineering and Research, Pune, Maharashtra, India
Dr. Rajendra K. Patil, Professor, Department of Mechanical Engineering, PES’s Modern College of Engineering, Pune, Maharashtra, India

ID 484         Discrete Wavelet Packet Based Spectrum Sensing in Cognitive Radio using an Improved Adaptive Threshold

Dibal Peter Yusuf, Elizabeth Onwuka, and Caroline, Alenoghena, Telecommunications Engineering Department, Federal University of Technology Minna
James Agajo, Computer Engineering Department, Federal University of Technology Minna

ID 486         Application of Reliability Engineering Method in Sugar Refinery Industry

N Sembiring, E Ginting and T Daniello, Department of Industrial Engineering, Faculty of Engineering, Universitas Sumatera  Utara, Jalan Almamater Kampus USU, Medan.

ID 487         Value Chain Analysis for Determining Innovation Priority in Batik Small Medium Industry

Afrin Fauzya Rizana, Amelia Kurniawati, T.M.A. Ari Samadhi, Iwan Inrawan Wiratmadja and Indryati Sunaryo, Department of Industrial Engineering, Telkom University, Bandung, Indonesia

 

ID 490         Toward a Conceptual Framework of Piper retrofractum Supply Chain Performance

Issa Dyah Utami, Department of Industrial Engineering, University of Trunojoyo Madura, Jl. Raya Telang, Kamal, Bangkalan, Madura

ID 491         Analysis Implementation Effectiveness of ISO / IEC 17025 on Testing Laboratory

Irma Permata Sari, Department of Industrial Engineering, Faculty of Engineering, University of Indonesia, New Campus UI, Depok, Indonesia

ID 493         A green design chain collaboration model for TFT-LCD industry

JrJung Lyu and Wei-Ting Chen, Department of Industrial and Information Management, National Cheng Kung University, Tainan , Taiwan, R.O.C

ID 497         Spatial Information and Geoadditive Model for Small Area Statistics

Novi Hidayat Pusponegoro, Statistics Department, Institute of Statistics, Jakarta, Indonesia
Anik Djuraidah, Statistics Department, Bogor Agricultural University, Bogor, Indonesia

ID 498         Design Mitigation of Blood Supply Chain Using Supply Chain Risk Management Approach

Roy Enggar Achmadi and Agus Mansur, Department of Industrial Engineering, Universitas Islam Indonesia, Yogyakarta, Indonesia

ID 499         Analysis of Key Factors for Airport Service Quality: A Case Study of Three Regional Airports in Thailand

Sarocha Kratudnak, Department of Industrial Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai, Thailand
Korrakot Yaibuathet Tippayawong, Excellence Center in Logistics and Supply Chain Management, Faculty of Engineering, Chiang Mai University, Chiang Mai, Thailand

ID 500         A Predictive Model of Motorcycle Accident Involvement Using Structural Equation Modeling Considering Driver Personality and Riding Behavior in Metro Manila

Aaron Bathan, James de Ocampo, Jasper Ong, Alma Maria Jennifer Gutierrez, Rosemary Seva and Ronald Mariano, Industrial Engineering Department, De La Salle University – Manila, Philippines

ID 501         Bayes Spatio-temporal Models for East Java Poverty Analysis with R-INLA

Ro’fah Nur Rachmawati, Statistics Department, Bina Nusantara University, Kebun Jeruk Raya, Jakarta Barat, Indonesia
Anik Djuraidah, Statistics Department, Bogor Agricultural University, Jl. Raya Darmaga, Bogor, Indonesia

ID 502          Managing Project Scope Creep: An Exploratory Study

Mian Ajmal and Mehmood Khan, Abu Dhabi University, United Arab Emirates
Mohsin Malik, The University of Melbourne, Australia

ID 503          Relationship between Risk Factors and Risk Information Sharing at SME’s In Bandung

Sri Widiyanesti, School of Ecoonomic and Business, Telkom University, Bandung, Indonesia
Yudi Fernando, Faculty of Industrial Management, Universiti Malaysia Pahang, Pahang, Malaysia
Prof Azlan Amran, Graduate School of Business, Universiti Sains Malaysia, Penang, Malaysia

ID 504          Supplier Relationship Management Based On Process Capability Index for Multiple Characteristics

Erik Bagus Prasetyo and Nani Kurniati, Industrial Engineering Departement, Institut TeknologiSepuluh Nopember, Jl. Arif Rahman Hakim Sukolilo, Surabaya, Indonesia

ID 505          Optimization of Supply Chain Network Design for Multiple-Channel Distribution

Vinay Surendra Yadav and A. R. Singh, Department of Mechanical Engineering, National Institute of Technology Raipur, Chhattisgarh, India
Naveen Jain, Department of Mechanical Engineering, Shri Shankaracharya Institute of Professional Management and Technology, Raipur, India

ID 506          The Influence of Culture, Job Satisfaction and Motivation on the Performance Lecturer / Employees

Linda Theresia, A H Lahuddin and Gadih Ranti, Industrial Engineering Department, Institut Teknologi Indonesia
Ramon Bangun, Faculty of Administrative Science, Universitas Indonesia

ID 507          Digital Terrestrial TV in Philippines: What is in for the media consumer?

Rex Mervin P. Ramos, School of Graduate Studies, Mapúa University, Manila, Philippines
Rene D. Estember, School of Industrial Engineering and Engineering Management, Mapúa University, Manila, Philippines

ID 508          Integration of Maintenance and Quality Control Policy Based On Variable Sampling Plan Using Process Capability Index

Shofi Fitrotis Salimah and Nani Kurniati, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember (ITS), Surabaya, Indonesia

ID 509          Business Strategy with Uncertainty and Performance

Ary Kurniati, Department of Industrial Engineering, Universitas Indonesia, Salemba, Jakarta, Indonesia
Rahmat Nurcahyo, Department of Industrial Engineering, Universitas Indonesia, Kampus Baru UI Depok, Depok, Indonesia

ID 510          Confucianism Culture Study in Improving the Performance of Employees

Iman Sudirman, Budhi Priharto, Indriyati Sunaryo, Industrial Engineering Study Program, Bandung Institute of Technology, Bandung, Indonesia
Nyoto, Management Study Program, Padjajaran University, Bandung, Indonesia
Aditya Parama Setiaboedi, Engineering Management Study Program, Bandung Institute of Technology, Bandung, Indonesia

ID 511          The Impact of Integrated Management System Implementation on Operational Performance in Industry

Elfianus Ivan Alfredo, Department of Industrial Engineering, University of Indonesia, Salemba, Jakarta, Indonesia
Rahmat Nurcahyo, Department of Industrial Engineering, University of Indonesia, Kampus Baru UI, Depok, Indonesia

ID 512          Model development of Multi depot SDVRPTW using Tabu Search algorithm

Ali Alhureibi, Amelia Santoso and  Dina Natalia Prayogo, Industrial Engineering, Engineering Faculty, Universitas Surabaya, Surabaya, Indonesia

ID 513          Conceptual Model for Online Marketing Strategy to Success in the Survival Phase of Small Firms

Aditya Parama Setiaboedi, Hasrini Sari, Budhi Prihartono, Department of Industrial Engineering and Engineering Management, Institut Teknologi Bandung, Bandung, Indonesia

ID 514          A Simulation Approach for Determining Delivery Time in a Waste Materials Based Make-To-Order Manufacturing Company

Nur Indrianti, Bachtiar Rakagandhi and Tri Wibawa, Department of Industrial Engineering, Universitas Pembangunan Nasional “Veteran” Yogyakarta, Yogyakarta, Indonesia

ID 515          A Framework for Evaluating the Performance of Supply Chain Risk in E-commerce

Abraham Stefanus and Markus Hartono, Industrial Engineering, Engineering Faculty, Universitas Surabaya, Surabaya, Indonesia

ID 517          A FEA-based feasibility study on the replacement of student wooden desks and chairs with a plastic arm chair.

Rumbidzai Prosper Jera, University of Zimbabwe, Department of Mechanical Engineering, Post Office Box MP167, Mount Pleasant, Harare, Zimbabwe
Tawanda Mushiri, University of Johannesburg, Department of Mechanical Engineering Science, Faculty of Engineering and the Built Environment, Post Office Box APK 524 Auckland Park, Johannesburg, South Africa

ID518          Finite element analysis on Nitric Acid Compressor Expansion (NACE) turbine

Rutendo Sandra Leman and Tawanda Mushiri , Department of Mechanical Engineering, University of Zimbabwe,Mt Pleasant, Harare Zimbabwe
Milton Masukume, National University of Science and Technology, Ascot, Bulawayo, Zimbabwe

ID519          Design for manufacture and assembly of a paper cup making machine in a developing nation

Kudakwashe N. Masengere and Tawanda Mushiri, Department of Mechanical Engineering, University of Zimbabwe, Mt Pleasant, Harare, Zimbabwe

ID 520          Time Table Scheduling for Educational Sector on an E-Governance Platform: A Solution from an Analytics Company

Vimal Kumar and Nagendra Kumar Sharma, Department of Management Studies, Maulana Azad National Institute of Technology (MANIT) Bhopal, India
Ankita Malviya, Indian Space Research Organization (ISRO), India
Pratima Verma, Department of Industrial & Management Engineering, Indian Institute of Technology Kanpur, Kanpur, India
Vignaesh Muthukumaar, Consultant, EXL Services, Bengaluru, India
Sunil Kumar Jauhar, Department of Mechanical Engineering, Maulana Azad National Institute of Technology, MANIT, Bhopal, India

ID 522         A cloud based architecture for Automatic Feature Recognition in Distributed manufacturing environment

Y Poornachandra Sekhar and Vijay Kumar Manupati, School of Mechanical Engineering,VIT University, Vellore,Tamil Nadu, India

ID 524         The Performances of Process Capability Indices in the Six-Sigma Competitiveness Levels

Vimal Kumar, Department of Management Studies, National Institute of Technology Bhopal, India
Pratima Verma, Department of Industrial & Management Engineering, Indian Institute of Technology Kanpur, Kanpur, India
Vignaesh Muthukumaar, Consultant, EXL Services, Bengaluru, India

ID 531         Implementation of Horizontal Strategy for Conglomerate firms: The Role of Five-Factor Model

Pratima Verma, Department of Industrial & Management Engineering, Indian Institute of Technology Kanpur, Kanpur, India
Vimal Kumar and Rahul Gajbhiye, Department of Management Studies, National Institute of Technology Bhopal, India
Vignaesh Muthukumaar, Consultant, EXL Services, Bengaluru, India

ID 532         Equal Distribution of Shortages in Supply Chain Problem of Food Corporation of India

Vimal Kumar, Department of Management Studies, National Institute of Technology Bhopal, India

ID 534         The Application of Lean Six-Sigma for Improvement in Bead Manufacturing Process throughout Cooperative and Work Integrated Education Program (CWIE)

Jedsada Tipmontianand Sunisa Sangtakorn Chanoknart Ngamkham, Department of Agro-Industry Technology and Management, Faculty of Agro-Industry, King Mongkut’s University of Technology North Bangkok, Noenhom, Muang Prachinburi, Prachinbi, Thailand

ID 535         The Application of Design of Experiment for Improvement on Filtration Process of Thickness Chicken Soup Manufacturing throughout Cooperative and Work Integrated Education Program (CWIE)

Manufacturing throughout Cooperative and Work Integrated Education Program (CWIE)
Jedsada Tipmontianand Nahathai Thapanawichit, Department of Agro-Industry Technology and Management, Faculty of Agro-Industry, King Mongkut’s University of Technology North Bangkok Noenhom, Muang Prachinburi, Prachinbi, Thailand

ID 536         Model of Integration of Lean Tools and Knowledge Management to improve the production process in a Metal-mechanic company

Gianella Damacen, Department of Business Management Engineering, Universidad Peruana de Ciencias Aplicadas, Lima, Perú

ID 537         An Energy Audit to Minimize Waste Energy in Weaving AJL 2 Departement PT. Daya Manunggal Textile

Naniek Utami Handayani, Hery Suliantoro, Achmad Ismail Marzuki and Anita Mustikasari, Department of Industrial Engineering, Faculty of Engineering, Diponegoro University, Semarang, Indonesia

ID 538         Extended Statistical JAVA Gaming Simulation

Timothy Liu, Mason Chen, and Joseph Jang, Lynbrook High School, Milpitas Christian School, and Monta Vista High School, San Jose, CA, USA

ID 539         Increasing Value Added in an automotive assembly line. A case study.

Michelle Eugenia Sánchez Barrientos, Valeria Argumedo Hinojosa, Fabiola Mercedes Arango García, Teresa Verduzco-Garza and Jesús Vázquez, Fernando González-Aleu, Department of Engineering, Universidad de Monterrey, Nuevo León, México

ID 540         The Integrated Method of Warehouse Layout and Labor Scheduling to Reduce Overtime

Fransisca Dini Ariyanti, Aurellia Victoria, Lidya Guestine and Noviana, Industrial Engineering, Faculty of Engineering, Bina Nusantara University, KH. Syahdan, Jakarta, Indonesia

ID 541         Fuzzy House of Risk (FHOR) to Manage Supply Chain Risk

Widya Nurcahayanty Tanjung, Selma Intan Praditya Sari Himawan and Syarif HidayatIndustrial Engineering, Faculty of Science and Technology, Al Azhar Indonesia University, Jakarta, Indonesia

ID 542         Comparison Method of Spatial Autoregressive Probit Estimation

Fevi Novkaniza, Department of Mathematics, Faculty of Mathematics and Natural Science, University of Indonesia, Depok, Indonesia
Anik Djuraidah, Department of Statistics, Faculty of Mathematics and Natural Science, Bogor Agricultural Institute, Bogor, Indonesia

ID 544         Geographically Weighted Zero-Inflated Poisson Regression (GWZIPR) for Excess Zero Problems and Heterogenity of Spatial Data: Application for Number of Diphtheria Disease Cases in West Java Province in 2014

Ma’rufah Hayati Mt, Department of Statistics, The University of Nahdlatul Ulama Lampung, Sukadana, Indonesia
Anik Djuraidah, Department of Statistics, Faculty of Mathematics and Life Science, Bogor Agricultural University, Dramaga Bogor Indonesia

ID 545         Computerized Maintenance Management System for the Philippine’s Railway Transit

Beatrice Michaela L. Felipe, Maria Patricia B. Javier and Rene D. Estember, School of Industrial Engineering and Engineering Management, Mapua University, Manila, Philippines

ID 546         Development of Ergonomics Intervention in Manual Material Handling to Prevent Work Related Musculoskeletal Disorder

Ryan Jeffrey P. Curbano, Department of Industrial Engineering, Lyceum of the Philippines Laguna
Makiling, Calamba, Laguna

ID 547         A Review on the Reliability, Availability and Maintainability (RAM) Approaches In Conceptual Process Design

Narendra Kumar and P. C. Tewari, Department of Mechanical Engineering, National Institute of Technology, Kurukshetra, INDIA

ID 548         Fault Feature Extraction And Diagnosis of Gear Transmission System Using EMD and Machine Learning Approach

Mallikarjuna Reddy, Department of Design and Automation, School of Mechanical Engineering, VIT University, Vellore, Tamilnadu, India

ID 551         Feasibility of using a hybrid Photovoltaic-Wind Power Plant to Produce Hydrogen for Hendijan in the Southwest of Iran

Mojtaba Qolipour, and Mostafa Rezaei, Industrial Engineering Department, Yazd University, Yazd, Iran
Amir-Mohammad Golmohammadi, Industrial Engineering Department, Yazd University,
Hengame Hadian, Industrial Engineering Department, Nahavand University, Nahavand, Iran
Mehdi Soltani, Faculty of Industrial and Mechanical Engineering, Islamic Azad University, Qazvin Branch, Qazvin, Iran

ID 552         An optimization model of renewable electricity price and construction of new wind power plants for Kermanshah, Iran

Mojtaba Qolipour, and Mostafa Rezaei, Industrial Engineering Department, Yazd University, Yazd, Iran
Amir-Mohammad Golmohammadi, Industrial Engineering Department, Yazd University,
Hengame Hadian, Industrial Engineering Department, Nahavand University, Nahavand, Iran
Mehdi Soltani, Faculty of Industrial and Mechanical Engineering, Islamic Azad University, Qazvin Branch, Qazvin, Iran

ID 553         Implementing Fuzzy Rank Function Model for a New Supply Chain Risk Management

Mojtaba Qolipour, and Mostafa Rezaei, Industrial Engineering Department, Yazd University, Yazd, Iran
Amir-Mohammad Golmohammadi, Industrial Engineering Department, Yazd University,
Hengame Hadian, Industrial Engineering Department, Nahavand University, Nahavand, Iran
Mehdi Soltani, Faculty of Industrial and Mechanical Engineering, Islamic Azad University, Qazvin Branch, Qazvin, Iran

ID 554         Identifying the effective factors for implementing solar water heaters (SWH) for Yazd, Iran

Mojtaba Qolipour, and Mostafa Rezaei, Industrial Engineering Department, Yazd University, Yazd, Iran
Amir-Mohammad Golmohammadi, Industrial Engineering Department, Yazd University,
Hengame Hadian, Industrial Engineering Department, Nahavand University, Nahavand, Iran
Mehdi Soltani, Faculty of Industrial and Mechanical Engineering, Islamic Azad University, Qazvin Branch, Qazvin, Iran

ID 555         Cost Estimation Model of Structural Steel for Super Structure of Wellhead Platform in Oil and Gas Industry

Ahmad Ammar Luqman Abdullah, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Johor Bahru, Johor, Malaysia
Syed Ahmad Helmi, Center for Engineering Education, Universiti Teknologi Malaysia, Johor Bahru, Johor, Malaysia
Muhammad Hisjam, Department of Industrial Engineering, Faculty of Engineering, Sebelas Maret University, Surakarta, Indonesia

ID 556         System Dynamics Approach to Supply Chain Performance Measurement in Small and Medium Enterprise

Keifa Vamba Konneh and Azanizawati Ma’aram1, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Johor Bahru, Johor, Malaysia
Syed Ahmad Helmi, Center for Engineering Education, Universiti Teknologi Malaysia, Johor Bahru, Johor, Malaysia
Muhammad Hisjam, Department of Industrial Engineering, Faculty of Engineering, Sebelas Maret University, Surakarta, Indonesia

ID 557    Business Process Functional Training Manual Creation and Standardisation

Abhijit T and Mridula Sahay, Amrita School of Business, Amrita Vishwa Vidyapeetham University, Coimbatore, India

ID 558         The Effect of Dynamic, Innovation and Alliances Capability on Sustainable Competitive Advantage in Digital Disruptive for Incumbent Telecommunication Firm

Leonardus W. Wasono Mihardjo and Asnan Furinto, Doctor of Research in Management, Graduated Program, Bina Nusantara University, West Jakarta, Indonesia
Riza A. N. Rukmana, Industrial Engineering Department, Telkom University, Bandung, Indonesia

ID 559         Conceptual map based on system dynamics thinking for operating room theatre

Mahmoud Zeid, Mohamed Grida, M. Adel El-baz and Gamal Nowara, Industrial Engineering Department, Engineering Faculty, Zagazig University, Zagazig, Egypt

ID 560         Identification Indicators and Variables to Measure the Implementation of Smart Safety and Security (a Study in Bandung City)

Indrawati and Mochamad Lutfi Ariffianto, Telkom University, Telekomunikasi Terusan Buah Batu Bandung, Indonesia

ID 561         Case Study: Implementation of Business Process Management System in Technical Inspection CRM of National Iranian Gas Company.

Ali Massaeli, Department of Technical Inspection, National Iranian Gas Company, Tehran, I. R. of IRAN

ID 562         Ergonomic Analysis for Musculoskeletal disorder Prevention of workers in Operation Prepare Room

Chih-Wei Lu, Chung Yuan Christian University, Taiwan

ID 563         Palm Oil Plantation Revitalization Model for the Agroindustry Development

Juliza Hidayati , Departement of Industry Engineering, Faculty of Engineering , Universitas Sumatera Utara, Medan -Indonesia
Sukardi , Ani Suryani , Anas Miftah Fauzi, Departement of Agriculture Industry Technology
Bogor Agricultural University, Bogor – Indonesia
Sugiharto, PT Pertamina (Persero) Jakarta -Indonesia

ID 564         Lean IT adoption: Success cases in Portuguese banks

Cátia Lobato Ferreira , Maria Henriqueta Almeida , António Grilo, Departamento de Engenharia Mecânica e Industrial and UNIDEMI, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa , Caparica, Portugal

ID 566         Model of Continuous Review System with Backorder Case for Inventory Planning and Control: A Methanol Industry Case Application

Sri Indrawati, Vembri Noor Helia and Kukuh Andhityara, Industrial Engineering Department, Faculty of Industrial Technology, Universitas Islam Indonesia

ID 567         Head and face anthropometric measurements for Saudi Arabian Females

Abdalla Alrashdan, Aisha Alkaff and Shatha Khamis, Industrial Engineering Department, Alfaisal University, Riyadh, Saudi Arabia

ID 568         Formulating Lignin Based Surfactant Using Extracted Lignin from Ultrasound-Assisted Technique for Surfactant Flooding

Kenny Ganie and Muhammad A Manan, Department of Petroleum Engineering, Universiti Teknologi Malaysia, UTM Skudai, Johor, Malaysia
Ahmad Kamal Idris, Department of Petroleum Engineering, Universiti Teknologi PETRONAS Seri Iskandar, Perak, Malaysia

ID 569         The Role of Information and Communication Technology in Construction Risk Management

Amani Sulaiman Bu Qammaz, Civil Engineering Department, Kuwait University, Kuwait
Rufaidah Yousef AlMaian, Industrial and Management Systems Engineering Department, Kuwait University, Kuwait

ID 570         Measuring Job Strain Index For Batik’s Workers

Dian Palupi Restuputri, Industrial Engineering Department, University of Muhammadiyah Malang, Jln Raya Tlogomas , Malang

ID 571         Human Risk Factors and Road Accident Causation among Motorcyclists in Malaysia: A Review Article

Siti Hawa Harith and Norashikin Mahmud, Universiti Teknologi Malaysia

ID 572         Analyzing the Impact of Human Characteristics on the Comprehensibility of Road Traffic Signs

Nazha R. Ghadban, Wael Alhajyaseen and Khalifa N. Al-Khalifa , Qatar Transportation and Traffic Safety Center (QTTSC), Qatar University, Doha – Qatar
Galal M. Abdella ,Department of Mechanical and Industrial Engineering, Qatar University, Doha – Qatar

ID 574         Applying Social Cognitive Theory to HRM Practices, HR Roles, and Firm Performance

Ivana Chandra Voo and Khairiah Soehod, Faculty of Management, Universiti Teknologi Malaysia, Johor Bahru, Johor, Malaysia
Choi Sang Long, Faculty of Business, Raffles University Iskandar

ID 575         Does Organizational Justice Influence Organizational Citizenship Behavior among Engineers – A Conceptual Paper

Jen Ling Gan and Halimah M. Yusof, Faculty of Management, Universiti Teknologi Malaysia, UTM Skudai, Johor, Malaysia.

ID 576:      Does Emotional Intelligence Influence Organizational Citizenship Behavior among Engineers – A Conceptual Paper

Jen Ling Gan and Halimah M. Yusof, Faculty of Management, Universiti Teknologi Malaysia, UTM Skudai, Johor, Malaysia.

ID 578         HRM Practices and Firm Performance: The Mediation of HR Roles

Ivana Chandra Voo and Khairiah Soehod, Faculty of Management, Universiti Teknologi Malaysia, Johor Bahru, Johor, Malaysia
Choi Sang Long, Faculty of Business, Raffles University Iskandar

ID 579         Application of Knowledge Discovery in Database (KDD) Techniques in Cost Overruns of Construction Projects

Mai Monir Ghazal and Dr. Ahmed Mohamed Hammad, Department of Industrial Engineering and Engineering Management, University of Sharjah, Sharjah, U.A.E

ID 580         The Influence of Internal Auditors And Organizational Justice With Company Code of Practice As Moderating Variables Against Fraud Prevention Through Employee Perceptions In PT Jaya Konstruksi Manggala Pratama Tbk

Luqman Hakim, M.Si , Doctoral Program of the Finance Management, Faculty of Graduate Studies University Mercu Buana, Jakarta, Indonesia
Sabil, SE, MM, Doctoral Program of Business Management, Pancasila University , Jakarta, Indonesia

ID 581         Benefits of Green Building- a case study of Johannesburg

Elizabeth Ojo-Fafore, Clinton Aigbavboa and Pretty Remaru, Department of Construction Management and Quantity Surveying, University of Johannesburg, Johannesburg, South Africa

ID 582         SUSTAINABLE CITY DEVELOPMENT – A REVIEW

Elizabeth Ojo-Fafore, Clinton Aigbavboa and Wellington Thwala, University of Johannesburg, South Africa

ID 584         Leadership Style and Employee Turnover Intention

Geeta Ann Sulamuthu and Halimah Mohd Yusof, Faculty of Management, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia

ID 585         Leadership Style and Employee Engagement

Geeta Ann Sulamuthu and Halimah Mohd Yusof, Faculty of Management, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia

ID 586         Measuring Robustness of Water Distribution Networks Using Informational Entropy (Revised)

Seyed Ashkan Zarghami, Indra Gunawan and Frank Schultmann, Entrepreneurship, Commercialisation & Innovation Centre (ECIC), The University of Adelaide, Australia

ID 587         Work-Related Musculoskeletal Risk Assessment among Structural Iron Workers in a Steel Company in the Philippines

Pauline Irish D. Jalac, John Paul E. Sison and  John Michael Y. Fedilo, Department of Industrial Engineering, Technological Institute of the Philippines, Quezon City, Philippines

ID 588         The Impact of Stress: Systematic Review

Norliyana Zakaria and Halimah Mohd Yusof, Faculty of Management, University of Technology Malaysia, Johor Bahru, Malaysia

ID 589         The Relationship between Big Five Personality towards Career Success among Employees

Norliyana Zakaria and Halimah Mohd Yusof, Faculty of Management, University of Technology Malaysia, Johor Bahru, Malaysia

ID 590         Challenges of implementing ISO 55000: a case study from an educational institute

Asayel Albalghouni, Fatimah Alkatheeri, Nada Elbaioumy, Wafa Albaiti, Imad Alsyouf, Mohammad Shamsuzzaman and  Sadeque Hamdan , Sustainable Engineering Asset Management (SEAM) Research Group, Industrial Engineering and Engineering Management Department, University of Sharjah , Sharjah, United Arab Emirates

ID 591         Development of Sustainable Maritime Industry to Strengthen Regional Innovation System in Lamongan Regency

Septiyan Adi Nugroho ST, Prof. Dr. Ir. Udisubakti Ciptomulyono M.Eng.Sc, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, 60111, Indonesia
Dr.Ir. Niniek Fajar Puspita M.Eng, Department of Chemical Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
Murdjito MSc Eng., Department of Ocean Engineering, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

ID 592         Performance of class aggregation in a multiple class inventory rationing problem

Sugoutam Ghosh, Singapore University of Social Sciences, Singapore

ID 593         A Conceptual Framework of Risk Identification for Scale up Companies in Transition Period

Ahmad Nadali , Antonio Grilo and Aneesh Zutshi, UNIDEMI, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Lisbon, Portugal

ID 594         Techno-economic modeling in advanced ceramic materials manufacturing using Spark plasma sintering technology

Mmakwena. C Tsipa and Mukondeleli. G Kanakana, Department of Industrial Engineering, Tshwane University of Technology, Pretoria, South Africa

ID 595         Anthropometry of Saudi Arabian male workers

Abdalla Alrashdan, Mohamed Albassam, Abdullah Alkohlani, and Meshal Alkadi, Industrial Engineering Department, Alfaisal University, Riyadh, Saudi Arabia

ID 596         Measurement of Innovation Performance in Selected industries in Sultanate of Oman

Ahm Shamsuzzoha, Mahmood Al-Kindi and Emad Summad, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman

ID 597         Innovation Diffusion: Application of Agent-Based Modelling and Simulation in a Case Company in Sultanate of Oman

Emad Summad, Mahmood Al-Kindi and Ahm Shamsuzzoha, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman

ID 598         Development of a Framework for Reliability Centered Maintenance

G. Gupta, R. P. Mishra and N. Mundra, Department of Mechanical Engineering, Birla institute of technology and sciences, Pilani Campus, Pilani (Raj), India

ID 599         Awetism: A User Ergonomic Learning Management System Intended for Autism Diagnosed Students in the Philippines

Ryan Christopher M. Malicdem, Diana M. Jumadiao, Jevi Jee S. Umbac, Angel Joy J. Quizon, Leonard Jessie P. Repollo and Yoshiki B. Kurata, Department of Industrial Engineering, Technological Institute of the Philippines, Quezon City, Philippines

ID 600         Towards a characterization   of cross-border banking supervisory systems:  Case of Morocco as an emerging country

Abdelilah Harrat and Abdelaziz Berrado, Research Team AMIPS, University Mohammed V in Rabat, Ecole Mohammedia d’Ingenieurs, Rabat, Morocco

ID 601         Usability Evaluation of an Educational Management System affecting the User – Satisfaction among Tertiary Students in an Undergraduate Engineering Program in the Philippines

Alec Steven L. Ardan, John Ruther A. Faustino, Mariel Jorinda G. Garcia,Vanessa G. Tenio and Yoshiki B. Kurata, Department of Industrial Engineering, Technological Institute of the Philippines, Quezon City, Philippines

ID 602         Process Value Analysis for Wood-Based Furniture Company in the Philippines using VA/VE Approach

John Paul E. Sison, Pauline Irish D. Jalac, Juan Miguel N. Dinglasan, Maricar M. Navarro, Arriane A. Palisoc and Mel Benjamen A. Torres, Department of Industrial Engineering , Technological Institute of the Philippines, Quezon City, Philippines

ID 604         Defect Control via Forecasting of Processes’ Deviation as JIDOKA Methodology

Ahmed M. Abed and Adel Abd Elmo’z Ibrahim, Department of Industrial Engineering, Zagazig University, Egypt

ID 605        Life Cycle Assessment of Rice Processing

Kamalakkannan and Asela K. Kulatunga, Department of Manufacturing & Industrial Engineering, University of Peradeniya, Sri Lanka

ID 606       Optimizing National Resource Usage through the Integration of University Shuttle Service with the Public Rail: The Case Study in Qatar University

Aisha Al Hammadi, Amna Al Baker, Jawaher Al-Fakhroo, Galal Abdella  and Khalifa Al-Khlalifa, College of Engineering , Qatar University, Qatar

ID 608      Challenges of Digital Collaboration in the South African Construction Industry

Ayodeji Oke, Douglas Aghimien, Clinton Aigbavboa and Nteboheng Koloko, University of Johannesburg, South Africa

ID 610       Value Management for Sustainable Built Environment in Nigeria

Aghimien Douglas Omoregie, Oke Ayodeji Emmanuel, Aigbavboa Clinton Ohis, Department of Construction Management & Quantity Surveying, University of Johannesburg, South Africa

ID 611       Development of Green Supply Chain Management in Food Industry

Aldeehani, S.Sulaiman, F.A. Aziz, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, UPM Serdang Selangor, Malaysia
Mustapha, Department of Aerosapace, Faculty of Engineering, Universiti Putra Malaysia, Serdang, Selangor Darul Ehsan, 43400 Malaysia

ID 612       Towards Sustainable Society: Design of Food Waste Recycling Machine

Shada Bennbaia, Aseel Wazwaz, Alaa Mohammed, Qatar University, Enas Abu Aker, Farah Al-Marridi, Mariam Mohammad, Qatar Universty, Farayi Musharavati and Galal Abdella, Qatar University, Qatar

ID 613       A GA based lambda error assessment for yearly stock forecast: A manufacturing case study.

Maricar Navarro and Bryan Navarro, Technological Institute of the Philippines

ID 615       Minimizing Response Time in Medical Emergency Service: A Literature Review

Muhammad Isnaini Hadiyul Umam, Budi Santosa and Nurhadi Siswanto, Industrial Engineering Department, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

ID 616      Meta-Heuristic Method for Solving Bulk Oil Product Logistic in Inventory Routing Problem: Partial Comparison Optimization

Antono Adhi, Santosa Budi and Nurhadi Siswanto, Industrial Engineering, Institut Teknologi Sepuluh Nopembe, Surabaya, Indonesia

ID 617  Sustainability and tourist satisfaction in Bromo Mountain, Indonesia

Rangga Restu Prayogo, Nurul Azizah and Sonja Andarini, Department of Business Adminsitration, University of  Pembangunan Nasional “Veteran”, East Java, Indonesia

ID 618    Using Importance-Performance Analysis for Water and Sewerage Companies Services

Abrari Salleh, Universiti Teknologi Malaysia, Suruhanjaya Perkhidmatan Air Negara Malaysia
Sha’ri Mohd Yusof and Norazli Othman, Razak School of UTM in Engineering and Advanced Technology, Universiti Teknologi Malaysia

ID 619    Hierarchies Consistency Analysis for Quality Performance Assessment: A study of the criterion weights

Mehran Doulat-Abadi and Hajime Ushimaru, School of Business Administration, Meiji University, Tokyo, Japan
Azizah Yusof, Department of Educational Technology and Creative Multimedia, Universiti Teknologi Malaysia, Johor Bahru, Johor, Malaysia

ID 621    The Impact of Supplier Development Practices of Retailers and Buyer Supplier Relationship on the Performance of Suppliers in the Clothing Industry in Sri Lanka

L. M. De Silva, Department of Operations Management, Faculty of Management, University of Peradeniya, Sri Lanka
G. A. Jayarathne, Dept. of Marketing Management, Faculty of Management Studies and Commerce, University of Sri Jayewardenepura, Sri Lanka

ID 622    Framework towards Successful Factors of Business Incubator for Indonesian Public Universities

Lina Gozali, Tarumanagara University, Indonesia
Maslin Masrom, Teuku Yuri M. Zagloel and Habibah @ Norehan Haron, Universiti Teknologi Malaysia

ID 623    The Influence of Culture, Job Satisfaction and Motivation on the Performance of Lecturers/Emp 

Linda Theresia, A. H. Lahuddin and Gadih Ranti, Industrial Engineering Department, Institut Teknologi Indonesia
Ramon Bangun, Faculty of Administrative Science, Universitas Indonesia

ID 625    Study to Design and Develop an Entrepreneur Model: Perspectives from Tannery Industry in Oman

Ahm Shamsuzzoha, Mohammad Khadem and Sujan Piya, Dept. of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman

ID 626    Evaluation Design and Build Contract System in Mixed Used Building Project Based On Standard Contract Management Body of Knowledge    

Evelyn Monica Thamrin and Yusuf Latief, Civil Engineering Department, University of Indonesia

ID 628    The Integrated Academic Information System Support for Education 3.0 in Higher Education Institution: Industry’s Perspective 

Abdul Talib Bon, Department of Production and Operations Management, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor 86400, Malaysia
Hadi Prasetyo Utomo and Mokhamad Hendayun, Dept. of Informatics, Faculty of Engineering, University of Langlangbuana, Bandung, Indonesia

ID 629    Physician Engagement: A Key to Purchasing Excellence in Healthcare Supply Chains

Shijith Kumar P M, IE Business School, Madrid and Amrita School of Business, Bangalore, India
Maria Sabastin S., Aksharaa S and Alisha Mohan, Department of Management, Amrita Vishwa Vidyapeetham, Bengaluru, Karnataka, India

ID 630    Efficiency of Radiology services: A Case study in Karnataka, India

Maria Sabastin S., Shekar Babu, and Robin Mathew John, Department of Management, Amrita Vishwa Vidyapeetham, Bengaluru, Karnataka, India

ID 631    Development of Risk-Based Standardized WBS (Work Breakdown Structure) for Quality Planning of Road Construction Project

Rahmanita Ayu Amini and Yusuf Latief, Department of Civil Engineering, Universitas Indonesia, Jakarta, Indonesia

ID 632    Affective Aspect Analysis on Online Games from User’s Point of View Using Kansei Engineering 

Heru Prastawa, Novie Susanto and Octavia Gultom, Industrial Engineering Department, Diponegoro University, Indonesia

ID 633    Fatigue and Human Errors Analysis in Petrochemical and Oil and Gas Plant’s Operation

Made Mariana, Taufik Roni Sahroni and Talitha Gustiyana, Industrial Engineering Department, Binus Graduate Program, Bina Nusantara University, Jakarta, Indonesia

ID 634    Developing Performance Measurement System of Management Maintenance in Government Building  

Epo Ilham Ajiprasetyo and Yusuf Latief, Faculty of Engineering, Universitas Indonesia, Kampus Baru UI Depok, Jawa Barat, Indonesia

ID 635    Work Posture Analysis Based on Rapid Upper Limb Assessment (RULA) for Operator Cellroom Electrolyser

Mohammad Aminuddin, Taufik Roni Sahroni, Nasuto Smaz and Jeffri Yudistira, Industrial Engineering Department, Binus Graduate Program
Bina Nusantara University, Jl KH Syahdan 9, Jakarta 11480, Indonesia

ID 636    Design Analysis of an Ergonomic Handgrip Facility for Transjakarta

Iccha Indriyani and Taufik Roni Sahroni, Industrial Engineering Department, Binus Graduate Program, Bina Nusantara University, Jakarta, Indonesia

ID 637    Connectivity of Medium Airports in Thailand 

Charukit Chaiwan, Graduate Program in Logistics Engineering and Supply Chain Management, Industrial Engineering Department, Faculty of Engineering, Chiang Mai University, Chiang Mai, 50200, Thailand
Korrakot Yaibuathet Tippayawong, Excellence Center in Logistics and Supply Chain Management, Industrial Engineering Department, Faculty of Engineering, Chiang Mai University, Chiang Mai, 50200, Thailand

ID 639    Reconfiguration of replenishment process of resuscitation unit of a public hospital in Morocco

Ibn El Farouk Imane, Laboratoire d’Etudes et de Recherches en Sciences Economiques et de Management, LERSEM, Universite Chouaib Doukalli Encg, El Jadida, Morocco
JAWAB Fouad, Laboratoire de recherches en Management International Techniques de Décisions et Logistique, (Midlog) Est Universite Sidi Mohamed Ben Abdellah, Fes/ Morocco
ARIF Jabir, Equipe de recherche Modélisation et optimisation des systèmes industriels et logistique, Ecole Nationale des Sciences Appliquées, Université Abdelmalek Essaâdi, Tétaoun, Morocco

ID 640    Solution of Differential Equations on Economic Growth of Solow Model

Alit Kartiwa, Sukono, Betty Subartini, Dept. of Mathemeticcs, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Johor, Malaysia

ID 642    Development of Quality Management System in the Process Planning Risk-Based in Government Building

Riany Aldesty and Yusuf Latief, Civil Engineering Department, Faculty of Engineering, University of Indonesia, Jakarta, Indonesia

ID 643    Development of Standard Operating Procedures of Reserve Goods Inventory on Risk Basis for Maintenance and Repair Activity in Government Building

Sindi Ajeng Hadiyanti and Yusuf Latief, Department of Civil Engineering, University of Indonesia, Depok, Indonesia

ID 644    Development of Risk-Based Standardized WBS (Work Breakdown Structure) for Quality Planning of Flyover Works

Made Widhi Adnyana Surya Pratita and Yusuf Latif, Civil Engineering Department, University of Indonesia, Salemba, Jakarta, Indonesia

ID 645    Net Premium Estimation by using Forward Selection Linear Model for Motor Vehicle Insurance 

Riaman, Sukono, Dwi Susanti and Ellen Marbun, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Johor, Malaysia

ID 646    Application of Product-Limit and Nelson-Aalen Methods in Health Insurance for Estimating Mean and Variance of Infected Duration of Dengue Fiver

Sukono, Dwi Susanti, Alit Kartiwa, Rani Q. F., Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Yuyun Hidayat, Department of Statistitics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Johor, Malaysia

ID 647    Estimation of Conditional Value-at-Risk under Assets Liability Model with Non Constant Volatility

Sukono, Alit Kartiwa and Betty Subartini, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Yuyun Hidayat, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Johor, Malaysia

ID 648    Branch and Bound Algorithm for Finding the Maximum Clique Problem   

Mochamad Suyudi, and Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Mustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Tembila Campus, 2200 Besut, Terengganu, Malaysia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Johor, Malaysia

ID 649    Product Quality Analysis RS CD 10 SY-C9 Using Multivariate Statistical Process Control

Yuyun Hidayat, Titi Purwandari and Sofyan Abdurahman, Departement of Statistics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Sukono, Departement of Mathematics Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Johor, Malaysia

ID 650    Optimization of Urea Solution Tie-in System in the Urea Fertilizer Manufacturing

Muhamad Fariz Failaka and Ali Elkamel, Department of Chemical Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada

ID 651    The Impact of Fleet Size on Remanufactured Product with Usage-based Maintenance Contract 

Husniah, Department of Industrial Engineering, LanglangbuanaUniversity, Karapitan 116, Bandung, 40261, Indonesia
Cakravastia and B. P. Iskandar, Department of Industrial Engineering, Bandung Institute of Technology, Ganesha 10, Bandung, 40132, Indonesia

ID 652    Characterization of Geotextile Material for Downhole Application

Noor Ilyana Ismail, Aruvin Prakasan, Angga Pratama Herman and M Luqman Hasan, Petroleum Engineering Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 32610, Perak, Malaysia
Nasiman Sapari, Civil Engineering Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 32610, Perak, Malaysia

ID 653    The Impact of Sand Particle Size and Velocity on Sand Erosion of Stainless Steel Plate using Sand Blasting Technique

Angga Pratama Herman, Noor Ilyana Ismail and Muhammad Asnawi Vaea, Petroleum Engineering Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 32610, Perak, Malaysia

ID 654    Design of Hybrid Solar Tobacco Curing System for Small Scale Farmers in Zimbabwe    

Charles Mbohwa, University of Johannesburg, Department of Quality Management and Operations Management, Auckland Park 2006, South Africa

ID 655    Turning Industrial Area into an Eco –Industrial Park in South Africa: Case Study

Ignatio Madanhire, University of Zimbabwe, Department of Mechanical Engineering, P.O Box MP167, Mt Pleasant, Harare, Zimbabwe
Peter Muganyi and Charles Mbohwa, University of Johannesburg, Department of Quality Management and Operations Management, South Africa

ID 656    Project Management versus Operations Management: A Comparative Study

Ahmed Osman  and Nasr Al Hinai, Mechanical and Industrial Engineering Department, Sultan Qaboos University, Muscat, Oman

ID 657    Using 7 Waste Approach and VSM Method to Improve the Efficiency of Mackerel Fish Crackers Production Time at Small Medium Enterprise (SME)

Muhammad Kholil, Industrial Engineering Department, Faculty of Engineering,  Universitas Mercu Buana, Jakarta Barat, indonesia
Hendri, Industrial Engineering Department, Faculty of Engineering, Universitas Mercu Buana, Jakarta Barat, Indonesia
Richard Setiawan, Industrial Engineering Department, Faculty of Engineering, Universitas Mercu Buana, Jakarta Barat, Indonesia

ID 658    Integrated Supply Chain Risk Management in Ready Mix Batching Plant

Anggriani Profita and Puspita Mahardhika Ramadhania, Industrial Engineering DepT. Mulawarman University, Samarinda, East Kalimantan, Indonesia
Wiwin Widiasih, Industrial Engineering Department, 17 Agustus 1945 University, Surabaya, East Java 60118, Indonesia

ID 659    Risk Management in Sand Mining Enterprise Using Fuzzy Failure Mode and Effect Analysis (Fuzzy FMEA)

Deasy Kartika Rahayu, Industrial Engineering Department, Faculty of Engineering, Mulawarman University, Samarinda, East Borneo, Indonesia
Anggriani Profita and Ichy Diny Editiya, Industrial Engineering Department, Faculty of Engineering, Mulawarman University, Samarinda, East Borneo, Indonesia

ID 660    Coffee Shop Engineering: An Industrial Engineering Perspective

Jaber Al-Jabri, Mazen Al-Abri and Majid Al-oufi, Sultan Qaboos University, Oman

ID 661    A GIS-Based Decision Making Approach on the Evaluation of Sustainable Business Location for Purpose-Built Offices in Malaysia    

Edie Ezwan Mohd Safian, Heng Jia Yun, Burhaida Burhan, Mohd Lizam Mohd Diah and Mat Tawi Yaacob, Department of Real Estate Management Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia
Abdul Hadi Nawawi, Department of Estate Management, Faculty of Architecture, Planning and Surveying, Universiti Teknologi MARA, Malaysia

ID 663    Developing a Decision Support System for University/ College Selection Problem for Kuwait

Dana Abbas, Mariam Al-Ajmy, Marwa Ashknani, Fatema Bujaber, Maryam Khajah and Suat Kasap, Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East- AUM, Egaila, Kuwait

ID 664    Simulation of Patient Flow and Healthcare Resources in a Hospital

Afnan Hamadah, Lina Handa, Nourhan Hasan, Samar Qutom, Yasmeen Sheebeeb and Ufuk Kula, Industrial Engineering Department, American University of Middle East, Kuwait

ID 665    How Can Large Collectives Solve Problems Using the Internet? (Breaking down Creative Tasks into Modular Crowdsourcing Tasks)

Mahir Pradana and Tri Indra Wijaksana, Department of Business Administration, Telkom University, Bandung, Indonesia

ID 666    Quality Improvement in Plastic Injection Molding Industry using Lean Six Sigma

Alaa Alshammari, Sahar Redha, Shahad Hussain, Tuleen Nazzal, Zahraa Kamal, and Walid Smew, Industrial Engineering Department, American University of the Middle East (AUM), Eqaila, Kuwait

ID 668    Benchmarking Study for Sustainable Oil and Gas Offshore Platform Decommissioning In Indonesia

Sari Amelia, Yusuf Latief, and Iwan Renadi Soedigdo, Department of Civil Engineering, University of Indonesia, West Java, Indonesia

ID 669 Enhancing the Carriers Synergy in the Full-Truck Transportation Industry

Chefi Triki, Mechanical and Industrial Engineering Department, Sultan Qaboos University, Muscat, Oman

ID 670    Towards A Conceptual Framework for Service-Learning in Online Learning Environment

Azizah Yusof, Noor Azean Atan and Jamaluddin Harun, Department of Educational Sciences, Mathematics and Creative Multimedia, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia
Mehran Doulatabadi, Centre for Organizational Excellence Research (COER), Massey University, Palmerston North 4442, New Zealand

ID 673    Procurement Strategy and Supply Risk Analysis of Coal by Considering Price Fluctuation and Supplier Delivery Time

Arie Bagus Wibowo and I Nyoman Pujawan, Industrial Engineering Study Program, Sepuluh Nopember Institute of Technology, Surabaya, Indonesia

ID 674     Reliability Modelling Through Deterioration Prone Components

Peter Muganyi and Charles Mbohwa, University of Johannesburg
Johannesburg, South Africa
Ignatio Madanhire, University of Zimbabwe, Harare, Zimbabwe

ID 675      Warranting Physical Assets Reliability through Criticality Optimization

Peter Muganyi and Charles Mbohwa, University of Johannesburg
Johannesburg, South Africa
Ignatio Madanhire, University of Zimbabwe, Harare, Zimbabwe

ID 676      Operational Environment Considerations for Reliability

Peter Muganyi and Charles Mbohwa, University of Johannesburg
Johannesburg, South Africa
Ignatio Madanhire, University of Zimbabwe, Harare, Zimbabwe

ID 677      Design-Out Maintenance as a Crucial Maintenance Facet

Peter Muganyi and Charles Mbohwa, University of Johannesburg
Johannesburg, South Africa
Ignatio Madanhire, University of Zimbabwe, Harare, Zimbabwe

ID 678    Improvement for Printing Process Using Integration of FMEA-TRIZ

Sherva Rafsanjani, Moses Laksono Singgih and Yudha Prasetyawan, Industrial Engineering Department, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

ID 679    Development of Sustainable Urban Water Management (Suwm) Index in Surabaya City for Development City

Puspa Dewi KKSP and Maria Anityasari, Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember Surabaya, 60111, Indonesia

ID 680    Supplier Selection using Analytical Hierarchy Process for Dairy Industry in Indonesia 

Dewanti Anggrahini, Imam Baihaqi and Putri Candra Anggani, Institut Teknologi Sepuluh Nopember Surabaya, Indonesia

ID 681    Methods to mitigate supply chain risks related to freeze-dried fruit importation to South Africa

Kyra Styles, Joanne Keyser, Ashleigh Bosman and Sebonkile Thaba, Department of Transport and Supply Chain Management, University of Johannesburg, Johannesburg, South Africa

ID 683    The fight against HIV/AIDS IN Zimbabwe: A comparative study with South Africa   

Tatenda Talent Chingono, University of Johannesburg, South Africa

ID 684    South African Humanitarian logistics aspects of emergency preparedness against Natural Disasters    

T Chingono and C Mbohwa, University of Johannesburg, South Africa

ID 685    Xenophobia in South Africa and its relation to Humanitarian Logistics    

T Chingono and C Mbohwa, University of Johannesburg, South Africa

ID 687    Relationship between Safety Climate Factors and Safety Performance in Chemical Industries

Shalini Tayaparan, Jafri Mohd Rohani, Khidzir Zakaria, Fatin Amrina A Rashid and Mohd Izuddin M Ithnan, Department of Materials, Manufacturing & Industrial Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 Skudai, Johor Bahru, Malaysia

ID 688    Effects of Inlet Flow Rate and Penstock’s Geometry on the Performance of Gravitational Water Vortex Power Plant

Md. Mizanur Rahman, Tan Jian Hong and Fadzlita Mohd. Tamiri, Faculty of Engineering, Universiti Malaysia Sabah, Kota Kinabalu, Sabah, Malaysia

ID 690    A Comparative Study of Physical and Mechanical Properties of Wood Plastic Composite Produced from Different Agriculture Residues 

Noor Afifah Ariffin, Nurain Nabila Haslizam, Saidatul Asyilah Samsurrijal, Mohamad Ali Selimin, Norpadzlihatun Manap, and Lee Te Chuan, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia (UTHM), Parit Raja 86400, Batu Pahat, Johor, Malaysia
Hasan Zuhudi Abdullah, Maizlinda Izwana Idris, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia (UTHM), Parit Raja 86400, Batu Pahat, Johor, Malaysia

ID 691    Stylish Coffee Table Influence by Modular Concept for Student Center  

Muhammad Fikri Bin Harun, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Malaysia
Juliana Abdul Halip Furniture Design and Manufacturing Department Universiti Tun Hussein Onn Malaysia Parit Raja, 86400 Batu Pahat, Malaysia

ID 692    Conceptual Design of Modern Minimalist Dining Table Inspired by British Military Uniform       

Nur Afiqah Mohd Ramli, Mohamad Ali Selimin, Abdullah Al Rashid Ab Hamid, Abdul Talib Bon, Wan Nuraini Rahim, and Juliana Abdul Halip, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia, Parit Raja, 86400 Batu Pahat, Johor, Malaysia

ID 693    The Effectiveness of Conveyor Layout affected Production Output using Arena Simulation Software

Ahmad Nur Aizat Ahmad, Nor Alia Fatin, Md Fauzi Ahmad, Raziff Buyong, Department of Production and Operation,Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia (UTHM), Parit Raja, Batu Pahat, Johor, Malaysia
Fazeeda Binti Mohamad, Faculty of Industrial Management, Universiti Malaysia Pahang, Malaysia
Adnan Bakri, Facilities Maintenance Engineering Department, Universiti Kuala Lumpur –Malaysian Institute of Industrial Technology, Malaysia
MustaqqimAbdul Rahim, Department of Civil Engineering, School of Environmental Engineering, Universiti Malaysia Perlis (UniMAP), Malaysia

ID 694    Application of Queuing Theory Model and Simulation to Patient Flow at the Outpatient Department

A.H. Nor Aziati and Nur Salsabilah Binti Hamdan, Department of Production and Operation, Faculty of Technology, Management and Business, University Tun Hussein Onn Malaysia (UTHM), Parit Raja, Batu Pahat, Johor, Malaysia

ID 695    Continuous Improvement Behaviours in Malaysian Manufacturing Companies      

Affandi Mohd-Zainal and Sabariah Sulaiman, Department of Materials, Manufacturing & Industrial Engineering, Faculty of Mechanical Engineering,Universiti Teknologi Malaysia, 81310 Skudai, Johor Bahru, Malaysia
Shari Mohd Yusof, Razak School of Engineering and Advanced Technology, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia
Jane Goodyer, School of Engineering and Advanced Technology, Massey University, Palmerston North, New Zealand

ID 696      Assessment of the Willingness to Adopt and Benefits of Adopting Light Gauge Steel (LGS) for Construction Projects

Oluwaseun S Dosumu, Clinton Aigbavboa, Wellington Thwala and Unathi Mboya, Sustainable Human Settlement and Construction Research Centre, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa

ID 697    Material Procurement Model Considering Life Time and Minimum Order Quantity   

Dadang Arifin and Cantri Charisma, Industrial Engineering Department of Universitas Jenderal Achmad Yani, Indonesia

ID 698    Soft Innovation Strategy as a Booster in the Creative Industry (Survey at Bandung as Creative City in Indonesia)

Eriana Astuty, Business and Management Faculty, Universitas Widyatama, Jalan Cikutra 204 A, Bandung
Agus Rahayu, Disman and Lili Adi Wibowo, Doctoral Program of Management, Universitas Pendidikan Indonesia, Jalan Setiabudhi 229, Bandung

ID 699    Building a Safety Culture in the Construction Sector: A Model to Assess the Safety Maturity of a Company

Johan Santoso, Yusuf Latief and Rossy Armyn Machfudiyanto, Department of Civil Engineering, Universitas Indonesia, Depok, Indonesia

ID 701    Use of Social Media as a medium for disclosing Corporate Social Responsibility (CSR) Disclosures in India

Mr. Giftson and Shekar Babu, Department of Management, Amrita Vishwa Vidyapeetham University, Bangalore, India

ID 702    Social Media and Luxury Fashion in India: Use of Social Media by Brands

Arunima Kailthya and Shekar Babu, Department of Management, Amrita Vishwa Vidyapeetham University, Bangalore, 560035, India

ID 703    Corporate Social Responsibility (CSR) Disclosures using Social Media in India

Ms. Anjana, Mr. Arun V, Mr. Manjunath Eswar and Shekar Babu, Dept. of Management, Amrita Vishwa Vidyapeetham University, Bangalore, India

ID 704    Use of Social Media for CSR and Sustainability: A Systematic Review of Literature

Amrit Perish and Shekar Babu, Department of Management, Amrita Vishwa Vidyapeetham University, Bangalore, India

ID 705    Corporate Social Responsibility (CSR) and Financial Performance: A Study of Indian Companies

Harsha Vinay and Shekar Babu, Department of Management, Amrita Vishwa Vidyapeetham University, Bangalore, India

ID 707    A Cold-inflow Free Solar Chimney Dryer for Seaweed Drying in Sabah, Malaysia

Md. Mizanur Rahman, Energy Research Group, Materials and Minerals Research Unit, Faculty of Engineering, Universiti Malaysia Sabah
Hooi Kim Phang, Chi Ming Chu and Sivakumar Kumaresan, Thermal and Environmental Research Group, Materials and Minerals Research Unit,Faculty of Engineering, Universiti Malaysia Sabah
Suhaimi Md. Yasir, Seaweed Research Unit, Faculty of Science and Natural Resources, Universiti Malaysia Sabah

ID 708    Assessment Project Management (PM) Roles Responsible for Abandonment of Construction Projects

Oluwaseun S. DOSUMU and Clinton, AIGBAVBOA, Sustainable Human Settlement and Construction Research Centre, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa

ID 709    Procurement Related Risks in the Gauteng Public Sector 

Cynthia Ziqubu, Nelisiwe Dlamini and Sebonkile Thaba, Department of Transport and Supply Chain Management, College of Business and Economics,University of Johannesburg, Johannesburg, South Africa

ID 710    Self-Assessment and Quality Awards Models: A review of practice and process   

Mehran Doulatabadi, Centre for Organisational Excellence Research (COER), Massey University, Palmerston North 4442, New Zealand
Azizah Yusof, Department of Educational Sciences, Mathematics and Creative Multimedia, Universiti Teknologi Malaysia, Johor Bahru, Malaysia

ID 711    Measuring the Value Added and Business Strategy:  A Case of Property Corporations in Indonesia Stock Exchange

Katharina Priyatiningsih, H. Suryana, Agus Rahayu and Lili Adi Wibowo, Indonesia University of Education, Bandung, Indonesia

ID 713    Building Student Satisfaction at Private Higher Education through Co-creation with Experience Value as Intervening Variables

Muji Gunarto, Department of Management, Universitas Bina Darma, Palembang, INDONESIA
Ratih Hurriyati, Disman and Lili Adi Wibowo, Department of Management, Universitas Pendidikan Indonesia, Bandung, 40154, INDONESIA
Diah Natalisa, Department of Management, Universitas Sriwijaya, Palembang, 30662, INDONESIA

ID 714    The Influence of Distinctive Capabilities and Innovation Management on Business Performance of Technology Information Digital Industry In Indonesia

Judi Achmadi, Department of Management, Universitas Pendidikan Indonesia, Palembang, Indonesia
Agus Rahayu, Eeng Ahman and Lili Adi Wibowo, Department of Management, Universitas Pendidikan Indonesia, Bandung, 40154, Indonesia

ID 715    The Relationship between the ‘Big Five’ Personality and Career Success

Norliyana Zakaria and Halimah Mohd Yusof, Faculty of Management, University of Technology Malaysia, Johor Bahru, Malaysia

ID 716    Shopping Centre Classification Scheme: A Comparison of International Case Studies

Ihfasuziella Ibrahim, Abdul Talib Bon, Abdul Hadi Nawawi and Edie Ezwan Mohd Safian , Faculty of Architecture, Planning and Surveying, UiTM, 40450 Shah Alam, Malaysia, Faculty of Technology Management & Business, UTHM, 86400 Johor, Malaysia
Ihfasuziella Ibrahim, Architecture, Planning and Surveying Department, UiTM, Shah Alam, Malaysia

ID 717 Implementation of Lean in Excavator Bucket Manufacturing Industry
Santosh Gudagunti and Ahad Ali, A.Leon Linton Department of Mechanical Engineering, Lawrence Technological University, Southfield, MI 48075, USA

ID 718 Implementation of Production Planning Tools in Sugar Industry
Santosh Gudagunti and Ahad Ali, A.Leon Linton Department of Mechanical Engineering, Lawrence Technological University, Southfield, MI 48075, USA

ID 719 Budget Airline Operations Optimization using Linear Programming
Pankil Patel and Ahad Ali, A.Leon Linton Department of Mechanical Engineering, Lawrence Technological University, Southfield, MI 48075, USA

ID 728 Optimization of Distribution Channel Vehicle Routing Problem with Time Windows using Differential Evolution Algorithm: A Case Study in Newspaper Industry
Iqbal Wahyu Saputra, Muhammad Hisjam and Wahyudi Sutopo, Department of Industrial Engineering, Faculty of Engineering, Universitas Sebelas Maret, Surakarta 57126, Indonesia

© IEOM Society International - 2017 IEOM 2018 - Web Design by Suvro Sudip