Proceedings – 3rd European IEOM Pilsen (Czech Republican) Conference
ISSN: 2169-8767 ISBN: 978-1-5323-5949-1
ID 4 Improving Forecasting Accuracy to reduce Variability of Customer Service Level
Bernardo Villarreal, Universidad de Monterrey, San Pedro Garza García, México.
Mónica Balderas, Universidad de Monterrey, San Pedro Garza García, México.
Andrea Araiza, Universidad de Monterrey, San Pedro Garza García, México.
Mariana Pena, Universidad de Monterrey, San Pedro Garza García, México.
ID 6 Resource Recovery from Paper Mill Sludge through Vermicomposting
Mercy Manyuchi, University of Johannesburg, Johannesburg, South Africa.
Mbohwa, University of Johannesburg, Johannesburg, South Africa.
Muzenda, University of Johannesburg, Johannesburg, South Africa.
Botswana, University of Johannesburg, Johannesburg, South Africa.
Stinner, German Biomass Research Institute, Leipzig, Germany.
ID 7 Increase Plant Productivity Using an OEE Approach: An Application
Mariana Molina-Barrientos, Universidad De Monterrey, San Pedro Garza Garcia, Mexico.
Teresa Verduzco, Universidad De Monterrey, San Pedro Garza Garcia, Mexico.
Bernardo Villarreal, Universidad De Monterrey, San Pedro Garza Garcia, Mexico.
ID 8 A Sustainable Supply Chain of a Coal Power Plant
Asmaa El Bouri Camel, Faculty of Sciences & Techniques of Marrakesh Safi, Morocco.
Khalid Benhida, Department of Instrumental Techniques and Quality Control, EST of Safi, Cadi Ayyad University, Safi, Morocco
Said El Fezazi, Department of Instrumental Techniques and Quality Control, EST of Safi, Cadi Ayyad University, Safi, Morocco
ID 17 Practical Techniques for Selecting the Best Strategy
Hakan Butuner, IMECO Industrial Management & Engineering Co., Istanbul turkey, Turkey.
ID 18 Adoption of Eco cook stoves as a Way of Improving Energy Efficiency
Mercy Manyuchi, University of Johannesburg, Johannesburg, South Africa.
Mbohwa, University of Johannesburg, Johannesburg, South Africa.
Muzenda, University of Johannesburg, Johannesburg, South Africa.
Muzenda, University of Johannesburg, Johannesburg, South Africa.
Mpeta,Department of Environmental Engineering, School of Engneering, Chinhoyi University of Technology, Zimbabwe
ID 19 Potential to Produce Biomass Briquettes from Brewery Waste
Mercy Manyuchi, University of Johannesburg, Johannesburg, South Africa.
Mbohwa, University of Johannesburg, Johannesburg, South Africa.
Muzenda, University of Johannesburg, Johannesburg, South Africa.
Muzenda, University of Johannesburg, Johannesburg, South Africa.
Mpeta,Department of Environmental Engineering, School of Engneering, Chinhoyi University of Technology, Zimbabwe
ID 20 A Model For Sustainable Operations Management Implement Ion In South Africa: A Cross Sectional Survey.
Eric Amankwa, University of Johannesburg, Oakland park, Gaunteng, South Africa.
ID 23 Ergonomic Intervention Improves in Productivity, Health and Safety of Unorganized Sectors at India
Tirthankar Ghosh, Sri Sri University, cuttack, Odisha, India.
ID 24 Impact of Occupational Health and Safety Strategies on Reducing Construction Site Accidents
Laila Khodeir, Assoc. Prof. Department of Architecture Engineering, Ain Shams University/ British University in Egypt, Cairo, Egypt
Youhansen Salahel Dine, Master Student, Department of Architecture Engineering, Ain Shams University, Cairo, Egypt
ID 32 Design of an Automated Vegetable Cutter and Slicer
Tawanda Mushiri, University of Zimbabwe Harare, Harare, Zimbabwe.
Guide S Ganyani, University of Zimbabwe Harare, Harare, Zimbabwe.
ID 33 Industrialisation and its Impact on Operations Management Development: A Guess into the forth Industrial Revolution.
Eric Amankwa, University of Johannesburg, Gaunteng, South Africa.
ID 49 Caldwell-t Algorithm Validation: Alternative proposal to the solution of Gupta for the sequencing of activities in processes of slender development of software
Eldon Caldwell, University of Costa Rica, San Jose, Costa Rica.
ID 50 On Board Unit for Electronic Toll Collection in Supporting Make Indonesia 4.0
Hwi-Chie Ho, Bina Nusantara University, Tangerang, Banten, Indonesia.
Laili Latifa, Bina Nusantara University, Tangerang, Banten, Indonesia.
Claudia Clarice, Bina Nusantara University, Tangerang, Banten, Indonesia.
Arvin Raditya, Bina Nusantara University, Tangerang, Banten, Indonesia.
ID 52 Cyber-security Policy Framework and Procedural Compliance in Public Organisations
Dr. Edison Wazoel Lubua, North-West University, Vaal Campus, South Africa.
Prof. Philip D Pretorius, North-West University, Vaal Campus, South Africa.
ID 53 Abnormal Behavior Detection and Analysis for Maintenance Outsourcing Cases
Yiyo Kuo, Ming Chi University of Technology New Taipei City, Taiwan.
Ssu-Han Chen, Ming Chi University of Technology New Taipei City, Taiwan.
Jin-Kwan Lin, Ming Chi University of Technology New Taipei City, Taiwan.
ID 54 Supplier Evaluation and Segmentation in Cheese Company Using Best-Worst Method and TOPSIS
Muhammad Dachyar, Universitas Indonesia, Indonesia.
Aulia Karima Maharani, Universitas Indonesia, Indonesia.
ID 55 Design On Improvement of Distribution Process in Logistic Service Provider Companies Using Business Process Reengineering Approach
Muhammad Dachyar, Universitas Indonesia, Indonesia.
Gabriella Septiani Miranda, Universitas Indonesia, Indonesia.
ID 56 Factors Influencing Product Quality in Milk Processing Industry
Muhammad Dachyar, Universitas Indonesia, Indonesia.
Galuh Paramitha Rachmadhani, Universitas Indonesia, Indonesia.
ID 57 Designing Model of Spare Parts Supplier Selection in Power Plants Using AHP-PROMETHEE Method
Muhammad Dachyar, Universitas Indonesia, Indonesia.
Gilbertha Ayu Sijabat, Universitas Indonesia, Indonesia.
ID 58 Design of Unit Selection in Indonesian Hospital to Implement Internet of Things (IoT) Using DEMATEL-Based ANP and VIKORRUG Muhammad Dachyar, Universitas Indonesia, Indonesia.
Ulfa Azizia, Universitas Indonesia, Indonesia.
ID 59 Development of an Evaporative Cooler for Small Scale Agro Producers
Ignatio Madanhire, University of Zimbabwe, Department of Mechanical Engineering, Zimbabwe.
Clement Shonhiwa, University of Zimbabwe, Department of Mechanical Engineering, Zimbabwe.
Ngonidzashe Mhuka, University of Zimbabwe, Department of Mechanical Engineering, Zimbabwe.
Charles Mbohwa, University of Johannesburg, Johannesburg, South Africa.
ID 60 Development of E-Waste Inventory Management Strategy: Case Study
Ignatio Madanhire, University of Zimbabwe, Department of Mechanical Engineering, Zimbabwe.
Kumbi Mugwindiri, University of Zimbabwe, Department of Mechanical Engineering, Zimbabwe.
Charles Mbohwa, University of Johannesburg, Johannesburg, South Africa.
ID 61 Development of a Portable Motorized Car Jack
Ignatio Madanhire, University of Zimbabwe, Department of Mechanical Engineering, Zimbabwe.
Tapiwa Chatindo, University of Zimbabwe, Department of Mechanical Engineering, Zimbabwe.
Charles Mbohwa, University of Johannesburg, Johannesburg, South Africa.
ID 62 Computational Intelligence for Process Optimization in Casting Industry
Li-Fei Chen, Fu Jen Catholic University, New Taipei City, Taiwan
Chao-Ton Su, National Tsing Hua University, Taiwan.
Ya-Yu Dong, National Tsing Hua University, Taiwan.
ID 64 Determining The Benefits Of The Engineering Mentoring Programmes For Graduates
Ozofu Akerele, University of Johannesburg, Gauteng, South Africa.
Andre Vermeulen, University of Johannesburg, Gauteng, South Africa.
Annlizé Marnewick, University of Johannesburg, Gauteng, South Africa.
ID 65 The Efficient and Precision Nature Within The Cyber Physical Systems (CPS) And Industry 4.0 Technologies In Industry Operations
Albert J. Viljoen, University of Johannesburg, Gauteng, South Africa.
Andre Vermeulen, University of Johannesburg, Gauteng, South Africa.
Jan-Harm C. Pretorius, University of Johannesburg, Gauteng, South Africa.
ID 66 Internet Of Things Based Processes Improvement Of Indonesian Hospital
Egi Aulia Mahendra, Universitas Indonesia, Indonesia.
M. Dachyar, Universitas Indonesia, Indonesia.
Farizal, Universitas Indonesia, Indonesia.
ID 67 A Qualitative Review of the Contribution of Military Leadership to the Humanitarian Supply Chain Operations
Martin Paul Tynan, School of Economics, Finance and Management, University of Bristol, UK
Guru Prabhakar, Faculty of Business & Law, UWE, UK.
Tahir M Nisar, Southampton Business School, University of Southampton, UK.
ID 68 Application of Multilayer Perceptron Neural Network Model for Predicting Industrial Sector’s Energy Consumption
Oludolapo Olanrewaju, Durban University of Technology, Durban NA, South Africa.
ID 70 Fire Stations Manning and Business Planning Model: Case Study
Abdulaziz S Alzahrani, Organization Consulting Department, Saudi Aramco, Saudi Arabia.
Suhail N Shami, Organization Consulting Department, Saudi Aramco, Saudi Arabia.
Abdulelah T Alrifi, Organization Consulting Department, Saudi Aramco, Saudi Arabia.
ID 71 Relative Efficiency of International Airlines
Antonio Henriques de Araujo Junior, Rio de Janeiro State University, Industrial Engineering Department, Brazil
Nilo Antonio de Souza Sampaio, Rio de Janeiro State University, Mathematics, Physic and Computation Department, Brazil
Jose Glenio Medeiros de Barros, Rio de Janeiro State University, Industrial Engineering Department, Brazil
Bernardo Bastos da Fonseca, Rio de Janeiro State University, Industrial Engineering Department Department, Brazil
Maria da Gloria Diniz de Almeida, Rio de Janeiro State University, Industrial Engineering Department, Brazil
ID 72 Algorithm for Integrated Problem of Workforce Allocation and Parallel Machine Scheduling with Sequence-dependent Setup and Machine Eligibility Restrictions
Arajabhorn Chantavali, Department of Industrial Engineering, Kasetsart University, Bangkok, Thailand.
Anan Mungwattana, Department of Industrial Engineering, Kasetsart University, Bangkok, Thailand.
ID 73 The Impact of Risk Analysis in Project Cost Calculation
Konstantin Novikov, University of West Bohemia, Pilsen, Czech Republic
Jana Kleinova, University of West Bohemia, Pilsen, Czech Republic
ID 74 Exploring the Potential of New Technologies in Lean Shop- floors: Do Industry 4.0 Resources Really Matter?
Antonio Sartal, Universidade Nova de Lisboa, Portugal.
Josep Llach, Mechanical and Industrial Engineering Department, Girona.
ID 75 Organizational Tools and Cultural Change in the Success of Lean Transformations: Taking Stock and Looking ahead to Unravel the Right Sequence and Rhythm
Antonio Sartal, Universidade Nova de Lisboa, Portugal.
Xosé H. Vázquez, School of Economics and Business, Campus das Lagoas/Marcosende.
ID 81 A dynamic model for sustainable Lean Six Sigma implementation
Tshavhuyo Sesane, University of Johannesburg, South Africa.
Andre Vermeulen, University of Johannesburg, South Africa.
Jan-Harm C. Pretorius, University of Johannesburg, South Africa.
ID 82 The mediating roles of agility on the impacts of sustainability on the performance of the oil and gas supply chains
Dan’Asabe Godwin Geyi, Lancashire School of Business University of Central Lancashire Preston, United Kingdom
Yahaya Yusuf, Lancashire School of Business University of Central Lancashire Preston, United Kingdom
David Hanley, Lancashire School of Business University of Central Lancashire Preston, United Kingdom
ID 83 Extending the Quality Culture in the Digital Age
Milton Krivokuca and Associates Wilmington, North Carolina, United States.
ID 84 Modelling Interdependencies of Electrical Power Infrastructure by Using ISM-MICMAC Analysis
Hassan Al-Zarooni, University of Sharjah, United Arab Emirates.
Hamdi Bashir, University of Sharjah, United Arab Emirates.
ID 85 Implementation of Overall Equipment Effectiveness (OEE) in Garment Manufacturing Industry
Abher Rasheed, Department of Garment Manufacturing, National Textile University, Faisalabad, Pakistan
Muhammad Babar Ramzan, Department of Garment Manufacturing, National Textile University, Faisalabad, Pakistan
Ateeq ur Rehman, Department of Garment Manufacturing, National Textile University, Faisalabad, Pakistan
Muhammad Salman Naeem, Department of Garment Manufacturing, National Textile University, Faisalabad, Pakistan
ID 86 On some aspects of Dissimilar Welding of AISI 316L Austenitic Stainless Steel to AISI 409 Ferritic stainless steel Weldment under Varied Input Parameters In Metal Inert Gas Welding
Dr. Titas Nandi, Department of Mechanical Engineering Jadavpur University, India
Nabendu Ghosh, Department of Mechanical Engineering Jadavpur University, India
Dr. Pradip Kumar Pal, Department of Mechanical Engineering Jadavpur University, India
Dr. Goutam Nandi, Department of Mechanical Engineering Jadavpur University, India
ID 87 On some aspects of Dissimilar Welding of AISI 316L Austenitic Stainless Steel to AISI 409 Ferritic stainless steel Weldment under Varied Input Parameters In Metal Inert Gas Welding
Dr. Titas Nandi, Department of Mechanical Engineering Jadavpur University, India
Nabendu Ghosh, Department of Mechanical Engineering Jadavpur University, India
Dr. Pradip Kumar Pal, Department of Mechanical Engineering Jadavpur University, India
Dr. Goutam Nandi, Department of Mechanical Engineering Jadavpur University, India
ID 88 Pre-order Sales for Advance Selling with Capacity Constraint
Kwei-Long Huang, Institute of Industrial Engineering, National Taiwan University, Taiwan
Cheng-Tao Hsu, Institute of Industrial Engineering, National Taiwan University, Taiwan
ID 89 Worm Optimization Algorithm for the Euclidean Location-Allocation Problem
Jean-Paul Arnaout, Department of Business Administration, Gulf University for Science and Technology, West Mishref, Kuwait
ID 90 Project Portfolio Selection in Indian Auto Component Industry: An Empirical Study
Vilas J Kharat, National Institute of Industrial Engineering Mumbai, India
Dr. B K R Naik, National Institute of Industrial Engineering, Mumbai, India
ID 91 Self-Organizing Migrating Algorithm Applied to Discrete Event Simulation Optimization
Pavel Raska, University of West Bohemia, Pilsen, Czech Republic
Zdenek Ulrych, University of West Bohemia, Pilsen, Czech Republic
ID 92 Exponentially Weighted Moving Average Chart Employing Curtailed Inspection for Monitoring Attributes
Salah Haridy, University of Sharjah, United Arab Emirates, Benha Faculty of Engineering, Benha University, Benha, Egypt
Mohammad Shamsuzzaman, University of Sharjah, United Arab Emirates
Imad Alsyouf, University of Sharjah, United Arab Emirates
Ahmed Maged, Benha Faculty of Engineering, Benha University, Benha, Egypt
ID 93 Meta-analyses in Operations and Management Research: What can we learn from Medicine?
Antonio Sartal, Universidade Nova de Lisboa, Portugal
Miguel Gonzalez-Loureiro, School of Economics and Business, Campus das Lagoas/Marcosende
Xosé H. Vázquez, School of Economics and Business, Campus das Lagoas/Marcosende
ID 94 The Use of Internet of Things (IoT) Applications in the Logistics Outsourcing: Smart RFID Tag as an Example
Jabir Arif, Ecole Nationale des Sciences Appliquées (ENSA) Université Abdelmalek Essaâdi Tetouan, Morocco
Imane Ibn El Farouk, Universite Chouaib Doukalli Encg, El Jadida, Morocco
Youssef MOUZOUNA Université Hassan 1er Settat, Morocco
Fouad Jawab Université Sidi Mohamed Ben Abdellah Fez, Morocco
ID 95 Risk Assessment Model Proposal in Logistics Outsourcing process: Masse Market Retailing as a Case Study
Jabir Arif, Ecole Nationale des Sciences Appliquées (ENSA) Université Abdelmalek Essaâdi Tetouan, Morocco
Fouad Jawab Université Sidi Mohamed Ben Abdellah Fez, Morocco
ID 96 End to End Supply Chain with Kankan (Pull System) and Sequencing on Production Lines
Jabir Arif, Ecole Nationale des Sciences Appliquées (ENSA) Université Abdelmalek Essaâdi Tetouan, Morocco
Zakaria Tobi, Ecole Nationale des Sciences Appliquées (ENSA) Université Abdelmalek Essaâdi Tetouan, Morocco
ID 97 Mapping Sustainable Development onto Project Management Processes
Rana Musa, University of Sharjah, United Arab Emirates
Hamdi Bashir, University of Sharjah, United Arab Emirates
ID 98 Comparison of the Local Muscular Stress of Men and Women in the Industrial Sector
Martin Kába, University of West Bohemia Univerzitní, Pilsen, Czech Republic
Ilona Kačerová, University of West Bohemia Univerzitní, Pilsen, Czech Republic
ID 99 Project constraints in a manufacturing environment – beyond the Iron triangle
Moloko Masopoga, University of Johannesburg, South Africa
A Wessels, University of Johannesburg, South Africa
JHC Pretorius, University of Johannesburg, South Africa
ID 100 An Empirical Study of Risk Management in Project Portfolio: A case of Indian Auto Component Industry
Vilas J Kharat, National Institute of Industrial Engineering, Mumbai, India
Tejashree Bendale, Electronics Department, UMIT, Mumbai India
ID 101 Parametric Optimization of WEDM for Inconel 800 using Artificial Neural Network
Prasenjit Dutta, NIT Agartala, Jirania, Tripura, India.
Subhash Chandra Panja, Jadavpur University, Kolkata, India.
Pawan Kumar Research Student Department of Production Engineering, NIT Agartala, Jirania, Tripura, India.
Debashis Sarkar, Principal Asansol Engineering College, Asansol, India
ID 102 Effective X-bar&R Chart for Monitoring Aluminum Extrusion Process
Salah Haridy, University of Sharjah, Sharjah, United Arab Emirates.
Imad Alsyouf, University of Sharjah, Sharjah, United Arab Emirates.
Mohammad Shamsuzzaman, University of Sharjah, Sharjah, United Arab Emirates
Ahmed Maged, Benha Faculty of Engineering, Benha University, Benha, Egypt
ID 103 The Re-Formulation For Single Item Capacitated Lot Sizing Problem With Shortage, Inventory And With Strict Carbon Cap
Piya Ghosh, Indian Institute of Technology, Kanpur, India
RRK Sharma, Indian Institute of Technology, Kanpur, India
ID 104 Delay Analysis in Energy Utility Maintenance Project
Kibala Adiam, University of Johannesburg Johannesburg, South Africa
Hannelie Nel, University of Johannesburg Johannesburg, South Africa
ID 106 Organizational Culture and Performance: Mediating Role of Sustainable Supply Chain Management Practices
Yahaya Yusuf, University of Central Lancashire Preston, UK
Tanimu Dandutse, University of Central Lancashire Preston, UK
ID 107 Outsourcing Business Activities: A Decision Tree for Systematic Evaluation
Muhammad Ahmad Tauqeer, Department of Mechanical and Structural Engineering and Material Science, University of Stavanger, Norway
Knut Erik Bang, Department of Mechanical and Structural Engineering and Material Science, University of Stavanger, Norway
ID 108 Insights from Control Science for the Management of Technology
Tariq Samad, Technological Leadership Institute, University of Minnesota, U.S.A.
ID 118 Critical Success Factors for Improving Quality Culture in A Coal Testing Division
M.J Rasethe, Postgraduate School of Engineering Management, University of Johannesburg, South Africa
A Wessels, Postgraduate School of Engineering Management, University of Johannesburg, South Africa
JHC Pretorius, Postgraduate School of Engineering Management, University of Johannesburg, South Africa
ID 120 A Review Paper on Algorithms Used For Simple Assembly Line Balancing Problems in the Automotive Industry
Salah Eddine Ayoub El Ahmadi, National School Of Applied Sciences, Ibn Tofail University, Kenitra, Morocco
Laila El Abbadi, National School Of Applied Sciences, Ibn Tofail University, Kenitra, Morocco
Moulay Taib Belghiti, National School Of Applied Sciences, Ibn Tofail University, Kenitra, Morocco
ID 121 Supply Chain Delay in payment : review, classification and future research directions
Mohamed Hicham Salah Eddine, Research team AMIPS, Mohammed V University of Rabat, Morocco
Tarik Saikouk, International logistics and supply chain department, International University of Rabat
Abdelaziz Berrado, Research team AMIPS, Mohammed V University of Rabat, Morocco
ID 122 Understanding supply chain resilience: a dynamic approach using theory of constraints current reality tree
Mohamed Hicham Salah Eddine, Research team AMIPS, Mohammed V University of Rabat, Morocco
Tarik Saikouk, International logistics and supply chain department, International University of Rabat
Abdelaziz Berrado, Research team AMIPS, Mohammed V University of Rabat, Morocco
ID 123 The Impact of Payment delays on The Financial resilience of a Multi-echelon Supply Chain: a System Dynamics simulation Approach
Mohamed Hicham Salah Eddine, Research team AMIPS, Mohammed V University of Rabat, Morocco
Tarik Saikouk, International logistics and supply chain department, International University of Rabat
Abdelaziz Berrado, Research team AMIPS, Mohammed V University of Rabat, Morocco
ID 124 Production of Tailored Reinforcement of Rattan Fiber Composite
Flora Elvistia Firdaus, Dept. of Chemical Engineering, Jayabaya University, Indonesia
M. Dachyar, Dept. of Industrial Engineering, Universitas Indonesia, Indonesia
ID 125 Testing the Effect of Knowledge Management Capabilities on Service Quality
Ahmed M. Attia, OPIM Department, Effat University, Jeddah, KSA
Alaa M. Zibar, OPIM Department, Effat University, Jeddah, KSA
ID 126 Optimal Inventory Control Policies for Avoiding Food Waste
Dimitrios Vlachos, Department of Mechanical Engineering, Aristotle University of Thessaloniki, Greece
Ioannis Mallidis, Centre for Research and Technology Hellas, Hellenic Institute of Transport, Thessaloniki, Greece
Volha Yakavenka, Department of Mechanical Engineering, Aristotle University of Thessaloniki, Greece
ID 127 Assessment of Wind Farm Allocation Criteria
Mawadda M. Samkari and Abdulaziz T. Almaktoom, Department of Operations and Information Management, Effat University, Jeddah, Kingdom of Saudi Arabia
ID 129 Preparation of Collaborative Robot Implementation in the Czech Republic
Tomáš Broum, Department of Industrial Engineering and Management Faculty of Mechanical Engineering, University of West Bohemia Plzen, Czech Republic
Michal Šimon, Department of Industrial Engineering and Management Faculty of Mechanical Engineering, University of West Bohemia Plzen, Czech Republic
ID 130 ABC Analysis And Diminution Of Inventory Level Through Forecasting Technique In A Medium Scale Manufacturing Industry
Gautam Majumdar, Department of Mechanical Engineering, Jadavpur University, India
S. Nallusamy, Department of Mechanical Engineering, Dr. M G R Educational and Research Institute, Chennai, India
ID 131 A Scalable Approach for Vehicle Routing Problem with Reinforcement Learning
C.Y. Lo, Lee Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University Hong Kong, China.
C.K. M., Lee Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University Hong Kong, China
ID 132 Enhancement Of Overall Equipment Effectiveness Through Implementation Of Total Productive Maintenance
Rajat S Sen, Department of Mechanical Engineering, Jadavpur University, Kolkata, India
GautamMajumdar, Department of Mechanical Engineering, Jadavpur University, Kolkata, India
S. Nallusamy, Department of Mechanical Engineering, Dr. M G R Educational and Research Institute, Chennai, India
ID 133 Challenges facing projects due to a lack of resources
Bervesh Bhika, University of Johannesburg, Auckland Park, Johannesburg, Gauteng, South Africa.
Jan Harm C Pretorius, University of Johannesburg, Auckland Park, Johannesburg, Gauteng, South Africa.
ID 135 Historical Overview of Maintenance Management Strategies: Development from Breakdown Maintenance to Predictive Maintenance in Accordance with Four Industrial Revolutions
Peter Poór, , Department of Industrial Engineering and Management, University of West Bohemia, Czech Republic
David Ženíšek, , Department of Industrial Engineering and Management, University of West Bohemia, Czech Republic
Josef Basl, Department of Industrial Engineering and Management, University of West Bohemia, Czech Republic
ID 136 Steady State, Transient and Harmonic Behavior Analysis of Home Appliances
Abdul Sattar Larik, Department of Electrical Engineering, Mehran University of Engineering and Technology, Sindh, Pakistan
Mukhtiar Ahmed Mahar, Department of Electrical Engineering, Mehran University of Engineering and Technology, Sindh, Pakistan
ID 137 Business Process Modelling and Change of Organizational Structure
Viktória Hořánek, Department of Industrial Engineering and Management, University of West, Bohemia in Pilsen, Czech Republic
Jana Benešová, Department of Industrial Engineering and Management, University of West, Bohemia in Pilsen, Czech Republic
Michal Šimon, Department of Industrial Engineering and Management, University of West, Bohemia in Pilsen, Czech Republic
ID 138 Technology Management and Adoption for Different E-tailer Formats: A Conceptual Framework
Vinayak A. Drave, Department of Industrial and Management Engineering, Indian Institute of Technology, Kanpur, India
R.R.K. Sharma, HAG Scale Professor, Department of Industrial and Management Engineering, Indian Institute of Technology, Kanpur, India
Priyanka C Bhatt, Bennett University, Times of India Group, India
Dr. Sharif, Head S&P, Indian Institute of Technology, Kanpur, India
ID 139 Development of Vendor Management Inventory (VMI) Model for Single Vendor Single Retailor Using Imperialist Competitive Algorithm
Ferdous Sarwar, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh
Mahmudul Hasan Porag, Mechanical and Industrial Engineering Department, Ahsanullah University of Science and Technology, Dhaka, Bangladesh
ID 140 The Triple-Helix sub-revolution and the hype of Industry 4.0
Rigard Johan Steenkamp, Department of Operations Management, University of South Africa, Pretoria, RSA
ID 141 Remaining Life Prediction for Corroded Gas Pipeline Management in the Era of Industry 4.0
Seong-Jun Kim, Gangneung-Wonju National University, Wonju, Gangwon Province, Korea Republic
Woosik Kim, Center for Facility Technology Research, Gas Research Institute, Korea Gas Corporation, Korean Republic
ID 150 Critical Success Factors for Lean implementation “Projection on SMEs”
Mariam Houti, Systems Engineering Laboratory, National School of Applied Sciences, Kenitra Ibn Tofail University, Kenitra, Morocco
Laila El Abbadi, Systems Engineering Laboratory, National School of Applied Sciences, Kenitra Ibn Tofail University, Kenitra, Morocco
Abdellah ABOUABDELLAH, Systems Engineering Laboratory, National School of Applied Sciences, Kenitra Ibn Tofail University, Kenitra, Morocco
ID 151 Towards an Efficient Residential Electricity Consumption: An Assessment of the Effectiveness of Residential Electricity Efficiency-Incentive Subsidies Reform in Saudi Arabia
Ramzi Alahmadi, Department of Industrial Engineering Taibah University AL Madinah, Saudi Arabia
ID 152 The driver of hub port development in Africa
Samia BOUAZZA, BOSS team, GS laboratory, ENSA University, Morocco
Zoubida Benmamoun, BOSS team, GS laboratory, ENSA University, Morocco
Hanaa Hachimi, BOSS team, GS laboratory, ENSA University, Morocco
ID 153 Sustainable Procurement in the Public Sector Case study of Morocco
Houda Taoudi Benchekroun, GS Lanoratory, ENSA Kenitra, Morocco
Zoubida Benmamoun, GS Lanoratory, ENSA Kenitra, Morocco
Hanaa Hachimi, GS Lanoratory, ENSA Kenitra, Morocco
ID 154 Impact of quality and lean manufacturing in automotive parts suppliers’ competitiveness
Luz María Valdez de la Rosa, Engineering Management Program, Universidad de Monterrey, Nuevo León, México
Luis Alberto Villarreal Villarreal, Center for Business Development and Postgraduate, Universidad Autónoma de Nuevo León, Nuevo León, México
ID 155 Balancing The Workmanship Of a Production Line In The Manufacturing Industry Of a Personal Care Product
Jackson Generoso, Department of Production and Systems Engineering, Federal University of Santa Catarina, Brazil
Milton Alexandre Ziehlsdorff, Department of Production and Systems Engineering, Federal University of Santa Catarina, Brazil
Paulo Henrique Gamba, Department of Production and Systems Engineering, Federal University of Santa Catarina, Brazil
Yinping Mu, University of Electronic Science and Technology of China, China
Xiaoqiang Cai, The Chinese University of Hong Kong, Shenzhen, the Shenzhen Research Institute of Big Data, Guangdong, China
Xiaowo Tang, School of Management and Economics, University of Electronic Science and Technology of China, China
ID 157 A case of creative mixed method research to develop a total quality service (TQS) framework
Riaan Dirkse van Schalkwyk, Department of Operations Management , University of South Africa, Pretoria, RSA
Rigard Johan Steenkamp, Department of Operations Management, University of South Africa, Pretoria, RSA
ID 164 Multi-item, Multi-location Transshipment Model for Cross Filling
Suk-Chul Rim, Department of Industrial Engineering Ajou University Suwon 16499, Republic of Korea
JingJing Jiang, Department of Industrial Engineering Ajou University Suwon 16499, Republic of Korea
ID 165 Investigation of Project Delay in Construction Projects in the South African Rail Industry
Itumeleng Gladwell Motlhatlhedi, Postgraduate School of Engineering Management Faculty of Engineering, the Built Environment University of Johannesburg South Africa
Hannelie Nel, Postgraduate School of Engineering Management Faculty of Engineering, the Built Environment University of Johannesburg South Africa
ID 166 Applying Customer Relationship Management Principles in a Sales-Oriented Engineering Organisation
Linda Nhlengetwa, Post-Graduate School of Engineering Management Faculty of Engineering, the Built Environment, University of Johannesburg, South Africa
Hannelie Nel, Post-Graduate School of Engineering Management Faculty of Engineering, the Built Environment, University of Johannesburg, South Africa
Bheki Makhanya, Post-Graduate School of Engineering Management Faculty of Engineering, the Built Environment, University of Johannesburg, South Africa
ID 173 Substantial Utilization of MST_ to Reduce Taxi-Delay in the Metropolitan City of Johannesburg
Mike Nkongolo, School of Computer Science and Applied Mathematics, University of the Witwatersrand, Johannesburg, South Africa
Laby ILumbe, Department of Transport and Supply Chain, University of Johannesburg, Johannesburg, South Africa
ID 174 Categorization of Supply Chain Sustainability Risks in SMEs: A Preliminary evidence from a Developing Country
Agung Sutrisno, Department of Mechanical Engineering, Sam Ratulangi University, Manado, Indonesia
Vikas Kumar, Bristol Business School, University of the West of England, Bristol, United Kingdom
Dwi Handayani, Department of Industrial Engineering, Universitas Islam Indonesia, Yogyakarta, Indonesia
Rudi K. Arief, Department of Mechanical Engineering, Universitas Muhammadiyah Sumatera Barat, Bukit Tinggi,Indonesia
Shinta Virdhian, Balai Besar Logam dan Mesin, Jl. Sangkuriang
Charles Punuhsingon, Department of Mechanical Engineering, Sam Ratulangi University, Manado, Indonesia
ID 175 Factors Affecting Efficiency Of Police Stations In Metropolitan Police Division 3
Pornpimol Chaiwuttisak, Statistics Department, King Mongkut’s Institute of Technology Ladkrabang, Bangkok, Thailand
ID 177 Model-Based Engineering of a Process Wash Plant using SysML: Case study of beneficiation processes in a phosphate industry
Mariem Ait Bakader, Applied Organic Chemistry Laboratory, Sidi Mohamed Ben Abdellah University, FES, MOROCCO, Complex Systems Engineering Laboratory, Mohammed VI Polytechnic University, BENGUERIR, MOROCCO
Laurent Deshayes, Complex Systems Engineering, Mohammed VI Polytechnic University, BENGUERIR, MOROCCO
Mohammed El Asri, Applied Organic Chemistry Laboratory, Faculty of Sciences and Technics, Sidi Mohamed Ben Abdellah University, FES, MOROCCO
ID 179 Global Executive Doctoral Program
Leslie Monplaisir, PhD, Professor and Chair, Industrial and Systems Engineerinng, Wayne State University, Detroit, MI
ID 180 A Framework to Prolong Interval of Turnaround Maintenance (TAM) of Processing Plants: Pressure Drums Case Study
Abdelnaser Elwerfalli, College of Mechanical Engineering Technology Benghazi – Libya
ID 181 Analysis Of Changes In Productivity In The Colombian Banking Sector
Gloria Rodríguez-Lozano, School of Business Administration and Public Accounting, Universidad Nacional de Colombia, Bogotá, Colombia
ID 188 Augmented Reality for Technical Instructions – Challenges and Opportunities
Alina Fraczyk, Centre for Technical Communication School of Applied Linguistics, ZHAW Zurich University of Applied Sciences, Switzerland
ID 189 Advantages and Requirements for a Successful Introduction of an Industrial Tele Maintenance System
Michael Fritscher, Zentrum für Telematik, Magdalene-Schoch Str. 5, 97074 Würzburg, Germany
Christian Lilge, Zentrum für Telematik, Magdalene-Schoch Str. 5, 97074 Würzburg, Germany
Markus Krauß, Zentrum für Telematik, Magdalene-Schoch Str. 5, 97074 Würzburg, Germany
Prof. Dr. Klaus Schilling, Zentrum für Telematik, Magdalene-Schoch Str. 5, 97074 Würzburg, Germany
ID 190 Breaking paradigms of lean and six sigma improvement models, new perspective of implementation.
M.A. Gómez Gavito, Department of Lean Advancement Initiative – México, Universidad Popular Autónoma del Estado de Puebla, México
J.P. Nuño de la Parra, General Director of Internationalization, Universidad Popular Autónoma del Estado de Puebla, México
ID 193 The Impacts of Second Order Construct of Personal Resources on Employees’ Job Performance and the Mediating Role of Affective Commitment: SEM Analysis Approach
Abdul Talib Bon, Faculty of Technology Management, Business and Entrepreneurship, University Tun Hussein Onn Malaysia, Malaysia
Abdirahman Mohamud Shire, Faculty of Technology Management, Business and Entrepreneurship, University Tun Hussein Onn Malaysia, Malaysia
ID 194 The Relationship between Price Satisfaction, Non-financial and Financial Performance
Aries Susanty, Industrial Engineering Department, Diponegoro University, CampusTembalang, Indonesia
Atika Andriyani, Industrial Engineering Department, Diponegoro University, CampusTembalang, Indonesia
ID 195 Developing a Discrete Event Simulation Methodology to support a Six Sigma Methodology
Anees Hussain, Faculty of Engineering & Informatics University of Bradford Bradford, BD7 1DP, UK
Jose Eduardo Munive-Hernandez, Faculty of Engineering & Informatics University of Bradford Bradford, BD7 1DP, UK
Felician Campean, Faculty of Engineering & Informatics University of Bradford Bradford, BD7 1DP, UK
ID 199 Analysis of Factors Undermining the Reliability of Permanent Way Infrastructure in the South African Railway Industry
M Mukwena, Postgraduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg Gauteng, South Africa
A Wessels, Postgraduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg Gauteng, South Africa
J H C Pretorius, Postgraduate School of Engineering Management, Faculty of Engineering and the Built Environment, University of Johannesburg Gauteng, South Africa
ID 200 Logistics Performance and National Culture
Deepak P. Kesavan, Industrial and Manufacturing Engineering Dept., College of Engineering,
Ahmed M. Deif, Industrial Technology and Packaging, Orfalea College of Business, California Polytechnic State University, CA, USA
ID 201 Wind Energy: A Case Study On Wind Power As An Alternative Source Of Renewable Energy
E. Innocents Edoun, University of Johannesburg, Pretoria, GAUTENG, South Africa.
Professor C Mbohwa, University of Johannesburg, Pretoria, GAUTENG, South Africa.
Mrs Thobile Yvonne Bhila, University of Johannesburg, Pretoria, GAUTENG, South Africa.
ID 202 The storage and management of Natural Resources: A case study on water and energy usage and management in hotels in Gauteng
E. Innocents Edoun, University of Johannesburg, Pretoria, GAUTENG, South Africa.
Professor C Mbohwa, University of Johannesburg, Pretoria, GAUTENG, South Africa.
Thobile Yvonne Bhila, University of Johannesburg, Pretoria, GAUTENG, South Africa.
ID 203 Lean and Green Manufacturing Practices: A multiple case study about synergy
Paulo R. Avancini, Methodist University of Piracicaba (UNIMEP), Santa Bárbara D’Oeste, SP, Brazil
Jairo J. Assumpção, Federal University of Santa Catarina (UFSC), Florianopolis, SC, Brazil
André L. Helleno, Methodist University of Piracicaba (UNIMEP), Santa Bárbara D’Oeste, SP, Brazil
Lucila M. S. Campos, Federal University of Santa Catarina (UFSC), Florianopolis, SC, Brazil
ID 204 A Fuzzy-Network Analysis Approach for Modeling and Analyzing the Critical Success Factors for the ERP Implementation Projects
Shaikha Binkhatim, Sustainable Engineering Asset Management (SEAM) Research Group, University of Sharjah, Sharjah, UAE
Hamdi Bashir, Sustainable Engineering Asset Management (SEAM) Research Group, University of Sharjah, Sharjah, UAE
ID 205 Proactive orientation towards the market and the degree of novelty of innovation in the exporting intensity of the business sector in Colombia
Martha Lucía Pachón Palacios, Management, Finance and Economics Faculty, EAN University, Bogota, Colombia
Omar Alonso Patiño C., Management, Finance and Economics Faculty, EAN University, Bogota, Colombia
ID 206 The Cost-Effectiveness Of Solar Energy In South Africa
Polycarpe Feussi, The University of Johannesburg, South Africa
Innocents E Edoun, The University of Johannesburg, South Africa
Charles Mbohwa, The University of Johannesburg, South Africa
ID 207 Customer Churn Prediction Using Artificial Neural Network: An Analytical CRM Application
Seyed Hossein Iranmanesh, School of Industrial Engineering, College of Engineering University of Tehran, Tehran, Iran
Mahdi Hamid, School of Industrial Engineering, College of Engineering University of Tehran, Tehran, Iran
Mahdi Bastan, School of Industrial Engineering, College of Engineering University of Tehran, Tehran, Iran
Hamed Shakouri G., School of Industrial Engineering, College of Engineering University of Tehran, Tehran, Iran
Mohammad Mahdi Nasiri, School of Industrial Engineering, College of Engineering University of Tehran, Tehran, Iran
ID 208 A method to construct driving cycles based on micro-trips and cluster analysis
Marco Felipe Astaíza Castro, Pontificia Universidad Javeriana Cali, Valle del Cauca. 66238, Colombia
Jenny Díaz Ramírez, Department of Engineering, Universidad de Monterrey, Monterrey, N.L. 66238, Mexico
Michael Daniel Giraldo, Energy and Climate Change Research Group, School of Engineering and Science, Tecnologico de Monterrrey , Monterrey, N.L., 68849, Mexico
José Ignacio Huertas, Energy and Climate Change Research Group, School of Engineering and Science, Tecnologico de Monterrrey , Monterrey, N.L., 68849, Mexico
ID 209 Decrease in Loading Times for Trucks at a Steel Company
Arturo Ortega Vila, Industrial and Systems Engineering, Universidad de Monterrey, Engineering Department, Monterrey, Nuevo Leon, 66238, Mexico
Alejandro Jesús Cantú González, Industrial and Systems Engineering, Universidad de Monterrey, Engineering Department, Monterrey, Nuevo Leon, 66238, Mexico
Manuel Alejandro Solís Martínez, Industrial and Systems Engineering, Universidad de Monterrey, Engineering Department, Monterrey, Nuevo Leon, 66238, Mexico
Jenny Díaz Ramírez, Department of Engineering, Universidad de Monterrey, Monterrey, N.L. 66238, Mexico
ID 210 Activity-Based Costing (ABC) for Manufacturing Costs Reduction and Continuous Improvement: A Case Study
Dalal Al-Eidan, Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
Maram Al-Ahmad, Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
Maryam Al-Ajmi, Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
Nour Al-Sayed, Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
Reham Al-Ajmi, Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
Walid Smew, Industrial Engineering Department, College of Engineering and Technology, American University of the Middle East, Kuwait
ID 211 Making the Profitability Paradox of Bad Banks: A System Dynamics Approach
Mahdi Bastan, School of Industrial Engineering, College of Engineering University of Tehran, Tehran, Iran
Sareh Akbarpour, Alimohammad Ahmadvand, Department of Industrial Engineering, University of Eyvanekey, Garmsar, Iran
Hamed Shakouri G., School of Industrial Engineering, College of Engineering University of Tehran, Iran
ID 212 Improvement Plant Layout of Production Line in Textile Company: A Case Study
Yakcleem Montero Santos, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
Oscar V. Calderón Torres, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
Leandro L. Lorente Leyva, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
Israel D. Herrera Granda, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
Carlos A. Machado Orges, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
Ramiro V. Saraguro Piarpuezan, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
ID 213 Implementation of a metaheuristic in a simulation model for programming in a port system
Daniel Mendoza-Casseres, Industrial Engineering Department, Universidad del Atlántico, Barranquilla, Colombia
Jorge Juliao-Rossi, Faculty of Administrative and Accounting Sciences, Universidad de La Salle, Bogotá, Colombia
ID 214 The effect of monitor type on the front head posture (FHP)
Kyeong-Hee Choi, Department of Industrial Engineering, Sungkyunkwan University, Suwon, Gyeonggi-do 16419, Korea
Jae-Kyeong Kim, Department of Industrial Engineering, Sungkyunkwan University, Suwon, Gyeonggi-do 16419, Korea
Hyun-Ho Shim, Department of Industrial Engineering, Sungkyunkwan University, Suwon, Gyeonggi-do 16419, Korea
Min-Uk Cho, Department of Industrial Engineering, Sungkyunkwan University, Suwon, Gyeonggi-do 16419, Korea
Chae-Won Park, Department of Industrial Engineering, Sungkyunkwan University, Suwon, Gyeonggi-do 16419, Korea
Yong-Ku Kong, Department of Industrial Engineering, Sungkyunkwan University, Suwon, Gyeonggi-do 16419, Korea
ID 216 A double layer decision modeling for evaluating the conceptual arena of air pollution and linked measures
Atul Kumar Sahu, Department of Mechanical Engineering, National Institute of Technology, Raipur, India.
Udita Ranjanb, Department of Mechanical Engineering, National Institute of Technology, Raipur, India.
Mridul Singh Rajput, Department of Mechanical Engineering, National Institute of Technology, Raipur, India.
Harendra Kumar Narang, Department of Mechanical Engineering, National Institute of Technology, Raipur, India.
ID 217 An Approach of Designing Robust Plant Layout Using Genetic Algorithm
Rahul Sakharwade, Department of Mechanical Engineering, National Institute of Technology, Raipur, Chhattisgarh, India
Udit Narayan Sahu, Department of Mechanical Engineering, National Institute of Technology, Raipur, Chhattisgarh, India
Harendra Kumar Narang, Department of Mechanical Engineering, National Institute of Technology, Raipur, Chhattisgarh, India
Mridul Singh Rajput, Department of Mechanical Engineering, National Institute of Technology, Raipur, Chhattisgarh, India
ID 220 Analysis and Optimization of Wire Electric Discharge Cutting Parameters for Micro-hardness of Ni55.8Ti Shape Memory Alloys
Neeraj Sharma, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
ID 221 Taguchi integrated Grey Relation based Multi-Performance Optimization for Productivity and Surface Quality in Dry Machining of SS304
Neeraj Sharma, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
ID 222 Investigation on Wire Electric Discharge Cutting of Ni55.8Ti Shape Memory Alloy for Recast Layer Thickness
Neeraj Sharma, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
ID 223 A Case Study on Effectiveness of 4S Implementation in a Machine Shop
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
Valentine Khumalo, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
ID 224 Implementation of Shitsuke for Sustaining with 5S Culture in a Mechanical Workshop
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
Valentine Khumalo, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Republic of South Africa
ID 225 Industrial IoT integrated with Simulation – A Digital Twin approach to support real-time decision making
Romão Santos, Centre for Enterprise Systems Engineering, INESC TEC, Porto, Portugal
João Basto, Centre for Enterprise Systems Engineering, INESC TEC, Porto, Portugal
Symone G. S. Alcalá, Faculty of Sciences and Technology, Federal University of Goiás, Aparecida de Goiânia, Goiás, Brazil
Enzo Frazzon, Industrial and Systems Engineering Department, Federal University of Santa Catarina, Florianópolis, Brazil
Américo Azevedo, Department of Industrial Engineering and Management, Faculty of Engineering of the University of Porto, Porto, Portuga
ID 226 Biogas Power Generation Plant with Power of Hydrogen (PH) and Gas Flow Regulation
Abdulgader Gadi, UG Electrical Power Engineering Student, Yanbu Industrial College, Yanbu, Saudi Arabia
Mohammad Saharti, UG Electrical Power Engineering Student, Yanbu Industrial College, Yanbu, Saudi Arabia
Khaled Alghamdi, UG Electrical Power Engineering Student, Yanbu Industrial College, Yanbu, Saudi Arabia
Muhannad Alharbi, UG Electrical Power Engineering Student, Yanbu Industrial College, Yanbu, Saudi Arabia
Imran Fazal, Electrical and Electronics Engineering Department, Yanbu Industrial College, Yanbu, Saudi Arabia
Mohammed Alsumiri, Electrical and Electronics Engineering Department, Yanbu Industrial College, Yanbu, Saudi Arabia
ID 227 Nonintrusive Appliance Load Monitoring (NALP) Power Data Aggregation System
Arkan Bawazeer, UG Electrical Power Engineering Student, Yanbu Industrial College, Yanbu, Saudi Arabia
Murtadha Mohammed, UG Electrical Power Engineering Student, Yanbu Industrial College, Yanbu, Saudi Arabia
Ibrahim Binbakr, UG Electrical Power Engineering Student, Yanbu Industrial College, Yanbu, Saudi Arabia
Aamir Khan, Electrical and Electronics Engineering Department, Yanbu Industrial College, Yanbu, Saudi Arabia
Mohammed Alsumiri, Electrical and Electronics Engineering Department, Yanbu Industrial College, Yanbu, Saudi Arabia
ID 228 Integrating Production Assessment with PPAP – A QFD Approach
Chi-Shuan Liu, Department of Industrial Engineering and Management, Chaoyang University of Technology, Taichung, 41349, Taiwan
Horng-Chyi Horng, Department of Industrial Engineering and Management, Chaoyang University of Technology, Taichung, 41349, Taiwan
ID 229 Plagiarism in Colombian Universities – Regulatory Aspects
Omar Alonso Patiño C., Faculty of Administration, Finance and Economic Sciences, Universidad EAN, Bogotá – Colombia
Gerardo Avendaño Prieto, Faculty of Administration, Finance and Economic Sciences, Universidad EAN, Bogotá – Colombia
Laura Marcela Patiño Gutiérrez, Faculty of Administrative Sciences, Fundación Universitaria Cafam, Bogotá – Colombia
ID 230 Adoption of product-service system and the potential as a sustainable solution: A literature view in the fashion industry
Pedro Seolin dos Santos, Department of Production Engineering and Systems, Federal University of Santa Catarina – UFSC, Florianopolis – SC, Brazil
Lucila M. S. Campos, Department of Production Engineering and Systems, Federal University of Santa Catarina – UFSC, Florianopolis – SC, Brazil
Paulo Augusto Cauchick Miguel, Department of Production Engineering and Systems, Federal University of Santa Catarina – UFSC, Florianopolis – SC, Brazil
ID 231 A new climate indicator to be used in prediction of cooling energy in hot and humid regions
Mauricio Nath Lopes, Department of Refrigeration and Air Conditioning, Federal Institute of Santa Catarina (IFSC), São José, SC, Brazil
Roberto Lamberts, Department of Refrigeration and Air Conditioning, Federal Institute of Santa Catarina (IFSC), São José, SC, Brazil
ID 232 Measuring Sustainability Performance of SMEs in A Developing Country – A study of Southern Vietnam
Huy Q. Phan, Bristol Business School, University of the West of England, Bristol, BS16 1QY, UK
Vikas Kumar, Bristol Business School, University of the West of England, Bristol, BS16 1QY, UK
Mohammed Saad, Bristol Business School, University of the West of England, Bristol, BS16 1QY, UK
Jose A. Garza-Reyes, Centre for Supply Chain Improvement, University of Derby, Derby, UK
Simon Peter Nadeem, Centre for Supply Chain Improvement, University of Derby, Derby, UK
ID 233 Design & Fabrication of Smart Louvered Roof
Ali Alrutui, Department of Mechanical Engineering Technology, Yanbu Industrial College, Yanbu Al-Sinaiyah, Saudi Arabia
Dr. Khalid Ababtain, Department of Mechanical Engineering Technology, Yanbu Industrial College, Yanbu Al-Sinaiyah, Saudi Arabia
Engr. Ashraf Alghanmi, Department of Mechanical Engineering Technology, Yanbu Industrial College, Yanbu Al-Sinaiyah, Saudi Arabia
Engr. Fayyaz Nadeem, Department of Mechanical Engineering Technology, Yanbu Industrial College, Yanbu Al-Sinaiyah, Saudi Arabia
ID 235 Digitalization in Industry 4.0, Knowledge Management
Jiří Mouček, Department of Technologies and Measurement, Faculty of Electrical Engineering, University of West Bohemia, Univerzitní 26, 306 14 Pilsen, Czech Republic
ID 236 A Two-Step Stochastic Optimization and Simulation Approach for Scheduling Operating Rooms in an Ophthalmology Surgery Department
Mohsen Davoudkhani, Institut National de la Recherche Agronomique, F-35590 Saint Gilles, Paris, France
Mahdi Hamid, School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran
Reza Tavakkoli-Moghaddam, School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran
Mahdi Bastan, School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran
Mohammad Mahdi Nasiri, School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran
Hamed Shakouri G., School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran
ID 238 Selection of a biomass product using a hybrid approach of BW-PROMETHEE
Mahdi Bastan, School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran
Peyman Kiani Nahand, School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran
Samaneh Korlou, School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran
Mahdi Hamid, School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran
ID 239 Augmented Reality in Industrial Applications: Technologies and Challenges
Adriana Carvalho, C-MAST – Center for Mechanical and Aerospace Science and Technologies, University of Beira Interior, UBI, Covilhã, Portugal
Fernando Charrua-Santos, C-MAST – Center for Mechanical and Aerospace Science and Technologies, University of Beira Interior, UBI, Covilhã, Portugal
Tânia M. Lima, C-MAST – Center for Mechanical and Aerospace Science and Technologies, University of Beira Interior, UBI, Covilhã, Portugal
ID 241 Challenges in managing oil and gas supply chain – An exploratory study
Masha Menhat, School of Maritime Business and Management, University of Malaysia Terengganu, 21030 Kuala Terengganu, Terengganu, Malaysia
Jagan Jeevan, School of Maritime Business and Management, University of Malaysia Terengganu, 21030 Kuala Terengganu, Terengganu, Malaysia
Izyan Munirah Mohd Zaideen, School of Maritime Business and Management, University of Malaysia Terengganu, 21030 Kuala Terengganu, Terengganu, Malaysia
Yahaya Yusuf, Lancashire Business School, University of Central Lancashire, Preston, Lancashire.
ID 242 Optimal policy for a vendor-buyer inventory system with price-dependent demand, production cost discount and reliability consideration: A geometric programming approach
Bibhas Giri, Jadavpur University, Kolkata, India
Biswarup Samanta, Jadavpur University, Kolkata, India
ID 243 Antecedents and Consequences in Green Manufacturing: A Review Literature
Ira Setyaningsih, Universitas Gadjah Mada, UIN Sunan Kalijaga Yogyakarta, Yogyakarta, DIY, Indonesia
ID 244 Optimal Design of Additive Manufacturing Supply Chains
João Basto, INESC TEC – Technology and Science, Faculty of Engineering, University of Porto, Porto, Portugal
José Soeiro Ferreira, INESC TEC – Technology and Science, Faculty of Engineering, University of Porto, Porto, Portugal
Symone G. S. Alcalá, Faculty of Sciences and Technology, Federal University of Goiás, Aparecida de Goiânia, Goiás, Brazil
Enzo Frazzon, Industrial and Systems Engineering Department, Federal University of Santa Catarina, Florianópolis, Brazil
Samuel Moniz, Department of Mechanical Engineering, University of Coimbra, Coimbra 3030-788, Portugal
ID 245 The Effect of Implementing International Public Sector Accounting Standards on the Financial Reporting and Internal Control Systems in United Nations Agencies
Ahmad Ababneh, Department of Management, Sapienza – University of Rome, Via del Castro Laurenziano 9, Rome 00161, Italy
Pasqualina Porretta, Department of Management, Sapienza – University of Rome, Via del Castro Laurenziano 9, Rome 00161, Italy
Aiman Hija, Finance Department, Food and Agriculture Organization of the United Nations, Rome, Italy
ID 246 Design of Glass Reinforced Concrete Wall for Improved Utilisation of Natural Light and Aesthetics without Compromising the Strength
Takudzwa Kureya, Mechanical Engineering Department, University of Zimbabwe, Box MP 167, Mt Pleasant, Harare, Zimbabwe
Loice Gudukeya, Faculty of Engineering and the Built Environment,, University of Johannesburg,, Auckland Park 2006, P.O Box 524,, Johannesburg, South Africa
Charles Mbohwa, Faculty of Engineering and the Built Environment,, University of Johannesburg,, Auckland Park 2006, P.O Box 524,, Johannesburg, South Africa
ID 247 A Portable Workstation: Implementing Techniques of Product Design Process
Nadia Tanzeem, Dept. of Industrial and Production Engineering, Military Institute of Science and Technology, Mirpur Cantonment, Dhaka-1216, Bangladesh
Nafisa Ali Anika, Dept. of Industrial and Production Engineering, Military Institute of Science and Technology, Mirpur Cantonment, Dhaka-1216, Bangladesh
Zareen Tasnim Safa, Dept. of Industrial and Production Engineering, Military Institute of Science and Technology, Mirpur Cantonment, Dhaka-1216, Bangladesh
Ibrahim Hossain, Dept. of Industrial and Production Engineering, Military Institute of Science and Technology, Mirpur Cantonment, Dhaka-1216, Bangladesh
Maliha Huq, Dept. of Industrial and Production Engineering, Military Institute of Science and Technology, Mirpur Cantonment, Dhaka-1216, Bangladesh
ID 251 Two-stage Meta-Heuristic Algorithm for Parallel Machine Scheduling with Additional Resource Input in Shipyard Manufacturing
Soonkyo Lee, School of Industrial Management Engineering,, Korea University, Seoul, South Korea
Yoonho Seo, School of Industrial Management Engineering,, Korea University, Seoul, South Korea
Taesu Cheong, School of Industrial Management Engineering,, Korea University, Seoul, South Korea
Seokhyun Chung, Industrial & Operations Engineering, University of Michigan, Ann Arbor, MI, USA
ID 252 Performance assessment of buck converter using single and cascade control loops
Mukhtiar Ahmed Mahar, Department of Electrical Engineering, Mehran University of Engineering and Technology, Sindh, Pakistan
Abdul Sattar Larik, Department of Electrical Engineering, Mehran University of Engineering and Technology, Sindh, Pakistan
ID 253 locating battery swapping stations for smart e-bus system
Joon Moon, School of Industrial Management Engineering, Korea University, Seoul, 02841, South Korea
Taesu Cheong, School of Industrial Management Engineering, Korea University, Seoul, 02841, South Korea
Sang Hwa Song, Graduate School of Logistics, Incheon National University, Incheon, South Korea
ID 254 Life Cycle Assessment Of Needle Roller Bearing
Prince Ranjan, Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur, Rajasthan, India
Rajeev Agrawal, Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur, Rajasthan, India
Jinesh Kumar Jain, Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur, Rajasthan, India
ID 255 Life Cycle Assessment of Corrugated Box
Vishal Verma, Department of Mechanical Engineering,, Malaviya National Institute Technology, Jaipur (India), Jawahar Lal Nehru Marg, Jhalana Gram, Malaviya Nagar, Jaipur,India
Jinesh Kumar Jain, Department of Mechanical Engineering,, Malaviya National Institute Technology, Jaipur (India), Jawahar Lal Nehru Marg, Jhalana Gram, Malaviya Nagar, Jaipur,India
Rajeev Agrawal, Department of Mechanical Engineering,, Malaviya National Institute Technology, Jaipur (India), Jawahar Lal Nehru Marg, Jhalana Gram, Malaviya Nagar, Jaipur,India
ID 256 A Systematic Literature Review of Blockchain Technology in Agriculture
Vinay Surendra Yadav, Department of Mechanical Engineering, National Institute of Technology Raipur, Chhattisgarh, India
A. R. Singh, Department of Mechanical Engineering, National Institute of Technology Raipur, Chhattisgarh, India
ID 257 Knowledge Management to Minimize the Marketing Challenges using Strategic Management as a Tool
Animesh Agrawal, Department of Mechanical Engineering, NIT, Raipur, C.G., India
Suraj Kumar Mukti, Department of Mechanical Engineering, NIT, Raipur, C.G., India
ID 258 Probabilistic Control of Projects Based on Earned Value Management
Lady Vanessa Rangel, Industrial Engineering Department, Universidad del Valle, Cali, Colombia
Cristina Isabel Aguilar, Industrial Engineering Department, Universidad del Valle, Cali, Colombia
Alvaro Cuadros, Industrial Engineering Department, Universidad del Valle, Cali, Colombia
ID 260 Optimization of customers’ trust in the insurance industry by data envelopment analysis: An actual case study Saeed Mirzamohammadi, School of Industrial Engineering, Iran University of Science and Technology, Tehran, Iran
Mojtaba Hamid, School of Industrial Engineering, Iran University of Science and Technology, Tehran, Iran
ID 261 Electric-Vehicle Traveling Salesman Problem with Battery Swapping
Sungho Kang, School of Industrial Management Engineering, Korea University, Seoul, 02841, South Korea
Taesu Cheong, School of Industrial Management Engineering, Korea University, Seoul, 02841, South Korea
ID 263 Assessing Assimilation Gap in Higher Technical Educational Institutions: A Conceptual Framework
Prof. R.R.K. Sharma, Department of Industrial and Management Engineering, Indian Institute of Technology, Kanpur, 208016, India
Ateequr Rahman, Department of Academic Affairs & Student Affairs, Indian Institute of Technology, Goa, India
Dr. Sharif , Store & Purchase Section, Indian Institute of Technology, Kanpur, 208016, India
Vinayak A Drave, Department of Industrial and Management Engineering, Indian Institute of Technology, Kanpur, 208016, India
ID 264 Investigating the Motivators, Barriers and Enablers Associated with the Implementation of Sustainable Supply Chain in Saudi Manufacturing Industry
Abdulaziz Aljoghaiman, Bristol Business School, Business and Management Department, University of the West of England, Bristol, BS16 1QY, Uk
Mohammed Saad, Bristol Business School, Business and Management Department, University of the West of England, Bristol, BS16 1QY, Uk
Vikas Kumar, Bristol Business School, Business and Management Department, University of the West of England, Bristol, BS16 1QY, Uk
ID 265 Investigating The Impact Of Green Supply Chain Managemnet On Organisational Performance. A Case Of Seleceted Johannesburgbased Corporates
Amina Mumba, The University of Johannesburg, South Africa
E.I Edoun, The University of Johannesburg, South Africa
Bakam Fotso Genevieve, The University of Johannesburg, South Africa
ID 268 Factors of the innovation ecosystem by example of Latvian technological startup
Inese Ratanova, Faculty of Economics, Management and Finance, Baltic International Academy, LV1019, Lomonosova 4, Latvia
Inesa Voroncuka, Faculty of Business, Management and Economics, University of Latvia, LV-1586, Rainis Boulevard 19, Latvia
ID 269 Analysis Of Organizational Management And Supply Chains In Ecotourism Companies Of Lejanías, Uribe And Mesetas- Meta-Colombia
Gerardo Avendaño-Prieto, Faculty of Business Administration,, EAN University, Bogota Colombia
William E. Mosquera-Laverde, Faculty of administrative and economic sciences, Universidad Cooperativa de Colombia, Bogotá D.C., Colombia
Oscar A. Vásquez-Bernal, School of Basic Sciences; Technology and Engineering, Universidad Nacional Abierta y a Distancia – UNAD
ID 270 Ecotouristic foresight in the Colombian post-conflict for the sustainability of the tourist service with emphasis on ecological marketing. Buenaventura Case
William E. Mosquera-Laverde, Faculty of administrative and economic sciences, Universidad Cooperativa de Colombia, Bogotá D.C., Colombia
Oscar A. Vásquez-Bernal, School of Basic Sciences; Technology and Engineering, Universidad Nacional Abierta y a Distancia – UNAD, Bogotá D.C., Colombia
Claudia P. Gomez-E., Faculty of administrative and economic sciences, Universidad Cooperativa de Colombia, Bogotá D.C., Colombia
ID 271 Prevalence Study of Lean Management in Academic Education
Patrick Pötters, University of Applied Sciences Koblenz, Faculty of Operations Management, Konrad-Zuse-Str. 1, 56075 Koblenz, Germany
Christoph Szedlak, University of Applied Sciences Koblenz, Faculty of Operations Management, Konrad-Zuse-Str. 1, 56075 Koblenz, Germany
Bert Leyendecker, University of Applied Sciences Koblenz, Faculty of Operations Management, Konrad-Zuse-Str. 1, 56075 Koblenz, Germany
ID 272 Use of web application in the reactivation of freight intermodal transport in Colombia
Nelson David Navarro Díaz, National University of Colombia
Jefferson Rubiano , Director , Universidad de Cundinamarca
Juan Pablo Castrellon Torres, Universidad Nacional de Colombia
ID 274 Real-Time Fuzzy Rotation-Insensitive System for Motion Image Recognition
Adriano Breunig, Project and Institutional Coordination, Instituto Federal de Educação, Ciência e Tecnologia de Mato Grosso, Cuiaba / MT, 78068-536, Brasil
ID 276 Critical Competencies in Project- Based Organizations: An Interpretive Structural Modelling approach
Sara Sajedi, Department of Industrial Engineering, Amirkabir University of Technology, Tehran, Iran
Mohsen Akbarpour Shirazi, Department of Industrial Engineering, Amirkabir University of Technology, Tehran, Iran
ID 277 SAP System Implementation: A Case Study in a Public Institution of Turkey
Zeynep Caglar, Department of Industrial Engineering, Bahcesehir University, Istanbul, Turkey
Adnan Corum, Department of Industrial Engineering, Bahcesehir University, Istanbul, Turkey
ID 278 Application of Six Sigma in Improving the Quality of Recyclable Polymer in Collection Centers
Andrés R. Cruz Herrera, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
Jeanette del P. Ureña Aguirre, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
Leandro L. Lorente Leyva, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
ID 279 Mobile Robotic Platform for Simultaneous Localization and Mapping (SLAM) Experiments Based on Range Sensors
Jeanette del Pilar Ureña-Aguirre, Carrera de Ingeniería Industrial, Facutad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte
Javier Chiza López, Carrera de Ingeniería Industrial, Facutad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte
Mayra Maya Nicolalde, Carrera de Ingeniería Industrial, Facutad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte
Andrés Cruz Herrera, Carrera de Ingeniería Industrial, Facutad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte
Edisson Iván Aldás Serrano, Departamento de Mantenimiento Electromecánico del Poliducto Tres Bocas-Pascuales-Cuenca, Empresa Pública de Hidrocarburos del Ecuador, EP Petroecuador
ID 280 A Simulation Approach for Spare Parts Supply Chain Management
Narciso Caldas, Centre for Enterprise Systems Engineering, INESC TEC, Porto, Portugal
Jorge Pinho de Sousa, Centre for Enterprise Systems Engineering, INESC TEC, Porto, Portugal
Symone G. S. Alcalá, Faculty of Sciences and Technology, Federal University of Goiás, Aparecida de Goiânia, Goiás, Brazil
Enzo Frazzon, Industrial and Systems Engineering Department, Federal University of Santa Catarina, Florianópolis, Brazil
Samuel Moniz, Centre for Mechanical Engineering, Materials and Processes, University of Coimbra, Coimbra, Portugal
ID 281 Ethics in the Development and Engineering of Software Jeanette Del Pilar
Javier Chiza López, Carrera de Ingeniería Industrial, Facutad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte
Jeanette del Pilar Ureña-Aguirre, Carrera de Ingeniería Industrial, Facutad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte
Mayra Maya Nicolalde, Carrera de Ingeniería Industrial, Facutad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte
ID 283 Professional Drivers’ Motivations for Eco-driving Behavior
Jenny Díaz Ramírez, Engineering and Technologies Department, University of Monterrey, Nuevo León, Mexico
Lorena de la Paz Carrete, EGADE Business School, Tecnologico de Monterrrey, Toluca, Mex, 50110, Mexico
José Ignacio Huertas, Energy and Climate Change Research Group, School of Engineering and Science, Tecnologico de Monterrrey, Monterrey, N.L., 68849, Mexico
ID 284 Important Conditions for integrating a Logistics Cluster
Teresa Verduzco-Garza, Engineering & Technologies Division, Department of Engineering, Universidad de Monterrey, San Pedro Garza García, NL, 66238, Mexico
ID 285 The Impact of Consumer Return Strategies on Omnichannel Retailing
Prasenjit Mandal, Department of Operations Management, Indian Institute of Management Calcutta, Kolkata, 700104, India
ID 300 Fruiting Patterns of Cacao as Affected by Shading Regimes
Medinat Idowu Akeredolu, Department of Agricultural Technology, Federal Polytechnic, Ado – Ekiti, Ado, Ekiti, Nigeria
Timothy Laseinde, Department of Mechanical & Industrial Engineering, University of Johannesburg
Ifetayo Oluwafemi, Postgraduate School of Engineering Management, University of Johannesburg, RSA, Johannesburg, 2006, South African
ID 301 Evaluation of Saturated Hydraulic Conductivity at Adaptable Depths in a Sandy Loam Using the Beerkan Method
Ifetayo Oluwafemi, Postgraduate School of Engineering Management, University of Johannesburg,, RSA, Johannesburg, 2006, South African
Timothy Laseinde, Department of Mechanical & Industrial Engineering, University of Johannesburg
Damilola Dada, Department of Mechanical & Industrial Engineering, University of Johannesburg
ID 302 On Applying Big Data to Transform the Inspection Lines
JrJung Lyu, Department of Industrial and Information Management, National Cheng Kung University Tainan, Taiwan
Chia-Wen Chen, Department of Industrial and Information Management, National Cheng Kung University Tainan, Taiwan
Hong Yu Chen, Department of Industrial and Information Management, National Cheng Kung University Tainan, Taiwan
ID 303 A Study of Workforce Assignment Problem in Lean Factory on Machine Tool Industry
JrJung Lyu, Department of Industrial and Information Management, National Cheng Kung University Tainan, Taiwan
Ching-Hsiang Tung, Department of Industrial and Information Management, National Cheng Kung University Tainan, Taiwan
Chia-Wen Chen, Department of Industrial and Information Management, National Cheng Kung University Tainan, Taiwan
ID 304 Process View on E-Health with Risk Analysis
Michal Švehla, Department of Technologies and Measurement, Regional Innovation Centre for Electrical Engineering (RICE), Faculty of Electrical Engineering, University of West Bohemia
Jiří Tupa, Department of Technologies and Measurement, Regional Innovation Centre for Electrical Engineering (RICE), Faculty of Electrical Engineering, University of West Bohemia
ID 305 Optimization of operating parameters of an ingot mold during continuous casting – case of a content high carbon slab
Mounira Bourebia, Industrial Technologies Research Center. CRTI. P.O.BOX 64,, chéraga-16014,Algeria
Sihem Achouri, Industrial Technologies Research Center. CRTI. P.O.BOX 64,, chéraga-16014,Algeria
Soumaya Meddah, Industrial Technologies Research Center. CRTI. P.O.BOX 64,, chéraga-16014,Algeria
Amel Gharbi, Industrial Technologies Research Center. CRTI. P.O.BOX 64,, chéraga-16014,Algeria
Oualid Ghelloudj, Industrial Technologies Research Center. CRTI. P.O.BOX 64,, chéraga-16014,Algeria
Lakhdar Laouar , University Badji Mokhtar Bp 12-2300, Laboratory of Industrial Mechanics, Annaba, Algeria
ID 306 Promoting Supplier’s Environmental Innovation via Emission Taxation
Bosung Kim, Department of Industrial Engineering, Pusan National University, Pusan, South Korea
Sang Won Kim, Department of Decision Sciences and Managerial Economics, CUHK Business School, The Chinese University of Hong Kong, Hong Kong SAR
Kun Soo Park, Department of Industrial Engineering, Seoul National University, Seoul, South Korea
ID 308 Harmonics in Power Systems and Mitigating Techniques
Abdalrhman Safar, UG Electrical Power Engineering Student, Yanbu Industrial College, Yanbu, Saudi Arabia
Yasseen Ali, UG Electrical Power Engineering Student, Yanbu Industrial College, Yanbu, Saudi Arabia
Turki Alharbi, UG Electrical Power Engineering Student, Yanbu Industrial College, Yanbu, Saudi Arabia
Maher Aljohani, UG Electrical Power Engineering Student, Yanbu Industrial College, Yanbu, Saudi Arabia
Abdulhameed Salim, UG Electrical Power Engineering Student, Yanbu Industrial College, Yanbu, Saudi Arabia
Mustajab Khan, Electrical and Electronics Engineering Department, Yanbu Industrial College, Yanbu, Saudi Arabia
Mohammed Alsumiri, Electrical and Electronics Engineering Department, Yanbu Industrial College, Yanbu, Saudi Arabia
ID 315 Evaluation of Outfit Rental Fee Payment Processing System of LMFH Company
Mary Rose Arnejo, Department of Industrial Engineering, Cebu Institute of Technology – University, Cebu City, Philippines
Kathleen M. Econas, Department of Industrial Engineering, Cebu Institute of Technology – University, Cebu City, Philippines
Stephanie Clare S. Montecillo, Department of Industrial Engineering, Cebu Institute of Technology – University, Cebu City, Philippines
Jopie Lhea Ross N. Repuela, Department of Industrial Engineering, Cebu Institute of Technology – University, Cebu City, Philippines
Boniza C. Tumulak, Department of Industrial Engineering, Cebu Institute of Technology – University, Cebu City, Philippines
ID 316 The Comparison of Characteristics Profile of the Traditional Fishing Boats in Lamongan, Probolinggo, and Pasuruan, Indonesia
Yugowati Praharsi, Shipbuilding Institute of Polytechnic Surabaya, Jl. Teknik Kimia Kampus ITS, Sukolilo 60111, Surabaya, Indonesia
M. Abu Jami’in, Shipbuilding Institute of Polytechnic Surabaya, Jl. Teknik Kimia Kampus ITS, Sukolilo 60111, Surabaya, Indonesia
Gaguk Suhardjit, Shipbuilding Institute of Polytechnic Surabaya, Jl. Teknik Kimia Kampus ITS, Sukolilo 60111, Surabaya, Indonesia
Hui-Ming Wee, Chung Yuan Christian University, Chung Pei Road No. 200, Chung Li City 32023, Taiwan
ID 317 Towards Using Advanced Analytics for Port Performance Management
Sara El Mekkaoui, Equipe AMIPS, Ecole Mohammadia d’Ingénieurs,, Mohammed V University of Rabat, Morocco
Abdelaziz Berrado, Equipe AMIPS, Ecole Mohammadia d’Ingénieurs,, Mohammed V University of Rabat, Morocco
ID 318 Guidelines to Create a Student CAD Portfolio
Abe Zeid, MIE Department, Northeastern University, Boston
ID 319 Prediction of the Friction Coefficient of 13Cr5Ni2Mo Steel Using Experiments Plans-Study of Wear Behavior
Soumaya Meddah, Research Center in Industrial Technologies CRTI, P.O.BOX 64, Cheraga 16014 Algiers,
Algeria,
Mounira Bourebia, Research Center in Industrial Technologies CRTI, P.O.BOX 64, Cheraga 16014 Algiers,
Algeria
Amel Oulabbas, Research Center in Industrial Technologies CRTI, P.O.BOX 64, Cheraga 16014 Algiers,
Algeria
Chams eddine Ramoul, Research Center in Industrial Technologies CRTI, P.O.BOX 64, Cheraga 16014 Algiers,
Algeria
Samira Tlili, Research Center in Industrial Technologies CRTI, P.O.BOX 64, Cheraga 16014 Algiers,
Algeria
Ahlem Taleb, Research Center in Industrial Technologies CRTI, P.O.BOX 64, Cheraga 16014 Algiers,
Algeria
Sihem Achouri, Research Center in Industrial Technologies CRTI, P.O.BOX 64, Cheraga 16014 Algiers,
Algeria
ID 327 Ranking of the Factors for Resilient Humanitarian Supply Chain: A TOPSIS Approach
Rajesh Kr Singh, Management Development Institute, Gurgaon, India
Ayush Gupta, Production and Quantitative Methods Area, Indian Institute of Management Ahmedabad, Ahmedabad, India
ID 328 Optimizing Production Overtime Period and Backorder Quantity in Joint Production and Maintenance Scheduling
Chelliah Aruun Vijayanathan, Department of Mechanical and Industrial Engineering, Louisiana State University, Baton Rouge, LA 70803, USA
Bhaba R Sarker, Department of Mechanical and Industrial Engineering, Louisiana State University, Baton Rouge, LA 70803, USA
Md. Shahriar J. Hossain, Department of Engineering Technology, Northwestern State University, Natchitoches, LA 71497, USA
ID 329 Analysis Of Accidental Deaths During Songkran Festival Using Data Mining
Pornpimol Chaiwuttisak,Statistics Department, King Mongkut’s Institute of Technology Ladkrabang, Bangkok, Thailand
ID 330 The Impact of Carbon Accounting on Corporate Financial Performance: Evidence from the Energy Sector in Jordan
Ahmad Ababneh, Department of Management, Sapienza – University of Rome, Via del Castro Laurenziano 9, Rome 00161, Italy
ID 333 Understanding Capacity Planning Through a Dynamic Performance Management Approach for Public Sector
Sebastián Villa-Rincón, Faculty of Economic Sciences, Nueva Granada Military University, Bogotá, Colombia
Milton M. Herrera, Faculty of Economic Sciences, Nueva Granada Military University, Bogotá, Colombia
ID 334 A Method to Measure Logistic Interoperability using Structural Equation Modelling
Sandro Breval Santiago, Department of Administration and Management, Federal University of Amazonas, Manaus, Amazonas, Brazil
Fabiana Lucena de Oliveira, Department of Economics, State University of Amazonas, Manaus, Amazonas, Brazil
Carlos Manoel Taboada Rodriguez , Department of Production and Systems Engineering, Federal of University of Santa Catarina, Florianópolis, Santa Catarina, Brazil
Ileana G. Pérez Vergara , Group Director of New Technologies Research Labor and Management, Universidad San Buenaventura Cali, Cali, Colombia
ID 335 A Review of Adomian Decomposition Method
Ira Sumiati , Master Program of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Endang Rusyaman, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Subiyanto, Department of Marine Science, Faculty of Fishery and Marine Science,, Universitas Padjadjaran, Indonesia.
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 336 Review Methods to Solve Fractional Black-Scholes
Sevira Nurazizah, Universitas Padjadjaran, Indonesia
Endang Rusyaman, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Subiyanto, Department of Marine Science, Faculty of Fishery and Marine Science,, Universitas Padjadjaran, Indonesia.
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 337 Review Strategies of Optimal Crop Insurance Selection Based on Climate Change
Diantiny Mariam Pribadi, Master Program of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Riaman, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Subiyanto, Department of Marine Science, Faculty of Fishery and Marine Science,, Universitas Padjadjaran, Indonesia.
Abdul Talib Bon, Department of Production and Operations,, University Tun Hussein Onn Malaysia, Malaysia
ID 338 A Review Climate Index Insurance in the Field of Agriculture Using the Copula Model
Fiyan Handoyo, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Riaman, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Subiyanto, Department of Marine Science, Faculty of Fishery and Marine Science,, Universitas Padjadjaran, Indonesia.
Abdul Talib Bon, Department of Production and Operations,, University Tun Hussein Onn Malaysia, Malaysia
ID 339 On the Impact of Cargo Capacity and Cost on Shipment Consolidation
Sila Cetinkaya, EMIS Department, SMU, Dallas, TX
Liqing Zhang, United Airlines, Houston, TX
ID 340 Analysis Of Credit Scoring Using Particle Swarm Optimization Algorithm In Logistic Regression Model
Ulfa Rahmani, Master Program of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Riaman, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Subiyanto, Department of Marine Science, Faculty of Fishery and Marine Science,, Universitas Padjadjaran, Indonesia.
Abdul Talib Bon,Department of Production and Operations,, University Tun Hussein Onn Malaysia, Malaysia
ID 341 Generalized Transportation Relay Network Design
Amin Ziaeifar, Department of Engineering Management, Information, and Systems, Southern Methodist University, Dallas, TX, USA 75275, USA
Halit Uster, Department of Engineering Management, Information, and Systems, Southern Methodist University, Dallas, TX, USA 75275, USA
ID 342 Improvement Production Capacity of Recycled Plastic Wood through Six Sigma DMAIC
Andrés R. Cruz Herrera, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
Estefanía Pozo Benavides, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
Jeanette del P. Ureña Aguirre, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
Leandro L. Lorente Leyva, Facultad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte, Ibarra, Ecuador
ID 343 Development of Industry 4.0 Virtual Lab for Manufacturing Engineering Education
Kapil Gupta, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa
M Mukhawana, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa
Madindwa Mashinini, Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Johannesburg, South Africa
Arno Louw, Centre for Academic Technologies, University of Johannesburg, Johannesburg, South Africa
ID 344 The stability test of traditional fishing boats in East Java, Indonesia based on the International Maritime Organization Standard
Yugowati Praharsi, Shipbuilding Institute of Polytechnic Surabaya, Jl. Teknik Kimia, Kampus ITS, Sukolilo, Surabaya 60111, Indonesia
M. Abu Jami’in, Shipbuilding Institute of Polytechnic Surabaya, Jl. Teknik Kimia, Kampus ITS, Sukolilo, Surabaya 60111, Indonesia
Gaguk Suhardjito, Shipbuilding Institute of Polytechnic Surabaya, Jl. Teknik Kimia, Kampus ITS, Sukolilo, Surabaya 60111, Indonesia
Hui-Ming Wee, Department of Industrial and System Engineering, Chung Yuan Christian University, Chung Pei Road No. 200, Chungli City 32023, Taiwan
ID 345 The Inventory Control Analysis of Head Truck Spare Parts with Continuous Review Policy in Container Terminal Company
Yugowati Praharsi, Shipbuilding Institute of Polytechnic Surabaya, Jl. Teknik Kimia, Kampus ITS, Sukolilo, Surabaya 60111, Indonesia
Eko Julianto, Shipbuilding Institute of Polytechnic Surabaya, Jl. Teknik Kimia, Kampus ITS, Sukolilo, Surabaya 60111, Indonesia
Hui-Ming Wee, Department of Industrial and System Engineering, Chung Yuan Christian University, Chung Pei Road No. 200, Chungli City 32023, Taiwan
ID 358 Requirements for Education 4.0 and study programs within Industry 4.0
Andrea Benesova, Department of Technologies and Measurement, Faculty of Electrical Engineering, University of West Bohemia, Univerzitní 2732/8, 301 00 Pilsen, Czech Republic
Martin Hirman, Department of Technologies and Measurement, Faculty of Electrical Engineering, University of West Bohemia, Univerzitní 2732/8, 301 00 Pilsen, Czech Republic
Frantisek Steiner, Department of Technologies and Measurement, Faculty of Electrical Engineering, University of West Bohemia, Univerzitní 2732/8, 301 00 Pilsen, Czech Republic
Jiri Tupa, Department of Technologies and Measurement, Faculty of Electrical Engineering, University of West Bohemia, Univerzitní 2732/8, 301 00 Pilsen, Czech Republic
ID 359 Determination of changes between Lean management and Lean 4.0
Andrea Benesova, Department of Technologies and Measurement, Faculty of Electrical Engineering, University of West Bohemia, Univerzitní 2732/8, 301 00 Pilsen, Czech Republic
Jiri Tupa, Department of Technologies and Measurement, Faculty of Electrical Engineering, University of West Bohemia, Univerzitní 2732/8, 301 00 Pilsen, Czech Republic
ID 360 An Assessment On The Implementation Of Sustainable Supply Chain Management (Green Public Procurement) A case study in the city of Johannesburg Municipality
Kanakana Ernest Mutenda, Faculty of Engineering and the Built Environment University of Johannesburg, PO BOX, 524, Auckland Park, 2006, South Africa
ID 361 An Investigation of Supply Chain Operational Improvements for Small and Medium Enterprises (SMEs): A UK Manufacturing Case Study
Fredrick Betuel Sawe, Derby Business School, University of Derby, Kedleston Road,, Derby, DE22 1GB, UK
Jay Daniel, Derby Business School, University of Derby, Kedleston Road,, Derby, DE22 1GB, UK
ID 362 Gold Value Addition and Beneficiation for Women in the Mining Sector
M. Manyuchi, Department of Mining Research, Value Addition and Beneficiation, Ministry of Mines and Mining Development, Zimbabwe
Mbohwa, Department of Operations and Quality Management, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
Muzenda, Department of Chemical Engineering Technology, Faculty of Engineering and the Built Environment, University of Johannesburg, South Africa
ID 363 Mathematical Modelling of Multi-Product Ordering in Three-Echelon Supply Chain Networks
Seyed Mahdi Homayouni, LIAAD – INESC TEC,, Porto, Portugal.
Amirhossein Khayyambashi, Department of Industrial Engineering, Lenjan Branch, Islamic Azad University,, Esfahan, Iran.
Dalila B.M.M. Fontes, LIAAD – INESC TEC, and, Faculdade de Economia da Universidade do Porto,, Porto, Portugal.
João Chaves Fernandes, LIAAD – INESC TEC,, Porto, Portugal.
ID 364 Reviewing the use of Multi-Criteria Group Decision Making Methods for Transportation Problems: Case of Transport Mode Selection Problem
Afaf Haial, Research team AMIPS, Ecole Mohammadia d’Ingénieurs,, Mohammed V University of Rabat, Morocco
Abdelaziz Berrado, Research team AMIPS, Ecole Mohammadia d’Ingénieurs,, Mohammed V University of Rabat, Morocco
Loubna Benabbou, Management sciences Department, UQAR-Lévis Campus, Lévis (Québec). Canada
ID 377 Sustainable Manufacturing Practices, Sustainable Performance and the Moderating Effect of Innovation
K.K. Thilini Suvimali, Department of Decision Sciences,, University of Sri Jayewardenepura, Nugegoda, Sri Lanka.
Nithya P. Parameswara, Department of Decision Sciences,, University of Sri Jayewardenepura, Nugegoda, Sri Lanka.
ID 378 Applicable Models of Customer Analytics for a Retail Company in Mexico
Daniela Garza Gutiérrez, Engineering Management Academic Program, Universidad de Monterrey, Nuevo León, México
Juan Ignacio González Espinosa, Engineering Department, Universidad de Monterrey, Nuevo León, México
Luz María Valdez de la Rosa, Engineering Department, Universidad de Monterrey, Nuevo León, México
ID 380 TKFR2: A Multi-function Robot
Turki Ahmed Yanbu, Industrial College, Yanbu Industrial City, AlMadinah, Saudi Arabia
ID 381 The Effect of The AIDC On JIDOKA’s Performance via VSM to Reduce the total Manufacturing Lead Time
Ahmed M. Abed, Industrial Engineering Department, AIET, Alexandria
Dr.Tamer S. Gaafar, Computer and systems dept., Zagazig University
ID 382 Preliminary Study on Neural Correspondence of Human Trust
Seeung Oh, Adjunct Professor, North Carolina A and T state university
Younho Seong, Associate Professor, North Carolina A and T state university
Eui Park, Professor, North Carolina A&T State University
ID 383 Student Satisfaction and I-E-M Method Proposal for Improved Learning Experience of Generation Y and Generation Z Engineering Students
Romalyn L. Galingan, Industrial Engineering Department, Technological Institute of the Philippines, Quiezon City, Metro Manila, Philippines
ID 385 Developing Rasterization Using Unstable Modalities
Heejoo Choi, SEOUL SEOUL, South Korea
Sangsoo Park, SEOUL SEOUL, South Korea
ID 386 Title: The Move It Forward Theory (MIFT) offers a better method to manage major machine failure in a serial flow line.
William Edward, Ph.D. , ISE Department, Oakland University,
Sankar Sengupta, Ph.D., Professor, ISE Department, Oakland University
Michael Latcha, Ph.D., Associate Professor, Mechanical Engineering, Department, Oakland University
ID 387 The Effects of the Fourth Industrial Revolution on the Career Progression of Engineers in the South African Packaging Industry
Gcina Mduduzi Nzima, Post-Graduate School of Engineering Management,, University of Johannesburg, South Africa
Hannelie Nel, Post-Graduate School of Engineering Management,, University of Johannesburg, South Africa
Bheki Makhanya, Post-Graduate School of Engineering Management,, University of Johannesburg, South Africa
ID 388 Usefulness of System Dynamics Models in Systems Engineering: the Systems-Thinking Educational Perspective
Vladimír Bureš, Faculty of Informatics and Management, University of Hradec Kralove, Hradec Kralove, Czech Republic
Tereza Otčenášková, Faculty of Informatics and Management, University of Hradec Kralove, Hradec Kralove, Czech Republic
Marek Zanker, Faculty of Informatics and Management, University of Hradec Kralove, Hradec Kralove, Czech Republic
ID 389 Dynamic perspectives in Colombian Swine Supply Chain
Johanna Trujillo Díaz, Escuela Colombiana de Ingeniería
Milton M. Herrera, Universidad Militar Nueva Granada
Hugo Rene Sarmiento, Escuela Colombiana de Ingeniería Julio Garavito
ID 390 Identifying Barriers of Lean Six Sigma Implementation in RMG Sector: A Case Study
Ferdous Sarwar, Bangladesh University of Engineering and Technology
Farzana Islam, Bangladesh University of Engineering & Technology
Md Sadman Sakib , Bangladesh University of Engineering & Technology
Sampa Halder , Bangladesh University of Engineering & Technology
ID 391 Hybrid System Operating LED Streetlight
Aldawi Fayez, Department of Mechanical Engineering, Yanbu Industrial College, Yanbu, 4645, Saudi Arabia
ID 392 Energy Performance of Insulation Material
Aldawi Fayez, Department of Mechanical Engineering, Yanbu Industrial College, Yanbu, 4645, Saudi Arabia
ID 393 New Approaches to Fast the Iterative Closest Point (ICP) Algorithm: Application to the Inspection of Freeform Surfaces
Noureddine AZZAM, Department of Engineering Transport, Faculty of Sciences and Technology, University of the Mentouri Brothers of Constantine 1, Road of Ain-el-Bey, 25000 Constantine, Algeria.
Fouad GUERDOUH, Department of Engineering Transport, Faculty of Sciences and Technology, University of the Mentouri Brothers of Constantine 1, Road of Ain-el-Bey, 25000 Constantine, Algeria.
ID 394 Effects of Collaborative Learning Blended Knowledge Management E-learning Approach on Students’ Motivation in Higher Education
Krittawaya Thongkoo, College of Arts, Media and Technology, Chiang Mai University, Chiang Mai, 50200, THA
Kannika Daungcharone, College of Arts, Media and Technology, Chiang Mai University, Chiang Mai, 50200, THA
ID 395 A Review of Adomian Decomposition Method and Applied to Deferential Equations
Ira Sumiati, Master Program of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Endang Rusyaman, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Subiyanto, Department of Marine Science, Faculty of Fishery and Marine Science, Universitas Padjadjaran, Indonesia.
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 396 Literature Review on Employment of Unmanned Aerial Vehicles for Disaster Management
Aarushi Doctor, Department of Mechanical Engineering, K. J. Somaiya College of Engineering, Mumbai, India
Darshi Khirani, Department of Mechanical Engineering, K. J. Somaiya College of Engineering, Mumbai, India
Rakesh D. Raut, Operations & Supply Chain Management Group, National Institute of Industrial Engineering (NITIE), Mumbai, India
Vaibhav S. Narwane, Department of Mechanical Engineering, K. J. Somaiya College of Engineering, Mumbai, India
ID 400 Real time car engine condition monitoring by using instantaneous angular speed analysis (IAS)
Dr. Abdullrhman Sait, Mechanical Engineering Technology Department, Yanbu Industrial College, Yanbu, Kingdom of Saudi Arabia
Jamal Alfifi, Mechanical Engineering Technology Department, Yanbu Industrial College, Yanbu, Kingdom of Saudi Arabia
Abdullah Alsheri, Mechanical Engineering Technology Department, Yanbu Industrial College, Yanbu, Kingdom of Saudi Arabia
Khalid Alsaidlani, Mechanical Engineering Technology Department, Yanbu Industrial College, Yanbu, Kingdom of Saudi Arabia
ID 401 Production Employees Knowledge in Digitized Production Environment
Felicita Chromjaková, Tomas Bata University in Zlin, Faculty of Management and Economics, Department of Industrial Engineering and Information Systems, Zlín, 76001, CZ
Denisa Hrušecká, Tomas Bata University in Zlin, Faculty of Management and Economics, Department of Industrial Engineering and Information Systems, Zlín, 76001, CZ
ID 402 Mistakes in Managing Local Community; Exploring the Case of Repsol in Canary Islands
Roya Derakhshan, Department of Department of Management, Economics and Industrial Engineering, Politecnico di Milano, Milano, Italy, School of Industrial Engineering, Universidad Politécnica de Madrid, Madrid, Spain
Victor Gomez Frias, School of Industrial Engineering, Universidad Politécnica de Madrid, Madrid, Spain
ID 403 Assessing Due Date Fulfillment for Lumber Manufacturing Production Orders
Francisco P. Vergara, Wood Engineering Department, Faculty of engineering, The University of Bio-Bio, Collao Avenue 1202, Casilla 5-C, Concepción, CHILE
ID 404 To understand the applications of cloud computing adoption in various sectors
Darshi Khirani, Department of Mechanical Engineering, K. J. Somaiya College of Engineering, Mumbai, India
Aarushi Doctor, Department of Mechanical Engineering, K. J. Somaiya College of Engineering, Mumbai, India
Vaibhav S. Narwane, Department of Mechanical Engineering, K. J. Somaiya College of Engineering, Mumbai, India
Rakesh D. Raut, Operations & Supply Chain Management Group, National Institute of Industrial Engineering (NITIE), Mumbai, India
Balkrishna E. Narkhede, Industrial Engineering and Manufacturing Systems Group,, National Institute of Industrial Engineering (NITIE), Mumbai, India
ID 406 Prediction of the fracture of a non-alloy steel calm to aluminum by simulation in direct tensile test
Achouri, Research Center in Industrial Technologies CRTI. P.O.Box 64, Cheraga 16014 Algiers, Algeria
R. Benchouieb, Research Center in Industrial Technologies CRTI. P.O.Box 64, Cheraga 16014 Algiers, Algeria
O.Ghalloudj, Research Center in Industrial Technologies CRTI. P.O.Box 64, Cheraga 16014 Algiers, Algeria
M. Bourebia, Research Center in Industrial Technologies CRTI. P.O.Box 64, Cheraga 16014 Algiers, Algeria
S. Medahhe, Research Center in Industrial Technologies CRTI. P.O.Box 64, Cheraga 16014 Algiers, Algeria
A. Oualabbas, Research Center in Industrial Technologies CRTI. P.O.Box 64, Cheraga 16014 Algiers, Algeria
ID 407 Needle Stick Injury: Occupational Hazards from Medical Waste among Healthcare Workers
Jaita Mondal, Associate Professor, M.Sc (Community Health Nursing); MBA (Hospital Management), VISWASS School & College of Nursing, Chhatabar, Odisha
ID 408 Rebuilding Organization’s Legitimacy in the Eyes of Local Community; Case Study of Oil and Gas Megaprojects
Roya Derakhshan, Department of Management, Economics and Industrial Engineering, Politecnico di Milano, Via Lambruschini 4 – 20156 Milan, Italy
Mauro Mancini, Department of Management, Economics and Industrial Engineering, Politecnico di Milano, Via Lambruschini 4 – 20156 Milan, Italy
ID 416 A Clustering Algorithm for Location Routing Problem with Outsourced Delivery
Junko Hosoda, Faculty of Science and Technology, Sophia University, Tokyo, Japan, Center for Technology Innovation – Production Engineering, Hitachi Ltd., Kanagawa, Japan
Takashi Irohara, Faculty of Science and Technology, Sophia University, Tokyo, Japan
ID 419 Development of a Campus Carbon Footprint Intervention Framework
Joo Peng Ng, Department of Mechanical Engineering, Faculty of Engineering, Technology and Built Environment, UCSI University, 56000 Cheras, Kuala Lumpur, Malaysia
Ezutah Udoncy Olugu, Department of Mechanical Engineering, Faculty of Engineering, Technology and Built Environment, UCSI University
56000 Cheras, Kuala Lumpur, Malaysia
ID 421 Compressed Air Driven Car
Mohammed Saleh Alrashedi, Department of Mechanical Engineering Technology, Yanbu Industrial College,, Yanbu Al-Sinaiyah, Saudi Arabia
Mohammad Tarahib Alharbi, Department of Mechanical Engineering Technology, Yanbu Industrial College,, Yanbu Al-Sinaiyah, Saudi Arabia
Fahad Alhujaili, PhD, Assistant professor., Department of Mechanical Engineering Technology, Yanbu Industrial College,, Yanbu Al-Sinaiyah, Saudi Arabia
ID 423 Teaching Assistantship Assignment Optimization using Hungarian Algorithm – A Case Study
Chandra Mouli R. Madhuranthakam, Chemical Engineering Department,, Abu Dhabi University, Abu Dhabi, United Arab Emirates
Mukhtar Al-Ismaily, Chemical Engineering Department, University of Waterloo, Waterloo, Ontario, Canada
Ali Elkamel, Chemical Engineering Department, University of Waterloo, Waterloo, Ontario, Canada, Chemical Engineering Department,
Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates
ID 424 Life Cycle Assessment of Residential Buildings Considering Photovoltaic Systems
Dhia Jabri, Chemical Engineering Department, University of Waterloo, Waterloo, Ontario, Canada
Lena Ahmadi, Chemical Engineering Department, University of Waterloo, Waterloo, Ontario, Canada
Ali Elkamel, Chemical Engineering Department, University of Waterloo, Waterloo, Ontario, Canada, Chemical Engineering Department, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates
Chandra Mouli R. Madhuranthakam, Chemical Engineering Department, Abu Dhabi University, Abu Dhabi, United Arab Emirates
ID 425 Statistical and Kinetic Modeling for Investigating Acetyl Salicylic Acid Stability
Najwa Alwazni, Chemical Engineering Department, University of Waterloo, Waterloo, Ontario, Canada.
Chandra Mouli R Madhuranthakam, Chemical Engineering Department, Abu Dhabi University, Abu Dhabi, United Arab Emirates.
Asmaa Awad, Chemical Engineering Department, University of Waterloo, Waterloo, Ontario, Canada.
Ibrahim Mustafa1, Helwan University, Cairo, Egypt
Mohamed Binshams, Bahrain University, Bahrain
Ali Elkamel, Chemical Engineering Department, University of Waterloo, Waterloo, Ontario, Canada, Chemical Engineering Department, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates
ID 426 Multi-criteria Supplier Selection for Implementing Lean Six Sigma Using Fuzzy AHP
Ferdous Sarwar, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh
Farzana Islam, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh
Md Sadman Sakib, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh
Sampa Halder, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh
ID 427 Optimizing a Solid Waste Management Model using Particle Swarm Optimization
Ferdous Sarwar, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh
Farzana Islam, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh
Md Sadman Sakib, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh
Sampa Halder, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh
ID 428 Business Process Modeling for Tracing Halal Food using BPMN
Yulita Veranda Usman, Agroindustrial Engineering Department, Bogor Agricultural University, Bogor, Industrial Engineering Department, Pancasila University, Jakarta, Indonesia
Anas Miftah Fauzi, Agroindustrial Engineering Department, Bogor Agricultural University, Bogor, Indonesia
Tun Tedja Irawadi, Chemistry Department, Bogor Agricultural University, Bogor, Indonesia
ID 429 Solving the Dynamic Facility Layout Problem using Dynamic Programing
Saeideh Salimpour, Production and Operations Management Research Lab, University of Windsor, Windsor, ON, Canada
Ahmed Azab, Production and Operations Management Research Lab, University of Windsor, Windsor, ON, Canada
ID 430 Sustainability of Sago Agro-industry Using Rapid Appraisal (Case study : Sago Industri X in South Sorong, Papua)
Mega Ayu Yusuf, Department of Agricultural Engineering, Musamus University, 99616, Indonesia
Muhammad Romli and Suprihatin, Department of Agroindustrial Technology, Bogor Agricultural University, 16680, Indonesia
Edi Iswanto Wiloso, Research Center for Chemistry, Indonesian Institute of Sciences (LIPI), Tangerang Selatan, 15314, Indonesia
ID 431 Study of Inhibitory Efficacy of Natural Extract of Opuntia Ficus Indica as Green Inhibitor for Corrosion of Mild Steel in Drilling Water
Oulabbas Amel, Research Center In industrial technologies CRTI P.O.Box 64, Cheraga 16014 Algiers, Algeria, University Badji Mokhtar Bp 12-2300, Laboratory of surface engineering (L.I.S), Annaba, Algeria
Meddah Soumaya, Research Center In industrial technologies CRTI P.O.Box 64, Cheraga 16014 Algiers, Algeria
Achouri Sihem, Research Center In industrial technologies CRTI P.O.Box 64, Cheraga 16014 Algiers, Algeria
Tlili Samira, Research Center In industrial technologies CRTI P.O.Box 64, Cheraga 16014 Algiers, Algeria
Ramoul Chems Eddine1, Research Center In industrial technologies CRTI P.O.Box 64, Cheraga 16014 Algiers, Algeria
Remichi Nasser, Research Center In industrial technologies CRTI P.O.Box 64, Cheraga 16014 Algiers, Algeria
ID 432 The alkali concentration effect on quality of semi refined carrageenan production : a meta-analysis
Laela Chairani, Department of Agroindustrial Engineering, IPB Universit, Bogor, West Java, Indonesia, Department of Industrial Engineering, Pancasila University, Jakarta, Indonesia
Sukardi, Department of Agroindustrial Engineering, IPB University, Bogor, West Java, Indonesia
Titi Chandra Sunarti, Department of Agroindustrial Engineering, IPB University, Bogor, West Java, Indonesia
Faqih Udin, Department of Agroindustrial Engineering, IPB University, Bogor, West Java, Indonesia
ID 433 A Hierarchical Facility Location-Allocation Model for the Maternal Healthcare in India
Ankit Chouksey, Mechanical Engineering Department, IIT(BHU), Varanasi, India 221005,
A. K. Agrawal, Professor, Mechanical Engineering Department, IIT(BHU), Varanasi, India 221005,
Ajinkya N. Tanksale, Assistant Professor, Mechanical Engineering Department, IIT(BHU), Varanasi, India
ID 434 Inverted Hockey Stick Effect In The European Industry: Inventory Reduction In The Last Fiscal Quarter
Nuno Guedes Vieira, Faculty of Economics, University of Porto, Porto, Portugal
Catarina Delgado, LIAAD-INESC TEC and Faculty of Economics, University of Porto, Porto, Portugal
José António Moreira, Faculty of Economics, University of Porto, Porto, Portugal
ID 435 Sustainable UK Food Manufacturer Supplier Selection: A Conceptual Framework for the Responsive Supply Chain in the Era of Industry 4.0
Stella Sofianopoulou, Faculty of Business, Law and Tourism, The University of Sunderland, St Peters Campus, St Peters Way, Sunderland SR6 0DD
James Hennerley, Faculty of Business, Law and Tourism, The University of Sunderland, St Peters Campus, St Peters Way, Sunderland SR6 0DD
ID 437 Operational Excellence and Feasibility Analysis of raw material
Jacobo Tijerina Aguilera, Universidad de Monterrey, San Pedro Garza García, Nuevo León, México
ID 438 Horizontal Collaboration to Reduce Traffic Congestion: Opportunities for Industries of Bangladesh by improving Smart Conveyance
Rumaisa Ahmed, Industrial & Production Engineering Department, Military Institute of Science & Technology, Dhaka, Bangladesh
Fatin Ishraq, Industrial & Production Engineering Department, Military Institute of Science & Technology, Dhaka, Bangladesh
Joytun Nisa Joti, Industrial & Production Engineering Department, Military Institute of Science & Technology, Dhaka, Bangladesh
ID 439 The Ecological Footprint of Polyethylene Teraphthalate. A Case Study
Jeanette del Pilar Ureña-Aguirre, Carrera de Ingeniería Industrial, Facutad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte
Andrés Cruz Herrera, Carrera de Ingeniería Industrial, Facutad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte
Javier Chiza López, Carrera de Ingeniería Industrial, Facutad de Ingeniería en Ciencias Aplicadas, Universidad Técnica del Norte
ID 450 Governance Arrangements for Agile Projects
Kwete Mwana Nyandongo, College of Business and Economics, University of Johannesburg, Johannesburg, South Africa
Khanya Khanyile, College of Business and Economics, University of Johannesburg, Johannesburg, South Africa
ID 451 Assessing the use of Project Management Information Systems and Its Impact on Project Outcome
Kwete Mwana Nyandongo, Department of Applied Information Systems, College of Business and Economics, University of Johannesburg, South Africa
Jabulani Lubisi, Department of Applied Information Systems, College of Business and Economics, University of Johannesburg, South Africa
ID 452 Technical and Environmental Assessment of Lignite-fired Electricity Generation in Greece
Vassilis Dedoussis , Department of Industrial Management & Technology, University of Piraeus, Greece
ID 453 Change Management as the bridge from Operational to Organizational Excellence
Nancy Lucero Tapia Ruíz, Universidad de Monterrey, San Pedro Garza García, Nuevo León, México
Jacobo Tijerina Aguilera, Universidad de Monterrey, San Pedro Garza García, Nuevo León, México
Daniel Ulises Moreno-Sánchez, Universidad de Monterrey, San Pedro Garza García, Nuevo León, México
Josué Francisco Xavier Martínez Morales, Universidad de Monterrey, San Pedro Garza García, Nuevo León, México
Diego Andrés Martínez Treviño, Universidad de Monterrey, San Pedro Garza García, Nuevo León, México
Arlethe Yarí Aguilar-Villarreal, Universidad Autónoma de Nuevo León, San Nicolás de los Garza, Nuevo León, México
ID 454 Culture & Personality: Directional influence on Consumer Switching
Anjali Sharma, Dept. of Industrial & Management Eng., Indian Institute of Technology-Kanpur, India
R.R.K. Sharma, Dept. of Industrial & Management Eng., Indian Institute of Technology-Kanpur, India
Kuei-Kuei Lai, Department of Business Administration, Chaoyang University of Technology, Taiwan
ID 455 Efficiency analysis of public primary schools: the case of a medium-sized Brazilian city
Carlos Ernani Fries, Department of Production and Systems Engineering, Federal University of Santa Catarina, Campus Trindade, C.P. 476, Florianópolis, SC 88040-900, Brazil
Lucas Bonomini de Luna, Department of Production and Systems Engineering, Federal University of Santa Catarina, Campus Trindade, C.P. 476, Florianópolis, SC 88040-900, Brazil
Ricardo Giglio, Department of Production and Systems Engineering, Federal University of Santa Catarina, Campus Trindade, C.P. 476, Florianópolis, SC 88040-900, Brazil
ID 456 Greenhouse Gas (GHG) Emissions from Land Transports in Malaysia: Modelling and Policy Analysis
Shibli Azlan, Department of Thermo Fluids, School of Mechanical Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
Md. Mizanur Rahman, Department of Thermo Fluids, School of Mechanical Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
Hasan Mohd Faizal, Department of Thermo Fluids, School of Mechanical Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
Aminuddin Saat, Department of Thermo Fluids, School of Mechanical Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
Mazlan Abdul Wahid, Department of Thermo Fluids, School of Mechanical Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
ID 458 Use of Clean Technologies in Agribusiness in Mexico: A literature Review
Luis Rocha-Lona, ESCA Santo Tomás, Instituto Politécnico Nacional, Mexico City, Mexico
Ingrid Yadibel Cuevas-Zuñiga, ESCA Santo Tomás, Instituto Politécnico Nacional, Mexico City, Mexico
María del Roció Soto-Flores, ESCA Santo Tomás, Instituto Politécnico Nacional, Mexico City, Mexico
Jose Arturo Garza-Reyes, Centre for Supply Chain Improvement, The University of Derby, Derby, UK
Vikas Kumar, Faculty of Business and Law, University of West of England
ID 459 Transport Operations Optimisation through Lean Implementation – A Case Study
Nicha Deesrisak, Warwick Manufacturing Group, University of Warwick, Coventry, U.K.
Jose Arturo Garza-Reyes, Centre for Supply Chain Improvement, University of Derby, Derby, U. K.
Simon Peter Nadeem, Centre for Supply Chain Improvement, University of Derby, Derby, U. K.
Anil Kumar, Centre for Supply Chain Improvement, University of Derby, Derby, U. K.
Vikas Kumar, Bristol Business School, University of the West of England, Bristol, U.K.
Fernando González-Aleu, Universidad De Monterrey, San Pedro Garza García, N.L. México
Bernardo Villarreal, Universidad De Monterrey, San Pedro Garza García, N.L. México
ID 461 Minding the gap between Smart Factory Systems and sustainability performance
Bruno Gallotta, Business School, University of Derby, Kedleston Rd, Derby DE22 1GB
Polina Baranova, Business School, University of Derby, Kedleston Rd, Derby DE22 1GB
ID 462 Stylistic Design Engineering (SDE) applied to a new E-Segment sport sedan
Leonardo Frizziero, Alma Mater Studiorum University of Bologna, Department of Industrial Engineering, viale Risorgimento 2, 40136 Bologna, Italy
Giampiero Donnici, Alma Mater Studiorum University of Bologna, Department of Industrial Engineering, viale Risorgimento 2, 40136 Bologna, Italy
Nicola Maria Aprile Ximenes, Alma Mater Studiorum University of Bologna, Department of Industrial Engineering, viale Risorgimento 2, 40136 Bologna, Italy
Alessandro Seclì, Alma Mater Studiorum University of Bologna, Department of Industrial Engineering, viale Risorgimento 2, 40136 Bologna, Italy
Matteo Ticca, Alma Mater Studiorum University of Bologna, Department of Industrial Engineering, viale Risorgimento 2, 40136 Bologna, Italy
ID 463 A new SUV conceived by Stylistic Design Engineering (SDE)
Giampiero Donnici, Alma Mater Studiorum University of Bologna, Department of Industrial Engineering, viale Risorgimento 2, 40136 Bologna, Italy
Leonardo Frizziero, Alma Mater Studiorum University of Bologna, Department of Industrial Engineering, viale Risorgimento 2, 40136 Bologna, Italy
Giulio Galiè, Alma Mater Studiorum University of Bologna, Department of Industrial Engineering, viale Risorgimento 2, 40136 Bologna, Italy
Federico Lelli, Alma Mater Studiorum University of Bologna, Department of Industrial Engineering, viale Risorgimento 2, 40136 Bologna, Italy
ID 464 Stock Return Prediction Based on Some Forms of Capital Asset Pricing Model (CAPM)
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Riaman, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Alit Kartiwa, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Betty Subartini, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Jumadil Saputra, School of Social and Economics Development, Universiti Malaysia Terengganu, Malaysia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 465 Stock Assessment Using a Dividend Discount Model with Growth Rate Following a Time Series Pattern
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, UniversitasPadjadjaran, Indonesia
Dwi Susanti, Department of Mathematics, Faculty of Mathematics and Natural Sciences, UniversitasPadjadjaran, Indonesia
Isah Aisah, Department of Mathematics, Faculty of Mathematics and Natural Sciences, UniversitasPadjadjaran, Indonesia
Agus Supriatna, Department of Mathematics, Faculty of Mathematics and Natural Sciences, UniversitasPadjadjaran, Indonesia
Jumadil Saputra, School of Social and Economics Development, Universiti Malaysia Terengganu, Malaysia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 466 Problems of Demand and Effects in Portfolio Based Selection of Utility Functions
Riaman, Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Eman Lesmana, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Agus Supriatna, Department of Mathematics, Faculty of Mathematics and Natural Sciences,, Universitas Padjadjaran, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 467 Unit Link Single Life Premium Calculation for Unit Link Lifetime Insurance Using the Ratchet Compound Method
Agus Supriatna, Department of Mathematics, Faculty of Mathematics and Natural Sciences, UniversitasPadjadjaran, Jl. Raya Bandung-Sumedang KM 21,Jatinangor,Sumedang 45363, West Java, Indonesia
Nurul Gusriani, Department of Mathematics, Faculty of Mathematics and Natural Sciences, UniversitasPadjadjaran, Jl. Raya Bandung-Sumedang KM 21,Jatinangor,Sumedang 45363, West Java, Indonesia
Riaman, Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, UniversitasPadjadjaran, Jl. Raya Bandung-Sumedang KM 21,Jatinangor,Sumedang 45363, West Java, Indonesia
Darry FalihaYudha, Department of Mathematics, Faculty of Mathematics and Natural Sciences, UniversitasPadjadjaran, Jl. Raya Bandung-Sumedang KM 21,Jatinangor,Sumedang 45363, West Java, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 468 Graph Algorithm Vertex Coloring
Mochamad Suyudi, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Mustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Tembila Campus, 2200 Besut, Terengganu, Malaysia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Johor, Malaysia
ID 469 Solving Traveling Salesman Problems Using Branch and Bound Methods
Mochamad Suyudi, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Indonesia
Mustafa Mamat, Faculty of Informatics and Computing, Universiti Sultan Zainal Abidin, Tembila Campus, 2200 Besut, Terengganu, Malaysia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Johor, Malaysia
ID 470 Comparison of Double Exponential Smoothing Holt and Fuzzy Time Series Methods in Forecasting Stock Prices (Case Study: PT Bank Central Asia Tbk)
Eman Lesmana, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Jl. Raya Bandung-Sumedang KM 21, Jatinangor 45363, Sumedang, West Java, Indonesia
Nursanti Anggriani, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Jl. Raya Bandung-Sumedang KM 21, Jatinangor 45363, Sumedang, West Java, Indonesia
Sukono, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Jl. Raya Bandung-Sumedang KM 21, Jatinangor 45363, Sumedang, West Java, Indonesia
Fatimah, Department of Mathematics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Jl. Raya Bandung-Sumedang KM 21, Jatinangor 45363, Sumedang, West Java, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 472 Modelling And Mapping University Business Process
Bachtiar H. Simamora, Leader Performance Excellence Reasearch Group, Bina Nusantara University
Natalia Sonata, Bina Nusantara University
ID 473 Automatic Sawing seeds Machine
Dr.Khalid Abdullitife Ababtain, Mechanical Engineering Head Department, Yanbu, Saudi Arabia
Eng. Muhammed Ajmal, Mechanical Engineering Department, Yanbu, Saudi Arabia
ID 485 Developing a risk covering based model for locating rescue and relief centers in hazardous materials transportation (An empirical study: Guilan province of Iran)
Hamideh Baghaei Daemi, M.Sc. in Industrial Engineering, MehrAstan University, Guilan, Iran
Abbas Mahmoudabadi, Director, Master Program in Industrial Engineering, MehrAstan University, Guilan, Iran
Sedigheh Rezvani Chomachar, M.Sc. in Industrial Engineering, MehrAstan University, Guilan, Iran
ID 486 Enhance The Thermal Properties Of Poly-Propylene Polymer
Nawaf Almohamdi, A Student Department of Mechanical Engineering Yanbu, Industrial College, Yanbu, KSA
Majed Alghifari, A Student Department of Mechanical Engineering Yanbu, Industrial College, Yanbu, KSA
Khalid Alhazmi, A Student Department of Mechanical Engineering Yanbu, Industrial College, Yanbu, KSA
Saleh Alfahidi, A Student Department of Mechanical Engineering Yanbu, Industrial College, Yanbu, KSA
Ashraf M. Alghanmi, Supervisor, Mechanical and Industrial Engineering Department, Yanbu Industrial College, Yanbu, Saudi Arabia
ID 488 Assessing Critical Failure Factors for Implementing Lean Six Sigma Framework in Indian Manufacturing Organizations
Vikas Swarnakar, Department of Mechanical Engineering, National Institute of Technology, Raipur 492010, Chhattisgarh, India
Shailesh Vaidya, Department of Mechanical Engineering, National Institute of Technology, Raipur 492010, Chhattisgarh, India
Anil Kr. Tiwari, Department of Mechanical Engineering, National Institute of Technology, Raipur 492010, Chhattisgarh, India
A. R. Singh, Department of Mechanical Engineering, National Institute of Technology, Raipur 492010, Chhattisgarh, India
ID 489 Prioritizing Service Quality Factors for Polytechnic Institutions as Per Student’s Perception in the State of Madhya Pradesh, India
Pramod Kinker, Department of Mechanical Engineering, National Institute of Technology Raipur, Chhattisgarh, India
Shailesh Vaidya, Department of Mechanical Engineering, National Institute of Technology Raipur, Chhattisgarh, India
A. R. Singh, Department of Mechanical Engineering, National Institute of Technology Raipur, Chhattisgarh, India
Rajeev Jain, Department of Mechanical Engineering, Kalaniketan Polytechnic College Jabalpur, Madhya Pradesh, India
ID 490 Potential for PRIM based classification: A literature review
Rym NASSIH, AMIPS Research team – EMI, University Mohamed V, Rabat, Morocco
Abdelaziz BERRADO, AMIPS Research team – EMI, University Mohamed V, Rabat, Morocco
ID 499 Enhance the Thermal Properties of Poly-propylene
Awaf Almohamdi, Khalid Alhazmi, Majed ahmed, Saleh Alfahidi
Project Advisor: Engr. Ashraf Alghanmi
Department of Mechanical Engineering Technology
Yanbu Industrial College, Yanbu, Saudi Arabia
ID 500 A Continuous Review Inventory Model With Backorders And Equivalencies
Gözde Yazgı Tütüncü, Faculty of Arts and Sciences/Mathematics, Izmir University of Economics, Balçova, İzmir, Turkey
Elif Duymaz, Faculty of Arts and Sciences/Mathematics, Izmir University of Economics, Balçova, İzmir, Turkey
ID 501 The Impact of Learning Orientation on Innovation Performance: Mediating Role of Operations Strategy and Moderating Role of Environmental Uncertainty
Paria Jeihoony, Faculty of Economics and Management, University of Tabriz, Tabriz, Iran
Younis Jabarzadeh, Faculty of Economics and Management, University of Tabriz, Tabriz, Iran
Vikas Kumar, Faculty of Business and Law (FBL), University of the west of England Bristol, Bristol, UK
Jose Arturo Garza-Reyes, Derby Management School, University of DERBY, Derby, England
ID 508 Design, Fabrication and Testing of a 3D Printer
Mohamad Hasan Bin Tasneem, Mechanical and Industrial Engineering Department, College of Engineering, Sultan Qaboos University, Sultanate of Oman
Gamal Talal Amer, Mechanical and Industrial Engineering Department, College of Engineering, Sultan Qaboos University, Sultanate of Oman
ID 509 Multi-criteria Decision Approach to Measure Complexity Level in Supply Chain
Sujan Piya, College of Engineering, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman
Ahm Shamsuzzoha, School of Technology and Innovation, University of Vaasa, Vaasa, Finland
Mohammad Khadem, College of Engineering, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman
Mahmoud Al-Kindi, College of Engineering, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman
ID 510 Material and Energy Wastes Reduction in Steel Production through the Application of Lean Manufacturing Tools
Eman Saied, Arab Academy for Science, Technology, and Maritime Transport, College of Engineering and Technology, Industrial and Management, Engineering Department, 1029 Alexandria, Egypt
Noha M. Galal, Arab Academy for Science, Technology, and Maritime Transport, College of Engineering and Technology, Industrial and Management, Engineering Department, 1029 Alexandria, Egypt
Aziz E. El-Sayed, Arab Academy for Science, Technology, and Maritime Transport, College of Engineering and Technology, Industrial and Management, Engineering Department, 1029 Alexandria, Egypt
ID 511 Ranking of Technologies for Energy Recovery from Municipal Solid Waste in Bangladesh Using the Analytic Hierarchical Process (AHP): A Case Study
Syeda Marzia, Department of Civil Engineering, Bangladesh University of Engineering & Technology Dhaka, Bangladesh
Md Sadman Sakib, Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology Dhaka, Bangladesh
ID: 513 Scheduling of M jobs on N machines by a novel sequencing approach
Anand Bhesdadiya, Student of Industrial Engineering, Pandit Deendayal Petroleum University, Gandhinagar, India
Parth Shah, Student of Industrial Engineering, Pandit Deendayal Petroleum University, Gandhinagar, India
Dr. M. B. Kiran, Pandit Deendayal Petroleum University, Gandhinagar
ID 515 Supply Chain 4.0: A Shift in Paradigm
Mohammed Alkahtani, Industrial Engineering Department, College of Engineering, King Saud University, Riyadh-11421, Saudi Arabia, Raytheon Chair for Systems Engineering (RCSE), Advanced Manufacturing Institute, King Saud University, Riyadh-11421, Saudi Arabia
Mustufa Haider Abidi, Raytheon Chair for Systems Engineering (RCSE), Advanced Manufacturing Institute, King Saud University, Riyadh-11421, Saudi Arabia
ID 516 Handling Mercury (Hg) Waste through Utilization of Lapindo Activated Mud HCl to Realize Environmentally Friendly Gold Mining Industries
Sigit Trimayanto, Departement of Chemistry, State University of Surabaya, Surabaya, Indonesia
Rani Kurnianingsih, Departement of Chemistry, State University of Surabaya, Surabaya, Indonesia
Ade Tiyas Widyawati, Departement of Chemistry, State University of Surabaya, Surabaya, Indonesia
Laila Rezty Hertiwi, Departement of Chemistry, State University of Surabaya, Surabaya, Indonesia
ID 517 Optimization of Granite Cutting in Abrasive Water Jet Machining using Taguchi Technique
Vaibhav Jain, Industrial Engineering Department, Pandit Deendayal Petroleum University, Gandhinagar, India
Kishan Fuse, Industrial Engineering Department, Pandit Deendayal Petroleum University, Gandhinagar, India
Anand Bhesdadiya, Industrial Engineering Department, Pandit Deendayal Petroleum University, Gandhinagar, India
ID 519 Mobile Application Development: A comprehensive and systematic literature review
Hanif, SRM Institute of Science & Technology, India
Jagadeesan, SRM Institute of Science & Technology, India
Vinayak A. Drave, Indian Institute of Technology, Kanpur, India
Priyanka C Bhatt, Bennett University, Times of India Group, India
ID 527 Process View on E-Health with Risk Analysis
Michal Švehla, Faculty of Electrical Engineering, University of West Bohemia, Plzeň.
Jiří Tupa, Faculty of Electrical Engineering, University of West Bohemia, Plzeň.
ID 528 Employee Productivity Improvement & Skill Enhancement in Pharmaceutical Industry
Manan Hingorani, Pandit Deendayal Petroleum University, Gandhinagar, Gujarat, India.
Vishal Wankhede, Pandit Deendayal Petroleum University, Gandhinagar, Gujarat, India.
Nitesh Jaiswal, XYZ Pharmaceutical Industry, Ahmedabad, Gujarat, India
ID 529 An Assessment of Presence of Palm Kernel Shell Ashes and Sawdust Ashes on Strength Properties of Lateritic Soil
Timothy Laseinde, Department of Mechanical & Industrial Engineering, University of Johannesburg, RSA
Ifetayo Oluwafemi, Postgraduate School of Engineering Management, University of Johannesburg, RSA
ID 530 A Real Study-Based Modeling of Stochastic Behavior of Traffic Crash Counts Using Penalized Poisson-GzLM
Abdelmagid Hammuda, Qatar Transportation and Traffic Safety Center (QTTSC), Qatar University, Doha, Qatar.
Shaligram Pokharel, Department of Mechanical and Industrial Engineering, College of Engineering, Qatar University, Doha, Qatar.
Khalifa N. Al-Khalifa, Department of Mechanical and Industrial Engineering, College of Engineering, Qatar University, Doha, Qatar.
ID 531 Tools and Leadership Qualities for Change Implementation
Lukas Vaclavik, University of Derby, College of Engineering and Technology
ID 532 Introducing a Measurement Framework to Assess Lean Readiness Level within Emergency Departments in Kuwait
Mohamad ALNAJEM, Busies Administration Department, Gulf University for Science and Technology
ID 533 Performance and Evaluation of Perforated Bamboo as Reinforcement for Concrete
Timothy Laseinde, Department of Mechanical & Industrial Engineering, University of Johannesburg, RSA
Ifetayo Oluwafemi, Postgraduate School of Engineering Management, University of Johannesburg, RSA
ID 534 Monitoring of Simple Linear Quality Profiles Using dEWMA Statistic under Uncertainty of Process Deviations
Galal M. Abdella, Department of Mechanical and Industrial Engineering, Qatar University, Doha, Qatar
Khalifa N. Al-Khalifa, Department of Mechanical and Industrial Engineering, Qatar University, Doha, Qatar
Abdel Magid S. Hamouda, Department of Mechanical and Industrial Engineering, Qatar University, Doha, Qatar
Ala Abdul Kadir Al-Janabi, Department of computer information systems, Ahmad Bin Mohamed Military College
ID 542 Managing student technology innovations of rural engineering campuses
Malini K V, Sri Sairam College of Engineering, Viswesvaraya Technological University City, India
ID 545 Case Study: Lean and Green Technique of Manufacturing Industries
Vatsal Vaghasia, Department of Industrial Engineering, Pandit Deendayal Petroleum University, Gandhinagar, India
kishan Fuse, Department of Industrial Engineering, Pandit Deendayal Petroleum University, Gandhinagar, India
ID 550 Ergonomic Evaluation of Vehicle License Plates used in Saudi Arabia
Ahmed M. El-Sherbeeny, Industrial Engineering Department, King Saud University, Riyadh, KSA
Woo-Hyung Park, Industrial Engineering Department, King Saud University, Riyadh, KSA
ID 558 Strategic Sourcing in Manufacturing Sector: A Case of an Indian Company
Dr. Sharif, Indian Institute of Technology, Kanpur, India
Priyanka C Bhatt, Bennett University, Times of India Group, India
Sebi Khan, Indian Institute of Technolgy, Kanpur, India
Manoj Kumar, Indian Institute of Technology, Kanpur, India
Simran Singh, Office of DORA, Indian Institute of Technology, Kanpur, India
ID 561 Measuring the effect of entrepreneurial competence and social media marketing on small medium enterprises’ competitive advantage: a structural equation modeling approach
Abdul Razak Munir, Jumidah Maming, and Nuraeni Kadir, Department of Management, Faculty of Economics and Business, Hasanuddin University, Makassar, Indonesia.
Gunawan Bata Ilyas, STIE AMKOP, Makassar, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 562 Multiple Regression Analysis Of Spiritual Stimulants Increased Awareness As A Company Employee In Improving Morale
Putu Artaya Departement of Management, Universitas Narotama, Surabaya, Indonesia
ID 563 Design, Fabrication and Testing of a 3D Printer
Mohamad Hasan Bin Tasneem, Mechanical and Industrial Engineering Department, Sultan Qaboos University, Muscat, Oman
Gamal Talal Amer, Mechanical and Industrial Engineering Department, Sultan Qaboos University, Muscat, Oman
Ade Tuti Lestari, Department of Sport Education, STKIP Situs Banten, Indonesia and Department of Sport Education, Universitas Negeri Jakarta, Jakarta 13220, Indonesia
James Tangkudung and Rizki Nurulfa, Department of Sport Education, Universitas Negeri Jakarta, Jakarta 13220, Indonesia
Puji Haryanti, Magister of Sport Education, Universitas Negeri Jakarta, Jakarta 13220, Indonesia
One Laila, Department of English, STKIP Situs Banten, Serang 42121, Indonesia
Christianti Anggraini Motto, Faculty of Sport Science, Universitas Negeri Manado, Sulawesi Utara, Manado 95618, Indonesia
Dikdik Fauzi Dermawan, Faculty of Sport Science, Universitas Singa Perbangsa, Jawa Barat, Karawang 41361, Indonesia
Basyarudin Acha, Faculty of Sport Science, Universitas Samudera, Banda Aceh 24415, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 566 Model of Students’ Understanding on Thermodynamic Concepts in Learning with Virtual Labs
Gunawan, Ahmad Harjono, Hairunisyah Sahidu and Ni Made Yeni Suranti, Departmen of Physics Education, Universitas Mataram, Jln. Majapahit No 62 Mataram 83125, Indonesia
Lovy Herayanti, Physics Education Study Program, IKIP Mataram, Jln. Pemuda No 59A Mataram 83125, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 567 Model of Triple Jump Achievment: The Effect Method Learning and Motor Skills Youth 18 – 20 Age
Herli Pardilla, Achmad Sofyan Hanif, Hidayat Humaid, Mulyana and James Tangkudung, Universitas Negeri Jakarta, Sport Education Department, Jakarta Timur, Jakarta 13220, Indonesia
Jufrianis, Universitas Pahlawan, Department of Physical Education, Bangkinang, Riau 28412, Indonesia
Raffly Henjilito, Islamic University of Riau, Department of Physical Education, Pekanbaru, Riau 28284, Indonesia
Samsuddin Siregar, Universitas Negeri Medan, Department of Physical Education and Recreation, Medan 20221, Indonesia
Abdul Talib Bon, Department of Production and Operations Management, Faculty of Technology Management and Business, Universiti Tun Hussein Onn Malaysia
Isnawati Osman, Andi Reni, Ria Mardiana and Andi Nur Baumassepe, Hasanuddin University, Faculty of Economics and Business, Department of Management, Makassar, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
Jufrianis, Student of Department of Sport Education, Universitas Negeri Jakarta, Jalan Rawamangun Muka Jakarta, Indonesia and
Department of Physical Education, Universitas Pahlawan Tuanku Tambusai, Jalan Lingkar Bangkinang, Kampar, Riau, Indonesia
James Tangkudung, Hidayat Humaid, Achmad Sofyan Hanif, Firmansyah Dlis, Moch Asmawi and Widiastuti, Department of Sport Education, Universitas Negeri Jakarta, Jalan Rawamangun Muka Jakarta, Indonesia
Herli Pardilla, Department of Physical Education, Universitas Pahlawan Tuanku Tambusai, Jalan Lingkar Bangkinang, Kampar, Riau, Indonesia
Raffly Henjilito, Departement of Physical Education, Universitas Islam Riau, Jalan Kaharuddin Nasution Marpoyan, Pekanbaru, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 570 Empowerment Community in Buru Regency
M Chairul Basrun Umanailo and Rosita Umanailo, Universitas Iqra Buru, Department of Agricultural and Forestry, Maluku 97571, Indonesia
M Mukaddar and Abdul Latif Wabula, Universitas Iqra Buru, Faculty of Islamic Religion, Namlea, Maluku 97571, Indonesia
Syaiful Rachman and Lutfi Rumkel, Universitas Iqra Buru, Department of Law, Namlea, Maluku 97571, Indonesia
Riki Bugis, Universitas Iqra Buru, Department Of Literature, Namlea, Maluku 97571, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 571 Utilization of Qualitative Methods in Research Universities
M Chairul Basrun Umanailo and Iskandar Hamid, Universitas Iqra Buru, Department of Agricultural and Forestry, Namlea, Maluku 97571, Indonesia
Hamiru Hamiru, Universitas Iqra Buru, Department of Economy, Namlea, Maluku 97571, Indonesia
Sjaid S Fais Assagaf and M Bula, Universitas Iqra Buru, Department of Engineering, Namlea, Maluku 97571, Indonesia
Mansyur Nawawi, Sukainap Pulhehe and Salma Yusuf,
Universitas Iqra Buru, Department of Law, Namlea, Maluku 97571, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
Yustiqvar, Magister Program of Science Education, Universitas Mataram, Jalan Majapahit No. 62, Lombok, 83125, Indonesia
Gunawan, Department of Physics Education, Universitas Mataram, Jalan Majapahit No. 62, Lombok, 83125, Indonesia
Saprizal Hadisaputra, Department of Chemistry Education, Universitas Mataram, Jalan Majapahit No. 62, Lombok, 83125, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
Endang Noerhartati, Department of Agroindustrial Technology, Universitas Wijaya Kusuma Surabaya, Indonesia, Jl. Dukuh Kupang XXV/54 Surabaya, Indonesia and Postgraduate Student, Department of Education Management, Unesa, Surabaya, Indonesia, Jl. Kampus Ketintang, Surabaya, Indonesia
Endang Retno Wedhowati and Diana Puspitasari, Department of Agroindustrial Technology, Universitas Wijaya Kusuma Surabaya, Indonesia
Jl. Dukuh Kupang XXV/54 Surabaya, Indonesia
Abdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan Universiti Tun Hussein Onn Malaysia (UTHM) Johor, Malaysia
ID 574 Analysis of Design Product Entrepreneursip Syrup Based Purple Sweet Potato (Ipomoea batatas)
Victoria Bella Agatha, Student of the Agroindustrial Technology Department, Faculty of Engineering, Universitas Wijaya Kusuma Surabaya, Jl. Dukuh Kupang XXV/54 Surabaya, Indonesia
Endang Noerhartati, Department of Agroindustrial Technology, Universitas Wijaya Kusuma Surabaya, Indonesia, Jl. Dukuh Kupang XXV/54 Surabaya, Indonesia and Postgraduate Student, Department of Education Management, Unesa, Surabaya, Indonesia, Jl. Kampus Ketintang, Surabaya, Indonesia
Abdul Talib Bin Bon, Fakulti Pengurusan Teknologi dan Perniagaan Universiti Tun Hussein Onn Malaysia (UTHM) Johor, Malaysia
Pedro Martim Lota, Departamento de Engenharia Mecânica e Industrial, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Caparica, Portugal
Maria Henriqueta Almeida, UNIDEMI, Departamento de Engenharia Mecânica e Industrial, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Caparica, Portugal
António Grilo, UNIDEMI , Departamento de Engenharia Mecânica e Industrial, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Caparica, Portugal
ID 576 Linking Organizational Learning, Organizational Culture, and Market Orientation on Innovation Culture: A Case Study in Indonesian MSME’s
Wily Tjandera, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang-15811, Indonesia
Evo Sampetua Hariandja, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang, Indonesia
ID 577 Using the Design Thinking into Product Development Process: A Case Study in Bio-pharmaceutical Firm
Evo Sampetua Hariandja, Department of Management Faculty of Economics and Business, Universitas Pelita Harapan, Tangerang, INDONESIA
Nurafni Rubiyanti, School of Communication and Business, Telkom University, Bandung 40257, INDONESIA
Rintan Saragih, Department of Management Faculty of Economics, Universitas Methodist Indonesia, Medan 20152, Indonesia
ID 584 Model of reward system toward the performance of public sector organizations
Dewi Prastiwi, Universitas Negeri Surabaya, Department of Accounting, Surabaya, Jawa Timur 60231, Indonesia
Pujiono, Universitas Negeri Surabaya, Department of Accounting, Surabaya, Jawa Timur 60231, Indonesia
Aisyaturrahmi, Universitas Negeri Surabaya, Department of Accounting, Surabaya, Jawa Timur 60231, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 585 Factors Affecting Poverty in Lamongan
Dwi Suhartini, UPN “Veteran” Jawa Timur, Department of Accounting, Jalan Raya Gunung Anyar, Surabaya, Indonesia
Astrini Aning Widoretno, UPN “Veteran” Jawa Timur, Department of Accounting, Jalan Raya Gunung Anyar, Surabaya, Indonesia
Betty Silfia Ayu Utami, Islamic State Sunan Ampel University, Department of Economics, Jalan Ahmad Yani No.117, Surabaya, Indonesia
Agus Sukoco, Narotama University, Department of Management, Jalan AR Hakim 51, Surabaya, Indonesia
Sri Wiwoho Mudjanarko, Narotama University, Department of Civil Enginerring, Jalan AR Hakim 51, Surabaya, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 586 Implementation of Cybercrime Settlement with Indonesia Law 19/ 2016 about Information and Electronic Transactions
Enny Agustina, Kader Bangsa University, Faculty of Law, Palembang, South Sumatra, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 587 The Development of E-Assessment with Learning Management System
Sahidu, Physics Education Study Program, Universitas Mataram, Jln. Majapahit No 62 Mataram 83125, Indonesia
Gunawan, Physics Education Study Program, Universitas Mataram, Jln. Majapahit No 62 Mataram 83125, Indonesia
Herayanti, Physics Education Study Program, Universitas Mataram, Jln. Majapahit No 62 Mataram 83125, Indonesia
Indriaturrahmi, Education Technology Study Program, IKIP Mataram, Jln. Pemuda No 59 A Mataram 83125, Indonesia
Austik, Education Technology Study Program, IKIP Mataram, Jln. Pemuda No 59 A Mataram 83125, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 588 Technology CLL to Foster Student’s Speaking
Halimah Aja, Applied Linguistics Study, Postgraduate Program, Universitas Negeri Jakarta, Rawamangun Muka Jakarta Timur 13220, Indonesia
Gufran Ali Ibrahim, Universitas Khairun, Pertamina Kampus II Unkhair Gambesi, Ternate Selatan, Indonesia
Ninuk Lustyantie, Department of English Education, Faculty of Teacher Training and Education, Universitas Suryakancana
Dr. Muwardi Komplek Pasir Gede Raya Cianjur 43216 , Indonesia, Applied Linguistics, Postgraduate Program, Universitas Negeri Jakarta, Rawamangun Muka Jakarta Timur 13220, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 589 Service Quality of Patient’s Perceived Value in Private Hospital Surabaya, Indonesia
Mu’ah, Department of Management, STIE KH Ahmad Dahlan Lamongan, Jawa Timur 62251, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 590 Islamic social reporting disclosure and firm value: Empirical Study of Firms Listed in Jakarta Islamic Index
Mursalim Nohong, Hasanuddin University, Department of Management, Makassar, Sulawesi Selatan 90245, Indonesia
Muhammad Sobarsyah, Hasanuddin University, Department of Management, Makassar, Sulawesi Selatan 90245, Indonesia
Abdullah Sanusi, Hasanuddin University, Department of Management, Makassar, Sulawesi Selatan 90245, Indonesia
Sartika Handayani K, Universitas Fajar, Department of Management, Makassar Sulawesi Selatan 90231, Indonesia
Narto Irawan Otoluwa, Universitas Muslim Maros, Department of Management, Maros, Sulawesi Selatan 90512
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 591 Model of Skill Sprint 100 Meters, Experiment Study The Method of Exercise and Reaction Time on Male Students of Physical Education
Raffly Henjilito, Universitas Islam Riau, Jalan Kharuddin Nasution No 113, Pekanbaru, Riau 28284 Indonesia, Universitas Negeri Jakarta, Jalan Rawamangun Muka, Jakarta 13220, Indonesia
Moch. Asmawi, Universitas Negeri Jakarta, Jalan Rawamangun Muka, Jakarta 13220, Indonesia
James Tangkudung, Universitas Negeri Jakarta, Jalan Rawamangun Muka, Jakarta 13220, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 593 Model on Butterfly Swimming for Athletes in the Age 11-13 Years Group
Ruslan Abdul Gani, Sport Education Departement, Universitas Negeri Jakarta, Jalan Rawamangun Muka, Pulo Gadung, Jakarta 13220, Indonesia
James Tangkudung, Sport Education Departement, Universitas Negeri Jakarta, Jalan Rawamangun Muka, Pulo Gadung, Jakarta 13220, Indonesia
Firmansyah Dlis, Sport Education Departement, Universitas Negeri Jakarta, Jalan Rawamangun Muka, Pulo Gadung, Jakarta 13220, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 594 Analysis of Factors Considered in Policy Making Placement Officer in Structural Position (Studies in the Uinversity of Mataram)
Sayekti Suindyah Dwiningwarni, Darul ‘Ulum University Jombang, Department of Economics, Jl. Gus Dur 29 A, Jombang, East Java, Indonesia
Abdul Faruk, Mataram University, NTB, Magister of Management, Jl. Pendidikan No. 37, Mataram, NTB, Indonesia
Judi Suharsono, Panca Marga University, Probolinggo, Department of Accounting, Jl. Yos Sudarso 107, Dringu, Probolinggo, Indonesia
Muh. Barid Nizarudin Wajdi, STAI Miftahul Ula Nganjuk, Department of Management, Ds. Bogo, Nglawak, Kertosono, Nganjuk, East Java, Indonesia
Ali Muhajir, Islamic Darul ‘Ulum University Lamongan, Department of Management, Jl Airlangga 3, Sukodadi, Lamongan, East Java, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 595 Model of Competence and Organizational Citizenship Behaviour (OCB) on Performance of Hotel Employeees in Batam City with Organizational Commitment as Intervening Variables
Wasiman, Putera Batam University, Departement of Management, Jalan R Soeprapto Batam, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia
ID 597 Model Knowledge Fiscal Potential Impact on Economic Growth and Public Welfare of East Java, Indonesia
Achmad Daengs GS, Departement of Management, Universitas 45 Surabaya, Indonesia
Nuning Kurniasih, Faculty of Communication Sciences, Universitas Padjadjaran Bandung, Indonesia
M Mahjudin, STIAMAK Barunawati Surabaya, Indonesia
Nur Ahlina Febriati, Teknik Informatika, Universitas 45 Surabaya, Indonesia
I Dewa Ketut Ardiana, Fakultas Ekonomi Bisnis, Universitas 17 Agustus 1945 Surabaya, Indonesia
Abdul Talib Bon, Department of Production and Operations, University Tun Hussein Onn Malaysia, Malaysia