| |
Author Index |
|
|
A .Ghani, Jaharah
The Challenge in Malaysian Industries in Implementing Design of Experiment |
|
A Perumal, Puvanasvaran
Hidden Wastes in Overall Equipment Effectiveness (OEE) under the study of Maynard's Operation Sequence Technique (MOST) |
|
A. Al-Najar , Muhannad
Effect of Wire Cutting Process on the Variables of Surface Roughness |
|
A. Farouk, Hala
Network Management and Bandwidth Resource Allocation in Educational Institutions |
|
A. Rijab, Mustafa
Effect of Wire Cutting Process on the Variables of Surface Roughness |
|
A. Sheikh, Iram
Ergonomic Risk Factors for Workers in Garments Manufacturing – A Case Study from Pakistan |
|
Ab Rahman, Mohd Nizam
The Challenge in Malaysian Industries in Implementing Design of Experiment |
|
Abah, Andrew
Development of Facility Utilization Model for Use in Ajaokuta Steel Complex |
|
Abaspour, Rahim
Let a CPSO+ algorithm explore your high-quality shortest paths: an effective chaos-enhanced PSO-based strategy |
|
Abass, Abdulazim
INVESTIGATION OF PROPAGATION AND PERMEABILITY MODIFICATION OF GRAFTED BENTONITE PARTICLES IN POROUS MEDIA |
|
Abbas, Azmat
Effects of Value Stream Mapping in a Processing Industry |
|
Abbas Abdulsada , Shaymaa
Effect of Wire Cutting Process on the Variables of Surface Roughness |
|
Abbasgholizadeh Rahimi, Samira
A new risk-based dynamic approach for Prioritizing Surgical Patients' access to healthcare services |
|
Prioritization of patients with Communication Disorders |
|
Abbasi, Zahid Ali
Optimization of Loading Time of Pallets on Shifting Truck by Suggested Operating Procedure (SOP) at a Fast Moving Consumer Goods Producing Company. |
|
Abd Ghani, Rasli
Design of Single-Phase Grid-Connected Based on Dual-MPPT for Photovoltaic Generation Systems |
|
Abd Wahab, kader Ibrahim
SEMICONDUCTOR FABRICATION STRATEGY FOR CYCLE TIME AND CAPACITY OPTIMIZATION: PAST AND PRESENT |
|
Abdalkadir, Niveen
Build Up of Copper EDM Electrode by Using Galvanic Plating Process |
|
Investigation on Corrosion Behavior of The Al/SiC Nanocomposites in Sea Water |
|
Abdela, Abebayehu
Leanness Assessment for Adapting Lean Manufacturing Principles to Textile Processing |
|
Abdelgalil, Mohammed
A Discrete-Event and Agent-Based Hybrid Simulation Approach for Healthcare Systems Modeling and Analysis |
|
Abdelghfour, BOURDIM
Reduction of chatter vibrations by management of the cutting tool |
|
Abderrahmane, Bellaouar
Desalination of Seawater Research Project on the Basis of the Positive Results of Water Treatment by Magnetic Field |
|
Impact of the geometrical parameters of labyrinth seal on the efficiency of gas pumping unit |
|
Abderrahmane, MELLAK
CHARACTERIZATION AND MODELING OF RHEOLOGICAL BEHAVIOR OF A SYSTEM OF MUD A REVERSE EMULSION |
|
The environmental impact of inputs used in the vitiviniculturalsector in Algeria |
|
Abdoos, Hassan
Using Tolerated Risk for Solving Hazardous Material Routing Problem by Preemptive Goal Programming Approach |
|
Abdou, Sameh
A Discrete-Event and Agent-Based Hybrid Simulation Approach for Healthcare Systems Modeling and Analysis |
|
Abdul Aziz, Mohamed Ariff Shri
Implementation in-situ auto polishing rate optimization for chemical mechanical planarization process in semiconductor fabrication industry |
|
Solutions to ammoniacal nitrogen presence in CMP effluent from oxide process |
|
Abdul Hamid, Nor Aziati
Awareness, Implementation, Effectiveness and Future Adoption of Operational Improvement Initiatives: Survey Results |
|
Critical Success Factors of Six Sigma Implementation in Malaysian Manufacturing Industry |
|
Relationship between Human Errors in Maintenance and Overall Equipment Effectiveness in Food Industries |
|
The Development of 5s-Kaizen And Service Excellence Measurement Framework for Malaysia Private Hospitals |
|
Workplace Ergonomics and Employees' Health: A Case Study at Automotive Manufacturer |
|
Abdul Karim, Zainal Ambri
A Comparative Study of ANFIS and ANNs Models for Performance-Based Condition Monitoring of Industrial Gas Turbines |
|
Abdul Khalid, Fararishah
Analyzing the Adoption of Malaysian Standards (MS) on SME Performances: The Mediating Effects of Innovation Adoption Factors |
|
Abdul Rahim, Abdul Rahman
Knowledge Management (KM) in Human Error (HE) in Accident Prevention |
|
Abdul Rahman, Ismail
Estimation of compensation cost related to Musculoskeletal Disorder: Younger versus Older Malaysian Manufacturing Workers |
|
Abdul Rahman, Md Nizam
Copper Sheet Resistance characteristics in the production staging time limitation study between Copper Seed and Copper Electroplating in Semiconductor Wafer manufacturing |
|
Abdul Wahid, Mazlan
Renewable energy policy in Germany and Malaysia: Success factors |
|
Abdul-Rashid, Salwa Hanim
Analyzing optimization techniques in inventory models: the case of fuzzy economic order quantity problems |
|
The effect of human learning with cognitive and motor capabilities on a fuzzy EOQ model |
|
Abdulameer, Alyaa
Cost Minimization in Data Batch Processing |
|
Abdullah, Hanan
STUDENTS ATTENDANCE SYSTEM IN FACULTY OF ENGINEERING AT KING ABDULAZIZ UNIVERSITY |
|
Abdullah, Nor Hazana
The Development of 5s-Kaizen And Service Excellence Measurement Framework for Malaysia Private Hospitals |
|
Workplace Ergonomics and Employees' Health: A Case Study at Automotive Manufacturer |
|
Abdullah, Nor Suhada
Ergonomics As a Lean Manufacturing Tool for Improvements in a Manufacturing Company |
|
Abdullah, Sari
Capacitated Lot-Sizing and Scheduling with Sequence-Dependent setups in Petrochemical Plants |
|
Abdullah, Umer
Effects of Value Stream Mapping in a Processing Industry |
|
Abdulrazik, Abdulhalim
A Review of Models for Optimal Bio-products Syntheses from Oil Palm Empty Fruit Bunch (EFB) |
|
Thermochemical Processing of Biomass: Graphic User Interface Models for Costing and Material Balances |
|
Abolhallaj, Mahyar
A Review of Models for Optimal Bio-products Syntheses from Oil Palm Empty Fruit Bunch (EFB) |
|
Abotaleb, Ibrahim
Genetic Algorithms For Two-Phase Construction Dynamic Site Layout |
|
Abu Hassan Asaari, Muhammad Hasmi
Transforming green logistics practice into benefits: a case of 3PLs |
|
Acevedo, Baudilio
Improvement of the manufacturing process of the salicylic acid |
|
Achebe, Celestine
Process Variability Analysis of License Vehicle Number Plate Production in Nigeria |
|
Actina, Gita
Energy sector process control system to ensure achievement of energy efficiency targets in Latvia: a case study |
|
Management of energy efficient processes in residential and public buildings at regional level: a Case Study of Latvia |
|
adegbite, adeyemi
Anthropometric Data Variation Within Gari-frying Population |
|
adetifa, babatunde
Anthropometric Data Variation Within Gari-frying Population |
|
Adhikari, Arnab
An Efficiency and Consistency Based Approach for Selecting the Best Cricket Team |
|
An investigation into the urban bus route performance using a modified DEA Model: A case study of Kolkata bus transport |
|
Coordinating a Multi-echelon Apparel Supply Chain in the Presence of Supply and Demand Uncertainty |
|
Adogoba, Desmond S.
Yield Stability and Genotype by Environment Interaction of Fifteen Rice (Oryza Sativa L) Genotypes Evaluated under Rainfed and Irrigated Conditions in Northern Ghana |
|
Affandi Zega, Risnal
River's Rubbish Catcher Machine (RRC-Machine), The Planning of A Machine Instrument To Catch The Rubbish In the River Towards Healthy Environment |
|
Afzal, Farzana
Valued Supply Chain: The imminent Frontier For Improved Hospital Management |
|
Agarwal, Rupali
On the Energy detection of unknown signals over fading channel for different diversity combining techniques |
|
Agrawal, Anil Kumar
Heterogeneous Vehicle Routing Problem in a Supply Chain |
|
AGRAWAL, SHILPA
ANALYZING THE EFFECT OF LINE-CELL CONVERSION ON MANUFACTURING SYSTEMS |
|
Agwa-Ejon, John
The Delphi technique: A credible research methodology |
|
Ahadiat, Mohammad Reza
Design of control system for Electric Power Steering in vehicle |
|
Ahamed, Raihan
Conversion of Waste Plastics into Gasoline and Diesel |
|
AHMAD, Ali
Human Error in Multitasking Environments |
|
Ahmad, Anuar Fadzil
Copper Sheet Resistance characteristics in the production staging time limitation study between Copper Seed and Copper Electroplating in Semiconductor Wafer manufacturing |
|
Ahmad, Md Fauzi
Critical Success Factors of Six Sigma Implementation in Malaysian Manufacturing Industry |
|
The Relationship between Leadership Styles and Quality Management Practices in Malaysian Manufacturing Firms |
|
Ahmad, Rosmaini
Diverse Possibility of Fit Manufacturing Principle Into Value Stream Mapping(VSM) and Its Impact: A Review |
|
Productivity Assessment Based on Different Perspectives in Industries: A Review |
|
Ahmed, Faran
Fuzzy Extent Analysis: Comparison of Defuzzification Methods |
|
Ahmed, Jaleel
Investigation of Trade Credit Patterns in Effect with Bank Loan Availability |
|
Ahmed, M. Mansoor
Effect of Heating on the Impedance of NiPc based Organic Field Effect Transistor |
|
Ahmed, Rocksana
Rework Impact on BIW Production System Optimization Using Six Sigma Analysis |
|
Ahmed, Shamsuddin
A review on photosynthetic bioenergy utilizing CO2 from plant flue gas: an approach on microalgae based third generation biofuels production |
|
Aijazuddin, Muhammad
"Performance Evaluation"&"Problems Identifications in Warehouses" OF THIRD-PARTY Logistics |
|
Aimdate, Kritsana
The Impact of Structure of Interdependence on Supplier Performance in the Local Pineapple Processing Supply Chain in Thailand: a Mixed Method Research |
|
Aisha, Atya
Evaluating the Location of Effective Product Advertising on Facebook Ads |
|
Ait Kadi , Daoud
A new risk-based dynamic approach for Prioritizing Surgical Patients' access to healthcare services |
|
Prioritization of patients with Communication Disorders |
|
Ajayi, Oluseyi
Development of Facility Utilization Model for Use in Ajaokuta Steel Complex |
|
Process Variability Analysis of License Vehicle Number Plate Production in Nigeria |
|
Aji, Dimas
Evaluating the Location of Effective Product Advertising on Facebook Ads |
|
Akbar, Usama
Effects of Value Stream Mapping in a Processing Industry |
|
Akbari, Razieh
Developing a cost-effective model for evaluating the efficiency of weigh in motion system |
|
Akhter, Salma
Conversion of Waste Plastics into Gasoline and Diesel |
|
FIRE SAFETY AND AVAILABILITY OF FIRE FIGHTING EQUIPMENT IN SELECTED GARMENT FACTORIES IN BANGLADESH |
|
Akram, Shahzain
Consideration of economics and ergonomics aspects in the design and manufacturing of Hydraulic Floor crane |
|
Aksakal, Erdem
Green Supplier Selection under Risk Assessment |
|
Aksakalli, Vural
Disambiguation Points Sampling Heuristic for the Stochastic Obstacle Scene Problem |
|
Performance Evaluation of an Exact Method for the Obstacle Neutralization Problem |
|
Al Amoudi, Abrar Saeed
Optimizing the Final Exam Scheduling Process at King Abdulaziz University |
|
Al Hasani, Rashid
Designing Personalized Tourism Packages for Oman Tourism Industry |
|
Al Kindi, mahmood
Decision Analysis View of Higher Education Planning Activities of Admission and Resources Allocation. in Oman |
|
Al Maimani, Abdulwahab
Designing Personalized Tourism Packages for Oman Tourism Industry |
|
Al Mamari, Amur
Designing Personalized Tourism Packages for Oman Tourism Industry |
|
Al Sudani, Gazal
A Taguchi-Continuous Simulation Approach to the Injection Molding Blowing Process Quality Improvement |
|
Al-Dairi, Jasim
Development of an Expert System for the Feasibility Assessment of Renewable Energy Projects |
|
Al-Daoud, Zuhair
Optimization of Excess and Waste of Closed Loop Supply Chain System by Using Fuzzy Model |
|
Al-Saleh, Mohammed
Modified Cluster Boundary Search Technique for Improved Layout Designs |
|
Alam, Jahangir
Save water to save our next generation |
|
Alam, Mohammad Tauhidul
A Model of a Secured Smart e-Health System |
|
Alam Talikder, Mahmmad Mahbub
Burn Accident related Injuries and Disabilities among the RMG Women Workers: A Case Study of Tazreen Garments Trazedy |
|
Alamanda, Dini Turipanam
Application System for Smart Supply Chain Management (SCM): Case Study of SMEs in Indonesia |
|
Alauddin, Nurul Hanisah
INVESTIGATION OF PROPAGATION AND PERMEABILITY MODIFICATION OF GRAFTED BENTONITE PARTICLES IN POROUS MEDIA |
|
Alavifar, Seyed Amirhossein
Analyzing the Success Rate of Strategic and Tactical Economic Sanctions; A strategy for Russian economic planning |
|
Developing a Risk Based Maintenance; A Case study - Low Density Polyethylene (LDPE) production unit of Amir Kabir Petrochemical complex in Iran |
|
Albarune, Abu Raihan Bhuiyan
Valued Supply Chain: The imminent Frontier For Improved Hospital Management |
|
Aleideh, Basel
Statistical Analytical Study of Traffic Accidents and Violations in the State of Kuwait and its Social and Economic Impact on the Kuwaiti Society |
|
ALGIN, Ramazan
Performance Evaluation of an Exact Method for the Obstacle Neutralization Problem |
|
Alharbi, Khawlah
STUDENTS ATTENDANCE SYSTEM IN FACULTY OF ENGINEERING AT KING ABDULAZIZ UNIVERSITY |
|
Alhashimi, Lamees
Optimizing the Final Exam Scheduling Process at King Abdulaziz University |
|
Ali, Ahad
Manufacturing cell layout improvement using Simulation Modeling and Group Technology |
|
Predicting Seasonal Demand with Bayesian Generalized Linear Model |
|
Ali, Ashraf
A Prospective Solution for Consistent Aerostatic Lift for a Hybrid Buoyant Aircraft |
|
Ali, Intizar
An investigation into the impact of advance manufacturing technologies implementation in SMEs manufacturing plastic packaging products- A case study of Pakistan |
|
Ali, Md. Kawsar
Save water to save our next generation |
|
Ali, Md. Liakot
A Model of a Secured Smart e-Health System |
|
Development of a Computer Aided Learning Tool for PIC Microcontroller |
|
Ali, Naqash
The Effect of Perceived Self-Efficacy and Product Comparisons on Outcome Expectancy of Portable Multi-Screens |
|
Ali, Qasim
CUSTOMER ORDERS PRIORITIZATION USING TOPSIS IN MULTI BUSINESS CHANNEL ENVIRONMENT |
|
Ali, Shahid
AHP-Based Conceptual Model for Selection of Key Elements for Safety Culture Using SMART Criteria |
|
Ali, Shamir
"Performance Evaluation"&"Problems Identifications in Warehouses" OF THIRD-PARTY Logistics |
|
Ali, Zulfiqar
Deployment of Virtualization Technology for Higher Engineering Education Data Communication Laboratory |
|
Design, Connection, Configuration and Testing of a Mini Data Center for Higher Engineering Technology Institute Lab |
|
Aliabadi, Ehsan
Developing a Risk Based Maintenance; A Case study - Low Density Polyethylene (LDPE) production unit of Amir Kabir Petrochemical complex in Iran |
|
Aljawi, lujain
Optimizing the Final Exam Scheduling Process at King Abdulaziz University |
|
ALKAHTANI, MOHAMMED
Human Error in Multitasking Environments |
|
Alkaya, Ali Fuat
Disambiguation Points Sampling Heuristic for the Stochastic Obstacle Scene Problem |
|
Performance Evaluation of an Exact Method for the Obstacle Neutralization Problem |
|
ALLIA, Khedidja
Trends in engineering education: Programs' content, implementation to meet current challenges. |
|
Almaktoom, Abdulaziz T.
Reliability-based Robust Design Optimization of Dynamic Supply Chain Network |
|
Almonayirie, Waleed
An Innovative Holistic Approach to Optimal Portfolio Management |
|
alrashan, abdalla
Normative Gripping Strength data and its Distribution among Middle Eastern Teenage and Young Adults |
|
Alshahrani, Saad
Hospital-Supplier Integration: an Assessment of the Driving Factors in the Context of the Saudi Arabian Healthcare System |
|
Altarazi, Safwan
A Taguchi-Continuous Simulation Approach to the Injection Molding Blowing Process Quality Improvement |
|
Althomali, Raed
Deployment of Virtualization Technology for Higher Engineering Education Data Communication Laboratory |
|
Alzahrani, Mohammed
Expert System Model Structure for Feasibility Study Using Strategic Planning and Systems Engineering Principles |
|
Amadi-Echendu, Joe
A bibliographic review of trends in design and management of electrical power transmission transformers |
|
An empirical review of equipment replacement challenges in an electricity distribution network |
|
Amaya, Rene
Assessing the effect of implementing a port community system platform in the response time of an international terminal: the case of a multi-cargo facility at the Colombian Caribbean coast |
|
Quick methodology based in the SCOR model for supply chains reengineering of international trade |
|
ameri, hakimeh
Knowledge extraction from TB patients- A hybrid model with clustering and decision tree |
|
Amin, Mohamed
Component Rating Optimization Methodology for the Protection of Photovoltaic Solar Power System Components from Shading Effect |
|
Amir, Muhammad
"Performance Evaluation"&"Problems Identifications in Warehouses" OF THIRD-PARTY Logistics |
|
Amjad, Asim
Ergonomic design of workstation for a labeling task |
|
Ergonomic Risk Factors for Workers in Garments Manufacturing – A Case Study from Pakistan |
|
Ammara, Ume
The Effect of Perceived Self-Efficacy and Product Comparisons on Outcome Expectancy of Portable Multi-Screens |
|
ANAND, AKSHAY
ANALYZING THE EFFECT OF LINE-CELL CONVERSION ON MANUFACTURING SYSTEMS |
|
ANASS, CHERRAFI
Critical Success Factors of Implementing Green Lean Six Sigma |
|
Production Management Model Integrating Green and Lean Six Sigma |
|
Anderazak, HAMAMA
The environmental impact of inputs used in the vitiviniculturalsector in Algeria |
|
Andika, Aditya
Supply Chain Risk Management in the Indonesian Flavor Industry: Case Study from a Multinational Flavor Company in Indonesia |
|
Anggadwita, Grisna
Application System for Smart Supply Chain Management (SCM): Case Study of SMEs in Indonesia |
|
Applying the Analytical Hierarchy Process to Determine Upstream Competitiveness for Wedding-Planning Industry |
|
Anggawisnu, Bayuardi
Musculoskeletal Disorders Among Caregivers in Nursing Home |
|
Angkasith, Vorapoch
Creating shared value: How to guide for the Royal Project area |
|
Developing for Sustainable Lanna Cultural Tourism Area |
|
Firm's Policy Management by using ERP system |
|
Animah, Isaac
Development of a condition index matrix to support technical feasibility of life extension in the offshore oil and gas industry |
|
Anjani, Shabila
Designing Laptop Based On Costumer Preference Using ECQFD and TRIZ Methods |
|
Anjomshoae, Ali
Effect of Information Sharing and Capacity Adjustment on Healthcare Service Supply Chain: The Case of Flood Disaster |
|
Ansari, Muhammad Zulfiqar
Optimization of Loading Time of Pallets on Shifting Truck by Suggested Operating Procedure (SOP) at a Fast Moving Consumer Goods Producing Company. |
|
Aoki, Katsuki
Proposed Lean Sustained Factors |
|
Aouissi, Mokhtar
Impact of the geometrical parameters of labyrinth seal on the efficiency of gas pumping unit |
|
Aqib, Muhammad
Effects of Value Stream Mapping in a Processing Industry |
|
Areejit, Suwilai
Automatic Screening Unqualified Result in Emotional Quotient Test |
|
Intelligent Risk Prediction Method for Risk Management Planning |
|
Aremu, Olateju
Anthropometric Data Variation Within Gari-frying Population |
|
Ariff, Tasnim Firdaus
Low Energy and Low Cost Freshwater Production by Membrane Distillation |
|
Minimum Quantity Lubrication in Micromachining: A Greener Approach |
|
Ariningsih, Paulina
Understanding the Impulsiveness Effect of a Web Design on Online Fashion Stores |
|
Ariyanti, Fransisca Dini
Supply Chain Risk Management in the Indonesian Flavor Industry: Case Study from a Multinational Flavor Company in Indonesia |
|
Arrighini, Giacomo
YOUR OPINION MATTERS: A CROSS-SECTIONAL STUDY ON HAPPINESS AMONG OLDER ADULTS IN SIBERIA |
|
Arsalan, Muhammad
Globalization of Logistics and Supply Chain Management |
|
Project Management: A Complete Paradigm for Pakistani Public and Private Educational Institutions |
|
Arshad, Muhammad
Scheduling of Three FMS Layouts Using Four Scheduling Rules |
|
Asawarungsaengkul, Krisada
An Analysis on Process Parameters of Solder Jet Bonding to Increase the Shear Strength of Solder Joint in HGA |
|
An Artificial Bee Colony Algorithm for the Vehicle Routing Problem with Backhauls and Time Windows |
|
An Improvement on Shear Test Equipment for HGA and GR&R Analysis in a Magnetic Head Operation |
|
Asgari, Mehrnaz
Multi-server Congested Location Allocation Problem with Multiple Objectives |
|
Ashaari, Hasbullah
Development of Comprehensive WIP Performance Monitoring Systems for Semiconductor Fabrication Foundry |
|
Ashraf, Maria
Ergonomic Risk Factors for Workers in Garments Manufacturing – A Case Study from Pakistan |
|
Asmelash, Zerihun
Challenges of wastewater discharge and techniques for treatment: a review |
|
Asokan, Keerthika
A Survey Of Routing Protocols Of Wireless Sensor Network With Mobile Sinks |
|
Asrar, Waqar
A Prospective Solution for Consistent Aerostatic Lift for a Hybrid Buoyant Aircraft |
|
Asress, Tariku Achamyeleh
Aerodynamic Optimization of NACA64A410 Blade Aerofoil for Small Wind Turbine Application with Ansys Fluent |
|
Astuti, Yuhana
Application System for Smart Supply Chain Management (SCM): Case Study of SMEs in Indonesia |
|
Applying the Analytical Hierarchy Process to Determine Upstream Competitiveness for Wedding-Planning Industry |
|
Attia, Ahmed
Improving the manufacturing performance by using the appropriate purchasing strategy |
|
Austria, Eunice
Competitive Revenue Management Model Using Dynamic Pricing for Theater Seats Management |
|
Avendano, Gerardo
Improvement of the manufacturing process of the salicylic acid |
|
Awadalla, Medhat
Prediction of Oil Well Flowing Bottom-hole Pressure in Petroleum Fields |
|
Awang, Ahmad Termizi
Solutions to ammoniacal nitrogen presence in CMP effluent from oxide process |
|
Ayu, Ketut
Research on BRT Driver Jakarta Fatigue Evaluation |
|
Aziz, Muhammad Haris
Application Of Concurrent Engineering For Collaborative Learning And New Product Design |
|
CUSTOMER ORDERS PRIORITIZATION USING TOPSIS IN MULTI BUSINESS CHANNEL ENVIRONMENT |
|
AZIZAN, AZLINNA
Performance Measurement System and Business Performance Measurement System: A Comparative Study |
|
Azizmohammadi, Roozbeh
Using Tolerated Risk for Solving Hazardous Material Routing Problem by Preemptive Goal Programming Approach |
|
B, Justus Rabi
Performance Analysis of Different Controller for PEMFC Fed Adjustable Speed Drives |
Top |
B, Manoj
Industrial Data Communication- PLC and External Application |
|
B K, GNANAVEL
Numerical Modelling and Optimization of Square Microneedle Array for Efficient Transdermal Drug Delivery |
|
B. Md. Amin Hamzas, Mohd Fidzwan
Productivity Assessment Based on Different Perspectives in Industries: A Review |
|
Backhouse, Christopher
Activating Organizational Learning Capabilities through Service Operations Design |
|
Re-shoring Manufacturing through the application of Additive Technologies |
|
Bacudio, Lindley
Application of Monte Carlo Analytic Hierarchical Process (MCAHP) in the Prioritization of Theme Park Service Quality Elements |
|
Competitive Revenue Management Model Using Dynamic Pricing for Theater Seats Management |
|
Bade, Jitendra
Design and Development of Drilling Jig for Spinning Rings used in Textile Industry |
|
Bahar, Rubina
Low Energy and Low Cost Freshwater Production by Membrane Distillation |
|
Minimum Quantity Lubrication in Micromachining: A Greener Approach |
|
Baihaqi, Imam
Two-level Supply Chain with Extended Warranty in Competitive Market Environment |
|
Bajkhaif, Batool
STUDENTS ATTENDANCE SYSTEM IN FACULTY OF ENGINEERING AT KING ABDULAZIZ UNIVERSITY |
|
Bakar, Abu
"Performance Evaluation"&"Problems Identifications in Warehouses" OF THIRD-PARTY Logistics |
|
BALAKRISHNAN, NIVEDHA
FABRICATION OF FRACTURE AID USING RAPID PROTOTYPING |
|
Balares, Kevin Kristoffer
Effects of Different Interruptions While Driving for Field Independent and Dependent Individuals |
|
BALKHAIR, SUNDUS
STUDENTS ATTENDANCE SYSTEM IN FACULTY OF ENGINEERING AT KING ABDULAZIZ UNIVERSITY |
|
Banthia, Gaurav
Optimal Aggregate Production Planning by using Genetic Algorithm |
|
banthia, gaurav
Rework Reduction in KHS machinery Pvt. Ltd. |
|
Banzon, Mc Joren
Application of Monte Carlo Analytic Hierarchical Process (MCAHP) in the Prioritization of Theme Park Service Quality Elements |
|
Bappy, Mohammad Jabed Perves
Low Energy and Low Cost Freshwater Production by Membrane Distillation |
|
Barysheva, Galina
YOUR OPINION MATTERS: A CROSS-SECTIONAL STUDY ON HAPPINESS AMONG OLDER ADULTS IN SIBERIA |
|
Baseer , Majid
Globalization of Logistics and Supply Chain Management |
|
Project Management: A Complete Paradigm for Pakistani Public and Private Educational Institutions |
|
Basu, Sumanta
An investigation into the urban bus route performance using a modified DEA Model: A case study of Kolkata bus transport |
|
Reliable capacitated facility location problem: SAA based approach |
|
BATRA, RUSHIL
Application of Fuzzy Logic and Fuzzy Systems in Machining: A Literature Review |
|
Grey fuzzy optimization of cutting parameters on Material Removal Rate and Surface Roughness of Aluminium |
|
BAYRAKTAR, Demet
Applying the Principles of Lean Management to the Radiology Department |
|
Behrani, Paras
Association Between Psychosocial factors with upper-musculoskeletal disorders: An academic review |
|
BELHADI, Amine
Road Map for the Implementation of Lean production tools in SMEs |
|
Bellamine, Fethi
Sensitivity Analysis in Optimization of Multiple Cyclone Arrangements |
|
Stochastic Dynamic Optimization of Engineering Processes |
|
BEN CHEIKH, Souhir
Manufacturing configuration selection under arduous working conditions: A multi-criteria decision approach |
|
BEN-AYED, Omar
Class-Time Utilization in Business Schools in Tunisia |
|
Benarto, Clara
Literature review of Physical Delivery Service Quality : type of research and research gap |
|
Beng Joo, Thung
Enabling CMOS 0.13µm technology at 0.18um equipment platform on 200mm Semiconductor Manufacturing Industry |
|
Benhida, Khalid
Critical Success Factors of Implementing Green Lean Six Sigma |
|
Production Management Model Integrating Green and Lean Six Sigma |
|
BENMOUNAH, Amar
Alternative solution for the pipeline transport of viscous oil using the heaters in pumping stations. |
|
BENYOUNES, Khaled
CHARACTERIZATION AND MODELING OF RHEOLOGICAL BEHAVIOR OF A SYSTEM OF MUD A REVERSE EMULSION |
|
Bhardwaj, Prabhas
Assessing Customer Requirements and Preferences for a Perishable Product: A Case of an Indian Cooperative Dairy |
|
Heterogeneous Vehicle Routing Problem in a Supply Chain |
|
Optimization Model for Advertisement Decision A Case of Cooperative Dairy |
|
Bhaskaran, Harinivas
Improving Indian Healthcare using Data Mining |
|
Bhatti, Aamer Iqbal
Various Techniques to Design Controllers for Single Link Flexible Arm |
|
bhavashi, dharmil
Rework Reduction in KHS machinery Pvt. Ltd. |
|
Bhortake, Rupesh
: Enhancement of tube and tube Heat exchanger with semispherical hollow baffle for counter flow |
|
BHUSHAN, CHAITANYA
ANALYZING THE EFFECT OF LINE-CELL CONVERSION ON MANUFACTURING SYSTEMS |
|
Bin Abd Majid, Mohd Amin
Prediction Of Failures By Using Crow/AMSAA Model In Microsoft Excel |
|
Bin Abd Manap, Nurulfajar
Enabling CMOS 0.13µm technology at 0.18um equipment platform on 200mm Semiconductor Manufacturing Industry |
|
Bin Raja Ghazilla, Raja Ariffin
The effect of human learning with cognitive and motor capabilities on a fuzzy EOQ model |
|
Binti Salehuddin, Fauziyah
Enabling CMOS 0.13µm technology at 0.18um equipment platform on 200mm Semiconductor Manufacturing Industry |
|
Bisi, Arnab
An Efficiency and Consistency Based Approach for Selecting the Best Cricket Team |
|
Coordinating a Multi-echelon Apparel Supply Chain in the Presence of Supply and Demand Uncertainty |
|
Biswas, Indranil
An investigation into the urban bus route performance using a modified DEA Model: A case study of Kolkata bus transport |
|
Biswas, M H A
Optimal Control Applied to Dynamic Model of Climate Change: A Bangladesh Scenario |
|
Bogner, Eva
Enhanced Organizational Ambidexterity in Electronics Manufacturing through the Automation of Production-Related Processes |
|
Bon, Abdul Talib
Applying Fuzzy Inference System Tsukamoto for Decision Making in Crude Palm Oil Production Planning |
|
Assembly Line Optimization using Arena Simulation |
|
Bondi, Alessandro
Supporting Decisions on Industrial Plant Modularization: A Case Study Approach in the Oil and Gas Sector |
|
Bonilla Enriquez, Gladys
Model for Estimation of Interurban Passenger Transportation Scheme |
|
Model of Logistics Management of the Supply Chain (LMSC) to Improve the Production Sector of Perishable Food Integrated by Small and Medium Enterprises in Mexico |
|
On the Situation of Traditional Textile Producers in Mexico: General Overview for Supply Chain Improvements |
|
Boon, Liew Kai
Relationship between Human Errors in Maintenance and Overall Equipment Effectiveness in Food Industries |
|
Boonmee, Chawis
Application of MFCA and ECRS in Waste Reduction: A Case Study of Electronic Parts Factory |
|
Boonsothonsatit, Kanda
Causal Linkage-based Strategic Map Design along the Robotics and Automation Supply Chain in Thailand |
|
Industrial Logistic Performance Evaluation: A Case of Printing and Packaging Company in Thailand |
|
Bosaletsi, Ouma
An empirical review of equipment replacement challenges in an electricity distribution network |
|
bourareche, mouloud
Modi?ed Barrier and Operational Risk Analysis using Bayesian approach: Towards Bayesian–BORA methodology |
|
Bourebia, Mounira
Effect of inclination of the walls mold on the primary cooling during the continuous casting |
|
Study of surface quality - Effect of fractal dimension and texture parameters |
|
Brandmeier, Markus
Ontology-Based User Guidance for Energy Efficiency Optimization Measures |
|
bt Abdul Halim, Nur Fadhlina
Mean-Variance Portfolio Optimization on Some Stocks By Using Non Constant Mean and Volatility Models Approaches |
|
Buabuthr, Suwaphit
Industrial Logistic Performance Evaluation: A Case of Printing and Packaging Company in Thailand |
|
Bujwa, Muhummad
Temperature Distribution using Zone Models for Radiative Sections of Fired Process Heaters |
|
Burcar Dunovic, Ivana
Megaproject case studies: a stakeholder management perspective |
|
Burhani, Nurul Rawaida Ain
A Novel Multi-Objective and Multi-Criteria Decision Support System for Logistic Management during Flood Disaster |
|
Application of Logistic Regression in Resolving Influential Risk Factors Subject to Corrosion Under Insulation |
|
Bursheh, Anita
A Taguchi-Continuous Simulation Approach to the Injection Molding Blowing Process Quality Improvement |
|
butuner, hakan
Applying the Principles of Lean Management to the Radiology Department |
|
Systematic Competency Based Training Needs Analysis |
|
Caballero-Morales, Santiago-Omar
Contour Approach for Analysis of Minimum Regions for the Economic Statistical Design of X-bar Control Charts |
Top |
Model for Estimation of Interurban Passenger Transportation Scheme |
|
On the Situation of Traditional Textile Producers in Mexico: General Overview for Supply Chain Improvements |
|
Cagno, Enrico
Addressing Supply Chain Configuration Practices: Evidence from Italian Best Performer Valve Suppliers for the Oil & Gas Industry |
|
Caldwell, Eldon
A new heuristic algorithm to solve product-service mix analysis in mobile bottleneck enviroments with shared resources based on GTBM method |
|
Caliskan, Emre
Green Supplier Selection under Risk Assessment |
|
Carvalho, Maria
Improving organizations performance through Supply Chain Quality Management practices |
|
Casati, Fabio
YOUR OPINION MATTERS: A CROSS-SECTIONAL STUDY ON HAPPINESS AMONG OLDER ADULTS IN SIBERIA |
|
Ceyhan, Elvan
Performance Evaluation of an Exact Method for the Obstacle Neutralization Problem |
|
Chaijaruwanich, Anirut
Effect of Sintering Temperature on Hydroxyapatite Compact Scaffold Characteristics |
|
Chaiwongbud, Thaneeya
Asssessment of Thai Check Point for Border Trade Operations |
|
Chan, Caroline
Hospital-Supplier Integration: an Assessment of the Driving Factors in the Context of the Saudi Arabian Healthcare System |
|
Chan, CHEE-MING
Engineering Postgraduate Students' Perspective on Their Preparedness for the Job Market: Employability Attributes |
|
Chan, Shiau Wei
Critical Success Factors of Six Sigma Implementation in Malaysian Manufacturing Industry |
|
Implementation of Fuzzy Inference System For Production Planning Optimisation |
|
The Relationship between Leadership Styles and Quality Management Practices in Malaysian Manufacturing Firms |
|
Chandra, Deepak
VALUE CHAIN OPTIMIZATION IN OVERSEAS PROCUREMENT |
|
VALUE CHAIN OPTIMIZATION IN OVERSEAS PROCUREMENT USING LPP |
|
Chandrakumar, Chanjief
Fuzzy AHP based Multi-Criteria Decisions Support System for Eco-Design |
|
Selecting the best layout for the container terminal using Modeling and Simulation Techniques |
|
Chang, Elizabeth
In-house Crowdsourcing-based Entity Resolution using argumentation: Issue of Common Names |
|
Next Generation of Interactive contact centre for efficient customer recognition |
|
Chatterjee, Debdeep
Using Multiple Criteria Approach to Evaluate Risks associated with Supply Chain Sustainability |
|
Chattinnawat, Wichai
Application of Material Flow Cost Accounting Analysis to Increase Pajama Production Efficiency: A Case Study of Confederate International Co., Ltd. |
|
The Limitation of MFCA-based Cost Analysis for Serial Manufacturing Process with Sampling Scheme |
|
??????????????????????????????????????????????????????????????????????????????????: ????????? ?????? ???????????????????????????????? ????? Application of Material Flow Cost Accounting Analysis to Increase Pajama Production Efficiency: A Case Study of Con |
|
chaudhary, Kuldeep
A study on the Profitability Analysis of Power Grid Corporation of India Ltd |
|
Optimal promotional policy for a new product in presence of firm's goodwill in Segmented Market: A control theoretic Approach |
|
CHE ANI, MOHD NORZAIMI
Solving Quality Issues in Automotive Component Manufacturing Environment by utilizing Six Sigma DMAIC Approach and Quality tools |
|
Che Daud , Mohd Radzi
A Critical Assessment of Prevailing Models for Measuring Lean Manufacturing |
|
Relationships of Lean, Green Manufacturing and Sustainable Performance: Assessing the Applicability of the Proposed Model |
|
Che Ismail, Mokhtar
Application of Logistic Regression in Resolving Influential Risk Factors Subject to Corrosion Under Insulation |
|
Chiba, Eishi
Performance evaluation of a heuristics for the prize collecting Steiner tree problem |
|
Chien, Ying Che
Determination of Burn-in Period Based on Reliabality Target for Product Failure Time with Weibull Distribution |
|
Chik, Mohd Azizi
SEMICONDUCTOR FABRICATION STRATEGY FOR CYCLE TIME AND CAPACITY OPTIMIZATION: PAST AND PRESENT |
|
The Influence of Industrial Engineering in Semiconductor Fabrication Factory Optimization |
|
CHINGONO, TATENDA TALENT
Creating shared value in South Africa. A case study of Rustenburg and Emahlahleni regions |
|
Waste management for sustainable development in industrial parks. A case study of Wadeville industrial area, Johannesburg |
|
Chitsaz, Ehsan
How Team Allocate the Resource; A Model of Escalation of Commitment in Competitive Situation |
|
The Effect of Perceived Self-Efficacy and Product Comparisons on Outcome Expectancy of Portable Multi-Screens |
|
The Psychology of the Competition in High-Tech Industries |
|
Chiu, Maxwell
The history and development of six sigma quality management |
|
Cho, Hyunha
Composition Methodology for Optimal Portfolio and Performance Measures Considering Indian SENSEX |
|
Composition Methodology for Optimal Portfolio and Performance Measures Considering Indian SENSEX |
|
Choi, Chel-Jong
Microstructural and Electrical properties of Screen-printed N+ Emitter of P-type Monocrystalline Silicon Solar cell |
|
Chompu-inwai, Rungchat
Application of Lean Manufacturing Concepts to Reduce Manufacturing Lead Times within the Meatball Production Process |
|
Choomrit, Ninlawan
A Study of Green Procurement Practices: A Case Study of the Computer Parts Industry in Thailand |
|
Chutima, Parames
APPLICATION OF THE SIX-SIGMA CONCEPT TO TIME REDUCTION FOR RESIN RECIRCULATE RINSE IN DEMINERALIZED WATER PRODUCTION |
|
IMPROVEMENT OF MASTER PRODUCTION PLANNING IN A SEMI-CONDUCTOR MANUFACTURER |
|
Chuttur, Mohammad
Emotional Intelligence in COCOMO II for Software Cost Estmation |
|
Coulibaly, Amadou
System of decision-making assistance for the recycling manufactured products. |
|
Dabwan, Abdulmajeed
Determining the Effect of Key Process Parameters on Forming Force of Single Point Incremental Sheet Metal Forming |
Top |
DABWAN, Abdulmajeed
Human Error in Multitasking Environments |
|
DAOUD , Abdelnaser
Determining the Effect of Key Process Parameters on Forming Force of Single Point Incremental Sheet Metal Forming |
|
Dapeng, Liang
How Team Allocate the Resource; A Model of Escalation of Commitment in Competitive Situation |
|
The Psychology of the Competition in High-Tech Industries |
|
DARISI VENKATA, MANIDHAR
An Integrated Multi-Echelon Stochastic Supply Chain Production-Distribution Model With Carbon Emissions |
|
An Intelligent feature based process planning for Rotational parts |
|
DARMOUL, Saber
Human Error in Multitasking Environments |
|
Manufacturing configuration selection under arduous working conditions: A multi-criteria decision approach |
|
Risk issues in facility layout design |
|
Darom, Noraida Azura
Disruption recovery of two-stage serial supply chain with consideration of carbon emission cost |
|
Integration of economic and environmental aspects in sustainable supply chain management: a review |
|
Daus, Denis
A Build-or-Lease Case Study for a Potential New Warehouse Due To Increasing Storage Capacity Requirements |
|
Davis, Boyd
Debottlenecking of Conventional Copper Smelters |
|
Dechvichankit, Gulputt
Developing for Sustainable Lanna Cultural Tourism Area |
|
Deeying , Jakawat
An Analysis on Process Parameters of Solder Jet Bonding to Increase the Shear Strength of Solder Joint in HGA |
|
Dehghani, Mohammad Ali
Priority Determination of the Renewable Energies Using Fuzzy Group VIKOR Method; Case Study Iran |
|
DEVADAS, SAANDILIAN
Remote Global Alignment Error for Pad Inductor Layer To Improve The Cycle Time |
|
DEVARAJ, KANNAN
EFFICIENT AUTHENTICATION METHOD USING SCORE LEVEL FUSION AND PARTICLE SWARM OPTIMIZATION (PSO) OF MULTIMODAL BIOMETRICS |
|
Transportation of Organs using UAV |
|
Dharmawardhana, Mahanama
Decision support framework for the Sustainability of Traditional Brass Industry – A Sri Lankan case study |
|
Dhini, Arian
Application of Text Mining for Classification of Textual Reports: A Study of Indonesia's National Complaint Handling System |
|
Multi-Attribute Control Chart Design for Bronze Pipe Fittings Production |
|
Review on some Multivariate Statistical Process Control Methods for Process monitoring |
|
Dhouib, Karem
Optimal Production-Inventory Control Policy for Manufacturing Systems Subject to Quality Deterioration |
|
Din, Abdul Talib
Solutions to ammoniacal nitrogen presence in CMP effluent from oxide process |
|
Dolatshahi, Amirali
A Risk Management Framework for Selling a Mega Power Plant Project in a New Market |
|
Dressel, Fanny
Material Flow Cost Accounting in Supply Chains – Challenges and Approaches |
|
Duffield, Colin F.
A balanced approach to project management in partnering types of contract: a public private partnerships framework |
|
Duffuaa, Salih
AN EFFECTIVE ORGANIZATIONAL STRUCTURE TO IMPLEMENT STRATEGIC PLANS IN HIGHER EDUCATION INSTITUTIONS |
|
Dzulkalnine, Natasha
COMPARATIVE STUDY OF PROCUREMENT SYSTEM BETWEEN INDUSTRIALISED BUILDING SYSTEM (IBS) AND CONVENTIONAL CONSTRUCTION |
|
Eapen, Shaiju
Assessment of Business Processes in Consolidated Patient Account Centers |
Top |
Edy, Martinus
Performance Measurement in PT. XYZ Using The Balanced Scorecard (a case study of PT. XYZ) |
|
El fezazi, Said
Critical Success Factors of Implementing Green Lean Six Sigma |
|
Road Map for the Implementation of Lean production tools in SMEs |
|
El Hakea, Ayman
Component Rating Optimization Methodology for the Protection of Photovoltaic Solar Power System Components from Shading Effect |
|
EL HEIT, Kaddour
CHARACTERIZATION AND MODELING OF RHEOLOGICAL BEHAVIOR OF A SYSTEM OF MUD A REVERSE EMULSION |
|
The environmental impact of inputs used in the vitiviniculturalsector in Algeria |
|
El Touby, Pakinam
Network Management and Bandwidth Resource Allocation in Educational Institutions |
|
El-Kilany, Khaled
An Integrated Framework for Optimization of Resources in Emergency Departments |
|
El-Zoghby, Julia
An Integrated Framework for Optimization of Resources in Emergency Departments |
|
Elamrani , Fatima Zohra
Critical Success Factors of Implementing Green Lean Six Sigma |
|
Production Management Model Integrating Green and Lean Six Sigma |
|
ElKamel, Ali
A Review of Models for Optimal Bio-products Syntheses from Oil Palm Empty Fruit Bunch (EFB) |
|
Optimization of a Battery Pack in Plug-In Hybrid Electric Vehicles |
|
Sensitivity Analysis in Optimization of Multiple Cyclone Arrangements |
|
Stochastic Dynamic Optimization of Engineering Processes |
|
Superstructure Optimization of Multiple Gas-Solid Cyclone Arrangements |
|
Temperature Distribution using Zone Models for Radiative Sections of Fired Process Heaters |
|
Thermochemical Processing of Biomass: Graphic User Interface Models for Costing and Material Balances |
|
ElSayed, Aziz E.
Development of a Business Process Model Notations (BMPN) for a Cloud Manufacturing Architecture |
|
Network Management and Bandwidth Resource Allocation in Educational Institutions |
|
Eltawil, Amr
A Discrete-Event and Agent-Based Hybrid Simulation Approach for Healthcare Systems Modeling and Analysis |
|
An Integrated Model for Chemotherapy Planning |
|
Ema, Kaoru
Analysis of VOC (Voice of Customer) Data for Assessing Corporate Image of a Housing Equipment Company |
|
Emami, Hamed
ANALYTICAL STUDY OF PECKING ORDER THEORY OF CAPITAL STUCTURE;EVIDENCE FROM MALAYSIA |
|
Erni, Nofi
Implementation of Knowledge Management at Woven Handycraft Industry (Case Study : DI Yogyakarta – Indonesia) |
|
Estember, Rene
Effects of Different Interruptions While Driving for Field Independent and Dependent Individuals |
|
Forecasting of Stock Prices Using Brownian Motion – Monte Carlo Simulation |
|
Fadel, Omnia
Tolerance Analysis using An alternative to Monte Carlo simulation |
Top |
Fahmy, Sherif
A Genetic Algorithm for Solving the Integrated Cell Formation, Layout and Scheduling Problem |
|
Faias, Marta
A Game-Theoretic Approach to Digital Marketing and Lead Generation for Duopoly Markets |
|
Failaka, Muhamad Fariz
Sensitivity Analysis in Optimization of Multiple Cyclone Arrangements |
|
Stochastic Dynamic Optimization of Engineering Processes |
|
Superstructure Optimization of Multiple Gas-Solid Cyclone Arrangements |
|
Farhang Doost , Alireza
Value of Perfect Information in Condition Based Maintenance using Proportional Hazards Models; a comparison of maintenance strategies |
|
Farhat, Nazma
Valued Supply Chain: The imminent Frontier For Improved Hospital Management |
|
Farid, Touiti
Desalination of Seawater Research Project on the Basis of the Positive Results of Water Treatment by Magnetic Field |
|
Farooquie, Jamal A
Reverse Logistics in Indian Pharmaceutical Industry |
|
Farooquie, Parveen
Supply Chain Flexibility and Performance under Uncertainty in Indian Automotive Industry |
|
Farouk, Ahmed
Reliability and Maintainability Parameters Estimation under Imperfect Repair and Maintenance by Genetic Algorithm |
|
Farouk, Hala
An Integrated Framework for Optimization of Resources in Emergency Departments |
|
Fathoni, Muhammad Israr
Android Maze Game for Children as an AutismTherapy |
|
Fathy, Amr
Genetic Algorithms For Two-Phase Construction Dynamic Site Layout |
|
Fatima, Noshin
Effect of Heating on the Impedance of NiPc based Organic Field Effect Transistor |
|
Various Techniques to Design Controllers for Single Link Flexible Arm |
|
Fatoni, Rois
A Review of Models for Optimal Bio-products Syntheses from Oil Palm Empty Fruit Bunch (EFB) |
|
Optimization of a Battery Pack in Plug-In Hybrid Electric Vehicles |
|
Superstructure Optimization of Multiple Gas-Solid Cyclone Arrangements |
|
Temperature Distribution using Zone Models for Radiative Sections of Fired Process Heaters |
|
Thermochemical Processing of Biomass: Graphic User Interface Models for Costing and Material Balances |
|
Fedotova, Kristine
The Strategic Management Analysis of Wood Manufacturing Companies in Latvia - Interdisciplinary approach |
|
Ferdows Nipa, Jannatul
Study on Performance Evaluation of Self-propelled Reaper |
|
Fernandes, Ana Cristina
Improving organizations performance through Supply Chain Quality Management practices |
|
Ferris, Timothy
Assessing Self-Responsibility in Employability Competencies Development among Australian Engineering Students: Introductory report |
|
Feyissa, Tesfaye Tolu
Determinants of the Scope of Supply Chain E-Collaboration |
|
Relating E-integrated, Triple-A Supply Chain to Environmental Uncertainty, Market Competition and Firm Performance |
|
Relating Supply Chain E-Integration to Organizational Strategy |
|
Feylizadeh, Mohammad Reza
Priority Determination of the Renewable Energies Using Fuzzy Group VIKOR Method; Case Study Iran |
|
Fileinti, Nauli Dwi
Predicting The Development Time of Platform For Multiple-Generation Product Using Artificial Neural Network |
|
Firmansyah, Mohammad Rizal
Intermediary agent in the holistic collaborative production distribution network model for SMMEs |
|
The development of a framework for Australian SMMEs collaboration in a global supply chain environment, Part 1: A conceptual model and solution approach |
|
The development of a framework for Australian SMMEs collaboration in a global supply chain environment, Part 2: Genetic operators and a case study |
|
Firouzi Jahantigh, Farzad
A Hybrid Genetic Algorithm for Solving Facility Location-Allocation Problem |
|
Firouzi Jahantigh, Farzad
Knowledge extraction from TB patients- A hybrid model with clustering and decision tree |
|
Firouzi Jahantigh, Farzad
Quantitative Optimization of Nurses in Emergency Department of Teaching Hospital: A case study |
|
Fowler, Michael
Optimization of a Battery Pack in Plug-In Hybrid Electric Vehicles |
|
Franco, Thomas
Improving Indian Healthcare using Data Mining |
|
Franke, Joerg
Enhanced Organizational Ambidexterity in Electronics Manufacturing through the Automation of Production-Related Processes |
|
Ontology-Based User Guidance for Energy Efficiency Optimization Measures |
|
Frolova, Elena
YOUR OPINION MATTERS: A CROSS-SECTIONAL STUDY ON HAPPINESS AMONG OLDER ADULTS IN SIBERIA |
|
Fujiwara, Masaki
Importance of the Strategic Utilization of Information Technology in Small and Medium-Sized Food Manufacturers in Japan |
|
Gadallah, Mohamed
Tolerance Analysis using An alternative to Monte Carlo simulation |
Top |
Galih, Indi
Designing Laptop Based On Costumer Preference Using ECQFD and TRIZ Methods |
|
gandhi, Yash
Model Predictive Control for Automobiles |
|
Quater Car Analysis Using Simulink |
|
GANGAL, CHAITANYA
ANALYZING THE EFFECT OF LINE-CELL CONVERSION ON MANUFACTURING SYSTEMS |
|
Ganguly, Anirban
Using Multiple Criteria Approach to Evaluate Risks associated with Supply Chain Sustainability |
|
Ganjouhaghighi, Negar
A Risk Management Framework for Selling a Mega Power Plant Project in a New Market |
|
Gao, Yi-Feng
Optimal Pricing Strategy for Multi-generations Durable Products with a Trade-in Program |
|
Garcia, Guisselle
Assessing the effect of implementing a port community system platform in the response time of an international terminal: the case of a multi-cargo facility at the Colombian Caribbean coast |
|
Gardoni, Mickael
System of decision-making assistance for the recycling manufactured products. |
|
Gashgari, Raneem
Optimizing the Final Exam Scheduling Process at King Abdulaziz University |
|
Geipele, Ineta
Energy Efficiency Improvement Opportunities in Latvia as a Sustainable Development Indicator |
|
Energy sector process control system to ensure achievement of energy efficiency targets in Latvia: a case study |
|
Importance of Business Incubators for New Business and its Development in Latvia |
|
Influence of Economic and Real Estate Market Fluctuations on Real Estate Entrepreneurship in Latvia |
|
Real Estate Investment Management and Macroeconomic Sustainability: Case of Latvia and International Experience |
|
Geipele, Sanda
Energy sector process control system to ensure achievement of energy efficiency targets in Latvia: a case study |
|
Management of energy efficient processes in residential and public buildings at regional level: a Case Study of Latvia |
|
Geipele, Sanda
The Strategic Management Analysis of Wood Manufacturing Companies in Latvia - Interdisciplinary approach |
|
Ghani, Mohd Khairolden Ghani
Performance Management Criteria in Malaysian Healthcare |
|
Ghasemi, Alireza
Value of Perfect Information in Condition Based Maintenance using Proportional Hazards Models; a comparison of maintenance strategies |
|
Ghazy, Mootaz
Development of a Business Process Model Notations (BMPN) for a Cloud Manufacturing Architecture |
|
Reliability and Maintainability Parameters Estimation under Imperfect Repair and Maintenance by Genetic Algorithm |
|
Ghosh, Partha Sarathi
Reliable capacitated facility location problem: SAA based approach |
|
Gobaco, Bryan
Prepositioning of relief goods under network uncertainty for tropical cyclones with information updates: a humanitarian supply chain |
|
Godilano, Ezrha
Improvement of Productivity Rate of JIT #262, Creams, Liquids, Lotions Department of a Cosmetics Company |
|
Goh, Shao Hung
A Price Review Framework for Maintenance, Repair and Operations Procurement Contracts in the Public Sector |
|
Commercial Viability of Foldable Ocean Containers |
|
Gonzalez rubio, Jose luis
Visual data mining of faults in machining process based on machine learning |
|
Goto, Hiroyuki
An Analytical Framework for Local Impacts of Road Pricing Policy: A Case Study of the Tokyo Metropolitan Area |
|
Categorization of Web News Documents Using Word2Vec and Deep Learning |
|
Performance evaluation of a heuristics for the prize collecting Steiner tree problem |
|
Resolution of Resource Contentions in the Critical Chain Project Management based on Simulated Annealing |
|
Götze, Uwe
Framework of an '(In)Efficiency Costing' based on the idea of Material Flow Cost Accounting |
|
Material Flow Cost Accounting in Supply Chains – Challenges and Approaches |
|
GOVINDASAMY, GOPU
FABRICATION OF FRACTURE AID USING RAPID PROTOTYPING |
|
Grilo, Antonio
A Game-Theoretic Approach to Digital Marketing and Lead Generation for Duopoly Markets |
|
grover, richa
Impact of 5S Implementation |
|
Rework Reduction in KHS machinery Pvt. Ltd. |
|
Gumasing, Ma. Janice
Effects of Different Interruptions While Driving for Field Independent and Dependent Individuals |
|
Gunawan, Ivan
Performance Measurement in PT. XYZ Using The Balanced Scorecard (a case study of PT. XYZ) |
|
Guoxin, Li
The Effect of Perceived Self-Efficacy and Product Comparisons on Outcome Expectancy of Portable Multi-Screens |
|
Gupta, Gaurav
An Efficiency and Consistency Based Approach for Selecting the Best Cricket Team |
|
Gupta, Juhi
Optimal Aggregate Production Planning by using Genetic Algorithm |
|
Gupta, Juhi
Rework Reduction in KHS machinery Pvt. Ltd. |
|
Gupta, Mohit
A study on the Profitability Analysis of Power Grid Corporation of India Ltd |
|
gupta, shikha
Towards Risk Managed Cloud Adoption A Conceptual Framework |
|
Gupta, Surbhi
A study on the Profitability Analysis of Power Grid Corporation of India Ltd |
|
Gwee, Wan Theng
Diverse Possibility of Fit Manufacturing Principle Into Value Stream Mapping(VSM) and Its Impact: A Review |
|
Hadi, Ismanurrahman
OPTIMIZATION OF THE ACID CATALYST CONCENTRATION FOR SYNTHESIS OF ANTI-CANCER AGENT GAMAVUTON-0 BY USING MATHEMATICAL AND STATISTICAL SOFTWARE |
Top |
Hadining, Aulia
Evaluating the Location of Effective Product Advertising on Facebook Ads |
|
Hadj, Mimoun
Measurement and Prediction of Condensate Gas Hydrates Formation Conditions – A Study Case |
|
Hafezinia, Mojhgan
Waiting time duration-constrained Close-Open Mixed Vehicle Routing Problem with Semi Soft Time Window solved by Genetic algorithm and Tabu Search |
|
hagos, rezene kahsay
Implementation of computerized Preventive Maintenance In Sur construction PLC |
|
haidar, alhamidi
Android Maze Game for Children as an AutismTherapy |
|
Hain, Karl
Fostering creativity and innovation in engineering design education: A case study |
|
Haji Sabran, Ahmad Soyuti
Knowledge Management (KM) in Human Error (HE) in Accident Prevention |
|
hajizadeh, mehrdad
Placement of Solar-Wind Hybrid Power Plant in iran with using AHP algorithm and technical and economic evaluations by HOMER software |
|
HAJRI-GABOUJ, Sonia
Manufacturing configuration selection under arduous working conditions: A multi-criteria decision approach |
|
Risk issues in facility layout design |
|
Hakim, Inaki Maulida
Motion and Time Study : Measurement of Workstation For Piston Assembly Line Considering Anthropometric For Indonesian People |
|
Hamadache, Hamid
Study of surface quality - Effect of fractal dimension and texture parameters |
|
Hamid, Zuhairi Abd Hamid
Performance Management Criteria in Malaysian Healthcare |
|
Han, Yuchan
Composition Methodology for Optimal Portfolio and Performance Measures Considering Indian SENSEX |
|
Composition Methodology for Optimal Portfolio and Performance Measures Considering Indian SENSEX |
|
Hanif, Farhan
Various Techniques to Design Controllers for Single Link Flexible Arm |
|
Hanif, Muhammad
Optimal Control Applied to Dynamic Model of Climate Change: A Bangladesh Scenario |
|
Haque, Md. Mohidul
Optimal Control Applied to Dynamic Model of Climate Change: A Bangladesh Scenario |
|
Hardaya, I. B. N. Sanditya
Multi-Attribute Control Chart Design for Bronze Pipe Fittings Production |
|
Hardaya, I.B.N. Sanditya
Application of Text Mining for Classification of Textual Reports: A Study of Indonesia's National Complaint Handling System |
|
Harding, J.A.
Product-Service System and Inventory Control: Provision in a UK manufacturing case study |
|
Harimurti, Sabtanti
OPTIMIZATION OF THE ACID CATALYST CONCENTRATION FOR SYNTHESIS OF ANTI-CANCER AGENT GAMAVUTON-0 BY USING MATHEMATICAL AND STATISTICAL SOFTWARE |
|
Harisuddin, Muhammad
MODEL AND SIMULATION DESIGN OF STACKING RULES IN CONTAINER TERMINAL WITH DISCRETE EVENT SIMULATION APPROACH |
|
Haron, Habibah
The Level of Safety Culture Beliefs and Practices Amongst Safety and Health Officers (SHOs) in Malaysian Manufacturing Companies |
|
Haroun, Ahmed Elamin
AN EFFECTIVE ORGANIZATIONAL STRUCTURE TO IMPLEMENT STRATEGIC PLANS IN HIGHER EDUCATION INSTITUTIONS |
|
Hasachoo, Narat
Schedule Nervousness in Production Operations of an Airline Catering Company: The Challenge of an Effective Demand Response Program |
|
Hasan, Maruf
The history and development of six sigma quality management |
|
Hasan Miraz, Mahadi
Supply chain management in service Quality |
|
Hasbullah, Endang Soeryana
Mean-Variance Portfolio Optimization on Some Stocks By Using Non Constant Mean and Volatility Models Approaches |
|
Hashemipour , Majid
A Dynamic Multi Agent based scheduling for flexible flow line manufacturing system: UPVC door and window Company |
|
HASHIM, NURUL AYU
Remote Global Alignment Error for Pad Inductor Layer To Improve The Cycle Time |
|
Hashim, Uda
SEMICONDUCTOR FABRICATION STRATEGY FOR CYCLE TIME AND CAPACITY OPTIMIZATION: PAST AND PRESENT |
|
Hashim, Zarifah Syazana
Copper Sheet Resistance characteristics in the production staging time limitation study between Copper Seed and Copper Electroplating in Semiconductor Wafer manufacturing |
|
Haskins, Cecilia
Availability Allocation Using Systems Engineering Principles |
|
Hasni Abdullah, Roslan Bin
Applications De Bruijn Graphs of Hamiltonian and Eulerian Cycles to Fault Tolerant Networks |
|
Hassan, Mohd Fahrul
ProSET: A Decision Support System for Sustainability Performance Evaluation |
|
Hassan, Syed Muhammad
Consideration of economics and ergonomics aspects in the design and manufacturing of Hydraulic Floor crane |
|
Hassanin , Ahmed
Modified Cluster Boundary Search Technique for Improved Layout Designs |
|
hassanpour, hamed
Investigation of surface integrity in high speed machining of Ti6Al4V alloy |
|
Hassnien, Amr
Reliability and Maintainability Parameters Estimation under Imperfect Repair and Maintenance by Genetic Algorithm |
|
Hatipoglu, Gozde
Applying the Principles of Lean Management to the Radiology Department |
|
Hayashi, Takaki
Analysis of VOC (Voice of Customer) Data for Assessing Corporate Image of a Housing Equipment Company |
|
Development of Effective Marketing Strategies for a Housing Equipment Company Based on Analysis of Sales Data and Sales Personnel |
|
Structural Analysis of Page Access Behaviors of Sessions at Website of a Housing Equipment Company |
|
He, Xin James
Big Data Business Analytics: Attitude and Readiness |
|
Heidari, Ali Asghar
Let a CPSO+ algorithm explore your high-quality shortest paths: an effective chaos-enhanced PSO-based strategy |
|
Helmi, Syed Ahmad
Agile Supplier Selection: A Fuzzy Analytic Hierarchy Process (FAHP) Approach |
|
Helmi, Syed Ahmad
Lean Supplier Selection: A Data Envelopment Analysis (DEA) Approach |
|
Hemdi, Abdul Rahman
Measuring Product Sustainability Using Fuzzy Method |
|
Heshmat, Mahmoud
An Integrated Model for Chemotherapy Planning |
|
Hidayatno, Akhmad
Literature review of Physical Delivery Service Quality : type of research and research gap |
|
Hishamuddin, Hawa
Disruption recovery of two-stage serial supply chain with consideration of carbon emission cost |
|
Integration of economic and environmental aspects in sustainable supply chain management: a review |
|
Hisjam, Mohammad
Agile Supplier Selection: A Fuzzy Analytic Hierarchy Process (FAHP) Approach |
|
Lean Supplier Selection: A Data Envelopment Analysis (DEA) Approach |
|
HO, Hwi-Chie
CAR DRIVERS WITH HIGHER PERCEIVED SAFETY TEND TO DRIVE THEIR VEHICLES WITH HIGHER RISK, A UNIQUE PHENOMENON ON THE ROADS IN JAKARTA, INDONESIA |
|
hocine, abderrezak
Search an electric prevention by controlling the resistive component of the isolation of an ungrounded low voltage electrical network |
|
Hopf, Hendrik
FSMER – Systematic Approach for Modeling Energy and Resource Efficient Factories |
|
Hosokawa, Yuki
Performance evaluation of a heuristics for the prize collecting Steiner tree problem |
|
Howard, Ian
An Investigation Into Bearing Fault Diagnostics for Condition Based Maintenance Using Band – Pass Filtering and Wavelet Decomposition Analysis of Vibration Signals |
|
Huang, Ching-Jen
A case study of production scheduling and shop floor control for hybrid flexible flowshop |
|
Applying fuzzy-AHP and VIKOR method to evaluate the fitness of ERP systems |
|
Huang, Hsin-Wei
Reliability Analysis of a Motor Control Unit Used in Electric Vehicles |
|
Hussain, Hadia
An Investigation of Lean Manufacturing Implementation in Textile Sector of Pakistan |
|
Hussain, M.I
Diverse Possibility of Fit Manufacturing Principle Into Value Stream Mapping(VSM) and Its Impact: A Review |
|
Productivity Assessment Based on Different Perspectives in Industries: A Review |
|
Hussain, Salman
Application Of Concurrent Engineering For Collaborative Learning And New Product Design |
|
Hussain, Tanweer
An investigation into the impact of advance manufacturing technologies implementation in SMEs manufacturing plastic packaging products- A case study of Pakistan |
|
Hussin, Burairah
Relationship between Human Errors in Maintenance and Overall Equipment Effectiveness in Food Industries |
|
I. Al-Mosawi, Ali
Effect of Wire Cutting Process on the Variables of Surface Roughness |
Top |
Ibrahim, Ihfasuziella Ibrahim
Performance Management Criteria in Malaysian Healthcare |
|
Ibrahim, Kader
Enabling CMOS 0.13µm technology at 0.18um equipment platform on 200mm Semiconductor Manufacturing Industry |
|
Idoye, Emeka
Understanding Risk Perception Related to Trust and Bias in Cyberspace |
|
Iizuka, Shinji
An Improved Analogy-based Demand Forecasting Method for Service Parts |
|
ikome, john
A relationship framework and Critical application in between strategy and operational plans for manufacturing industry |
|
An Analysis of competitive Advantages of South African Manufacturing industries. A case study; Automotive Industries. |
|
Ikome, Martha
A relationship framework and Critical application in between strategy and operational plans for manufacturing industry |
|
Inaba, Tatsuya
Networked RFID based Supply Chain Process Analysis |
|
Iqbal, Mohammad
FIRE SAFETY AND AVAILABILITY OF FIRE FIGHTING EQUIPMENT IN SELECTED GARMENT FACTORIES IN BANGLADESH |
|
Iridiastadi, Hardianto
Fatigue from driving – a comparison between morning and afternoon tasks |
|
Musculoskeletal Disorders Among Caregivers in Nursing Home |
|
Research on BRT Driver Jakarta Fatigue Evaluation |
|
Ishak , Dendi
Qualtiy Improvement in Plastic Based Toy Manufacturer Using Six Sigma Method |
|
Ishola, Felix
Process Variability Analysis of License Vehicle Number Plate Production in Nigeria |
|
Islam, Ishat
Applying 5S Method on Trims Store's Documentation System in an Apparel Industry |
|
Ismail, Md Yusof
A Critical Assessment of Prevailing Models for Measuring Lean Manufacturing |
|
Relationships of Lean, Green Manufacturing and Sustainable Performance: Assessing the Applicability of the Proposed Model |
|
Ismail, Mohamed
EmployingTechnology To Customize The Flipped Classroom Practice |
|
Ismail, Siti
Product-Service System and Inventory Control: Provision in a UK manufacturing case study |
|
ismaila, olasunkanmi
Anthropometric Data Variation Within Gari-frying Population |
|
Ito, Teruaki
Hidden Wastes in Overall Equipment Effectiveness (OEE) under the study of Maynard's Operation Sequence Technique (MOST) |
|
Ivanova, Svetlana
Income inequality and human capital as factors influencing economic development of region – case study of Latvia |
|
Income inequality and human capital as factors influencing economic development of region – case study of Latvia |
|
Increasing the competitiveness of the city with energy efficiency measures possibilities for Latvian cities |
|
Increasing the competitiveness of the city with energy efficiency measures – possibilities for Latvian cities |
|
J.S Ali, Mohamed
A Prospective Solution for Consistent Aerostatic Lift for a Hybrid Buoyant Aircraft |
Top |
Jaaron, Ayham
Activating Organizational Learning Capabilities through Service Operations Design |
|
Impact of Change Orders In Construction Sector In The West Bank |
|
Jabbarzadeh, armin
A Multi Objective Robust Model for Capacity-Constraint Hub-Covering Flow Problem |
|
JAFERI, FATEMEH
Selecting The Contractor using Multi Criteria Decision Making Case Study : National Gas Company of Lorestan province of Iran |
|
Jamaluddin, Haris
The Challenge in Malaysian Industries in Implementing Design of Experiment |
|
Jamil, Ifra
IMPACT OF PERSONALITY TRAITS OF MANAGER ON THE PERFORMANCE OF PROJECT |
|
Jandhana, IB Putra
Literature review of Industrial Competitiveness Index : research gap |
|
Janjua, Naeem
In-house Crowdsourcing-based Entity Resolution using argumentation: Issue of Common Names |
|
jayabalan, neeta
HR Practices and organizational commitment among SME employees which leads to retention |
|
Jayamaha, Nihal
The Impact of ICT Usage on Collaborative Product Development Performance: A Conceptual Model and Industry Perspective |
|
Jayawickrama, Malan
An AHP Based Methodology to Evaluate Social Life Cycle of an Apparel Manufacturing Plant |
|
Decision support framework for the Sustainability of Traditional Brass Industry – A Sri Lankan case study |
|
Jeyanthinathasarma, Gowrynathan
DESIGN AND DEVELOPMENT OF GREEN LABEL POINT RATING SYSTEM TO PROMOTE SCP CONCEPTS |
|
Selecting the best layout for the container terminal using Modeling and Simulation Techniques |
|
Ji, Myeonghun
Using Mathematical Programming for Investment Assessment and Optimal Investment |
|
Using Mathematical Programming for Investment Assessment and Optimal Investment |
|
Jientrakul, Ranon
Multiple Performance Optimization forHuman-Robot Collaboration: a Translation Motion in a Tele-Sandblasting Maintenance System |
|
Jigar, Abraham Almaw
Availability Allocation Using Systems Engineering Principles |
|
Johar, Muhammad Akmal
Comparative Performance Study of Smart Structure for Thermal Microactuators |
|
Johari, Mohamed Fitri
Estimation of compensation cost related to Musculoskeletal Disorder: Younger versus Older Malaysian Manufacturing Workers |
|
Judrupa, Ilze
Introducing of smart work – opportunity to increase economical development of municipalities in Latvia |
|
Introducing of smart work – opportunity to increase economical development of municipalities in Latvia |
|
Jufar, Shiferaw Regassa
Numerical Study of Non-Premixed Combustion of Pulsed Swirling Co-axial Jets |
|
Jumani, Muhammad
An investigation into the impact of advance manufacturing technologies implementation in SMEs manufacturing plastic packaging products- A case study of Pakistan |
|
K, Hemachandran
Performance Analysis of Different Controller for PEMFC Fed Adjustable Speed Drives |
Top |
K KULKARNI, PAVAN KUMAR
An Integrated Multi-Echelon Stochastic Supply Chain Production-Distribution Model With Carbon Emissions |
|
Kabadi, Vinay V
Optimized Measures to Improve TAT in Product Maintenance |
|
Kadiresan, Vimala
HR Practices and organizational commitment among SME employees which leads to retention |
|
Kaestle, Christopher
Enhanced Organizational Ambidexterity in Electronics Manufacturing through the Automation of Production-Related Processes |
|
Kahloul, Laid
Using several intelligences for complex industrial process monitoring :detection and diagnosis |
|
Kahsay, Mulu Bayray
Aerodynamic Optimization of NACA64A410 Blade Aerofoil for Small Wind Turbine Application with Ansys Fluent |
|
Kakarla, Manoj
A Social Network Based Optimisation Approach on Patient Admission Scheduling Problem |
|
Kalia, Arvind
Investigating Software Detection Methods |
|
Kalluri, Vinayak
Evaluation of Innovative Product Development Practices in an Organization: A Case Study |
|
Kamaruddin, Nor Kamariah
Workplace Ergonomics and Employees' Health: A Case Study at Automotive Manufacturer |
|
Kamaruzzaman, Syahrul Nizam Kamaruzzaman
Performance Management Criteria in Malaysian Healthcare |
|
KAMEL, BADDARI
Facies Analysis and Permeability/porosity Prediction from well log data using the Non Parametric Regression with Multivariate Analysis and Neural Network in the Reservoirs of the Hassi R'Mel Southern Field (Algeria) |
|
Kammoun, Raoudha
Class-Time Utilization in Business Schools in Tunisia |
|
Kamola, Liga
Income inequality and human capital as factors influencing economic development of region – case study of Latvia |
|
Income inequality and human capital as factors influencing economic development of region – case study of Latvia |
|
Increasing the competitiveness of the city with energy efficiency measures possibilities for Latvian cities |
|
Increasing the competitiveness of the city with energy efficiency measures – possibilities for Latvian cities |
|
Kamols, Uldis
Income inequality and human capital as factors influencing economic development of region – case study of Latvia |
|
Income inequality and human capital as factors influencing economic development of region – case study of Latvia |
|
Increasing the competitiveness of the city with energy efficiency measures possibilities for Latvian cities |
|
Increasing the competitiveness of the city with energy efficiency measures – possibilities for Latvian cities |
|
The Significance of Riga Neighbourhoods for the Sustainable Economic Development of the City |
|
KAN, TING-HAO
Reliability Analysis of a Motor Control Unit Used in Electric Vehicles |
|
Kanakana Katumba, Mukondeleli Grace
An Analysis of competitive Advantages of South African Manufacturing industries. A case study; Automotive Industries. |
|
An empirical study of competitiveness measurement methododology: A case study of the automotive manufacturing sector |
|
Assessment of Automotive Industry Component Supplier's Competitiveness in South Africa |
|
The impact of Process Improvement initiatives in manufacturing industry in South Africa |
|
Kang, Po-Chih
Applying fuzzy-AHP and VIKOR method to evaluate the fitness of ERP systems |
|
Kantanantha, Nantachai
A Hybrid Particle Swarm Optimization Algorithm and Support Vector Machine Model for Agricultural Statistic of Thailand Forecasting |
|
Karadsheh, Zina
A Taguchi-Continuous Simulation Approach to the Injection Molding Blowing Process Quality Improvement |
|
Karia, Noorliza
Enterprise Resource Planning (ERP) Systems in the Egyptian Higher Education Institutions: Benefits, Challenges and Issues |
|
Transforming green logistics practice into benefits: a case of 3PLs |
|
karim, A.N.M.
A Critical Assessment of Prevailing Models for Measuring Lean Manufacturing |
|
Relationships of Lean, Green Manufacturing and Sustainable Performance: Assessing the Applicability of the Proposed Model |
|
Karimov, Khasan
Effect of Heating on the Impedance of NiPc based Organic Field Effect Transistor |
|
Karmakar, Sandipan
A Bayesian LASSO Algorithm for Simultaneous Variation Fault Diagnosis in Ill Conditioned Multistage Manufacturing Processes |
|
Karunarathna, Shanaka
Decision support framework for the Sustainability of Traditional Brass Industry – A Sri Lankan case study |
|
KASBI, SLAMET
Design of Single-Phase Grid-Connected Based on Dual-MPPT for Photovoltaic Generation Systems |
|
Kasemset, Chompoonoot
Application of MFCA and ECRS in Waste Reduction: A Case Study of Electronic Parts Factory |
|
Katiyar, Himanshu
On the Energy detection of unknown signals over fading channel for different diversity combining techniques |
|
Katiyar, Jitendra
Facility and Process Layout Analysis of an SME using Simulation: A Case Study of a Manufacturing Company |
|
Kato, Ryoma
Categorization of Web News Documents Using Word2Vec and Deep Learning |
|
Kauškale, Linda
Energy Efficiency Improvement Opportunities in Latvia as a Sustainable Development Indicator |
|
Importance of Business Incubators for New Business and its Development in Latvia |
|
Influence of Economic and Real Estate Market Fluctuations on Real Estate Entrepreneurship in Latvia |
|
Real Estate Investment Management and Macroeconomic Sustainability: Case of Latvia and International Experience |
|
The Strategic Management Analysis of Wood Manufacturing Companies in Latvia - Interdisciplinary approach |
|
Kayvanfar, Vahid
Resource Management For Workflows In Cloud Computing Environment Based On Group Technology Approach |
|
Kazar, Okba
Using several intelligences for complex industrial process monitoring :detection and diagnosis |
|
Kazemi, Nima
Analyzing optimization techniques in inventory models: the case of fuzzy economic order quantity problems |
|
The effect of human learning with cognitive and motor capabilities on a fuzzy EOQ model |
|
KEE-LUEN, WONG
In search of Malaysian companies with successful implementation of business intelligence initiatives |
|
Khadeer Hussain, Omar
In-house Crowdsourcing-based Entity Resolution using argumentation: Issue of Common Names |
|
Next Generation of Interactive contact centre for efficient customer recognition |
|
Khadem, Mohammad
Occupational Health and Safety issues affecting worker performance in Omani industries (SME's) |
|
Khaleghi, Sahar
Autonomic Learning Algorithm to Predict Stock Price at the Exchange via Metaheuristics-Based Optimization |
|
Khalifa, GAYE
System of decision-making assistance for the recycling manufactured products. |
|
Khalili, Amjad
A Critical Assessment of Prevailing Models for Measuring Lean Manufacturing |
|
Relationships of Lean, Green Manufacturing and Sustainable Performance: Assessing the Applicability of the Proposed Model |
|
Khaliqdina, Jamil
An investigation into the impact of advance manufacturing technologies implementation in SMEs manufacturing plastic packaging products- A case study of Pakistan |
|
Khan, M. Khurshid
Development of an Expert System for the Feasibility Assessment of Renewable Energy Projects |
|
Scheduling of Three FMS Layouts Using Four Scheduling Rules |
|
Khan, Moin
"Performance Evaluation"&"Problems Identifications in Warehouses" OF THIRD-PARTY Logistics |
|
Khan, Muhammad Ibrahim
Consideration of economics and ergonomics aspects in the design and manufacturing of Hydraulic Floor crane |
|
Khan, Saifullah
CUSTOMER ORDERS PRIORITIZATION USING TOPSIS IN MULTI BUSINESS CHANNEL ENVIRONMENT |
|
Khan, Shahid Kalim
How Team Allocate the Resource; A Model of Escalation of Commitment in Competitive Situation |
|
The Effect of Perceived Self-Efficacy and Product Comparisons on Outcome Expectancy of Portable Multi-Screens |
|
Khanzode, Vivek
Design and assessment of lean handling buffers in forward-reserve model |
|
Khatter, Kiran
Investigating Software Detection Methods |
|
Khoshsoroor, Somayeh
How Team Allocate the Resource; A Model of Escalation of Commitment in Competitive Situation |
|
The Psychology of the Competition in High-Tech Industries |
|
Khot, Mukesh
: Enhancement of tube and tube Heat exchanger with semispherical hollow baffle for counter flow |
|
Khusairi, Nor'Azah
Development of Comprehensive WIP Performance Monitoring Systems for Semiconductor Fabrication Foundry |
|
Kiatcharoenpol, Tossapol
A Study of Green Procurement Practices: A Case Study of the Computer Parts Industry in Thailand |
|
Kidane, Teklehaimanot Tadele
Factors Affecting Consumers' purchasing Decision through E-Commerce |
|
Influence of culture on E-commerce and vice versa |
|
Relating Supply Chain Risks to Supply Chain Strategy |
|
Kilic, Kemal
Fuzzy Extent Analysis: Comparison of Defuzzification Methods |
|
Kim, Dain
Crime Trend Analysis by Changes of Spatial Autocorrelation and Hot-spot |
|
Crime Trend Analysis by Changes of Spatial Autocorrelation and Hot-spot |
|
Kim, Minsung
Selection of Optimal Portfolio Model by Comparing Mock Stock Trading |
|
Selection of Optimal Portfolio Model by Comparing Mock Stock Trading |
|
Kim, Taeheon
Selection of Optimal Portfolio Model by Comparing Mock Stock Trading |
|
Selection of Optimal Portfolio Model by Comparing Mock Stock Trading |
|
KIMURA, Asako
How will MFCA make Usefulness on Sustainable Engineering? : Based on practical experiences in Japanese and Southwestern Asian companies |
|
Kissani, Ilham
Improvement of the Production Process via Kaizen: Case Study of a Wiring Company |
|
Kitada, Hirotsugu
Management Control Systems for Material Flow Cost Accounting: A Case of Japanese Company |
|
Kitamura, Yutaro
An estimation of land price by kriging using geographic information system |
|
Kitaoka, Masatoshi
Debugging Operation of Automated Assembly Lne using Signal Noise Ratio |
|
Kittipongpittaya, Ketinun
Application of Material Flow Cost Accounting and System Dynamics Approach for Waste Reduction and Sustainable Food Manufacturing Development in Thailand |
|
Kobayashi, Fuminori
Design of Single-Phase Grid-Connected Based on Dual-MPPT for Photovoltaic Generation Systems |
|
Kodali, Venkat Anirudh
A Social Network Based Optimisation Approach on Patient Admission Scheduling Problem |
|
KOK HONG, LENG
Remote Global Alignment Error for Pad Inductor Layer To Improve The Cycle Time |
|
Kokubu, Katsuhiko
Impact of Introducing Material Flow Cost Accounting: A Comparative Review of Supply Chains and Individual Companies |
|
Komatsu, Mikio
Structural Analysis of Page Access Behaviors of Sessions at Website of a Housing Equipment Company |
|
Kopey, Volodimir
Impact of the geometrical parameters of labyrinth seal on the efficiency of gas pumping unit |
|
Koriki, Miyuki
Importance of the Strategic Utilization of Information Technology in Small and Medium-Sized Food Manufacturers in Japan |
|
Kosanan, Onuma
A Hybrid Particle Swarm Optimization Algorithm and Support Vector Machine Model for Agricultural Statistic of Thailand Forecasting |
|
Kouki Amri, Sana
Risk issues in facility layout design |
|
Kouta, Hanan
Tolerance Analysis using An alternative to Monte Carlo simulation |
|
Koval, Oksana
Czech Students' Perception of Careers in the Shared Services Industry |
|
Krishnan, Krishna
Reliability-based Robust Design Optimization of Dynamic Supply Chain Network |
|
Krones, Manuela
Identification of Energy Efficiency Measures during Factory Planning Processes |
|
Kuan, Seng How
Debottlenecking of Conventional Copper Smelters |
|
Kulatunga, Asela
An AHP Based Methodology to Evaluate Social Life Cycle of an Apparel Manufacturing Plant |
|
Decision support framework for the Sustainability of Traditional Brass Industry – A Sri Lankan case study |
|
DESIGN AND DEVELOPMENT OF GREEN LABEL POINT RATING SYSTEM TO PROMOTE SCP CONCEPTS |
|
Fuzzy AHP based Multi-Criteria Decisions Support System for Eco-Design |
|
Perception of female employees towards the Lean and work culture change in apparel industry in Sri Lanka |
|
Selecting the best layout for the container terminal using Modeling and Simulation Techniques |
|
Kulkarni, Makarand
A Methodology for Simultaneously Optimizing Selective Maintenance Decision and X-Control Chart Parameters |
|
Cost Based Failure Consequence Approach for Identifying Critical Components for Maintenance Support Decision |
|
Kumar, Nishant
Improving Indian Healthcare using Data Mining |
|
kumar, Vimal
Exploring Critical Success Factors for TQM Implementation Using Interpretive Structural Modelling Approach: Extract from Case Studies |
|
Facility and Process Layout Analysis of an SME using Simulation: A Case Study of a Manufacturing Company |
|
Relating Left/Right Brained Dominance Types of Leaders to TQM Focus: A Preliminary Study |
|
Kurniati, Nani
Two-level Supply Chain with Extended Warranty in Competitive Market Environment |
|
Kurniawati, Kharisma Panca
Design of Human Cognitive Model in A Self-Optimizing Assembly Cell: A Case Study of Indonesian |
|
Kusrini, Elisa
Designing performance measurement procedure for supply chain actors and regulator base on a modified model of Balanced scorecard and Data Envelopment Analysis |
|
Laguardia, Ma. Erika
Assessment on 5S System of Rules in a Cosmetics Manufacturing's Central Weighing Area, Processing and Packaging Area for Creams, Liquids and Lotions (CLL) |
Top |
Lahmar, Hedia
Class-Time Utilization in Business Schools in Tunisia |
|
Lakshminarayanamurthy, Sadhanand
Improving Indian Healthcare using Data Mining |
|
Lakzadeh, AMIN
Feasibility of Implementation of Project Management System in Project Oriented Organizations–A Case Study of Electrical Distribution Company |
|
Lamontagne, Marie-Čve
Prioritization of patients with Communication Disorders |
|
Laosiritaworn, Wimalin
Ceramics Process Improvement with Material Flow Cost Accounting |
|
Laouar, Lakhder
Effect of inclination of the walls mold on the primary cooling during the continuous casting |
|
Study of surface quality - Effect of fractal dimension and texture parameters |
|
Larik, Javed
An investigation into the impact of advance manufacturing technologies implementation in SMEs manufacturing plastic packaging products- A case study of Pakistan |
|
Laseinde, Opeyeolu Timothy
An empirical study of competitiveness measurement methododology: A case study of the automotive manufacturing sector |
|
Assessment of Automotive Industry Component Supplier's Competitiveness in South Africa |
|
Laswad, Ahmed
Development of a Business Process Model Notations (BMPN) for a Cloud Manufacturing Architecture |
|
Lazarus, Daudi
Assessing Self-Responsibility in Employability Competencies Development among Australian Engineering Students: Introductory report |
|
Lee, C.C
Diverse Possibility of Fit Manufacturing Principle Into Value Stream Mapping(VSM) and Its Impact: A Review |
|
Lee, Hohyun
Composition Methodology for Optimal Portfolio and Performance Measures Considering Indian SENSEX |
|
Composition Methodology for Optimal Portfolio and Performance Measures Considering Indian SENSEX |
|
Crime Trend Analysis by Changes of Spatial Autocorrelation and Hot-spot |
|
Crime Trend Analysis by Changes of Spatial Autocorrelation and Hot-spot |
|
Selection of Optimal Portfolio Model by Comparing Mock Stock Trading |
|
Selection of Optimal Portfolio Model by Comparing Mock Stock Trading |
|
Using Mathematical Programming for Investment Assessment and Optimal Investment |
|
Using Mathematical Programming for Investment Assessment and Optimal Investment |
|
Lee, Jinwoo
Using Mathematical Programming for Investment Assessment and Optimal Investment |
|
Using Mathematical Programming for Investment Assessment and Optimal Investment |
|
Lee, Youngjoo
Selection of Optimal Portfolio Model by Comparing Mock Stock Trading |
|
Selection of Optimal Portfolio Model by Comparing Mock Stock Trading |
|
Lemma, Tamiru Alemu
Exergy Based Multi-State Reliability Model for a Stationary Gas Turbine |
|
Gas Turbine Prognostics using Fuzzy Systems and Modified Bat Algorithm |
|
Liao, Li-Man
A case study of production scheduling and shop floor control for hybrid flexible flowshop |
|
Applying fuzzy-AHP and VIKOR method to evaluate the fitness of ERP systems |
|
Lim, Hazel Lynne
An Optimization Model for Managing System Inventories in a Disaster Supply Chain |
|
Lin, Guan-Heng
A case study of production scheduling and shop floor control for hybrid flexible flowshop |
|
Lin, Jyhjong
Enhancing Enterprise Performance with Social BPM and TOGAF Framework |
|
Lizardo, Rose Angel
Competitive Revenue Management Model Using Dynamic Pricing for Theater Seats Management |
|
Lo, Hui-Chiung
Optimal Pricing Strategy for Multi-generations Durable Products with a Trade-in Program |
|
Lopez, Andrea
A Sequential Truck Transportation Waste Reduction Scheme |
|
LUGUTERAH, ALBERT
Yield Stability and Genotype by Environment Interaction of Fifteen Rice (Oryza Sativa L) Genotypes Evaluated under Rainfed and Irrigated Conditions in Northern Ghana |
|
Lundteigen , Mary Ann
Availability Allocation Using Systems Engineering Principles |
|
M, RAMKUMAR
Selection of Green suppliers based on GSCM practices: Using fuzzy MCDM approach in an Indian Electronics Company |
Top |
Macapuno, Michelle Joy
Determination of Burn-in Period Based on Reliabality Target for Product Failure Time with Weibull Distribution |
|
Madanhire, Ignatio
A Cleaner Production (CP) Perspective for the Metal Industry Processes: Case Study |
|
Cleaner Production to Optimize Resource Consumption and Reduce Effluent Waste in a Beverage Plant |
|
From Traditional to Modern Manufacturing System: Case Study |
|
Statistical Process Control (SPC) Application in a Manufacturing Firm to Improve Cost Effectiveness: Case study |
|
madkour, Amr
Near Optimal Solution for Green Vehicle Routing Problem |
|
Mafutsana, Jacob, Mafutsana, Jacob
A bibliographic review of trends in design and management of electrical power transmission transformers |
|
Maganini, Angelica
Supporting Decisions on Industrial Plant Modularization: A Case Study Approach in the Oil and Gas Sector |
|
MAGESH, VIVEK SUNDAR
Improving Indian Healthcare using Data Mining |
|
Maximizing revenues in the "Tatkal" Category of Indian Railways |
|
Modelling Approaches for a Sustainable Supply Chain |
|
Mahamud, Nur Syafilla
Hidden Wastes in Overall Equipment Effectiveness (OEE) under the study of Maynard's Operation Sequence Technique (MOST) |
|
Mahmood, Salwa
Measuring Product Sustainability Using Fuzzy Method |
|
Mahmoud, Mohamed
Network Management and Bandwidth Resource Allocation in Educational Institutions |
|
Mahmoudabadi, Abbas
Developing a cost-effective model for evaluating the efficiency of weigh in motion system |
|
Using Tolerated Risk for Solving Hazardous Material Routing Problem by Preemptive Goal Programming Approach |
|
MAIDIN, SHAJAHAN
Remote Global Alignment Error for Pad Inductor Layer To Improve The Cycle Time |
|
Maiti, Jhareswar
A Bayesian LASSO Algorithm for Simultaneous Variation Fault Diagnosis in Ill Conditioned Multistage Manufacturing Processes |
|
Majumdar, Adrija
An Efficiency and Consistency Based Approach for Selecting the Best Cricket Team |
|
Mali, Satishkumar
: Enhancement of tube and tube Heat exchanger with semispherical hollow baffle for counter flow |
|
Malmir, Behnam
A Hybrid Genetic Algorithm for Solving Facility Location-Allocation Problem |
|
Mamat, Sulong
Solutions to ammoniacal nitrogen presence in CMP effluent from oxide process |
|
Mancini, Mauro
Megaproject case studies: a stakeholder management perspective |
|
Supporting Decisions on Industrial Plant Modularization: A Case Study Approach in the Oil and Gas Sector |
|
Mandiartha, Putu
A balanced approach to project management in partnering types of contract: a public private partnerships framework |
|
Maneefun, Waralak
IMPROVEMENT OF MASTER PRODUCTION PLANNING IN A SEMI-CONDUCTOR MANUFACTURER |
|
Manikam, Arumugam
Yield Improvement Of Wafer Edge Die Defocus (EDD) at Via Layer |
|
Manisri, Tharinee
A Practical Case Study of a Heterogeneous Fleet Vehicle Routing Problem with Various Constraints |
|
Mansori , Shaheen Mansori
HR Practices and organizational commitment among SME employees which leads to retention |
|
MANUPATI, VIJAYAKUMAR
A Social Network Based Optimisation Approach on Patient Admission Scheduling Problem |
|
An Intelligent feature based process planning for Rotational parts |
|
ANALYZING THE EFFECT OF LINE-CELL CONVERSION ON MANUFACTURING SYSTEMS |
|
Selection of Green suppliers based on GSCM practices: Using fuzzy MCDM approach in an Indian Electronics Company |
|
SOCIAL NETWORK ANALYSIS BASED EVOLUTIONARY ALGORITHIMIC APPROACH TO IDENTIFY THE INFLUENCE OF HUBS ON FLEXIBLE SCHEDULING PROBLEMS |
|
Manzi, Filippo S.P.M.
Addressing Supply Chain Configuration Practices: Evidence from Italian Best Performer Valve Suppliers for the Oil & Gas Industry |
|
Mapfaira, Herbert
Sustainable Product Innovation for Customer Experience: A Conceptual Framework |
|
Marańa, Michael John
Forecasting of Stock Prices Using Brownian Motion – Monte Carlo Simulation |
|
maroo, parul
Need for Deployment of RFID Technology in Indian Hospital |
|
maroo, parul
Need for Deployment of RFID Technology in Indian Hospitals |
|
Need for Deployment of RFID Technology in Indian Hospitals |
|
Rework Reduction in KHS machinery Pvt. Ltd. |
|
Strengthening Life Line |
|
Mashhadi Alizadeh, Koorosh
Building Information Modeling (BIM): A Study to Prioritize Applications, Risks and Challenges |
|
Resource Management For Workflows In Cloud Computing Environment Based On Group Technology Approach |
|
Masike, Rujeko
Design of a Crushing and Propagation Screw Mechanism for Progressive Pelletising in Food Waste |
|
Masmali, Majed
Geometric Chip Analysis of Helical End Milling Based on a Variable Flow Stress Machining Theory |
|
MASOOD, SYED
A Way Forward to Attain Lean Manufacturing Status through Transformational Leadership |
|
Massaeli, Ali
Developing Productivity Monitoring System in a governmental organization with multi-performance objectives: A case study in National Iranian Gas Company |
|
Mastaneh, Zahra
Quantitative Optimization of Nurses in Emergency Department of Teaching Hospital: A case study |
|
Masuchun, Ruedee
Schedule Nervousness in Production Operations of an Airline Catering Company: The Challenge of an Effective Demand Response Program |
|
Mat Saman, Muhamad Zameri
Measuring Product Sustainability Using Fuzzy Method |
|
ProSET: A Decision Support System for Sustainability Performance Evaluation |
|
Mathavan, Senthan
Fuzzy AHP based Multi-Criteria Decisions Support System for Eco-Design |
|
Mathew, Manoj
Optimization of a Battery Pack in Plug-In Hybrid Electric Vehicles |
|
Mathew, Philip
Geometric Chip Analysis of Helical End Milling Based on a Variable Flow Stress Machining Theory |
|
Mathrani, Sanjay
The Impact of ICT Usage on Collaborative Product Development Performance: A Conceptual Model and Industry Perspective |
|
Mazhar, Muhammad Ilyas
An Investigation Into Bearing Fault Diagnostics for Condition Based Maintenance Using Band – Pass Filtering and Wavelet Decomposition Analysis of Vibration Signals |
|
Mbohwa, Charles
A Cleaner Production (CP) Perspective for the Metal Industry Processes: Case Study |
|
Application of Work Study for Productivity Improvement: A Case study of a Brewing Company |
|
Cleaner Production to Optimize Resource Consumption and Reduce Effluent Waste in a Beverage Plant |
|
Creating shared value in South Africa. A case study of Rustenburg and Emahlahleni regions |
|
Developing KPIs for organizations with similar objectives |
|
Dynamic capabilities and their direct impact on firm's Performance |
|
Evaluating Maintenance Strategies Effectiveness on Overall Equipment Utilization |
|
From Traditional to Modern Manufacturing System: Case Study |
|
Statistical Process Control (SPC) Application in a Manufacturing Firm to Improve Cost Effectiveness: Case study |
|
Sustainable Product Innovation for Customer Experience: A Conceptual Framework |
|
The Delphi technique: A credible research methodology |
|
The Impact of Lack in Occupational Health and Safety Implementation in Small Businesses |
|
The Impact of Maintenance Systems on Water Supply: A case Study of a Utility Company |
|
The Impact of Quality Management Tools in Municipal Water Distributors: Case of Namibia |
|
The Impact on the Operational Performance of Manufacturing Implementation Strategies |
|
The Implementation of Team development Process in Cooperative Enterprises |
|
Waste management for sustainable development in industrial parks. A case study of Wadeville industrial area, Johannesburg |
|
Md Akhir, Nur Asyraf
INVESTIGATION OF PROPAGATION AND PERMEABILITY MODIFICATION OF GRAFTED BENTONITE PARTICLES IN POROUS MEDIA |
|
Md Deros, Baba
The Challenge in Malaysian Industries in Implementing Design of Experiment |
|
MD ITHNAN, MOHD IZUDDIN
Aircraft Ground Movement Delay: A Descriptive Statistical Analysis at Kuala Lumpur International Airport |
|
Md Sirat, Rozlina
Estimation of compensation cost related to Musculoskeletal Disorder: Younger versus Older Malaysian Manufacturing Workers |
|
The Level of Safety Culture Beliefs and Practices Amongst Safety and Health Officers (SHOs) in Malaysian Manufacturing Companies |
|
Md Tap , Masine
Heat transfer through fire fighter's protective clothing exposed to thermal radiation. |
|
Md Zein, Raemy
Estimation of compensation cost related to Musculoskeletal Disorder: Younger versus Older Malaysian Manufacturing Workers |
|
Megawati, Chyntia
Application of Text Mining for Classification of Textual Reports: A Study of Indonesia's National Complaint Handling System |
|
Mehrolhasani , Mohammad Hosein
Quantitative Optimization of Nurses in Emergency Department of Teaching Hospital: A case study |
|
Mendoza Cortes, Valeria
INVENTORY, A TOOL TO IMPROVE HOSPITAL MANAGEMENT |
|
Logistic tools for increased the level of opportunity in the intervention in patients with hip fracture at "Hospital Universitario Mayor Mederi" case. |
|
Mesgarian, Reza
Use of Low Heating Value Natural Gas by Blending With Fuel Gas |
|
Micheli, Guido Jacopo Luca
Addressing Supply Chain Configuration Practices: Evidence from Italian Best Performer Valve Suppliers for the Oil & Gas Industry |
|
Supporting Decisions on Industrial Plant Modularization: A Case Study Approach in the Oil and Gas Sector |
|
Miguel, Lahoz
Prepositioning of relief goods under network uncertainty for tropical cyclones with information updates: a humanitarian supply chain |
|
Milana, Milana
Scheduling of Three FMS Layouts Using Four Scheduling Rules |
|
MIN-HOOI, CHUAH
In search of Malaysian companies with successful implementation of business intelligence initiatives |
|
Mir, Mustahsan
Modified Cluster Boundary Search Technique for Improved Layout Designs |
|
Mirza, Jahanzaib
CUSTOMER ORDERS PRIORITIZATION USING TOPSIS IN MULTI BUSINESS CHANNEL ENVIRONMENT |
|
Mishra, Rekha
Business Intelligence and Analytics: Paving way for Operational Excellence in Indian Banks |
|
Mishra, Vinaytosh
Capacity Planning For Diabetes Management -Indian Example |
|
Assessing Customer Requirements and Preferences for a Perishable Product: A Case of an Indian Cooperative Dairy |
|
Miyazaki, Junko
Importance of the Strategic Utilization of Information Technology in Small and Medium-Sized Food Manufacturers in Japan |
|
Moeis, Armand Omar
MODEL AND SIMULATION DESIGN OF STACKING RULES IN CONTAINER TERMINAL WITH DISCRETE EVENT SIMULATION APPROACH |
|
Moeis, Armand Omar
The dynamics of Indonesian rice supply chain |
|
Mohamed, Ali
Normative Gripping Strength data and its Distribution among Middle Eastern Teenage and Young Adults |
|
Mohamed Shaharoun, Awaluddin
The Level of Safety Culture Beliefs and Practices Amongst Safety and Health Officers (SHOs) in Malaysian Manufacturing Companies |
|
Mohammad, Musli
A REVIEW ON OPERATION DIAGNOSIS AND IDENTIFICATION OF OPERATION IMPROVEMENT |
|
Awareness, Implementation, Effectiveness and Future Adoption of Operational Improvement Initiatives: Survey Results |
|
The Effects of Lean Production Tools and Techniques Implementation at Malaysian Manufacturing and Service Industries: A Case Study Review |
|
Mohammadi, Maryam
Two Calibrated Metaheuristic Algorithms for Solving a Multi-Plant Capacitated Lot-Sizing Problem in an Integrated Production-Distribution Network |
|
Mohammed, Reiam
Optimization of Excess and Waste of Closed Loop Supply Chain System by Using Fuzzy Model |
|
Mohammed, Thabit Sultan
Remote-Controlled Microcontroller-Based Temperature System : An Economical Design |
|
Mohan, Nishith
Assessing Customer Requirements and Preferences for a Perishable Product: A Case of an Indian Cooperative Dairy |
|
Optimization Model for Advertisement Decision A Case of Cooperative Dairy |
|
MOHANTY, BISWAJITA
An Integrated Multi-Echelon Stochastic Supply Chain Production-Distribution Model With Carbon Emissions |
|
Mohd Darudin, Mohamad Zambri
Development of Comprehensive WIP Performance Monitoring Systems for Semiconductor Fabrication Foundry |
|
Mohd Darudin, Mohamad Zambri
Implementation in-situ auto polishing rate optimization for chemical mechanical planarization process in semiconductor fabrication industry |
|
Mohd Yusof, Sha'ri
Design Simulation and Information Dashboard for Manufacturing Control Using Systematic Approach: a Case Study of Hospital Beds Production |
|
Mohd Yusof, Sha'ri
Measuring Production Floor Performance Using Systematic Approach : a Case Study of Hospital Beds Production |
|
Mohd Yusof, Sha'ri
Proposed Lean Sustained Factors |
|
Mohd Yusuff, Rosnah
Ergonomics As a Lean Manufacturing Tool for Improvements in a Manufacturing Company |
|
Mohd Zainal, Affandi
Estimation of compensation cost related to Musculoskeletal Disorder: Younger versus Older Malaysian Manufacturing Workers |
|
Mokhlis, Ahmed
Critical Success Factors of Implementing Green Lean Six Sigma |
|
Production Management Model Integrating Green and Lean Six Sigma |
|
Mokhtar, Ainul Akmar
A Novel Multi-Objective and Multi-Criteria Decision Support System for Logistic Management during Flood Disaster |
|
Application of Logistic Regression in Resolving Influential Risk Factors Subject to Corrosion Under Insulation |
|
Mokhtar, Ainul Akmar
Comparative Analysis of Offshore Pipeline Reliability Using Degradation Analysis and PF Interval Models |
|
Mokhtar, BOURDIM
Reduction of chatter vibrations by management of the cutting tool |
|
Mokhtari, Majda
Investigation of structural and physical properties of Al1-xMnx thin films grown by magnetron sputtering: influence of thermal annealing |
|
Mollik, Sazib
Crystallization kinetics and thermal behaviors of nanoclay dispersed jute reinforced composite |
|
Moradlou, Hamid
Re-shoring Manufacturing through the application of Additive Technologies |
|
Morawaka, Iresha
An AHP Based Methodology to Evaluate Social Life Cycle of an Apparel Manufacturing Plant |
|
Mori, Masahito
Structural Analysis of Page Access Behaviors of Sessions at Website of a Housing Equipment Company |
|
Moros, Adriana
Assessing the effect of implementing a port community system platform in the response time of an international terminal: the case of a multi-cargo facility at the Colombian Caribbean coast |
|
Morssi, Maha
Sustainable Suppliers' Selection in Ready-Made Garments:Toward Sustainable Manufacturing |
|
Mostafa, Sherif
Mix Maker Ants: Inspiration for Multiple Objective Optimization |
|
Mota, Diogo
A Game-Theoretic Approach to Digital Marketing and Lead Generation for Duopoly Markets |
|
motebele, makhala mpho
Dynamic capabilities and their direct impact on firm's Performance |
|
Identifying Organisational best practices redesign: skills, grading and wage systems for synthesizing findings on WCM. |
|
The Impact on the Operational Performance of Manufacturing Implementation Strategies |
|
mouseli, Ali
Quantitative Optimization of Nurses in Emergency Department of Teaching Hospital: A case study |
|
Mouss, Hayet
Development of an internet-based fuzzy control system of manufacturing plant |
|
Using several intelligences for complex industrial process monitoring :detection and diagnosis |
|
Mpanza, Zanele
Identifying the root causes contributing to defects in order to minimize scrap |
|
Mubin, Ahmad
Development of Sustainable Performance Measurement System for Electronic and Plastics Industrial Cluster Based Industrial Symbiosis Scenario in the Industrial Estate |
|
Mucciardi, Frank
Debottlenecking of Conventional Copper Smelters |
|
muda, zurina
Android Maze Game for Children as an AutismTherapy |
|
Muhamad, Mohd Razali
Copper Sheet Resistance characteristics in the production staging time limitation study between Copper Seed and Copper Electroplating in Semiconductor Wafer manufacturing |
|
The Influence of Industrial Engineering in Semiconductor Fabrication Factory Optimization |
|
Muhammad, Masdi
A Comparative Study of ANFIS and ANNs Models for Performance-Based Condition Monitoring of Industrial Gas Turbines |
|
A Novel Multi-Objective and Multi-Criteria Decision Support System for Logistic Management during Flood Disaster |
|
Application of Logistic Regression in Resolving Influential Risk Factors Subject to Corrosion Under Insulation |
|
Prediction Of Failures By Using Crow/AMSAA Model In Microsoft Excel |
|
MUHAMMAD MALLICK, SUMAYEL
FIRE SAFETY AND AVAILABILITY OF FIRE FIGHTING EQUIPMENT IN SELECTED GARMENT FACTORIES IN BANGLADESH |
|
Müller, Egon
FSMER – Systematic Approach for Modeling Energy and Resource Efficient Factories |
|
Identification of Energy Efficiency Measures during Factory Planning Processes |
|
Mulyana, Ig Jaka
Performance Measurement in PT. XYZ Using The Balanced Scorecard (a case study of PT. XYZ) |
|
Munakata, Satoshi
An Improved Analogy-based Demand Forecasting Method for Service Parts |
|
PSI-Cockpit: A Supply-Demand Planning System Focusing on Achieving Goals through Resolving KPI Conflicts |
|
Mungwattana, Anan
A Practical Case Study of a Heterogeneous Fleet Vehicle Routing Problem with Various Constraints |
|
Murugesan, Rajmohan
Application of Material Flow Cost Accounting and System Dynamics Approach for Waste Reduction and Sustainable Food Manufacturing Development in Thailand |
|
musa, Haslinda
Analyzing the Adoption of Malaysian Standards (MS) on SME Performances: The Mediating Effects of Innovation Adoption Factors |
|
Musa, S. Nurmaya
Two Calibrated Metaheuristic Algorithms for Solving a Multi-Plant Capacitated Lot-Sizing Problem in an Integrated Production-Distribution Network |
|
Musa, Zairul Nisham Musa
Performance Management Criteria in Malaysian Healthcare |
|
Mushtaq, Fareeha
Ergonomic Risk Factors for Workers in Garments Manufacturing – A Case Study from Pakistan |
|
MUSTAPHA, NOR MAHIRAH
Performance Measurement System and Business Performance Measurement System: A Comparative Study |
|
Mutingi, Michael
Fuzzy heuristic approaches for healthcare staff scheduling |
|
Fuzzy Multi-Criteria Simulated Evolution for Nurse Re-rostering |
|
Sustainable Product Innovation for Customer Experience: A Conceptual Framework |
|
The Impact of Quality Management Tools in Municipal Water Distributors: Case of Namibia |
|
Mwanza, Bupe
Application of Work Study for Productivity Improvement: A Case study of a Brewing Company |
|
Evaluating Maintenance Strategies Effectiveness on Overall Equipment Utilization |
|
The Impact of Maintenance Systems on Water Supply: A case Study of a Utility Company |
|
Nabareseh, Stephen
Czech Students' Perception of Careers in the Shared Services Industry |
Top |
NACHIAPPAN, RAJA RAJESWARI
Numerical Modelling and Optimization of Square Microneedle Array for Efficient Transdermal Drug Delivery |
|
Nainggolan, Marihot
Understanding the Impulsiveness Effect of a Web Design on Online Fashion Stores |
|
Nait Said, Rachid
Modi?ed Barrier and Operational Risk Analysis using Bayesian approach: Towards Bayesian–BORA methodology |
|
NAKAJIMA, Michiyasu
How will MFCA make Usefulness on Sustainable Engineering? : Based on practical experiences in Japanese and Southwestern Asian companies |
|
Nakata, Yuya
Development of Effective Marketing Strategies for a Housing Equipment Company Based on Analysis of Sales Data and Sales Personnel |
|
Nakkiew, Wasawat
Application of Material Flow Cost Accounting (MFCA) and Quality Control Tools in Wooden Toys Product |
|
NANDA, SAHIL
Application of Fuzzy Logic and Fuzzy Systems in Machining: A Literature Review |
|
Grey fuzzy optimization of cutting parameters on Material Removal Rate and Surface Roughness of Aluminium |
|
Navarra, Alessandro
Debottlenecking of Conventional Copper Smelters |
|
Navarro, Bryan
Evaluations of Crossover and Mutation Probability of Genetic Algorithm in an Optimal Facility Layout Problem |
|
Navarro, Maricar
Evaluations of Crossover and Mutation Probability of Genetic Algorithm in an Optimal Facility Layout Problem |
|
Ndiaye, Malick
Capacitated Lot-Sizing and Scheduling with Sequence-Dependent setups in Petrochemical Plants |
|
Nedeltcheva, Galia Novakova
Rework Impact on BIW Production System Optimization Using Six Sigma Analysis |
|
Negash, Berihun Mamo
Conceptual Framework for Using System Identification in Reservoir Production Forecasting |
|
History matching of the PUNQ-S3 reservoir model using proxy modeling and multi-objective optimizations |
|
Nel, Hannelie
The Design of QTrac: an automated Quality and Cost Management System for Projects |
|
Ng, Artie
Second-movers' advantage of utilizing Big Data to enhance sustainability performance: the case of elevator industry |
|
Ng, Mykhael Clarenz
Prepositioning of relief goods under network uncertainty for tropical cyclones with information updates: a humanitarian supply chain |
|
Ngadiman, Yunos
Implementation of Fuzzy Inference System For Production Planning Optimisation |
|
Relationship between Human Errors in Maintenance and Overall Equipment Effectiveness in Food Industries |
|
The Development of 5s-Kaizen And Service Excellence Measurement Framework for Malaysia Private Hospitals |
|
Niizeki, Ryota
Applying Human Centered Design Process to Hitachi's Integrated Plant Construction System |
|
Nishiyama, Kakunoshin
Development of Effective Marketing Strategies for a Housing Equipment Company Based on Analysis of Sales Data and Sales Personnel |
|
Novak, Galia
An Innovative Holistic Approach to Optimal Portfolio Management |
|
Noval, Bagus
Two-level Supply Chain with Extended Warranty in Competitive Market Environment |
|
Nurcahyo, Rahmat
Feasibility Analysis of Indonesian Traditional Shipping Industry to Strengthen Domestic Maritime Logistic System |
|
Production Efficiency Improvement Through Preventive Maintenance and Production Scheduling Optimization |
|
Qualtiy Improvement in Plastic Based Toy Manufacturer Using Six Sigma Method |
|
Nusyirwan, Istas Fahrurrazi
Aircraft Ground Movement Delay: A Descriptive Statistical Analysis at Kuala Lumpur International Airport |
|
Nwanya, Stephen
Development of Facility Utilization Model for Use in Ajaokuta Steel Complex |
|
Process Variability Analysis of License Vehicle Number Plate Production in Nigeria |
|
Obaid, Raed
Optimizing the Final Exam Scheduling Process at King Abdulaziz University |
Top |
Ogbeifun, Edoghogho
Developing KPIs for organizations with similar objectives |
|
The Delphi technique: A credible research methodology |
|
Okada, Hisako
Applying Human Centered Design Process to Hitachi's Integrated Plant Construction System |
|
Okada, Kana
Impact of Introducing Material Flow Cost Accounting: A Comparative Review of Supply Chains and Individual Companies |
|
Okada, Masahiro
Analysis of VOC (Voice of Customer) Data for Assessing Corporate Image of a Housing Equipment Company |
|
Development of Effective Marketing Strategies for a Housing Equipment Company Based on Analysis of Sales Data and Sales Personnel |
|
Structural Analysis of Page Access Behaviors of Sessions at Website of a Housing Equipment Company |
|
Olanrewaju, Oludolapo
Model development to monitor and control energy consumption in South Africa |
|
OLANREWAJU ADETUNLA, ADEDOTUN
Developing manufacturing execution software as a service for small and medium size enterprise |
|
Olatunji, Obafemi
Development of Facility Utilization Model for Use in Ajaokuta Steel Complex |
|
oliveira, carlos
The importance of learning computer programming for engineers |
|
Olivos, Cano
Model of Logistics Management of the Supply Chain (LMSC) to Improve the Production Sector of Perishable Food Integrated by Small and Medium Enterprises in Mexico |
|
Olugu, Ezutah Udoncy
Analyzing optimization techniques in inventory models: the case of fuzzy economic order quantity problems |
|
The effect of human learning with cognitive and motor capabilities on a fuzzy EOQ model |
|
Omar, Badrul
The Effects of Lean Production Tools and Techniques Implementation at Malaysian Manufacturing and Service Industries: A Case Study Review |
|
Ong, Johann
Eliminating Salicide Residues in Wafer Fabrication Front-End Pre-Metal Layer Cleaning Process |
|
Ong, Steven
An Optimization Model for Managing System Inventories in a Disaster Supply Chain |
|
Ongchuan, Martin Julian
An Optimization Model for Managing System Inventories in a Disaster Supply Chain |
|
onu, Livinus
Anthropometric Data Variation Within Gari-frying Population |
|
Otero, Carlos
Quick methodology based in the SCOR model for supply chains reengineering of international trade |
|
Othman, Mohammad
Impact of Change Orders In Construction Sector In The West Bank |
|
Otieno, Wilkistar
Warranty Optimization for Remanufactured Products |
|
OUAZRAOUI, NOUARA
An alternative approach to criticality analysis of industrial risks |
|
Modi?ed Barrier and Operational Risk Analysis using Bayesian approach: Towards Bayesian–BORA methodology |
|
Using fuzzy set theory for determining the toxicity thresholds of product Case study: Food processing industry |
|
Oz, Dindar
Performance Evaluation of an Exact Method for the Obstacle Neutralization Problem |
|
P, MALLIGA
Numerical Modelling and Optimization of Square Microneedle Array for Efficient Transdermal Drug Delivery |
Top |
P, Onkar
Facility and Process Layout Analysis of an SME using Simulation: A Case Study of a Manufacturing Company |
|
Palang, Daraka
A Framework for Evaluating the performance of Thai Tourism Industry Supply Chain Management |
|
Pandian, Annamalai
Manufacturing cell layout improvement using Simulation Modeling and Group Technology |
|
Pararta, Wilhelmus Abisatya
Development of Root Cause Analysis Tool for Control Chart |
|
Park, Eui
Understanding Risk Perception Related to Trust and Bias in Cyberspace |
|
Parra, Roberto
Debottlenecking of Conventional Copper Smelters |
|
PARSA, MOSLEM
Selecting The Contractor using Multi Criteria Decision Making Case Study : National Gas Company of Lorestan province of Iran |
|
Parsaei, Hamid
EmployingTechnology To Customize The Flipped Classroom Practice |
|
Paternina, Carlos
Assessing the effect of implementing a port community system platform in the response time of an international terminal: the case of a multi-cargo facility at the Colombian Caribbean coast |
|
patil, anchal
Sonographer Ergonomics: assessment and workplace redesign |
|
Patil, Rajendra
: Enhancement of tube and tube Heat exchanger with semispherical hollow baffle for counter flow |
|
Design and Development of Drilling Jig for Spinning Rings used in Textile Industry |
|
Paul, Tanoy Kumar
Industrial Data Communication- PLC and External Application |
|
Optimized Measures to Improve TAT in Product Maintenance |
|
Pavlova, Inesa
The Significance of Riga Neighbourhoods for the Sustainable Economic Development of the City |
|
Pazhoheshfar, Peiman
In-house Crowdsourcing-based Entity Resolution using argumentation: Issue of Common Names |
|
Perera, Kanthi
Empirical Analysis and Modeling of Learning Curves in The Apparel Manufacturing Industry |
|
PHARWAHA, AMAR PARTAP SINGH
Virtual Instrument for Monitoring Process Parameters: A Versatie Tool for Engineering Education |
|
Philip, Deepu
A Modified ABC Algorithm with Genetic and Neighborhood Search for solving QAP |
|
PIERREVAL, Henri
Risk issues in facility layout design |
|
Poetri, Nabila Priscandy
Predicting The Development Time of Platform For Multiple-Generation Product Using Artificial Neural Network |
|
Pokkiyarath, Manoj
A MODEL TO ASSESS QUALITY OF DISASTER RELIIEF EFFORTS |
|
Poolperm, Pattarawadee
Application of Material Flow Cost Accounting (MFCA) and Quality Control Tools in Wooden Toys Product |
|
Pradeep, Beri
Improving Indian Healthcare using Data Mining |
|
Pratap Singh, Suraj
Facility and Process Layout Analysis of an SME using Simulation: A Case Study of a Manufacturing Company |
|
Premaratne, Priyadharshini
An AHP Based Methodology to Evaluate Social Life Cycle of an Apparel Manufacturing Plant |
|
Perception of female employees towards the Lean and work culture change in apparel industry in Sri Lanka |
|
Pretorius, Jan Harm Christiaan
Developing KPIs for organizations with similar objectives |
|
The Delphi technique: A credible research methodology |
|
Priyono, Anjar
Improving the quality of public transportation using Quality Function Deployement and Kano's Model |
|
Promentilla, Michael Angelo
Application of Monte Carlo Analytic Hierarchical Process (MCAHP) in the Prioritization of Theme Park Service Quality Elements |
|
pu, muhammad
Android Maze Game for Children as an AutismTherapy |
|
Puertollano, Innah Dominique
Determination of Burn-in Period Based on Reliabality Target for Product Failure Time with Weibull Distribution |
|
Pukite, Iveta
Energy Efficiency Improvement Opportunities in Latvia as a Sustainable Development Indicator |
|
Importance of Business Incubators for New Business and its Development in Latvia |
|
Pumkrachang , Santi
An Improvement on Shear Test Equipment for HGA and GR&R Analysis in a Magnetic Head Operation |
|
Qamar, Hafsa
On-Grid Solar Power Systems with Net Metering and Solar Irradiance in Pakistan |
Top |
Qamar, Summyia
Application Of Concurrent Engineering For Collaborative Learning And New Product Design |
|
CUSTOMER ORDERS PRIORITIZATION USING TOPSIS IN MULTI BUSINESS CHANNEL ENVIRONMENT |
|
Quader, M. Abdul
A review on photosynthetic bioenergy utilizing CO2 from plant flue gas: an approach on microalgae based third generation biofuels production |
|
R, Lokesha
Optimized Measures to Improve TAT in Product Maintenance |
Top |
Rabah, Bilal
Determination of Safety instrumented level using Fuzzy Risk Graph method Case study: Heater of oil& gas industry |
|
Rabie, Osama
Similarity Measures and Distance Measures Applications: An Analysis and Design of Systems prospective |
|
Rachmadi, Bayu
Applying the Analytical Hierarchy Process to Determine Upstream Competitiveness for Wedding-Planning Industry |
|
Rachman, Amar
Production Efficiency Improvement Through Preventive Maintenance and Production Scheduling Optimization |
|
Rachmania, Ilma Nurul
New Service Development Process in Micro, Small and Medium Enterprises (MSMEs): An Indonesian Case Study |
|
Radaideh, Khaldoon
RTOG Criteria to Evaluate Acute Skin Reaction and its Risk Factors in Patients with Head and Neck Cancer Submitted to IMRT Radiotherapy |
|
RAFIK, BAOUCHE
Facies Analysis and Permeability/porosity Prediction from well log data using the Non Parametric Regression with Multivariate Analysis and Neural Network in the Reservoirs of the Hassi R'Mel Southern Field (Algeria) |
|
Ragab, Adham
Determining the Effect of Key Process Parameters on Forming Force of Single Point Incremental Sheet Metal Forming |
|
Rahim, Abdur
Contour Approach for Analysis of Minimum Regions for the Economic Statistical Design of X-bar Control Charts |
|
rahim azmi, fadhlur
Analyzing the Adoption of Malaysian Standards (MS) on SME Performances: The Mediating Effects of Innovation Adoption Factors |
|
Rahimi Tehrani, Maryam
ANALYTICAL STUDY OF PECKING ORDER THEORY OF CAPITAL STUCTURE;EVIDENCE FROM MALAYSIA |
|
Rahiminezhad Galankashi, Masoud
Agile Supplier Selection: A Fuzzy Analytic Hierarchy Process (FAHP) Approach |
|
Rahiminezhad Galankashi, Masoud
Lean Supplier Selection: A Data Envelopment Analysis (DEA) Approach |
|
Rahman, Mainur
Development of a Computer Aided Learning Tool for PIC Microcontroller |
|
Rahman, Mashiour
Supply chain management in service Quality |
|
Rahman, Md. Atiar
A Model of a Secured Smart e-Health System |
|
Rahman, Md. Mizanur
Evaluate Performance of Earth – Air – Pipe System under Laboratory Condition |
|
Rahman, Md. Mizanur
Renewable energy policy in Germany and Malaysia: Success factors |
|
Save water to save our next generation |
|
Rahman, Mohammad
Predicting Seasonal Demand with Bayesian Generalized Linear Model |
|
Rahman, Shams
Hospital-Supplier Integration: an Assessment of the Driving Factors in the Context of the Saudi Arabian Healthcare System |
|
Raj, Harshita
An Intelligent feature based process planning for Rotational parts |
|
RAJA MOHD RASI, RAJA ZURAIDAH
Green Supply Chain Management: Do They Improves Operational Efficiency and Operational Performance |
|
Rajab, Zaid
A Taguchi-Continuous Simulation Approach to the Injection Molding Blowing Process Quality Improvement |
|
Rakhmaniar, Merlyn
New Service Development Process in Micro, Small and Medium Enterprises (MSMEs): An Indonesian Case Study |
|
Ramaratnam, Bishu
A MODEL TO ASSESS QUALITY OF DISASTER RELIIEF EFFORTS |
|
Ramkumar, J
A Modified ABC Algorithm with Genetic and Neighborhood Search for solving QAP |
|
Ramlan, Rohaizan
Implementation of Fuzzy Inference System For Production Planning Optimisation |
|
Relationship between Human Errors in Maintenance and Overall Equipment Effectiveness in Food Industries |
|
The Relationship between Leadership Styles and Quality Management Practices in Malaysian Manufacturing Firms |
|
Ramlan, Samad
Implementation in-situ auto polishing rate optimization for chemical mechanical planarization process in semiconductor fabrication industry |
|
Ramly, Edly Ferdin
A REVIEW ON OPERATION DIAGNOSIS AND IDENTIFICATION OF OPERATION IMPROVEMENT |
|
The Effects of Lean Production Tools and Techniques Implementation at Malaysian Manufacturing and Service Industries: A Case Study Review |
|
Ranasinghe, Thilini
Empirical Analysis and Modeling of Learning Curves in The Apparel Manufacturing Industry |
|
RANKA, RISHABH
An Integrated Multi-Echelon Stochastic Supply Chain Production-Distribution Model With Carbon Emissions |
|
Rappl, Christoph
Fostering creativity and innovation in engineering design education: A case study |
|
Rashid, Mohammad Mahfujur
Tidal Energy and its Prospects in Bangladesh |
|
rasti, amir
Investigation of surface integrity in high speed machining of Ti6Al4V alloy |
|
RATH, RAMESH CHANDRA
THE ROLE OF SERVICE PROVIDERS ON CLOUD COMPUTING TECHNOLOGY FOR A SUSTAINABLE COMPUTER NETWORK |
|
Rautela, Anubha
Assessing Customer Requirements and Preferences for a Perishable Product: A Case of an Indian Cooperative Dairy |
|
Optimization Model for Advertisement Decision A Case of Cooperative Dairy |
|
Raza, Tahir
Prediction Of Failures By Using Crow/AMSAA Model In Microsoft Excel |
|
Revino, Revino
Design Simulation and Information Dashboard for Manufacturing Control Using Systematic Approach: a Case Study of Hospital Beds Production |
|
Reyes, Maritza
Improvement of the manufacturing process of the salicylic acid |
|
RezaeeNik, Ebrahim
Building Information Modeling (BIM): A Study to Prioritize Applications, Risks and Challenges |
|
Rezg, Nidhal
An Optimal Preventive Maintenance Plan According to Power Generation for a Wind Turbine |
|
Production Optimization Problem under Carbone emission Constraint |
|
Rezki, Djamil
Using several intelligences for complex industrial process monitoring :detection and diagnosis |
|
Rezki, Nafissa
Using several intelligences for complex industrial process monitoring :detection and diagnosis |
|
Riaz, Hasnain
Effects of Value Stream Mapping in a Processing Industry |
|
Rimawan, Erry
Musculoskeletal Disorders Among Caregivers in Nursing Home |
|
Rithmanee, Dhiranantha
Creating shared value: How to guide for the Royal Project area |
|
Developing for Sustainable Lanna Cultural Tourism Area |
|
Firm's Policy Management by using ERP system |
|
Rodriguez-Lozano, Gloria
FINANCIAL INCLUSION IN COLOMBIA: EVOLUTION AND RELATIVE EFFICIENCY |
|
Rohani, Jafri
Aircraft Ground Movement Delay: A Descriptive Statistical Analysis at Kuala Lumpur International Airport |
|
Estimation of compensation cost related to Musculoskeletal Disorder: Younger versus Older Malaysian Manufacturing Workers |
|
The Level of Safety Culture Beliefs and Practices Amongst Safety and Health Officers (SHOs) in Malaysian Manufacturing Companies |
|
Rohayati, Yati
Development of the marketing training model for MSMEs |
|
Roudi, Danial
A Dynamic Multi Agent based scheduling for flexible flow line manufacturing system: UPVC door and window Company |
|
Routhier, François
Prioritization of patients with Communication Disorders |
|
Ruennareenard, Jidapah
Effect of Sintering Temperature on Hydroxyapatite Compact Scaffold Characteristics |
|
Supply Chain Management of Thai Parboiled Rice for Export |
|
Ruiz, Angel
A new risk-based dynamic approach for Prioritizing Surgical Patients' access to healthcare services |
|
Prioritization of patients with Communication Disorders |
|
Rusman, Muhammad
Optimization Planning for Logistics distribution of rice commodities in South Sulawesi |
|
Rusyaman, Endang
Mean-Variance Portfolio Optimization on Some Stocks By Using Non Constant Mean and Volatility Models Approaches |
|
S, Akshay
Improvising Operational Productivity of Inventory Management in a Retail Store |
Top |
S.S., Darly
Performance Analysis of Different Controller for PEMFC Fed Adjustable Speed Drives |
|
Saat, Aminuddin
Renewable energy policy in Germany and Malaysia: Success factors |
|
Saberi, Morteza
In-house Crowdsourcing-based Entity Resolution using argumentation: Issue of Common Names |
|
Next Generation of Interactive contact centre for efficient customer recognition |
|
Saberi, Zahra
Next Generation of Interactive contact centre for efficient customer recognition |
|
Sabone, Mogale
Framework for Decision Support Tool for Quality Control and Management in Botswana Manufacturing Companies |
|
Sabri, Yasmine
Addressing Supply Chain Configuration Practices: Evidence from Italian Best Performer Valve Suppliers for the Oil & Gas Industry |
|
sadeghi, mohammad hossein
Investigation of surface integrity in high speed machining of Ti6Al4V alloy |
|
Saha, Chanchal
Application Of Concurrent Engineering For Collaborative Learning And New Product Design |
|
CUSTOMER ORDERS PRIORITIZATION USING TOPSIS IN MULTI BUSINESS CHANNEL ENVIRONMENT |
|
Sahay, Mridula
AUGUMENTING EXCELLENCE IN MANUFACTURING: A STRATEGIC DYNAMIC APPROACH |
|
Improvising Operational Productivity of Inventory Management in a Retail Store |
|
Sai Prudhvi Siddhartha, Lakkimsetti
A Social Network Based Optimisation Approach on Patient Admission Scheduling Problem |
|
Said, Elfezazi
Production Management Model Integrating Green and Lean Six Sigma |
|
Said, Muhammad Asyraf
Solutions to ammoniacal nitrogen presence in CMP effluent from oxide process |
|
Saini, Anil Kumar
Business Intelligence and Analytics: Paving way for Operational Excellence in Indian Banks |
|
Towards Risk Managed Cloud Adoption A Conceptual Framework |
|
Sajjad, Muhammad Hamad
Six Sigma Implementation |
|
SALEH, Mohammed
Determining the Effect of Key Process Parameters on Forming Force of Single Point Incremental Sheet Metal Forming |
|
Saleheen, Ferdoush
Supply chain management in service Quality |
|
Salim, Bouslikhane
Production Optimization Problem under Carbone emission Constraint |
|
Salimi Beni, Saeed
Index Selection of Monitoring Technical Inspection Department in National Iranian Gas Company |
|
Samad, Abdul
Organizational factors for implementing TQFD |
|
Samanta, Suman
A Framework for Improving Productivity of SMEs Economically |
|
A Modified ABC Algorithm with Genetic and Neighborhood Search for solving QAP |
|
Samman, Shatha
Human Error in Multitasking Environments |
|
Sampaio, Paulo
Improving organizations performance through Supply Chain Quality Management practices |
|
Samuel, Cherian
Capacity Planning For Diabetes Management -Indian Example |
|
samuel, taiwo
Anthropometric Data Variation Within Gari-frying Population |
|
Anthropometric Data Variation Within Gari-frying Population |
|
Sandy, Ignatius
Understanding the Impulsiveness Effect of a Web Design on Online Fashion Stores |
|
Sani Bajgiran, Jalal
Building Information Modeling (BIM): A Study to Prioritize Applications, Risks and Challenges |
|
Sanjeevan, Nadarasa
Selecting the best layout for the container terminal using Modeling and Simulation Techniques |
|
saremi, sogol
A Multi Objective Robust Model for Capacity-Constraint Hub-Covering Flow Problem |
|
Sarpani, Sinta
Designing Process Improvement of Order Fulfillment in an Indonesian Lubricant Company Using Business Process Reengineering Method |
|
Sato, Chihiro
A Study on the Business Strategy of Highly Profitable Electronic Component Manufacturers |
|
Saxena, Kulbhushan
Towards Risk Managed Cloud Adoption A Conceptual Framework |
|
Schmidt, Thorsten
Simulation of Extended Resource Constrained Scheduling Problem with a Soft Computed Priority Heuristic |
|
Seifbarghy, Mehdi
Multi-server Congested Location Allocation Problem with Multiple Objectives |
|
Waiting time duration-constrained Close-Open Mixed Vehicle Routing Problem with Semi Soft Time Window solved by Genetic algorithm and Tabu Search |
|
Selamat, Mohamad Hisyam
HR Practices and organizational commitment among SME employees which leads to retention |
|
Senanayake, Chanaka
Empirical Analysis and Modeling of Learning Curves in The Apparel Manufacturing Industry |
|
SENGUNTHAR, DEEPAK PANNEER SELVAM
Selection of Green suppliers based on GSCM practices: Using fuzzy MCDM approach in an Indian Electronics Company |
|
Septivani, Nike
Research on BRT Driver Jakarta Fatigue Evaluation |
|
Sethi, Prabhneet Kaur
A study on the Profitability Analysis of Power Grid Corporation of India Ltd |
|
Optimal promotional policy for a new product in presence of firm's goodwill in Segmented Market: A control theoretic Approach |
|
Setiawan, Eko
Can Resource Sharing Improve Disaster Response Effectiveness? Evidence from West Sumatra Earthquake |
|
Setiawati, Cut Irna
Application System for Smart Supply Chain Management (SCM): Case Study of SMEs in Indonesia |
|
Applying the Analytical Hierarchy Process to Determine Upstream Competitiveness for Wedding-Planning Industry |
|
Setyana, Aditya Putra
Multi-Attribute Control Chart Design for Bronze Pipe Fittings Production |
|
setyaningsih, santi
New Service Development Process in Micro, Small and Medium Enterprises (MSMEs): An Indonesian Case Study |
|
Sevinc, Mete
Innovation Clusters and Determinants of Innovativeness in Manufacturing Industries |
|
Sewwandi, S.
Perception of female employees towards the Lean and work culture change in apparel industry in Sri Lanka |
|
shaban, yasser
Identifying Optimal Intervene Hazard for Cutting Tools Considering Cost-availability Optimization |
|
Visual data mining of faults in machining process based on machine learning |
|
Shafiee, Mahmood
Development of a condition index matrix to support technical feasibility of life extension in the offshore oil and gas industry |
|
Shafiq, Amber
Model of Violator Detector Network Problem: A case study Sioux Falls Network |
|
Shafizadeh, Hamid
The Psychology of the Competition in High-Tech Industries |
|
Shah, Bhavin
Design and assessment of lean handling buffers in forward-reserve model |
|
SHAH, ZAHID ABBASS
An Investigation of Lean Manufacturing Implementation in Textile Sector of Pakistan |
|
Ergonomic design of workstation for a labeling task |
|
Ergonomic Risk Factors for Workers in Garments Manufacturing – A Case Study from Pakistan |
|
Shahdi-Pashaki, Saleh
Resource Management For Workflows In Cloud Computing Environment Based On Group Technology Approach |
|
Shahjahan, Md
Use of Smokeless Tobacco by Low Socio-economic Populations and Risk Factors Associated with it |
|
shahmoradi-moghadam, hani
A Multi Objective Robust Model for Capacity-Constraint Hub-Covering Flow Problem |
|
Shaikh, Ghulam Yasin
Optimization of Loading Time of Pallets on Shifting Truck by Suggested Operating Procedure (SOP) at a Fast Moving Consumer Goods Producing Company. |
|
"Performance Evaluation"&"Problems Identifications in Warehouses" OF THIRD-PARTY Logistics |
|
Shaikh, Shakil
An investigation into the impact of advance manufacturing technologies implementation in SMEs manufacturing plastic packaging products- A case study of Pakistan |
|
Consideration of economics and ergonomics aspects in the design and manufacturing of Hydraulic Floor crane |
|
Effects of Value Stream Mapping in a Processing Industry |
|
Shama Zabeen, Shaik
A Social Network Based Optimisation Approach on Patient Admission Scheduling Problem |
|
Shamayleh, Abdulraim
Capacitated Lot-Sizing and Scheduling with Sequence-Dependent setups in Petrochemical Plants |
|
Cost Minimization in Data Batch Processing |
|
SHAMS KHORRAMABADI, HESHMAT
Selecting The Contractor using Multi Criteria Decision Making Case Study : National Gas Company of Lorestan province of Iran |
|
SHAMSUDDIN, ALINA
Workplace Ergonomics and Employees' Health: A Case Study at Automotive Manufacturer |
|
Sharif, Safian
Measuring Product Sustainability Using Fuzzy Method |
|
ProSET: A Decision Support System for Sustainability Performance Evaluation |
|
Shariff, Azmi Mohd
AHP-Based Conceptual Model for Selection of Key Elements for Safety Culture Using SMART Criteria |
|
Sharma, Ila
SOCIAL NETWORK ANALYSIS BASED EVOLUTIONARY ALGORITHIMIC APPROACH TO IDENTIFY THE INFLUENCE OF HUBS ON FLEXIBLE SCHEDULING PROBLEMS |
|
SHARMA, MEGHA
Reliable capacitated facility location problem: SAA based approach |
|
Sharma, R.R.K.
Determinants of the Scope of Supply Chain E-Collaboration |
|
Dual Based Procedure for the Single Stage General Minimum Cost Flow Problem |
|
Factors Affecting Consumers' purchasing Decision through E-Commerce |
|
Influence of culture on E-commerce and vice versa |
|
Key RFID implementation factors affecting "sourcing" decision of RFID systems in supply chain of manufacturing industry |
|
Relating E-integrated, Triple-A Supply Chain to Environmental Uncertainty, Market Competition and Firm Performance |
|
Relating Supply Chain E-Integration to Organizational Strategy |
|
Relating Supply Chain Risks to Supply Chain Strategy |
|
Sharma , Rohit
Selection of Green suppliers based on GSCM practices: Using fuzzy MCDM approach in an Indian Electronics Company |
|
Sharma, S K
Capacity Planning For Diabetes Management -Indian Example |
|
Assessing Customer Requirements and Preferences for a Perishable Product: A Case of an Indian Cooperative Dairy |
|
Optimization Model for Advertisement Decision A Case of Cooperative Dairy |
|
Sheikh, Farooq
Sniping as a Rational Strategy on Ebay |
|
Sheikh, Mohsin
Optimization of Loading Time of Pallets on Shifting Truck by Suggested Operating Procedure (SOP) at a Fast Moving Consumer Goods Producing Company. |
|
Shekarian, Ehsan
Analyzing optimization techniques in inventory models: the case of fuzzy economic order quantity problems |
|
The effect of human learning with cognitive and motor capabilities on a fuzzy EOQ model |
|
Sheu, Myron
Big Data Business Analytics: Attitude and Readiness |
|
shihata, Lamia
Introducing Radio Frequency Identifation into Lean Manufacturing ; An application in garment industry |
|
Shimakawa, Yoichi
An Analytical Framework for Local Impacts of Road Pricing Policy: A Case Study of the Tokyo Metropolitan Area |
|
An estimation of land price by kriging using geographic information system |
|
Shinde, Shivam
Design and Development of Drilling Jig for Spinning Rings used in Textile Industry |
|
SHIROUYEHZAD, HADI
Selecting The Contractor using Multi Criteria Decision Making Case Study : National Gas Company of Lorestan province of Iran |
|
Shuangquan, Huang
PSI-Cockpit: A Supply-Demand Planning System Focusing on Achieving Goals through Resolving KPI Conflicts |
|
Siahpour, Maral
Developing a Multi-objective Model for Locating a New Warehouse for Bama's Chain Store |
|
Siddique, Sara
Personal Competency Assessment and Competence Building: A Study of Pakistani Project Management Scholars |
|
Siddiqui, Farhan Qutab
Development of an Expert System for the Feasibility Assessment of Renewable Energy Projects |
|
Silva, Chathurani
The Impact of ICT Usage on Collaborative Product Development Performance: A Conceptual Model and Industry Perspective |
|
SINGARI, RANGANATH M.
Application of Fuzzy Logic and Fuzzy Systems in Machining: A Literature Review |
|
Grey fuzzy optimization of cutting parameters on Material Removal Rate and Surface Roughness of Aluminium |
|
SINGH, NAVPREET
Adjustable Turning Radius Steering Mechanism (Chandok's Raft steering system) |
|
SINGH, RAJ KUMAR
An Integrated Multi-Echelon Stochastic Supply Chain Production-Distribution Model With Carbon Emissions |
|
Singh, Rajdeep
SETUP TIME REDUCTION USING SMED IN A MANUFACTURING INDUSTRY: A CASE STUDY |
|
Singh, Rohit Kumar
VALUE CHAIN OPTIMIZATION IN OVERSEAS PROCUREMENT USING LPP |
|
SINGHAL, SHUBHAM
Application of Fuzzy Logic and Fuzzy Systems in Machining: A Literature Review |
|
Grey fuzzy optimization of cutting parameters on Material Removal Rate and Surface Roughness of Aluminium |
|
Sinha, Aman
VALUE CHAIN OPTIMIZATION IN OVERSEAS PROCUREMENT |
|
Sinha, Aman
VALUE CHAIN OPTIMIZATION IN OVERSEAS PROCUREMENT USING LPP |
|
Sinha, Priyank
Dual Based Procedure for the Single Stage General Minimum Cost Flow Problem |
|
Use of Interdiction Models to evaluate the Robustness of two Echelon Supply Chain for Minimum Service level |
|
Sirajuddin, Sirajuddin
Improving Indonesian logistics performance with using six sigma, DMAIC and integration Process |
|
Sirisawat, Pornwasin
A Study of Green Procurement Practices: A Case Study of the Computer Parts Industry in Thailand |
|
Siswanto, Nurhadi
Mathematical Model for Maritime Inventory Routing Problem with Multiple Time Windows |
|
Skeepers, Natalie
Driving safety performance in the construction industry through safety induction and training – as a leading measure |
|
Improving health and safety in the construction industry through cultural transformation |
|
Soliman, Mohamed
Enterprise Resource Planning (ERP) Systems in the Egyptian Higher Education Institutions: Benefits, Challenges and Issues |
|
Soonpracha, Kusuma
A Practical Case Study of a Heterogeneous Fleet Vehicle Routing Problem with Various Constraints |
|
Soonthornvipat, Thanyawan
Firm's Policy Management by using ERP system |
|
Sopadang, Apichat
THE ANALYSIS OF AIRPORT OPERATIONAL PERFORMANCE CASE STUDY: CHIANGMAI INTERNATIONAL AIRPORT, THAILAND |
|
Soroor, Javad
Autonomic Learning Algorithm to Predict Stock Price at the Exchange via Metaheuristics-Based Optimization |
|
Sorooshian, Shahryar
Performance Measurement System and Business Performance Measurement System: A Comparative Study |
|
SP, Srinivasan
IMPROVEMENT OF TEST CELL UTILIZATION USING SIX SIGMA METHODOLOGY |
|
Srivastava, Neelam
On the Energy detection of unknown signals over fading channel for different diversity combining techniques |
|
Staiti, Mujahed
Impact of Change Orders In Construction Sector In The West Bank |
|
SUBRAMANIAM, SUVITHA
FABRICATION OF FRACTURE AID USING RAPID PROTOTYPING |
|
Sudasna na Ayudthya, Prapaisri
D-Optimal Equivalent-Estimation Second-Order Strip-Strip-Plot Designs for Three Multi-Stage Processes |
|
Sudiro, Susanto
Design Simulation and Information Dashboard for Manufacturing Control Using Systematic Approach: a Case Study of Hospital Beds Production |
|
Measuring Production Floor Performance Using Systematic Approach : a Case Study of Hospital Beds Production |
|
Sudtachat, Kanchala
A Two-stage Stochastic Programming Model for Districting and Transportation Lot-size of Sugarcane |
|
Sukono, F
Mean-Variance Portfolio Optimization on Some Stocks By Using Non Constant Mean and Volatility Models Approaches |
|
Sulaeman, Erwin
A Prospective Solution for Consistent Aerostatic Lift for a Hybrid Buoyant Aircraft |
|
Sumita, Ushio
Analysis of VOC (Voice of Customer) Data for Assessing Corporate Image of a Housing Equipment Company |
|
Development of Effective Marketing Strategies for a Housing Equipment Company Based on Analysis of Sales Data and Sales Personnel |
|
Structural Analysis of Page Access Behaviors of Sessions at Website of a Housing Equipment Company |
|
Sumitani, Yasushi
An Analytical Framework for Local Impacts of Road Pricing Policy: A Case Study of the Tokyo Metropolitan Area |
|
Supian, Sudradjat
Applications De Bruijn Graphs of Hamiltonian and Eulerian Cycles to Fault Tolerant Networks |
|
Mean-Variance Portfolio Optimization on Some Stocks By Using Non Constant Mean and Volatility Models Approaches |
|
Supriatna, Asep Kuswandi
Applications De Bruijn Graphs of Hamiltonian and Eulerian Cycles to Fault Tolerant Networks |
|
Surapunt, Tisinee
Asssessment of Thai Check Point for Border Trade Operations |
|
Suresh Tiwari, Suman Tiwari
The Relationship between Leadership Styles and Quality Management Practices in Malaysian Manufacturing Firms |
|
SURESHKUMAR, SARANYA
FABRICATION OF FRACTURE AID USING RAPID PROTOTYPING |
|
Surjandari, Isti
Application of Text Mining for Classification of Textual Reports: A Study of Indonesia's National Complaint Handling System |
|
Multi-Attribute Control Chart Design for Bronze Pipe Fittings Production |
|
Review on some Multivariate Statistical Process Control Methods for Process monitoring |
|
Survilo, Tatjana
Increasing the competitiveness of the city with energy efficiency measures possibilities for Latvian cities |
|
Increasing the competitiveness of the city with energy efficiency measures – possibilities for Latvian cities |
|
The Significance of Riga Neighbourhoods for the Sustainable Economic Development of the City |
|
Susanto, Novie
Design of Human Cognitive Model in A Self-Optimizing Assembly Cell: A Case Study of Indonesian |
|
Suswanto, Rendhie
River's Rubbish Catcher Machine (RRC-Machine), The Planning of A Machine Instrument To Catch The Rubbish In the River Towards Healthy Environment |
|
Suwanwong, Tipavinee
THE ANALYSIS OF AIRPORT OPERATIONAL PERFORMANCE CASE STUDY: CHIANGMAI INTERNATIONAL AIRPORT, THAILAND |
|
Suyudi, Mochamad
Applications De Bruijn Graphs of Hamiltonian and Eulerian Cycles to Fault Tolerant Networks |
|
Suzianti, Amalia
Designing Laptop Based On Costumer Preference Using ECQFD and TRIZ Methods |
|
Predicting The Development Time of Platform For Multiple-Generation Product Using Artificial Neural Network |
|
Suzuki, Toshihiro
Applying Human Centered Design Process to Hitachi's Integrated Plant Construction System |
|
Sy, Charlle
A Decision Support Model for Spare Parts Inventory in a Multi-Echelon Closed Loop Supply Chain |
|
An Optimization Model for Managing System Inventories in a Disaster Supply Chain |
|
Sy, John Derrick
Prepositioning of relief goods under network uncertainty for tropical cyclones with information updates: a humanitarian supply chain |
|
Syarkawi Rauf, Muhammad
Improving Indonesian logistics performance with using six sigma, DMAIC and integration Process |
|
Syed, Nazish Quadri
Design and Manufacturing of Automobile Testing Track Sweeping Machine |
|
Sygulla, Ronny
Framework of an '(In)Efficiency Costing' based on the idea of Material Flow Cost Accounting |
|
Material Flow Cost Accounting in Supply Chains – Challenges and Approaches |
|
Taha, Mandy
Near Optimal Solution for Green Vehicle Routing Problem |
Top |
Tahan-Bouria, Mohammadreza
A Comparative Study of ANFIS and ANNs Models for Performance-Based Condition Monitoring of Industrial Gas Turbines |
|
Taheri, Javad
Case Averaging as a Tool for Operational Efficiency in GI Endoscopy |
|
Takagi, Hiroaki
Analysis of VOC (Voice of Customer) Data for Assessing Corporate Image of a Housing Equipment Company |
|
Takahashi, Hirotaka
An Analytical Framework for Local Impacts of Road Pricing Policy: A Case Study of the Tokyo Metropolitan Area |
|
Takale, Suraj
Design and Development of Drilling Jig for Spinning Rings used in Textile Industry |
|
Takeda, Hitosh
Debugging Operation of Automated Assembly Lne using Signal Noise Ratio |
|
Takegami, Eizaburo
Applying Human Centered Design Process to Hitachi's Integrated Plant Construction System |
|
Taki, Seiko
Study on Life Log of Female Parent during Child Care in Japan |
|
talaat, Amr
Introducing Radio Frequency Identifation into Lean Manufacturing ; An application in garment industry |
|
TAMBE, PRAVIN
A Methodology for Simultaneously Optimizing Selective Maintenance Decision and X-Control Chart Parameters |
|
Cost Based Failure Consequence Approach for Identifying Critical Components for Maintenance Support Decision |
|
Tan, Bee Hoon
Eliminating Salicide Residues in Wafer Fabrication Front-End Pre-Metal Layer Cleaning Process |
|
Tan, Chan Sin
Diverse Possibility of Fit Manufacturing Principle Into Value Stream Mapping(VSM) and Its Impact: A Review |
|
Productivity Assessment Based on Different Perspectives in Industries: A Review |
|
Tangamporn, Napassawan
Creating shared value: How to guide for the Royal Project area |
|
Tansuchat, Roengchai
Supply Chain Management of Thai Parboiled Rice for Export |
|
Tantiphanwadi, Prapassorn
D-Optimal Equivalent-Estimation Second-Order Strip-Strip-Plot Designs for Three Multi-Stage Processes |
|
Taran, Ekaterina
YOUR OPINION MATTERS: A CROSS-SECTIONAL STUDY ON HAPPINESS AMONG OLDER ADULTS IN SIBERIA |
|
Tatehora, Kazuto
Applying Human Centered Design Process to Hitachi's Integrated Plant Construction System |
|
Tavakoly Nabavy, Niloofar
Identifying Factors Affecting Entrepreneurial Sustainable Development (Case Study: Knowledge-Based Start-Ups of Science and Technology Park of Tehran University) |
|
Tayyab, Aisha
Application Of Concurrent Engineering For Collaborative Learning And New Product Design |
|
Teoh, Yong Siang
Hidden Wastes in Overall Equipment Effectiveness (OEE) under the study of Maynard's Operation Sequence Technique (MOST) |
|
Tesavrita, Ceicalia
Analyzing Technical and Social Dimension in Knowledge Sharing Intention Behavior in E-learning System |
|
Teymourian, Ehsan
Resource Management For Workflows In Cloud Computing Environment Based On Group Technology Approach |
|
Tezuka, Masaru
An Improved Analogy-based Demand Forecasting Method for Service Parts |
|
Importance of the Strategic Utilization of Information Technology in Small and Medium-Sized Food Manufacturers in Japan |
|
Thaba, Sebonkile
The Impact of Lack in Occupational Health and Safety Implementation in Small Businesses |
|
The Implementation of Team development Process in Cooperative Enterprises |
|
thampi, hari krishnan
Organizational factors for implementing TQFD |
|
Thanyarak, Thidarat
APPLICATION OF THE SIX-SIGMA CONCEPT TO TIME REDUCTION FOR RESIN RECIRCULATE RINSE IN DEMINERALIZED WATER PRODUCTION |
|
Theko, Sydney
The impact of Process Improvement initiatives in manufacturing industry in South Africa |
|
Thongrattana, Phatcharee
The Impact of Structure of Interdependence on Supplier Performance in the Local Pineapple Processing Supply Chain in Thailand: a Mixed Method Research |
|
Tipmontian, Jedsada
Application of Material Flow Cost Accounting and System Dynamics Approach for Waste Reduction and Sustainable Food Manufacturing Development in Thailand |
|
Tippayawong, Korrakot Y.
A Build-or-Lease Case Study for a Potential New Warehouse Due To Increasing Storage Capacity Requirements |
|
Tippayawong, Korrakot Yaibuathet
A Framework for Evaluating the performance of Thai Tourism Industry Supply Chain Management |
|
Tjiang, Lien
Performance Measurement in PT. XYZ Using The Balanced Scorecard (a case study of PT. XYZ) |
|
Toth, Peter
Learning strategies of post-secondary students |
|
Touriki, Fatima Ezzahra
Road Map for the Implementation of Lean production tools in SMEs |
|
Travaglini, Agnese
Megaproject case studies: a stakeholder management perspective |
|
Supporting Decisions on Industrial Plant Modularization: A Case Study Approach in the Oil and Gas Sector |
|
Triantoro, Wegit
Feasibility Analysis of Indonesian Traditional Shipping Industry to Strengthen Domestic Maritime Logistic System |
|
Tu, Zhengkai
Thermochemical Processing of Biomass: Graphic User Interface Models for Costing and Material Balances |
|
Tuntitippawan , Naritsak
An Artificial Bee Colony Algorithm for the Vehicle Routing Problem with Backhauls and Time Windows |
|
Uddin, M. Alhaz
Optimal Control Applied to Dynamic Model of Climate Change: A Bangladesh Scenario |
Top |
Uddin, Moin
Productivity Improvement of Cutting, Sewing and Finishing Sections through Value Stream Mapping - A Case Study. |
|
ul Haque, Anwar
A Prospective Solution for Consistent Aerostatic Lift for a Hybrid Buoyant Aircraft |
|
Ulinuha, Agus
Application of Decoupled Harmonic Power Flow for Assessment of Harmonic Passive Filter Size and Location |
|
Ulusoy, Gündüz
Innovation Clusters and Determinants of Innovativeness in Manufacturing Industries |
|
Uppala, Akshay
Selection of Green suppliers based on GSCM practices: Using fuzzy MCDM approach in an Indian Electronics Company |
|
Urabe, Shintaro
PSI-Cockpit: A Supply-Demand Planning System Focusing on Achieving Goals through Resolving KPI Conflicts |
|
V.R., Pramod
Organizational factors for implementing TQFD |
Top |
Vali, Lila
Quantitative Optimization of Nurses in Emergency Department of Teaching Hospital: A case study |
|
Van Wyk, Therese
Model development to monitor and control energy consumption in South Africa |
|
vatankhah barenji, ali
A Dynamic Multi Agent based scheduling for flexible flow line manufacturing system: UPVC door and window Company |
|
Developing manufacturing execution software as a service for small and medium size enterprise |
|
Vatankhah Barenji , Reza
A Dynamic Multi Agent based scheduling for flexible flow line manufacturing system: UPVC door and window Company |
|
Developing manufacturing execution software as a service for small and medium size enterprise |
|
Venkatesh, Madhupreetha
Minimizing fluctuation in commodity pricing using Dynamic Simulation |
|
Verma, Pratima
Facility and Process Layout Analysis of an SME using Simulation: A Case Study of a Manufacturing Company |
|
Structure, Evaluation System, and Employee Resistance: Impediments to Horizontal Strategy Implementation in Diversified Corporations |
|
The Linkages between Horizontal Strategy, Person-Environment fit and Horizontal Fit: An Empirical study |
|
The Role of Management Control System in ERP Project Implementation |
|
Victor, Berlin Hency
A Survey Of Routing Protocols Of Wireless Sensor Network With Mobile Sinks |
|
Victor Makarovich , Zaernjuk
Analyzing the Success Rate of Strategic and Tactical Economic Sanctions; A strategy for Russian economic planning |
|
Developing a Risk Based Maintenance; A Case study - Low Density Polyethylene (LDPE) production unit of Amir Kabir Petrochemical complex in Iran |
|
Villamin, Josephine
PROBLEM-SOLVING, DECISION MAKING AND MANAGERIAL SKILLS OF ENGINEER-MANAGERS IN SELECTED SMALL-TO-LARGE SCALE ENTERPRISES IN LAGUNA |
|
Villanueva, Rachel
Assessment on 5S System of Rules in a Cosmetics Manufacturing's Central Weighing Area, Processing and Packaging Area for Creams, Liquids and Lotions (CLL) |
|
Improvement of Productivity Rate of JIT #262, Creams, Liquids, Lotions Department of a Cosmetics Company |
|
Villarreal, Bernardo
A Proposed Hybrid Scheme for Eliminating Road Transportation Waste |
|
A Sequential Truck Transportation Waste Reduction Scheme |
|
Hybrid Schemes for Eliminating Road Transportation Waste |
|
VISHVAKARMA, NIRAJ KUMAR
Key RFID implementation factors affecting "sourcing" decision of RFID systems in supply chain of manufacturing industry |
|
Völker, Michael
Simulation of Extended Resource Constrained Scheduling Problem with a Soft Computed Priority Heuristic |
|
Vosoughi, Shiva
Identifying Factors Affecting Entrepreneurial Sustainable Development (Case Study: Knowledge-Based Start-Ups of Science and Technology Park of Tehran University) |
|
vps Bathusha Hamind , Mehrunishah Begum
HR Practices and organizational commitment among SME employees which leads to retention |
|
Vyas, Ronak
Optimal Aggregate Production Planning by using Genetic Algorithm |
|
Wahab, Eta
Workplace Ergonomics and Employees' Health: A Case Study at Automotive Manufacturer |
Top |
wahba, michael
Introducing Radio Frequency Identifation into Lean Manufacturing ; An application in garment industry |
|
Wahid, Abdul
Consideration of economics and ergonomics aspects in the design and manufacturing of Hydraulic Floor crane |
|
Wang, Yao-Chin
Project Management for New Sputtering System Development |
|
Wangphanich, Pilada
A Study of Green Procurement Practices: A Case Study of the Computer Parts Industry in Thailand |
|
WANITWATTANAKOSOL, Jirapat
Asssessment of Thai Check Point for Border Trade Operations |
|
WARA, TRITHAM
Remote Global Alignment Error for Pad Inductor Layer To Improve The Cycle Time |
|
wasim, ahmad
Application Of Concurrent Engineering For Collaborative Learning And New Product Design |
|
Wattanutchariya, Wassanai
Effect of Sintering Temperature on Hydroxyapatite Compact Scaffold Characteristics |
|
Supply Chain Management of Thai Parboiled Rice for Export |
|
Wejwitwarakul, Jiratthavee
Application of Lean Manufacturing Concepts to Reduce Manufacturing Lead Times within the Meatball Production Process |
|
Wibisono, Dermawan
Proposed Performance Management System for Indonesian Ministry of Health Using Integrated Performance Management System |
|
Wibowo, Alan Dwi
The dynamics of Indonesian rice supply chain |
|
Wichaisri, Sooksiri
Asssessment of Thai Check Point for Border Trade Operations |
|
Widada, Hari
OPTIMIZATION OF THE ACID CATALYST CONCENTRATION FOR SYNTHESIS OF ANTI-CANCER AGENT GAMAVUTON-0 BY USING MATHEMATICAL AND STATISTICAL SOFTWARE |
|
Widiastri, Dhea
Understanding the Impulsiveness Effect of a Web Design on Online Fashion Stores |
|
Widyadana, Gede Agus
Inventory Routing Problem for Deteriorating Items with Multi Tours |
|
Wijaya, Didy Putra
OPTIMIZATION OF THE ACID CATALYST CONCENTRATION FOR SYNTHESIS OF ANTI-CANCER AGENT GAMAVUTON-0 BY USING MATHEMATICAL AND STATISTICAL SOFTWARE |
|
Wirapraceka, Indra
Proposed Performance Management System for Indonesian Ministry of Health Using Integrated Performance Management System |
|
Wisittipanich, Warisa
Particle Swarm Optimization for Just-In-Time Trucks Scheduling in Cross Docking Terminals |
|
Wong, Adam
Second-movers' advantage of utilizing Big Data to enhance sustainability performance: the case of elevator industry |
|
Wong, Jing Ping
Critical Success Factors of Six Sigma Implementation in Malaysian Manufacturing Industry |
|
Wong, Whee Yen
A Case Study Assessment of Project Management Maturity Level in the Malaysia's IT Industry |
|
Wongweragiat, Sudaratana
The Impact of Structure of Interdependence on Supplier Performance in the Local Pineapple Processing Supply Chain in Thailand: a Mixed Method Research |
|
Wood, Joseph
An Investigation Into Bearing Fault Diagnostics for Condition Based Maintenance Using Band – Pass Filtering and Wavelet Decomposition Analysis of Vibration Signals |
|
Wu, Wen-Fang
Reliability Analysis of a Motor Control Unit Used in Electric Vehicles |
|
Wulandari, Sari
Development of the marketing training model for MSMEs |
|
Wulff, Alfred
Integration of Business Process management and Big Data technologies |
|
Wunck, Christoph
Implementation of Mobile Event Monitoring Agents for Manufacturing Execution and Intelligence Systems Using a Domain Specific Language |
|
Integration of Business Process management and Big Data technologies |
|
Wut, Edmund
Second-movers' advantage of utilizing Big Data to enhance sustainability performance: the case of elevator industry |
|
Xiaofeng, Hui
Investigation of Trade Credit Patterns in Effect with Bank Loan Availability |
Top |
Yaakub, Noor Hamizah
Awareness, Implementation, Effectiveness and Future Adoption of Operational Improvement Initiatives: Survey Results |
Top |
Yacout, Soumaya
Identifying Optimal Intervene Hazard for Cutting Tools Considering Cost-availability Optimization |
|
Visual data mining of faults in machining process based on machine learning |
|
Yahya, Mohd Shahir
A REVIEW ON OPERATION DIAGNOSIS AND IDENTIFICATION OF OPERATION IMPROVEMENT |
|
Awareness, Implementation, Effectiveness and Future Adoption of Operational Improvement Initiatives: Survey Results |
|
The Effects of Lean Production Tools and Techniques Implementation at Malaysian Manufacturing and Service Industries: A Case Study Review |
|
Yap, Seok Gee
A Case Study Assessment of Project Management Maturity Level in the Malaysia's IT Industry |
|
Yeoh, Kar Peng
A Case Study Assessment of Project Management Maturity Level in the Malaysia's IT Industry |
|
Yi, Zelong
A New Software Reliability Growth Model with Introduction of New Defects in the Test Process |
|
Yildirim, Serkan
Disambiguation Points Sampling Heuristic for the Stochastic Obstacle Scene Problem |
|
Yokosuka, Yasuaki
Applying Human Centered Design Process to Hitachi's Integrated Plant Construction System |
|
Yokoyama, Hajime
Resolution of Resource Contentions in the Critical Chain Project Management based on Simulated Annealing |
|
Yousef, Hassan
Prediction of Oil Well Flowing Bottom-hole Pressure in Petroleum Fields |
|
Yuangyai, Chumpol
Multiple Performance Optimization forHuman-Robot Collaboration: a Translation Motion in a Tele-Sandblasting Maintenance System |
|
Yudha, Irham Satria
Designing Laptop Based On Costumer Preference Using ECQFD and TRIZ Methods |
|
Yuniarto, Hari Agung
Development of Root Cause Analysis Tool for Control Chart |
|
Yusuf, Ike Mercia
Analyzing Technical and Social Dimension in Knowledge Sharing Intention Behavior in E-learning System |
|
Z.Sutalaksana, Iftikar
Fatigue from driving – a comparison between morning and afternoon tasks |
Top |
Zaghloul, Mohamed
Tolerance Analysis using An alternative to Monte Carlo simulation |
|
Zagloel, Teuku Yuri M.
Improving Indonesian logistics performance with using six sigma, DMAIC and integration Process |
|
Literature review of Industrial Competitiveness Index : research gap |
|
Literature review of Physical Delivery Service Quality : type of research and research gap |
|
Motion and Time Study : Measurement of Workstation For Piston Assembly Line Considering Anthropometric For Indonesian People |
|
Zahid, Taiba
Simulation of Extended Resource Constrained Scheduling Problem with a Soft Computed Priority Heuristic |
|
Zai, Jazib
Optimization of Loading Time of Pallets on Shifting Truck by Suggested Operating Procedure (SOP) at a Fast Moving Consumer Goods Producing Company. |
|
Zainol, Zaina Norhallis
Heat transfer through fire fighter's protective clothing exposed to thermal radiation. |
|
Zantua, Sherilyn
Optimization of Warehouse Operations for Logistics Company in the Philippines |
|
Optimization of Warehouse Operations for Logistics Company in the Philippines |
|
Zeltins, Namejs
Energy sector process control system to ensure achievement of energy efficiency targets in Latvia: a case study |
|
Zermane, Hanane
Development of an internet-based fuzzy control system of manufacturing plant |
|
Zghair, Hayder
Rework Impact on BIW Production System Optimization Using Six Sigma Analysis |
|
Zhang, Yao
Project Investment Decision Considering Background Risks |
|
Zia, Babak
Identifying Factors Affecting Entrepreneurial Sustainable Development (Case Study: Knowledge-Based Start-Ups of Science and Technology Park of Tehran University) |
|
Zied, Hajej
An Optimal Preventive Maintenance Plan According to Power Generation for a Wind Turbine |
|
Production Optimization Problem under Carbone emission Constraint |
|
Zulkifli, Ahmad Syahmi Arham Bin
Minimum Quantity Lubrication in Micromachining: A Greener Approach |
|
Zuraida, Rida
Fatigue from driving – a comparison between morning and afternoon tasks |
|
Research on BRT Driver Jakarta Fatigue Evaluation |
|
