Proceedings – Sixth Annual Conference on Industrial Engineering and Operations Management
March 8-10, 2016, Kula Lumpur, Malaysia

ISSN: 2169-8767 (U.S. Library of Congress) ISBN: 978-0-9855497-4-9

Abbasi, Zahid Ali
Optimization of Loading Time of Pallets on Shifting Truck by Suggested Operating Procedure (SOP) at a Fast Moving Consumer Goods Producing Company.

Abd Ghani, Rasli
Design of Single-Phase Grid-Connected Based on Dual-MPPT for Photovoltaic Generation Systems

Abd Wahab, kader Ibrahim
SEMICONDUCTOR FABRICATION STRATEGY FOR CYCLE TIME AND CAPACITY OPTIMIZATION: PAST AND PRESENT

Abdalkadir, Niveen
Build Up of Copper EDM Electrode by Using Galvanic Plating Process

Investigation on Corrosion Behavior of The Al/SiC Nanocomposites in Sea Water

Abdela, Abebayehu
Leanness Assessment for Adapting Lean Manufacturing Principles to Textile Processing

Abdelgalil, Mohammed
A Discrete-Event and Agent-Based Hybrid Simulation Approach for Healthcare Systems Modeling and Analysis

Abdelghfour, BOURDIM
Reduction of chatter vibrations by management of the cutting tool

Abderrahmane, Bellaouar
Desalination of Seawater Research Project on the Basis of the Positive Results of Water Treatment by Magnetic Field

Impact of the geometrical parameters of labyrinth seal on the efficiency of gas pumping unit

Abderrahmane, MELLAK
CHARACTERIZATION AND MODELING OF RHEOLOGICAL BEHAVIOR OF A SYSTEM OF MUD A REVERSE EMULSION

The environmental impact of inputs used in the vitiviniculturalsector in Algeria

Abdoos, Hassan
Using Tolerated Risk for Solving Hazardous Material Routing Problem by Preemptive Goal Programming Approach

Abdou, Sameh
A Discrete-Event and Agent-Based Hybrid Simulation Approach for Healthcare Systems Modeling and Analysis

Abdul Aziz, Mohamed Ariff Shri
Implementation in-situ auto polishing rate optimization for chemical mechanical planarization process in semiconductor fabrication industry

Solutions to ammoniacal nitrogen presence in CMP effluent from oxide process

Abdul Hamid, Nor Aziati
Awareness, Implementation, Effectiveness and Future Adoption of Operational Improvement Initiatives: Survey Results

Critical Success Factors of Six Sigma Implementation in Malaysian Manufacturing Industry

Relationship between Human Errors in Maintenance and Overall Equipment Effectiveness in Food Industries

The Development of 5s-Kaizen And Service Excellence Measurement Framework for Malaysia Private Hospitals

Workplace Ergonomics and Employees’ Health: A Case Study at Automotive Manufacturer

Abdul Karim, Zainal Ambri
A Comparative Study of ANFIS and ANNs Models for Performance-Based Condition Monitoring of Industrial Gas Turbines

Abdul Khalid, Fararishah
Analyzing the Adoption of Malaysian Standards (MS) on SME Performances: The Mediating Effects of Innovation Adoption Factors

Abdul Rahim, Abdul Rahman
Knowledge Management (KM) in Human Error (HE) in Accident Prevention

Abdul Rahman, Ismail
Estimation of compensation cost related to Musculoskeletal Disorder: Younger versus Older Malaysian Manufacturing Workers

Abdul Rahman, Md Nizam
Copper Sheet Resistance characteristics in the production staging time limitation study between Copper Seed and Copper Electroplating in Semiconductor Wafer manufacturing

Abdul Wahid, Mazlan
Renewable energy policy in Germany and Malaysia: Success factors

Abdul-Rashid, Salwa Hanim
Analyzing optimization techniques in inventory models: the case of fuzzy economic order quantity problems

The effect of human learning with cognitive and motor capabilities on a fuzzy EOQ model

Al-Sadawi, Alia
Cost Minimization in Data Batch Processing

Abdullah, Hanan
STUDENTS ATTENDANCE SYSTEM IN FACULTY OF ENGINEERING AT KING ABDULAZIZ UNIVERSITY

Abdullah, Nor Hazana
The Development of 5s-Kaizen And Service Excellence Measurement Framework for Malaysia Private Hospitals

Workplace Ergonomics and Employees’ Health: A Case Study at Automotive Manufacturer

Abdullah, Nor Suhada
Ergonomics As a Lean Manufacturing Tool for Improvements in a Manufacturing Company

Abdullah, Sari
Capacitated Lot-Sizing and Scheduling with Sequence-Dependent setups in Petrochemical Plants

Abdullah, Umer
Effects of Value Stream Mapping in a Processing Industry

Abdulrazik, Abdulhalim
A Review of Models for Optimal Bio-products Syntheses from Oil Palm Empty Fruit Bunch (EFB)

Thermochemical Processing of Biomass: Graphic User Interface Models for Costing and Material Balances

Abolhallaj, Mahyar
A Review of Models for Optimal Bio-products Syntheses from Oil Palm Empty Fruit Bunch (EFB)

Abotaleb, Ibrahim
Genetic Algorithms For Two-Phase Construction Dynamic Site Layout

Abu Hassan Asaari, Muhammad Hasmi
Transforming green logistics practice into benefits: a case of 3PLs

Acevedo, Baudilio
Improvement of the manufacturing process of the salicylic acid

Achebe, Celestine
Process Variability Analysis of License Vehicle Number Plate Production in Nigeria

Actina, Gita
Energy sector process control system to ensure achievement of energy efficiency targets in Latvia: a case study

Management of energy efficient processes in residential and public buildings at regional level: a Case Study of Latvia

Adegbite, Adeyemi
Anthropometric Data Variation Within Gari-frying Population

Adetifa, Babatunde
Anthropometric Data Variation Within Gari-frying Population

Adhikari, Arnab
An Efficiency and Consistency Based Approach for Selecting the Best Cricket Team

An investigation into the urban bus route performance using a modified DEA Model: A case study of Kolkata bus transport

Coordinating a Multi-echelon Apparel Supply Chain in the Presence of Supply and Demand Uncertainty

Adogoba, Desmond S.
Yield Stability and Genotype by Environment Interaction of Fifteen Rice (Oryza Sativa L) Genotypes Evaluated under Rainfed and Irrigated Conditions in Northern Ghana

Affandi Zega, Risnal
River’s Rubbish Catcher Machine (RRC-Machine), The Planning of A Machine Instrument To Catch The Rubbish In the River Towards Healthy Environment

Afzal, Farzana
Valued Supply Chain: The imminent Frontier For Improved Hospital Management

Agarwal, Rupali
On the Energy detection of unknown signals over fading channel for different diversity combining techniques

Agrawal, Anil Kumar
Heterogeneous Vehicle Routing Problem in a Supply Chain

AGRAWAL, SHILPA
ANALYZING THE EFFECT OF LINE-CELL CONVERSION ON MANUFACTURING SYSTEMS

Agwa-Ejon, John
The Delphi technique: A credible research methodology

Ahadiat, Mohammad Reza
Design of control system for Electric Power Steering in vehicle

Ahamed, Raihan
Conversion of Waste Plastics into Gasoline and Diesel

AHMAD, Ali
Human Error in Multitasking Environments

Ahmad, Anuar Fadzil
Copper Sheet Resistance characteristics in the production staging time limitation study between Copper Seed and Copper Electroplating in Semiconductor Wafer manufacturing

Ahmad, Md Fauzi
Critical Success Factors of Six Sigma Implementation in Malaysian Manufacturing Industry

The Relationship between Leadership Styles and Quality Management Practices in Malaysian Manufacturing Firms

Ahmad, Rosmaini
Diverse Possibility of Fit Manufacturing Principle Into Value Stream Mapping(VSM) and Its Impact: A Review

Productivity Assessment Based on Different Perspectives in Industries: A Review

Ahmed, Faran
Fuzzy Extent Analysis: Comparison of Defuzzification Methods

Ahmed, Jaleel
Investigation of Trade Credit Patterns in Effect with Bank Loan Availability

Ahmed, M. Mansoor
Effect of Heating on the Impedance of NiPc based Organic Field Effect Transistor

Ahmed, Rocksana
Rework Impact on BIW Production System Optimization Using Six Sigma Analysis

Ahmed, Shamsuddin
A review on photosynthetic bioenergy utilizing CO2 from plant flue gas: an approach on microalgae based third generation biofuels production

Aijazuddin, Muhammad
“Performance Evaluation”&”Problems Identifications in Warehouses” OF THIRD-PARTY Logistics

Aimdate, Kritsana
The Impact of Structure of Interdependence on Supplier Performance in the Local Pineapple Processing Supply Chain in Thailand: a Mixed Method Research

Aisha, Atya
Evaluating the Location of Effective Product Advertising on Facebook Ads

Ait Kadi , Daoud
A new risk-based dynamic approach for Prioritizing Surgical Patients’ access to healthcare services

Prioritization of patients with Communication Disorders

Ajayi, Oluseyi
Development of Facility Utilization Model for Use in Ajaokuta Steel Complex

Process Variability Analysis of License Vehicle Number Plate Production in Nigeria

Aji, Dimas
Evaluating the Location of Effective Product Advertising on Facebook Ads

Akbar, Usama
Effects of Value Stream Mapping in a Processing Industry

Akbari, Razieh
Developing a cost-effective model for evaluating the efficiency of weigh in motion system

Akhter, Salma
Conversion of Waste Plastics into Gasoline and Diesel

FIRE SAFETY AND AVAILABILITY OF FIRE FIGHTING EQUIPMENT IN SELECTED GARMENT FACTORIES IN BANGLADESH

Akram, Shahzain
Consideration of economics and ergonomics aspects in the design and manufacturing of Hydraulic Floor crane

Aksakal, Erdem
Green Supplier Selection under Risk Assessment

Aksakalli, Vural
Disambiguation Points Sampling Heuristic for the Stochastic Obstacle Scene Problem

Performance Evaluation of an Exact Method for the Obstacle Neutralization Problem

Al Amoudi, Abrar Saeed
Optimizing the Final Exam Scheduling Process at King Abdulaziz University

Al Hasani, Rashid
Designing Personalized Tourism Packages for Oman Tourism Industry

Al Kindi, mahmood
Decision Analysis View of Higher Education Planning Activities of Admission and Resources Allocation. in Oman

Al Maimani, Abdulwahab
Designing Personalized Tourism Packages for Oman Tourism Industry

Al Mamari, Amur
Designing Personalized Tourism Packages for Oman Tourism Industry

Al Sudani, Gazal
A Taguchi-Continuous Simulation Approach to the Injection Molding Blowing Process Quality Improvement

Al-Dairi, Jasim
Development of an Expert System for the Feasibility Assessment of Renewable Energy Projects

Al-Daoud, Zuhair
Optimization of Excess and Waste of Closed Loop Supply Chain System by Using Fuzzy Model

Al-Saleh, Mohammed
Modified Cluster Boundary Search Technique for Improved Layout Designs

Alam, Jahangir
Save water to save our next generation

Alam, Mohammad Tauhidul
A Model of a Secured Smart e-Health System

Alam Talikder, Mahmmad Mahbub
Burn Accident related Injuries and Disabilities among the RMG Women Workers: A Case Study of Tazreen Garments Trazedy

Alamanda, Dini Turipanam
Application System for Smart Supply Chain Management (SCM): Case Study of SMEs in Indonesia

Alauddin, Nurul Hanisah
INVESTIGATION OF PROPAGATION AND PERMEABILITY MODIFICATION OF GRAFTED BENTONITE PARTICLES IN POROUS MEDIA

Alavifar, Seyed Amirhossein
Analyzing the Success Rate of Strategic and Tactical Economic Sanctions; A strategy for Russian economic planning

Developing a Risk Based Maintenance; A Case study – Low Density Polyethylene (LDPE) production unit of Amir Kabir Petrochemical complex in Iran

Albarune, Abu Raihan Bhuiyan
Valued Supply Chain: The imminent Frontier For Improved Hospital Management

Aleideh, Basel
Statistical Analytical Study of Traffic Accidents and Violations in the State of Kuwait and its Social and Economic Impact on the Kuwaiti Society

ALGIN, Ramazan
Performance Evaluation of an Exact Method for the Obstacle Neutralization Problem

Alharbi, Khawlah
STUDENTS ATTENDANCE SYSTEM IN FACULTY OF ENGINEERING AT KING ABDULAZIZ UNIVERSITY

Alhashimi, Lamees
Optimizing the Final Exam Scheduling Process at King Abdulaziz University

Ali, Ahad
Manufacturing cell layout improvement using Simulation Modeling and Group Technology

Predicting Seasonal Demand with Bayesian Generalized Linear Model

Ali, Ashraf
A Prospective Solution for Consistent Aerostatic Lift for a Hybrid Buoyant Aircraft

Ali, Intizar
An investigation into the impact of advance manufacturing technologies implementation in SMEs manufacturing plastic packaging products- A case study of Pakistan

Ali, Md. Kawsar
Save water to save our next generation

Ali, Md. Liakot
A Model of a Secured Smart e-Health System

Development of a Computer Aided Learning Tool for PIC Microcontroller

Ali, Naqash
The Effect of Perceived Self-Efficacy and Product Comparisons on Outcome Expectancy of Portable Multi-Screens

Ali, Qasim
CUSTOMER ORDERS PRIORITIZATION USING TOPSIS IN MULTI BUSINESS CHANNEL ENVIRONMENT

Ali, Shahid
AHP-Based Conceptual Model for Selection of Key Elements for Safety Culture Using SMART Criteria

Ali, Shamir
“Performance Evaluation”&”Problems Identifications in Warehouses” OF THIRD-PARTY Logistics

Ali, Zulfiqar
Deployment of Virtualization Technology for Higher Engineering Education Data Communication Laboratory

Design, Connection, Configuration and Testing of a Mini Data Center for Higher Engineering Technology Institute Lab

Aliabadi, Ehsan
Developing a Risk Based Maintenance; A Case study – Low Density Polyethylene (LDPE) production unit of Amir Kabir Petrochemical complex in Iran

Aljawi, lujain
Optimizing the Final Exam Scheduling Process at King Abdulaziz University

ALKAHTANI, MOHAMMED
Human Error in Multitasking Environments

Alkaya, Ali Fuat
Disambiguation Points Sampling Heuristic for the Stochastic Obstacle Scene Problem

Performance Evaluation of an Exact Method for the Obstacle Neutralization Problem

ALLIA, Khedidja
Trends in engineering education: Programs’ content, implementation to meet current challenges.

Almaktoom, Abdulaziz T.
Reliability-based Robust Design Optimization of Dynamic Supply Chain Network

Almonayirie, Waleed
An Innovative Holistic Approach to Optimal Portfolio Management

alrashan, abdalla
Normative Gripping Strength data and its Distribution among Middle Eastern Teenage and Young Adults

Alshahrani, Saad
Hospital-Supplier Integration: an Assessment of the Driving Factors in the Context of the Saudi Arabian Healthcare System

Altarazi, Safwan
A Taguchi-Continuous Simulation Approach to the Injection Molding Blowing Process Quality Improvement

Althomali, Raed
Deployment of Virtualization Technology for Higher Engineering Education Data Communication Laboratory

Alzahrani, Mohammed
Expert System Model Structure for Feasibility Study Using Strategic Planning and Systems Engineering Principles

Amadi-Echendu, Joe
A bibliographic review of trends in design and management of electrical power transmission transformers

An empirical review of equipment replacement challenges in an electricity distribution network

Amaya, Rene
Assessing the effect of implementing a port community system platform in the response time of an international terminal: the case of a multi-cargo facility at the Colombian Caribbean coast

Quick methodology based in the SCOR model for supply chains reengineering of international trade

Ameri, Hakimeh
Knowledge extraction from TB patients- A hybrid model with clustering and decision tree

Amin, Mohamed
Component Rating Optimization Methodology for the Protection of Photovoltaic Solar Power System Components from Shading Effect

Amir, Muhammad
“Performance Evaluation”&”Problems Identifications in Warehouses” OF THIRD-PARTY Logistics

Amjad, Asim
Ergonomic design of workstation for a labeling task

Ergonomic Risk Factors for Workers in Garments Manufacturing – A Case Study from Pakistan

Ammara, Ume
The Effect of Perceived Self-Efficacy and Product Comparisons on Outcome Expectancy of Portable Multi-Screens

ANAND, AKSHAY
ANALYZING THE EFFECT OF LINE-CELL CONVERSION ON MANUFACTURING SYSTEMS

ANASS, CHERRAFI
Critical Success Factors of Implementing Green Lean Six Sigma

Production Management Model Integrating Green and Lean Six Sigma

Anderazak, HAMAMA
The environmental impact of inputs used in the vitiviniculturalsector in Algeria

Andika, Aditya
Supply Chain Risk Management in the Indonesian Flavor Industry: Case Study from a Multinational Flavor Company in Indonesia

Anggadwita, Grisna
Application System for Smart Supply Chain Management (SCM): Case Study of SMEs in Indonesia

Applying the Analytical Hierarchy Process to Determine Upstream Competitiveness for Wedding-Planning Industry

Anggawisnu, Bayuardi
Musculoskeletal Disorders Among Caregivers in Nursing Home

Angkasith, Vorapoch
Creating shared value: How to guide for the Royal Project area

Developing for Sustainable Lanna Cultural Tourism Area

Firm’s Policy Management by using ERP system

Animah, Isaac
Development of a condition index matrix to support technical feasibility of life extension in the offshore oil and gas industry

Anjani, Shabila
Designing Laptop Based On Costumer Preference Using ECQFD and TRIZ Methods

Anjomshoae, Ali
Effect of Information Sharing and Capacity Adjustment on Healthcare Service Supply Chain: The Case of Flood Disaster

Ansari, Muhammad Zulfiqar
Optimization of Loading Time of Pallets on Shifting Truck by Suggested Operating Procedure (SOP) at a Fast Moving Consumer Goods Producing Company.

Aoki, Katsuki
Proposed Lean Sustained Factors

Aouissi, Mokhtar
Impact of the geometrical parameters of labyrinth seal on the efficiency of gas pumping unit

Aqib, Muhammad
Effects of Value Stream Mapping in a Processing Industry

Areejit, Suwilai
Automatic Screening Unqualified Result in Emotional Quotient Test

Intelligent Risk Prediction Method for Risk Management Planning

Aremu, Olateju
Anthropometric Data Variation Within Gari-frying Population

Ariff, Tasnim Firdaus
Low Energy and Low Cost Freshwater Production by Membrane Distillation

Minimum Quantity Lubrication in Micromachining: A Greener Approach

Ariningsih, Paulina
Understanding the Impulsiveness Effect of a Web Design on Online Fashion Stores

Ariyanti, Fransisca Dini
Supply Chain Risk Management in the Indonesian Flavor Industry: Case Study from a Multinational Flavor Company in Indonesia

Arrighini, Giacomo
YOUR OPINION MATTERS: A CROSS-SECTIONAL STUDY ON HAPPINESS AMONG OLDER ADULTS IN SIBERIA

Arsalan, Muhammad
Globalization of Logistics and Supply Chain Management

Project Management: A Complete Paradigm for Pakistani Public and Private Educational Institutions

Arshad, Muhammad
Scheduling of Three FMS Layouts Using Four Scheduling Rules

Asawarungsaengkul, Krisada
An Analysis on Process Parameters of Solder Jet Bonding to Increase the Shear Strength of Solder Joint in HGA

An Artificial Bee Colony Algorithm for the Vehicle Routing Problem with Backhauls and Time Windows

An Improvement on Shear Test Equipment for HGA and GR&R Analysis in a Magnetic Head Operation

Asgari, Mehrnaz
Multi-server Congested Location Allocation Problem with Multiple Objectives

Ashaari, Hasbullah
Development of Comprehensive WIP Performance Monitoring Systems for Semiconductor Fabrication Foundry

Ashraf, Maria
Ergonomic Risk Factors for Workers in Garments Manufacturing – A Case Study from Pakistan

Asmelash, Zerihun
Challenges of wastewater discharge and techniques for treatment: a review

Asokan, Keerthika
A Survey Of Routing Protocols Of Wireless Sensor Network With Mobile Sinks

Asrar, Waqar
A Prospective Solution for Consistent Aerostatic Lift for a Hybrid Buoyant Aircraft

Asress, Tariku Achamyeleh
Aerodynamic Optimization of NACA64A410 Blade Aerofoil for Small Wind Turbine Application with Ansys Fluent

Astuti, Yuhana
Application System for Smart Supply Chain Management (SCM): Case Study of SMEs in Indonesia

Applying the Analytical Hierarchy Process to Determine Upstream Competitiveness for Wedding-Planning Industry

Attia, Ahmed
Improving the manufacturing performance by using the appropriate purchasing strategy

Austria, Eunice
Competitive Revenue Management Model Using Dynamic Pricing for Theater Seats Management

Avendano, Gerardo
Improvement of the manufacturing process of the salicylic acid

Awadalla, Medhat
Prediction of Oil Well Flowing Bottom-hole Pressure in Petroleum Fields

Awang, Ahmad Termizi
Solutions to ammoniacal nitrogen presence in CMP effluent from oxide process

Ayu, Ketut
Research on BRT Driver Jakarta Fatigue Evaluation

Aziz, Muhammad Haris
Application Of Concurrent Engineering For Collaborative Learning And New Product Design

CUSTOMER ORDERS PRIORITIZATION USING TOPSIS IN MULTI BUSINESS CHANNEL ENVIRONMENT

AZIZAN, AZLINNA
Performance Measurement System and Business Performance Measurement System: A Comparative Study

Azizmohammadi, Roozbeh
Using Tolerated Risk for Solving Hazardous Material Routing Problem by Preemptive Goal Programming Approach

B, Justus Rabi
Performance Analysis of Different Controller for PEMFC Fed Adjustable Speed Drives

B, Manoj
Industrial Data Communication- PLC and External Application

B K, GNANAVEL
Numerical Modelling and Optimization of Square Microneedle Array for Efficient Transdermal Drug Delivery

B. Md. Amin Hamzas, Mohd Fidzwan
Productivity Assessment Based on Different Perspectives in Industries: A Review

Backhouse, Christopher
Activating Organizational Learning Capabilities through Service Operations Design

Re-shoring Manufacturing through the application of Additive Technologies

Bacudio, Lindley
Application of Monte Carlo Analytic Hierarchical Process (MCAHP) in the Prioritization of Theme Park Service Quality Elements

Competitive Revenue Management Model Using Dynamic Pricing for Theater Seats Management

Bade, Jitendra
Design and Development of Drilling Jig for Spinning Rings used in Textile Industry

Bahar, Rubina
Low Energy and Low Cost Freshwater Production by Membrane Distillation

Minimum Quantity Lubrication in Micromachining: A Greener Approach

Baihaqi, Imam
Two-level Supply Chain with Extended Warranty in Competitive Market Environment

Bajkhaif, Batool
STUDENTS ATTENDANCE SYSTEM IN FACULTY OF ENGINEERING AT KING ABDULAZIZ UNIVERSITY

Bakar, Abu
“Performance Evaluation”&”Problems Identifications in Warehouses” OF THIRD-PARTY Logistics

BALAKRISHNAN, NIVEDHA
FABRICATION OF FRACTURE AID USING RAPID PROTOTYPING

Balares, Kevin Kristoffer
Effects of Different Interruptions While Driving for Field Independent and Dependent Individuals

BALKHAIR, SUNDUS
STUDENTS ATTENDANCE SYSTEM IN FACULTY OF ENGINEERING AT KING ABDULAZIZ UNIVERSITY

Banthia, Gaurav
Optimal Aggregate Production Planning by using Genetic Algorithm

banthia, gaurav
Rework Reduction in KHS machinery Pvt. Ltd.

Banzon, Mc Joren
Application of Monte Carlo Analytic Hierarchical Process (MCAHP) in the Prioritization of Theme Park Service Quality Elements

Bappy, Mohammad Jabed Perves
Low Energy and Low Cost Freshwater Production by Membrane Distillation

Barysheva, Galina
YOUR OPINION MATTERS: A CROSS-SECTIONAL STUDY ON HAPPINESS AMONG OLDER ADULTS IN SIBERIA

Baseer , Majid
Globalization of Logistics and Supply Chain Management

Project Management: A Complete Paradigm for Pakistani Public and Private Educational Institutions

Basu, Sumanta
An investigation into the urban bus route performance using a modified DEA Model: A case study of Kolkata bus transport

Reliable capacitated facility location problem: SAA based approach

BATRA, RUSHIL
Application of Fuzzy Logic and Fuzzy Systems in Machining: A Literature Review

Grey fuzzy optimization of cutting parameters on Material Removal Rate and Surface Roughness of Aluminium

BAYRAKTAR, Demet
Applying the Principles of Lean Management to the Radiology Department

Behrani, Paras
Association Between Psychosocial factors with upper-musculoskeletal disorders: An academic review

BELHADI, Amine
Road Map for the Implementation of Lean production tools in SMEs

Bellamine, Fethi
Sensitivity Analysis in Optimization of Multiple Cyclone Arrangements

Stochastic Dynamic Optimization of Engineering Processes

BEN CHEIKH, Souhir
Manufacturing configuration selection under arduous working conditions: A multi-criteria decision approach

BEN-AYED, Omar
Class-Time Utilization in Business Schools in Tunisia

Benarto, Clara
Literature review of Physical Delivery Service Quality : type of research and research gap

Beng Joo, Thung
Enabling CMOS 0.13µm technology at 0.18um equipment platform on 200mm Semiconductor Manufacturing Industry

Benhida, Khalid
Critical Success Factors of Implementing Green Lean Six Sigma

Production Management Model Integrating Green and Lean Six Sigma

BENMOUNAH, Amar
Alternative solution for the pipeline transport of viscous oil using the heaters in pumping stations.

BENYOUNES, Khaled
CHARACTERIZATION AND MODELING OF RHEOLOGICAL BEHAVIOR OF A SYSTEM OF MUD A REVERSE EMULSION

Bhardwaj, Prabhas
Assessing Customer Requirements and Preferences for a Perishable Product: A Case of an Indian Cooperative Dairy

Heterogeneous Vehicle Routing Problem in a Supply Chain

Optimization Model for Advertisement Decision A Case of Cooperative Dairy

Bhaskaran, Harinivas
Improving Indian Healthcare using Data Mining

Bhatti, Aamer Iqbal
Various Techniques to Design Controllers for Single Link Flexible Arm

Bhavashi, Dharmil
Rework Reduction in KHS machinery Pvt. Ltd.

Bhortake, Rupesh
: Enhancement of tube and tube Heat exchanger with semispherical hollow baffle for counter flow

BHUSHAN, CHAITANYA
ANALYZING THE EFFECT OF LINE-CELL CONVERSION ON MANUFACTURING SYSTEMS

Bin Abd Majid, Mohd Amin
Prediction Of Failures By Using Crow/AMSAA Model In Microsoft Excel

Bin Abd Manap, Nurulfajar
Enabling CMOS 0.13µm technology at 0.18um equipment platform on 200mm Semiconductor Manufacturing Industry

Bin Raja Ghazilla, Raja Ariffin
The effect of human learning with cognitive and motor capabilities on a fuzzy EOQ model

Binti Salehuddin, Fauziyah
Enabling CMOS 0.13µm technology at 0.18um equipment platform on 200mm Semiconductor Manufacturing Industry

Bisi, Arnab
An Efficiency and Consistency Based Approach for Selecting the Best Cricket Team

Coordinating a Multi-echelon Apparel Supply Chain in the Presence of Supply and Demand Uncertainty

Biswas, Indranil
An investigation into the urban bus route performance using a modified DEA Model: A case study of Kolkata bus transport

Biswas, M H A
Optimal Control Applied to Dynamic Model of Climate Change: A Bangladesh Scenario

Bogner, Eva
Enhanced Organizational Ambidexterity in Electronics Manufacturing through the Automation of Production-Related Processes

Bon, Abdul Talib
Applying Fuzzy Inference System Tsukamoto for Decision Making in Crude Palm Oil Production Planning

Assembly Line Optimization using Arena Simulation

Bondi, Alessandro
Supporting Decisions on Industrial Plant Modularization: A Case Study Approach in the Oil and Gas Sector

Bonilla Enriquez, Gladys
Model for Estimation of Interurban Passenger Transportation Scheme

Model of Logistics Management of the Supply Chain (LMSC) to Improve the Production Sector of Perishable Food Integrated by Small and Medium Enterprises in Mexico

On the Situation of Traditional Textile Producers in Mexico: General Overview for Supply Chain Improvements

Boon, Liew Kai
Relationship between Human Errors in Maintenance and Overall Equipment Effectiveness in Food Industries

Boonmee, Chawis
Application of MFCA and ECRS in Waste Reduction: A Case Study of Electronic Parts Factory

Boonsothonsatit, Kanda
Causal Linkage-based Strategic Map Design along the Robotics and Automation Supply Chain in Thailand

Industrial Logistic Performance Evaluation: A Case of Printing and Packaging Company in Thailand

Bosaletsi, Ouma
An empirical review of equipment replacement challenges in an electricity distribution network

bourareche, mouloud
Modi?ed Barrier and Operational Risk Analysis using Bayesian approach: Towards Bayesian–BORA methodology

Bourebia, Mounira
Effect of inclination of the walls mold on the primary cooling during the continuous casting

Study of surface quality – Effect of fractal dimension and texture parameters

Brandmeier, Markus
Ontology-Based User Guidance for Energy Efficiency Optimization Measures

bt Abdul Halim, Nur Fadhlina
Mean-Variance Portfolio Optimization on Some Stocks By Using Non Constant Mean and Volatility Models Approaches

Buabuthr, Suwaphit
Industrial Logistic Performance Evaluation: A Case of Printing and Packaging Company in Thailand

Bujwa, Muhummad
Temperature Distribution using Zone Models for Radiative Sections of Fired Process Heaters

Burcar Dunovic, Ivana
Megaproject case studies: a stakeholder management perspective

Burhani, Nurul Rawaida Ain
A Novel Multi-Objective and Multi-Criteria Decision Support System for Logistic Management during Flood Disaster

Application of Logistic Regression in Resolving Influential Risk Factors Subject to Corrosion Under Insulation

Bursheh, Anita
A Taguchi-Continuous Simulation Approach to the Injection Molding Blowing Process Quality Improvement

butuner, hakan
Applying the Principles of Lean Management to the Radiology Department

Systematic Competency Based Training Needs Analysis

Caballero-Morales, Santiago-Omar
Contour Approach for Analysis of Minimum Regions for the Economic Statistical Design of X-bar Control Charts

Model for Estimation of Interurban Passenger Transportation Scheme

On the Situation of Traditional Textile Producers in Mexico: General Overview for Supply Chain Improvements

Cagno, Enrico
Addressing Supply Chain Configuration Practices: Evidence from Italian Best Performer Valve Suppliers for the Oil & Gas Industry

Caldwell, Eldon
A new heuristic algorithm to solve product-service mix analysis in mobile bottleneck enviroments with shared resources based on GTBM method

Caliskan, Emre
Green Supplier Selection under Risk Assessment

Carvalho, Maria
Improving organizations performance through Supply Chain Quality Management practices

Casati, Fabio
YOUR OPINION MATTERS: A CROSS-SECTIONAL STUDY ON HAPPINESS AMONG OLDER ADULTS IN SIBERIA

Ceyhan, Elvan
Performance Evaluation of an Exact Method for the Obstacle Neutralization Problem

Chaijaruwanich, Anirut
Effect of Sintering Temperature on Hydroxyapatite Compact Scaffold Characteristics

Chaiwongbud, Thaneeya
Asssessment of Thai Check Point for Border Trade Operations

Chan, Caroline
Hospital-Supplier Integration: an Assessment of the Driving Factors in the Context of the Saudi Arabian Healthcare System

Chan, CHEE-MING
Engineering Postgraduate Students’ Perspective on Their Preparedness for the Job Market: Employability Attributes

Chan, Shiau Wei
Critical Success Factors of Six Sigma Implementation in Malaysian Manufacturing Industry

Implementation of Fuzzy Inference System For Production Planning Optimisation

The Relationship between Leadership Styles and Quality Management Practices in Malaysian Manufacturing Firms

Chandra, Deepak
VALUE CHAIN OPTIMIZATION IN OVERSEAS PROCUREMENT

VALUE CHAIN OPTIMIZATION IN OVERSEAS PROCUREMENT USING LPP

Chandrakumar, Chanjief
Fuzzy AHP based Multi-Criteria Decisions Support System for Eco-Design

Selecting the best layout for the container terminal using Modeling and Simulation Techniques

Chang, Elizabeth
In-house Crowdsourcing-based Entity Resolution using argumentation: Issue of Common Names

Next Generation of Interactive contact centre for efficient customer recognition

Chatterjee, Debdeep
Using Multiple Criteria Approach to Evaluate Risks associated with Supply Chain Sustainability

Chattinnawat, Wichai
Application of Material Flow Cost Accounting Analysis to Increase Pajama Production Efficiency: A Case Study of Confederate International Co., Ltd.

The Limitation of MFCA-based Cost Analysis for Serial Manufacturing Process with Sampling Scheme

Application of Material Flow Cost Accounting Analysis to Increase Pajama Production Efficiency: A Case Study of Con

Chaudhary, Kuldeep
A study on the Profitability Analysis of Power Grid Corporation of India Ltd

Optimal promotional policy for a new product in presence of firm’s goodwill in Segmented Market: A control theoretic Approach

CHE ANI, MOHD NORZAIMI
Solving Quality Issues in Automotive Component Manufacturing Environment by utilizing Six Sigma DMAIC Approach and Quality tools

Che Daud, Mohd Radzi
A Critical Assessment of Prevailing Models for Measuring Lean Manufacturing

Relationships of Lean, Green Manufacturing and Sustainable Performance: Assessing the Applicability of the Proposed Model

Che Ismail, Mokhtar
Application of Logistic Regression in Resolving Influential Risk Factors Subject to Corrosion Under Insulation

Chiba, Eishi
Performance evaluation of a heuristics for the prize collecting Steiner tree problem

Chien, Ying Che
Determination of Burn-in Period Based on Reliabality Target for Product Failure Time with Weibull Distribution

Chik, Mohd Azizi
SEMICONDUCTOR FABRICATION STRATEGY FOR CYCLE TIME AND CAPACITY OPTIMIZATION: PAST AND PRESENT

The Influence of Industrial Engineering in Semiconductor Fabrication Factory Optimization

CHINGONO, TATENDA TALENT
Creating shared value in South Africa. A case study of Rustenburg and Emahlahleni regions

Waste management for sustainable development in industrial parks. A case study of Wadeville industrial area, Johannesburg

Chitsaz, Ehsan
How Team Allocate the Resource; A Model of Escalation of Commitment in Competitive Situation

The Effect of Perceived Self-Efficacy and Product Comparisons on Outcome Expectancy of Portable Multi-Screens

The Psychology of the Competition in High-Tech Industries

Chiu, Maxwell
The history and development of six sigma quality management

Cho, Hyunha
Composition Methodology for Optimal Portfolio and Performance Measures Considering Indian SENSEX

Composition Methodology for Optimal Portfolio and Performance Measures Considering Indian SENSEX

Choi, Chel-Jong
Microstructural and Electrical properties of Screen-printed N+ Emitter of P-type Monocrystalline Silicon Solar cell

Chompu-inwai, Rungchat
Application of Lean Manufacturing Concepts to Reduce Manufacturing Lead Times within the Meatball Production Process

Choomrit, Ninlawan
A Study of Green Procurement Practices: A Case Study of the Computer Parts Industry in Thailand

Chutima, Parames
APPLICATION OF THE SIX-SIGMA CONCEPT TO TIME REDUCTION FOR RESIN RECIRCULATE RINSE IN DEMINERALIZED WATER PRODUCTION

IMPROVEMENT OF MASTER PRODUCTION PLANNING IN A SEMI-CONDUCTOR MANUFACTURER

Chuttur, Mohammad
Emotional Intelligence in COCOMO II for Software Cost Estmation

Coulibaly, Amadou
System of decision-making assistance for the recycling manufactured products.

Dabwan, Abdulmajeed
Determining the Effect of Key Process Parameters on Forming Force of Single Point Incremental Sheet Metal Forming

DABWAN, Abdulmajeed
Human Error in Multitasking Environments

DAOUD , Abdelnaser
Determining the Effect of Key Process Parameters on Forming Force of Single Point Incremental Sheet Metal Forming

Dapeng, Liang
How Team Allocate the Resource; A Model of Escalation of Commitment in Competitive Situation

The Psychology of the Competition in High-Tech Industries

DARISI VENKATA, MANIDHAR
An Integrated Multi-Echelon Stochastic Supply Chain Production-Distribution Model With Carbon Emissions

An Intelligent feature based process planning for Rotational parts

DARMOUL, Saber
Human Error in Multitasking Environments

Manufacturing configuration selection under arduous working conditions: A multi-criteria decision approach

Risk issues in facility layout design

Darom, Noraida Azura
Disruption recovery of two-stage serial supply chain with consideration of carbon emission cost

Integration of economic and environmental aspects in sustainable supply chain management: a review

Daus, Denis
A Build-or-Lease Case Study for a Potential New Warehouse Due To Increasing Storage Capacity Requirements

Davis, Boyd
Debottlenecking of Conventional Copper Smelters

Dechvichankit, Gulputt
Developing for Sustainable Lanna Cultural Tourism Area

Deeying , Jakawat
An Analysis on Process Parameters of Solder Jet Bonding to Increase the Shear Strength of Solder Joint in HGA

Dehghani, Mohammad Ali
Priority Determination of the Renewable Energies Using Fuzzy Group VIKOR Method; Case Study Iran

DEVADAS, SAANDILIAN
Remote Global Alignment Error for Pad Inductor Layer To Improve The Cycle Time

DEVARAJ, KANNAN
EFFICIENT AUTHENTICATION METHOD USING SCORE LEVEL FUSION AND PARTICLE SWARM OPTIMIZATION (PSO) OF MULTIMODAL BIOMETRICS

Transportation of Organs using UAV

Dharmawardhana, Mahanama
Decision support framework for the Sustainability of Traditional Brass Industry – A Sri Lankan case study

Dhini, Arian
Application of Text Mining for Classification of Textual Reports: A Study of Indonesia’s National Complaint Handling System

Multi-Attribute Control Chart Design for Bronze Pipe Fittings Production

Review on some Multivariate Statistical Process Control Methods for Process monitoring

Dhouib, Karem
Optimal Production-Inventory Control Policy for Manufacturing Systems Subject to Quality Deterioration

Din, Abdul Talib
Solutions to ammoniacal nitrogen presence in CMP effluent from oxide process

Dolatshahi, Amirali
A Risk Management Framework for Selling a Mega Power Plant Project in a New Market

Dressel, Fanny
Material Flow Cost Accounting in Supply Chains – Challenges and Approaches

Duffield, Colin F.
A balanced approach to project management in partnering types of contract: a public private partnerships framework

Duffuaa, Salih
AN EFFECTIVE ORGANIZATIONAL STRUCTURE TO IMPLEMENT STRATEGIC PLANS IN HIGHER EDUCATION INSTITUTIONS

Dzulkalnine, Natasha
COMPARATIVE STUDY OF PROCUREMENT SYSTEM BETWEEN INDUSTRIALISED BUILDING SYSTEM (IBS) AND CONVENTIONAL CONSTRUCTION

Eapen, Shaiju
Assessment of Business Processes in Consolidated Patient Account Centers

Edy, Martinus
Performance Measurement in PT. XYZ Using The Balanced Scorecard (a case study of PT. XYZ)

El fezazi, Said
Critical Success Factors of Implementing Green Lean Six Sigma

Road Map for the Implementation of Lean production tools in SMEs

El Hakea, Ayman
Component Rating Optimization Methodology for the Protection of Photovoltaic Solar Power System Components from Shading Effect

EL HEIT, Kaddour
CHARACTERIZATION AND MODELING OF RHEOLOGICAL BEHAVIOR OF A SYSTEM OF MUD A REVERSE EMULSION

The environmental impact of inputs used in the vitiviniculturalsector in Algeria

El Touby, Pakinam
Network Management and Bandwidth Resource Allocation in Educational Institutions

El-Kilany, Khaled
An Integrated Framework for Optimization of Resources in Emergency Departments

El-Zoghby, Julia
An Integrated Framework for Optimization of Resources in Emergency Departments

Elamrani , Fatima Zohra
Critical Success Factors of Implementing Green Lean Six Sigma

Production Management Model Integrating Green and Lean Six Sigma

ElKamel, Ali
A Review of Models for Optimal Bio-products Syntheses from Oil Palm Empty Fruit Bunch (EFB)

Optimization of a Battery Pack in Plug-In Hybrid Electric Vehicles

Sensitivity Analysis in Optimization of Multiple Cyclone Arrangements

Stochastic Dynamic Optimization of Engineering Processes

Superstructure Optimization of Multiple Gas-Solid Cyclone Arrangements

Temperature Distribution using Zone Models for Radiative Sections of Fired Process Heaters

Thermochemical Processing of Biomass: Graphic User Interface Models for Costing and Material Balances

ElSayed, Aziz E.
Development of a Business Process Model Notations (BMPN) for a Cloud Manufacturing Architecture

Network Management and Bandwidth Resource Allocation in Educational Institutions

Eltawil, Amr
A Discrete-Event and Agent-Based Hybrid Simulation Approach for Healthcare Systems Modeling and Analysis

An Integrated Model for Chemotherapy Planning

Ema, Kaoru
Analysis of VOC (Voice of Customer) Data for Assessing Corporate Image of a Housing Equipment Company

Emami, Hamed
ANALYTICAL STUDY OF PECKING ORDER THEORY OF CAPITAL STUCTURE;EVIDENCE FROM MALAYSIA

Erni, Nofi
Implementation of Knowledge Management at Woven Handycraft Industry (Case Study : DI Yogyakarta – Indonesia)

Estember, Rene
Effects of Different Interruptions While Driving for Field Independent and Dependent Individuals

Forecasting of Stock Prices Using Brownian Motion – Monte Carlo Simulation

Fadel, Omnia
Tolerance Analysis using An alternative to Monte Carlo simulation

Fahmy, Sherif
A Genetic Algorithm for Solving the Integrated Cell Formation, Layout and Scheduling Problem

Faias, Marta
A Game-Theoretic Approach to Digital Marketing and Lead Generation for Duopoly Markets

Failaka, Muhamad Fariz
Sensitivity Analysis in Optimization of Multiple Cyclone Arrangements

Stochastic Dynamic Optimization of Engineering Processes

Superstructure Optimization of Multiple Gas-Solid Cyclone Arrangements

Farhang Doost , Alireza
Value of Perfect Information in Condition Based Maintenance using Proportional Hazards Models; a comparison of maintenance strategies

Farhat, Nazma
Valued Supply Chain: The imminent Frontier For Improved Hospital Management

Farid, Touiti
Desalination of Seawater Research Project on the Basis of the Positive Results of Water Treatment by Magnetic Field

Farooquie, Jamal A
Reverse Logistics in Indian Pharmaceutical Industry

Farooquie, Parveen
Supply Chain Flexibility and Performance under Uncertainty in Indian Automotive Industry

Farouk, Ahmed
Reliability and Maintainability Parameters Estimation under Imperfect Repair and Maintenance by Genetic Algorithm

Farouk, Hala
An Integrated Framework for Optimization of Resources in Emergency Departments

Fathoni, Muhammad Israr
Android Maze Game for Children as an AutismTherapy

Fathy, Amr
Genetic Algorithms For Two-Phase Construction Dynamic Site Layout

Fatima, Noshin
Effect of Heating on the Impedance of NiPc based Organic Field Effect Transistor

Various Techniques to Design Controllers for Single Link Flexible Arm

Fatoni, Rois
A Review of Models for Optimal Bio-products Syntheses from Oil Palm Empty Fruit Bunch (EFB)

Optimization of a Battery Pack in Plug-In Hybrid Electric Vehicles

Superstructure Optimization of Multiple Gas-Solid Cyclone Arrangements

Temperature Distribution using Zone Models for Radiative Sections of Fired Process Heaters

Thermochemical Processing of Biomass: Graphic User Interface Models for Costing and Material Balances

Fedotova, Kristine
The Strategic Management Analysis of Wood Manufacturing Companies in Latvia – Interdisciplinary approach

Ferdows Nipa, Jannatul
Study on Performance Evaluation of Self-propelled Reaper

Fernandes, Ana Cristina
Improving organizations performance through Supply Chain Quality Management practices

Ferris, Timothy
Assessing Self-Responsibility in Employability Competencies Development among Australian Engineering Students: Introductory report

Feyissa, Tesfaye Tolu
Determinants of the Scope of Supply Chain E-Collaboration

Relating E-integrated, Triple-A Supply Chain to Environmental Uncertainty, Market Competition and Firm Performance

Relating Supply Chain E-Integration to Organizational Strategy

Feylizadeh, Mohammad Reza
Priority Determination of the Renewable Energies Using Fuzzy Group VIKOR Method; Case Study Iran

Fileinti, Nauli Dwi
Predicting The Development Time of Platform For Multiple-Generation Product Using Artificial Neural Network

Firmansyah, Mohammad Rizal
Intermediary agent in the holistic collaborative production distribution network model for SMMEs

The development of a framework for Australian SMMEs collaboration in a global supply chain environment, Part 1: A conceptual model and solution approach

The development of a framework for Australian SMMEs collaboration in a global supply chain environment, Part 2: Genetic operators and a case study

Firouzi Jahantigh, Farzad
A Hybrid Genetic Algorithm for Solving Facility Location-Allocation Problem

Firouzi Jahantigh, Farzad
Knowledge extraction from TB patients- A hybrid model with clustering and decision tree

Firouzi Jahantigh, Farzad
Quantitative Optimization of Nurses in Emergency Department of Teaching Hospital: A case study

Fowler, Michael
Optimization of a Battery Pack in Plug-In Hybrid Electric Vehicles

Franco, Thomas
Improving Indian Healthcare using Data Mining

Franke, Joerg
Enhanced Organizational Ambidexterity in Electronics Manufacturing through the Automation of Production-Related Processes

Ontology-Based User Guidance for Energy Efficiency Optimization Measures

Frolova, Elena
YOUR OPINION MATTERS: A CROSS-SECTIONAL STUDY ON HAPPINESS AMONG OLDER ADULTS IN SIBERIA

Fujiwara, Masaki
Importance of the Strategic Utilization of Information Technology in Small and Medium-Sized Food Manufacturers in Japan

Gadallah, Mohamed
Tolerance Analysis using An alternative to Monte Carlo simulation

Galih, Indi
Designing Laptop Based On Costumer Preference Using ECQFD and TRIZ Methods

Gandhi, Yash
Model Predictive Control for Automobiles

Quater Car Analysis Using Simulink

GANGAL, CHAITANYA
ANALYZING THE EFFECT OF LINE-CELL CONVERSION ON MANUFACTURING SYSTEMS

Ganguly, Anirban
Using Multiple Criteria Approach to Evaluate Risks associated with Supply Chain Sustainability

Ganjouhaghighi, Negar
A Risk Management Framework for Selling a Mega Power Plant Project in a New Market

Gao, Yi-Feng
Optimal Pricing Strategy for Multi-generations Durable Products with a Trade-in Program

Garcia, Guisselle
Assessing the effect of implementing a port community system platform in the response time of an international terminal: the case of a multi-cargo facility at the Colombian Caribbean coast

Gardoni, Mickael
System of decision-making assistance for the recycling manufactured products.

Gashgari, Raneem
Optimizing the Final Exam Scheduling Process at King Abdulaziz University

Geipele, Ineta
Energy Efficiency Improvement Opportunities in Latvia as a Sustainable Development Indicator

Energy sector process control system to ensure achievement of energy efficiency targets in Latvia: a case study

Importance of Business Incubators for New Business and its Development in Latvia

Influence of Economic and Real Estate Market Fluctuations on Real Estate Entrepreneurship in Latvia

Real Estate Investment Management and Macroeconomic Sustainability: Case of Latvia and International Experience

Geipele, Sanda
Energy sector process control system to ensure achievement of energy efficiency targets in Latvia: a case study

Management of energy efficient processes in residential and public buildings at regional level: a Case Study of Latvia

Geipele, Sanda
The Strategic Management Analysis of Wood Manufacturing Companies in Latvia – Interdisciplinary approach

Ghani, Mohd Khairolden Ghani
Performance Management Criteria in Malaysian Healthcare

Ghasemi, Alireza
Value of Perfect Information in Condition Based Maintenance using Proportional Hazards Models; a comparison of maintenance strategies

Ghazy, Mootaz
Development of a Business Process Model Notations (BMPN) for a Cloud Manufacturing Architecture

Reliability and Maintainability Parameters Estimation under Imperfect Repair and Maintenance by Genetic Algorithm

Ghosh, Partha Sarathi
Reliable capacitated facility location problem: SAA based approach

Gobaco, Bryan
Prepositioning of relief goods under network uncertainty for tropical cyclones with information updates: a humanitarian supply chain

Godilano, Ezrha
Improvement of Productivity Rate of JIT #262, Creams, Liquids, Lotions Department of a Cosmetics Company

Goh, Shao Hung
A Price Review Framework for Maintenance, Repair and Operations Procurement Contracts in the Public Sector

Commercial Viability of Foldable Ocean Containers

Gonzalez Rubio, Jose Luis
Visual data mining of faults in machining process based on machine learning

Goto, Hiroyuki
An Analytical Framework for Local Impacts of Road Pricing Policy: A Case Study of the Tokyo Metropolitan Area

Categorization of Web News Documents Using Word2Vec and Deep Learning

Performance evaluation of a heuristics for the prize collecting Steiner tree problem

Resolution of Resource Contentions in the Critical Chain Project Management based on Simulated Annealing

Götze, Uwe
Framework of an ‘(In)Efficiency Costing’ based on the idea of Material Flow Cost Accounting

Material Flow Cost Accounting in Supply Chains – Challenges and Approaches

GOVINDASAMY, GOPU
FABRICATION OF FRACTURE AID USING RAPID PROTOTYPING

Grilo, Antonio
A Game-Theoretic Approach to Digital Marketing and Lead Generation for Duopoly Markets

Grover, Richa
Impact of 5S Implementation

Rework Reduction in KHS machinery Pvt. Ltd.

Gumasing, Ma. Janice
Effects of Different Interruptions While Driving for Field Independent and Dependent Individuals

Gunawan, Ivan
Performance Measurement in PT. XYZ Using The Balanced Scorecard (a case study of PT. XYZ)

Guoxin, Li
The Effect of Perceived Self-Efficacy and Product Comparisons on Outcome Expectancy of Portable Multi-Screens

Gupta, Gaurav
An Efficiency and Consistency Based Approach for Selecting the Best Cricket Team

Gupta, Juhi
Optimal Aggregate Production Planning by using Genetic Algorithm

Gupta, Juhi
Rework Reduction in KHS machinery Pvt. Ltd.

Gupta, Mohit
A study on the Profitability Analysis of Power Grid Corporation of India Ltd

gupta, shikha
Towards Risk Managed Cloud Adoption A Conceptual Framework

Gupta, Surbhi
A study on the Profitability Analysis of Power Grid Corporation of India Ltd

Gwee, Wan Theng
Diverse Possibility of Fit Manufacturing Principle Into Value Stream Mapping(VSM) and Its Impact: A Review

Hadi, Ismanurrahman
OPTIMIZATION OF THE ACID CATALYST CONCENTRATION FOR SYNTHESIS OF ANTI-CANCER AGENT GAMAVUTON-0 BY USING MATHEMATICAL AND STATISTICAL SOFTWARE

Hadining, Aulia
Evaluating the Location of Effective Product Advertising on Facebook Ads

Hadj, Mimoun
Measurement and Prediction of Condensate Gas Hydrates Formation Conditions – A Study Case

Hafezinia, Mojhgan
Waiting time duration-constrained Close-Open Mixed Vehicle Routing Problem with Semi Soft Time Window solved by Genetic algorithm and Tabu Search

Hagos, Rezene Kahsay
Implementation of computerized Preventive Maintenance In Sur construction PLC

Haidar, Alhamidi
Android Maze Game for Children as an AutismTherapy

Hain, Karl
Fostering creativity and innovation in engineering design education: A case study

Haji Sabran, Ahmad Soyuti
Knowledge Management (KM) in Human Error (HE) in Accident Prevention

Hajizadeh, Mehrdad
Placement of Solar-Wind Hybrid Power Plant in iran with using AHP algorithm and technical and economic evaluations by HOMER software

HAJRI-GABOUJ, Sonia
Manufacturing configuration selection under arduous working conditions: A multi-criteria decision approach

Risk issues in facility layout design

Hakim, Inaki Maulida
Motion and Time Study : Measurement of Workstation For Piston Assembly Line Considering Anthropometric For Indonesian People

Hamadache, Hamid
Study of surface quality – Effect of fractal dimension and texture parameters

Hamid, Zuhairi Abd Hamid
Performance Management Criteria in Malaysian Healthcare

Han, Yuchan
Composition Methodology for Optimal Portfolio and Performance Measures Considering Indian SENSEX

Composition Methodology for Optimal Portfolio and Performance Measures Considering Indian SENSEX

Hanif, Farhan
Various Techniques to Design Controllers for Single Link Flexible Arm

Hanif, Muhammad
Optimal Control Applied to Dynamic Model of Climate Change: A Bangladesh Scenario

Haque, Md. Mohidul
Optimal Control Applied to Dynamic Model of Climate Change: A Bangladesh Scenario

Hardaya, I. B. N. Sanditya
Multi-Attribute Control Chart Design for Bronze Pipe Fittings Production

Hardaya, I.B.N. Sanditya
Application of Text Mining for Classification of Textual Reports: A Study of Indonesia’s National Complaint Handling System

Harding, J.A.
Product-Service System and Inventory Control: Provision in a UK manufacturing case study

Harimurti, Sabtanti
OPTIMIZATION OF THE ACID CATALYST CONCENTRATION FOR SYNTHESIS OF ANTI-CANCER AGENT GAMAVUTON-0 BY USING MATHEMATICAL AND STATISTICAL SOFTWARE

Harisuddin, Muhammad
MODEL AND SIMULATION DESIGN OF STACKING RULES IN CONTAINER TERMINAL WITH DISCRETE EVENT SIMULATION APPROACH

Haron, Habibah
The Level of Safety Culture Beliefs and Practices Amongst Safety and Health Officers (SHOs) in Malaysian Manufacturing Companies

Haroun, Ahmed Elamin
AN EFFECTIVE ORGANIZATIONAL STRUCTURE TO IMPLEMENT STRATEGIC PLANS IN HIGHER EDUCATION INSTITUTIONS

Hasachoo, Narat
Schedule Nervousness in Production Operations of an Airline Catering Company: The Challenge of an Effective Demand Response Program

Hasan, Maruf
The history and development of six sigma quality management

Hasan Miraz, Mahadi
Supply chain management in service Quality

Hasbullah, Endang Soeryana
Mean-Variance Portfolio Optimization on Some Stocks By Using Non Constant Mean and Volatility Models Approaches

Hashemipour, Majid
A Dynamic Multi Agent based scheduling for flexible flow line manufacturing system: UPVC door and window Company

HASHIM, NURUL AYU
Remote Global Alignment Error for Pad Inductor Layer To Improve The Cycle Time

Hashim, Uda
SEMICONDUCTOR FABRICATION STRATEGY FOR CYCLE TIME AND CAPACITY OPTIMIZATION: PAST AND PRESENT

Hashim, Zarifah Syazana
Copper Sheet Resistance characteristics in the production staging time limitation study between Copper Seed and Copper Electroplating in Semiconductor Wafer manufacturing

Haskins, Cecilia
Availability Allocation Using Systems Engineering Principles

Hasni Abdullah, Roslan Bin
Applications De Bruijn Graphs of Hamiltonian and Eulerian Cycles to Fault Tolerant Networks

Hassan, Mohd Fahrul
ProSET: A Decision Support System for Sustainability Performance Evaluation

Hassan, Syed Muhammad
Consideration of economics and ergonomics aspects in the design and manufacturing of Hydraulic Floor crane

Hassanin , Ahmed
Modified Cluster Boundary Search Technique for Improved Layout Designs

Hassanpour, Hamed
Investigation of surface integrity in high speed machining of Ti6Al4V alloy

Hassnien, Amr
Reliability and Maintainability Parameters Estimation under Imperfect Repair and Maintenance by Genetic Algorithm

Hatipoglu, Gozde
Applying the Principles of Lean Management to the Radiology Department

Hayashi, Takaki
Analysis of VOC (Voice of Customer) Data for Assessing Corporate Image of a Housing Equipment Company

Development of Effective Marketing Strategies for a Housing Equipment Company Based on Analysis of Sales Data and Sales Personnel

Structural Analysis of Page Access Behaviors of Sessions at Website of a Housing Equipment Company

He, Xin James
Big Data Business Analytics: Attitude and Readiness

Heidari, Ali Asghar
Let a CPSO+ algorithm explore your high-quality shortest paths: an effective chaos-enhanced PSO-based strategy

Helmi, Syed Ahmad
Agile Supplier Selection: A Fuzzy Analytic Hierarchy Process (FAHP) Approach

Helmi, Syed Ahmad
Lean Supplier Selection: A Data Envelopment Analysis (DEA) Approach

Hemdi, Abdul Rahman
Measuring Product Sustainability Using Fuzzy Method

Heshmat, Mahmoud
An Integrated Model for Chemotherapy Planning

Hidayatno, Akhmad
Literature review of Physical Delivery Service Quality : type of research and research gap

Hishamuddin, Hawa
Disruption recovery of two-stage serial supply chain with consideration of carbon emission cost

Integration of economic and environmental aspects in sustainable supply chain management: a review

Hisjam, Mohammad
Agile Supplier Selection: A Fuzzy Analytic Hierarchy Process (FAHP) Approach

Lean Supplier Selection: A Data Envelopment Analysis (DEA) Approach

HO, Hwi-Chie
CAR DRIVERS WITH HIGHER PERCEIVED SAFETY TEND TO DRIVE THEIR VEHICLES WITH HIGHER RISK, A UNIQUE PHENOMENON ON THE ROADS IN JAKARTA, INDONESIA

Hocine, Abderrezak
Search an electric prevention by controlling the resistive component of the isolation of an ungrounded low voltage electrical network

Hopf, Hendrik
FSMER – Systematic Approach for Modeling Energy and Resource Efficient Factories

Hosokawa, Yuki
Performance evaluation of a heuristics for the prize collecting Steiner tree problem

Howard, Ian
An Investigation Into Bearing Fault Diagnostics for Condition Based Maintenance Using Band – Pass Filtering and Wavelet Decomposition Analysis of Vibration Signals

Huang, Ching-Jen
A case study of production scheduling and shop floor control for hybrid flexible flowshop

Applying fuzzy-AHP and VIKOR method to evaluate the fitness of ERP systems

Huang, Hsin-Wei
Reliability Analysis of a Motor Control Unit Used in Electric Vehicles

Hussain, Hadia
An Investigation of Lean Manufacturing Implementation in Textile Sector of Pakistan

Hussain, M.I
Diverse Possibility of Fit Manufacturing Principle Into Value Stream Mapping(VSM) and Its Impact: A Review

Productivity Assessment Based on Different Perspectives in Industries: A Review

Hussain, Salman
Application Of Concurrent Engineering For Collaborative Learning And New Product Design

Hussain, Tanweer
An investigation into the impact of advance manufacturing technologies implementation in SMEs manufacturing plastic packaging products- A case study of Pakistan

Hussin, Burairah
Relationship between Human Errors in Maintenance and Overall Equipment Effectiveness in Food Industries

I. Al-Mosawi, Ali
Effect of Wire Cutting Process on the Variables of Surface Roughness

Ibrahim, Ihfasuziella Ibrahim
Performance Management Criteria in Malaysian Healthcare

Ibrahim, Kader
Enabling CMOS 0.13µm technology at 0.18um equipment platform on 200mm Semiconductor Manufacturing Industry

Idoye, Emeka
Understanding Risk Perception Related to Trust and Bias in Cyberspace

Iizuka, Shinji
An Improved Analogy-based Demand Forecasting Method for Service Parts

ikome, john
A relationship framework and Critical application in between strategy and operational plans for manufacturing industry

An Analysis of competitive Advantages of South African Manufacturing industries. A case study; Automotive Industries.

Ikome, Martha
A relationship framework and Critical application in between strategy and operational plans for manufacturing industry

Inaba, Tatsuya
Networked RFID based Supply Chain Process Analysis

Iqbal, Mohammad
FIRE SAFETY AND AVAILABILITY OF FIRE FIGHTING EQUIPMENT IN SELECTED GARMENT FACTORIES IN BANGLADESH

Iridiastadi, Hardianto
Fatigue from driving – a comparison between morning and afternoon tasks

Musculoskeletal Disorders Among Caregivers in Nursing Home

Research on BRT Driver Jakarta Fatigue Evaluation

Ishak , Dendi
Qualtiy Improvement in Plastic Based Toy Manufacturer Using Six Sigma Method

Ishola, Felix
Process Variability Analysis of License Vehicle Number Plate Production in Nigeria

Islam, Ishat
Applying 5S Method on Trims Store’s Documentation System in an Apparel Industry

Ismail, Md Yusof
A Critical Assessment of Prevailing Models for Measuring Lean Manufacturing

Relationships of Lean, Green Manufacturing and Sustainable Performance: Assessing the Applicability of the Proposed Model

Ismail, Mohamed
EmployingTechnology To Customize The Flipped Classroom Practice

Ismail, Siti
Product-Service System and Inventory Control: Provision in a UK manufacturing case study

ismaila, olasunkanmi
Anthropometric Data Variation Within Gari-frying Population

Ito, Teruaki
Hidden Wastes in Overall Equipment Effectiveness (OEE) under the study of Maynard’s Operation Sequence Technique (MOST)

Ivanova, Svetlana
Income inequality and human capital as factors influencing economic development of region – case study of Latvia

Income inequality and human capital as factors influencing economic development of region – case study of Latvia

Increasing the competitiveness of the city with energy efficiency measures possibilities for Latvian cities

Increasing the competitiveness of the city with energy efficiency measures – possibilities for Latvian cities

J.S Ali, Mohamed
A Prospective Solution for Consistent Aerostatic Lift for a Hybrid Buoyant Aircraft

Jaaron, Ayham
Activating Organizational Learning Capabilities through Service Operations Design

Impact of Change Orders In Construction Sector In The West Bank

Jabbarzadeh, Armin
A Multi Objective Robust Model for Capacity-Constraint Hub-Covering Flow Problem

JAFERI, FATEMEH
Selecting The Contractor using Multi Criteria Decision Making Case Study : National Gas Company of Lorestan province of Iran

Jamaluddin, Haris
The Challenge in Malaysian Industries in Implementing Design of Experiment

Jamil, Ifra
IMPACT OF PERSONALITY TRAITS OF MANAGER ON THE PERFORMANCE OF PROJECT

Jandhana, IB Putra
Literature review of Industrial Competitiveness Index : research gap

Janjua, Naeem
In-house Crowdsourcing-based Entity Resolution using argumentation: Issue of Common Names

jayabalan, Neeta
HR Practices and organizational commitment among SME employees which leads to retention

Jayamaha, Nihal
The Impact of ICT Usage on Collaborative Product Development Performance: A Conceptual Model and Industry Perspective

Jayawickrama, Malan
An AHP Based Methodology to Evaluate Social Life Cycle of an Apparel Manufacturing Plant

Decision support framework for the Sustainability of Traditional Brass Industry – A Sri Lankan case study

Jeyanthinathasarma, Gowrynathan
DESIGN AND DEVELOPMENT OF GREEN LABEL POINT RATING SYSTEM TO PROMOTE SCP CONCEPTS

Selecting the best layout for the container terminal using Modeling and Simulation Techniques

Ji, Myeonghun
Using Mathematical Programming for Investment Assessment and Optimal Investment

Using Mathematical Programming for Investment Assessment and Optimal Investment

Jientrakul, Ranon
Multiple Performance Optimization forHuman-Robot Collaboration: a Translation Motion in a Tele-Sandblasting Maintenance System

Jigar, Abraham Almaw
Availability Allocation Using Systems Engineering Principles

Johar, Muhammad Akmal
Comparative Performance Study of Smart Structure for Thermal Microactuators

Johari, Mohamed Fitri
Estimation of compensation cost related to Musculoskeletal Disorder: Younger versus Older Malaysian Manufacturing Workers

Judrupa, Ilze
Introducing of smart work – opportunity to increase economical development of municipalities in Latvia

Introducing of smart work – opportunity to increase economical development of municipalities in Latvia

Jufar, Shiferaw Regassa
Numerical Study of Non-Premixed Combustion of Pulsed Swirling Co-axial Jets

Jumani, Muhammad
An investigation into the impact of advance manufacturing technologies implementation in SMEs manufacturing plastic packaging products- A case study of Pakistan

K, Hemachandran
Performance Analysis of Different Controller for PEMFC Fed Adjustable Speed Drives

K KULKARNI, PAVAN KUMAR
An Integrated Multi-Echelon Stochastic Supply Chain Production-Distribution Model With Carbon Emissions

Kabadi, Vinay V
Optimized Measures to Improve TAT in Product Maintenance

Kadiresan, Vimala
HR Practices and organizational commitment among SME employees which leads to retention

Kaestle, Christopher
Enhanced Organizational Ambidexterity in Electronics Manufacturing through the Automation of Production-Related Processes

Kahloul, Laid
Using several intelligences for complex industrial process monitoring :detection and diagnosis

Kahsay, Mulu Bayray
Aerodynamic Optimization of NACA64A410 Blade Aerofoil for Small Wind Turbine Application with Ansys Fluent

Kakarla, Manoj
A Social Network Based Optimisation Approach on Patient Admission Scheduling Problem

Kalia, Arvind
Investigating Software Detection Methods

Kalluri, Vinayak
Evaluation of Innovative Product Development Practices in an Organization: A Case Study

Kamaruddin, Nor Kamariah
Workplace Ergonomics and Employees’ Health: A Case Study at Automotive Manufacturer

Kamaruzzaman, Syahrul Nizam Kamaruzzaman
Performance Management Criteria in Malaysian Healthcare

KAMEL, BADDARI
Facies Analysis and Permeability/porosity Prediction from well log data using the Non Parametric Regression with Multivariate Analysis and Neural Network in the Reservoirs of the Hassi R’Mel Southern Field (Algeria)

Kammoun, Raoudha
Class-Time Utilization in Business Schools in Tunisia

Kamola, Liga
Income inequality and human capital as factors influencing economic development of region – case study of Latvia

Income inequality and human capital as factors influencing economic development of region – case study of Latvia

Increasing the competitiveness of the city with energy efficiency measures possibilities for Latvian cities

Increasing the competitiveness of the city with energy efficiency measures – possibilities for Latvian cities

Kamols, Uldis
Income inequality and human capital as factors influencing economic development of region – case study of Latvia

Income inequality and human capital as factors influencing economic development of region – case study of Latvia

Increasing the competitiveness of the city with energy efficiency measures possibilities for Latvian cities

Increasing the competitiveness of the city with energy efficiency measures – possibilities for Latvian cities

The Significance of Riga Neighbourhoods for the Sustainable Economic Development of the City

KAN, TING-HAO
Reliability Analysis of a Motor Control Unit Used in Electric Vehicles

Kanakana Katumba, Mukondeleli Grace
An Analysis of competitive Advantages of South African Manufacturing industries. A case study; Automotive Industries.

An empirical study of competitiveness measurement methododology: A case study of the automotive manufacturing sector

Assessment of Automotive Industry Component Supplier’s Competitiveness in South Africa

The impact of Process Improvement initiatives in manufacturing industry in South Africa

Kang, Po-Chih
Applying fuzzy-AHP and VIKOR method to evaluate the fitness of ERP systems

Kantanantha, Nantachai
A Hybrid Particle Swarm Optimization Algorithm and Support Vector Machine Model for Agricultural Statistic of Thailand Forecasting

Karadsheh, Zina
A Taguchi-Continuous Simulation Approach to the Injection Molding Blowing Process Quality Improvement

Karia, Noorliza
Enterprise Resource Planning (ERP) Systems in the Egyptian Higher Education Institutions: Benefits, Challenges and Issues

Transforming green logistics practice into benefits: a case of 3PLs

karim, A.N.M.
A Critical Assessment of Prevailing Models for Measuring Lean Manufacturing

Relationships of Lean, Green Manufacturing and Sustainable Performance: Assessing the Applicability of the Proposed Model

Karimov, Khasan
Effect of Heating on the Impedance of NiPc based Organic Field Effect Transistor

Karmakar, Sandipan
A Bayesian LASSO Algorithm for Simultaneous Variation Fault Diagnosis in Ill Conditioned Multistage Manufacturing Processes

Karunarathna, Shanaka
Decision support framework for the Sustainability of Traditional Brass Industry – A Sri Lankan case study

KASBI, SLAMET
Design of Single-Phase Grid-Connected Based on Dual-MPPT for Photovoltaic Generation Systems

Kasemset, Chompoonoot
Application of MFCA and ECRS in Waste Reduction: A Case Study of Electronic Parts Factory

Katiyar, Himanshu
On the Energy detection of unknown signals over fading channel for different diversity combining techniques

Katiyar, Jitendra
Facility and Process Layout Analysis of an SME using Simulation: A Case Study of a Manufacturing Company

Kato, Ryoma
Categorization of Web News Documents Using Word2Vec and Deep Learning

Kauškale, Linda
Energy Efficiency Improvement Opportunities in Latvia as a Sustainable Development Indicator

Importance of Business Incubators for New Business and its Development in Latvia

Influence of Economic and Real Estate Market Fluctuations on Real Estate Entrepreneurship in Latvia

Real Estate Investment Management and Macroeconomic Sustainability: Case of Latvia and International Experience

The Strategic Management Analysis of Wood Manufacturing Companies in Latvia – Interdisciplinary approach

Kayvanfar, Vahid
Resource Management For Workflows In Cloud Computing Environment Based On Group Technology Approach

Kazar, Okba
Using several intelligences for complex industrial process monitoring :detection and diagnosis

Kazemi, Nima
Analyzing optimization techniques in inventory models: the case of fuzzy economic order quantity problems

The effect of human learning with cognitive and motor capabilities on a fuzzy EOQ model

KEE-LUEN, WONG
In search of Malaysian companies with successful implementation of business intelligence initiatives

Khadeer Hussain, Omar
In-house Crowdsourcing-based Entity Resolution using argumentation: Issue of Common Names

Next Generation of Interactive contact centre for efficient customer recognition

Khadem, Mohammad
Occupational Health and Safety issues affecting worker performance in Omani industries (SME’s)

Khaleghi, Sahar
Autonomic Learning Algorithm to Predict Stock Price at the Exchange via Metaheuristics-Based Optimization

Khalifa, GAYE
System of decision-making assistance for the recycling manufactured products.

Khalili, Amjad
A Critical Assessment of Prevailing Models for Measuring Lean Manufacturing

Relationships of Lean, Green Manufacturing and Sustainable Performance: Assessing the Applicability of the Proposed Model

Khaliqdina, Jamil
An investigation into the impact of advance manufacturing technologies implementation in SMEs manufacturing plastic packaging products- A case study of Pakistan

Khan, M. Khurshid
Development of an Expert System for the Feasibility Assessment of Renewable Energy Projects

Scheduling of Three FMS Layouts Using Four Scheduling Rules

Khan, Moin
“Performance Evaluation”&”Problems Identifications in Warehouses” OF THIRD-PARTY Logistics

Khan, Muhammad Ibrahim
Consideration of economics and ergonomics aspects in the design and manufacturing of Hydraulic Floor crane

Khan, Saifullah
CUSTOMER ORDERS PRIORITIZATION USING TOPSIS IN MULTI BUSINESS CHANNEL ENVIRONMENT

Khan, Shahid Kalim
How Team Allocate the Resource; A Model of Escalation of Commitment in Competitive Situation

The Effect of Perceived Self-Efficacy and Product Comparisons on Outcome Expectancy of Portable Multi-Screens

Khanzode, Vivek
Design and assessment of lean handling buffers in forward-reserve model

Khatter, Kiran
Investigating Software Detection Methods

Khoshsoroor, Somayeh
How Team Allocate the Resource; A Model of Escalation of Commitment in Competitive Situation

The Psychology of the Competition in High-Tech Industries

Khot, Mukesh
: Enhancement of tube and tube Heat exchanger with semispherical hollow baffle for counter flow

Khusairi, Nor’Azah
Development of Comprehensive WIP Performance Monitoring Systems for Semiconductor Fabrication Foundry

Kiatcharoenpol, Tossapol
A Study of Green Procurement Practices: A Case Study of the Computer Parts Industry in Thailand

Kidane, Teklehaimanot Tadele
Factors Affecting Consumers’ purchasing Decision through E-Commerce

Influence of culture on E-commerce and vice versa

Relating Supply Chain Risks to Supply Chain Strategy

Kilic, Kemal
Fuzzy Extent Analysis: Comparison of Defuzzification Methods

Kim, Dain
Crime Trend Analysis by Changes of Spatial Autocorrelation and Hot-spot

Crime Trend Analysis by Changes of Spatial Autocorrelation and Hot-spot

Kim, Minsung
Selection of Optimal Portfolio Model by Comparing Mock Stock Trading

Selection of Optimal Portfolio Model by Comparing Mock Stock Trading

Kim, Taeheon
Selection of Optimal Portfolio Model by Comparing Mock Stock Trading

Selection of Optimal Portfolio Model by Comparing Mock Stock Trading

KIMURA, Asako
How will MFCA make Usefulness on Sustainable Engineering? : Based on practical experiences in Japanese and Southwestern Asian companies

Kissani, Ilham
Improvement of the Production Process via Kaizen: Case Study of a Wiring Company

Kitada, Hirotsugu
Management Control Systems for Material Flow Cost Accounting: A Case of Japanese Company

Kitamura, Yutaro
An estimation of land price by kriging using geographic information system

Kitaoka, Masatoshi
Debugging Operation of Automated Assembly Lne using Signal Noise Ratio

Kittipongpittaya, Ketinun
Application of Material Flow Cost Accounting and System Dynamics Approach for Waste Reduction and Sustainable Food Manufacturing Development in Thailand

Kobayashi, Fuminori
Design of Single-Phase Grid-Connected Based on Dual-MPPT for Photovoltaic Generation Systems

Kodali, Venkat Anirudh
A Social Network Based Optimisation Approach on Patient Admission Scheduling Problem

KOK HONG, LENG
Remote Global Alignment Error for Pad Inductor Layer To Improve The Cycle Time

Kokubu, Katsuhiko
Impact of Introducing Material Flow Cost Accounting: A Comparative Review of Supply Chains and Individual Companies

Komatsu, Mikio
Structural Analysis of Page Access Behaviors of Sessions at Website of a Housing Equipment Company

Kopey, Volodimir
Impact of the geometrical parameters of labyrinth seal on the efficiency of gas pumping unit

Koriki, Miyuki
Importance of the Strategic Utilization of Information Technology in Small and Medium-Sized Food Manufacturers in Japan

Kosanan, Onuma
A Hybrid Particle Swarm Optimization Algorithm and Support Vector Machine Model for Agricultural Statistic of Thailand Forecasting

Kouki Amri, Sana
Risk issues in facility layout design

Kouta, Hanan
Tolerance Analysis using An alternative to Monte Carlo simulation

Koval, Oksana
Czech Students’ Perception of Careers in the Shared Services Industry

Krishnan, Krishna
Reliability-based Robust Design Optimization of Dynamic Supply Chain Network

Krones, Manuela
Identification of Energy Efficiency Measures during Factory Planning Processes

Kuan, Seng How
Debottlenecking of Conventional Copper Smelters

Kulatunga, Asela
An AHP Based Methodology to Evaluate Social Life Cycle of an Apparel Manufacturing Plant

Decision support framework for the Sustainability of Traditional Brass Industry – A Sri Lankan case study

DESIGN AND DEVELOPMENT OF GREEN LABEL POINT RATING SYSTEM TO PROMOTE SCP CONCEPTS

Fuzzy AHP based Multi-Criteria Decisions Support System for Eco-Design

Perception of female employees towards the Lean and work culture change in apparel industry in Sri Lanka

Selecting the best layout for the container terminal using Modeling and Simulation Techniques

Kulkarni, Makarand
A Methodology for Simultaneously Optimizing Selective Maintenance Decision and X-Control Chart Parameters

Cost Based Failure Consequence Approach for Identifying Critical Components for Maintenance Support Decision

Kumar, Nishant
Improving Indian Healthcare using Data Mining

kumar, Vimal
Exploring Critical Success Factors for TQM Implementation Using Interpretive Structural Modelling Approach: Extract from Case Studies

Facility and Process Layout Analysis of an SME using Simulation: A Case Study of a Manufacturing Company

Relating Left/Right Brained Dominance Types of Leaders to TQM Focus: A Preliminary Study

Kurniati, Nani
Two-level Supply Chain with Extended Warranty in Competitive Market Environment

Kurniawati, Kharisma Panca
Design of Human Cognitive Model in A Self-Optimizing Assembly Cell: A Case Study of Indonesian

Kusrini, Elisa
Designing performance measurement procedure for supply chain actors and regulator base on a modified model of Balanced scorecard and Data Envelopment Analysis

Laguardia, Ma. Erika
Assessment on 5S System of Rules in a Cosmetics Manufacturing’s Central Weighing Area, Processing and Packaging Area for Creams, Liquids and Lotions (CLL)

Lahmar, Hedia
Class-Time Utilization in Business Schools in Tunisia

Lakshminarayanamurthy, Sadhanand
Improving Indian Healthcare using Data Mining

Lakzadeh, AMIN
Feasibility of Implementation of Project Management System in Project Oriented Organizations–A Case Study of Electrical Distribution Company

Lamontagne, Marie-Ève
Prioritization of patients with Communication Disorders

Laosiritaworn, Wimalin
Ceramics Process Improvement with Material Flow Cost Accounting

Laouar, Lakhder
Effect of inclination of the walls mold on the primary cooling during the continuous casting

Study of surface quality – Effect of fractal dimension and texture parameters

Larik, Javed
An investigation into the impact of advance manufacturing technologies implementation in SMEs manufacturing plastic packaging products- A case study of Pakistan

Laseinde, Opeyeolu Timothy
An empirical study of competitiveness measurement methododology: A case study of the automotive manufacturing sector

Assessment of Automotive Industry Component Supplier’s Competitiveness in South Africa

Laswad, Ahmed
Development of a Business Process Model Notations (BMPN) for a Cloud Manufacturing Architecture

Lazarus, Daudi
Assessing Self-Responsibility in Employability Competencies Development among Australian Engineering Students: Introductory report

Lee, C.C
Diverse Possibility of Fit Manufacturing Principle Into Value Stream Mapping(VSM) and Its Impact: A Review

Lee, Hohyun
Composition Methodology for Optimal Portfolio and Performance Measures Considering Indian SENSEX

Composition Methodology for Optimal Portfolio and Performance Measures Considering Indian SENSEX

Crime Trend Analysis by Changes of Spatial Autocorrelation and Hot-spot

Selection of Optimal Portfolio Model by Comparing Mock Stock Trading

Using Mathematical Programming for Investment Assessment and Optimal Investment

Lee, Jinwoo
Using Mathematical Programming for Investment Assessment and Optimal Investment

Using Mathematical Programming for Investment Assessment and Optimal Investment

Lee, Youngjoo
Selection of Optimal Portfolio Model by Comparing Mock Stock Trading

Selection of Optimal Portfolio Model by Comparing Mock Stock Trading

Lemma, Tamiru Alemu
Exergy Based Multi-State Reliability Model for a Stationary Gas Turbine

Gas Turbine Prognostics using Fuzzy Systems and Modified Bat Algorithm

Liao, Li-Man
A case study of production scheduling and shop floor control for hybrid flexible flowshop

Applying fuzzy-AHP and VIKOR method to evaluate the fitness of ERP systems

Lim, Hazel Lynne
An Optimization Model for Managing System Inventories in a Disaster Supply Chain

Lin, Guan-Heng
A case study of production scheduling and shop floor control for hybrid flexible flowshop

Lin, Jyhjong
Enhancing Enterprise Performance with Social BPM and TOGAF Framework

Lizardo, Rose Angel
Competitive Revenue Management Model Using Dynamic Pricing for Theater Seats Management

Lo, Hui-Chiung
Optimal Pricing Strategy for Multi-generations Durable Products with a Trade-in Program

Lopez, Andrea
A Sequential Truck Transportation Waste Reduction Scheme

LUGUTERAH, ALBERT
Yield Stability and Genotype by Environment Interaction of Fifteen Rice (Oryza Sativa L) Genotypes Evaluated under Rainfed and Irrigated Conditions in Northern Ghana

Lundteigen , Mary Ann
Availability Allocation Using Systems Engineering Principles

M, RAMKUMAR
Selection of Green suppliers based on GSCM practices: Using fuzzy MCDM approach in an Indian Electronics Company

Macapuno, Michelle Joy
Determination of Burn-in Period Based on Reliabality Target for Product Failure Time with Weibull Distribution

Madanhire, Ignatio
A Cleaner Production (CP) Perspective for the Metal Industry Processes: Case Study

Cleaner Production to Optimize Resource Consumption and Reduce Effluent Waste in a Beverage Plant

From Traditional to Modern Manufacturing System: Case Study

Statistical Process Control (SPC) Application in a Manufacturing Firm to Improve Cost Effectiveness: Case study

Madkour, Amr
Near Optimal Solution for Green Vehicle Routing Problem

Mafutsana, Jacob, Mafutsana, Jacob
A bibliographic review of trends in design and management of electrical power transmission transformers

Maganini, Angelica
Supporting Decisions on Industrial Plant Modularization: A Case Study Approach in the Oil and Gas Sector

MAGESH, VIVEK SUNDAR
Improving Indian Healthcare using Data Mining

Maximizing revenues in the “Tatkal” Category of Indian Railways

Modelling Approaches for a Sustainable Supply Chain

Mahamud, Nur Syafilla
Hidden Wastes in Overall Equipment Effectiveness (OEE) under the study of Maynard’s Operation Sequence Technique (MOST)

Mahmood, Salwa
Measuring Product Sustainability Using Fuzzy Method

Mahmoud, Mohamed
Network Management and Bandwidth Resource Allocation in Educational Institutions

Mahmoudabadi, Abbas
Developing a cost-effective model for evaluating the efficiency of weigh in motion system

Using Tolerated Risk for Solving Hazardous Material Routing Problem by Preemptive Goal Programming Approach

MAIDIN, SHAJAHAN
Remote Global Alignment Error for Pad Inductor Layer To Improve The Cycle Time

Maiti, Jhareswar
A Bayesian LASSO Algorithm for Simultaneous Variation Fault Diagnosis in Ill Conditioned Multistage Manufacturing Processes

Majumdar, Adrija
An Efficiency and Consistency Based Approach for Selecting the Best Cricket Team

Mali, Satishkumar
: Enhancement of tube and tube Heat exchanger with semispherical hollow baffle for counter flow

Malmir, Behnam
A Hybrid Genetic Algorithm for Solving Facility Location-Allocation Problem

Mamat, Sulong
Solutions to ammoniacal nitrogen presence in CMP effluent from oxide process

Mancini, Mauro
Megaproject case studies: a stakeholder management perspective

Supporting Decisions on Industrial Plant Modularization: A Case Study Approach in the Oil and Gas Sector

Mandiartha, Putu
A balanced approach to project management in partnering types of contract: a public private partnerships framework

Maneefun, Waralak
IMPROVEMENT OF MASTER PRODUCTION PLANNING IN A SEMI-CONDUCTOR MANUFACTURER

Manikam, Arumugam
Yield Improvement Of Wafer Edge Die Defocus (EDD) at Via Layer

Manisri, Tharinee
A Practical Case Study of a Heterogeneous Fleet Vehicle Routing Problem with Various Constraints

Mansori , Shaheen Mansori
HR Practices and organizational commitment among SME employees which leads to retention

MANUPATI, VIJAYAKUMAR
A Social Network Based Optimisation Approach on Patient Admission Scheduling Problem

An Intelligent feature based process planning for Rotational parts

ANALYZING THE EFFECT OF LINE-CELL CONVERSION ON MANUFACTURING SYSTEMS

Selection of Green suppliers based on GSCM practices: Using fuzzy MCDM approach in an Indian Electronics Company

SOCIAL NETWORK ANALYSIS BASED EVOLUTIONARY ALGORITHIMIC APPROACH TO IDENTIFY THE INFLUENCE OF HUBS ON FLEXIBLE SCHEDULING PROBLEMS

Manzi, Filippo S.P.M.
Addressing Supply Chain Configuration Practices: Evidence from Italian Best Performer Valve Suppliers for the Oil & Gas Industry

Mapfaira, Herbert
Sustainable Product Innovation for Customer Experience: A Conceptual Framework

Maraña, Michael John
Forecasting of Stock Prices Using Brownian Motion – Monte Carlo Simulation

Maroo, Parul
Need for Deployment of RFID Technology in Indian Hospital

Maroo, Parul
Need for Deployment of RFID Technology in Indian Hospitals

Need for Deployment of RFID Technology in Indian Hospitals

Rework Reduction in KHS machinery Pvt. Ltd.

Strengthening Life Line

Mashhadi Alizadeh, Koorosh
Building Information Modeling (BIM): A Study to Prioritize Applications, Risks and Challenges

Resource Management For Workflows In Cloud Computing Environment Based On Group Technology Approach

Masike, Rujeko
Design of a Crushing and Propagation Screw Mechanism for Progressive Pelletising in Food Waste

Masmali, Majed
Geometric Chip Analysis of Helical End Milling Based on a Variable Flow Stress Machining Theory

MASOOD, SYED
A Way Forward to Attain Lean Manufacturing Status through Transformational Leadership

Massaeli, Ali
Developing Productivity Monitoring System in a governmental organization with multi-performance objectives: A case study in National Iranian Gas Company

Mastaneh, Zahra
Quantitative Optimization of Nurses in Emergency Department of Teaching Hospital: A case study

Masuchun, Ruedee
Schedule Nervousness in Production Operations of an Airline Catering Company: The Challenge of an Effective Demand Response Program

Mat Saman, Muhamad Zameri
Measuring Product Sustainability Using Fuzzy Method

ProSET: A Decision Support System for Sustainability Performance Evaluation

Mathavan, Senthan
Fuzzy AHP based Multi-Criteria Decisions Support System for Eco-Design

Mathew, Manoj
Optimization of a Battery Pack in Plug-In Hybrid Electric Vehicles

Mathew, Philip
Geometric Chip Analysis of Helical End Milling Based on a Variable Flow Stress Machining Theory

Mathrani, Sanjay
The Impact of ICT Usage on Collaborative Product Development Performance: A Conceptual Model and Industry Perspective

Mazhar, Muhammad Ilyas
An Investigation Into Bearing Fault Diagnostics for Condition Based Maintenance Using Band – Pass Filtering and Wavelet Decomposition Analysis of Vibration Signals

Mbohwa, Charles
A Cleaner Production (CP) Perspective for the Metal Industry Processes: Case Study

Application of Work Study for Productivity Improvement: A Case study of a Brewing Company

Cleaner Production to Optimize Resource Consumption and Reduce Effluent Waste in a Beverage Plant

Creating shared value in South Africa. A case study of Rustenburg and Emahlahleni regions

Developing KPIs for organizations with similar objectives

Dynamic capabilities and their direct impact on firm’s Performance

Evaluating Maintenance Strategies Effectiveness on Overall Equipment Utilization

From Traditional to Modern Manufacturing System: Case Study

Statistical Process Control (SPC) Application in a Manufacturing Firm to Improve Cost Effectiveness: Case study

Sustainable Product Innovation for Customer Experience: A Conceptual Framework

The Delphi technique: A credible research methodology

The Impact of Lack in Occupational Health and Safety Implementation in Small Businesses

The Impact of Maintenance Systems on Water Supply: A case Study of a Utility Company

The Impact of Quality Management Tools in Municipal Water Distributors: Case of Namibia

The Impact on the Operational Performance of Manufacturing Implementation Strategies

The Implementation of Team development Process in Cooperative Enterprises

Waste management for sustainable development in industrial parks. A case study of Wadeville industrial area, Johannesburg

Md Akhir, Nur Asyraf
INVESTIGATION OF PROPAGATION AND PERMEABILITY MODIFICATION OF GRAFTED BENTONITE PARTICLES IN POROUS MEDIA

Md Deros, Baba
The Challenge in Malaysian Industries in Implementing Design of Experiment

MD ITHNAN, MOHD IZUDDIN
Aircraft Ground Movement Delay: A Descriptive Statistical Analysis at Kuala Lumpur International Airport

Md Sirat, Rozlina
Estimation of compensation cost related to Musculoskeletal Disorder: Younger versus Older Malaysian Manufacturing Workers

The Level of Safety Culture Beliefs and Practices Amongst Safety and Health Officers (SHOs) in Malaysian Manufacturing Companies

Md Tap , Masine
Heat transfer through fire fighter’s protective clothing exposed to thermal radiation.

Md Zein, Raemy
Estimation of compensation cost related to Musculoskeletal Disorder: Younger versus Older Malaysian Manufacturing Workers

Megawati, Chyntia
Application of Text Mining for Classification of Textual Reports: A Study of Indonesia’s National Complaint Handling System

Mehrolhasani , Mohammad Hosein
Quantitative Optimization of Nurses in Emergency Department of Teaching Hospital: A case study

Mendoza Cortes, Valeria
INVENTORY, A TOOL TO IMPROVE HOSPITAL MANAGEMENT

Logistic tools for increased the level of opportunity in the intervention in patients with hip fracture at “Hospital Universitario Mayor Mederi” case.

Mesgarian, Reza
Use of Low Heating Value Natural Gas by Blending With Fuel Gas

Micheli, Guido Jacopo Luca
Addressing Supply Chain Configuration Practices: Evidence from Italian Best Performer Valve Suppliers for the Oil & Gas Industry

Supporting Decisions on Industrial Plant Modularization: A Case Study Approach in the Oil and Gas Sector

Miguel, Lahoz
Prepositioning of relief goods under network uncertainty for tropical cyclones with information updates: a humanitarian supply chain

Milana, Milana
Scheduling of Three FMS Layouts Using Four Scheduling Rules

MIN-HOOI, CHUAH
In search of Malaysian companies with successful implementation of business intelligence initiatives

Mir, Mustahsan
Modified Cluster Boundary Search Technique for Improved Layout Designs

Mirza, Jahanzaib
CUSTOMER ORDERS PRIORITIZATION USING TOPSIS IN MULTI BUSINESS CHANNEL ENVIRONMENT

Mishra, Rekha
Business Intelligence and Analytics: Paving way for Operational Excellence in Indian Banks

Mishra, Vinaytosh
Capacity Planning For Diabetes Management -Indian Example

Assessing Customer Requirements and Preferences for a Perishable Product: A Case of an Indian Cooperative Dairy

Miyazaki, Junko
Importance of the Strategic Utilization of Information Technology in Small and Medium-Sized Food Manufacturers in Japan

Moeis, Armand Omar
MODEL AND SIMULATION DESIGN OF STACKING RULES IN CONTAINER TERMINAL WITH DISCRETE EVENT SIMULATION APPROACH

Moeis, Armand Omar
The dynamics of Indonesian rice supply chain

Mohamed, Ali
Normative Gripping Strength data and its Distribution among Middle Eastern Teenage and Young Adults

Mohamed Shaharoun, Awaluddin
The Level of Safety Culture Beliefs and Practices Amongst Safety and Health Officers (SHOs) in Malaysian Manufacturing Companies

Mohammad, Musli
A REVIEW ON OPERATION DIAGNOSIS AND IDENTIFICATION OF OPERATION IMPROVEMENT

Awareness, Implementation, Effectiveness and Future Adoption of Operational Improvement Initiatives: Survey Results

The Effects of Lean Production Tools and Techniques Implementation at Malaysian Manufacturing and Service Industries: A Case Study Review

Mohammadi, Maryam
Two Calibrated Metaheuristic Algorithms for Solving a Multi-Plant Capacitated Lot-Sizing Problem in an Integrated Production-Distribution Network

Mohammed, Reiam
Optimization of Excess and Waste of Closed Loop Supply Chain System by Using Fuzzy Model

Mohammed, Thabit Sultan
Remote-Controlled Microcontroller-Based Temperature System : An Economical Design

Mohan, Nishith
Assessing Customer Requirements and Preferences for a Perishable Product: A Case of an Indian Cooperative Dairy

Optimization Model for Advertisement Decision A Case of Cooperative Dairy

MOHANTY, BISWAJITA
An Integrated Multi-Echelon Stochastic Supply Chain Production-Distribution Model With Carbon Emissions

Mohd Darudin, Mohamad Zambri
Development of Comprehensive WIP Performance Monitoring Systems for Semiconductor Fabrication Foundry

Mohd Darudin, Mohamad Zambri
Implementation in-situ auto polishing rate optimization for chemical mechanical planarization process in semiconductor fabrication industry

Mohd Yusof, Sha’ri
Design Simulation and Information Dashboard for Manufacturing Control Using Systematic Approach: a Case Study of Hospital Beds Production

Mohd Yusof, Sha’ri
Measuring Production Floor Performance Using Systematic Approach : a Case Study of Hospital Beds Production

Mohd Yusof, Sha’ri
Proposed Lean Sustained Factors

Mohd Yusuff, Rosnah
Ergonomics As a Lean Manufacturing Tool for Improvements in a Manufacturing Company

Mohd Zainal, Affandi
Estimation of compensation cost related to Musculoskeletal Disorder: Younger versus Older Malaysian Manufacturing Workers

Mokhlis, Ahmed
Critical Success Factors of Implementing Green Lean Six Sigma

Production Management Model Integrating Green and Lean Six Sigma

Mokhtar, Ainul Akmar
A Novel Multi-Objective and Multi-Criteria Decision Support System for Logistic Management during Flood Disaster

Application of Logistic Regression in Resolving Influential Risk Factors Subject to Corrosion Under Insulation

Mokhtar, Ainul Akmar
Comparative Analysis of Offshore Pipeline Reliability Using Degradation Analysis and PF Interval Models

Mokhtar, BOURDIM
Reduction of chatter vibrations by management of the cutting tool

Mokhtari, Majda
Investigation of structural and physical properties of Al1-xMnx thin films grown by magnetron sputtering: influence of thermal annealing

Mollik, Sazib
Crystallization kinetics and thermal behaviors of nanoclay dispersed jute reinforced composite

Moradlou, Hamid
Re-shoring Manufacturing through the application of Additive Technologies

Morawaka, Iresha
An AHP Based Methodology to Evaluate Social Life Cycle of an Apparel Manufacturing Plant

Mori, Masahito
Structural Analysis of Page Access Behaviors of Sessions at Website of a Housing Equipment Company

Moros, Adriana
Assessing the effect of implementing a port community system platform in the response time of an international terminal: the case of a multi-cargo facility at the Colombian Caribbean coast

Morssi, Maha
Sustainable Suppliers’ Selection in Ready-Made Garments:Toward Sustainable Manufacturing

Mota, Diogo
A Game-Theoretic Approach to Digital Marketing and Lead Generation for Duopoly Markets

Motebele, makhala mpho
Dynamic capabilities and their direct impact on firm’s Performance

Identifying Organisational best practices redesign: skills, grading and wage systems for synthesizing findings on WCM.

The Impact on the Operational Performance of Manufacturing Implementation Strategies

Mouseli, Ali
Quantitative Optimization of Nurses in Emergency Department of Teaching Hospital: A case study

Mouss, Hayet
Development of an internet-based fuzzy control system of manufacturing plant

Using several intelligences for complex industrial process monitoring :detection and diagnosis

Mpanza, Zanele
Identifying the root causes contributing to defects in order to minimize scrap

Mubin, Ahmad
Development of Sustainable Performance Measurement System for Electronic and Plastics Industrial Cluster Based Industrial Symbiosis Scenario in the Industrial Estate

Mucciardi, Frank
Debottlenecking of Conventional Copper Smelters

muda, zurina
Android Maze Game for Children as an AutismTherapy

Muhamad, Mohd Razali
Copper Sheet Resistance characteristics in the production staging time limitation study between Copper Seed and Copper Electroplating in Semiconductor Wafer manufacturing

The Influence of Industrial Engineering in Semiconductor Fabrication Factory Optimization

Muhammad, Masdi
A Comparative Study of ANFIS and ANNs Models for Performance-Based Condition Monitoring of Industrial Gas Turbines

A Novel Multi-Objective and Multi-Criteria Decision Support System for Logistic Management during Flood Disaster

Application of Logistic Regression in Resolving Influential Risk Factors Subject to Corrosion Under Insulation

Prediction Of Failures By Using Crow/AMSAA Model In Microsoft Excel

MUHAMMAD MALLICK, SUMAYEL
FIRE SAFETY AND AVAILABILITY OF FIRE FIGHTING EQUIPMENT IN SELECTED GARMENT FACTORIES IN BANGLADESH

Müller, Egon
FSMER – Systematic Approach for Modeling Energy and Resource Efficient Factories

Identification of Energy Efficiency Measures during Factory Planning Processes

Mulyana, Ig Jaka
Performance Measurement in PT. XYZ Using The Balanced Scorecard (a case study of PT. XYZ)

Munakata, Satoshi
An Improved Analogy-based Demand Forecasting Method for Service Parts

PSI-Cockpit: A Supply-Demand Planning System Focusing on Achieving Goals through Resolving KPI Conflicts

Mungwattana, Anan
A Practical Case Study of a Heterogeneous Fleet Vehicle Routing Problem with Various Constraints

Murugesan, Rajmohan
Application of Material Flow Cost Accounting and System Dynamics Approach for Waste Reduction and Sustainable Food Manufacturing Development in Thailand

musa, Haslinda
Analyzing the Adoption of Malaysian Standards (MS) on SME Performances: The Mediating Effects of Innovation Adoption Factors

Musa, S. Nurmaya
Two Calibrated Metaheuristic Algorithms for Solving a Multi-Plant Capacitated Lot-Sizing Problem in an Integrated Production-Distribution Network

Musa, Zairul Nisham Musa
Performance Management Criteria in Malaysian Healthcare

Mushtaq, Fareeha
Ergonomic Risk Factors for Workers in Garments Manufacturing – A Case Study from Pakistan

MUSTAPHA, NOR MAHIRAH
Performance Measurement System and Business Performance Measurement System: A Comparative Study

Mutingi, Michael
Fuzzy heuristic approaches for healthcare staff scheduling

Fuzzy Multi-Criteria Simulated Evolution for Nurse Re-rostering

Sustainable Product Innovation for Customer Experience: A Conceptual Framework

The Impact of Quality Management Tools in Municipal Water Distributors: Case of Namibia

Mwanza, Bupe
Application of Work Study for Productivity Improvement: A Case study of a Brewing Company

Evaluating Maintenance Strategies Effectiveness on Overall Equipment Utilization

The Impact of Maintenance Systems on Water Supply: A case Study of a Utility Company

Nabareseh, Stephen
Czech Students’ Perception of Careers in the Shared Services Industry

NACHIAPPAN, RAJA RAJESWARI
Numerical Modelling and Optimization of Square Microneedle Array for Efficient Transdermal Drug Delivery

Nainggolan, Marihot
Understanding the Impulsiveness Effect of a Web Design on Online Fashion Stores

Nait Said, Rachid
Modi?ed Barrier and Operational Risk Analysis using Bayesian approach: Towards Bayesian–BORA methodology

NAKAJIMA, Michiyasu
How will MFCA make Usefulness on Sustainable Engineering? : Based on practical experiences in Japanese and Southwestern Asian companies

Nakata, Yuya
Development of Effective Marketing Strategies for a Housing Equipment Company Based on Analysis of Sales Data and Sales Personnel

Nakkiew, Wasawat
Application of Material Flow Cost Accounting (MFCA) and Quality Control Tools in Wooden Toys Product

NANDA, SAHIL
Application of Fuzzy Logic and Fuzzy Systems in Machining: A Literature Review

Grey fuzzy optimization of cutting parameters on Material Removal Rate and Surface Roughness of Aluminium

Navarra, Alessandro
Debottlenecking of Conventional Copper Smelters

Navarro, Bryan
Evaluations of Crossover and Mutation Probability of Genetic Algorithm in an Optimal Facility Layout Problem

Navarro, Maricar
Evaluations of Crossover and Mutation Probability of Genetic Algorithm in an Optimal Facility Layout Problem

Ndiaye, Malick
Capacitated Lot-Sizing and Scheduling with Sequence-Dependent setups in Petrochemical Plants

Nedeltcheva, Galia Novakova
Rework Impact on BIW Production System Optimization Using Six Sigma Analysis

Negash, Berihun Mamo
Conceptual Framework for Using System Identification in Reservoir Production Forecasting

History matching of the PUNQ-S3 reservoir model using proxy modeling and multi-objective optimizations

Nel, Hannelie
The Design of QTrac: an automated Quality and Cost Management System for Projects

Ng, Artie
Second-movers’ advantage of utilizing Big Data to enhance sustainability performance: the case of elevator industry

Ng, Mykhael Clarenz
Prepositioning of relief goods under network uncertainty for tropical cyclones with information updates: a humanitarian supply chain

Ngadiman, Yunos
Implementation of Fuzzy Inference System For Production Planning Optimisation

Relationship between Human Errors in Maintenance and Overall Equipment Effectiveness in Food Industries

The Development of 5s-Kaizen And Service Excellence Measurement Framework for Malaysia Private Hospitals

Niizeki, Ryota
Applying Human Centered Design Process to Hitachi’s Integrated Plant Construction System

Nishiyama, Kakunoshin
Development of Effective Marketing Strategies for a Housing Equipment Company Based on Analysis of Sales Data and Sales Personnel

Novak, Galia
An Innovative Holistic Approach to Optimal Portfolio Management

Noval, Bagus
Two-level Supply Chain with Extended Warranty in Competitive Market Environment

Nurcahyo, Rahmat
Feasibility Analysis of Indonesian Traditional Shipping Industry to Strengthen Domestic Maritime Logistic System

Production Efficiency Improvement Through Preventive Maintenance and Production Scheduling Optimization

Qualtiy Improvement in Plastic Based Toy Manufacturer Using Six Sigma Method

Nusyirwan, Istas Fahrurrazi
Aircraft Ground Movement Delay: A Descriptive Statistical Analysis at Kuala Lumpur International Airport

Nwanya, Stephen
Development of Facility Utilization Model for Use in Ajaokuta Steel Complex

Process Variability Analysis of License Vehicle Number Plate Production in Nigeria

Obaid, Raed
Optimizing the Final Exam Scheduling Process at King Abdulaziz University

Ogbeifun, Edoghogho
Developing KPIs for organizations with similar objectives

The Delphi technique: A credible research methodology

Okada, Hisako
Applying Human Centered Design Process to Hitachi’s Integrated Plant Construction System

Okada, Kana
Impact of Introducing Material Flow Cost Accounting: A Comparative Review of Supply Chains and Individual Companies

Okada, Masahiro
Analysis of VOC (Voice of Customer) Data for Assessing Corporate Image of a Housing Equipment Company

Development of Effective Marketing Strategies for a Housing Equipment Company Based on Analysis of Sales Data and Sales Personnel

Structural Analysis of Page Access Behaviors of Sessions at Website of a Housing Equipment Company

Olanrewaju, Oludolapo
Model development to monitor and control energy consumption in South Africa

OLANREWAJU ADETUNLA, ADEDOTUN
Developing manufacturing execution software as a service for small and medium size enterprise

Olatunji, Obafemi
Development of Facility Utilization Model for Use in Ajaokuta Steel Complex

oliveira, carlos
The importance of learning computer programming for engineers

Olivos, Cano
Model of Logistics Management of the Supply Chain (LMSC) to Improve the Production Sector of Perishable Food Integrated by Small and Medium Enterprises in Mexico

Olugu, Ezutah Udoncy
Analyzing optimization techniques in inventory models: the case of fuzzy economic order quantity problems

The effect of human learning with cognitive and motor capabilities on a fuzzy EOQ model

Omar, Badrul
The Effects of Lean Production Tools and Techniques Implementation at Malaysian Manufacturing and Service Industries: A Case Study Review

Ong, Johann
Eliminating Salicide Residues in Wafer Fabrication Front-End Pre-Metal Layer Cleaning Process

Ong, Steven
An Optimization Model for Managing System Inventories in a Disaster Supply Chain

Ongchuan, Martin Julian
An Optimization Model for Managing System Inventories in a Disaster Supply Chain

onu, Livinus
Anthropometric Data Variation Within Gari-frying Population

Otero, Carlos
Quick methodology based in the SCOR model for supply chains reengineering of international trade

Othman, Mohammad
Impact of Change Orders In Construction Sector In The West Bank

Otieno, Wilkistar
Warranty Optimization for Remanufactured Products

OUAZRAOUI, NOUARA
An alternative approach to criticality analysis of industrial risks

Modi?ed Barrier and Operational Risk Analysis using Bayesian approach: Towards Bayesian–BORA methodology

Using fuzzy set theory for determining the toxicity thresholds of product Case study: Food processing industry

Oz, Dindar
Performance Evaluation of an Exact Method for the Obstacle Neutralization Problem

P, MALLIGA
Numerical Modelling and Optimization of Square Microneedle Array for Efficient Transdermal Drug Delivery

P, Onkar
Facility and Process Layout Analysis of an SME using Simulation: A Case Study of a Manufacturing Company

Palang, Daraka
A Framework for Evaluating the performance of Thai Tourism Industry Supply Chain Management

Pandian, Annamalai
Manufacturing cell layout improvement using Simulation Modeling and Group Technology

Pararta, Wilhelmus Abisatya
Development of Root Cause Analysis Tool for Control Chart

Park, Eui
Understanding Risk Perception Related to Trust and Bias in Cyberspace

Parra, Roberto
Debottlenecking of Conventional Copper Smelters

PARSA, MOSLEM
Selecting The Contractor using Multi Criteria Decision Making Case Study : National Gas Company of Lorestan province of Iran

Parsaei, Hamid
EmployingTechnology To Customize The Flipped Classroom Practice

Paternina, Carlos
Assessing the effect of implementing a port community system platform in the response time of an international terminal: the case of a multi-cargo facility at the Colombian Caribbean coast

patil, anchal
Sonographer Ergonomics: assessment and workplace redesign

Patil, Rajendra
: Enhancement of tube and tube Heat exchanger with semispherical hollow baffle for counter flow

Design and Development of Drilling Jig for Spinning Rings used in Textile Industry

Paul, Tanoy Kumar
Industrial Data Communication- PLC and External Application

Optimized Measures to Improve TAT in Product Maintenance

Pavlova, Inesa
The Significance of Riga Neighbourhoods for the Sustainable Economic Development of the City

Pazhoheshfar, Peiman
In-house Crowdsourcing-based Entity Resolution using argumentation: Issue of Common Names

Perera, Kanthi
Empirical Analysis and Modeling of Learning Curves in The Apparel Manufacturing Industry

PHARWAHA, AMAR PARTAP SINGH
Virtual Instrument for Monitoring Process Parameters: A Versatie Tool for Engineering Education

Philip, Deepu
A Modified ABC Algorithm with Genetic and Neighborhood Search for solving QAP

PIERREVAL, Henri
Risk issues in facility layout design

Poetri, Nabila Priscandy
Predicting The Development Time of Platform For Multiple-Generation Product Using Artificial Neural Network

Pokkiyarath, Manoj
A MODEL TO ASSESS QUALITY OF DISASTER RELIIEF EFFORTS

Poolperm, Pattarawadee
Application of Material Flow Cost Accounting (MFCA) and Quality Control Tools in Wooden Toys Product

Pradeep, Beri
Improving Indian Healthcare using Data Mining

Pratap Singh, Suraj
Facility and Process Layout Analysis of an SME using Simulation: A Case Study of a Manufacturing Company

Premaratne, Priyadharshini
An AHP Based Methodology to Evaluate Social Life Cycle of an Apparel Manufacturing Plant

Perception of female employees towards the Lean and work culture change in apparel industry in Sri Lanka

Pretorius, Jan Harm Christiaan
Developing KPIs for organizations with similar objectives

The Delphi technique: A credible research methodology

Priyono, Anjar
Improving the quality of public transportation using Quality Function Deployement and Kano’s Model

Promentilla, Michael Angelo
Application of Monte Carlo Analytic Hierarchical Process (MCAHP) in the Prioritization of Theme Park Service Quality Elements

Pu, Muhammad
Android Maze Game for Children as an AutismTherapy

Puertollano, Innah Dominique
Determination of Burn-in Period Based on Reliabality Target for Product Failure Time with Weibull Distribution

Pukite, Iveta
Energy Efficiency Improvement Opportunities in Latvia as a Sustainable Development Indicator

Importance of Business Incubators for New Business and its Development in Latvia

Pumkrachang , Santi
An Improvement on Shear Test Equipment for HGA and GR&R Analysis in a Magnetic Head Operation

Qamar, Hafsa
On-Grid Solar Power Systems with Net Metering and Solar Irradiance in Pakistan

Qamar, Summyia
Application Of Concurrent Engineering For Collaborative Learning And New Product Design

CUSTOMER ORDERS PRIORITIZATION USING TOPSIS IN MULTI BUSINESS CHANNEL ENVIRONMENT

Quader, M. Abdul
A review on photosynthetic bioenergy utilizing CO2 from plant flue gas: an approach on microalgae based third generation biofuels production

R, Lokesha
Optimized Measures to Improve TAT in Product Maintenance

Rabah, Bilal
Determination of Safety instrumented level using Fuzzy Risk Graph method Case study: Heater of oil& gas industry

Rabie, Osama
Similarity Measures and Distance Measures Applications: An Analysis and Design of Systems prospective

Rachmadi, Bayu
Applying the Analytical Hierarchy Process to Determine Upstream Competitiveness for Wedding-Planning Industry

Rachman, Amar
Production Efficiency Improvement Through Preventive Maintenance and Production Scheduling Optimization

Rachmania, Ilma Nurul
New Service Development Process in Micro, Small and Medium Enterprises (MSMEs): An Indonesian Case Study

Radaideh, Khaldoon
RTOG Criteria to Evaluate Acute Skin Reaction and its Risk Factors in Patients with Head and Neck Cancer Submitted to IMRT Radiotherapy

RAFIK, BAOUCHE
Facies Analysis and Permeability/porosity Prediction from well log data using the Non Parametric Regression with Multivariate Analysis and Neural Network in the Reservoirs of the Hassi R’Mel Southern Field (Algeria)

Ragab, Adham
Determining the Effect of Key Process Parameters on Forming Force of Single Point Incremental Sheet Metal Forming

Rahim, Abdur
Contour Approach for Analysis of Minimum Regions for the Economic Statistical Design of X-bar Control Charts

rahim azmi, fadhlur
Analyzing the Adoption of Malaysian Standards (MS) on SME Performances: The Mediating Effects of Innovation Adoption Factors

Rahimi Tehrani, Maryam
ANALYTICAL STUDY OF PECKING ORDER THEORY OF CAPITAL STUCTURE;EVIDENCE FROM MALAYSIA

Rahiminezhad Galankashi, Masoud
Agile Supplier Selection: A Fuzzy Analytic Hierarchy Process (FAHP) Approach

Rahiminezhad Galankashi, Masoud
Lean Supplier Selection: A Data Envelopment Analysis (DEA) Approach

Rahman, Mainur
Development of a Computer Aided Learning Tool for PIC Microcontroller

Rahman, Mashiour
Supply chain management in service Quality

Rahman, Md. Atiar
A Model of a Secured Smart e-Health System

Rahman, Md. Mizanur
Evaluate Performance of Earth – Air – Pipe System under Laboratory Condition

Rahman, Md. Mizanur
Renewable energy policy in Germany and Malaysia: Success factors

Save water to save our next generation

Rahman, Mohammad
Predicting Seasonal Demand with Bayesian Generalized Linear Model

Rahman, Shams
Hospital-Supplier Integration: an Assessment of the Driving Factors in the Context of the Saudi Arabian Healthcare System

Raj, Harshita
An Intelligent feature based process planning for Rotational parts

RAJA MOHD RASI, RAJA ZURAIDAH
Green Supply Chain Management: Do They Improves Operational Efficiency and Operational Performance

Rajab, Zaid
A Taguchi-Continuous Simulation Approach to the Injection Molding Blowing Process Quality Improvement

Rakhmaniar, Merlyn
New Service Development Process in Micro, Small and Medium Enterprises (MSMEs): An Indonesian Case Study

Ramaratnam, Bishu
A MODEL TO ASSESS QUALITY OF DISASTER RELIIEF EFFORTS

Ramkumar, J
A Modified ABC Algorithm with Genetic and Neighborhood Search for solving QAP

Ramlan, Rohaizan
Implementation of Fuzzy Inference System For Production Planning Optimisation

Relationship between Human Errors in Maintenance and Overall Equipment Effectiveness in Food Industries

The Relationship between Leadership Styles and Quality Management Practices in Malaysian Manufacturing Firms

Ramlan, Samad
Implementation in-situ auto polishing rate optimization for chemical mechanical planarization process in semiconductor fabrication industry

Ramly, Edly Ferdin
A REVIEW ON OPERATION DIAGNOSIS AND IDENTIFICATION OF OPERATION IMPROVEMENT

The Effects of Lean Production Tools and Techniques Implementation at Malaysian Manufacturing and Service Industries: A Case Study Review

Ranasinghe, Thilini
Empirical Analysis and Modeling of Learning Curves in The Apparel Manufacturing Industry

RANKA, RISHABH
An Integrated Multi-Echelon Stochastic Supply Chain Production-Distribution Model With Carbon Emissions

Rappl, Christoph
Fostering creativity and innovation in engineering design education: A case study

Rashid, Mohammad Mahfujur
Tidal Energy and its Prospects in Bangladesh

Rasti, Amir
Investigation of surface integrity in high speed machining of Ti6Al4V alloy

RATH, RAMESH CHANDRA
THE ROLE OF SERVICE PROVIDERS ON CLOUD COMPUTING TECHNOLOGY FOR A SUSTAINABLE COMPUTER NETWORK

Rautela, Anubha
Assessing Customer Requirements and Preferences for a Perishable Product: A Case of an Indian Cooperative Dairy

Optimization Model for Advertisement Decision A Case of Cooperative Dairy

Raza, Tahir
Prediction Of Failures By Using Crow/AMSAA Model In Microsoft Excel

Revino, Revino
Design Simulation and Information Dashboard for Manufacturing Control Using Systematic Approach: a Case Study of Hospital Beds Production

Reyes, Maritza
Improvement of the manufacturing process of the salicylic acid

RezaeeNik, Ebrahim
Building Information Modeling (BIM): A Study to Prioritize Applications, Risks and Challenges

Rezg, Nidhal
An Optimal Preventive Maintenance Plan According to Power Generation for a Wind Turbine

Production Optimization Problem under Carbone emission Constraint

Rezki, Djamil
Using several intelligences for complex industrial process monitoring :detection and diagnosis

Rezki, Nafissa
Using several intelligences for complex industrial process monitoring :detection and diagnosis

Riaz, Hasnain
Effects of Value Stream Mapping in a Processing Industry

Rimawan, Erry
Musculoskeletal Disorders Among Caregivers in Nursing Home

Rithmanee, Dhiranantha
Creating shared value: How to guide for the Royal Project area

Developing for Sustainable Lanna Cultural Tourism Area

Firm’s Policy Management by using ERP system

Rodriguez-Lozano, Gloria
FINANCIAL INCLUSION IN COLOMBIA: EVOLUTION AND RELATIVE EFFICIENCY

Rohani, Jafri
Aircraft Ground Movement Delay: A Descriptive Statistical Analysis at Kuala Lumpur International Airport

Estimation of compensation cost related to Musculoskeletal Disorder: Younger versus Older Malaysian Manufacturing Workers

The Level of Safety Culture Beliefs and Practices Amongst Safety and Health Officers (SHOs) in Malaysian Manufacturing Companies

Rohayati, Yati
Development of the marketing training model for MSMEs

Roudi, Danial
A Dynamic Multi Agent based scheduling for flexible flow line manufacturing system: UPVC door and window Company

Routhier, François
Prioritization of patients with Communication Disorders

Ruennareenard, Jidapah
Effect of Sintering Temperature on Hydroxyapatite Compact Scaffold Characteristics

Supply Chain Management of Thai Parboiled Rice for Export

Ruiz, Angel
A new risk-based dynamic approach for Prioritizing Surgical Patients’ access to healthcare services

Prioritization of patients with Communication Disorders

Rusman, Muhammad
Optimization Planning for Logistics distribution of rice commodities in South Sulawesi

Rusyaman, Endang
Mean-Variance Portfolio Optimization on Some Stocks By Using Non Constant Mean and Volatility Models Approaches

S, Akshay
Improvising Operational Productivity of Inventory Management in a Retail Store

S.S., Darly
Performance Analysis of Different Controller for PEMFC Fed Adjustable Speed Drives

Saat, Aminuddin
Renewable energy policy in Germany and Malaysia: Success factors

Saberi, Morteza
In-house Crowdsourcing-based Entity Resolution using argumentation: Issue of Common Names

Next Generation of Interactive contact centre for efficient customer recognition

Saberi, Zahra
Next Generation of Interactive contact centre for efficient customer recognition

Sabone, Mogale
Framework for Decision Support Tool for Quality Control and Management in Botswana Manufacturing Companies

Sabri, Yasmine
Addressing Supply Chain Configuration Practices: Evidence from Italian Best Performer Valve Suppliers for the Oil & Gas Industry

sadeghi, mohammad hossein
Investigation of surface integrity in high speed machining of Ti6Al4V alloy

Saha, Chanchal
Application Of Concurrent Engineering For Collaborative Learning And New Product Design

CUSTOMER ORDERS PRIORITIZATION USING TOPSIS IN MULTI BUSINESS CHANNEL ENVIRONMENT

Sahay, Mridula
AUGUMENTING EXCELLENCE IN MANUFACTURING: A STRATEGIC DYNAMIC APPROACH

Improvising Operational Productivity of Inventory Management in a Retail Store

Sai Prudhvi Siddhartha, Lakkimsetti
A Social Network Based Optimisation Approach on Patient Admission Scheduling Problem

Said, Elfezazi
Production Management Model Integrating Green and Lean Six Sigma

Said, Muhammad Asyraf
Solutions to ammoniacal nitrogen presence in CMP effluent from oxide process

Saini, Anil Kumar
Business Intelligence and Analytics: Paving way for Operational Excellence in Indian Banks

Towards Risk Managed Cloud Adoption A Conceptual Framework

Sajjad, Muhammad Hamad
Six Sigma Implementation

SALEH, Mohammed
Determining the Effect of Key Process Parameters on Forming Force of Single Point Incremental Sheet Metal Forming

Saleheen, Ferdoush
Supply chain management in service Quality

Salim, Bouslikhane
Production Optimization Problem under Carbone emission Constraint

Salimi Beni, Saeed
Index Selection of Monitoring Technical Inspection Department in National Iranian Gas Company

Samad, Abdul
Organizational factors for implementing TQFD

Samanta, Suman
A Framework for Improving Productivity of SMEs Economically

A Modified ABC Algorithm with Genetic and Neighborhood Search for solving QAP

Samman, Shatha
Human Error in Multitasking Environments

Sampaio, Paulo
Improving organizations performance through Supply Chain Quality Management practices

Samuel, Cherian
Capacity Planning For Diabetes Management -Indian Example

samuel, taiwo
Anthropometric Data Variation Within Gari-frying Population

Anthropometric Data Variation Within Gari-frying Population

Sandy, Ignatius
Understanding the Impulsiveness Effect of a Web Design on Online Fashion Stores

Sani Bajgiran, Jalal
Building Information Modeling (BIM): A Study to Prioritize Applications, Risks and Challenges

Sanjeevan, Nadarasa
Selecting the best layout for the container terminal using Modeling and Simulation Techniques

saremi, sogol
A Multi Objective Robust Model for Capacity-Constraint Hub-Covering Flow Problem

Sarpani, Sinta
Designing Process Improvement of Order Fulfillment in an Indonesian Lubricant Company Using Business Process Reengineering Method

Sato, Chihiro
A Study on the Business Strategy of Highly Profitable Electronic Component Manufacturers

Saxena, Kulbhushan
Towards Risk Managed Cloud Adoption A Conceptual Framework

Schmidt, Thorsten
Simulation of Extended Resource Constrained Scheduling Problem with a Soft Computed Priority Heuristic

Seifbarghy, Mehdi
Multi-server Congested Location Allocation Problem with Multiple Objectives

Waiting time duration-constrained Close-Open Mixed Vehicle Routing Problem with Semi Soft Time Window solved by Genetic algorithm and Tabu Search

Selamat, Mohamad Hisyam
HR Practices and organizational commitment among SME employees which leads to retention

Senanayake, Chanaka
Empirical Analysis and Modeling of Learning Curves in The Apparel Manufacturing Industry

SENGUNTHAR, DEEPAK PANNEER SELVAM
Selection of Green suppliers based on GSCM practices: Using fuzzy MCDM approach in an Indian Electronics Company

Septivani, Nike
Research on BRT Driver Jakarta Fatigue Evaluation

Sethi, Prabhneet Kaur
A study on the Profitability Analysis of Power Grid Corporation of India Ltd

Optimal promotional policy for a new product in presence of firm’s goodwill in Segmented Market: A control theoretic Approach

Setiawan, Eko
Can Resource Sharing Improve Disaster Response Effectiveness? Evidence from West Sumatra Earthquake

Setiawati, Cut Irna
Application System for Smart Supply Chain Management (SCM): Case Study of SMEs in Indonesia

Applying the Analytical Hierarchy Process to Determine Upstream Competitiveness for Wedding-Planning Industry

Setyana, Aditya Putra
Multi-Attribute Control Chart Design for Bronze Pipe Fittings Production

Setyaningsih, Santi
New Service Development Process in Micro, Small and Medium Enterprises (MSMEs): An Indonesian Case Study

Sevinc, Mete
Innovation Clusters and Determinants of Innovativeness in Manufacturing Industries

Sewwandi, S.
Perception of female employees towards the Lean and work culture change in apparel industry in Sri Lanka

Shaban, Yasser
Identifying Optimal Intervene Hazard for Cutting Tools Considering Cost-availability Optimization

Visual data mining of faults in machining process based on machine learning

Shafiee, Mahmood
Development of a condition index matrix to support technical feasibility of life extension in the offshore oil and gas industry

Shafiq, Amber
Model of Violator Detector Network Problem: A case study Sioux Falls Network

Shafizadeh, Hamid
The Psychology of the Competition in High-Tech Industries

Shah, Bhavin
Design and assessment of lean handling buffers in forward-reserve model

SHAH, ZAHID ABBASS
An Investigation of Lean Manufacturing Implementation in Textile Sector of Pakistan

Ergonomic design of workstation for a labeling task

Ergonomic Risk Factors for Workers in Garments Manufacturing – A Case Study from Pakistan

Shahdi-Pashaki, Saleh
Resource Management For Workflows In Cloud Computing Environment Based On Group Technology Approach

Shahjahan, Md
Use of Smokeless Tobacco by Low Socio-economic Populations and Risk Factors Associated with it

Shahmoradi-Moghadam, Hani
A Multi Objective Robust Model for Capacity-Constraint Hub-Covering Flow Problem

Shaikh, Ghulam Yasin
Optimization of Loading Time of Pallets on Shifting Truck by Suggested Operating Procedure (SOP) at a Fast Moving Consumer Goods Producing Company.

“Performance Evaluation”&”Problems Identifications in Warehouses” OF THIRD-PARTY Logistics

Shaikh, Shakil
An investigation into the impact of advance manufacturing technologies implementation in SMEs manufacturing plastic packaging products- A case study of Pakistan

Consideration of economics and ergonomics aspects in the design and manufacturing of Hydraulic Floor crane

Effects of Value Stream Mapping in a Processing Industry

Shama Zabeen, Shaik
A Social Network Based Optimisation Approach on Patient Admission Scheduling Problem

Shamayleh, Abdulraim
Capacitated Lot-Sizing and Scheduling with Sequence-Dependent setups in Petrochemical Plants

Cost Minimization in Data Batch Processing

SHAMS KHORRAMABADI, HESHMAT
Selecting The Contractor using Multi Criteria Decision Making Case Study : National Gas Company of Lorestan province of Iran

SHAMSUDDIN, ALINA
Workplace Ergonomics and Employees’ Health: A Case Study at Automotive Manufacturer

Sharif, Safian
Measuring Product Sustainability Using Fuzzy Method

ProSET: A Decision Support System for Sustainability Performance Evaluation

Shariff, Azmi Mohd
AHP-Based Conceptual Model for Selection of Key Elements for Safety Culture Using SMART Criteria

Sharma, Ila
SOCIAL NETWORK ANALYSIS BASED EVOLUTIONARY ALGORITHIMIC APPROACH TO IDENTIFY THE INFLUENCE OF HUBS ON FLEXIBLE SCHEDULING PROBLEMS

SHARMA, MEGHA
Reliable capacitated facility location problem: SAA based approach

Sharma, R.R.K.
Determinants of the Scope of Supply Chain E-Collaboration

Dual Based Procedure for the Single Stage General Minimum Cost Flow Problem

Factors Affecting Consumers’ purchasing Decision through E-Commerce

Influence of culture on E-commerce and vice versa

Key RFID implementation factors affecting “sourcing” decision of RFID systems in supply chain of manufacturing industry

Relating E-integrated, Triple-A Supply Chain to Environmental Uncertainty, Market Competition and Firm Performance

Relating Supply Chain E-Integration to Organizational Strategy

Relating Supply Chain Risks to Supply Chain Strategy

Sharma, Rohit
Selection of Green suppliers based on GSCM practices: Using fuzzy MCDM approach in an Indian Electronics Company

Sharma, S K
Capacity Planning For Diabetes Management -Indian Example

Assessing Customer Requirements and Preferences for a Perishable Product: A Case of an Indian Cooperative Dairy

Optimization Model for Advertisement Decision A Case of Cooperative Dairy

Sheikh, Farooq
Sniping as a Rational Strategy on Ebay

Sheikh, Mohsin
Optimization of Loading Time of Pallets on Shifting Truck by Suggested Operating Procedure (SOP) at a Fast Moving Consumer Goods Producing Company.

Shekarian, Ehsan
Analyzing optimization techniques in inventory models: the case of fuzzy economic order quantity problems

The effect of human learning with cognitive and motor capabilities on a fuzzy EOQ model

Sheu, Myron
Big Data Business Analytics: Attitude and Readiness

shihata, Lamia
Introducing Radio Frequency Identifation into Lean Manufacturing ; An application in garment industry

Shimakawa, Yoichi
An Analytical Framework for Local Impacts of Road Pricing Policy: A Case Study of the Tokyo Metropolitan Area

An estimation of land price by kriging using geographic information system

Shinde, Shivam
Design and Development of Drilling Jig for Spinning Rings used in Textile Industry

SHIROUYEHZAD, HADI
Selecting The Contractor using Multi Criteria Decision Making Case Study : National Gas Company of Lorestan province of Iran

Shuangquan, Huang
PSI-Cockpit: A Supply-Demand Planning System Focusing on Achieving Goals through Resolving KPI Conflicts

Siahpour, Maral
Developing a Multi-objective Model for Locating a New Warehouse for Bama’s Chain Store

Siddique, Sara
Personal Competency Assessment and Competence Building: A Study of Pakistani Project Management Scholars

Siddiqui, Farhan Qutab
Development of an Expert System for the Feasibility Assessment of Renewable Energy Projects

Silva, Chathurani
The Impact of ICT Usage on Collaborative Product Development Performance: A Conceptual Model and Industry Perspective

SINGARI, RANGANATH M.
Application of Fuzzy Logic and Fuzzy Systems in Machining: A Literature Review

Grey fuzzy optimization of cutting parameters on Material Removal Rate and Surface Roughness of Aluminium

SINGH, NAVPREET
Adjustable Turning Radius Steering Mechanism (Chandok’s Raft steering system)

SINGH, RAJ KUMAR
An Integrated Multi-Echelon Stochastic Supply Chain Production-Distribution Model With Carbon Emissions

Singh, Rajdeep
SETUP TIME REDUCTION USING SMED IN A MANUFACTURING INDUSTRY: A CASE STUDY

Singh, Rohit Kumar
VALUE CHAIN OPTIMIZATION IN OVERSEAS PROCUREMENT USING LPP

SINGHAL, SHUBHAM
Application of Fuzzy Logic and Fuzzy Systems in Machining: A Literature Review

Grey fuzzy optimization of cutting parameters on Material Removal Rate and Surface Roughness of Aluminium

Sinha, Aman
VALUE CHAIN OPTIMIZATION IN OVERSEAS PROCUREMENT

Sinha, Aman
VALUE CHAIN OPTIMIZATION IN OVERSEAS PROCUREMENT USING LPP

Sinha, Priyank
Dual Based Procedure for the Single Stage General Minimum Cost Flow Problem

Use of Interdiction Models to evaluate the Robustness of two Echelon Supply Chain for Minimum Service level

Sirajuddin, Sirajuddin
Improving Indonesian logistics performance with using six sigma, DMAIC and integration Process

Sirisawat, Pornwasin
A Study of Green Procurement Practices: A Case Study of the Computer Parts Industry in Thailand

Siswanto, Nurhadi
Mathematical Model for Maritime Inventory Routing Problem with Multiple Time Windows

Skeepers, Natalie
Driving safety performance in the construction industry through safety induction and training – as a leading measure

Improving health and safety in the construction industry through cultural transformation

Soliman, Mohamed
Enterprise Resource Planning (ERP) Systems in the Egyptian Higher Education Institutions: Benefits, Challenges and Issues

Soonpracha, Kusuma
A Practical Case Study of a Heterogeneous Fleet Vehicle Routing Problem with Various Constraints

Soonthornvipat, Thanyawan
Firm’s Policy Management by using ERP system

Sopadang, Apichat
THE ANALYSIS OF AIRPORT OPERATIONAL PERFORMANCE CASE STUDY: CHIANGMAI INTERNATIONAL AIRPORT, THAILAND

Soroor, Javad
Autonomic Learning Algorithm to Predict Stock Price at the Exchange via Metaheuristics-Based Optimization

Sorooshian, Shahryar
Performance Measurement System and Business Performance Measurement System: A Comparative Study

SP, Srinivasan
IMPROVEMENT OF TEST CELL UTILIZATION USING SIX SIGMA METHODOLOGY

Srivastava, Neelam
On the Energy detection of unknown signals over fading channel for different diversity combining techniques

Staiti, Mujahed
Impact of Change Orders In Construction Sector In The West Bank

SUBRAMANIAM, SUVITHA
FABRICATION OF FRACTURE AID USING RAPID PROTOTYPING

Sudasna na Ayudthya, Prapaisri
D-Optimal Equivalent-Estimation Second-Order Strip-Strip-Plot Designs for Three Multi-Stage Processes

Sudiro, Susanto
Design Simulation and Information Dashboard for Manufacturing Control Using Systematic Approach: a Case Study of Hospital Beds Production

Measuring Production Floor Performance Using Systematic Approach : a Case Study of Hospital Beds Production

Sudtachat, Kanchala
A Two-stage Stochastic Programming Model for Districting and Transportation Lot-size of Sugarcane

Sukono, F
Mean-Variance Portfolio Optimization on Some Stocks By Using Non Constant Mean and Volatility Models Approaches

Sulaeman, Erwin
A Prospective Solution for Consistent Aerostatic Lift for a Hybrid Buoyant Aircraft

Sumita, Ushio
Analysis of VOC (Voice of Customer) Data for Assessing Corporate Image of a Housing Equipment Company

Development of Effective Marketing Strategies for a Housing Equipment Company Based on Analysis of Sales Data and Sales Personnel

Structural Analysis of Page Access Behaviors of Sessions at Website of a Housing Equipment Company

Sumitani, Yasushi
An Analytical Framework for Local Impacts of Road Pricing Policy: A Case Study of the Tokyo Metropolitan Area

Supian, Sudradjat
Applications De Bruijn Graphs of Hamiltonian and Eulerian Cycles to Fault Tolerant Networks

Mean-Variance Portfolio Optimization on Some Stocks By Using Non Constant Mean and Volatility Models Approaches

Supriatna, Asep Kuswandi
Applications De Bruijn Graphs of Hamiltonian and Eulerian Cycles to Fault Tolerant Networks

Surapunt, Tisinee
Asssessment of Thai Check Point for Border Trade Operations

Suresh Tiwari, Suman Tiwari
The Relationship between Leadership Styles and Quality Management Practices in Malaysian Manufacturing Firms

SURESHKUMAR, SARANYA
FABRICATION OF FRACTURE AID USING RAPID PROTOTYPING

Surjandari, Isti
Application of Text Mining for Classification of Textual Reports: A Study of Indonesia’s National Complaint Handling System

Multi-Attribute Control Chart Design for Bronze Pipe Fittings Production

Review on some Multivariate Statistical Process Control Methods for Process monitoring

Survilo, Tatjana
Increasing the competitiveness of the city with energy efficiency measures possibilities for Latvian cities

Increasing the competitiveness of the city with energy efficiency measures – possibilities for Latvian cities

The Significance of Riga Neighbourhoods for the Sustainable Economic Development of the City

Susanto, Novie
Design of Human Cognitive Model in A Self-Optimizing Assembly Cell: A Case Study of Indonesian

Suswanto, Rendhie
River’s Rubbish Catcher Machine (RRC-Machine), The Planning of A Machine Instrument To Catch The Rubbish In the River Towards Healthy Environment

Suwanwong, Tipavinee
THE ANALYSIS OF AIRPORT OPERATIONAL PERFORMANCE CASE STUDY: CHIANGMAI INTERNATIONAL AIRPORT, THAILAND

Suyudi, Mochamad
Applications De Bruijn Graphs of Hamiltonian and Eulerian Cycles to Fault Tolerant Networks

Suzianti, Amalia
Designing Laptop Based On Costumer Preference Using ECQFD and TRIZ Methods

Predicting The Development Time of Platform For Multiple-Generation Product Using Artificial Neural Network

Suzuki, Toshihiro
Applying Human Centered Design Process to Hitachi’s Integrated Plant Construction System

Sy, Charlle
A Decision Support Model for Spare Parts Inventory in a Multi-Echelon Closed Loop Supply Chain

An Optimization Model for Managing System Inventories in a Disaster Supply Chain

Sy, John Derrick
Prepositioning of relief goods under network uncertainty for tropical cyclones with information updates: a humanitarian supply chain

Syarkawi Rauf, Muhammad
Improving Indonesian logistics performance with using six sigma, DMAIC and integration Process

Syed, Nazish Quadri
Design and Manufacturing of Automobile Testing Track Sweeping Machine

Sygulla, Ronny
Framework of an ‘(In)Efficiency Costing’ based on the idea of Material Flow Cost Accounting

Material Flow Cost Accounting in Supply Chains – Challenges and Approaches

Taha, Mandy
Near Optimal Solution for Green Vehicle Routing Problem

Tahan-Bouria, Mohammadreza
A Comparative Study of ANFIS and ANNs Models for Performance-Based Condition Monitoring of Industrial Gas Turbines

Taheri, Javad
Case Averaging as a Tool for Operational Efficiency in GI Endoscopy

Takagi, Hiroaki
Analysis of VOC (Voice of Customer) Data for Assessing Corporate Image of a Housing Equipment Company

Takahashi, Hirotaka
An Analytical Framework for Local Impacts of Road Pricing Policy: A Case Study of the Tokyo Metropolitan Area

Takale, Suraj
Design and Development of Drilling Jig for Spinning Rings used in Textile Industry

Takeda, Hitosh
Debugging Operation of Automated Assembly Lne using Signal Noise Ratio

Takegami, Eizaburo
Applying Human Centered Design Process to Hitachi’s Integrated Plant Construction System

Taki, Seiko
Study on Life Log of Female Parent during Child Care in Japan

talaat, Amr
Introducing Radio Frequency Identifation into Lean Manufacturing ; An application in garment industry

TAMBE, PRAVIN
A Methodology for Simultaneously Optimizing Selective Maintenance Decision and X-Control Chart Parameters

Cost Based Failure Consequence Approach for Identifying Critical Components for Maintenance Support Decision

Tan, Bee Hoon
Eliminating Salicide Residues in Wafer Fabrication Front-End Pre-Metal Layer Cleaning Process

Tan, Chan Sin
Diverse Possibility of Fit Manufacturing Principle Into Value Stream Mapping(VSM) and Its Impact: A Review

Productivity Assessment Based on Different Perspectives in Industries: A Review

Tangamporn, Napassawan
Creating shared value: How to guide for the Royal Project area

Tansuchat, Roengchai
Supply Chain Management of Thai Parboiled Rice for Export

Tantiphanwadi, Prapassorn
D-Optimal Equivalent-Estimation Second-Order Strip-Strip-Plot Designs for Three Multi-Stage Processes

Taran, Ekaterina
YOUR OPINION MATTERS: A CROSS-SECTIONAL STUDY ON HAPPINESS AMONG OLDER ADULTS IN SIBERIA

Tatehora, Kazuto
Applying Human Centered Design Process to Hitachi’s Integrated Plant Construction System

Tavakoly Nabavy, Niloofar
Identifying Factors Affecting Entrepreneurial Sustainable Development (Case Study: Knowledge-Based Start-Ups of Science and Technology Park of Tehran University)

Tayyab, Aisha
Application Of Concurrent Engineering For Collaborative Learning And New Product Design

Teoh, Yong Siang
Hidden Wastes in Overall Equipment Effectiveness (OEE) under the study of Maynard’s Operation Sequence Technique (MOST)

Tesavrita, Ceicalia
Analyzing Technical and Social Dimension in Knowledge Sharing Intention Behavior in E-learning System

Teymourian, Ehsan
Resource Management For Workflows In Cloud Computing Environment Based On Group Technology Approach

Tezuka, Masaru
An Improved Analogy-based Demand Forecasting Method for Service Parts

Importance of the Strategic Utilization of Information Technology in Small and Medium-Sized Food Manufacturers in Japan

Thaba, Sebonkile
The Impact of Lack in Occupational Health and Safety Implementation in Small Businesses

The Implementation of Team development Process in Cooperative Enterprises

thampi, hari krishnan
Organizational factors for implementing TQFD

Thanyarak, Thidarat
APPLICATION OF THE SIX-SIGMA CONCEPT TO TIME REDUCTION FOR RESIN RECIRCULATE RINSE IN DEMINERALIZED WATER PRODUCTION

Theko, Sydney
The impact of Process Improvement initiatives in manufacturing industry in South Africa

Thongrattana, Phatcharee
The Impact of Structure of Interdependence on Supplier Performance in the Local Pineapple Processing Supply Chain in Thailand: a Mixed Method Research

Tipmontian, Jedsada
Application of Material Flow Cost Accounting and System Dynamics Approach for Waste Reduction and Sustainable Food Manufacturing Development in Thailand

Tippayawong, Korrakot Y.
A Build-or-Lease Case Study for a Potential New Warehouse Due To Increasing Storage Capacity Requirements

Tippayawong, Korrakot Yaibuathet
A Framework for Evaluating the performance of Thai Tourism Industry Supply Chain Management

Tjiang, Lien
Performance Measurement in PT. XYZ Using The Balanced Scorecard (a case study of PT. XYZ)

Toth, Peter
Learning strategies of post-secondary students

Touriki, Fatima Ezzahra
Road Map for the Implementation of Lean production tools in SMEs

Travaglini, Agnese
Megaproject case studies: a stakeholder management perspective

Supporting Decisions on Industrial Plant Modularization: A Case Study Approach in the Oil and Gas Sector

Triantoro, Wegit
Feasibility Analysis of Indonesian Traditional Shipping Industry to Strengthen Domestic Maritime Logistic System

Tu, Zhengkai
Thermochemical Processing of Biomass: Graphic User Interface Models for Costing and Material Balances

Tuntitippawan , Naritsak
An Artificial Bee Colony Algorithm for the Vehicle Routing Problem with Backhauls and Time Windows

Uddin, M. Alhaz
Optimal Control Applied to Dynamic Model of Climate Change: A Bangladesh Scenario

Uddin, Moin
Productivity Improvement of Cutting, Sewing and Finishing Sections through Value Stream Mapping – A Case Study.

ul Haque, Anwar
A Prospective Solution for Consistent Aerostatic Lift for a Hybrid Buoyant Aircraft

Ulinuha, Agus
Application of Decoupled Harmonic Power Flow for Assessment of Harmonic Passive Filter Size and Location

Ulusoy, Gündüz
Innovation Clusters and Determinants of Innovativeness in Manufacturing Industries

Uppala, Akshay
Selection of Green suppliers based on GSCM practices: Using fuzzy MCDM approach in an Indian Electronics Company

Urabe, Shintaro
PSI-Cockpit: A Supply-Demand Planning System Focusing on Achieving Goals through Resolving KPI Conflicts

V.R., Pramod
Organizational factors for implementing TQFD

Vali, Lila
Quantitative Optimization of Nurses in Emergency Department of Teaching Hospital: A case study

Van Wyk, Therese
Model development to monitor and control energy consumption in South Africa

vatankhah barenji, ali
A Dynamic Multi Agent based scheduling for flexible flow line manufacturing system: UPVC door and window Company

Developing manufacturing execution software as a service for small and medium size enterprise

Vatankhah Barenji , Reza
A Dynamic Multi Agent based scheduling for flexible flow line manufacturing system: UPVC door and window Company

Developing manufacturing execution software as a service for small and medium size enterprise

Venkatesh, Madhupreetha
Minimizing fluctuation in commodity pricing using Dynamic Simulation

Verma, Pratima
Facility and Process Layout Analysis of an SME using Simulation: A Case Study of a Manufacturing Company

Structure, Evaluation System, and Employee Resistance: Impediments to Horizontal Strategy Implementation in Diversified Corporations

The Linkages between Horizontal Strategy, Person-Environment fit and Horizontal Fit: An Empirical study

The Role of Management Control System in ERP Project Implementation

Victor, Berlin Hency
A Survey Of Routing Protocols Of Wireless Sensor Network With Mobile Sinks

Victor Makarovich , Zaernjuk
Analyzing the Success Rate of Strategic and Tactical Economic Sanctions; A strategy for Russian economic planning

Developing a Risk Based Maintenance; A Case study – Low Density Polyethylene (LDPE) production unit of Amir Kabir Petrochemical complex in Iran

Villamin, Josephine
PROBLEM-SOLVING, DECISION MAKING AND MANAGERIAL SKILLS OF ENGINEER-MANAGERS IN SELECTED SMALL-TO-LARGE SCALE ENTERPRISES IN LAGUNA

Villanueva, Rachel
Assessment on 5S System of Rules in a Cosmetics Manufacturing’s Central Weighing Area, Processing and Packaging Area for Creams, Liquids and Lotions (CLL)

Improvement of Productivity Rate of JIT #262, Creams, Liquids, Lotions Department of a Cosmetics Company

Villarreal, Bernardo
A Proposed Hybrid Scheme for Eliminating Road Transportation Waste

A Sequential Truck Transportation Waste Reduction Scheme

Hybrid Schemes for Eliminating Road Transportation Waste

VISHVAKARMA, NIRAJ KUMAR
Key RFID implementation factors affecting “sourcing” decision of RFID systems in supply chain of manufacturing industry

Völker, Michael
Simulation of Extended Resource Constrained Scheduling Problem with a Soft Computed Priority Heuristic

Vosoughi, Shiva
Identifying Factors Affecting Entrepreneurial Sustainable Development (Case Study: Knowledge-Based Start-Ups of Science and Technology Park of Tehran University)

vps Bathusha Hamind , Mehrunishah Begum
HR Practices and organizational commitment among SME employees which leads to retention

Vyas, Ronak
Optimal Aggregate Production Planning by using Genetic Algorithm

Wahab, Eta
Workplace Ergonomics and Employees’ Health: A Case Study at Automotive Manufacturer

wahba, michael
Introducing Radio Frequency Identifation into Lean Manufacturing ; An application in garment industry

Wahid, Abdul
Consideration of economics and ergonomics aspects in the design and manufacturing of Hydraulic Floor crane

Wang, Yao-Chin
Project Management for New Sputtering System Development

Wangphanich, Pilada
A Study of Green Procurement Practices: A Case Study of the Computer Parts Industry in Thailand

WANITWATTANAKOSOL, Jirapat
Asssessment of Thai Check Point for Border Trade Operations

WARA, TRITHAM
Remote Global Alignment Error for Pad Inductor Layer To Improve The Cycle Time

wasim, ahmad
Application Of Concurrent Engineering For Collaborative Learning And New Product Design

Wattanutchariya, Wassanai
Effect of Sintering Temperature on Hydroxyapatite Compact Scaffold Characteristics

Supply Chain Management of Thai Parboiled Rice for Export

Wejwitwarakul, Jiratthavee
Application of Lean Manufacturing Concepts to Reduce Manufacturing Lead Times within the Meatball Production Process

Wibisono, Dermawan
Proposed Performance Management System for Indonesian Ministry of Health Using Integrated Performance Management System

Wibowo, Alan Dwi
The dynamics of Indonesian rice supply chain

Wichaisri, Sooksiri
Asssessment of Thai Check Point for Border Trade Operations

Widada, Hari
OPTIMIZATION OF THE ACID CATALYST CONCENTRATION FOR SYNTHESIS OF ANTI-CANCER AGENT GAMAVUTON-0 BY USING MATHEMATICAL AND STATISTICAL SOFTWARE

Widiastri, Dhea
Understanding the Impulsiveness Effect of a Web Design on Online Fashion Stores

Widyadana, Gede Agus
Inventory Routing Problem for Deteriorating Items with Multi Tours

Wijaya, Didy Putra
OPTIMIZATION OF THE ACID CATALYST CONCENTRATION FOR SYNTHESIS OF ANTI-CANCER AGENT GAMAVUTON-0 BY USING MATHEMATICAL AND STATISTICAL SOFTWARE

Wirapraceka, Indra
Proposed Performance Management System for Indonesian Ministry of Health Using Integrated Performance Management System

Wisittipanich, Warisa
Particle Swarm Optimization for Just-In-Time Trucks Scheduling in Cross Docking Terminals

Wong, Adam
Second-movers’ advantage of utilizing Big Data to enhance sustainability performance: the case of elevator industry

Wong, Jing Ping
Critical Success Factors of Six Sigma Implementation in Malaysian Manufacturing Industry

Wong, Whee Yen
A Case Study Assessment of Project Management Maturity Level in the Malaysia’s IT Industry

Wongweragiat, Sudaratana
The Impact of Structure of Interdependence on Supplier Performance in the Local Pineapple Processing Supply Chain in Thailand: a Mixed Method Research

Wood, Joseph
An Investigation Into Bearing Fault Diagnostics for Condition Based Maintenance Using Band – Pass Filtering and Wavelet Decomposition Analysis of Vibration Signals

Wu, Wen-Fang
Reliability Analysis of a Motor Control Unit Used in Electric Vehicles

Wulandari, Sari
Development of the marketing training model for MSMEs

Wulff, Alfred
Integration of Business Process management and Big Data technologies

Wunck, Christoph
Implementation of Mobile Event Monitoring Agents for Manufacturing Execution and Intelligence Systems Using a Domain Specific Language

Integration of Business Process management and Big Data technologies

Wut, Edmund
Second-movers’ advantage of utilizing Big Data to enhance sustainability performance: the case of elevator industry

Xiaofeng, Hui
Investigation of Trade Credit Patterns in Effect with Bank Loan Availability

Yaakub, Noor Hamizah
Awareness, Implementation, Effectiveness and Future Adoption of Operational Improvement Initiatives: Survey Results

Yacout, Soumaya
Identifying Optimal Intervene Hazard for Cutting Tools Considering Cost-availability Optimization

Visual data mining of faults in machining process based on machine learning

Yahya, Mohd Shahir
A REVIEW ON OPERATION DIAGNOSIS AND IDENTIFICATION OF OPERATION IMPROVEMENT

Awareness, Implementation, Effectiveness and Future Adoption of Operational Improvement Initiatives: Survey Results

The Effects of Lean Production Tools and Techniques Implementation at Malaysian Manufacturing and Service Industries: A Case Study Review

Yap, Seok Gee
A Case Study Assessment of Project Management Maturity Level in the Malaysia’s IT Industry

Yeoh, Kar Peng
A Case Study Assessment of Project Management Maturity Level in the Malaysia’s IT Industry

Yi, Zelong
A New Software Reliability Growth Model with Introduction of New Defects in the Test Process

Yildirim, Serkan
Disambiguation Points Sampling Heuristic for the Stochastic Obstacle Scene Problem

Yokosuka, Yasuaki
Applying Human Centered Design Process to Hitachi’s Integrated Plant Construction System

Yokoyama, Hajime
Resolution of Resource Contentions in the Critical Chain Project Management based on Simulated Annealing

Yousef, Hassan
Prediction of Oil Well Flowing Bottom-hole Pressure in Petroleum Fields

Yuangyai, Chumpol
Multiple Performance Optimization forHuman-Robot Collaboration: a Translation Motion in a Tele-Sandblasting Maintenance System

Yudha, Irham Satria
Designing Laptop Based On Costumer Preference Using ECQFD and TRIZ Methods

Yuniarto, Hari Agung
Development of Root Cause Analysis Tool for Control Chart

Yusuf, Ike Mercia
Analyzing Technical and Social Dimension in Knowledge Sharing Intention Behavior in E-learning System

Z.Sutalaksana, Iftikar
Fatigue from driving – a comparison between morning and afternoon tasks

Zaghloul, Mohamed
Tolerance Analysis using An alternative to Monte Carlo simulation

Zagloel, Teuku Yuri M.
Improving Indonesian logistics performance with using six sigma, DMAIC and integration Process

Literature review of Industrial Competitiveness Index : research gap

Literature review of Physical Delivery Service Quality : type of research and research gap

Motion and Time Study : Measurement of Workstation For Piston Assembly Line Considering Anthropometric For Indonesian People

Zahid, Taiba
Simulation of Extended Resource Constrained Scheduling Problem with a Soft Computed Priority Heuristic

Zai, Jazib
Optimization of Loading Time of Pallets on Shifting Truck by Suggested Operating Procedure (SOP) at a Fast Moving Consumer Goods Producing Company.

Zainol, Zaina Norhallis
Heat transfer through fire fighter’s protective clothing exposed to thermal radiation.

Zantua, Sherilyn
Optimization of Warehouse Operations for Logistics Company in the Philippines

Optimization of Warehouse Operations for Logistics Company in the Philippines

Zeltins, Namejs
Energy sector process control system to ensure achievement of energy efficiency targets in Latvia: a case study

Zermane, Hanane
Development of an internet-based fuzzy control system of manufacturing plant

Zghair, Hayder
Rework Impact on BIW Production System Optimization Using Six Sigma Analysis

Zhang, Yao
Project Investment Decision Considering Background Risks

Zia, Babak
Identifying Factors Affecting Entrepreneurial Sustainable Development (Case Study: Knowledge-Based Start-Ups of Science and Technology Park of Tehran University)

Zied, Hajej
An Optimal Preventive Maintenance Plan According to Power Generation for a Wind Turbine

Production Optimization Problem under Carbone emission Constraint

Zulkifli, Ahmad Syahmi Arham Bin
Minimum Quantity Lubrication in Micromachining: A Greener Approach

Zuraida, Rida
Fatigue from driving – a comparison between morning and afternoon tasks

Research on BRT Driver Jakarta Fatigue Evaluation

Proceedings – Sixth Annual Conference on Industrial Engineering and Operations ManagementMarch 8-10, 2016, Kula Lumpur, Malaysia

Proceedings – Sixth Annual Conference on Industrial Engineering and Operations Management
March 8-10, 2016, Kula Lumpur, Malaysia