Proceedings – Fourth International Conference on Industrial Engineering and Operations Management
Grand Hyatt Hotel, Bali, Indonesia, January 7 -9, 2014
ISSN: 2169-8767 (U.S. Library of Congress) ISBN: 978-0-9855497-1-8
ID 004: To What Degree Is Sustainability Practiced In South African Paper Manufacturing Companies?
Johannes Mapokgole, University of Johannesburg, South Africa
Saad Suliman, University of Bahrain
Shakib Zohrevandi, Payam Noor University of Tehran, Iran
ID 009: A Facility Layout Selection Model using MACBETH Method
Prasad Karande, Government Polytechnic, Mumbai, India
ID 010: Practices and Problems – Fixing Loose Ends of Shared Services Governance
Simon Maabe, and Charles Mbohwa, University of Johannesburg, South Africa Paulin Mbecke, Council for Scientific and Industrial Research, South Africa
ID 013: A TOC-OEE Based Scheme to Improve Productivity
Bernardo Villarreal, and Nancy López, Universidad de Monterrey, Mexico
ID 015: Application of Lean Six Sigma in Entertainment Industry by Integration of Risk management
Tariq Aziz and Mohammed Sharaf Fathe, King Saud University, Saudi Arabia
Mohammad Israr, Balaji Engineering College, Junagadh, Gujarat, India Anshul Gangele, Institute of Technology & Management, Gwalior, India
ID 017: Priority of Reduction Ways for Heating Systems in Yazd greenhouse
Alimohammad Rezai, Yazd Gas Co, Iran
Hasan Hkademi Zare, Mohammadhosien Abooei, and Ali Mostafaeipour, Yazd Universit, Iran Fatemah Hakimi, NIOPDC, Iran
ID 020: Use of Physical and Numerical Models in Engineering Design Education
Saidani, Messaoud and Abdussalam Shibani, Faculty of Engineering and Computing, Coventry University, UK
ID 021: Structural Analysis: Challenges and Opportunities
Messaoud Saidani and Abdussalam Shibani, Coventry University, UK
Madhavendra Saxena, Singhania University, Rajasthan, India
R.P. Rajoria, and Manoj Gupta, Poornima University, India
ID 024: Assessing Service Quality in Higher Education using SERVQUAL Tool
Grace Kanakana, Tshwane University of Technology, South Africa
ID 025: Optimization of ED Machining of SiC Parameters
Ramezan Ali Mahdavinejad, University of Tehran, Tehran, Iran
ID 026: Optimization of Cutting Speed in Steel Turning
Ramezan Ali Mahdavinejad, University of Tehran, Iran
ID 028: Abrupt Organizational Transformational Process Hinders Collaborative Innovation Initiatives!
S. Asiya Z. Kazmi, and Marja Naaranoja, University of Vaasa, Finland
ID 029: Creating `Optimal Teams` through `Transformational Leadership´!
S. Asiya Z. Kazmi, Josu takala, and Marja Naaranoja, University of Vaasa, Finland
ID 030: Challenges Associated with Cool Chain Management System!
S. Asiya Z. Kazmi, and Marja Naaranoja, University of Vaasa, Finland
ID 031: Simulating King Khalid University Outpatient Hospital Pharmacy Queuing System
Tariq Aziz, King Saud University, Saudi Arabia
Abderrezzak Hocine, Department of Electromechanical, Badji Mokhtar University, Annaba, Algeria
Ahm Shamsuzzoha, Yuqiuge Hao and Petri Helo, Department of Production, University of Vaasa, Finland
MMR Khan Khadem, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman
Li Zeng, Smriti Neogi, and Jamie Rogers, The University of Texas at Arlington, Arlington, USA
Susan Seidensticker, Carlos Clark, Lindsey Sonstein, Rick Trevino, and Gulshan Sharma, Department of Internal Medicine, The University of Texas Medical Branch, Galveston, USA
Aftab Alam and Meraj Salim, King Abdulaziz University, Saudi Arabia
ID 039: Recent Developments in the Field of Magnetic Refrigeration
Bakhodirzhon Siddikov, Ferris State University, Michigan, USA
ID 040: Stimulate Active Participation and Managing Change
Mohan Khond, College of Engineering, Pune, India
ID 041: Determining the Slack Capacity of Testers thru Model Simulation
Herwina Richelle C. Andres, Operations Research – Test Equipment Engineering, Analog Devices, Inc., Cavite, Philippines
Karl Hain, Christoph Rappl and Josef Süß, DIT – Deggendorf Institute of Technology, Deggendorf, Bavaria, Germany
Walter Steininger, Max Streicher GmbH & Co., Deggendorf, Germany
Reza Farrokhian and Faezeh Soleimani, Industrial Management Institute – North Branch, Amol, Iran
Yousef Gholipour-Kanani, Department of Management, Islamic Azad University – Qaemshahr Branch, Qaemshahr, Iran
Seyed Mehrdad Moghaddam Ziabari, Department of Management, Industrial Management Institute – North Branch, Amol, Iran
ID 044: Magnetic Field Assisted Machining
Farhad Najarian, M.Y. Noordin and D. Kurniawan, Universiti Teknologi Malaysia, Skudai, Malaysia
Armin Darmawan, Hasanuddin University, Makassar, Indonesia
Farizal and Dendi Prajadhiana, University of Indonesia, Depok, Indonesia
Rajab Abduallah, Tripoli University, Libya
Nabil Muhaisen, High Institute for Training, Libya
Reza Mesgarian National Iranian Gas Company (NIGC), Tehran, Iran
ID 049: Vulnerability as a Relevant Supply Chain Attribute for SCOR
Olufemi Adetunji, University of Pretoria, South Africa
ID 050: A Real-Time Planning and Scheduling Model in RFID-enabled Manufacturing
Ray Y. Zhong, and George. Q. Huang, The University of Hong Kong, Hong Kong, China
Q. Y. Dai, School of Information Engineering, Guangdong University of Technology, Guangzhou, China
T. Zhang, T.Y. Luo and D.P. Lin, Huaiji Dengyun Auto Parts (Holding) Co., Ltd. Zhaoqing, China
ID 051: Policy implications on industrial energy consumption: a DEA Sensitivity approach
Oludolapo A. Olanrewaju, Department of Industrial Engineering, Tshwane University of Technology, Pretoria, South Africa Adisa A. Jimoh, Department of Electrical Engineering Tshwane University of Technology, Pretoria, South Africa
Pulek A. Kholopane, Department of Industrial Engineering University of Johannesburg, South Africa
ID 053: Decision support system for Van-der-Waals forces actuated micro-material handling operations
Stephen Matope, and A.F. Van der Merwe, University of Stellenbosch, South Africa
Ronald Mariano, Colegio De San Juan De Letran, Philippines
Kizito Mubiru, Makerere University, Uganda
ID 057: Challenges and Uncertainties in Collaborative Forecasting
Madhavendra Saxena, Poornima University, India Chinmoyee S.Despande, USA
ID 059: The Survey of Role of Freight Forwarders in the Coordination Supply Chain
Ehsan Jamshidi Meyabadi and School of Business, Payam Noor University, Branch of Karaj, Iran Razieh Maleki, School of Business, Islamic Azad University, Branch of Kermanshah, Iran
ID 060: Use of Systems Engineering Tools and Concepts to Improve Chronic Disease Management
Gulshan Sharma, Carlos Clark and Lindsay Sonstein, Department of Internal Medicine, The University of Texas Medical Branch, Galveston, TX, USA
Rick Trevino, Department of Clinical Data Management, The University of Texas Medical Branch, Galveston, TX, USA Laura Grady, The University of Texas Medical Branch, Galveston, TX, USA
Susan Seidensticker, The University of Texas Medical Branch, Galveston, TX, USA
ID 061: Understanding Physician’s Decision Making in Trauma Centers
Policarpos deMattos, Eui Park, and Daniel Miller, North Carolina A&T State University, USA
ID 062: Development of a Graphical User Interface as Data Collection Tool for Cognitive Performance
Eui Park, North Carolina A&T State University, USA
ID 064: Study of Performance Measurement Practices in Supply Chain Management
Hamid Kazemkhanlou, and Hamid Reza Ahadi, Iran University of Science & Technology, Tehran, Iran
ID 065: A Framework for Evaluation of Renewable Energy Policies
Michael Mutingi, University of Botswana, Botswana Charles Mbohwa, University of Johannesburg, South Africa
ID 066: Alternative Fuels for Cement Industry: A Review
Rajendra Patil, Universal College of Engineering and Research Pune, India
ID 067: Home Healthcare Staff Scheduling: A Clustering Particle Swarm Optimization Approach
Michael Mutingi, University of Botswana
ID 068: Healthcare Staff Scheduling in a Fuzzy Environment: A Fuzzy Genetic Algorithm Approach
Michael Mutingi, University of Botswana
ID 069: System Reliability Optimization: A Fuzzy Genetic Algorithm Approach
Michael Mutingi, University of Botswana
Gary Y. Chen, and Zhong-Han Yu, Chung Yuan Christian University, Industrial & Systems Engineering, Chung Li, Taiwan Jamie Rogers, University of Texas – Arlington, Industrial & Mfg. Systems Engineering, Arlington, TX, USA
ID 071: Kronecker Models Versus Scheffé’s Mixture Models
Javier Cruz-Salgado, Sergio Alonso, and Roberto Zitzumbo, CIATEC, A.C., Guanajuato, México
Eldon Caldwell, University of Costa Rica
Oscar Gamboa, Technological Institute of Costa Rica
ID 075: Intermittent Demand Forecast: Robustness Assessment for Group Method of Data Handling
Prerna Mishra and Guangbin Huang, Nanyang Technological University, Singapore
Xue-Ming Yuan, and Truong Ton Hien Duc, Singapore Institute of Manufacturing Technology (SIMTech), Singapore
ID 076: The Art of Managing Production Disruptions in Pump Industry through Visual Management
Johannes Mapokgole, University of Johannesburg, South Africa
ID 077: Evaluating Performance of Production Scheduling from an Economic Perspective
Johannes Mapokgole, University of Johannesburg, South Africa
ID 079: The Wafer Breakages Reduction using Kaizen Approach
Abdul Talib Bon, Universiti Tun Hussein Onn Malaysia
ID 081: A Modified Failure Mode and Effect Analysis
Shahryar Sorooshian, Ahmad Nazif Bin Noor Kamar, and Ali Asghar Jomah Adham, University Malaysia Pahang, Malaysia
ID 082: An Evaluation Model for Tourism-Sport Dealer Selection
Shahryar Sorooshian, Ahmad Nazif Bin Noor Kamar, and Ali Asghar Jomah Adham, University Malaysia Pahang, Malaysia
ID 083: Supply Chain Security with IT Application
Shahryar Sorooshian, and Ahmad Nazif Bin Noor Kamar, Faculty of Technology, University Malaysia Pahang, Malaysia
ID 084: Quality of Work Life and Organizational Commitment
Nushin Kamali Sajjad and Badri Abbasi, Islamic Azad University, Astara, Iran
ID 085: Manufacturing and Fractional Cell Formation Using the New Binary Digit Grouping Algorithm
Mroue Hassan and Dao Thiên-My, École de Technologie Supérieure (University of Quebec), Montreal, Quebec Canada
Joshua Chan Ren Jie, Shahrul Kamaruddin, and Ishak Abd Azid, Universiti Sains Malaysia, Malaysia
ID 087: Nonlinear Mixed-Effects Models for Multiple Repairable Systems
Byeong Min Mun, and Suk Joo Bae, Hanyang University, South Korea
ID 088: Optimization of Box Type Girder of Overhead Crane for Different Spans with Fixed Capacity
Muhammad Abid and Shahbaz M. Khan, GIK Institute of Engineering Sciences and Technology, Topi, Swabi, Pakistan
ID 089: Customer Attrition in Retailing: An Application of Multivariate Adaptive Regression Splines
Vera Miguéis, Faculdade de Engenharia da Universidade do Porto, Portugal
James C. Chen, National Tsing-Hua University, Taiwan
Imam Baihaqi, Institute of Technology Sepuluh Nopember, Indonesia Nadia Aulia Arifin, National Tsing-Hua University, Taiwan
ID 092: Improving Agility in Distribution Operations
Bernardo Villarreal, Javier Arriaga, Ciro Cardenas, Juan Pablo Rivera, and Humberto Campos, Universidad de Monterrey, Mexico
ID 094: Critical Quality Factors and Financial Performance of the Libyan Construction Firms
Nawal Gharbal, Amrit Sagoo and Abdussalam Shibani, Coventry University, UK
ID 095: Project Management Performance Measures on Construction Project in Libya
Nawal Gherbal, and Amrit Sagoo, Coventry University, UK
Abdussalam Shibani, Coventry University, UK
Abdelhakim Abdelhadi, King Khalid University, Saudi Arabia
Ali Massaeli, National Iranian Gas Company, Iran
Alvin Ang, Systems and Engineering Management (SEM), Nanyang Technological University (NTU), Singapore
ID 100: Application of Reliability Centered Maintenance (RCM) in Electrical Power Plant
Hadi Abou-Chakra and Ramzi Fayad, Department of Industrial Engineering – Beirut Arab University, Lebanon
ID 101: Robust Power Supply Model for Hybrid Renewable Energy System under Parameter Uncertainty
Yi-Ling Tsai and Kuo-Hao Chang, National Tsing Hua University, Taiwan
ID 102: A New Variables Sampling System Based on Exact Sampling Distribution
Jhih-Jia Lin and Shih-Wen Liu, National Taiwan University of Science and Technology, Taiwan Chien-Wei Wu, National Tsing Hua University, Taiwan
Shih-Wen Liu, and Shi-Woei Lin, National Taiwan University of Science and Technology, Taipei, Taiwan Chien-Wei Wu, National Tsing Hua University, Hsinchu, Taiwan
ID 104: Integration of Multivariate Statistical Process Control and Engineering Process Control
Mohammed A. Rahim, University of New Brunswick, Fredericton, Canada
Yasir A. Siddiqui and Moustafa Elshafei, King Fahad University of Petroleum and Minerals, Dhahran, Saudi Arabia
Rajab Abduallah Hokoma, Tripoli University, Libya
ID 106: Optimal Sampling Strategy of Incoming Quality Control in In-Mold Decoration Manufacturing
Kataoka Hirohiko and Kuo-Hao Chang, Department of Industrial Engineering and Engineering Management, National Tsing Hua University, Taiwan
ID 107: Green Supply Chain Design with Multi-Objective Optimization
Kartina Puji Nurjanni, Postgraduate Program of Industrial Engineering, Universitas Gadjah Mada, Yogyakarta, Indonesia, Algoritmi Research Center, Department of Production and System, Universidade do Minho, Portugal
Maria S. Carvalho and Lino A.A.F da Costa, Department of Production and System, Universidade do Minho, Portugal Fauzun, Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada, Yogyakarta, Indonesia
ID 108: Quantile-Based Stochastic Optimization Using Modified Stochastic Nelder-Mead Simplex Method
Hou-Kuen Lu and Kuo-Hao Chang, National Tsing Hua University, Taiwan
Ernnie Illyani Basri, Universiti Sains Malaysia
ID 110: A Bi-Objective Model for Locating and Sizing Emergency Medical Service Stations
Nasrin Ramshe and Elahe Amiri, Department of Industrial Engineering, Amirkabir University of Technology, Tehran, Iran
Annamalai Pandian, University of Wisconsin – Stout, USA
Amirnaser Akhavan, Petroleum Dept, AmirKabir University of Technology, Iran Nooshin Jabbari, University of Malaya, Kuala Lumpour, Malaysia
M. Hamdi, Advanced Manufacturing and Material Processing (AMMP) Centre, University of Malaya, and Department of Engineering Design & Manufacture, Faculty of Engineering, University of Malaya
ID 113: Optimal Sampling Policy in Semiconductor Manufacturing
Ci-An Rong and Kuo-Hao Chang, Department of Industrial Engineering and Engineering Management, National Tsing Hua University, Taiwan
ID 115: Establishments of Predictive Maintenance Control Limits
Omar M Elmabrouk and Mariam Azraga, University of Benghazi, Faculty of Engg. Industrial and Manufacturing System Engineering Department, Benghazi Libya
ID 116: E-Development – Place of Citizen Rights
Md. Abdullah Al Noman, Dhaka University of Engineering & Technology (DUET), Gazipur, Bangladesh Khan Manjur Morshed, Director, Bangladesh Power Development Board (BPDB), Khulna, Bangladesh
Jui-Chu Chen, Hsiu-I Ting, National Kaohsiung First University of Science and Technology, Kaohsiung, Taiwan
Vincent F. Yu, Department of Industrial Management, National Taiwan University of Science and Technology, Taipei, Taiwan
ID 118: A Reference Model for Development of Production Scheduling Systems
Shigeru Fujimura, Graduate School of Information, Production and Systems, Waseda University, Fukuoka, Japan
D’Ariano Andrea, D’Ariano Paolo, Samà Marcella, and Pacciarelli Dario, Università degli Studi Roma Tre, Rome, Italy
ID 120: Assessment of Applying Chaos Theory for Daily Traffic Estimation
Abbas Mahmoudabadi, Payam-e-Noor University, Tehran, Iran
Saeed Andalibi, High Institute of Education and Research in Planning and Management, Tehran, Iran
ID 121: EFQM Constructive or Destructive the Business Excellent
Mohammad Eslamipour, Mapna Generator Co., Iran
ID 122: Material and Structural Investigation into a Novel Material
Messaoud Saidani, Faculty of Engineering and Computing, Coventry University, United Kingdom Abdussalam Shibani, Department of Civil Engineering, Coventry University, United Kingdom Sam George, Architecture and Building, Coventry University, United Kingdom
ID 123: Supply Chain Networks Reliability by Considering Dependencies between Elements of the Chain
Mohsen Babashahi, Iran University of Science and Technology, Iran
ID 124: Materialized Views Maintenance in the Mobile Environment
Sebaa Abderrazak, LIMED, Algeria Tari A/Kamel, Algeria
ID 125: ASEAN Industrial Engineering and Work Measurement Practices Phenomenon
Sze Yee Thong, Universiti Malaysia Perlis (UniMAP), Perlis, Malaysia
ID 127: Designing a New Particle Swarm Optimization for Make-with-Buy Inventory Model
Saeed Poormoaied, Georgia Institute of Technology, Atlanta, USA Mahsa Yavari, Ferdowsi University of Mashhad, Mashhad, Iran
ID 128: Early Warning System in Preventive Maintenance as a Solution to Reduce Maintenance Cost
Tiena Gustina Amran, and Leonardus Sujarto, Industrial Engineering Department, University of Trisakti, Jakarta, Indonesia
ID 129: Automatic Evaluations of the Results of Segmentation
Soraya Tighidet, University of Bejaia, Algeria
Aloui Abdelouhab, University A/Mira, Bejaia, Algeria
ID 132: Energy Source from Hydrogen Production via Methane Dry Reforming
Anis H. Fakeeha, Ahmed A. Ibrahim, Muhammad Awais Naeem and Ahmed S. Al–Fatesh, King Saud University, Saudi Arabia
Samira Keivanpour, Universite Laval, Canada
Christian Mascle, École Polytechnique de Montréal, Canada Daoud Ait Kadi, Université Laval, Canada
ID 135: Characteristics of Automotive Supply Chains-An Exploratory Study
Sanjay Jharkharia, Indian Institute of Management Kozhikode, India
ID 136: Multi-Objective Path Search Problem Based on an Extended Network Model
Yoichi Shimakawa, Salesian Polytechnic, Japan
Hiroki Osuna, Advanced Course in Production Systems Engineering, Salesian Polytechnic, Machida, Tokyo, Japan Yoichi Shimakawa, Department of Computer Science and Technology, Salesian Polytechnic, Machida, Tokyo, Japan Hiroyuki Goto, Department of Industrial & System Engineering, Hosei University, Koganei, Tokyo, Japan
ID 137: A Generic Model for Integrated Sales, Product, and Production Configuration
Linda L. Zhang, IESEG School of Management, France
Cheng-Hung Hu, Department of Industrial Engineering and Management, Yuan Ze University, Chung-Li, Taiwan
ID 139: Reducibility of Some Multi-criteria Scheduling Problems to Bi-criteria Scheduling Problems
Saheed Akande, Department of Mechanical and Mechatronics Engineering, Afe Babalola University, Ado-Ekiti. Nigeria Ayodeji. E. Oluleye, Department of Industrial and Production Engineering University of Ibadan, Ibadan, Nigeria
E.O. Oyetunji, Department of Mechanical Engineering, Lagos State University, Lagos, Nigeria
Salvatore Miranda, M. Fera, R. Iannone, and S. Riemma, University of Salerno, Fisciano, Italy
ID 142: The Joint Contract to Coordinate Price Changing Apparel Supply Chain
Qi Xu and Wenjie Wang, Donghua University, China
ID 143: Proactive R&D Project Scheduling with a Bi-Objective Genetic Algorithm
Gündüz Ulusoy, and Canan Capa, Sabanci University, Turkey
ID 144: The Application of Queuing Theory in Multi-Stage Production Line
Muhammad Marsudi, King Abdulaziz University, Saudi Arabia Hani Shafeek, Suez Canal University, Egypt
NurAmalina Muhammad, and Chin JengFeng, University Sains Malaysia
Nur Syazwani Abd Suki, and Shahrul Kamaruddin, School of Mechanical Engineering, Universiti Sains Malaysia Elmi Abu Bakar, School of Aerospace Engineering, Universiti Sains Malaysia, Penang, Malaysia
ID 150: Investigating the Role of Incentives in Improving Efficiency of Healthcare Systems
Abhijit Deshmukh and Brandon Pope, Purdue University, USA
ID 151: A Framework for the Development of Halal Food Products in Malaysia
Norizah Mohamad, Univesiti Sains Malaysia
ID 152: Market Adaptive Supply Chain Model of Global Automotive Players
Gwang Seok Kim, Dong Uk Jeon, Sun Hoon Kim, and Young Hoon Lee, Yonsei University, South Korea
Eizaburo Takegami and Takafumi Kawasaki, User Experience Research Department, Hitachi, Ltd., Tokyo, Japan
Hisako Okada, Global Innovation Project Management Department, Power Systems Company, Hitachi, Ltd., Ibaraki, Japan Masatoshi Takada, Nuclear Plant Department, Hitachi Works, Hitachi-GE Nuclear Energy, Ltd., Ibaraki, Japan
Kazuaki Yamagata, Power Plant Project Management Center, Hitachi ICC Co., Ibaraki, Japan
Hassan Hadipour, Azad University, Qazvin, Iran
Roozbeh Azizmohammadi and Abbas Mahmoudabadi, Payam-e-Noor University, Tehran, Iran Mohammad Khoshnoud, Farabi Institue of Higher Education, Karaj, Iran
Ferdous Sarwar, Md. Mamunur Rashid, and Debasish Ghosh, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
ID 156: Self-restrain or Discrimination: Participation of Women Engineers in India
Seema Singh, Department of Economics, Delhi Technological University, Delhi, India
ID 157: An Automated Workflow System Geared Towards Consumer Goods and Services Companies
Javier D. Fernandez, Department of Industrial Engineering, University Pontificia Bolivariana, Medellín, Antioquia, Colombia
Nurul Aida Harun, Universiti Sains Malaysia
ID 160: Application of Memetic Algorithm to Solve Truck and Trailer Routing Problems
Seyedmehdi Mirmohammadsadeghi and Shamsuddin Ahmed, University of Malaya, Kuala Lumpur, Malaysia
ID 161: Variables Multiple Dependent State Sampling Plans Based on Process Performance Index
Chien-Wei Wu, and Yen-Wen Chen, National Tsing Hua University, Taiwan
Pu-Tai Yang, Department of Business Administration, Tunghai University, Taichung, Taiwan Seokcheon Lee, School of Industrial Engineering, Purdue University, West Lafayette, IN, USA
ID 165: Benchmarking hospital services: an application of the Data Envelopment Analysis technique
Ana S. Camanho, and Isabel M. Horta, Faculdade de Engenharia da Universidade do Porto, Portugal Maria C. Portela, Universidade Católica Portuguesa, Porto, Portugal
ID 166: Inventory Management in Small and Medium-Sized Manufacturing Companies and Its Main Dilemmas
Denisa Ferenčíková, Tomas Bata University in Zlín, Czech Republic
Edilson Alves Rodrigues, University of São Paulo – USP, Brazil
José Antonio Carnevalli, Pontifical Catholic University of Campinas – PUCCAMP, Brazil Paulo Augusto Cauchick Miguel, Federal University of Santa Catarina – UFSC, Brazil
ID 168: Quality Management and Supply Chain Management Integration: A Conceptual Model Proposal
Ana Cristina Fernandes, Paulo Sampaio, Maria do Sameiro Carvalho, University of Minho, Braga, Portugal
ID 169: Comparison of Service Quality of Two Commercial Banks in Upper East Region of Ghana
E. O. Oyetunji, Department of Mechanical Engineering, Lagos State University, Nigeria
B. B. Baguri and A. E. Otis, Department of Computer Science University for Development Studies, Ghana
ID 170: Improving Operating Methods in a South African Foundry Company: A Case Study
Zanele Mpanza and Didier Nyembwe, University of Johannesburg, South Africa
ID 171: An Investigation of the Effects of Noise on Cognitive tasks
Farag Elfeituri, University of Benghazi, Libya
Jana Petru, Tomas Zlamal, Robert Cep, and Marek Pavlica, VSB-Technical University of Ostrava, Czech Republic
ID 175: A Study of Incentives and its Policies for Sustainability in Supply Chain
James C. Chen, National Tsing Hua University, Taiwan
Tien-Chi Shen, Chia-Ping Fun and Jason Wen-Hsien Chang, Industrial Technology Research Institute, Taiwan Tien-Yang Chang, Zih-Sian Lin and Yi-Jhen Lin, National Tsing Hua University, Taiwan
ID 176: The Marketing Mix Strategy in Influence to the Competitive Advantage
Endang Chumaidiyah, Faculty of Industrial Engineering, Institut Teknologi Telkom, Bandung, Indonesia
Stéphanie Desmeules and Denis Lagacé, Université du Québec à Trois-Rivières, Québec, Canada
ID 178: Optimal Lot Sizing and Setup Cost Reduction for Deteriorating Production System
Kuo-Lung Hou, Overseas Chinese University, Taichung, Taiwan
Li-Chiao Lin, National Chinyi University of Technology, Taichung, Taiwan
ID 178: Optimal Lot Sizing and Setup Cost Reduction for Deteriorating Production System
Kuo-Lung Hou, Overseas Chinese University, Taichung, Taiwan
Li-Chiao Lin, National Chinyi University of Technology, Taichung, Taiwan
Md. Masud Kaoser, Md. Mamunur Rashid and Sharif Ahmed, Department of Industrial and Production Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
Mehmet Savsar, Ameen Nadoom, Dalal Al-Muraished, Reem Ibrahim, and Meshari Al-Debasi, Kuwait University, Kuwait
ID 181: Industrial Maintenance Management – A Practical Approach
Hani Shafeek, Department of Industrial Engineering, King Abdulaziz University, Rabigh, Saudi Arabia
ID 182: Factory Master Planning at John Deere
Andrew Kiekhaefer, John Deere, USA
ID 183: Stochastic Optimization for Procurement of International Shipping Services
Sang Hwa Song, Graduate School of Logistics, Incheon National University, South Korea
Taesu Cheong, Department of Industrial and Systems Engineering, National University of Singapore, Singapore Byungjun Song, KTNET, South Korea
ID 185: Inventory Reduction by Applying Inventory Management Tools of a Selected Tannery FactoryMohammad Iqbal and Shibbir Ahmad, Shah Jalal University of Science and Technology, Sylhet, Bangladesh. AHM Shamsuzzoha, University of Vaasa, Finland
M. Roomi, Maxin Ercon Limited, Dhaka, Bangladesh
Yakubu Ibrahim, Peter Higgins and Peter Bruce, Swinburne University of Technology (SUT), Melbourne, Australia
ID 188: Some Comments on Discrete Sequential Search with Group Activities
Kris Coolen, Fabrice Talla Nobibon, and Roel Leus, KU Leuven, Belgium
Armin Darmawan, Department of Industrial Engineering, Hasanuddin University, Makassar, Indonesia
Farizal and Dendi Prajadhiana, Department of Industrial Engineering, University of Indonesia, Depok, Indonesia
ID 191: Expanding Knowledge of Students of Engineering Using E-Learning Support in Education
Markéta Gregušová, Ivana Šajdlerová, Martin Zuskáč, Jan Kedroň, and Jana Petrů, VŠB – Technical University of Ostrava, Czech Republic
Gyutai Kim and Suhee Jung, Chosun University, Kwangju, South Korea
ID 193: Developing a Total Quality Management Framework for the Healthcare Organizations
Abdulsattar Al-Ali, Department of Management, The World Islamic University for Sciences & Education, Amman, Jordan
ID 194: Centralizing Slow-Moving Items in a Retail Network – A Case Study
Shao Hung Goh and Boon Lian Lim, School of Business, Singapore Institute of Management (SIM) University, Singapore
ID 196: Submerged Geotextile Breakwater Construction Modeling
Amarjit Singh and Jerre Hansbrough, Department of Civil and Environmental Engineering, University of Hawaii at Manoa, Honolulu, HI, USA
Nasr Al Hinai, Mohammad Khadem, and Mahmoud Al Kindi, Sultan Qaboos University, Oman
Shradha Gawankar, National Institute of Industrial Engineering (NITIE), India
Amir Hossein Alavifar, BSTech Engineering Co. Yavari St., Resalat SQ, Tehran Iran Shadab Motamedi, UPM University, Serdang, Malaysia
Hasan Hosseini Nasab and Morteza Elahi, Faculty of Industrial Engineering, Yazd University, Iran Hamed Elahi, Faculty of Industrial Engineering, Sadjad Institute, Iran
ID 205: An Approach for Project Scheduling Using PERT/CPM and Petri Nets (PNs) Tools
Amer A. Boushaala, Dept. of Industrial and Manufacturing Systems Engineering, University of Benghazi, Libya
ID 206: E-shopping Success Dimensions – An Empirical Study in Kuwait
Kamel Rouibah, College of Business Administration, Kuwait
ID 208: Practical ABC intelligence solution for Quadratic Assignment
Golnar Behzadi and Balan Sundarakani, Faculty of Business and Management, University of Wollongong in Dubai, UAE
Mahmut Parlar, McMaster University, Canada
Brian Rodrigues, and Sharafali Moosa, Singapore Management University, Singapore
Doh Shu Ing, Faculty of Engineering and Green Technology, Universiti Tunku Abdul Rahman, Kampar, Malaysia
Minjae Park, College of Business Administration, Hongik University, Seoul, South Korea
Ki Mun Jung, Department of Informational Statistics, Kyungsung University, Busan, South Korea Dong Ho Park, Department of Information and Statistics, Hallym University, Chuncheon, South Korea
ID 218: Modeling of Radiative Heat Transfer of a real Gas in 2D Enclosure
Mohammed Cherifi, Siham Laouar-Meftah, and Abderrahmane Benbrik, University M’Hamed Bougara, Boumerdes, Algeria
ID 219: Time Interval for Collaborating Multi-Organizational Workflows
Bambang Jokonowo, and Riyanarto Sarno, Institut Teknologi Sepuluh Nopember, Indonesia
ID 221: A Framework on the Administrative Decision Model for Resource Loading
Rene Estember, Mapua Institute of Technology, Philippines
ID 222: Transforming Healthcare Using Systems Engineering in an Academic Health System
Victoria Jordan, University of Texas MD Anderson Cancer Center, USA
Rene Estember, Mapua Institute of Technology, Philippines
ID 224: The Effect of Inserted Idle Time on the Performance of Dispatching Rules in a Flow Shop
Ahmed El-Bouri, Sultan Qaboos University, Oman
ID 226: Sustainable Food Supply Networks in the Chinese Supermarket Sector
Christopher Backhouse and Chong Xu, Loughborough University, UK Norizah Mohamad, Univesiti Sains Malaysia
Reshpal Plaha, Crystal Quality UK Ltd, UK
ID 229: Productivity Analysis of a Flexible Manufacturing Cell
Mehmet Savsar, and Majid Aldaihani, Kuwait University, Kuwait
James C. Chen, National Tsing-Hua University, Taiwan
Chih-Cheng Chen, Yu-Yao Wei, Chin-Ping Liu, Chunghwa Picture Tubes Ltds, Taiwan Jim Z. Lin, National Tsing-Hua University, Taiwan
ID 232: Planning of Oil Distribution Network with Artificial Intelligence Techniques
B.S.M Borukgama, U.S.S. Dharmapriya and A.P. Senasinghe, University of Moratuwa, Moratuwa, Sri Lanka
A.K. Kulathunga, Department of Production Engineering, University of Peradeniya, Sri Lanka
ID 233: Response Surface Models for Optimization of Wheat Straw-Polypropylene Composite Formulations
Rois Fatoni, Universitas Muhammadiyah Surakarta, Indonesia
Ali ElKamel, and Leonardo Simon, University of Waterloo, Canada
ID 234: Advertisement about the Activities of Our Company
Azeez Adeniyi Olateju, Otaland Nig Ltd, Nigeria
Hendry Raharjo and Henrik Eriksson, Chalmers University of Technology, Gothenburg, Sweden
ID 236: Managing Upstream Supply Chain Complexity based on Purchasing Competencies: A Framework
Alhasan Y. Hakami, School of Aerospace, Mechanical & Manufacturing Engineering, RMIT University, Melbourne, Australia Linda L. Zhang, Department of Management, IESEG School Management, Lille, France
Arun Kumar, School of Aerospace, Mechanical & Manufacturing Engineering, RMIT University, Melbourne, Victoria, Australia
Docki Saraswati, Trisakti University, Indonesia
Andi Cakravastia, Bermawi P. Iskandar, and Abdul Hakim Halim, Bandung Institut Teknologi, Indonesia
ID 239: Recovery and Remanufacturing Targets versus Taxation\Subsidy Policies for Product Reuse
Sam Aflaki and Shumail Mazahir, HEC Paris, France
ID 240: Towards a Conceptual Model of Team-Based Innovation: Enablers and Obstacles of Innovation ProductivityTheresa-M. Myskovszky von Myrow, Susanne Mütze-Niewöhner and Sönke Duckwitz, Institute of Industrial Engineering and Ergonomics, RWTH Aachen University, Germany
Rois Fatoni, Universitas Muhammadiyah Surakarta, Indonesia
A. Elkamel, G. DeSouza, M. Ortiz, H. Park, and D. Wang, University of Waterloo, Ontario, Canada
ID 242: Inventory Analysis for a Manufacturing/Remanufacturing System under Product Substitution
Fethullah Gocer, and S. Sebnem Ahiska, Galatasaray University, Ortakoy, Istanbul, Turkey
ID 243: Modeling Biomass Gasification in a Fluidized Bed Reactor
R. Fatoni, Universitas Muhammadiyah Surakarta, Indonesia
S. Gajjar, S. Gupta, S. Handa, and A. Elkamel, University of Waterloo, Ontario, Canada
ID 245: Designing the Milk Collection Network using Integrated Location Routing Approach
Mohammad Mumtaz, Naiman Jalil and Kamran Ali Chatha, LUMS, Pakistan
Mohammad Kamran Mumtaz, Center for Entrepreneurial Development, Institute of Business Administration (IBA), Karachi, Pakistan & Suleman Dawood School of Business, Lahore University of Management Sciences (LUMS), DHA, Lahore, Pakistan
Muhammad Naiman Jalil and Kamran Ali Chatha, Suleman Dawood School of Business, Lahore University of Management Sciences (LUMS), DHA, Lahore, Pakistan
ID 246: A Technical Note on the Single-Vendor Multi-Buyer Integrated Inventory Supply Chain Problem
Md Abdul Hoque, University Brunei Darussalam
Teh Sin Yin, Michael Boon Chong Khoo, and Ker Hsin Ong, Universiti Sains Malaysia Wei Lin Teoh, Universiti Tunku Abdul Rahman, Perak, Malaysia
Khibtiyah Ilyas, Azurah A.Samah, and Hairudin Abdul Majid, University Technology Malaysia, Johor, Malaysia
ID 249: Simulation Modeling and Analysis for Stitching Line of Footwear Industry
James C. Chen, National Tsing Hua University, Taiwan
Aryka Pradhana Putra and Nikita Anggono, National Taiwan University of Science and Technology, Taiwan Jeff. Chen, IET, Pou Chen International Group, Taoyuan, Taiwan
Yung-Sheng Su, National Tsing Hua University, Taiwan
Lau Kee Wah, Azurah A Samah, and Hairudin Abdul Majid, University of Technology Malaysia
ID 253: Optimization Model for the Integration of Biomass into a Conventional Oil Refinery
I. Alhajri, College of Technological Studies, Kuwait
E. Alper and G.Is, Hacettepe University, Ankara, Turkey
J. Fung, J. Lo, K. Yanez, and Ali Elkamel, University of Waterloo, Canada Ibrahim Alhajri, College of Technological Studies, Kuwait
I. Z. Al-Syed, A. Jetly, J. Tordiff, and A. Elkamel, University of Waterloo, Ontario, Canada
ID 254: Optimization Model for the Integration of Nuclear Energy in Oil Sand Operations
M. Elsholkami, A. Elkamel, I. Al-Syed, A. Jetly, and J. Tordiff, University of Waterloo, Canada
I. Alhajri, College of Technological Studies, Kuwait
ID 255: Electricity Generation under Multiple Pollutant Consideration
I. Alhajri, College of Technological Studies, Kuwait
M. Elsholkami, S. Giovinazzo, R. D’Souza, E. Kim, and A. Elkamel, University of Waterloo, Canada
ID 256: A Hybrid Heuristic for Inventory Routing Problem with Stochastic Demand
Anak Agung Ngurah Perwira Redi, Meilinda F.N. Maghfiroh and Vincent F. Yu, Department of Industrial Management, National Taiwan University of Science and Technology, Taipei, Taiwan
ID 257: Development of Steam Management Technologies for the Oil Sands Industry
M. Elsholkami, S. Shankar, M. Walawalkar, M. Mehta, A. Merchant, and A. Elkamel, University of Waterloo, Canada
I. Alhajri, College of Technological Studies, Kuwait
ID 258: An Efficient Heuristic Approach for Solving the Transportation Problem
Mohamed Silmi Juman Zeinul Abdeen, University Brunei Darussalam, Brunei
ID 260: Integrating a Cogeneration System in Food Process Manufacturing
Wongphaka Wongrat, Faculty of Engineering, Kasetsart University, Kamphaeng Saen Campus, Thailand
O. Yuksel Orhan and E. Alper, Hacettepe University, Ankara, Turkey
J. Massicotte, D. Meyer, Y. Sung, and A. Elkamel, University of Waterloo, West Waterloo, ON N2L 3G1, Canada
ID 261: Modeling Fouling Mitigation Options for Cellulosic Ethanol Distillation
Wongphaka Wongrat, Faculty of Engineering, Kasetsart University, Kamphaeng Saen Campus, Thailand
M. Northey, K. Ali, A. Garusinghe, and A. Elkamel, University of Waterloo, Ontario, Canada
ID 262: Genetic Algorithm Approach for Multi-objective Green Supply Chain Design
Li-Chih Wang1,2, Ming-Chung Tan1, I-Fan Chiang1, Yin-Yann Chen3, Sheng-Chieh Lin1, and Shuo-Tsung Chen1 1 Department of Industrial Engineering and Enterprise information Tunghai University Taichung, Taiwan, ROC
2Tunghai Green Energy development and management Institute (TGEI) Tunghai University Taichung, Taiwan, ROC
3 Department of Industrial Management National Formosa University Yunlin County, 632, Taiwan, ROC.
ID 263: Parameter-based Preemptive Objective Optimization for Solar Cell Manufacturing
Li-Chih Wang 1,3 Yu-Jie Wong1,Tzu-Li Chen2, Shuo-Tsung Chen3, Cheng-Mei Li1
1Department of Industrial Engineering and Enterprise information, Tunghai University, Taichung, Taiwan
2Department of Information Management, Fu Jen Catholic University, New Taipei City, Taiwan
3Tunghai Green Energy Development and Management Institute (TGEI), Tunghai University, Taichung, Taiwan
ID 264: Implementation of Safety Instrumented Systems by Fuzzy Risk Graph
Nouara Ouazraoui, Bilal Rabah, Rachid Nait-Said, and Mouloud Bourareche, Laboratory of Research in Industrial Prevention (LRIP), Health and Occupational Safety Institute, University of Batna, Algeria
ID 265: Simulation Modeling and Analysis of Line Length and Batch Size in Footwear Factory
James C. Chen, National Tsing Hua University, Taiwan
Nikita Anggono and Aryka Pradhana Putra, National Taiwan University of Science and Technology, Taiwan River Chou, IET, Pou Chen International Group, Taoyuan, Taiwan
Erik S. Chang, National Tsing Hua University, Taiwan
ID 266: The Performance of Eggshell as Filler in Concrete Mixtures
Doh Shu Ing, Faculty of Engineering and Green Technology, Universiti Tunku Abdul Rahman, Kampar, Malaysia
Saeed Salimi Beni, National Iranian Gas Company, Tehran, Iran
James C. Chen, National Tsing-Hua University, Taiwan Ana M. Chiu, National Tsing-Hua University, Taiwan
Md. Atikul Islam, Khulna University of Engineering & Technology (KUET), Bangladesh
ID 270: Case Study: Innovative Implementation of Several Lean Principles in a Flat Steel Plant
Sameh M. Fahmi, Tamer M. Abdelwahab, Yaseen Amin, Mohamed S. Emam, Haytham Youssef and Ahmed Ragab, Al Ezz Dekheila Steel Co. (EZDK), Alexandria, Egypt
ID 271: Cellular Manufacturing through Composite Part Formation: A Genetic Algorithm Approach
Nirjhar Roy and V.R. Komma, Motilal Nehru National Institute of Technology, Allahabad (U.P.), India
Akhmad Hidayatno, Irvanu Rahman, and Ricki Muliadi, University of Indonesia, Jakarta, Indonesia
ID 273: Assembly Line Balancing Problem of Sewing Lines in Garment Industry
James C. Chen, National Tsing Hua University, Hsinchu, Taiwan
Chun-Chieh Chen, Chung Yuan Christian University, Chung Li, Taiwan
Yi-Jhen Lin, Chun-Ju Lin, and Tiffany Y. Chen, National Tsing Hua University, Hsinchu, Taiwan
ID 274: Facing Ramp-Up Challenges in the RoboCup Logistics League
Sebastian Reuter, Daniel Ewert, and Sabina Jeschke, RWTH Aachen University, Dennewartstraße, Aachen, Germany
ID 275: Batch Scheduling for a Single Deteriorating Machine to Minimize Total Actual Flow Time
Rinto Yusriski, Bandung Institute of Technology, Indonesia
ID 277: Improving Decision Making within Production Control
Christina Thomas, Laboratory for Machine Tools and Production Engineering (WZL) of RWTH Aachen University, Germany
ID 278: The Supply Chain Design in Japan’s Auto Industry
Yong Yin, Yamagata University, Kojirakawa-machi, Yamagata-shi, Japan
ChenGuang Liu, Institute for Manufacturing, University of Cambridge, Cambridge, United Kingdom Ikou Kaku, Faculty of Environmental and Information studies, Tokyo City University, Japan
ID 279: Designing a Variables Two-Plan Sampling System with Process Loss Consideration
Nani Kurniati, Department of Industrial Management, National Taiwan University of Science and Technology, Taipei, Taiwan
Chien-Wei Wu, Dept. of Industrial Engineering and Engineering Management, National Tsing Hua University, Hsinchu, Taiwan
Ruey-Huei Yeh, Department of Industrial Management, National Taiwan University of Science and Technology, Taipei, Taiwan
Sunil Sharma and Anuradha R Chetiya, University of Delhi, India
ID 283: Electricity Generation Schemes in Java-Bali Power System with Co2 Reduction Considerations
Farizal and Wenty Eka Septia, University of Indonesia, Depok, West Java, Indonesia
ID 285: Supply Chain Network Design with Preferential Tariff under Economic Partnership Agreement
Kenichi Funaki, and Junko Hosoda, Yokohama Research Laboratory, Hitachi Ltd., Yokohama, Kanagawa, Japan
ID 286: Possibilities of using Computer Simulation in Production Process
Michal Pivnička and Denisa Ferenčíková, Tomas Bata University in Zlín, Zlín, Czech Republic
Hossein Beheshti Fakher, Laval University Quebec Canada Mustapha Nourelfath, Kuwait University, Safat, Kuwait Michel Gendreau, École Polytechnique of Montreal, Canada
ID 288: MIP-based Models vs. Heuristics Algorithms for Solving Dynamic Network Flow Problems
Mojahid Saeed Osman, King Fahd University of Petroleum & Minerals, Saudi Arabia Bala Ram, North Carolina A&T State University, USA
Mohamed Ismail Wahab, Ryerson University, Canada
ID 289: The Resource-Constrained Project Scheduling Problem with Stochastic Activity Durations
Stefan Creemers, IESEG School of Management, Lille, France
ID 290: Risk-Averse Newsboy Problem with Incomplete Demand Information
Bibhas Giri, Department of Mathematics, Jadavpur University, Kolkata, India
Mustapha Nourelfath, Kuwait University, Safat, Kuwait Yuvraj Gajpal, University of Manitoba, Canada
Eida Nadirah Roslin, University of Malaya, Kuala Lumpur, Malaysia
Akhmad Hidayatno, Armand Omar Moeis, and Rama Raditya, University of Indonesia, Depok, Indonesia
ID 294: A Comparative Analysis of Methanol Production Routes: Synthesis Gas versus Co2 Hydrogenation
Camila Ribeiro, UFRJ – Federal University of Rio de Janeiro, Brazil
ID 295: Benchmarking C2C Performance Approach for Supply Chains: A Colombian Case Study
Juan Pablo Escorcia, Department of Industrial Engineering, Universidad Autonoma Del Caribe, Barranquilla, Colombia Rene A. Amaya, Department of Industrial Engineering, Universidad Del Norte, Barranquilla, Colombia
ID 296: A Kinetikk Study: Understanding Hand and Finger Motion Whilst Squeezing Bottles
Seri Rahayu Kamat, Department of Manufacturing Management, University Technical Malaysia Malacca Alaster Yoxall, Sheffield Hallam University, Sheffield, United Kingdom
ID 297: Monopoly Sponsored Entry in the Face of Demand Uncertainty and Constrained Capacity
Farooq Sheikh, State University of New York (SUNY), Geneseo, USA
Riza Auliya Rahman, Budi Santosa, and Stefanus Eko Wiratno, Sepuluh Nopember Institute of Technology, Surabaya, Indonesia
Budi Santosa and Ainur Rofiq, Surabaya Institute of Technology, Indonesia
Budi Santosa and Rita Damayanti, Surabaya Institute of Technology, Indonesia
Seri Rahayu K., Norhidayah Hashim and Shahrizan M.O., Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia, Melaka, Malaysia
Nurhayati Mohd Nur, Siti Zawiah Md Dawal and Mahidzal Dahari, University of Malaya, Kuala Lumpur, Malaysia
ID 306: An Exact Solution for a Class of Green Vehicle Routing Problem
Mandy Taha, M. Nashat Fors, and Amin Ahmed Shoukry, University of Alexandria, Egypt
ID 307: Investigating Supply Chain Risk Factors: An Empirical Assessment Approach
Lhoussaine Ouabouch, Ibnou Zohr University, Morocco
ID 309: Achieving Efficient Remanufacturing through Product-Service Systems
Erik Sundin, Linköping University, Sweden
ID 310: Modeling an Ergonomic Driving for In-Car Interaction: A Propose Framework
Nurulhuda Ahmad, Seri Rahayu Kamat, Mohamad Minhat, and Ahmad Yusairi Bani Hashim dan Isa Halim, Universiti Teknikal Malaysia Melaka (UTeM), Malaysia
Chaimongkol Limpianchob, and Kamphaeng Saen, Kasetsart University, Nakhonpathom, Thailand
ID 314: Gasification of Oil Refinery Waste for Power and Hydrogen Production
O. Yuksel Orhan, and E. Alper, Hacettepe University, Ankara, Turkey
K. McApline, S. Daly, M. Sycz, and A. Elkamel, University of Waterloo, Waterloo, Ontario, Canada
ID 315: Optimal Design of T2 Multivariate Statistical Chart for Process Monitoring
M. A. Bin Shams, Department of Chemical Engineering, University of Bahrain, , Isa Town, Kingdom of Bahrain
O. Yuksel Orhan and E. Alper, Chemical Engineering Department, Hacettepe University, Ankara, Turkey
K. Moorthy, J. Rafinejad, A. Saxena, and A. Elkamel, University of Waterloo, Waterloo, Ontario, Canada
S.M. Tofayel Ahmad, Bangladesh Bank, Dhaka, Bangladesh
Md. Abdur Rashid and Md. Kamrul Hasan, National Academy for Planning and Development (NAPD), Dhaka, Bangladesh
Patthira Phon-ngam, Loei Rajabhat University, Thailand
ID 318: Prediction Model for Speedy Customer’s Category at Pt Telekomunikasi Indonesia, Tbk.
Judi Alhilman and Mochamad Rian M., Telkom University, Bandung, Indonesia
ID 320: Aramco Riyadh Refinery Lean Six Sigma Projects, Case Study
Abdullah Dhafer, Aramco, Saudi Arabia
M. Farid Sies, M. Faris Sies, Hanis Zakaria, Norrizal Mustaffa, B. Manshoor, and N. Asmuin, Centre for Energy and Industrial Environment Studies (CEIES), Universiti Tun Hussein Onn Malaysia, Johor, Malaysia
ID 323: Reviewing the Validation of the MBNQA Model
Hongyi Sun, Department of Systems Engineering and Engineering Management, City University of Hong Kong, China
Ana S. Camanho, Faculdade de Engenharia da Universidade do Porto, Portugal
Manuela M. Oliveira, and Miguel B. Gaspar, Instituto Português do Mar e da Atmosfera I.P., Portugal
Francisco Santos Sabbadini, Department of Industrial Engineering, University of State of Rio de Janeiro, Brazil Mário Jorge Ferreira de Oliveira, Department of Production Engineering, University of State of Rio de Janeiro, Brazil Antonio Augusto Gonçalves, Business School, Estácio de Sá University, Rio de Janeiro, Brazil
Antonio H. A. Junior, José G. M. Barros Ali and Rosinei Batista, University of State of Rio de Janeiro, Brazil
Raed EL-Khalil, School of Business, Lebanese American University, Beirut, Lebanon
Parinya Pattanawasanporn, Kamphaeng Saen Kasetsart University Kamphaeng Saen Campus, Thailand
ID 329: Project Timor: A study to the industrial development of East Timor
Mário Cabral, Universidade Nacional de Timor Lorosa’e, Timor-Leste, East Timor Filipa Vieira, University of Minho/CGIT, Portugal
Cristina S. Rodrigues, University of Minho/ Centre Algoritmi, Portugal
ID 330: Project Empreede TIMOR. How to promote entrepreneurship among students?
Tomas Xavier, National University of East Timor Filipa Vieira, University of Minho/CGIT, Portugal
Cristina S. Rodrigues, University of Minho/ Centre Algoritmi, Portugal
ID 332: Novel Framework for Sustainability Based On Hybrid Architecture-Green Management
Shahryar Sorooshian and Ahmad Nazif Bin Noor Kamar, Faculty of Technology, University Malaysia Pahang, Malaysia Siavash Rashidi Sharif Abad, Department of Art and Architecture, Islamic Azad University, Rafsanjan, Iran
ID 335: Data Mining on Return Items in a Reverse Supply Chain
Lida Mohammadi, Iraj Mahdavi, and Ali Tajdin, Mazandaran University of Science and Technology, Babol, Iran
Hamed Fazlollahtabar, Iran University of Science and Technology, Tehran, Iran / Niroogostar Energy Optimization Research Group, Tehran, Iran
ID 336: A Mathematical Model for Waste Management in Reverse Supply Chain
Zahra Hosseini and Iraj Mahdavi, Mazandaran University of Science and Technology, Babol, Iran
Hamed Fazlollahtabar, Iran University of Science and Technology, Tehran, Iran, Niroogostar Energy Optimization Research Group, Tehran, Iran
ID 337: The impact of SCM on Business Performance: A Case Study in Tehran Stock Exchange Market
Ali Tajdin, Saba Shabaninikoo, Raj Mahdavi, and IHamed Fazlollahtabar, Mazandaran University of Science and Tech., Iran
ID 339: Abondoned Development as a Brownfield Site: Case Study Kemayan City, Johor Bahru
Nurlaila Ali, Land Administration and Development, Malaysia Khadijah Hussin, and Ismail Ashmat, University Technology Malaysia Kamalludin Bilal, Universiti Tun Hussein Onn Malaysia
ID 340: A Review on Criteria for Green Infrastructure to be adopted by Local Authorities
Kamalludin Bilal, Universiti Tun Hussein Onn Malaysia
Hishammudin Mohd Ali, and Ibrahim Atan Sipan, University Technology Malaysia Nurlaila Ali, Land Administration and Development, Malaysia
ID 341: Managing Multiple Outsourcing: Service Quality and Volume Issues
Samar Mukhopadhyay, Sungkyunkwan University-GSB, South Korea
ID 343: A Predictive Model of the Severity of Musculoskeletal Disorders among Poultry Layer Workers
Ma. Janice Gumasing, and Leslie Ann Francisco, Mapua Institute of Technology, Philippines
Ma. Janice J. Gumasing, Mapua Institute of Technology, Intramuros, Manila, Philippines
ID 345: Evaluating Supply Chain Performance and Risks through Data Mining
Muhammad Rashid, CESET – Centre for Emerging Sciences, Engineering & Technology, Pakistan
Muhammad Rashid, CESET – Centre for Emerging Sciences, Engineering & Technology, Pakistan
ID 347: Intranet, A New Approach Communication: Green Banking Aspects in Bangladesh Bank
S. M. Tofayel Ahmad, Mohammad Rahat Uddin, Munira Jahan, and Ayasha Noor, Bangladesh Bank, Dhaka, Bangladesh
Prakash Kalla, S K Rajasthan Agricultural University, India
Muhammad Rusman and Syamsul Bahri, Department of Industrial Engineering, Hasanuddin University, Makassar, Indonesia Yoshiaki Shimizu, Department of Mechanical Engineering, Toyohashi University of Technology, Japan
Slamet Pranoto and Rahmat Nurcahyo, Department of Industrial Engineering, University of Indonesia, Jakarta, Indonesia
ID 352: Job Shop Lean Production Implementation Using Program Evaluation and Review Technique (Pert)
Ramiz Assaf, Industrial Engineering Department, An-Najah National University, Nablus, Palestine
ID 353: An Alternative Heuristics for Bin Packing Problem
Nurul Afza Hashim, Faridah Zulkipli, Siti Sarah Januri, and S. Sarifah Radiah Shariff, Universiti Teknologi MARA, Malaysia
Milad Ziaeian, Reza Kiani Mavi and Gohar Rahmani, Islamic Azad University, Qazvin Branch, Qazvi, Iran
ID 356: Fuzzy Data Envelopment Analysis to Rank Engineering Design Requirements in QFD
Mohammad Molani Aghdam, Islamic Azad University, Ayatollah Amoli Branch, Amol, Iran
ID 357: Investigation on Service Supply Chain in Private Hospitals Malaysia
Suhaiza Zailani, Universiti Malaya, Kuala Lumpur, Malaysia
ID 358: Evaluation of Pliers in a Maximum Gripping Task
Hyun-Sung Kang,Ji-Su Kim, Dae-Min Kim, and Yong-Ku Kong, Sungkyunkwan University, Suwon, South Korea Myung-Chul Jung, Department of Industrial Engineering, Ajou University, Suwon, South Korea
ID 359: Process Performance Evaluation for Non-normal Distributions
Yan-Hung Lee, and Jhih-Jia Lin, National Taiwan University of Science and Technology, Taipei, Taiwan Chien-Wei Wu, National Tsing Hua University, Hsinchu, Taiwan
ID 360: A Survey on Interaction Techniques in Virtual Environments
Jaemoon Jung, Hanjun Park, Dongwook Hwang, Minseok Son, Donghyun Beck, Juhee Park, and Woojin Park, Department of Industrial Engineering, Seoul National University, Seoul, South Korea
ID 361: Implementation Model and Roadmap of Manufacturing Process Standardization
Kwai Sang Chin, City University of Hong Kong
Hui-Chuan Chen and Yan-Hung Lee, National Taiwan University of Science and Technology, Taiwan Chien-Wei Wu, National Tsing Hua University, Taiwan
Dae-Min Kim, Hyun-Sung Kang, Ji-Su Kim, and Yong-Ku Kong, Sungkyunkwan University, Suwon, South Korea Myung-Chul Jung, Department of Industrial Engineering, Ajou University, Suwon, South Korea
ID 365: Location-Routing-Inventory Problem with Transshipment
Haliza Ahmad, Pa’ezah Hamzah, Zaitul Anna Melisa Md Yasin and S. Sarifah Radiah Shariff, Centre for Statistical and Decision Science Studies, Faculty of Computer and Mathematical Sciences, Universiti Teknologi MARA, Malaysia
Erim Kardes, Department of Industrial Engineering, Ozyegin University, Istanbul, Turkey
ID 368: Mathematical Programming based Synthesis of Rice Drying Processes
Wongphaka Wongrat, Kasetsart University, Kamphaeng Saen Campus, Thailand
A. Elkamel, P. L. Douglas, and A. Younes, University of Waterloo, Canada
Shintaro Urabe and Masaru Tezuka, Hitachi Solutions East Japan, Ltd., Japan
ID 370: Contactless Smart Card Based Prepaid Gas Metering System
Md. Liakot Ali, Mohammad Imam Hasan Bin Asad and Md. Saiful Islam, Institute of Information and Communication Technology, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
ID 371: A Study on Under Graduate Students’ Internet Usage and Habits
Murat Durucu, Istanbul Technical University, Turkey
Selcuk Cebi, and Behice Meltem Kahyan, Karadeniz Technical University, Turkey
ID 373: Voltage Sag Assessment by Considering Financial Losses and Equipment Sensitivity
Chang-Hyun Park, Pukyong National University, Busan, South Korea
Atiah Abdullah Sidek, International Islamic University Malaysia
Jong-Jang Lin, Yi-Kuei Lin and Ruey-Huei Yeh, National Taiwan University of Science and Technology, Taipei, Taiwan
Khristian Edi Nugroho Soebandrija, Bina Nusantara University, Indonesia
Fourry Handoko, National Institute of Technology, ITN Malang, East Java, Indonesia
Mohammad Molani Aghdam, Department of Engineering, Islamic Azad University, Ayatollah Amoli Branch, Amol, Iran
ID 379: Implementation of Statistical Process Control in the Food Industry: A Systematic Review
Sarina Abdul Halim Lim, and Jiju Antony, University of Strathclyde, UK
Khristian Edi Nugroho Soebandrija, Bina Nusantara University, Indonesia
Khalida Al Hakmani, Oman Gas Company, Muscat, Oman Hamdi Bashir, University of Sharjah, United Arab Emirates
ID 382: Religiosity and Customer Satisfaction in Public Sector of Pakistan: An Empirical StudyMuhammad Muzammil Tanveer, National University of Sciences & Technology, Islamabad, Pakistan Rida Khurshid, Fatima Jinnah Women University, Rawalpindi, Pakistan
Mehdi Sajadifar and Ahmad Mavaji, University of Science and Culture, Poonak, Tehran, Iran
Michelle Cheong, Singapore Management University, Singapore
Ketut Gita Ayu, Nike Septivani, and Verola Lollyta, Bina Nusantara University, Jakarta, Indonesia
Yuzainee Md Yusoff, Universiti Tenaga Nasional, Malaysia
ID 389: An Analysis of Predictor Variables for Operational Excellence through Six Sigma
Anuradha R Chetiya, and Sunil Sharma, University of Delhi, India
ID 390: The Influence of OSH Management System on Firm Competitive Advantage
Noorliza Karia, Universiti Sains Malaysia, Penang, Malaysia
ID 391: Investigation of the Performance Characteristics of a Rotary Electronic Tablet Counter
Adekunle Jinadu, BCN PLC, Lagos, Nigeria
ID 392: Framework to Implement Six Sigma Methodology to Oil and Gas Drilling Budget Estimation.
Mahmood Al Kindi and Mujtaba Al Lawati, Sultan Qaboos University, Muscat, Oman
ID 394: On Sustainability of it Service Business in India: A Financial Operation Perspective
Jagadish Kundu, Cognizant, India
ID 395: Wind Energy Analysis for 3 Prospective Costal Sites of Bangladesh
Muhammad Mahbubul Alam, Bangladesh University of Engineering & Technology (BUET), Dhaka, Bangladesh
A. K. Azad, Sylhet Gas Field Limited, Sylhet, Bangladesh
Khaled N. El-Hashmi and Omar K. Gnieber, University of Benghazi, Benghazi, Libya
Mohammadreza Joulaie, National Iranian Oil Company, Iran
ID 401: How can We Develop a Risk Management Plan for Our Organization?
Rujee Charupash, Sirindhron College of Public Health KhonKaen, Thailand
Rohaizan Ramlan, Kamilah Ahmad, and Siti Anisah Atan, Universiti Tun Hussein Onn Malaysia
ID 403: Unrelated Parallel Machines Scheduling Problem with Sequence Dependent Setup Times
Vahid Kayvanfar, Amirkabir University of Technology, Iran
Syed Quddus and A. Bhagirov, The University of Ballarat, The University of Technology Papua New Guinea
ID 405: Conceptual Modelling on Economic Sustainability of Computer Part Recovery Systems
Roesfiansjah Rasjidin1,2, Arun Kumar1 and Firoz Alam1
1 School of Aerospace, Mechanical & Manufacturing Engineering, RMIT University, Melbourne, Australia
2 Industrial Engineering Department, Faculty of Engineering, Esa Unggul University, Jakarta, Indonesia
ID 406: Exploring Maintenance Management in Service Sector: A Case Study
Noorliza Karia, School of Management, Universiti Sains Malaysia, Penang, Malaysia
Muhammad Hasmi Abu Hassan Asaari, School of Distance Education, Universiti Sains Malaysia, Penang, Malaysia Hayati Saleh, School of Housing, Building and Planning, Universiti Sains Malaysia, Penang, Malaysia
ID 407: Analysis of Different Criteria for Workload Balancing on Identical Parallel Machines
Ouazene Yassine, Yalaoui Farouk, Chahade Hicham, and Yalaoui Alice, Université de Technologie de Troyes, France
ID 408: Modeling and Optimization of WEDM Parameters for Surface Finish Using Design of Experiments
I.K. Chopde, Visvesvaraya National Institute of Technology, India Chandrashekhar Gogte, Marathwada Institute of Technology, Aurangabad, India Dhobe Milind, P.E.S. College of Engineering, Aurangabad, India
ID 410: The Effects of Salvage Value on the Age-Replacement Policy under Renewing Warranty
Yu-Hung Chien, Department of Applied Statistics, National Taichung University of Science and Technology, Taichung, Taiwan Fu-Min Chang, Department of Finance, Chaoyang University of Technology, Taichung, Taiwan
Tzu-Hsin Liu, Department of Statistics and Informatics Science, Providence University, Taichung, Taiwan
Subodha Dharmapriya, Asela Kulathunga and Pradeep Jayathilake, University of Moratuwa, Sri Lanka
ID 412: Tendencies in Education on Optical Design in Europe
Irina Livshits, Marina Letunovskaya, Ilya Mimorov and Vladimir Vasilyev, National Research University of Informational Technologies, Mechanics and optics, Russia
Paul Urbach, Optics Research Group, Delft University of Technology, The Netherlands
ID 413: New Methods for Course Development and Management in Engineering Education
Peter Toth, Trefort Agoston Centre for Engineering Education. Obuda University, Hungary Imre J. Rudas, Obuda University, Hungary
ID 414: Die Preparation Time Reduction Optimization of Automotive Stamping Operations
Nirav Sheth, Abass Enzi, Parth Patel, Don Reimer and Ahad Ali, Lawrence Technological University, USA
ID 416: Real Time Process Compliance Checking using Nomenclature Approach
Murphy Choy, Ma Nang Laik and Koo Ping Shung, Singapore Management University, Singapore
Hermie M. del Pilar, Department of Civil Engineering, Malayan Colleges Laguna, Cabuyao Laguna, Philippines
Rachel C. Villanueva, Ivan Jesrael Nagpala, Christian Garcia, and Mark Joseph Pablo, Department of Industrial Engineering, Malayan Colleges Laguna, Cabuyao Laguna, Philippines
Cheng-Hwai Liou, National Taichung University of Science and Technology, Taiwan Chia-Hui Yeh, Moore Stephens Certified Public Accountants, Taichung, Taiwan
Sasadhar Bera, Indian Institute of Management Ranchi, India Indrajit Mukherjeeb, Indian Institute of Technology Bombay, India
ID 421: Comparative Analysis of Supply Chain Management for Universities through ITESCM Model
A.K. Mahbubul Hye, Bishwajit Banik Pathik, Mahmud Habib Zaman, and Md. Mamun Habib, American International University- Bangladesh (AIUB), Dhaka, Bangladesh
ID 423: Digital Human Modeling and Clothing Virtual Try-on
Yueh-Ling Lin and Mao-Jiun J. Wang, National Tsing Hua University, Hsinchu, Taiwan
ID 424: TUT Student Bus Transport System: A Case Study
Venessa Ranjit, Tshwane University of Technology, South Africa
Oscar Vasquez Bernal, National Distance Open University (UNAD), Bogotá, Colombia
Walid Abdul-Kader, University of Windsor, Canada
ID 427: Multi-Server System with Multi-Threshold Service Policy
Fu-Min Chang, Department of Finance, Chaoyang University of Technology, Taichung, Taiwan
Jau-Chuan Ke, Department of Applied Statistics, National Taichung University of Science and Technology, Taichung, Taiwan Cheng-Hwai Liou, National Taichung University of Science and Technology, Taichung, Taiwan
Raja Zuraidah Raja Mohd Rasi, Universiti Tun Hussein Onn Malaysia, Jrhor, Malaysia
ID 429: Planning of Oil Distribution Network with Artificial Intelligence Techniques
Malinga Borukgama, Subodha Dharmapriya, Asiri Senasinghe and Asela Kulathunga, Sri Lanka
Hiroyuki Goto, Department of Industrial & System Engineering, Hosei University, Koganei, Tokyo, Japan Yoichi Shimakawa, Department of Computer Science and Technology, Salesian Polytechnic, Tokyo, Japan
ID 431: A Standby Redundant System with F-Policy
Jau-Chuan Ke, and Chia-Jung Chang, National Taichung University of Science and Technology Fu-Min Chang, Chaoyang University of Technology, Taiwan
ID 432: Barriers in Implementing Green Supply Chain Management in Construction Industry
Elizabeth Ojo and Esther T. Akinlabi, and Charles Mbohwa, University of Johannesburg, South Africa
ID 433: An Identical Parallel Machine Problem with Maintenance Activity
Wen-Chiung Lee, Feng Chia University, Taichung, Taiwan Jen-Ya Wang, Hungkuang University, Sha Lu, Taiwan
Štefan Kolumber and Petr Briš, Tomas Bata University in Zlin, Czech Republic
Iman Vasheghani Farahani, and Rasoul Haji, Sharif University of Technology, Iran
H. M. Emrul Kays, A.N.M. Karim, M. Abdesselam, Muataz H.F. Al Hazza, International Islamic University Malaysia
R.A. Sarker, University of New South Wales Canberra
ID 438: Engineering Education and Regional Economic Development
Gerrit Jordaan, Central University of Technology, Free State, Bloemfontein, South Africa
Annelies Geerts, Annelies Geerts, and Bart Van Looy, KU Leuven, Belgium
Klaasjan Visscher, and Petra de Weerd-Nederhof, University of Twente, Netherlands
ID 440: Motivation to Pursue Green Supply Chain Management
Evelyne Vanpoucke, Maastricht University, Netherlands
ID 441: Optimal Economic Manufacturing Quantity and Process Target for Imperfect Systems
Salih Duffuaa, King Fahd University of Petroleum and Minerals, Saudi Arabia
Xiang TR. Kong, George Q. Huang, and H. Luo, Department of Industrial and Manufacturing Systems Engineering, The University of Hong Kong, Hong Kong, China
ID 444: Modeling and Simulation of Automotive Engine Sub-Assembly for Production Improvement
Eno Ludavicius, Nirav Sheth and Parth Patel, Lawrence Technological University, USA
ID 445: Missing Data Imputation Method Comparison in Ohio University Student Retention Database
Dyah Hening, and David A. Koonce, Ohio University, USA
ID 446: Soft Skills through Engineering Cooperative Education Settings at Ohio University
Dyah Hening, and David A. Koonce, Ohio University, Athens, OH, USA
ID 447: Cell Loading and Scheduling in Synchronized Manufacturing Cells
Gürsel A Süer, Dyah Ariningtyas Hening and Fatih Yarimoglu, Ohio University, Athens, Ohio, USA
D. K. Banwet and Abhijit Majumdar, Department of Management Studies, Indian Institute of Technology Delhi, India
Noviana Dwi Harsiwi, and Elisa Kusrini, Menghadiri Universitas Islam Indonesia, Central Java Province, Indonesia
Zahra Safaei Koletia, Kamran Jamali Firouzabadia, and Seyed Ahmad Sheibat Alhamdya, Department of Industrial Management, Islamic Azad University Firoozkooh Branch, Iran
Navid Sahebjamnia, School of Industrial and Systems Engineering, College of Engineering, University of Tehran, Tehran, Iran
ID 451: A Comprehensive Evaluation of Direct and Indirect Network-on-Chip Topologies
Mehdi Baboli, Nasir Shaikh Husin and Muhammad Nadzir Marsono, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
Dong-Yuh Yang and Zong-Ru Wu, National Taipei College of Business, Taipei, Taiwan
Cheng-Hwai Liou, National Taichung University of Science and Technology, Taichung, Taiwan
ID 454: Empty Containers Repositioning in South African Seaports
RD Al-Rikabi, Olufemi Adetunji and VSS Yadavalli, University of Pretoria, South Africa
ID 455: An Optimization Model for Production Allocation in a Large Steel Manufacturing Company
Cucuk Nur Rosyidi, Anandhyta Yunan Perdana, and Yusuf Priyandari, Sebelas Maret University Indonesia
Endang Prasetyaningsih, Suprayogi, TMA Ari Samadhi, and Abdul Hakim Halim, Bandung Institute of Technology, Indonesia
Sagar Sikder, Indian Statistical Institute, Mumbai, India
Indrajit Mukherjee, Indian Institute of Technology, Bombay, India
Subhash Chandra Panja, Jadavpur University, Kolkata, India Sasadhar Bera, Indian Institute of Management, Ranchi, India
ID 458: A Quality Model for a Multi-Layered Sourcing Supply Chain
JrJung Lyu and Chia-Wen Chen, Department of Industrial and Information Management, National Cheng Kung University, Tainan, Taiwan
JrJung Lyu, Fan-Kuei Chiou, and Chia-Wen Chen, National Cheng Kung University, Tainan City, Taiwan
Mahendrawathi ER, Anisah Herdiyanti and Hanim Maria Astuti, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
T. Yuri M. Zagloel, Ferdinand Jahja, and Armand Omar Moeis, University of Indonesia, Depok, Jawa Barat, Indonesia
A.N.M. Karim, and Mohamed Bin Abd. Rahman, International Islamic University Malaysia Nornilawati Yosop, Hi-essence Cable Sdn Bhd, Malaysia
Saravanan Tanjong Tuan, S Automotive Industry Sdn Bhd, Shah Alam, Malaysia
A. N. M. Karim, H. M. Emrul Kays, A. K. M. N. Amin, and M. H. Hasan, International Islamic University Malaysia
ID 464: Low-Cost USB-Based Data-Logger for LVDT Sensor
Md. Saiful Islam, Md. Liakot Ali, Institute of Information and Communication Technology, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
Rifat Zaman, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
Zubaer Md Tanvir, Institute of Information and Communication Technology, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
Shaliha Anistia, University of Hawaii at Manoa, USA
William Eduardo Mosquera Laverde, Universidad Cooperativa De Colombia
ID 467: European Directives Sustainability of Biofuels and Brazilian Market, Panorama Biodiesel
Mariana Bittar, Universidade Federal do Rio de Janeiro-PRH, Brazil
Claudia Morgado, Victor Esteves, and Ofélia Araujo, Federal University of Rio de Janeiro, Brazil
ID 468: Effect of Work Instruction Support Device on Equipment Maintenance and Inspection
Seiko Taki, Chiba Institute of Technology, Japan
Yasuhiro Kajihara, Tokyo Metropolitan University, Hino, Tokyo, Japan
Síria Barros, and Paulo Sampaio, University of Minho, Portugal Pedro Saraiva, Universidade de Coimbra, Portugal
ID 471: Extend Optimal Replacement Model for a Deteriorating Systems with Inspections
Shey-Huei Sheu, Providence University, National Taiwan University of Science and Technology, Taiwan Hsin-Nan Tsai, and Fu-Kwun Wang, National Taiwan University of Science and Technology, Taiwan
ID 472: Experimental Design of a Flexible Manufacturing System
Muflih Safitra, Ali Ahmad, and Abdulrahman M. Al-Ahmari, King Saud University, Saudi Arabia
ID 473: Implementation of Lean Manufacturing through Supplier Kaizen Framework: A Case Study
Mohd Hazri Mohd Rusli, Toyota Malaysia
Ahmed Jaffar, and Suzilawati Muhamud-Kayat, Universiti Teknologi Mara, Malaysia
ID 475: Cost-Benefit Analysis of Flexible Manufacturing System (FMS)
Mohammed Al-Kahtani, Muflih Safitra, Ali Ahmad, and Abdulrahman Al Ahmari, King Saud University, Riyadh, Saudi Arabia
ID 476: Process Visualization of a Manufacturing Plant Based On Lean Concept
H.M.M.M. Jayawickrama, Department of Production Engineering, University of Peradeniya, Sri Lanka
S. Samarasena, Department of Electrical and Electronic Engineering, University of Peradeniya, Sri Lanka
A.K. Kulatunga, Department of Production Engineering, University of Peradeniya, Sri Lanka
ID 479: Study on Key Factors of Adopting Sustainable Supply Chain Management in Indonesia
Caroline Himadewi Santoso, Jinshyang Roan, and Jei-Zheng Wu, Soochow University, Taiwan
ID 480: Study on Key Factors of Adopting Sustainable Supply Chain Management in Indonesia
Caroline Himadewi Santoso, Jinshyang Roan, and Jei-Zheng Wu, Soochow University, Taipei, Taiwan
Norzelawati Asmuin, Centre for Energy and Industrial Environment Studies (CEIES), Universiti Tun Hussein Onn Malaysia
ID 482: An Optimal Inventory Policy of Tools with Maximum Allowable Lifespan
Bhaba R. Sarker, Department of Mechanical & Industrial Engineering, Louisiana State University, Baton Rouge, LA, USA Cun Rong Li, School of Mechanical & Electronics Engineering, Wuhan University of Technology, Wuhan City, P. R. China Hui Zhi Yi, Department of Mechanical & Industrial Engineering, Louisiana State University, Baton Rouge, LA, USA
ID 483: Engineering Education in the 21st Century: Malaysian Perspectives
Shahrin Mohammad, University Technology Malaysia
ID 484: Data Mining Based Strategic Decision Making Support Tool
Kemal Kilic, Sabanci University, Turkey
ID 486: On Servitization and Maintenance of Diamond Press Machines
Joe Amadi-Echendu, University of Pretoria, South Africa
ID 489: Interpretive Structural Modeling of the inhibitors of Wireless Control System in Industry
B. Jayalakshmi, and Pramod. V. R., N.S.S. College of Engineering, India
ID 490: New Indicator System for Evaluation of Land Use Efficiency
Armands Auziņš, Sanda Geipele, and Ineta Geipele, Riga Technical University, Riga, Latvia
ID 491: A Case Study about Retailing Market of Industrial Sector in Turkey
Ayşenur Erdil, University of Marmara, Faculty of Engineering, Department of the Industrial Engineering, University of Yalova, Faculty of Engineering, Department of the Industrial Engineering, Turkey
Mehtap Erdil, University of Marmara, Faculty of Engineering, Department of the Environment Engineering, Turkey Hikmet Erbiyik, University of Yalova, Faculty of Engineering, Department of the Industrial Engineering, Turkey
Soroor Alkhafaji, Baghdad University, Iraq
ID 495: Layout Design of Multiple Blocks Class-Based Storage Strategy Warehouses
Maram I. Shqair, University of Jordan, Amman, Jordan
Safwan A. Altarazi, German-Jordanian University, Amman, Jordan
ID 496: A Genetic Algorithm Based Solution Approach for the Time Dependent Vehicle Routing Problem
M. Selçuk Korkmaz, Marmara University, Engineering Management Program, Istanbul, Turkey Serol Bulkan, Marmara University, Industrial Eng. Dept., Istanbul, Turkey
Ekrem Duman, Ozyegin University, Industrial Eng. Dept., Istanbul, Turkey
Nadjib Brahimi, University of Sharjah, United Arab Emirates
ID 498: Optimization Model for the Dairy Sector
Javier D. Fernandez and Beatriz Angel, University Pontificia Bolivariana, Medellín, Antioquia, Colombia
ID 499: Optimization using Simulation of Traffic Light Signal Timings
Ahmed A. Ezzat, Hala A. Farouk, Khaled S. El-Kilany, and Ahmed F. Abdelmoniem, Arab Academy for Science, Technology, and Maritime Transport, Abu Kir Campus, Alexandria, Egypt
ID 500: Implementation of Safety Instrumented Systems Using Fuzzy Risk Graph Method
Nouara Ouzraoui, Bilal Rabah, Rachid Nait Said, and Mouloud Bourarech, Institute of Health and Occupational Safety, University of Batna, Algeria
ID 501: The Operating Decisions of Corporate Business Based on the Brusselator Model
Xiao Han and Dong Mu, School of Economics and Management, Beijing Jiaotong University, China
ID 502: Safe Backpack Mass for Students in Tertiary Institutions
Salami O. Ismaila, Department of Mechanical Engineering, Federal University of Agriculture, Abeokuta, Ogun State, Nigeria Kolawole T. Oriolowo, Department of Mechanical Engineering, The Polytechnic, Ibadan, Oyo State, Nigeria
ID 503: DMFC Models and Applications: A Literature Survey, Part I
S. Patrabansh, M. Y. El-Sharkh, and M. Alam, University of South Alabama, Mobile, USA
Raja Kočanova, Sanda Geipele, and Ineta Geipele, Riga Technical University, Latvia
Mohammad Nurdin, Polytechnic for Manufacturing of Bandung (POLMAN Bandung), Indonesia
Mostafa Pazoki and Walid Abdul-Kader, University of Windsor, Canada
ID 507: Flood Disaster Planning and Management in Jeddah, Saudi Arabia: A Survey
Shougi Suliman Abosuliman, Arun Kumar and Firoz Alam, RMIT University, Melbourne, Australia
Mohammad Abdul Mannan and Md. Tanvir Alam, Dhaka University of Engineering & Technology (DUET), Bangladesh
ID 510: Examining Relationship between Macroeconomic Variables Using Var Approach
Imran Arshad, IBA Sukkur, Pakistan
Yongrae Cho, Euiseok Kim and Wonjoon Kim, Korea Advanced Institute of Science & Technology (KAIST), South Korea
Eldon Caldwell Marín, and Mauricio Zamora, University of Costa Rica Antonio Ferrández Rodríguez, University of Alicante, Spain
ID 514: Implementation of Reverse Logistic System as a Means of Environmental and Economical Issue
Hemendra Nath Roy, Sudipta Saha, Md. Shohel Parvez, Sufal Chandra Goldar and Tarapada Bhowmick, Khulna University of Engineering and Technology, Khulna, Bangladesh
ID 516: The Impact of Job Stress to Job Satisfaction among Engineers: A Literature Review
Raja Zuraidah Raja Mohd Rasi, Universiti Tun Hussein Onn Malaysia
ID 518: A Nondominated Sorting Genetic Algorithm for Sustainable Reverse Logistics Network Design
Mohammad Asghari, Ferdowsi University of Mashhad, Mashhad, Iran
Mohammad Asghari, Department of Industrial Engineering, Ferdowsi University of Mashhad, Azadi Sq., Mashhad, Iran
Huinee AuYong and Lilis Surienty, School of Management, Universiti Sains Malaysia, Penang, Malaysia Suhaiza Zailani, Faculty of Business and Accountancy, Universiti Malaya, Kuala Lumpur, Malaysia
ID 521: Value Stream Mapping using Simulation at Metal Manufacturing Industry
Raja Zuraidah Raja Mohd Rasi, Universiti Tun Hussein Onn, Johor, Malaysia Rohana Abdullah, and Nooririnah Omar, Universiti Teknikal Malaysia Melaka
ID 522: Reconstruction of free form Surfaces in Reverse Engineering Technology Applications
Tahseen Fadhil Abbas, and Ahmed Abdullah Ebraheem, University of Technology, Baghdad, Iraq Norain Farhana Ahmad Fuaad, Universiti Kebangsaan Malaysia
ID 523: Roughness Enhancement of Parts Produced by Multi-Layer SPIF
Qasim M. Doss, Baghdad University, Baghdad, Iraq
Tahseen F. Abaas and Aqeel S. Bedan, University of Technology, Baghdad, Iraq
ID 524: A Stochastic Approach to Hotel Revenue Management Considering Individual and Group Customers
M. A. Vahdat, Sh. Golestany, M. H. Abooie and M. Honarvar, Yazd University, Iran
Amir Khalid, Universiti Tun Hussein Onn Malaysia, Johor, Malaysia
Ilham Kissani, Al Akhawayn University, Morocco
ID 528: Optimizing Inventory and Pricing Decisions for a Periodic-Review System with Batch Ordering
Ying Wei, Jinan University, China
JrJung Lyu, Department of Industrial and Information Management, National Cheng Kung University, Taiwan
ID 532: Mobile Phone APP Software Browsing Behavior using Clustering Analysis
Chui-Yu Chiu, Ju-Min Liao and I-Ting Kuo, National Taipei University of Technology, Taipei, Taiwan Po-Chou Shih, National Taipei University of Technology, Taipei, Taiwan
ID 534: Worm Optimization: A Novel Optimization Algorithm Inspired by C. Elegans
Jean-Paul Arnaout, Gulf University for Science & Technology, Kuwait
Hye-Kyung Pang, Hallym University, South Korea
Hye-Kyung Pang, Hallym University, South Korea
ID 538: The Study of Stability Control Systems for the Technological Processes
Gulnara Abitova, Mamyrbek Beisenbi and Janar Yermekbayeva, Eurasian National University, Astana, Kazakhstan
ID 539: The Description of the Control Factors on the Complex Immune System
Janar Yermekbayeva, Tolkinai Myrzakul, Onlaisyn Dauletbakova and Gulnara Abitova, L. N. Gumilev Eurasian National University, Kazakhstan
ID 540: Women Engineers-their Life Values in Australia
Susan Fenton, Fenton Partners Pty Ltd, Australia
ID 542: Studies on Manufacturing Logistics by Using Data Mining Approach
Jekka Subramanian Gnanasekaran, K.L.N. College of Information Technology, Tamil Nadu, India
ID 543: Why Lean Six Sigma Matters for Next-Gen ERP?
Anil Kumar Saini, University School of Management Studies, India
Rashmi Jha, Gitarattan International Business School (GIBS), Affiliated to Guru Gobind Singh Indraprastha University, India Aman Jha, Kalinga Institute of Industrial technology, India
ID 544: Teaching Process Safety – Development of a HAZOP Study Teaching Module
Gordon McKay, John Barford, and David C.W. Hui, Hong Kong University of Science and Technology, China
ID 545: The Influence of Innovation Performance towards Manufacturing Sustainability Performance
Mohd Razali Muhamad, and Zuhriah Ebrahim, Universiti Teknikal Malaysia Melaka, Malaysia Norsiah Hami, Universiti Utara Malaysia
ID 546: Reduce the Failure Rate of the Screwing Process with Six Sigma Approach
Nihal Erginel and Aytaç Hasırcı, Industrial engineering Department, Anadolu University, İkiEylul Campus, Eskisehir, Turkey
ID 547: A Qualitative Study of the Critical Success Factors of ERP System: A Case Study Approach
Aamir Ijaz, University of the Punjab, Lahore, Pakistan
R. K. Malik, Bahria University, Islamabad, Pakistan
Rab Nawaz Lodhi, COMSATS Institute of Information Technology, Sahiwal, Pakistan
Umie Habiba, National College of Business Administration and Economics, Lahore, Pakistan Syed Muhammad Irfan, COMSATS Institute of Information Technology, Lahore, Pakistan
ID 548: Mitigating Inefficiencies in Humanitarian Supply Chains
Colin Wee, Robert de Souza, and Jonas Stumpf, The Logistics Institute – Asia Pacific, National University of Singapore Mark Goh, The Logistics Institute – Asia Pacific, and Business School, National University of Singapore
ID 549: Application of ISO –9001: 2008 Academic Institutions
Rathindra Nath De, Bengal Engineering and Science University, West Bengal, India
ID 550: Costs of Quality and Six Sigma
Rathindra Nath De, Bengal Engineering and Science University, Shibpur, West Bengal, India
ID 551: When We Miss Disruptive Technologies
Hye-Kyung Pang, Hallym University, South Korea
ID 552: Stock Dependent Inventory Models under Parameter Uncertainty
Sungmook Lim, Department of Business Administration, Korea University, Sejong, South Korea
ID 553: Increasing Customer Satisfaction through Lean Distribution
Etna Muraira, Lorena Garzafox and Bernardo Villarreal, Departamento de Ingeniería, Universidad de Monterrey, San Pedro Garza Garcia, México
ID 554: Psychological Service Quality Analysis: A Cross-Cultural Approach
Hye-Kyung Pang, Hallym University, South Korea
ID 555: Routing Lean and Green in UPS
Patricia Molina, Katia Nuñez, Lorena Cantú and Bernardo Villarreal, Universidad de Monterrey, San Pedro Garza García, México
ID 557: A Strategic Procurement Concept for Physical Asset Management Framework
Ananda S Jeeva, and Ahmed Mohsen Salem Baswaid, Curtin Business School, Curtin University, Perth, Australia
Mohammad MRK Khadem* Md. Anisul Islam and Mahmoud Al Kindi, Department of Mechanical & Industrial Engineering, Sultan Qaboos University, Muscat 123, Oman
M.A.S. Kamal, Japan Science and Technology Agency (JST), Institute of Industrial Science, The University of Tokyo, Japan
A. John Rajan, Sathyabama University, Rajeeve Gandhi Salai, Chennai, India
ID 562: Noble Evaporative Battery Thermal Management System for EVs/HEVs
Ataur Rahman, Helmi Ahmed and MNA Hawlader, International Islamic University Malaysia, Kuala Lumpur, Malaysia
ID 563: MARKCLOUD: Software for Data Confidentiality and Security in Cloud Computing Environments
Rashidah. Olanrewaju, Saqib Hakak and Othman Khalifa, International Islamic University Malaysia, Kuala Lumpur, Malaysia
Robert de Souza, Lindawati and Zhang Xing, The Logistics Institute – Asia Pacific, National University of Singapore Mark Goh, The Logistics Institute – Asia Pacific and NUS Business School, National University of Singapore
ID 565: Implementation of Costs of Quality and Six sigma in a Small Scale Industry
Rathindra Nath De, Bengal Engineering and Science University, Shibpur, Howrah, West Bengal, India
ID 567: Bull Whip and Reverse Bullwhip Effect in After Sales Service Supply Chains
Manish Shukla, Malaysia Institute for Supply Chain Innovation, Shah Alam, Selangor, Malaysia
ID 569: A Data Synchronization Model in Mobile Electronic Medical Record for Operational Efficiency
Geoffry Heredia and Kurt Junshean Espinosa, Department of Computer Science, University of the Philippines Cebu, Lahug, Cebu City, Philippines
Jaime Caro, Department of Computer Science, University of the Philippines Diliman, Diliman, Quezon City, Philippines
S.N.N. Syed Yahya, Ati Rosemary Mohd Ariffin and Muhammad Azzam Ismail, Department of Architecture, Faculty of Built Environment, University of Malaya, Kuala Lumpur, 50603, Malaysia
Mohammad Zakir Hossain, Department of Operations Management and Business Statistics, College of Economics and Political Science, Sultan Qaboos University, Oman
Mohammad Miftaur Rahman Khadem, Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, Oman